Aircraft jobs in Clifton, New JerseyCreate job alerts

Job DescriptionDescription: Company Description: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: • Determine inspection status of aircraft in for scheduled inspection, as assigned., • Audit of inspection and maintenance work packages generated by the repair station, • during the performance of maintenance, • and repair., • Work with production personnel, Team Leaders, Lead Technicians and Technicians to, • ensure accurate and complete, • documentation of work performed in company work order packages., • Generation of maintenance record entries for aircraft, engines, propellers, and, • accessories maintained by the repair station in, • accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes, • completion of FAA forms 337 and, • 8130-3 as required., • Assist in surveillance of the repair station facilities and procedures and report results to the, • Chief Inspector., • Assist the Quality Assurance Manager and Chief Inspector in the development of, • improved methods and procedures for the, • performance of quality assurance functions., • Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the, • technical publication libraries throughout, • the repair station., • Assist the Quality Assurance Manager and Chief Inspector in the tracking and, • calibration of inspection and test equipment used, • by the repair station for the purpose of product acceptance., • The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when, • required. This report will be submitted to theFAA within 96 hours after the malfunction or, • defect has been discovered in accordance with 14 CFR§145.221., • Assist the Quality Assurance Manager and Chief Inspector as necessary in the, • receiving inspection of parts or material, • forwarded to him by the receiving inspector., • 1 Assuring proper documentation of the preliminary inspection, hidden damage, • inspection, and final inspections of all items, • processed as assigned., • Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and, • Operator/Air Carrier manuals., • Maintaining Quality Department work areas in a clean and orderly manner., • Knowledge of inspection techniques and tools within an FAA 145 repair station., • Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145., • High mechanical aptitude., • Ability to read schematics and blueprints., • Be proficient with PC and be familiar with MS office., • Knowledge of quality control., • Ability to interact with a group of coworkers., • Ability to work with complex equipment., • Ability to establish procedures., • Ability to work in a production-oriented environment., • Ability to work under frequent changing priorities., • Ability to select and evaluate priorities., • Ability to read and comprehend documentation written in the English language., • Problem-solving and decision-making skills., • Good written and verbal communication skills., • Self-starter with the ability to multi-task and prioritize workday/projects independently., • The employee must occasionally lift and/or move up to 50 pounds, • Stands at least 75% of each workday., • Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination., • High organizational, time management and logic skills required, • Ability to work at a desk in an office environment for extended periods of time, • Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization., • Minimum of five years of experience in a supervisory position in a maintenance organization., • Minimum of ten years of experience in a Part 145 environment., • Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons., • Previous Director of Maintenance or Chief Inspector experience preferred., • FAA Airframe and Power Plant Certification or license (A&P), • Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements., • Subject to pre-employment and random drug testing., • Competitive pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • Profit Share ProgramRequirements:

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: Responsible for the Quality Inspection and Testing of Aircraft, Military, and Industrial Gas and Oil production Equipment. Collect and report data to be presented to the customer for reporting purposes. The Quality Technician is responsible for providing inspection and administrative support in order to ensure that all general matters in Quality are handled timely and efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Quality Technician is a hands-on representative of the Quality department whose job is to help ensure all basic visual and test inspections are performed to ensure product integrity and compliance to all specifications at the production facilities. • Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits)., • Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s)., • Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives., • Support generation of FAI and corresponding documentation., • Review incoming FAI to ensure compliance to Collins and AS9102 standards., • Any other function(s) as assigned by management, • Maintain calibration records, • Maintain tools, • Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience, • U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract, • MSOffice skills Must possess sight/hearing senses, or use prosthetics that will enable these senses to function adequately so that the requirements of this position can be fully met. Physical activity includes walking, standing, bending, squatting, reaching above shoulders and lifting up to 40lbs. The candidate for this position may have to spend long hours using a computer, which can cause eye strain. This position will have to manage a number of requests and situations at one time. Stress may be caused by the need to complete tasks within tight deadlines. WORK ENVIRONMENT: Performs office activities in a lighted and ventilated area. May be subject to changes in temperature and exposure to dust. May be exposed to uncontrolled environmental conditions. Will work in a normally acceptable office environment, with no abnormal hazards or risks. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job Description Mission Serve as a senior technical authority in dimensional inspection, measurement systems, calibration, and CMM programming. This role ensures that every inspection method, measurement tool, and calibration activity is accurate, compliant, and capable—directly protecting PTI’s ability to deliver precision injection-molded components for aerospace, defense, and highly regulated industries. Competencies – What This Person Must Be • Master Inspector & Metrology Expert: Advanced skills in dimensional inspection, GD&T, CMM (Calypso), vision systems, fixtures, and measurement troubleshooting., • Calibration & Measurement System Owner: Ensures all tooling, gages, fixtures, and instruments are accurate, controlled, and compliant with AS9100 requirements., • Process-Minded Technician: Understands how inspection results impact production capability, customer acceptance, and risk., • Detail-Oriented & Documentation-Driven: Produces accurate records for calibration, inspection plans, tooling status, and measurement traceability., • Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability., • Leadership & Mentorship: Guides Level 1 and Level 2 inspectors and supports training on measurement equipment, methods, and inspection strategies. Key Responsibilities • Perform highest-complexity inspections and make final accept/reject decisions., • Create, update, and control inspection plans, visual standards, and metrology work instructions to help standardize inspection practices across the department., • Program and operate Zeiss CMMs (Calypso), OGP/Keyence vision systems, and other automated measurement platforms., • Develop fixturing concepts or collaborate with Engineering on inspection fixture design., • Troubleshoot measurement discrepancies, CMM program errors, and complex geometry issues., • Lead inspection readiness for customer source inspections, audits, and critical part reviews., • Own and oversee calibration ensuring all gages, fixtures, and measurement systems are properly maintained, scheduled, fully documented, compliant with AS9100, and supported through effective management of calibration records, out-of-tolerance investigations, and external vendor relationships., • Participate in dimensional-related root cause analysis, contributing measurement expertise during 8D, corrective action, and customer inquiries., • Ensure all inspection processes meet customer and regulatory requirements., • Train and mentor Level 1 and Level 2 inspectors on GD&T, inspection techniques, and equipment use. Key Metrics & KPI’s • ≥ 98% Quality Shipments., • 100% on-time completion of assigned inspections., • Zero escapes on parts inspected or approved., • Improved inspection efficiency and accuracy year-over-year., • 100% compliance with safety and quality procedures, • 100% calibration compliance, • Documented completion of inspector training and demonstrated skill improvement Required Experience and Qualifications (Subject to Management Discretion) • High school diploma or equivalent; technical degree preferred., • 5+ years of advanced inspection experience with strong GD&T and blueprint mastery, • Hands-on CMM programming using Zeiss Calypso, • Experience with OGP/Keyence or similar optical/vision systems, • Experience with calibration system maintenance/management (GAGETrak preferred),, • Strong communication, teamwork, and leadership skills. Preferred Qualifications • ASQ Certified Quality Technician (CQT), Certified Quality Inspector (CQI), or metrology-related certification., • Experience in aerospace, defense, or medical device manufacturing. Physical Requirements • Ability to work in both office and manufacturing floor environments., • Capable of lifting up to 40 lbs and accessing production and inspection equipment., • Manual dexterity for handling tools, parts, and inspection equipment., • Visual acuity sufficient to read documents, use computer screens, and inspect products or components. Work Environment • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations., • Requires use of PPE, including safety glasses, gloves, and hearing protection.Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\n\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionDescription: Company Description: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: The primary function of this role is business development, specific to private jet charter, jet card membership and aircraft sales/management. Essential Job Tasks: • Establishes sales objectives by forecasting and developing annual sales quotas for regions and territories; projecting expected sales volume and profit for existing and new products., • Maintains sales volume, product mix, and selling price by keeping current with supply and demand, changing trends, economic indicators, and competitors., • Establishes and adjusts selling prices by monitoring costs, competition, and supply and demand., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies., • Contributes to team effort by accomplishing related results as needed, • Managing multiple flights at once with accuracy., • Multi-tasking effectively, prioritizing appropriately, and providing timely communication of project(s) status., • Providing exceptional customer service skills, over the phone and in person, to our customers, vendors, and other team members., • Completing tasks and projects with a sense of urgency, working independently to solve problem., • Compiling documents into well-organized Dropbox folders to maximize efficiency., • Interacting with customers and vendors at corporate company events., • Other duties and projects as assigned. Competencies: • Proven sales executive experience, meeting or exceeding targets, • Previous experience as a sales executive, sales manager or sales and marketing director, • Ability to communicate, present and influence all levels of the organization, including executive and C-level, • Proven ability to drive the sales process from plan to close, • Proven ability to articulate the distinct aspects of products and services, • Proven ability to position products against competitors, • Demonstrable experience as head of sales, developing client-focused, differentiated and achievable solutions, • Excellent listening, negotiation and presentation skills, • Excellent verbal and written communications skills, • Work is generally performed within an office environment, with standard office equipment available, as well as at outside at customer events., • Bachelor’s degree., • Competitive salary based on experience., • Medical, • Dental, • Vision, • Paid Time Off, • 401k with a matching program, • Profit Share Requirements:

Job DescriptionDid you ever want to work in aviation but didn’t know how to break into the industry? Do you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in the industry? Did you ever wish that you could work for a company where you could grow your career? If so, Atlantic Aviation just may be the employer for you! Headquartered in Plano, Texas, Atlantic Aviation welcomes customers at more than 100 fixed base operator (FBO) locations – from the Hawaiian Islands to Caribbean islands and all points in between throughout the US. We offer a wide range of aircraft ground handling and flight hospitality services, including fueling and line services, hangar and ramp storage, modern executive terminals for passengers and crews, and much more. We are firmly committed to diversity, equity, and inclusion throughout our network and aspire to be the employer of choice in our dynamic segment of aviation. We invest in enhancements to our safety, service, technology, and strategic infrastructure in order to provide more choices, improved experiences, and better value for customers. Atlantic Aviation intends to lead the way to a more sustainable future for business and general aviation. Atlantic Aviation is “local everywhere” - providing a safe, friendly, and familiar experience across North America. To learn more about Atlantic Aviation or to make a reservation at any of our 100+ FBOs, visit AtlanticAviation.com. Website are seeking a self-motivated, safe, positive, enthusiastic individual for an immediate opening as a Custodian. This position will be responsible for the general upkeep of the company’s facilities, ensuring a clean, appealing, safe environment to both our customers and employees. Duties will include, but are not limited to: • Empty trash receptacles, • Dust mop all floors, • Vacuum all carpeted areas, • General cleaning furniture, window sills, and walks, • Record and document all cleaning functions on appropriate logs and report to General Manager, • Maintain outside of facility and parking lot (trash pickup, sweeping, etc)., • Clean any spills ASAP to prevent injury to customers or employees, • Report any major safety item for repair, • Other duties as assigned by management, • Assist maintenance operations, as neededRequired SkillsWe are proud to be an EEO/Females/Minorities/Veterans/Disabled employer. We maintain a drug-free workplace and perform pre-employment substance testing. Experience as a custodian is preferred but not required. Prospective applicants will need a strong sense of safety and customer service to apply. This position does require you to work in all weather conditions, and flexibility with your schedule is a must as we operate 24 hours a day. As a minimum requirement, each applicant must possess the following: • High school diploma or GED certificate, • Be at least 18 years of age, • A valid state drivers license and meet the company's insurability requirements, • Good communication skill, both written and oral

Job Description SOAR WITH US Dassault Falcon Jet proudly provides competitive pay, quality benefits and programs that support your career advancement and personal development. Our benefits are designed to support you and your family's health and wellbeing, help you secure a strong financial future and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): • Perform the required troubleshooting, maintenance, and repair as needed of Falcon Aircraft anywhere in the world depending on their AOG location. To include locations at various points across the Americas and the globe which could include remote areas where modern conveniences may not always be available., • Perform all stated maintenance or basic avionics tasks and associated checks, inspections and/or troubleshooting as identified on the assigned AOG or drop-in aircraft., • Identify all troubleshooting tasks and maintenance tasks to be performed and parts to be ordered for a particular AOG., • Perform status updates of work in progress to Command Center and/or Operations Manager., • Perform all work with the highest level of technical knowledge and experience, in addition to maintaining the utmost level of professionalism with customers, vendors and other flight department or customer personnel on both a personal level and also as a direct representative of the company, Dassault Falcon Jet., • Adhere to all FAA Regulations, the Dassault Repair Station Manual, Operations Manual and all other Quality Manuals and/or Regulations., • Accurately and thoroughly complete all appropriate maintenance, work order, and RTS paperwork, • Be "travel ready" within 1/2 hour during duty time and 2 hours when standby time off base., • Work unscheduled overtime as-needed based on level of AOG activity to include weekends and/or holidays. Advance notice will be provided in all cases when such notice is available to the company but due to the nature of aircraft it is rarely known in advance., • Applicants must have experience pertaining to the forecasted scope of work including but not limited to; troubleshooting, parts replacement, work order documentation, interpretation of technical documentation, customer service and communications skills., • Maintain high level of system knowledge of Falcon Aircraft, • This will be performed by working and training with Engineering Support, • Develop in depth knowledge of troubleshooting techniques and methodologies Compensation and Benefits The compensation for this position typically falls between $50 and $60 per hour. This position is eligible for overtime. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description As an aircraft detailer, you will be tasked with detailing high end private aircraft as well as assist with aircraft movements for our maintenance department. ● Perform cleaning tasks on/in/around private aircraft. ● Machine polishing of brightwork, paint polishes and sealants ● Cleaning of passenger cabins, lavatories, cockpits, & aircraft exterior ● Stocking of aircraft with general stock, as well as passenger preferences. Occasional shopping for passenger preferences, as requested by the office. ● Occasional driving missions to other airports to clean and stock Talon Air aircraft ● Greet, park, tow, move and marshal aircraft in ramp area, assist with wing-walking duties as required ● Other responsibilities as assigned.

Job Description CHOICE AVIATION SERVICES | Full Time Office Agents Summary The Office Agent provides all the customer service for accepting, processing/finalizing, and delivering air freight efficiently, timely and safely to their intended destination. Coordinates and communicates with freight forwarders/trucking companies, airlines, and ground handlers. The employee must consistently display a professional and positive image. “Lead by Example” concept is strongly promoted. Core Competencies: • Technical Competence & Knowledge, • Leadership, • Analytical, • Communication skills, • Ensure compliance with all Transportation Security Administration (TSA), Federal Aviation Administration (FAA), Customs & Border Patrol (CBP), and customer requirements., • Computer system proficiency for airline booking and load planning., • Ensure compliance with special cargo including, but not limited to AVI, HUM, VAL, and other airline specific products., • Breakdown Airwaybills (AWBs) in accordance with airline requirements., • Prepare computer manifest, carrier certificates and other records in accordance with airline procedure, including Dangerous Goods (DG) ‘Notification to Captains’ (NOTOCs), and other relevant documents. Check for accuracy and completeness., • Send special handling telexes/messages in accordance with airline requirements & regulations., • Release flights and check for completion of data transfer between computer systems to the extent possible., • Prepare Airwaybills (AWBs) and secure payment from private shippers, when necessary, as permitted by Government Regulations., • Ensure documents are filed with CBP in accordance with required deadlines., • Answer queries, tracing actions in a timely manner., • Ensure retention of required delivery records., • Initiate freight discrepancy action where required., • Monitor the acceptance of specialty products, including Valuables (VAL) & Vulnerable (VUN),, • Ensuring secure storage as required., • Monitor inbound messages, manifest inbound shipments accordingly, proactively preparing for inbound traffic after flight release by overseas stations., • Prepare breakdown & freight check in manifests for warehouse staff use, including special handling instructions or storage requirements., • Document locations received from check in process on correct tallies, verifying totals for accuracy., • Initiate discrepancy messaging as appropriate after completion of check in., • Prepare, assign documents and notification to consignees and/or brokers., • Finalize shipments in Computer systems when required., • Verify that complete shipments have been appropriately signed for and the documentation finalized., • Initiate follow-up tracing action as required for all discrepancies, in accordance with Company & customer requirements., • Must be 18 years of age., • High School diploma., • Enthusiastic about Customer Service, • Must be capable of lifting/pushing/pulling up to 70 lbs. on a regular basis., • Ability to work nights, weekends, holidays, and varying schedules., • Proficient Computer Skills, • Must be able to stand, lift, bend for an extended period., • Must successfully complete airline specific training programs and recertification

Job Description GOJET AIRLINES - A&P LICENSED MAINTENANCE TECHNICIAN LOCATION - NEWARK, NJ The GoJet Airlines' A&P Maintenance Team plays a vital role in ensuring the safety of our passengers and is a key driver of the airline's operational performance. We are looking for highly qualified, Licensed Mechanic Technicians to fill positions at our Chicago-O'Hare International Airport Line Maintenance Base. As an A&P Licensed Maintenance Technician at GoJet Airlines, you will be responsible for the inspection, repair, and maintenance of our aircraft to ensure they meet the highest standards of safety and performance. You will work closely with other maintenance personnel to troubleshoot and resolve issues, perform routine inspections, and comply with all regulatory requirements. QUALIFICATIONS/REQUIREMENTS: • Must hold an FAA Airframe and Power plant license, • Legal right to work in, and travel freely in and out of, the United States, • Must possess a minimum of high school diploma or equivalent, • Must possess a valid driver‘s license, • Legally operate company vehicles and equipment with no restrictions, • Must be able to provide your own tools, • FCC License Helpful, but not required, • DOT required pre-employment drug test, • TSA required fingerprint check for Criminal History Records Check, • Must be able to work any shift, • Must be able to read and converse fluently in English, • Must be able to lift 50 lbs., • Able to stand for extended periods of time, • Able to climb stairs, ladders, and work platforms, • Aircraft Maintenance:, • Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, avionics, and other critical components., • Conduct thorough inspections to identify and address potential issues before they become problems., • Troubleshooting and Repairs:, • Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment., • Repair or replace defective parts, ensuring all work is completed to regulatory and company standards., • Compliance and Documentation:, • Ensure all maintenance activities comply with FAA regulations, company policies, and industry standards., • Accurately document all maintenance work performed, including parts used, repairs completed, and inspections conducted., • Collaboration and Communication:, • Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations., • Industry leading pay scale $26.71/hr -$49.20/hr • Generous annual pay increase, • Performance bonuses, • Health, dental & life Insurance, • 401(k) retirement plan, • Airline travel benefits GoJet Airlines operates as a regional partner for United Airlines, providing daily flights across the U.S. and Canada. Our commitment to safety, customer service, and operational excellence has established us as a leader in the regional airline industry. Join our team and be a part of our exciting journey in the aviation world!

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Moderate physical activity. Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity., • Requires handling of average-weight objects up to 50 pounds and pushing, pulling or standing and walking for extended periods of time. Salary Range:$28.63 To $43.57 Hourly The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionDescription: Company Description: Fly Alliance, LLC is a luxury private aviation group, specializing in private jet charter, jet card memberships, aircraft sales, management parts, and maintenance. The Company has two different brands including Fly Alliance Charter, which is an FAA Part 135 charter certificate operator, focusing on high quality service to customers in the areas of aircraft sales, management division is headquartered in Stuart, Florida with offices in Teterboro, NJ, Opa Locka, FL, Palm Beach, FL and Orlando, FL, focusing on high quality to customers in aircraft maintenance. Fly Alliance is growing which is giving us the opportunity to add to our amazing staff in Teterboro, NJ. Role Objective: • Maintain and repair airframes and related components, including flight controls, hydraulics, fuel systems, and mechanical components., • Conduct the disassembly of aircraft by removing components, cleaning/inspecting and properly tagging parts for inventory. Essential Job Tasks: • Perform aircraft maintenance, inspections and repair in accordance with regulations, manufacturer instructions and company policies., • Applies technical knowledge of aircraft systems to effectively troubleshoot and determine system and equipment malfunctions., • Maintains records in compliance with FAA and Company standards., • Maintains premises of the shop facility in a clean and organized manner., • Maintains equipment and tools in serviceable and working condition., • Assist other employees in the performance of their job assignments through coaching, counseling and guidance., • Performs many other duties as assigned Knowledge, Skills and Abilities: • Knowledge of Gulfstream G-IV, Challenger 604, Hawker 800/900XP, maintenance preferred., • Knowledge of aviation procedures/servicing/maintenance, • Adapt in workplace safety best practices, • Understanding of applicable FARs, • Knowledge of computers and electronic software applications, • Ability to effectively manage multiple tasks and priorities, • Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. (Bi-lingual in Spanish is a plus), • Ability to work well as part of a team Minimum Qualifications: • FAA Airframe and Powerplant License with a minimum of 1 year of experience., • Excellent computer skills., • Must pass airport security background checks and travel for work as required., • Must have good organizational skills and ability to manage multiple priorities., • Must be able to read and write English and have good communication, writing, and problem-solving skills., • Must be able to pass DOT required pre-employment drug test. Work Conditions & Physical Requirements: • FAR Part 145 aircraft maintenance in a hangar and ramp environment, • The employee must occasionally lift and/or move up to 50 pounds, • Good vision and depth perception, • Availability during nights, weekends, & holidays as needed Travel: • Minimal travel is required Required Education/Experience: • FAA A&P license required, • 3-5 years proven experience in a similar position, • High School diploma or GED, • Has no certificate action since the date of the interview, • Has no misdemeanors or felonies since the interview date LANGUAGE SKILLS • Ability to read, analyze, interpret and understand technical procedures and governmental regulations, sometimes quickly and under stressful or emergency situations., • Able to effectively present information to and respond to questions from management, dispatch, crew, air traffic control, and the general public., • Able to speak and be understood in English, including shouted verbal commands during emergency situations. REASONING/PROBLEM SOLVING ABILITY • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Capable of interpreting a variety of multiple instructions furnished in written, oral, diagram, or schedule form., • Must be able to remain calm, think and react quickly in all types of emergency situations. DECISION MAKING & IMPACT OF ERRORS • Makes decisions to support strategic direction., • Decisions tend to be medium range and of medium significance with moderate consequences, but may in unusual situations be significant and have safety-of-flight consequences., • Decisions could require additional expenditure of resources if not sound and may impact safety., • Able to process information quickly and react in a positive manner during unexpected and/or serious situations., • Capable of controlling personal and emotional responses and acting appropriately under high levels of stress. Direct Reports: • This role has no direct reports. Work Authorization: • Must be authorized to work in the U.S. and be at least 21 years of age by 1/1/20. Compensation: • Pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • 401K – After 6 Months of Service, • Profit Share ProgramRequirements:

Job DescriptionDescription: Company Description: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: This position serves as an A&P Supervisor for Wing Aviation Maintenance (FAM). Lead technicians are responsible for all aspects of coordinating and maintaining the aircraft in accordance with the applicable General Maintenance Manual (GMM) and all applicable FARs. This includes maintenance, inspection & repair of the company’s aircraft, special tools, and ground support equipment; work order preparation, review, and completion. Safety will be the primary consideration while ensuring compliance with all State and Federal regulations, company policies, and requirements of 14 CFR Part 135 and all other applicable FARs that apply to the certificate holder. The Lead Technician position requires a high level of attention to detail, superior organizational skills and most importantly positive attitude. At times the position may require after hours and weekend work as needed to make aircraft and customer schedules. Essential Job Tasks: • Assign and monitor individual task assignments to mechanics on a daily basis., • Provide technical assistance to mechanics and work on aircraft, as required., • Ensure mechanics maintain current training status on tasks assigned., • Perform Quality Control checks on work accomplished to ensure highest level of reliability and safety., • Reports to Floor Supervisor daily and gives status of aircraft on station and man-hour utilization., • Ensure all paperwork is complete and accurate on all aircraft and components in accordance with FAM RSM/QCM., • Adhere to Company policy and procedure., • Maintain aircraft in accordance with legality, safety and reliability standards., • Will be required to perform other duties as requested, directed or assigned., • Heavy physical effort required on occasion., • Maintenance Manual Policies and Procedures., • Knowledge of Gulfstream G-IV,Bombardier Global, Hawker 800/900XP, Cessna 560XL, Latitude and Longitude maintenance preferred., • Knowledge of aviation procedures/servicing/maintenance., • Adept in workplace safety best practices., • Understanding of applicable FARs., • Knowledge of computers and electronic software applications., • High school diploma or possession of a G.E.D. certificate, • Current US Airframe and Powerplant mechanics certificate meeting the requirements of, but not limited to, FAR Part 65.83., • Prior FAR Part 135.411(a)(2) aircraft maintenance experience., • Possession of an adequate set of aircraft mechanic's hand tools., • Current driver’s license., • Ability to pass DOT background check and drug screening., • Must be able to work as a part of a team in a high-stress, fast-paced environment., • Must be a self-starter, able to work with little to no guidance., • Must be highly motivated, detail-oriented, organized, with the ability to multitask., • FAR Part 145 aircraft maintenance in a hangar and ramp environment., • The employee must occasionally lift and/or move up to 50 pounds, • Good vision and depth perception. Minimal travel is required Required Education/Experience: • Three (3) years proven experience in a similar position, • Previous Lead position or similar held, • High School diploma or GED, • Has no certificate action since the date of the interview, • Has no misdemeanors or felonies since the interview date LANGUAGE SKILLS • Ability to read, analyze, interpret and understand technical procedures and governmental regulations, sometimes quickly and under stressful or emergency situations., • Able to effectively present information to and respond to questions from management, dispatch, crew, air traffic control, and the general public., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Capable of interpreting a variety of multiple instructions furnished in written, oral, diagram, or schedule form., • Makes decisions to support strategic direction., • Decisions tend to be medium range and of medium significance with moderate consequences, but may in unusual situations be significant and have safety-of-flight consequences., • Decisions could require additional expenditure of resources if not sound and may impact safety., • Able to process information quickly and react in a positive manner during unexpected and/or serious situations. Technicians . Work Authorization: Must be authorized to work in the U.S. and be at least 21 years of age. Compensation: • Pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • 401K – After 6 Months of ServiceRequirements:

Job Description Summary The Office Agent provides all the customer service for accepting, processing/finalizing, and delivering air freight efficiently, timely and safely to their intended destination. Coordinates and communicates with freight forwarders/trucking companies, airlines, and ground handlers. The employee must consistently display a professional and positive image. “Lead by Example” concept is strongly promoted. Core Competencies: • Technical Competence & Knowledge, • Leadership, • Analytical, • Communication skills, • Ensure compliance with all Transportation Security Administration (TSA), Federal Aviation Administration (FAA), Customs & Border Patrol (CBP), and customer requirements., • Computer system proficiency for airline booking and load planning., • Ensure compliance with special cargo including, but not limited to AVI, HUM, VAL, and other airline specific products., • Breakdown Airwaybills (AWBs) in accordance with airline requirements., • Prepare computer manifest, carrier certificates and other records in accordance with airline procedure, including Dangerous Goods (DG) ‘Notification to Captains’ (NOTOCs), and other relevant documents. Check for accuracy and completeness., • Send special handling telexes/messages in accordance with airline requirements & regulations., • Release flights and check for completion of data transfer between computer systems to the extent possible., • Prepare Airwaybills (AWBs) and secure payment from private shippers, when necessary, as permitted by Government Regulations., • Ensure documents are filed with CBP in accordance with required deadlines., • Answer queries, tracing actions in a timely manner., • Ensure retention of required delivery records., • Initiate freight discrepancy action where required., • Monitor the acceptance of specialty products, including Valuables (VAL) & Vulnerable (VUN),, • Ensuring secure storage as required., • Monitor inbound messages, manifest inbound shipments accordingly, proactively preparing for inbound traffic after flight release by overseas stations., • Prepare breakdown & freight check in manifests for warehouse staff use, including special handling instructions or storage requirements., • Document locations received from check in process on correct tallies, verifying totals for accuracy., • Initiate discrepancy messaging as appropriate after completion of check in., • Prepare, assign documents and notification to consignees and/or brokers., • Finalize shipments in Computer systems when required., • Verify that complete shipments have been appropriately signed for and the documentation finalized., • Initiate follow-up tracing action as required for all discrepancies, in accordance with Company & customer requirements., • Must be 18 years of age., • High School diploma., • Enthusiastic about Customer Service, • Must be capable of lifting/pushing/pulling up to 70 lbs. on a regular basis., • Ability to work nights, weekends, holidays, and varying schedules., • Proficient Computer Skills, • Must be able to stand, lift, bend for an extended period., • Must successfully complete airline specific training programs and recertification

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Summary The Office Agent provides all the customer service for accepting, processing/finalizing, and delivering air freight efficiently, timely and safely to their intended destination. Coordinates and communicates with freight forwarders/trucking companies, airlines, and ground handlers. The employee must consistently display a professional and positive image. “Lead by Example” concept is strongly promoted. Core Competencies: • Technical Competence & Knowledge, • Leadership, • Analytical, • Communication skills, • Ensure compliance with all Transportation Security Administration (TSA), Federal Aviation Administration (FAA), Customs & Border Patrol (CBP), and customer requirements., • Computer system proficiency for airline booking and load planning., • Ensure compliance with special cargo including, but not limited to AVI, HUM, VAL, and other airline specific products., • Breakdown Airwaybills (AWBs) in accordance with airline requirements., • Prepare computer manifest, carrier certificates and other records in accordance with airline procedure, including Dangerous Goods (DG) ‘Notification to Captains’ (NOTOCs), and other relevant documents. Check for accuracy and completeness., • Send special handling telexes/messages in accordance with airline requirements & regulations., • Release flights and check for completion of data transfer between computer systems to the extent possible., • Prepare Airwaybills (AWBs) and secure payment from private shippers, when necessary, as permitted by Government Regulations., • Ensure documents are filed with CBP in accordance with required deadlines., • Answer queries, tracing actions in a timely manner., • Ensure retention of required delivery records., • Initiate freight discrepancy action where required., • Monitor the acceptance of specialty products, including Valuables (VAL) & Vulnerable (VUN),, • Ensuring secure storage as required., • Monitor inbound messages, manifest inbound shipments accordingly, proactively preparing for inbound traffic after flight release by overseas stations., • Prepare breakdown & freight check in manifests for warehouse staff use, including special handling instructions or storage requirements., • Document locations received from check in process on correct tallies, verifying totals for accuracy., • Initiate discrepancy messaging as appropriate after completion of check in., • Prepare, assign documents and notification to consignees and/or brokers., • Finalize shipments in Computer systems when required., • Verify that complete shipments have been appropriately signed for and the documentation finalized., • Initiate follow-up tracing action as required for all discrepancies, in accordance with Company & customer requirements., • Must be 18 years of age., • High School diploma., • Enthusiastic about Customer Service, • Must be capable of lifting/pushing/pulling up to 70 lbs. on a regular basis., • Ability to work nights, weekends, holidays, and varying schedules., • Proficient Computer Skills, • Must be able to stand, lift, bend for an extended period., • Must successfully complete airline specific training programs and recertification

Job Description We are actively seeking skilled Machinists, Tool Makers, CNC Operators, 4 & 5-axis Mills, Lathes, Wire Machine, CMM, Tube Bending, Inspectors and Aerospace Quality Engineers to become part of our growing team. Tube Specialties, Inc. in Tempe, Arizona is a small business that specializes in precision tube fabrication for the Aircraft/Aerospace and Defense industries. We are seeking experienced and highly skilled people. Founded in 1973, TSI is dedicated to delivering high-quality, intricate assemblies, including complex manifolds, bent assemblies, and critical components for fighter jets and anti-ballistic missiles. We pride ourselves on our commitment to excellence and innovation. TSI possesses most aerospace certifications (AS9100, NADCAP) as well as we are an E4B4 security company. Company DescriptionManufacturing Aerospace partsManufacturing Aerospace parts

Job Description Summary Incumbent is responsible for the safe, orderly and expeditious flow of air traffic through Metering Control of departure traffic on the Non-movement areas of the Newark Liberty International Airport (EWR). Dimensions of Position A Ground Management Program (GMP) operator shall support the system in a tactical and pre-tactical nature, shall work on site at EWR and shall be the primary System Operator during all times that the system is in operation. A GMP Operator shall have a thorough working knowledge of Air Traffic Management in the New York Region, in particular, the impact of fix and route availability in relation to the health of the surface operation at EWR. Incumbent works under the general supervision of the Ground Management Program Manager who relies on the incumbent to perform established duties independently. On new or revised procedures, the manager gives detailed instructions, observes, and checks work during or immediately after completion according to complexity of the task or until satisfied the incumbent is able to perform the procedure independently. Accountability • Makes decisions and recommendations involving:, • The sequence and separation of gate traffic ready for pushback and engine start., • Plans the sequence of arriving traffic, using provided electronic aids, i.e. Aerobahn, prior to arrival at the airport., • The merging of arriving and pushback traffic that will assure all aircraft equitable treatment and provide for minimum delays., • Determines the usability of and resolves problems with:, • Communications equipment, • Aerobahn Technology, • Gate Management computer programs, • EWR GMP is not a positive control facility. Incumbent will be required to communicate recommended actions to airline, airport, and FAA employees to aid them in coordinating with each other to determine when to instruct aircraft to taxi, who to follow, taxi route, intermediate hold points, route clearance limit, and frequency transfer points., • Incumbent will initiate, and respond to, necessary coordination with EWR ATCT Ground Control concerning the movements of inbound and outbound aircraft., • Execute procedures required of the local Surface Movement Guidance and Control System Plan (SMGCS) during periods of reduced visibility, execution of the local Ice Threat Management Plan during periods of aircraft anti-icing, and the local Gate Hold program when initiated by the FAA EWR ATCT., • Provide airlines with, when required, field conditions, altimeter settings, weather conditions, operating status of navigational aids and NOTAMS., • Performs lower grade level duties as necessary to meet operational requirements and for proficiency maintenance. Individuals with previous experience at one of the New York Airports are preferred. A qualified individual must have at least 2 years experience as a fully qualified, active ATC, pilot or airline dispatcher. Have the ability to deal with customers in a courteous, enthusiastic and professional manner; ability to effectively use interpersonal skills in order to resolve problems and customer complaints. Position is subject to drug and/or alcohol testing per RVA's non-DOT policy (pre-employment, random, reasonable cause/suspicion, post-accident). Applicants must be able to successfully pass a ten-year background check.

Job DescriptionJob Title: A&P MechanicJob Description We are seeking a dedicated AOG A&P Mechanic to perform maintenance on Corporate Aircraft. You will be responsible for maintaining and repairing aircraft, diagnosing mechanical issues, and coordinating with the crew and customers. You will assist the lead mechanic, ensure customer satisfaction, and maintain the service vehicle in top condition. Responsibilities • Perform diagnostic and mechanical duties on various aircraft models, including disassembly, repair, replacement, reassembly, and adjustment of aircraft systems., • Ensure work is completed timely and in accordance with established policies, procedures, and quality standards., • Check, correct, or replace complex aircraft assemblies and systems, ensuring compliance with FAR 43 documentation requirements., • Order and obtain necessary parts for aircraft repairs, ensuring cores are returned per established procedures., • Ensure all maintenance, preventive maintenance, alterations, or specialized services comply with Quality Control procedures., • Work as part of a team to meet customer expectations, assisting mechanics and avionic technicians as needed., • Assist the Lead MST in inspecting, maintaining, and servicing equipment and tooling in the mobile service vehicle, ensuring the vehicle is in safe operating condition.Essential Skills, • Hawker, Gulfstream, Challenger, Aircraft, A&P, Aircraft maintenance, Aviation, Corporate Jets, Business Jets, Cessna Citation, Cessna Aircraft, • A&P License, • 3-5 years of corporate aircraft maintenance experience, • Minimum of 3 years experience on specified aircraft products, • Ability to troubleshoot and understand manualsAdditional Skills & Qualifications, • Willingness to travel 401K Quarter Bonus Medical benefits Workplace Type This is a fully onsite position in Teterboro,NJ. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Soar With Us! Dassault Falcon Jet proudly provides competitive pay, quality benefits, and programs that support your career advancement and personal development. Our benefits are designed to support you and your family’s health and wellbeing, help you secure a strong financial future, and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! Why Join Us? Impactful Work: Your expertise will directly contribute to the safety and efficiency of our operations. Growth Opportunities: We support your professional development and offer opportunities for advancement. Collaborative Environment: Work with a team of dedicated professionals who are passionate about aviation. Ready to soar with us? Apply now and be a part of our mission to support the world's greatest business jets! JOB SUMMARY: Under the direction of the Data Manager, the Aircraft Maintenance Programs Administrator is responsible for the daily administration, maintenance and customer support functions of Dassault Falcon Maintenance-related programs. This role supports two core OEM programs: OCIP (Optimized Continuous Inspection Program): An alternative to Chapter 5 scheduled inspections. The Administrator will assist operators in understanding task intervals, interpreting aircraft maintenance program requirements and support block-based inspection methodology approved for Dassault aircraft. CATS (Computerized Aircraft Troubleshooting System): Dassault centralized troubleshooting database, used by customers to identify and resolve aircraft symptoms. The administrator will work closely with engineering and Technical Support teams to maintain an accurate symptom-to-solution library. The Aircraft Maintenance Programs Administrator will also manage aircraft maintenance data reporting, coordinate basic technical data exchanges with the aircraft OEM, support the technical documentation sales team with subscription renewals, deliver customer presentations and demonstrations. This position requires strong communication skills, aviation maintenance-program understanding, and the ability to translate technical concepts clearly to customers and internal stakeholders. MINIMUM REQUIRED QUALIFICATIONS: • Four Year College Degree in Aviation Management, Maintenance Management, Aviation Business Administration or related field; equivalent aircraft maintenance experience may be considered, • 3+ years of aviation maintenance-planning experience, including understanding of ATA Chapter 5 time-limits, scheduled maintenance concepts or inspection program logic., • Working knowledge of aircraft troubleshooting principles, such as MEL, AMM, Fault Isolation or experience as an A&P technician or equivalent maintenance role., • Ability to interpret technical documentation (AMM, MPD, Service Bulletins) and translate into guidance for customers, • Familiarity with maintenance-tracking or MRO software systems such as CAMP. Corridor, Traxxall, Veryon tracking), • Strong analytical and organizational skills, including basic proficiency in Excel for Reporting, trend tracking and data verification., • Experience supporting Dassault Falcon aircraft, • Familiarity with CRM (Customer Relationship Management tools and communication platforms like Teams and SharePoint., • FAA Airframe and Power plant Certificate (A&P), • 5 Years’ experience with maintenance and troubleshooting on Falcon Jet Aircraft, • Advanced computer skills especially Microsoft Office products, • Office environment, • Use of personal computer required Note: the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description GOJET AIRLINES - FLIGHT ATTENDANT LOCATION - NEWARK, NJ Job Description and Overview Does getting paid to travel sound like a dream job? That is exactly what our Flight Attendants do every day. GoJet Airlines is looking for friendly, professional, and enthusiastic individuals to join our crew. No previous experience is required but candidates should be committed to providing the highest level of customer service. As a GoJet Flight Attendant, you will be the sole Flight Attendant on a 50-passenger aircraft flying for United Express. The elite CRJ-550 aircraft is revolutionizing regional flying. Our Flight Attendants oversee safety and security from the boarding to deplaning process, while providing exceptional customer service and creating a memorable experience. GoJet Airlines is one of the only regional airlines that does not assign your base. The base you apply for is the base you are assigned to. What you'll do: • Set a high standard and provide remarkable in-flight service, • Demonstrate excellent dependability and punctuality, • Think independently while still being part of a collaborative team, • Handle a wide variety of situations while in continuous contact with the public, both on and off the aircraft, • Work independently and as part of a team without supervision, • Ensure the safety and comfort of our customers, • Respond to a variety of emergency and non-emergency situations (training provided), • Maintain a neat and orderly cabin environment Minimum Qualifications: • Must live within an hour and a half of the domicile you are applying to (90 miles), • High school diploma or GED equivalent required, • Two years customer service experience preferred, • Must be able to make announcements, give emergency orders, and communicate in the English language, • Must be at least 19 years of age, • Must be in possession of a valid Passport, driver’s license or state ID, and Social Security card, • Must possess the legal right to travel unrestricted to/from all states and countries (Canada), • Travel documents must remain valid throughout all phases of training and employment, • Must have the legal right to work in the United States, • Able to attend up to 6 weeks of paid training in St. Louis, MO, • Able to be on call and available to report for duty in your assigned base (reserve duty). Reserve duty may continue for an undetermined number of years., • Some physical exertion required such as the ability to stand, walk, kneel, bend, squat, push-pull and lift heavy objects, • Long periods of standing and speaking, • Ability to work in small, confined spaces and deal with turbulence, dry air, and varying noise level from aircraft engines, • Extensive travel, must be able to spend consecutive nights away from home and endure all climates, • Alternative work schedules including holidays, evenings, and weekends, • Skilled in handling difficult situations, problem solving, complaint resolution and conflict de-escalation, • Excellent communication and interpersonal skills; provide friendly reception to all customers, • Must be able to professionally represent the GoJet Airlines brand while in the Flight Attendant uniform, • $28.00/hour, • Minimum of 75 hours per month, • $2.00/hour per diem, • United Airlines Flight benefits for you an applicable family members and friends, • Medical, dental, and vision insurance, • Disability, Life Insurance, 401K, • Paid vacation after one year of service Those selected for employment must successfully complete a company paid training program at our Flight Attendant Training Center in Saint Louis, MO as well as hands on evaluation in the aircraft. Training is approximately five-six weeks in length (depending on class size). GoJet Flight Attendant candidates will be provided two complimentary training courses through the Inflight Institute. One short supplemental video course is mandatory prior to your interview, and a pre-course must be completed and have a 80% or higher score in order to attend our in-person training course in St Louis. These modules assist future flight attendants to understand the journey they are about to partake in. The Inflight Institute offers many supplemental and aircraft courses. These are not mandatory to receive an interview. Flight Attendant Course Selector Tool | Inflight Institute

Job Description CHOICE AVIATION SERVICES - Warehouse Agent | Full Time | Scheduled Hours 11:00 am - 7:30 pm Warehouse Agent is responsible for receiving and delivering import and export cargo, mail, e-commerce, or company materials, transporting cargo between terminals and/or aircraft and ramp transfers. This position requires working in a fast-paced environment with time constraints to meet cargo KPI goals. The employee must consistently display a professional and positive image. “Lead by Example” concept is strongly promoted. Agents must report to work on a regular and timely basis, reporting directly to the supervisor or designated lead. • Follow instructions received from the lead and/or supervisor., • Able to work efficiently as a part of a team as well as independently., • Attention to detail in all areas of work., • Load and unload trucks and/or aircraft within confined areas, • Operate ground support equipment, such as a bobtail, pushback, loader, or a forklift., • Push, pull and position ULD weighing up to 3200 lbs., • The ability to understand, deliver and react to specific hand signals, safety warnings and or voice commands to ensure effective communication and a safe working environment., • Delegate daily responsibilities among warehouse team members., • Follow and enforce all airline standard operating procedures., • Assist truckers with acceptance or delivery of airline cargo., • Participate in the company’s Safety Management program., • Conduct routine inspections and ensure a high level of maintenance and cleanliness of all warehouse facilities., • Must be 18 years of age., • Possess a valid driver’s license., • Must be capable of lifting/pushing/pulling up to 70 lbs. on a regular basis., • Must work mid day shift 11:00 am - 7:30 pm, • Ability to work nights, weekends, holidays and varying schedules., • The ability to work in a high-noise level environment., • Must successfully complete airline specific training programs and recertification

Job Description Responsible for the effective use of available manpower to accomplish task assignments requested by Line Manager or MAC Maintenance Control to the highest level of reliability and safety in accordance with all applicable MAC, manufacturer and FAA policies, procedures, manuals and regulations. • Assign and monitor individual task assignments on daily basis., • Ensure mechanics maintain current training status on tasks assigned., • Perform Quality Control checks on work accomplished to ensure highest level of reliability and safety., • Report to Line Manager daily status of aircraft on station and man-hour utilization., • Ensure all paperwork is complete and accurate on all aircraft and components in accordance with MAC., • Adhere to Company policy and procedure., • Maintain aircraft in accordance with legality, safety and reliability standards., • Will be required to perform other duties as requested, directed or assigned., • Heavy physical effort required on occasion., • Maintenance Manual Policies and Procedures., • Continuous mental and visual attention required. QUALIFICATIONS: • Airframe and Power Plant License., • Extensive knowledge of all aircraft mechanical systems functions and interactions., • Thorough working knowledge of all current FAA Regulations., • Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents., • Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation., • Extensive knowledge of aircraft accessories, components and other hardware., • Comprehensive knowledge of estimating hours and materials for completing projects., • Complete knowledge of aircraft fasteners and applications., • Complete knowledge of all related skill area machines, equipment and hand tools., • Ability to operate aircraft systems., • Ability to do engine "run-up" and "trim engines"., • High School diploma or equivalent., • Must have a good command of the English language, both written and verbal., • Must possess a valid driver license. SPECIAL POSITION REQUIREMENTS: • Wear appropriate PPE as designated in each work area (e.g. safety glasses, etc.), • High School diploma or equivalent, • Airframe and Power Plant License, • Must have a good command of the English language, both written and verbal, • Must possess a valid driver license, • Responsible for the maintenance performed by Class III ACMP, to include providing all maintenance documentation and applicable maintenance references TRAINING REQUIREMENTS: • General Safety, • Quality System Awareness, • Must successfully pass the basic electrical and electronic class administered by MAC WORKING CONDITIONS AND PHYSICAL EFFORT: • Work performed in a shop environment on a regular basis. Occasional travel to line stations., • Exposed to any number of elements but with none present to the extent of being disagreeable., • May work at different workstations as needs require or shifts from one station \ location to another. Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.

Job Description Part-Time, Seasonal OPENING IN EWR AIRPORT AND SURROUNDING LOCAL AREA Retirees and veterans are encouraged to apply! Security minded? Be Elite – Secure the Skies with Elite Team Logistics! This Job opening applies to the following airport code(s): Elite Team Logistics is a leading private aviation security and logistics company, renowned for our exceptional service and trusted by professional and collegiate sports teams, celebrities, entertainment professionals, charter airlines, and many more. We are internationally recognized and locally respected as the #1 most requested aviation security company. Position Overview: As a Private Aviation Security Screener with Elite Team Logistics, you will play a crucial role in ensuring the safety and security of Elite air travelers. This position offers flexible hours (by demand), paid training, compensation for travel (as needed), and the opportunity to work in a dynamic and engaging environment. Due to federal regulations, applicants must be U.S. citizens by birth or naturalization, with a birth certificate, passport, or naturalization certificate. The ideal candidate will prioritize safety and security and possess basic technical skills to navigate web-based platforms, Additional requirements are listed below. Performance Responsibilities: • Treat all information as confidential., • Project a positive, well-groomed, professional image to clients, staff, and the public in a courteous manner., • Focus on providing Elite service to all those involved with the operation., • Coordinate, secure, and set up screening locations according to guidelines, customer needs, and the environment., • Communicate effectively with private charter passengers, colleagues, clients, and other airport staff., • Verify passengers’ identities and clear discrepancies before directing them to the screening area., • Inspect passengers and accessible belongings for prohibited/hazardous items before granting access to the aircraft., • Ensure continuous supervision of screened passengers until they board the aircraft., • Assess situations and notify local law enforcement and/or the airline Ground Security Coordinator (GSC) when necessary., • Report all government tests, real weapons, injuries, and other major incidents to the supervisor immediately., • Keep the supervisor informed of needs and problems in assigned areas, maintain cleanliness of the immediate work area, and report maintenance needs., • Perform other duties as requested. Requirements: • Must be a minimum of 18 years or older, • Must be a United States citizen via birthright or naturalization (permanent residents are not eligible) to adhere to federal regulations., • Must pass and maintain a 10-year criminal history background check., • Must be able to pass a Department of Transportation drug and alcohol test and submit to random tests., • Possess a high school diploma or GED/equivalent., • Proficiency in communicating in English with diverse people., • Physically capable standing throughout a two to four-hour shift with constant bending, twisting, and lifting (up to 50 lbs.)., • Reliable transportation to and from various locations that the screener accepts., • Successful completion of all required training and ongoing certification training as needed., • Competitive pay with flexible schedules., • Paid travel for accepted assignments over one hour from the base airport., • Paid training (initial and recurrent). Note: This job description outlines primary responsibilities but is not completely exhaustive. Additional duties may be assigned based on company needs and individual capabilities. By applying for this position and providing your phone number, you agree to receive text messages from Elite Team Logistics. These messages may include updates, alerts, and other information related to our services. Message frequency may vary. Message and data rates may apply depending on your mobile carrier and plan. You can opt out of receiving text messages at any time by replying STOP. For help, reply HELP or contact our support team at We will not share your phone number or personal information with third parties except as required by law or necessary to provide our services. For more information, please review our Privacy Policy here:

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Material Planner to join our growing team! In this critical role, you’ll be responsible for ensuring the timely flow of materials to support manufacturing operations, maintaining supplier performance, and driving inventory efficiency. You'll play a key role in building strong supplier relationships and ensuring product availability—all while contributing to a culture of continuous improvement. Qualifications Key Responsibilities • Update and maintain supplier schedules to reflect accurate delivery commitments., • Proactively manage supplier performance, address delinquencies, and develop recovery plans as needed., • Communicate upcoming supplier issues to internal stakeholders, especially to the Kreisler team., • Expedite critical materials throughout the supply chain, including managing dock-to-stock processes., • Elevate material shortages or risks across the organization in a timely and solutions-focused manner., • Ensure availability of materials to meet production requirements., • Maintain optimal inventory levels—minimizing excess while ensuring production continuity., • Participate in physical inventory activities and maintain accurate inventory records., • Enter daily receipts and service transactions accurately and promptly., • Communicate clearly, courteously, and effectively with internal teams and external suppliers., • Consistently achieve 100% On-Time Delivery (OTD) performance with assigned suppliers., • Develop strong, collaborative relationships with internal teams and external suppliers based on trust, accountability, and clear communication., • Communicate with clarity and professionalism, especially when navigating challenges or delays., • Proactively identify and resolve potential issues before they impact production., • Support team alignment through open dialogue, collaboration, and a solution-oriented mindset., • Make confident, timely decisions that keep production moving and stakeholders informed., • Continuously seek improvement, staying curious, adaptable, and focused on optimizing processes. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description RESPONSIBILITIES/DUTIES: Responsible for inspection, troubleshooting and repair of aircraft to meet company, FAA and customer standards. This includes: • Fully analyzes all required blueprints, drawings, work orders and sketches in order to troubleshoot, repair and install desired product or part., • Can detect errors and correct through proper departmental channels, • Schedules items through the shop to maintain on-time deliveries, • Checks all mechanical components prior to installation to prevent damage, • Accurately estimates hours and materials for scheduled jobs, • Ability to operate all required ground support equipment QUALIFICATIONS: • Extensive knowledge of all aircraft mechanical systems functions and interactions, • Thorough working knowledge of all current FAA Regulations, • Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents, • Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation, • Extensive knowledge of aircraft accessories, components and other hardware, • Comprehensive knowledge of estimating hours and materials for completing projects, • Complete knowledge of aircraft fasteners and applications, • Complete knowledge of all related skill area machines, equipment and hand tools, • Ability to install and rig aircraft flight control surfaces, • Ability to operate aircraft systems, • Ability to do engine "run-up" and "trim engines" SPECIAL POSITION REQUIREMENTS: • Wear appropriate PPE as designated in each work area (e.g. safety glasses, etc.), • High School diploma or equivalent, • Airframe and Power Plant License, • Must have a good command of the English language, both written and verbal, • Must possess a valid driver license SUPERVISORY RESPONSIBILITY: • None TRAINING REQUIREMENTS: • General Safety, • Quality System Awareness WORKING CONDITIONS AND PHYSICAL EFFORT: • Heavy physical effort required on occasion, • Continuous mental and visual attention required, • Employees may be subject to random drug and alcohol testing under FAA regulations, • Work performed in a shop environment on a regular basis, • Occasional travel to line stations, • Exposed to any number of elements but with none present to the extent of being disagreeable, • May work at different workstations as needed, and/or shifts from one station \ location to another Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.

Job Description Warehouse Agent is responsible for receiving and delivering import and export cargo, mail, e-commerce, or company materials, transporting cargo between terminals and/or aircraft and ramp transfers. This position requires working in a fast-paced environment with time constraints to meet cargo KPI goals. The employee must consistently display a professional and positive image. “Lead by Example” concept is strongly promoted. Agents must report to work on a regular and timely basis, reporting directly to the supervisor or designated lead. • Follow instructions received from the lead and/or supervisor., • Able to work efficiently as a part of a team as well as independently., • Attention to detail in all areas of work., • Load and unload trucks and/or aircraft within confined areas, • Operate ground support equipment, such as a bobtail, pushback, loader, or a forklift., • Push, pull and position ULD weighing up to 3200 lbs., • The ability to understand, deliver and react to specific hand signals, safety warnings and or voice commands to ensure effective communication and a safe working environment., • Delegate daily responsibilities among warehouse team members., • Follow and enforce all airline standard operating procedures., • Assist truckers with acceptance or delivery of airline cargo., • Participate in the company’s Safety Management program., • Conduct routine inspections and ensure a high level of maintenance and cleanliness of all warehouse facilities., • Must be 18 years of age., • Possess a valid driver’s license., • Must be capable of lifting/pushing/pulling up to 70 lbs. on a regular basis., • Ability to work nights, weekends, holidays and varying schedules., • The ability to work in a high-noise level environment., • Must successfully complete airline specific training programs and recertification

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$24.56 To $28.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Soar With Us! Dassault Falcon Jet proudly provides competitive pay, quality benefits, and programs that support your career advancement and personal development. Our benefits are designed to support you and your family’s health and wellbeing, help you secure a strong financial future, and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! Why Join Us? Impactful Work: Your expertise will directly contribute to the safety and efficiency of our operations. Growth Opportunities: We support your professional development and offer opportunities for advancement. Collaborative Environment: Work with a team of dedicated professionals who are passionate about aviation. Ready to soar with us? Apply now and be a part of our mission to maintain the highest standards in aircraft maintenance! Job Summary: Under direction of the Manager, Digital Transformation, the Digital System Support Analyst will be responsible developing solutions for our Customer Service IT group as well as providing customer support for both internal and external customer digital products and services. The Digital System Support Analyst is a service-oriented, critical thinking individual who is passionate about reacting to customer feedback and providing actionable information to ensure IT and Customer Service are fully integrated on a continuous basis to increase business capability and value, reduce cost and risk, and foster innovation. Principal Duties: DIGITAL PRODUCTS SUPPORT • Track, prioritize and process incoming customer requests for service access and support, • Identify, record, analyze and provide solutions to problems and incidents based on documented known errors, • Work with internal and external project teams to aid in the design, development, deployment and post-delivery support of customer service digital products and services, • Works closely with IT to ensure that during major service disruptions that affect our digital products, services to ensure the impact to users is minimized, • Lead the efforts in the build, test and release of new or upgraded digital services and business systems, • Ensure there is a proper knowledge transfer to enable customers and users to optimize use of services that support their business activities, • Leads testing efforts for new systems and improvements, • Ensure that new or changed services and systems are capable of delivering the agreed utility and scope, • Communicates actionable items and required changes to IT development teams, • Works with Customer Service personnel to identify and understand product enhancement requests, • Manages organization’s expectations effectively, • Responsible for introducing new initiatives to end users, • Suggests areas for improvement in internal processes along with possible solutions, • Leads internal teams/task forces Bachelor’s degree in information technology or 3 years related work experience 2+ years of analyzing data to identify trends and manage data quality 2+ years of experience supporting customer-facing portals, or digital services in aerospace or regulated environment Prior involvement in digital product support or lifecycle management Working knowledge with Microsoft Power Apps (Power Automate, Power BI or CoPilot Studio) Must possess a strong sense of urgency and have the ability to independently manage development projects and customer support tasks simultaneously Highly self-motivated and independent Excellent communication / customer service skills Strong understanding of Microsoft 365 ecosystem (Teams, Outlook, Permissions, User Support) Ability to troubleshoot across multiple platforms and coordinate with internal IT teams when needed Additional Desired Qualifications: Understanding of basic aircraft systems and technical publications Proficiency with Power Automate and SharePoint Development Working knowledge of SAP (User level familiarity and navigation) Proficient with SAP and able to provide support/problem solving Experience with programming (Java / Python...etc.) Fluent in French Working Conditions: Office environment Use of personal computers required Minimal travel may be required Compensation and Benefits The compensation for this position typically falls between $70,000 and $75,000 per year. This position is not eligible for overtime. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.