Trabajos aircraft en Tulsa, OklahomaCrear alertas

Job Description The UH-60 Black Hawk helicopter is the best-in-class, multi-mission performer used for combat assault, search and rescue, medevac, and firefighting missions. Your responsibility as the UH-60 Utility Helicopter Repairer will be to sustain the longevity and reliability of these aircraft, keeping them ready for tomorrow’s mission today. In this role, you will be responsible for supervising and performing maintenance on Black Hawk helicopters to ensure that these aircraft remain safe and ready to fly. This includes all requisite inspections, service, and maintenance of aircraft and subsystems. Job Duties • Remove and install aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions and mechanical flight controls, • Service and lubricate aircraft and subsystems, • Prepare aircraft for inspections and maintenance checks, • Assist in diagnosing/troubleshooting Some of the Skills You’ll Learn • Engine disassembly and repair, • Repair of aluminum, steel and fiberglass airframes/coverings, • Fix hydraulic, fuel and electrical systems Helpful Skills • Preference in mathematics and shop mechanics, • Ability to use hand and power tools Through your training, you will develop the skills and experience to enjoy a civilian career with aircraft manufacturers, commercial airlines, and government agencies. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an UH-60 Utility Helicopter Repairer consists of 10 weeks of Basic Combat Training, where you'll learn basic Soldiering skills, and 15 weeks of Advanced Individual Training. Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! • This job is a member of the Base Maintenance Team within the Integrated Operations Division. Responsible for supervising a team of Crew Chiefs and mechanics as a key member of the dynamic and fast-paced American Airlines Maintenance organization. • Leads by example, coaches our team members to success and builds trustworthy relationships, • Manages the daily Production requirements through subordinates, • Ensures team members are following procedures in order to ensure maximum efficiency, compliance and safety, • Leads staff to ensure team member's skills are utilized to the highest degree possible; leads coordination with Maintenance Training to ensure on-going enhancement of staff and skill set, • Conducts regular meetings with Business Reviews and Boardwalks to ensure best possible communication, identification, and resolution of action items, • Monitors the coordination of maintenance manpower requirements overtime and consistency with program scheduling and priorities, • Maintains effective communication between Maintenance, Engineering, Facilities Maintenance and other Supply Chain groups, • Ensures team members know, understand and are engaged in achieving critical Metrics and key performance indicators, • High School Diploma or GED equivalency, • 3 years of aircraft maintenance experience, • FAA Airframe & Powerplant Certificate, • Must pass FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable, • 1 year leadership experience supervising production operation in an area related to heavy/shop maintenance, • A&P License, • Strong working knowledge of the GPM and SPPM, • Understanding of Airline/Technical operations, • Knowledge of audit requirements, • Knowledge of labor reporting and crew utilization, • Strong interpersonal and PC skills, • Ability to concurrently manage multiple areas of responsibility., • Excellent analytical, organization and planning skills, • Must pass a background reference check and criminal fingerprint check, • Ability to work effectively with all levels of team members Feel free to take advantage of all that American Airlines has to offer: • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Navy Doctor Becoming a doctor is one of the most challenging paths you can choose for yourself. You have to want it, and to know why you want it: to help people, to heal sickness and cure disease, to solve medical mysteries and make scientific discoveries. The reasons for becoming a doctor are noble, but there are plenty of distractions once you hit the real world. Running your own office means watching insurance reimbursement rates dwindle while exorbitant malpractice insurance premiums skyrocket, all while dealing with healthcare industry red tape and staffing. But as a Navy Physician, all those nuisances are handled for you-from cutting through the red tape to covering the expenses-so you can focus on what really matters: treating the Sailors and Marines who keep our country safe and the families who support them. Navy Physicians also: Earn excellent compensation in an established, thriving practice Experience manageable patient ratios for high-quality, one-on-one care Receive hands-on experience and Navy-funded advanced training Enjoy a flexible schedule that leaves more time for family and personal pursuits Officers in the Navy Medical Corps are afforded the opportunity to attend the medical school of their choice and graduate debt-free through our scholarship and loan repayment programs. From a sign-on bonus of up to $800,000, and up to 100% tuition coverage, to a generous housing allowance, the education opportunities and financial rewards stack high for those pursuing a career as a Navy Physician. When you choose to invest your skills in the Navy, we invest in your future. Want to start your journey with the Navy? Apply Now Officer None Navy Medical Corps: What to Expect Medical Corps Officer - Physician Internal & Family Medicine Orthopedic Surgeon Histopathology Anesthesiology General Surgeon More Information Responsibilities As a Navy Physician and Officer in the Navy Medical Corps, you will lead the highly respected Navy healthcare team as you provide high-quality medical care for Sailors, Marines, service members, their families and, when called upon, the population at large. In this role, you may be called upon to: Diagnose ailments and treat injuries Work at the best military medical facilities on shore, at sea and in the field Join top health care professionals on the highly valued Navy health care team Collaborate with fellow military doctors and other health care officers, and partner with International Relief Teams and organizations, such as FEMA, USAID and Project Hope Operate as a leader within your focus area and get exposure outside your specialty Gain management experience that will serve you well throughout your career Navy Medicine offers practice opportunities in more than 30 specialty and subspecialty areas: Aerospace Medicine Anesthesiology Dermatology Emergency Medicine Family Medicine Fleet Marine Corps Medicine Geriatrics Internal Medicine Allergy/Immunology Cardiology Endocrinology Gastroenterology Hematology/Oncology Infectious Disease Nephrology Pulmonary/Critical Care Rheumatology Neonatology Neurology Nuclear Medicine Obstetrics/Gynecology Occupational Medicine Ophthalmology Osteopathic Medicine Otolaryngology Pain Management Pathology Pediatrics Physical Medicine Plastic and Reconstructive Surgery Preventive Medicine Psychiatry Radiology Diagnostic Radiology Interventional Radiology Radiation Oncology Sports Medicine Surface Medicine Surgery Cardiothoracic Surgery General Surgery Neurosurgery Orthopedic Surgery Transfusion Medicine Tropical Medicine Undersea/Diving Medicine Urology Work Environment Navy Physicians work in a variety of settings, including military medical facilities, ships, and field hospitals, both domestically and internationally. As a Navy Physician, you can work at one of the highly acclaimed National Naval Medical Centers in Bethesda, MD; Portsmouth, VA; and San Diego, CA. You might even provide medical support to deployed troops aboard one of two dedicated hospital ships-the USNS Comfort and USNS Mercy. Still more opportunities are available aboard a surface ship, working closely with a nearby aircraft squadron, or with the Fleet Marine Force. Reserve Physicians primarily drill one weekend a month at a location near their home. Training & Advancement Upon graduation from medical school, those pursuing a Physician position are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Here they learn about the military structure of the U.S. Navy, its rich history of traditions and customs, leadership development and military etiquette. Once that training is complete, you will learn the ins and outs of life as a Navy Physician at your first assignment. Promotion opportunities are regularly available but competitive and based on performance. Post-Service Opportunities Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields. Education Opportunities The Navy offers generous scholarships, financial assistance and continuing education programs, allowing you to finish your education with little or no debt. In the Navy, you'll learn to lead others, further distinguishing your career, enhancing your credentials and expanding the boundaries of your expertise. Plus, if you're a student or resident, you can concentrate on your education or training, with no military/training obligation until after your program is completed. For Students: The Navy may pay for your medical education, and you don't need to attend a military medical school. Attend a school of your choice and you may emerge debt-free. With the Navy Health Professions Scholarship Program (HPSP), you may receive 100% tuition coverage during medical school, plus a monthly stipend, reimbursement of expenses and up to $20,000 sign-on bonus. With the Navy Health Services Collegiate Program (HSCP) , you may receive from $157,000 to $269,000 while attending medical school. This includes a monthly military salary, a housing allowance, and a comprehensive health care benefits package. For Residents: Residents may get supplemental income in medical residency through the Navy Financial Assistance Program (FAP), which may offer you $275,000 or more during your medical residency, including an annual $45,000 grant, a monthly stipend and reimbursement for out-of-pocket expenses. For Practicing Physicians: Practicing physicians can receive a sign-on bonus of up to $800,000 if they qualify. All offers have many variables. To get details and find out which offer would benefit you most, request a medical recruiter contact you. Qualifications & Requirements A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. You must also attend Officer Training. There may be exceptions to the degree requirements based on extensive service experience. Additional qualifications include: Be a U.S. citizen currently practicing in the U.S. Be a graduate of an eligible medical school accredited by the AMA or the AOA Have completed one year of graduate-level medical education in a program approved by the AMA or AOA (interns currently in training may also apply) Have an MD or DO degree Have a current state medical license within one year of entering the Navy Medical Corps Be willing to serve a minimum of two years of Active Duty Be between the ages of 21 and 64 (qualified candidates over the age of 64 will be considered on a case-by-case basis) Be in good physical condition and pass a full medical examination General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities in the Navy Reserve Medical Corps Serve your country as a physician and part-time Navy medical officer. Navy commissioned physicians attend to service members and their families. They have opportunities to participate in humanitarian relief efforts at home and around the world. They work at state-of-the-art military medical facilities and have access to advanced training and technology, including those not yet available to civilian providers. Navy healthcare offers the ability to focus on the finer points of medicine without the financial and business complications of private practice. Physicians in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met. Navy Physicians also: Experience manageable patient ratios for high-quality, one-on-one care Receive hands-on experience and Navy-funded advanced training Enjoy a flexible schedule that leaves time for family and personal pursuits As a Navy Physician and an Officer in the Navy Medical Corps, you will help lead the highly respected Navy healthcare team as you provide high-quality medical care for Sailors, Marines, other service members, their families, and, when called upon, humanity at large. You will handle everything a typical physician does, such as diagnosing ailments, treating injuries, and saving lives. You also can move beyond routine: Work at the best military medical facilities on shore, at sea, and in the field Teach and mentor medical students, post graduate trainees, and more junior colleagues Collaborate with fellow military doctors and other healthcare officers, and partner with International Relief Teams and organizations, such as FEMA, USAID, and Project Hope Operate as a leader within your focus area and get exposure outside your specialty Gain leadership and management experience that will serve you well throughout your medical and military career Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. US Navy Reserve Medicine Serving part-time as a Reservist, your duties will be conducted during your scheduled drilling and training periods. During monthly drilling, Physicians in the Reserve typically drill at a location close to their homes. This gives the flexibility to expand your medical experiences in the Navy without compromising your civilian practice at home. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent. Furthermore, serving as a Reservist physician allows for unique and exciting experiences beyond patient care. Career-long learning in areas within and beyond medicine is both the goal and expectation. You will have the opportunity to shape policy, teach, lead and mentor young men and women, and, if you choose to do so, potentially fly with aviators, sail on ships, dive with the submariners, and/or serve alongside Marines and special operators. Pulmonary and Critical Care physicians serve essential roles as critical wartime specialists in the military healthcare system. Their efforts in our nation's conflicts have contributed to innovations and advancements in medical care because of their unique qualifications and training, military experiences and/or by their proximity to armed conflicts. These efforts have contributed to unprecedented survival rates in the recent Afghanistan and Persian Gulf conflicts. Pulmonologists and Intensivists also worked on the front lines of the Department of War's COVID-19 pandemic medical response. For the required two week annual training, physicians may serve anywhere, whether at sea, in hospitals stateside, or in bases and camps in countries around the world. Benefits include: Repayment of qualified education loans to the lending institution, paid annually while serving Annual bonuses for critical wartime specialists Post 9/11 GI Bill (May transfer many of the benefits to immediate family members) No-cost or low-cost medical and dental care for you and your eligible family members Full Morale, Welfare, and Recreation Privileges (golf, gym, RV camping, movie theater, and discounted event tickets) Stay at DoW lodging located on or near U.S. military installations for both duty and recreation Military Commissary and Exchange Privileges Space "A" Availability for Air Travel VA Home Loans Miscellaneous military discounts with your military-issued ID card Enrollment in the Uniformed Services Blended Retirement System Specialized training to become a leader in medicine Flexible drilling opportunities Any one of these three generous financial offers: Up to $50,000 per year in specialty pay Up to $250,000 in medical school loan repayment assistance An immediate one-time sign-on bonus of up to $10,000 Navy Reserve Sailors joining the Navy Medical Corps as residents can get a monthly stipend in excess of $2,200 while completing their residency. Offers based on service commitment. For complete offer details, request a medical recruiter contact you. Job Requirements: MD or DO degree from an accredited U.S. school of medicine or osteopathy; foreign graduates may apply with a permanent certificate from the Educational Council of Foreign Medical Graduates (ECFMG) Current license to practice medicine in the United States, District of Columbia, or Puerto Rico Eligibility for board certification Completion of at least one year of an approved graduate medical education program Between 21 and 42 years of age (waivers may be granted on a case-by-case basis up to age 68) For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again. For current or former Officers of military branches other than the Navy (OSVET), as well as for Officer candidates without prior military experience: Officer Candidates are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy. Compare Navy Careers See how a career as a Physician compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Job Description Will train on 1st shift M-F 7:30am-4pm, then move to 2nd shift M-F 3pm-11:30pm Job Duties: • Inspects materials, parts, and products at internal and external receipt including different stages of production as well as from outside processing operations., • Records observations, certificates of conformance, may provide first article inspection support, • Create NCR’s if parts are Nonconforming, • Ensure work orders and parts from outside processing are inspected appropriately, matched, and sent for final operations., • Inspection of Sealing, Electrical Bonding, Part Configuration, Detail part orientation, final assembly to blueprint requirements, • Inspection of shot peen parts, chemical process, painted parts to specifications and blue print requirements, • High school diploma or equivalent, • 2 years of quality inspection experience in an aerospace manufacturing environment, • Must possess excellent communication skills both written and oral., • Ability to work on a team as well as independently., • Must have strong organizational skills., • Must be proficient in MS Office applications., • Must be able to read, analyze, and interpret blue prints, general procedures and government regulations., • Must be able to interpret and understand OEM specifications, • Knowledge of measuring equipment (e.g. micrometers, calipers, height gages, Isoscope etc.)Company DescriptionWhether you want to change careers or find yourself unemployed, Summit Employment can help you land the right job, with the right company. We will assess your skills, experience, background, and past performance through a customized interview process to help gauge the best opportunities possible.Whether you want to change careers or find yourself unemployed, Summit Employment can help you land the right job, with the right company. We will assess your skills, experience, background, and past performance through a customized interview process to help gauge the best opportunities possible.

Job Description Position Purpose: Aerospace sheet metal and composite experience preferred. In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle Duties and Responsibilities: Essential Functions: 1. Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents., 2. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps., 3. Perform conformity/first article inspections to ensure compliance with FAA approved procedures., 4. Ensure the proper use and storage of area tools and equipment., 5. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: 1. Provide technical support to manufacturing personnel., 2. Perform area inspections to ensure compliance with applicable standards and specifications., 3. Participate in continuous improvement activities. Perform other duties as assigned. Education and Work Experience Requirements: High School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required. Other Requirements: 1. Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. TEL Staffing specializes in matching individuals with quality Employers. We take your skills, passion, and goals into account, in order to find you rewarding and challenging opportunities. For over 15 years, TEL Staffing & HR has helped hundreds of hard-working business owners simplify their lives and maximize their profits by providing them with the very best in human resource (HR) solutions, workers' compensation insurance protection, payroll, and tax processing services. We also provide our customers with the ‘right fit’ when it comes to health care, employee benefits, life insurance, supplemental insurance, professional staffing solutions, and financial investment strategies through our personalized care and world-class strategic partnerships.TEL Staffing & HR, or TEL (pronounced ‘tell’), is the leading full-service PEO (Professional Employer Organization) on the Gulf Coast today.\r\n\r\nTEL Staffing specializes in matching individuals with quality Employers. We take your skills, passion, and goals into account, in order to find you rewarding and challenging opportunities. \r\n\r\nFor over 15 years, TEL Staffing & HR has helped hundreds of hard-working business owners simplify their lives and maximize their profits by providing them with the very best in human resource (HR) solutions, workers' compensation insurance protection, payroll, and tax processing services.\r\n\r\nWe also provide our customers with the ‘right fit’ when it comes to health care, employee benefits, life insurance, supplemental insurance, professional staffing solutions, and financial investment strategies through our personalized care and world-class strategic partnerships.

Once an aircraft launches off a carrier, pilots depend on their jet's complex electronic systems to operate all areas of their craft and complete their mission. There is zero room for failure. That's why Aviation Electronics Technicians are carefully trained to maintain all aviation electronic systems, from navigation and radar to tactical displays and warfare sensors. You'll become in expert in understanding, troubleshooting and repairing every component so that each aircraft is prepped for mission success. Want to start your journey with the Navy? Apply Now Enlisted None What to Expect Aviation Electronics Technician More Information Responsibilities As an Aviation Electronics Technician (AT), you'll maintain, troubleshoot, repair and test complex electronic systems related to aviation on tactical jets, fixed wing aircraft or rotary winged helicopter systems. In this role, you can expect to work with systems including digital computers, fiber optics, infrared detection, radar, laser electronics, navigation, pressure indication, and electrical power generation and distribution. Additional responsibilities may include: • Installing modifications to aircraft electronic systems, • Performing micro-miniature module repair on computer circuit cards, • Performing electrical diagnostics, • Reading electrical system diagrams, • Repairing and maintaining power generators and electric motors, • Performing scheduled maintenance and corrosion control Work Environment Sailors in this career field will perform duties at sea and ashore around the world. ATs can expect to work indoors and outdoors in land-based aircraft squadrons and aboard aircraft carriers. You may work in a shop environment, clean lab, airplane hangar or office environment. Training & Advancement Upon completion of initial training at Recruit Training Command Great Lakes(known as Boot Camp), you'll report for specialized training, including: Class "A" Technical School (19 weeks) in Pensacola, FL, for training in basic aviation theory and technical knowledge, aviation electrical systems, and electrical and electronics theory and skills. After you complete training, you may be assigned to a naval air station, squadron, aircraft carrier or other aviation facility. Promotion opportunities are regularly available but competitive and based on performance. Advanced Training Advanced training as an Aviation Electronics Technician may also be available during later stages of your career. For those with further leadership aspirations and a college degree, Officerroles may be available, providing opportunities to lead and train others. Post-Service Opportunities Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world, such as employment with airlines or aircraft manufacturers. Education Opportunities Beyond offering access to professional credentials and certifications, Navy technical and operational training as an Aviation Electronics Technician can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements A high-school diploma or equivalent is required to become an Enlisted Sailor and an Aviation Electronics Technician. You must also be a U.S. citizen eligible for security clearance. AT applicants should have an interest in aviation, working with aircraft, electrical systems and computer systems. You should be competent working with tools, equipment and machines to perform detailed precision work. Strong arithmetic, writing, speaking and academic study skills are also necessary. Important physical attributes include a high level of manual dexterity and physical fitness. General qualifications may vary depending upon whether you're currently serving , whether you've served before or whether you've never served before . Part-Time Opportunities Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Aviation Electronics Technicians in the Navy Reserve typically work at a location close to their homes. For annual training, you may serve anywhere in the world, including locations in the U.S., at bases overseas, or in areas where humanitarian needs are great. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that. Aviation Electronics Technicians in the Navy Reserve serve in an Enlisted role. Before receiving the ongoing professional training that comes with the job, initial training requirements must be met. For current or former military Enlisted service members, prior experience satisfies the initial Recruit Training requirement, so you will not need to go through Boot Camp again. For those without prior military experience, you will need to meet the initial Recruit Training requirement by attending Boot Camp in Great Lakes, IL. This training course will prepare you for service in the Navy Reserve and count as your first Annual Training. Compare Navy Careers See how a career as an Aviation Maintenance Administrationman compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Overview This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing Company, supporting Spirit's Commercial Business Units ("Spirit Commercial"). Spirit Commercial designs and builds commercial aerostructures, including for Boeing Commercial Airplanes, one of Boeing's three business units and the premier manufacturer of commercial jetliners for decades. Spirit Commercial's core products include fuselages, pylons, nacelles and wing components, with a focus on innovative composite and aluminum manufacturing solutions. Responsibilities Location: Tulsa, OK Position Responsibilities: • Move and/or obtain correct parts, materials, and tools, as necessary within the employee's assigned area as directed by management., • Use of all precision measuring instruments required to accomplish work assignments., • Capable of accessing and navigating electronic systems as required by the position program, and/or company. Company will provide training as required in a timely manner., • Works safely and maintains a safe work environment adhering to established company safety requirements., • Train, coach and/or assist fellow employees as requested or required by the company., • Maintain and utilize required personal certifications and qualifications as directed by the company to perform job assignments., • Ensure equipment and tool certification occurs per procedure., • Report job handicaps such as: errors in parts, procedures, tools, sequences, etc. Other Duties: • Read and interpret blueprints, drawings, specifications, planning documents, sketches, engineering orders, electronic work instructions, charts, and graphs to determine the methods and sequences of operations required to support processing and painting operations., • Set up and operate chern-mill processing equipment to remove specified amounts of metal from sheet metal parts, and assemblies, extrusions and forgings utilizing etching solution, includes developmental. Experimental, first run and parts with non - symmetrical surfaces, radial tapers, deep draws, or complex contours., • Set up and operate, adjust, and regulate various types and sizes of ovens and furnaces and quenching tanks to heat treat metal parts made from aluminum, titanium, stainless steel, and other similar metals. Load on racks to minimize warpage and obtain even heat. As necessary operate hand and power moving and lifting equipment to place parts in ovens furnaces, and baths and quench., • Set up operate processing equipment to anodize and electro plate or clean metal parts and assemblies. Determine sequences of dips and rinses, position parts and electrodes, calculate and adjust immersion times, temperatures, and voltage amperage levels. Check and maintain processing solutions and chemicals in tanks as required., • Set up and operate various types of paint spraying equipment or dip, roll and brush interior, exterior prime, protective or finish coats on aircraft, automobiles, trucks, trailers, parts and assemblies., • Thin and mix paints and other surfacing materials., • Set up and operate robotic spray coating equipment by selecting and loading program tapes, masking material surfaces, mixing blend coating material and controlling spray flow rates, pressures, plume geometry and robot travel speed and pattern., • Apply finish coats where, difficult access and special care must be taken to avoid runs and inconsistencies of coat thickness, a baked smooth or wrinkle finish is required, assemblies require hand brushwork., • Operate robotic spray coating equipment to apply radar absorptive materials to surfaces., • Perform rework and touch-up when tests disclose rework necessary. Basic Qualifications (Required Skills/Experience): • All Candidates must pass the WorkKeys Assessment (___) or provide verification that they have passed the WorkKeys Assessment. Delay in completing your WorkKeys Assessment will result in a delay in your start date. You may complete your assessment in advance of an interview., • IMPORTANT WorkKeys note: Any person scheduling their WorkKeys Assessment will be required to present two (2) forms of identification to be verified before their scheduled date for the WorkKeys assessment. Please click and review this provided link ___ and plan ahead by deciding which documents can be located or if need be, ordere, • Must be willing and able to work any shift.Preferred Qualifications (Desired Skills/Experience): This is a union-represented position. Drug Free Workplace: We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: We strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $20.00/hour, with potential to earn up to $32.69/hour in accordance with the terms of the relevant collective bargaining agreement.

Job Description Available positions at these current locations of Tulsa, OK and Savannah, GA. • Aircraft Tech, • Adv Composite Tech, • Avionics/Elec Tech, • Cabinet Maker, • Interior Install Tech, • Sr. Aircraft Painter, • Sr. Upholstery Tech, • Structural Mechanic Aircraft Tech - Daily Responsibilities & Requirements • High School Diploma or GED required., • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required., • Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures., • Communicate as required to receive and understand work assignments., • Perform complex aircraft inspections, repairs, and modifications with minimal supervision., • Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers., • Ensure that all work accomplished meets quality standards and specifications., • Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely., • Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.), • Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas., • Provide training to less experienced technicians., • Protect customer property (PTP)., • Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered., • Implement and apply Lean/continuous improvement processes to all areas of responsibility., • Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use., • Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk., • Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders., • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned., • Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Structural Mechanics - Daily Responsibilities and Requirements • High School Diploma or GED required., • 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred., • In a team-oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations., • Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft., • Rivet structural assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure., • Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents., • Check all work and ensure a defective free assembly prior to final inspection., • Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs)., • Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information., • Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity., • Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required., • Able to work with minimal supervision on duties and tasks., • Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.), • Properly use and maintain company-provided tools and equipment and returns items to tool room after use., • Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags., • Ensure accurate daily job charging to the aircraft., • Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership., • Assist in maintaining shop equipment and associated JSAs., • Support Lean Activities Perform other duties as assigned., • Must be able to read and interpret blueprints., • Basic computer skills and basic shop math skills., • Must be able to read a scale and perform basic shop math., • Read and comprehend basic documents and instructions., • Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules., • Must demonstrate good housekeeping and safety practices., • Ability to work with composite resins and materials., • Must be able to work any shift., • Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs 10. Must be able to read, write, speak, and understand the English language Avionics/Elec Tech - Daily Responsibilities and Requirements. • High School Diploma or GED required., • Four (4) years experience in an avionics/electrical career field or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. FCC preferred. NCATT preferred., • Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements., • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting., • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system., • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems., • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring., • Performs and complies with engineering changes and modifications as required., • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability., • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection., • Tests and maintains test equipment, electronic systems, and components., • Complies with the company FOD program, tool control program, 5-S program and all safety regulations., • Adapt to sudden schedule changes., • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required., • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs., • Ability to read and interpret basic blueprints and schematic diagrams., • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written., • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Pay Rate is based on location, and experience. Per-diem and Overtime depend on locations. Company DescriptionAt Astro Dynamic Group, our mission is to empower businesses by connecting them with top-tier talent who excel in their fields. We drive growth, innovation, and success by matching exceptional candidates with companies in need. Our goal is to build long-lasting partnerships rooted in trust, expertise, and mutual benefit.At Astro Dynamic Group, our mission is to empower businesses by connecting them with top-tier talent who excel in their fields. We drive growth, innovation, and success by matching exceptional candidates with companies in need. Our goal is to build long-lasting partnerships rooted in trust, expertise, and mutual benefit.

Job Description TAT Technologies is recognized as a world leader in the Aerospace Industry. As the premier choice for Heat Transfer manufacturing and MRO, TAT Technologies Tulsa Site provides high-value alternatives to Commercial, Regional, and Rotary Aircraft customers worldwide. TAT Technologies Tulsa Site is also a premier in the Defense Industry. As the preferred choice for Heat Transfer new manufacturing and MRO, TAT-Limco affords the best-value solutions for our Military customers globally. This role is responsible for personnel and productivity management on second (2nd) shift. The second shift work hours are typically 3:00 pm to 11:30 pm Monday through Friday with overtime and occasional weekends as business demand requires. As the second shift supervisor, you will supervise manufacturing operation of assigned department by implementing operation strategies that guide an assigned department to achieve business results; primarily focused on working with department leadership and employees to achieve production and quality goals while maintaining a safe working environment at all times. An effective supervisor you will possess a certain set of skills directly corelated to your area of assignment. You should be a confident leader who can successfully and continuously motivate your teams. You will be a part of the Operations leadership team and will be responsible for conducting effective tie-ins with first shift supervisors. Job Description Details • Oversee the production processes and ensure availability of necessary material, equipment, and labor resources required for the MRO/OEM team to meet customer demands, • Oversee the MRO/OEM line operations and implement action plans to comply with high-quality, cost-effective production schedules, quality standards, and ensure safety policies are met at all times, • Oversee the day-to-day training and operations of technical production employees on second shift to ensure a productive workforce, • Report on needed maintenance of production equipment and machines to ensure efficient operations, • Partner with the quality assurance team to ensure product quality and specifications are consistent, • Collaborate with Engineering, Customer Account Managers and Quality to ensure the OTD and TAT of our products, • Identify process/equipment improvements to drive continuous improvement actions, • Continuously manage and review employee performance, • Achieve production objectives for schedule, cost and quality, • Acknowledge and enforce compliance on goals and aggressive schedules for improvement, • Manage department KPI’s, operational metrics and report on results, • Proactively recognize and solve challenges affecting current and future ability to achieve production objectives, • Adhere and maintain compliance with operations budgets and business plan to attain production and shipping goals Roles and Responsibilities • Provide leadership and direction to the plant production team members in areas of safety, machine operation, sanitation, quality, customer service and maintenance, • Maintain a clear understanding of company expectations for accuracy, quality and timelessness and develop methods for meeting or exceeding those expectations, • Review production orders or schedules to ascertain product data such as types, quantities, and specifications of products and scheduled delivery dates in order to plan department operations, • Ensure that quality standards are maintained and continually improved upon, • Implement continuous improvement processes that increase productivity and reduce production costs, • Ensure the preventative maintenance program is implemented throughout the facility, including manufacturing equipment and warehouse equipment, • Maintain a clean and safe working environment in the plant with a high standard on housekeeping, • Find decision-making process that helps you make smart yet quick decisions, • Use critical thinking skills to weigh your options and predict the best possible outcomes, • Use creative strategies to solve issues and be flexible in unexpected circumstances, • Support your team during challenging situations, and encourage them to work toward their goals, • Check in periodically and make sure workers are meeting their individual goals and hitting set benchmarks, • 5 Years of progressive management/supervisor/lead experience in a manufacturing environment, • Ability to work with various manufacturing and office-based technology systems, including ERP and Microsoft programs, • Strong Leadership, • Critical Thinking, • Time Management, • Priority Management, • Problem Solving, • Workload Organization, • Staff Development, • Managing Performance, • Openness to Advice, • Willingness to Learn, • Blueprint Reading, • Using of measurement equipment, • Knowledge of AS9100 regulatory requirements, FAA Repair Station requirements, • Experience and Proficiency with Microsoft Office (Word, Excel, Outlook), • Sheet metal fabrication, machining, welding, brazing and/or assembly experience is preferred., • Minimum 3 years experience in a supervisory role, • Minimum 5 year experience in manufacturing, • High school diploma/GED is required, • Must be goal oriented, organized and have strong organizational skills, • Must be a “hands on” leader. This is not an “office” position., • Must provide and receive open communication, • Able to employ conflict management skills and resolve disagreements between employees, • Collaborate with other members of the team, • Create a positive work environment Physical Demands • Stand or Sit: Must be able to remain in a stationary position 50% of the time, • Walk: Ability to move about inside the building to access assets, manufacturing shop floor, office machinery, etc., • Use Hands/Fingers to Handle or Feel: Constantly operates office and manufacturing machinery, • Climb (Stairs/Ladders) or Balance: Ascends/descends ladders to access inventory and other assets in warehouse., • Stoop, Kneel, Crouch, or Crawl: Routinely need to perform these functions as required, • Talk/Hear: Frequently communicates with coworkers, customers, and vendors who have inquiries about work orders, inventory levels, asset orders, and deliveries. Must be able to exchange accurate information in these situations, • See: Must be able to perceive, identify, and inspect documents and inventory assets. Must be able to drive, • Carry Weight/Lift: Frequently moves inventory and completed assets weighing up to 50 pounds Environment: • Climate controlled manufacturing environment, • While performing the duties of this job, you are occasionally exposed to moving mechanical parts, oil, fumes or airborne particles, toxic or caustic chemicals (Appropriate PPE is provided) TAT Technologies Group is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities – TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description 1. Read and interpret blueprints, drawings, specifications, planning documents, sketches, engineering orders, electronic work instructions, charts, and graphs to determine the methods and sequences of operations required to support processing and painting operations., 2. Set up and operate chern-mill processing equipment to remove specified amounts of metal from sheet metal parts, and assemblies, extrusions and forgings utilizing etching solution, includes developmental. Experimental, first run and parts with non - symmetrical surfaces, radial tapers, deep draws, or complex contours., 3. Set up and operate, adjust, and regulate various types and sizes of ovens and furnaces and quenching tanks to heat treat metal parts made from aluminum, titanium, stainless steel, and other similar metals. Load on racks to minimize warpage and obtain even heat. As necessary operate hand and power moving and lifting equipment to place parts in ovens furnaces, and baths and quench., 4. Set up operate processing equipment to anodize and electro plate or clean metal parts and assemblies. Determine sequences of dips and rinses, position parts and electrodes, calculate and adjust immersion times, temperatures, and voltage amperage levels. Check and maintain processing solutions and chemicals in tanks as required., 5. Set up and operate various types of paint spraying equipment or dip, roll and brush interior, exterior prime, protective or finish coats on aircraft, automobiles, trucks, trailers, parts and assemblies., 6. Thin and mix paints and other surfacing materials., 7. Set up and operate robotic spray coating equipment by selecting and loading program tapes, masking material surfaces, mixing blend coating material and controlling spray flow rates, pressures, plume geometry and robot travel speed and pattern., 8. Apply finish coats where, difficult access and special care must be taken to avoid runs and inconsistencies of coat thickness, a baked smooth or wrinkle finish is required, assemblies require hand brushwork., 9. Operate robotic spray coating equipment to apply radar absorptive materials to surfaces., 10. Perform rework and touch-up when tests disclose rework necessary., 11. Record manufacturing data and statistics manually or with the aid of a computer or computer-based system. Qualifications • Candidate must have minimum 5 years of aircraft painter experience, • Must be able to work any shift assigned, • Must be able to stand for entire 8 hr. shift, • Must be able work OT/Weekends as per business needs, • Manager will schedule a demo upon start to make sure contractor can paint Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge! #ZR

Job Description Electronic Assembler - Aerospace Bench Technician Trinity Employment Professionals - Tulsa, OK Monday - Friday | 7:00am - 3:30pm Pay: $17-19/HR The Bench Technician performs component level troubleshooting and repair of complex aviation electronic and electromechanical components. Essential Duties and Responsibilities include: • Read and understand drawings, prints and schematics., • Test, disassemble, inspect, repair and reassemble aircraft components., • Read and accurately interpret maintenance manuals, service bulletins, wiring, diagrams, schematics diagrams and drawings., • Other duties as assigned. Requirements Education: • High School Diploma or GED Work Experience: • 2 years of experience in the electronic/electromechanical field preferred or graduate of Aviation Technology program., • Technical experience, including reading/interpreting technical data, • Proficient in soldering and board repair and assembly/disassembly of mechanical components, • Familiar with and able to use industry standard test equipment, such as multimeters, oscilloscopes, frequency generators, counters and have the ability to learn the proper applications of specialized test equipment Specialized Knowledge or Abilities: • Language: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to communicate orally and in writing., • Mathematical Skills: Basic math skills, • Reasoning Abilities: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Physical Demands: While performing the duties of this job, the Team Member is regularly required to stand; walk; bend, squat, use hands to finger, handle or feel, reach with hands and arms and talk or hear.. The team member may occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The noise level in the work environment is usually moderate DOT-FAA Safety Sensitive Position #MED TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram,X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, forinterview tips and many job opportunities! High School Diploma 2 years experience required • Install, adjust, or maintain mobile electronics communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other mobile equipment., • Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software., • Reassemble and test equipment after repairs.

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description You’ll be working on aircraft programs like: • 787, • 737, • 777 Core Responsibilities 1. Follow Instructions • Read and interpret blueprints, drawings, and work instructions, • Use written, verbal, and electronic information to complete tasks 2. Measure and Test • Use shop math and precision tools (calipers, gauges, test equipment), • Assemble components into sub-assemblies or final assemblies, • Ensure all work meets engineering and process requirements, • Operate tools and equipment required for assembly, • Perform minor machine maintenance, such as:, • Replacing filters, • Maintaining fluid levels, • Changing bulbs 7. Material Handling • Move parts within the work area using assigned equipment, • Complete required transactions to move products to the next operation 8. Productivity • Complete work within assigned schedules and timelines, • Team Support and Training, • Assist in training other employees on assembly and inspection techniques, • Support team members across different skill levels, • Cross-train in inspection and work toward SIA qualification: 9. Machine Operation • Set up and operate:, • CNC machines (basic level), • Fastening equipment, • May include experience in one or more of the following:, • Structural assembly and installation, • Sealing, including fuel cell sealing, • Sub-assembly work, • Door installation, • Precision bench assembly, • Pressure and vacuum testingQualifications, • Training will occur on 1st shift, but then need to be available for any shift as many will go to 2nd shift after certification., • They will be working overtime., • This is rework and you must have Fillet Seal and Electrical Bond Experience., • +5 years of experience as aircraft structures technician Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge! #Jsfirm

Job DescriptionWhy You’ll Love This Ramp Agent JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Ramp Agent position with Atlantic Aviation at TUL in Tulsa, OK may be perfect for you! Pay: $16 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Ramp Agent job today!ResponsibilitiesRamp Agent Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsRamp Agent Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #rampagent #Tulsa

Job Description Pay is based on experience working on aircraft. Job Summary: The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems. Essential Duties and Responsibilities: • Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration., • Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items., • Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts., • Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces., • Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions., • Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools., • Drills holes of varying sizes in detail parts and subassemblies according to work instructions., • Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions., • Inspects completed assemblies for conformance to specifications., • Two (2) or more years of major aircraft structural assembly., • Must provide own tools

Overview This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing Company, supporting Spirit's Commercial Business Units ("Spirit Commercial"). Spirit Commercial designs and builds commercial aerostructures, including for Boeing Commercial Airplanes, one of Boeing's three business units and the premier manufacturer of commercial jetliners for decades. Spirit Commercial's core products include fuselages, pylons, nacelles and wing components, with a focus on innovative composite and aluminium manufacturing solutions. Responsibilities Location: Tulsa, OK Position Responsibilities: * Set up, fabricate, and verify parts by operating conventional and computerized numerical controlled (CNC) machines and mediums or secondary hand and power tool operations such as hand or power feed drill presses, numerical milling, profiling machines, horizontal and/or jig boring mills, various types of milling machines, engine lathes and determine and select cutting tools and fixtures for Machining aircraft parts. • Plan sequences of operations and method of setup including method of holding and aligning work. Determine tooling, speeds, feeds, and depth of drilling: determine dimensions, tolerances, operations to be performed, operational sequences and methods., • Setup and operate four or more axis numerical controlled milling in manual and automatic modes to proof new or revised numerical control tapes., • Setup and operate lathes to machine tooling and experimental parts to exacting tolerances and coordinated dimensions., • Setup and operate boring mills to perform straight and single angle boring, line boring, counter boring, drilling, reaming, tapping, face and radii milling and profiling., • Setup and operate milling machines to perform work to close tolerances with the aid of all special holding fixtures and attachments. Use rotary tables, dividing or indexing heads, slotting attachments and subheads to perform operations such as milling compound/ multiple/single angles. Radii, slab, and end milling, straddle and gang milling, splines, serrations, keyways, gears, and sprockets. Basic Qualifications (Required Skills/Experience): • Must be willing and able to work any shift This is a union-represented position. Drug Free Workplace: We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: We strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $23.12/hour, with potential to earn up to $31.49/hour in accordance with the terms of the relevant collective bargaining agreement.

Job DescriptionDescription: AAA United States, Inc. has partnered with a company in Tulsa, Oklahoma that is one of the world's largest manufacturers of aerostructures for commercial airplanes, defense platforms, and business/regional jets. With expertise in aluminum and advanced composite manufacturing solutions, the company’s core products include fuselages, integrated wings and wing components, pylons, and nacelles. The Aircraft Painter is responsible for preparing and painting aircraft surfaces, components, and parts according to manufacturer specifications, and customer requirements. Essential Job Functions: • Move and/or obtain correct parts, materials, and tools, as necessary within the employee's assigned area as directed by management., • Use of all precision measuring instruments required to accomplish work assignments., • Capable of accessing and navigating electronic systems as required by the position program, and/or company., • Company will provide training as required in a timely manner., • Works safely and maintains a safe work environment adhering to established company safety requirements., • Train, coach and/or assist fellow employees as requested or required by the company., • Maintain and utilize required personal certifications and qualifications as directed by the company to perform job assignments., • Ensure equipment and tool certification occurs per procedure., • Report job handicaps such as: errors in parts, procedures, tools, sequences, etc., • Read and interpret blueprints, drawings, specifications, planning documents, sketches, engineering orders, electronic work instructions, charts, and graphs to determine the methods and sequences of operations required to support processing and painting operations., • Set up and operate chern-mill processing equipment to remove specified amounts of metal from sheet metal parts, and assemblies, extrusions and forgings utilizing etching solution, includes developmental. Experimental, first run and parts with non - symmetrical surfaces, radial tapers, deep draws, or complex contours., • Set up and operate, adjust, and regulate various types and sizes of ovens and furnaces and quenching tanks to heat treat metal parts made from aluminum, titanium, stainless steel, and other similar metals. Load on racks to minimize warpage and obtain even heat. As necessary operate hand and power moving and lifting equipment to place parts in ovens furnaces, and baths and quench., • Set up operate processing equipment to anodize and electro plate or clean metal parts and assemblies. Determine sequences of dips and rinses, position parts and electrodes, calculate and adjust immersion times, temperatures, and voltage amperage levels. Check and maintain processing solutions and chemicals in tanks as required., • Set up and operate various types of paint spraying equipment or dip, roll and brush interior, exterior prime, protective or finish coats on aircraft, automobiles, trucks, trailers, parts and assemblies., • Thin and mix paints and other surfacing materials., • Set up and operate robotic spray coating equipment by selecting and loading program tapes, masking material surfaces, mixing blend coating material and controlling spray flow rates, pressures, plume geometry and robot travel speed and pattern., • Apply finish coats where, difficult access and special care must be taken to avoid runs and inconsistencies of coat thickness, a baked smooth or wrinkle finish is required, assemblies require hand brushwork., • Operate robotic spray coating equipment to apply radar absorptive materials to surfaces., • Perform rework and touch-up when tests disclose rework necessary., • Record manufacturing data and statistics manually or with the aid of a computer or computer-based system.Requirements:, • High school diploma or GED required, • 5+ Aircraft Painter experience

Job Description Okie Staffing has a position open for a Paint Prep Technician for a reputable aviation manufacturing company. This is a long-term temporary position with the potential to convert to full-time for the right candidate. This role focuses on preparing aircraft components for the paint process. If you have strong attention to detail and a solid work history, this is a great entry point into the aerospace industry. Location: Jenks, OK Schedule: Monday – Friday 6:00 AM – 2:30 PM OR 7:00 AM – 3:30 PM Pay: $16.00 – $18.00/hour (DOE) Overtime: As required What You’ll Be Doing • Tape and mask parts prior to painting, • Prepare surfaces for paint (cleaning, sanding, prepping), • Handle small aircraft components with care and precision, • Follow safety procedures including proper use of PPE (respirator when required), • Support production team to ensure parts are ready for finishing What We’re Looking For • High School Diploma or GED (required for future conversion), • Good, stable work history (required), • Ability to work with hands and follow detailed instructions, • Comfortable working in a production/manufacturing environment, • Light experience with hand tools preferred (not required), • Must be able to pass a DOT Drug Screen (UA), • Ability to wear a respirator when needed, • Entry into the aviation/aerospace industry, • Temp-to-hire potential based on performance, • Consistent daytime schedule, • Opportunity to learn valuable production skills

Overview This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing Company, supporting Spirit's Commercial Business Units ("Spirit Commercial"). Spirit Commercial designs and builds commercial aerostructures, including for Boeing Commercial Airplanes, one of Boeing's three business units and the premier manufacturer of commercial jetliners for decades. Spirit Commercial's core products include fuselages, pylons, nacelles and wing components, with a focus on innovative composite and aluminum manufacturing solutions. Responsibilities Location: Tulsa, OK Position Responsibilities: • Move and/or obtain correct parts, materials, and tools, as necessary within the employee's assigned area as directed by management., • Use of all precision measuring instruments required to accomplish work assignments., • Capable of accessing and navigating electronic systems as required by the position program, and/or company. Company will provide training as required in a timely manner., • Works safely and maintains a safe work environment adhering to established company safety requirements., • Train, coach and/or assist fellow employees as requested or required by the company., • Maintain and utilize required personal certifications and qualifications as directed by the company to perform job assignments., • Ensure equipment and tool certification occurs per procedure., • Report job handicaps such as: errors in parts, procedures, tools,sequences, etc. Representative Duties 670D Tulsa Only • Read and interpret blueprints, drawings, specifications, planning documents, sketches, engineering orders, electronic work instructions, charts, and graphs to determine the methods and sequences of operations required to support processing and painting operations., • Set up and operate chern-mill processing equipment to remove specified amounts of metal from sheet metal parts, and assemblies, extrusions and forgings utilizing etching solution, includes developmental, experimental, first run and parts with non - symmetrical surfaces, radial tapers, deep draws, or complex contours., • Set up and operate, adjust, and regulate various types and sizes of ovens and furnaces and quenching tanks to heat treat metal parts made from aluminum, titanium, stainless steel, and other similar metals. Load on racks to minimize warpage and obtain even heat. As necessary operate hand and power moving and lifting equipment to place parts in ovens furnaces, and baths and quench., • Set up operate processing equipment to anodize and electro plate or clean metal parts and assemblies. Determine sequences of dips and rinses, position parts and electrodes, calculate and adjust immersion times, temperatures, and voltage amperage levels. Check and maintain processing solutions and chemicals in tanks as required., • Set up and operate various types of paint spraying equipment or dip, roll and brush interior, exterior prime, protective or finish coats on aircraft, automobiles, trucks, trailers, parts and assemblies., • Thin and mix paints and other surfacing materials., • Set up and operate robotic spray coating equipment by selecting and loading program tapes, masking material surfaces, mixing blend coating material and controlling spray flow rates, pressures, plume geometry and robot travel speed and pattern., • Apply finish coats where, difficult access and special care must betaken to avoid runs and inconsistencies of coat thickness, a baked smooth or wrinkle finish is required, assemblies require hand brushwork., • Operate robotic spray coating equipment to apply radar absorptive materials to surfaces., • Perform rework and touch-up when tests disclose rework necessary. Basic Qualifications (Required Skills/Experience): • Must be willing and able to work any shift. This is a union-represented position. Drug Free Workplace: We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: We strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $18.00/hour, with potential to earn up to $24.41/hour in accordance with the terms of the relevant collective bargaining agreement.

What is a Chaplain? There are those who are born to lead, and those who are born to lead in faith. As a Navy Chaplain, you will be the voice of encouragement, reason and hope to thousands of Sailors and Marines. From morning prayers to Sunday mass services to baptisms at sea, you will support and uplift the brave men and women who have chosen to serve their country. The Navy Chaplain Corps boasts more than 800 Navy Chaplains from more than 100 different faith groups, including Christian, Jewish, Muslim, Buddhist and many others. Chaplains hold important leadership roles as well, each serving as a Navy Officer. Chaplains offer everything from faith and personal advice, to much-needed solace - all while living up to the guiding principles of the Chaplain Mission: • Providing religious ministry and support to those of your own faith, • Facilitating the religious requirements of those from all faiths, • Caring for all servicemembers and their families, including those subscribing to no specific faith Want to start your journey with the Navy? Apply Now Officer None What to Expect Navy Chaplain Navy Chaplain - Ministry of Presence - The Full Experience About Chaplain Jobs in the Navy Responsibilities As a Navy Chaplain, your job spans a broad range of duties. You will support fellow servicemembers during their most joyful moments and during their most difficult. Your responsibilities might be to: • Conduct worship services in a variety of settings, • Perform religious rites and ceremonies such as weddings, funeral services and baptisms, • Counsel individuals who seek guidance, • Oversee religious education programs, such as Sunday school and youth groups, • Visit and provide spiritual guidance and care to hospitalized personnel and/or their family members, • Train lay leaders who conduct religious education programs, • Promote attendance at religious services, retreats and conferences, • Advise leaders at all levels regarding morale, ethics and spiritual well-being Work Environment Navy Chaplains immerse themselves in the daily lives of servicemembers. In what can be best described as a ministry of presence, they are there to offer guidance and insight, whenever they're needed. You could provide support on land or at sea, when presiding over religious ceremonies on a base or conducting services from the flight deck of an aircraft carrier. Training & Advancement Those pursuing a Chaplain position are required to attend Officer Development School (ODS) in Newport, RI. Upon completion, they attend a seven-week course at the Naval Chaplaincy School and Center, also in Newport, RI. Promotion opportunities are regularly available but competitive and based on performance. Post-Service Opportunities Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields such as family counseling and behavioral therapy in the civilian world. Education Opportunities Navy Chaplains typically continue their education throughout their careers. Opportunities for continuing education are available through the Advanced Education Program while being paid full-time as a Navy Officer. Beyond professional credentials and certifications, Navy Chaplains can advance their education by: • Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) Qualifications & Requirements A candidate seeking to serve as a Navy Chaplain and Officer must: • Have a bachelor's degree from a qualified four-year undergraduate educational institution, • Have a graduate degree in theological or related studies from an accredited educational institution. (Note that a qualifying degree program requires no fewer than 72 semester hours or 108 quarter hours of graduate-level work. Related studies may include graduate courses in pastoral counseling, social work, religious administration and similar disciplines when one-half of the earned credits include topics in general religion, world religions, the practice of religion, theology, religious philosophy, religious ethics and/or the foundational writings from the applicant's religious tradition.), • Have two years of full-time religious leadership experience that's compatible with the duties of a Religious Ministry Professional (RMP) in their respective Religious Organizations (RO) and relevant to the settings of military chaplaincy To learn more and see if you qualify to serve as a Navy Chaplain, call the Chaplain Corps at 888-NAVYCHC. Part-Time Opportunities Serving part-time as a Navy Reserve Chaplain, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Chaplains in the Navy Reserve typically work at a location close to their homes. This gives you the flexibility to minister in the Navy while maintaining responsibilities to your congregation at home. For Annual Training, Chaplains may serve anywhere in the world, alongside the Sailors, Marines and Coast Guardsmen to whom they minister. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that. Chaplains in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must be met. For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again. For current or former Officers of military branches other than the Navy (OSVET), as well as for Officer candidates without prior military experience: Officer Candidates will be required to attend the Officer Development School (ODS) in Newport, RI. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy. For educational and institutional qualifications and requirements, please reference the Qualifications & Requirements section above. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Compare Navy Careers See how a career as a Navy Chaplain compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Circuit Board Assembler - 2nd Shift Job Description We are growing and looking for motivated individuals to learn our business and grow with us! Openings on 2nd shift: • Monday - Thursday (4pm to 2:30am)\n The Assembler role is perfect for individuals who enjoy hands on work. We have tasks for all skill levels, ranging from hand placing components on circuit boards to assembling complex electrical devices. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, providing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Tulsa, OK manufactures state-of- art circuit boards for Aerospace and Defense. Why Ducommun? \n • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces\n, • Clean and climate controlled working environment\n, • Opportunity for career growth\n Perform assembly operations of printed circuit boards according to established operating procedures by performing the following duties: \n • Reading and interpreting technical documentation to understand where components should be placed and how they should be connected\n, • Selecting and mounting electronic components like transistors, resistors, and capacitors\n, • Maintain a clean and organized work environment and equipment\n, • Recommend changes in documentation to ensure high quality results\n, • Adhere to General Requirements of Team Members\n, • Perform other assignments as required\n, • Work under close supervision\n, • May receive direction from group leader\n, • Responsible for the proper handling and management of hazardous waste generated in their work area.\n\n Skills & Qualifications Required Skills & Qualifications: \n • Attention to detail: crucial for component placement and quality assembling\n, • Manual dexterity: necessary for handling small components and using hand tools effectively\n, • Team work: good communication and interpersonal skills to work effectively with a team\n, • Adherence to safety protocols like ESD and PPE\n, • Ability to perform simple task utilizing work instructions\n, • Ability to read and follow assembly instructions\n Physical Abilities Lift /Carry Stand - Continuously 10 lbs. or less - Continuously Walk - Continuously 11-20 lbs. - Occasionally Sit - Continuously 21-50 lbs. Occasionally Climb - N/A 51-100 lbs. - N/A Crawl - N/A Over 100 lbs. - N/A Squat or Kneel - Occasionally Bend - Occasionally Push / Pull Fine Manipulation - Continuously 10 lbs. or less - Continuously Reach Outward - Occasionally 10-20 lbs. - Occasionally Reach Above Shoulder - Occasionally 20-50 lbs. - Occasionally Drive - N/A 50-100 lbs. - N/A Over 100 lbs. - N/A N/A (Not Applicable) - Activity is not applicable to this occupation. Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs./day). Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs./day). Constantly - Occupation requires this activity more than 66% of the time (5.5+ hrs./day). Required Experience/Education/Training/Certifications: \n • High school diploma or GED required\n, • Must be capable of satisfactorily completing the training and certifications identified in training matrix.\n, • Required to wear ESD and PPE as needed\n, • Moderate noise levels\n, • Exposure to light manufacturing environment, including occasional exposure to unpleasant odors\n\n Equal Opportunity Employer Veterans/Disabled 11616 East 51st Street Tulsa, Oklahoma, 74146 United States

Circuit Board Assembler - 2nd Shift Job Description We are growing and looking for motivated individuals to learn our business and grow with us! Openings on 2nd shift: • Monday - Thursday (4pm to 2:30am)\n The Assembler role is perfect for individuals who enjoy hands on work. We have tasks for all skill levels, ranging from hand placing components on circuit boards to assembling complex electrical devices. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, providing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Tulsa, OK manufactures state-of- art circuit boards for Aerospace and Defense. Why Ducommun? \n • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces\n, • Clean and climate controlled working environment\n, • Opportunity for career growth\n Perform assembly operations of printed circuit boards according to established operating procedures by performing the following duties: \n • Reading and interpreting technical documentation to understand where components should be placed and how they should be connected\n, • Selecting and mounting electronic components like transistors, resistors, and capacitors\n, • Maintain a clean and organized work environment and equipment\n, • Recommend changes in documentation to ensure high quality results\n, • Adhere to General Requirements of Team Members\n, • Perform other assignments as required\n, • Work under close supervision\n, • May receive direction from group leader\n, • Responsible for the proper handling and management of hazardous waste generated in their work area.\n\n Skills & Qualifications Required Skills & Qualifications: \n • Attention to detail: crucial for component placement and quality assembling\n, • Manual dexterity: necessary for handling small components and using hand tools effectively\n, • Team work: good communication and interpersonal skills to work effectively with a team\n, • Adherence to safety protocols like ESD and PPE\n, • Ability to perform simple task utilizing work instructions\n, • Ability to read and follow assembly instructions\n Physical Abilities Lift /Carry Stand - Continuously 10 lbs. or less - Continuously Walk - Continuously 11-20 lbs. - Occasionally Sit - Continuously 21-50 lbs. Occasionally Climb - N/A 51-100 lbs. - N/A Crawl - N/A Over 100 lbs. - N/A Squat or Kneel - Occasionally Bend - Occasionally Push / Pull Fine Manipulation - Continuously 10 lbs. or less - Continuously Reach Outward - Occasionally 10-20 lbs. - Occasionally Reach Above Shoulder - Occasionally 20-50 lbs. - Occasionally Drive - N/A 50-100 lbs. - N/A Over 100 lbs. - N/A N/A (Not Applicable) - Activity is not applicable to this occupation. Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs./day). Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs./day). Constantly - Occupation requires this activity more than 66% of the time (5.5+ hrs./day). Required Experience/Education/Training/Certifications: \n • High school diploma or GED required\n, • Must be capable of satisfactorily completing the training and certifications identified in training matrix.\n, • Required to wear ESD and PPE as needed\n, • Moderate noise levels\n, • Exposure to light manufacturing environment, including occasional exposure to unpleasant odors\n\n Equal Opportunity Employer Veterans/Disabled 11616 East 51st Street Tulsa, Oklahoma, 74146 United States

Circuit Board Assembler - 1st Shift Job Description We are growing and looking for motivated individuals to learn our business and grow with us! Openings on 1st shift: • Monday - Thursday (5am to 3:30pm)\n The Assembler role is perfect for individuals who enjoy hands on work. We have tasks for all skill levels, ranging from hand placing components on circuit boards to assembling complex electrical devices. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, providing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Tulsa, OK manufactures state-of- art circuit boards for Aerospace and Defense. Why Ducommun? \n • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces\n, • Clean and climate controlled working environment\n, • Opportunity for career growth\n Perform assembly operations of printed circuit boards according to established operating procedures by performing the following duties: \n • Reading and interpreting technical documentation to understand where components should be placed and how they should be connected\n, • Selecting and mounting electronic components like transistors, resistors, and capacitors\n, • Maintain a clean and organized work environment and equipment\n, • Recommend changes in documentation to ensure high quality results\n, • Adhere to General Requirements of Team Members\n, • Perform other assignments as required\n, • Work under close supervision\n, • May receive direction from group leader\n, • Responsible for the proper handling and management of hazardous waste generated in their work area.\n\n Skills & Qualifications Required Skills & Qualifications: \n • Attention to detail: crucial for component placement and quality assembling\n, • Manual dexterity: necessary for handling small components and using hand tools effectively\n, • Team work: good communication and interpersonal skills to work effectively with a team\n, • Adherence to safety protocols like ESD and PPE\n, • Ability to perform simple task utilizing work instructions\n, • Ability to read and follow assembly instructions\n Physical Abilities Lift /Carry Stand - Continuously 10 lbs. or less - Continuously Walk - Continuously 11-20 lbs. - Occasionally Sit - Continuously 21-50 lbs. Occasionally Climb - N/A 51-100 lbs. - N/A Crawl - N/A Over 100 lbs. - N/A Squat or Kneel - Occasionally Bend - Occasionally Push / Pull Fine Manipulation - Continuously 10 lbs. or less - Continuously Reach Outward - Occasionally 10-20 lbs. - Occasionally Reach Above Shoulder - Occasionally 20-50 lbs. - Occasionally Drive - N/A 50-100 lbs. - N/A Over 100 lbs. - N/A N/A (Not Applicable) - Activity is not applicable to this occupation. Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs./day). Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs./day). Constantly - Occupation requires this activity more than 66% of the time (5.5+ hrs./day). Required Experience/Education/Training/Certifications: \n • High school diploma or GED required\n, • Must be capable of satisfactorily completing the training and certifications identified in training matrix.\n, • Required to wear ESD and PPE as needed\n, • Moderate noise levels\n, • Exposure to light manufacturing environment, including occasional exposure to unpleasant odors\n\n Equal Opportunity Employer Veterans/Disabled 11616 East 51st Street Tulsa, Oklahoma, 74146 United States

Circuit Board Assembler - Weekend Shift Job Description We are growing and looking for motivated individuals to learn our business and grow with us! Openings on Weekend shift: • Friday - Sunday (6:30am to 7:00pm)\n The Assembler role is perfect for individuals who enjoy hands on work. We have tasks for all skill levels, ranging from hand placing components on circuit boards to assembling complex electrical devices. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, providing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Tulsa, OK manufactures state-of- art circuit boards for Aerospace and Defense. Why Ducommun? \n • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces\n, • Clean and climate controlled working environment\n, • Opportunity for career growth\n Perform assembly operations of printed circuit boards according to established operating procedures by performing the following duties: \n • Reading and interpreting technical documentation to understand where components should be placed and how they should be connected\n, • Selecting and mounting electronic components like transistors, resistors, and capacitors\n, • Maintain a clean and organized work environment and equipment\n, • Recommend changes in documentation to ensure high quality results\n, • Adhere to General Requirements of Team Members\n, • Perform other assignments as required\n, • Work under close supervision\n, • May receive direction from group leader\n, • Responsible for the proper handling and management of hazardous waste generated in their work area.\n\n Skills & Qualifications Required Skills & Qualifications: \n • Attention to detail: crucial for component placement and quality assembling\n, • Manual dexterity: necessary for handling small components and using hand tools effectively\n, • Team work: good communication and interpersonal skills to work effectively with a team\n, • Adherence to safety protocols like ESD and PPE\n, • Ability to perform simple task utilizing work instructions\n, • Ability to read and follow assembly instructions\n Physical Abilities Lift /Carry Stand - Continuously 10 lbs. or less - Continuously Walk - Continuously 11-20 lbs. - Occasionally Sit - Continuously 21-50 lbs. Occasionally Climb - N/A 51-100 lbs. - N/A Crawl - N/A Over 100 lbs. - N/A Squat or Kneel - Occasionally Bend - Occasionally Push / Pull Fine Manipulation - Continuously 10 lbs. or less - Continuously Reach Outward - Occasionally 10-20 lbs. - Occasionally Reach Above Shoulder - Occasionally 20-50 lbs. - Occasionally Drive - N/A 50-100 lbs. - N/A Over 100 lbs. - N/A N/A (Not Applicable) - Activity is not applicable to this occupation. Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs./day). Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs./day). Constantly - Occupation requires this activity more than 66% of the time (5.5+ hrs./day). Required Experience/Education/Training/Certifications: \n • High school diploma or GED required\n, • Must be capable of satisfactorily completing the training and certifications identified in training matrix.\n, • Required to wear ESD and PPE as needed\n, • Moderate noise levels\n, • Exposure to light manufacturing environment, including occasional exposure to unpleasant odors\n\n Equal Opportunity Employer Veterans/Disabled 11616 East 51st Street Tulsa, Oklahoma, 74146 United States

Circuit Board Assembler - 1st Shift Job Description We are growing and looking for motivated individuals to learn our business and grow with us! Openings on 1st shift: • Monday - Thursday (5am to 3:30pm)\n The Assembler role is perfect for individuals who enjoy hands on work. We have tasks for all skill levels, ranging from hand placing components on circuit boards to assembling complex electrical devices. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, providing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications. Our Facility in Tulsa, OK manufactures state-of- art circuit boards for Aerospace and Defense. Why Ducommun? \n • Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces\n, • Clean and climate controlled working environment\n, • Opportunity for career growth\n Perform assembly operations of printed circuit boards according to established operating procedures by performing the following duties: \n • Reading and interpreting technical documentation to understand where components should be placed and how they should be connected\n, • Selecting and mounting electronic components like transistors, resistors, and capacitors\n, • Maintain a clean and organized work environment and equipment\n, • Recommend changes in documentation to ensure high quality results\n, • Adhere to General Requirements of Team Members\n, • Perform other assignments as required\n, • Work under close supervision\n, • May receive direction from group leader\n, • Responsible for the proper handling and management of hazardous waste generated in their work area.\n\n Skills & Qualifications Required Skills & Qualifications: \n • Attention to detail: crucial for component placement and quality assembling\n, • Manual dexterity: necessary for handling small components and using hand tools effectively\n, • Team work: good communication and interpersonal skills to work effectively with a team\n, • Adherence to safety protocols like ESD and PPE\n, • Ability to perform simple task utilizing work instructions\n, • Ability to read and follow assembly instructions\n Physical Abilities Lift /Carry Stand - Continuously 10 lbs. or less - Continuously Walk - Continuously 11-20 lbs. - Occasionally Sit - Continuously 21-50 lbs. Occasionally Climb - N/A 51-100 lbs. - N/A Crawl - N/A Over 100 lbs. - N/A Squat or Kneel - Occasionally Bend - Occasionally Push / Pull Fine Manipulation - Continuously 10 lbs. or less - Continuously Reach Outward - Occasionally 10-20 lbs. - Occasionally Reach Above Shoulder - Occasionally 20-50 lbs. - Occasionally Drive - N/A 50-100 lbs. - N/A Over 100 lbs. - N/A N/A (Not Applicable) - Activity is not applicable to this occupation. Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs./day). Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs./day). Constantly - Occupation requires this activity more than 66% of the time (5.5+ hrs./day). Required Experience/Education/Training/Certifications: \n • High school diploma or GED required\n, • Must be capable of satisfactorily completing the training and certifications identified in training matrix.\n, • Required to wear ESD and PPE as needed\n, • Moderate noise levels\n, • Exposure to light manufacturing environment, including occasional exposure to unpleasant odors\n\n Equal Opportunity Employer Veterans/Disabled 11616 East 51st Street Tulsa, Oklahoma, 74146 United States

SO OTHERS MAY LIVE When disaster strikes, Aviation Rescue Swimmers don't hesitate-they jump. Into raging seas, hurricane winds, and combat zones, they go where others won't- to bring people back alive. As part of the world's most elite Special Operations force, Navy AIRRs execute life-or-death rescues in the most extreme conditions. Whether pulling survivors from sinking ships, saving downed pilots, or braving towering waves, they live by one mission: so others may live. That motto isn't just a phrase-it's a promise. And they prove it every time they leap into the unknown. Enlisted None WATCH VIDEOS ABOUT AIRR Aviation Rescue Swimmer Naval Aircrewman Helicopter - Sierra Naval Aircrewman Helicopter - Romeo Naval Aircrewman: MH-60 Romeo & MH-60 Sierra AVIATION RESCUE SWIMMER: CAREER DETAILS & REQUIREMENTS Responsibilities Aviation Rescue Swimmers are tasked with entering treacherous conditions to assist with rescue missions, humanitarian assistance, and operational support. One day you may be evacuating families on the other side of the globe amidst a catastrophic storm, and the next day rescuing the crew of a ship off the Pacific coast or saving a mountain climber hanging from an inaccessible cliff. Depending on your role, duties may include: • Coordinating with pilots as an Aircrewman aboard helicopters, • Saving the crew of downed aircraft, people aboard stranded or capsized vessels at sea, or hikers and mountain climbers in danger, • Rescuing civilians during natural disasters in collaboration with other forces such as the Coast Guard, • Delivering aid and supplies to other countries in humanitarian operations, • Providing support to Naval Special Warfare Operations, • Conducting surveillance in anti-submarine warfare and drug interdiction operations, • Operate radar, Forward Looking Infrared sensors, missile systems and door guns in anti-surface operations Naval Aircrewman Helicopter (AWS) AWS's operate various aircraft systems to support a range of mission types including: • Surface Warfare, • Search and Rescue, • Combat Search and Rescue, • Naval Special Warfare, • Airborne Mine Countermeasure AWR's operate various aircraft systems to support a range of mission types including: • Anti-Submarine, • Recon & Intelligence, • Anti-Surface Ship, • Search and Rescue, • Combat Search and Rescue, • Naval Special Warfare Fire Support Work Environment As an AIRR, you will operate in almost every type of extreme environment and may be assigned to Helicopter Sea Combat (HSC) or Helicopter Maritime Strike Squadrons (HSM) sea or shore duty in any part of the world. You could be assigned to squadrons at Naval Air Stations and may deploy aboard aircraft carriers, surface combat ships and support ships. Training & Advancement Aviation Rescue Swimmers must be prepared to operate in any challenging environment. It's why two years of training in advanced swimming and lifesaving techniques, helicopter mission equipment and helicopter weapons systems are required before you report to your first squadron. Throughout training, candidates are continually tested mentally and physically as they advance to more rigorous and challenging scenarios. Upon completion of initial training at Recruit Training Command Great Lakes (known as Boot Camp), those pursuing an Aircrewman role undergo the following training pipeline: Aviation Rescue Swimmer School Prep Course (2 weeks) in Pensacola, FL. Aircrew Candidate School (4 weeks) in Pensacola, FL, to learn Naval Aviation fundamentals, intermediate water survival, aviation physiology and advanced water survival. Rescue Swimmer School (6 weeks) in Pensacola, FL, to learn search and rescue techniques. Class "A" Technical School (8-14 weeks) in Pensacola, FL, learning one of the Aircrew Ratings (AWF, AWO, AWS, AWR, AWV). SERE School (2 weeks) in North Island, CA, or Portsmouth, NH, to train in Survival, Evasion, Resistance and Escape (SERE) techniques. Fleet Replacement Squadrons (28-52 weeks) location dependent on aircrew rating in one of five locations (Jacksonville, FL, Norfolk, VA, San Diego, CA, Oklahoma City, OK, Ft Worth, TX) for basic flight and aircraft weapons systems training. After graduation, an AIRR may be assigned to a helicopter command at sea or on shore duty in various locations throughout the world, Japan, Guam, Spain, or the continental US including San Diego, CA, Norfolk, VA, Jacksonville, FL, Fallon, NV, Whidbey Island, WA, Key West, FL and many others. Advanced Education & Training Based on performance and the needs of the Navy, you could potentially be eligible to receive additional training in: • Emergency Medical Technician (EMT) training, • Helicopter Inland Rappel School (mountain & cliff rescue training), • Schoolhouse instructors, • Weapons instructors Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world whether you're an AWS or AWR. Education Opportunities Members of the Naval Special Warfare community have any number of unique opportunities to advance their knowledge. Navy training provides skills and knowledge in everything from military tactics and small arms use to survival and a number of other tactical military procedures. Beyond offering access to professional credentials and certifications, Navy training in this field can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through undergraduate degree opportunities like the Navy College Program and Tuition Assistance and the Post-9/11 GI Bill. Qualifications & Requirements No college degree is required to become an AIRR, but a high degree of difficulty comes standard with nearly everything you'll do. Training is tough and ongoing. You should be in excellent physical condition and a strong swimmer. To qualify for Rescue Swimmer Training, both men and women must: • Meet specific eyesight requirements: uncorrected vision no worse than 20/100; correctable to 20/20 in both eyes with normal depth and color perception, • Meet the minimum Armed Services Vocational Aptitude Battery (ASVAB) score: VE+AR+MK+MC=210 or VE+AR+MK+AS=210, • Pass a PST in DEP/Boot Camp, • Pass Class 1 Flight Physical, • Be 30 years of age or younger Exercise Time Min. Elevated Swim 500 yards (freestyle) Unlimited 12:00 9:00 Push-up 2:00 42 65 Sit-up 2:00 50 65 Pull-up 2:00 04 10 Run 1.5 miles Unlimited 12:00 10:15 Candidates who achieve the Elevated Physical Screening Test (EPST) scores shown above may qualify for the Enlisted Bonus for Shipping (EB-SHP) program. These elevated standards must be met during your 14-day shipping PST to be eligible for the bonus. Learn more about Navy enlistment bonuses. NOTE: You should consult your physician or other health-care professional before starting any exercise regime or other fitness program to determine if it is right for your needs. This is particularly true if you (or your family) have a history of medical illnesses or ailments that could be made worse by a change in physical activity. Do not start a fitness program if your physician or health-care provider advises against it. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are no part-time jobs as a Navy Reserve Sailor in this role. Go back to Careers to find other jobs that have a Reserve component. You can also find out more about what life is like as a Reserve Sailor in the Navy. Aviation Rescue Swimmer - PST Full HTML CAN YOU OUTPERFORM TOP AIRR CANDIDATES? Check the AIRR PST leaderboard and find a testing event near you. Learn More Compare Navy Careers See how a career as a First Responder Careers compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Job DescriptionWhy You’ll Love This Aircraft Fueler JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Aircraft Fueler position with Atlantic Aviation at TUL in Tulsa, OK may be perfect for you! Pay: $16 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Aircraft Fueler job today!ResponsibilitiesAircraft Fueler Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsAircraft Fueler Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #aircraftfueler #Tulsa

If you're a Surface Warfare Officer (SWO), you have what it takes to lead by example. Maintain and operate the most advanced fleet of ships in the world-along with the crews that support them. Your team of Sailors will look to you for guidance, so you'll need to become an expert on everything from engineering to combat systems to navigation. Communicate your mission and goals with your crew to ensure everything is smooth sailing. If you see yourself commanding a Naval ship as a Captain one day, this is the role that will get you there. Want to start your journey with the Navy? Apply Now Officer None What to Expect Surface Warfare Officer More Information Responsibilities Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces: Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers. Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support. Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations. Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships. Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines. You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers. Work Environment As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world. Training & Advancement Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI. Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore. Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification. After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship. Promotion opportunities are regularly available but competitive and based on performance. Post-Service Opportunities Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector. Education Opportunities Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by: • Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC), • Completing Joint Professional Military Education (JPME) at one of the various service colleges Qualifications & Requirements A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI. All candidates must also be U.S. Citizens. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are part-time opportunities available as a Surface Warfare Officer. Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes. For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that. Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met. For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again. Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy. Compare Navy Careers See how a career as a Navy Diver compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Meteorology and Oceanography encompass every natural law that dictates the Navy's every move. At sea or ashore, we must plan and prepare for the potential environments we will operate in. That's why we need Officers to inform us of weather patterns, prepare comprehensive maps, and watch over Aerographer's Mates who forecast the weather. Planning an air mission, charting the best course for a ship or identifying currents that affect a submarine underway-whatever the scenario, meteorology and oceanography are factors that inevitably come into play. Be part of the team that studies how our environment changes our actions. Want to start your journey with the Navy? Apply Now Officer None What to Expect Meteorology & Oceanography Officer More Information Responsibilities Whether operating in the air, at sea or underwater, Navy equipment, people and decision-making all rely on the technical and tactical advice of Navy Meteorology and Oceanography (METOC) Officers. They apply expertise in all facets of oceanography, meteorology, hydrography and precise time and astronomy as they: • Help guide ships, aircraft and troops with recommendations based on weather forecasts and ocean conditions, • Relay forecast updates and weather warnings to military and civilian authorities, • Prepare ocean, sea and waterway charts and maps for anything from basic navigation to search-and-rescue efforts, • Maintain the military's primary master clock, which provides the most precise time interval in the world and drives the Global Positioning System (GPS), • Oversee the work of Aerographer's Mates - Enlisted Sailors who monitor weather conditions and provide forecast information Work Environment Navy Meteorologists and Oceanographers may serve in a wide variety of settings around the world, from serving aboard aircraft carriers or amphibious ships, to conducting research at the Naval Observatory or Naval Research Labs. You will also have the opportunity to further your education at Naval Postgraduate School. Training & Advancement Those pursuing a Meteorology and Oceanography Officer position are required to attend Officer Candidate School (OCS) in Newport, RI. Upon completion, they typically attend a 5-week Basic Oceanography Accession Training (BOAT) in Gulfport, MS. They also receive specialized training that includes methods of analyzing weather conditions, identification of common weather patterns, and techniques and procedures of forecasting. From there, METOC Officers embark on a career path that usually progresses from an operational tour (a non-oceanography role on a ship or with a deployable unit) to a Naval Oceanography tour (within a warfighting directorate or production center) followed by an education tour (which involves receiving formal education in a preferred discipline). After that, there are opportunities to serve on aircraft carriers, with Strike Group Staff, and in roles more specialized to one's preferred discipline and with increasing leadership responsibilities. Post-Service Opportunities Promotion opportunities are regularly available but competitive and based on performance. It's also important to note that specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector. Education Opportunities Beyond professional credentials and certifications, Meteorology and Oceanography Officers can advance their education by: • Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC) Qualifications & Requirements A four-year degree is required to work as a Meteorology and Oceanography Officer. Candidates seeking an Officer position in this community must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in areas of study such as physics, physics-based oceanography, meteorology, hydrography, earth science or engineering. All candidates must also be U.S. citizens, eligible for a secret security clearance and qualified for sea duty. General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before. Part-Time Opportunities There are part-time opportunities available as a METOC Officer. Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, METOC Officers in the Navy Reserve typically work at a location close to their homes For annual training, METOC Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore. Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors. Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that. Meteorology and Oceanography Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must be met. For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again. For current or former Officers of military branches other than the Navy (OSVET), as well as for Officer candidates without prior military experience: Beginning October 1st, 2019, Officer Candidates will be required to attend the Officer Development School (ODS) in Newport, RI, instead of the 12-day Direct Commission Officer School. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Here you will learn about the military structure of the U.S. Navy, its rich history of traditions and customs, leadership development and military etiquette. There may be an option for attendees to request to split the five-week program into two sessions. Compare Navy Careers See how a career as an Industrial & Mechanical Careers compares to other Navy jobs. Compare roles, pay and requirements for each job now.

Job Description TAT Technologies is recognized as a world leader in the Aerospace Industry. As the premier choice for Heat Transfer manufacturing and MRO, TAT Technologies Tulsa Site provides high-value alternatives to Commercial, Regional, and Rotary Aircraft customers worldwide. TAT Technologies Tulsa Site is also a premier in the Defense Industry. As the preferred choice for Heat Transfer new manufacturing and MRO, TAT-Limco affords the best-value solutions for our Military customers globally. TAT-Technologies Tulsa, an FAA Approved Certificated Repair Station, is looking for a Technical Training Coordinator to effectively run the FAA required Training Program. The Training Coordinator is responsible for planning, organizing, and delivering training to team members to improve their job safety, skills, and knowledge. The Training Coordinator will be responsible for developing Initial, recurrent, and remedial training programs. This role works cross functionally across the organization to ensure compliance with FAA training requirements. Requirements Key Responsibilities: • Create and maintain company training matrix which spans departments from Quality to Safety to HR, • Promptly address urgent training requests and deliver critical programs within tight deadlines, • Identify and assess future and current training needs by utilizing an Individual Needs Assessment, • Work with supervisors and leadership to identify skill gaps and create customized training solutions, • Identify gaps and needs of the organization by performing a Repair Station Needs Assessment, • Develop and maintain individual training records in various training platforms (Paylocity LMS, 145, etc.), • Identify and implement training process improvements, • Coordinate and facilitate training sessions, • Participate in and assist in all New Employee Orientations (NEO), • Monitor and evaluate training programs effectiveness and success, • Assist with talent and workforce planning, • Create training materials to help ensure learning comprehension (handouts, slide shows, quizzes, etc.), • Maintain current list of qualified trainers, • Advises supervisors and leadership of missing training and works to resolve the issue with urgency, • Ability to work with a high degree of urgency and prioritize projects/tasks, • Committed to meeting deadlines, • Excellent organizational skills, • Detail oriented with exceptional critical thinking, multi-tasking, and problem-solving skills, • Excellent time management, • Ability to communicate effectively through writing, speaking, active listening, and presentation, • Proficient computer skills. (Excel, Word, Power Point, Adobe), • Ability to approach conflicts with professionalism and a constructive manner, • Ability to work independently, with a team, and cross-functionally with other departments/stakeholders TAT Technologies Group is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities – TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran

Job Description Okie Staffing is seeking is seeking detail-oriented candidates that have experience building components that support the aerospace industry. We’re looking for a Deburr Operator to support a growing manufacturing team. If you take pride in precision work and enjoy hands-on production in a fast-paced environment — we want to hear from you. What You’ll Do: • Remove burrs and apply required surface finishes to sheet metal and machined parts, • Assemble aircraft components as required, • Read and interpret blueprints and finish callouts, • Use calipers and precision measuring equipment, • Install rivets and aircraft hardware, • Set up and operate micro-stop countersinks, • Layout parts and operate tools such as pneumatic hand routers and benchtop band saws, • Utilize basic shop tools including drill press, grinders, plasma cutter, fork truck, and welders What We’re Looking For:, • Ability to read and understand blueprints, • Understanding of sheet metal assembly and surface finishes, • Knowledge of deburring practices and aircraft component assembly, • Basic math skills, • Strong attention to detail, • Experience in deburring or aircraft assembly, • A minimum of 1 year experience responsible deburring fabricated, machined and manufactured products made from various alloys., • Technical school training (a plus), • Use basic shop tools, • Read Blueprints, • Have a basic understanding of aircraft hardware installation, • Have an understanding of surface finishes, • Have an understanding of sheet metal assembly, • Deburr practices, aircraft component assembly, rivet installations, • Skills: Must be able to perform basic math, Physical Requirements:, • Ability to lift up to 50 lbs multiple times per day Benefits Pay Rate $17.00/hr

Job DescriptionWhy You’ll Love This Cargo Handler JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Cargo Handler position with Atlantic Aviation at TUL in Tulsa, OK may be perfect for you! Pay: $16 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Cargo Handler job today!ResponsibilitiesCargo Handler Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsCargo Handler Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #cargohandler #Tulsa

Job Description Established in 1969, TAT Technologies (“TAT”) is a fast-growing profitable provider of aerospace thermal management, power and actuation products and repair services. TAT is a strategic global partner to leading players in the aerospace industry and specializes in providing innovative commercial, defense, OEM and repair/overhaul solutions. Our experience, flexibility, and commitment to meeting customer’s requirements have positioned us to be a trusted partner to some of the world’s leading aircraft manufacturers, OEM’s, airlines, MRO’s, air forces and defense organizations. TAT employs more than 600 employees’ worldwide, with facilities in the US and Israel. TAT Technologies Tulsa Site is recognized as a world leader in the Aerospace Industry. As the premier choice for Heat Transfer manufacturing and MRO, we provide high value alternatives to Commercial, Regional, and Rotary Aircraft customers worldwide. TAT Technologies Tulsa Site is also a premier in the Defense Industry and a preferred choice for Heat Transfer new manufacturing and MRO offering value solutions for our Military customers globally. We are seeking a dynamic, results-oriented Senior Manager of Customer Service to lead and optimize our customer support operations. The ideal candidate will have a proven track record in customer service leadership, strategic thinking, and team development. This role is crucial for ensuring an exceptional customer experience across all touchpoints and leading a team of customer service professionals to meet and exceed service targets. As Senior Manager of Customer Service, you will be responsible for overseeing the day-to-day operations of the customer service department, managing team performance, developing strategies to improve customer satisfaction, and collaborating with other departments to resolve complex issues. You will also be expected to drive initiatives for continuous improvement and help build a customer-centric culture within the organization. Requirements Main Responsibilities • Leadership & Team Management:, • Lead, mentor, and develop a team of customer service supervisors and representatives to ensure high performance, engagement, and professional growth., • Create a positive, results-driven culture, fostering open communication and collaboration across the team., • Monitor team performance and provide coaching, feedback, and performance reviews to achieve KPIs and service level agreements (SLAs)., • Customer Service Strategy:, • Develop and implement strategies for improving customer satisfaction and loyalty, including feedback loops, resolution protocols, and customer advocacy programs., • Identify trends, emerging customer issues, and potential areas for operational improvement., • Collaborate with the leadership team to align customer service objectives with overall company goals., • Align the team to the TAT CARE culture., • Operational Excellence:, • Ensure that the customer service department meets or exceeds established performance metrics, such as first response time, resolution time, and customer satisfaction scores., • Monitor and manage daily operations, including call volume, staffing levels, and workload distribution to ensure efficient service delivery., • Leverage technology and automation tools to improve service efficiency and streamline customer interactions., • Continuous Improvement:, • Drive initiatives to improve customer service processes, policies, and procedures based on customer feedback, data analysis, and industry best practices., • Champion the adoption of new tools and technologies that enhance the customer experience., • Proactively identify and address areas of concern or improvement within the customer service team., • Cross-Department Collaboration:, • Work closely with Sales, Marketing, Product, and other departments to address customer feedback, product issues, and service improvements., • Coordinate with the training and quality assurance teams to ensure staff is equipped with the right knowledge and tools to succeed., • Reporting & Analysis:, • Regularly analyze and report on key customer service metrics, trends, and performance to leadership., • Use data-driven insights to inform decision-making and highlight areas for operational improvements. Professional Experience / Qualifications • Education:, • Bachelor’s degree in Business Administration, Communications, or related field (preferred). Equivalent experience may be considered., • Certifications:, • PMP certification preferred., • Experience:, • Minimum of 7-10 years of experience in customer service, with at least 3-5 years in a managerial or leadership role., • Proven experience managing a team of customer service professionals, ideally in a fast-paced or high-volume environment., • Demonstrated success in improving customer satisfaction, reducing customer churn, and driving operational efficiency., • Strong experience with CRM software, customer service platforms, and analytics tools., • Skills:, • Excellent leadership and team management skills, with the ability to motivate and inspire teams., • Exceptional verbal and written communication skills, with the ability to convey complex information clearly and concisely., • Strong problem-solving abilities, with a focus on finding solutions to complex customer issues., • Highly organized with a keen attention to detail. TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Equal Employment Opportunities – TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Job DescriptionWhy You’ll Love This Aviation Technician JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Aviation Technician position with Atlantic Aviation at TUL in Tulsa, OK may be perfect for you! Pay: $16 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Aviation Technician job today!ResponsibilitiesAviation Technician Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsAviation Technician Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #aviationtechnician #Tulsa

Job DescriptionWhy You’ll Love This Line Service Technician JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Line Service Technician position with Atlantic Aviation at TUL in Tulsa, OK may be perfect for you! Pay: $16 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Line Service Technician job today!ResponsibilitiesLine Service Technician Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsLine Service Technician Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #lineservice #Tulsa

Assist Aircraft Fuelers in their assigned areas to ensure Fuelers are performing their duties in a professional, safe and efficient manner, according to Company/Carrier's standards. Prior Aircraft Fueling experience required. Experience Required 1 year: aircraft fueler.

Position Purpose: In a team-oriented work environment, under direct supervision loads, sets up and assists with the operation of autoclaves and auxiliary equipment to cure and bond metallic, fiberglass and carbon fiber aircraft parts. Basic set up and operation of autoclaves and auxiliary equipment

In a team-oriented work environment, under direct supervision loads, sets up and assists with the operation of autoclaves and auxiliary equipment to cure and bond metallic, fiberglass and carbon fiber aircraft parts. Basic set up and operation of autoclaves and auxiliary equipment to cure and bond m

Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Ensure accurate daily job charging to the aircraft.

Under general supervision, layout and construct tools from tool design, engineering drawings, and/or hand sketches.Perform the necessary calculations of the material needed to do the job.Principle Duties and Responsibilities.Set up and operate tool shop machinery and equipment to fabricate and assem

M-F 3pm-11:30pm (Will train on 1st shift M-F 7:30am-4pm).Inspects materials, parts, and products at internal and external receipt including different stages of production as well as from outside processing operations.Records observations, certificates of conformance, may provide first article inspec

Ensure accurate daily job charging to the aircraft. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft.

Move and/or obtain correct parts, materials, and tools, as necessary within the employee's assigned area as directed by management.Use of all precision measuring instruments required to accomplish work assignments.Capable of accessing and navigating electronic systems as required by the position pro

In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Perform preliminary and progressive inspections of a