Applications engineer jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Responsibilities: • Collaborate with project managers, landscape architects, and other stakeholders to develop project plans, specifications, and schedules., • Conduct site investigations and surveys to assess project feasibility and identify potential challenges., • Prepare detailed engineering designs, drawings, and calculations using AutoCAD, Civil 3D, and other software., • Coordinate with contractors, subcontractors, and project owner for construction projects., • Conduct quality assurance and quality control checks to ensure compliance with design standards, specifications, and regulations., • Prepare and submit permit applications, environmental assessments, and other regulatory documents as required., • Provide technical guidance and support to junior engineers, technicians, and other team members. Qualifications: • Bachelor's degree in civil engineering or related field, • Professional Engineer (PE) license in the state of New York, preferred but not required, • Minimum of 5 years of experience in civil engineering, with a focus on project design, • Proficiency in AutoCAD, Civil 3D, Microsoft Office Suite, and other engineering software., • Strong understanding of civil engineering principles, construction methods, and regulatory requirements., • Excellent communication, leadership, and problem-solving skills., • Ability to work independently, prioritize tasks, and meet deadlines in a fast-paced environment. Company DescriptionVisit our website to learn more about our company. our website to learn more about our company.

Job DescriptionDescription: Job Title: Principal Optical Engineer Department: R&D – Optical Reports To: VP of Advanced Optics Work Location: Onsite-Hybrid Salary Range: $100,000 - $140,000 FLSA Status: Exempt Featured Benefits: Medical, Dental, Vision, 401(k), FSA/HSA, Patent Incentives, Tuition Assistance, PTO, Life & Long-Term Disability Insurance, and more. About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacture and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer a portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Principal Optical Engineer will support R&D, new product development and production while directly reporting to the R&D/Optics group. It will be their responsibility to work within multidisciplinary teams to design, build and test optical mounting structures, alignment mechanisms and housings. They will be solely responsible for all reliability modelling and testing with respect to optical components and assemblies. This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Oversee test lab and provide optical engineering expertise., • Establish test procedures, processes, and documentation., • Review and organize test data., • Subject expert for geometric optics, LED illuminators, backlights, conventional micro-displays, collimators and concentrators, holographic systems, optical interference coatings, injection molding, lens design, and high precision optics design, fabrication and assembly., • Research and understand human factors and implement intelligent design choices for head mounted display systems., • Generate complete system documentation and provide input to technical proposals to effectively communicate designs and/or approaches to internal and external customers., • Validate system performance to prove the technical design through analysis, simulation, and laboratory testing., • Ensure proper procedures and methods are used by other members of the design team by providing a value-added quality review., • Independently develop and implement corrective action to product and procedural problems., • Communicate with the customer suppliers, and internal management as the technical expert on projects to effectively interface with all facets of decision-making personnel and customer management. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum of 8 years of detailed experience working in a product design environment., • Strong organizational, time management, and leadership skills; and the ability to successfully manage multiple tasks in a dynamic environment., • Familiarity with MS Project., • Familiarity with optical measurement techniques., • Must be able to demonstrate out-of-box thinking for unique problems and develop concepts into products., • Master’s degree in Optical Engineering, Physics or equivalent., • Familiarity with sequential and non-sequential programs like Zemax, Code V, etc. Travel: Travel including international travel up to 25%, if possible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Job Summary: The Sr Manufacturing Engineer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience., • Relevant certifications (i.e. MasterCam programming) are highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job DescriptionTeam Leader, Bridge Design Team Leader, Bridge Design Rochester, Buffalo, Syracuse, NY Description If you are a team player with a passion to drive your career in Bridge Design, we are the place for you! We are seeking a Team Leader to add to our growing and talented Bridge Design team. As a Team Leader specializing in Bridge design, your role will include managing a team of bridge design staff, managing projects, preparation of proposals, preparing complete project documents for transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design calculations, design details, specifications and cost estimates. Responsibilities: • Manages a team of Bridge Design staff, • Manages Bridge Design projects, • Manages the preparation of design calculations and details, • Manages the preparation of contract plans and specifications, • Manages the preparation of construction cost estimates, • Manages the review of construction submittals, • Performs occasional field visits to collect data and evaluate existing conditions, • Performs occasional field visits to resolve construction issues, • Performs oral presentations on technical topics to the public and other engineers, • Participates in business development activities, • Possesses advanced knowledge of applicable engineering principals and techniques, • Effectively expresses thoughts and ideas both verbally and in writing in the English language, • Proficient in the use of applicable computer software, • Performs assigned tasks accurately and efficiently, • Is an active and supportive team member, • Understands basic safety requirements, • Able to lead multiple projects, • Able to manage a team of Bridge Design staff, • Bachelor's or Master's degree in Civil/Structural Engineering, • 10 or more years of progressive experience in the field, • Professional office environment, • Occasional work outside of the office at project sites, • Travels occasionally within NY State and surrounding areas, • Interacts with other team personnel and clients, • Must physically be able to perform field inspection work, e.g., carry/climb ladders, wade in streams, work around traffic, work at heights, etc., • This job requires prolonged periods of sitting at a computer We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. If you are seeking a dynamic and rewarding career in the architecture and engineering field, we will offer you exciting opportunities to work on impactful projects, collaborate with talented professionals, and contribute to our continued success. As a certified minority-owned business enterprise (MBE) in New York, we embrace diversity and foster an inclusive work environment. Together, we can shape a future of innovative design, engineering excellence, and client & employee satisfaction. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/25/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionSalary: $60,000-$95,000 Our Technology: Safran Federal Systemsprovides assured positioning, navigation, and timing (PNT) solutions, and custom engineering services to U.S. Government agencies, defense organizations, and their contractors. Safran Federal Systems is authorized to work on the full spectrum of U.S. Government classified and unclassified projects, in addition to supporting strategic partnerships for key defense PNT technologies. The Opportunity: We are seeking a results-driven Applications (Sales) Engineer to join our team. This role is pivotal in driving our success in selling, implementing, and supporting our assured PNT and GNSS simulation products. The ideal candidate will be a strong technical player with great people skills and a drive to learn and succeed. Any background in demonstrating, integrating, and testing technical solutions while collaborating with sales, service, and support is highly desirable. The right candidate is more important than any specific skill, so if you think you may be a fit for this, please do apply. Job Responsibilities: Sales, Implementations, and Support: Provide technical assistance for sales activities, including implementations and escalated customer service issues related to Assured PNT and GNSS simulation products. Collaborate with Sales, Field Service Engineers, and Product Management to ensure seamless deployments and timely resolution of complex challenges. System Architecture and Analysis: Understand and clearly articulate the architecture and components of navigation, simulation, and timing systems. Use industry-standard equipment, tools, and in-house software (e.g., Panacea) to validate multi-sensor fusion PNT scenarios. Define and utilize key metrics to evaluate performance, reliability, and accuracy of PNT systems. Integration and Troubleshooting: Lead hands-on integration and testing efforts with software and hardware designs to verify system performance, reliability, and compliance. Apply knowledge of GPS/GNSS, timing signals, and simulations to address customer needswhether in sales engagements or resolving configuration issues. Perform system integration activities for PNT hardware, assessing the impact of various sensor configurations on overall navigation solutions. Customer Engagement and Escalation: Serve as a primary escalation point for critical technical engagements, such as complex troubleshooting, Proof of Concept (POC) initiatives, and high-stakes demonstrations. Stay customer-ready by maintaining both technical and sales acumen, participating in the sales cycle, and collaborating with Customer Support to ensure successful outcomes. Product Demonstrations and Market Intelligence: Organize and deliver product demonstrations and training sessions for current and prospective customers, as well as new team members. Attend conferences, seminars, and client meetings to promote products and services, while gathering competitor insights and market intelligence. Oversee the development of technical assetssuch as demo environments, POC frameworks, and enablement materialsto enhance both internal and customer-facing resources. Cross-Functional Communication: Build strong relationships across internal departments (Sales, Engineering, Product Management, Customer Support) to execute on customer requirements and foster a collaborative environment. Capture and relay customer insights to Product Management, influencing roadmap decisions and contributing to continuous product improvement. What you bring to Safran Federal Systems: • Bachelors degree in engineering, computer science, or a related field, or equivalent education or experience, • Minimum 2 years of experience in a customer-facing technical role (e.g., Applications Engineering, Sales Engineering, Field Support), preferably within GNSS, APNT, or simulation domains, • Ability to obtain and maintain a secret level security clearance. An active clearance is preferred but NOT required., • Proven proficiency in GPS/GNSS receivers, simulators, inertial navigation fundamentals, and oscillator holdover timing (preferred), • Experience with lab environments, hardware testing, and multi-sensor PNT integration, • Strong background in conceptualizing, planning, and delivering technical solutions, along with familiarity in Python or C/C++ (preferred), • Ability to innovate, independently manage tasks, and collaborate effectively in a team setting, • Excellent communication skills for interfacing with diverse audiences and driving technical discussions, • Familiarity or experience with defense industry processes, requirements, and security protocols (preferred), • Willingness to travel, up to 20% within the USA, to support on-site demonstrations, integrations, trade shows, and customer engagements, • Must be able to remain in a stationary position 50% of the time., • The person in this position will need to occasionally move about the office to access file cabinets, office machinery, and other equipment, and may need to lift, carry, or move objects weighing up to 25 lbs. as part of normal job duties. About Safran Federal Systems: Safran Federal Systems has been awarded as a Winner of the USA Today and Rochester Metro Area Top Workplaces 2025 Award. As part of the Safran group, we deliver advanced, assured PNT (Positioning, Navigation, and Timing) solutions to U.S. Government agencies and defense organizations. Through our acquisitions of Orolia (now Safran Trusted 4D) and Talen-X, we have expanded our portfolio and capabilities, allowing us to better support mission-critical requirements for our customers. Because we operate as a proxy-regulated company, free of Foreign Ownership, Control, or Influence (FOCI), we are approved to work on the full spectrum of U.S. Government classified and unclassified projects. We are committed to equal employment opportunity for all qualified applicants, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Note: This job description is not intended to list every responsibility, duty, or requirement of the position. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionJob Summary Vanteon is seeking applicants for a Digital Signal Processing Engineer position. The candidate will be responsible for modem and waveform development, digital signal processing, analysis & simulation for wireless systems, and RF system design. This is not an entry-level role; it requires advanced education and experience in communications and signal processing. Only qualified applicants will be considered for this position. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Develop and implement algorithms for digital signal processing applications., • Design and optimize digital filters, signal transforms, and other signal processing techniques., • Analyze and interpret data to extract meaningful insights and develop actionable recommendations., • Collaborate with cross-functional teams to integrate signal processing solutions into hardware or software systems., • Conduct performance evaluation and optimization of signal processing algorithms on various platforms., • Participate in the design and development of real-time signal processing systems., • Troubleshoot and debug signal processing algorithms and systems to ensure optimal performance., • Document design specifications, implementation details, and testing procedures., • Provide technical guidance and support to other team members on signal processing-related issues., • Conduct research and feasibility studies to explore new signal processing techniques and applications., • Perform simulation and modeling of signal processing systems using specialized software tools., • Mentor junior-level engineering staff members.Required Specialized Skills/Knowledge, • Technical experience with:, • Digital communications and RF systems experience, including modem and link margin analysis, • Hardware and FPGA development experience (VHDL or Verilog), • Digital filter techniques, Fourier Analysis, and tracking loops, • RF circuit design (cascades, mixing, amplifiers, filtering, oscillators, etc.), • Nonlinear circuits, measurements, and simulation techniques, • Experience with relevant software tools, including:, • MATLAB/Simulink, plus DSP Systems Toolbox (required), • MathWorks HDL Coder, • Mentor Graphics ModelSim, • LabVIEW, • TI Code Composer Studio, • Xilinx Vivado and Intel Quartus Prime, • Experience using signal generators, network analyzers, spectrum analyzers, and logic analyzers, • Knowledge of common wireless standards and techniques, • Technical project leadership skills, • Strong verbal and written communication skillsEducation and Experience, • Ideal candidates will have a Ph.D. (or be in candidacy) in Communications and Signal Processing, • MS. in Digital Signal Processing (minimum requirement), • 5+ years of experience in digital signal processing design (or related academic research)Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Minimal travel may be required for client visits and tradeshows., • Please note that all offers for hire are contingent on passing e-verification and background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. The position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. Relocation assistance of up to $15,000 may be available for well-qualified candidates. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging. We are seeking an experienced Senior Application Engineer to support our growing drives, controls, and mechatronic integration business. This position will help the successful launch and deployment of Allient Rochester’s new high-performance servo drives and control platforms. The Senior Application Engineer will work closely with customers, product engineering, and business development teams to apply, validate, and support these new technologies in high-performance applications. Apply now! Responsibilities: • Lead system-level application engineering for automation and motion control projects., • Support OEMs and machine builders in applying Allient’s integrated motion solutions, from concept through commissioning., • Perform system sizing and tuning of servo motors, drives, and motion axes to meet performance and precision requirements., • Develop, test, and troubleshoot control logic using IEC 61131 programming environments (e.g., Structured Text, Ladder Logic)., • Provide technical support during system integration, factory acceptance, and field deployment., • Customize and configure motion control software, HMIs, and PLCs as part of turnkey sub-system solutions., • Collaborate with sales, engineering, and manufacturing teams to ensure solutions are aligned with customer needs and system performance goals., • Assist in application documentation, test plans, and customer training as needed., • Bachelor’s degree in Electrical Engineering, Mechatronics, or a related technical field., • 5+ years of experience in automation or motion control system design and implementation., • Strong background in servo system sizing, tuning, and commissioning., • Proficient in IEC 61131-3 programming languages (Structured Text, Ladder, etc.)., • Working knowledge of motion controllers, drives, servo motors, and feedback systems., • Excellent troubleshooting, communication, and customer-facing skills., • Ability to work independently and as part of a multidisciplinary team., • Experience with Python programming is a plus., • Willingness to travel up to 50%, including time at customer sites and the Rochester, NY facility. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionDescription: WeTheHobby is a thriving sports entertainment company with global reach, headquartered in Rochester, NY. We value creativity, diversity, innovation, dedication, and our community! Our work environment includes: • Modern office setting, • Strong growth opportunities, • Flexible working hours, • Lively atmosphere, • A team that cares about one another, • Welcoming and inclusive culture WeTheHobby is looking for a skilled and solution-driven Senior Software Engineer to design, develop, and maintain the server-side logic, database architecture, and APIs that support our platforms. You will work closely with front-end developers, product managers, and other stakeholders to create scalable and secure systems that enhance our customer experience. This role is based out of our innovative sports card store in the Neighborhood of the Arts, Rochester, NY. Key Responsibilities: • Take ownership of the design, development, and maintenance of scalable and robust backend services., • Application design, including the authoring of design documents, flow charts, sequence diagrams, and other artifacts that make successful on-time delivery possible., • Create and optimize database schemas, queries, and models for performance and scalability., • Ensure applications are scalable, secure, and maintain high uptime for our growing user base., • Collaborate with cross-functional teams to gather requirements and translate them into technical solutions, ensuring alignment with business objectives., • Ensure the scalability, performance, and reliability of the applications you build., • Leading service/software implementation by contributing to the codebase, acting as an example of how to write testable, maintainable code which can adapt to the changing needs of our users., • Work on payment gateways, live streaming tools, and other third-party integrations to enhance platform functionality., • Maintain comprehensive technical documentation for internal and external use., • Work closely with front-end developers, designers, and stakeholders to integrate user-facing elements with server-side logic, • Participate in planning and strategy meetings to align technical solutions with business goals., • Ensuring the quality of the application development remains high through the application of best practices like automated testing, peer code reviews, and automated CI/CD pipelines., • Stay updated with the latest industry trends and technologies to bring innovative solutions to the team., • 5+ years of professional experience in backend development, • At least 2 of those years have been focused on designing, building, deploying, and maintaining DOTNET Applications, • 5+ years leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience, • Strong knowledge of database design, modeling, and optimization (both SQL and NoSQL), • Hands-on experience with AWS services Technical Skills: • Strong understanding of GraphQL, Rest, sockets, SignalR pub/sub and buses preferred., • Experience with enterprise software development platforms, Dotnet., • Knowledge of modern software development practices and tools (CI/CD, Git, Docker, etc.)., • Familiarity with modern frameworks, Express.js, Dotnet., • Knowledge of microservices architecture and best practices, event-driven architecture a plus, • Understanding of security best practices in software development, • Experience with eCommerce platforms or systems (e.g., BigCommerce, Square), • Familiarity with front-end frameworks (e.g., React.js) for better collaboration Soft Skills: • Excellent problem-solving skills and attention to detail, • Proven ability to work effectively in small teams with excellent communication skills., • Strong multitasking skills, capable of handling multiple projects simultaneously., • Eagerness to learn and adapt to new technologies and challenges, • Ability to work in a fast-paced environment and adapt to changing requirements. Education: • Bachelor's or Master’s degree in Computer Science, Engineering, or a related field. In accordance with applicable Federal and State laws, the anticipated salary range for this position based upon location in Rochester, NY and experience is $98,000 - $132,000 To comply with Federal law, WeTheHobby participates in E-Verify. All newly-hired employees are verified through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to confirm their identity and employment eligibility.

Job DescriptionSenior Substation Engineer Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific duties include: • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionSalary: $68K-$80K Were looking for an Enterprise Solutions Engineer to join our growing team in West Henrietta, NY! This is a hybrid opportunity. Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: The Enterprise Solutions Engineer plays a pivotal role in designing, delivering, and supporting innovative business solutions across the organization. This position blends technical expertise with strategic collaboration to solve complex business challenges using modern technologies. The Day to Day: • Solution Design & Delivery, • Collaborate with internal stakeholders to define business challenges, uncover root causes, and document functional and technical requirements., • Design and implement end-to-end business solutions from proof-of-concept to production using a mix of enterprise systems, cloud tools, and custom applications, • Serve as the primary owner of the solution lifecycle: development, testing, user acceptance, deployment, support, and documentation, • Technology Enablement, • Leverage the Microsoft Power Platform (Power Apps, Power Automate, Power BI, Dataverse) to build low-code/no-code solutions., • Explore and implement emerging technologies, including AI, machine learning, and automation frameworks, to drive business process improvements., • Integrate disparate enterprise systems through APIs, middleware, or ETL tools as needed., • Data Management & Visualization, • Perform data analysis to support solution design and business decision-making., • Create dashboards, visualizations, and reports that enable self-service insights and operational transparency., • Customer Engagement & Collaboration, • Act as a trusted partner and technical advisor to internal business units., • Facilitate user training, documentation, and change management to ensure successful solution adoption., • Provide post-deployment support, incident resolution, and enhancements. What you Bring to Safran: • Bachelor's degree in Information Systems, Computer Science, Engineering, or related field; equivalent experience considered., • 3+ years of experience in a technical solution delivery role (e.g., Systems Engineer, Business Systems Analyst, Applications Developer)., • Proven experience with Microsoft Power Platform (Power Apps, Power Automate, Power BI)., • Strong analytical and problem-solving skills with attention to detail., • Working knowledge of databases (SQL Server, PostgreSQL, etc.) and API integration., • Experience with UAT coordination, deployment strategies, and user documentation., • Excellent communication and interpersonal skills; ability to translate technical concepts to non-technical stakeholders. Preferred Qualifications: • Experience implementing AI solutions (e.g., Azure AI, OpenAI, Copilot)., • Familiarity with enterprise business systems (ERP, CRM, HRIS, etc.)., • Experience in process mapping, Lean/Six Sigma, or continuous improvement methodologies., • Background in Agile or DevOps environments. Visit ourwebsitefor more information or check out our videos onYouTube At Safran Electronics & Defense, youll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and support services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible to engage an assigned list of existing and prospective accounts seeking to learn how Stark Equipment's Critical Power Division can help align Siemens product and service offerings with current and future facility infrastructure needs. This position will focus on providing design assistance, configure product offerings and help set pricing strategies for power distribution equipment on new applications and existing facility critical power equipment. Successful performance will be directly related to achieving revenue & gross profit targets & account management attainment benchmarks. What are we looking for: • At least 5 years of industry (power distribution) experience required., • Technical understanding of Electrical Power systems required., • Capability to mentor and foster a healthy team environment., • Ability to multi-task, work under pressure and meet deadlines required., • Must be able to deal with a large volume of work in a fast-paced, time-sensitive environment., • Ability to drive individual sales success., • In-depth knowledge of the market. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job Description Akkodis is recruiting for a Controls Engineer in Rochester, NY. As a Controls Engineer, you will be responsible for the design, development, and implementation of electromechanical hardware and software solutions. Expertise in PLC programming, schematic design, electrical testing, and troubleshooting is required. The salary for this Controls Engineer is from 90K to 100K. The rate may be negotiable based on experience, education, geographic location, and other factors. Key Responsibilities for the Controls Engineer include: * Create and review electrical schematics, wiring diagrams, and other technical documentation. * Develop and maintain PLC software for various applications, including automation, process control, and robotics. * Assist in creating specifications, critical parameters and statement of work. * Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development. * Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability. * Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment. * Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies. Participate in all phases of the product lifecycle, from concept and design to manufacturing, testing, and installation. Requirements for the Controls Engineer include: Bachelor's degree in Electrical Engineering or a related field. * 3 years of experience in electromechanical hardware and software design and development. * Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell). * Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN). * Experience with electrical testing equipment and procedures. * Excellent analytical, problem-solving, and troubleshooting skills. * Strong communication, interpersonal, and teamwork skills. * Ability to work independently and as part of a team. * Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing). * Knowledge of C programming * Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. If you are interested in this Controls Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Mike Keegan at 585-465-1236 or mailto:"> Benefit offerings available for our associates include medical, dental, vision, and a 401K plan. Pay Details: $90,000.00 to $100,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Position Summary: The Field Service Engineer plays a key role in ensuring the successful delivery and performance of JCS systems at customer sites. This position provides hands-on support to both our internal project teams and our customers by leading the startup, commissioning, and troubleshooting of JCS process equipment. To succeed in this role, the engineer must combine strong technical knowledge of process applications with a practical understanding of system functionality, ensuring that equipment is installed, optimized, and performing to JCS’s high standards. The role also requires clear communication, problem-solving skills, and the ability to partner effectively with customers and colleagues in dynamic environments. Responsibilities: • Establish and maintain a continuous positive relationship with customers, including support and follow-up on customers' concerns and problems, • Perform troubleshooting and fault-finding services on site, online, and by phone, • Perform and execute Factory Acceptance Testing, • Perform site management, process engineering, mechanical engineering, controls and automation engineering for start-up and commissioning of JCS engineered systems, • Execute site acceptance testing – partner with customer, manage and/or support startup team for this function, • Document and maintain written records of services performed on behalf of JCS, • Take an active role in project support in the following areas:, • Project site management, installation, start-up and commissioning support, • Building electrical panels, checkout and testing assistance, • Process systems installation, calibration, testing and checkout, • Control systems Installation, calibration, testing and checkout, • Minimum 3 years experience in service-related functions, in Food and Beverage or related industry, • Strong working knowledge of software (preferably with PLC programming) and hardware applications, including instrumentation testing and calibration equipment., • Knowledge and hands-on experience with the repair and service of process-related machines and products., • Prior technical, mechanical, and electrical training. Must be able to read and work with electrical schematics, piping and instrumentation diagrams (P&IDs) and other related drawings., • A valid driver’s license and related documents to travel by car or air within the US and Canada, • Ability to work irregular hours, including overnight, with travel up to 75% of the time. Travel may consist of 1 day to multiple weeks at a given time., • Sit, climb, stand, bend, kneel, walk, squat, bend, reach and work in hot or cold temperatures., • Light physical effort with frequent lifting or moving of lightweight materials up to 40 lbs., • Ability to see and handle small parts and wires of different colors. What's in it for you: Working at JCS is like working with family. We offer competitive pay with a full array of benefits, including: • Nine paid holidays, • Paid time off (PTO), • Health and dental insurance with a generous premium contribution by JCS, • Short-term and long-term disability insurance, paid by the company, • Group life Insurance, paid by the company, • A 401(k) Retirement Savings Plan, currently with a matching contribution

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionDescription: Please note this position is based in Penang, Malaysia As a Software Engineer, you’ll develop firmware for ARM-based systems running FreeRTOS, edit VHDL for Lattice processors, and support our toolchain (Jira, GitHub, CI/CD). You’ll contribute to software design tool development, collaborating with a team of 3-4 engineers based in Penang, Malaysia to advance induction heating systems. We value self-starters with a strong work ethic and agility. Responsibilities • Develop, debug, and optimize C code for embedded applications on ARM processors with FreeRTOS, ensuring performance and reliability., • Update VHDL code for Lattice processors to enable FPGA-based functionality., • Support the setup and maintenance of Jira, GitHub, and CI/CD workflows for secure, streamlined development., • Contribute to creating and deploying software design tools to optimize development processes., • Troubleshoot firmware issues using debugging tools like oscilloscopes, logic analyzers, and JTAG., • Participate in code reviews, ensuring adherence to best practices and providing constructive feedback., • Collaborate with multidisciplinary teams to meet system requirements and integrate firmware with hardware.Requirements:, • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • 3-7 years of experience in firmware development for embedded systems., • Strong C programming skills for real-time, resource-constrained environments., • Experience with VHDL and FPGA development, ideally with Lattice processors., • Proficiency with RTOS (e.g., FreeRTOS) and peripheral interfaces (e.g., SPI, I2C, UART)., • Knowledge of hardware debugging tools (e.g., oscilloscopes, logic analyzers, JTAG) and version control (e.g., Git)., • Proactive, with strong problem-solving, analytical, and communication skills., • Ability to work agilely in a collaborative, fast-paced team.

Project Engineer, Bridge Design Rochester (preferred), Buffalo, Syracuse, NY Description If you are a team player with a passion to drive your career in Bridge Design, we are the place for you! We are seeking a Project Engineer to add to our growing and talented Transportation team. As a Project Engineer specializing in Bridge design, your role will include preparing complete project documents for structural components of transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design calculations, design details, specifications and cost estimates for structural components of transportation projects. Responsibilities • Oversees and performs the preparation of design calculations and details, • Oversees and performs the preparation of contract plans and specifications, • Oversees and performs the preparation of construction cost estimates, • Oversees and performs the review of construction submittals, • Assists with the management of projects, • Leads field visits to collect data and evaluate existing conditions, • Leads field visits to resolve construction issues, • Coaches junior staff Required Skills • Possesses knowledge of applicable engineering principals and techniques, • Effectively expresses thoughts and ideas both verbally and in writing in the English language, • Proficient in the use of applicable computer software, • Performs assigned tasks accurately and efficiently, • Is an active and supportive team member, • Understands basic safety requirements, • Valid Driver's License Experience • Bachelor's or Master's degree in Civil/Structural Engineering, • 5 - 10 years of progressive experience in the field, • Professional Engineer (PE) Work Environment • Professional office environment, • Occasional work outside of the office at project sites, • Travels occasionally within NY State and surrounding areas, • Interacts primarily with other personnel, • Receives close supervision, training and mentoring when necessary Physical Demands • Must physically be able to perform field inspection work, e.g., carry/climb ladders, wade in streams, work around traffic, work at heights, etc., • This job requires prolonged periods of sitting at a computer, • This job requires the ability to lift up to 25lbs About Us We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : DO5-1854313 -- in the email subject line for your application to be considered.*** Danielle Olson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Senior Substation Protection and Controls Engineer Rochester, Syracuse, Binghamton, or NYC MUST HAVE PE LICENSE Description We are seeking a Senior Substation Protection and Controls Engineer to join our growing Rochester, NY team. The Senior Substation Protection and Controls Engineer is required to work within a multi-discipline team to develop efficient and reliable Protection & Control systems. The incumbent will coordinate their design activities to maintain project schedules and ensure successful project completion. The incumbent will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific Duties Include • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes., • Develop and review technical specifications, drawings and standards of equipment/ projects., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Create a complete substation P&C design including One-Line, Three-line, AC/DC Schematics, and Wiring Diagrams., • Maintain complete project documentation with respect to engineering studies and calculations, all design packages, as-built requirements and return data information., • Maintain good working relationship with internal groups that support project such as other Engineering disciplines, Drafting, Procurement, Construction and Project Management etc., • Selection of equipment and material and preparation of specifications for material, equipment, construction and installation work., • Develop relay setting calculations and coordination reports., • Review of internal and external designs for code compliance, good design practice and constructability., • Coordinate design activities with other multi-discipline project team members., • Construction support including resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to relay settings and calculations, all design packages, as-built requirements and return data information. Maintaining good working relationship with internal groups that support projects such as other engineering disciplines, Drafting, Project Management etc., • Mentoring and providing guidance to developing engineers within the department., • Lead the development of design standards Required Skills • Experience with AutoCAD Electrical and Substation Design Suite (SDS) is a strong plus., • Experience on MathCAD, ASPEN or ETAP software is an asset., • Experience on relay setting and coordination is a must., • Experience in the design of wiring schematics is a must., • Experience in SEL and GE relay programming is desirable., • Experience on PSCAD or EMTP software is an asset., • Knowledge of modern power system, power system protection and relay technologies., • Strong client focus., • Knowledge of codes and standards. Experience/Education • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License, • A minimum of 7 years' experience in substation protection and control design. About Us We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : DO5-1854306 -- in the email subject line for your application to be considered.*** Danielle Olson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Senior Substation Engineer Rochester, Syracuse, Binghamton, or NYC Description We are seeking a Senior Substation Engineer to join our growing team. The Senior Substation Engineer is required to work within a multi-discipline team to design efficient and reliable electrical substations. The engineer will coordinate his/her design activities to maintain project schedules and ensure successful project completion. The engineer will also assist the Estimating Team in preparation of estimates and project proposals. Aside from engineering duties, we are looking for the incumbent to be able to provide a presence to our area clients. We are looking for someone to be our "face" to the client. Significant client face time and interaction is required. A strong business sense would be beneficial. This position is accountable to provide design activities in accordance with applicable codes and standards, including our policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. Specific Duties Include • Prepare conceptual design of the complex projects, • Carry out/review/analyze complex technical studies and project scopes, • Preparation of project specifications for material and equipment purchase and installation., • Review the design based memorandum, detailed engineering scope and guide the assigned discipline engineers to align the engineering deliverables per project requirements., • Work closely with peers to ensure accurate delivery and thorough electrical design that will meet industry standards and specifications, and meet good engineering practices., • Design of electrical substation facilities including site and bus work layouts, ground grids, conduit layout, lightning protection, control house design, lighting studies, and metering., • Review of internal and external designs for code compliance, good design practice and constructability., • Resolving site queries, attending site meetings and performing site inspections during the construction phase of projects., • Maintaining complete project documentation with respect to substation design and construction, including all completion packages, as-built requirements and return data information., • Making and maintaining appropriate commitments to project teams and coordinating design activities with multi-disciplined project team members., • Maintaining good working relationships with internal groups that support projects., • Maintaining good working relationships with material suppliers, contractors, and any others that affect the quality, schedule and cost of projects., • Mentoring and providing guidance to developing engineers within the department., • Lead the development of design standards Required Skills • Experience with Autodesk Inventor and Substation Design Suite (SDS) is a strong plus., • Experience with WinIGS and CYMCAP is preferred, • Strong client focus., • Knowledge of codes and standards such as IEEE and ANSI Experience/Education • A degree Electrical Engineering from a recognized institution., • Professional Engineering (PE) License, • A minimum of 7 years' experience in substation design. About Us We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: • Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : DO5-1854297 -- in the email subject line for your application to be considered.*** Danielle Olson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/27/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Lead system-level application engineering for automation and motion control projects. Collaborate with sales, engineering, and manufacturing teams to ensure solutions are aligned with customer needs and system performance goals. Bachelor's degree in Electrical Engineering, Mechatronics, or a related

This includes, but is not limited to, contributing to the design and building of Azure Integration Services, Azure Data Services (Azure Data Factory, Fabric), and data pipelines. Strong knowledge of Azure including experience provisioning, monitoring, supporting and maintaining Azure services includ

Electrical Engineer Job Duties: Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials. Pr

The Senior Application Engineer will work closely with customers, product engineering, and business development teams to apply, validate, and support these new technologies in high-performance applications. Lead system-level application engineering for automation and motion control projects. Collabo

Job DescriptionJob Description .Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging.This position wil

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Physical Security Specialist. The Specialist is responsible for the software-specific support of our installation team to include the integration and interface of multiple disparate software applications into fully functioning solutions. This position will be responsible for all levels of system head-end commissioning, upgrades, and advanced diagnostics to achieve the defined functionality of system operation. Pay: $70,000 - $95,000 per year RESPONSIBILITIES: • Capable of advanced integration between disparate electronic security systems, • LAN & Network configurations experience include wireless communications system, • Perform system diagnostic, programming, troubleshooting, configuration scripting and service analysis duties to ensure a fully functioning system, • Work with Project Managers, End Users and Technician team to provide assistance in regards to the software systems, • Troubleshoot project issues and engage appropriate resources as needed, • Escalate significant issues to the management team as needed, • Work with the Project Management team to coordinate project and work schedules to ensure project efficiencies, • High School Diploma or equivalent experience, • In-depth knowledge of industry-leading security system and equipment providers, • Advanced working knowledge of Windows-based platforms, including desktop and server versions, as well as VB scripting., • Ability to read and understand advanced technical information and documentation, • Proficient with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Associates or Bachelor's degree in computer science or related field, • Two (2) plus years in a technical support software or relatable field, • Certification with major enterprise-level security/access control systems, • Certifications in the following Software platforms are preferred, • Symmetry Access Control, FLIR, Axis, Milestone, Agent VI, Commend, and Guardian Shooter Detection, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1446692

At MVP Health Care, we're on a mission to create a healthier future for everyone - which requires innovative thinking and continuous improvement. To achieve this, we're looking for an Associate, Deskside Support Engineer to join #TeamMVP. If you have a passion for working with the latest technology and interacting with customers, this is the opportunity for you. What's in it for you: • Growth opportunities to uplevel your career, • A people-centric culture embracing and celebrating diverse perspectives, backgrounds, and experiences within our team, • Competitive compensation and comprehensive benefits focused on well-being, • An opportunity to shape the future of health care by joining a team recognized as a Best Place to Work for and one of the Best Companies to Work For in New York Qualifications you'll bring: • An AA/AS or BA/BS in a technical discipline, Computer Science preferred., • IT certification, such as A+, MCDS, or equivalence experience as a deskside support technician or similar role, • The availability to work on-site, full-time., • 3+ years Computer Hardware experience require, • 3 years customer service experience, • Proven experience in providing technical support and problem solving/troubleshooting skills in an office environment., • Microsoft 365 Cloud Platform (Intune/Entra/Azure), • Experience with Windows 10/11, • Proven experience in providing technical support and problem solving/troubleshooting skills in an office environment., • Strong knowledge of computer hardware, software, and operating systems., • Curiosity to foster innovation and pave the way for growth, • Humility to play as a team, • Commitment to being the difference for our customers in every interaction Your key responsibilities: • Provide deskside support to office staff, resolving technical issues and troubleshooting problems in a timely manner., • Install, configure, and maintain hardware and software, including computers, printers, and other office equipment., • Collaborate with the Digital team to implement and maintain security measures, ensuring the protection of sensitive data and information., • Assist in the setup and configuration of new workstations, ensuring they are properly connected to the network and have the necessary software installed., • Conduct regular maintenance and updates on office technology, ensuring optimal performance and minimizing downtime., • Train office staff on the proper use of technology and software applications, promoting efficiency and productivity., • Document and track technical issues and resolutions, maintaining accurate records for future reference., • Stay up-to-date with the latest technology trends and advancements, continuously improving your technical skills and knowledge., • Other duties as assigned by leadership . Onsite- Rochester, NY Office Pay Transparency MVP Health Care is committed to providing competitive employee compensation and benefits packages. The base pay range provided for this role reflects our good faith compensation estimate at the time of posting. MVP adheres to pay transparency nondiscrimination principles. Specific employment offers and associated compensation will be extended individually based on several factors, including but not limited to geographic location; relevant experience, education, and training; and the nature of and demand for the role. We do not request current or historical salary information from candidates. MVP's Inclusion Statement At MVP Health Care, we believe creating healthier communities begins with nurturing a healthy workplace. As an organization, we strive to create space for individuals from diverse backgrounds and all walks of life to have a voice and thrive. Our shared curiosity and connectedness make us stronger, and our unique perspectives are catalysts for creativity and collaboration. MVP is an equal opportunity employer and recruits, employs, trains, compensates, and promotes without discrimination based on race, color, creed, national origin, citizenship, ethnicity, ancestry, sex, gender identity, gender expression, religion, age, marital status, personal appearance, sexual orientation, family responsibilities, familial status, physical or mental disability, handicapping condition, medical condition, pregnancy status, predisposing genetic characteristics or information, domestic violence victim status, political affiliation, military or veteran status, Vietnam-era or special disabled Veteran or other legally protected classifications. To support a safe, drug-free workplace, pre-employment criminal background checks and drug testing are part of our hiring process. If you require accommodations during the application process due to a disability, please contact our Talent team at .

Job DescriptionHeavy-Highway Estimator Job Title: Heavy-Highway Estimator Location: Fairpoint, NY Salary: $70K-$125K + Bonus Benefits: Health Insurance + PTO + 401k with Match Requirements: Heavy-Highway experience at a General Contractor Position Overview We are a privately-owned civil construction company in business for 45 years, and we handle bonded work for local municipalities, state and federal agencies. Position Overview We are currently in search of an Estimator for our heavy-highway projects. We are open to considering all experience levels, even those with no estimating experience. However, having prior heavy-highway experience at a general contractor is a must to be considered. Estimating experience is preferred, but we are also open to Project Managers and Superintendents with heavy-highway experience at a GC that want to be trained on estimating. Key Responsibilities • Prepare project bids for highway construction and other fields, • Performing accurate takeoffs, • Cost estimation, • BS in Civil Engineer or Construction Management preferred but not required, • 3+ years of heavy-highway construction, • Prior experience at a General Contractor in the heavy-highway space, • Heavy-highway estimating experience is preferred but also open to PMs or Supers that want to learn estimating, • Base Salary ($70K-$125K), • Annual Bonus, • Medical, Dental, Vision Insurance, • Paid Time Off, • 401(k) with Match - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 08/20/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Christa Construction – Customer Satisfaction through Quality, Service, and Value!! Christa promotes an environment of professional development and creative thinking that demonstrates our commitment to hiring and retaining the best people in the industry. Our team comes first, it’s known through our multiple awards such as Greater Rochester Chamber Top 100 Companies and Rochester’s Top Workplaces. As an employer, we’re focused on your growth in the company. From leadership development programs, state-of-the-art technology and an open-door policy to learn from each other, you own your personal growth and impact in the company as well as your career. We thrive on our outstanding client service and expertise. We are trying to ensure we are bringing the right kind of individual to join our team. • Does your work ethic typically outshine the ones around you?, • Do you know that you have the skills to impress, and the drive to deliver the highest quality in every situation?, • Is your history bursting with examples of your personal and professional success?, • Are you ready to catapult your career alongside the top professionals in the business?, • Are you the next best thing to happen to Christa? Let’s chat and see! Core Values: Christa’s Core Values inform our decisions and actions at all levels. They serve as ‘guard rails’ for behavior between employees, clients, subcontractors, suppliers, and other stakeholders. Communicating Christa’s Core Values and ensuring everyone internalizes them is essential to fostering and maintaining our amazing culture. Christa cares about: • Integrity: Clients, suppliers, employees, and communities we serve know we build with integrity., • Safety: We prioritize safety every day, on every job site., • Ownership mindset: We are responsible for our actions and accountable for results. Treat every project like it is your own., • Quality: We build every project with quality, exceptional service, & innovative construction methods., • Communication: We understand clients’ expectations, then deliver with clarity and transparency to the entire project team., • Balance: We are committed to hard work, balanced with creating time for family, friends, and fun. How will working for Christa benefit you? Not only will you be a part of a wonderful team of industry-leading professionals, but Christa offers great benefits including: Health Dental and Vision, generous 401K matching, PTO, Life & LTD, Tuition Reimbursement, Career Training and Development support, Valuable experience, and more! A successful Project Manager at Christa will provide project leadership while promoting Customer Satisfaction through quality, service and value. ESSENTIAL FUNCTIONS: • Supervises and directs the overall project. Duties include planning and coordinating activities with others; circumventing/resolving problem areas; and ensuring all company/project policies, procedures, and standards are maintained., • Achieves customer satisfaction by meeting or exceeding customer expectations. Customers include owners, architects, contractors, subcontractors, vendors, and employees., • Manages, directs, organizes, coordinates, and schedules the work of staff in their respective corporate divisions, • Ensures that projects are being managed effectively and are effectively operated, • Is responsible for the profitability of assigned projects and the completion of work per schedule and utilizes corporate standard operating procedures to accomplish this goal, • Solicits, purchases, writes, and manages contracts, contractors, and vendors in the execution of work, • Responsible for developing the financial schedule of values inclusive to the overall project budget., • Prepares and distributes payment applications on a monthly basis, • Tracks all project costs and prepares monthly cost to complete reports, • Cost codes all project invoices, • Solicits, procures, and manages the labor, material, and equipment necessary to execute the work of several projects, • Actively participates in the solicitation and procurement of new and future employees, • Ensures that standard administrative operating procedures are being complied with, • Creates, updates, and monitors construction schedules using Microsoft Project and adheres to company scheduling standards and practices, • Creates and submits all project RFIs and submittals, • Prepares and distributes all project meeting minutes, • Manages and maintains all changes to projects by posting drawings, updating Project Sight and creating as-built drawings, • Manages the closeout process at the end of projects to submit to appropriate parties, • Trains, mentors, and motivates the Assistant Project Manager and/or Project Engineer assigned to their projects QUALIFICATIONS & RESPONSIBILITIES: Top candidates will have 5-10 or more years of commercial construction project management experience (preferably in wood frame multi-family projects) and should be able to lead multiple projects. They will also take ownership of the project success with special consideration to schedule and budget adherence, and have the personal attributes to manage, direct, mentor and support employees through their daily work while demonstrating Christa’s corporate philosophy of outstanding business ethics and principles. Top candidates will also have advanced skills in the use of technology including MS Office products, PROCOR, and P6/Oracle. Advances skills in comparable programs will be considered equivalent. Project Managers typically have a range of physical requirements, including: • Mobility: Ability to move around job sites, which may involve climbing stairs, ladders, or scaffolding., • Stamina: Capability to work long hours, often on-site, which can include standing for extended periods and walking significant distances., • Vision: Good eyesight for reading blueprints, plans, and safety signage, as well as inspecting work., • Hearing: Ability to hear instructions, warnings, and safety alerts in a noisy construction environment., • Manual Dexterity: While not as hands-on as other roles, project managers may need to use tools or equipment occasionally, so basic manual skills can be beneficial., • Strength: While not always required, some physical strength may be necessary for tasks like lifting or carrying equipment, especially during site visits., • Coordination: Good hand-eye coordination is useful for tasks that require writing, reviewing plans, or interacting with technology., • Safety Awareness: Understanding and adhering to safety protocols is crucial, as construction sites can pose various hazards. Compensation for qualified candidates is determined by multiple factors including but not limited to verifiable experience, education, and technical skills. The pay range for this position is: $55-$100k annually Nestled on the shores of Lake Ontario, Rochester, is a vibrant city known for its rich history, dynamic economy, and diverse cultural scene. With a legacy of innovation and a strong sense of community, Rochester is the perfect place to live, work, and explore. The city boasts a history of groundbreaking achievements in technology and industry. As the headquarters for several major companies, Rochester continues to thrive as a center for innovation, research, and development. Rochester’s diverse economy includes strong sectors in healthcare, education, manufacturing, and technology. The region offers numerous opportunities for businesses and entrepreneurs, supported by a collaborative environment and a skilled workforce. You can also experience the arts and culture of Rochester through its world-class museums, theaters, and music venues. The George Eastman Museum, Rochester Philharmonic Orchestra, and the Strong National Museum of Play are just a few highlights of what is offered. Rochester is also home to an array of parks and outdoor spaces, including the scenic Highland Park and the picturesque Genesee Riverway Trail. Enjoy outdoor activities, festivals, and seasonal events throughout the year. Finally, Rochester is renowned for its high-quality educational institutions. These institutions drive research, innovation, and a culture of learning. Company DescriptionAffordable housing and apartmentsAffordable housing and apartments

Applications Engineers will be responsible to lead other Applications Engineers in quoting efforts in addition to reviewing others work as directed from Applications Management. Bachelor of Science degree in Mechanical/Electrical Engineering, Computer Engineering, Electrical Engineering Technology,