Best manufacturing jobs in New Brunswick, New JerseyCreate job alerts

Job Description Position Overview: This position is responsible for performing a wide range of semi-skilled and skilled maintenance, repair, and restoration work across manufacturing, office, and support areas. This role supports the installation and relocation of production and office equipment, monitors and performs minor upkeep of major utility systems, and ensures general building, grounds, and facility operations are maintained in a safe and functional condition. Key systems supported include air compressors, furnaces, chillers, vacuum pumps, HVAC equipment, plumbing, and general building infrastructure. This position plays a critical role in maintaining production readiness and overall facility reliability. Key Responsibilities: • Support daily operations of manufacturing plants, buildings, and office areas under the direction of the Facilities Director and Facilities Supervisor, • Install, relocate, and remove production equipment using rigging, forklifts, pallet jacks, equipment skates, and similar tools, • Connect equipment to facility utilities including water, coolant, compressed air, vacuum, and wastewater drainage, • Maintain and repair building systems and components including doors, turnstiles, plumbing fixtures, leaks, locks, stairs, racking, guardrails, monitors/TVs, wastewater pumps, and related infrastructure, • Relocate office furniture and equipment; install or remove cubicles, signage, shelving, worktables, and filing cabinets as needed, • Serve as the first line of response to facility and production support issues prior to engaging external contractors for major system repairs (e.g., air compressors, vacuum pumps, furnaces, chillers, RODI systems, nitrogen systems), • Technician is not expected to perform major equipment repairs but must understand system operation and provide temporary solutions and guidance, • Conduct daily facility and property inspections to identify safety concerns and take immediate corrective action, • Perform a broad range of skilled maintenance tasks over extended periods, • Complete work in compliance with OSHA regulations and safety practices, including lockout/tagout procedures, • Read and interpret sketches, diagrams, and blueprints, • Fill in for janitor/custodial functions, when necessary., • Source parts for repairs and regular maintenance., • Coordinate with external service providers for equipment and facilities repair, when required., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices., • A minimum of 7 years of Maintenance Experience. Including methods, practices and equipment used in facilities management and activities, including a variety of building trades work., • High School Graduate required. College or Trade School preferred., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • Knowledge of tools and equipment used in building maintenance, reconstruction and repair work., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Versatile "jack-of-all-trades" maintenance skill set, • Plumbing experience required, primarily PVC socket weld and occasional threaded pipe, • HVAC experience strongly preferred, • General mechanical aptitude, • General construction knowledge (e.g., wall repair, painting), • Must be able to lift 70 lbs, • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Majority of facilities are air-conditioned year-round About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Must Have Technical/Functional Skills  Strong experience in AI, Machine Learning, and Applied Data Science  Hands on expertise in LLMs / Generative AI / NLP / Deep Learning / Predictive Analytics  Experience in designing and deploying AI solutions on cloud platforms (Azure preferred)  Solid understanding of MLOps, model lifecycle management, monitoring, and governance  Experience with Agentic AI architectures and end to end AI solution design  Knowledge of Responsible AI, data privacy, security, and compliance  Ability to rapidly build prototypes / PoCs and demonstrate business value  Preferred industry exposure: Manufacturing, Supply Chain, Retail (nice to have)  Certifications preferred: o Azure AI Engineer o Azure Data Scientist o Equivalent AI / ML certifications Roles & Responsibilities • Engage with customers to identify AI opportunities and translate business problems into scalable AI solutions, • Lead AI discovery workshops, advisory sessions, and Proof of Concepts, • Architect end to end AI / Agentic AI solutions including:, • Data ingestion, • Model development & evaluation, • Deployment, monitoring, and governance, • Collaborate with Data Engineering, Cloud, Application Development, and Industry SMEs, • Provide AI thought leadership, best practices, and solution guidance, • Review AI solution architectures to ensure quality, scalability, and compliance, • Develop reusable AI assets, accelerators, and reference architectures, • Mentor and guide junior AI engineers and delivery teams, • Support AI capability scale up across manufacturing and cross industry portfolios Generic Managerial Skills, If any • Strong stakeholder management and customer engagement skills, • Ability to lead solution discussions with senior business and technology leaders, • Excellent communication, presentation, and storytelling skills, • Mentoring and technical leadership capabilities, • Problem solving mindset with rapid execution focus

We are seeking a highly skilled and experienced Vice President of Engineering to lead our engineering department specializing in deep drawn metal stamping. This executive role requires a comprehensive understanding of metal forming technologies, a strategic approach to driving innovation, and a proven ability to enhance operational efficiency within the manufacturing sector. The ideal candidate will possess exceptional leadership qualities, technical expertise, and a passion for producing high-quality metal components. Key Responsibilities: · Develop and implement engineering strategies that align with the company's vision and objectives, focusing on quality, efficiency, and profitability. · Build and maintain a strong engineering team by promoting a culture of innovation, collaboration, and accountability. · Provide expert guidance on the design, development, and optimization of deep drawn metal stamping processes, ensuring adherence to best practices and regulatory standards. · Evaluate and implement cutting-edge technology and software solutions to enhance product design and manufacturing processes. · Direct and oversee multiple engineering projects from initial concept through to production, ensuring timely delivery within budgetary constraints. · Utilize project management methodologies (e.g., Agile, PMBOK) to manage project metrics, risk assessment, and resource allocation effectively. · Conduct thorough analysis of existing metal stamping operations to identify inefficiencies, implement Six Sigma methodologies, and drive initiatives for process optimization. · Lead Kaizen events and root cause analysis to facilitate continuous improvement in quality, delivery, and cost-efficiency. · Recruit top engineering talent and foster a motivating work environment that encourages professional growth and development. · Serve as the primary technical contact for key customers, ensuring their requirements and specifications are understood and met with precision. · Develop strong relationships with clients to promote long-term partnerships and facilitate feedback-driven product development. · Develop, manage, and report on the engineering budget, ensuring all department expenditures align with strategic goals. · Identify and pursue cost-saving opportunities without compromising quality or performance. Qualifications: · Bachelor’s degree in Engineering (Mechanical, Industrial, or related field); a Master’s degree or MBA is preferred. · Minimum of 10 years of engineering experience, with at least 5 years in a senior leadership position within the metal stamping or manufacturing industry. · In-depth knowledge of deep drawn metal forming processes, materials science, and mechanical design principles. · Proven project management experience, with demonstrated ability to lead cross-functional teams. · Exceptional communication, negotiation, and interpersonal skills, capable of engaging with stakeholders at all levels. Preferred Skills: · Proficiency with CAD software (e.g., SolidWorks, AutoCAD) and simulation tools for metal forming analysis. · Familiarity with Lean Manufacturing techniques and Six Sigma certifications (Green Belt or Black Belt) is a plus. · Understanding of industry regulations and quality standards (ISO, TS16949) related to metal stamping manufacturing.

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, Monday - Friday, job stability, and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels. Diagnose control circuit failures using schematics and electrical prints. Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required) Verify proper operation of safety circuits, interlocks, E-stops, and guarding systems in accordance with OSHA and NFPA standards. Mechanical Systems: Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment. Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications. Fabricate or modify components as required to support repairs and equipment improvements. Steam & Boiler Systems: Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping. Support safe operation of boiler and thermal systems in compliance with applicable codes and permits. Identify steam-related inefficiencies and failures that impact production, safety, or energy usage. Plumbing, Hydraulics & Pneumatics: Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping. Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors. Identify pressure, flow, or contamination issues affecting equipment performance. Welding & Fabrication: Perform MIG/TIG/Stick welding to support equipment repair and improvements. Maintenance Systems & Documentation • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities. High School Diploma or GED 3 or more years mechanical maintenance experience in an industrial manufacturing environment. Demonstrated knowledge of mechanical equipment, troubleshooting & repair, and safe work practices. Experience working in production environment. Be able to read building and electrical schematics. Basic math skills along with excellent organizational and decision-making skills. Must be able to work independently and efficiently in an often fast-paced environment. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND1

Job Description: • We are seeking a highly skilled and motivated Engineering Manager to lead our deep drawn metal stamping operations., • This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards., • The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment., • Work Environment: The Engineering Manager will operate primarily in a manufacturing facility setting, which includes exposure to machinery and safety hazards. Safety measures and protocols must be strictly adhered to at all times. Responsibilities: • Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation., • Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity., • Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework., • Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year., • Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices., • Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence., • Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements., • Engage directly with clients on custom projects, translating technical specifications and ensuring final products consistently meet rigorous quality benchmarks., • Establish and continuously improve comprehensive quality control procedures and metrics, conducting periodic audits and assessments to ensure manufacturing processes adhere to ISO 9001 standards., • Develop and manage robust testing and inspection protocols, utilizing advanced measurement techniques (e.g., laser scanning, CMM) to guarantee product reliability and safety., • Prepare and manage departmental budgets, conducting cost analyses to identify potential savings and justify capital expenditures for process upgrades and equipment acquisitions while maintaining high-quality output., • Collaborate closely with suppliers and vendors to source high-quality materials and components, negotiating favorable terms and establishing long-term partnerships that benefit production efficiency and cost-effectiveness., • Ensure all manufacturing processes fully comply with industry regulations, ISO standards, and environmental guidelines. Maintain awareness of changes in regulations and anticipate their impact on production practices. Requirements: • Directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments., • Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis., • Strong problem-solving skills, with an analytical mindset and keen attention to detail, capable of addressing complex engineering challenges., • In-depth knowledge of ISO standards, industry best practices, and quality management systems applicable to manufacturing processes., • Excellent communication and interpersonal skills, with the ability to effectively convey complex technical information to various stakeholders. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master's degree or relevant certifications preferred).

Spectrum Chemical Job Title: Account Manager (Inside Sales) Department: Sales Reports To: Director of Sales Operations Work Location: New Brunswick, NJ or Gardena, CA (Hybrid eligible after initial onboarding) FLSA Status: Exempt Pay Range: $50,000- $70,000 base + commission eligibility SUMMARY The account manager will be responsible for increasing sales with existing customers, and for pursuing and establishing relationships with new customers. Responsible for building sales plans for the territory and achieving annual plans. ESSENTIAL DUTIES AND RESPONSIBILITIES • Manage assigned customer relationships within sales territory and creates sales plans to understand customer needs and offer solutions to maintain and grow business to monthly and quarterly sales plans and goals., • Presents products and services to current, former, and potential clients predominantly through phone, video conferencing, email, social media, and targeted tradeshows., • Develops account relationships with decision makers based on market and solution knowledge., • Able to qualify opportunities and work opportunities through sales process in CRM from discovery to close, • Prospects and follows up on leads to expand and convert existing and new customers at Spectrum., • Provide feedback to management on new products or emerging technologies based on assigned or potential accounts., • Provides support to customers by engaging with and working with internal departments such as production, shipping, accounting, and other internal departments to meet customer needs., • Provide concise customer updates to management in the form of weekly and monthly recaps/KPI’s., • Reviews and monitors sales, revenue, and service performance against plan, identify gaps and share best practices., • Ability to sell, negotiate, and close deals via phone and/or Video Meetings., • Ability to present capability presentations and website demonstrations to our customers., • Uses analytical tools available in Customer Relationship Management (CRM) software and Power BI to progress opportunities, review goal achievement, and capture account performance., • Attend trade shows as needed., • Support open territories where customers may not have a representative., • Complete other duties as assigned. REQUIREMENTS • Chemical and/or lab supply and equipment background, • Strong written and oral communication skills, • Independent problem solving /analytical skills, • Ability to work in a fast-paced and dynamic environment, • Highly motivated, goal-oriented individual possessing a demonstrated ability to produce results, • Ability to network and find correct contacts within an account, • Time and territory management skills, • Strong qualification and negotiation skills, • Ability to prioritize tasks and meet deadlines, • Positive attitude SUPERVISORY RESPONSIBILITIES: None QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • B.S. degree in the Sciences, Business Administration, • Previous industry related sales experience preferred, • Familiarity with how a laboratory functions and the laboratory chemicals and supplies are used, • Experience with manufacturing facilities and production of chemicals preferred, • Experience in using Microsoft office and experience in accessing ERP Sales data. Oracle, a plus LANGUAGE SKILLS Excellent written and oral communication skills. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, volume, and gross profit margin. REASONING ABILITY Strong problem-solving skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands, handle, or feel; and talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Senior Manufacturing Engineer – New Product Introduction Full Time/Direct Hire - (Onsite) Location: Somerset, NJ Salary range: DOE: $130,000 - $165,000 (DOE) + bonus Relocation assistance available for non-local candidates Visa sponsorship is available for candidates requiring visa transfer only. Our client develops advanced semiconductor capital equipment that powers the technologies shaping modern life—from smartphones and cloud computing to AI, AR/VR, and high‑performance communications. They're seeking a Senior Manufacturing Engineer to lead New Product Introduction (NPI) efforts and drive the seamless transition of complex, precision‑engineered systems from design into scalable, high‑quality production. Overview In this role, you’ll ensure manufacturability, mitigate early risks, and develop robust processes that support volume production. You’ll work cross‑functionally with design, test, and supply chain teams to optimize product readiness, improve manufacturing efficiency, and resolve technical challenges throughout the product lifecycle. Key Responsibilities Lead NPI activities from design through volume production, managing engineering changes, validating processes, and optimizing BOMs and assembly workflows. Collaborate with design, quality, supply chain, and production teams to ensure manufacturability, implement DFA/DFT best practices, and identify design risks early. Improve manufacturing processes and equipment, develop documentation for scalable builds, and support final test operations by troubleshooting mechanical, electrical, and controls issues with permanent corrective actions. Analyze and resolve technical problems using structured methods (Fishbone, 8D, SPC) and support new product launches at contract manufacturer sites. Qualifications • Bachelor’s in Manufacturing, Mechanical, or Industrial Engineering with 8+ years of experience, or Master’s with 6+ years, • Experience with process improvement methodologies, • Proven success transitioning products from design to manufacturing and volume production, • Background in complex equipment/product manufacturing, • Masters degree or MBA is highly preferred Skills & Abilities • Strong NPI leadership from concept through full‑scale production, • Experience with VisMockUp, Technomatix, Cameo/CATIA, Creo (plus), • SolidWorks, Tol Analyst, Design Check, interference analysis, • SAP experience (plus), • Understanding of system I/O, hardware/software/controls compatibility, • Schematic and wire harness design knowledge, • Vacuum (UHV) and cleanroom experience (highly desirable), • DFx, DFMEA, PFMEA expertise, • Ability to interpret complex technical documentation, • Semiconductor background (plus), • Lean Six Sigma certification (plus), • Willingness to travel up to 10%

We are a leading global manufacturer of electrical interconnects and power distribution solutions. Our North American Headquarters is located in Central New Jersey directly off Route 287 is where we maintain significant “on-time” inventory of electrical interconnects that are produced in our factory in Germany. In addition, we are a UL Listed assembly operation that manufactures portable power distribution, control panels, and power cable assemblies. Due to our rapid growth and expansion, we are currently seeking a dedicated and proactive Manufacturing Engineer II to join our team. The Manufacturing Engineer II plays a key role in supporting production and assembly operations. This position provides technical expertise related to system builds—including concept, prototype, pilot, first‑article, and full production builds. Manufacturing Engineer II contributes to product improvement, process optimization, cost reduction, and operational efficiency. This role also involves root cause analysis, design revision proposals, and accuracy audits for bills of materials and routing. Key Responsibilities: Production & Assembly Support • Provide technical support to production teams on assembly and manufacturing issues., • Assist in initial and subsequent builds of new systems, prototypes, and design concepts., • Prepare proposed design changes or revisions to improve product functionality or resolve issues., • Participate in Lean and Six Sigma initiatives including 5S, value stream mapping, and workflow optimization., • Continuously identify and implement cost‑reduction opportunities to improve assembly efficiency and finished product cost., • Research new manufacturing technologies and industry best practices, recommending improvements to current processes., • Review tooling and fixture requirements to enhance assembly processes and reduce inefficiencies., • Prepare documentation for design changes and revisions., • Collaborate with cross‑functional teams on product improvements and assembly methods., • Contribute to audits related to BOM accuracy, routing, and design validation. Qualifications: • Certified Mechanical, Manufacturing, or Industrial Engineer; or an equivalent combination of education and experience., • 3–5 years of experience in a manufacturing or assembly environment, preferably involving cable assembly, portable power distribution equipment, or control cabinet assembly., • Familiarity with Six Sigma, Lean manufacturing, 5S, and Just‑In‑Time (JIT) environments., • Ability to read and interpret engineering drawings and schematics., • Experience with AutoCAD and SolidWorks design software., • Strong communication and interpersonal skills, with experience working in a production setting., • Self‑motivated, with the ability to work independently and with minimal supervision. Annual Salary Range: $80,000-$90,000 Benefits include medical, dental, vision, life insurance, 401K, paid time off and car allowance.

Seeking Plant Manager for opportunity in Hillsborough, NJ (08844). Salary $175K-$195K plus 25% bonus. Strong preference for Spanish speaking/bilingual. Paid relocation. MUST COME FROM PLASTICS PACKAGING MANUFACTURING - rigid plastics preferred; flexible would also be ok. Join our high-performing team and lead our manufacturing operations to new heights. In this pivotal role, you will be responsible for the end-to-end management of our facility, overseeing production, material control, quality assurance, maintenance, and logistics. Your leadership will ensure that customer orders and our premium products are processed and delivered on schedule. With full P&L responsibility, you will also have the exciting opportunity to influence product development, establish quality benchmarks, and drive operational efficiency. Role and Responsibilities • Manage leadership team consisting of Production Manager, Quality Manager, Process Manager, Maintenance Manager, and Shipping Supervisor., • Assist with resource planning to include direct and indirect staffing as well as scheduling and material planning., • Effectively utilizing available resources to meet plans for customer stock and make and ship orders., • Monitor plant activities, assist with problems as necessary to meet planned production schedules and to ensure product quality standards are maintained., • Recommend and establish department organization, staff responsibilities and related authorities to meet planned objectives., • Troubleshoot and resolve unusual problems related to equipment, tooling, material and product designs., • Develop and implement operating methods and procedures to increase plant productivity., • Develop and implement reporting methods and systems to evaluate and control attainment of department objectives., • Evaluate and recommend equipment purchases to improve plant operations., • Work with other departments to assist with development of new products or product applications., • Ensure company conformance with governmental agency, OSHA and EPA regulations., • Responsible for developing and managing plant budget with full p/l responsibility., • Insure operation of the plant in compliance with ISO, GMP and state or federal requirements., • Drive OEE by monitor equipment and labor utilization., • Review production costs and modify production and inventory control programs to maintain and enhance plant profitable., • Communicate with and visit customers to ensure customer focus., • Approve all purchases for the plant., • Develop and submit capital expenditure requests to regional leadership., • Determine proper labor requirements and implement appropriate training programs., • Participate in seminars and trade shows, read trade literature and travel to other plants to gain best practices that may be implemented in the plant., • Working closely with human resource for activities and plant personnel., • Coordinate and conduct meetings (production, quality, maintenance, OSHA safety training, ISO, ASI and GMP practices, and customer complaints)., • Associates or Bachelor’s degree plus 7 to 10 years’ experience in a leadership role in a manufacturing environment preferably in the packaging/plastics industry, • Ability to simultaneously manage multiple projects, track progress and stay on schedule., • Intermediate/Advance in the following software is preferred: Word, Excel, and Oracle., • Strong planning and organizational skills., • Effective leadership skills, strong decision making skills, and ability to lead and drive teams., • Well organized, accurate and strong attention to detail., • Experience with Lean Manufacturing practices., • Leadership: Ability to inspire and lead a diverse team, fostering a collaborative and high-performance culture., • Strategic Thinking: Strong capability to develop and implement strategic plans that align with organizational objectives., • Problem-Solving: Excellent analytical skills to identify issues, evaluate options, and implement effective solutions promptly., • Communication: Outstanding verbal and written communication skills, with the ability to engage and influence stakeholders at all levels., • Financial Acumen: Proficiency in managing budgets, analyzing costs, and driving profitability initiatives., • Operational Excellence: Commitment to continuous improvement practices and Lean Manufacturing methodologies., • Project Management: Strong organizational skills with the ability to manage multiple priorities and deadlines., • Compliance and Safety Focus: In-depth understanding of industry regulations and a commitment to maintaining a safe work environment., • Customer Orientation: Strong focus on customer satisfaction, building relationships, and ensuring product quality., • Adaptability: Ability to thrive in a fast-paced environment and manage change effectively.

Prinston Pharmaceutical Inc. Company Overview Prinston Pharmaceutical, Inc. is a fast-growing U.S. generic pharmaceutical company focused on delivering high-quality, affordable medicines. The company combines operational stability with organizational agility to maximize cost efficiency in manufacturing and sourcing while maintaining strict compliance with financial and quality standards. Position Overview Prinston Pharma is seeking a Vice President of Finance to serve as a cornerstone of our leadership team. This high-impact role goes beyond traditional financial control, encompassing ownership of complex financial processes, driving digital transformation, and providing financial validation for business growth. The ideal candidate will translate operational complexity into clear financial insights, ensuring global manufacturing and sourcing operations are optimized for both profitability and compliance. Key Responsibilities Financial Leadership & Strategy: • Own the end-to-end Gross-to-Net (GTN) process, including chargebacks, rebates, and returns, ensuring revenue integrity., • Drive Product-Level P&L accountability, identify margin leakage, and implement cost improvement initiatives., • Manage corporate liquidity and capital allocation to fund R&D pipelines and manufacturing expansion. Systems & Data Transformation: • Lead ERP system optimization to integrate manufacturing, procurement, and finance processes., • Spearhead automation of financial workflows to reduce manual dependency and accelerate reporting., • Leverage BI tools to provide real-time insights on market pricing trends and operational variances. Business Development & Strategic Support: • Act as lead financial architect for M&A, product licensing, and asset acquisitions, building NPV/IRR models., • Manage the financial workstream for business development, assessing “Make vs. Buy” scenarios for new products., • Oversee financial onboarding of new assets to ensure rapid integration into reporting and compliance. Governance & Compliance: • Establish and maintain internal controls and corporate financial policies aligned with industry best practices., • Ensure compliance with U.S. and international regulatory requirements and maintain audit readiness. Qualifications • Education: Bachelor’s degree in Finance or Accounting; CPA and/or MBA highly preferred., • Experience: 12+ years of progressive finance leadership, with at least 6 years in the Pharmaceutical or Life Sciences industry (Generics experience strongly preferred)., • Industry Knowledge: Demonstrated practical understanding of pharma-specific accounting, including R&D costs, clinical accruals, and revenue recognition., • Mindset: A strategic "builder" who is comfortable operating in a lean, high-growth environment., • Location: Strong familiarity with the New Jersey business and regulatory environment. Compensation & Benefits: • Competitive base salary plus a performance-driven bonus. Detail will be discussed with qualified candidates. Location: NJ, USA Benefits: • 401(k), • Health insurance, • Dental insurance, • Paid time off, • Vision insurance Job Type: Full-time

Prinston Pharmaceutical Inc. About Us: Prinston Pharmaceutical, Inc. is a fully integrated pharmaceutical company engaged in product development, product registration, manufacturing, marketing, and sales of high-quality affordable generic prescription products to customers. We deliver and maintain high quality and integrity in all our products manufactured in world-class cGMP manufacturing facilities. Our highly experienced R&D team meets market needs through innovation rapidly, bringing cost-effective quality products to the US market and help patients get the best pharmaceutical products simultaneously reducing their medical cost. We currently have an immediate opening for a corporate paralegal at Prinston Pharmaceuticals Inc., located in Somerset, New Jersey. This is an excellent opportunity to work on meaningful projects and exposure to a corporate environment in global/international setting. Job Title: Paralegal Corporate Paralegal/Legal Assistant will work on a range of projects that will support the legal team. Roles and Responsibilities: Assist with reviewing, drafting and revising various contracts to support sales and marketing teams including CDAs, MSAs, SOWs, supply agreements, collaboration agreements, etc. • Prepare correspondence, reports, presentations, and other materials., • Perform legal research., • Review and monitor laws and regulations in relevant fields., • Maintain procedures, forms, and legal policy documents., • Assist with litigation and dispute resolution., • Manage Intellectual property portfolios., • Coordinate matters with Human Resources, as necessary., • Other duties may be assigned. Qualifications: • B.A with prior legal assistant/paralegal experience or currently enrolled in a J.D. program at an accredit academic institution, preferably second or third-year law student., • Extensive knowledge of corporate governance, intellectual property, employment litigation and Human Resources related law is required., • A corporate paralegal with prior experience at a pharmaceutical manufacturer., • Strong organizational, customer service, and project management skills., • Strong work ethic, positive attitude, and professional demeanor., • Ability to work independently and as part of a team., • Excellent verbal and written communication skills., • Must be eligible to work in the U.S. and able to start work immediately Benefits: • 401(k), • Health insurance, • Dental insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift, • Monday to Friday Job Type: Full-time Salary: $70,000 - $90,000 Location: Somerset, NJ (on-site)

Recommended Experience: 1-3 Years Job Type: Full Time Hourly Rate: $32 Job Description TMS International is the leading provider of on-site, industrial steel mill services for steelmakers around the world. At TMS, our people, services, technology and equipment provide invaluable resources that support and enhance our partners' entire manufacturing operations. Our services help lessen steelmakers' environmental impacts and contribute to a cleaner environment. The secret to our success is the expertise of our people and our commitment to unrivaled service. We hire the best people for the job, equip them with what they need, and empower them to do whatever it takes to get the job done right, including making decisions on the spot to create immediate value for our partners Pay: $31.85/hour Key Responsibilities: • Ability to work rotating - Nights and Weekends included., • Perform proper Preoperational inspection and write down findings., • Conduct regular maintenance on equipment before and after use such as cleaning windows, washing, and assisting with greasing., • Good radio and work communication with other employees., • Ensure equipment is safe and prepared for daily use., • Ability to work independently., • Maintain accurate and organized records as required., • Ability to pass a background check and drug test., • Reliable attendance required., • Health, dental, and vision insurance., • 401K, • Retirement plan, • Opportunities for professional development and training. TMS International is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or other characteristics protected by law. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off

Recommended Experience: 1-3 Years Job Type: Full Time Hourly Rate: $40-$43 Job Description TMS International, the leading provider of on-site, industrial steel mill services for steelmakers around the world. At TMS, our people, services, technology and equipment provide invaluable resources that support and enhance our partners' entire manufacturing operations. Our services help lessen steelmakers' environmental impacts and contribute to a cleaner environment. The secret to our success is the expertise of our people and our commitment to unrivaled service. We hire the best people for the job, equip them with what they need, and empower them to do whatever it takes to get the job done right, including making decisions on the spot to create immediate value for our partners We are looking for a Heavy Equipment Mechanic at our Sayreville, NJ location. Heavy Equipment Mechanic Key Responsibilities: • Perform routine maintenance and inspections on heavy equipment to identify potential issues., • Diagnose mechanical, electrical, and hydraulic problems and propose effective solutions., • Conduct repairs and overhaul components as necessary to ensure equipment reliability., • Test machinery and equipment to ensure proper functionality and performance., • Maintain accurate records of maintenance and repair work completed., • Adhere to company safety protocols and procedures at all times., • Collaborate effectively with other team members and departments to support project timelines., • Proven experience as a heavy equipment mechanic or similar role, preferably in the construction or heavy equipment industry., • Strong understanding of diesel engines, hydraulic systems, and electrical systems., • Proficiency in diagnostic tools and equipment., • Ability to read and interpret equipment manuals, schematics, and technical drawings., • Excellent problem-solving skills and attention to detail., • Good communication and interpersonal skills., • Certification from a vocational school or completion of an apprenticeship program is an asset., • $40.00 - $43.00 per hour based on experience, • Medical Insurance, • Paid Time Off and Holidays Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Paid time off

Recommended Experience: 1-3 Years Job Type: Full Time Hourly Rate: $26 Job Description TMS International is the leading provider of on-site, industrial steel mill services for steelmakers around the world. At TMS, our people, services, technology and equipment provide invaluable resources that support and enhance our partners' entire manufacturing operations. Our services help lessen steelmakers' environmental impacts and contribute to a cleaner environment. The secret to our success is the expertise of our people and our commitment to unrivaled service. We hire the best people for the job, equip them with what they need, and empower them to do whatever it takes to get the job done right, including making decisions on the spot to create immediate value for our partners Position Overview: The Compact Equipment Operator will be responsible for operating a variety of compact equipment, including Water Trucks, Skid Steers, Mini-Excavators, and Haul Trucks to ensure efficient and safe operation. The ideal candidate will have experience in construction or landscaping and a strong commitment to safety and teamwork. Schedule: 7am-3pm; Monday- Friday Key Responsibilities: • Operate Water Truck for dust control and site hydration., • Skillfully operate Skid Steer and Mini-Excavator for site preparation, material handling, and excavation., • Safely operate Haul Truck to transport materials to and from job sites., • Perform routine equipment inspections and maintenance to ensure optimal functionality., • Collaborate with site supervisors and other team members to execute project plans effectively., • Proven experience as a Compact Equipment Operator or similar role., • Valid driver's license and clean driving record., • Familiarity with safety standards and best practices, • Strong communication and teamwork skills., • Willingness to work outdoors in varying weather conditions., • Health, dental, and vision insurance., • 401K, • Retirement plan, • Opportunities for professional development and training. TMS International is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or other characteristics protected by law. Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Paid time off

Recommended Experience: 1-3 Years Job Type: Full Time Hourly Rate: $40-$43 Job Description TMS International, the leading provider of on-site, industrial steel mill services for steelmakers around the world. At TMS, our people, services, technology and equipment provide invaluable resources that support and enhance our partners' entire manufacturing operations. Our services help lessen steelmakers' environmental impacts and contribute to a cleaner environment. The secret to our success is the expertise of our people and our commitment to unrivaled service. We hire the best people for the job, equip them with what they need, and empower them to do whatever it takes to get the job done right, including making decisions on the spot to create immediate value for our partners We are looking for a Heavy Equipment Mechanic at our Sayreville, NJ location. Heavy Equipment Mechanic Key Responsibilities: • Perform routine maintenance and inspections on heavy equipment to identify potential issues., • Diagnose mechanical, electrical, and hydraulic problems and propose effective solutions., • Conduct repairs and overhaul components as necessary to ensure equipment reliability., • Test machinery and equipment to ensure proper functionality and performance., • Maintain accurate records of maintenance and repair work completed., • Adhere to company safety protocols and procedures at all times., • Proven experience as a heavy equipment mechanic or similar role, preferably in the construction or heavy equipment industry., • Strong understanding of diesel engines, hydraulic systems, and electrical systems., • Proficiency in diagnostic tools and equipment preferred., • Ability to read and interpret equipment manuals, schematics, and technical drawings., • Excellent problem-solving skills and attention to detail., • Good communication and interpersonal skills., • Certification from a vocational school or completion of an apprenticeship program is an asset., • $40.00-$43.00 per hour based on experience, • Medical Insurance, • Paid Time Off and Holidays Job Type: Full-time Benefits: • 401(k), • Health insurance, • Dental, • Vision, • Life insurance, • Day shift Application Question(s):

Job Description ___ Heavy Equipment Technician (Shop) Posting Start Date: 1/20/26 Job Location (Short): South Plainfield, New Jersey, USA, 7080 Requisition ID: 34530 Onsite or Remote: Join Komatsuand Be Part of Something Big Schedule: First Shift, Monday through Friday Hourly Pay: $42.06 Company Overview: At Komatsu, we lead the construction and heavy equipment industry with cutting-edge technology and innovative solutions that enhance efficiency, safety, and sustainability. Komatsu Company-Owned Dealer East operates eleven Company-Owned branch locations in the NJ, NY, PA, MD, and DE region. If you are a recent graduate of a Technical School or an experienced industry Technician, we would like to talk to you about a career with Komatsu. If you have experience maintaining and repairing construction equipment, cranes, diesel engines, on-highway truck and bus, marine and industrial equipment we would like to talk to you about transitioning your knowledge and experience through extensive training to work on Komatsu and the allied OEM products we represent. To learn more about___, visit our website! If you would like to hear what our employees think about working for Komatsu, click this link___. Why Join the Komatsu Company-Owned DealerEast Team: • Competitive Compensation, • Local 825Membership and Benefits, • Career Planning and Advancement, • Tool allowance to ensure you have the best equipment for the job, • Training Opportunities, • Expert diagnostic and repair experience with heavy equipment (construction, mining, material handling, paving, milling, etc.), • Ability to repair, rebuild, or replace engines and other major components, • Advanced knowledge of diesel engines and hydraulic, pneumatic, electrical, electronic, etc. systems, • Proactively use machine data, inspections and oil analysis to identify possible failure of components, • Work directly with Technical Communicator on complex repair and diagnostic issues, • Strong computer skills including Microsoft products as well as industry software, • Ability to read and write the English language, • Ability to convey repair details in clear and accurate service notes for assigned work orders, • Participation in writing customer quotes and delivery of best-in-class customer service, • Mentor less tenured mechanics in the branch operations, • Operation of heavy equipment, • Sitting, standing, climbing, walking, lifting, pulling and/or pushing, • Working at heights, • Carrying, grasping, reaching, stooping, bending, and crouching, • Must be able to lift/carry 50 pounds, • Hand/eye and motor coordination, • Work overtime as needed, • The workplace environmental conditions include subject to noise, heat, cold, odors, hazards, and atmospheric exposures Hiring Range At Komatsu, your base pay is one part of your total compensation package. This role pays $42.06. The actual offer will consider a wide range of factors, including experience and location. Diversity & Inclusion Commitment At Komatsu we come from diverse backgrounds, with unique perspectives, experiences, and contributions.We are committed to creating a workforce that is reflective of the communities we work and live in. We believe that our people are part of our shared purpose.We are authentic, ambitious, and innovative in our pursuit of Diversity & Inclusion.United, we are on a journey towards a sustainable future that creates value together. Company Information Komatsu is a world leader in manufacturing construction, mining, forestry, and industrial heavy equipment.Founded in 1921, Komatsu has a long history of quality, reliability, innovation, and excellence.Headquartered in Tokyo, Japan, Komatsu facilities, distributors and dealers are in more than 140 countries and employ more than 60,000 people.Komatsu offers a diverse and challenging work environment, where you can grow your skills and career, and contribute to a sustainable, clean-energy future.If you are looking for a company that values your talent and potential, be a part of something big and join a team that is shaping the world! #LI-CB1 If you want to learn more about Komatsu, please visit our website at ___

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma or GED required; technical training or vocational certification preferred., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Secur-Serv is a leading managed services provider of IT, print, and hardware services, with a security focus at the core of every service. Secur-Serv provides nationwide, on-site service to businesses of every size, focusing on the financial, manufacturing, transportation, and healthcare industries. Why Secur-Serv? Join Secur-Serv because we are committed to professional and personal growth, working with employees to develop a defined career path and helping them achieve their career goals with internal and external training. We empower our employees to innovate and be a part of solutions that improve processes, systems, and transformation. We recognize and provide an environment where each and every employee can make an impact.. • We have a generous benefits package for our regular full-time employees, which includes a copay medical plan option, HSA medical plans with employer contributions to your HSA Account, dental, vision, company-paid life insurance, and company-paid short- and long-term disability coverage., • Participate in our wellness program to improve your health and earn a discount on your health insurance premiums., • Explore new training opportunities through our LinkedIn Learning platform and partners to develop your skills and career. POSITION SUMMARY The Desktop Support Analyst will support a Secur-Serv's client by providing expert network and computer support to hospital staff. The role involves installing, maintaining, and troubleshooting hardware and software, as well as responding to user requests and collaborating with IT management. ESSENTIAL RESPONSIBILITIES • Follow all Secur-Serv requirements, policies, procedures, and management directions, • Provide expert network and computer support, assisting hospital staff with computer-related issues, installing, and maintaining hardware and software, monitoring network traffic, overseeing automatic backups, and analyzing and troubleshooting problems promptly., • Install, configure, and troubleshoot software applications, including Microsoft Office Suite and various productivity tools., • Provide remote desktop support using remote desktop tools and techniques to end users., • Support a range of software applications, including Windows Operating System, Novell Software, Microsoft Office Software, and other approved IT applications. Responds to inquiries about the software applications it supports and offers assistance. Contributes to the licensing of software products., • Provide timely solutions to user requests for assistance with personal computer hardware issues. Point users in the direction of the best course of action if problems are outside the IT department’s purview., • Keep thorough records of user assistance requests and periodically evaluate them to determine the need to improve education and training., • High School Diploma or GED, • Strong problem-solving skills and a passion for staying current with technology., • Basic understanding of networking concepts, including TCP/IP, DNS, DHCP, and Wi-Fi configuration., • Excellent communication and interpersonal skills to assist users effectively., • Proven ability to work collaboratively in a team environment., • Experience with Windows OS and Mac OS, including installation, configuration, and troubleshooting., • Proficiency in troubleshooting, repairing, and maintaining desktop hardware components, including CPUs, RAM, hard drives, and peripherals. PREFERRED SKILLS/EXPERIENCE • Relevant certifications such as CompTIA A+, Network+, or Microsoft Certified Professional (MCP), • Bachelor’s degree in business administration, cybersecurity, information technology, law, or a related field. PHYSICAL/MENTAL REQUIREMENTS • Sit Frequently at a desk, • Influenza Vaccine: Must be completed annually no later than December 1st annually, • COVID-19 Vaccination: Must have proof of vaccination and must be fully vaccinated to access the client site, • COVID-19 Booster Shot: Must have proof of booster shot (when eligible) to access the client site, • Frequent fine hand and finger movements (keyboard, writing, mouse movement), • Continual close visual acuity for reading, • Hearing and Speaking for communication within and outside of company., • May be required to lift/push/pull up to 10 pounds for set up/movement of office equipment,, • Mental Requirements – must be able to consistently:, • Learn new tasks,, • Remember Processes,, • Maintain focus,, • Complete tasks independently, • Make timely decisions in the context of a workflow,, • Ability to communicate effectively,, • Able to adhere to process protocol in a timely manner WE ARE AN EQUAL OPPORTUNITY EMPLOYER. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Applicants who have disabilities may request that accommodations be made in order to complete the selection process by contacting our People Department by emailing or calling 402.697.3039. EEO is the law. To review your rights under Equal Employment Opportunity please visit: . Secur-Serv Drug & Alcohol Use Policy Powered by JazzHR 2qfwWaEiTu

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ manufacturing plant operations management experience, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This is a hands‑on production role focused on supporting manufacturing operations through consistent execution of assigned tasks. The Operator works under direct supervision and is trained on specific equipment or processes such as CNC machining support, tacking, lamination, engraving, or card finishing. The ideal candidate is dependable, detail‑oriented, and eager to learn multiple functions to support daily production needs. Key Responsibilities: • Operate assigned production equipment or workstations following established procedures and work instructions., • Perform basic production tasks such as loading materials, monitoring equipment operation, and completing finishing steps., • Conduct visual inspections of parts to ensure quality standards are met and escalate defects or issues to the Supervisor., • Accurately complete required production and quality documentation using ERP tools or manual logs., • Follow all safety guidelines, policies, and standard operating procedures to maintain a safe and organized work environment., • Support flexibility by rotating between tasks or workstations as trained and assigned., • Communicate equipment issues, material shortages, or process concerns promptly to the Supervisor., • Participate in on‑the‑job training to build skills across manufacturing processes and equipment. Qualifications: • High School Diploma or GED required., • 1+ year of experience in a manufacturing, production, or industrial environment preferred., • Basic mechanical aptitude and willingness to learn manufacturing equipment and processes., • Ability to follow detailed instructions, standard work, and safety procedures., • Strong attention to detail and commitment to quality., • Reliable attendance and ability to work in a fast‑paced production environment., • Exposure to CNC machining, lamination, engraving, tacking, or finishing operations., • Familiarity with lean manufacturing concepts or continuous improvement practices., • Experience working in a regulated or quality‑driven manufacturing environment., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Leader to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Leader is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Leader is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We’re hiring a bilingual (English/Spanish) Operations Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all manufacturing site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Operations Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Operations Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Position Overview: This position oversees the management of all related areas of manufacturing to produce products and direct activities for cards and may include other related products. The responsibilities will be all approved products are manufactured on schedule, within the quality standards of the company and customer ensuring cost effective measures are implemented. Will ensure increased level of customer and employee satisfaction while improving efficiency of manpower, materials and equipment. The Production Manager will work onsite 5 days a week out of our office in Somerset, NJ from 6pm - 2:30am. Key Responsibilities: 1. Supervision • Assist senior staff members in the development and formulation of long and short-range planning, policies, programs and objectives., • Manages policy deployment in the areas of lean manufacturing techniques, quality, cost reduction, and on-time delivery., • Identifies, recommends and implements changes to improve productivity and reduce cost and scrap, monitor scrap and rework data. Directs the establishment, implementation and maintenance of production standards., • Hires, trains, develops and evaluates staff. Takes corrective action as necessary on a timely basis and in accordance with company policy. Ensures compliance with current federal, state and local regulations. Consults with Human Resources Department as appropriate., • Directs and monitors department supervisors to accomplish goals of the manufacturing plan consistent with established manufacturing and safety procedures., • Acts as a liaison between department supervisors and subordinate levels, as well as executive/department manager levels to inform personnel of communications, decisions, policies and all matters that affect performance, attitude and results., • Achieves optimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan., • Ensure efficient staffing and equipment utilization of all production equipment., • Ensure production schedule is adhered to and that operators are properly trained to perform their duties in a safe and efficient manner and in accordance with applicable quality standards., • Provides leadership for employee relations through effective communications, coaching, training and development. 2. Production • Responsible for all production of cards., • Ensure job work orders and production schedules are available and properly utilized by all production personnel., • Ensure all operating procedures are aligned with the company's safety and security programs. Maintain and promote safe practices and procedures. Other Important Responsibilities: • Develop an operator cross training program which optimizes labor availability and utilization., • Establish and maintain an operations dashboard of key performance indicators which provides the vehicle for department objectives and improvement initiatives such as process yield, on-time delivery, machine efficiency, etc., • Monitor production performance and make recommendations for improvement., • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 10 years (or more) of relevant experience, • Ability to relate to employees and understand their needs., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent time management skills., • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative., • Excellent problem solving skills., • Proficient in Microsoft Office Suite. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work as needed including the following:, • Sitting/standing as needed, • Computer skills required, • Telephone usage, • Must be able to sustain factory work for 8+ hours per day as required including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • For the most part, the position is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office environment., • Production floor exposure that require the use of personal protective equipment (PPE) ie: safety glasses, hearing protection, gloves etc., • This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machine. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Position Overview: This position is responsible for ensuring the accurate and timely execution of all prototype, small production, and R&D orders. Will direct shift leads, prototype operators within the group, and secures coordination with production and research engineers as necessary. This position will also ensure that any and all operational parameters and key production attributes are documented and the results summarized for distribution to the Chief Innovation Officer, Product Development Manager, Manufacturing Director, Quality Manager and Client Engineering Manager. Key Responsibilities: • Directs shift leads as well as team operators in the manufacture of prototypes, small production, and R&D orders., • Ensure that all production processes such as lamination, CNC operations, engraving, stamping, and chip embedding are completed by prototype operators as specified and that all equipment parameters, recipes, and key attributes are documented., • Coordinate operations between shifts to assure consistent quality and documentation, including directing leads on both shifts., • Assure that troubleshooting documentation is completed and communicated to relevant parties., • Commit to and meet delivery dates for prototype orders and confirm that scheduling database is maintained., • Immediate documentation and notification to the Product Development Manager on processing or quality issues and how they were resolved., • Ensure all employees are:, • Using the proper Personal Protection Equipment defined for use in their jobs, • Trained to perform their duties in a safe, productive and accurate manner, • Practicing safe working habits, • Reporting any and all accidents immediately, • Ensure department adherence to the Company's attendance, break, safety and other policies., • Conduct employee performance evaluations for team., • Oversee other operations within the responsibility of the Prototype Team., • Secure other operations under the management of production. Other Important Responsibilities: • Assist production when prototype orders are not present., • Timely Corrective Action response and resolution to relevant project situations., • Engage and support companywide Safety and Cleanliness programs., • Will be required to perform other job functions, as assigned. Qualifications: • Minimum 3 years of experience in a manufacturing environment involving prototype products, • High School Diploma or GED is required, • Excellent communication skills, both oral and written, • Strong attention to detail and ability to self-check own work, • Excellent problem-solving and time management skills, • Task oriented excellent organizational skills, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Accountability – Ability to accept responsibility and account for his/her actions, • Conceptual Thinking – Ability to think in terms of abstract ideas, • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Job Title: Tool Crib & Maintenance Shop Supervisor Location: New Brunswick, NJ Compensation: $75,000–$80,000 annually Schedule: On-site, full-time Position Overview We are seeking a hands-on Tool Crib and Maintenance Shop Supervisor to oversee daily operations of the maintenance tool crib and shop floor. This role is responsible for tool control, parts inventory, maintenance support, and coordination with maintenance technicians to ensure equipment uptime, safety, and operational efficiency in a fast-paced manufacturing environment. This is not a clipboard-only role. You will be in the shop, in the details, and accountable for keeping maintenance teams properly equipped and moving. Key Responsibilities • Oversee day-to-day operations of the tool crib and maintenance shop, • Manage inventory of tools, spare parts, and maintenance supplies, • Issue, track, and maintain tools and equipment to ensure accountability and availability, • Coordinate with maintenance technicians and supervisors to support preventive and corrective maintenance activities, • Maintain accurate inventory records and reorder points to prevent downtime, • Ensure proper storage, calibration, and condition of tools and equipment, • Support CMMS usage including parts tracking, work order support, and documentation, • Enforce safety standards, housekeeping, and 5S practices within the shop and tool crib, • Train and guide maintenance staff on tool crib procedures and best practices, • Partner with operations, safety, and leadership to support production goals Qualifications • Prior experience supervising a tool crib, maintenance shop, or similar operation in a manufacturing or industrial environment, • Strong working knowledge of mechanical, electrical, and maintenance tools and parts, • Inventory management experience, including cycle counts and reorder processes, • Comfortable working closely with maintenance technicians and leadership, • Experience with CMMS systems preferred, • Strong organizational skills with attention to detail, • Ability to lead by example in a hands-on, fast-paced environment, • Bilingual English/Spanish is a plus What’s Offered • Competitive salary in the $75k–$80k range, • Comprehensive benefits package including medical, dental, vision, life insurance, disability coverage, 401(k), FSA, and paid time off, • Opportunities for growth and development within a stable, expanding manufacturing environment, • Collaborative, operationally focused culture where execution matters

Engineering Manager Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: My client is a leading manufacturing company who is looking to add an Engineering Manager to their team. This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards. The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment. Why join us? Benefits: · Competitive salary with performance-linked bonuses. · Comprehensive health, dental, and vision benefits package. · 401(k) retirement plan with company matching contributions. · Opportunities for professional development and career advancement within a growing organization. · Flexible working environment that promotes work-life balance. Job Details Key Responsibilities: · Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation. · Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity. · Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework. · Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year. · Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices. · Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence. · Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master’s degree or relevant certifications preferred). · A minimum of 5 years of directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments. · Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics. · Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Family Law Attorney (Hybrid) - AV Top Rated Multi-Service Firm! This Jobot Job is hosted by: Jacob Vane Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $175,000 - $250,000 per year A bit about us: Based in San Jose, California, with offices in the Bay Area we are a top-ranked multi-service law firm. Our core values are centered around our people and our clients. We believe that putting our employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years, our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm. Some of these clients include those in the food and beverage, manufacturing, agriculture, real estate, and life sciences sectors, and many more! If you are an experienced Attorney, then please apply! Why join us? Do you want to work with some of the nation’s best clients AND enjoy time at home with family? We do too! • Meaningful Work!, • Best in Class Firm!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Is your background a fit? Apply if you meet this criterion: • Juris Doctor (JD) degree or similar, • Admission to the State Bar of California, • 4+ years of family law experience, • Proficiency in drafting discovery, motions, and associated legal documents Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Berendsen Territory Sales Representative – Fluid Power Components, Systems & Controls (PA/NJ) Berendsen is one of North America’s leading value-added distributors, providing custom-designed hydraulic, pneumatic, electrical and electronic solutions to Mobile and Industrial OEMs and End Users. We are seeking a high-energy Territory Sales Representative to manage and grow our presence across Eastern Pennsylvania and New Jersey. This is a "roll-up-your-sleeves" technical sales role focusing on providing total fluid power solutions—ranging from complex systems and power units to everyday hose and fitting components—to a diverse mix of small-to-mid-sized OEMs and large industrial end-users. The Territory • Coverage: Eastern Pennsylvania (Philadelphia/Lehigh Valley/Scranton) and all of New Jersey., • Needs-Driven Consulting: Uncover customer pain points and business priorities to deliver customized, value-added solutions., • Technical Problem Solving: Work directly with maintenance managers and engineers to spec out pumps, valves, cylinders, and hose assemblies., • Technical Literacy: Read and interpret hydraulic schematics to troubleshoot existing systems and identify where our components can improve performance or reliability., • Integrated Solutions: Leverage a general knowledge of electrical and control design to help customers integrate fluid power systems with PLC-driven environments and electronic controls., • Strategic Selling: Utilize a structured strategic selling methodology to manage complex, multi-stakeholder sales processes and create "win-win" partnerships. We believe in empowerment through support. We provide a robust technical backup team—including dedicated inside sales, application engineering, and product support—specifically designed to handle the administrative and deep-technical heavy lifting. This structure ensures you can spend 80% of your time in front of customers, doing what you do best: building relationships and closing deals. What You Need to Bring • Value-Based Sales Approach: Proven ability to build value in the eyes of prospects by positioning products as solutions to specific business challenges., • Team Collaboration: A collaborative mindset, working closely with our internal engineering and support teams to deliver a seamless customer experience., • Technical Proficiency: Demonstrated ability to read and understand hydraulic schematics and a working knowledge of electrical control circuits., • Time & Territory Management: Strong skills in planning your time and administrative tasks effectively to maintain a consistent presence across a large geographic area., • Educational Background: A Mechanical Engineering degree is a strong plus, as is an IFPS Certification (Hydraulic Specialist or Mechanic)., • Competitive base salary, incentive programs, car allowance, company-provided laptop and cell phone, • Comprehensive benefits package, including both a PPO and High-Deductible plan (with company matching HSA), • Unlimited flexible vacation plan, holidays and floating holidays, • Disability and Life Insurance, • Company matching 401(k) (50% up to 8%), • Tailored training and development programs

Job Description Job Location: Piscataway, NJ Position Type: ( Direct Hire) Education: • Bachelor's degree in engineering (Mechanical, Industrial, or related field); a Master's degree or MBA is preferred. Job Description: • We are seeking a highly skilled and experienced Vice President of Engineering to lead our engineering department specializing in deep drawn metal stamping., • This executive role requires a comprehensive understanding of metal forming technologies, a strategic approach to driving innovation, and a proven ability to enhance operational efficiency within the manufacturing sector., • The ideal candidate will possess exceptional leadership qualities, technical expertise, and a passion for producing high-quality metal components. Qualifications: • Minimum of 10 years of engineering experience, with at least 5 years in a senior leadership position within the metal stamping or manufacturing industry., • In-depth knowledge of deep drawn metal forming processes, materials science, and mechanical design principles., • Proven project management experience, with demonstrated ability to lead cross-functional teams., • Exceptional communication, negotiation, and interpersonal skills, capable of engaging with stakeholders at all levels. Preferred: • Proficiency with CAD software (e.g., SolidWorks, AutoCAD) and simulation tools for metal forming analysis., • Familiarity with Lean Manufacturing techniques and Six Sigma certifications (Green Belt or Black Belt) is a plus., • Understanding of industry regulations and quality standards (ISO, TS16949) related to metal stamping manufacturing. Responsibilities: • Develop and implement engineering strategies that align with the company's vision and objectives, focusing on quality, efficiency, and profitability., • Build and maintain a strong engineering team by promoting a culture of innovation, collaboration, and accountability., • Provide expert guidance on the design, development, and optimization of deep drawn metal stamping processes, ensuring adherence to best practices and regulatory standards., • Evaluate and implement cutting-edge technology and software solutions to enhance product design and manufacturing processes., • Direct and oversee multiple engineering projects from initial concept through to production, ensuring timely delivery within budgetary constraints., • Utilize project management methodologies (e.g., Agile, PMBOK) to manage project metrics, risk assessment, and resource allocation effectively., • Conduct thorough analysis of existing metal stamping operations to identify inefficiencies, implement Six Sigma methodologies, and drive initiatives for process optimization., • Lead Kaizen events and root cause analysis to facilitate continuous improvement in quality, delivery, and cost-efficiency., • Recruit top engineering talent and foster a motivating work environment that encourages professional growth and development., • Serve as the primary technical contact for key customers, ensuring their requirements and specifications are understood and met with precision., • Develop strong relationships with clients to promote long-term partnerships and facilitate feedback-driven product development., • Develop, manage, and report on the engineering budget, ensuring all department expenditures align with strategic goals., • Identify and pursue cost-saving opportunities without compromising quality or performance.Company DescriptionZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companiesZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companies

Job Description About CompoSecure: CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: The Engineering Technician plays a critical hands-on role in supporting manufacturing operations by partnering with Production and Engineering teams to maintain stable, efficient, and well-documented processes. This role supports yield improvement, defect reduction, and continuous improvement initiatives through data collection, root-cause analysis, documentation, and training support. The ideal candidate is detail-oriented, proactive, and comfortable working on the production floor while collaborating across departments to solve problems and improve process performance. Key Responsibilities: · Provide daily, order level support to production teams to ensure operational needs, quality standards, and delivery goals are met. · Act as a technical liaison between Engineering and Production to support troubleshooting, process clarification, and execution consistency. · Collect, analyze, and report defect and process data to support yield improvement and quality initiatives. · Assist with root cause analysis and corrective action implementation for process, equipment, or quality issues. · Support timely corrective action responses for assigned projects and production issues. · Support training of operators and technicians to ensure consistent process execution and adherence to standard work. · Assist Engineering with knowledge transfer during new equipment introductions or process changes. · Escalate unresolved process or equipment issues with clear data and recommendations. · Support Engineering Change Notices (ECNs) through documentation updates, training, and production rollout support. · Apply structured problem-solving methods to identify root causes and support sustainable corrective actions. · Analyze and troubleshoot production issues, recommending data‑driven improvements to process parameters and operating methods to improve yield and reduce waste. · Support engineering experiments and trials by monitoring processes, collecting and analyzing test data, and delivering clear test summary reports. Other Important Responsibilities: · Engage and support companywide safety and cleanliness programs · As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices · Will be required to perform other job functions, as assigned Qualifications: · Minimum 3 years of direct experience in industrial/manufacturing environment · High School or GED Diploma required, Technical School Certification/Degree Preferred · Strong written and verbal communication skills with the ability to work effectively across teams. · High attention to detail with the ability to self-check work for accuracy. · Excellent organizational and time-management skills; ability to prioritize work in a fast-paced environment. · Ability to accept responsibility and account for his/her actions. · High level of computer literacy using MS Office Suite · Excellent problem-solving skills and conceptual thinking. · Experience supporting continuous improvement, Lean, or Six Sigma initiatives · Comfortable working on the production floor in a hands-on technical support roll CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Position Overview: We're looking for a Manager, Cybersecurity who can run our SOC operations, vulnerability management, DFIR, and security tool health - while also managing our MSSP/MDR partners, running red team engagements, and integrating cyber threat intelligence into daily operations. This is not a checkbox role. You'll be the frontline leader making sure our defenses are sharp, our partners deliver value, and our playbooks are battle-tested. The Cybersecurity Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • SOC & Security Operations, • Run day-to-day SOC ops (monitoring, alert triage, escalation), • Manage MSSP/MDR relationships - hold vendors accountable, ensure quality, and drive outcomes, • Ensure 24/7 coverage through smart playbook design and partner integration, • Vulnerability Management, • Own the vuln management lifecycle: scanning, prioritization, patching, reporting, • Work with IT/DevOps to ensure remediation sticks, not just tickets get closed, • Report enterprise risk posture and trendlines directly to leadership, • Threat Intel & Red Teaming, • Lead coordination of red team and purple team exercises to test resilience and validate controls, • Integrate Cyber Threat Intelligence (CTI) into SOC processes - from IOCs to TTPs, • Run threat hunting campaigns based on MITRE ATT&CK and emerging intel, • Security Tooling & AI/ML, • Deploy and maintain enterprise tools (SIEM, EDR, WAF, scanners, SOAR, etc.), • Ensure tools are tuned, integrated, and delivering value - not shelfware, • Explore AI/ML anomaly detection and automation opportunities to stay ahead of threats, • Digital Forensics & Incident Response (DFIR), • Lead investigations end-to-end - endpoints, servers, cloud, and OT/ICS when needed, • Run tabletops, refine playbooks, and ensure incident readiness, • Mentor analysts in forensics, hunting, and response, • Team Development & Coaching, • Lead the professional growth of SOC analysts and cybersecurity team members through regular coaching, feedback, and development plans. Foster a culture of continuous learning and skill advancement., • Empower team members to take ownership of key initiatives, encouraging autonomy and accountability in daily operations and incident response. Qualifications: • Required, • A minimum of 7 years (or more) in cybersecurity ops, with 3+ in a lead or senior role, • SOC management and vendor/MSSP oversight experience, • Proven vulnerability management success across hybrid environments, • Hands-on with SIEM, EDR, • Solid DFIR skillset: log/memory/packet forensics, endpoint investigations, hunt operations, • Experience coordinating red team engagements and actioning results, • Strong communicator: can brief execs and mentor juniors, • Preferred, • Threat intel analysis and integration experience, • Cloud security ops in AWS/Azure, • Certifications: GCIA, GCFA, GCIH, CISSP, CISM, • Financial services or manufacturing sector experience About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description JOB SUMMARY The Employee Health & Safety Supervisor will lead the development, implementation, and continuous improvement of workplace health and safety programs across our operations. This role is critical in supporting our growth by building scalable safety systems, fostering a strong safety culture, and ensuring compliance with all applicable regulations. ESSENTIAL DUTIES & RESPONSIBILITIES · Develop, implement, and oversee employee health and safety programs that scale with company growth. · Foster a proactive safety culture by training, coaching, and empowering employees at all levels · Partner with cross-functional teams to embed safety into daily practices. · Collect, track, and analyze safety metrics to identify trends and drive continuous improvement · Lead incident investigations, root cause analyses, and corrective action planning. · Maintain compliance with OSHA and other relevant regulatory standards. · Support the development of policies and procedures that align with a growing, fast-paced operation. · Act as the point of contact for safety audits, inspections, and regulatory agencies QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE SKILLS AND ABILITIES · Strong knowledge of OSHA regulations and best practices in workplace health and safety. · Excellent communication and interpersonal skills with the ability to influence at all levels. EDUCATION AND/OR EXPERIENCE · Bachelor’s degree in Occupational Health & Safety, Environmental Science, or related field (or equivalent experience). · 3–5 years of health and safety experience, preferably within manufacturing, food production, or CPG. · Experience in scaling safety programs during periods of rapid company growth. · Proven ability to balance compliance requirements with practical, business-focused solutions. TRAVEL REQUIREMENTS ☒No Travel ☐Light Travel (0 – 10%) ☐Moderate Travel (10% - 30%) ☐Heavy Travel (greater than 30%) PHYSICAL DEMANDS ☐Sedentary - Lifting up to 10 pounds maximum and occasionally lifting and/or carrying such articles as dockets, ledgers, and files. Walking and standing are required only occasionally. ☐Light - Lifting 20 pounds maximum with frequent lifting and/or carrying objects weighing up to 10 pounds. Walking or standing to a significant degree, involves sitting most of the time with a degree of pushing and pulling. ☒Medium - Lifting 50 pounds maximum with frequent lifting and/or carrying objects weighing up to 25 pounds. ☐Heavy - Lifting 100 pounds maximum with frequent lifting and/or carrying objects weighing up to 50 pounds. WORK ENVIORNMENT ☐ Limited - General office environment infrequently exposed to extreme atmospheric conditions (temperature, noise, fumes, dust, etc.) ☐ Moderate - Occasionally exposed to extreme atmospheric conditions (temperature, noise fumes, dust, etc.) ☒ High - Frequently exposed to extreme atmospheric conditions (temperature, noise fumes, dust, etc.) Company DescriptionNJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.NJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.

Job DescriptionScismic is supporting the growth of the most respected legacies in American industry, known for pioneering breakthroughs in optical technologies! With a proven history of industry firsts—including application-specific fibers, optical connectors, ribbon cables, erbium-doped fibers, Raman fiber lasers, and fiber gratings - Company is commited to delivering cutting-edge optical innovations and solutions by designing, manufacturing and supplying the high performance optical fibers, fiber cable and components and devices. Their mission is to advance communication technology while providing exceptional service that drives value for customers, employees, and shareholders. We seek a highly motivated and skilled Preform Assembly R&D Engineer to support the company’s optical fiber program in Somerset, NJ. Core focus includes - Stack and assemble glass preforms, operate latches, and maintain cleanliness in a cleanroom manufacturing process. The role offers the opportunity to advance optical fiber processing technology and have a significant impact on new product innovation. The ideal candidates will be responsible for equipment and process design and troubleshooting, and innovate in optical fiber fabrication techniques in collaboration with cross-functional teams at multiple locations. In this role, the candidates will support R&D programs to advance optical fiber science and technology for programs serving the medical, aerospace, and telecommunications industries. Essential Duties and Responsibilities include, but are not limited to: • Be a critical asset in leading an R&D program to advance optical fiber technology, including overseeing and contributing to development and innovation in optical fiber fabrication to improve performance, quality, reliability, and scalability., • Investigate the relationship between process parameters, fiber properties, and manufacturing outcomes, and guide technicians and engineers in conducting process trials and experiments to achieve project milestones., • Fabricate and characterize optical fibers to meet performance specifications and project requirements., • Conduct research, propose experiments, and analyze data to validate hypotheses and improve process understanding, particularly for troubleshooting fiber performance and quality as well as equipment and materials issues., • Manage, maintain, and upgrade mechanical and electronic facilities for optical fiber fabrication and testing, including automation, data logging, and fabrication records., • Collaborate with project teams to design and develop fabrication processes and facilities for fiber fabrication, particularly for novel fibers., • Stay informed of, and contribute to, advancements in fiber draw technology and integrate best practices in collaboration with global R&D, manufacturing, and engineering teams., • Communicate and document research findings through detailed technical reports and presentations., • Be a strong team player with openness and willingness to contribute toward group goals and achievements., • Perform other related duties as required to meet project and organizational needs.Key Qualifications:, • Key qualifications:, • Preform Assembly – 2+ years of experience in a materials, mechanical, or manufacturing role. Ability to perform precision assembly work in a cleanroom environment., • General requirement:, • Master’s (MSc) or Ph.D. in Physics, Mechanical or Chemical Engineering, Materials Science, or a similarly related field., • Proven expertise in developing and optimizing manufacturing processes, preferably in optical fiber or similar manufacturing., • Experience in designing, analyzing and reporting experiments for complex process systems.Knowledge and Experience Requirements:, • Proficiency in data analysis, experimental design, and process optimization methods., • Understanding of high-temperature processes related to glass properties and material flow is an advantage., • Experience with fiber characterization techniques, including optical and mechanical property measurements., • Analytical and problem-solving skills to address complex process challenges and defects., • Leadership skills to guide technical teams and mentor junior staff effectively., • Collaboration skills to work with cross-functional teams and global partners., • Excellent technical writing and presentation skills for communicating research findings and process updates., • Strong organizational skills to manage multiple projects and prioritize tasks effectively., • Adaptability to work independently while supporting team objectives in a dynamic environment., • Passion for innovation and a strong drive to advance fiber draw processes and technologies.General Expectations:, • Demonstrate effective communications (verbal, written) skillsProficient with MS Office Word and Excel, • Maintain discretion when working with confidential and proprietary information, • Strict adherence to Company safety policies and procedures, • Conform to all aspects of Company’ “Standards of Conduct” documentWorking at the company means having the opportunity to realize ideas, experience innovation and discover new solutions for the future. The company offers:, • Dynamic work environment, • Competitive salaries (100K - 140K Commensurate with experience), • Generous benefits programs, including medical, dental, tuition reimbursement, • Matching 401(k) planEmployees are expected to serve as role models for safe work practices and behaviors. This includes following established health and safety policies and procedures, maintaining a clean, organized work area, wearing, and properly storing all personal protective equipment (PPE), and actively engaging as a safety conscious worker with personal safety and wellness as a priority.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are pd of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Director of Parts Logistics and Operations, Customer Support (the "Director") is a high-visibility, high-impact leadership role. The Director is responsible for overseeing and optimizing the parts logistics operations to ensure the efficient procurement, storage, distribution, and management of parts and components within the organization. This role involves coordinating with suppliers, managing inventory, and leading a team to ensure the timely availability of parts while maintaining cost-effectiveness and high-quality standards. Reporting to the Vice President and General Manager of the Customer Support division for North America, the Director works in a globally matrixed organization overseeing critical regional functions/deliverables across our business segments. The Director also leads Spare Parts Specialists who own the customer relationship from a spare parts perspective and proactively engage customers to increase spare parts sales. The role reports to the Vice President and General Manager of Customer Support. Key Responsibilities: • Develop and implement logistics strategies for the procurement, storage, and distribution of parts and components., • Oversee the coordination of suppliers and vendors to ensure timely delivery of parts and adherence to quality standards., • Oversee the transportation and distribution of parts to various locations, including warehouses and end-users., • Manage inventory levels to ensure optimal stock levels are maintained, reducing both excess inventory and stockouts., • Implement inventory control procedures and best practices to minimize loss and maximize accuracy., • Conduct regular inventory audits and reconciliation., • Oversee warehouse operations as part of overall logistics and operational responsibilities., • Lead and mentor a team of logistics and warehouse staff, providing training and support to ensure efficient and effective operations., • Develop and implement performance metrics and goals for team members, conducting regular performance reviews., • Identify and implement process improvements to enhance efficiency, reduce costs, and improve service levels., • Utilize data analysis to monitor logistics performance, identify trends, and make data-driven decisions., • Ensure compliance with safety regulations and company policies., • Establish and maintain strong relationships with suppliers and vendors to negotiate favorable terms and resolve issues., • Monitor supplier performance/quality, addressing any issues related to delivery, quality, or cost., • Develop and manage the budget for parts logistics operations, including forecasting and controlling expenses., • Analyze financial reports and metrics to ensure budget adherence and cost-effectiveness., • Ensure timely and accurate fulfilment of parts orders to meet customer requirements and expectations., • Address and resolve any issues related to parts delivery, quality, or discrepancies., • Ensure compliance with all relevant regulations and industry standards, including safety, environmental, and quality regulations., • Prepare and present regular reports on logistics performance, inventory levels, and other key metrics to senior management., • Customer-facing spare parts ownership and sales growth, • Lead and manage Spare Parts Specialists who own customer relationships for spare parts and drive proactive engagement to increase spare parts sales., • Establish a customer coverage model and engagement cadence for Spare Parts Specialists (account plans, installed-base reviews, critical spares recommendations, and obsolescence risk mitigation)., • Set targets and performance expectations for Spare Parts Specialists (sales goals, activity metrics, pipeline discipline). Inspect performance routinely and coach to outcomes. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications • 10–15+ years in supply chain, logistics, operations, or aftermarket support, • 5–7+ years in senior leadership managing global or multi-site operations, • End-to-end spare parts lifecycle management (forecasting, procurement, warehousing, distribution), • Commitment to customer satisfaction, • Optimization of fill rate, inventory turns, service levels, and obsolescenc, • Reverse logistics, repairs, refurbishment, and warranty returns, • New product introduction (NPI) readiness for service and spares, • Proven experience with spare parts planning & distribution, aftermarket / customer support operations, service-level agreement (SLA) management., • Ability to lead and develop current team, • Experience with budget ownership, • Strong decision-making under pressure, • Customer-centric mindset with operational rigor, • Ability to balance cost, speed, and service quality, • Commercial leadership for spares, • Experience leading customer-facing teams with accountability for spare parts sales growth., • Ability to build and execute proactive spare parts growth plans across a defined customer base. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionAbout UsWe are a rapidly growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. As we expand into a new facility, we’re hiring a hands-on Electrical & Mechanical Technician who can keep production running by physically troubleshooting, repairing, and maintaining machines on the floor. This is a full-time, first-shift role (7:30 AM–around 5:00 PM). This position is for someone who’s most comfortable with tools in hand and panels open—tracking down failures, replacing components, rebuilding assemblies, and getting equipment back online quickly and safely. You’ll work on conveyors, motors, pumps, sensors, pneumatics, and automated equipment, and you’ll also handle electrical troubleshooting across 120V/208V/240V/480V systems. PLC/VFD familiarity is important, but the core need is a technician who can fix what’s broken and prevent it from breaking again. Electrical license/certification is a plus. Job SummaryWe’re seeking an experienced Electrical & Mechanical Technician to support day-to-day production by diagnosing issues, repairing equipment, and performing preventive maintenance. You will be the person who responds when a line is down—locating the fault, repairing or replacing the failed part, verifying safe operation, and documenting the fix. You’ll work closely with operations and maintenance to improve reliability, reduce downtime, and keep equipment operating safely and consistently in a food manufacturing environment. The ideal candidate is practical, calm under pressure, and confident working independently on mechanical and electrical repairs in a fast-paced facility. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Systems Engineer, based in Somerset, NJ, is a multifaceted role requiring an in-depth understanding of BEUMER sortation products and applications. This position is responsible for analyzing customer requirements, developing innovative solutions, estimating costs, overseeing the development of layouts using 2D and 3D CAD and delivering customer proposals. Additionally, the Systems Engineer acting in the capacity of subject matter expert, collaborates with Sales, Engineering, and Software/Controls to ensure the successful design of solutions that address customer requirements. The Systems Engineer is also responsible for participating in and leading client meetings, calls and workshops serving in the capacity of a technical expert. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER's Logistics products, solutions and applications., • Lead and engage in initiatives that require expertise to address customer requirements through innovative solutions., • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Develop innovative solutions using 2D and 3D CAD., • Collaborate with Sales, Engineering, and Software/Controls departments to design and develop effective system solutions., • Serve as the primary point of contact (acting as a subject matter expert) for customers, providing pre-sales and post-sales consulting on technical topics., • Develop and estimate cost associated with system design and solutions., • Coordinate in developing RFPs and manage vendor responses to RFPs., • Develop tools and assist in processes development as needed., • Participate, lead and coordinate client meetings, workshops and calls as necessary., • Coordinate with Sales, Systems Engineering, Operations and Finance to handover orders. Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 4-6 years of experience in systems engineering, technical sales or product engineering; preferably in convey and sortation solutions., • High motivation, drive and initiative to get things done with little to no supervision., • Team player and ability to work well with large team setups including internation cultures., • Strong time management, organization and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge., • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 15-20% on average. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. 2025, Eurofins generated total revenues of EUR € 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The FSE I/II performs Calibrations/Qualifications, Preventative Maintenance and Repairs on pipettes and various types of small laboratory instrumentation. Responsibilities • Perform calibration/qualification and preventative maintenance in the lab on single channel and multi-channel pipettes., • If required, travel to customer sites to perform pipette calibrations and PM’s as necessary., • Perform troubleshooting and repair of various types of small laboratory equipment both in the field and in the lab., • Manage personal parts inventory effectively., • Provide feedback to Manager regarding any issue impacting service delivery, particularly issues impacting turnaround times., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management.Qualifications, • Two- or four-year degree in a related science field (e.g., chemistry, analytical chemistry, electronic engineering, biotechnology, or similar) plus 0-1 years (FSE I) or 1 to 3 years (FSE II) experience in a related field, preferably as a Field Service Technician, • Ability to work in the US without immediate or potential future sponsorship, • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Clear, respectful, and timely verbal and written communication, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Occasional travel as required Additional Information Position is a Full-Time Monday-Friday, 8am-5pm, with additional hours as needed. Candidates within commutable distance to North Brunswick, NJ are encouraged to apply. Compensation: $28-$30/hr Excellent full time benefits including • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Senior Service Operations Manager leads and optimizes end-to-end service operations to ensure high service quality, operational efficiency, and a strong customer experience. This role owns the operating backbone for Customer Support, spanning Hotline, Business and Project Coordination, Contract Management, Asset Management, and Bid Management. This role sets standards, drives execution discipline, and ensures consistent outcomes across the service lifecycle. The role operates in a globally matrixed organization and reports to Customer Support leadership for North America. Core Accountabilities: • Run a single operating system for service execution across the covered functions., • Ensure SLA performance, escalation control, and customer communication discipline., • Drive standard work, reporting, and continuous improvement using data. Service operations ownership • Lead end-to-end service operations across Hotline, Business and Project Coordination, Contract Management, Asset Management, and Bid Management., • Own SLA performance, response times, and escalation standards., • Own case intake, triage rules, prioritization, and resolution quality., • Own contract compliance, scope control, and change order discipline., • Own proposal process governance, templates, scope language, and approvals., • Own KPI framework and targets (MTTR, backlog, OTIF, utilization, warranty cost, service margin, customer satisfaction)., • Standardize workflows, documentation, and best practices across sites and segments., • Partner with Parts, Supply Chain, Engineering, Quality, Finance, and Sales to remove friction and improve service outcomes., • Drive consistent use of ERP, FSM, CRM, and reporting tools., • Lead and develop functional leads and support teams. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Education • Bachelor's degree in Operations, Engineering, Business, or related field, • 8 to 12+ years in service operations, customer support, or operational leadership, • 3 to 5+ years managing teams in a senior operations role, • Strong understanding of service operations KPIs and performance management, • Proven leadership and people management capability, • Strong problem-solving and decision-making skills, • Strong communication and stakeholder management, • Experience with ERP, FSM, and CRM systems (SAP, Oracle, ServiceNow, Salesforce), • Up to 25% as required Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Professional Manage and develop strategic plans for major projects, lead strategic negotiations and provide support/guidance for sourcing activities of Supply Services to stakeholders, including but not limited to Facility, MRO, Capital, Manufacturing & R&D supplies, Key Accountabilities: Follow the Global Procurement governance in all projects, adhering to GPPM (Global Procurement Policy Manual). Follow the CRMC (Contract Risk Management Committee) process. Keep close contact and develop strong partnerships with category stakeholders to better understand the business needs. Engage senior leaders when there is a need to escalate any issues. Manage ethical and professional relationships with vendors. Support global and regional initiatives identified in the annual goal alignment. Support procurement risk assessment and risk mitigation plans. Quickly support spot requests from the Divisional or Global organizations. Keep a proactive and dynamic attitude, quickly adopt the companys new ways of working and FEED principles (Focus, Empowered, Experimental, Digital). Support to Global E2E Supply & Services Procurement: Apply strategic sourcing principles and directly lead/manage procurement projects and special projects included but not limited to constructions and renovations Lead global contract negotiations, and track the effective contract execution and management in the assigned categories; making sure contracts are uploaded in the Ariba contract repository by the responsible party Support Tactical and Strategic sourcing initiatives Prepare tactical specifications, issue bid requests and review quotations Build and Lead RFPs (Request for Proposals) and RFQs (Request for Quotes) Support the development of Capital Strategy by providing data analytic/insights and implementation of strategy when Global implementation is required Support relevant IP transformational/reimagined initiative Achieve or exceed the savings and simplification goals. Support development of global strategy and long-range plans for the categories under responsibility. Actively engage the global IP network , keeping them aligned, sharing best practices, tracking top projects, enforcing the category governance, and escalation processes. Engage frequently and effectively with key corporate stakeholders in E2E Supply Chain organization and be aware of key stakeholder strategies to ensure alignment in strategy execution Lead SRM (Supplier Relationship Management) programs and initiatives when assigned Lead QBRs (Quarterly Business Review) programs for Essential Suppliers, and initiatives as assigned. Support the Global Procurement Digital Transformation Support spends analysis and apply spend analytics best practices for the categories under responsibility, by sub-category/geographical regions/supplier, as a base to develop category strategies. Do frequent deep dives in the assigned categories. Support the CBS/POC processes to continue maximizing the effectiveness of this team, i.e. vendor creation, improvement with supplier payments. Gain industry knowledge of best practices, processes, and technology trends to proactively support reporting and insights for category strategy. Input data into sourcing databases Track Global sourcing KPIs and report them to the Global E2E Services & Supply Manager Monitor P2P process to ensure compliance with agreed payment terms Required Skills: Strong Project Management skills for Construction projects and Real Estate Strong Business Analysis. Using business tools and information systems when solving problems and making decisions. Using data to support recommendations. Strategic mindset - Understanding the difference between total value vs. cost saving when making decisions Negotiation skills. Planning and anticipation, demonstrates professionalism in all business settings and shows ability to control emotions, mannerisms, and communication style. Teamwork and Relationship building. Being a team player when interacting with stakeholders and peers. Able to manage relationships at all levels of the organization Collaborative engagement with stakeholders. Project management skills. Setting Priorities Ability to work cross functional and cross regional. Procurement Experience (FMCG) Required Qualifications A minimum of a Bachelor of Arts or Science (or equivalent local university degree) in Supply Chain, Sourcing, Engineering, or comparable discipline is required. A minimum of 6 (six) years of experience working within the Supply Chain, Engineering, and/or a manufacturing facility. Strong Business Analysis- Utilizing digital tools when solving problems and making decisions. Analyze data to support recommendations. Proficient in Microsoft and Google tools.

Job DescriptionDescription: We are actively seeking a dynamic and strategically-minded Director of Operations to oversee our deep drawn metal stamping manufacturing facilities. In this pivotal leadership role, you will be responsible for not only driving operational excellence but also developing comprehensive strategies to ensure the highest quality standards, optimize production processes, and significantly enhance operational efficiency across all manufacturing operations. Requirements: Key Responsibilities: · Develop and execute long-term operational strategies that align with company goals and promote sustainable growth within the deep drawn metal stamping sector. This includes analyzing market trends and competitor strategies to identify opportunities for expansion and innovation. · Lead the overall management of manufacturing operations, which encompasses production planning, quality control, supply chain management, and workforce development. Ensure efficient utilization of resources and materials to meet production goals effectively. · Establish and continuously monitor key performance indicators (KPIs) to evaluate production efficiency and product quality. Utilize advanced data analytics tools to make informed, data-driven decisions that enhance operational performance and drive improvements in production yields and quality compliance. · Collaborate with senior management and cross-functional teams to spearhead continuous improvement initiatives, such as implementing lean manufacturing practices, Six Sigma methodologies, and other process optimization strategies to streamline operations and reduce waste. · Ensure strict compliance with industry regulations, safety standards, and quality assurance protocols. Foster a culture of safety and accountability by conducting regular safety audits and promoting best practices. · Mentor and empower the leadership team within manufacturing, providing them with the tools and resources needed to take ownership of their departments. Facilitate leadership development programs and training to enhance team skills and foster career growth among employees. · Oversee the preparation and management of operational budgets, effectively allocating resources to maximize productivity while maintaining cost-effective operations. Regularly review financial performance and implement corrective actions as necessary. · Cultivate and maintain strong relationships with suppliers, customers, and industry stakeholders to enhance collaboration and drive innovation in product development. Engage with partners to negotiate contracts and terms that support operational goals. Qualifications: · Bachelor’s degree in Engineering, Manufacturing Management, or a related field; a Master’s degree is highly preferred. · A minimum of 7-10 years of progressively responsible experience in manufacturing operations, specifically in deep drawn metal stamping or a closely related field, with a strong understanding of the complexities involved. · Proven leadership abilities with a track record of creating and sustaining high-performing teams, driving operational improvements, and managing large-scale manufacturing projects. · In-depth knowledge of manufacturing processes, quality management systems, and lean manufacturing methodologies that drive operational efficiency. · Excellent analytical, problem-solving, and decision-making skills, coupled with the ability to navigate and resolve complex operational challenges in a fast-paced environment. Benefits Offered: · A competitive salary with performance-based incentives, recognizing your contributions to the company’s success. · A comprehensive benefits package, including health, dental, vision, and retirement plans that prioritize your well-being. · Opportunities for professional growth and advancement within a dynamic and innovative company that values employee engagement, creativity, and input. Work Environment: This position will primarily operate in an office setting, with regular visits to the manufacturing floor to supervise operations and ensure alignment with strategic goals. Occasional travel may be required for client meetings, industry events, and inter-company collaboration. Application Process: Interested candidates should submit their resume and a tailored cover letter detailing their relevant experience and qualifications to . We look forward to reviewing your application and potentially welcoming you to our team!

Job DescriptionDescription: We are seeking a highly skilled and experienced Engineer Manager to lead our engineering department specializing in deep drawn metal stamping. This executive role requires a comprehensive understanding of metal forming technologies, a strategic approach to driving innovation, and a proven ability to enhance operational efficiency within the manufacturing sector. The ideal candidate will possess exceptional leadership qualities, technical expertise, and a passion for producing high-quality metal components. Requirements: Key Responsibilities: · Develop and implement engineering strategies that align with the company's vision and objectives, focusing on quality, efficiency, and profitability. · Build and maintain a strong engineering team by promoting a culture of innovation, collaboration, and accountability. · Provide expert guidance on the design, development, and optimization of deep drawn metal stamping processes, ensuring adherence to best practices and regulatory standards. · Evaluate and implement cutting-edge technology and software solutions to enhance product design and manufacturing processes. · Direct and oversee multiple engineering projects from initial concept through to production, ensuring timely delivery within budgetary constraints. · Utilize project management methodologies (e.g., Agile, PMBOK) to manage project metrics, risk assessment, and resource allocation effectively. · Conduct thorough analysis of existing metal stamping operations to identify inefficiencies, implement Six Sigma methodologies, and drive initiatives for process optimization. · Lead Kaizen events and root cause analysis to facilitate continuous improvement in quality, delivery, and cost-efficiency. · Recruit top engineering talent and foster a motivating work environment that encourages professional growth and development. · Serve as the primary technical contact for key customers, ensuring their requirements and specifications are understood and met with precision. · Develop strong relationships with clients to promote long-term partnerships and facilitate feedback-driven product development. · Develop, manage, and report on the engineering budget, ensuring all department expenditures align with strategic goals. · Identify and pursue cost-saving opportunities without compromising quality or performance. Qualifications: · Bachelor’s degree in Engineering (Mechanical, Industrial, or related field); a Master’s degree or MBA is preferred. · Minimum of 10 years of engineering experience, with at least 5 years in a senior leadership position within the metal stamping or manufacturing industry. · In-depth knowledge of deep drawn metal forming processes, materials science, and mechanical design principles. · Proven project management experience, with demonstrated ability to lead cross-functional teams. · Exceptional communication, negotiation, and interpersonal skills, capable of engaging with stakeholders at all levels. Preferred Skills: · Proficiency with CAD software (e.g., SolidWorks, AutoCAD) and simulation tools for metal forming analysis. · Familiarity with Lean Manufacturing techniques and Six Sigma certifications (Green Belt or Black Belt) is a plus. · Understanding of industry regulations and quality standards (ISO, TS16949) related to metal stamping manufacturing. Benefits: · Competitive salary with performance-linked bonuses. · Comprehensive health, dental, and vision benefits package. · 401(k) retirement plan with company matching contributions. · Opportunities for professional development and career advancement within a growing organization. · Flexible working environment that promotes work-life balance. If you are an innovative leader with a passion for engineering excellence in the deep drawn metal stamping sector, we invite you to join our team and contribute to shaping the future of our organization. Work Environment: This position will primarily be based in an office/Manufacturing Plant setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: We are seeking an Advanced Manufacturing Engineer (Automation) who will perform the planning, design, and implementation of automation solutions across our production lines. This role involves designing and building custom machines in-house as well as managing external integrators to deliver turnkey automation systems. The ideal candidate will have a proven track record in machine design, supplier management, and project execution in high-volume manufacturing environments. This position is critical to driving automation initiatives that improve efficiency, scalability, and quality in a multi-million-unit-per-year production setting. Key Responsibilities • Automation System Design & Implementation, • Design and develop custom automation equipment using SolidWorks., • Lead full lifecycle of automation projects: concept, design, build, installation, and validation., • Collaborate with external integrators and manage suppliers for outsourced machine builds., • Production Line Automation, • Plan and implement automation solutions for assembly and packaging lines., • Develop project timelines, budgets, and resource plans., • Ensure all automation systems comply with OSHA, environmental, and company safety standards., • Implement risk assessments, machine guarding, and lockout/tagout procedures., • Identify automation opportunities to reduce labor, improve throughput, and enhance quality. Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Experience: • 5+ years of hands-on experience in machine design and automation engineering., • SolidWorks proficiency for machine and fixture design., • Strong knowledge of automation technologies: robotics, PLC programming, vision systems, conveyors, and material handling., • Experience with supplier management and working with external integrators., • Understanding of system design, defect analysis, and process optimization., • Familiarity with SPC, Six Sigma, and DoE methodologies for data-driven improvements., • Experience designing full production lines., • Familiarity with high-speed automation for multi-million-unit production., • Knowledge of Lean Manufacturing principles., • Exposure to ISO 13485 or automotive quality standards., • Experience with robotic integration, automated quality inspection, and vision systems. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description We’re Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let’s help you with tuition reimbursement. Don’t know something? Let us send you to classes. Have you heard of DOMO? We’ll teach you that too! Come on in and we’ll show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. SUMMARY: We are looking for a Mechanical Engineer with an interest to create and develop new and/or improving current equipment to create a state-of-the-art manufacturing facility. Owning responsible for all phases of the project life cycle including concept generation, preliminary and detail design, analysis, assembly, and test as well as manufacturing support. This role works closely with engineering and manufacturing teams to qualify and execute design inputs, as well as manage external suppliers, vendors, sub-contractors, and internal resources within the company. DUTIES AND RESPONSIBILITIES:  Maintain the knowledge base which consists of, but is not limited to, processes, documentation, engineering change orders, bills of material, product tables and system logs. Create and evaluate the documentation used in production.  Provide technical assistance during the sales phase of the project, including providing estimates of hours for design efforts.  Designs to meet requirements, ensure requirements are satisfied, while balancing the constraints of time and money.  Answers technical questions and resolving technical problems regarding the design, operation, and reliability of the equipment. Working closely with mechanics to trouble-shoot major breakdowns  Responsible for the design of the equipment, or process, develop drawings and BOM.  Creates the design schedule, establishes milestones, and manages the design effort to ensure quality and timeliness of the completed design package.  Serves as the primary focal point for all technical communications with the customer and internal group.  Establishes and maintains a design baseline and manages change orders.  Responds to shop floor feedback regarding technical problems encountered or improvements suggested during manufacture. Manages the resolution/ improvement process.  Inspects incoming equipment; completes FAT prior to shipment; creates and maintains manuals for equipment and custom job orders.  Manage the transferring of 2D CAD system to 3D (SolidWorks); Maintains CAD and SolidWorks databases and ensure accurate and timely retrieval of all engineering data.  Creates a system to maximize standardization with the capability to effectively deviate from standard designs when necessary.  Designs and maintains a system to ensure the continuous improvement of the engineering function to establish the company as a leader in state-of-the-art technology within its product lines.  Establishes the policies and procedures for tasks within this role to be performed on a continuing basis. QUALIFICATIONS:  Experience with production / manufacturing equipment  Degree in Mechanical Engineering  Ability to design solutions to improve productivity  Strong knowledge of machine functionality and baselines  Ability to create machine manuals / operating guide lines Reviewed by Date: Approved by Date: HR Approved Date: Last Update Next Update  Establish perimeters / setting from test result on equipment  Preform IQ, OQ, including FAT’s for new equipment  Knowledge in specifying proper equipment for manufacturing process  Ability to complete projects on time and on budget  Ability to manage multiple projects with no decline in quality control  Excellent verbal and written communication skills  Experience with working with outside vendors with equipment design and build  Bilingual a plus COMPETENCIES:  Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.  Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.  Teamwork--Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.  Planning/Organizing--Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.  Innovation--Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. PHYSICAL REQUIREMENTS:  Standing  Walking  Sitting  Typing/Keyboarding  Light work under 50 lbs. lifting

Job Description Job Description: • We are seeking a highly skilled and motivated Engineering Manager to lead our deep drawn metal stamping operations., • This role is critical in driving innovation, optimizing production processes, and ensuring the highest product quality standards., • The ideal candidate will have a robust engineering background, extensive experience in metal forming processes, and proven leadership abilities to guide a dynamic team in a fast-paced manufacturing environment., • Work Environment: The Engineering Manager will operate primarily in a manufacturing facility setting, which includes exposure to machinery and safety hazards. Safety measures and protocols must be strictly adhered to at all times. Responsibilities: • Directly supervise and mentor a diverse team of engineers and technical staff, encouraging professional development and fostering a collaborative culture that promotes innovation., • Facilitate cross-departmental collaboration by working closely with production supervisors, quality assurance teams, and design engineers to streamline operations and enhance overall productivity., • Design, implement, and refine efficient manufacturing processes specifically for deep drawn stamping applications, focusing on maximizing throughput while minimizing scrap and rework., • Apply lean manufacturing principles, Kaizen events, and Six Sigma methodologies to identify and eliminate bottlenecks, increasing operational efficiency year over year., • Provide advanced technical support related to tooling design, material selection (e.g., various grades of steel, aluminum, and specialty alloys), and stamping operations to uphold engineering best practices., • Lead troubleshooting efforts for complex manufacturing issues, employing root cause analysis techniques to develop effective solutions that prevent recurrence., • Oversee multiple engineering projects from initial concept through to final implementation, ensuring projects meet established timelines and budgetary constraints while fulfilling customer requirements., • Engage directly with clients on custom projects, translating technical specifications and ensuring final products consistently meet rigorous quality benchmarks., • Establish and continuously improve comprehensive quality control procedures and metrics, conducting periodic audits and assessments to ensure manufacturing processes adhere to ISO 9001 standards., • Develop and manage robust testing and inspection protocols, utilizing advanced measurement techniques (e.g., laser scanning, CMM) to guarantee product reliability and safety., • Prepare and manage departmental budgets, conducting cost analyses to identify potential savings and justify capital expenditures for process upgrades and equipment acquisitions while maintaining high-quality output., • Collaborate closely with suppliers and vendors to source high-quality materials and components, negotiating favorable terms and establishing long-term partnerships that benefit production efficiency and cost-effectiveness., • Ensure all manufacturing processes fully comply with industry regulations, ISO standards, and environmental guidelines. Maintain awareness of changes in regulations and anticipate their impact on production practices. Requirements: • Directly related experience in metal stamping, with specific expertise in deep drawn processes and high-volume production environments., • Demonstrated leadership skills, with proven success in managing teams in manufacturing settings and achieving key performance metrics., • Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering simulation tools for process design and analysis., • Strong problem-solving skills, with an analytical mindset and keen attention to detail, capable of addressing complex engineering challenges., • In-depth knowledge of ISO standards, industry best practices, and quality management systems applicable to manufacturing processes., • Excellent communication and interpersonal skills, with the ability to effectively convey complex technical information to various stakeholders. Education: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related engineering field (Master's degree or relevant certifications preferred).Company DescriptionZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companiesZobility (RGBSI), is dedicated to providing the highest quality of services to our clients and employees. We are proud to be the primary partner to top companies in the automotive, aerospace & defense, IT, media & entertainment, sports, energy, and finance industries. As a result of our clients' continued growth, we are looking for energetic, personable professionals to partner with these leading US companies

Job DescriptionDescription: As a CNC Applications Engineer specializing in deep drawn manufacturing, you will be an integral part of our engineering team, responsible for the design, development, and production of precision components via advanced machining processes. This position necessitates a comprehensive understanding of how to convert flat metal sheets into intricate shapes using specialized deep drawing techniques that involve stretching and forming metal while ensuring its structural integrity remains uncompromised. Requirements: Key Responsibilities: · Spearhead the creation, development, and optimization of advanced CNC programs specifically designed for deep drawing operations. This task involves not only selecting the appropriate tooling but also ensuring material compatibility with various metals, including stainless steel, aluminum, and specialized alloys. · Engage closely with product design and engineering teams to meticulously review technical drawings and specifications. Provide valuable insights during the design phase to enhance manufacturability, confirming that all parts meet stringent tolerances and adhere to industry standards for safety and functionality. · Conduct thorough analyses of existing production processes to pinpoint inefficiencies. Propose and implement improvements, which may involve recalibrating machine settings, making tooling upgrades, or altering workflow strategies. The goal is to minimize cycle times while not compromising the high quality of the final product. · Deliver expert guidance and training to machinists and operators on the operation of CNC equipment and deep drawing best practices. Develop comprehensive training materials and facilitate engaging workshops aimed at enhancing team skills and reinforcing adherence to safety protocols. · Establish, maintain, and rigorously monitor quality control procedures throughout the manufacturing process. Employ statistical process control (SPC) methods to accurately track performance metrics and swiftly address any deviations from quality standards. · Undertake detailed feasibility assessments for new projects by analyzing production capabilities, cost implications, and project timelines. Collaborate effectively with the R&D department to prototype innovative designs, ensuring alignment between manufacturing processes and cutting-edge concepts. · Maintain up-to-date knowledge of the latest advancements in CNC technology and deep drawn manufacturing techniques. Assess and evaluate new machinery, tooling, and software tools to ensure our production processes remain at the forefront of industry standards. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related technical field from an accredited institution. · Proven track record of experience in CNC programming and operation, with specific expertise in processes related to deep drawn manufacturing, demonstrating a clear understanding of the nuances involved. · High proficiency in CAD/CAM software such as SolidWorks and Mastercam, along with familiarity in operating CNC machining centers and lathes. Strong analytical capabilities required to interpret complex engineering drawings, specifications, and manufacturing documentation. · Ability to identify, diagnose, and resolve technical issues within the manufacturing process efficiently, while maintaining a keen attention to detail. · Exceptional verbal and written communication skills, crucial for effective collaboration across multidisciplinary teams, including engineers, designers, and production staff. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization. Work Environment: This position will primarily be based in an office setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job Description Location: New Jersey Employment Type: Full Time Department: Engineering Reports To: Vice President of Operations About Us SICAM has been accelerating customers' product development since 1990 with proven rapid prototyping, rapid tooling, and manufacturing solutions. We assist our customers in turning product ideas into shipments, from product concept to full manufacturing. SICAM provides multiple services to take 3D CAD designs and transform them into prototypes and finished products. We pride ourselves on precision, speed, and innovation. Position Overview We’re looking for a hands-on Additive Manufacturing Engineer to join our fast-paced production team. You’ll play a key role in managing client projects, optimizing print processes, and ensuring the highest standards of quality and efficiency. Key Responsibilities • Interpret customer CAD files and prepare them for additive manufacturing., • Select appropriate materials and technologies (SLS, SLA, FDM, MJF, etc.) based on project requirements., • Operate and maintain industrial 3D printers and post-processing equipment., • Troubleshoot print issues and optimize build parameters for quality and throughput., • Collaborate with sales and customer service teams to provide technical input and project feasibility assessments., • Ensure timely delivery of parts while maintaining strict quality standards., • Bachelor’s degree in Mechanical Engineering, Manufacturing, Materials Science, or related field., • 2+ years of experience in additive manufacturing, preferably in a service or production environment., • Strong proficiency in CAD software (e.g., SolidWorks, Fusion 360)., • Familiarity with slicing software and build preparation tools (e.g., Magics)., • Excellent problem-solving skills and attention to detail., • Experience with plastic AM technologies and post-processing., • Knowledge of ISO 9001 quality systems., • Be part of a growing company at the forefront of digital manufacturing., • Work on diverse projects for top-tier clients., • Competitive salary and benefits., • Opportunities for career advancement and skill development. Company DescriptionWe’re SICAM, a pioneering leader in the world of 3D printing and rapid prototyping. Dedicated to pushing the boundaries of manufacturing technology, providing innovative solutions that transform ideas into reality. At SICAM, we cater to a diverse range of industries including aerospace, automotive, medical, consumer goods, and beyond, offering cutting-edge materials and state-of-the-art technologies that redefine precision and performance. Why SICAM is a Great Place to Work: Innovation at Its Core: At SICAM, innovation isn't just a buzzword; it's our way of life. We are constantly exploring new technologies and materials to deliver groundbreaking solutions that keep us at the forefront of the industry. Cutting-Edge Technology: Working at SICAM means having access to the latest and most advanced 3D printing and rapid prototyping technologies. You'll have the opportunity to work on exciting projects that challenge and inspire you. Professional Growth: SICAM is committed to the professional development of our employees. We offer continuous learning opportunities, training programs, and career advancement paths to help you achieve your full potential. Customer-Centric Approach: Our clients are at the heart of everything we do. We build strong, long-lasting relationships by understanding their unique needs and delivering customized solutions that exceed expectations. Dynamic Work Environment: We pride ourselves on maintaining a dynamic and fast-paced work environment. Every day brings new challenges and opportunities to innovate, making SICAM an exciting place to grow your career. Commitment to Excellence: Quality is paramount at SICAM. We are dedicated to delivering top-notch products and services, ensuring that our clients receive nothing but the best. Join SICAM and be a part of a forward-thinking company that is revolutionizing the future of manufacturing. If you are passionate about technology, eager to make a difference, and ready to take your career to new heights, SICAM is the perfect place for you. Let's shape the future together!We’re SICAM, a pioneering leader in the world of 3D printing and rapid prototyping. Dedicated to pushing the boundaries of manufacturing technology, providing innovative solutions that transform ideas into reality. At SICAM, we cater to a diverse range of industries including aerospace, automotive, medical, consumer goods, and beyond, offering cutting-edge materials and state-of-the-art technologies that redefine precision and performance. \r\n\r\nWhy SICAM is a Great Place to Work: \r\n\r\nInnovation at Its Core: At SICAM, innovation isn't just a buzzword; it's our way of life. We are constantly exploring new technologies and materials to deliver groundbreaking solutions that keep us at the forefront of the industry. \r\n\r\nCutting-Edge Technology: Working at SICAM means having access to the latest and most advanced 3D printing and rapid prototyping technologies. You'll have the opportunity to work on exciting projects that challenge and inspire you. \r\n\r\nProfessional Growth: SICAM is committed to the professional development of our employees. We offer continuous learning opportunities, training programs, and career advancement paths to help you achieve your full potential. \r\n\r\nCustomer-Centric Approach: Our clients are at the heart of everything we do. We build strong, long-lasting relationships by understanding their unique needs and delivering customized solutions that exceed expectations. \r\n\r\nDynamic Work Environment: We pride ourselves on maintaining a dynamic and fast-paced work environment. Every day brings new challenges and opportunities to innovate, making SICAM an exciting place to grow your career. \r\n\r\nCommitment to Excellence: Quality is paramount at SICAM. We are dedicated to delivering top-notch products and services, ensuring that our clients receive nothing but the best. \r\n\r\nJoin SICAM and be a part of a forward-thinking company that is revolutionizing the future of manufacturing. If you are passionate about technology, eager to make a difference, and ready to take your career to new heights, SICAM is the perfect place for you. Let's shape the future together!