Trabajos cad manager en Rochester, NYCrear alertas

Job Description M/E Engineering is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR rgcytCg1Kg

Job Description We are currently hiring a Project Manager in our Architectural division at our Rochester, NY office. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including State Corrections, Healthcare, K-12 and Higher Education, Residential, Commercial, and Municipal. The overall expectations of the Project Manager position are to work with large project teams, including outside subconsultants, to ensure that all aspects of the project are being met and completed. The Project Manager is responsible for leading an entire architectural project, from budget to implementation. The Project Manager oversees architectural projects from the conception stage through construction and the eventual completion of the project, making sure that project teams meet quality, schedule, contractual, and budget goals. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. Requirements • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 12+ years of experience, • Prior experience working with NYS OGS and other government agencies (desirable but not required), • Have thorough knowledge and understanding of New York State building codes., • Strong technical design and construction document skills, • Well-developed project design and planning skills, • Excellent graphic presentation skills, • CAD experience (AutoCAD and Revit), • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $90,000 - $115,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a Project Architect in our Architectural division at our Rochester, NY office. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including State Corrections, Healthcare, K-12 and Higher Education, Residential, Commercial, and Municipal. The overall expectations of the Project Architect position are to work with large project teams, including outside subconsultants, to ensure that all aspects of the project are being met and completed. An individual in this position needs to be capable of delegating aspects of work to the Project Technician and coordinating with all other disciplines. The Project Architect will assist the Project Manager with client meetings, design team meetings, and construction administration. In addition, the Project Architect must be motivated and capable of performing all duties with minimal guidance. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. Requirements • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 6-10+ years of experience, • Prior experience working with NYS OGS and/or other government agencies (desirable but not required), • Have thorough knowledge and understanding of New York State building codes, • Strong technical design and construction document skills, • Well-developed project design and planning skills, • Excellent graphic presentation skills, • CAD experience. (AutoCAD and Revit), • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10:00pm - 6:30am Before transitioning to a standard C shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description M/E Engineering is currently interviewing for a Mechanical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 1fvAqxldtb

Job Description Position Summary We're seeking a dynamic Quality Manager or Director to champion our client’s commitment to excellence. In this role, you'll be responsible for managing the day-to-day activities of the Quality Lab, quality inspection department and providing ongoing oversight and improvement of the quality management system. This role is key in driving quality initiatives across our precision manufacturing operations, ensuring we consistently exceed the exacting standards of our aerospace and advanced manufacturing customers. You'll lead a skilled quality team while fostering a company-wide culture of continuous improvement and unwavering commitment to quality. Job Responsibilities: • Audit company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Mentor and develop team members within our visual inspection room, fostering a culture of precision and continuous improvement., • Manage internal and external audit programs and develop quality documentation policies., • Troubleshoot and resolve product problems by analyzing quality data trends and developing a meaningful solution., • Serve as the point of contact for all technical quality related matters., • Serve as a key member on daily MRB meetings, updating staff on the day’s task list and any corrective action items., • Create and track meaningful quality metrics and KPIs., • Manage customer quality requirements and specifications., • Review all outgoing POs from outside service providers., • Oversee analytical work completed at each step of the production process to ensure that quality control standards are maintained., • Bachelor’s degree in engineering, quality, or a related technical field required., • A minimum of 5+ years of progressive quality leadership experience within a precision manufacturing environment—aerospace industry experience is highly preferred., • Demonstrated success leading and developing cross-functional quality teams, including oversight of Quality Engineers (5), Application Engineers (2), Quality Inspectors (2), and Visual Inspectors, within a regulated, high-precision production environment., • Deep technical aptitude with the ability to write and troubleshoot CNC programs, and a strong working knowledge of CAD/CAM systems, PartMaker, and MasterCAM., • Advanced understanding of tight tolerances, GD&T, and ability to read, interpret, and validate complex engineering blueprints., • Proven expertise maintaining and driving AS9100 and ISO 9001 certifications, with a hands-on approach to leading audits, compliance, and documentation across departments., • Strong record of leading and implementing quality improvement initiatives, reducing defects, and fostering a culture of continuous improvement., • Excellent interpersonal, communication, and leadership skills with the ability to articulate expectations clearly, processes, and corrective actions across teams., • Highly analytical with exceptional problem-solving and root cause analysis skills using industry tools such as 8D, FMEA, and SPC., • Proficient in Microsoft Office Suite and modern QMS software platforms., • Solid foundation in machine shop theory, inspection methods, and advanced metrology tools.

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2:00pm - 10:30pm Before transitioning to a standard B shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description M/E Engineering is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR u4b4yxTDIC

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description M/E Engineering is interviewing for a Mechanical Design Engineer in our Rochester, NY office. We are a growing full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering, P.C. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of the Project Engineer/Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Partner, Associate, and or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a partial or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate degree, Bachelor of Science degree, or equivalent combination of education and experience., • The compensation range for this position is $62,400 to $72,500 per year. M/E Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR UdCWHpz81h

Job Description Schedule: Monday-Friday 7a-4:30p and a couple Saturdays a month 6a-12p Direct Reports: 4-5 Quality Engineers, 2 Applications Engineers, 2-4+ Quality Inspectors Must have machined part experience in the aerospace industry We're seeking a dynamic Quality Manager to champion our client’s commitment to excellence. In this role, you'll be responsible for managing the day-to-day activities of the Quality Lab, quality inspection department and providing ongoing oversight and improvement of the quality management system. This role is key in driving quality initiatives across our precision manufacturing operations, ensuring we consistently exceed the exacting standards of our aerospace and advanced manufacturing customers. You'll lead a skilled quality team while fostering a company-wide culture of continuous improvement and unwavering commitment to quality. Job Responsibilities: • Support internal and customer ISO 9001 and AS9100 audits; policies, procedures, and systems that affect product quality to assure compliance with the company’s and customer's quality system and good manufacturing processes., • Establish, adjust, and implement AS9100 quality processes, and standards, accordingly., • Mentor and develop team members within the quality inspection, visual inspection room, and quality floor, fostering a culture of precision and continuous improvement., • Manage internal and external audit programs and provide support to the Director in developing quality documentation policies., • Troubleshoot and resolve product problems by analyzing quality data trends and developing a meaningful solution., • Serve as the point of contact for all technical quality related matters., • Serve as a key member on daily MRB meetings, updating staff on the day’s task list and any corrective action items., • Create and track meaningful quality metrics, performance reviews, training support, and adherence of employee KPIs., • Manage customer quality requirements and specifications., • Review all outgoing POs from outside service providers., • Oversee analytical work completed at each step of the production process to ensure that quality control standards are maintained., • Optimize inspection processes and drive reduction in non-conformances. Requirements • Bachelor’s degree in engineering, quality, or a related technical field, required., • A minimum of 5+ years of progressive quality leadership experience within precision manufacturing—aerospace AS9100 environments., • Demonstrated success leading and developing cross-functional quality teams, including oversight of Quality Engineers (5), Application Engineers (2), Quality Inspectors (2), and Visual Inspectors, within a regulated, high-precision production environment., • Deep technical aptitude with the ability to write and troubleshoot CNC programs., • Strong working knowledge of CAD/CAM systems, PartMaker, and MasterCAM, required., • Advanced understanding of tight tolerances, GD&T, and ability to read, interpret, and validate complex engineering blueprints., • Proven expertise maintaining and driving AS9100 and ISO 9001 certifications, with a hands-on approach to support audits, compliance, and documentation across departments., • Strong record of leading and implementing quality improvement initiatives, reducing defects, and fostering a culture of continuous improvement., • Excellent interpersonal, communication, and leadership skills with the ability to articulate expectations clearly, processes, and corrective actions across teams., • Highly analytical with exceptional problem-solving and root cause analysis skills using industry tools such as 8D, FMEA, and SPC., • Proficient in Microsoft Office Suite and AS9100 QMS software platforms., • Solid foundation in machine shop theory, inspection methods, and advanced metrology tools., • Must be able to prioritize effectively, multitask in a dynamic environment, and lead teams in achieving both tactical and strategic quality goals. 2. Have (prior experience with ERP/MRP Systems) and (understand the "why" they use it and what its used for)=(Epicor is desired), 3. Skilled in being able to read and interpret customer blueprints in GD&T (engineering documents that show what part they are making in GD&T) - and think beyond just doing their job but understand the "WHY" behind each one., 4. Strong working knowledge of CAD/CAM systems, PartMaker, and MasterCAM, SolidWorks & MS Office Suite, Excel, required. If re-work needs to be completed with customer parts, tooling etc., 5. Must have had managed Direct Reports prior as a Quality Manager. (# doesnt matter). Would have 8 Direct Reports. Managing Quality Inspectors & 5 Quality Engineers, and 2 Applications Engineers., 6. Must have comfortability working overtime hours in this role: they work Saturdays (6am-12pm) if needed.

Job DescriptionAbout DDS Engineering and Surveying, LLP DDS Engineering and Surveying, LLP pioneers precision in land surveying, fueling infrastructure projects that shape communities. Our expert team leverages cutting-edge tools like sUAV photogrammetry and point cloud processing to deliver reliable, high-impact survey solutions for utility, energy, and construction clients. Join us to apply your boundary survey expertise in a fast-paced, collaborative environment, where your work drives project success and career growth. Join Our Team: At DDS, you’ll harness advanced technology to deliver precision for transformative projects, from energy infrastructure to community development. Our supportive culture and commitment to safety and quality empower you to grow alongside industry leaders. Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and or FSA Accounts, • Process survey data using Trimble Business Center and Carlson for accurate boundary, topographic, and utility survey deliverables., • Perform point cloud processing with Leica Register 360 for 3D modeling and CAD integration., • Conduct sUAV aerial photogrammetry using Pix4D to produce orthomosaics, digital surface models, and topographic data., • Draft survey maps, certified plats, and exhibits using AutoCAD Civil 3D, AutoCAD Map 3D, and/or MicroStation, adhering to client and regulatory standards., • Prepare precise legal descriptions, including metes and bounds and ALTA survey descriptions, for boundary surveys and easements., • Conduct deed research, locate and analyze monuments, and prepare certified boundary plats for complex projects., • Collaborate with field survey crews to ensure data accuracy, occasionally supporting field tasks (e.g., quality control, site verification)., • Work with professional engineers from DDS’s Land Development and Energy Services Groups to integrate survey data into infrastructure projects., • Engage with clients to clarify project requirements and deliver high-quality deliverables on time., • 5–10 years of land surveying experience, with strong expertise in boundary surveys (e.g., deed research, monumentation, certified plats)., • Proficiency in survey data processing with Trimble Business Center and Carlson., • Experience with point cloud processing (Leica Register 360) and sUAV aerial photogrammetry (Pix4D)., • Advanced CAD drafting skills with AutoCAD Civil 3D, AutoCAD Map 3D, and/or MicroStation., • Ability to write accurate metes and bounds and ALTA survey legal descriptions., • Knowledge of land surveying principles and deliverables (e.g., boundary, topographic, ALTA, utility surveys)., • Strong problem-solving skills, attention to detail, and ability to work independently or collaboratively., • Valid driver’s license with a clean driving record for occasional field work.Preferred, • Associate or bachelor’s degree in surveying, geomatics, or related field., • Professional Land Surveyor (PLS) license or Surveyor-in-Training (SIT) certification., • Certified Survey Technician (CST) or FAA Part 107 sUAV certification., • Experience with additional survey types (e.g., utility designation, construction stakeout, right-of-way). Powered by JazzHR p6YrktN8uJ

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Construction Project Manager II is responsible for planning, managing, and supervising the execution of construction projects while balancing budget, quality, and schedule. This role is deployed on multiple projects whose project duration extends 3 to 12 months, include multiple subcontractors, and multiple disciplines scope of work. What are we looking for: • Associates degree required. in a field related to construction (i.e., engineering, architecture) or equivalent related work experience required. Bachelor's degree preferred., • 5+ years of progressive experience in a role performing project management job functions for construction projects required. This role requires applicable experience in building infrastructure and/or energy reduction initiatives., • Additional certifications (i.e. CEM, LEED AP, EIT, or PE) also a plus., • Proficient with planning, scheduling, and coordinating detailed phases of projects., • Proficient with time management to follow the various detailed phases of projects., • Proficient computer skills, including Microsoft Office. CAD experience a plus., • Strong written and verbal communication skills are necessary. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description M/E Engineering is interviewing for an Electrical Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop the skills of the Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Associate and/or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate Degree, Bachelor of Science Degree, or equivalent combination of education and experience. Powered by JazzHR J8vNIuu8Xq

We are seeking a highly organized and proactive Project Manager to support the final stages of equipment acceptance for Phases 3 and 4 of the Fairport Expansion.

The Graphic Designer plays a pivotal role in elevating the visual identity of the brand across all touchpoints.They are responsible for creating engaging and impactful designs that support product launches, promotional campaigns, and brand storytelling across print and digital platforms.Collaboratin

GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commissioning, and close out. The SPM will be

One of the leading General Contractors in Upstate New York is looking to support its continuing.This seasoned professional will need .Candidates who love to build and are seeking to join this fun family-friendly growth-oriented company will need to have a degree in Construction Management, Engi

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.

The Assistant Project Manager is accountable for ensuring that customer service is delivered by hiring, training, supervising, and coordinating employees engaged in cleaning and maintaining facilities in his/her assigned account(s) in accordance with contract specifications. Assist the Project Manag

We are seeking a motivated, detail-driven Project Manager. Proficiency in AutoCAD is preferred but not required; familiarity with Revit, SketchUp, or similar tools a plus. Commercial Construction Project Manager / Estimator.

We are hiring Project Managers in the following locations:. Our Utility Sector team is growing! The Utility Project Manager supports electrical utility capital projects including substation upgrades, transmission line upgrades, hydro projects, Smart Grids, environmental compliance work, and gas proj

Our client is currently seeking a motivated Commercial Construction Project Manager to join their growing team who is looking to grow with the business. The Commercial Construction Project Manager will:. The successful Commercial Construction Project Manager will have the following:.

Healthcare Customer Project Manager - Field Based In Syracuse Or Rochester, NY Area.

Construction Project Manager-Rochester, NY. Project Manager-program management services for of a varied portfolio of projects including but not limited to project planning, tracking, schedule performance, and project controls for monitoring of various building construction and renovation projects. S

The Commercial Construction Project Manager will receive:. Commercial Construction Project Manager. Our client is a full-service General Contractor/Construction Manager that has been in business for over 40 years.

Project Manager - Small On-Site. Therefore employees assigned may be required to perform additional job tasks required by the manager.

This position is responsible for developing and leading a diverse team of utility engineering experts tasked with the performance of comprehensive needs and solutions assessments to address a wide range of T&S reliability and infrastructure needs.Some specific responsibilities include oversight of t

Construction Project Manager II. How do you excel in this position: The Construction Project Manager II is responsible for planning, managing, and supervising the execution of construction projects while balancing budget, quality, and schedule.

Reports updates to senior project managers and stakeholders. Identifies and escalates potential risks or issues to senior project managers.

The firm is seeking a Project Manager with a background in building multifamily projects above $8 million. The Multifamily Construction Project Manager will:. The Multifamily Construction Project Manager should have:.

Job Opportunity At The University Of Rochester.As a community, the University of Rochester is defined by a deep commitment to Meliora - Ever Better.Embedded in that ideal are the values we share: equity, leadership, integrity, openness, respect, and accountability.Together, we will set the highest s

Project Manager (Contract Management). Reporting to Sr Manager, Contract Management.

General Purpose: The Project Manager I will oversee the strategic planning, coordination, and execution of the Sustaining Change Project including the Leadership Initiative for Transformation (LIFT) initiative, dedicated to fostering resilience, leadership development, and health equity in under-sup

One of the area's most highly respected General Contractors is seeking a Project Manager to join their growing team. The Project Manager provides the overall leadership for the execution of successful outcomes on Commercial Construction projects. The Project Manager leads the project team with a foc

Job Description: We are seeking a highly organized and proactive Project Manager to support the final stages of equipment acceptance for Phases 3 and 4 of the Fairport Expansion. Project Manager For Fairport Expansion.

Traveling Construction Project Manager/Superintendent. We are currently hiring a Traveling Construction Project Manager/Superintendent to oversee ground-up construction projects for multiple companies across Western New York. Responsibilities of The Traveling Construction Project Manager/Superintend

Coaches and mentors other Project Managers on project management best practices and tools.

Therefore employees assigned may be required to perform additional job tasks required by the manager.

Location: New York Region based; may be 100% remote in the area or if close to Manhattan or West Henrietta will report to the local office.Will work a hybrid schedule of Monday and Friday being WFH and Tuesday - Thursday are in the office.Travel: From time to time there will be team meetings and cli

Mastodon Design, a division of CACI, is looking to hire an Engineering Project Manager to join their growing team in Rochester, NY.

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods.Evaluates mechanical and electromechanical systems and produ

High School Diploma or equivalent.Associates or Bachelor's degree a plus but not required.Years of Project Management Experience in Construction, Remodeling, or Restoration.Ability to multi-task and prioritize.High aptitude in Microsoft Office Suite and other software.Performance versus annual goals

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials.Plans concept by studying information and materials.Illustrates concept by designing rough layo

The Facilities Project Manager is an experienced professional with knowledge of project management. Microsoft Office, AutoCAD, MS Project and Estimating software.

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods.Evaluates mechanical and electromechanical systems and produ

Do you consider yourself to be a highly technical, strong communicator with the desire to work in a team environment on complex projects? Gilbane is seeking a Senior Project Manager to serve as the on-site Gilbane manager, responsible for the overall direction, completion, and financial outcome of a