Trabajos city construction en Orange, New JerseyCrear alertas

Job Description Haddad Plumbing & Heating Inc. is seeking an experienced HVAC Installer to join our growing team. The HVAC Installer will support the HVAC department by installing, replacing, and commissioning commercial and industrial HVAC systems. This position is responsible for ensuring all installations are completed safely, efficiently, and in accordance with project specifications, manufacturer guidelines, and applicable codes. Essential Functions • Install commercial HVAC equipment including rooftop units, split systems, package units, air handlers, exhaust fans, and ventilation systems., • Install ductwork, refrigeration piping, gas piping, condensate drains, and associated HVAC components., • Read and interpret blueprints, mechanical drawings, and project specifications., • Assemble, install, and secure HVAC equipment according to manufacturer recommendations and company standards., • Test newly installed equipment to verify proper operation and performance., • Coordinate with project managers, supervisors, and other trades to ensure projects remain on schedule., • Maintain accurate documentation of work performed and communicate project updates as needed., • Deliver and transport equipment and materials to job sites when required., • Maintain a clean, organized, and safe work environment., • Adhere to all company safety policies and OSHA regulations., • Use and maintain appropriate personal protective equipment (PPE) as prescribed by the company.Education, Qualities & Skills Required, • High school diploma or equivalent., • OSHA 10 required (OSHA 30 preferred)., • Minimum of 3–5 years of commercial HVAC installation experience., • Experience installing commercial HVAC equipment, ductwork, piping, and ventilation systems., • Ability to read and interpret blueprints and mechanical drawings., • Strong mechanical aptitude and troubleshooting skills during installation., • Ability to work independently and as part of a team., • Excellent communication and organizational skills., • Commitment to producing high-quality workmanship., • Ability to lift up to 75 pounds and work in varying weather conditions., • Valid Driver's License with a clean driving record.Compensation $20-$25 per hour, depending on experience. Benefits Include • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday through Friday, 7:00 a.m. – 3:30 p.m., with Saturdays as needed based on project requirements. About Haddad Plumbing & Heating Inc. Haddad Plumbing & Heating Inc. is a commercial plumbing and HVAC contractor serving New Jersey, New York City, and Westchester County for over 25 years. We specialize in commercial new construction, renovations, and service for mid-rise and high-rise buildings. Our team is committed to delivering exceptional workmanship, innovative solutions, and dependable service on every project. From preconstruction planning and in-house drafting to project management and field installation, we work together to deliver quality results while building lasting relationships with our clients. If you're looking to join a company that values craftsmanship, teamwork, safety, and professional growth, we'd love to hear from you. Powered by JazzHR TRb328ZG0a

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Job Description Founded in 1965, Universal Supply operates locations in five states, Connecticut, Delaware, New Jersey, Maryland and Pennsylvania, providing professional builders with the best in specialty building products, including roofing, siding, windows, doors, cabinetry, millwork and fasteners. . A Brief Overview The CDL Driver Boom Crane is responsible for the safe, efficient transportation of wall panels, trusses and other materials to job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. The CDL Driver Boom Crane may also operate specialized equipment such as articulated booms, knuckle booms, conveyors, or cable-over-sheave systems as required. Pay Range: $28.00 - $35.00/hour What you will do • Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner., • Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required., • Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations., • Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites., • Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery., • Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits., • Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations., • Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery., • Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling., • Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites., • Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation., • Assist with stocking and organizing inventory in the warehouse and production areas., • Operates specialized equipment such as articulated booms, knuckle booms, conveyors, or cable-over-sheave systems as required., • Performs inspections of boom crane safety equipment to ensure proper function and compliance with safety standards., • Safely maneuver and position the boom crane to load and unload materials with precision and care., • Supervise work of associates involved in scope of operation. Required For All Jobs • Perform other duties as assigned., • Comply with all policies and standards., • Adheres to Company’s commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • 3+ years CDL experience preferred., • Experience transporting and handling lumber and building materials required., • Experience operating boom trucks and truck-mounted cranes preferred., • Experience with load charts, rigging practices, and weight distribution for safe crane operation preferred. Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms., • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills., • Ability to deal constructively with conflict and recognize potential problems., • Maintain current operator’s license and meet company driver qualification requirements., • Knowledge and ability to use safe lifting techniques., • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications)., • Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries., • Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance., • Demonstrates comprehensive knowledge of crane and boom safety regulations and procedures, ensuring safe operation in compliance with industry standards., • Ability to lift, secure and transport loads safely using a boom crane. Licenses and Certifications • Certified Drill Rig Operator-NCCCO Boom Certification preferred – maintain active accredited certification for equipment type (e.g. NCCCO, NCCER, CIC) preferred., • Class A CDL License required., • Class B CDL License required. . Universal Supply Co., a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Job Description Pipe Welders needed for multiple industrial projects in the Salt Lake City, UT area. Primary duties will include Mig, Tig, and Stick welding stainless and carbon structural steel using 6010, 7018, and 309 stainless steel. There will be an informal weld test in the shop your first day, using whatever materials are available in the shop at the time. Benefits include medical, dental, and vacation after a 90 day probationary period. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Paying up to $40/hr No per diem Temp to perm with benefits Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Civil/Structural Project Engineer – Solar & Battery Storage \n \n Company Overview: \n Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. \n \n Position Description: \n Soltage is seeking an experienced Civil/Structural Project Engineer to own civil, structural, and site civil engineering for our standalone battery energy storage (BESS) and solar-plus-storage projects, from design review through construction and commissioning. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. \n \n Job Responsibilities: \n\n • Support civil and structural design for utility-scale BESS, solar PV, substation, and balance-of-plant (BOP) infrastructure across North America.\n, • Lead technical review of civil and structural deliverables, including grading, drainage, stormwater, foundations, equipment support structures, retaining systems, access roads, underground utilities, cable trenches, and erosion and sediment control.\n, • Conduct site visits for field investigations, constructability reviews, geotechnical observations, and foundation and civil infrastructure inspections.\n, • Develop and review engineering calculations, specifications, construction drawings, and submittals for compliance with project requirements and design standards.\n, • Serve as the primary technical point of contact for civil and structural matters from detailed engineering through closeout, and oversee external engineering consultants.\n, • Review vendor foundation and wall designs, equipment loads, seismic criteria, and installation requirements for BESS containers, inverters, transformers, switchgear, and substation equipment.\n, • Support RFPs, EPC bid evaluations, engineering estimates, and value engineering.\n, • Resolve RFIs, NCRs, field design changes, and construction issues with contractors to minimize schedule and cost impacts.\n, • Verify completion of civil and structural work during commissioning and support mechanical completion and turnover.\n\n \n Experience and Education Requirements: \n Required qualifications: \n\n • Bachelor’s degree in engineering required (Civil Engineering preferred).\n, • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members.\n, • Highly organized and self-directed; able to manage multiple projects under tight deadlines.\n, • Minimum of 3 to 5 years of project or field engineering experience on urban civil construction projects supporting electrical generation or utility equipment.\n, • Strong knowledge of civil and structural engineering for utility-scale BESS, solar PV, substations, and high-voltage infrastructure, including applicable North American codes and standards.\n, • Working knowledge of structural steel, reinforced concrete, shallow and deep foundations, equipment anchorage, seismic and wind loading, retaining and fire/noise-rated walls, duct banks, and cable trenches.\n, • Working knowledge of site development (grading, drainage, stormwater, erosion control, access roads) and geotechnical principles (bearing capacity, settlement, slope stability, liquefaction).\n, • Experience coordinating with EPC contractors, equipment manufacturers, utilities, Owner’s Engineers, and regulatory agencies.\n, • Familiarity with construction QA/QC documentation, including RFIs, submittals, ITPs, NCRs, punch lists, and as-builts.\n, • Familiarity with construction sequencing, heavy equipment installation, crane planning, and contractor means and methods.\n, • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook).\n\n Preferred qualifications: \n\n • New York State Engineer in Training (EIT) certification.\n, • Experience with construction management and scheduling software such as Procore or Primavera P6.\n, • Familiarity with AutoCAD / Civil 3D.\n\n \n Location: \n This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, New Jersey. \n \n \n Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “Civil Engineer” as the subject line. \n \n \n \n Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. \n \n \n ‍PROTECT YOURSELF FROM FRAUD \n Please be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com. \n

\n Protection and Control Engineer – Solar & Battery Storage Commissioning \n \n Company Overview: \n Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. \n \n Position Description: \n Soltage is seeking an experienced Protection and Control (P&C) Engineer to lead P&C, SCADA, and commissioning engineering for our standalone energy storage (BESS), solar-plus-storage, and solar PV projects, from relay settings and design review through utility witness testing and energization. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. \n \n Job Responsibilities: \n\n • Provide P&C, SCADA, RTAC, communications, and commissioning engineering for utility-scale BESS, solar PV, and medium- and high-voltage substations across North America.\n, • Lead development and review of P&C packages, including protection philosophies, relay settings coordination, AC/DC schematics, wiring diagrams, panel layouts, and communications architecture.\n, • Develop and review commissioning procedures, relay logic, cause-and-effect matrices, functional specifications, and test documentation.\n, • Oversee SCADA and Energy Management System (EMS) integration, including RTUs, RTACs, HMIs, historians, remote communications, and cybersecurity.\n, • Support implementation of communication protocols including DNP3, Modbus TCP/IP and RTU, IEC 61850, IEC 60870-5-104, OPC UA, and IEEE C37.118.\n, • Lead commissioning activities, including point-to-point verification, relay testing, SCADA checkout, utility witness testing, grid synchronization, and commercial operation support.\n, • Perform root cause analysis on protection events, equipment failures, and communication issues, and recommend corrective actions.\n, • Review vendor submittals, protection studies, commissioning reports, and as-built documentation.\n, • Support EPC scopes of work, technical specifications, and RFPs for P&C, SCADA, and commissioning services.\n\n \n Experience and Education Requirements: \n Required qualifications: \n\n • Bachelor’s degree in engineering required (Electrical Engineering preferred).\n, • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members.\n, • Highly organized and self-directed; able to manage multiple projects under tight deadlines.\n\n · Minimum of 3 to 5 years of project or field engineering experience on renewable construction projects, with a focus on P&C design and implementation and plant commissioning. \n\n • Strong knowledge of P&C systems for utility-scale substations, BESS, solar PV, and medium-voltage interconnection facilities.\n, • Working knowledge of SCADA architectures, substation automation, RTACs, RTUs, protective relays, and industrial networking.\n, • Working knowledge of electrical protection principles including overcurrent, differential, distance, transformer, feeder, bus, breaker failure, synch-check, anti-islanding, and transfer trip protection schemes.\n, • Familiarity with utility interconnection requirements and applicable North American codes and standards.\n, • Working knowledge of commissioning processes including FAT, SAT, relay and protection testing, SCADA verification, and energization.\n, • Familiarity with commissioning documentation, including RFIs, submittals, ITPs, punch lists, deficiency tracking, and as-builts.\n, • Experience writing proposals and presenting to consultants, authorities having jurisdiction (AHJs), and regulatory agencies.\n, • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook).\n\n Preferred qualifications: \n\n • Experience configuring and troubleshooting SEL protective relays, SEL RTAC platforms, Ethernet switches, and related automation equipment.\n, • New York State Engineer in Training (EIT) certification.\n, • Experience with construction management and scheduling software such as Procore or Primavera P6.\n\n \n Location: \n This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, NJ. \n \n Application Instructions: \n To apply for this position, resumes may be sent directly to HR@soltage.com with “P&C Engineer” as the subject line. \n \n Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. \n \n \n PROTECT YOURSELF FROM FRAUD \n Please be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Company Description Arena Stone NJ is a wholesale distributor of natural stone products, importing premium materials from around the world. The company offers one of the largest selections of marble, including Calacatta Gold and Statuary, as well as granite and natural quartzites. Located at 690 Washington Avenue in Carlstadt, New Jersey, the facility is easily accessible and just minutes from New York City. Arena Stone NJ has been serving customers across the East Coast for more than 25 years, building long-term relationships with contractors, designers, and retailers. Team members join a stable, customer-focused organization with deep expertise in the stone industry. Role Description The Inside Sales Representative is a full-time, on-site role based at our Carlstadt, NJ facility. This position is responsible for managing inbound and outbound sales calls, assisting walk-in customers, and providing product information and recommendations to support client needs. Daily tasks include building and maintaining customer accounts, preparing quotes, following up on leads, and coordinating with warehouse and logistics teams to ensure timely order fulfillment. The role also involves updating the CRM system, tracking sales activities, and supporting marketing initiatives to drive new business. The Inside Sales Representative contributes directly to sales growth and customer satisfaction by offering knowledgeable, responsive service in a fast-paced environment. Qualifications • Demonstrated Inside Sales skills, including handling inquiries, presenting products, and closing sales., • Strong Customer Service and Customer Satisfaction focus, with the ability to build rapport and maintain long-term relationships., • Experience with Lead Generation and Account Management to develop new business and grow existing accounts., • Effective communication skills, both verbal and written, with professional phone and in-person presence., • Ability to work on-site in Carlstadt, NJ, in a fast-paced environment and collaborate with operations and logistics teams., • Basic proficiency with CRM software and common office applications (e.g., email, spreadsheets, order entry systems)., • Detail-oriented approach to pricing, quoting, and order processing, with good organizational and time-management skills., • Prior experience in wholesale, distribution, construction materials, or natural stone is preferred but not required.

Company Description Arena Stone NJ is a wholesale distributor of natural stone products, importing premium materials from around the world. The company offers one of the largest selections of marble, including Calacatta Gold and Statuary, as well as granite and natural quartzites. Located at 690 Washington Avenue in Carlstadt, New Jersey, the facility is easily accessible and just minutes from New York City. Arena Stone NJ has been serving customers across the East Coast for more than 25 years, building long-term relationships with contractors, designers, and retailers. Team members join a stable, customer-focused organization with deep expertise in the stone industry. Role Description The Inside Sales Representative is a full-time, on-site role based at our Carlstadt, NJ facility. This position is responsible for managing inbound and outbound sales calls, assisting walk-in customers, and providing product information and recommendations to support client needs. Daily tasks include building and maintaining customer accounts, preparing quotes, following up on leads, and coordinating with warehouse and logistics teams to ensure timely order fulfillment. The role also involves updating the CRM system, tracking sales activities, and supporting marketing initiatives to drive new business. The Inside Sales Representative contributes directly to sales growth and customer satisfaction by offering knowledgeable, responsive service in a fast-paced environment. Qualifications • Demonstrated Inside Sales skills, including handling inquiries, presenting products, and closing sales., • Strong Customer Service and Customer Satisfaction focus, with the ability to build rapport and maintain long-term relationships., • Experience with Lead Generation and Account Management to develop new business and grow existing accounts., • Effective communication skills, both verbal and written, with professional phone and in-person presence., • Ability to work on-site in Carlstadt, NJ, in a fast-paced environment and collaborate with operations and logistics teams., • Basic proficiency with CRM software and common office applications (e.g., email, spreadsheets, order entry systems)., • Detail-oriented approach to pricing, quoting, and order processing, with good organizational and time-management skills., • Prior experience in wholesale, distribution, construction materials, or natural stone is preferred but not required.

Protection and Control Engineer – Solar & Battery Storage Commissioning Company Overview: Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. Position Description: Soltage is seeking an experienced Protection and Control (P&C) Engineer to lead P&C, SCADA, and commissioning engineering for our standalone energy storage (BESS), solar-plus-storage, and solar PV projects, from relay settings and design review through utility witness testing and energization. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. Job Responsibilities: • Provide P&C, SCADA, RTAC, communications, and commissioning engineering for utility-scale BESS, solar PV, and medium- and high-voltage substations across North America., • Lead development and review of P&C packages, including protection philosophies, relay settings coordination, AC/DC schematics, wiring diagrams, panel layouts, and communications architecture., • Develop and review commissioning procedures, relay logic, cause-and-effect matrices, functional specifications, and test documentation., • Oversee SCADA and Energy Management System (EMS) integration, including RTUs, RTACs, HMIs, historians, remote communications, and cybersecurity., • Support implementation of communication protocols including DNP3, Modbus TCP/IP and RTU, IEC 61850, IEC 60870-5-104, OPC UA, and IEEE C37.118., • Lead commissioning activities, including point-to-point verification, relay testing, SCADA checkout, utility witness testing, grid synchronization, and commercial operation support., • Perform root cause analysis on protection events, equipment failures, and communication issues, and recommend corrective actions., • Review vendor submittals, protection studies, commissioning reports, and as-built documentation., • Support EPC scopes of work, technical specifications, and RFPs for P&C, SCADA, and commissioning services. Experience and Education Requirements: Required qualifications: • Bachelor’s degree in engineering required (Electrical Engineering preferred)., • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members., • Highly organized and self-directed; able to manage multiple projects under tight deadlines. · Minimum of 3 to 5 years of project or field engineering experience on renewable construction projects, with a focus on P&C design and implementation and plant commissioning. • Strong knowledge of P&C systems for utility-scale substations, BESS, solar PV, and medium-voltage interconnection facilities., • Working knowledge of SCADA architectures, substation automation, RTACs, RTUs, protective relays, and industrial networking., • Working knowledge of electrical protection principles including overcurrent, differential, distance, transformer, feeder, bus, breaker failure, synch-check, anti-islanding, and transfer trip protection schemes., • Familiarity with utility interconnection requirements and applicable North American codes and standards., • Working knowledge of commissioning processes including FAT, SAT, relay and protection testing, SCADA verification, and energization., • Familiarity with commissioning documentation, including RFIs, submittals, ITPs, punch lists, deficiency tracking, and as-builts., • Experience writing proposals and presenting to consultants, authorities having jurisdiction (AHJs), and regulatory agencies., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook). Preferred qualifications: • Experience configuring and troubleshooting SEL protective relays, SEL RTAC platforms, Ethernet switches, and related automation equipment., • New York State Engineer in Training (EIT) certification., • Experience with construction management and scheduling software such as Procore or Primavera P6. Location: This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, NJ. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “P&C Engineer” as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. PROTECT YOURSELF FROM FRAUD Please be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Immediate need for a talented Data Center Architect. This is a 18 months contract opportunity with long-term potential and is located in Charlotte NC/Jersey City NJ, and Plano TX/Chandler AZ (Hybrid). Please review the job description below and contact me ASAP if you are interested. Job ID:26-26581 Pay Range: $50 - $58/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: • Data Center Engineering role focused on physical critical facilities, not IT hardware/software., • Design, maintain, upgrade, and expand power, cooling, capacity, and resilient infrastructure., • Experience in Data Center/Critical Facilities/Mission-Critical/Colocation/Hyperscale environments preferred., • Key areas: electrical systems, generators, switchgear, power distribution, cooling, capacity planning, redundancy/failover, DCIM, construction, commissioning, and RCA., • Lead/support infrastructure engineering, design standards, technical requirements, risk assessment, and project delivery., • Manage budgets/costs, operational metrics, reliability, efficiency, and continuous improvement., • Strong communication, leadership, problem-solving, and cross-functional/matrixed collaboration skills., • Typically 5 years of Data Center/Critical Systems/infrastructure engineering experience., • Desired: availability/resiliency planning, utility/AHJ coordination, commissioning, site assessments, facility upgrades, failure analysis, and data center operations. Our client is a leading Financial Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy _.

Senior Associate, Portfolio Management & Corporate Finance (Renewable Energy) Company Overview: Soltage is a leader in the development, financing, and operation of distributed utility-scale solar, storage and solar + storage assets for commercial, industrial, municipal, and utility customers across the United States. Soltage has developed more than 135 solar energy projects, with more than 600 MW total distributed generating capacity in operation or under construction and invested over $1.5 Billion to date into the US clean energy sector. Soltage is headquartered in Jersey City, New Jersey. Position Description: We are seeking a Senior Associate, Portfolio Management & Corporate Finance to take a leadership seat on the team that sits at the center of how Soltage funds and grows its business. This is a role for someone who has already done the work at the associate level and is ready to own outcomes, set the standard for how the team executes, and develop the analysts and associates around them. You will operate across three connected mandates. On the portfolio side, you will own the intake of newly closed solar and storage projects into Soltage's financing vehicles and run the debt and tax equity fundings that keep capital flowing to construction, serving as the day-to-day lead with lenders and tax equity investors. On the corporate side, you will help lead capital raises at the platform level - corporate credit facilities, holdco debt, and equity capital - and then manage those vehicles day to day, from availability and covenant compliance through lender reporting and repayment. And across both, you will stay with the assets long after they energize - keeping each financing vehicle compliant and well-run through the full operating life of its projects and bringing a strategic lens to portfolio operations. The ideal candidate brings several years of directly relevant experience in portfolio management, corporate finance, investment banking, or project finance; ; exercises independent judgment on issues that reach management, and thrives leading complex processes across deal, accounting, legal, and lender teams. ‍ Job Responsibilities: • Own the portfolio onboarding process, directing junior team members and coordinating with the investments team to carry newly closed projects, deals, and funding transactions from signature to fully integrated, fully funded assets., • Own debt and tax equity fundings end to end — from draw request through close — acting as the primary point of contact for lenders, tax equity investors, and their counsel, and resolving funding conditions and diligence issues as they arise., • Take a lead workstream role in capital formation at the corporate level: help structure, market, and close corporate credit facilities, holdco debt, and equity capital, running lender and investor diligence, and working with counsel on the commercial terms of the financing documents., • Own the ongoing management of those corporate vehicles after close: borrowing base and availability, covenant compliance, draws and repayments, and lender and investor deliverables., • Build and maintain the corporate capital model: sources and uses, liquidity forecasting, and scenario analysis that shape how and when Soltage raises its next dollar., • Manage communication as a trusted point of contact for Soltage's capital partners, including the development of investor and lender reporting materials., • Calculate and oversee debt service, distributions, and cash waterfalls; adhere to portfolio requirements and standards outlined in financing and organizational documents., • Identify and implement process improvements that allow a fast-growing portfolio to scale without adding friction., • Contribute to corporate FP&A alongside senior members of the team: helping build the operating budget and multi-year plan, owning the monthly and quarterly variance analysis against actuals, and giving management a clear read on liquidity, cash flow, and capital needs., • Manage Soltage's financing vehicles through the operating life of the assets, owning the recurring compliance calendar: covenant and DSCR testing, reserve requirements, distributions, and lender and tax equity reporting obligations that continue long after a project reaches commercial operation., • Provide strategic and business oversight of the portfolio: track asset and fund-level performance against underwriting, surface refinancing and value-creation opportunities, and recommend where Soltage should hold, recapitalize, or recycle capital., • Shape corporate budgeting, liquidity monitoring, and capital planning, including how capital gets allocated across the platform., • Mentor analysts and associates — reviewing their work, teaching the mechanics of fundings and compliance, and codifying how the team executes., • Lead special projects and cross-functional initiatives, and take on additional responsibilities as the platform grows. Experience and Education Requirements: • Bachelor’s degree in finance, business, or a related field., • Master’s degree in finance, business, or a related field, or Juris Doctor a plus., • A minimum of 6 years of experience across portfolio management, corporate finance, investment banking, or project finance, including ownership of fundings and other related workflows., • Experience onboarding deals, managing portfolio-related transactions, and working with credit agreements, LLC agreements, and other transaction documents. Paralegal experience in such a setting is a plus., • Direct experience executing capital raises at the corporate level and administering those vehicles after close (corporate credit facilities, holdco debt, or equity financings)., • Advanced financial modeling skills, including extensive experience working in models covering sources and uses, liquidity, and covenant compliance., • FP&A experience (budgeting, forecasting, and variance analysis) with the ability to turn results into recommendations senior management can act on., • Hands-on experience with the operating phase of infrastructure or real assets, including covenant and DSCR compliance testing, distributions, and lender reporting, is a plus., • Demonstrated ability to lead complex processes and direct resources across multiple teams and third-party providers, with minimal oversight., • Experience mentoring, reviewing the work of, or supervising junior team members., • Strong organizational, communication, and problem-solving skills., • Experience in renewable energy, particularly solar and storage, strongly preferred. Location: This is a full-time, hybrid position based out of Soltage headquarters in Jersey City, New Jersey. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. ‍PROTECT YOURSELF FROM FRAUD Please be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Assistant Estimator Project Manager CMA is seeking Assistant Estimator Project Manager for various construction projects from conception through completion in New York City and the surrounding boroughs. Compensation will be commensurable with the applicant’s experience. Responsibilities: • Perform take offs, create and issue bid packages, and maintain the bid list, • Create comprehensive cost estimates for a wide variety of construction projects, • Visit potential sites for suitability and associated cost, • Verify vendor and subcontractor estimates fall within the defined scope, • Assist the Project Manager by compiling all the information required to make award recommendations., • Work with the estimating and project team to buy-out the Construction Trades., • Review and comment on scopes and bid proposals, • Prepare and manage Letters of Recommendation and Letters of Intent, • Work with the PM to compose and issue meeting minutes for sub, OAC, field meetings., • Obtain and analyze proposals from subcontractors for potential changes and change orders Qualifications: • Bachelor's degree in a relevant field preferred, but not required, • 1-3 years of full-time experience as a technical specialist in one or more construction and design related fields, • Must be proficient in typical construction project software including MS Office, Project, Blue Beam and Procore, • Familiarity with construction practices, costs, and procedures. Must possess unquestionable personal integrity and a superior reputation. Job Type: Full-time Salary: $60,000.00 - $120,000.00 per year Benefits: • 401(k), • Dental insurance, • Health insurance, • Schedule:, • Monday to Friday, • Experience:, • Project management: 1 year (Preferred), • Work Location: Multiple Locations

Civil/Structural Project Engineer – Solar & Battery Storage Company Overview: Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. Position Description: Soltage is seeking an experienced Civil/Structural Project Engineer to own civil, structural, and site civil engineering for our standalone battery energy storage (BESS) and solar-plus-storage projects, from design review through construction and commissioning. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. Job Responsibilities: • Support civil and structural design for utility-scale BESS, solar PV, substation, and balance-of-plant (BOP) infrastructure across North America., • Lead technical review of civil and structural deliverables, including grading, drainage, stormwater, foundations, equipment support structures, retaining systems, access roads, underground utilities, cable trenches, and erosion and sediment control., • Conduct site visits for field investigations, constructability reviews, geotechnical observations, and foundation and civil infrastructure inspections., • Develop and review engineering calculations, specifications, construction drawings, and submittals for compliance with project requirements and design standards., • Serve as the primary technical point of contact for civil and structural matters from detailed engineering through closeout, and oversee external engineering consultants., • Review vendor foundation and wall designs, equipment loads, seismic criteria, and installation requirements for BESS containers, inverters, transformers, switchgear, and substation equipment., • Support RFPs, EPC bid evaluations, engineering estimates, and value engineering., • Resolve RFIs, NCRs, field design changes, and construction issues with contractors to minimize schedule and cost impacts., • Verify completion of civil and structural work during commissioning and support mechanical completion and turnover. Experience and Education Requirements: Required qualifications: • Bachelor’s degree in engineering required (Civil Engineering preferred)., • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members., • Highly organized and self-directed; able to manage multiple projects under tight deadlines., • Minimum of 3 to 5 years of project or field engineering experience on urban civil construction projects supporting electrical generation or utility equipment., • Strong knowledge of civil and structural engineering for utility-scale BESS, solar PV, substations, and high-voltage infrastructure, including applicable North American codes and standards., • Working knowledge of structural steel, reinforced concrete, shallow and deep foundations, equipment anchorage, seismic and wind loading, retaining and fire/noise-rated walls, duct banks, and cable trenches., • Working knowledge of site development (grading, drainage, stormwater, erosion control, access roads) and geotechnical principles (bearing capacity, settlement, slope stability, liquefaction)., • Experience coordinating with EPC contractors, equipment manufacturers, utilities, Owner’s Engineers, and regulatory agencies., • Familiarity with construction QA/QC documentation, including RFIs, submittals, ITPs, NCRs, punch lists, and as-builts., • Familiarity with construction sequencing, heavy equipment installation, crane planning, and contractor means and methods., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook). Preferred qualifications: • New York State Engineer in Training (EIT) certification., • Experience with construction management and scheduling software such as Procore or Primavera P6., • Familiarity with AutoCAD / Civil 3D. Location: This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, New Jersey. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “Civil Engineer” as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. ‍PROTECT YOURSELF FROM FRAUD Please be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Hope you are doing well! Superintendent - Civil Construction LOCATION: Newark, New Jersey COMPANY: Civil Construction POSITION SUMMARY: Responsible for planning, coordinating, and supervising all station architectural and finish work associated with major transportation infrastructure projects. Provides daily field leadership for interior station construction activities, including finishes, architectural systems, specialty installations, and final turnover. Works closely with project management, subcontractors, owners, consultants, and inspection agencies to ensure all work is performed safely, on schedule, within budget, and in accordance with contract requirements. The ideal candidate will have extensive experience managing station finishes on transit, rail, airport, or large commercial construction projects in New York City. POSITION DESCRIPTION: · Coordinate daily work with MEP, systems, structural, and civil construction teams. · Manage and supervise all station finish activities from rough-in through final completion. · Develop and manage short-term look-ahead schedules for station finish activities. · Lead subcontractor coordination meetings and daily field activities. · Monitor manpower levels, production rates, and subcontractor performance. · Maintain project schedule milestones and implement recovery plans when required. · Conduct regular quality-control inspections and ensure compliance with project standards. · Verify completion of testing, closeout documentation, and as-built requirements. REQUIREMENTS: · Minimum 12 years of Superintendent/supervisory experience, preferably with a General Contractor · Experience on transit, railroad, airport, transportation, infrastructure, or large commercial projects. · Strong knowledge of station architectural systems and finish sequencing. · Working knowledge of NYC construction practices, quality standards, and inspection requirements. · Experience coordinating union labor and multiple subcontractors. · Experience on MTA, Port Authority, Amtrak, NYC Transit, LIRR, NJ Transit, or airport projects. · OSHA 30 Certification. · NYC SST Supervisor Card. · Experience with phased construction and maintaining operations in active transportation facilities. · Knowledge of ADA requirements and public-facing infrastructure environments. Thanks and Regards, Mamta Giri | Lead Recruiter | KPG99, INC Direct: 609-681-2599 | mgiri@kpgtech.com _ EXT, Hamilton, NJ 08619 |

About the Role Senior Talent Sourcer - Engineering & Infrastructure Location: Elizabeth, NJ (Onsite) Engagement: 12-Month Contract Position Overview Seeking an experienced Talent Sourcer to support hiring for a large-scale infrastructure and capital projects initiative. This role will focus on identifying, engaging, and building pipelines of specialized engineering, construction, project management, asset management, and HSSE talent. This is a sourcing-focused position ideal for someone who enjoys market research, passive candidate engagement, talent mapping, and developing creative sourcing strategies for hard-to-fill technical roles. Responsibilities • Lead sourcing efforts for engineering, construction, project controls, asset management, and HSSE positions., • Build talent maps, target company lists, and competitor intelligence across infrastructure, transportation, utilities, energy, manufacturing, and EPC/EPCM sectors., • Execute advanced sourcing strategies utilizing LinkedIn Recruiter, Boolean search, referrals, professional associations, and industry networking., • Identify and engage passive candidates through targeted outreach campaigns., • Partner with hiring leaders to align sourcing strategies with business needs., • Provide market intelligence, compensation insights, and talent availability updates., • Maintain candidate pipelines and sourcing activity within the ATS., • Develop sourcing playbooks, talent communities, and best practices to support ongoing hiring efforts. Qualifications • 5+ years of sourcing, recruiting, executive search, or talent acquisition experience supporting technical or difficult-to-fill positions., • Proven success identifying and engaging passive candidates., • Strong expertise with LinkedIn Recruiter, Boolean search, talent mapping, and market research., • Experience building sourcing strategies for engineering, construction, infrastructure, industrial, or project-based hiring., • Ability to work independently and manage multiple priorities in a fast-paced environment., • Experience with Workday or a similar ATS preferred. Required Skills • Sourcing, recruiting, executive search, or talent acquisition for technical or difficult-to-fill positions., • Identifying and engaging passive candidates., • LinkedIn Recruiter, Boolean search, talent mapping, and market research., • Developing and executing sourcing strategies for engineering, construction, infrastructure, industrial, or project-based hiring., • Working independently and managing multiple priorities in a fast-paced environment., • Using Workday or a similar ATS (preferred). Preferred Skills Preferred Industry Experience • Heavy Infrastructure, • Civil Engineering, • Construction, • Transportation, • Utilities, • Energy, • Ports & Terminals, • EPC/EPCM, • Industrial Manufacturing, • Capital Projects Why This Opportunity • Support a high-profile infrastructure investment program., • Partner directly with engineering and project leadership teams., • Influence hiring strategy through talent intelligence and market insights., • Build long-term talent pipelines and sourcing strategies., • Focus on strategic sourcing and passive candidate generation. Pay range and compensation package Compensation & Benefits • $45-$55/hour, • 12-month contract opportunity, • Exposure to a large-scale infrastructure and capital projects initiative, • Direct partnership with engineering, construction, and project leadership teams, • Opportunity to develop talent intelligence, market mapping, and sourcing expertise in a complex technical environment, • Collaborative, fast-paced environment with high visibility and impact, • Benefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and 401K plan., • Our program provides employees the flexibility to choose the type of coverage that meets their individual needs., • Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Work Environment • This is an onsite position based in Elizabeth, New Jersey., • Candidates must be able to work onsite regularly and collaborate closely with project stakeholders and hiring leaders., • Occasional travel may be required based on business needs. Equal Opportunity Statement The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Military connected talent encouraged to apply

Company Description Thomas J. Mesuk – Architect is a full-service architectural and interior design firm founded on the principle of providing focused, personal attention to every client and project. Located in Wood-Ridge, New Jersey, just west of New York City, the firm is a registered Small Business Enterprise with the State of New Jersey and listed with the Better Business Bureau. The practice delivers a wide range of work, including professional offices, commercial retail and restaurants, hospitality spaces, custom residential projects, and municipal architecture. Services span site and building analysis, energy and code compliance, design and construction documentation, interior design, bidding and cost analysis, construction administration, LEED consulting, historic preservation, and specification writing. Team members work on projects that balance design quality, technical rigor, and client satisfaction. Role Description The Intermediate Architect will work on-site in Wood-Ridge, NJ in a full-time capacity, contributing to projects from concept through construction. Day-to-day responsibilities include assisting with architectural design, preparing drawings and construction documents, and supporting feasibility studies, site and building analysis, and code and ADA compliance reviews. The role involves coordinating with consultants, contractors, and clients, participating in design development, and helping manage project schedules and documentation. The Intermediate Architect may also support interior design tasks, preparation of models and renderings, and LEED and historic preservation efforts as needed. This position requires a balance of creative design thinking, technical accuracy, and effective collaboration in a small-firm environment. Qualifications • Strong skills in Architecture and Architectural Design, including experience with building planning, detailing, and documentation., • Experience with Software Development and Integration related to architectural tools (e.g., BIM and CAD platforms, design/visualization software)., • Demonstrated Project Management abilities, including organizing tasks, tracking milestones, and coordinating with project stakeholders., • Proficiency in industry-standard design software (such as AutoCAD, Revit, SketchUp, or similar) and familiarity with building codes, ADA, and energy code compliance., • Professional degree in Architecture (B.Arch or M.Arch) and progress toward or interest in architectural licensure., • Strong communication and collaboration skills, with the ability to work independently and within a small team setting., • Experience with commercial, residential, or municipal projects and interest in LEED and historic preservation is beneficial. Please send PDF resume only to tom@tjmarchitect.com No recruiters please.

About our client Our client is a well-established, vertically integrated real estate investment firm headquartered in New York City, focused on multifamily housing across the United States. They invest through both equity and credit and partner with developers and general contractors on ground-up residential projects. The construction team is small and senior, and this hire will be the firm's eyes and ears on site. The role This is an owner's representative position overseeing two or more ground-up multifamily development across NJ/NY You'll represent ownership on both jobs, holding the general contractor to budget, schedule and quality. There is an office base, but most of your time will be spent in the job trailer and on site, so this suits someone who wants to stay close to the work rather than manage it from a desk. Responsibilities On site and project oversight • Act as the owner's representative on two active ground-up multifamily projects, spending the majority of the week on site, • Walk the work regularly and verify reported progress against what's actually in place, • Attend OAC meetings and hold the GC, design team and consultants to their commitments, • Review GC baseline and updated schedules, logistics plans, sequencing and buyout, and challenge assumptions that put milestones at risk, • Monitor quality of work on both projects and raise deficiencies with the GC before they're covered up, • Track punch list, commissioning, TCO/CO and closeout through to final turnover Cost control • Review monthly GC pay applications and draw requests against the schedule of values and work in place before recommending release of funds, • Evaluate every change order for entitlement, pricing and schedule impact, and recommend a position to ownership, • Monitor contingency, allowances and exposure, and keep a projected cost at completion for each project, • Coordinate with lender inspecting engineers and third-party consultants on draw inspections and reporting Risk and escalation • Identify cost, schedule, quality and contractor performance risk early and escalate with a recommended course of action, • Check contractor insurance, bonding and compliance as required under the construction agreements, • Support resolution of disputes, delay claims and scope disagreements between the GC, developer partners and design team Reporting and wider support • Report regularly to leadership on budget, schedule, risk and contingency across both projects, • Maintain construction reporting for internal stakeholders and, where needed, lenders and joint venture partners, • Provide construction input on new acquisitions and developments, including budget and schedule review, contractor assessment and constructability

Position Description: Asset Manager Company Overview: Soltage is an independent power producer (IPP) and a leader in the development, financing, and operation of distributed scale solar and storage assets for commercial, industrial, municipal, and utility customers across the United States. We develop, finance, own and operate our assets for their full operating life. Soltage has developed more than 150 solar energy projects to date, with more than 600 MW total distributed generating capacity in operation or under construction, and has invested over $1.7 Billion to date into the US clean energy sector. Position Description: Soltage is seeking an experienced Asset Manager to take full ownership of a dedicated book of solar and storage assets across every stage of the asset management lifecycle, from onboarding during construction through the full course of operations. The Asset Manager is accountable for their portfolio of assets, ensuring that each project's revenue and expenses stay aligned with approved budgets, and serves as the first line of defense in spotting and managing the profitability of the assets. The Asset Manager works closely with Project Management, Engineering, and Operations to usher each asset through construction and into commercial operation, including applying for and securing applicable grants and incentives and ensuring revenue contracts are in place at the Commercial Operation Date (COD). The role also carries ongoing responsibility for tracking compliance, rebate and subscription programs across the portfolio. This role requires a working command of the power and environmental commodity markets in which Soltage’s assets operate, strong Excel and financial analysis skills, and the judgment to think like an owner and arrive with well-formed recommendations. Job Responsibilities: ● Own the full asset management lifecycle for a dedicated portfolio of approximately 40–50 MW of solar and storage assets, beginning with onboarding during construction and continuing through commercial operation and steady-state performance ● Lead the onboarding of newly financed solar and storage assets during construction, coordinating with Accounting, Project Management, Engineering, and Operations to track key milestones, documents, and data needed for a smooth transition into commercial operation ● Own the Commercial Operation Date (COD) process for assigned assets, including applying for and securing applicable grants and incentives, confirming that offtake agreements and arrangements are properly executed and in place, and ownership of all compliance related items ● Serve as the point of accountability for the financial and operational performance of assigned assets, ensuring revenue and expenses stay aligned with approved budgets and owning associated outcomes ● Act as the first line of defense in spotting and managing the profitability of each asset, using strong Excel and financial analysis skills to turn underlying data into a clear, current view of performance ● Track and interpret developments in the power, capacity, and environmental commodity markets relevant to the portfolio, and adjust strategy and recommendations as market conditions shift ● Lead variance analysis against approved budgets, diagnosing root causes and driving the corrective actions needed to protect and grow profitability ● Track and manage rebate and subscription programs (e.g., net metering, community solar subscriptions, and state or utility incentive programs) across the portfolio, ensuring filings and renewals stay current ● Own day-to-day compliance for assigned assets, partnering with Legal on contractual, regulatory, and reporting obligations ● Track O&M provider and counterparty performance against the cost and performance assumptions underlying each asset's approved budget, flagging variances to the responsible owner ● Manage the commercial terms of contracts affecting asset performance, bringing a point of view and a recommendation rather than simply flagging an issue ● Present asset and portfolio performance - including key drivers, risks, and opportunities - to internal leadership, backed by analysis ● Lead process improvements that strengthen how the Asset Management team tracks and manages portfolio performance ● Mentor and provide guidance to Junior Asset Managers ● Perform additional responsibilities as assigned Experience and Education Requirements: ● Bachelor’s degree in Finance, Business, Economics, Engineering, or a related field ● 3–7 years of experience in asset management, portfolio management, corporate or project finance within the renewable energy, power, or infrastructure sector, with direct, hands-on ownership of asset-level financial performance ● Strong Excel and financial analysis skills, with the ability to quickly diagnose the drivers behind a project's revenue, expenses, and profitability ● Strong understanding of the power, capacity, and environmental commodity markets relevant to Soltage’s portfolio, and the ability to translate market developments into financial and commercial strategy ● Working knowledge of project financing structures (tax equity, partnership flips, inverted leases, non-recourse debt) and comfort navigating transaction and financing documents ● Comfort managing cross-functional workstreams with Project Management, Engineering, Operations, and Legal, particularly during an asset's transition from construction to commercial operation ● Demonstrated ability to independently own and manage a multi-asset portfolio (40+ MW) with minimal oversight, driving outcomes rather than escalating them ● Strong commercial judgment and negotiation skills, with experience managing counterparties and contracts ● Excellent written, verbal, and presentation skills, with the ability to represent portfolio performance and strategy to internal leadership ● Familiarity with rebate, incentive, or compliance program administration (e.g., net metering, community solar, state or utility incentive programs) is a plus ● Experience in renewable energy, particularly solar and storage, is a strong plus Location: This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, New Jersey. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with "Asset Manager" as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. PROTECT YOURSELF FROM FRAUD Please be aware that Soltage emails will always come from the "@soltage.com" domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Entry-Level Recruiter / Sales – NYC & North Jersey We’re partnering with a growing staffing and recruiting company that is hiring early-career talent for its teams in New York City and North Jersey. The company works across construction, engineering, design, environmental, life sciences, skilled trades, and other technical industries. They’re looking for competitive, driven people who want to build a long-term career in recruiting, sales, account management, and leadership. This is a great fit for former college or professional athletes, recent graduates, and people who have succeeded in competitive, customer-facing, hospitality, coaching, construction, or other high-energy environments. What You’ll Do You’ll start on the recruiting side of the business and learn how to: • Source and identify qualified candidates, • Make high-volume outbound calls and build relationships, • Conduct candidate interviews and screenings, • Manage follow-up and maintain an active recruiting pipeline, • Learn the industries and clients the company supports, • Work closely with Account Managers to understand client hiring needs, • Develop the sales, communication, and relationship-building skills needed to grow into a client-facing role The role can involve up to 50 outbound calls per day and is best suited for someone who is comfortable with activity, rejection, follow-up, and consistent effort. Career Growth There is a clear long-term path: Recruiter → Account Manager → Division Manager As you prove yourself, you can take on more responsibility in account management, client development, business development, and eventually leadership. This is an opportunity to learn the staffing business from the ground up and grow into a sales and leadership career. What They’re Looking For • Competitive, disciplined, and coachable, • Strong communication skills, • Comfortable talking to people throughout the day, • Willing to make outbound calls and handle rejection, • Consistent and process-driven, • Motivated by performance and career growth, • Comfortable working in a fast-paced environment, • Former college and professional athletes are strongly encouraged to apply, • Prior recruiting or sales experience is not required Compensation • $50,000 base salary, • Uncapped commission, • Approximately $60,000–$65,000 first-year earning potential, • Opportunity to grow toward $80,000+ as you progress Benefits • Healthcare, • Paid time off, • Training and mentorship, • Long-term growth opportunity Location 5 days per week in office Openings in: • New York City, • West Caldwell, NJ If you’re early in your career, competitive by nature, and looking for a place where performance can lead to real career growth, we’d like to hear from you.

Company Description David Donahue, founded in 1972, is a leading updated traditional lifestyle brand recognized for its accessible luxury and impeccable quality. The company began as a jewelry brand and has grown into a full range of dress shirts, neckwear, tailored clothing, sport shirts and more. Still owned and operated by the Donohue family, David Donahue combines heritage craftsmanship with modern design sensibilities. The brand focuses on refined, quality-driven apparel that appeals to customers seeking classic style with contemporary details. Team members join a close-knit organization that values integrity, collaboration, and excellence in product development. We are seeking an Assistant Technical Designer for a new role focusing on men’s apparel. This role is based in New York City and is in-person five days a week Role Description The Assistant Technical Designer will collaborate with the design, product development, and production teams to assist in creating and developing technical packages and specifications for new products. The Assistant Technical Designer will also assist in fittings and scheduling and will be responsible for ensuring that all garments are in compliance with quality standards and production timelines. Overview • Measure and evaluate garment samples, • Assist with live model and mannequin fittings, • Organize and track fit samples, • Take detailed fit notes during fittings, • Upload fit photos and update tech packs, • Support Technical Designers throughout development and production, • Collaborate closely with Design, Sales, Pre-Production, and Production teams, • Help ensure garment fit, construction, and quality standards are maintained Qualifications • Degree in fashion design, technical design, or related field, or equivalent experience, • Excellent communication, organizational, and problem-solving skills, • Experience with garment fittings, construction techniques, and patternmaking, • Detail-oriented with the ability to multitask in a fast-paced environment, • Team player with a positive attitude and willingness to learn, • Proficiency in Microsoft Office (Excel, Outlook, PowerPoint), • Knowledge of tech packs and garment construction, • Strong attention to detail and ability to maintain accuracy, • Experience working with a diverse team and adapting to new technologies and systems Salary starting at $65,000

Job Description We are seeking a highly skilled and motivated MSP Technician to join our dynamic team. In this role, you will be responsible for overseeing the day-to-day operations of our work stations and systems infrastructure, ensuring its smooth functioning, and implementing best practices for efficient performance. You will collaborate closely with cross-functional teams to support our clients' infrastructure requirements and deliver exceptional service. In addition to the maintenance and day-to-day operations, the MSP Technician will also play a crucial role in infrastructure upgrades and construction build-outs of new data centers. You will collaborate with project teams to plan, design, and implement data center expansions and enhancements, ensuring scalability, reliability, and adherence to industry standards. Responsibilities: · Manage, configure, and security patch the company work stations, networks, and related hardware and software systems. · Monitor system performance, identify potential issues, and implement necessary improvements to ensure optimal uptime and efficiency. · Oversee data backups and disaster recovery plans to safeguard critical information. · Provide high-level technical support and troubleshoot IT-related issues for attorneys and staff. · Ensure compliance with industry best practices, data privacy regulations, and security standards. · Collaborate with external vendors and service providers to address IT-related matters. · Conduct regular system audits and implement security measures to protect against cyber threats. · Assist in the deployment and management of legal software applications and tools. · Create and maintain technical documentation, manuals, and guidelines for end-users. · Proactively research and recommend innovative IT solutions to enhance productivity and streamline processes. · Stay informed about emerging technologies and trends in the legal tech industry. Job Type: Full-time Pay: $40,000.00 - $75,000.00 per year Benefits: • 401(k), • Dental Insurance, • Health insurance, • Life insurance, • Parental leave, • Vision insurance Experience level: • 4 years Schedule: • 8-hour shift Ability to commute/relocate: • Jersey City, NJ 07302: Reliably commute or planning to relocate before starting work (Required)

We are seeking a dynamic, results-driven Inside Sales Representative (ISR) to join our growing Industrial Sales team. The ideal candidate brings a proven track record in equipment finance coupled with hands-on experience in the construction, machine tool, material handling, or packaging sectors. Operating as a pivotal account manager and program manager, you will play a critical role in cultivating, servicing, and expanding relationships with new vendors, dealers, and commercial customers stemming from our active business development pipeline. The ISR reports directly to the Head of Sales – Industrial and is based in our Jersey City, NJ office. Essential duties and responsibilities • Drive Profitable Performance: Originate transactions with assigned vendors and actively prospect to secure new customer and dealer relationships., • Manage Key Accounts: Serve as the primary point of contact and dedicated program manager for designated vendor accounts, ensuring exceptional service delivery., • Deliver Partner Value: Design tailored financial solutions that create measurable value for our vendor partners and customers while consistently achieving corporate financial targets., • Analyze & Forecast: Provide accurate monthly sales forecasts and maintain meticulous pipeline records within Salesforce., • Structure & Close Deals: Price, structure, and close transactions, including the pre-screening of customer financial applications prior to credit submission., • Collaborate with Field Sales: Provide strategic support to the Field Sales team on credit submissions, documentation requests, and funding processes., • Streamline Processes: Partner with cross-functional teams to optimize program execution and participate in strategic initiatives aimed at continuous process improvement. Qualifications • Industry Experience: Minimum of 5 years of successful sales experience within the leasing and equipment finance sector., • Academic Background: Bachelor’s degree in finance, business, or a closely related field., • Financial Expertise: In-depth, functional knowledge of commercial leasing/lending products, structures, processes, and industry-standard tools., • Industry Credibility: A demonstrated history of successfully growing and nurturing vendor relationships within the construction, machine tool, material handling, or packaging industries., • Credit & Structuring Acumen: Robust command of credit analysis, lease/loan documentation, and a clear understanding of risk-versus-return dynamics., • Solution-Oriented Structuring: Proven ability to structure both standard and highly complex financial transactions., • Technical Proficiency: Functional expertise in Salesforce (CRM) and TValue., • Relationship & Influence: Exceptional relationship-building, communication, and interpersonal skills, with a natural ability to motivate and influence stakeholders., • Agility & Drive: Strong problem-solving abilities, sharp attention to detail, and the capacity to thrive in a high-productivity, fast-paced commercial environment., • Mobility: Willingness to travel as needed for client meetings, key industry events, and conferences. What We Offer BPCE Equipment Solutions offers a collaborative, professional, and supportive working environment where your contributions are directly felt. We offer competitive compensation, comprehensive benefits, and a dynamic office environment in vibrant Jersey City. The salary range for this position will be between $100,000 - $120,000. We are required by law to include a reasonable estimate of the compensation range for this role. Actual base salary will vary and will be based on several factors including, but not limited to, relevant experience, education, skills set, applicable licensure and certifications, and other business and organizational needs. Base salary is only one component of our total rewards package. BPCE Equipment Solutions also offers a generous benefits package, and you may be eligible for a discretionary incentive award depending on company and individual performance

$50 - $80/hourpayBuilding code knowledgePlan review and blueprint readingmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Building Code Compliance Expert Job Type: Contractor Location: Remote (US only) Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input related to building codes, permitting, inspections, and construction compliance. Key Responsibilities: • Conduct reviews of architectural and engineering plans to assess building code compliance., • Interpret blueprints, permit documents, zoning requirements, and construction documentation., • Analyze code-related scenarios and provide clear compliance reasoning and recommendations., • Identify permitting issues, code violations, and regulatory concerns across residential and commercial projects., • Collaborate with architects, engineers, contractors, inspectors, and permitting teams to resolve compliance questions., • Deliver clear written reports and explanations related to code interpretation and compliance findings., • Support AI training projects by providing accurate, real-world building compliance expertise. Required Skills and Qualifications: • Demonstrated experience in building codes, permitting, inspections, zoning, or plan review., • Strong ability to read and interpret construction drawings and technical documentation., • Experience working with residential and/or commercial construction projects., • Strong analytical, problem-solving, and communication skills., • Ability to work independently and remotely while managing multiple assignments., • Experience collaborating with cross-functional project teams. Preferred Qualifications: • Relevant certifications such as ICC, NFPA, or state-issued licenses., • Experience working with city/county building departments or municipal permitting offices., • Experience in code enforcement, plan review, virtual inspections, or compliance consulting., • Background in architecture, engineering, construction management, or land use development.

Job Description A nationally recognized, fast-growing boutique law firm is seeking an experienced Real Estate Litigation Paralegal to join its team in Northern New Jersey. This is an excellent opportunity for a seasoned paralegal who wants to work on sophisticated commercial real estate matters while having meaningful ownership and autonomy in their work. The firm has a strong reputation in the commercial real estate and construction industries and offers an entrepreneurial, collaborative environment where responsiveness and excellence are highly valued. What You'll Do • Manage multiple commercial real estate matters and transactions from inception through closing, • Prepare and review contracts, leases, title reports, closing documents, and other real estate documentation, • Coordinate with attorneys, clients, lenders, and title companies to keep transactions moving efficiently, • Conduct due diligence, including title searches, survey reviews, and zoning research, • Support real estate and construction litigation matters, including document management and case organization, • Work closely with attorneys and clients on complex and time-sensitive matters What We're Looking For • 7+ years of commercial real estate paralegal experience, • Strong experience managing multiple transactions and deadlines simultaneously, • Solid knowledge of commercial real estate documentation, title insurance, and closing processes, • Excellent organizational and project management skills, • Strong attention to detail and ability to work independently, • Experience supporting real estate or construction litigation is highly valued, • Ability to work 4 days per week in the firm's Newark, NJ office, with 1 day remote Why This Is a Great Opportunity • $90K–$110K base salary, • Work alongside attorneys handling sophisticated commercial real estate and construction matters, • Join a growing boutique firm where your experience and judgment will have a real impact, • Greater autonomy and ownership than typically found in larger law firms, • Opportunity to work directly with attorneys, clients, lenders, and other key stakeholders, • Hybrid flexibility with one remote day per week, • Convenient Northern New Jersey location for professionals commuting from Jersey City, Newark, and surrounding areas

Job DescriptionPlease do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking an experienced HVAC Pipefitter to join our team. In this role, you will build and maintain pipe systems in both residential and commercial settings. You will read blueprints, plan installations, and prepare pipes. The ideal candidate is analytical, with attention to detail and experience with pipes of a variety of materials. VRV/VRF a PLUS! Responsibilities • Review and interpret blueprints to understand project requirements, • Braze/solder copper parts and components using ASME brazing techniques, • Able to install, service, and repair water source heat pump systems, • Installation, repair, and maintenance of refrigeration systems, with particular expertise in handling the intricate network of pipes that carry refrigerants, • Inspect and prepare sites for construction operations, • Assemble and install piping systems such as ductile iron, PVC and steel, copper, • Test system functionality, • Repair any leaks or malfunctions, • Use a variety of hand and power tools, • Work with other construction professionals to complete projects, • Follow all relevant safety guidelinesQualifications, • Previous experience as a HVAC Pipefitter is preferred, • Strong mathematical and problem-solving skills, • Attention to detail, • Knowledge of all relevant health and safety guidelines, • Excellent communication skills, • Ability to meet the physical demands of the position, including lifting heavy objects, • Ability to work overtime when required

Job Description We are seeking an attorney with five (5) years experience to handle auto accident and premises liability cases from inception through trial. The attorney will be responsible for managing an active caseload. This role requires being a member in good standing with the New Jersey Bar with at least 5 years of liability litigation experience and the ability to manage cases, conduct depositions, attend court appearances, negotiate settlements, and prepare cases for trial. Responsibilities include: • Handle auto and premises liability matters from inception through trial., • Draft pleadings, discovery, motions, and legal correspondence., • Conduct depositions and prepare clients and witnesses., • Attend court conferences, arbitrations, mediations, and trials., • Negotiate settlements with insurance carriers and defense counsel., • Work directly with assigned paralegal to move files efficiently., • Maintain accurate case notes, deadlines, and litigation strategy. Qualifications: • Minimum 5 years of experience., • Experience with auto accident and premises liability cases., • Trial experience or significant trial-preparation experience., • Strong litigation, negotiation, writing, and client communication skills., • Must be able to work in-office five days per week in Newark, NJ.\nCompany Description Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need. Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need.

Job Description We are looking to hire a Law Clerk with superb research and organizational skills. Law Clerks are expected to have an outstanding comprehension of existing law in order to clearly articulate legal information. To ensure success, Law Clerks should be critical thinkers and have exceptional writing skills with a keen interest in fashioning credible legal reports to support lawyers. Top candidates will display precision and accuracy with fantastic time management and listening skills. Law Clerk Responsibilities: • Assist and counsel lawyers on their primary duties., • Interpret laws, rulings and regulations for specific cases., • Conduct extensive legal researching and analysis., • Prepare memoranda and briefs with accurate information on specific cases., • Provide assistance prior and during a court proceeding by preparing for a case and examining the related legal documents., • Ensure that related case documents are properly ordered and available., • Attend court sessions in order to listen to and record critical information., • Maintain and update law libraries, literature and documentation., • Coordinate and schedule appointments and meetings. Law Clerk Requirements: • Excellent interpersonal and writing skills., • Fantastic document management skills., • Organized with strong conceptual and research skills., • Critical thinker who displays accuracy and attention to detail., • Excellent comprehension of the law., • Ability to work under pressure and meet deadlines., • Ability to work independently and as part of a team.\nCompany Description Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need. Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need.

Job Description About Us The Ginarte Law Firm is a respected personal injury law firm dedicated to advocating for individuals who have been injured due to the negligence of others. We are committed to providing exceptional client service and achieving the best outcomes for our clients. We are looking for a bilingual (Spanish/English) Entry-Level Legal Assistant to join our team and support our growing client base. Position Overview This is an excellent opportunity for someone passionate about helping others and interested in a career in the legal field. The ideal candidate will have strong communication skills in both Spanish and English and a willingness to learn and grow in a fast-paced environment. Key Responsibilities • Provide administrative support to attorneys and paralegals, including scheduling appointments, managing calendars, and organizing case files., • Communicate with clients in both Spanish and English, ensuring they are informed and supported throughout their case., • Handle incoming and outgoing correspondence, including phone calls, emails, and letters., • Translate documents and conversations accurately between Spanish and English as needed., • Assist in preparing legal documents, such as forms, affidavits, and correspondence. What We Offer • A competitive entry-level salary., • Comprehensive training and professional development opportunities., • A supportive and inclusive work environment., • Opportunities for career growth within the firm.\nCompany Description Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need. Well established personal injury law firm represent clients throughout the New York and New Jersey metro area with offices conveniently located in Manhattan, Queens, Newark, Union City, Elizabeth, Clifton, New Brunswick and Perth Amboy. Our team of 35 attorneys concentrates on a variety of legal matters, including personal injury, construction accidents, workers compensation, car accidents, truck accidents, premises cases, medical malpractice and Social Security Disability. With this wide skill-set, and years of experience backing us, we are equipped to provide you with the knowledgeable and professional legal advice you need.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Electrical / Fire Alarm Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop electrical designs from architectural backgrounds, project criteria, and direction from AEP, • Develop electrical power distribution systems, including service, feeders, panelboards, transformers, disconnects, and branch circuits, • Perform electrical load calculations and service/load assessments, • Develop power plans and equipment connections, • Develop lighting and lighting-control designs where included in project scope, • Develop emergency and egress lighting systems, • Prepare electrical riser and single-line diagrams, • Size feeders, branch circuits, overcurrent protection, and related distribution equipment, • Create panel board schedules, • Coordinate electrical requirements for mechanical, plumbing, fire-protection, architectural, and specialty equipment, • Develop fire alarm system designs, layouts, riser diagrams, device requirements, sequences, notes, and specifications, • Prepare electrical and fire alarm plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop a coordinated electrical and fire alarm design without requiring every receptacle, circuit, panel, feeder, fire alarm device, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing electrical systems for buildings, • Professional experience designing fire alarm systems, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Experience with electrical load calculations and power-distribution design, • Knowledge of service sizing, feeders, panelboards, transformers, branch circuits, grounding, and overcurrent protection, • Knowledge of lighting, emergency lighting, and basic lighting-control requirements, • Working knowledge of fire alarm system design, notification, initiation, supervision, interfaces, and applicable code requirements, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the NEC, IBC, NFPA 72, applicable energy-code requirements, and the NYC Building and Electrical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • Familiarity with NYC fire alarm requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing electrical services, distribution equipment, panels, transformers, lighting, fire alarm equipment, devices, and related building conditions, • Taking field measurements, photographs, panel information, equipment information, and existing load data, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of electrical design experience do you have?, • How many years of fire alarm design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop electrical and fire alarm designs from architectural backgrounds and project criteria?, • How familiar are you with the NEC, NFPA 72, and NYC electrical/fire alarm requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description 26-05R – CONSTRUCTION SAFETY SPECIALISTS Request for Resumes – (3) Construction Safety Specialists October 2026 Three (3) Year Term 2 Positions @ 241 Erie Street, Jersey City, NJ 07310 and 1 Position @ 4 World Trade Center, 150 Greenwich Street, New York, NY 10007 OVERVIEW Under the direct Supervision of the Construction Management Division, to support the Port Authority Office of Safety Management, the selected candidate shall perform technical and administrative duties essential to ensure that contractors conduct activities in compliance with all Federal, State and Local fire and safety regulations and standards to eliminate hazardous practices and conditions, and also ensuring fire safety programs and standards are properly adhered to at the Port Authority and Leaseholder construction sites. RESPONSIBILITIES • Review contracts, drawings, and project-related documentation to ensure adherence., • Ensure contractors are in compliance with OSHA, FDNY, NYCDOB, Local laws and all applicable regulations., • Review contractor Health and Safety Plan submittals., • Audit work operations and construction processes to ensure they conform to Health & Safety Programs, Job Hazard Analysis, Contract drawings, approved plans and all accepted safety procedures., • Monitor work conditions, operations, practices, construction equipment and processes to evaluate effectiveness, adherence with accepted programs, required regulations, and alignment with all applicable safety policies., • Provide Port Authority with daily reports to include photos and detailed account of safety observations, findings, safety deficiencies, and corrective measures., • Conduct Accident, Incident and near miss investigations, root cause analysis and make recommendations to prevent recurrences., • Provide Port Authority with Preliminary Information Reports on accident and incident investigation information., • Interact & collaborate with Port Authority Resident Engineers, Agency Safety Representatives, Integrity Monitors, Stakeholders, insurance brokers, and affiliated representatives. Requirements REQUIREMENTS • The successful candidate will also be subject to a comprehensive background check, must pass a fingerprint based criminal history records check in order to obtain an airport Security Identification Display Area (SIDA) credential. The candidate must be able to maintain SIDA credentials throughout your employment in this position., • The candidate will be expected to conduct comprehensive site audits throughout all construction projects throughout the agency., • The position is a field position that requires working in all types of weather., • The position requires the candidate to be capable of walking, navigating and accessing all points of a vast, active and dynamic construction site for extended periods of time through most of the day. The position will require climbing various types of stairs, ladders and scaffolds as well as bending, lifting/moving objects, and driving to construction sites., • The ideal candidate must be flexible and available to work evenings, extended hours and overtime if/when needed. Must also be able to work rotating shifts which include weekends and holidays. QUALIFICATIONS Candidates must present the following qualifications to be considered eligible for this position: • A minimum of 5 years of experience in construction safety including conducting investigations and accident prevention at construction sites or related fields., • Possess a valid NYC DOB Site Safety Supervisor Card (SST)., • Possess OSHA 30-hour construction safety certificate., • Possess a valid driver’s license., • Strong communications and interpersonal skills., • Strong organizational, time management skills., • Demonstrated experience on Major Capital Construction projects including heavy civil infrastructure construction., • Demonstrated knowledge of Construction Safety and regulations including OSHA 1926 Standards, NYC DOB Code, FDNY, Local laws including DOT, DEP and any other applicable regulatory agency., • Familiarity with National Fire Codes, NFPA standards, NYC and NJ Fire Codes, Rules of the City of NY and FDNY operations and procedures., • Demonstrated ability to evaluate effectively contractor construction safety and fire safety programs and to make technical recommendations based upon findings., • Demonstrated knowledge of hazard recognition and assessment, incident and accident Investigation and reporting and conduct root cause analysis and Job Hazard Analysis., • Demonstrated ability to communicate effectively and professionally with OSHA and FDNY inspectors, construction inspectors, contractors, management, safety professionals, workers and stakeholders., • Demonstrated knowledge using computer safety software utilized for managing and tracking of project hazards, incidents, and program documentation., • Demonstrated computer skills with proficiency in Microsoft Office Suite. DESIRED • CHST certification or other recognized construction safety credential., • Bachelor’s degree in Safety Management or Construction Management, or College Degree in a safety-related field from an accredited institution., • Experience with OCIP and CCIP projects., • Worked on other Port Authority projects. Benefits ITE offers an excellent benefits package including FREE medical, dental, vision, flexible spending accounts, 401(k) with company match, short and long-term disability, life insurance, college savings plan, commuter benefits, and educational assistance.

Job Description Safety Manager Location: Hudson County, NJ; Westchester, NY; Stamford, CT; Suffolk County, Long Island Salary: $120,000 – $150,000 + Medical Benefits REQUIRED: All candidates must have the NYC DOB Site Safety Manager Certificate, including the certificate number and expiration date. Company Overview Our client is a well-established general contractor specializing in ground-up mixed-use multifamily residential construction throughout New Jersey and the five boroughs of New York City. With their main office located in Harrison, NJ, they are seeking a hands-on Safety Manager to support and enforce safety standards across active job sites. Position Overview The Safety Manager will be responsible for the day-to-day implementation and enforcement of the company’s safety program across multiple construction sites. This role is highly field-oriented and will work closely with Superintendents, Project Managers, and subcontractors to ensure compliance and promote a strong culture of safety. This position reports to senior leadership and requires regular communication with both field and office teams. Key Responsibilities • Conduct regular job site safety inspections and enforce compliance with company and OSHA standards, • Identify hazards and implement corrective actions in real time, • Partner with Superintendents and Project Managers to ensure site-specific safety plans are followed, • Review subcontractor safety practices and address any deficiencies on-site, • Assist in incident investigations, including documentation and root cause analysis, • Maintain accurate OSHA logs and safety documentation, • Lead toolbox talks, site orientations, and ongoing safety training, • Monitor PPE compliance and safe work practices across all trades, • Support pre-construction safety planning as needed, • Communicate safety expectations clearly to field personnel and subcontractors, • Coordinate with third-party safety consultants when applicable Position Requirements & Qualifications • 5–10 years of construction safety experience, • Experience working on ground-up commercial or multifamily projects preferred, • OSHA 30 required; OSHA 510 a plus, • CHST, ASP, or CSP certifications are a plus (not required), • Strong knowledge of OSHA regulations and construction safety standards, • Ability to work directly in the field and interact with trades, • Strong communication and problem-solving skills, • Organized and able to manage multiple active job sites, • Proficiency in safety reporting tools and basic technology platforms, • Valid driver’s license and reliable transportation Physical & Work Environment Requirements This position requires the ability to: • Work in all weather conditions, including heat, cold, and rain, • Frequently visit active construction sites, • Climb stairs and ladders and navigate uneven terrain, • Lift and carry up to 50 pounds as needed, • Stand and walk for extended periods Equal Employment Opportunity Statement Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin.

Job Description INFOTRAN Engineers & Architects, P.C. Location: East Orange, NJ or NYC Job Type: Full-Time Design the Future of Transportation INFOTRAN Engineers & Architects is a rapidly growing multidisciplinary engineering and architecture firm specializing in transportation infrastructure, rail and mass transit, institutional, and public-sector projects. We are seeking an experienced Senior Project Architect to join our Architecture Department and help lead the design and delivery of complex, high-profile projects throughout the Northeast. This is an excellent opportunity for an architect who wants to take on meaningful leadership responsibilities, work directly with clients, and help grow a transportation-focused architecture practice. Our current portfolio includes projects for major public agencies such as Amtrak, MTA Construction & Development, MTA New York City Transit, NJ TRANSIT, the Port Authority of New York & New Jersey, Rutgers University, the New York City School Construction Authority (SCA) and NJ Division of Property Management and Construction (DPMC) What You'll Do • Lead architectural projects from planning through construction administration., • Serve as Project Architect and coordinate multidisciplinary design teams., • Develop and oversee construction documents., • Coordinate with structural, civil, MEP, fire protection, and specialty engineering disciplines., • Participate in client meetings and presentations., • Perform technical QA/QC reviews and mentor junior architects., • Review RFIs, submittals, shop drawings, and construction issues., • Support proposal development and business development efforts., • Ensure compliance with applicable building codes, accessibility standards, and client requirements. Qualifications • Bachelor's or Master's Degree in Architecture., • Registered Architect (RA) required., • Minimum 10 years of architectural experience., • Strong Revit proficiency a plus., • Experience leading multidisciplinary project teams., • Excellent communication, organizational, and leadership skills. Preferred Experience We are especially interested in candidates with experience in: • Rail & Mass Transit, • Passenger Rail Stations, • Railroad Maintenance Facilities, • Transportation Infrastructure, • Transit-Oriented Development, • Aviation Facilities, • Institutional and Public-Sector Projects, • Design-Build Project Delivery Experience working with agencies such as Amtrak, MTA, NJ TRANSIT, Port Authority, or similar transportation clients is highly desirable. Don't have rail experience? We encourage experienced architects from aviation, industrial, healthcare, higher education, institutional, government, and mission-critical sectors to apply. Software Experience Preferred experience with: • Autodesk Revit, • AutoCAD, • Bluebeam, • Autodesk Construction Cloud (ACC), • Microsoft Office Experience with MicroStation is a plus but not required. Why Join INFOTRAN? At INFOTRAN, you'll work on projects that improve the way people travel and connect throughout the Northeast. Our architects are involved in every phase of project delivery and have the opportunity to make meaningful technical and design decisions. We offer: • Competitive salary based on experience, • Performance-based bonus opportunities, • Comprehensive benefits package, • 401(k) with company contribution, • Paid vacation and holidays, • Medical, dental, and vision insurance, • Professional licensure reimbursement, • Continuing education and professional development, • Clear opportunities for advancement, • Collaborative and supportive team environment About INFOTRAN INFOTRAN Engineers & Architects is a multidisciplinary engineering, architecture, and planning firm delivering innovative solutions for transportation, infrastructure, institutional, and public-sector clients. Our integrated team of architects and engineers is committed to technical excellence, collaboration, and improving the communities we serve. If you're looking for a place where your ideas matter, your contributions are recognized, and your career can grow alongside an expanding transportation architecture practice, we'd love to hear from you. Apply today and help design the future of transportation.

Job Description The Role Immediate Opening for a Forensic Engineer/ Structural Professional Engineer to work in our Jersey City, NJ location in charge of forensic investigations and expert witness testimony. The Forensic Engineer is responsible for leading and managing forensic investigation, report preparation and expert testimony (in deposition and trial) specifically for community association transitions, construction, claims and ensuring the successful delivery of projects within scope, budget and timeline. Estimated salary range for this position is $120,000 to $170,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable DUTIES & RESPONSIBILITES: Special Requirements Technical • Able to serve as an expert witness and depositions, mediations, or litigation, • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies/defects., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Reviews and interprets drawings, codes, specifications, project manuals, material specifications, etc., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Interprets and specifies a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities, • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations, and drawings., • Oversee and assist in the development and review of technical specifications, drawings, and construction documents. Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches., • Coordinates the recordation of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to direct and provide the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: Education • Bachelor’s degree from a four-year college or university in Structural/ Civil Engineering. Work Experience • Four plus years of experience in the architectural and engineering consulting industry., • Must have experience as an expert witness. Licenses & Certifications • Professional Engineer license required., • OSHA 10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR 2ARqcfr7S2

Job DescriptionCivil/Structural Project Engineer – Solar & Battery Storage Company Overview:Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. Position Description:Soltage is seeking an experienced Civil/Structural Project Engineer to own civil, structural, and site civil engineering for our standalone battery energy storage (BESS) and solar-plus-storage projects, from design review through construction and commissioning. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. Job Responsibilities: • Support civil and structural design for utility-scale BESS, solar PV, substation, and balance-of-plant (BOP) infrastructure across North America., • Lead technical review of civil and structural deliverables, including grading, drainage, stormwater, foundations, equipment support structures, retaining systems, access roads, underground utilities, cable trenches, and erosion and sediment control., • Conduct site visits for field investigations, constructability reviews, geotechnical observations, and foundation and civil infrastructure inspections., • Develop and review engineering calculations, specifications, construction drawings, and submittals for compliance with project requirements and design standards., • Serve as the primary technical point of contact for civil and structural matters from detailed engineering through closeout and oversee external engineering consultants., • Review vendor foundation and wall designs, equipment loads, seismic criteria, and installation requirements for BESS containers, inverters, transformers, switchgear, and substation equipment., • Support RFPs, EPC bid evaluations, engineering estimates, and value engineering., • Resolve RFIs, NCRs, field design changes, and construction issues with contractors to minimize schedule and cost impacts., • Verify completion of civil and structural work during commissioning and support mechanical completion and turnover. Experience and Education Requirements:Required Qualifications: • Bachelor’s degree in engineering required (Civil Engineering preferred)., • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members., • Highly organized and self-directed; able to manage multiple projects under tight deadlines., • Minimum of 3 to 5 years of project or field engineering experience on urban civil construction projects supporting electrical generation or utility equipment., • Strong knowledge of civil and structural engineering for utility-scale BESS, solar PV, substations, and high-voltage infrastructure, including applicable North American codes and standards., • Working knowledge of structural steel, reinforced concrete, shallow and deep foundations, equipment anchorage, seismic and wind loading, retaining and fire/noise-rated walls, duct banks, and cable trenches., • Working knowledge of site development (grading, drainage, stormwater, erosion control, access roads) and geotechnical principles (bearing capacity, settlement, slope stability, liquefaction)., • Experience coordinating with EPC contractors, equipment manufacturers, utilities, Owner’s Engineers, and regulatory agencies., • Familiarity with construction QA/QC documentation, including RFIs, submittals, ITPs, NCRs, punch lists, and as-builts., • Familiarity with construction sequencing, heavy equipment installation, crane planning, and contractor means and methods., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook). Preferred qualifications: • New York State Engineer in Training (EIT) certification., • Experience with construction management and scheduling software such as Procore or Primavera P6., • Familiarity with AutoCAD / Civil 3D. Location:This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, New Jersey. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “Civil Engineer” as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. ️‍PROTECT YOURSELF FROM FRAUDPlease be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Job Description T&M Associates is seeking a multi-talented Principial Engineer to join our Water Market! This opportunity is available in any of our New Jersey or Pennsylvania offices with the flexibility of a hybrid work environment. We are looking for an experienced professional with 8+ years in planning, design, and construction administration of water process, treatment, and distribution projects. This individual will play a key role in managing and designing utility infrastructure projects, with a primary focus on providing project management and design support for linear water, sanitary sewer, and storm sewer improvements for the City of Philadelphia’s utility infrastructure replacement and upgrade program. Key Responsibilities • Lead and manage projects related to drinking water, wastewater, and stormwater systems., • Provide design support for linear water, sanitary sewer, and storm sewer infrastructure upgrades., • Oversee construction administration and ensure compliance with project requirements., • Prepare technical reports, studies, and project documentation., • Track and manage financial performance of assigned projects., • Coordinate workload and provide mentorship to junior staff., • Participate in client meetings, ensuring strong communication and collaboration. Qualifications • Bachelor’s Degree in Civil Engineering required., • 8+ years of related experience in water process, treatment, and/or utility infrastructure projects., • Professional Engineer (PE) license strongly preferred, • At least 2 years of project management experience strongly preferred., • Proficiency in AutoCAD and Civil 3D required., • Experience with MS Office and MS Project (MS Access a plus)., • Strong communication and client-interaction skills. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $105,000 - $135,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job DescriptionProtection and Control Engineer – Solar & Battery Storage Commissioning Company Overview:Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. Position Description:Soltage is seeking an experienced Protection and Control (P&C) Engineer to lead P&C, SCADA, and commissioning engineering for our standalone energy storage (BESS), solar-plus-storage, and solar PV projects, from relay settings and design review through utility witness testing and energization. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. Job Responsibilities: • Provide P&C, SCADA, RTAC, communications, and commissioning engineering for utility-scale BESS, solar PV, and medium- and high-voltage substations across North America., • Lead development and review of P&C packages, including protection philosophies, relay settings coordination, AC/DC schematics, wiring diagrams, panel layouts, and communications architecture., • Develop and review commissioning procedures, relay logic, cause-and-effect matrices, functional specifications, and test documentation., • Oversee SCADA and Energy Management System (EMS) integration, including RTUs, RTACs, HMIs, historians, remote communications, and cybersecurity., • Support implementation of communication protocols including DNP3, Modbus TCP/IP and RTU, IEC 61850, IEC 60870-5-104, OPC UA, and IEEE C37.118., • Lead commissioning activities, including point-to-point verification, relay testing, SCADA checkout, utility witness testing, grid synchronization, and commercial operation support., • Perform root cause analysis on protection events, equipment failures, and communication issues, and recommend corrective actions., • Review vendor submittals, protection studies, commissioning reports, and as-built documentation., • Support EPC scopes of work, technical specifications, and RFPs for P&C, SCADA, and commissioning services. Experience and Education Requirements:Required Qualifications: • Bachelor’s degree in engineering required (Electrical Engineering preferred)., • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members., • Highly organized and self-directed; able to manage multiple projects under tight deadlines., • Minimum of 3 to 5 years of project or field engineering experience on renewable construction projects, with a focus on P&C design and implementation and plant commissioning., • Strong knowledge of P&C systems for utility-scale substations, BESS, solar PV, and medium-voltage interconnection facilities., • Working knowledge of SCADA architectures, substation automation, RTACs, RTUs, protective relays, and industrial networking., • Working knowledge of electrical protection principles including overcurrent, differential, distance, transformer, feeder, bus, breaker failure, synch-check, anti-islanding, and transfer trip protection schemes., • Familiarity with utility interconnection requirements and applicable North American codes and standards., • Working knowledge of commissioning processes including FAT, SAT, relay and protection testing, SCADA verification, and energization., • Familiarity with commissioning documentation, including RFIs, submittals, ITPs, punch lists, deficiency tracking, and as-builts., • Experience writing proposals and presenting to consultants, authorities having jurisdiction (AHJs), and regulatory agencies., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook). Preferred Qualifications: • Experience configuring and troubleshooting SEL protective relays, SEL RTAC platforms, Ethernet switches, and related automation equipment., • New York State Engineer in Training (EIT) certification., • Experience with construction management and scheduling software such as Procore or Primavera P6. Location:This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, NJ. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “P&C Engineer” as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. ️‍PROTECT YOURSELF FROM FRAUDPlease be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Job Description Genesis Technical Staffing is seeking project engineers for onsite roles in multiple states: Bayway, NJ—Ponca City, OK—Borger, TX—Sweeny, TX—Rodeo, CA—Ferndale, WA—Billings, MT The On-Site Project Engineer will serve as a permanent, on-site representative and the primary day-to-day interface between local site personnel and office execution teams. This individual will facilitate the integration of project execution activities between the sites and support the development of new project scopes, and provide on-site coordination to improve alignment, responsiveness, and overall project delivery. Key Responsibilities • Act as the primary on-site liaison between local client staff and the client’s engineering, project management, and support personnel., • Facilitate efficient communication, coordination, and issue resolution between refinery stakeholders and other offices., • Support integration of project execution activities across engineering, procurement, construction, and site operations., • Support Management of Change (MOC) coordination activities by helping track, communicate, and facilitate required inputs, reviews, and approvals between site personnel and the client’s other teams., • Assist in identifying, developing, and defining new project scope opportunities in coordination with client personnel., • Coordinate field information gathering, site walkthroughs, and scope validation to support development of project deliverables, estimates, and execution plans., • Help align project priorities, technical requirements, schedules, and work processes between client personnel and project teams., • Provide on-site input to improve constructability, operability, maintainability, and overall execution readiness for proposed and active work., • Monitor project interfaces, communicate emerging concerns, and help drive timely decisions to minimize delays, rework, and execution risk., • Participate in client meetings, planning sessions, scope reviews, and other project coordination activities as required., • Maintain strong working relationships with the site operations, maintenance, engineering, and project stakeholders while representing the client in a professional manner., • Support safe work practices and ensure coordination efforts are consistent with site requirements., • Provide regular status updates to the client’s leadership regarding project opportunities, execution issues, priorities, and client coordination needs., • Perform as Project Manager for small projects. Qualifications • Bachelor’s degree in Engineering, Construction Management, • Five plus years (preferred) of demonstrated experience as a Project Engineer, Project Manager, or similar project execution role in refining, petrochemical, or industrial facilities., • Strong understanding of brownfield project execution, field coordination, and owner-contractor interface management., • Ability to develop project scopes and support early project planning activities., • Strong communication, organization, and relationship management skills., • Ability to work effectively with site operations, maintenance, engineering, and contractor personnel., • Working knowledge of project controls, schedule coordination, and execution planning is preferred., • Commitment to safety, quality, and responsive client service., • Ability to work independently with remote supervision. Self-starter., • Must be willing and able to work in the field., • All candidates must pass background checks, drug screening, and qualify for issuance of TWIC credentials.\nCompany Description At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things. Genesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/ At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things.\r\n\r\nGenesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\n\r\nBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25 MILES OF WEST ORANGE, NJ AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Mechanical / HVAC Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. We will not consider candidates who are currently employed full-time elsewhere and are seeking side work or moonlighting opportunities. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities • Develop HVAC designs from architectural backgrounds, project criteria, and direction from AEP, • Perform heating and cooling load calculations, • Select and schedule HVAC equipment, • Develop ductwork layouts and sizing, • Develop air distribution systems, • Design ventilation and outside-air systems, • Coordinate mechanical systems with architectural, structural, electrical, plumbing, and fire-protection disciplines, • Prepare mechanical plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required Project Leadership / Client Coordination • Serve as the primary day-to-day technical and coordination lead for assigned projects, • Communicate directly with clients during design development and ask questions as needed, • Obtain, track, and organize required client design information and project correspondence, • Participate in client and coordination meetings, • Manage client and internal deadlines for the Mechanical, Plumbing / Fire Protection, and Electrical / Fire Alarm disciplines, • Manage assigned projects with a high degree of autonomy, with AEP copied, reviewing the work, and participating when needed What We Are Looking For Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing HVAC systems for buildings, • Strong AutoCAD/Revit skills, • Experience producing permit and construction-document drawing sets, • Working knowledge of HVAC load calculations (Trane Trace, Carrier HAP, RHVAC, etc.), • Experience with equipment selection and scheduling, • Knowledge of duct sizing, air distribution, ventilation, and basic controls coordination, • Familiarity with applicable mechanical, energy, building, and ventilation codes, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred., • Working knowledge of the IBC, IMC, ASHRAE 62.1, ASHRAE 90.1, and the NYC Building and Mechanical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • PE licensure is not required for this position. Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing HVAC equipment, ductwork, controls, utilities, and related building conditions, • Taking field measurements, photographs, and equipment information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD and/or Revit software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What hours are you generally available during the workday? . Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation? \nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description Any Moving and interview costs are not reimbursable. May require in-person interview in Jersey City. ON-SITE / Hybrid as per supervisor's discretion. Salary: Pls send your salary requirements per year with resume in word format Macon Pace Inc., Management Consultants and located , NJ has immediate openings for qualified Engineering Project Control Specialist in Jersey City area with Port Authority. See below for details Minimum Requirements (Project Controls – Scheduling) • Bachelor's degree in Architectural, Engineering or related degree, • +7 years of professional experience in Construction Management and Scheduling, • Experience using Primavera P6, Microsoft project is a plus, • Strong communication skills, oral and written, • Experience in Baseline and Update Reviews, • Explain two projects that demonstrate your Baseline and update review experience Job Responsibilities may include but are not limited to: • Provide technical guidance to the Project Controls specialist/support staff, • Coordinate efforts for effective implementation of enterprise scheduling software, Oracle Primavera P6, • Provide project control support for major projects, develop and maintain project schedules, • Prepare monthly, quarter performance and ad-hoc cost /schedule reports, • Prepare performance measurement reports on schedule variance, cost variance based on critical path analysis and schedule risk analysis, • Maintain engineering resource codes in P6, • Manage monthly project status and resource codes updates, • Document project controls execution plan, project controls procedures, and coordination of progress reports, • Develop Engineering Project Controls and scheduling guidelines, • Provide training and administer Primavera Scheduling software Generation of data queries – writing scripts, stored procedures, views, backup data, pivots, etc., Job Description : Project Controls Specialist • Updating schedules in Oracle’s Primavera project scheduling software on a monthly basis or as needed in concert with the project managers;, • Reviewing project status with project managers including scope, schedule and costs;, • Creating and maintaining resource loaded project schedules in Oracle’s Primavera project scheduling software;, • Maintaining proper project and activity codes in the Primavera system;, • Assist assigned project managers and others as required in the preparation of project budgets; updating project forecasts; establishing, maintaining and closing account codes; and preparing monthly and ad-hoc project/program status and performance reports;, • Support the business Department in Capital Planning prioritization., • Perform project/program/portfolio cost and schedule analysis, • Providing training and technical assistance to the project managers in understanding current and future Port Authority project control systems and enhancements. Reporting Location as Required: Services are anticipated to be at the NY city and Jersey City, NJ, but are subject to change Submit : Resume and Salary General Tasks • Project management, scheduling, cost control, project proposal preparation or other management/control services;, • Analyzing, providing design and programming services;, • Implementing procedures and systems utilized in project budgeting, schedules and resources;, • Preparing project control reports and presentations, and training support. Anticipated Project Tasks • Utilizing Oracle’s Primavera software for monthly schedule updating, creating and maintaining resource loaded project schedules, maintaining project and activity codes., • Preparing executive level summary reports, project proposals, budgets, establishing, maintaining and closing account codes., • Providing training and technical assistance in Authority project control systems and enhancements., • Coordinating and mentoring lower level project control specialists., • Assist Program Director and Program Managers in preparation of executive level summary reports;, • Perform cost and schedule variance analysis for the Program Director and Program Managers General Knowledge and Skills Required • Project control concepts, processes and procedures, cost control, project and performance reporting, scheduling, risk management protocols, capital planning and assessment., • Ability to achieve complex goals within tight time frames and simultaneously manage several assignments., • Extensive experience in managing and influencing diverse work groups and project teams., • Proven ability to work independently and effectively on the topics of decision-making, problem solving and negotiations., • Excellent written and verbal communication, interpersonal skills, and professional communication at group level. Qualifications Required • Bachelor of Science in Engineering, Accounting, Economic or Business Administration or Project Management Professional certification with degree in technical field, • Minimum 5+ years of experience in related project industry, • Proficiency in Microsoft Office and Oracle/Primavera software, • Valid driver’s license\nCompany Description Macon Pace, Inc. (MPi) was founded in 2000 and the main office is located in Millstone Twp, New Jersey. MPi is a Management Consulting Engineering Company that specializes in Construction Management and Inspection, Project Control Services, as well as Civil, Structural, Roadway, Electrical and Security Systems, ITS Engineering Design and Computer Aided Drafting (CAD) services within the transportation industry. We keep all interests confidential and offer full benefits package including medical,short and long term disability, Unemployment Insurance, PTO, 401k with Company Match for full time permanent employees only Macon Pace, Inc. (MPi) was founded in 2000 and the main office is located in Millstone Twp, New Jersey. MPi is a Management Consulting Engineering Company that specializes in Construction Management and Inspection, Project Control Services, as well as Civil, Structural, Roadway, Electrical and Security Systems, ITS Engineering Design and Computer Aided Drafting (CAD) services within the transportation industry.\n\nWe keep all interests confidential and offer full benefits package including medical,short and long term disability, Unemployment Insurance, PTO, 401k with Company Match for full time permanent employees only

Job Description Daily responsibilities vary greatly for remodelers depending on the property where they’re working and the types of building and repair tasks which need to be performed. The core duties that remodelers perform, however, are universally the same whether they work for themselves or within a company dynamic. Assess Work Sites Remodelers assess work sites where remodeling work is desired, and determine what needs to be done to complete the requested remodel work. Perform Carpentry Work Remodelers perform various carpentry tasks that include installing cabinets, hanging doors, and framing rooms. Replace Plumbing Fixtures Remodelers replace plumbing fixtures such as sinks, toilets, and faucets. Hang Drywall Remodelers hang, repair, and replace drywall as needed for new and existing rooms. Install Flooring Remodelers install floors, including wood floors, carpeting, concrete, and other flooring types. Lay Tile Remodelers install new tilework on floors and walls, place new grout, and repair existing tile. Follow All Building Codes Remodelers take out all required permits and follow building codes as set forth by city, county, and state laws. Make Repairs Remodelers repair existing property elements when possible. Perform Finish Work Remodelers install and replace trim, molding, windows, and perform other finish work. Replace Light Fixtures Remodelers replace light fixtures and ceiling fans. Clean Job Sites Remodelers clean up job sites during and after remodeling work. Remodeler Skills and Qualifications Remodelers use physical ability and mechanical skills to replace and repair walls, floors, roofs, cabinets, counters, and fixtures of all types in order to build new rooms and refurbish existing rooms. Employers and individuals look for remodelers who have the skills needed to perform these tasks. • Mechanical skills – remodelers use a variety of tools and perform many different tasks that include carpentry, plumbing, and light electrical work., • Communication – remodelers work collaboratively with construction workers and other professionals, which requires excellent verbal communication skills., • Physical ability – remodelers use physical ability to work with their hands and perform many tasks that require squatting, standing, and bending for hours at a time., • Attention to detail – because different aspects of remodeling work depend upon each other to function properly and look good, remodelers pay close attention to ensure that all work is performed well and correctly., • Multi-tasking – as remodelers perform work on different projects and rooms while using a vast variety of remodeling skills, multi-tasking is an essential component of the job. Tools of the Trade Remodelers work regularly with the following tools: • Hand tools (hammers, screwdrivers, saws, demolition bars), • Power tools (drills, nail guns, saws)\nCompany Description We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects. As a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew. We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects.\r\n\r\nAs a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.

We are seeking a dynamic, results-driven Inside Sales Representative (ISR) to join our growing Industrial Sales team. The ideal candidate brings a proven track record in equipment finance coupled with hands-on experience in the construction, machine tool, material handling, or packaging sectors. Operating as a pivotal account manager and program manager, you will play a critical role in cultivating, servicing, and expanding relationships with new vendors, dealers, and commercial customers stemming from our active business development pipeline. \n \n The ISR reports directly to the Head of Sales – Industrial and is based in our Jersey City, NJ office. \n \n Essential duties and responsibilities \n\n • Drive Profitable Performance: Originate transactions with assigned vendors and actively prospect to secure new customer and dealer relationships.\n, • Manage Key Accounts: Serve as the primary point of contact and dedicated program manager for designated vendor accounts, ensuring exceptional service delivery.\n, • Deliver Partner Value: Design tailored financial solutions that create measurable value for our vendor partners and customers while consistently achieving corporate financial targets.\n, • Analyze & Forecast: Provide accurate monthly sales forecasts and maintain meticulous pipeline records within Salesforce.\n, • Structure & Close Deals: Price, structure, and close transactions, including the pre-screening of customer financial applications prior to credit submission.\n, • Collaborate with Field Sales: Provide strategic support to the Field Sales team on credit submissions, documentation requests, and funding processes.\n, • Streamline Processes: Partner with cross-functional teams to optimize program execution and participate in strategic initiatives aimed at continuous process improvement.\n\n \n Qualifications \n\n • Industry Experience: Minimum of 5 years of successful sales experience within the leasing and equipment finance sector.\n, • Academic Background: Bachelor’s degree in finance, business, or a closely related field.\n, • Financial Expertise: In-depth, functional knowledge of commercial leasing/lending products, structures, processes, and industry-standard tools.\n, • Industry Credibility: A demonstrated history of successfully growing and nurturing vendor relationships within the construction, machine tool, material handling, or packaging industries.\n, • Credit & Structuring Acumen: Robust command of credit analysis, lease/loan documentation, and a clear understanding of risk-versus-return dynamics.\n, • Solution-Oriented Structuring: Proven ability to structure both standard and highly complex financial transactions.\n, • Technical Proficiency: Functional expertise in Salesforce (CRM) and TValue.\n, • Relationship & Influence: Exceptional relationship-building, communication, and interpersonal skills, with a natural ability to motivate and influence stakeholders.\n, • Agility & Drive: Strong problem-solving abilities, sharp attention to detail, and the capacity to thrive in a high-productivity, fast-paced commercial environment.\n, • Mobility: Willingness to travel as needed for client meetings, key industry events, and conferences.\n\n \n What We Offer \n BPCE Equipment Solutions offers a collaborative, professional, and supportive working environment where your contributions are directly felt. We offer competitive compensation, comprehensive benefits, and a dynamic office environment in vibrant Jersey City. \n \n The salary range for this position will be between $100,000 - $120,000. We are required by law to include a reasonable estimate of the compensation range for this role. Actual base salary will vary and will be based on several factors including, but not limited to, relevant experience, education, skills set, applicable licensure and certifications, and other business and organizational needs. Base salary is only one component of our total rewards package. BPCE Equipment Solutions also offers a generous benefits package, and you may be eligible for a discretionary incentive award depending on company and individual performance

Entry-Level Recruiter / Sales – NYC & North Jersey \n \n We’re partnering with a growing staffing and recruiting company that is hiring early-career talent for its teams in New York City and North Jersey. \n \n The company works across construction, engineering, design, environmental, life sciences, skilled trades, and other technical industries. \n \n They’re looking for competitive, driven people who want to build a long-term career in recruiting, sales, account management, and leadership. \n \n This is a great fit for former college or professional athletes, recent graduates, and people who have succeeded in competitive, customer-facing, hospitality, coaching, construction, or other high-energy environments. \n \n What You’ll Do \n You’ll start on the recruiting side of the business and learn how to: \n\n • Source and identify qualified candidates\n, • Make high-volume outbound calls and build relationships\n, • Conduct candidate interviews and screenings\n, • Manage follow-up and maintain an active recruiting pipeline\n, • Learn the industries and clients the company supports\n, • Work closely with Account Managers to understand client hiring needs\n, • Develop the sales, communication, and relationship-building skills needed to grow into a client-facing role\n\n The role can involve up to 50 outbound calls per day and is best suited for someone who is comfortable with activity, rejection, follow-up, and consistent effort. \n Career Growth \n \n There is a clear long-term path: \n Recruiter → Account Manager → Division Manager \n As you prove yourself, you can take on more responsibility in account management, client development, business development, and eventually leadership. \n This is an opportunity to learn the staffing business from the ground up and grow into a sales and leadership career. \n What They’re Looking For \n\n • Competitive, disciplined, and coachable\n, • Strong communication skills\n, • Comfortable talking to people throughout the day\n, • Willing to make outbound calls and handle rejection\n, • Consistent and process-driven\n, • Motivated by performance and career growth\n, • Comfortable working in a fast-paced environment\n, • Former college and professional athletes are strongly encouraged to apply\n, • Prior recruiting or sales experience is not required\n\n \n Compensation \n\n • $50,000 base salary\n, • Uncapped commission\n, • Approximately $60,000–$65,000 first-year earning potential\n, • Opportunity to grow toward $80,000+ as you progress\n\n \n Benefits \n\n • Healthcare\n, • Paid time off\n, • Training and mentorship\n, • Long-term growth opportunity\n\n \n Location \n 5 days per week in office \n Openings in: \n\n • New York City\n, • West Caldwell, NJ\n\n \n If you’re early in your career, competitive by nature, and looking for a place where performance can lead to real career growth, we’d like to hear from you.

Job Description Beware of Recruitment Fraud: We are committed to protecting job seekers from recruitment fraud. Please be aware that all official communication regarding opportunities with our firm will come exclusively from an email address ending in @RoseNYC.com. We will never request payment, financial information, or sensitive personal documentation during the application process, and we will never extend a job offer without first conducting a formal in-person interview. If you receive a message that appears suspicious or does not originate from this domain, please mark it as spam or phishing and report it to us directly at recruiting@rosenyc.com. Overview Rose Associates is a recognized market leader in multifamily and mixed-use real estate. Based in New York City, we own, develop and operate leading properties in urban markets from Philadelphia to Boston and across all residential asset classes, including market, regulated, workforce and affordable housing. Our dynamic services platform spans development, construction, property and asset management, leasing, marketing and accounting/financial operations. We partner with private owners and institutional investors globally to develop and operate some of the most iconic assets in our markets. We rely on technology and the deep expertise of our team to consistently outperform the market in the operation of more than 30,000 units across some 250 properties in the most challenging housing markets in the country. For the past three years, Rose has been the top-rated manager for resident satisfaction in the United States on the Kingsley Surveys platform (peer group of firms with 10-30,000 units being surveyed). Established in 1925, Rose Associates possesses a century of real estate expertise and an impeccable reputation for excellence and integrity. Today a woman-owned business led by CEO Amy Rose, we are committed to a corporate culture of belonging and inclusion that is widely admired in the industry. As we expand across the Northeast, Rose is providing opportunity for our team members to grow their careers in an environment of respect and support. Join us on the forefront of innovation and growth – Rose Associates is where excitement meets opportunity! We are seeking a highly motivated and customer-focused Residential Property Handyperson to join our vibrant team and contribute to the overall maintenance, satisfaction and well-being of our residents. The ideal candidate will be proficient in a variety of repair and maintenance tasks, contributing to the overall well-being of the property and ensuring a safe and comfortable environment for residents. Essential Functions • Perform routine maintenance and repairs on residential units, including plumbing, electrical, HVAC, appliance repair, and carpentry tasks., • Address minor HVAC issues, Inspect, troubleshoot, and repair household appliances to ensure functionality and safety and collaborate with specialized technicians for major repairs. Coordinate with vendors for appliance replacements when necessary., • Paint and complete drywall repairs to maintain a fresh and appealing appearance throughout the property., • Repair and replace flooring materials as needed, ensuring a safe and aesthetically pleasing environment., • Perform routine maintenance on units in preparation of apartment turns, and maintain maintenance shop, including related inventory of supplies., • Conduct regular safety inspections, identifying and addressing potential hazards promptly., • Be available for on-call duties and respond to emergency maintenance requests outside regular working hours., • Comply with workplace safety and OSHA regulations., • Must be present on-site and be able to move throughout the building to address building related matters and meet with tenants, staff, vendors and visitors., • Ability to ascend and descend stairs, as well as positioning oneself in small spaces for building inspections and maintenance repairs and lifting and moving large or heavy objects in excess of 50 pounds., • Must be comfortable with exposure to varying environmental climates and circumstances. Qualifications • High School diploma or equivalent and / or previous experience in a handyman capacity is preferred., • Knowledge of safety protocols, building codes and utilization of related machinery and tools is required., • Strong problem-solving skills and attention to detail., • Currently possesses EPA 608 Universal technical certification, S12, S13, S95, P99 or capable of obtaining the required certifications., • Proficient in computer operations, particularly skilled in using Microsoft Office and Yardi software., • Work authorization (required)Hourly pay range: $27 - $30 Powered by JazzHR ErSZgDsE0X

Job Description About Us: Vanderweil Engineers is one of the largest and most respected privately-held MEP engineering firms in the United States. Sustainability is at the core of what we do. Vanderweil is a founding signatory of both the AIA 2030 and the MEP 2040 Challenges. Over 300 of our projects — a combined total of nearly $24 billion in construction — have achieved certification under frameworks such as LEED®, WELL, Fitwel, SITES, and Green Globes. Recent projects include the largest solar photovoltaic array in New York City, multiple net-zero designs, a research facility designed to be the world’s most sustainable lab, and a zero-carbon steam-generating heat pump which will reduce the emissions of millions of square feet in Greater Boston. About This Opportunity: If you’re looking for an opportunity to grow your career with some of the best minds in the industry on world-class projects, we’re looking for you. We offer stable career growth via our expanding book of services and geographic footprint across a diversified project mix. Join us to do the best work of your career as a Senior Building Performance Engineer (Hybrid Role) in our growing Building Performance Group in Boston, MA, or in one of Vanderweil’s offices in New York, NY; Newark, NJ; Philadelphia, PA; Alexandria, VA; Atlanta, GA; or Miami, FL. As a Senior Building Performance Engineer, you will proactively collaborate with our project managers and engineers internally, as well as externally with our owner, design, and construction partners, to provide the analyses and insights that help clients solve complex challenges. Some of your responsibilities will include the following: • Propose holistic energy, water, and carbon reduction opportunities early in the design process, and back those ideas up with rigorous analysis and thoughtful data visualizations to clearly communicate complex concepts., • Evaluate architectural and MEP system design to optimize performance and track progress toward project goals., • Lead junior engineers[CS1] to create complex energy savings calculations and technical client-facing reports. Educate, delegate, and provide quality control for their analysis efforts., • Research and synthesize applicable energy codes & policies. Compare compliance paths to advise owners and design teams and minimize risks to projects., • Perform life-cycle cost analyses, solar photovoltaic feasibility analyses, and water reduction studies. Essential Skills & Requirements: • 7-15 years of building performance analysis or design engineering in a consulting environment., • Bachelor’s or master’s degree in mechanical engineering, energy systems, or architectural engineering., • Experience interfacing with internal and external clients. Additional skills considered a plus: • Experience with eQuest, IES, EnergyPlus, or similar, and the ability to generate spreadsheet energy calculations., • Holds a PE registration., • LEED AP BD+C, BEMP, CPHC, and/or CEM Credential, • Experience mentoring, training, or overseeing work of less experienced engineers, • Field experience including performing field surveys for energy audits, observation of construction progress, commissioning, and/or operating a facility., • HVAC design experience Our Flexible & Hybrid Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com. The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $70,000 to $140,000 range. Vanderweil Engineers is an equal opportunity employer committed to diversity with a work environment free of discrimination and harassment.

About Our Client Our client is a dynamic, rapidly growing leader in the New York City construction market, specializing in complex, large-scale developments. Their core expertise lies in the ground-up construction of high-rise residential towers and major commercial buildings for premier capital clients. Joining their team means stepping into a high-stakes, highly rewarding environment where your field leadership directly shapes the NYC skyline. Operating with a strong emphasis on teamwork, collaboration, and talent investment, our client provides the resources and support needed to achieve excellence on every build. Role Overview: Command the Field Our client is seeking two experienced and highly motivated Construction Superintendents to serve as definitive leaders on their field operations team. This is a critical, high-visibility role demanding exceptional on-site leadership and deep technical expertise in ground-up construction methodologies. If you bring a passion for managing the complete lifecycle of a build—from foundation to final punch list—and a track record of career stability on major NYC projects, our client wants to connect with you. Key Responsibilities: Drive Execution & Excellence As a Superintendent, you will serve as the primary on-site authority, driving quality, safety, and timely delivery across major developments. • Field Command: Oversee and lead all day-to-day field operations on assigned ground-up construction projects, driving progress schedules and optimizing resource allocation., • Quality & Delivery: Guarantee projects are delivered on schedule, within budget, and to the high-caliber standards required by top capital clients., • Trade Leadership: Expertly coordinate, direct, and supervise all subcontractors, vendors, and site labor to maintain maximum productivity and accountability., • NYC Safety & Compliance: Enforce strict compliance with all NYC Department of Buildings (DOB) codes, OSHA standards, and site safety protocols to maintain a zero-incident work environment., • Cross-Functional Collaboration: Partner closely with Project Managers, architects, structural engineers, and client reps to proactively resolve field conditions and maintain site momentum., • Reporting & Tracking: Provide clear, detailed daily log entries and weekly progress reports to executive leadership on milestones, logistics, and risk mitigation. Qualifications: What You Bring • NYC Registration: Must possess an active NYC Department of Buildings Superintendent License/Registration (Mandatory)., • Ground-Up Track Record: 6–8+ years of dedicated construction experience with a proven history of managing full project lifecycles from foundation to completion., • High-Rise / Commercial Scope: Demonstrated field experience leading high-rise residential or large-scale commercial ground-up builds within NYC., • Decisive Leadership: Strong site presence with the ability to manage diverse trades, enforce site safety, and maintain schedule velocity., • Professional Stability: A history of career tenure and steady progression with prior employers. Compensation & Perks Our client offers a top-tier compensation package designed to attract and retain elite field leaders: • Competitive Base Salary: $140,000 – $180,000 (commensurate with experience), • Performance Bonuses: Discretionary performance-based incentive structure, • Health Coverage: Oxford Medical Plan options, • Retirement: 401(k) plan with a 3% Safe Harbor contribution after one year, • Career Growth: Direct line of visibility to executive leadership with room for advancement as the firm continues to scale

Role: Senior Technical Designer Location: New York City (Central) Role Summary: We are seeking an experienced Senior Technical Designer to join our team based in New York City, USA. The ideal candidate will possess a wealth of knowledge in garment production, testing and quality control. Key Responsibilities: • Responsible for leading, scoping, and owning the full fit process, ensuring accountability and excellence across all designated product areas., • Setting standards for all technical aspects of garment production to ensure high quality and functional products., • Responsible for the setting and ensuring KPI's are followed – reduced defect rate, increased first time pass rate, production efficiency, compliance rate and reduced returns rate., • Management of the end-to-end QC process. Inclusive of fabric testing, audits and the management of safety standards., • Delivering continuous creative solutions to support long term compliance with manufactures., • Effectively liaising with manufactures ensuring cohesive process control throughout production., • Manage and conducting in-house fit sessions whilst taking steps to proactively prevent technical issues, • Management of sampling processes ensuring accuracy, speed and compliance., • Liaising with the Designers, Buyers and Suppliers to offer technical guidance on new product development and garment construction., • Management of grading and tolerance rules., • Implement solutions from analysing returns and faults to reduce. Requirements: • A minimum of 7 years’ experience in a similar role (including multi-product experience), • Exceptional understanding of garment construction, quality control and fabric technology/testing, • Experience of working directly with manufactures, • A positive attitude towards challenges and implement solutions, • Strong time-management skills; able to prioritise tasks & be flexible, • Clear concise communication is a must both written and verbally, • Confident using Outlook and Excel

Company Overview Company Overview Ategrity Specialty Insurance Company specializes in property and casualty insurance, with a strong emphasis on the excess and surplus (“E&S”) lines market, partnering with brokers and wholesale agents throughout the U.S. to provide insurance solutions for small and medium-sized enterprises (SMEs). Our aim is to establish ourselves as the premier E&S carrier by combining robust technical underwriting, intelligent operational efficiencies, sound risk management, and deep specialization. Central to this strategy is productized underwriting; translating deep underwriting expertise into repeatable, scalable, and data-driven underwriting frameworks that enable consistent decision-making and disciplined execution. Ategrity is a proactive, data-obsessed organization with a culture focused on execution and continuous improvement. By combining technical underwriting with clearly defined appetite, pricing, segmentation, workflows, and technology, we are able to scale underwriting expertise while maintaining discipline and speed. Our team is comprised of individuals who act with determination, accountability, and conviction to establish our “right to win” in the SME market. Position: AVP, Underwriting – Energy Location: Richmond, VA; Scottsdale, AZ; Atlanta, GA; New York City, NY Role Overview: The Assistant Vice President (AVP), Underwriting – Energy is a market-facing underwriting role responsible for underwriting and managing new and renewal Energy business, developing strong broker relationships, and contributing to the profitable growth and performance of the portfolio, with an initial emphasis on upstream and midstream risks. The AVP will combine deep technical Energy underwriting expertise with strong commercial judgment and production capabilities to identify, evaluate, price, negotiate, and close complex Energy risks. The role will manage an assigned book, territory, or broker portfolio within established underwriting authority and appetite while maintaining accountability for premium, profitability, retention, rate, new business, and portfolio quality. This position will also contribute to portfolio management, capacity deployment, and the continued development of Ategrity’s Energy capabilities. The AVP will serve as a technical resource, provide coaching and guidance to underwriters, and partner across the organization to strengthen underwriting execution, portfolio analytics, market presence, and long-term profitability. Key Responsibilities • Underwrite and manage Energy business. Underwrite complex new and renewal accounts within established authority, guidelines, and risk appetite, determining appropriate risk selection, pricing, limits, attachment points, terms, conditions, and coverage structure., • Own book performance. Manage an assigned book, territory, or broker portfolio to established premium, profitability, retention, rate, and new business objectives while monitoring portfolio mix, concentrations, aggregation, severity exposures, and emerging risks., • Drive profitable growth. Develop and maintain a strong pipeline of qualified opportunities and execute transactions with retail and wholesale brokers while maintaining disciplined risk selection, pricing adequacy, and thoughtful capacity deployment., • Provide technical underwriting expertise. Personally underwrite complex and high-value Energy accounts and serve as a technical resource on Energy operations, property and casualty exposures, policy forms, coverage structures, pricing, limits, and attachment strategies., • Lead broker and market development. Develop and strengthen relationships with key retail and wholesale brokers, proactively communicate Ategrity’s Energy appetite and capabilities, and identify opportunities to expand relationships, submission flow, and conversion., • Maintain a strong market presence. Represent Ategrity with brokers, insureds, risk managers, reinsurers, and other industry participants through broker meetings, client engagements, conferences, and market events., • Support portfolio and capacity management. Analyze portfolio and account performance to identify trends, concentrations, opportunities, and areas requiring corrective action, and support capacity, limits, aggregation, and portfolio protection decisions., • Maintain Energy industry expertise. Stay current on Energy operations, market conditions, competitive dynamics, loss activity, capacity, emerging exposures, and evolving industry practices, with deep knowledge of upstream and midstream risks., • Lead and develop underwriting talent. Provide coaching, mentoring, and technical development to underwriters and help build a culture of accountability, collaboration, responsiveness, and underwriting discipline., • Collaborate across the organization. Partner with Claims, Actuarial, Reinsurance, Risk Engineering, Operations, Product, technology and data resources, and underwriting leadership to support sound underwriting decisions and portfolio performance., • Ensure underwriting and operational excellence. Maintain compliance with underwriting authorities, guidelines, governance standards, documentation requirements, established workflows, and corporate objectives. Required • Bachelor's degree or equivalent combination of education and relevant professional experience., • 7+ years of commercial insurance underwriting experience, including meaningful direct underwriting experience within the U.S. Energy market., • Deep expertise in upstream and midstream Energy risks, with broader Energy experience considered highly valuable., • Strong technical knowledge of Energy operations and associated property and casualty exposures., • Demonstrated experience underwriting relevant casualty products, which may include Commercial General Liability, Umbrella/Excess Liability, Commercial Auto, Workers’ Compensation, Control of Well, and Energy Package business., • Experience underwriting both primary and excess business and managing complex layered insurance programs., • Demonstrated track record of underwriting profitable new and renewal business, disciplined risk selection, effective renewal management, and sound capacity deployment., • Strong command of policy forms, coverage structures, pricing, attachment strategies, limits management, aggregation, and portfolio management., • Established relationships with retail and wholesale brokers active in the U.S. Energy marketplace., • Ability to analyze complex risks and make sound underwriting decisions within delegated authority., • Strong analytical, communication, negotiation, collaboration, and relationship-management skills., • Ability and willingness to travel as business needs require. Preferred Qualifications • Experience managing an assigned territory, broker portfolio, or substantial book of Energy business., • Credibility with reinsurance and capacity providers and an understanding of how portfolio construction affects capacity and reinsurance requirements., • Experience coaching or developing less-experienced underwriters., • Broader Energy experience beyond upstream and midstream risks., • CPCU, ARM, or other relevant professional designation. Benefits: • Competitive salary commensurate with experience, • Comprehensive benefits package including medical, dental, and vision coverage, • 401(k) retirement savings plan with employer match, • Paid time off and company holidays, • Professional development opportunities, • Collaborative and inclusive work environment with opportunities for career growth and advancement Ategrity Specialty Insurance Company is an equal opportunity employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply.