Offres Construction & Trades à Norwalk, California - Page 7Créer des alertes d'emploi

Job Description Schedule: Monday - Thursday Hours: 3 pm- 1:30 am (4/10 schedule) Job Term: Temp to hire Job Duties: • Inspects systems work area for unsafe conditions., • Operates system in a safe and efficient manner., • Performs preventative maintenance a n d servicing of equipment as required., • Ensures hazardous energy to equipment is locked out before repair or cleaning activities begin., • Conducts System service, PM's and assists Maintenancewith minor repairs of equipment as directed., • Sets up pack out equipment configuration as outlined on the production schedule., • Operates and monitors finished product pack out systems and ensure that bag weights are within specification. Pack out systems may consist of manual, automatic or a combination of the two. Manual stacking is required on occasion., • Responsible for maintaining packaging supply inventory within the production facility., • Produces and loads matetials as established by the Leads/Production schedule., • Legibily completes paperwork including batch records, plant orders, sample bags, inspection reports, etc., • Keeps work area, warehouse and outside of plant in a neat and orderly condition following GMP guidelines., • Advises succeeding Operator(s), Lead and maintenance of operating problems and conditions., • Employees must learn and observe all applicable company policies and safe practices and perform all duties assigned by supervisor., • This description covers the significant duties of the job. Other duties may be assigned as directed by the lead/plant manager.Job Requirements:, • High School Diploma or GED equivalent required. Technical school a plus., • 3 to 5 years industrial experience or a combination of education and experience preferred., • Willing and able to work and act safely., • Must be able to perform basic mathematical calculations that include the following: multiplication, addition, and percentages - all of which can be accomplished with the use of a calculator if needed., • Good oral and written communication skills and speak and write English. Bilingual a plus., • Must be able to read and comprehend company safety manual policies, operating procedures, SDS and various production schedules/reports in English., • Forklift experience preferred. Job Posted by ApplicantPro

Job DescriptionFull-time Maintenance Tech ElectricianTop Aerospace Global SupplierAbout Us We are a leading global supplier in the aerospace industry, known for our cutting-edge technology and commitment to excellence. Our state-of-the-art facilities require skilled professionals to maintain and optimize our advanced manufacturing processes. We are currently seeking a highly skilled and experienced Full-time Maintenance Electrician to join our team. Job Overview As a Maintenance Electrician at our aerospace manufacturing facility, you will play a crucial role in ensuring the smooth operation of our electrical systems, equipment, and machinery. Your expertise in control panels, PLCs, and troubleshooting will be essential in maintaining the high standards of quality and efficiency that our industry demands. Key Responsibilities • Install, maintain, and repair electrical systems, equipment, and components in our manufacturing facility, • Conduct regular inspections of electrical systems to identify potential issues and perform preventive maintenance, • Troubleshoot and diagnose electrical problems in various systems, including control panels, motors, and PLCs, • Read and interpret electrical schematics, blueprints, and technical manuals, • Program and maintain Programmable Logic Controllers (PLCs) for automated systems, • Design, install, and modify control panels for various manufacturing processes, • Ensure compliance with all relevant electrical codes, safety regulations, and company policies, • Collaborate with other maintenance teams and production staff to minimize downtime and optimize equipment performance, • Maintain accurate records of maintenance activities, repairs, and equipment history, • Participate in ongoing training and professional development to stay current with industry advancements, • Respond to emergency calls and perform repairs during off-hours when necessary, • Assist in the implementation of energy-saving initiatives and process improvementsQualificationsRequired:, • High school diploma or equivalent, • Journeyman Electrician certification or equivalent experience, • Minimum of 5 years of experience as an industrial maintenance electrician, • Proficiency in working with control panels, PLCs, and troubleshooting complex electrical systems, • Strong knowledge of electrical theory, circuits, and components, • Ability to read and interpret electrical schematics and technical documentation, • Experience with industrial automation systems and equipment, • Familiarity with NFPA 70E and other relevant electrical safety standards, • Excellent problem-solving and analytical skills, • Strong communication and teamwork abilities, • Ability to work flexible hours, including nights, weekends, and holidays as neededPreferred:, • Associate's or Bachelor's degree in Electrical Engineering or related field, • Additional certifications such as Master Electrician or Industrial Electrician, • Experience in aerospace or other high-precision manufacturing environments, • Knowledge of energy management systems and practices

Job Description At Verde Clean, we're committed to providing cleaner, healthier, and more sustainable workspaces. We're looking for a Floor Technician who is dedicated to maintaining the highest standards of cleanliness, floor care, and safety in an eco-friendly environment. If you have a passion for floor maintenance and attention to detail, we want you on our team! Position Details • Schedule: Monday–Friday. Work hours/locations will vary based on coverage needs. Candidates must have a flexible schedule, including availability on some weekends., • Pay: $21.44/hour, • Location: Reports to our main office in Cerritos, CA and must be able to drive to client sites throughout Los Angeles County., • Requirements: Valid driver's license and clean MVR required. As a Floor Technician, you'll be responsible for maintaining the cleanliness and appearance of floors across various types of spaces, ensuring they remain safe, clean, and in optimal condition. Your key responsibilities will include: • Floor Cleaning & Maintenance: Perform regular floor care duties, including sweeping, mopping, buffing, and polishing floors to keep them clean and well-maintained., • Floor Equipment Operation: Operate and maintain floor care equipment such as buffers, scrubbers, and polishers. Ensure all equipment is functioning properly and report any issues., • Restoration & Repair: Assist with floor restoration and repairs, including spot cleaning, removing stains, and addressing minor damage to flooring materials., • High-Quality Standards: Ensure floors meet high standards of cleanliness and safety. Follow detailed cleaning protocols for different types of flooring (e.g., tile, carpet, wood, etc.)., • Safety & Compliance: Maintain safe working conditions by using appropriate cleaning chemicals and equipment, adhering to safety standards, and following proper procedures for hazardous materials. What We're Looking For: We're looking for someone who is reliable, detail-oriented, and experienced in floor care. Here's what we're hoping for: Qualifications: • High school diploma or equivalent., • Previous experience in floor cleaning and maintenance is preferred., • Ability to operate floor cleaning equipment and follow safety protocols., • Knowledge of various flooring materials and specific cleaning requirements., • Strong attention to detail, problem-solving skills, and excellent communication. What We Offer: • Culture: Verde is a community-focused, high-energy workplace where employees are valued. Our Culture Committee organizes activities, and you'll hear "Vs Up!" as we celebrate our core values of Safety, Sustainability, Social Impact, and Awesomeness., • Giving Back: We provide paid Volunteer Time Off (VTO) so employees can support causes that matter to them, including minority, environmental, and youth-focused charities., • Growth: At Verde, we prioritize personal and professional development, offering opportunities to grow and advance within the company. Physical Requirements: This role requires walking, standing, bending, and lifting up to 25 pounds. Reasonable accommodations may be made for individuals with disabilities. Equal Opportunity Employer: Verde Clean is a Minority Business Enterprise (MBE) and is committed to diversity and inclusion in the workplace. We are an equal opportunity employer and encourage individuals from all backgrounds to apply. Who We Are: Verde Clean Founded in 2019, Verde Clean is a minority-owned, eco-friendly facilities services company that prioritizes environmental protection and social justice. Our mission is to provide clean spaces where people work, learn, and play, all while supporting sustainability and community well-being. At Verde, we live by our core values: Safety, Sustainability, Social Impact, and Awesomeness. We serve diverse communities nationwide and offer our full-time employees paid volunteer hours to make a difference through community service. Why Verde Clean? At Verde, you'll join a community-focused organization with a high-energy culture. Here's what makes us unique: • Positive Workplace Culture: We prioritize a family-friendly environment with fun team activities and events organized by our Culture Committee. You'll hear "Vs Up!" as we celebrate our core values: Safety, Sustainability, Social Impact, and Awesomeness., • Community Involvement: We support causes related to minority, environmental, and youth-focused initiatives, and offer paid volunteer time off (VTO) so you can make a meaningful impact., • Growth & Development: We believe in the growth of our employees and provide opportunities for advancement within the company. Ready to Join Us? If you're excited to help maintain clean, sustainable spaces and be part of a team that values community and eco-friendly practices, apply today and show us your #VerdeVibes! Job Posted by ApplicantPro

Job Description Who we are: Build your career with Boldt. As a member of the Boldt team, you’ll collaborate with some of the most knowledgeable professionals in the construction industry. You’ll have the chance to learn new skills and seek greater responsibilities with a team that builds real value in the world around you. You’ll succeed in a workplace culture that recognizes, respects, and values differences. Boldt’s focus on innovation, collaboration, and employee development provides an opportunity for all our employees to Build Boldly. How your role fits into Boldt: The Estimating & Preconstruction Manager will work to support the enterprise including operating groups, project management, estimating and support staff. This position will provide preconstruction and estimating leadership based on Lean principles that support a collaborative and integrated project delivery. Responsibilities include preparing, planning, prioritizing, and evaluating estimates, along with being engaged in the Target Value Design process. This position will be responsible for coordinating and oversight of internal and external estimating resources. Currently, the projects that this position will support are within the healthcare industry. Experience working with OSHPD or HCAI are a must. What you get to do: • Lead and/or develop a project from the first estimate to subcontract formalization. Prepare bid documents for clients. Support all estimating and functions for projects including establishing reporting formats, assignment of areas of estimating responsibility, compiling estimates, preparation, and oversight., • Present or participate in project estimates and budgets to project Owners and other partners., • Prepare and send out bid documents and instructions to Bidders to optimally procure and buyout projects and smooth transition. Turn-over to project leaders and ensure subcontractors are prequalified prior to bidding and contracting with Boldt., • Review proposal specifications, drawings, attend pre-bid meetings, etc. to resolve scope of work and required contents of estimate., • Owns the bidding process including bid solicitation, bidders’ communications, proposals evaluations, bid tally sheet preparation and bid analysis., • Owns the review of all final estimate packages to ensure accuracy and completeness prior to formal quotation., • Perform comparisons of scope, quantities, and cost data between projects., • Prepare studies for proposed materials and method solutions, generate recommendations and cost estimates as required., • Complete the design to budget approach in preconstruction. Work with design and project management teams to find alternative solutions to budget challenges, analyze maintenance costs and life cycle costs to achieve a valuable solution to the client., • Assist project team in the continuous assessment of project risks how it relates to the overall project cost. Consolidate all risk and opportunities and integrate into the costs. This includes assisting project leaders in reviewing monthly trade partner cost reports and labor reports and identify variances from the original estimate., • Assist in the development and implementation of estimating and cost modeling with designers, architects and engineers using a model-based process for projects that are designed from a model., • Implement process improvements., • Develop and maintain professional relationships and the highest ethical standards with clients, and other customers. Communicate with customers openly and honestly, while maintaining company’s confidential and proprietary information. Seeks input and feedback from both external and internal customers., • Bachelor's Degree in Construction Management, Engineering, or Architecture degree required. An equivalent combination of education, training and/or experience may be considered in lieu of a degree., • Eight to ten years of construction, structural engineering, architecture, and/or estimating experience or a combination of these experiences required., • Thorough knowledge of estimating processes, material and building system costs, labor productivity evaluation techniques, and conceptual project construction requirements., • Experience in Guarantee Maximum Price (GMP) as well as Lump Sum (Hard) Bid type of projects., • Healthcare construction project experience (OSHPD / HCAI), • A strong understanding of excel spreadsheets, database-based software (WinEst), take-off software (On-Screen take-off) scheduling software (Microsoft Schedule, Primavera) is desired. While performing the duties of this job, the employee is frequently required to remain in a stationary position for up to eight hours. The employee occasionally is required to move to access people or workspaces. Constantly operates a computer and other office equipment, such as a calculator, copy machine and computer printer. The ability to optimally communicate is required. The employee may occasionally move up to 15 pounds. The working conditions of this position requires the employee to work inside an office environment. The environment for which this position functions may contain scents and fragrances. May be requested to work overtime and weekends. What we can offer you: As an employee owned organization, along with a culture built around safety and team collaboration, we offer a variety of employee benefits. In addition to the standard health, 401K, and paid time off benefits, we also offer: • An Employee Stock Ownership Plan (ESOP) to share in the company’s success along with an annual bonus based on overall company performance, • Wellness resources, including a health mentor, health assessments, maternity management, wellness challenges and life care, • Have equal access to opportunities and resources at all levels of the company, • Opportunity to grow and persevere including educational reimbursement, • Diversity, equity, and inclusion training programs, • Mentorship program The Boldt Company is an equal opportunity employer. If you are an individual with a disability and you need an accommodation or other assistance during the application process, please contact our Human Resources department. The Boldt Company does not accept unsolicited resumes from third party recruiters.

Job Description At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Senior Chiller Technicians to join our dynamic team. Why Mobile Air? Here are some of the perks & rewards: • Full-time positions with overtime and weekend opportunities, • Competitive hourly pay with quarterly bonus opportunities, • Health, Vision, and Dental Insurance, • Life Insurance, • 401k with company match, • Paid time off (vacation, sick days, holidays), • Career development and advancement potential, • As a Chiller Technician, you will lead maintenance, testing, and troubleshooting of our HVAC fleet, focusing primarily on large tonnage air conditioning systems and chillers. Your key responsibilities will include:, • Serving as the primary technician for large tonnage air conditioning systems and chillers, responsible for troubleshooting, pre-deployment testing, and repair services on-site., • Undertaking special projects, including researching obsolete replacement parts and assessing refrigeration conversion options for existing equipment., • Acting as a key contact during the transition of our rental fleet to remote monitoring systems., • Mentoring and training new Chiller and Service Technicians, especially those at Mobile Air/Resolute branches and depots, to foster skill development and enhance team collaboration., • Contributing technical expertise and operational support in our Turnkey program for chiller and large air conditioning rental installations., • Bachelor’s degree in HVAC, Refrigeration, or a related field, or equivalent hands-on experience (5-7 years) with large tonnage HVAC and chiller equipment., • Proven track record in diagnosing and repairing complex HVAC systems and chillers, with a solid understanding of system applications., • Universal Certification is required., • Strong consultative and leadership skills with a demonstrated ability to guide and develop team members., • Self-starter capable of working independently with minimal supervision., • Willingness to travel as needed to support operations., • Proficient in Microsoft Office Suite and ERP systems, with experience in data entry and reporting., • Preferred: 1-2 years of experience in a purchasing or supply chain role and prior experience in a manufacturing environment., • Proficient in computer use, including internet navigation, email communications, order-entry systems, and relevant software applications., • Strong organizational skills with attention to detail; ability to manage tasks effectively and prioritize responsibilities., • Positive attitude with strong professional written and verbal communication abilities., • Ability to lift and move equipment up to 50 lbs. using safe lifting practices., • Must be able to pass a DOT physical and drug test to operate company vehicles., • Valid driver’s license and a clean motor vehicle report (MVR) are mandatory. #LI-Onsite

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Enhances field productivity. Consistently perform projects under budget and on time., • Assists Construction Managers and HR in recruiting field workers., • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter Powered by JazzHR 1SIahagXoS

Job Description Location: Cerritos, CA (On site) | Type: Full Time | Flag: $40+ flag (Based Off Experience) What You’ll Do: * Inspect, diagnose, and repair brake systems, including discs, drums, rotors, calipers, hoses, and master cylinders. * Perform front-end repairs and alignments, including suspension components such as ball joints, tie rods, control arms, struts, and shocks. * Conduct road tests to ensure repairs are completed to manufacturer and safety standards. * Accurately document all work performed and recommended maintenance on repair orders. * Follow Ford repair procedures and use factory-approved equipment and tools. * Communicate with service advisors and management regarding repair progress and any additional needed work. * Maintain a clean and organized work area. * Ensure compliance with dealership safety policies and procedures. * Stay up to date on Ford technical bulletins and training requirements. What You’ll Need: • Full time availability. You’ll also need to be at least 18 years old, • A valid driver’s license and acceptable driving record, • Experience driving a range of vehicles; manual transmission a plus., • Exceptional commitment to safety, • Strong sense of accountability, • Excellent communication and a positive attitude, • Unlock Your Potential – Free Training & Limitless Advancement Opportunities to Skyrocket Your Career Growth., • Invest in Yourself – Tuition Reimbursement, • Health and Wellness First – Comprehensive Medical, Dental, and Vision Plans to Keep You and Your Family Thriving., • Enjoy Complimentary Group Life Insurance for Added Peace of Mind, • Your Network, Your Success – Employee Referral Bonus Program - Earn While Building a Stronger Team, • Shop and Save with our generous discounts on Sales, Service, and Parts at Any Norm Reeves Location, • Secure Your Future - Build Wealth with 401k Matching, • Smart Savings, Smart Choices – Section 125 Cafeteria Plan & Flexible Spending Account - Save on Taxes for Qualified Expenses

Job Description Security Installer Exciting opportunity to join a growing security team with the largest privately owned security integrator in the world. RESPONSIBILITIES: • Installs a variety of systems and equipment which may include security, fire alarm & life safety, and/or building automation with guidance as needed. Colleague is key interface for the provision of technical support and training for the customer and as such is accountable for maximizing customer satisfaction., • Familiar with basic blueprints, schematics, manuals, and other specifications to determine installation procedures unassisted, may require assistance with more complex specifications. Interprets manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools., • Operates systems to demonstrate equipment, commission new systems, analyze performance and identify malfunctions. Writes routine programs for systems., • Acts as “our customer’s best service provider” at all times, • Consults with engineering personnel to resolve unusual problems in system operation, maintenance, and warranty work., • May advise management regarding customer satisfaction, product performance, installation techniques and standards as well as suggestions for product improvements., • Executes many of the technical aspects of multiple projects with varying timelines and budgets including, programming, graphics development, start-up, certification testing, customer training, close-out documentation, and on-going technical support etc.., • Identifies potential project risks, communicates to appropriate parties and assist in the development and implementation of strategies to minimize impact and to control deviations from estimated costs and project deadlines., • Works closely with the Project Manager and/or Operations Manager and assists in the overall coordination of specific projects; This is a Direct Hire position. This position is on client sites in the La Palma area and surrounding regions, or in office with little to no overnight travel. This is a great opportunity with a wonderful team! Growth opportunities! You will be provided a company truck, tools, PPE equipment, uniform,cell phone and laptop. REQUIRED SKILLS: • 3+ years of installation experience security (Access control, Intrusion, CCTV, etc.), • Security certifications/experience with (Lenel, Genetec, Software house, Bosch, Avigilon, DMP, etc.), • At least 3 years experience working for another commercial security integrator, • Solid mechanical and electrical aptitude (e.g. works with a variety of hand and power tools such as drill, screwdriver, wire stripper, hacksaw, crimper)., • Excellent personality & communication skills, • Strong customer service skills, • Valid driver's license

Job Description • We are hiring immediately for a full time SERVICE TECHNICIAN position., • Location: UltraServ - 16722 Parkside Avenue, Cerritos, CA 90703. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, hours may vary; some weekends are included. More details upon interview., • Requirement: Previous related experience is preferred. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Repairs, maintains and assists in the installation of vending machines and equipment. Essential Duties and Responsibilities: • Responds to dispatch calls for machine repairs using company-owned vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to determine causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines; maintains equipment inventory., • Prepares machines for installation at accounts; assists in installations and removals., • Sets up and operates mechanical equipment and small hand tools, such as drills, grinders and welding torches, for machine repair. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here for information on additional company-provided time off benefits. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1475282 Canteen We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionCompany Description Company Info: Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! About The Role: The General Service Technician role is full time or part-time and is an hourly position based on needs of the business. The General Service Technician is responsible for performing basic routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions while ensuring that guest expectations for time commitments and quality are consistently met. Job Description Responsibilities: • Accurately perform basic vehicle services and repairs effectively and efficiently in accordance with Monro standards of operation., • Tire Services – perform wheel removal, balancing, patch/plug repairs, changing, mounting, installation and TPMS service and repair., • Vehicle Services – perform lubrications, oil changes, basic maintenance (e.g.: bulb, wiper blade and filter replacements, etc.), battery testing and installations., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs., • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures., • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while observing all local traffic and safety laws., • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc. Qualifications: • High School Diploma or equivalent is preferred., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Ability to take initiative in identifying problems, collecting data, and establishing facts to make practical decisions and recommend solutions., • Strong customer service skills, • Strong verbal and written communication skills with the ability to convey technical issues and write routine reports. Additional Information Work Environment & Physical Requirements: This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. General Service Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, and lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Performance based incentives, • Paid vacation and holidays for Full Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time Teammates, • Employee Access Perks, • Career Advancement Opportunities This summary is not an all-inclusive description of job duties. Other job duties and responsibilities may also be assigned by the incumbent’s supervisor at any time based upon the Company’s needs. Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Specialty door manufacturer located in Pico Rivera is looking to hire an Estimator to join their team. Alternative Schedule (40 hours): • Monday- Thursday 7:30am-5:15pm (9 hrs) Job Summary: Responsibilities include, but are not limited to, a variety of estimates, assisting with the interdependence between the customer and the regional sales managers. Work involves; downloads of bidding requirement, maintaining a library of the sales department’s quote correspondence, maintenance and utilization of the estimating spreadsheets, draft bids, and delegation of qualified lead information to the regional sales manager. Position Summary: • Responsible, for the communication and coordination of information that will ultimately lead to an estimate and drafting of a quote., • Maintains customer database by inputting customer profiles and updates, by inputting quotes/bids and contact information, preparing and distributing monthly follow up reports., • Updates manager by consolidating, analyzing, and forwarding daily bid requests., • Contact regional sales managers to resolve any omissions in the quote request, such as missing specifications, details, contact information., • Set up spread sheets of quotes as directed and concerning the product line. Identify any line item details that the sales manager can analyze for pricing concerns., • Updates job knowledge by participating in educational opportunities, internal or approved industry training., • Including attendance of forums at company corporate office., • Accomplishes department and organization mission by completing related results as needed., • Obtain and maintain a thorough knowledge of company sales methods and procedures, general product knowledge and product characteristics, general and technical specifications of products for sales usage, estimating procedures, and file management., • You will be required to create and develop goals for your specific job function that will support our organizational goals., • You must engage, and complete assignments as directed, skill set and work scope by your salesman and the leadership., • Ability to perform the essential functions of the job, • 2-3 years progressive sales admin experience required, preferably in a customer service driven company, • Strong work ethic, loyal, trustworthy, honest, team player, • Proven ability to multi-task and have regular contact with executives, managers, and employees, • Ability to work cooperatively with a variety of personality types, • Excellent written and verbal communication skills, • Must possess superior organizational skills and attention to details, • Ability to work with minimal supervision, • Computer literate with proficiency in Microsoft Office, • Must possess problem solving skills

Job Description Company TRAK Machine Tools (TMT) is a manufacturer of TRAK CNC machines and Proto TRAK CNC controls. Our headquarters is located Rancho Dominguez, CA, just south of Los Angeles with a second facility located in Henderson, NV. We have established direct and distributor sales/service organizations in America and Europe, with sales expanding in other markets internationally. Reports To Machine Shop Supervisor Job Overview TRAK Machine Tools is seeking a skilled and experienced CNC Lathe Machinist Level 2 to support the production of high-precision components in our vertically integrated machine shop. This role is ideal for a self-motivated individual with 5+ years of CNC Lathe machining experience who is comfortable working independently, performing their own setups, and holding tight tolerances on complex parts. You’ll work on Siemens Sinumerik One, ProtoTRAK, and Mazak equipment — including proprietary machines we design and manufacture. Ongoing training is provided to familiarize you with our controls and processes. Responsibilities • Set up and operate CNC machines independently (mills, lathes, etc.) for production and prototype parts, • Read and interpret engineering drawings and specifications, • Machine parts to precise tolerances (±0.001"), • Inspect parts using precision measuring tools (micrometers, indicators, bore gages, etc.), • Identify and resolve machining issues (tool wear, surface finish, dimensional deviations), • Collaborate with programming and engineering staff to improve process quality and efficiency, • Learn and adapt to new machines, software, and in-house manufacturing technology, • Assist in training and mentoring Level 1 machinists when appropriate, • Maintain a safe, clean, and organized work area, • Run multiple machines simultaneously as assigned Qualifications • Minimum 5 years of hands-on CNC lathe machining experience, • Strong knowledge of machining principles, materials, feeds, speeds, and tooling, • Proven ability to perform full setups and run production with minimal supervision, • Proficient in reading engineering drawings and applying GD&T, • Experience holding close tolerances (±0.001") in a production environment, • Effective communication and teamwork skills, • Willingness to learn company-specific machines and processes, • Familiarity with Siemens Sinumerik, ProtoTRAK, or Mazak controls, • Experience machining a wide range of materials, including aluminum, cast iron and various steels, • Background in a job shop, toolroom, or custom machine environment, • Exposure to lean manufacturing or continuous improvement practices DISCLAIMER The above description is not intended to be interpreted as an exhaustive list of skills, qualifications, and duties for this role. Southwestern Industries, Inc. – TRAK Machine Tools retains the right to change or assign other duties to this position. Southwestern Industries, Inc. – TRAK Machine Tools is an Equal Opportunity and Affirmative Action Employer. All applicants will receive equal consideration for employment without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law. Southwestern Industries, Inc. – TRAK Machine Tools is committed to providing access and reasonable accommodation in its employment opportunities in accordance with the Americans with Disabilities Act and other applicable laws.

Job Description Our client is a Nationwide and Multi-Regional Top Workplace of 2023! They are an Employee-Owned Company and their foundation is built around construction done right by people who care, in partnership with people they care about! As a Senior Project Manager you will grow your skills, knowledge, and learn best practices from an industry innovator that is also employee-owned! To be successful in this position you will need to be open to learning, disciplined and systems-driven, detail-oriented, comfortable working independently and have a genuine interest in helping team members with a positive and pro-active attitude. Duties • Manage the clients expectations, • Provide project leadership and supervisory skills, • Project document control ensuring project documents are complete, current, and managed appropriately, • Manage/prepare cost proposals and change orders, • Development of project budgets and buy-out/contracting of the work, • Project accounting functions including preparing Owner billings and reviewing/approving Subcontractor progress payments, • Responsible for budgets and cost control throughout the life of the project, • Manage the submittal, RFI, and project documentation requirements., • Develop and manage CPM schedule, • Manage project subcontractors including coordination, procurement of materials and equipment, monitoring budget and cost, manage billings, • Coordinate with project architects, designers, owners, subcontractors, and field personnel Requirements • Commercial and/or Public Works experience managing multiple construction projects or a single larger and complex project., • Graduates of a four-year degree program in construction management, construction science, or other industry-related degree programs preferred, • Strong understanding about current construction methods, materials, and regulations, • Ability to work under pressure and coordinate numerous activities and groups of people who need to cooperate to achieve maximum efficiency, • Must have good communication, teamwork, and organizational skills, • Fluent in Microsoft Office Suite and MS Project scheduling (or other scheduling software)., • A valid drivers license and acceptable driving history is required Special Consideration • Previous experience working on projects as part of a larger school bond program (ie. SDUSD, LAUSD, etc.), • Procore project management software experience, • Higher Education market sector experience, • Healthcare market experience Benefits • Employee Stock Ownership Plan (ESOP), • Profit-Sharing, • 100% employer-paid Health/Dentalpremiumsfor team members, • Generous Vacation and Sick Time off, • Nine (9) Paid Holidays - Including your Birthday!, • 100% employer-paid Life, AD&D, and Long Term Disability insurance, • Retirement plans with company contribution, • Subsidizedtuition on Child Care, • Health/Dependent care FSA's, • Making a difference in the communities you serve Acknowledgments Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law. Employment Type: Full time Location: Norwalk, CA

Job Description Solid State Devices, Inc. High Density, High Performance, and High Reliability Products for Aerospace & Defense SSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications. Assemblers We are currently seeking motivated Assemblers to join our dynamic team in the Wafer Fab. This is a great opportunity to grow within a high-tech, cleanroom-based manufacturing environment. As a team member in the Wafer Fab at Solid State Devices, Inc., you will be trained to perform the following tasks: Sand Blast Dicing - Precision cutting of semiconductor wafers using sandblasting equipment, Pinbond / Leadbond - Bonding of diode components to pins or leads using specialized tools, Diode Precap Activities - Pre-sealing inspection and preparation of diodes, Diode Passivation - Application of protective coatings to semiconductor devices, Diode Visual Mechanical Inspection - Visual and mechanical quality checks to ensure part conformance, Fill Out Manufacturing Process Procedures (MPPs) - Accurate completion of documentation for each production step, Read and Interpret Figure Drawings & Assembly Instructions - Follow detailed technical drawings and written procedures. In addition, you will be trained to perform the following specialized tasks: Diffusion Boat Load - Safely load semiconductor wafers into quartz boats for high-temperature diffusion processes, Diffusion Run - Operate and monitor diffusion furnaces to introduce dopants into wafers, Metal Evaporation - Perform thin-film metal deposition using evaporation systems, Metal Thickness Measurement - Use tools such as profilometers or ellipsometry to measure metal film thickness, Metal Sinter - Conduct thermal processing to bond metal contacts and improve material properties, Diode Test - Perform electrical testing on diodes to verify performance specifications, Wafer Stacking - Carefully handle and stack wafers for processing and transport, Wafer Mount for Saw Cut and Dismount - Prepare wafers for dicing by mounting them on tape, and remove them post-cut, Wafer Saw Dicing - Program and operate wafer saws, including blade and flange changes, to precisely dice wafers, Diode Test - Perform electrical testing on diodes to verify performance specifications. All tasks include comprehensive hands-on training to ensure safety, accuracy, and process compliance. Comprehensive on-the-job training will be provided. Preferred Qualifications: Microsoft Office Suite (Excel, Word, Outlook) and 6-months of working experience in a relevant production or manufacturing position Education: High School Diploma Must be able to perform basic math calculations (addition, subtraction, multiplication, division). Schedule: Full-time / Monday - Friday / 6:30am - 3:00pm Salary: $17.00 - $18.00 per hour / Bi-Weekly Pay Schedule (Direct Deposit) This is not a guarantee of compensation or salary, as final offer amount may vary based on experience. Solid State Devices, Inc. proudly offers a comprehensive benefits package to all regular full-time employees, which includes: • Medical, Dental, and Vision Insurance, • Group Life Insurance & AD&D (Accidental Death and Dismemberment), • Voluntary Term Life Insurance & AD&D, • Paid Time Off (PTO), • 8 Paid Holidays Solid State Devices, Inc. is an Equal Opportunity Employer We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. I understand that if I am extended an offer of employment, it will be conditional upon my successfully passing a post-offer, pre-employment Background and Drug Screen. Upon employment, I agree to the following: • Signing an Employee Creation Assignment & Non-Disclosure, • Abiding by all rules, regulations, and performance standards of Solid State Devices, Inc., • Application forms and materials are the property of Solid State Devices, Inc.

Job Description Overview PharMerica is hiring a Full-Time Pharmacy Order Entry Technician in Cypress, CA! Join our closed-door pharmacy team where you’ll work in a non-retail environment, dedicated to meeting the pharmaceutical needs of long-term care and senior living clients. If you’re passionate about delivering exceptional service and high-quality care, we want to hear from you. Apply today and become part of a team committed to making a difference! Schedule: 8 hour shifts ; 230pm-11pm Varying days & Alternating weekends Benefits and perks for you! • Medical, Dental, Vision insurance, • Health Savings & Flexible Spending Accounts (up to $5,000 for childcare), • Tuition discounts & reimbursement, • 401(k), • Company Paid Time Off, • Shift Differential, • DailyPay, • Pet Insurance Responsibilities How YOU will benefit: • Supportive team with room to work independently, • Ongoing training and career growth, • Advancement opportunities in a growing company, • Referral bonuses, • We cover Pharmacy Technician license fees (new hires & current staff eligible) As a Pharmacy Order Entry Technician you will: • Enter and verify medication orders in a computerized system with a high level of accuracy and efficiency., • Conduct basic drug calculations, including dosage and conversion tasks., • Investigate and resolve pharmacy claim denials; perform follow-up actions in POS systems., • Stay current with Medicaid claim regulations and ensure compliance in processing., • Track unpaid or delayed claims; generate reports for management., • Provide excellent customer service in line with company values and policies., • Assist with medication preparation and dispensing under Pharmacist supervision., • Support additional pharmacy tasks and operations as directed by management. Qualifications Qualifications Required: • High School diploma or equivalent., • Pharmacy Technician license as required by state, • Experience in a pharmacy setting and medical terminology., • Ability to operate a computer; recognize and identify medications.

Job Description will be assembling pieces of metal and plastic. Must be able to use hand and power tools. Will be lifting up to 50lbs consecutively. Company DescriptionGreat working environment.Great working environment.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grow into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-leveler’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Take a peak at our benefits page to learn more about the Benefits offered to all Miner employees. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job Description Skilled Painters Wanted for Steady Commercial Work COMMERCIAL PAINTING EXPERIENCE REQUIRED Cal Spectrum Painting is looking for experienced commercial painters who can hit the ground running. If you know how to prep, brush, roll, spray, and stay productive on site — we have consistent work ready for you. We’ve been operating since 1994 and focus on large-scale commercial remodels across the U.S. This is a hands-on job that requires real field experience, a strong work ethic, and the ability to adapt to different job sites and crews. What You’ll Do * Perform interior and exterior painting on commercial projects * Prep surfaces: masking, sanding, patching, and cleaning * Apply coatings using brush, roll, and spray equipment * Work with your crew to meet deadlines and maintain site standards * Contribute to cleanup, site setup, and breakdown * Support occasional specialty coatings or graphics work (when required) Requirements * Solid field experience in commercial painting * Proficiency in brush, roll, and spray techniques * Valid driver’s license and reliable transportation * Able to work on rotating job sites with changing crews * Must bring paint-appropriate clothing (tools provided on site) * Open to California Jobs or Travel availability up to three weeks at a time (for travel crews) * Open to background checks and drug testing, if requested Why Work With Us * Competitive pay based on experience and reliability * Travel jobs include full support: flights, hotels, stipends, gas, and vehicle * Steady pipeline of commercial work across California and beyond * Straightforward team culture — show up, do the work, and get paid on time * Opportunities to take on more responsibility depending on performance Travel Perks (For Travel-Based Crews) Please note: These benefits are only provided for projects that require travel. Not all job sites qualify. * Paid flights or transportation to job sites * Hotel accommodations provided * Daily food stipend * Gas covered * Company vehicle for job-related travel Company DescriptionCal Spectrum Painting is a family-owned commercial painting company founded in 1994. Based in California, we lead large-scale remodel and renovation projects across the U.S. We’re currently building crews of dependable, hard-working painters — from those new to the trade to experienced professionals ready to lead.Cal Spectrum Painting is a family-owned commercial painting company founded in 1994. Based in California, we lead large-scale remodel and renovation projects across the U.S. We’re currently building crews of dependable, hard-working painters — from those new to the trade to experienced professionals ready to lead.

Job Description As a Technical Field Supervisor at Delta Fire Equipment, Inc., you are responsible for leading field operations, particularly in the areas of fire alarm and access control systems. This full-time, exempt role blends hands-on technical work with leadership and mentoring responsibilities. You serve as a key liaison between field technicians and project management, ensuring that work is executed to a high standard of quality, safety, and code compliance. Key Duties Include: • Installing, troubleshooting, and servicing fire alarm and access control systems., • Providing technical guidance and mentoring to junior technicians., • Coordinating service execution and responding to complex field issues., • Identifying and initiating upsell opportunities for system upgrades and enhancements. Systems Involved: • Addressable and conventional fire alarm systems, • Detection, notification, and communication devices, • Access control panels, readers, electrified door hardware Compensation & Benefits: • Base Salary: Paid biweekly, • After-Hours Field Response Pay: $250 per qualifying event, • Annual Upsell Bonus: 3% of net profit on eligible material sales, • Business Phone Stipend: $75/month, • Company Laptop: Provided, • Company Vehicle or Mileage Reimbursement: Includes fuel reimbursement for company vehicle, • 401(k) Plan: Eligible to participate upon hire, • Medical Insurance Premiums: Offset via monthly stipend

Job Description Wilcox Machine Company, a Los Angeles based machine shop, is seeking an experienced individual to estimate, plan, and manage job shop machine work on individual components and large assemblies. Job duties include project management, and interfacing with customers. Established in 1956, we specialize in CNC and conventional machining of large commercial, aerospace, and government parts and assemblies. Our work ranges from parts weighing a few hundred pounds to over 100,000 pounds. We primarily do prototype and low volume production work. Qualified candidates should have strong blueprint reading, math, and customer interfacing skills. Prior experience estimating and production planning of machined parts and assemblies is highly desired. CAD/CAM (Mastercam) and/or prior machining experience on CNC/Conventional horizontal boring mills, machining centers, lathes, and VTLs is a plus. We offer excellent salary, medical/dental benefits, and a 401K program. Interested candidates should send resume, including employment history via e-mail. Company DescriptionWilcox Machine Company, a well-established machine shop in Los Angeles since 1956, is seeking experienced CNC and conventional machinists to join our team. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work.Wilcox Machine Company, a well-established machine shop in Los Angeles since 1956, is seeking experienced CNC and conventional machinists to join our team. We specialize in machining large commercial, aerospace, and government parts and assemblies, handling components ranging from a few hundred pounds to over 100,000 pounds. Our focus is on prototype and low-volume production work, and we are currently experiencing high demand with multiple large contracts and ongoing job shop work.

Job Description About the Role We are seeking a skilled Fire Alarm Foreman to lead field crews on commercial and residential fire alarm installations. This role is responsible for overseeing day-to-day jobsite activities, ensuring proper installation of fire alarm systems, coordinating with other trades, and maintaining safety and quality standards. The ideal candidate has strong hands-on fire alarm experience, understands codes and compliance requirements, and can manage technicians while keeping projects on schedule. Key Responsibilities * Lead and supervise fire alarm installation crews on active job sites * Install, program, test, and troubleshoot fire alarm systems and associated devices * Read and interpret fire alarm prints, riser diagrams, schematics, and scope documents * Coordinate daily work with the Project Manager, GC, and other trades * Ensure all installations meet NFPA codes, local jurisdiction requirements, and company standards * Conduct site walks to verify readiness, system layout, and material needs * Train and mentor technicians on proper installation and testing procedures * Maintain accurate daily reports, track materials, and communicate job progress * Ensure all jobsite safety protocols and OSHA requirements are followed * Assist with inspections, closeout documentation, and final system testing Qualifications * 4+ years of fire alarm installation experience * 12 years in a lead or foreman role preferred * Hands-on experience with common fire alarm systems (Honeywell, Silent Knight, Notifier, Bosch, EST, Fire-Lite, or similar) * Ability to install, terminate, and program fire alarm devices and panels * Strong understanding of NFPA 72 and local fire codes * Ability to read blueprints and understand system layouts * Strong leadership, communication, and troubleshooting skills * Valid drivers license and reliable transportation * Ability to work safely and manage jobsite safety for the crew Why Join Us * Competitive compensation based on experience * Long-term work with steady projects * Path for growth into Superintendent or Project Manager roles * Supportive team environment with opportunities for additional training * Company vehicle or mileage reimbursement depending on company policy

Job DescriptionSalary: $26.77 + commission Join Our Team!!At World Oil we strive to be an employer of choice by recruiting, developing, retaining, a high performing and diverse workforce. As a family-owned company, our focus in the work life balance fosters a healthy, safe, and productive work environment for all employees. More than 75 years later, learn more About Us at:. World Oil Environmental Servicesrecycles, produces, and transports vital petroleum products and provides important environmental services in California and throughout the western United States. We deliver more than just high-quality, high-performance products and services. We believe in doing things right and doing them well every day.World Oil offers competitive hourly pay. Company Benefits include multiple Medical/ Dental plan options, Vision, Life Insurance, 401(k) with employer match, STD/LTD, Paid Holidays, Vacation, Sick Time, and so much more! We are seeking an experienced Local Field Services Commercial Driver/Technician for aFull-time position in Compton, CA. Position Summary: The Field Services Driver/Technician performs a variety of field service requirements necessary to Operations department. This role must be knowledgeable in using machines and tools to be successful. The Field Services Driver/Technician reports directly to the Regional Manager. Essential Duties and Responsibilities: The essential functions include, but are not limited to the following: • Performs confined space entry decontamination procedures for customers and internal projects., • Works in IDLH and extreme hazardous atmospheres under Level A or B PPE., • Completes proper packaging of waste to maximize efficiency and maintains compliance., • Operates 4600 PSI hot water pressure washers outside and inside confined spaces., • Operates 7000 PSI hydro blasting and jetting machines and inside and outside confined spaces., • Works with thermal, chemical, and pneumatic processing equipment for air purging and flushing., • Performs sampling procedures on tanks, pits, barrels, clarifiers, machinery, trucks, cooling towers, and unknowns., • Isolates, bleeds, and drains high pressure steam and chemical lines inside and outside confined spaces. Other Functions: • Responds immediately to World Oil spills and communicates with customers., • Performs other related duties as assigned. Required Qualifications: • High School Diploma or equivalent (G.E.D.)., • Commercial Class A/B Drivers License with all endorsements., • 1 year of experience driving a commercial vehicle and maintaining a Commercial Class A/B drivers license preferred., • Ability to lift up to 50LBS., • Manual and Automatic Transmission required, • Must be able to work Monday through Friday (available to work on Saturday with advanced notice). Varied shift hours based on scheduled work. EEO Statement: It is the policy of World Oil and its subsidiaries to provide equal opportunity for all applicants and employees. The Company does not discriminate on the basis of race, age,color, religion, sex/gender, gender identity/gender expression, sexual orientation, marital status, medical condition, military/veteran status, national origin, ancestry, disability, genetic information, reproductive health decision making, or any other status protected by state or federal law.

Job Description Join our Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever and it’s not because of what we do, but how we do it. It’s simple, our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS: • Salary Range: Competitive based on Individual Experience, • Medical, Dental & Vision Coverage, • 401 K Program, • $100K Life Insurance, • A competitive and Rewarding Environment ABOUT US: Tomarco Contractor Specialties LLP, dba ISAT Total Support, designs, manufactures, and distributes non-structural engineering and design systems for commercial construction applications. Founded in 1977, Tomarco/ISAT Total Support has a 46-year history of continuous growth and prides itself on being the global leader in the development and sale of innovative engineering fastening systems and engineering solutions. ISAT Total Support strives to innovate and evolve our products, services and technical offering to achieve customer value, superiority and uniqueness. Our professional staff of salespeople, operations, manufacturing, and professional Civil, Electrical, Mechanical and Structural Engineers has been involved from concept to completion in many of the largest projects in the United States and internationally, including hospitals, convention centers, sports venues, data centers, office building, manufacturing, and schools. Job Description: As we continue to advance in the dynamic field of construction, we are excited about the prospect of you contributing your skills and expertise to our team. Your role as a Warehouse Associate/Grinder will play a crucial role in a range of tasks to support the fabrication and welding processes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Keeps the shop space and equipment clean, well-maintained, and organized., • Adheres to safety protocols for the proper storage and disposal of materials., • Actively participates in the manufacturing and fabrication of finished metal products., • Utilizes welding and fabrication techniques to meet project requirements., • Installs and repairs various equipment and components using welding and fabrication skills., • Collaborates with the team to ensure accurate and efficient installations., • Reads and interprets blueprints to understand project specifications., • Follows provided blueprints to ensure accurate fabrication and welding., • Calculates material measurements to verify compliance with product specifications., • Ensures precision in cutting, welding, and assembling metal components., • Conducts tests to evaluate the quality and tolerance of welds., • Performs quality checks to ensure products meet established standards., • Maintains a clean and orderly work area to ensure a safe and efficient working environment., • Adheres to cleanliness standards for tools, equipment, and workspaces., • Capable of completing work under minimal or no supervision., • Demonstrates a high level of self-motivation and initiative., • Adheres to safety regulations and wears appropriate PPE at all times., • Ensures that all team members comply with PPE requirements. KEY SKILLS: • High School Diploma/GED, • AWS D1.1 Structural Steel Certification with FCAW and SMAW is preferred but not needed Further Qualifications – The successful candidate must pass a background check. *Equal Opportunity Employer