Construction & Trades jobs in Pasadena, CA - Page 8Create job alerts

Job Description Mission Driven, Community Focused About | Charles R.Drew University of Medicine and Science (cdrewu.edu) Charles R. Drew University is located in the Watts-Willowbrook area of south Los Angeles and was founded in 1966 in the wake of the Watts uprising. CDU was founded to address inadequate medical care in the region and to provide equitable medical education opportunities for under-represented students. CDU offers the only historically black Doctor of Medicine program west of the Mississippi, and is strongly invested in the local and regional community. The university leads multiple partnerships and programs to provide equitable healthcare resources in a variety of south Los Angeles neighborhoods. TITLE: SIMULATION LAB TECHNICIAN DEPARTMENT: Mervyn M. Dymally College of Nursing JOB CODE: SLTC DATE: 1/29/2014 (rev 9/2024) REPORTS TO: Assistant Director, Simulation Education DLSE STATUS: NON-EXEMPT SALARY RANGE: min $24.13, mid $34.49, max $44.84 Under the supervision of the Assistant Director, incumbent will oversee, manage, and operate complex simulation apparatuses, equipment, machines, PC’s, AV equipment and other medical simulation equipment. This position will coordinate the set-up, use, and maintenance of all simulation / practice equipment in the MMDCON. In collaboration with the Director, this person will also provide administrative support to facilitators and/or outside affiliates for sessions, train potential users on programming scenarios, set-up the simulation sessions, orient participants to the simulators, run simulation operations during sessions, and provide feedback to faculty. This position will provide consultation and support for complex simulation manikins and equipment to incorporate into College of Nursing (CON) programs. The Simulation Lab Technician will consult with CON faculty and staff on all lab courses and lab availability, oversee and manage students’ needs for supplies and equipment during lab hours. Essential Duties and Responsibilities: Technical Support • Independently set up skills and simulation labs with needed equipment and supplies for educational sessions., • Operate computer-based multimedia systems and their components, including operation of digital cameras, video cameras, audio/video, Learning Space software, monitors, LCD projectors, and other equipment., • Assist faculty and students with different simulator technologies ranging from anatomic models and task trainers (low fidelity) to computer-based simulations and full body patient simulators (high fidelity)., • Operate simulation-based software, including Laerdal LLEAP, Gaumard UNI, Learning Space, CAE, and Cerner, • Perform pre-simulation activities including: powering up simulators, mannequins, patient monitors, AV equipment and other electronic equipment and tests all to ensure proper functioning prior to each simulation session, programming patient scenarios, preparing scenario props, stocks patient rooms and equipment carts with supplies and equipment needed for specific simulation scenarios, including medications, prepares mannequins as appropriate to the simulation scenario; including filling simulated blood and body fluid chambers, applying wounds and dressings, inserting tubes, using moulage., • Perform post-simulation activities including operating debriefing equipment, clean patient rooms; including changing linens, cleaning surfaces, draining simulated blood and body fluids from mannequins, cleaning mannequins., • Program simulation scenarios and revise scripts based on feedback from faculty., • Serve as the simulation operator during educational sessions., • Provide orientation information to faculty, students and visitors as needed., • Install new hardware and software on simulation equipment and perform upgrades as necessary; perform operational checks on equipment; interface with the equipment manufacturers regarding diagnose, troubleshoot, and repair malfunctioning equipment; consult with technical support as necessary; send out for repair as appropriate; oversee scheduled maintenance. Collaborate need and update progress with Simulation and Skills Lab Coordinator., • Oversee and participate in the ordering and maintenance of supplies, materials, and equipment; acquire and maintain an inventory of materials for instructional programs; create database for inventory of supplies; store, discard and rotate materials according to standard procedures; receive, assemble and test new equipment., • Conduct routine equipment maintenance, inventory updates, and equipment purchases., • Proactively seek and maintain proficiency and provide reports on existing and emerging technologies. Including basic theory, design and implementation; participate in technical training as necessary; attend conferences to stay current with simulation technology., • Train faculty and other Simulation Center staff in the operational aspects of simulation. Evaluate new equipment and identify opportunities for technology improvement and integration into healthcare education., • Assist instructors, staff and students in the use of a variety of laboratory equipment, materials and supplies in an instructional setting; use and setup AV equipment to record simulation sessions., • Maintain a clean and safe learning environment, lab environment and organized supply room., • Provide administrative support to ensure smooth daily operation of the simulation and skills labs., • Attend all meetings of skills lab staff and clinical faculty for issues pertaining to the lab and follow through assigned action plans., • Order office supplies, simulation equipment, clinical supplies. Maintain inventory to assure appropriate levels of all supplies are adequate., • Dispose of biological and hazmat waste used in skills and simulation labs in compliance with CDU, State, and Federal guidelines., • Provide support and work with faculty on tours of the simulation or skills labs., • Serve as a liaison resource to the CON Simulation and Skills Labs with faculty, staff, students, and the public in a positive and professional manner. EDUCATION: • Regionally accredited 2-year technical degree or equivalent related training in computer science and/or health care-related field., • Combination of education and experience within last 5 years will be considered., • Three years of experience with electronics technology within the last five years., • 1-year experience with simulation in nursing or health care related preferred., • Demonstrate experience and knowledge of PC/Mac computer software: MS word, Excel, Outlook., • Demonstrate experience and knowledge of AV equipment., • Demonstrate ability to complete work accurately and in a timely manner under workload and deadline pressures, fluctuating workload, and frequent interruptions by prioritizing and multitasking., • Excellent ability to establish and maintain cooperative working relationships with supervisors, faculty, staff and students., • Excellent skill in independently setting priorities and time management, which accurately reflects the relative importance of the job., • Demonstrates strong oral and written communication and interpersonal skills., • Demonstrate ability to develop strong and effective professional relationships with vendors, affiliated, partner hospitals, etc., • Excellent ability to work as part of a team., • Demonstrate ability to work independently with minimal supervision., • Demonstrated knowledge of biological waste disposal using hazmat materials., • Demonstrate ability to work with persons of various backgrounds and ethnicities., • Ability to work flexible hours, including evenings and weekends when needed. Consistently available during working hours., • Demonstrate knowledge and experience independently programming simulation manikins and virtual phlebotomy machines., • Demonstrate knowledge of Medical Terminology, Physiology, Pharmacology and equipment. Excellent benefits: Medical, dental, vision, retirement plan, vacation accrues on first day of employment, wellness programs, 17 paid holidays per year, up to 16 hours of paid time off to participate in community service and much more. Full Time EEO Statement: Charles R. Drew University is committed to Equal Employment Opportunity. Applicants will be considered without regard to gender, race, age, color, religion, national origin, sexual orientation, genetic information, marital status, disability or covered veteran status. Fair Chance Statement: Charles R. Drew University of Medicine and Science will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local “Fair Chance” laws.

Job DescriptionAbout Company We are seeking a& Biomedical Equipment Technician III to support a high-performing hospital team in Los Angeles. This critical role ensures the safe and effective operation of complex clinical devices used in patient care. You’ll apply advanced technical skills, mentor junior technicians, and maintain a strong focus on safety, service quality, and regulatory compliance. Key Responsibilities: * Troubleshoot, repair, maintain, and calibrate advanced clinical devices such as Servo U/I, V60s, Trilogy EV300 ventilators, GE Anesthesia, and other patient care equipment. * Lead inspections, testing, and preventive maintenance in accordance with regulatory standards. * Mentor and support junior biomedical technicians in professional development and technical procedures. * Act as a liaison between clinical staff and technical teams to identify and resolve equipment-based issues. * Maintain accurate documentation and service reports. * Order parts and manage service costs within assigned budgets. * Ensure safety compliance, proper equipment functioning, and reliability at all times. Required Qualifications: * Associate’s Degree (or equivalent experience) in Electronics, Biomedical Engineering, or related technical discipline. * 7+ years of hands-on experience repairing, calibrating, and maintaining clinical equipment in a healthcare setting. * Proficient in servicing critical care equipment including ventilators, anesthesia units, and telemetry systems. * Strong working knowledge of electronic circuitry, schematics, and technical diagrams. * Demonstrated leadership and mentoring abilities in a technical or clinical setting. * Must have a valid driver’s license and clean driving record. Nice-to-Haves: * Experience supporting telemetry, operating room technologies, or OR expansion projects. * Basic networking knowledge for medical equipment integration. * Strong hand-eye coordination, color vision, and manual dexterity. * Familiarity with healthcare technology management standards (HTM). Additional Information: This role offers a comprehensive benefits package, including: * Medical, Dental, Vision, and Wellness Programs * 401(k) with Matching Contributions * Paid Time Off and Company Holidays * Career Advancement Tuition Reimbursement Programs

Job DescriptionIf you like to innovate, are self-reliant with a strategic mind and forward-thinking solutions approach and interested in giving your full potential and grow with us, this position may be for you. We are a social and environmental responsible Company. Our commitment to safety, community, belonging adaptability, quality and continuous improvement are part of our personality. We are looking for a proactive, independent and experienced Construction Inspector with strong expertise On building disciplines. Position Description Summary The position of the Construction Inspector will support LAWAs construction inspection and work as a member of LAWA Quality Assurance & Construction Inspection Division across multiple projects within LAWAs Tenant Improvement Program primarily focusing on building disciplines. *Candidates must possess a minimum of 5 years of experience performing inspection *Candidate must demonstrate a clear understanding and interpretation of LA City Building Code & ADA Requirements *Successfully hired candidates must be able to pass a background check and possess a LAWA SIDA badge prior to official start. *Candidates must have the ability to walk extremely long distances during the shift as this is the primary means of traversing between expansive terminals. *Candidate must be able to climb stairs, ladders, scaffold, and crawl into areas associated with the work taking place in the terminals. *Candidate must be able to work the day, swing, modified, or night shifts, including weekends as dictated by the contractors schedule. Essential Job Duties • Conduct comprehensive daily inspections across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Verify contractor compliance with local jurisdictions requirements, building codes and LAWA-specific proprietary standards., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed., • May be tasked to Track and document time-and-material work, field changes, and job quantities Clearing, grubbing & demolition of building structures. Excavations, trenching & shoring. Grade & elevation survey. Structural Backfill & compaction for underground utilities. Structural & Nonstructural concrete work. Formwork, Footings & micro piles. Sewer & Storm drain inspection. Metal stud framing drywall installation & interior finishes. Door & hardware with its components. T bar ceilings, hard lids & other fire rated components Hardware/Software Knowledge • Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Xcel, Word, PM Web, Adobe Pro, Bluebeam, etc.)., • Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision, • Candidates must possess a minimum of five years of experience performing inspection, • Training in the use of fall protection equipment and harness with lanyard., • Confined space awareness certification., • Cal OSHA 30 hr. training and certificate., • ICC certifications and Deputy Inspector Licenses are preferred but not required., • Inspectors with good knowledge and ability to inspect large scale construction of airport and public building facilities, which may include steel and concrete structures, architectural finishes and components, and other construction related to the airport terminal operations to ensure conformance with safety regulations, plans, specifications, and other applicable documents., • Possess good knowledge of LA City Building codes and ADA requirements. Experience in but not limited to inspecting demolition and the construction of buildings from start to finish., • Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards., • A strong understanding of diverse requirements., • Excellent communication and time management skills.Education/Training, • High School diploma (or equivalent)Element-Specific Requirements/Notes, • May assume other duties as required/needed., • May be required to work various shifts, including day, swing, and night., • Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules.

Job Description WHY WORK FOR US? We are mission and values driven and your contributions will make a difference. We make a positive difference in people's lives and help an average of 23 people per week to find a place to live. If you join us, you will be able to advocate for change while also working with influential people who effect changes in policy and devote time to issues of racial and social justice. We prioritize your work/life balance and provide various scheduling options in addition to generous time off, health, and wellness benefits and we're committed to helping you reach your potential by providing opportunities for professional growth across the state. JR 5200 Clinician Los Angeles, CA 90004 Salary: $33.09 - $40.19 per hour Pay Frequency: 24 Pay Periods Per Year Full Time Mon thru Fri 9:00am to 5:30pm Non-Exempt Driving Required Lower end of range will apply to candidates who meet minimum experience or have limited years of relevant experience. The higher end of range will apply to seasoned candidates with considerable years of relevant experience. PATH is seeking candidates passionate about helping others make a positive change in their lives to join our Interim Housing team as the Clinician at the Highland Gardens location. ABOUT PATH Since its foundation in 1984, PATH (People Assisting The Homeless) has pioneered bold and effective approaches to assist people experiencing homelessness. PATH operates services throughout California, connecting our clients to a comprehensive continuum of homelessness prevention, street outreach, employment preparation and placement assistance, individualized case management, supportive services, interim housing, and permanent supportive housing. ABOUT OUR TEAM We believe our mission to end homelessness can be achieved by providing permanent housing and highly individualized supportive services. Every program in our growing range of services is designed to holistically address barriers to long-term housing stability, implementing evidenced-based practices to promote improved wellbeing beyond housing alone. We are committed to improving the quality of our services by creating a diverse work environment for the community at large ABOUT THE JOB As part of the Interim Housing team, the Clinician provides clinical-level support to interdisciplinary teams, promoting mental wellness for clients through direct client assessment and intervention. This role offers clinical context and insight in team meetings and case conferencing, primarily focusing on crisis intervention, risk assessment, psychosocial rehabilitation, and transitional mental health services while connecting clients to care. The Clinician supports all clients in a program based on client needs, consent, and program policies and procedures. Depending on the program, the Clinician may also conduct biopsychosocial needs assessments and general mental health/substance use screenings and assessments. Position Responsibilities include: • Conduct biopsychosocial assessments as needed per the program's policies and procedures, • Use clinical training to provide crisis intervention and risk assessment to any program client in need., • Provide mental health training and consultation to program staff as needed., • Connect clients to appropriate levels of mental health and SUD treatment, and coordinate care with client's mental health and/or SUD provider., • Provide temporary mental health counseling until they can be connected to treatment., • Collaborate with the client's assigned case manager/clinical case manager and other team members., • Maintains documentation standards as required by the Program and PATH policies, including completing case file notes in a timely manner and maintains a complete, accurate, and current client file with all required documents., • Maintains confidentiality of client files per HIPAA and all applicable guidelines., • Analytical Skills and Attention to Detail: Gather and interpret data, identifying trends, patterns, and insights to inform decision-making. Ability to consistently produce high-quality work, ensuring accuracy and precision in all tasks., • Collaboration and Teamwork: Work effectively with others, seeking out and building positive working relationships with colleagues, participants, and stakeholders. Work effectively with others, contributing to team goals and recognizing the strengths and contributions of others., • Communication: Convey information clearly and effectively (both verbally and in writing) to individuals and groups in a manner that informs, engages and maintains their attention., • Creativity and Initiative: Take action and make decisions without being prompted, demonstrating a proactive approach to work and a willingness to take on additional responsibilities. Think outside the box, generating innovative solutions to problems or challenges., • Critical Thinking and Problem Solving: Analyze and evaluate information and situations, identify key issues, consider alternatives, and make logical decisions based on sound reasoning that will achieve the desired outcome., • Master's degree in social work or a closely related field, e.g. masters in psychology, etc., • Ability to obtain CPR/First Aid certification paid for by the Company., • Ability to work Flexible hours, which may include evenings or weekends., • Employment Eligibility Verification., • Perform all work in CA., • Successful completion of background screening (which may include an LAX clearance, Veterans Affairs Clearance, Sheriff Clearance, or another clearance for specific contracts) and drug test., • Have reliable transportation, • A valid driver's license, • Proof of insurance and ownership for personal vehicles used during work duties PATH is committed to maintaining the highest standards of professionalism and objectivity in our services and employment practices. To avoid potential conflicts of interest and ensure the integrity of our programs, we are unable to employ individuals who are currently receiving services from PATH or have received services within the past two years. CALIFORNIA-BASED WORK EXPECTATIONS We are a California employer. Therefore, all regular and customary work must be performed within the state. Approval for work outside of the office, does not establish approval for work to be conducted outside of California. PATH does not offer fully remote positions. While some roles may include a schedule that involves multiple designated worksites or approved off-site locations (e.g., hybrid schedules), this does not imply that work will be performed from home. Many positions are fully on-site with no off-site work. All work schedules are determined by the responsibilities of the role and operational requirements, and may be adjusted at any time. WHAT WE OFFER In addition to a rewarding work environment, we offer our employees a competitive benefits package that includes medical, dental and vision coverage, vacation and sick time, paid holidays, and a retirement plan. READY TO MAKE A DIFFERENCE THROUGH ACTION? If this position sounds like a fit, please submit your application today. A resume is required. PATH provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PATH complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. PATH will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. PATH is dedicated to racial and social justice by centering equity in our service delivery and maintaining a diverse and inclusive work environment for the communities we serve. We seek awareness and insight from witnessing the stories of our clients and learning from the experiences of our staff to ensure impactful systems change. If people are empowered, they can bring their authentic, whole selves to work and when people feel like they belong, they can become part of a unified effort of ending homelessness for all.

Job Description The Sr. Compliance Technician will perform routine and advanced inspections, testing, equipment certification. Along with maintenance tasks on various mechanical, electrical, and electronic equipment as directed by the dispatcher or manager. Assists with providing leadership and training to junior compliance staff through mentorship. Primary Responsibilities: • Adhere to Jones Covey Groups' safety policies and procedures, reporting any unsafe conditions., • Complete online and classroom training courses., • Maintain all certifications and all licenses, ensuring they are up to date and in good standing., • Ensure use of proper uniform and PPE gear, presenting a quality image and professional demeanor., • Ensure company vehicles and equipment are properly maintained., • Perform regular and advanced compliance testing and/or inspections at petroleum fueling locations., • Meet due dates noted in the work orders for the compliance work., • Complete all required local, state, or federal paperwork promptly and professionally., • Follow customer protocols and procedures including customer’s safety and housekeeping guidelines., • Maintain inventory levels to achieve an acceptable first-time fix rate., • Complete work orders within an ERP system and utilize electronic equipment to check in/out., • Job requires travel in and out of state 30% to 50% of schedule., • High school diploma or GED required., • Minimum two years’ experience with petroleum related equipment, preferred., • Strong computer skills including Microsoft Office products (Word, Outlook, Teams, etc.), • Appreciate the importance of safety and following strict safety and technical protocols., • High personal commitment to delivering quality service., • Troubleshooting skills/logical problem-solving skills, • Demonstrate leadership skills and provide guidance to junior technicians., • Self-motivate, self-start, manages time effectively, and meets critical deadlines., • Multi-task and is highly organized., • Strong written and verbal communication skills, • Work independently without constant direct supervision and function effectively as part of a team., • Properly use standard hand tools and job specific equipment, • Exhibit a professional demeanor, strong communication, and proficient customer relation skills with excellent follow-up practices., • Frequently kneel, bend, handle, reach, stand, and lift to 60 pounds unassisted/100 pounds assisted by other personnel while working safely in a high traffic area., • Work flexible hours, including some overnights, and willingness to travel as needed., • Possess/obtain certification in, but not limited to:, • A/B UST operator certification in each servicing state, • UST Inspection & Maintenance, PEI RP 900., • ICC certifications as appropriate for testing jurisdiction., • Testing UST Spill, Overfill, Leak Detection and Secondary Containment, RP 1200., • Veeder-Root ATG and/or equivalent, • Estabrook Line Leak equipment and/or equivalent, • Tank Testing equipment and/or equivalent, • Additional training including but not limited to Red Jacket, Franklin Fueling, OPW, and EMCO, • Physical Requirements: Ability to repetitively lift, carry, push, pull up to 50 pounds, frequent bending, stooping, standing 8-10 hours per day.

Job Description Under the supervision and direction of the Regional Engineer, the Lead Preventative Maintenance Technician is responsible for the proper operation and maintenance of the mechanical, electrical, plumbing, and fire/life safety systems and equipment at his/her assigned Region(s). Job Duties · Reports to the Regional Engineer, who will provide functional and operational guidance and job assignment as required. · Provides operational and functional guidance to maintenance and contractor personnel working on the property. · Operates, maintains and repairs all mechanical, plumbing and electrical systems and devices in the building. · Maintains operating manuals and technical data, and accurate written records of all maintenance services, preventive maintenance, equipment inventory, general supply and parts inventory, and pertinent data regarding operating equipment, building fixtures. · Monitor parts inventories for all maintenance items on a monthly basis and request the purchase of required supplies by the Regional Engineer or Portfolio Manager. · Performs preventive maintenance as assigned by the Regional Engineer. · Read and comprehend trade-related blueprints, line diagrams and schematics. · Performs minor painting, carpentry, locksmith and exterior site work as required and assigned. · Demonstrated competence in the field of building engineering. · Will stand a shift and work with the tools of the trade. · Manage the PM work order system to ensure excellent service. · Perform building inspections as assigned. Report and address any mechanical or operational deficiencies found during the inspection and submit written reports with corrective recommendations. · Trouble-shoot problem areas in the base building or tenant spaces. Consult with Regional Engineer, or Portfolio Manager regarding the labor requirements for any given job. · Evaluate specifications, blueprints, and line diagrams. · Understand and effect required mechanical operating standards for the building, including seasonal temperature adjustment criteria and procedures for heating and cooling, economization, on/mid/off peak operation, and automatic EMS settings to maximize energy savings. · Maintain logs in an accurate and current condition. Company DescriptionDouglas Emmett operates approximately 18 million square feet of Class A office space and over 5,000 luxury apartment units in nine highly desirable submarkets in Los Angeles County, six of which are located in Los Angeles' Westside - Brentwood, Century City, Santa Monica, Beverly Hills, the Olympic Corridor, and Westwood - and three submarkets in the San Fernando Valley - Sherman Oaks/Encino, Warner Center/Woodland Hills, and Burbank. The Company's Honolulu office portfolio is located in the downtown central business district with multifamily properties in nearby suburban communities. The Company utilizes the same focused business strategy that was implemented by its founding principals - managing, developing, redeveloping, and acquiring multifamily and commercial real estate in high barrier-to-entry submarkets that exhibit strong economic characteristics such as population and job growth, as well as inherent supply constraints, such as limited developable land due to natural and political barriers. The Company strives to capitalize on the experience of its seasoned management team to create continued value.Douglas Emmett operates approximately 18 million square feet of Class A office space and over 5,000 luxury apartment units in nine highly desirable submarkets in Los Angeles County, six of which are located in Los Angeles' Westside - Brentwood, Century City, Santa Monica, Beverly Hills, the Olympic Corridor, and Westwood - and three submarkets in the San Fernando Valley - Sherman Oaks/Encino, Warner Center/Woodland Hills, and Burbank. The Company's Honolulu office portfolio is located in the downtown central business district with multifamily properties in nearby suburban communities.\r\n\r\nThe Company utilizes the same focused business strategy that was implemented by its founding principals - managing, developing, redeveloping, and acquiring multifamily and commercial real estate in high barrier-to-entry submarkets that exhibit strong economic characteristics such as population and job growth, as well as inherent supply constraints, such as limited developable land due to natural and political barriers. The Company strives to capitalize on the experience of its seasoned management team to create continued value.

Job Description With over 30 years of experience, we are a leading, full-service, independent BAS contractor specializing in new construction and retrofit projects in the western United States. Our comprehensive services include BAS and integration solutions, system retrofits, preventative service, data analytics, and fault detection diagnostics. We excel in project management, ensuring on-time and on-budget delivery with a single point of contact for our customers. Our dedicated team leads the industry with innovative products and solutions that reduce energy and operational costs, creating smarter, more efficient buildings. Committed to excellence, we prioritize customer satisfaction and take pride in our work. This position requires applying technical knowledge and experience for successful database programming and custom graphics development, followed by installation into the Building Management System for all assigned projects. Additionally, this role supports the startup, commissioning, and troubleshooting of assigned projects. A high level of computer skills and an understanding of computer-operated systems, including network types, are essential. Documenting all fields as-built conditions and commissioning process documents is also required. The role necessitates close interaction with the Project Manager and any assigned Project Engineering staff to assist with the timely and successful completion of each project. ESSENTIAL FUNCTIONS: • Lead Systems Software Engineer in developing lower and mid-level control systems databases and programs., • Support the execution of initial systems point-to-point commissioning activities., • Troubleshoot local and wide area network issues as they arise., • Use computer hardware and software to support and/or execute pre-functional testing of system software code in relation to the design sequence of operations., • Participate in and support final systems functional testing relative to standard, 3rd party, LEED, and Title 24 testing as required., • Possess knowledge of multiple vendor software versions., • Develop and utilize skills to work effectively with 3rd party integrations of other vendor products, systems, and protocols., • Maintain a lead role in field coordination of installing subcontractors when a Project Engineer is not assigned to the project., • Attend required field project coordination and commissioning meetings as required by assigned projects., • Lead all end-user/customer system training requirements on assigned projects., • Ensure systematic turnover of the project from the construction phase to the Service team on all assigned projects., • Assist Design Engineers with validating sequence of operations development against design build and/or contract requirements., • Coordinate with project staff to ensure accurate and timely recording of project costs, including time sheets, daily reports, etc., • Manage field time and budgets relative to the fieldwork of assigned projects., • Provide necessary leadership for the field team when executing mid-sized projects requiring multiple team members., • Communicate effectively with other team members regarding project issues, obstacles, and information needs., • Attend and successfully complete OSHA 10 and OSHA 30 safety training classes., • Practice safe work habits and participate in office safety programs and any specific safety requirements of all assigned projects., • Proactivity/Initiative: Recognize and accomplish tasks with minimal supervision., • Perseverance: Overcome challenges and bounce back from adversity., • Insight: Gather and interpret information to suggest new possibilities., • Engagement: Communicate a persuasive vision and connect with people emotionally and logically., • Teamwork: Effectively work toward common goals by supporting and sharing information authentically., • Big Picture: Contribute to both short- and long-term business strategies., • Motivation/Dedication: Commit to excellence and collective goals with responsibility and humility., • Technical Curiosity/Willingness to Learn: Seek new experiences, knowledge, and feedback with an openness to learning and change., • Annual Salary: $90,000 to $110,000, determined by factors such as job-related skills, experience, certifications, education, and work location., • Medical, Dental, and Vision insurance., • 401(k) with company match., • Health and Wellness Programs., • Training and Development opportunities., • Educational Development support., • Career Growth Opportunities., • Employee Assistance Program (EAP)., • Paid Time Off (PTO)., • Company-observed paid holidays.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Retina Los Angeles Encino, Los Angeles, CA Job details Job Type Full-time Benefits Health insurance Dental insurance Vision insurance Life insurance Sick, Vacation and Holiday Pay 401(k) Full Job Description Overview How can we make your day? At Retina Los Angeles, our goal is to provide world-class eye care and exceptional customer service to our patients. We believe that teamwork is very important and that when we work together, we can achieve amazing things. We are looking for team players with a strong work ethic and positive attitude these attributes are more important to us than experience. We encourage and support an environment of teaching and growth for our staff. We invest in creating a positive work environment, where you might follow your career goals and grow, so that together we can take exceptional care of our patients. Responsibilities Located in sunny Los Angeles, our physicians are leaders in patient care, education, and research. We provide the highest quality eye care to a diverse group of patients, from premature infants to children to adults of all ages. Our physicians are Ophthalmologists (eye doctors) with subspecialty training in Retina. The Retina is the back part of the eye. Like the film of a camera, it is the final place where light (or an image) is processed before traveling to the vision center of the brain. We take care of patients with a wide array of vitreoretinal conditions, and we enjoy teaching our patients and our staff about the cause and treatment of these conditions, using the latest research and highest quality, cutting-edge diagnostic imaging equipment. You will contribute as an essential member of our team-first approach to collaborative medicine. You will benefit by learning in an environment where empathy and education are fostered and supported. We all work together to prevent health care errors and strongly emphasize patient safety and high-quality care. Team members are encouraged to communicate and to work together to support quality improvement. Our mission is to restore and protect our patients vision. We feel it is very rewarding to work on a team where we strive to prevent blindness and take care of others. Our Ophthalmic Technicians provide assistance to our Ophthalmologists by performing clinical and administrative tasks required to effectively handle the day-to-day function of our practice. This job performs Ophthalmic Technician duties, including and not limited to those described below. Principal Responsibilities: Welcomes patient and shows them to the workup room. Completes work-up of patient, including collecting chief complaint, medical history, medication list, and allergies. Performs testing of vision, checks pupils, and tests intraocular pressure with a Tonopen or Applanation Tonometry. Depending on experience and/or future training, may perform additional tests including, but not limited to: Optical Coherence Tomography (OCT), Heidelberg Retina Tomography (HRT), Fundus Autofluorescence (FAF), Fluorescein Angiography (FA), Indocyanine Green (ICG) Angiography, A- or B-scan ultrasonography, Ultrasound Biomicroscopy (UBM), or Visual Field testing. Assists Ophthalmologist with in-office procedures, as appropriate and based on level of experience and training. Administers eye medications as prescribed by the Ophthalmologist. Prepares trays for procedures, including intravitreal (intraocular) injections. Washes and cleans patients eyes after procedures. Cleans exam rooms after patient care. Conducts area sweeps before, during, and at the end of day to ensure that the patient care area is at the practices high standards. Closes rooms at the end of the day. A high level of professionalism and trustworthiness are expected. Performs all other duties as assigned, which may include assisting in other departments within Retina Los Angeles. At Retina Los Angeles, we currently offer the following benefits to the Medical Assistant position: Base Pay: $18.00 - $20.00 per hour commensurate with qualifications and experience Competitive starting wages Performance-based raises Training to grow within the practice Paid holidays, vacation, and sick time Medical, Dental, and Vision Insurance plans Employer paid life insurance 401(k) retirement program Tuition Assistance for career growth and development Employee Assistance Program (EAP) Our 3 most important service principles at Retina Los Angeles are: exceptional patient Care, Customer service, and Communication. Our Team-First Philosophy is: Restore. Lead. Advocate. Together, we can achieve amazing things. Candidates who are efficient, reliable, professional, detail oriented and organized, with the ability to communicate and work well with others are encouraged to apply. Prior experience in eye care is not required. A healthcare career track is a plus but not required. Ability to communicate in multiple languages is a plus but not required. COVID: Patients and staff have the option of wearing a mask in clinic. Staff are required to be vaccinated unless applying for an exemption. Employment offers are contingent upon a background check and preemployment drug screen. Schedule 8-hour shift Monday to Friday Overtime One location at this time. Travel to additional locations may be required in the future. Qualifications for Ophthalmic Technician position: Strong work ethic and the desire to take great care of and provide great customer service to patients is a must. Positive attitude and the capacity for empathy are desired. Strong interpersonal and communication skills, or the desire to attain these skills, is preferred. Ability to handle confidential matters and adhere to HIPAA guidelines. High School/GED preferred. The ability to communicate in multiple languages is a plus. Basic skills in operating a computer and office equipment is required. Strong organizational skills are preferred. Ability to make chart documentation with entry into electronic medical record is required. Just as Retina Los Angeles is dedicated to improving the quality of life of our patients and the health of our community, we are dedicated to your professional career development. With a great range of benefits that includes a comprehensive compensation and benefits package, and the opportunity to live and work in beautiful Southern California, we hope that you will find that a career with us is a rewarding and fulfilling opportunity. Retina Los Angeles is an equal opportunity/affirmative action employer.

Job DescriptionSalary: $21 - $23 / hour FOOD SERVICES TECHNICIAN INDUSTRIAL SETTING (SUBSTANCE USE DISORDER TREATMENT FACILITY) BASIC FUNCTIONS • The basic functions of the Food Services Technician are preparing meals and snacks, ensuring a high level of daily nutrition, and participating in the planning and preparation of food for all facility fundraisers and special events. RESPONSIBILITIES * Train, direct and supervise client crews in proper procedure for performance of their jobs. * Prepare well-balanced and ethnically diverse meals. * Maintain cleanliness standards in all kitchen and food storage areas. * Ensure strict adherence to all health code regulations. * Inventory and rotate food to ensure freshness. * Adhere to posted menu. (Any menu changes must be approved by supervisor). * Prepare meals for clients with special medical and / or nutritional needs. * Assist with meal ticket sales. * Report kitchen equipment maintenance issues to Supervisor immediately. * Assist Supervisor in ensuring prompt payment of invoices. • Perform other related duties as assigned by Food Services Manager and / or the Food Services Assistant Manager. SKILLS / KNOWLEDGE • Knowledge of health and nutrition, • Cooking and baking, • Inventory control, • Menu planning, • Cost effectiveness, • Time management, • Communication skills EDUCATION / TRAINING * Must have High School diploma or equivalent. EXPERIENCE • Must have at least six months experience in culinary field. WORKING CONDITIONS • Must be able to use hands and fingers in grasping, pinching, chopping, pulling, and lifting associated with preparing and cooking foods using knives, utensils, and cookware for durations of 6 - 8 hours., • Must be able to remain in a standing position for 6 - 8 hours., • Occasional crouching below the waist and / or above the shoulders., • Occasional lifting and / or moving of objects up to 75 pounds., • Occasional pushing and / or pulling of objects up to 75 pounds., • Occasional work may be performed at various locations across Los Angeles County. SPECIAL CONDITIONS • Must be willing to undergo random drug screenings. POSITION REPORTS TO * Food Services Manager Job Type: Full-time Pay: $21 - $23 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible schedule, • Flexible spending account, • 80 - 100% Employer Paid Health insurance, • Life insurance, • Paid time off, • Professional development assistance, • Tuition reimbursement, • Vision insurance

Job DescriptionJob description Sorting Robotics Inc. is on the lookout for a Robotics Technician to join our growing team. In this role, you will work closely with engineers to build, test, and maintain robotic systems used in the cannabis industry. Preferred: Must be comfortable with cannabis (preferred you enjoy it and have experienced it) as we manufacture robotic innovations for the legal cannabis market in the US and Canada. RESPONSIBILITIES • Assembling robotic systems and components according to engineering specifications., • Conducting tests on robotic systems for performance and safety standards., • Diagnosing and troubleshooting any mechanical, electrical, or programming issues that arise., • Maintaining detailed records of tests, repair work, and system performance., • Collaborating with team members to improve and innovate robotics processes., • Participating in product development and prototyping as needed. You can view our website at Requirements QUALIFICATIONS • Hands-on experience with robotic systems, automation, or machinery., • Strong troubleshooting and diagnostic skills with mechanical and electronic systems., • Ability to read and interpret technical documents, schematics, and blueprints., • Fabrication skills with ideally some machining skills, • Excellent communication and teamwork skills., • Attention to detail and commitment to high-quality work., • Proof of COVID-19 vaccination Work Location: On-site Work Hours: 8-hour shifts with occasional overtime Applicants for this position must be legally authorized to work in the United States and have proof of COVID-19 vaccination records. Benefits Salary: $75-90k + 0.15% Equity + Full Benefits + Perks Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Parental leave, • Vision insurance

Job DescriptionBenefits: • Paid Holidays, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Note: Construction Schedulers with less experience may be needed in the near future. Candidates are welcome to contact Pacific Pros for consideration for the upcoming opportunities. Work Location: LAWA has required the candidates be local for this position. Region: Los Angeles, CA Status: Full-time on-site. Opening: Winter 2024, Immediate Position Description Summary Participate as integral member of an owners program and project controls team, being directly responsible for scheduling multiple, interdependent projects of a large scale ($100m+ in value). Work collaboratively with other elements of the owners team, including project managers, construction managers, other controls discipline leads, and claims staff to monitor, report on, and negotiate issues on assigned projects. Review designer and contractor submitted schedules and perform analysis as needed. Provide owner with objective assessments of schedule delays (using Time Impact Analysis or other means), present summary and detailed findings to owner and/or third parties as needed. Engage in direct discussions with contractor, as needed, to understand basis of delay claims and support owners understanding of potential liabilities for the negotiation of appropriate settlements. Essential Job Duties for this position The duties for this position include, but are not limited to, the following: • Review Contractors Baseline Construction Schedule for conformance with the Plans and Specification to ensuring proper WBS breakdown, sequencing, critical path and logic ties, and inclusion of all activities, resource loading, etc. necessary for approval., • Perform and coordinate constructability review on Contractors Baseline Schedule submittal and identify any missing activities, float sequestering or suppression techniques/issues or any other conflicts or shortcomings., • Ensure that project WBS are properly coded and resource loaded., • Provide written evaluation, comments and responses on Baseline Schedule submittal., • Review Contractors Monthly Schedule updates in conformance with the plans and specification and identifying any logic changes or inaccurate progress reporting, critical path changes or other pertinent items necessary., • Identify variations from the plan and analyses and report on the cause of the variations., • Review construction progress and inspection reports and maintain an accurate as built schedule for use during construction and for evaluation of Contractors Monthly Schedule updates and any Time Impact Analysis (TIA) submittal., • Attend weekly construction meeting and monitor 3 Week Look Ahead Schedules for accuracy and identify any inconsistency with Baseline/Schedule updates. Promptly reporting schedule slippage, other unsatisfactory performance or other variances., • Identify any critical path changes or near critical path changes that could impact individual phase, milestones or project duration., • Provide written response and approval recommendation submittal response., • Coordinate schedule comments and corrections with Contractors., • Schedule deficiencies., • Maintain a Owner shadow Schedule identifying actual construction activities dates from various sources including daily inspection and quality control reports, site visits, etc. Project and identify potential delays or schedule adjustments based upon Owner Schedule and utilize to assist in evaluating the Contractors Monthly Schedule updates., • Review Time Impact Analysis (TIA) submitted by the Contractor and provide written responses, evaluation and recommendation for time extension as appropriate. Identify schedule variances and opportunities and proactively develop mitigation strategies for the Project Management team., • Provide LAWA What if schedule impacts for contemplated additional work, potential re-sequencing of phases or construction activities. Evaluate, and forecast project status against an established baseline schedule. Assess the impact of project milestones and report status to Management in order to mitigate project overruns and schedule slippage., • Provides direct scheduling related support on multiple projects on reporting to multiple Project Managers., • May require monthly support for projects in Planning or Design along with supporting Construction projects within a Master Program Schedule Plan and would report to the Airside Element Management Team., • May be required to maintain master schedule system to track project interfaces for time frame impacts to electrical airfield systems, mechanical systems, airfield operations and other aviation related disciplines and projects., • Provides development and analysis of man-hour resources, equipment resources and cost loaded, time-phased schedules., • Prepare detailed plans; time scaled charts, diagrams and tracking various quantities to measure construction performance., • Maintain simplified logic schedules to highlight status of key interfaces for critical path review., • Provide progress reporting documents and briefing materials as required. Develop creative reporting tools to communicate complex project sequencing and/or progress assessments., • Participate and review with third-party schedulers to address and provide written comments., • Analyze and assess project milestones and reports the fiscal impact and risk to Management., • Contribute to the advancement of PDGs goals through commitment to productive collaboration with all stakeholders and in development of planning and design schedules., • Support overlapping project scheduling tasks, issue management, meeting facilitation, document control and monthly status reporting to the Project Management Team.Hardware/Software Knowledge, • Mastery of Oracle Primavera P6 Version 8.3 or higher., • Experience with Microsoft Office Suite software Word, Excel, PowerPoint, and Outlook., • Knowledge of Prolog and other Project Management Systems is preferred., • Experience with Adobe Acrobat., • Knowledgeable of presenting graphical data as related to scheduling., • Use of other related software tools such as Schedule Analyzer, MS Project, Claim Digger, etc.Required Qualifications, • US Employment Authorization without needing sponsorship, • See Education/Training requirements, • Excellent written and oral communication skills, • A valid Drivers License and compliance with PACIFICs Vehicle Policy, • Proficiency with common Microsoft Office Applications (Word, Excel, PowerPoint and Outlook), SharePoint and Adobe Acrobat (PDF files), • 3+ References from Clients, • 10 years or more of scheduling experience with 5+ years in direct support of an active construction project, • Demonstrated experience scheduling the design and construction of large-scale, complex projects including developing and managing a progress reporting methodology for multi-million-dollar construction projects within the range of $30M $150M., • Requires knowledge and experience of Project Management principles and Project Control Cycles., • Must be capable of reporting earned value performance measurement techniques., • Understanding of critical path method (CPM) scheduling techniques and principles, including ability to handle and prioritize multiple projects concurrently., • Must be able to track field progress weekly in reporting Contractors performance., • Developed reporting tools to communicate complex project sequencing and/or progress assessments., • Worked in a master schedule/sub project system environment including programs in determining progress impacts., • Must possess capability to report on all levels of project schedules, quality, monitor project progress, risk and ensure project milestones are met., • Demonstrated experience in working and reviewing third-party design and/or construction schedules and addressing comments., • Must clearly and concisely be capable of presenting project trends, risks and forecast performance reports to management and to make recommendations on strategies and mitigation measures to resolve project issues is required., • Demonstrated experience in progress reporting documents and ability to understand a demanding, technical and complicated construction program plus the ability to communicate progress and issues both verbally and written communications on technical and non-technical matters for various levels of management., • Demonstrated success on the job, as evidenced by satisfactory performance, acceptance of responsibility, and growth in previous position(s)., • Must possess the ability to effectively interact with various departments to maintain open lines of communication., • Proven accuracy, reliability and completeness in job accomplishment., • Self-starter with results-driven focus and ability to work with others.Education/Training, • A Bachelors degree in Engineering, Construction Management or related field is preferred.Registration/Certification, • Planning and Scheduling Professional (PSP) certification is preferred.Element-Specific Requirements/Notes, • Aviation experience preferred., • May assume other duties as required/needed, • Maybe required to work past regular work shift, • Maybe required to work various shifts as needed, • This position offers a hybrid/telework schedule per LAWAs current Pilot Telework Policy for details; however, LAWA has required the candidates be local for this position.

Job Description North Hollywood Auto Repair in North Hollywood, CA is seeking a skilled and experienced Auto Technician to join our esteemed team full-time. We are a family-owned shop with a strong presence in the North Hollywood community, established for over 87 years. This role offers an attractive compensation package and a suite of benefits designed to support your career growth and work-life balance. Compensation: $80,000 - $120,000 per year (commensurate with experience) Benefits: • 401(k), • Health insurance, • Paid training, • Paid ASE recertification, • Paid holiday and paid vacations, • Employee discounts, • No weekend or night work ABOUT OUR SHOP North Hollywood Auto Repair has been a pillar in our community since 1937. As a family-owned and operated shop, we pride ourselves on our commitment to excellence and personalized service. Our loyal customer base depends on us for high-quality auto repairs and honest, transparent communication. We strive to maintain a friendly, positive work environment where our team can thrive and grow. With a 5-star Google rating and 4.5 on Yelp, our reputation speaks for itself! We hope you'll join our talented and dedicated team of professionals! A DAY IN THE LIFE OF AN EXPERIENCED AUTO TECHNICIAN As an Experienced Auto Technician, you will begin your day by reviewing the schedule and prioritizing your tasks. Your responsibilities include performing routine maintenance such as oil changes and tire rotations, diagnosing and repairing electrical and mechanical issues, and utilizing advanced diagnostic tools to assess vehicle performance. You will also maintain an organized work area and provide customers with accurate estimates and service recommendations. QUALIFICATIONS Non-negotiables: • 5+ years of hands-on experience as an automotive technician, • In-depth knowledge of automotive systems (including engines, transmissions, and fuel systems), • Proficiency with diagnostic tools and equipment for vehicle issue identification, • Skilled in performing precise automotive diagnostics and repairs, • Strong problem-solving abilities and attention to detail, • Ability to thrive in a fast-paced environment while ensuring high-quality work, • Physical capability for heavy lifting and extended periods of standing WE WANT TO HEAR FROM YOU If you are ready to advance your career and join our respected team, please complete our brief 3-minute, mobile-friendly initial application. We look forward to discussing your qualifications and next steps with you! Job Posted by ApplicantPro

Job DescriptionReports To: Mitigation Manager What does a Mitigation Technician with Paul Davis do? • Serve others within your community in their time of need, • Make a difference for others that have had a disaster strike their property, • Work hard and take pride in completing projects (i.e. mitigating flood and fire damage) Team Compensation and Benefits: • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Health, dental and vision insurance, • Bonus program for performance, • Referral program, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Fluent in English, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Ability to lift 75 LBS frequently, • High level performance of water mitigation, tarping, board up, mold remediation, asbestos/lead abatement and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule., • Assist in warehousing and facility related tasks when necessary.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Conservation Technician, Textiles (Regular, Part-Time) Conservation Center Reporting to the Senior Conservator, Textiles the Conservation Technician, Textiles assists Textile Conservators with various tasks related to exhibition, preventive conservation, and mounting of LACMA’s permanent collection of textiles, costumes, upholstered furniture, and modern and contemporary fiber artworks. The Conservation Technician is brought in as needed, to take on available projects. Responsibilities: * Prepares condition reports and additional documentation. * Assists with the installation and deinstallation of flat and three-dimensional textiles and costumes. * Assists with rehousing textiles for transportation and storage. * Performs minor treatments, stabilization of textiles, costumes, and related works of art in the museum’s permanent collection requested for exhibition and loan, under close supervision of the textile conservators. * Assists with designing and fabricating mounts and supports for in-house and touring exhibitions, and outgoing loans. * Works collaboratively with other conservators, museum staff, and external experts to coordinate conservation efforts and address specific project needs. * Monitors and maintains exhibition gallery spaces including microclimates, dusting and /or micro-vacuuming of exposed textiles, costumes and their display platforms, and responding to incident reports. * Assists with integrated pest management (IPM) and pest abatement of artworks with anoxia or freezing as needed. * The Conservation Technician may assist conservators at off-site storage to perform condition reports and conduct remedial conservation treatments. * The Conservation Technician may act as a courier for art, domestically and internationally, overseeing the handling in transport and installation. Benefits * The expected hourly rate for this Los Angeles, CA based position is $35.00, subject to change. Qualifications * Graduation from an accredited fine art curriculum * Minimum 2 years of experience in either a fine art museum or an equivalent combination of training and experience * Hand and machine sewing, dyeing with synthetic and natural dyes, fabric painting, patternmaking and needlework * Background in art handling/preparation - textiles, fashion, studio arts * Experience handling fine art and knowledge of current conservation and preservation standards, practices, and ethics is preferred. * Ability to work independently and maintain effective relationships with other departmental staff and the public. * Must be able to lift at least 20-40 lbs., and stand for long periods when working on large artworks. * Basic computer skills (e.g. word processing) and ability to work with collection management software (e.g. TMS) * Ability to drive and access to a motor vehicle

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types, • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope, • Reviews Contractors Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments, • Performs QA/QC on contractor schedule submittals for conformance with the contract; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones, • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements, • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit, • Performs Critical Path analysis and Earned Value analysis, • Walks the construction sites as needed and checks the contractors weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicate with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings, • Performs Program Schedule QA/QC reviews on a regular basis, • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis, • Ensures proper use of Program-level standard codes, layouts and reports necessary to ensure data integrity, • Serves as a liaison between project teams, department leadership and the Program & Project Controls department, • Minimum 5 years full-time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects, • Proficiency in Primavera Latest Version and MS Office SuiteRequired Education:, • Graduation from a recognized college or university with a bachelors degree in any course, but with additional two (2) years of experience in Construction Scheduling to compensate for the required education.Preferred Education:, • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Understanding of theories, principles and practices of cost engineering, scheduling and schedule forensics

Job DescriptionUnited Medical Imaging We are a large Imaging group, with 30 locations in Southern California, proud leading providers of quality healthcare to the community. Our centers are equipped to treat diagnostics, traumatic, and life-threatening injuries with caring and innovative team of healthcare professionals dedicated to enthusiastically improving the health and quality of life of the people we serve. We are seeking an Ultrasound Technologist in the Long Beach area who will be conducting ultrasound examinations which include operation of real-time and portable equipment as well as multiple imaging modalities, under the administrative direction of the Site Manager and the clinical direction of the Medical Director and Radiologist. Experience in use of Doppler and post-Doppler preferred. Additional tasks associated with keeping the radiology department running may perform ultrasound examinations which include operation of real-time and portable equipment as well as multiple imaging modalities, under the administrative direction of the Site Manager and the clinical direction of the Medical Director and Radiologist. Required Experience/ Education: Satisfactory and formal completion of an accredited, certified AMA school of Ultrasonography. SPI Certification is required, ARDMS Certification is a plus. Successful completion of Registry of Diagnostic Medical Sonographers is preferred. Experience in the use of Doppler and pulse Doppler preferred. Must have current CPR and Venipuncture license. Demonstrate competency in the use of all applicable aspects of the CIS, RIS, and PACS. Certified in Basic Cardiac Life Support. Good understanding of providing superior patient care; comfort, safety and confidentiality. Strong verbal and written communication skills. Ability to interact effectively with doctors, patients, peers The ideal candidate will have: Strong verbal and written communication skills. Good understanding of providing superior patient care; comfort, safety and confidentiality. Ability to interact effectively with doctors, patients, peers and management. Minimum of three years of clinical Ultrasound experience is required. Ideal Candidate lives close to or in Long Beach, no more than 10 miles.

Job Description WHY WORK FOR US? We are mission and values driven and your contributions will make a difference. We make a positive difference in people's lives and help an average of 23 people per week to find a place to live. If you join us, you will be able to advocate for change while also working with influential people who effect changes in policy and devote time to issues of racial and social justice. We prioritize your work/life balance and provide various scheduling options in addition to generous time off, health, and wellness benefits and we're committed to helping you reach your potential by providing opportunities for professional growth across the state. JR 5227 Case Manager Los Angeles, CA 90004 Salary: $23.24 to $28.28 per hour Pay Frequency: 24 Pay Periods Per Year Full Time Mon thru Fri 8:30am to 5:00pm Non-Exempt Driving Required Lower end of range will apply to candidates who meet minimum experience or have limited years of relevant experience. The higher end of range will apply to seasoned candidates with considerable years of relevant experience. PATH is seeking candidates passionate about helping others make a positive change in their lives to join our Interim Housing team as the Case Manager at the Highland Gardens location. ABOUT PATH Since its foundation in 1984, PATH (People Assisting The Homeless) has pioneered bold and effective approaches to assist people experiencing homelessness. PATH operates services throughout California, connecting our clients to a comprehensive continuum of homelessness prevention, street outreach, employment preparation and placement assistance, individualized case management, supportive services, interim housing, and permanent supportive housing. ABOUT OUR TEAM We believe our mission to end homelessness can be achieved by providing permanent housing and highly individualized supportive services. Every program in our growing range of services is designed to holistically address barriers to long-term housing stability, implementing evidenced-based practices to promote improved wellbeing beyond housing alone. We are committed to improving the quality of our services by creating a diverse work environment for the community at large. ABOUT THE JOB As part of the Interim Housing team, the Case Manager role's main function is to assist clients in breaking the cycle of homelessness by utilizing a "whatever it takes" approach. This position supports clients through all phases of homelessness, including but not limited to: on the street, interim housing, transitional housing, and permanent housing. The Case Manager assists clients with accessing and maintaining necessary services among health care, social services, interpersonal support systems, and navigation through a coordinated entry system. This position will provide individualized supportive services by helping each client develop a plan to address strengths, barriers, support health needs, increase income, and find and maintain housing. Position Responsibilities include: • Conducts intake and individualized needs assessment for all clients and collaborates to develop Individualized Service Plan (ISP) that addresses housing goals, maintaining/increasing income and other personal goals identified by the client including medical, mental health, substance use, financial resources, vocational, and social support needs, • Provides referrals, linkages, information, and support to resources that help clients to achieve their ISP goals, • Completes program specific assessments (e.g. VI-SPDAT), • Evaluates strengths and challenges to addressing short term and long-term goals, conducts a 90-day review with the client after initial intake, • Maintains documentation standards as required by the Program and PATH policies, including completing case file notes in a timely manner and maintains a complete, accurate, and current client file with all required documents, • Maintains confidentiality of client files per HIPAA and all applicable guidelines, • Develops therapeutic and/or professional relationships with clients and systems/partners that enhance efforts to engage and retain individuals with their housing goals, • Provides crisis intervention and risk assessment services focused on increasing safety and enhancing the clients' ability to independently solve problems, utilize effective coping skills, and manage and self -coordinate own care, including services for individuals with chronic trauma, • Uses motivational interviewing and trauma informed care in service delivery, • Analytical Skills and Attention to Detail: Gather and interpret data, identifying trends, patterns, and insights to inform decision-making. Ability to consistently produce high-quality work, ensuring accuracy and precision in all tasks., • Collaboration and Teamwork: Work effectively with others, seeking out and building positive working relationships with colleagues, participants, and stakeholders. Work effectively with others, contributing to team goals and recognizing the strengths and contributions of others., • Communication: Convey information clearly and effectively (both verbally and in writing) to individuals and groups in a manner that informs, engages and maintains their attention., • Creativity and Initiative: Take action and make decisions without being prompted, demonstrating a proactive approach to work and a willingness to take on additional responsibilities. Think outside the box, generating innovative solutions to problems or challenges., • Critical Thinking and Problem Solving: Analyze and evaluate information and situations, identify key issues, consider alternatives, and make logical decisions based on sound reasoning that will achieve the desired outcome., • Ability to obtain CPR/First Aid certification through PATH., • Ability to work Flexible hours which may include evenings or weekends., • Employment Eligibility Verification., • Perform all work in CA., • Successful completion of background screening and drug test., • Updated Tuberculosis Test., • Driving is an essential function of this position. To meet the requirements of for this position, the incumbent:, • Must be able to qualify for Path Insurance coverage., • Must hold a valid CA Driver's License., • Must possess their own vehicle and provide proof of ownership., • Must provide proof of insurance coverage. EMPLOYMENT ELIGIBILITY Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa. PATH is committed to maintaining the highest standards of professionalism and objectivity in our services and employment practices. To avoid potential conflicts of interest and ensure the integrity of our programs, we are unable to employ individuals who are currently receiving services from PATH or have received services within the past two years. CALIFORNIA-BASED WORK EXPECTATIONS We are a California employer. Therefore, all regular and customary work must be performed within the state. Approval for work outside of the office, does not establish approval for work to be conducted outside of California. PATH does not offer fully remote positions. While some roles may include a schedule that involves multiple designated worksites or approved off-site locations (e.g., hybrid schedules), this does not imply that work will be performed from home. Many positions are fully on-site with no off-site work. All work schedules are determined by the responsibilities of the role and operational requirements, and may be adjusted at any time. WHAT WE OFFER In addition to a rewarding work environment, we offer our employees a competitive benefits package that includes medical, dental and vision coverage, vacation and sick time, paid holidays, and a retirement plan. READY TO MAKE A DIFFERENCE THROUGH ACTION? If this position sounds like a fit, please submit your application today. A resume is required. PATH provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, PATH complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. PATH will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. PATH is dedicated to racial and social justice by centering equity in our service delivery and maintaining a diverse and inclusive work environment for the communities we serve. We seek awareness and insight from witnessing the stories of our clients and learning from the experiences of our staff to ensure impactful systems change. If people are empowered, they can bring their authentic, whole selves to work and when people feel like they belong, they can become part of a unified effort of ending homelessness for all.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Parental leave, • Training & development, • Vision insurance We are currently looking for an experienced, well-qualified Auto Technician who would enjoy a fast-paced and high car-count business with unlimited earning potential. Must have full knowledge working on all makes and models of vehicles with the ability to perform complete inspections, diagnose and troubleshoot vehicles. ASE certifications are a plus and must have several years of experience in automotive field in the following areas: brakes, alignments, steering, suspension, heating / cooling systems, engine light diagnostics, engine performance air conditioning with bumper to bumper service. Must supply own tools, be self-motivated and have a valid driver's license with a good record. Benefits offered, including PTO and Medical/Dental/Vision. Uniforms provided. We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, age, sex, religion or national origin. We are committed to building a culturally diverse faculty.

Job Description Clear Construction is seeking a highly motivated and detail-oriented Sales Lead / Estimator to join our team. The Sales Lead / Estimator will play a crucial role in identifying and securing construction projects, as well as accurately estimating project costs. This position requires a combination of sales skills, construction knowledge, and financial acumen to ensure the success of our construction projects. This is a hybrid position and can be based in a home office Santa Barbara, Ventura or LA counties. Essential Duties and Responsibilities Sales • Identify and cultivate new business opportunities through networking, cold calling, inbound leads, and prospecting., • Build and maintain strong relationships with potential and existing clients to understand their needs and preferences., • Present Clear Construction's services and value proposition to clients effectively., • Prepare and deliver compelling sales proposals and presentations to prospective clients., • Negotiate contracts and agreements with clients to ensure mutually beneficial terms Estimating • Conduct site visits and assessments to gather necessary information for accurate project cost estimates., • Collaborate with project managers, architects, designers, and subcontractors to obtain input and pricing for project estimates., • Utilize industry-specific software and tools to generate detailed project cost estimates, including materials, labor, equipment, and overhead costs. Experience in SAGE Estimating 20.1 preferred., • Prepare and submit competitive and accurate bid proposals to potential clients., • Continuously update and refine cost databases to ensure up-to-date pricing information., • Complete any other job-related duties as assigned . Target Chargeable Rate 0% Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. MINIMUM EDUCATION, LICENSURE, OR CERTIFICATION REQUIRED • Bachelor's degree. Preferably in construction management, engineering, business, or a related field., • Valid Driver’s License, • A clean criminal background check required for employment MINIMUM EXPERIENCE REQUIRED • Three years’ experience in construction sales and estimating, preferably in high-end residential construction., • Previous experience working as a Construction Project Manager or Superintendent in high-end residential., • In-depth understanding of the local construction landscape. OTHER SKILLS • Strong knowledge of construction processes, materials, and techniques., • Proficiency in construction estimation software and Microsoft Office Suite. Experience in Procore preferred., • Exceptional communication, negotiation, and presentation skills., • Detail-oriented with the ability to work independently and as part of a team., • Strong organizational and time management skills., • Ability to handle multiple projects and deadlines simultaneously., • Experience using Bluebeam Revu Travel Time Required 15% (this is an estimated amount) ABOUT US Clear Construction’s mission is to simplify the complexity of construction through thoughtful, personalized collaboration. Our vertically integrated approach values attention to detail and sophistication unmatched by competitors. We are a team of hardworking and communicative professionals who take pride in understanding our clients’ desires and making them a reality—trust is just one of the things we build well. Core Values Must be able to exhibit and continuously demonstrate our Company's core values in any situation. Passion - Care for our clients, our work, and our company. Brilliance - Be bright, be positive, be exceptional. Precision - Absolutely no detail is too small or unimportant. Persistence - The greater the pressure, the brighter the diamond. Benefits • Insurance (Medical, Dental, Vision, Life), • 401(k), • Paid time off and sick pay, • Mileage, tool, cell phone reimbursement, • Referral program, • Competitive pay with yearly reviews, • Opportunity for Growth, • Tuition Reimbursement Typical Working Conditions Work performed in a combination of an office and rare field environment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and the risk of electrical shock. The noise level in the work environment is usually low to moderate. In some instances, this job may require work in areas where ear, eye, and hard hats for protection are necessary. Essential Physical Tasks While performing the duties of this job, the employee is frequently required to walk, stand, sit, bend, use hands to finger, handle, or feel objects, tools, or controls, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, drive, talk and hear. The employee must regularly lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception. Statement of Employer's Rights This job description does not list all of the duties of this position. You may be asked by management to perform other duties. You will be evaluated in part based on your performance of the tasks listed in this job description. Clear Construction has the right to revise this job description at any time. This job description is not a contract for employment, and either you or the Company may terminate employment at any time, for any reason.

Job DescriptionPacific Pros is seeking Construction Inspector for Construction Projects to be a representative for Los Angeles World Airport (LAWA). Work Location: LAWA has required the candidates be local for this position. Region: Los Angeles, CA Status: Full-time on-site. Opening: Summer 2025, Immediate Working Hours: TBD, typical dayshift is 6:00am – 2:30pm or 5:00am – 1:30pm M-F; night shift is 10:00pm – 6:30am Sun Position Description Summary Serve as Owner's representative. The Electrical / IT Inspector will support LAWA’s Quality Assurance & Construction Inspection Division across multiple projects within LAWA’s Capital Improvement Program. *Candidates must possess a current ICC certification as Commercial Electrical Inspector to apply.Successfully hired candidates must have LAWA SIDA badge prior to official start.*Must be able to work any assigned shift - day, swing, or night - as required to meet the contractor’s construction schedule. Description of Duties for this position The duties for this position include, but are not limited to, the following: • Electrical/IT inspection staff shall have a thorough knowledge of the methods, materials and techniques of the electrical/IT trade;, • the ability to diagnose violations and hazards in new and existing electrical/IT installations and take a proactive approach during construction;, • have a general understanding of low voltage systems including fire/life safety and information technology;, • have the ability to read and interpret contract documents, electrical codes, applicable standards., • Electrical/IT Inspectors must have the ability to set priorities, the ability to make decisions and work effectively with minimal supervision,, • the ability to deal tactfully and effectively with LAWA stakeholders, contractors, construction workers, the public and must conduct themselves in a professional manner at all times. Professional Experience Level/Minimum Qualifications • Electrical/IT inspection staff shall have 3 years or more experience performing electrical/IT inspections for Building Construction., • Current ICC Certification as a Commercial Electrical Inspector, • Proof of NFPA 70E standards training within the last 3 years, • Proof of Cal-OSHA 30 hr. training within the last 4 years, • Training & knowledge of NFPA -70, 70E, & 72., • Fall protection and harness training.Preferred Qualifications and Experience, • Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings., • Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects., • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials., • Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards., • Must be open to learning the prescriptive items required by the agency., • A strong understanding of diverse code requirements., • Excellent communication and time management skills.Essential Job Duties, • Conduct comprehensive daily inspections of electrical and IT systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Verify contractor compliance with local and national electrical codes (e.g., NEC, NFPA 70, 70E, 72) and LAWA-specific standards., • Track and document time-and-material work, field changes, and job quantities, • Assist in validating contractor progress payment requests based on an approved schedule of values., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed.Perform inspections of electrical installations including, but not limited to:, • Underground utilities and duct banks, • High-voltage switchgear and electrical panels, • Conduit racks, conductors, and grounding systems, • Interior and exterior lighting systems, • Fire life safety systems including smoke/heat detectors and FM-200 suppression systems, • Electrical shutdowns, lockout/tagout procedures, and breaker coordinationInspect IT infrastructure installations such as:, • Low-voltage systems (voice/data, security, access control), • Door card readers, security cameras, and public address (P.A.) systems, • Communication cabling and equipment roomsHardware/Software Knowledge, • Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Excel, Word, PM Web, Adobe Pro, Bluebeam, etc.)., • Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision.Required Qualifications, • Electrical/IT inspection staff shall have at 3 years or more of experience performing electrical/IT inspections; For task on the Airfield, 3 years or more of experience with airfield lighting is required., • Proven expertise in the installation and inspection of sewer and storm drainsystems, utility infrastructure, and traffic control measures., • Strong working knowledge of City of Los Angeles and County of Los AngelesStandards., • Ability to work effectively in a team-oriented environment., • Requires a detail-oriented professional with extensive field experience and a strong commitment to safety and compliance., • US Employment Authorization without needing sponsorship, • See Education/Training requirements, • Excellent written and oral communication skills, • A valid Driver’s License and compliance with PACIFIC’s Vehicle Policy, • Proficiency with common Microsoft Office Applications (Word, Excel, PowerPoint and Outlook), SharePoint and Adobe Acrobat (PDF files), • 3+ References from ClientsMinimum Education/Training, • High school diploma (or equivalent), • Higher education level is preferred., • For task on the Airfield, 3 years or more of experience with airfield lighting is required.Registration/Certification, • OSHA 30 (prior to assignment); valid certificates obtained within the past 4 years is acceptable., • Current ICC Certification as a Commercial Electrical Inspector;, • Proof of NFPE-70E standards. Completion of training must have been achieved within the last 3 yearsElement-Specific Requirements/Notes, • May assume other duties as required/needed., • May be required to work various shifts, including day, swing, and night., • Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules., • Availability to work overtime as required to meet project deadlines and ensure timely completion of tasks is preferred., • LAWA has required the candidates be local and available fully on-site for this field position.Compensation, • Prevailing Wage Position

Job Description Welding business searching for Ornamental fabricator welder with experience in welding and fabricating fences, gates, doors, handrails, etc. Minimum 5 years experience. No contractors or subcontractors. Only laborers. Pay is commensurate with experience and work quality. Call to schedule an interview PLEASE CALL 818-849-1026 Negocio de soldadura busca un FABRICADOR con experiencia en soldadura ornamental, y fabricador portones, pasa manos, puertas, etc. Mínimo 5 años de experiencia. Pago es basado es su experiencia y calidad de trabajo. No contratistas, se busca trabajador. LLAME AL 818-849-1026 Tipo de puesto: Tiempo completo Sueldo: $18.00 - $20.00 la hora Consideraciones ante el COVID-19: please wear mask. por favor use mascara. Tipo de puesto: Tiempo completo Sueldo: A partir de $15.00 la hora Consideraciones ante el COVID-19: Please wear a mask. Por favor de usar mascara.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle, and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! CNC Lathe Operator Department: CNC Lathe Position Summary: The candidate will be responsible for operating the CNC Lathe, and monitor quality of parts produced. Daily tasks: Run two CNC lathes to produce aerospace fasteners meeting quality and production targets. Check bolts using precision measuring tools and gages. Record daily production into SPC and shop floor control systems. Minimum Qualifications: • Strong mechanical aptitude and problem-solving skills, • Ability to read blueprints, • Do first Article Inspection, • Lifting up to 40 lbs. and moving 40 lbs. pans with dollies. Director of Manufacturing and Plant Manager Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; reach with hands and arms; stoop, kneel, or crouch; bend or twist their body. The employee must frequently lift and/or move up to 40 pounds. The employee is frequently required to repeat the same motion by using their hands to handle, control, or feel objects, tools, or controls and use their foot to press a foot peddle. Strong attention to detail and the ability to concentrate for long periods of time. Hearing level within normal/average range. Working Conditions: First shift position. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or slippery conditions; high, precarious places; fumes and chemical; extreme heat and vibration. The noise level in the work environment is usually loud. The employee is required to work with cutting fluids (such as oils and coolants). Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9.M.S. Aerospace Inc. 13928 Balboa Blvd S Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description WET Design Sun Valley, California Welcome to WET, the pioneering force behind groundbreaking fountain designs and engineering marvels worldwide, from the Fountains of Bellagio to the awe-inspiring Dubai Fountain (the world’s largest choreographed fountain), and hundreds more. WET harnesses the elements of nature – water, fire, ice, fog, and light – to evoke emotions, transcend the mundane, and captivate audiences across the globe. WET has established itself as a visionary design company. Our designs blend form, material, patters, acoustics and more to create spectacular places that visitors connect with. WET has been chosen to create for some of the most high-profile clients in the world. With award-winning and groundbreaking projects ranging from residential to government and corporate projects, we design water features for small or large footprints. Layout Welder Shift: 2nd Shift Time: 2:00 PM to 12:30 AM WHAT WE DO AT WET We create projects that transform the way people experience nature’s elements. Our creations are multi-sensory, and we redefine the way people connect with the elements and with each other. We master nature’s magic and with it create experiences. Experiences that include the world’s most moving water features, from The Fountains of Bellagio to The Dubai Fountain. SUMMARY The Layout Welder is able to interact with all Production teammates and who can do their own fixturing and setup their own processes completely independently. All welders need to be extremely fast paced, self-motivated, team players who can keep their area clean and organized, can TIG and MIG stainless steel safely, proficiently and quickly This role will be working heavily on the electrical enclosures, specifically the doors and panels along with finish grinding the weldments. This mostly requires MIG welding 14ga CRS, stud welding, and doing cosmetic post weld grinding and material handling. They will also help with other welding needs as capacity allows/requires. THE CORE OF THE POSITION: • TIG welding stainless steel components, • Experienced with cosmetic grinding of Sheetmetal panels, • MIG welding mild steel Sheetmetal, • Able to follow written and verbal instruction, • Ensure quality of work, check own work and work of others in department, • Self-starter, highly motivated working in a fast-paced department, • Regularly handle electrical panel frames and door weldments in excess of 65lbs, • Experience with band saws, circular saws, grinders, and other fabrication equipment, • Material handling of raw goods and finished weldmentsQUALIFICATIONS:, • 7+ years of Welding experience with Welding Layout's, • 5+ years of TIG Welding, • 3+ years of MIG welding, • Must be able to lift at least 65+ lbs., • Stand 8+ hours per day Powered by JazzHR viKrXEgcFu

Job DescriptionReports To: Mitigation Manager What does a Restoration Lead Water Technician with Paul Davis do? • Serve others within your community in their time of need, • Make a difference for others that have had a disaster strike their property, • Work hard and take pride in completing projects (i.e. mitigating flood and fire damage) Team Compensation and Benefits: • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time., • Paid training, • Bonus program for performance, • Referral program, • Great culture and team dynamic, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Fluent in English, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Ability to lift 75 LBS frequently, • Desire to continually learn new things, • Industry experience & Knowledge, • High level performance of water mitigation, tarping, board up, mold remediation, and carpet cleaning services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule., • Assist in warehousing and facility related tasks when necessary.

Job Description KDG Construction Consulting is seeking a Mechanical Inspector to join our growing team. The Mechanical Inspector will support the Airport’s Quality Assurance & Construction Inspection Division across multiple projects within the Capital Improvement Program. Responsibilities and Duties: • Inspect the construction of a wide variety of airport improvements and utilities projects to ensure conformance to plans, specifications, contracts, permits, environmental documents, agreements for work, and may provide construction inspection support., • Conduct comprehensive daily inspections of mechanical, electrical and plumbing systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • Demonstrate strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Verify contractor compliance with local and national electrical codes (e.g., NEC, NFPA 70, 70E, 72), mechanical and plumbing codes, and airport-specific standards., • Track and document time-and-material work, field changes, and job quantities., • Assist in validating contractor progress payment requests based on an approved schedule of values., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed., • Perform inspections of Mechanical, Electrical and Plumbing (MEP) installations including, but not limited to:, • Domestic Water and Sewage Systems, • Venting, fire sprinklers, and gas piping, • HVAC systems (air handlers, chillers, boilers, ductwork), • Smoke Control Systems, • Mechanical ventilation and exhaust, • Fire and life safety integration (e.g. smoke dampers), • Mechanical and plumbing shutdowns, lockout / tagout procedures, • Commissioning and balancing reports, • Underground utilities and duct banks, • High-voltage switchgear and electrical panels, • Conduit racks, conductors, and grounding systems, • Interior and exterior lighting systems, • Fire life safety systems including smoke/heat detectors and FM-200 suppression systems, • Electrical shutdowns, lockout/tagout procedures, and breaker coordination, • Inspect IT infrastructure installations such as:, • Low-voltage systems (voice/data, security, access control), • Door card readers, security cameras, and public address (P.A.) systems, • Communication cabling and equipment roomsRequired Qualifications:, • 3 years or more experience performing mechanical inspections for Building Construction, • Thorough knowledge of the materials and methods used in the installation of plumbing, heating, air conditioning and refrigeration installations, • Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings, • Plumbing experience (journeyman/master level) with progression into inspection, • Experience inspecting mechanical systems of large-scale commercial, industrial or public buildings, • Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects, • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials, • Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards, • Must be open to learning the prescriptive items required by the agency, • A strong understanding of diverse code requirements, • Excellent communication and time management skillsEducation/Training:, • High school diploma (or equivalent), • Current ICC Certification as a Commercial Mechanical, • CAL OSHA-30 certification, • Fall protection and harness training, • Confined Space Entry Training, • Additional Current ICC certifications as Electrical and Plumbing Inspector, • NFPA 70E standards training within the last 3 years is preferred, • Training & knowledge of NFPA -70, 70E, & 72 is preferredHardware/Software:, • Knowledge of Project Management Information Software used for inspection/document control (i.e. PM Web, Adobe Pro, Bluebeam, etc.). About KDG: KDG Construction Consulting is a leading provider of program, project, and construction management services. The firm serves clients in a broad range of markets throughout Southern California, including aviation, transportation, and infrastructure. KDG provides a full spectrum of management and technical services spanning the entire lifecycle of a construction project. Employment with KDG: KDG is an Equal Opportunity Employer, and qualified applicants will receive consideration for employment without regard to race, ethnicity, sexual orientation, gender identity, national origin, veteran status, or disability status. Powered by JazzHR zRzd8nSqa2

Job Description SMOG TECHNICIAN Los Angeles, CA Honda of DTLA is growing and we're looking for the best! Pay ranges from $18.00 -$25.00 per hour. WE OFFER: • Excellent medical, dental, vision options, • Life insurance, • Paid time off, • Employee discounts, • Paid training!, • Opportunity for career growth, • Excellent Pay, • Experienced Management and Supervision that includes continual "in house" Training and Support to improve skills, • Friendly, Team Oriented Environment, • Perform oil changes on guest vehicles, • Inspecting oil, cabin, air filters, and vehicle fluid levels and replaces or replenishes as necessary, • Check tire pressure and add air, as needed, • Rotate tires and inspect brake linings/drums and brake pads/discs, • Performs a thorough check of guests vehicles, refers needed repairs and preventive maintenance to service consultant, • Documents all work performed on repair order and inspection sheet, • Operates and maintains in good condition all lubrication equipment, • Assists the service department as needed, • Operates all tools and equipment in a safe manner, • Maintains assigned workspace organized and clean, • MUST HAVE PREVIOUS EXPERIENCE in the automotive field, • Smog Tech: Must have state required DEQ Smog Certificate., • Used Car Tech: Looking for a technician that can work on all makes and models., • High School Diploma or equivalent, • Ability to concentrate and accomplish tasks despite interruptions, • Ability to perform a variety of tasks simultaneously, • Must have Valid California Driver License and Clean Driving Record, • Must have a great attitude and be willing to constantly learn, • Must be customer focused and constantly provide a high level of service

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Training & development, • Reporting directly to the Sr Construction Manager for Scheduling and Estimating and provides updates and prepares reports for upper management in order to meet Key Performance Indicators., • Supervise Project Schedulers to ensure project timelines are met and interfaces with OARs, Senior Project Managers and other site staff and contractors related to the review of CPM schedules, preparation of project scope and budget., • Projects staffing needs and makes recommendations to executive staff to improve staff requirements., • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types., • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope., • Reviews Contractors Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments., • Performs QA/QC on contractor schedule submittals for conformance with contract terms; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones., • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements., • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit., • Performs Critical Path analysis and Earned Value analysis., • Walks the construction sites as needed and checks the contractors weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicates with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings., • Performs Program Schedule QA/QC reviews on a regular basis., • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis., • Minimum eight (8) years full time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects., • Proficiency in Primavera Latest Version and MS Office SuiteRequired Education:, • Graduation from a recognized college or university with a bachelors degree in any course, but with additional two (2) years of experience in Construction Scheduling to compensate for the required education.Required Skills:, • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Understanding of theories, principles and practices of cost engineering, scheduling and schedule forensics

Job DescriptionBenefits: • 401(k), • Dental insurance Maintenance Crew members are responsible for the day to day maintenance of hard and soft scape products, including: plants, groundscape, lighting, mulch. Furthermore, Maintenance Crew members are responsible for the overall maintenance of jobs sites, specific to client requests and contracts. Job Responsibilities: • Site Installation: Installation of plants, ground cover, lighting, • Site Maintenance: management of installed plants, management of ground over (gravel, mulch, etc.), fertilization of plants, watering, weeding and general site clean up, • Site Plants: proactively identify plants that are in distress or need to be changed out. Provide plant information to the maintenance manager who will work to identify new plants/ plant replacements as needed, • Plant status: identify plants that need to be swapped out or in distress and alert the Maintenance Manager of their findingsExperience a plus. Call Office Number at 323-925-5303 with any questions.

Job DescriptionJob Summary: We are seeking a skilled and detail-oriented Project Engineer with a strong background in mechanical and HVAC systems to join our team. The ideal candidate will be responsible for assisting in the planning, design, and execution of HVAC and mechanical projects. This role requires strong problem-solving abilities, technical expertise, and the ability to coordinate with multiple stakeholders to ensure project success. Key Responsibilities: * Assist in the design, development, and implementation of HVAC and mechanical systems for various projects. * Review and interpret engineering drawings, blueprints, and project specifications to ensure accuracy and compliance. * Work closely with project managers, contractors, and clients to coordinate project activities and resolve technical issues. * Prepare technical reports, cost estimates, and project schedules to ensure efficiency and feasibility. * Conduct site inspections and assessments to monitor project progress and quality control. * Ensure compliance with industry standards, local building codes, and safety regulations. * Assist in selecting and procuring mechanical equipment, materials, and subcontractors. * Provide technical support and troubleshooting assistance for HVAC and mechanical installations. * Utilize AutoCAD, Revit, and other design software to support project development. * Maintain accurate project documentation, including reports, change orders, and submittals. Qualifications: * Bachelor's degree in Mechanical Engineering or a related field. * Minimum of 4 years of experience in mechanical and HVAC engineering projects. * Strong understanding of HVAC systems, mechanical design principles, and energy efficiency standards. * Proficiency in AutoCAD, Revit, and other relevant engineering software. * Knowledge of ASHRAE standards, local building codes, and LEED requirements. * Excellent problem-solving, organizational, and communication skills. * Ability to manage multiple projects while maintaining attention to detail. * Familiarity with project management tools and estimating software is a plus. Work Environment: * This role involves working in an office setting with frequent on-site visits to project locations. * May require occasional travel to meet with clients, contractors, and vendors. * Some evening or weekend work may be necessary depending on project deadlines. If you have a passion for mechanical and HVAC engineering and are eager to contribute to high-quality projects, we encourage you to apply for this exciting opportunity.

Job Description Biomedical Equipment Technician III, Healthcare Facility or Healthcare Setting, Clinical Devices, Servo U, V60, Trilogy EV300 Ventilators, GE Anesthesia, Experience level: Mid-senior Experience required: 5 Years Education level: Associate degree Job function: Management Industry: Hospital & Health Care Compensation: $71,000 - $90,000 Total position: 1 Relocation assistance: Yes Visa sponsorship eligibility: No Job Description: seeking a Biomedical Equipment Technician III for Hospital located in Los Angeles, CA. A valid drivers license and acceptable drivers license record check is required What You'll Do: • Formal training and preferred experience servicing clinical equipment, • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Leadership experience with mentoring., • Proactive thinking skills to troubleshoot, • Preferably 7-10 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting, • Basic knowledge of networking theory, • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment, • Substantial knowledge of basic anatomy, physiology, and medical terminology Troubleshoots, inspects, repairs, maintains and calibrates an advanced range of clinical equipment, devices, systems and instruments. Monitors, mentors and supports lower level BMET positions. Key Duties • Inspect, maintain, repair and calibrate equipment and systems, • Ensures regulatory compliance, • Develops staff by teaching and mentoring others, • Provides advanced support of equipment for direct patient care, • Provides advanced support of equipment for direct patient care, • Interacts on a routine basis with clinical health providers in the identification of technology based problems and solutions, • Solves organization-level customer service issues and complaints, • Preparing required documentation and reports, • Demonstrates a safety mindset, • Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • 7 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting., • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment., • Leadership experience with mentoring.

Job DescriptionPosition Summary As a Drywall Estimator, you will lead the full bid processfrom organizing bid documents to delivering professional proposals. Your deep understanding of construction methods and building standards will ensure accurate, competitive estimates that position the company for success. This role offers a compensation range of $85,000 to $125,000 per year, along with a generous benefits package, including: • Performance bonuses, • Stock options, • Profit-sharing Bid Process Management • Organize and review bid documents for clarity, completeness, and compliance with company standards, • Analyze plans and specifications, identifying and resolving any ambiguities before submission, • Prepare detailed quantity takeoffs for labor, materials, and equipment, • Customize quantity data per client request (by area, trade, or building component), • Facilitate bid reviews, ensuring timely confirmation of estimating assumptions, • Stay informed on construction techniques, labor rates, materials, and building codes, • Incorporate scheduling, sequencing, and safety considerations into cost estimates, • Collaborate with project management on production goals and subcontractor quotes, • Confirm contract scope and participate in project turnover meetings, • Assist in building budgets, procuring materials, and selecting subcontractors, • Support change order processes and monitor project progress Education & Experience • 4-year degree in Construction Technology or equivalent technical training/experience, • In-depth knowledge of construction methods and codes, • Strong analytical and problem-solving skills, • Excellent verbal and written communication, • Effective collaboration with customers, subcontractors, and internal teams, • Ability to manage multiple bids under deadlines, • Proficient with cost estimating and quantity survey software Qualifications SkillsPreferred00 - ESTIMATING Intermediate BehaviorsPreferredTeam Player : Works well as a member of a group Dedicated : Devoted to a task or purpose with loyalty or integrity MotivationsPreferredSelf-Starter : Inspired to perform without outside help

Job DescriptionDescription: We are seeking a reliable and technically skilled Call Center Technician to join our growing tech team. In this role, you will provide first-line technical assistance to customers over the phone, via email, or chat. You will troubleshoot product or service issues, provide guidance, and ensure a high level of customer satisfaction. Key Responsibilities: • Answer incoming customers calls in a professional and timely manner, • Troubleshoot and resolve hardware/software or service issues, • Guide customers through step-by-step solutions, • Escalate complex problems to appropriate teams, • Log all customer interactions and updates accurately in the ticketing system, • Follow up on unresolved cases to ensure closure, • Maintain a strong understanding of company products and services, • Support cross-functional teams when needed Qualifications: • 1+ year of experience in a call center or technical support environment, • Strong verbal and written communication skills, • Excellent problem-solving and customer service abilities, • Ability to work under pressure and multitask in a fast-paced environment Requirements:

Job Description The Tsui Group is seeking a candidate who is qualified and experienced in educational facility construction projects to serve as a Senior Regional Construction Scheduler for a large educational client within Los Angeles County with the below duties: • Reporting directly to the Sr Construction Manager for Scheduling and Estimating and provides updates and prepares reports for upper management in order to meet Key Performance Indicators., • Supervise Project Schedulers to ensure project timelines are met and interfaces with OARs, Senior Project Managers and other site staff and contractors related to the review of CPM schedules, preparation of project scope and budget., • Projects staffing needs and makes recommendations to executive staff to improve staff requirements., • Develops and maintains program schedules identifying relationships, logic, milestones, and constraints for construction projects of various types., • Independently interprets and reads detailed construction drawings (Architectural, Structural, Mechanical, Electrical, Plumbing, Civil, etc.) and develops a clear understanding of work scope., • Reviews Contractor’s Baseline schedule submissions and verifies that all work scope is identified properly and logically sequenced correctly; provides written detailed schedule review comments., • Performs QA/QC on contractor schedule submittals for conformance with contract terms; reviews critical path, cost loading, resource loading of man-hours, schedule content, recovery schedules, use of logic relationships and lags, constraints and milestones., • Performs schedule Time Impact Analysis for any change orders that affect the construction schedule; conducts schedule negotiations with the OAR and the contractor for any delay time settlements., • Reads drawings to determine if work is in or out of scope, and understands terms and conditions of the contract to determine if any compensable or non-compensable time extensions have merit., • Performs Critical Path analysis and Earned Value analysis., • Walks the construction sites as needed and checks the contractor’s weekly/monthly schedule progress; provides reports to the project OAR and upper management., • Effectively communicates with the Contractor regarding all schedule/progress related matters and concerns in the weekly status meetings and all other schedule related meetings., • Performs Program Schedule QA/QC reviews on a regular basis., • Performs status updates for Program Schedules/Master Schedules on a bi-monthly basis. Minimum Required Experience: • Minimum of 8 years of full time paid professional experience in Construction Scheduling for an Owner or General Contractor, preferably in an educational facility or public works projects., • Excellent written and verbal communication skills, • Superior organizational and planning skills, • Ability to build efficient working relationships with project teams and department staff, • Salary Range:$153,000-$158,000, • Medical, Vision, & Dental – 100% covered for the employee*, • Life and Disability Insurance, • 10.5 days of Vacation pay (Accrued), • 6 days of Sick pay (Available Immediately), • 13 days of Holiday pay, • 3% Employer Contribution 401k (After 1 year of service), • Monthly Stipend for Cell Phone, • Laptop for work purposes

Job Description Description Receive samples, unpack coolers, label containers Scan shipping documentation, and perform sample login Assist Analytical Services Managers with Sample Group set up, Bottle Orders, and login review Produce bottle kits, add preservatives to containers, and perform Shipping and Receiving duties. Organizing walk-in refrigerators and sample disposal queue Clean equipment, such as glassware, coolers, sinks, tables, samplers using solvents, water and detergents or acids according to Standard Operating Procedures Performs sample disposal, waste accumulation and other related waste disposal duties Manages subcontracted work to outside labs As assigned take warehouse inventory, assist in receiving, stock and rotate inventory and refill workspace stock Performs sample disposal, waste accumulation and other related waste disposal duties. Performs routine duties throughout the laboratory shipping department which would be responsible for: Prepare and send out bottle order kits Pour off bottled water samples received from clients in Large counters into appropriate bottles for the lab to analyze. This would be like a splitter function. Collecting subcontract bottles to be sent to other labs for analysis, packing them, and sending them to appropriate sublab. Cross train in login role below as back up login which would be responsible for: Triage samples once received to the lab and make sure all sample acceptability criteria is met (such as samples submitted on ice, temp requirements satisfactory, etc) Login samples into our LIMS system Label samples and put them into the correct location in the walk in fridge Provide subcontract samples to shipping department to be processed Cross train in shipping roles above as back up Skills Sample prep, Data entry, Laboratory, Sample Top Skills Details Sample prep,Data entry,Laboratory,Sample Additional Skills & Qualifications High School Diploma Minimum Must be able to lift 60 pounds Must have computer (Word, Excel) and document control experience Experience Level Entry Level Pay and Benefits The pay range for this position is $19.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Monrovia,CA. Application Deadline This position is anticipated to close on Sep 4, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Title: Automobile Technician Department: Service Department Reports to: Service Manager Position Description: The Automobile Technician is responsible for inspecting, maintaining, and repairing cars and light trucks. She/he provides the mechanical support for the automobile dealership. Requires proficient use of tools, such as: computerized diagnostic tools and power tools (pneumatic wrenches, lathes, welding torches, jacks, and hoists). Duties & Responsibilities: • Organizing and coordinating schedules, • Analyzing and interpreting data, • Calibrating precise measurements, • Problem solving, • Communicating with the public, • Completion of written work order, • Manual dexterity Refrigerant Handling License & Master Automobile Technician Certification required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to lift or carry 40-60 lb. mechanical parts and tools, bend, kneel, reach, stand for long periods of time, climb ladders, or handle and assemble parts. Frequently uses small hand tools and computer. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate or loud. THE ABOVE DECLARATIONS ARE NOT INTENDED TO BE AN “ALL-INCLUSIVE” LIST OF THE DUTIES AND RESPONSIBILITIES OF THE JOB DESCRIBED OR OF THE SKILLS AND ABILITIES REQUIRED TO PERFORM THE JOB. RATHER, THEY ARE INTENDED ONLY TO DESCRIBE THE GENERAL REQUIREMENTS OF THE JOB. Signature (Employee) Date Signature (Supervisor) Date

Job Description Dabri, Inc. is a professional program management, infrastructure engineering, and construction management consulting firm, serving Northern and Southern California Area since 2001. We provide project management, engineering, construction management, cost estimating, scheduling, QA/QC, project controls, change management, and general consulting services for public and private projects; specialized in a wide range of market sectors including transportation, infrastructure, water/wastewater, aviation, recreation, educational, and healthcare facilities. Dabri is seeking an experienced Construction Logistics Specialist on a full-time basis to work in Los Angeles County. Position Description • Wayfinding specialists with multiple years of airport experience skilled in creating, implementing, and overseeing temporary wayfinding strategies that support pedestrian flow and user experience., • Proficient in assessing signage quality, visual appeal, and adherence to standards, with the ability to recommend sign types specific to each project., • Experience managing multiple collaborative wayfinding projects with multidisciplinary teams, including staff with technical and non-technical backgrounds. Must coordinate across various disciplines, meeting multiple deadlines under pressure in a dynamic environment., • Proficient in reading, interpreting, and analyzing project schedules, Gantt charts, and design plans. Capable of evaluating signage needs based on construction activities, environmental factors, and user expectations to maintain effective wayfinding., • In-depth understanding of signage materials, fabrication methods, color theory, typography, and font specifications. Knowledge of signage, temporary wayfinding, and mapping industry best practices., • Ability to review projects' submittals Phasing Plan and Site Logistics Plans as submitted through the ASR and LIR processes with a keen eye for wayfinding impacts., • Strong visualization skills. Experience in developing concepts, location plans, and proposed wayfinding paths of travel with high visual impact., • Proficient in planning, production, and installation of temporary wayfinding that translates complex information into easy-to-understand visuals., • Hands-on experience with installation procedures, including regular site walks to evaluate signage effectiveness and updates to plans as needed., • Skilled in tracking phasing for production, and installation schedules across multiple projects, ensuring timely completion and a holistic approach across projects., • 10 years or more experience, preferably on airport building programs or similar complex building programs., • Bachelor's degree in Architecture, Aviation, Business, Engineering, Construction Management, Planning or other related technical field required. Master's degree preferred., • Optional Certifications may include AAAE, LEED, PMP, PE, AICP etc. or any other relevant Professional Licensure or Certifications., • Proficient in Adobe Creative Suite and Bluebeam for creating, editing, and reviewing visual materials and layouts. If you are meeting the above experience and education requirements, please submit your resumes, project details in word format along with three professional references. The candidate must have either a green card or permit to work (US Citizen). No visa sponsorship available. No Relocation assistance allowed. Powered by JazzHR TnLeQPsd0s

Job Description What You'll Do: • Formal training and preferred experience servicing clinical equipment, • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Leadership experience with mentoring., • Proactive thinking skills to troubleshoot, • Preferably 7-10 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting, • Basic knowledge of networking theory, • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment, • Substantial knowledge of basic anatomy, physiology, and medical terminology Troubleshoots, inspects, repairs, maintains and calibrates an advanced range of clinical equipment, devices, systems and instruments. Monitors, mentors and supports lower level BMET positions. Key Duties • Inspect, maintain, repair and calibrate equipment and systems, • Ensures regulatory compliance, • Develops staff by teaching and mentoring others, • Provides advanced support of equipment for direct patient care, • Provides advanced support of equipment for direct patient care, • Interacts on a routine basis with clinical health providers in the identification of technology based problems and solutions, • Solves organization-level customer service issues and complaints, • Preparing required documentation and reports, • Demonstrates a safety mindset, • Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • 7 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting., • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment., • Leadership experience with mentoring.

Job Description Biomedical Equipment Technician III Los Angeles, CA The client is seeking a Biomedical Equipment Technician III for PIH Health Good Samaritan Hospital located in Los Angeles, CA. A valid drivers license and acceptable drivers license record check is required What You'll Do: • Formal training and preferred experience servicing clinical equipment, • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Leadership experience with mentoring., • Proactive thinking skills to troubleshoot, • Preferably 7-10 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting, • Basic knowledge of networking theory, • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment, • Substantial knowledge of basic anatomy, physiology, and medical terminology Troubleshoots, inspects, repairs, maintains and calibrates an advanced range of clinical equipment, devices, systems and instruments. Monitors, mentors and supports lower level BMET positions. Key Duties • Inspect, maintain, repair and calibrate equipment and systems, • Ensures regulatory compliance, • Develops staff by teaching and mentoring others, • Provides advanced support of equipment for direct patient care, • Provides advanced support of equipment for direct patient care, • Interacts on a routine basis with clinical health providers in the identification of technology based problems and solutions, • Solves organization-level customer service issues and complaints, • Preparing required documentation and reports, • Demonstrates a safety mindset, • Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., • 7 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting., • Experience in a healthcare facility or healthcare setting, • Experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., • Considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment., • Medical, Dental, Vision Care and Wellness Programs, • 401(k) Plan with Matching Contributions, • Paid Time Off and Company Holidays 1. Do you have a Associate's degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environment., 2. Do you have 7 years of experience in electronic, mechanical or electro-mechanical repair in a health care technology setting., 3. Do you have experience in a healthcare facility or healthcare setting, 4. Do you have experience effectively repairing, maintaining and calibrating clinical devices such as, but not limited to: Servo U, I, V60s, Trilogy EV300 Ventilators, GE Anesthesia or Training, OR exp., Telemetry preferred., 5. Do you have considerable knowledge of electronic circuitry and technical aspects of the operation, repair and maintenance of electronic equipment., 6. Do you have leadership experience with mentoring., 7. Must be a US Citizen or Green Card holder.

Job Description About Us At Primex Clinical Laboratories, we're dedicated to enhancing health with precision and passion. Since 1996, our presence in clinical diagnostics has been unwavering, serving clients across Central and Southern California, Nevada, and American Samoa. We pride ourselves on delivering personalized service and high-quality testing with quick, accurate results. Role Summary The Overnight Laboratory Pre-Analytical Technician plays a crucial role in a clinical laboratory by handling and preparing patient specimens for testing during the night shift. This position is responsible for after-hours operations such as answering late-night phone calls, accessioning and processing specimens, and resolving any specimen issues to maintain workflow continuity. Working primarily in the pre-analytical phase of testing, the technician ensures that all samples are correctly identified, documented, and made ready for analysis by the technical team. This is an mid afternoon to overnight role, making the ideal candidate is a dependable, detail-oriented professional who can work independently with minimal supervision while upholding the laboratory’s quality and safety standards. Key Responsibilities • Specimen Receipt & Accessioning: Receive incoming specimens (e.g. blood, urine, other clinical samples) during overnight hours and verify all identifying information. Accession each specimen by accurately entering patient data and test orders into the Laboratory Information System (LIS), ensuring that samples are logged correctly for processing., • Sample Processing & Aliquoting: Perform pre-analytical processing of specimens, including centrifugation and aliquoting (sample splitting) as required. Sort and distribute specimens to the appropriate laboratory departments or storage areas, preparing them for analysis according to standard protocol., • Problem Specimen Resolution: Review and troubleshoot problem specimens or requisition issues that arise during the night. Identify samples that are unlabeled, mislabeled, or have missing information and take corrective action or escalate as necessary. Document and resolve these specimen discrepancies to prevent testing error., • After-Hours Communication: Serve as the primary laboratory contact during the overnight shift. Answer after-hour phone calls promptly and professionally, addressing inquiries from healthcare providers or laboratory employees and providing needed information or support. This includes coordinating with on-call personnel if urgent issues or critical values need attention., • Data Entry & Record Keeping: Maintain accurate data entry and documentation for all specimens processed during the shift. Ensure that patient information, test requests, and any updates or corrections are entered into the LIS or tracking logs with a high degree of accuracy. Protect patient confidentiality and follow data entry protocols to avoid transcription errors., • Quality & Compliance: Adhere to all laboratory safety guidelines and standard operating procedures. Handle biohazardous materials using proper protective equipment and techniques, and ensure compliance with regulatory standards (e.g. HIPAA, OSHA) during specimen handling and data management Maintain an organized and clean work area, and prepare the laboratory for the next shift by securing specimens or equipment as needed. Key Qualifications * Experience in specimen handling, processing, and data entry within a clinical laboratory environment. * Strong attention to detail with ability to resolve specimen discrepancies and maintain accurate records. * Effective communicator, able to manage after-hours calls and coordinate with clinical staff. * Dependable, flexible, and capable of working independently during mid-afternoon to overnight shifts. * Knowledge of laboratory safety practices and regulatory compliance (HIPAA, OSHA). Additional Requirements • May require occasional weekend availability, • Must be highly reliable, courteous, and team-oriented, • Strong adaptability to changing priorities and workflow. Primex Clinical Laboratories is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, disability, veteran status, or any other legally protected status.

Job DescriptionSalary: 21-34 p/h Tina's Burritosis the leading CPG brand of frozen single serve burritos in America and is owned by Camino Real Foods, Inc. We bake up a million budget friendly burritos in our Los Angeles, CA factory daily and serve them to burrito lovers who appreciate great taste, convenience, and quick meals filled with important daily nutrients. All of our products are slow cooked in large kettles so the spices and flavors meld together for a flavor profile that is the industry leader, and then flash frozen for freshness. From Moms to Movie Stars, many customers write in and say they have been "addicted" to our burritos since 1984 when we first started making them. Others write in and say they started buying our products with food stamps because it was all they could afford, but now they buy Tina's Burritos with money in the bank. We are very proud to be able to produce a quality product that helps eliminate food insecurity in America and save our customers time and money that can be put towards advancing their own lives. You can find our products in the frozen aisle and deli section of your favorite grocery or convenience store nationwide. From our freezer to yours with love, For more information visit The Electrical Mechanical Technician will be responsible performing preventative and predictive maintenance, repairs and installation of machinery and equipment, advanced diagnostic troubleshooting as well as complete teardown, rebuild and remanufacture of machinery and related systems. In addition, the Electrical Mechanical Technician will mentor the department technicians in all preventative and proactive maintenance functions of the equipment in production. This position is team oriented driven, with excellent communication within the departments as well as the ability to identify problems with team members before issues arise. ESSENTIAL DUTIES & RESPONSIBILITIES: Troubleshoot and replace faulty machine components such as (but not limited to): motors, drives, PLC controls, programming, commissioning/start-up of control systems, gearboxes, tooling equipment, Blow mold equipment, hydraulics, pneumatics, AC and DC drives and control systems Executes daily machine checks, lubrication, machine start-up, clean-up, changeovers and adjustments to maintain operational eiciency. General Electrical work including but not limited to layouts, assembling, installing and testing of electrical apparatus, measuring, cutting, threading and bending conduit, and installing, modifying and repairing panel boxes, remote control equipment, motors, power and lighting circuits. Maintenance of control equipment, general instrumentation and electrical control systems to carry out first line diagnostic, troubleshooting and maintenance work. Read and understand electrical schematic diagrams as well as industrial three phase 240V and 480V power distribution and VFD wiring practices. Troubling shoot, program and/or replace PLCs equipment Have a broad general knowledge of welding techniques (i.e. MIG, TIG, and Stick) and must be able to apply these techniques to various operations within the plant. Operate various power tools including but not limited to torque wrenches, calipers, and gauges in a safe and proficient manner Ability to complete all work in accordance with EPA, OSHA, NED, NFPA70 standards Responsible for keeping the parts and supply of electrical inventory. Excellent documentation and communication skills both oral and written Performs root cause failure analysis to eliminate repeat occurrences on maintenance issues Responsible to perform duties and activities as directed by management Maintain continuous improvement and comply with all safety requirements. OTHER DUTIES & RESPONSIBILITIES: Overtime, when necessary, weekends. Performs repairs and maintenance functions with a sense of urgency The ability to work independently Possesses leadership and mentorship attributes in a teamwork driven environment Excellent problem-solving skills Ability to follow-through on commitments Ability to multi-task; comfortable in matrix organization structure. Sweep, pick up and keep a clean and orderly work area Participate in on-going Safety, ISO and quality training. REQUIREMENTS: (Education, Experience, Certifications, Skills) Electrical certification/ or experience in electromechanical technology or similar (industrial maintenance, electronics technology) a minimum of 5 years experience. Must be bilingual Spanish Please watch this short video to hearWhat Makes Tina's Burritos So Specialin the words of our employees, managers, and CEO.

Job Description Mission Community Hospital is a 145 bed acute care facility with a 50 year legacy serving the San Fernando Valley with compassionate care. Currently we seek a Part Time Diet Technician who is responsible for the nutritional care of all in-patients with guidance from the Registered Dietitian. The DTR performs data collection of nutrition information from the medical record, assigns a priority level of care and assists in the care plan of the patient, directed by the RD. This includes diet education, follow up care on lower level nutrition risk patients (if needed), monitoring tray line service and verifying diet orders and menus of patients. KEY RESPONSIBILITIES Intermediate Assessments/Patient Care – 70% Collects data from the medical record and interviews patients Assigns priority level of patient bases on data and interview Educates patient on Food-Drug Interactions and basic concepts of therapeutic diets May assist with calorie counts Assists with patient menu selection when needed. The DTR communicates, on a daily basis, with co-workers, nursing and ancillary departments with regards to patient's nutritional needs. Examples include, but are not limited to, change in diet orders, texture, cultural or religious food preferences, supplements, etc. Reports discrepancies to RD and diet clerk. Tray line – 20% Monitors accuracy of tray line service for proper diets, serving sizes, food quality and timeliness of service. Corrects any errors made on tray line and reports deficiencies in knowledge of therapeutic diets on tray line to the Food Service Director or the Supervisor. Other – 10% In Service Education for Dietary staff Filing of cardex’s Monthly meal rounds QUALIFICATIONS Required Ability to read, write and speak English proficiently. Must provide for confidentiality, privacy and safety of patients, visitors and staff at all times. Must be available to work all shifts if needed. Active registration as a Registered Diet Technician with the American Dietetic Association. Fire Card – to be obtained within the first 90 days of hire Preferred: Six months experience as a DTR in an acute care setting

Job Description Crane Operator is responsible for the safe and effective operation of computerized mobile cranes. Principal Accountabilities • Operate mobile crane and move materials to various locations in a safe and effective manner, • Inspect, rig, and ensure that rigging applications are configured in accordance with the load chart and manufacturer guidelines, • Inspect, clean, and perform operator level maintenance on equipment in accordance with standards, • Closely interact with the customer for movement of materials and equipment, • Perform daily safety checks to ensure equipment is in safe operating condition, • Follow related safety regulations, contract requirements, company policies, and operating procedures, • Complete necessary documentation, reporting, and limited office duties, • Perform other duties as assignedKnowledge & Skills, • Knowledge of equipment safety, maintenance, and storage, • Analytical and problem-solving skills, • Ability to work with limited supervision, • Ability to read, write, and speak English fluently in order to understand equipment load charts, prepare written orders, read safety topics, etc., • Additional knowledge and skill requirements may vary by assignmentExperience & Education, • Minimum five (2) years of verifiable experience operating cranes, • High School Diploma or equivalent, • Valid commercial driver’s license, • Ability to obtain, through evaluation, the certification to operate computerized mobile cranes up to eighty (100) tons, • Additional experience and education requirements may vary by assignmentPhysical Requirements/Working Environment, • Ability to lift fifty (50) pounds, bend, stoop, and work safely around equipment, materials, supplies, and other items to be handled, • Living and working conditions at assignment location could be remote and uncomfortable, • Long hours, exposure to weather and hazardous conditions, • Personnel should be aware of moving on short notice and under adverse conditions

Job Description JOB TITLE: SOLAR ESTIMATOR REPORTS TO: PROJECT MANAGER JOB PURPOSE: The Solar Estimator is responsible for preparing accurate cost estimates for solar energy projects, ensuring that bids are competitive and financially viable. This role involves reviewing project specifications, conducting site assessments, analyzing labor, materials, and equipment costs, and collaborating with project managers, engineers, and clients to develop winning proposals. Who Is Powerfull Solar: Powerfull Solar is the fastest growing brand in the solar industry with a hyper-focus on transitioning the world to renewable energy. We are obsessed with providing the absolute best customer experience, and only allow top-tier individuals into our company. At Powerfull Solar, you will be surrounded by a family of highly ambitious and motivated self-starters who are acutely focused on building a lucrative career for themselves in solar. We are an incubator for your success and can help you achieve whatever your personal and income goals may be. Guiding Principles · Passion · Innovation · Consistency Core Values · Quality · Integrity · Teamwork · Safety DUTIES & RESPONSIBILITIES: Estimating & Proposal Development • Review project plans, specifications, and requirements to understand scope and deliverables., • Conduct site visits and assessments to gather necessary data for accurate pricing., • Prepare detailed cost estimates for labor, materials, equipment, subcontractors, and other project expenses., • Analyze bids from vendors and subcontractors to ensure competitiveness and compliance with project requirements., • Identify potential cost-saving opportunities without compromising quality., • Evaluate project risks and factor contingencies into estimates., • Work closely with project managers, engineers, and sales teams to refine proposals., • Communicate clearly with vendors and subcontractors to obtain accurate pricing and delivery timelines., • Stay current with industry pricing trends, technologies, and best practices. Education & Experience · High school diploma or equivalent required; bachelor’s degree in construction management, engineering, or related field preferred. · 3+ years of experience in estimating, preferably in solar, renewable energy, or electrical construction. Skills & Competencies · Strong understanding of solar PV systems, components, and installation processes. · Proficient in estimating software, MS Excel, and project management tools. · Excellent mathematical, analytical, and problem-solving skills. · Strong communication and negotiation abilities. · Ability to read and interpret construction drawings, schematics, and specifications. General • Fluent in English: Speaking, Understanding, Reading and Writing., • Be a problem solver who has a demonstrated ability to overcome challenges with creative solutions, • Detail oriented with strong organizational skills., • Working knowledge of Spanish is desirable, but not required. Working conditions: · Fast-paced environment requiring flexibility, adaptability and resilience in a wide variety of work situations. · Nature of business results in many tight or continually changing deadlines. · General exposure to outside environmental elements, with low to medium noise, exposure to heat and cold. · Work performed at active construction sites, requiring proper PPE at all times. · May require travel to various job sites. · Extended hours, weekends, and overtime may be required based on project needs. PHYSICAL & WORK REQUIREMENTS · Ability to conduct site visits, including climbing ladders and working in outdoor environments. · Prolonged periods of sitting and working at a computer. · Travel to job sites and client meetings as needed · The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. · Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. WORK ENVIORNMENT: · This position typically operates in an office setting with occasional field visits to project sites. ACKNOWLEDGMENT Company DescriptionPowerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. We provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. Our employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. We are POWERFULL ELECTRIC!Powerfull Electric Inc. is an electrical contracting company dedicated to providing luxury residential homeowners with revolutionary technologically advanced electrical systems. \r\n\r\nWe provide white glove service, unmatched quality and custom craftsmanship for our clients both during construction and the lifespan of your estate. \r\nOur employees are our backbone and they are the technical experts in all aspects of design, development, planning, executing and administration of all your electrical needs. \r\nWe are POWERFULL ELECTRIC!

Job Description BOWE US is rapidly expanding in North America and we need your technical expertise! BOWE US, a wholly owned subsidiary of the BOWE Group, is a leading supplier of production mail and parcel automation equipment and is one of the world’s leading solution providers for modern print and mail production centers. BOWE Group is a global company headquartered in Augsburg, Germany just outside of Munich. The US subsidiary is responsible for the sales and service of all equipment within the North American market. Our service technicians are assigned to work at various customer site locations, assisting with machine service and preventive maintenance. We are looking for candidates that are highly motivated, extremely mechanical and self-starters for several locations throughout North America. Position Overview: As a Bowe technician, you will utilize your technical skills and knowledge to perform preventative maintenance, quickly diagnose problems and perform the necessary repairs. When a machine is out of service, the focus is to return the system back to production all while adhering to the Company’s procedures for proper repair, safety and escalations. This is customer-facing role so providing a positive experience for our customers is critical. Necessary Skills for Success: • Strong customer relations skills, • Excellent analytical and problem-solving skills, • Ability to read schematics, • Proficiency in windows operating systems, • The ability to utilize your knowledge of mechanical and electrical systems to troubleshoot machine problems. System repairs are roughly 80% mechanical and 20% electrical with a software component overlay, • Ability to maintain focus under pressure while retaining a positive attitude, • Tools are provided – No need to purchase your own tools, • Company work shirts are provided, • Training – Both practical on the job training and factory certified training will be provided, • Support – Access to factory documentation along with local and national technical support resources, • Safety – A neat, clean, well-organized work environment where safety is a focus, • Climate controlled facilities – Facilities are indoors and climate controlled, • An attractive benefits package and competitive pay, • Shift premiums for 2nd and 3rd shift technicians. Applicable and Transferable Skills: At Bowe, we understand that great customer service skills and technical aptitude exist in many industries. If you have a technical background in electronics and/or mechanics and think you would be a good fit for our team, please do not hesitate to apply. Many of our technicians come to us from various technical backgrounds, such as electro-mechanical, mechatronics, automation, robotics, automotive mechanics, facilities maintenance, equipment operators and field service technicians to name a few. If you are eager to learn and grow your technical skills while being part of a dynamic team, BOWE is the place for you!

Job Description CNC Mill or Lathe Machinist – 1st and 2nd Shift Immediate Temp to hire position – City of Monrovia, CA Essential Functions: • Perform Set-Up’s and Operate CNC Mill/Lathes Machines According to Process Sheets under General Supervision (Intermediate Level)., • Perform CNC Mill Set-Up’s and Operate CNC Mill/Lathes Machines According to Process Sheets with No Supervision or Assistance (Advanced Level)., • Create (Advanced Level); Edit, Send, or Retrieve CNC Programs From Systems Files as Required For Mill Machine Set-up and Operation., • Read and Interpret Manufacturing Paperwork (Travelers, Blueprints, Sketches, Etc.) in Order to Produce Products as Required by Customer Specifications and Quality Standards., • Inspect and Verify Own Work Prior to Submitting to Quality Department For First Article Inspection., • Meet Needed Quote Times and Schedule for Assigned Work., • Correctly Process Required Work-Related Paperwork and Material Requirements Planning (MRP) Documents., • Communicate Regularly With Supervisors and Other Employees Regarding any Production Issues and Ways to Eliminate Possible Errors on Set-up and/or Programming., • Perform Non-CNC Tasks When Necessary, such as Hand-Work Operations., • Evaluate and Update “Estimated to Actual” Cycle Times., • Conduct All Shop Functions in a Safe Manner., • Minimum of 3 Years of Relevant CNC Mill/Lathe Machine Experience is required (Intermediate Level). Certificate from NTMA or Other Technical School is a Plus., • Firm Understanding of Mill Programs Including Formatting and Editing Programs., • Ability to Read and Understand Blueprints and Technical Documents., • Ability to Use Various Inspection Tools Such as Micrometers, Calipers, Height Gages, and Comparators., • Familiarity with Coordinate Measurement Machines (CMM) is desired (Advanced Level)., • Strong Shop Math Skills Including the Ability to Perform Measurement Conversion., • A Genuine Belief in Continuous Improvement and a Disciplined Process., • Organization and Time-Management Skills., • Excellent Verbal and Written Communication Skills.Company DescriptionAs a women/minority owned staffing company, we currently are certified with the following organizations: SBA 8(a), Southern California Minority Business Development Council, Metropolitan Water District of Southern California, Women Business Entity, Minority Business Entity, and as a Disadvantaged Business Entity.As a women/minority owned staffing company, we currently are certified with the following organizations: SBA 8(a), Southern California Minority Business Development Council, Metropolitan Water District of Southern California, Women Business Entity, Minority Business Entity, and as a Disadvantaged Business Entity.

Job DescriptionDescription: SUMMARY: The Back Office Technician is responsible for performing a variety of patient care, office, and laboratory duties. The Back Office Technician prepares patients for examination and assists other optical professionals in providing treatment to the eyes. ESSENTIAL FUNCTIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily with or without accommodation. The requirements listed below are representative, but not all inclusive, of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. • Ensures a positive and professional environment where patients feel comfortable; prepares patients for treatment and assists doctors., • Collects and documents the patient’s chief complaint., • Verifies patient’s ocular and medical health history. Documents any medications patient is taking., • Obtains consents from patients. Ensures patients read and sign the consents., • Performs Refractions., • Administers basic Visual Acuity (VA) assessments., • Performs intraocular pressure (IOP) tests with a Tonopen unit., • Takes Fundus photos., • Administers a Visual Field (VF) test., • Performs Flourescein Angiogram (FA) procedures., • Performs Indocyanine Green Angiography (ICG) procedures., • Administers topical ophthalmic and dilation medications to patients., • Maintains a clean, sterile, and stocked exams rooms., • Provides written instructions and/or patient education materials for the patient to review at home. Ensures patient understands all instructions., • Provides accurate documentation and summarization of an ocular examination, while maintaining patient flow and communication regarding appointment status., • Files patient forms and updates information in CareCoud/EMR system., • In some clinics, may be required to drive patients in a company-provided vehicle., • Maintains an appropriate professional appearance and demeanor in accordance with Company policies., • Keep commitments and keep direct supervisor informed of work progress, timetables, and issues., • Maintain strict compliance with State, Federal and other regulations (e.g., OSHA, WC, HIPAA, ADA, FEHA, DOL, HR policies and practices)., • Other duties as assigned by management. Requirements: REQUIRED: High School education, GED or equivalent. Valid driver’s license and automobile insurance. Ability to travel to other clinics as assigned. DESIRABLE: Experience in the Ophthalmic or Optometric Industry. Experience as a Back Office Technician. CERTIFICATES/LICENSES/REGISTRATIONS: • Certified Ophthalmic Technician (preferred), • Certified Ophthalmic Assistant (preferred), • Valid Driver’s License may be required based on clinic location(s). KNOWLEDGE/SKILLS/ABILITIES/TALENTS: • Team player and contributor coupled with excellent communication and interpersonal skills (oral and written)., • Skills required include use and knowledge of WORD, EXCEL and use of standard office equipment., • Ability to respond to common inquiries from customers, staff, vendors, or other members of the community., • Ability to draw valid conclusions, apply sound judgment in making decisions, and to make decisions under pressure., • Ability to interpret and apply policies and procedures., • Must address others professionally and respectfully by actions, words, and deeds., • Detail oriented, organized, process focused, problem solver, self-motivated proactive, customer service focused., • Displays independent judgment by willingness to make timely and accurate decisions based on available information that is sometimes vague or limited in nature., • Ability to multitask effectively and work in a fast paced and sometimes ambiguous environment, without compromising quality of work., • Ability to prioritize tasks and projects with limited direction, while understanding and contributing to the success of the clinic. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • This is primarily an office classification. Temperature conditions are controlled with limited direct exposure to hazardous physical substances. The noise level in the work environment is usually low to moderate., • Ability to travel to between offices., • While performing the duties of this job, the employee is regularly required to sit, stand, walk, handle, or feel, reach with hands and arms, see, talk, and hear. The employee will frequently lift and/or carry reports, records and other materials that typically weigh less than 20 pounds. The employee is occasionally required to stoop, kneel, bend, or crouch., • Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard, calculator, and other standard office equipment. All of the information contained herein reflect general details as necessary to describe the principal functions of this classification, the level of knowledge and skill typically required and the scope of responsibility but should not be considered an all-inclusive listing of work requirements. Management reserves the rights to add, modify, change, or rescind the duties and/or work assignments of all positions, without advanced notice, and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Notwithstanding any of the foregoing described job responsibilities, employee shall not engage in activities that constitute the practice of ophthalmology as prohibited under applicable law. Employee shall neither exercise control over nor interfere with the clinician-patient relationship. Clinicians shall have sole responsibility for all professional services provided to patients.

Job Description Overview: FieldLink is a network infrastructure staffing company helping people find rewarding careers in the Telecom and Low Voltage Industry. We specialize in customized staffing partnerships with industry leading integrators responsible for large commercial projects and government contracts nation-wide. We are hiring for Lead Security Technicians to join a growing team offering continued industry training and a career path. This is a contract-to-hire role. Job Responsibilities: Technical Work: • Installation of Security Systems (Cameras, Maglocks, and Card Readers)., • Installation and troubleshooting of various Access Control components such as panels, readers, strikes, mag locks, etc., • Installation and troubleshooting of IP and analog cameras and NVR's., • CCTV client software installation (PC and mobile) and configuration such as adding/deleting cameras, setting recording schedules, retrieving footage, etc., • Access Control interface experience (adding/deleting credentials, setting door schedules, configuring access levels, etc.), • IP networking (switches and routers, configuring port forwarding, etc.)., • Testing of installed equipment (card readers, cameras, alarm points, etc.)., • Programming and commissioning of security systems (Cameras, Access Control, Alarms)., • Installation and termination of security low voltage cabling (22/4, 20/4, CAT 5/E, CAT 6)., • Termination of CAT 5/E and CAT 6., • Dress and route cable from IT closets to device locations (Cameras, Maglocks, Card Readers)., • Build out Security equipment racks., • Cable pathway installation (J-hooks, D-rings)., • Cable management (dressing and labeling)., • Utilize computer programs including word processing, spreadsheets, and databases; CCTV and access control systems; media storage., • Read and follow blueprints set for installation., • Must be able to teach/train end user (the Customer) on how to use the system upon completion of the installation., • Follow written and oral communication displaying professionalism with colleagues and management., • Manage teams to effectively complete large-scale commercial projects., • GC/Client management experience., • Conduct safety meetings., • Order appropriate materials as necessary, • Necessary Labor Forecasting., • High School Diploma or GED equivalency., • 5+ years of commercial Security installation., • 5+ years of Access Control installation., • 3+ years of IP addressing and troubleshooting., • Programming and Commissioning of Security Systems (Lenel, Genetec, Software House, Avigilon, CCURE9000), • Security Manufacturer/Product Certifications., • Must be proficient with Microsoft Office (Word, Excel, Outlook)., • Active OSHA 10 – preferred., • Scissor/Boom Lift Certification – preferred., • Physical Requirement: Must be able to work on a ladder and/or scissor lift, in confined spaces, lift up to 50 pounds, and move up to 75 pounds. Ability to work on your feet for entire shift., • Tools: Basic Hand Tools: screwdriver (multi-Bit), tape measure, snips, pliers (needle nose and channel locks), punch down tool, flashlight, work boots (steel toe or composite toe) gloves and tool pouch.Company DescriptionFieldLink is a network infrastructure staffing company helping people find rewarding careers in the Telecom and Low Voltage Industry. We specialize in customized staffing partnerships with industry leading integrators responsible for large commercial projects and government contracts nation-wide.FieldLink is a network infrastructure staffing company helping people find rewarding careers in the Telecom and Low Voltage Industry. We specialize in customized staffing partnerships with industry leading integrators responsible for large commercial projects and government contracts nation-wide.