Trabajos construction engineer en Orange, New JerseyCrear alertas

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is part-time position in Clifton, NJ; Morning and Night shifts available (6:00 AM–6:00 PM and 6:00 PM–6:00 AM) Refrigeration (Ammonia) System operators. Responsibilities: • Maintain the Ammonia refrigeration and other freon based cooling systems including, but not limited to operation, maintenance, and repairs., • Maintain and operate single, two stage, cascade ammonia systems and subsystems, • Monitor and identify abnormal operating pressures, temperatures, and conditions within the refrigeration system, adjust, repairs and/or schedule service as required, • Thoroughly understanding and able to handle refrigeration system components, including vacuum pumps, chillers, evaporators, condensers, compressors, controls, and valves etc., • Perform and delegate to daily, weekly, monthly, annually inspections, and preventative maintenance on the refrigeration equipment and other cooler machinery on and off-site as needed, • Perform other maintenance duties such as plumbing, replacing valves, installing fixtures, detecting, and repairing leaks as needed, • Handle hazardous materials as directed and follow guidance of OSHA and EPA, • Monitor and record all system readings to document operation of the equipment and the system and provide reports and troubleshooting, • Respond to emergency breakdowns of the refrigeration systems, • Procure quotations and bids for the order of work scopes, repairs, parts, and construction projects as needed, • Ensure continuous training and competency of refrigeration updates and standards, • Train personnel for routine check and system following the SOP, • Thoroughly understand and can act upon based on EAP and technical guidance during emergency and system malfunction situations, • Handle unscheduled and emergency shut down of equipment, • Ensure all refrigeration equipment is functioning in a safe and optimal manner, • Ensures continuous operation of all the facility utility systems and supports preventative maintenance programs., • Assists in the record-keeping and training requirements for all components of the Ammonia refrigeration system in compliance with State and federal guidelines., • Must perform duties as assigned by the facility Manager. & Chief Engineer Qualifications Must posses a Blue SealToxic To Operating license issued by the state of New Jersey • 5+ of Ammonia and freon based refrigeration experience, • 4+ years of active experience with cooling processes, ammonia refrigeration, and other freon based facilities within a produce and food processing and storage facility is a plus, • Experience with screw and reciprocating compressors, recirculation pumps, HVAC units, air compressors, and associated control systems, • Work experience in ammonia system pump-downs and repairs, • Knowledge of chemical testing for cooling towers and ammonia system preferred, • Strong electrical and mechanical troubleshooting skills, • Ability to understand refrigeration blueprints, P&ID, and cut sheets, • Hazmat Responder Certification preferred, • Trained and experienced in lock-out, tag-out, and safe work practices, • Must be able to respond to emergencies if needed 24/7 including after hours and weekends., • Best-practice and professional knowledge of industrial maintenance and standards, • Able to perform in a fast-paced environment, • Must be detailed-oriented, cost-conscious, and deadline sensitive Physical requirements • Able to climb stairs and ladders and fall-protection trained, • Able to work at variable heights, • Able to lift, push, and pull 50 lbs. in weight Environmental conditions • Roof height and outdoors; cold, wet, and cold storage temperatures Compensation Range • The US base hourly range for this full-time position is $37/hr - $43/hr, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers #INDWH Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Position Title: Project Manager Location: Morristown, New Jersey, United States Description: We are offering an exciting opportunity for a Project Manager to join our Morristown, NJ office. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you'll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Manage the project delivery for medium value or moderately complex projects, • Manage the project plan and resource requests, • Provide overall supervision and tracking of the project deliverable and finances, • Ensure project activities and submissions adhere to the Quality Management Plan, • Ensure the project activities and submissions adhere to the firm technical policies, • Responsible for supervision of the project team, • Participate in proposals for opportunity pursuits in development of management approach and cost, • Prepare scope, schedule and budget for projects, • Foster Teamwork through identification of project assignments for work-sharing, • Coordinate with other business units through project assignment work sharing, • Attend project meetings to present specific aspects of work assignments, • Routinely interact with clients and stakeholders Requirements: • BS in Civil Engineering required, • PE License required (preferably in NJ), • A minimum of twelve years of Engineering experience with a focus on design, • Past experience as a Project Manager, Project Engineer, Deputy Project Manager or Design Manager, • Experience with local client base such as NJDOT, NJTA, • Ability to work effectively as part of a design team, • Excellent verbal and written communication skills Benefits: We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS PIa75b3f23ae0a-38003-39609844

Senior Water Resources Engineer US-NJ-Edison Job ID: 2026-3300 of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We have an immediate need for a Senior Water Resources Engineer for our Edison, NJ office. We are seeking a Senior Water Resources Engineer to play a key role in expanding and strengthening our transportation and infrastructure practice in our Edison, NJ office. This position offers the opportunity to help build and lead our in-house water resources capabilities in support of bridge, roadway, and resiliency-focused projects throughout NJ and NY, particularly for NJDOT, NJTA, NYSDOT, and NYSDEC clients. This is a strategic growth position. We are looking for an experienced Water Resource professional who is interested in helping shape a scalable practice — leading technical efforts, supporting pursuits, mentoring staff, and integrating hydraulic design with structural and civil engineering disciplines. The successful candidate will collaborate closely with bridge and roadway engineers to deliver integrated, permit-ready, and constructible solutions from planning and concept development through final design and construction. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Lead hydrologic and hydraulic (H&H) analyses for bridge, culvert, and roadway projects, • Perform watershed modeling, rainfall-runoff modeling, and peak flow analysis using HEC-HMS, HydroCAD, or similar tools, • Develop and review HEC-RAS models (1D and/or 2D) for floodplain and open channel analysis, • Conduct bridge hydraulic evaluations, including scour analysis, waterway adequacy studies, and overtopping analysis, • Evaluate flood risk, floodplain impacts, and resiliency strategies considering sea level rise and climate change projections, • Prepare drainage reports and supporting documentation in compliance with NJ/NY Best Management Practices (BMPs) including Stormwater Pollution Prevention Plans (SWPPP or SPPP) for NJDOT, NJDEP, NYSDOT, and NYSDEC submissions, • Support flood hazard area and floodplain permitting efforts, • Coordinate closely with structural and civil engineers to align hydraulic modeling with bridge sizing, roadway profiles, and drainage design, • Lead drainage and stormwater management system design including storm sewer networks, culverts, detention/retention basins, green infrastructure, and outfall structures, • Participate in site visits and field investigations to document hydraulic conditions, • Provide technical support during construction administration, • Contribute to proposal efforts, qualifications packages, and business development initiatives to strengthen the firm’s H&H resume Qualifications • Bachelor of Science in Civil Engineering (Water Resources or related focus preferred), • 8–25 years of relevant water resource experience, including DOT project exposure, • NJ PE required; NY PE strongly preferred or ability to obtain, • Demonstrated experience with NJDOT, NJDEP, NYSDOT, and/or NYSDEC standards and permitting processes. Specifically experience in NJDEP Flood Hazard Control Act and Stormwater Management Regulations., • Proficiency with HEC-RAS required; experience with HEC-HMS, HydroCAD, PondPack and/or StormCAD preferred, • Bridge hydraulic and scour analysis experience required, • Experience preparing technical hydraulic reports for agency review, • Working knowledge of drainage system design and stormwater management, • Ability to manage multiple assignments, mentor junior staff and work as part of a team., • Strong written and verbal communication skills Growth Opportunity This position is part of a strategic initiative to expand our multidisciplinary transportation capabilities. The selected candidate will have the opportunity to help define modeling standards, guide technical quality, mentor junior engineers, and build a sustainable H&H practice within a collaborative environment. We are seeking a professional motivated to take ownership and contribute to the long-term development of the practice while delivering high-quality, defensible hydraulic solutions for public infrastructure projects. Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $140,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at _ LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 140000-170000 Yearly Salary PI591e4f4e91d0-38003-40102847

Senior Mechanical Engineer US-NJ-Edison Job ID: 2026-3254 of Openings: 1 Category: MEP LiRo-Hill Overview We have an immediate need for a Sr. Mechanical Engineer for our Edison, NJ location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities In this role, you will lead the design and development of HVAC systems for commercial, industrial, municipal, and healthcare facilities. Additional responsibilities will include: • Lead the design and development of HVAC systems for commercial, industrial, municipal and healthcare facilities., • Perform load calculations, energy modeling, and system sizing using industry-standard software., • Prepare detailed mechanical drawings, specifications, details and controls diagrams., • Coordinate with multidisciplinary teams including architects, structural engineers, and other stakeholders., • Conduct site visits, field inspections, and construction administration including review of shop drawings, RFIs etc., • Mentor junior engineers and provide technical guidance., • Perform QA/QC reviews of projects to ensure high standards of quality are maintained., • Ensure compliance with local codes, standards and client requirements., • Interface with clients, attend project meetings, and present technical solutions., • Participate in project sales proposals and interviews., • Conduct site assessments and generate comprehensive technical reports. Qualifications • Bachelor’s degree in Mechanical Engineering, • Professional Engineer (PE) license required, • Minimum of 10 years of relevant experience in HVAC design, • Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.g., Trane Trace, HAP), • Strong knowledge of mechanical codes, energy efficiency standards, and sustainable design practices, • Excellent leadership, mentoring and project management skills, • Strong technical writing and communication skills, • Certifications or Licenses (if required): PE License, NY, NJ We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $150,000: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 150000-170000 Yearly Salary PI34ee6458bb1b-38003-39462574

Senior Bridge Structural Engineer US-NJ-Edison Job ID: 2026-3253 of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We have an immediate need for a Senior Bridge Structural Engineer to join our growing team in our Edison, NJ office. This position is focused on bridge and transportation structural projects for New Jersey agency clients, with an emphasis on NJDOT, NJTA, PANYNJ, NJ TRANSIT, county, and municipal work. The successful candidate will work closely with our recently hired bridge leadership in New Jersey and will play a key technical role in project delivery, client coordination, and the continued growth of LiRo-Hill’s bridge and transportation structural practice in the region. This is an excellent opportunity for a senior engineer, associate, or senior associate-level candidate who brings strong NJ agency experience and wants to help build a high-performing local bridge/structures team within a collaborative, multidisciplinary firm. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Perform structural engineering analysis and design for bridge and transportation-related structures, including rehabilitation, replacement, preservation, and load rating assignments, • Serve as a senior technical resource for NJ agency work, with a strong working knowledge of NJDOT standards and familiarity with NJTA, PANYNJ, NJ TRANSIT, county, and municipal requirements, • Serve as lead designer or task lead on bridge structural assignments, including simple to moderately complex projects, • Support project managers and senior leadership with scope, schedule, budget, client coordination, and technical delivery, • Assist in site investigations to document existing conditions, including bridge inspection and condition assessment, • Complete and review design calculations; assist in the preparation of drawings, specifications, estimates, and technical reports, • Provide responses and solutions to issues during the construction administration phase of projects, • Coordinate work product with multidisciplinary and multi-office teams across civil, structural, architecture, MEP, and construction management, • Mentor junior staff and help strengthen LiRo-Hill’s local bridge/structures capabilities in New Jersey Qualifications • Bachelor of Science in Civil or Structural Engineering; Master’s degree preferred, • 10-15 years of related structural engineering experience, with a focus on bridge and transportation infrastructure, • NJ PE required; NY PE or additional licensure is a plus, • Strong experience with NJDOT standards required; NJTA, PANYNJ, NJ TRANSIT, county, municipal, NYCDOT, or NYSDOT experience is a plus, • Experience in bridge design, rehabilitation, inspection, load ratings, and preparation of contract documents, • Bridge inspection experience and certification is a plus, • Understanding and application of applicable bridge design codes, agency standards, and structural engineering requirements, • Experience using structural analysis and design software, • Ability to manage multiple tasks, coordinate with internal and external teams, and meet deadlines, • Strong written and verbal communication skills, with the ability to interface with clients and agency reviewers, • AutoCAD experience required; MicroStation, OpenBridge, or Revit experience is a plus Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $145,000; Maximum: $175,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role., • Please visit our website for all of our career opportunities at _ LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 145000-175000 Yearly Salary PI0b13532f33ea-38003-39453240

Company Overview: Founded in 1960, RW Dake Construction is an employee-owned specialty general contractor with 12 regional offices across New York, New Jersey, New England, Maryland, North Carolina, Florida and Texas. For more than 65 years, RW Dake Construction has delivered the experience, quality, and safety our clients depend on. Through expert craftsmanship, attention to detail, and a customer-first approach, we have built a reputation as a trusted construction partner across a wide range of industries, including banking, corporate, retail, and healthcare construction. As an Employee Stock Ownership Plan (ESOP) company, every employee has the opportunity to share in the success they help create. Overview: The Safety Engineer supports safe, compliant job sites by conducting inspections, identifying hazards, supporting safety training, and partnering with project and field teams to address safety concerns. Responsibilities: • Perform job site safety inspections across the tri-state area, • Help administer safety trainings to office and field staff, • Confirm completion of the daily THA’s, • Assist project managers with development of site-specific safety plans, • Maintain 30-hour OSHA card, • Participate in periodic safety audit(s), • Stop work when a safety issue arises that causes imminent danger. Notification to Safety Management Team and Regional Management immediately, • Communicate improvement areas to safety program to Safety Management on a regular or needed basis; best practices, new technology, changing site conditions, etc., • Identify hazardous work conditions and develop steps to mitigate them, • Advise and coach field supervision on site specific safety concerns and upcoming work., • Potentially assist in new hire safety trainings, • Attend job meetings with clients, contractors, and subcontractors for review of safety concerns, • Assure that all equipment meets current standards; inspection tags, annual inspections by independent companies, equipment being used is within date range of service date, etc., • Encouraged to continue further education in the overall safety landscape., • Develop partnership with project managers and field personnel and become a trusted advisor on all safety related topics, • Follow up on all open issues discovered via inspections until each is closed out, • Investigate near misses and injuries and timely report to Safety Management Team., • Ensure accident reports are timely and accurately completed Required Competencies/Skills: • 0–2 years of experience in construction safety or a related field preferred., • OSHA and/or NFPA course work or certifications preferred, • Must be able to lift and carry or otherwise move up to 25 pounds regularly/occasionally. Sedentary work. Repetitive motion. Substantial movements (motions) of the wrists, hands, and or fingers, • Minimum of an associate degree in a related field preferred, • Construction Union background desired Why Join RW Dake Construction? • Employee-Owned Company (ESOP), • 100% Company-Paid Health, Dental & Vision Insurance for Employees and Families, • Paid Time Off, • Career Growth Opportunities, • Collaborative Team Environment, • Opportunity to Make a Direct Impact on Company Success Submissions from third-party recruiters will not be considered and will be treated as direct applicants.

Job DescriptionStaff Engineer – Geotechnical Hackettstown, Wall or Newark, NJ, US French & Parrello Associates (FPA) is seeking a motivated and talented Staff Engineer to join our growing Geotechnical Department in Hackettstown, Wall or Newark, NJ. This is an exciting opportunity for an entry-level engineering professional who wants to develop expertise in soil mechanics and foundation engineering, support diverse projects, and build a long-term career with one of the Northeast’s fastest-growing engineering consulting firms. Recognized year after year as one of NJBIZ’s Best Places to Work in New Jersey, FPA is committed to creating a culture where talented professionals are empowered to grow, collaborate, and succeed. In 2026, FPA was ranked #49 on Zweig’s Hot Firm List, recognizing the firm among the 100 fastest-growing AEC firms in the United States and Canada. Our continued growth is driven by our investment in our people, technical excellence, and commitment to delivering innovative solutions for the communities we serve. Responsibilities • Assist in planning and executing geotechnical field investigations, including soil borings, test pits, and site reconnaissance., • Log soil and rock samples in accordance with industry standards., • Coordinate laboratory testing of soil and rock materials and review results., • Perform basic geotechnical analyses under the supervision of senior engineers., • Support the preparation of geotechnical reports, including recommendations for foundations, earthwork, and site development., • Assist with construction observation and field inspections as needed., • Collaborate with other engineering disciplines on multi-disciplinary projects., • Maintain accurate field notes, data records, and project documentation., • Adhere to company safety standards and protocols during field activities. Qualifications • Bachelor’s degree in Civil Engineering or related field required., • Engineer-in-Training (EIT) certification or ability to obtain within 6 months., • Strong understanding of soil mechanics and foundation engineering principles., • Excellent written and verbal communication skills., • Proficiency in Microsoft Office; familiarity with geotechnical software is a plus., • Ability to work both independently and as part of a team., • Willingness to perform fieldwork, including working outdoors in varying conditions., • Master’s degree in Geotechnical Engineering; Preferred but not required. Additional Information • Sponsorship for U.S. employment authorization is not available for this position., • Relocation assistance is not available for this position. Don't meet every qualification? At FPA, we recognize that great candidates bring diverse experiences and perspectives. If you are excited about this opportunity but do not meet every listed requirement, we encourage you to apply. Your experience may be exactly what we need for this role or another opportunity within our growing team. The FPA Difference Large firms offer scale. FPA offers opportunity. For more than 50 years, French & Parrello Associates (FPA) has been delivering innovative engineering solutions that shape communities, improve infrastructure, and support regional growth. As an employee-owned, mid-sized engineering and consulting firm, FPA combines the technical capabilities and expertise of a larger organization with the collaboration, accessibility, and personal investment of a close-knit team. At FPA, engineers are empowered to take ownership of their work, collaborate across disciplines, and experience the full project lifecycle. Your career is not defined by one task or limited to one area of expertise. Instead, you will have the opportunity to strengthen your technical skills, work alongside experienced professionals, contribute to meaningful infrastructure projects, and develop the experience needed to grow into future engineering leadership roles. Our multidisciplinary approach allows team members to see the bigger picture, collaborate with experts across multiple disciplines, and understand how their work impacts the communities we serve. We invest in our people through mentorship, professional development, and opportunities for advancement because we believe the success of our employees drives the continued success of our firm. At FPA, you are not just designing infrastructure, you are helping build a growing organization while contributing to projects that make a lasting impact. Benefits Benefit packages for this role will start on the 1st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement plans. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law. Compensation The projected compensation range for this position is $70,000 to $77,000. Actual compensation will depend on factors including experience, education, qualifications, and skill set. FPA recognizes and rewards performance through an annual bonus program.

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. What You'll Do: CoreWeave is scaling a portfolio of mission-critical data center infrastructure to support the performance, reliability, and speed required for AI and high-performance computing workloads. Our teams partner across design, construction, commissioning, networking, and operations to bring new capacity online safely and at scale. The Principal Operational Readiness Engineer will serve as a senior technical leader responsible for stabilizing and driving execution of complex data center projects across CoreWeave's infrastructure portfolio. About the role: This role is focused on design compliance, operational readiness, and cross-functional coordination across all phases of design, construction, commissioning, fit-out, and operational handoff. The Principal Operational Readiness Engineer will perform deep operational and technical reviews of projects to identify gaps in process execution, design validation, construction coordination, turnover readiness, and quality assurance practices. You will evaluate whether critical infrastructure systems, construction activities, commissioning efforts, and operational handoff procedures are being executed in accordance with project requirements, standards, and best practices. This individual must be comfortable rapidly assessing current-state execution, identifying risk, and driving actionable mitigation and recovery plans to resolution. In this role, you will: • Perform deep operational and technical reviews of active projects to identify gaps in design validation, process execution, construction coordination, turnover readiness, and quality assurance., • Assess whether critical infrastructure systems, construction activities, commissioning efforts, and operational handoff procedures are being executed in accordance with project requirements, standards, and best practices., • Identify deficiencies, breakdowns in coordination, incomplete validations, and missing controls that could impact schedule, reliability, scalability, or operational readiness., • Develop and drive corrective action, mitigation, and recovery plans through resolution for distressed or high-risk infrastructure projects., • Partner closely with Design, Construction, Operations, Network Engineering, Commissioning, and external contractors to improve coordination, strengthen execution discipline, and ensure projects are delivered to CoreWeave's operational and technical standards., • Review project documentation including construction drawings, MEP designs, RFIs, submittals, schedules, turnover packages, and change orders to validate project readiness and execution quality. Monitor project dependencies, sequencing, and critical path risks across large-scale data center build and fit-out programs. • Support the successful turnover of projects into operations by validating readiness, identifying gaps, and driving issue resolution before handoff.Who You Are:, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Construction Management, or a related technical discipline. 15+ years of experience in data center design, construction, commissioning, or operational readiness within mission-critical environments. • Strong technical understanding of mechanical and electrical infrastructure systems including power distribution, cooling systems, controls, generators, UPS systems, and critical plant operations. Proven experience managing distressed or high-risk infrastructure projects and driving corrective action plans to successful completion. • Demonstrated ability to rapidly assess active project sites, identify execution risks, and develop mitigation and recovery strategies., • Deep knowledge of construction sequencing, scheduling, turnover planning, and fit-out coordination for large-scale data center projects., • Demonstrated experience coordinating across design teams, general contractors, commissioning agents, vendors, and operations organizations., • Strong understanding of project scheduling methodologies, construction dependencies, and critical path management. Experience reviewing and interpreting construction drawings, MEP designs, RFIs, submittals, and change orders. • Proficiency with project management and scheduling tools such as Primavera P6, Microsoft Project, Smartsheet, or similar platforms. Ability to lead technical issue resolution and drive decision-making across multiple stakeholder groups in dynamic project environments.Preferred: • Professional Engineer (PE), PMP, or commissioning-related certification., • Experience supporting hyperscale, HPC, or AI-focused data center environments., • Familiarity with commissioning processes, integrated systems testing (IST), and operational turnover procedures., • Experience working across global or multi-region data center deployment programs., • Knowledge of industry standards including Uptime Institute, NFPA, ASHRAE, and IEEE. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love stepping into complex projects and bringing structure to chaotic environments., • You're curious about improving operational readiness and infrastructure delivery at scale., • You're an expert in mission-critical infrastructure systems, construction coordination, and project recovery execution.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $198,000 to $264,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description RVE (an Ardurra company) is seeking a Construction Observer NICET II/III to join our team in Cherry Hill, Morganville and/or Secaucus NJ. Infrastructure and transportation projects have a tremendous impact on the local economy, directly affect the daily lives of end users and improve area safety. RVE has longstanding relationships with several infrastructure and transportation entities; we provide numerous clients with Engineer of Record, Program Manager and extension of staff services. Our professionals provide bridge engineering design and condition inspection services; a complete range of highway-related services ranges from full-design and layout, resurfacing to full reconstruction; and comprehensive professional traffic engineering services. Our highly qualified multi-disciplined design and construction management team consists of more than 60 professionals including registered professional engineers, NICET certified resident engineers and staff with specialized certification from ACI, NACE, and NECEPT among others. Primary Function: This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. The ideal candidate will have approximately 5 to 15 years of experience in heavy highway construction projects. Primary Duties: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. Education and Experience Requirements: • High school diploma or equivalent, • NICET II Highway Construction or equivalent required, • ACI-Concrete Field Testing, • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products. Compensation is based on experience, qualifications, and other job-related factors. The expected hourly range for this position is $30.00 to $46.00 hourly. The firm also offers a comprehensive benefits package, including medical, dental, and vision insurance, paid time off, paid holidays, and a 401(k) retirement savings plan. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KS2

Job Description Overview ALRA Engineers, P.C. is a full-service SBE/DBE/MBE engineering firm dedicated to providing consulting services in Construction Management, Construction Inspection, Civil, Electrical, and Mechanical Engineering. We are seeking a motivated and detail-oriented Construction Inspector to join our growing team. The successful candidate will provide construction inspection services on roadways, bridges and or municipal infrastructure projects throughout Nassau County and Suffolk County New York. As the Construction Inspector will ensure that projects are constructed in accordance with contract plans, specifications, applicable codes, and client requirements while maintaining quality, safety, and schedule expectations. Locations · Nassau County and Suffolk County New York Responsibilities · Reads and interprets construction plans, drawings, and specifications. · Prepares contract administration documentation, including daily reports, work narratives, special inspection reports, and daily time and material. · Prepares written documentation for unit price work and quantity tracking. · Identifies potential extra work issues and advises the Resident Engineer of potential impacts or concerns. • Compiles, supporting documentation, and preparing related sketches as required., • Reviews plans for constructability and prepares technical comments or recommendations., • Reviews contractor payment requests and provides comments and recommendations to the Resident Engineer as required., • Maintains complete daily documentation of construction activities, including photographic records., • Verity compliance with OSHA safety requirements and project safety standards., • Attend construction meetings and provide project updates. Qualifications • Ability to become familiar with contract requirements, site conditions, and special provisions, including all applicable standards, requirements, and specifications., • Knowledge and understanding of agency and company policies, procedures, and Infrastructure’s Standard Construction Operating Procedures (SCOPs)., • Organized and detail-oriented, with the ability to maintain accuracy while managing multiple priorities and requests., • Proficiently in Microsoft Office and related project documentation software., • Ability to work a flexible schedule, including nights, weekends, and extended hours as required by project needs., • Valid driver’s license is required. Education and/or Experience • Bachelor’s degree in civil engineering or related education is preferred., • Minimum of two (2) years of experience in construction inspection and construction management for infrastructure projects preferred., • Certifications from the Society of Asphalt Technologists (SAT), Traffic Control Coordinator (TCC), American Concrete Institute (ACI), and Certified Concrete Testing Technician (CCTC) are preferred but not required., • OSHA 30-Hour or 10-Hour Construction Safety, Fall Protection, Confined Space, and Permit-Required Confined Space Entry training is desired., • Various NICET certification levels will be considered, including NICET Level II, Level III, and Level IV. Physical Requirements • Ability to stand, walk, and climb for extended periods throughout the workday., • Ability to safely lift and up to 40 pounds., • Ability to work outdoors in varying weather conditions, including heat, cold, rain, and wind., • Ability to safely traverse active construction sites, including uneven terrain, excavations, and temporary structures, while wearing required personal protective equipment (PPE)., • Ability to climb ladders, navigate stairs, and access construction work areas as needed., • Ability to perform field inspections requiring bending, kneeling, crouching, and reaching., • Ability to operate a motor vehicle and travel to project sites throughout Central and Southern New Jersey., • Ability to visually inspect construction work and read plans, specifications, and field documentation., • Ability to wear and properly use required safety equipment, including hard hats, safety glasses, high-visibility vests, and protective footwear.\nCompany Description WE ARE PASSIONATE ABOUT OUR WORK! We are passionate when it comes to providing our clients with service and leadership that exceeds expectations. As Construction Managers and Inspectors, we have a unique opportunity to create value for our clients by pursuing what we do with passion and by exhibiting the commitment necessary to move every project forward, safely and professionally. At ALRA we focus on results and strive to create great experiences for our clients and those we partner with. Our vast sector knowledge gives us insight—a proactive ability to look ahead and solve problems before they arise. This ability helps us simplify complex tasks, ensure that the right measures are in place to gauge progress and guarantee accountability at every stage of a project. If you have ever worked around, or for people who are enthusiastic about their job, you know their passion can be infectious. ALRA is passionate about every project we undertake. WE ARE PASSIONATE ABOUT OUR WORK!\r\nWe are passionate when it comes to providing our clients with service and leadership that exceeds expectations.\r\n\r\nAs Construction Managers and Inspectors, we have a unique opportunity to create value for our clients by pursuing what we do with passion and by exhibiting the commitment necessary to move every project forward, safely and professionally. At ALRA we focus on results and strive to create great experiences for our clients and those we partner with. Our vast sector knowledge gives us insight—a proactive ability to look ahead and solve problems before they arise. This ability helps us simplify complex tasks, ensure that the right measures are in place to gauge progress and guarantee accountability at every stage of a project. If you have ever worked around, or for people who are enthusiastic about their job, you know their passion can be infectious. ALRA is passionate about every project we undertake.

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Description About the Company & Project Our client is a leading global Consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Senior Geotechnical Engineer for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Senior Geotechnical Engineer, you will play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our client's purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Assist with overseeing geotechnical subsurface investigations including preparing boring logs, conducting in-situ tests and collecting field records, • Assist with site supervision of construction activities such as pile foundation construction, ground improvement, compaction, excavation and geotechnical monitoring activities., • Monitor and document daily construction activities related to geotechnical and foundation construction efforts and preparing daily field reports, • Assist with preparation and review Geotechnical Data Reports, Geotechnical Baseline Reports, and foundation design reports, • Assist with the review of design and construction documents, including RFIs, submittals, and change orders, • Assist with performing geotechnical design for underground structures and foundations in soils and rock, • Assist with ground characterization based on the subsurface geotechnical data and preparing geotechnical subsurface profiles, • Assist with performing and reviewing geotechnical modeling of deep foundations, excavation support systems, ground improvement using commercially available geotechnical programs, • Perform slope stability and seepage analyses, • Perform liquefaction and seismic site class evaluations, • Assist with performing support of excavation design in soil and rock formations, • Assist with preparing and reviewing design calculations and engineering reports, • Participate in meetings and assist with the preparation of technical reports, • Familiarity with CADD and assist with preparing drawings Qualifications • 4-year Bachelor of Science degree in Civil Engineering with adequate course work in geotechnical engineering to demonstrate sufficient knowledge of geotechnical engineering principles, soil and rock mechanics and testing, and construction methods (a Master's degree in geotechnical engineering is preferred), • 5 -10 years of related work experience preferably in northern New Jersey/NYC area, • EIT (Engineer-in-Training) certification (a Professional Engineer registration in State of New Jersey or ability to obtain PE registration is preferred), • Familiarity with commercially available geotechnical programs for design of deep and shallow foundations, support of excavation systems and slope stability such as LPILE, GROUP, FB-MultiPier, Slope-W, Seep-W, DeepEx, Plaxis, Settle3D, etc., • Familiarity with commonly used geotechnical manuals and publications, • Familiarity with AASHTO, NJDOT and Amtrak Standards, • Good written and verbal communication skills The estimated starting salary for this position is $170k. Starting salary may vary based on permissible, non-discriminatory factors such as experience, skills and qualifications. This is an excellent opportunity for a Senior Geotechnical Engineer looking to work on the most challenging, high-profile and innovative projects. If you're an ambitious professional who thrives in a client-facing role and enjoys delivering solutions that drive project success, we encourage you to apply. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k). Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description An exciting opportunity is available for a licensed Professional Engineer (P.E.) to join a well-established multidisciplinary architecture and engineering firm in Livingston, New Jersey. This role is ideal for a technically strong Structural Engineer who enjoys working on a diverse portfolio of building projects and contributing to high-quality design solutions across multiple sectors. The successful candidate will be responsible for designing and analyzing structural systems for commercial, residential, mixed-use, healthcare, hospitality, industrial, and institutional projects. This position involves close collaboration with architects, civil engineers, MEP engineers, and project stakeholders to ensure integrated and efficient design delivery. Key responsibilities include preparing structural calculations and construction documents, reviewing drawings for code compliance, conducting site visits and field inspections, supporting construction administration activities, and providing technical mentorship to junior engineers. The role also includes involvement in project coordination, planning, and client communication. Requirements • Professional Engineer (P.E.) license required (must have), • Bachelor’s Degree in Civil Engineering with Structural focus required (Master’s preferred), • Experience in structural design of commercial, residential, institutional, and mixed-use buildings, • Strong knowledge of steel, concrete, masonry, and timber design, • Proficiency with structural analysis and design software, • Strong understanding of applicable building codes and standards, • Excellent communication, organizational, and problem-solving skills, • Ability to manage multiple projects and deadlines in a fast-paced environment, • Experience working within multidisciplinary engineering teams Benefits This is an excellent opportunity to join a respected and growing multidisciplinary firm offering long-term career development, technical leadership opportunities, and exposure to a wide variety of building projects. The role provides a collaborative work environment, strong benefits package, and the chance to contribute meaningfully to impactful architectural and engineering designs.

Job Description Young Management & Consulting (YMC) is seeking a highly experienced Senior Structural Engineer to support major capital improvement projects, structural design reviews, and engineering quality assurance initiatives for transportation and infrastructure facilities throughout New York and New Jersey. The successful candidate will possess a minimum of 12 years of structural engineering experience, including demonstrated experience serving as a Lead Structural Engineer on complex capital projects. Candidates must hold an active Professional Engineer (PE) license in New York and/or New Jersey and demonstrate extensive knowledge of New York building codes, structural design standards, and regulatory compliance requirements. This position will support the Engineering Department's Quality Assurance Division and Design Standards Unit, providing technical oversight, structural and geotechnical design reviews, and coordination across multiple engineering disciplines. The ideal candidate will have a strong background in large-scale infrastructure and transportation capital projects, preferably with previous experience supporting the Port Authority of New York and New Jersey (PANYNJ), Metropolitan Transportation Authority (MTA), airports, transit facilities, or similar public agencies. KEY RESPONSIBILITIES Structural Engineering & Technical Leadership • Serve as a senior technical resource and lead structural engineering reviewer for complex capital improvement and infrastructure projects., • Review structural and geotechnical engineering designs, calculations, drawings, specifications, and technical reports for compliance with applicable codes and standards., • Evaluate structural systems, foundations, load-bearing components, and related engineering elements for technical accuracy, safety, and constructability., • Provide engineering recommendations and technical guidance to project teams, consultants, and stakeholders., • Identify design deficiencies, potential structural concerns, and opportunities for improved engineering solutions., • Apply extensive knowledge of New York building codes, applicable structural standards, and transportation infrastructure requirements. Capital Projects & Design Review • Conduct comprehensive reviews of structural engineering documents associated with capital construction, renovation, rehabilitation, and infrastructure improvement projects., • Review Tenant Alteration Applications (TAA) and design audit submissions for compliance with applicable building codes and Port Authority technical standards., • Evaluate structural and geotechnical calculations, engineering reports, construction drawings, and specifications for completeness and regulatory compliance., • Review structural modifications to existing facilities, including foundations, steel structures, reinforced concrete systems, and building components., • Assess engineering designs for constructability, operational impacts, and integration with existing infrastructure., • Support engineering quality assurance activities throughout project design and construction phases. Code Compliance & Quality Assurance • Ensure engineering submissions comply with applicable New York State and New York City building codes, referenced structural standards, and project-specific requirements., • Review structural designs in accordance with applicable IBC, ASCE, ACI, AISC, and other relevant engineering standards., • Identify code deficiencies, design inconsistencies, and potential safety concerns., • Prepare detailed technical review comments, engineering assessments, and recommendations for corrective action., • Coordinate with architects, engineers of record, consultants, and project stakeholders to resolve design and compliance issues., • Support consistent application of engineering standards and quality assurance procedures. Project Coordination & Stakeholder Management • Act as a technical liaison between Port Authority facilities, tenants, consultants, engineering reviewers, and project management teams., • Coordinate multidisciplinary reviews involving structural, geotechnical, architectural, mechanical, electrical, and other engineering disciplines., • Participate in design review meetings and technical discussions with Architects and Engineers of Record., • Consolidate technical comments and prepare formal memoranda documenting review findings and required revisions., • Monitor design review progress, track outstanding issues, and support timely resolution of engineering concerns., • Communicate effectively with internal leadership, external consultants, contractors, and public agency representatives. Documentation & Reporting • Review, process, and maintain electronic engineering submissions and technical documentation., • Prepare engineering review reports, technical memoranda, and correspondence., • Maintain accurate records of design comments, approvals, outstanding deficiencies, and project status., • Utilize Microsoft Office, SharePoint, Trimble, e-Builder, and other project management or document control platforms., • Support continuous improvement of engineering review processes and documentation standards. REQUIRED QUALIFICATIONS Education & Professional Licensing • Bachelor's degree in Civil Engineering, Structural Engineering, or a closely related engineering discipline from an accredited institution., • Active Professional Engineer (PE) license in New York and/or New Jersey is required., • Advanced degree in Structural Engineering is preferred. Professional Experience • Minimum of 12 years of progressive structural engineering experience, preferably involving complex buildings, transportation infrastructure, or major capital improvement projects., • Demonstrated experience serving as a Lead Structural Engineer, Senior Structural Engineer, or Structural Engineering Technical Lead., • Proven experience reviewing, evaluating, and coordinating structural engineering designs for major capital projects., • Extensive knowledge of New York building codes, structural design requirements, and applicable engineering standards., • Experience with structural and geotechnical engineering systems, including foundations, steel structures, concrete structures, and existing building modifications., • Strong understanding of engineering quality assurance, design review processes, and construction documentation., • Experience working with multidisciplinary engineering teams, consultants, contractors, and project stakeholders., • Ability to independently assess complex structural engineering issues and provide sound technical recommendations. PREFERRED QUALIFICATIONS • Previous engineering experience with the Port Authority of New York and New Jersey (PANYNJ)., • Experience supporting MTA, airport authorities, transit agencies, or other major transportation infrastructure organizations., • Direct involvement in large-scale public infrastructure or transportation capital improvement programs., • Experience with airport terminals, transit stations, transportation facilities, bridges, or other complex infrastructure., • Familiarity with Port Authority design standards, Tenant Alteration Applications (TAA), and design audit procedures., • Experience reviewing structural designs for existing facilities undergoing renovation, expansion, or modernization., • Experience coordinating engineering reviews across multiple technical disciplines., • Familiarity with public agency engineering approval processes, capital project delivery, and regulatory requirements., • Proficiency with engineering software such as AutoCAD, Revit, STAAD.Pro, SAP2000, ETABS, or similar structural analysis and design applications. IDEAL CANDIDATE The ideal candidate is an accomplished Structural Engineer with 12–20+ years of experience, a strong technical foundation, and a proven history of leading structural engineering activities on major capital projects. This individual has successfully served as a Lead Structural Engineer, possesses an active NY or NJ PE license, and has extensive experience navigating New York building codes and complex engineering review processes. We are particularly interested in candidates who have worked directly with Port Authority facilities, major airports, MTA projects, or other transportation infrastructure programs. The successful candidate will demonstrate the ability to independently evaluate complex structural designs, identify technical deficiencies, communicate effectively with multidisciplinary teams, and provide sound engineering recommendations. Strong leadership, attention to detail, sound engineering judgment, and the ability to work collaboratively with public agencies and project stakeholders are essential.

Job DescriptionSummary: The engineer in this position should have a wealth of experience engineering/installing datacenter equipment. The engineer will typically take on the more complex work and pull all aspects of a job together into a cohesive package. This would include the complete engineering of data centers including, but not limited to, infrastructure, overhead and underfloor racking, cabinets, network and server equipment, cable distribution, power (AC or DC), Cold Aisle Containment solutions, etc. Qualifications: High School diploma is necessary. Some college or technical school a plus. At least 3 years engineering experience or equivalent field experience in a data center environment BICSI certifications a plus An advanced understanding of various software packages including MS Word, spreadsheet/database programs such as MS Excel, MS Access Ability to quickly learn customer engineering databases and software. Must be able to handle multiple tasks and priorities and must be able to consistently work under and meet strict deadlines. Must possess good leadership, verbal, and written communication skills. Ability to read, analyze, and interpret the most complex of documents, including technical specifications, white papers, data center drawings and documents. Ability to write reports, business correspondence, and procedure manuals. Ability to write engineering specifications. Responsibilities: • work independently on deadline sensitive jobs or projects with little direction, • read and understand site survey data, able to think through the information presented and quickly put together a bill of material with little guidance., • schedule, perform, and write-up site surveys when necessary, • develop Bill of Materials and Firm Price Quotes, • write complex data center specific engineering specifications which will include in, • fix engineering problems and mistakes. Understands change order procedures and material billing issues., • Manage several engineering projects simultaneously, • proficient with updating customer drawings and databases, • takes an active role in teaching detail engineer procedures and philosophies of engineering., • regularly interfaces with customer representatives (field engineers, data center managers, data center technicians, local construction contractors, etc., • Should be at level where can solve customer problems issues with limited guidance, • interface with "internal customers” such as field engineers, installation supervisors, lead installers, and installation techs. Guides detail engineer through problems and situations with "internal customers”, • fully understand format and structure of an engineering specification., • working knowledge of equipment drawings, T-BASD drawings, and material spec sheets and white papers. Also has ability to seek out information not readily available, • fully adept at drafting and updating customer drawings and using drafting programs such as VISIO and AUTOCAD, • often will initiate site visits and site surveys. Visit site when necessary to solve problems, • able to engineer jobs using a full understanding of customer quality documents such as Installation Practices, Engineering Practices, BICSI standard documents, etc..., • Performs other related duties as assigned by management. Engineering Skills and Reasoning Ability: • Ability to logically think through the process of telecommunication installation and engineering., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical specifications in order to translate such information into a detailed engineering spec. Ability to apply principles of logic to a wide range of intellectual, technical, and practical problems., • Ability to use common engineering tools effectively such as a tape measure, calculator, power lead calculator, etc.Physical Demands:, • The employee will be required to use his/her hands 90% of the time to type, write, and handle paperwork., • The employee will be sitting at a desk 80% of the time with walking between offices and other work areas from time to time. At times, employee is required to make customer visits to resolve problems or provide customer service., • The employee may, from time to time, be required to lift weight (i.e., paper boxes) up to 15 pounds., • Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer and working with files & paperwork.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Title: Intermediate Mechanical Engineer | Commercial, Retail, Residential and Industrial buildings Client: One of New Jersey's preeminent Architectural and Engineering firms which has grown into a full-service Design firm that provides a single point of accountability for all aspects of design services. The firm's size and abilities enable it to handle a broad spectrum of projects while allowing the principals to put their seal on everyone. With in-house Civil, Structural, Mechanical, Electrical, Plumbing and Fire Protection Engineering, all aspects of a project can be designed and managed by one firm. Description: Urgent need for an Intermediate-level Mechanical Engineer to design and prepare specifications for HVAC systems and other building related mechanical equipment. Should have experience with commercial, multi-family, mixed-use and residential design. Requirements: • 4-7 years of experience developing designs and preparing specifications of HVAC systems and other building related mechanical equipment (plumbing, sprinklers, etc.), • Prepare markups and changes for HVAC equipment., • Assist in obtaining equipment specifications from equipment vendors., • Attending meetings, preparing meeting minutes, conducting site visits, and field inspections as required., • Prepare all construction drawings and reports., • Proficient with AutoCAD and/or Revit MEPEducation: BS Mechanical Engineering To Apply: If you have the knowledge, skills, and experience for this role, please attach your resume using our email at recruiters@careerpointstaffing.com . To Refer-a-Friend: Join our Refer-a-Friend Program Increase in salaries: We have a proven track record of negotiating above-market salaries for our permanent placements Recruiters: Josh Rabbani, josh@careerpointstaffing.com Bob Giangrasso, bob@careerpointstaffing.com Kirty Rajput, kirty@careerpointstaffing.com

Job Description Break away from your silo to grow your career while working on high profile projects like mission critical data centers, academic, casinos, hotels, museums and labs. We offer growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as a Senior Electrical Engineer at our Newark, NJ office (Hybrid schedule - next to the train station) Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. Responsibilities: • Lead project engineer on a variety of projects from new construction to renovations through all phases from conceptual design to construction., • Design of power distribution, lighting, emergency and standby power supply, • Develop specifications, legends, site plans, lighting plans, power plans, one-lines, riser diagrams, details as well as load calculations., • Perform quality control reviews at various stages of design., • Lead the project electrical team of engineers and designers and provide technical guidance in the development of the construction documents, • Perform Construction Administration tasks such as field visits and subsequent issuance of field reports, responding to RFIs and reviewing shop drawings. Requirements: • 10+ years of related experience, • Bachelor’s degree in electrical engineering or equivalent experience, • Revit knowledge is a plus., • SKM, AGI 32 and AMPCALC are a plus, • PE license is a plus Flexible & Hybrid Culture Compensation range is $140,000 - $165,000 plus yearly bonus dependent on years of experience, licensure, education, and project portfolio. We know that work/life integration is important to our employees. Our hybrid work style (2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com.

Job Description Title: Intermediate Structural Engineer | Commercial, Residential, Mixed-use, and Retail Client: One of New Jersey's preeminent Architectural and Engineering firms which has grown into a full-service Design firm that provides a single point of accountability for all aspects of design services. The firm's size and abilities enable it to handle a broad spectrum of projects while allowing the principals to put their seal on everyone. With in-house Civil, Structural, Mechanical, Electrical, Plumbing and Fire Protection Engineering, all aspects of a project can be designed and managed by one firm. The staff is a dedicated, talented team of registered Architects, Professional Engineers and technical support personnel who share the firm's ideals with every client; a quest for upholding the highest standards of quality and pride in the integrity of the work designed. Description: At this time, our client has an immediate opening in their Structural Department for a Senior Structural Engineer, with experience in steel, concrete as well as wood frame. They are in a growth mode and are seeking quality talent. Immediate need for an engineer with 7 or more years of experience and skills as noted below. Responsibilities: • Develop construction documents including plans and details for building structures, • Prepare calculations for steel, wood, concrete, and masonry structures, • Coordinate with architecture and other engineering disciplines, • Interact with clients to discuss project requirements, • Visit sites as necessary and prepare field reportsRequirements:, • Minimum 4+ years of Structural Engineering experience, • PE License desired but NOT required (it would be beneficial if someone was on track to get a license), • Proven experience desired designing structural systems for commercial, residential, industrial buildings, multi-family dwellings, daycare centers, and retail, • Must have expertise in designing steel, wood frames, and concrete buildings, • Familiarity with current IBC and ASCE 7 codes desired, • AutoCAD a MUST; Revit desired, • Good written and Verbal skills for report preparation and client interactionEducation: Bachelor's Degree in Civil/Structural Engineering, with an emphasis on Structural Design from an accredited school of Engineering Increase in salaries: We have a proven track record of negotiating above-market salaries for our permanent placements and hourly rates. Recruiters: Josh Rabbani, josh@careerpointstaffing.com Bob Giangrasso, bob@careerpointstaffing.com Kirty Rajput, kirty@careerpointstaffing.com

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Design Engineer – Stormwater Management Location: Greater Newark area Work Arrangement: On-site / Hybrid Potential Position Overview Our client, an established company specializing in innovative stormwater management and water quality solutions, is seeking a Design Engineer to join its engineering team in Greater Newark area. This position offers an excellent opportunity for an engineer with experience in stormwater quality design, regulatory compliance, and civil infrastructure projects. The successful candidate will support the design and implementation of stormwater management systems for new developments and retrofit applications, working closely with consulting engineers, regulatory agencies, manufacturing partners, and internal engineering staff. The Design Engineer will report to the Engineering Manager and play an important role in preparing technical drawings, engineering submittals, and designs that meet applicable stormwater quality regulations and project requirements. Key Responsibilities • Prepare engineering designs, technical drawings, calculations, and submittal packages for stormwater quality and treatment systems., • Develop stormwater management solutions for new construction, redevelopment, and retrofit projects., • Ensure engineering designs comply with applicable stormwater quality regulations, local ordinances, and regulatory approval requirements., • Coordinate with consulting engineers, regulatory agencies, and project stakeholders to obtain design approvals., • Provide technical support to an established network of affiliate partners, including precast concrete manufacturers and stormwater management companies., • Work with internal engineering and manufacturing teams to transition approved designs into production., • Support third-party manufacturing partners by providing engineering documentation, technical specifications, and design clarification., • Review project requirements and recommend appropriate stormwater capture, treatment, and water quality solutions., • Participate in occasional job site visits, research testing, and field evaluations as needed. Qualifications • Bachelor's degree in Civil Engineering, Environmental Engineering, or a related engineering discipline preferred., • Ideally 3+ years of experience in stormwater management, stormwater quality design, drainage engineering, or related civil engineering applications., • Working knowledge of stormwater quality regulations, permitting requirements, and regulatory approval processes., • Experience preparing engineering drawings, technical calculations, and design submittals for land development or infrastructure projects., • Familiarity with stormwater treatment systems, water quality BMPs, drainage infrastructure, and stormwater capture technologies., • Experience with AutoCAD or similar engineering design software preferred., • Understanding of precast concrete products, underground infrastructure, or manufactured stormwater treatment systems is a plus., • Strong communication, problem-solving, and organizational skills., • Ability to collaborate effectively with consulting engineers, regulatory agencies, manufacturing partners, and internal engineering teams. Compensation & Benefits Our client offers a competitive compensation package based on experience and qualifications, including: • Comprehensive health benefits, • 401(k) retirement plan, • Potential annual performance bonus, • Professional growth and development opportunities, • Potential hybrid work arrangement based on qualifications and experience Interested Candidates For more information, please submit your resume in confidence to blake@mriz.net. Blake Chastain MRI Zionsville 1531 West Oak Street Zionsville, IN 46077 www.mriz.net Due to the high volume of resumes received, only applicants with specific experience requested by our clients will be contacted. All replies are held in strict confidence. MRI Zionsville will not share your personally identifiable information without your permission.

Job Description T&M Associates is seeking an experienced and driven Site/Civil Engineer to play a key role within our Land Development team. This role can be based in any of our three N.J. offices (Middletown, Bloomfield or Mount Laurel). This is an excellent opportunity for a motivated professional to contribute to a wide range of complex and meaningful projects while continuing to grow technically and professionally. The ideal candidate brings a strong background in land development design and a comprehensive understanding of zoning analysis, site layout, grading and drainage design, utility coordination, stormwater management, soil erosion and sediment control, flood hazard area design, and applicable local, regional, and state regulations. This position offers a flexible hybrid work environment that supports both independent productivity and collaborative team engagement. Key Responsibilities • Prepare detailed site designs, including grading, stormwater management, utilities, drainage, soil erosion and sediment control, and overall site planning., • Develop technical reports, plans, specifications, cost estimates, and support contract documents for land development projects., • Perform feasibility and due diligence analyses and support land use and zoning approvals., • Model and design stormwater management systems and supporting infrastructure., • Coordinate and secure land use and construction permits from local, county, and state agencies., • Contribute to project delivery efforts while building toward a leadership role, including mentoring junior staff, delegating tasks, and engaging with clients and regulatory agencies. Qualifications • Bachelor’s degree in Civil Engineering or a related discipline is required., • Professional Engineer (PE) license preferred., • Minimum of 8 years of relevant land development experience, including expertise in zoning, site design, grading, drainage, utilities, and stormwater management. Experience with NJDEP and NJDOT permitting is advantageous., • Strong proficiency in AutoCAD, Civil 3D, and stormwater modeling software., • Ability to effectively manage responsibilities both independently and within a collaborative, fast-paced team environment., • Excellent written and verbal communication skills; ability to delegate tasks to designers and staff engineers. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $105,000 - $135,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Our Operations and Engineering Intern will work closely with our skilled Staff at their project to learn and understand what is involved with the daily operation and maintenance of a water/wastewater treatment facility. This internship serves as an introduction to the water/wastewater industry and explores potential career pathways in operations, engineering, and facility management. You will become part of a mission-driven organization dedicated to serving our community and protecting our environment. Primary Duties/Responsibilities: • This internship position will provide hands-on experience in a water/wastewater environment and will involve working under the guidance of an experienced full-time employee (FTE)., • This internship is focused on our Transmission & Distribution Department, where you will gain hands-on learning and exposure to the fundamental business processes and procedures essential to that department's operations., • This position involves laboratory, technical, maintenance, and groundskeeping work in the operation of a wastewater treatment facility. This position will also work with the Regional Engineer to discover the planning, development and execution of construction projects at a water/wastewater facility. This position also provides exposure to experienced operations leaders who will teach and provide knowledge about their specialized areas, broadening your understanding of how different functions contribute to overall facility success., • Candidates with a keen eye for detail, a strong work ethic, and the ability to work collaboratively in a team are encouraged to apply. Work Environment: • Ability to work in a wastewater environment., • Environments vary by internship function from office to field to plant., • Our aim is to provide tangible industry job experience to each intern.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Rising seniors., • Tech Schools. Knowledge/Skills/Abilities: • Strong communication skills, including written, verbal, listening, presentation and facilitation skills., • Demonstrated ability to build collaborative relationships., • Strong ability to follow instructions accurately., • Good organizational and time management skills., • Willingness to work under the guidance of an experienced FTE., • Reliable and punctual attendance. Physical Requirements: • Capability to lift objects weighing approximately 30-35 lbs. Additional Information Pay Rate: $21.00 per hour. Benefits: Interns are considered temporary employees. Medical and basic life insurance coverage is available to temporary employees scheduled to work 20 or more hours per week immediately following 60 days of service. Employees must elect or waive medical coverage within 45 days of their eligibility date. Veolia observes 11 holidays. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionProtection and Control Engineer – Solar & Battery Storage Commissioning Company Overview:Soltage is a leading independent power producer that develops, owns and operates distributed solar and energy storage assets across the United States. With a track record spanning more than 20 years, Soltage has developed more than 130 projects representing over 600 MW, and has a national development pipeline of more than 2 GW. Soltage is owned by Igneo Infrastructure Partners, which manages more than US$24.5 billion in direct infrastructure assets. Position Description:Soltage is seeking an experienced Protection and Control (P&C) Engineer to lead P&C, SCADA, and commissioning engineering for our standalone energy storage (BESS), solar-plus-storage, and solar PV projects, from relay settings and design review through utility witness testing and energization. Reporting directly to the SVP of Engineering, you’ll help expand Soltage’s storage footprint in Mid-Atlantic and Northeast urban centers and other U.S. markets. Job Responsibilities: • Provide P&C, SCADA, RTAC, communications, and commissioning engineering for utility-scale BESS, solar PV, and medium- and high-voltage substations across North America., • Lead development and review of P&C packages, including protection philosophies, relay settings coordination, AC/DC schematics, wiring diagrams, panel layouts, and communications architecture., • Develop and review commissioning procedures, relay logic, cause-and-effect matrices, functional specifications, and test documentation., • Oversee SCADA and Energy Management System (EMS) integration, including RTUs, RTACs, HMIs, historians, remote communications, and cybersecurity., • Support implementation of communication protocols including DNP3, Modbus TCP/IP and RTU, IEC 61850, IEC 60870-5-104, OPC UA, and IEEE C37.118., • Lead commissioning activities, including point-to-point verification, relay testing, SCADA checkout, utility witness testing, grid synchronization, and commercial operation support., • Perform root cause analysis on protection events, equipment failures, and communication issues, and recommend corrective actions., • Review vendor submittals, protection studies, commissioning reports, and as-built documentation., • Support EPC scopes of work, technical specifications, and RFPs for P&C, SCADA, and commissioning services. Experience and Education Requirements:Required Qualifications: • Bachelor’s degree in engineering required (Electrical Engineering preferred)., • Strong communication and consultant-management skills; comfortable working with all levels, from field teams to executives and board members., • Highly organized and self-directed; able to manage multiple projects under tight deadlines., • Minimum of 3 to 5 years of project or field engineering experience on renewable construction projects, with a focus on P&C design and implementation and plant commissioning., • Strong knowledge of P&C systems for utility-scale substations, BESS, solar PV, and medium-voltage interconnection facilities., • Working knowledge of SCADA architectures, substation automation, RTACs, RTUs, protective relays, and industrial networking., • Working knowledge of electrical protection principles including overcurrent, differential, distance, transformer, feeder, bus, breaker failure, synch-check, anti-islanding, and transfer trip protection schemes., • Familiarity with utility interconnection requirements and applicable North American codes and standards., • Working knowledge of commissioning processes including FAT, SAT, relay and protection testing, SCADA verification, and energization., • Familiarity with commissioning documentation, including RFIs, submittals, ITPs, punch lists, deficiency tracking, and as-builts., • Experience writing proposals and presenting to consultants, authorities having jurisdiction (AHJs), and regulatory agencies., • Proficiency in Microsoft Office (Word, Excel, PowerPoint, Project, and Outlook). Preferred Qualifications: • Experience configuring and troubleshooting SEL protective relays, SEL RTAC platforms, Ethernet switches, and related automation equipment., • New York State Engineer in Training (EIT) certification., • Experience with construction management and scheduling software such as Procore or Primavera P6. Location:This is a full-time, hybrid position based out of Soltage’s headquarters in Jersey City, NJ. Application Instructions: To apply for this position, resumes may be sent directly to HR@soltage.com with “P&C Engineer” as the subject line. Soltage is an equal opportunity employer and is committed to providing a work environment that is free from all forms of discrimination. ️‍PROTECT YOURSELF FROM FRAUDPlease be aware that Soltage emails will always come from the “@soltage.com” domain; a genuine offer document will not be signed by a recruiter; and Soltage will never request your personal banking information or payment of any kind during the recruitment process. If you have received what you suspect is a fraudulent offer or suspicious communication with Soltage, or if you have any questions, please reach out to HR@soltage.com.

Job Description T&M Associates is seeking a Senior Staff Designer / Engineer with 4+ years of experience to join one of our New Jersey Offices. This position will be in the MEP Practice with a primary focus on plumbing and fire protection engineering. Qualifications: • Design of plumbing and fire protection systems for buildings. This may include domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems., • Preparation of construction documents including calculations, drawings, details, and specifications., • Construction administration services such as site visits, construction meetings, review of submittals, and responding to RFI’s., • Experience with AutoCAD and Revit required. Responsible: • B.S. in Mechanical Engineering or a related field required., • EIT Certification or PE License is preferred, not required., • 4+ years prior experience in designing plumbing and fire protection systems., • Experience with and knowledge of Microsoft Word, Excel, AutoCAD and Revit required., • Ability to interact with all levels of employees, especially Mechanical, Electrical and Structural Engineers., • Willing to learn new interesting technical fields., • Excellent written and verbal communication skills., • Ability to work on several projects at once., • Ability to work in a team environment, self-starter, demonstrated organizational skills, and willingness to learn. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $90,000 - $115,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. #LI-HYBRID

Job DescriptionRole NameSafety Engineer – Autonomous Machinery II–IIIWork LocationMendon/Logan, Utah (Onsite) Job Summary We are seeking a Safety Engineer to ensure that our autonomous machines are safe, both as designed and as deployed. This role combines safety analysis and engineering design oversight for autonomous heavy machinery and vehicles with site assessments and safety planning for prospective worksites where autonomous systems will be deployed. The Safety Engineer reports to the Blitz Chief and supports both Blitz and Business Development activities. The Blitz Team is the client's rapid-execution engineering group, focused on transforming new concepts into operational autonomous systems. This cross-functional team spans software, electrical, mechanical, systems engineering, and field operations. Blitz accelerates product development, validates new ideas, and supports the launch of customer pilot programs using real equipment in active operating environments. Successful team members thrive in a fast-paced environment and demonstrate adaptability, hands-on problem-solving abilities, and a willingness to take on diverse responsibilities. Essential Duties and Responsibilities: 1. Engineering Design Safety • Review mechanical, electrical, control, and software designs for safety and lead engineering design safety reviews., • Conduct and maintain hazard and risk analyses, including HARA, STPA, FMEA, and FTA, for machine systems and control architectures., • Derive safety requirements from hazard analyses and collaborate with engineering teams to ensure requirements are traceable and verifiable., • Determine the required performance level or safety integrity for each safety function and verify that the implemented design meets the specified requirements., • Develop verification and test plans for safety functions, establish acceptance criteria, and review supporting test evidence., • Maintain comprehensive safety documentation, including analyses, requirements, safety cases, and verification records., • Support internal and external safety audits., • Assist engineers in taking ownership of the safety of their respective designs.2. Customer Site Safety, • Travel to customer sites early in the project lifecycle to assess operating environments, including traffic patterns, machine-personnel interactions, terrain, sight lines, adjacent manned equipment, infrastructure, and existing site procedures., • Prepare written site assessments identifying the requirements for safe autonomous operations, including any conditions that may make autonomous deployment inadvisable., • Develop comprehensive site safety plans covering operating area boundaries, machine interaction and exclusion zones, emergency stop architecture and coverage, perimeter and access control, signage, communications, and maintenance isolation., • Specify required protective measures, including guarding, interlocks, emergency stop hardware, presence sensing, warning devices, and access control., • Oversee the installation of protective measures and verify their effectiveness through onsite testing., • Define safe operating parameters for each machine and site and issue or recommend determinations permitting autonomous operations., • Document customer safety responsibilities and provide training to operators, maintenance personnel, supervisors, and safety teams., • Serve as the primary safety contact for customer operations and safety leadership., • Advise commercial and project teams on safety constraints early in the project lifecycle to help shape project scope., • Incorporate recurring site hazards into engineering design requirements.Essential Education, Work Experience, and Job Skills Education and Experience: • Bachelor's degree in Engineering, Occupational Safety, or a related technical field. Equivalent hands-on experience, including trade, military, or field experience, will be considered in place of a degree., • Minimum of 3 years of engineering experience involving significant responsibility for the safety of machinery or powered equipment in active industrial environments. Five or more years of experience is preferred., • Experience in industrial environments such as mines, quarries, manufacturing plants, food processing facilities, distribution yards, construction sites, or agricultural operations., • A dedicated safety engineering title is not required. Candidates with backgrounds in plant maintenance, controls engineering, industrial or manufacturing engineering, machine building and integration, or mine safety are encouraged to apply, provided they have experience assessing and mitigating hazards associated with powered equipment., • Candidates with strong expertise in either engineering design safety or customer site safety and the ability to develop expertise in the other area will be considered., • Demonstrated experience personally identifying hazards on equipment or at operational sites and implementing protective measures through specification, installation, and verification. This experience may be accepted in place of formal safety certifications or familiarity with specific published standards.Technical Skills and Competencies, • Ability to perform machinery risk assessments by identifying hazards, evaluating severity, exposure frequency, and hazard avoidability, and determining the required level of risk reduction., • Understanding of the hierarchy of risk reduction, including eliminating hazards through design, implementing guarding and safeguarding measures, and applying warnings and training to address residual risks., • Ability to select and design protective measures, including guards, interlocks, presence-sensing systems, emergency stop and all-stop circuits, access controls, and warning devices., • Ability to determine the required reliability of safety functions based on the risks they address and verify their effectiveness through functional testing., • Experience developing traceable, testable safety requirements based on hazard analyses and defining verification plans to demonstrate compliance., • Ability to assess active worksites for hazards involving mobile equipment, machine-personnel interactions, traffic patterns, sight lines, terrain, and operating zone boundaries., • Familiarity with energy isolation, lockout/tagout (LOTO) procedures, and machine guarding requirements in regulated workplaces., • Sound judgment in assessing real-world risks and the ability to develop and communicate defensible safety arguments to engineers and customer operations leadership., • Strong hands-on technical skills, including taking measurements, using hand tools, interpreting electrical schematics, inspecting safety devices, and conducting functional verification tests., • Ability to communicate effectively and establish credibility with operators, mechanics, supervisors, engineers, and customer stakeholders.Additional Requirements, • Willingness to travel domestically and internationally to active industrial sites up to 25% of the time, including on short notice., • Valid driver's license., • Ability to obtain required site access credentials, including MSHA Part 46/48 training.Preferred Qualifications, • Experience with autonomous or semi-autonomous heavy equipment, including haul trucks, dozers, loaders, excavators, compactors, and yard trucks, or with Automated Guided Vehicle (AGV) and Autonomous Mobile Robot (AMR) fleets in production environments., • Experience designing layouts, commissioning, or implementing safety measures for automated facilities, work cells, manufacturing plants, or yard operations., • Experience conducting customer site assessments, training customer personnel, and supporting commercial teams in evaluating and defining site requirements., • Experience with requirements management, traceability tools, and safety case development., • Familiarity with applicable machinery safety standards, including:, • ISO 12100 – Risk assessment and risk reduction., • ISO 13849 or IEC 62061 – Safety-related control systems and performance levels., • ISO 13850, ISO 13855, ISO 13857, and ISO 14119 – Emergency stops, safeguard positioning and distances, and interlocks., • Familiarity with autonomous and mobile machinery standards, including ISO 17757, ISO 3691-4, ANSI/ITSDF B56.5, ISO 19014, ISO 21815, ISO 18497, and ISO 25119., • Familiarity with OSHA 29 CFR 1910 Subpart O and 1910.147, MSHA 30 CFR Parts 56 and 57, and NFPA 70E., • Knowledge of EMESRT design philosophies and ICMM vehicle interaction guidance., • Professional certifications such as CMSE, CFSE, CFSP, TÜV Functional Safety Engineer, or CSP., • Familiarity with IEC 61508, ISO 26262, or UL 4600.Physical Requirements This position requires the ability to: • Travel by air and vehicle to domestic and international customer sites., • Work outdoors for extended periods in varying weather and environmental conditions, including heat, cold, dust, noise, and precipitation., • Navigate active industrial sites, including uneven or sloped terrain, ladders, and access platforms., • Mount and dismount heavy equipment and inspect components at ground level, beneath machinery, and at elevated locations., • Wear required personal protective equipment (PPE) for extended periods., • Lift and carry up to 50 pounds., • Remain alert to moving heavy equipment and respond to audible warnings and radio communications in high-noise environments., • Operate a computer and communicate effectively in person, by telephone, and by radio.Equal Employment Opportunity Our client is committed to fostering a diverse, inclusive, and equitable workplace where all employees and applicants have equal opportunities. The client prohibits discrimination and harassment based on race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other legally protected characteristic. The client complies with all applicable federal, state, and local nondiscrimination laws and is committed to providing reasonable accommodations for individuals with disabilities throughout the hiring process. “All qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.”

Job Description About the Company & Project Our client is a leading global Consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Senior Civil Engineer; Utilities for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Senior Civil Engineer; Utilities, you will play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our client's purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Serve as the technical SME for utility infrastructure systems during construction, including:, • Water distribution, • Sanitary sewer systems, • Stormwater drainage systems, • Natural gas distribution, • Electric power distribution and transmission, • Telecommunications and fiber-optic networks, • Serve as the civil/utility SME during construction for a major Amtrak design-build project., • Provide technical support to field teams and lead resolution of utility and civil-related construction issues., • Review and validate completed designs against field conditions, constructability, and project constraints., • Evaluate and respond to RFIs, submittals, field changes, and design deviations., • Coordinate with contractors, Amtrak, utility owners, and multidisciplinary teams to resolve conflicts and interface issues., • Support utility coordination during construction, including tie-ins, relocations, and sequencing., • Contribute to broader civil scope, including drainage, grading, and corridor infrastructure as needed., • Review shop drawings and as-builts and participate in field inspections and construction meetings., • Identify and mitigate risks impacting cost, schedule, and constructability., • Provide technical guidance to junior staff and support overall project delivery. Qualifications • Bachelor's degree in civil engineering (Master's preferred)., • Professional Engineer (PE) license in New Jersey or New York., • 10+ years of progressive civil engineering experience with strong emphasis on utility infrastructure and construction-phase support., • Demonstrated ability to resolve complex field issues, constructability challenges, and contractor-driven design changes., • Broad civil engineering knowledge, including utilities, drainage, grading, and infrastructure systems., • Familiarity with Amtrak standards, as well as AREMA, NJDOT, and NYDOT requirements., • Experience coordinating with contractors, utility owners, and public agencies., • Proficiency in AutoCAD Civil 3D, MicroStation, and related engineering tools., • Strong communication, problem-solving, and stakeholder coordination skills.\, • Local resident of NYC metro tri-state area and willing to work in a hybrid project office environment., • Utility engineering and coordination for major transportation, rail, transit, tunneling, highway, airport, or municipal infrastructure projects., • Experience working within design-build, progressive design-build, or alternative delivery environments., • Familiarity with FRA, FTA, DOT, municipal, and utility company design and permitting requirements. The estimated starting salary for this position is $150k. Starting salary may vary based on permissible, non-discriminatory factors such as experience, skills and qualifications. This is an excellent opportunity for a Senior Civil Engineer; Utilities looking to work on the most challenging, high-profile and innovative projects. If you're an ambitious professional who thrives in a client-facing role and enjoys delivering solutions that drive project success, we encourage you to apply. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k). Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status.

Job Description The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Estimated salary range for this position is $140,000 to $195,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Oversee and assist in the development and review of technical specifications, drawings and construction documents. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. SUPERVISORY RESPONSIBILITIES: • This position has no supervisory responsibilities Qualifications Education • Bachelor’s degree from a four-year college or university in Civil/ Structural Engineering or Architecture. Work Experience • Five plus years of experience in the architectural and engineering consulting industry. Licenses and Certifications • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%).

Job Description RVE an Ardurra company is seeking a water/wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 8 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input after the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail Education and Experience Requirements: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training Compensation is based on experience, qualifications, and other job-related factors. The expected hourly rate for this position is $30 to $45 The firm also offers a comprehensive benefits package, including medical, dental, and vision insurance, paid time off, paid holidays, and a 401(k) retirement savings plan. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KS2 Documents. The role also involves reviewing plans, monitoring construction progress, promoting observance of building codes, and serving as a liaison among contractors, project managers, regulatory agencies, and the community. The Inspector supports project documentation, reporting, and issu

Job Description At Rimkus, our Built Environment Solutions team operates on a global scale with the advantage of local expertise. Our licensed engineers, architects, and technical specialists bring deep knowledge of regional requirements and industry best practices, enabling us to deliver customized, high-quality solutions that maximize the success of our clients’ investments. With a comprehensive portfolio that spans nearly every engineering and architectural discipline, we help organizations plan, build, and manage assets with confidence. What sets us apart is our forward-thinking approach. We integrate carbon footprint reduction, resiliency, maintainability, and long-term sustainability into everything we do helping clients not just meet today’s needs but prepare for tomorrow’s challenges. From design and pre-construction through construction, closeout, and ongoing operations, we provide tailored support at every stage. By identifying potential issues before they arise, we mitigate risks, extend asset life, and reduce costly unplanned repairs. Whether an asset is newly constructed, leased, or purchased, our innovative solutions empower clients to operate more efficiently and sustainably. Joining Rimkus means being part of a team that’s shaping the future of the built environment—one smart, resilient solution at a time. Requirements About the Role We are seeking a Sr. Consultant - Building Science to provide technically sound solutions for existing building envelope failures and to support new construction and rehabilitation projects. This role works closely with property owners, developers, and contractor clients on a wide range of commercial and residential projects, balancing technical expertise with client-facing collaboration. What You’ll Do • Design upgrades, maintenance, and restoration solutions for existing structures, as well as support new construction projects., • Investigate and repair failed building envelope systems; perform condition assessments and failure investigations., • Conduct constructability reviews and third-party peer reviews of plans and specifications., • Manage multiple projects simultaneously, ensuring quality control and meeting budgets, scopes, and deadlines., • Prepare technical reports, repair designs, bid documents, addenda, and construction documentation., • Research building histories and applicable historical and current building codes., • Build and maintain strong, long-term client relationships. What You Bring • Strong knowledge of commercial and residential building envelope systems and material selection., • Experience designing glazing, cladding, insulation, air barriers, roofing, and waterproofing systems., • Ability to develop construction details and specifications using building codes and ADA requirements., • Proven skills in assessing and evaluating building performance., • Excellent written communication and report-writing skills. Qualifications • Bachelor’s degree or higher in Architecture, Architectural Engineering, Civil Engineering, or Structural Engineering., • 3+ years of experience in building envelope design, investigation, construction documentation, and/or project management., • Registered Architect (RA) or Professional Engineer (PE) preferred, but not required., • Proficiency with AutoCAD and/or Revit., • Ability to travel approximately 10%, including occasional out-of-state assignments. The Salary Range for this position is $104,000 - $156,000 and is dependent on education, experience, location and certifications/licensure. PHYSICAL DEMANDS, OVERTIME, AND TRAVEL Physical Demands – Work will be performed both in an office setting and at outside locations (i.e., Client’s office, industrial, construction, and/or residential sites). Employee is frequently required to stand, sit, climb ladders, bend, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employee may lift and/or move up to 50 pounds. Employee must be attentive, focused, and alert when conducting site inspections, speaking, and interacting with clients, preparing drawings and written reports. Clear vision and depth perception are also necessary. Overtime – This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with one hour for lunch. There will be periods where overtime will be required, which the employee will need to comply with in order to meet the demands of the position. Additional Information: NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a complete benefits package that includes medical, dental, vision, life, disability, employer-matching 401(k), and opportunities for advancement! (www.rimkus.com) At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-AL1 Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Work From Home

Job Description Genesis Technical Staffing is seeking project engineers for onsite roles in multiple states: Bayway, NJ—Ponca City, OK—Borger, TX—Sweeny, TX—Rodeo, CA—Ferndale, WA—Billings, MT The On-Site Project Engineer will serve as a permanent, on-site representative and the primary day-to-day interface between local site personnel and office execution teams. This individual will facilitate the integration of project execution activities between the sites and support the development of new project scopes, and provide on-site coordination to improve alignment, responsiveness, and overall project delivery. Key Responsibilities • Act as the primary on-site liaison between local client staff and the client’s engineering, project management, and support personnel., • Facilitate efficient communication, coordination, and issue resolution between refinery stakeholders and other offices., • Support integration of project execution activities across engineering, procurement, construction, and site operations., • Support Management of Change (MOC) coordination activities by helping track, communicate, and facilitate required inputs, reviews, and approvals between site personnel and the client’s other teams., • Assist in identifying, developing, and defining new project scope opportunities in coordination with client personnel., • Coordinate field information gathering, site walkthroughs, and scope validation to support development of project deliverables, estimates, and execution plans., • Help align project priorities, technical requirements, schedules, and work processes between client personnel and project teams., • Provide on-site input to improve constructability, operability, maintainability, and overall execution readiness for proposed and active work., • Monitor project interfaces, communicate emerging concerns, and help drive timely decisions to minimize delays, rework, and execution risk., • Participate in client meetings, planning sessions, scope reviews, and other project coordination activities as required., • Maintain strong working relationships with the site operations, maintenance, engineering, and project stakeholders while representing the client in a professional manner., • Support safe work practices and ensure coordination efforts are consistent with site requirements., • Provide regular status updates to the client’s leadership regarding project opportunities, execution issues, priorities, and client coordination needs., • Perform as Project Manager for small projects. Qualifications • Bachelor’s degree in Engineering, Construction Management, • Five plus years (preferred) of demonstrated experience as a Project Engineer, Project Manager, or similar project execution role in refining, petrochemical, or industrial facilities., • Strong understanding of brownfield project execution, field coordination, and owner-contractor interface management., • Ability to develop project scopes and support early project planning activities., • Strong communication, organization, and relationship management skills., • Ability to work effectively with site operations, maintenance, engineering, and contractor personnel., • Working knowledge of project controls, schedule coordination, and execution planning is preferred., • Commitment to safety, quality, and responsive client service., • Ability to work independently with remote supervision. Self-starter., • Must be willing and able to work in the field., • All candidates must pass background checks, drug screening, and qualify for issuance of TWIC credentials.\nCompany Description At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things. Genesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/ At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things.\r\n\r\nGenesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\n\r\nBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/

Job Description T&M Associates is seeking a multi-talented Principial Engineer to join our Water Market! This opportunity is available in any of our New Jersey or Pennsylvania offices with the flexibility of a hybrid work environment. We are looking for an experienced professional with 8+ years in planning, design, and construction administration of water process, treatment, and distribution projects. This individual will play a key role in managing and designing utility infrastructure projects, with a primary focus on providing project management and design support for linear water, sanitary sewer, and storm sewer improvements for the City of Philadelphia’s utility infrastructure replacement and upgrade program. Key Responsibilities • Lead and manage projects related to drinking water, wastewater, and stormwater systems., • Provide design support for linear water, sanitary sewer, and storm sewer infrastructure upgrades., • Oversee construction administration and ensure compliance with project requirements., • Prepare technical reports, studies, and project documentation., • Track and manage financial performance of assigned projects., • Coordinate workload and provide mentorship to junior staff., • Participate in client meetings, ensuring strong communication and collaboration. Qualifications • Bachelor’s Degree in Civil Engineering required., • 8+ years of related experience in water process, treatment, and/or utility infrastructure projects., • Professional Engineer (PE) license strongly preferred, • At least 2 years of project management experience strongly preferred., • Proficiency in AutoCAD and Civil 3D required., • Experience with MS Office and MS Project (MS Access a plus)., • Strong communication and client-interaction skills. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $105,000 - $135,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job Description Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking an Engineer Diver for our growing Marine and Coastal engineering practice in our Florham Park and NYC offices. The successful candidate will support the growth of our Marine Asset Management service line by supporting field inspections, developing inspection reports, generating rehabilitation construction documents, and providing waterfront construction oversight in the NYC metropolitan area. The ideal candidate for this position is an enthusiastic, self-motivated individual who has between 0 and 5 years of inspection and design experience. Successful candidates enjoy working in a team environment through challenging projects. Strong communication skills, both written and verbal, are critical. Salary range for this position starts at $75k, based on experience. What You'll Do • Perform waterfront (above and underwater) inspections of marine and coastal infrastructure; including piers, wharves, bulkheads, seawalls, and revetments, • Collect field data as required to document and communicate existing conditions using measurements, sketches, destructive and non-destructive testing equipment, point cloud models, and emerging technologies, • Develop detailed inspection reports to communicate the results of field investigation efforts, tailored to the individual requirements of the client. A focus on leveraging emerging technologies to identify opportunities to maximize efficiencies., • Support the development of rehabilitation and new construction design documents., • Support the development of design calculations as required to support inspection and rehabilitation projects including load ratings, service life analysis, and rehabilitation detail design., • Assist with dive operations including dive safety planning, equipment maintenance, inspection record tracking, and planning training events., • Support the mobilization and demobilization of diving equipment small boat operations and mobilization/demobilization of dive and survey equipment, • Coordinate with clients, contractors, and regulatory agencies in the fieldRequired Qualifications, • 0–5 years of relevant professional experience, • ADCI Entry Level Tender/Diver Certification, • Bachelor's degree in engineering (civil, structural, ocean, coastal, or related discipline) from an ABET-accredited program, • Engineer in Training (EIT) certificate (or Engineer Intern as applicable), • Current commercial dive physical meeting ADCI Consensus Standards requirements, • Current safety certifications including:, • OSHA 10, • First Aid, CPR, and AED,, • O2 Provider, • Bloodborne Pathogens, • Valid Transportation Worker Identification Card (TWIC), or ability to obtain prior to employment., • Valid driver's license and acceptable driving record., • Ability and willingness to travel and work outdoors in variable weather, tidal, and current conditions., • Ability and willingness to support overnight travel and non-standard hours., • Strong quantitative/math and analytical skills, • Core competency in Microsoft Office Products, including Word, Excel, PowerPoint, Teams, and Outlook, • Excellent written and verbal communication skills with a strong attention to detail, • Ability to pass pre-employment and periodic drug and alcohol screening.Preferred Qualfications, • ADCI Air Diver certification, • Master’s degree in engineering (civil, structural, ocean, coastal, or related discipline) from an ABET-accredited program, • Professional Engineering (PE) license in New York and/or New Jersey., • Documented experience performing waterfront inspections per ASCE MOP 130, NYCEDC Waterfront Inspection Manual, and/or PANYNJ., • Experience working with underwater non-destructive testing equipment., • Point Cloud Modelling and/or Hydrographic survey experience., • Working knowledge of AutoCAD, Civil 3D, Revit, or GIS (ArcGIS Pro), • Structural analysis software experience (e.g., RISA, SAP2000, STAAD), • Asset management experience including the development and/or management of asset databases, • Current safety certifications including:, • OSHA 30, • HAZWOPER 40-hour, • Boat operator certification and/or U.S. Coast Guard Auxiliary’s Boating Skills and Seamanship (BS&S)Physical Requirements This position requires operating as a commercial diver and tender during commercial diving operations in an industrial environment. This requires, but is not limited to having the ability to load and unload commercial diving equipment from vessels and trucks; don and dof commercial diving equipment; enter and exit the water in commercial diving equipment via ladders, fulfill the requirements of a standby diver; and operate in low temperature, low visibility, and high current underwater environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. We offer growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer at our Newark, NJ office (Hybrid schedule - next to the train station). Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Responsibilities: • We are looking for someone who works well in a team environment and is willing to learn from others. Experience with Revit is an essential part of this role., • You will work as part of a project team to develop the project documents for large-scale, complex building projects, corroborate/coordinate with other design team members including Architect, Mechanical, Plumbing or Structural engineers to ensure electrical systems are integrated and coordinated with the project’s goals., • Serve as design engineer on a variety of projects from new construction to renovations from schematic design to construction. Project types include but are not limited to office buildings, labs, data centers, academic, high rise residential, hotels, health care, industrial, financial, government., • Be familiar with associated Codes and Standards applicable to the project., • Responsible for the design of power distribution, lighting, emergency and standby power supply in accordance with all applicable NEC codes and standards. Requirements: • 5+ years of related experience, • Bachelor’s degree in electrical engineering or equivalent experience, • Revit knowledge is a plus, • Familiarity with BIM coordination workflows and tools like Autodesk Construction Cloud and Navisworks., • Organizational and time-management abilities Flexible & Hybrid Culture Compensation range is $80,000 - $110,000 plus yearly bonus dependent on years of experience, licensure, education, and project portfolio. We know that work/life integration is important to our employees. Our hybrid work style (2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com.

Job Description T&M Associates is seeking a highly skilled and experienced Water Engineer to join our dynamic team! In this position, you will be responsible for overseeing and executing projects related to wastewater treatment, hydraulic design, and regulatory compliance. This role requires extensive experience in wastewater characterization, treatment process improvement, and engineering design. The ideal candidate will have a strong background in industrial wastewater treatment, excellent communication skills, and the ability to work collaboratively with clients and technical experts. Key Responsibilities: • Perform comprehensive wastewater characterizations based on industrial practices, processes, and regulatory requirements., • Identify and evaluate potential improvements in treatment processes and equipment to enhance performance and efficiency., • Conduct wastewater treatment process calculations and assist in process modeling to properly size and configure treatment processes., • Perform hydraulic calculations and develop system head curves for designing pumping systems., • Conduct cost-benefit analyses for projects to ensure economic feasibility and optimal resource allocation., • Design layouts and specifications for treatment system improvements, including equipment, pumps, piping, tanks, chemical feed systems, and process monitoring and control systems in collaboration with technical experts and other design disciplines., • Evaluate and ensure compliance with regulatory requirements; prepare and submit regulatory permit applications as needed., • Assist in construction-related activities including reviewing shop drawings and submittals, responding to RFIs (Requests for Information), preparing RFPs (Requests for Proposals), tracking project progress, reviewing contractor pay applications, and advising the owner on discrepancies and changes. Requirements: • Bachelor’s Degree in Civil or Environmental Engineering from an ABET-accredited university is required., • Professional Engineers (PE) License is required., • 8+ years of engineering experience in the water and/or wastewater disciplines, with specific expertise in industrial wastewater treatment design., • In-depth knowledge of local, state, regional, and federal regulatory requirements related to water and wastewater., • Excellent written and verbal communication skills; strong problem-solving and operational skills., • Client coordination and collaboration experience are essential., • Willingness to travel up to 25% of the time, including occasional overnight stays. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $105,000 - $135,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description About INFOTRAN: INFOTRAN Engineers, P.C. is a leading provider of professional engineering and architectural services since 2007. We specialize in construction management and inspection, traffic engineering, and transportation planning, serving both public and private sectors with a commitment to delivering innovative solutions. Job Description: INFOTRAN seeks an experienced Construction Inspector with expertise in paving, roadway restoration, infrastructure and highway construction to oversee projects in the NJ/NY area. The ideal candidate will ensure compliance with agency specifications, codes, and safety standards while collaborating with contractors, engineers, and government stakeholders. Key Responsibilities: • Lead and oversee daily field inspections of roadway, paving, curbs, sidewalks, drainage, utilities, traffic control, and other highway construction activities on DOT projects., • Ensure contractor work is executed in full compliance with DOT plans, specifications, contract documents, and applicable standards (NJDOT, NJTA, NYCDOT, NYCDDC, NYSDOT, etc.)., • Evaluate construction methods, material placement, compaction, asphalt and concrete operations, and workmanship to verify adherence to approved QC/QA requirements., • Prepare, review, and validate detailed daily inspection reports, quantities for payment, manpower/equipment data, and site condition records submitted by junior inspectors if applicable., • Serve as a key point of coordination between the contractor, resident engineer, utilities, and agency representatives, supporting issue resolution and timely decision-making in the field., • Monitor traffic control and work zone safety to confirm compliance with MUTCD, OSHA, and DOT safety protocols, and immediately report unsafe practices., • Review and analyze test results, QC/QA reporting, and field measurements to support payment approvals and contractual compliance evaluations., • Identify and document non-conforming or defective work, recommend corrective actions, and track resolutions through follow-up inspections., • Provide guidance and technical support to junior inspectors to maintain consistent inspection standards and reporting quality across the project. Qualifications: • 5+ years of construction inspection experience in roadway, paving, and highway infrastructure projects (DOT experience required)., • Education in Civil Engineering, Construction Management, or a closely related discipline., • Certifications: NICET Level III or IV preferred; ACI and OSHA required., • Proficient in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) for reporting and documentation., • Strong communication, leadership, and teamwork skills for coordination with contractors, engineers, and agency personnel on active construction sites.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ Facility Manager About the role As a Facility Manager, you are responsible for making sure systems of the built environment, or facility, work harmoniously. You make sure the places in which people work, play, learn and live are safe, comfortable, productive and sustainable. You will contribute to the organization's bottom line through your responsibility for maintaining what are often an organization's largest and most valuable assets, such as property, buildings, equipment and other environments that house personnel, productivity, inventory and other elements of operation. Responsibilities: Safety and compliance • Uphold OSHA, EPA and site safety standards and industry codes at both sites, • Own fire and life safety: fire suppression, sprinkler and alarm testing, • Share accountability for OSHA Process Safety Management (PSM) and EPA Risk Management Program (RMP) compliance for the Clifton ammonia system, • Enforce lock-out/tag-out and safe work practices; act as a HazMat responder when needed, • Own the Safety Data Sheet (SDS) binder at both sites Maintenance and building systems • Build and run a preventative maintenance and life-cycle program for HVAC and other facility systems to cut unplanned downtime, • Lead and document daily, weekly, monthly and annual inspections, • Manage racking inspections and upkeep, plus trash and cardboard compactors, • Advise on and track energy efficiency and sustainability initiatives Powered industrial trucks (PIT) • Own PIT daily safety checks, preventative maintenance, and operator training and certification at both sites Refrigeration co-management (Clifton) • Partner with the Chief Refrigeration Engineer on the ammonia freezer and glycol cooler systems, covering compliance, PM scheduling, budget and vendor coordination Security and team leadership • Manage the security function and the facility/maintenance team at both sites, including staffing, training and performance, • Train warehouse staff and supervisors on facility SOPs, PIT certification and emergency action procedures Emergency response • Respond quickly to alarms, system failures, shutdowns and emergencies at either site, including off-hours, • Maintain plans that reduce the impact of natural disasters and other disruptions Vendors and budget • Procure bids, negotiate and review service contracts, and manage providers across both sites, • Prepare and track facility budgets, expenses and maintenance costs; report regularly and drive cost-reduction initiatives Qualifications • Bachelor's degree in Facilities Management, Facilities Engineering or related qualification such as project management, business management or construction management, or equivalent experience, • 5+ years of work experience in a warehouse management role, • Experience leading a security function and a facility/maintenance team, • Working knowledge of OSHA safety, HazMat protocols and environmental compliance, including familiarity with OSHA PSM and EPA RMP for ammonia facilities, • Experience running PIT programs: daily safety checks, preventative maintenance, and operator training and certification, • Facility services experience across security, fire, janitorial and equipment maintenance, • Strong electrical and mechanical troubleshooting skills for general facility systems, • Experience managing facility budgets, contracts and vendors across multiple sites, • Ability to partner well with technical specialists on systems outside your direct scope, • Excellent organization, attention to detail, reporting and communication skills, • Proficiency with Microsoft Office and Google Workspace, • Ability to lift up to 50 lbs, climb ladders and work in cold/freezer environments, • Availability to respond to emergencies 24/7 when requiredNice to have, • Working knowledge of ammonia refrigeration and/or glycol cooler systems, • HazMat Responder certification, • OSHA or Food Safety certification, • Six Sigma (Green Belt) or project management certification Benefits • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • Monthly Weee! Points credits Compensation Range • The US base salary range for this full-time position is $97,000 - $114,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers #INDWH Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology — video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you’re an installation technician, service technician, engineer, or project manager, you’ll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal—build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal is looking to hire a Solution Engineer. The Solution Engineer creates all post-sale security systems design, engineering, value engineering and documentation. The position is part of the Solutions Engineering department, which is responsible for translating, expanding, finalizing and documenting pre-sales proposals and technical designs produced by Sales and Solutions Architecture in pre-sale systems architecting and quoting. This position works closely with Sales, Solutions Architecture, Operations, and external customers as required. The primary work products for the Solution Engineer are security system and construction technical drawings, including custom installation drawings and instructions, network design diagrams, riser diagrams, typical installation diagrams, point-to-point system schedules, door hardware schedules, document redlining, functional narratives describing systems operations and as-built documentation. RESPONSIBILITIES: • Creates and updates comprehensive post-sale engineering packages illustrating device locations, IDF/MDF room layouts, SOC/GSOC layouts, console designs, installation diagrams, riser diagrams, network designs, etc., • Creates and updates performance-based and product-based specifications., • Creates and updates pre-fabrication submittal packages as specified by architects and engineers for their approval prior to installation., • Develops and maintains as-built record documentation over the life-cycle of various projects and follow-on MAC work., • Utilizes and contributes to comprehensive library of standard post-sale engineering documents, templates and standards, as well as project-specific and customer-specific submittals., • Ensures effective value engineering by assuring technical compliance while at the same time reducing Allied Universal Technology Services costs whenever possible., • Reviews AUTS proposals both pre-sale and post-sale to scrutinize selected products for applicability and specification compliance., • Collaborates with AUTS’s product suppliers to ensure the desired functionality of selected products., • Consistently applies AUTS’s standards for installation., • Contributes to AUTS internal guidelines for Solutions Engineering engagement and post-sale systems engineering. QUALIFICATIONS: • Ability to collaborate with diverse teams of technical designers and engineers., • Ability to simultaneously work on multiple large, complex projects., • Good written and verbal communication skills., • Strong analytical decision-making capabilities., • Self-motivated with the ability to influence others., • Electronic security systems design / engineering experience: 5+ Years., • In-depth knowledge of security system design best practices and product applicability including products like:, • Video surveillance and related technologies (Analog, IP, Codecs, VMS), • Access control and related technologies (card access, biometrics, PIV, FIPS-201, HSPD-12, various processor panels, electric locking hardware ,etc.), • Physical intrusion detection (Bosch, DMP, etc), • Physical Security Information Management (PSIM), • Software House, Lenel, Amag, RS2, DSX and Open Options systems architectures., • Computer software skills to include: AutoCAD and associated rendering applications, MS Office, Acrobat writer and Visio., • Ability to read and understand complex architectural and engineering drawings., • Working knowledge of AC and DC circuitry, voltage drop calculations and wire sizing., • A bachelor's or associate's degree in electrical engineering or equivalent is considered a plus., • Ability to plan, size and design enterprise-class IT network and storage solutions including products like:, • Virtualization technologies such as VMware vSphere and View, • Data-center networking technologies such as Cisco Nexus, • Storage Area Network technologies such as NetApp or EMC, • Load balancing / firewalling technologies such as Cisco ACE or Cisco ASA, • Data-center protocols such as Fibre Channel, NFS, IP, iSCSI, DCE BENEFITS: • Salary range: $95,000 - $110,000 annual, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1739778

Job Description About the Company & Role Our client is a leading global consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Senior Cost Engineer for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Senior Cost Engineer, you will play a pivotal role in the financial management, cost estimating, and budget control of the Hudson Tunnel Project. This position is responsible for supporting project delivery through rigorous cost analysis, forecasting, reporting, and change management. The Senior Cost Engineer will collaborate with project managers, engineers, contractors, and stakeholders to ensure the project remains on budget and meets all financial performance targets. This is a fantastic opportunity to be part of a mission that aligns with our client's purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities: • Cost Estimating & Analysis, • Prepare and review independent cost estimates for procurements and project needs., • Analyze contractor price proposals, change order estimates, and claims., • Validate and recommend approval, amendment, or rejection of contractor cost submissions., • Budget Management & Forecasting, • Implement cost and budget management requirements in alignment with the Hudson Tunnel Project Management Plan (HTP PMP)., • Track, forecast, and report on all contract changes, allowances, and budget impacts., • Develop and implement supplemental metrics, procedures, and processes for effective cost management., • Project Controls & Reporting, • Support project controls, including schedule management and risk assessment related to cost., • Update risk registers and assessment reports for contingency planning., • Contribute to daily, monthly, and quarterly reporting on project status, progress, and financial compliance., • Change Management, • Assist in reviewing and managing all project contract, cost, schedule, risk, and environmental impact changes., • Coordinate changes to designs and contract documentation, ensuring proper financial tracking., • Supply Chain & Market Analysis, • Advise on impacts to project costs related to supply chain market conditions and fluctuations in commodities, materials, and equipment., • Document & Records Control, • Ensure accurate tracking, storage, and retrieval of cost-related documents and records., • Support document control processes for financial documentation., • Dispute & Conflict Resolution, • Provide technical support for disputes and conflict resolution proceedings related to cost, schedule, and other project issues., • Compliance & Audit, • Ensure compliance with Federal, state, and local funding requirements, including grants administration and reporting., • Participate in audits and reviews to confirm adherence to project controls and financial standards. Qualifications: • Bachelor's degree in Engineering, Construction Management, Finance, or related field., • 7+ years of experience in cost engineering, estimating, or project controls for large infrastructure or transportation projects., • Strong knowledge of cost estimating methodologies, budget management, and financial reporting., • Familiarity with project management plans, contract administration, and change management processes., • Proficiency in cost management software and tools., • Excellent analytical, communication, and organizational skills., • Ability to work collaboratively in both office and field environments. The estimated starting salary for this position is $140k-$170k. Starting salary may vary based on permissible, non-discriminatory factors such as experience, skills and qualifications. This is an excellent opportunity for a Senior Cost Engineer looking to work on the most challenging, high-profile and innovative projects. If you're an ambitious professional who thrives in a client-facing role and enjoys delivering solutions that drive project success, we encourage you to apply. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status.

Job Description Job Title: Site Engineer Team: Critical Technologies- Operations Reports To: Critical Technologies Technical Manager or Assistant Technical Manager Office Location: Project Site Based Travel Requirement: 75-100% Travel Requirement Company Vehicle Operations Requirement: Must be able to drive company vehicle Safety Training Requirement: Site Safety trained and HSI Safety enrollment. Typical Work Hours: Monday- Friday 7am-4pm Remote Work: Non-remote unless otherwise determined by management Job Description The Site Engineer is responsible for ensuring functional system performance, accurate documentation, compliance with safety standards, and effective coordination among project stakeholders. This role requires a combination of technical knowledge of BAS and PLC based control systems along with project management skills. They will manage project schedules, mitigate risks, and provide on-site support for programming, field integration, and overall project documentation. Key Responsibilities • Understands project requirements, sequence of operation, programming, and system types., • Ensures proper system operability by assisting in onsite performance verification to confirm system functionality., • Maintains project documentation by updating wiring diagrams, sequence changes, DDC and PLC programs, HMIs, and displays., • Maintains commissioning documentation and collaborates with the programming team for accurate documentation to ensure complete project closeout., • Develop and maintain project plans using Smartsheet, MS Project, Procore, CX Alloy (or similar platforms), including setting up progress dashboards, automated workflows, and performance reports to track milestones and deliverables., • Facilitates communication among project stakeholders to ensure project milestones are met., • Generate analytical reports summarizing project metrics, financial data, and performance to support decision-making by stakeholders., • Monitor project performance to identify risks, forecast potential delays or budget impacts, and implement timely corrective actions to keep projects on track., • Manage building automation and construction projects from initiation through closeout, ensuring scope, schedule, and budget objectives are met while coordinating subcontractors and internal teams., • Assists with field level integrations by staying current with integrations platforms like ModBus, BACnet, LON, OPC, and related software. (i.e. Tridium, Fieldserver, ModScan, Wire Shark., • Conducts site visits and work with specialized field teams to monitor progress and resolve any technical issues., • Safety training in accordance with requirements., • Proper adherence to PPE requirements and maintenance of if PPE is issued, and tasks require its use., • Additional requests and requirements as determined by HBT/CT management relevant to the role. Qualifications • Bachelor’s degree in Construction Management, Engineering, Business, Data Analytics or related field required., • Experience managing construction or building automation/controls projects with responsibility for scope, schedule, budget, and subcontractor management., • Strong familiarity with electrical and mechanical installation practices and commissioning processes in a building technologies environment., • Proficiency with Smartsheet (or similar project management platforms), including building and managing complex project plans, reports, dashboards, and automated workflows., • Demonstrated ability to use project data and analytics to manage risk, forecast outcomes, and drive corrective actions., • Strong organizational, communication, and leadership skills, with the ability to coordinate multiple stakeholders and prioritize tasks across several active projects., • OSHA 30 certification (or ability to obtain within a defined timeframe)., • Willingness and ability to travel up to 75% to job sites and customer locations, including support for high‑profile clients across multiple regions., • A proactive, mentorship‑oriented mindset with a commitment to safety, quality, and continuous improvement., • The employee is responsible for performing all assigned duties in alignment with the metrics and key performance indicators (KPIs) established for this position, and for routinely monitoring, documenting, and reporting performance against these measures to ensure ongoing compliance with organizational standards. Benefits of working at the Hoffman Family of Companies: We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. In addition to an ESOP, we offer medical, dental, vision, life insurance and PTO! No phone calls please. EEO Employer/Vets/Disabled

Job Description RVE (an Ardurra company) is seeking a Mechanical Engineer (MEP) – Facilities to join our team in Secaucus, NJ. Maintaining and upgrading buildings poses an ongoing challenge for clients who need to keep their facilities and systems operating safely, reliably and cost-effectively. The foundation of our design approach is energy savings, including finding alternative energy sources when viable. Our professionals bring together engineering and strong economic and management principles to design and upgrade heating, air conditioning, ventilation and other systems for our K-12, higher education, healthcare, hospitality and industrial clients as part of new construction or renovation projects. Our staff has expertise in wind, solar, geothermal and combined heat and power (cogeneration) technologies. We also provide professional program management, facility wide energy audits and analysis, assessments, design, construction management and administration services for public transportation infrastructure to numerous transportation authorities and serve as Engineer of Record for nearly 50 Boards of Education in New Jersey and Pennsylvania. Primary Function: The ideal candidate for this position will oversee projects from concept through construction, mentoring junior staff, and playing a key role in delivering high-quality engineering services for educational, commercial, and industrial facilities The ideal candidate will have approximately 5 to 15 years of experience in design of HVAC, plumbing, and fire protection systems, including fire alarm. Primary Duties: • Support the design of HVAC, plumbing, and fire protection systems, including fire alarm systems, for commercial, industrial, and educational projects, • Perform and review mechanical calculations, equipment selections, and system layouts, • Oversee hydronic (chilled and hot water) piping design, ductwork, and mechanical equipment sizing, • Develop and manage project schedules, deliverables, and client expectations, • Ensure quality and accuracy of construction documents, including drawings, specifications, and calculations, • Coordinate with cross-discipline teams, architects, and clients, • Mentor and guide junior engineers and designers, providing technical oversight and career development support, • Perform site visits and field surveys when required, • Assist in proposal development and contribute to department growth initiatives Education and Experience Requirements: • Bachelor’s degree in mechanical engineering or a related discipline required., • PE license required or the ability to pursue one., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products. Salary Range: $92,000.00 To $151,800.00 Annually Benefits: Medical, dental, vision, 401(k), Paid Time Off Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HM1

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: You will develop PLC-based and hardwired control systems for personnel access, equipment permissives, interlocks, and protective shutdown functions. Your work will span requirements, electrical and software design, hardware integration, testing, commissioning, and operational support. You will collaborate with controls engineers, subsystem owners, physics, operations, and safety specialists to implement and verify the required protective functions. As Eos advances through design and into construction, you will contribute reusable PLC software, electrical designs, interface specifications, and test methods that support consistent implementation across plant systems. This is a hands-on engineering role requiring strong controls development and troubleshooting skills, practical experience with safety-rated hardware, and sound judgment in applying functional safety requirements. Key Responsibility Areas: • Develop control architectures for safety and interlock systems, including personnel access, emergency shutdown, and interfaces with subsystem controls and machine protection. Work with system owners to define signal interfaces and the required independence between safety functions, normal plant control, and equipment protection., • Translate approved safety and operational requirements into control specifications, functional descriptions, cause-and-effect matrices, I/O lists, and interface control documents. Maintain traceability between requirements, hardware and software implementation, and test results., • Participate in hazard and design reviews with system owners and safety specialists. Provide controls expertise to identify failure modes, evaluate proposed protective actions, and translate risk assessment findings into implementable control functions., • Work with safety specialists to establish the integrity and performance requirements applicable to each control function. Implement and document safe states, response times, diagnostics, fault handling, reset conditions, and provisions for proof testing in the hardware and software design., • Select and integrate safety PLCs, safety-rated I/O, hardwired circuits, and communications appropriate to the specified functions. Evaluate fault behavior, common-cause vulnerabilities, maintainability, and availability when developing control architectures., • Design personnel access and exclusion systems, including controlled zones, search-and-secure sequences, trapped-key interlocks, door monitoring, emergency stops, warning systems, and prevention of unexpected restart., • Implement interlock and shutdown controls for systems involving high voltage, high current and stored energy, superconducting magnets, RF and neutral beam heating, radiation-generating equipment, cryogenics, oxygen deficiency monitoring, and hazardous gases, working with the responsible technical and safety specialists., • Define coordinated trip, inhibit, isolation, and shutdown sequences across plant systems. Ensure that protective actions account for stored energy and preserve cooling, ventilation, monitoring, or other services required to reach and maintain a safe state., • Coordinate interfaces with magnet quench protection, power supply protection, radiation monitoring, gas detection, and facility emergency systems. Define ownership, signal integrity, response timing, and fault behavior at each interface., • Specify behavior across operating modes and transitions, including preparation, energization, plasma operation, shutdown, maintenance, and fault recovery. Establish controlled provisions for commissioning overrides, bypasses, and inhibited functions., • Produce and review electrical schematics, safety loop diagrams, panel designs, I/O schedules, cable and grounding requirements, equipment specifications, and installation work packages using EPLAN or comparable tools., • Develop, document, and test safety PLC application software and configuration using approved platform tools and IEC 61131-3 languages. Establish reusable function blocks, coding practices, version control, and controlled release processes., • Specify and integrate safety-rated sensors, switches, relays, final elements, power supplies, and communications. Evaluate the complete sensor-to-final-element chain, including component suitability and failure modes., • Integrate status, alarms, first-out trip information, and diagnostics with the supervisory control system while preserving the integrity and independence of the safety functions. Design operator interactions that support clear decisions and safe recovery., • Develop and execute hardware and software verification plans, factory and site acceptance tests, integration tests, and commissioning procedures. Provide test results and configuration records to support independent validation and safety reviews as required., • Define technical work packages and acceptance criteria; review supplier designs and test evidence; and coordinate implementation with vendors, integrators, and internal system owners.Required Qualifications:, • Bachelor's degree in electrical engineering, controls engineering, automation, or a related technical discipline, or equivalent relevant professional experience., • Typically 8 or more years of relevant controls or electrical engineering experience, including hands-on design, programming, integration, and commissioning of PLC-based control systems with safety or interlock functions., • Demonstrated experience delivering controls for personnel access, interlocks, or protective shutdown systems in fusion facilities, particle accelerators, synchrotrons, spallation sources, or comparable large scientific facilities., • Practical understanding of functional safety requirements and experience applying IEC 61508, IEC 61511, IEC 62061, or ISO 13849, as relevant, to control hardware, application software, and verification activities., • Hands-on experience programming, integrating, and validating safety PLCs, safety-rated I/O, interlock circuits, and field devices. Experience with Rockwell Automation GuardLogix, Siemens SIMATIC F systems, or comparable platforms., • Ability to translate functional and safety requirements into electrical designs, PLC logic, and measurable acceptance criteria, with documented traceability and configuration control., • Experience designing personnel access controls, emergency shutdown functions, and safe interfaces to hazardous equipment or processes., • Strong electrical design and troubleshooting skills, including schematic development, control panel integration, instrumentation, and testing of complete safety loops., • Experience with system integration, commissioning, functional testing, and maintenance or proof testing of safety systems in an operating facility., • Ability to resolve control system interface issues across disciplines, explain design tradeoffs clearly, and produce electrical, software, and test documentation suitable for engineering reviews.Preferred Qualifications:, • Direct experience with fusion plant safety controls, superconducting magnets, high-energy power systems, RF heating, neutral beam systems, or radiation-generating equipment., • Experience integrating radiation protection, oxygen deficiency monitoring, gas detection, laser safety, or cryogenic safety systems into a facility safety architecture., • Experience supporting reliability or safety integrity assessments through hardware failure analysis, diagnostic implementation, response-time evaluation, and proof-test design., • Familiarity with applicable US electrical and machinery safety practices and standards, such as NFPA 70, NFPA 70E, and NFPA 79, and experience working with safety and compliance specialists to define the project requirements., • Experience with EPLAN or comparable electrical design software, PLC development environments, requirements and configuration management tools, and interfaces to SCADA or scientific control environments such as EPICS., • Functional safety training or certification, such as CFSE, CFSP, or a recognized functional safety engineer qualification, particularly where applied to PLC-based control system implementation.Company Benefits:, • Salary Range: $180,000 - $230,000 per year, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPosition Overview Armand Corporation is seeking an experienced Structural Engineer (PE License) to support the Port Authority of New York and New Jersey's Engineering Department, Quality Assurance Division, Design Standards Unit. The selected candidate will be responsible for reviewing structural and geotechnical design documents for Tenant Alteration Applications (TAA) and design audit projects involving Port Authority facilities. This position focuses on ensuring compliance with applicable building codes, engineering standards, and Port Authority technical requirements. The successful candidate will work closely with engineering disciplines, project stakeholders, and Port Authority personnel to facilitate timely and accurate design reviews. Work may be performed onsite and/or remotely, as directed by the client. Key Responsibilities • Review structural and geotechnical design submissions for compliance with applicable building codes and Port Authority technical standards., • Evaluate engineering drawings, structural/geotechnical calculations, specifications, technical reports, and supporting documentation., • Review Tenant Alteration Applications (TAA) and design audit submissions for completeness and technical compliance., • Identify design deficiencies, code discrepancies, and areas requiring clarification or corrective action., • Coordinate review comments with other engineering and technical disciplines., • Prepare technical memoranda documenting review findings and recommendations., • Participate in meetings with tenant architects, engineers of record, and other stakeholders to resolve technical comments., • Coordinate the assignment of technical disciplines for multidisciplinary code reviews., • Communicate with Port Authority facilities and internal departments to facilitate the review and approval process., • Maintain accurate review records and support efficient processing of design submissions.Minimum Qualifications, • Bachelor's degree in Civil Engineering with a structural engineering concentration or equivalent civil-structural engineering education., • Active Professional Engineer (PE) license in New York and/or New Jersey — required., • Minimum five (5) years of diverse professional experience involving building structural/geotechnical codes, systems, and engineering practices., • Strong understanding of structural and geotechnical engineering principles as they relate to the design and construction of transportation facilities and related buildings., • Experience reviewing engineering drawings, calculations, specifications, and technical reports., • Excellent written and verbal communication skills, including the ability to prepare technical review comments and coordinate with multidisciplinary teams., • Ability to communicate effectively with tenants, facility representatives, engineers, and internal technical reviewers., • Proficiency in Microsoft Office and ability to learn document management and engineering review platforms, including SharePoint, Trimble, and e-Builder.Preferred Qualifications, • Experience supporting transportation agencies, public infrastructure owners, or large institutional facilities., • Familiarity with building code compliance reviews, design quality assurance, or technical design audits., • Experience coordinating multidisciplinary engineering reviews., • Previous experience with tenant alteration or facility modification projects.About Armand Corporation Armand Corporation is a construction and program management consulting firm providing professional services in support of public infrastructure and capital improvement projects. Armand Corporation is an Equal Opportunity Employer. We consider qualified applicants without regard to legally protected characteristics. Powered by JazzHR rH6iwoJsiy

Job Description Evergreen Opportunity: We are continuously accepting applications for this role for potential future openings. We will be reviewing, interviewing and hiring for this role on a rolling basis. About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through aligning their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and NYC Metro Area, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors’ schedule, to include night work, weekends, and holidays. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • 1 to 3 years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver’s license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • NJSAT, ACI Grade-I and TCC/TCP Certifications., • NICET I or II certification in transportation/highway and bridge construction is highly preferred., • Will be required to be obtained NICET certification within 6 months of employment (if not actively held) What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Holidays: 11 Federal Holidays (88 Hours) observed in accordance with mcfa's Holiday Schedule "mcfa way" Bonus Program: • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Growth Unit allotment may increase over time. Healthcare & Insurance: • Eligible to participate in mcfa’s family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities.

Job Description About the Company & Project Our client is a leading global Consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Project Engineer for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Project Engineer, you will play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our client's purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Assist with design reviews, resolve technical issues, and coordinate design change documentation., • Provide technical support during construction, review contractor submittals, and monitor progress against milestones., • Facilitate communication among stakeholders, schedule meetings, and assist with project documentation, including drawings and specifications., • Provide opinions on constructability, means and methods, and the impacts of technical decisions on the overall project, including analysis of critical path schedule impacts and scenario analyses., • Support the integration and coordination of all HTP Packages, ensuring comprehensive interface management and collaboration among design, construction, and operations teams., • Assist with programmatic oversight and management of project controls functions, including schedule, cost, change, risk, and document management., • Update project controls procedures, workflow processes, and tools as requested., • Prepare and submit monthly and quarterly project reports, including safety, quality, environmental, and milestone status updates., • Maintain a lessons learned register and master issues log for the HTP., • Support implementation and monitoring of the HTP Project Management Plan (PMP), Quality Management Plan (QMP), and other federally required plans., • Ensure compliance with applicable federal, state, and local regulations, including NJDEP, NEPA, USACE, Section 106, and County or Municipal agencies permitting requirements., • Assist with quality assurance activities, including witnessing testing, periodic audits, and ensuring compliance with technical specifications and contract requirements. Qualifications • Bachelor's degree in Civil Engineering or related field., • 3–7 years of experience in civil engineering, preferably on large infrastructure or transportation projects., • Roadway engineering skills such as geometric design, grading, access management, permitting, utilities, stormwater management, roadway drainage design, 3D roadway modeling, traffic/accident analysis and traffic control and staging plans., • Familiarity with project controls, scheduling, cost management, and risk management., • Knowledge of federal, state, and local regulations relevant to major capital projects (NJDOT, NJDEP, NEPA, USACE, Section 106, County or Municipal agencies, etc.)., • Experience with quality assurance, construction monitoring, and technical documentation., • Proficiency with BIM, AutoCAD, MicroStation, PMIS, and Microsoft Office Suite., • Strong communication, organizational, and problem-solving skills., • Ability to work collaboratively with multidisciplinary teams and external stakeholders. The estimated starting salary for this position is $140k. Starting salary may vary based on permissible, non-discriminatory factors such as experience, skills and qualifications. This is an excellent opportunity for a Project Engineer looking to work on the most challenging, high-profile and innovative projects. If you're an ambitious professional who thrives in a client-facing role and enjoys delivering solutions that drive project success, we encourage you to apply. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k). Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status.