Trabajos construction inspector en Cicero, New YorkCrear alertas

A nationwide construction firm is seeking a Senior Roadway and Bridge Construction Inspector for a travel-intensive role.

We're looking for an experienced and collaborative Superintendent based in Albany, NY, who thrives when people are in sync and construction projects are running like they should. Assistant Superintendent or Inspector on large-scale, multi-contract building projects. Demonstrated working knowledge of

Qualified candidates will fill Construction Inspector (NICET II), Senior Inspector (NICET III), Chief Inspector (NICET IV), and Office Engineer (NICET III/IV) positions, in NYSDOT Regions 1, 3 and 9 along with local municipalities throughout New York. INFRA TECH ENGINEERING is currently seeking tran

Join our team as a Construction Inspector, providing essential inspections and material testing on high-profile commercial projects throughout the Greater Syracuse, NY area. Must possess at least one International Code Council (ICC) Certification for one of the following Special Inspector Categories

CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative

If you are a team player with a passion to drive your career in Construction Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Transportation Construction Inspector - NICET I to add to our growing and talented team. The role is suitable for individuals interested in gaining

Construction Inspector, Construction Foreman, Construction Manager, Commercial Construction, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer,

If you are a team player with a passion to drive your career in Construction Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Transportation Construction Inspector - NICET I to add to our growing and talented team. As a TCI, you will work on construction projects across di

M&J Engineering is seeking Construction Inspectors to support NYSDOT and NYSTA highway and bridge projects, facilities and buildings, rail and transit infrastructure, and municipal capital projects. Inspection, Quality and Compliance• Inspect and verify construction work for compliance with plans,

Plumbing Inspector II is to be distinguished from Plumbing Inspector I in that an employee in this class reviews plumbing plans and specifications for new construction to determine the type of plumbing installations to be inspected; researches and indicates sewer lateral connections, reviews all wor

If you are a team player with a passion to drive your career in Construction Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Transportation Construction Inspector - NICET II to add to our growing and talented team. This opportunity entails engaging in TCI work on diverse

NorthEast Transportation Technician Certification Program (NETTCP) - Soils and Aggregate Inspector Certification a plus. We have an immediate need for a Construction Inspector NICET Level II, III or IV located in Syracuse, NY. Our Resident Engineer Inspection division has a need for on-site NICET In

If you are a team player with a passion to drive your career in Construction Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Senior Transportation Construction Inspector - NICET III to add to our growing and talented team. We are actively searching for highly skilled and

If you are a team player with a passion to drive your career in Construction Inspection, Popli Design Group (PDG) is the place for you! PDG is seeking a Senior Transportation Construction Inspector - NICET III to add to our growing and talented team. Lead a team of junior inspectors working to Inspe

At Jacobs, we're not just building structures, we're helping our clients innovate and grow by designing, engineering, and executing the construction of their state-of-the-art facilities that are changing our world. We're looking for an experienced and collaborative Superintendent based in Albany, NY

Qualified candidates will fill Construction Inspector (NICET II), Senior Inspector (NICET III), Chief Inspector (NICET IV), and Office Engineer (NICET III/IV) positions, in NYSDOT Regions 1, 3 and 9 along with local municipalities throughout New York. INFRA TECH ENGINEERING is currently seeking tran

CDM Smith's Construction Engineering and Inspection (CEI) team is seeking a Senior Roadway and Bridge Construction Inspector for a dynamic, travel-intensive role. The CEI Senior Roadway and Bridge Construction Inspector will inspect and monitor construction activities at the project site(s). Perform

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Construction Inspector, providing essential inspections and material testing on high-profile commercial projects throughout the Greater Syracuse, NY area. Help ensure compliance on some of the regions most exciting construction sites. Responsibilities • Perform tests and inspections for soils, concrete, asphalt, reinforced concrete, masonry, welding & bolting, fireproofing & firestopping, geotechnical investigations, and more., • Read construction drawings and specifications and correctly interpret test results., • Complete assignment accurately and in accordance with appropriate established standards., • Record and report test results in a clear, concise manner., • Communicate regularly with project managers., • Complete field data records and associated reports daily., • Prepare for and complete continuing education for certifications through the American Concrete Institute (ACI) and International Code Council (ICC). Qualifications, • HS Diploma required., • Degree in Civil Engineering / Technology, Geology, or related is ideal, although necessary., • Must possess at least one International Code Council (ICC) Certification for one of the following Special Inspector Categories: reinforced concrete, soils, masonry, spray applied fireproofing, steel & bolt or steel & weld, or American Concrete Institute (ACI) Grade 1, or Engineer-in-Training (EIT) Certificate through a State Board., • Ability to maintain effective working relationships with managers, teammates, and clients, through clear communications and proactive progress reporting. Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job DescriptionDescription: At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're seeking experienced Construction Special Inspectors to join our team! As a Construction Special Inspector, you'll have the opportunity for professional growth and advancement with competitive pay. Construction Special Inspector Perks & Benefits: • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Variety in daily work assignments, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Desire any of the following certifications with related experience: ACI, ICC, PCI, CWI, NETTCP, NYSDOT DTI, NYSDOT PCC, NYSDOT QC/QA and NICET, • Able to lift, carry, push, and pull equipment weighing up to 50 pounds, • Basic math and good communication skills, • Possession of a valid New York State driver’s license, • Positive attitude, with ability to work independently and in a team environment, • Provide Special Inspection services in accordance with the Building Code of NYS, • Perform quality sampling, testing and inspection of soil, concrete, masonry, and asphalt materials on construction sites and in laboratory settings, • Follow safety standards and procedures, • Prepare accurate test and inspection reports using electronic report templates

Job DescriptionDescription: Advance Testing Company, a SOCOTEC Company, is currently seeking a Senior Construction Materials Testing Technician Advance Testing Company, an established New York-based construction materials testing and inspection firm with several offices throughout the Northeast, has an opportunity available for a Senior Construction Materials Testing Technician. The position would be based out of Advance Testing's East Syracuse, NY office. Advance Testing Company performs testing and inspection of materials such as soils, aggregates, concrete, masonry, reinforcing steel, asphalt, fireproofing and firestopping. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. RESPONSIBLITIES • Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications., • Perform standard testing of materials., • Prepare samples of materials for laboratory testing., • Examine workmanship of installations for conformity to specifications., • Maintain daily log of construction and inspection activities and complete clear, accurate reports daily., • Prepare sketches of construction installations that correlate with testing and inspection sites., • Other related duties may be assigned. Requirements: QUALIFICATIONS • High school diploma or equivalent, • 1+ years of construction materials testing, • OSHA 10 or 30, • Nuclear Density Certification o NETTCP soils & aggregate or similar o NETTCP Plant o NETTCP Paving o NYS QCQA o NYS Density Testing Inspector o NECETP Field o NECETP Plant 1 or 2 o NJSAT Construction Technologist o NJSAT Plant 1 or 2 • Strong focus on safe work practices and adherence to all safety protocols, • Must be detail oriented and able to work independently, • Must be able to travel and to perform site visits, • Requires a valid, clean driver’s license In addition to providing competitive experience and qualification-driven salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: • Comprehensive group medical insurance, including health, prescription, dental, vision, • Flexible spending accounts for medical expenses and dependent care, • Company paid offset to out-of-pocket health insurance and prescription costs, • Opportunities for professional growth and advancement, • Paid time off and sick days, • Company–observed paid holidays, • Paid training and certification, • AFLAC Plans including short and long-term disability coverage, life insurance, et al. We are an equal opportunity/affirmative action employer and highly encourage resumes from all interested parties including women, minorities, veterans and persons with disabilities. All qualified applicants will be afforded equal employment opportunities without discrimination on the basis of race, creed, color, national origin, sex, age, disability, marital status, or any other protected class. Advance Testing Company, Inc. participates in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States.

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: • Competitive Pay, • Competitive Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Company vehicle for travel to project sites, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Strong written and verbal communication skills, • Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations., • Proficient in Microsoft Office, • Ability to work with AWS & AISC codes, • Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State., • Perform special inspections in accordance with the applicable building code requirements., • Review project plans and specifications., • Review and perform welding procedure and performance qualification testing.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Performs routine construction inspection services under the supervision of a Senior Inspector, Chief Inspector or Resident Engineer., • Duties include taking and documenting detailed measurements for payments, supervising material testing, and notifying supervisor of issues and potential deviations from plans and specifications., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. The skills to demonstrate a basic familiarity with various common job site conditions, communication of project requirements to a contractor, and the ability to maintain a daily report while being familiar with plans and specifications are necessary. Applicants must have the ability to know when issues must be elevated to a supervisor., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Some relevant construction observation experience is preferred., • NICET Level II certification is preferred, or candidate must have a desire to pursue certification during term of employment. Estimated Compensation Range: $58,240 - 79,040/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Transportation Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

An experienced AMPP, SSPC, or NACE certified Coatings Inspector is needed for a NYS Thruway Authority bridge painting construction project in 2026. Under the direction and supervision of the Resident Engineer, the Coatings Inspector will oversee daily work operations of the contractor to ensure that

Job DescriptionDescription: Are you an experienced Senior Environmental Specialist with expertise in asbestos, lead-based paint, PCB, and mold investigations? This is your opportunity to lead complex environmental projects from hazardous building materials assessments through abatement design and construction administration. You’ll develop detailed abatement plans and technical specifications, support regulatory compliance, review contractor documentation, respond to RFIs, and coordinate directly with clients and agencies—owning projects from investigation through successful project completion. If you’re ready to expand your technical leadership, take on high-impact environmental remediation work, and make a meaningful impact on public health and safety, we encourage you to apply today and take the next step in your environmental career. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do • Plan and implement regulated hazardous building materials surveys for renovation and demolition projects, including asbestos, lead-based paint, PCB-caulk, mold, and other hazardous and universal wastes., • Conduct bulk sampling, homogeneous area assessments, data analysis, quantification, and prepare detailed survey reports and sampling location plans., • Develop project-specific asbestos and hazardous materials abatement plans and associated technical specifications in compliance with OSHA, EPA, AHERA, NESHAP, TSCA, ICR 56, and other applicable federal, state, and local regulations., • Adhere to the project scheduling requirements for schematic design, design development, construction and bid document submittals., • Prepare hazardous waste management plans aligned with federal, state, and local regulations and requirements, including 6 NYCRR Parts 360, 364, and 370–373., • Serve as technical lead for major project phases, applying independent judgment in regulatory interpretation and problem resolution., • Provide construction administration support, including submittal review, request for information responses, contractor coordination, and regulatory agency communication., • Manage project scope, budgets, schedules, and deliverables to ensure quality, compliance, and client satisfaction., • Support proposal development, cost estimating, and business development initiatives., • Bachelor’s degree in Environmental Science, Environmental Engineering, Construction Management, or related field with 5+ years of experience in hazardous building materials, environmental compliance, or asbestos consulting., • Active OSHA 40-Hour HAZWOPER (with a current annual 8-Hour refresher) and valid NYS driver’s license., • NYSDOL-Certified Asbestos Building Inspector and Asbestos Project Designer required., • Additional certifications preferred: USEPA Lead Inspector and Risk Assessor, NYSDOL Article 32 Mold Assessor, Asbestos Project Monitor, and NYSDOH Radioactive Materials License (XRF)., • Experience preparing Hazardous Waste Management Plans and interpreting federal/NYS regulations., • Proficiency with MS Office, AutoCAD, Revit, Survey123, and the ability to read architectural renovation and demolition drawings with knowledge of building systems (HVAC, mechanical, plumbing, electrical, insulation, and building materials)., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. We offer competitive salaries and benefits, including: Medical, Dental & Vision Insurance • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security The physical demands listed are required to perform the essential functions of this role. Reasonable accommodation may be provided in accordance with applicable law. • Ability to lift up to 25 lbs., traverse uneven terrain, and stand or walk for extended periods., • Ability to travel to and access project and construction sites, including working at heights (ladders, scaffolding, lifts, rooftops) and entering containment areas using proper fall protection and safety procedures., • Ability to follow Job Safety Analyses (JSAs) and Health & Safety Plans, and properly use required PPE, including respirators, Tyvek suits, gloves, hard hats, eye/hearing protection, and steel-toe boots., • Ability to work in office, field, and construction environments with exposure to dust, noise, fumes, temperature extremes, heights, and inclement weather., • Ability to pass annual physicals, including respirator fit and pulmonary testing. #LI-Hybrid

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Responsible for inspecting and documenting welds to verify compliance with all contract specifications. Demonstrates a strong attention to detail by accurately interpreting construction plans, documenting findings, preparing reports, and maintaining effective communication with clients. This is a full-time position located in the Syracuse, NY area. Responsibilities • Conduct internal and external inspections to verify that weldments and bolted connections meet the acceptance criteria outlined in applicable codes, standards, and contract documents, • Interpret and apply regulations, codes, and industry standards to support daily testing and inspection activities, • Accurately compile, document, and submit daily inspection reports in a timely manner, • Must possess Certified Welding Inspector Certification through the American Welding Society (AWS CWI), • Knowledge of industry standards including AWS and ASTM required, • Working knowledge of NDT methodologies, a plus, • Possess good interpersonal and communication skills, • Attention to detail and problem-solving skills Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR gtCMOz2BCL