Design engineer jobs in Perth Amboy, New JerseyCreate job alerts

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer. In this role, you will lead the design, analysis, testing, and requirements development and verification of high performance Radar Signal Simulation and Processing systems. The successful candidate will have experience and/or knowledge of Radar Signal Simulation & Processing, MATLAB Simulation Development, Requirements Development and Testing and Model Based System Engineering. This position is located at a facility that requires special access and will require a government security clearance. U.S. Citizenship is required. #REAS Qualifications: • Bachelor's degree in Electrical or Computer Engineering or equivalent technical discipline, • Five or more years of Systems Engineering experience, • Experience developing system and software requirements and associated analysis and testing, • Ability to obtain & maintain a DoD Security Clearance at the SECRET level. U.S. Citizenship is required.

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Electrical Engineer to support multiple programs in the Integrated Warfare Systems & Sensors business. This position requires knowledge of electrical engineering principles, working in a team environment, and general knowledge of other related disciplines. Specific tasking will be but not limited to overall design of launcher electrical systems, including the selection and use of Commercial Off the Shelf components, custom hardware design, and setting requirements for chassis/enclosure design. Responsibilities include: • Support the electrical design sustainment of the MK41 Vertical Launching System and new and exciting designs of the next generation of launcher and weapon systems across various platforms., • Apply electrical engineering and electronics skills and have applicable knowledge of other related disciplines supporting successful design activities., • Coordinate with more senior internal or external personnel on significant technical matters., • Conduct or participate in the design, development, and testing of electronic and electrical components, sub-systems and systems., • Develop technical documentation such as initial design specifications, schematics, assembly drawings and parts list as well as preparing test procedures and reports to ensure customer and company requirements are met. Position is located in Moorestown, NJ. Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Moorestown, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. #rmshotmiljobs #rmslaunchers Qualifications: • Bachelor Degree or higher in Electrical Engineering or other related engineering or scientific field, • Minimum 2 years professional experience, • Experience supporting multi-disciplinary engineering teams in electronic system development, • Working experience in one or more of the following technical areas:, • Electrical System Integration/Development, • Complex Cable Design, • Printed Wiring Board (PWB) Design, • Circuit Card Assembly Design, • Electrical Bonding and Grounding of Enclosures, • FPGA Selection/Programming, • Ability to obtain & maintain a DoD clearance at the SECRET level

SENIOR INFRASTRUCTURE ENGINEER Our technology client seeks a highly experienced and strategic Senior Infrastructure Engineer to join our IT Operations team. In this senior role, you will be a technical authority responsible for the design, stability, and high-level orchestration of our global IT environment. You will lead complex architectural projects, manage high-priority cloud migrations, and serve as the final escalation point for critical technical issues. This is a senior, results-oriented position requiring expert-level technical foresight and a commitment to maintaining enterprise-grade operational excellence. Duties & Responsibilities: •Design, implement, and maintain complex enterprise-scale physical and virtualized infrastructure, ensuring seamless integration between on-premises systems and AWS cloud environments. •Lead the architectural design and governance of VMware technologies, including advanced site recovery orchestration (SRM) to ensure business continuity and automated disaster recovery. •Plan and lead high-stakes upgrades, complex migrations, and long-term capacity expansions based on multi-year business roadmaps. •Oversee the installation, configuration, and expert-level maintenance of Windows, Linux, and IBM MQ servers, establishing the gold standards for performance, security, and high availability. •Drive infrastructure automation initiatives using scripting and configuration management tools to standardize routine maintenance, patching, and resource monitoring. •Provide Tier 3 troubleshooting support to resolve the most complex server and storage-related issues. •Develop and enforce comprehensive infrastructure documentation standards, including architectural blueprints, procedural playbooks, and best practice frameworks. •Perform expert-level IBM MQ administration, including high-level cluster configuration, performance tuning, and global monitoring strategies. •Govern the Microsoft 365 suite and productivity tools, ensuring enterprise-wide security compliance, tenant health, and optimal user experience. •Establish and audit security best practices across all infrastructure layers, ensuring alignment with industry frameworks and internal compliance mandates. •Collaborate with senior application owners and stakeholders to architect optimized system performance and solve systemic technical bottlenecks. •Architect and oversee the deployment of robust, multi-site backup and recovery solutions for virtual machines, NAS, and mission-critical applications. •Define a strategy for regular backup integrity testing and data availability audits to ensure 100% data recoverability. •Architect and govern AWS compute and storage environments, ensuring optimal instance selection (EC2), volume management (EBS/EFS), and S3 lifecycle policies for enterprise workloads. •Lead the design and management of AWS Sandbox and production environments, enforcing infrastructure governance through AWS Organizations and IAM least-privilege resource access. •Orchestrate large-scale migrations of on-premises VMware workloads to AWS, utilizing AWS Application Migration Service (MGN) to ensure minimal downtime and platform stability. •Implement and manage AWS Backup and Disaster Recovery strategies, ensuring cloud-native workloads meet the same RPO/RTO standards as on-premises core servers. •Optimize AWS cloud infrastructure costs by implementing advanced resource monitoring, auto-scaling groups, and strategic instance rightsizing to support the business cost-efficiency goals. •Lead cross-functional IT teams and consult with external clients throughout the infrastructure lifecycle, delivering high-level strategic solutions from initial assessment to change implementation. Requirements & Skills: •Bachelor's Degree or equivalent high-level certifications and 7–10+ years of hands-on experience in enterprise infrastructure administration. •Expert-level mastery in at least four of the following areas: Windows/Linux Server, VMware (including SRM), SAN/NAS Storage, IBM MQ, AWS Infrastructure, and Automation. •Proven ability to architect and govern security best practices and frameworks across hybrid-cloud environments. •Superior troubleshooting and root-cause analysis (RCA) skills with the ability to solve unprecedented and highly complex technical challenges. •Exceptional written and verbal communication skills, with the ability to present complex technical roadmaps and concepts to executive leadership. •Demonstrated ability to lead technical teams, manage high-priority projects, and mentor junior engineers in a fast-paced environment. •ITIL® Intermediate or Expert certification (Preferred). •AWS Certified Solutions Architect – Professional or AWS Certified SysOps Administrator – Associate (Highly Preferred). •Advanced professional certifications such as VCAP (VMware Certified Advanced Professional) or CISSP (Preferred). •Extensive experience architecting and governing AWS compute and storage platforms at an enterprise scale (Preferred). SEND YOUR RESUME TO MENTION JOB 1136 IN THE SUBJECT BOX

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer * Competitive salary * Paid vacation/holidays/sick time - 15 days of vacation first year * Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one * Extensive product and on the job/cross training opportunities With outstanding resources * Encouraging and collaborative team environment * Dedication to safety through our Zero Harm policy * Check us Out: ___ What you will do The Johnson Controls Global Center of Excellence (GCOE) Major Projects team provides pre-sales system and project development engineering services for large complex building projects. We develop and deliver leading building, business and vertical market solutions and engineering expertise driving value for sales partners and customers. The team brings a consultative and service-oriented approach, as well as engineering development discipline through standard processes and tools. Serving all of Johnson Controls’ priority vertical markets and sales channels in North America, the Solution Development Engineer position is an integral part of our digital growth strategy. As a key member of the Solution Development Engineering team, you will partner with some of the best minds in the industry to create innovative solutions focused on customers' needs. You will help deliver on aggressive growth objectives, driving higher product value and margin. Our high-performing team needs you to bring your expertise to complement and further differentiate our industry-leading offerings. The business supports Controls, Fire and Security projects. This position will focus on projects across North America. This is a virtual position but must live within the United States. How you will do it How you will do it Under general direction, leads the pre-sales development process for Johnson Controls Metasys Building Automation System (BAS) solutions, supporting the Above-Region Sales Channels across North America. Project types include new construction plan-spec, existing facility retrofits and design-build opportunities. * Administers the Major Projects project development process for opportunities across North America. Reinforces methodology and skills used to collect, analyze and present solutions, designs, scopes and cost estimates. Provides input to the sales management organization for opportunity prioritization, qualification and requirements for project development. Provides technical sales assistance to opportunities currently in the sales process. Coordinates pre-bid and pre-book estimate reviews and manages the project cost data through the booking process and release to operations meeting. * Provides Johnson Controls Metasys BAS along with other system application support and systems development for the Above Region Sales Channels. Uses available tools to assemble detailed applications for the customer contract, including the project development files associated with Selection Navigator, engineering designs, materials lists, and subcontractor bids as necessary. * Project responsibilities include pre-sales design support, cost development, applications engineering and product selection, specification interpretation and development, electrical subcontractor RFP generation, subcontractor evaluation, proposal development and team coordination, project financial and execution risk management strategies, value engineering, customer satisfaction and project success. * Reviews solution application and cost of work estimate with salesperson and appropriate operations team to get mutual agreement on application. Develops consensus/buy-in from sales and operations teams before presentation to customer. Assists the sales team in communicating JCI’s technical value proposition and presenting BAS solutions to the customer. * Provides scope definition and systems development direction for outside vendors and suppliers, mechanical and electrical subcontractors including scope, terms and conditions, bid forms, and contract reviews. Maintains relationships with key individuals to ensure preferred pricing where possible. * Assist in identifying specification issues or interpretation discrepancies and providing solutions to resolve. Develop system schematics, scope and cost estimate for system installation projects. Works with salesperson to develop understanding of customer requirements, critical areas and needs. Develops common orientation of job scope and details. There may be limited travel to customer sites to perform site-surveys in existing buildings to inspect overall operation of systems and unique job considerations for construction. * Demonstrates ability to design BAS systems for design-build project applications. Develop specifications, system diagrams, and sequence of operations documentation for submission into project documents. Creates integration roadmap and system network architecture using Visio visualization software. * BAS solutions skill set: * Understand the current HVAC and BAS Industry and its future trends of smart building technologies for the following concepts and design: * Knowledge of solution development, design, application and cost estimating for the centralized control and monitoring of connected building systems related to HVAC mechanical systems and electrical systems * Ability to design the system architecture and network as it relates to the BACnet MS/TP, BACnet/IP, Ethernet/IP, IT/OT network BAS sub systems * Experience with critical environment and laboratory control systems * Integration solutions of systems and technologies including Security, Fire and Lighting Controls * Identifying the scope of work associated with miscellaneous control wiring requirements for various mechanical and electrical building sub systems * Experience with cost-effective methods associated with UL-864 code compliance and UUKL Smoke Control Systems * Stays abreast of new BAS technologies as well as integrated BAS solutions. * Participates in ASHRAE (American Society of Heating, Refrigerating Air-Conditioning Engineers) and other relevant professional organizations. * Interfaces with JCI OpenBlue Digital team to define integrated automation and cloud-based analytic software solutions. Participates in customer meetings to identify stakeholder needs and incorporate feedback into design. Participates in vendor coordination meetings to identify and mitigate scope overlaps/gaps. Supports JCI operations team during project turnover meetings and provides technical support during system installation phase. * Performs detailed engineering or cost impact analysis to quantify cost savings or other customer benefits. Assists in technical or financial benchmarking as needed. * Consults with sales and operations team to appropriately assess project financial and execution risk. Makes recommendations to sales team for cost effective solutions to mitigate any identified risk. Regularly updates sales and operations team on current and potential risks and recommends appropriate mitigation activities * Ensures the adherence to the Project Development process and use of standard tools and software. * Acts as a liaison between Sales and Solution Engineering team to assess the strengths and weaknesses of selected products and product applications. * Evaluates value-engineering options related to the Building Automation System associated with mechanical, electrical, and plumbing systems. * Participates in turnover meetings with the assigned Project Manager. Ensures that the Project Manager understands the technical solutions sold. Provides all documentation and specification related details. What we look for * Bachelor’s Degree in Engineering or Engineering Technology. * Demonstrated computer and analytical skills. * Background in Installation Operations as an Application Engineer or as an Installation Project Manager preferred. * Five to seven years plus in Controls sales/operations experience with HVAC systems and project cost development of Building Automation Systems (BAS) [Automatic Temperature Controls (ATC), Building Management Systems (BMS)]

Your new Company A well-established MEP consulting firm in Central New Jersey is looking to hire a Senior Electrical Design Engineer to support continued growth and a strong pipeline of repeat client work. This is a hands-on, senior-level role suited to an engineer who enjoys taking ownership of projects, working closely with architects and internal teams, and being involved from concept through construction. The position is primarily office-based to support collaboration, mentoring, and site activity. Your new role • Commercial, • Institutional, • Industrial, • Multifamily residential, • Producing construction documents and technical drawings using AutoCAD, • Applying relevant electrical, life safety, and building codes, • Coordinating with architects, clients, and other engineering disciplines, • Carrying out site visits and field surveys as required, • Supporting and mentoring junior engineers (with longer-term opportunities to step into a lead role) What you’ll need to succeed • Experience in electrical building systems design, • Strong background in electrical MEP and fire alarm design, • Ability to work independently and manage projects with minimal supervision, • Solid working knowledge of codes and standards, • Proficiency in AutoCAD and comfort producing your own drawings What you’ll get in return • A senior, hands-on role with real technical ownership, • Exposure to a diverse mix of technically interesting projects, • A collaborative, low‑politics working environment, • Opportunity to grow with the business and influence the electrical function, • Competitive salary based on experience and capability (flexibility for the right candidate) What you need to do now If you’re interested in this Senior Electrical Design Engineer role and would like to learn more, apply now or contact us for a confidential discussion.

Design and Engineering of Plumbing and Fire Protection systems • Project specification writing, • Project cost estimating, • Code analysis, • Review project submittals, answer RFI’s and other Construction Administration Services, • Collaboration with all internal discipline employees, external design partners, and clients, • Attend project site visits and client meetings, • Visit project sites for site investigations of existing buildings, • Perform plumbing and fire protection engineering calculations, • Effectively communicate complex ideas and solve engineering issues that may arise QUALIFICATIONS • 1-5 years of experience in the engineering of plumbing and fire protection systems for various types of facilities • Bachelor of Science Degree in Mechanical Engineering (BSME) from an ABET accredited college • EIT certification or Licensed Professional Engineer (PE) a plus but not required, • Knowledge of building codes and energy standards, • Proficiency in AutoCAD and REVIT is essential, • Experience communicating directly with clients, • Excellent written and oral communication skills

As a Data Science/Data Engineer Intern, you will work on cutting-edge analytical and data engineering projects that drive measurable business impact across pricing, underwriting, marketing, and claims. This internship is ideal for a technically curious, motivated problem-solver who wants hands-on data science experience. RESPONSIBILITIES • Support the design, construction, and optimization of robust data pipelines to enable machine learning and analytical modeling., • Contribute to the design and implementation of data and ML workflows using orchestration tools such as Dagster, Airflow, or similar frameworks., • Help implement data quality checks, validation routines, and monitoring for automated data workflows., • Assist in organizing and managing internal GitHub repositories to standardize ML project structures and best practices., • Collaborate with data scientists and engineers to automate the ingestion, transformation, and delivery of data for model development., • Contribute to initiatives migrating analytical processes into cloud-based data lake architectures and modern platforms such as AWS or Snowflake., • Develop reusable and well-tested code to support analytical pipelines and internal tools using Python and SQL., • Conduct data mining, cleansing, and preparation tasks to build high-quality analytical datasets., • Participate in model development, including data profiling, model training, validation, and interpretation., • Build and evaluate predictive models that enhance profitability through improved segmentation and estimation of insurance risk., • Assist in studies evaluating new business models for customer segmentation, retention, and lifetime value., • Collaborate with business leaders to translate insights into operational improvements and cost efficiencies. QUALIFICATIONS • Currently pursuing or recently completed a Master’s in Data Science, Computer Science, Statistics, Economics, or related field., • Proficiency in Python (Pandas, NumPy, Scikit-learn, XGBoost, or PyTorch) and SQL., • Understanding of data engineering concepts, ETL/ELT workflows, and machine learning deployment., • Exposure to workflow orchestration tools (e.g., Airflow, Dagster, Prefect) and Git/GitHub for collaborative development., • Familiarity with Docker, CI/CD pipelines, and infrastructure-as-code tools such as Terraform preferred., • Knowledge of AWS cloud services such as S3, Lambda, EC2, or SageMaker a plus., • Experience with common modeling techniques (e.g., GLM, tree-based models, Bayesian statistics, NLP, deep learning) through coursework or projects., • Strong analytical, communication, and problem-solving skills., • A self-starter mindset, with attention to detail and enthusiasm for learning new technologies. SALARY RANGE The pay range for this position is $35 hourly. ABOUT THE COMPANY The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent."

Job Title: Project Administrator - Data Center Information Technology/Design/Engineer Firm Job Type: Full-time Job Location: On-Site Edison, NJ Project Administrator NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. The Project Administrator is responsible for managing the administrative tasks and logistical aspects of data center construction or expansion projects, including coordinating with various teams, tracking project progress, maintaining documentation, and ensuring smooth execution of project activities under the guidance of a project manager, all while adhering to deadlines and budget constraints; essentially acting as the organizational backbone for the project. Responsibilities include but are not limited to: • Support project team on all administrative tasks and duties., • Heavy client/vendor/supplier interaction., • Preparation of spreadsheet reports, contracts documents, purchase and change order requests, presentations, and correspondence., • Receive, maintain and distribute submittals, RFI’s, shop drawings and establish project log to record receipt and disposition of same., • Coordinate project meetings and travel arrangements., • Maintain electronic and manual database of all project files and archives., • Other responsibilities normally performed in the execution of a Project Administrator position according to standard Architectural/Engineering industry practices., • Assist architects/engineers with editing/issuing project book specifications (electronic IE: Master Specs). Qualifications: • Three to five years experience in Engineering firms or related fields., • BA is recommended., • Must exhibit initiative, judgment, and quality in performance and responsibilities., • Deadline and detail oriented., • Proficiency in Microsoft Office, Word, Excel, Outlook, Power Point., • Ability to work well with multi disciplines in a fast paced environment. Work Schedule: This is a full-time job position. In office, not remote or virtual. Normal business hours are Monday thru Friday 8-5pm. Benefits: • 401 k match to $3500, • Full health medical/dental/prescription/life insurance (75% paid by employer 20-25% paid by employee), • After 3/5 years eligibility based on rating for company owned NJ shore house, • Tuition reimbursement for employee, • Subjective year end bonus plan(end September), • Awards/recognition for superior effort and extraordinary excellence, • Longevity awards 5/10/15/20/25/30 plus years, • After 15 years education assistance for children eligibility, • After 15 years eligibility for additional retirement compensative (elective) BRUNS-PAK is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, gender identity and/or expression, national origin, disability, veteran, or other protected status.

Seeking a highly motivated and collaborative Electrical Designer or Engineer to join our growing team. This position is ideal for someone passionate about thoughtful design, team collaboration, and high-performance building systems. The person in this role should have an Electrical Engineering or Architectural Engineering degree, or 3–7+ years of experience designing electrical systems for commercial, mixed-use, or institutional buildings. This person will be responsible for the design and documentation of electrical systems, including power distribution, lighting, fire alarm, and low voltage systems, and for coordinating with other disciplines including mechanical, plumbing, architectural, and structural. Position Qualifications: • Electrical or Architectural Engineering degree (or equivalent experience), • 3–7+ years of electrical design experience, • EIT or PE license preferred not required, • Excellent knowledge and proficiency with Revit and BIM 360, • Experience with multi-story, multi-family electrical design preferred, • Strong knowledge of CEC, NEC, and other applicable codes, • Familiarity with restaurant electrical systems is a plus, • Strong understanding of the plan review and permitting process, • Excellent written and verbal communication skills, • A positive, energetic attitude, • A desire for personal and professional growth, • A team-first mindset with a collaborative spirit, • Strong attention to detail, • Empathy and respect for coworkers and project partners

Summary We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. This role is responsible for the design, improvement, and oversight of production processes, ensuring efficiency, quality, safety, and regulatory compliance. The ideal candidate combines hands-on plant experience with technical leadership, customer interaction, and cross-functional collaboration to drive continuous improvement across operations. Key Responsibilities • Design, develop, test, and improve mechanical systems, equipment, and process applications., • Analyze and optimize chemical and manufacturing processes to increase throughput, improve efficiency, and reduce waste., • Schedule and manage production operations involving blending, milling, drying, and screening equipment for maximum efficiency., • Lead employees across production and technical operations., • Oversee preventive maintenance and downtime activities to ensure operational reliability., • Conduct client laboratory testing, including data intake, feasibility studies, process development, optimization, and final reporting; ensure high client satisfaction., • Perform root cause analysis on process failures and implement corrective and preventive actions., • Manage operational budgets and present performance metrics and financial results to leadership., • Collaborate with operations, R&D, quality, and regulatory teams to implement new or improved processes., • Develop, maintain, and manage technical documentation, including SOPs, certifications, regulatory filings, and compliance records., • Bachelor’s degree in Chemical Engineering, Process Engineering, or a related field., • Minimum of 5+ years of process engineering experience, • Experience in powder-based manufacturing within pharmaceutical, nutraceutical, cosmetic, or chemical industries., • Hands-on experience with laboratory equipment, including particle size analyzers, microscopes, moisture balances, and scales., • Proven ability to work directly with customers and present technical findings., • Strong understanding of chemical engineering fundamentals, including fluid dynamics, thermodynamics, and heat transfer., • Knowledge of industrial electrical control panels and their integration with manufacturing equipment., • Strong regulatory background, with responsibility for maintaining FDA, DEP, EPA, cGMP, SQF, and related programs., • Proficiency with CAD and process simulation software is a plus., • Excellent analytical, problem-solving, and organizational skills.

Summary The Security Engineer main role is to design, implement, and oversee our cybersecurity strategy, ensuring robust protection against evolving threats. The ideal candidate will have 7-10 years of experience in cybersecurity architecture, security operations, and risk management with a strong focus on enterprise security solutions, cloud security, identity & access management (IAM), and security best practices. The Security Architect must have hands-on experience with internet secure gateway, EDR, MDR, ITDR, secure email gateway, firewalls, MFA, scripting, policies, data classification, and cloud security controls. This role requires deep expertise in security frameworks, architecture principles, security automation, and compliance standards (NIST, CIS, ISO 27001, Zero Trust, etc.). Essential Functions • Develop and maintain a comprehensive security architecture covering on-premises, cloud, and hybrid environments., • Design security solutions that align with business objectives while mitigating risk., • Ensure Zero Trust principles, network segmentation, and security best practices are enforced across the enterprise., • Architect cloud security strategies, leveraging best practices for Azure and GCP., • Lead security investigations, conduct root cause analysis, and document incident response actions., • Provide threat intelligence and recommend proactive security measures to mitigate risk., • Implement and maintain cloud security controls in Azure and GCP., • Optimize cloud security solutions for web and network protection., • Ensure Active Directory (AD) and IAM policies align with best practices., • Support identity governance, access reviews, and privileged access management (PAM)., • Oversee the continuous best practice is leveraged for data classification policies and enforce data protection controls., • Conduct security assessments and ensure compliance with industry standards (PCI, NIST, CIS)., • Recommend, evaluate, and implement new security technologies based on business needs and threat landscape., • • Work with DevOps and IT teams to integrate security automation, security-as-code, and DevSecOps principles. Additional Functions • Threat Modeling & Risk Management:, • Conduct threat modeling, risk assessments, and security reviews for applications, infrastructure, and networks., • Provide technical leadership in responding to security incidents, forensic analysis, and root cause investigations., • Develop and maintain security policies, standards, and playbooks for security operations., • Collaborate with IT and business units to ensure security compliance with regulatory frameworks (PCI DSS, NIST, ISO 27001, SOC 2)., • Identity & Access Management (IAM) & Authentication:, • Design and enhance IAM policies, privileged access management (PAM), and role-based access control (RBAC)., • Enforce strong authentication and MFA strategies using Okta, Microsoft Authenticator, and AD., • Define identity threat detection and response (ITDR) strategies. Security Governance & Compliance: • Ensure security controls align with industry frameworks (NIST CSF, ISO 27001, CIS, Zero Trust, MITRE ATT&CK)., • Assist with audit, regulatory compliance, and security assessments., • Conduct penetration testing, red/blue teaming exercises, and vulnerability management programs., • Provide security guidance for third-party risk management and vendor security evaluations. Leadership & Collaboration: • Act as a subject matter expert (SME) in cybersecurity architecture and best practices., • Provide mentorship and training to security engineers and analysts., • Work cross-functionally with IT, DevOps, and executive leadership to align security strategy with business goals., • Develop security roadmaps and strategic initiatives for continuous security improvement., • Maintain and fine-tune security configurations across various security platforms., • Identify security gaps and recommend security enhancements and process improvements., • Develop playbooks and automation scripts to enhance security operations efficiency., • Conduct vulnerability assessments and penetration testing to identify security weaknesses in systems and applications., • Develop and implement security policies, procedures, and standards to ensure compliance with industry’s best practices and regulatory requirements., • Investigate security breaches and other security incidents to determine the root cause and implement corrective actions., • Stay up-to-date on the latest security threats and vulnerabilities and recommend appropriate security measures., • Collaborate with other IT teams to ensure that security is integrated into all aspects of the organization's IT infrastructure., • Participate in security audits and assessments to identify and address security gaps., • Develop and maintain incident response plans and procedures., • Evaluate and recommend security technologies and solutions to improve the organization's security posture. Qualifications • 7-10 years of experience in cybersecurity architecture, security operations, or cloud security., • Deep understanding of:, • Enterprise security architectures, security frameworks (NIST, CIS, Zero Trust, ISO 27001), and best practices, • Email secure gateway (Proofpoint, Mimecast), • Firewalls (Palo Alto, Cisco) and network security principles, • Cloud security (Azure, GCP) and security automation, • IAM, MFA, AD, Okta, Microsoft Authenticator, • Endpoint security, EDR, ITDR, and threat intelligence, • Data classification, DLP, and information protection, • Experience designing secure architectures for large-scale enterprises and cloud environments., • Strong knowledge of DevSecOps, security automation, and scripting (Python, PowerShell, Terraform)., • Excellent communication and leadership skills, capable of influencing security strategies across the organization., • CISSP Certifications (Required): CISM and CCSP is plus, • A bachelor's degree in computer science, information systems, or a related experience., • 7-10 years of experience in cybersecurity, security operations, or network security., • Hands-on expertise with:, • Zscaler, CrowdStrike, Microsoft Defender, Sophos, • Proofpoint (Email Security Gateway), • EDR & ITDR solutions, • Palo Alto & Cisco Firewalls, • Okta, Microsoft Authenticator (MFA), Active Directory (AD), IAM, • Cloud Security (Azure and GCP), • Data classification and protection strategies, • Strong knowledge of threat intelligence, SIEM, vulnerability management, and incident response., • Experience with security frameworks such as PCI, NIST, ISO 27001, CIS Benchmarks., • Strong analytical, problem-solving, and communication skills., • Ability to work independently and collaboratively in a fast-paced environment., • Excellent communication and interpersonal skills, capable of collaborating effectively with cross-functional teams. Working Conditions & Physical Demands This position requires in person office presence at least 4x a week.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. The ideal candidate will have a strong background in designing, developing, and implementing complex projects, with focus on automating data processes and driving efficiency within the organization. This role requires a close collaboration with application developers, data engineers, data analysts, data scientists to ensure seamless data integration and automation across various platforms. The Data Integration & AI Engineer is responsible for identifying opportunities to automate repetitive data processes, reduce manual intervention, and improve overall data accessibility. Essential Functions • Participate in the development life cycle (requirements definition, project approval, design, development, and implementation) and maintenance of the systems., • Implement and enforce data quality and governance standards to ensure the accuracy and consistency., • Provide input for project plans and timelines to align with business objectives., • Monitor project progress, identify risks, and implement mitigation strategies., • Work with cross-functional teams and ensure effective communication and collaboration., • Provide regular updates to the management team., • Follow the standards and procedures according to Architecture Review Board best practices, revising standards and procedures as requirements change and technological advancements are incorporated into the >tech_ structure., • Communicates and promotes the code of ethics and business conduct., • Ensures completion of required company compliance training programs., • Is trained – either through formal education or through experience – in software / hardware technologies and development methodologies., • Stays current through personal development and professional and industry organizations. Responsibilities • Design, build, and maintain automated data pipelines and ETL processes to ensure scalability, efficiency, and reliability across data operations., • Develop and implement robust data integration solutions to streamline data flow between diverse systems and databases., • Continuously optimize data workflows and automation processes to enhance performance, scalability, and maintainability., • Design and develop end-to-end data solutions utilizing modern technologies, including scripting languages, databases, APIs, and cloud platforms., • Ensure data solutions and data sources meet quality, security, and compliance standards., • Monitor and troubleshoot automation workflows, proactively identifying and resolving issues to minimize downtime., • Provide technical training, documentation, and ongoing support to end users of data automation systems., • Prepare and maintain comprehensive technical documentation, including solution designs, specifications, and operational procedures. Qualifications • A bachelor's degree or higher in computer science, information systems, or a related field., • Hands-on experience with cloud data platforms (e.g., GCP, Azure, etc.), • Strong knowledge and skills in data automation technologies, such as Python, SQL, ETL/ELT tools, Kafka, APIs, cloud data pipelines, etc., • Experience in GCP BigQuery, Dataflow, Pub/Sub, and Cloud storage., • Experience with workflow orchestration tools such as Cloud Composer or Airflow, • Proficiency in iPaaS (Integration Platform as a Service) platforms, such as Boomi, SAP BTP, etc., • Develop and manage data integrations for AI agents, connecting them to internal and external APIs, databases, and knowledge sources to expand their capabilities., • Build and maintain scalable Retrieval-Augmented Generation (RAG) pipelines, including the curation and indexing of knowledge bases in vector databases (e.g., Pinecone, Vertex AI Vector Search)., • Leverage cloud-based AI/ML platforms (e.g., Vertex AI, Azure ML) to build, train, and deploy machine learning models on a scale., • Establish and enforce data quality and governance standards for AI/ML datasets, ensuring the accuracy, completeness, and integrity of data used for model training and validation., • Collaborate closely with data scientists and machine learning engineers to understand data requirements and deliver optimized data solutions that support the entire machine learning lifecycle., • Hands-on experience with IBM DataStage and Alteryx is a plus., • Strong understanding of database design principles, including normalization, indexing, partitioning, and query optimization., • Ability to design and maintain efficient, scalable, and well-structured database schemas to support both analytical and transactional workloads,, • Familiarity with BI visualization tools such as MicroStrategy, Power BI, Looker, or similar., • Familiarity with data modeling tools., • Familiarity with DevOps practices for data (CI/CD pipelines), • Proficiency in project management software (e.g., JIRA, Clarizen, etc.), • Familiarity with DevOps practices for data (CI/CD pipelines), • Strong knowledge and skills in data management, data quality, and data governance., • Strong communication, collaboration, and problem-solving skills., • Ability to work on multiple projects and prioritize tasks effectively., • Ability to work independently and in a team environment., • Ability to learn new technologies and tools quickly., • The ability to handle stressful situations., • Highly developed business acuity and acumen., • Strong critical thinking and decision-making skills. Working Conditions & Physical Demands This position requires in-person office presence at least 4x a week. Compensation and Benefits The salary range for this position is $75,868 - $150,644. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements

Remote position with the ability to travel to our NJ and NY locations up to 25% of the time. Position Summary: Data Engineer with previous experience in the insurance domain, design, build, and maintain scalable data pipelines and models that power analytics and Generative AI initiatives. The Data Engineer will collaborate closely with analysts and engineers, to understand data needs, develop efficient solutions, and ensure the integrity, performance, and security of our data systems. • Analyze integration and system requirements by understanding business needs and designing effective data solutions, particularly for Guidewire Policy, Billing Center and Commercial P&C data domains., • Design, develop, and optimize ELT pipelines to ingest, transform, and load data into a Delta Lakehouse platform., • Design, Develop and maintain data models and schemas ensuring data quality and integrity., • Build and maintain dashboards and reports delivering actionable business insights., • Monitor pipeline and storage performance; troubleshoot and resolve data issues promptly., • Collaborate with cross-functional teams, including analysts and business users, to deliver end-to-end insurance data solutions., • Implement data governance, security, and compliance standards across platforms., • Conduct root cause analysis for system failures and performance events; drive continuous improvements in enterprise data integration pipelines., • Create and manage testing procedures (unit, scenario, end-to-end) to ensure pipeline reliability., • Stay current with emerging technologies and recommend improvements to workflows., • Mentor team members on data engineering tools, Guidewire data model concepts and best practices., • Build and maintain data pipelines to process structured and unstructured data (like documents and text) for Generative AI tasks, including creating embeddings and working with vector databases to support AI search features., • Prepare and clean large datasets to ensure high-quality inputs for training and fine-tuning Generative AI models., • Collaborate with AI and data science teams to understand data requirements and deliver scalable solutions that support model training and inference., • Implement processes to enrich data with metadata and context to improve AI model accuracy and relevance., • Optimize data storage and retrieval methods to support fast, low-latency responses for AI-powered applications., • Monitor data workflows for Generative AI projects, troubleshooting issues, and ensure continuous pipeline performance., • Bachelor's degree in relevant field of study required(e.g. computer science, data science, data analytics, applied mathematics, etc.), • 5+ years of progressive work experience in IT or a related field required., • 3+ years of experience in data engineering and analytics, with a solid foundation in data architecture and integration, including hands-on work with complex enterprise P& C Insurance data models required., • 2+ years of experience with data-centric projects within the Guidewire ecosystem, including working with Guidewire Policy Center and related data structures required., • In-depth understanding of relational database systems (e.g., Oracle, SQL Server, MySQL), including their features and performance optimization strategies., • Solid grasp of ETL processes, data pipeline architectures, and data integration techniques, particularly for operational source systems such as Guidewire., • 2+ years of hands-on experience with Azure Databricks, Azure data factory including developing and optimizing data pipelines using Apache Spark required., • 2+ years of experience working with Power BI or other leading data visualization and reporting tools required., • Proven expertise with Apache Spark, Delta Lakehouse, and data warehousing technologies required., • Proficient in Microsoft Azure services, including:, • Azure SQL Database, • Azure Data Lake Storage Gen2, • Azure Event Grid, • Azure Key Vault, • Strong understanding of CI/CD pipelines and experience in Agile development environments., • Demonstrated ability to troubleshoot system issues, identify root causes, and implement effective solutions quickly., • Capable of managing multiple priorities with strong attention to detail and follow-through., • Working knowledge of Generative AI frameworks and use cases in data engineering is a plus., • Knowledge of data governance, metadata management, and data quality frameworks., • Understanding of data security and privacy principles, including encryption, anonymization, and access control mechanisms., • Proficient in Microsoft Office Suites, • Strong understanding of the Insurance Domain and Experience using Guidewire CDA data model to build use case specific datasets., • Data Modeling, • Expertise in Azure Databricks, Azure Data Factory, Apache Spark, and data pipeline development for scalable data engineering solutions, • Collaboration with cross-functional groups

Remote position with the ability to travel to our NJ and NY locations up to 25% of the time. Position Summary: The position is responsible for designing, building, deploying, and maintaining enterprise-grade Agentic AI solutions under the direction of an Sr. AI Engineer. This role focuses on implementing autonomous and semi-autonomous AI agents using large language models (LLMs), orchestration frameworks, and Azure-native AI services. The position supports intelligent automation initiatives across Insurance business domains by translating product requirements into scalable, secure, and observable AI systems. • Design, develop, and deploy Agentic AI systems based on product requirements defined by the Business SMEs., • Implement agent workflows including:, • Planning, execution, validation, and retry logic, • Tool and API invocation, • Context and memory management, • Build and maintain LLM-powered pipelines, including RAG-based architectures., • Integrate AI agents with enterprise systems using APIs, event-driven workflows, and automation services., • Develop and manage data ingestion and enrichment pipelines for structured and unstructured data., • Monitor AI system performance, accuracy, latency, and cost; implement optimizations and improvements., • Implement guardrails, safety mechanisms, and human-in-the-loop controls., • Support production deployment using Azure-native services and CI/CD pipelines., • Document system architecture, workflows, prompts, and operational runbooks., • Collaborate with product managers, architects, and data teams to iterate on AI solutions., • Participate in special projects and perform additional duties as required., • Bachelor's Degree in Computer Science, Engineering, or related field required., • 1-3 years of experience in AI/ML engineering, data engineering, or software engineering required., • Hands-on experience with LLMs, GenAI, or intelligent automation systems required., • Experience building AI solutions on cloud platforms, preferably Microsoft Azure required., • Exposure to Agentic AI, workflow orchestration, or multi-agent systems preferred., • Strong proficiency in Python and AI/ML libraries., • Hands-on experience with:, • LLMs, prompt engineering, and RAG architectures, • Vector databases and semantic search, • Agent orchestration frameworks, • Experience with Microsoft Azure, including:, • Azure OpenAI, • Azure Functions, Logic Apps, AKS, • Knowledge of API development and system integration., • Familiarity with CI/CD pipelines, Git-based version control, and Agile delivery., • Strong analytical, troubleshooting, and communication skills., • Azure AI Fundamentals or equivalent certification preferred., • Familiarity with data privacy, security, and compliance in AI development., • Exposure to prompt engineering and GenAI tools a plus., • Insurance domain exposure preferred. The salary range for this role is $69,100-$124,400. The listed annual salary range posted for this position is subject to change and may vary depending on performance, education, experience, skills, geographic location, travel requirements, demonstrated proficiency in the competencies required for the role and business needs. Base pay is just one component of GNY's total compensation package for employees. Other rewards include eligibility for an annual discretionary bonus based on performance.

Job Description Date posted: March 13, 2026 Pay: $50,000.00 - $65,000.00 per year Job description: Job Title: Administrative Assistant - Data Center Information Technology/Design/Engineer Firm Job Type: Full-time Job Location: On-Site Edison, NJ Administrative Assistant NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. The Project Administrator is responsible for managing the administrative tasks and logistical aspects of data center construction or expansion projects, including coordinating with various teams, tracking project progress, maintaining documentation, and ensuring smooth execution of project activities under the guidance of a project manager, all while adhering to deadlines and budget constraints; essentially acting as the organizational backbone for the project. Responsibilities include but are not limited to: 1. Support project team on all administrative tasks and duties., 2. Heavy client/vendor/supplier interaction., 3. Preparation of spreadsheet reports, contracts documents, purchase and change order requests, presentations, and correspondence., 4. Receive, maintain and distribute submittals, RFI’s, shop drawings and establish project log to record receipt and disposition of same., 5. Coordinate project meetings and travel arrangements., 6. Maintain electronic and manual database of all project files and archives., 7. Other responsibilities normally performed in the execution of a Project Administrator position according to standard Architectural/Engineering industry practices., 8. Assist architects/engineers with editing/issuing project book specifications (electronic IE: Master Specs). Qualifications: 1. Three to five years experience in Engineering firms or related fields., 2. BA is recommended., 3. Must exhibit initiative, judgment, and quality in performance and responsibilities., 4. Deadline and detail oriented., 5. Proficiency in Microsoft Office, Word, Excel, Outlook, Power Point., 6. Ability to work well with multi disciplines in a fast paced environment. Work Schedule: This is a full-time job position. In office, not remote or virtual. Normal business hours are Monday thru Friday 8-5pm. Benefits: • 401 k match to $3500, • Full health medical/dental/prescription/life insurance (75% paid by employer 20-25% paid by employee), • After 3/5 years eligibility based on rating for company owned NJ shore house, • Tuition reimbursement for employee, • Subjective year end bonus plan(end September), • Awards/recognition for superior effort and extraordinary excellence, • Longevity awards 5/10/15/20/25/30 plus years, • After 15 years education assistance for children eligibility, • After 15 years eligibility for additional retirement compensative (elective). BRUNS-PAK is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, gender identity and/or expression, national origin, disability, veteran, or other protected status. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Paid time off, • Tuition reimbursement Work Location: In person Company DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job DescriptionAre you inspired by the idea of supporting our nation’s critical infrastructure and securing communications for first responders, utilities, and transportation? Are you an independent, self-motivated individual contributor also capable of rolling up your sleeves and supporting your teammates when unexpected challenges arise? Company OverviewEastern Communications, Ltd. is a critical communications provider based in Long Island City, Queens, NY. Founded in 1976, and acquired from original ownership in 2020, Eastern provides infrastructure, technical services, field replacement parts, and maintenance to a range of end users including public safety, transportation, utilities, and the federal government. The company has earned its exceptional reputation for delivering the highest quality products and services over its 40+ year history. In November 2025, Eastern acquired Hazlet, New Jersey-based PMC Wireless, and now comprises 230 employees across 17 locations nationwide. Role OverviewReporting to the System Engineering Manager, the role of the Systems Engineer is to conduct systems engineering aspects of design, configuration, implementation and testing for projects of Land Mobile Radio wireless communications systems and dispatch center technologies for Public Safety, Transportation and Utility Customers. Duties and Responsibilities • Design and implement RF and networked communications systems for public safety clients, • Develop system documentation including design drawings, interface control documents, network configurations, and test plans, • Perform technical planning, system parts ordering, integration, verification and validation, and risk/support-ability analyses, • Collaborate with internal stakeholders including Project Managers, Network Engineers, and other Systems Engineers to ensure full lifecycle project integration, • Participate in customer and vendor discussions to support project execution and technical alignment, • Present project-specific technical information in meetings and contribute to proposal development, • Adapt procedures and coordinate work across engineering and field teamsRequirements, • Bachelor’s degree in Electrical Engineering, Computer Engineering or similar technical degree with a minimum 3-5 years of prior relevant experience, • Position based in Hazlet, NJ with potential for remote workPreferred Skills, • Two way radio systems including P25 and DMR multi-site conventional simulcast and trunking systems, • Networking, dispatch systems and telephony systems, • RF antenna systems, • Experience working with RF, system design, networking configuration, system programming, • Familiarity with technologies including Fiber Optics, MPLS, Microwave, VM servers, Windows/Linux OS, • The ability to program, troubleshoot, and perform system diagnostics on simple and complex electronics systems, • Strong self-management skills and communication skills to work closely with PMC customers as well as PMC Technical and Project Management teams, • Strong presentation skillsBenefits We Can Offer You, • Health, dental and vision insurance, • 401k and company match, • Annual Performance Review and Accompanied bonus, • Paid holidays, vacation and sick days, • Ongoing technical training, • Advancement opportunities, • Company-provided uniforms and safety equipment

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA, • HSA, • Paid Time Off, • Paid Holidays, • Profit Share, • Disability Insurance, • Life Insurance, • 8-hour shift EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Software Engineer -Senior and Principal levels (multiple openings) Our client is a well-established, growing software company. Their Linux application is developed using Scrum Agile methodology. Most development is done in C language; some Python is used. As the company experiences this period of growth we are looking for talented individuals who are motivated by overcoming difficult technical challenges in a collaborative environment to join the team. Ideal candidates for these positions will love to code and have extensive experience developing algorithms and data structures for multi-threaded high performance software in C on Linux platforms. Experience developing software for data protection, backup or data storage applications is desired. Hybrid position working in the office 3 days per week. Responsibilities: • Work as a member of a Scrum team on the design and maintenance of software, • Develop and assist in definition of new product features and requirements, • Integrate software modules and ensure the system operates to meet requirements, • Develop and implement unit automated tests and quality improvements, support QA testing, • Be a key contributor in this small, challenging and collaborative environment, • reverse engineer complex data formats a plus, • manage your work and time with a hybrid work model, • BS or MS in Computer Science or other technical discipline or equivalent experience, • Strong skills in C programming and development on Linux platforms, • Extensive knowledge of data structures and algorithms, • A lot of focus is on performance and optimization. Experience developing high-performance algorithms and analyzing code to optimize is desired, • Experience with Python scripting is greatly preferred. Bash is a plus, • Team player with strong interpersonal skills, • Familiarity with Microsoft development environments a plus, • Experience with any of the following is a plus: data protection, backup, data storage; pthread; security; ransomware; embedded systems development with C; parallel, distributed or complex system programing project experience; machine learning; writing software that manipulates data at the bit and byte level.

Job Description Hiring: Civil Design Engineer Responsibilities: • Develop and refine civil site designs for commercial and residential projects, including grading, drainage, and layout., • Prepare detailed site plans, zoning plans, and subdivision plans in accordance with applicable regulations and standards., • Design and analyze stormwater management systems, including green infrastructure solutions, to ensure effective drainage and regulatory compliance., • Create and review stormwater and drainage calculations, reports, and supporting documentation., • Design septic systems and related site utilities as required for various land development projects., • Incorporate New Jersey Department of Environmental Protection (NJDEP) regulations into project designs and documentation, maintaining up-to-date knowledge of current requirements., • Address soil erosion and sediment control requirements in design documents and coordinate with appropriate agencies for approvals., • Prepare documentation and design packages to obtain subdivision approvals and other necessary permits., • Use AutoCAD Civil 3D to produce accurate drawings, models, and design details for land development and infrastructure projects., • Collaborate directly with professional engineers and other disciplines to coordinate design elements and resolve technical issues., • Utilize Microsoft Office applications to prepare reports, calculations, correspondence, and presentation materials., • Support multiple projects simultaneously while meeting deadlines and maintaining high quality standards., • At least 4 years of land development experience, • Proficiency in AutoCAD Civil 3D, • EIT and or PE preferred but not required Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description An electrical engineer participates with the electrical engineering team in electrical systems design and assists in the development of electrical systems drawings and documentation. Evaluates recent technical developments in product design to work towards an energy efficient, reliable and cost effective design. Assists with short circuit studies to illustrate the integrity of the distribution system design. Responsibilities: · Develop and coordinate the design and development of electrical and fire alarm systems and the required drawings and documentation · Performs Electrical design calculations. · Performs Short Circuit & Coordination & Arc Flash Studies (which includes site surveys, developing the one line, entering the one line into the program, analyzing the information, developing coordination curves and preparing the report). · Coordinates with other disciplines and the design team to develop a fully coordinated design · Attends project meetings to ensure schedule and deliverables are met. · Performs site surveys to collected pre-existing conditions information. Qualifications & Required Skills: · BS in Electrical Engineering or equivalent work experience · 0-5 years of experience · Proficient with AutoCAD and Microsoft Office Suite products - SKM software a plus · Knowledge of basic electrical engineering · Ability to work on multiple projects at once, manage their work load, communicate with team members · Working knowledge of power systems · 15% travel is required Company DescriptionKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection,\r\nPlumbing, Sustainable Design, and Commissioning of critical facilities.\r\nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\r\nPlease submit your resumes to

Job Description Summary We are currently representing a well-established civil engineering and infrastructure design firm seeking a Senior Civil Engineer with a minimum of 7+ years of experience in highway design, infrastructure improvements, and DOT projects. Based out of their Edison, NJ office, this individual will play a key leadership role in the planning, design, and delivery of transportation projects across New Jersey and the greater Northeast region. This position is ideal for someone with strong technical capabilities in roadway/highway engineering, a deep understanding of DOT standards (NJDOT/NYSDOT), and the ability to lead and coordinate cross-functional design teams. Key Responsibilities * Lead and manage highway and roadway design projects for public sector clients (NJDOT, counties, municipalities, etc.) * Prepare and review design plans, specifications, and cost estimates for infrastructure improvements * Oversee preparation of horizontal and vertical alignments, grading, drainage systems, and utility relocation plans * Manage project schedules, budgets, and client communications to ensure on-time delivery * Coordinate with internal teams and subconsultants including CAD designers, traffic engineers, and permitting specialists * Provide quality control for engineering documents and ensure compliance with agency standards * Mentor junior engineers and support staff, including assigning tasks and overseeing technical development * Support proposal development and business development efforts for highway/infrastructure pursuits * Attend project meetings, site visits, and coordinate with DOT and municipal reviewers as needed Project Types Include: * Highway and roadway rehabilitation * Intersection improvements and traffic flow enhancements * Site planning and civil infrastructure for public sector developments * Streetscape and ADA compliance upgrades * Utility coordination and relocation * Stormwater and drainage systems * Occasional bridge approach work or coordination with structural teams Qualifications * Bachelor’s degree in Civil Engineering (Master’s preferred) * 7+ years of experience in civil engineering focused on highway, infrastructure, and transportation projects * EIT or PE license preferred (New York or New Jersey preferred or ability to obtain) * Extensive knowledge of NJDOT, NYSDOT, or similar DOT agency standards and processes * Proficient with civil design software including MicroStation, InRoads, AutoCAD Civil 3D * Familiarity with stormwater, permitting, and utility relocation * Strong leadership, coordination, and communication skills * Experience mentoring and managing junior staff is a plus Compensation & Benefits * Competitive salary based on experience * Medical, dental, and vision insurance * 401(k) with company match * Paid holidays, vacation, and sick time * Hybrid work schedule * Career advancement and continuing education opportunities

Job Description As part of a team you will design and supervise the manufacturing of control and monitoring systems for Commercial and Naval Ships. You will work to produce equipment drawings , electrical wiring diagrams,cable interconnection drawings and interface designs. Assist in the functional design of HMI, PLC architecture, networks and communication interfaces.Perform Factory acceptance test of the finished system to both customer and regulatory societies. Support commissioning and sea trials from the office but at times visiting the ship.Finally provide technical advice and assistance to sales, and service personnel. Company DescriptionWe are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Leader to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Leader is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Leader is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Are you ready to shape the future of authentication? Join 1Kosmos and help lead the next wave in identity assurance and passwordless innovation. 1Kosmos is driving the future of identity security, empowering organizations to eliminate passwords and establish trust at every step of the identity lifecycle. As a vibrant team of innovators, we develop advanced authentication solutions trusted by some of the world’s leading brands. Join us as we create a passwordless world and set new standards for digital identity assurance. We are looking for an AI / Machine Learning Engineer to design, build, and deploy advanced computer vision and AI solutions. You will work on projects involving image capture, data extraction, and fraud detection, delivering high-performance models that can run on both mobile devices and cloud environments. This role blends R&D with production engineering—you’ll take ownership of the full ML lifecycle, from dataset creation and model training to deployment and performance optimization. Key Responsibilities • Design and implement AI models for image classification, object detection, OCR, and feature extraction., • Develop real-time image quality assessment and capture guidance algorithms., • Create and maintain data pipelines for collecting, cleaning, augmenting, and labeling datasets., • Implement model optimization techniques for mobile (on-device) and cloud inference., • Apply fraud detection methods to identify tampering, forgeries, or replay attacks in visual data., • Integrate ML models into production-grade APIs and mobile SDKs., • Monitor, evaluate, and continuously improve model accuracy and performance., • Collaborate with product and engineering teams to align AI capabilities with business goals. Requirements • Bachelor’s or Master’s degree in Computer Science, AI/ML, or related field (or equivalent experience)., • 3+ years of experience building and deploying ML models in production., • Proficiency in Python and ML frameworks (PyTorch, TensorFlow, or similar)., • Experience with computer vision libraries (e.g., OpenCV) and OCR technologies., • Strong understanding of deep learning architectures for image and text recognition., • Familiarity with cloud platforms (AWS, GCP, or Azure) and API development., • Strong problem-solving skills and ability to work in fast-paced environments., • Based in the NJ / NY area; Hybrid working model.Preferred Qualifications, • Experience with model quantization and optimization for mobile deployment., • Knowledge of synthetic data generation and data augmentation techniques., • Background in security, liveness detection, or anomaly detection., • Exposure to compliance and data privacy regulations (GDPR, CCPA)., • Cutting-Edge Tech Stack: Build with decentralized identity protocols, FedRamp High, FIDO2-certified cryptography, and NIST-compliant biometric systems., • Accelerated Growth: Receive annual stipends for certifications and attend key conferences like Identiverse or EIC., • Ownership & Impact: We move fast and will enable you to make a big impact with large customers in US & Canada., • Flexibility First: Unlimited PTO, and 2 days WFH

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionSummary: We are representing a well-established, multi-discipline civil engineering and land surveying firm seeking a Civil Engineer to support land development projects across the greater Central New Jersey region. This role focuses heavily on site development design using Civil 3D and is ideal for engineers who enjoy hands-on production work across grading, drainage, utilities, and permitting workflows. The position supports private-sector commercial, residential, and mixed-use developments and offers strong exposure to full-cycle civil design. This is a strong opportunity for a technically driven engineer looking to grow within a stable regional firm known for long-standing municipal relationships and steady project flow. Key Responsibilities: Prepare civil engineering plans and construction documents using AutoCAD Civil 3D Perform site grading, drainage, and stormwater management design Develop utility layouts including sanitary sewer, storm systems, and water mains Support engineering calculations, reports, and permitting submissions Coordinate with survey teams and internal disciplines to ensure accurate plan integration Address municipal review comments and revise plans as needed Implement redlines and assist with internal quality control processes Support project delivery from concept through construction documentation Qualifications: 5+ years of civil engineering experience with a strong focus on land development Advanced AutoCAD Civil 3D proficiency in a production environment Experience with grading, drainage, and site layout design Familiarity with municipal permitting and agency review processes Bachelor’s degree in Civil Engineering required EIT preferred or actively pursuing PE licensure Strong technical communication and organizational skills Ability to manage multiple design tasks in a collaborative team environment Compensation + Benefits: Competitive salary aligned with Central NJ market expectations ($85K–$115K typical range) Medical, dental, and vision insurance 401(k) plan Paid holidays and PTO Long-term growth within a stable, regionally established engineering firm Hands-on mentorship and strong Civil 3D technical development

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description CAD Operator: Full-time (Hourly) The candidate needed for this position with general supervision and proficiency will operate a CAD workstation, etc., to develop finished drawings. The individual will analyze sketches, notes, and other input material to determine the best approach to complete drawings. A CAD Operator will be fluent in various software packages so as to develop electronic plots as well as operate a plotter to transfer developed drawings to a reproducible medium. This position requires 1 to 2 years CAD experience with some technical coursework. The ability to utilize Revit is a plus and is preferred. Company DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionPatuxent Engineering, LLC is seeking a Qualified Structural Engineer for our Metuchen, New Jersey Office. Position is in-office working with our team of engineers/designers primarily on temporary structure projects. Work scope shall typically include steel and concrete design, foundations / pilings, underpinning, bracing, stability reviews, and existing structure evaluations. The ideal candidate preferences include a Professional Engineer license (please list all applicable states) and/or someone working under a PE and/or working towards a Professional Engineer License (not mandatory/requirement). Applicants without a PE license but have senior level relevant experience working with the above referenced scopes are heavily encouraged to apply. The candidate must be comfortable with full analysis and design of building components/stability. Candidate must be proficient and competent with steel, engineering codes (AISC, IBC, ACI, OSHA, ASTM, Chapter 33 NYC Building Code), connections, footings, support of excavation, concrete, floor system/underpinning, etc. Please attach resume and cover letter as well as list any projects completed that are related to this type of work. Salary is flexible based on experience in industry and knowledge

Job DescriptionDescription: As a Design Engineer, you will work with our outside and inside sales team and manufacturing team to design, produce, and deliver a high-quality hollow metal door and frame system. Job Function • Print and read architectural drawings to prepare shop drawings., • Draw and detail shop drawings for products and submit for approval to customers., • Create bill of materials (aka listing) for customer order to release into manufacturing., • Work with customers to assist them with the correct designs for their specialized needs, • Prepare product and project schedules for projects as requested., • Provide engineering and/or technical support to customers., • Participate in continual improvement projects., • Coordinate exact material requirements from which shop drawings were created., • Once all approvals of shop drawings are given, coordinate with manufacturing to ensure conditions are set for accurate delivery., • Review all assigned listings for accuracy., • Print and read architectural drawings in determining what is required on a job for a quote., • Perform take-offs for contract jobs., • Review and approve all pricing on contract jobs before sending to the customer for a quote. Experience in interior construction building products, preferred. Motivated, coachable, and able to follow instructions and procedures. Excellent interpersonal skills to interact with people from all levels and departments. Ability to communicate effectively in English. Knowledge of AutoCad.

Job DescriptionPatuxent Engineering, LLC is seeking a Professional Engineer (or anticipated) for our Metuchen, New Jersey Office. Position is in-office working with our team of engineers/designers primarily on temporary structure projects. Work scope shall typically include steel and concrete design, foundations / pilings, stability reviews, and existing structure evaluations as they relate to bracing, shoring, phase transitioning, construction elevator and hoisting applications, as well as construction equipment installation plans for form-work, worker-access, hoisting, cranes, construction elevators, concrete pumps, etc. The ideal candidate should have 4-6 years relevant experience working with steel and concrete. Candidate should also be a self starter with the ability to network with industry to create portfolio of clients/projects. The candidate must be comfortable with full analysis and design of building components/stability. Candidate must be proficient and competent with steel, engineering codes (AISC, IBC, ACI, OSHA, ASTM, Chapter 33 NYC Building Code), connections, footings, support of excavation, concrete, floor system/underpinning, etc. Additional preferences for candidates include a Professional Engineer license (please list all applicable states) and/or someone working under a PE and/or working towards a Professional Engineer License. Please attach resume and cover letter as well as list any projects completed that are related to this type of work. Salary is flexible based on experience in industry and knowledge

Job DescriptionAre you inspired by the idea of supporting our nation’s critical infrastructure and securing communications for first responders, utilities, and transportation? Are you interested in being part of a fast-paced, growing company with opportunities to expand your knowledge base across a multitude of mission critical communications technologies and product lines? Company OverviewEastern Communications, Ltd. is a critical communications provider based in Long Island City, Queens, NY. Founded in 1976, and acquired from original ownership in 2020, Eastern provides infrastructure, technical services, field replacement parts, and maintenance to a range of end users including public safety, transportation, utilities, and the federal government. The company has earned its exceptional reputation for delivering the highest quality products and services over its 40+ year history. In November2025, Eastern acquired PMC, and now comprises 240 employees across 17 locations nationwide. Role OverviewWith the continued growth of the company, we are currently looking for a Senior Solutions Engineer to provide technical pre-sales support on radio communications system opportunities for Public Safety, Industrial, Transportation and Utility markets. The Solutions Engineers will be responsible for maintaining a knowledge base and skill-set across multiple manufacturer product lines and technologies such as P25, DMR, Analog Radio Systems, Dispatch Consoles , Microwave Backhaul, DC Power Systems, Radio Antenna Systems, Voice Logging Recorders, and Paging Systems. Please be aware that this position may require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens.Duties and Responsibilities Include but are not limited to: • Generation of radio communications system quotations based on customer requirements. This will include aspects of system design, product knowledge, and spreadsheet data formatting and manipulation., • Technical lead in responding to Request for Proposals (RFP). Responsible for preliminary system design, creation of technical write ups, system drawings, and pricing., • Technical Liaison between the Customers and Manufacturers., • Performs market industry research into new products and technologies., • Research and respond to technical inquiries across various product lines., • Assists with product demonstrations in support of sales opportunities., • Create Radio Coverage Designs using software propagation tools., • Develops and maintains templates for proposals, system descriptions, engineering drawings, and test procedures., • Provides technical sales training to our Partners and Sales Teams on new products and engineering tools.Position Requirements, • Bachelor’s Degree or equivalent in a technical field. Preferred emphasis: Wireless Communications., • 8+years in technical services and/or pre-sales support., • Proven experience delivering frontline technical pre-sales support for customers, dealers, and partners., • Demonstration of innovation and depth of knowledge.Skills and Competencies:, • Ability to learn quickly and maintain knowledge of a wide portfolio of solutions as the technical expert for multiple product sets., • Ability to work effectively in situations with ambiguity, while maintaining a sense of urgency., • Strong verbal and written communication skills, demonstration of communications across multiple levels in an organization., • Advanced skills in Microsoft Excel, Word and PowerPoint are desired., • Knowledge of RF propagation, wireless, microwave, and/or telecommunications networks a plus.

Job DescriptionDescription: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Requirements: Key Responsibilities: Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization. Work Environment: This position will primarily be based in an office/manufacturing plant setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Work within project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes. Requirements Essential Skills and Experience: • Bachelor’s Degree in Civil, Environmental, Chemical, Mechanical, or Civil Engineering, • 1-5 years of experience in water and wastewater consulting field, • Registration as licensed Engineer-in-Training or ability to obtain within 18 months of hire, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Excellent oral and written communication skills, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools.Company DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job DescriptionSeeking experienced Engineer with extensive hands-on skills in implementing electrical and automation projects. Position will include developing and managing capital expense projects (CAPEX) from inception to completion. The candidate will support process optimization efforts throughout the facility. Ideal candidates should have hands-on experience troubleshooting technical issues related to industrial and manufacturing equipment. This position requires a strong understanding of safety policies and standards that are applicable for industrial operations. The Engineer will be leading and participating in many team orientated work groups. DUTIES / RESPONSIBILITIES • Provide technical coordination and support in the operating and capital expense management processes by initiating and running projects using the capital expense (CAPEX) project, equipment monitoring, stabilization, and improvements., • Responsible for detailed engineering work in the areas of instrumentation, PLC, power distribution, and equipment integration which includes electrical design, power distribution design, and automation system design., • Provide Technical Support for Operations working closely with leaders on Operational Improvements., • Trouble Shooting of Existing Equipment and Processes., • Develop and refine engineering procedures., • Process sample and data collection and interpretation. REQUIREMENTS / QUALIFICATIONS • Bachelor of Science Degree in Electrical Engineering, • 3-8 Years of Industrial, Hands-On Experience planning and installing electrical equipment and automation controls., • ISA Certified Automation Professional Certification (Preferred), • Demonstrated project management experience which includes planning, budgeting, design, execution, scheduling, procurement, installation and startup of electrical controls equipment and instrumentation., • Experience in troubleshooting and optimizing the performance of electrical control systems on production machines and equipment., • Knowledgeable in Industrial Safety and Construction Methods., • Demonstrated advanced skills in all Microsoft software such as Project, Word, Excel, PowerPoint, etc. and advanced drawing skills with Auto-Cad., • Knowledge of equipment, machine design standards and specifications and machine safety design, including ANSI, ASTM, FM, NFPA, and IEC., • Knowledge of NFPA-70 and NFPA-70E., • Knowledge of database systems for process control applications., • Installation and strong programming capability with Rockwell Automation PLC systems., • Working knowledge of automation communication systems., • Installation set up and troubleshooting abilities with AC and DC drives and motors. E04JI800n8pv40942j5

Job Description Job Title – Network/Security Engineer Help expand the boundaries of cutting-edge fintech security. Our client, a successful financial technology and services company, currently seeks a detail-oriented candidate to serve as a Network Security Engineer. In this position, you would work with senior technical network and leadership teams to provide scalable, consistent, and secure solutions across multiple different types of firewalls and network infrastructure, in both private and public clouds. Responsibilities: • Palo Alto, Meraki, Citrix, NetScaler, Network Routing, Software Defined Networks concepts (NSX,vtep/vxlan), VPN., • Monitor & Detection: utilize network traffic and security tools (SIEM, CrowdStrike, Rapid7,Palo Alto logs) for reporting of suspicious activity, intrusions, or malicious behavior, • Incident Response and Vulnerability Management: Respond to managed SOC alerts and conduct regular vulnerability assessments with various security tools, • Attend regular infrastructure meetings with Senior technical staff., • Ensure timely roll out and client sign off on new implementations., • Participate in periodic DR testing, provide immediate response for any critical issues, ensure the network is operating securely, highly available and meeting all SLAs with clients., • Work with senior technical network and leadership teams to provide scalable, consistent, and secure solutions across multiple different types of firewalls and network infrastructure, in both private and public clouds., • Create and maintain network diagrams., • Configure and manage MPLS/VPN solutions to provide secure remote access for employees, clients, and partners., • Work on the design and deployment of Software Defined Networks, optimizing performance and security., • Participate in weekly working group status calls with infosec and infrastructure working groups as needed. Participate in daily infrastructure meeting held at EST afternoons., • Flexibility to participate in on-call support some weeknights and weekends where needed for implementation checkout or triage., • Conduct regular training sessions for the IT team and relevant stakeholders on compliance requirements., • Foster a culture of compliance awareness to ensure all team members understand their roles in maintaining regulatory compliance, • Actively participate in industry forums and stay informed about evolving compliance standards., • Implement continuous improvement initiatives to enhance the organization's ability to meet and exceed compliance requirements., • Computer Science BS/Engineering., • 5-7 years of proven experience as a Network Security Engineer in private datacenters and cloud environments., • Relevant certifications such as CCNP Security, CISSP, or equivalent., • Expertise in designing, implementing, and maintaining robust network security solutions., • Routing-Knowledge of BGP & OSPF routing protocols., • Knowledge of cloud AWS/Azure routing and security infrastructure design, • In-depth knowledge of Palo Alto, Cisco ASA, Meraki, Citrix NetScaler, MFA access, SDN, VPN, and Cloud security., • Strong understanding of security best practices and familiarity with CrowdStrike, SecureWorks and industry's best practices., • Excellent troubleshooting and problem-solving skills., • Previous experience in financially regulated environments (SEC, OCC, Federal Reserve, FINRA, SOC 1 and SOC 2, etc.) preferred. Our client offers a comprehensive benefits package designed to support your health, well-being, and future. This includes medical, dental, and vision coverage, life and disability insurance, flexible spending accounts, a 401(k) retirement plan, and access to additional voluntary benefits. Employees also enjoy a perk program that provides special discounts. Salary Range: $130,000 – $150,000 The above requirements and qualifications are meant to describe the general nature of the position and do not represent all duties to be performed by the selected candidate. Please note that only candidates who are under consideration for the position will be contacted. The Company is an equal opportunity employer. All employment is decided on basis of qualifications, merit and business needs without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments. Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description We are seeking a detail-oriented Junior UI/UX Design Engineer to help shape the user experience of a complex Data Center Infrastructure Management (DCIM) platform. This role sits at the intersection of design and front-end engineering—ideal for someone who not only designs clean, intuitive interfaces but can also implement them with precision in a real-world application. You will work on simplifying complex workflows into efficient, low-friction user experiences that minimize clicks, page loads, and cognitive overhead. Key Responsibilities • UI/UX Design for Complex Systems, • Design intuitive workflows for data-dense and operationally complex interfaces., • Translate DCIM concepts (racks, power chains, cooling, network topology) into clear, usable UI patterns., • Optimize user journeys to reduce interaction cost (clicks, navigation depth, context switching)., • Component-Based Design & Implementation, • Design reusable UI components that serve as building blocks across the application., • Ensure components are flexible and context-aware (adapt styling/behavior based on usage context)., • Contribute to and evolve a consistent design system., • Pixel-Perfect Execution, • Implement UI with high visual fidelity—attention to spacing, alignment, typography, and micro-interactions., • Identify and correct inconsistencies (e.g., off-by-one spacing, misaligned elements, visual imbalance)., • Front-End Development, • Own, write and maintain CSS (or SCSS/Tailwind/etc.) to support scalable, maintainable UI patterns., • Collaborate closely with front-end engineers to integrate designs into a complex codebase., • Bachelors of Engineering or Computer Science Degree, • 1–3 years of experience in UI/UX design and front-end CSS development, • Strong visual design fundamentals (spacing, layout, typography, hierarchy)., • Experience designing and implementing reusable UI components., • Proficiency in CSS and modern front-end styling approaches., • Exposure to data center environments or DCIM concepts., • Experience working with complex enterprise or data-heavy applications., • Understanding of component-driven frameworks (Angular and AngularJS)., • Experience with design systems or UI libraries.WHY SUNBIRD?, • We are all about delighting our clients and live/breathe the end client/user experience, • We stock the office with soda, snacks, coffee and tea for you to refuel throughout the day, • We have amazing PTO Policy that allows you to take care of yourself and your family, • We offer medical, dental, vision and life insurance to eligible employees, • We believe in collaboration, teamwork, creativity and taking initiativeInterested? Read on for additional details about this opportunity to join our amazing team! Powered by JazzHR 1ZgSQX18UL

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • 8-hour shift EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description We’re hiring a bilingual (English/Spanish) Operations Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all manufacturing site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Operations Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Operations Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description CIVIL PROJECT ENGINEER: We are currently looking for the right team member with 6+ plus years of experience in civil engineering for our Municipal Engineering Department. This challenging position is structured to offer the successful candidate ongoing learning and career advancement. Team members work on projects that have a direct impact in local communities and provide a variety of municipal engineering and planning services affecting local infrastructure and land use. We work in urban, suburban and rural locations and collaborate with each client to understand their goal and vision. If you’re looking for rewarding work on a variety of projects, read on to learn how you can bring your expertise to a firm that combines state-of-the-art technology with a history of success. POSITION SUMMARY: This individual will design and/or manage a variety of infrastructure projects (owned by municipalities and local school districts) and will report directly to the Sr. Associate / Municipal Service Department Head. Such projects shall include roads, underground utilities, public buildings, recreational facilities, and land use applications submitted by private developers. PRIMARY DUTIES: • Responsible for acting as the project manager to one or more municipalities or other public agencies. The project manager will act as the single point of contact between the firm and the project. They will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attend regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects., • Provide technical advice to clients regarding design, construction, or capital program modifications., • Support of the field activities of our construction inspection staff, including providing timely data, shop drawing review, and client coordination. KNOWLEDGE, SKILLS and ABILITIES: • Ability to draft reports including illustrations, appendices, maps and other attachments to summarize research results., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Strong analytical and problem-solving skills., • Proficient with Stormwater Modeling Software, Microsoft Office Suite or related software. EDUCATION, EXPERIENCE & LICENSES REQUIREMENTS: • Bachelor’s degree in civil engineering, or related field from an accredited college or university., • Professional License (P.E.) required, • Valid Driver’s License and reliable transportation to field visits and client meetings as required. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description We’re Bentley Labs, a cutting-edge formulation and manufacturing partner to the World’s Best Beauty Brands! Our product formulation and production capabilities are wide-ranging and distinctive – with innovative, exciting products across skin care, bath and body, hair, and lip categories. Over the past 16 years, the Bentley team has grown to include some of the industry’s brightest stars. Our diverse and talented group are ever and truly a unit—working together toward an all-consuming vision to be the best. This is a place where we create products that matter, relationships that last, and where ambition is supported and rewarded! We know you work hard and we want you to be successful. What will we do for you? Let’s help you with tuition reimbursement. Don’t know something? Let us send you to classes. Have you heard of DOMO? We’ll teach you that too! Come on in and we’ll show you what else we have to offer you! Who you are…you celebrate your success and others too. You focus on the right solution with each customer. Your passion for providing outstanding service contributes to our high level of customer satisfaction. Building relationships is your strong suit. You like to have fun at work too! Loud laughing encouraged. SUMMARY: We are looking for a Mechanical Engineer with an interest to create and develop new and/or improving current equipment to create a state-of-the-art manufacturing facility. Owning responsible for all phases of the project life cycle including concept generation, preliminary and detail design, analysis, assembly, and test as well as manufacturing support. This role works closely with engineering and manufacturing teams to qualify and execute design inputs, as well as manage external suppliers, vendors, sub-contractors, and internal resources within the company. DUTIES AND RESPONSIBILITIES:  Maintain the knowledge base which consists of, but is not limited to, processes, documentation, engineering change orders, bills of material, product tables and system logs. Create and evaluate the documentation used in production.  Provide technical assistance during the sales phase of the project, including providing estimates of hours for design efforts.  Designs to meet requirements, ensure requirements are satisfied, while balancing the constraints of time and money.  Answers technical questions and resolving technical problems regarding the design, operation, and reliability of the equipment. Working closely with mechanics to trouble-shoot major breakdowns  Responsible for the design of the equipment, or process, develop drawings and BOM.  Creates the design schedule, establishes milestones, and manages the design effort to ensure quality and timeliness of the completed design package.  Serves as the primary focal point for all technical communications with the customer and internal group.  Establishes and maintains a design baseline and manages change orders.  Responds to shop floor feedback regarding technical problems encountered or improvements suggested during manufacture. Manages the resolution/ improvement process.  Inspects incoming equipment; completes FAT prior to shipment; creates and maintains manuals for equipment and custom job orders.  Manage the transferring of 2D CAD system to 3D (SolidWorks); Maintains CAD and SolidWorks databases and ensure accurate and timely retrieval of all engineering data.  Creates a system to maximize standardization with the capability to effectively deviate from standard designs when necessary.  Designs and maintains a system to ensure the continuous improvement of the engineering function to establish the company as a leader in state-of-the-art technology within its product lines.  Establishes the policies and procedures for tasks within this role to be performed on a continuing basis. QUALIFICATIONS:  Experience with production / manufacturing equipment  Degree in Mechanical Engineering  Ability to design solutions to improve productivity  Strong knowledge of machine functionality and baselines  Ability to create machine manuals / operating guide lines Reviewed by Date: Approved by Date: HR Approved Date: Last Update Next Update  Establish perimeters / setting from test result on equipment  Preform IQ, OQ, including FAT’s for new equipment  Knowledge in specifying proper equipment for manufacturing process  Ability to complete projects on time and on budget  Ability to manage multiple projects with no decline in quality control  Excellent verbal and written communication skills  Experience with working with outside vendors with equipment design and build  Bilingual a plus COMPETENCIES:  Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.  Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.  Teamwork--Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.  Planning/Organizing--Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.  Innovation--Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. PHYSICAL REQUIREMENTS:  Standing  Walking  Sitting  Typing/Keyboarding  Light work under 50 lbs. lifting

Job DescriptionSalary: Minimum - $100,000 annual Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Electrical Engineer – Iselin, NJ Direct Hire/ Permanent Placement $90k – $150k Base, 1st year onsite and then hybrid schedule, Full benefits, 401k THE CLIENT Multi-disciplinary Engineering Consultancy with their hands in numerous fields and building types: Residential, Commercial, Healthcare, Mission Critical, K-12, Higher Ed, Restaurant, Warehouse, etc. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Large scale and Complex building projects, • Project Management, • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings, • Revit, AutoCAD, SKM, COMCheck, AGI 32, • Degreed BSEE BSAE or equivalent, • EIT, PE, LEED Preferred, • 3+ years of relevant experience • No Sponsorship available

Job DescriptionPIXCEL () develops novel semiconductor-based photonic modules aimed at sensing and imaging applications. What you'll do: -You will be responsible for the design of novel Photonic Integrated Circuits (PICs). You will:-Develop passive and active photonic components using simulation tools.-Perform physical layout and DRC verifications.-Manage R&D and production PIC tape-outs.-Work with foundry partners to optimize PDKs.-Collaborate with the engineering team on innovative product concepts. Who you'll work with:You will be part of a multi-disciplinary start-up team, including optical, electrical, mechanical, and software engineers. You will work closely with PIXCEL’s silicon photonics development leads. The position is based in Matawan, NJ. Hybrid work arrangements will be considered for exceptional candidates. Who you are:You have extensive experience with silicon photonics and optoelectronic device design. You are enthusiastic about engineering and seeing your efforts contribute to innovative products for real-world applications. You are excited about the opportunity to help build a great company. You can work independently, but you value a friendly, team-oriented, collaborative work environment. You appreciate learning from your colleagues and letting them learn from you. Your great interpersonal and communication skills allow effortless collaboration across the organization. Minimum requirements:-Ph.D. with 2+ years or M.S. with 5+ years of industry experience.-Prior experience with commercial PIC tape-outs and design-for-manufacturing (DFM).-Proficient in GDS-based layout tools (e.g. KLayout or similar).-Experience with Lumerical, Cadence Vituoso, or similar EDA tools.-Demonstrated Python/Matlab coding skills.-Knowledge of commercial silicon photonics foundry processes.-Strong problem-solving and analytical skills. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Sr. Project Account Location: Central – NJ Salary/Wage: Competitive Salary and Benefit Package Status: Full Time, Employee Job Category: Finance and Accounting Relevant Work Experience: 3-5 years in equivalent position Career Level: Experienced Education Level: Associates degree Job Description: A professional engineering company in Middlesex County is seeking a detail-oriented individual with a minimum of an Associate Degree in a business-related field and 3-5 years of Accounting experience who will take complete responsibility for Sr. Project Accountant Role and related responsibilities. The applicant should display a positive and proactive attitude, strong organizational skills, and possess excellent communication skills. Position Responsibilities (including but not limited to): • Prepare and maintain various project accounting reports, • Enter monthly billing in the GL software system, • Maintain up-to-date billing system, • General Ledger Coding, • Reconcile to the general ledger & process adjustments, • Maintain Customer account files & aging reports, • Interact with project team on daily basis., • Reconcile Bank Statements, • Resolve client queries, • Manage collection and allocation of payments, • Knowledge of accounts receivable & AIA billing processes, • Knowledge of office administration and procedures, • Knowledge of general bookkeeping procedures, • Experience and working knowledge of MS Office, particularly Excel, • Familiarity with Timberline software is a plus, • Strong written and verbal communication skills Company DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.