Design engineer jobs in Syracuse, NYCreate job alerts

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: * Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. * Conduct RF system-level analysis, link budget calculations, and trade-off studies. * Select and integrate components such as mixers, amplifiers, oscillators, and filters. * Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. * Conduct laboratory testing, tuning, and validation of RF modules against specifications. * Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. * Support troubleshooting and root cause analysis for performance anomalies. * Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. * 5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). * Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). * Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) * Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). * Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. * Experience with PCB design for RF and microwave circuits. * Familiarity with military or aerospace standards for RF systems is a plus. * US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: * Knowledge of phased-array radar architectures. * Electronics packaging concepts * Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Syracuse, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job DescriptionTitle: Transmission Line EngineerLocation: REMOTE (EAST COAST, will be traveling to NY for meetings and once per month to Syracuse, NY)Up to $170k Overview:Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct HireBenefits: Medical, Dental, Vision, 401k, Tuition Reimbursement, PTO, Holiday Pay Job Summary: • As a Sr. Principal Transmission Line Engineer, you'll be instrumental in bringing high-voltage transmission line projects to life. Your expertise will be essential in routing, designing, and executing complex projects ranging from 69kV to 500kV., • Job Duties:, • Technical Analysis: Conduct in-depth structural analysis, loading tree assessments, and wire sag/tension calculations to ensure optimal design., • Design Leadership: Develop comprehensive design criteria and specifications, guiding the team towards innovative and efficient solutions., • Quality Assurance: Oversee quality control reviews to maintain the highest standards of engineering excellence., • Client Collaboration: Foster strong relationships with clients and external stakeholders, ensuring project alignment and success., • Qualifications:, • Academic Excellence: Bachelor's degree in Civil, Structural, Mechanical, or Electrical Engineering from an accredited institution., • Professional Engineer (PE) licensure or ACTIVE preparation for the PE exam, • Proven Experience: Minimum of 5 years of hands-on experience in high-voltage overhead transmission line routing and design., • Technical Proficiency: Mastery of Power Line Systems software (PLS, PLS-CADD, PLS-POLE) for designing 69kV to 500kV overhead lines., • Foundation Expertise: In-depth knowledge of drilled pier foundation design., • Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Infrastructure Engineer is responsible for the ongoing support, maintenance, and enhancement of both on-premises and cloud-based server hosting environments. This role involves designing, deploying, upgrading, and securing server infrastructure, including all associated hardware and software components. The engineer ensures the development of highly available, scalable, and secure infrastructure solutions, incorporating effective disaster recovery strategies. This position collaborates closely with IT Support, Business IT Analysts, Networking, and Cybersecurity teams to ensure seamless and uninterrupted operations. This is a hybrid position which requires employee presence 50-100% of the time. Duties & Responsibilities • Manage Windows updates, assist with Exchange Management console., • Manage IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs., • Design, develop, and deploy modular cloud-based systems., • Responsible/Accountable for server/application builds and qualifications for manufacturing and site cloud applications., • Manage Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways., • Maintain all system backups and participate in Disaster Recovery planning and execution., • Analyze, troubleshoot, and remediate server hardware/system related issues., • Support existing systems - proactively manage and maintain multiple systems to ensure performance and availability., • Work independently on assignments where considerable judgment and initiative are required in resolving problems and making choices, recommendations, or decisions., • Provide Level 3 support to users., • Provide off-hours support on a rotating basis as needed., • Collaborate with partners and customers to identify, scope, plan and execute digital modernization and asset life cycle management activities., • Ensure efficient functioning of data storage and process functions in accordance with company security policies and best practices in on-premise and cloud security., • Provides ownership and accountability for Asset Life Cycle Management within ServiceNow., • Owns Active Directory, Time synchronization with NTP, Network Domain and Domain Controllers in Windows environment., • Interact with clients, provide cloud support, and make recommendations based on client needs., • Performing/Assist in cloud infrastructure upgrades and updates to maximize system efficiency while minimizing downtime., • Work closely with IT Specialists, Engineering, Quality Assurance, and Validation teams in assessment, recommendation and implementation of computerized system applications that supports site Business and Manufacturing processes., • Bachelor's degree in Computer Science or Information Technology preferred; in lieu of a degree, a minimum of 3–5 years of high-level, hands-on IT experience is required., • Azure, AWS, or GCP certifications preferred., • Strong problem-solving skills, firm understanding of how to properly troubleshoot problems with as minimal client impact as possible, • Excellent project management, verbal communication, documentation, and technical writing skills, • Strong technical problem-solving abilities, written and verbal communication skills, • Demonstrated success of leading effectively in a complex matrix project team environment, • Team player with an emphasis on both knowledge sharing and learning, • Knowledge of Windows Operating System, Domains, and Group Policies, • Knowledge of Networking, Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways, • Experience and/or substantial understanding of industrial IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs, • Experience with Data accessing, storing and security within a cloud environment, • Skilled in Active Directory, Time synchronization with NTP, Network Domain, Domain Controllers, Networks, and Databases, • Ability to work in a diverse work environment, manage multiple priorities, and at times, be self-directed, • Familiar with cyber security best practices and industry-standard tools, • Experience with VPN, Routers, and Routing Protocols, • Perform in depth systems analysis on a multitude of technology devices, operating systems and software., • Ability to document, create, analyze and test computer systems, programs, software., • Exceptional understanding of advanced networking, including on-premise/cloud enterprise-grade infrastructure, as well as cloud-based network 'appliances' and interfaces, • Knowledge of integrating networking basics and virtual networks with cloud services, • Familiar with common languages (i.e. Python, Java, Golang, or Ruby) used in cloud computing, • In-depth, advanced understanding of the AWS/Azure ecosystem and technologies and how to apply them in reliable and efficient means are a strong plus, • Hands-on experience with Cisco appliances, ability to work within the CLI, are a strong plus Office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding is required. Work Environment This position is based indoors and the employee will primarily be working with others, but also independently. This position requires employee presence, on site 50-100%. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. Travel <5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Supervisor of Special Inspections is a Licensed Civil Engineer (PE) who serves as the project engineer in-responsible-charge of CME’s contracted special inspections and structural tests. Responsibilities • Initial set-up and management of the Project Special Inspections Program, • Act as a consultant on construction related problems, failures or issues, • Attend pre-installation conferences and relay Inspection Program requirements to team, • Technical review of test/inspection reports for compliance with the construction contract documents and the New York Building Codes, • Perform on-site inspections and report results, • Certification of the Inspection/Testing Program at project completion, • Act as liaison with Registered Design Professionals and Code Enforcement Officials, • Serve as Owner's Agent in execution of the Special Inspections Program and exercise duty of care to the public, • Manage non-conformance list, prepare project test & inspection plans, • Assist in the prevention of construction material failures and workmanship problems, • Bachelor’s degree, Civil Engineering or related, • Registered Professional Engineer (PE) or current Engineer-in-Training (EIT) with goal of earning PE, • Experience with building codes and standards governing special inspections and structural tests, • A friendly, forthright, diplomatic, and communicative business demeanor Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR DfLLKOgvno

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Computer / Electrical Engineer for Summer 2026. As an intern you will gain hands-on experience with our custom hardware and software products. You can expect to gain meaningful technical experience while helping us accelerate our product development, production, and deployment of our state-of-the-art sensor network. Location: This position is onsite in the Syracuse, NY office. As a Computer/Electrical Engineering Intern, you will… • Evaluate next generation hardware, analyze results and make recommendations to the design team., • Collaborate across engineering disciplines to develop and test advanced sensor products., • Work in a motivated, cross-disciplinary team passionate about solving challenging problems and delivering results., • Receive mentorship, guidance, and constructive feedback from experienced engineers. Responsibilities: • Support the design team by performing design verification testing of our next generation prototype hardware., • Make enhancements to software used to characterize and calibrate custom hardware components and complex sensor systems., • Work in a lab environment using digital scopes, signal generators, network analyzers, and temperature chambers., • Interface with lab equipment to automate testing., • Perform analysis of data collection results and make recommendations to the design team., • Support next generation sensor integration, test, and design verification activities including field test events centered around evaluation of drone target detection and tracking performance. Required Qualifications: • Enrolled in an accredited degree program majoring in Computer Engineering or Electrical Engineering., • Completed Sophomore year or greater by Summer 2026., • A minimum grade point average of 3.4. Recent transcript is required with application (unofficial transcripts are acceptable), • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration., • Strong desire to learn and great communication skills., • Some experience working in one or more of the following languages: Python, MATLAB, C, C++, or VHDL., • Must be a U.S. Citizen, • Ability to travel up to 10% Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $23.00 to $27.00 an hour. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. #LI-DNI

Job Description Position Overview: Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Staff Software Engineer who has a proven track record of leading teams and deploying software products, and who is interested in solving challenging problems in Counter Unmanned Airborne Systems (C-UAS) and Unmanned Aircraft System Traffic Management (UTM). The ideal candidate will have experience working with radars and related sensor technology, an interest in UAS technology and 10+ years of professional experience in software development. This role offers an exciting opportunity to be part of a dedicated and driven team developing cutting-edge technologies that enable the safe integration of drones into everyday life and industry. Location: This position can be hybrid and/or onsite in Syracuse, NY office. Responsibilities: • Lead the design, development and oversee the lifecycle of software products., • Collaborate with cross-functional teams to gather requirements, architect solutions, and implement features., • Serve as a technical advisor and mentor to engineering teams, providing guidance on architecture, coding standards, and development methodologies., • Drive the adoption of new technologies and processes to improve efficiency and quality., • Identify and address technical challenges, proposing innovative solutions to improve system performance, reliability, and scalability., • Work closely with product managers, designers, and other stakeholders to gather requirements and translate them into technical specifications., • Implement security best practices throughout the development lifecycle to protect data and systems., • Ensure compliance with relevant industry standards and regulatory requirements., • Lead initiatives to improve development processes, tools, and infrastructure, promoting automation and efficiency. What We’re Looking For: • Proven track record of leading technical projects and mentoring engineering teams., • Excellent problem-solving skills and ability to think critically and strategically., • Strong communication and collaboration skills, with the ability to work effectively in a team-oriented environment., • Commitment to continuous learning and staying current with industry trends and emerging technologies. Required Qualifications: • Bachelor’s degree in Computer Science, Software Engineering, Computer Engineering, or related field with strong programming background., • 10+years of related professional experience., • Experience with architecting scalable cloud based systems in containerized environments., • Proficiency in developing on Linux-based operating systems, • Expertise in C++ and Python application development, • Strong experience with schema design and use of SQL and NoSQL databases (e.g., PostgreSQL, MySQL, MongoDB)., • Experience working with sensor devices and building scalable IoT architectures., • Deep understanding of software architecture, design patterns, and best practices., • Experience with mobile app development., • 10% travel Preferred Qualifications: • Master’s degree., • Proficiency in developing on Ubuntu., • Experience with mobile app development. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $132,000 to $169,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description We are looking for an experienced Transmission and Distribution Engineer to join our rapidly growing T&D team. The ideal candidate will have a background in both Overhead and Underground design and the ability to lead projects, mentor younger staff, and serve as the point of contact for Clients. This position will oversee multiple projects of various complexities, from Concept Design through Construction and As-Built. Duties: • Oversee design of projects including new lines, rebuilds, overhead and underground transmission and distribution., • Mentor younger staff and perform reviews of design drawings and documents., • Develop and manage project schedules, estimates, cashflows and invoicing., • Work with Program Manager to prioritize workload and manage deliverables., • Serve as main point of contact to the client for project., • Minimum of 7 years in Transmission and Distribution Design., • Valid PE license, NY is strongly preferred., • Excellent communication skills., • Experience in Project Management., • Proficiency working with PLS-CADD, AutoCAD Civil 3D, MFAD, CYMCAP and other industry software. Salary Range: $95,000 to $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescriptionThe Control Systems Sales Engineer is responsible for developing and securing automated control system projects across commercial, industrial and manufacturing applications. This role focuses on creating innovative process control solutions while maintaining strong profitability. The ideal candidate will combine deep technical knowledge of industrial automation with consultative sales skills to solve complex client challenges. Key Responsibilities • Develop and secure profitable automation and control system projects while meeting quarterly and annual sales targets, • Design and propose integrated control solutions building automation systems, • Create detailed technical proposals including system architecture, scope of work, and accurate cost estimates, • Provide technical guidance on process optimization and control strategies, • Conduct site surveys to assess existing systems and recommend improvements, • Stay current with industrial automation trends and new control technologies, • Develop and maintain relationships with system integrators and end users, • Provide technical presentations and demonstrations of control system solutions, • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field preferred, • 3+ years of technical sales and estimating experience in industrial automation, • Computer networking and server knowledge a plus, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Strong presentation and interpersonal communication abilities, • Experience with major automation platforms (e.g., Allen Bradley, Siemens, Honeywell), • Knowledge of industrial networking and communication protocols, • Understanding of manufacturing processes and industrial applications, • Competitive base salary with performance-based incentives, • Comprehensive medical and dental benefits (employer/employee contribution), • 401(k) plan with company contribution, • Paid Time Off (PTO) and sick days, • 6 paid holidays, • Career advancement opportunities tied to company growth

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking a full-time Senior Project Environmental Scientist or Engineer to join our Environmental Service Group in our Syracuse, New York office. Responsibilities include, but are not limited to: • Managing and serving as technical expert on regulatory compliance projects spanning a variety of technical areas such as petroleum and chemical bulk storage, storm water, hazardous waste, etc., • Complete marketing and business development activities, • Provide proposal development, project estimating, and technical document preparation, • Complete field activities, • Prepare various technical reports, permits, and plans, • Overseeing project financials and staff execution of project tasks, • Complete quality assurance review of others’ work, • Knowledge of local, state, and federal environmental regulations, • 8+ years of experience in environmental consulting including environmental permitting & compliance, report writing, data management & interpretation, project coordination, and managing clients preferred, • A bachelor’s degree in environmental science, environmental, civil, or chemical engineering, geology or related programs, • Strong technical writing, analytical, and problem-solving skills, • A valid driver’s license, • A willingness to travel and undertake overnight travel, if necessary $90,000 - $105,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Syracuse, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Sales Engineer II is responsible for elevating awareness to Stark's Compression core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. The Sales Engineer will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. What are we looking for: • Bachelor's Degree in engineering., • Five (5) years' experience in pumps and/or blower systems., • Five (5) years' experience in sales engineering., • A proven track record in account management., • Knowledge of construction/industrial industry. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. This is a base salary, and the position also includes eligibility for a variable sales bonus. There is potential for a sales start-up assistance program. Job Posted by ApplicantPro

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Develop innovative RF subsystem and system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Support or perform project planning, execution, and oversight, • A desire to lead development projects and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Bachelor's degree in Electrical Engineering, or a related technical field., • 5+ years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking a full-time Project Environmental Scientist or Engineer to join our Environmental Service Group in our Syracuse, New York office. Responsibilities include, but are not limited to: • Managing and serving as technical expert on regulatory compliance projects spanning a variety of technical areas such as petroleum and chemical bulk storage, storm water, hazardous waste, etc., • Complete marketing and business development activities, • Provide proposal development, project estimating, and technical document preparation, • Complete field activities, • Prepare various technical reports, permits, and plans, • Overseeing project financials and staff execution of project tasks, • Complete quality assurance review of others’ work, • Knowledge of local, state, and federal environmental regulations, • 5+ years of experience in environmental consulting including environmental permitting & compliance, report writing, data management & interpretation, project coordination, and managing clients preferred, • A bachelor’s degree in environmental science, environmental, civil, or chemical engineering, geology or related programs, • Strong technical writing, analytical, and problem-solving skills, • A valid driver’s license, • A willingness to travel and undertake overnight travel, if necessary $70,000 - $90,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Chipton-Ross is seeking a Manufacturing Engineer for an onsite contract opening in Syracuse, NY. REQUIREMENTS Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Bachelors Degree is Required. Prefer candidates with 10 years of industrial experience Aerospace Degrees are not eligible, this is not an Aerospace position. RESPONSIBILITIES Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Green Belt and/or Lean Manufacturing understanding desired. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that improve product performance. May help incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations. DESIRED Hiring Manager would consider early career candidates with a Manufacturing, Mechanical, or Industrial Engineering Degree and at least 5-7 years of hands on experience Green Belt and/or Lean Manufacturing understanding desired. EDUCATION Bachelor's Degree is Required SHIFT 4/10 - 1st Shift

Job Description Quality Engineer Liverpool, NY Applies quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality for make and/or buy products. Performs technical evaluations including product requirements, specifications, models/designs, drawings and procedures. Collaborates with program management, engineering, manufacturing, supply chain and customers on quality related issues to ensure quality standards are in place. Engages in product failure investigations, material review board decisions and corrective/preventive action. Ensures corrective measures meet acceptable reliability standards and/or are compliant with requirements. Develops strategies and systems designed to improve internal and/or supplier performance and productivity. Evaluates quality systems for deficiency identification and correction. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts product quality tests, performs statistical analysis to assess products or materials that do not meet required standardsand specifications. Engages in supplier selection process and maintain certification programs. Basic Qualifications: • Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience, • Quality Engineering skills as related to electro-mechanical assembly operations including the ability to interpret engineering drawing/build instruction/process procedures and develop inspection processes and methodologies and determine product compliance., • Experience in performing Root Cause Analysis and identification of corrective actions using structured methods, such as DUO, Fault Tree Analysis, Fishbone Diagrams, DOE, etc., • Experience performing audits, and participating in third party/customer audits, • Use of MS Office (Word, Excel, PowerPoint), • Ability to obtain a secret clearance. Desired Skills: • DoD contract experience, • IPC 610/620 and J-STD-001 standard certification, • Experience interfacing with Government Customer Representatives, • AS9102 FAI experience, • Excellent communication skills, • ISO/AS9100 knowledge, • Ability to interface with multiple stakeholders including Military Customers, effectively work in cross-functional teams, and communicate with positive impact #ZR

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Syracuse, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description AAC (Advanced Automation Corporation) has a requirement for a Radar Field Service Engineer to support OCONUS installation and testing activities for the upgraded TPS-43 radar system. This position will begin with on-site OJT at the OEM in Syracuse, NY then on-site OCONUS, which would last multiple months at a time. This position requires strong leadership abilities to represent the company and the OEM while working with a cross-functional installation team. The chosen candidate will have the following duties and responsibilities: Responsibilities & Duties • Provide support for the assembly, test, and installation of upgraded TPS-43 radar systems, • Support system integration and testing, • Collaborate with cross-functional teams to support the in-country installation and training Minimum • Experience trouble shooting hardware, software, and mechanical problems., • Knowledge of radar signal processing techniques., • Experience with antenna design and optimization., • Knowledge of electromagnetic compatibility and interference., • Bachelor's degree in Electrical Engineering, Physics, or a related field., • 5+ years of professional experience in radar system design and development., • Strong analytical skills and experience with simulation tools., • Excellent written and verbal communication skills., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan - 401k with matching contributions, • Employer Paid Life Insurance (Basic), • FSA (Flexible Spending Account), • Generous Paid Time Off, • Paid Holidays (7 Paid Holidays), • AFLAC (Supplementary Insurance), • Tuition Reimbursement Program, • Situational Telework EEO Statement Advanced Automation Corporation is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, age, sexual orientation, gender identity, status as a protected veteran, or status as a qualified individual with a disability.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Perform trade studies and develop RF system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Assist with or provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to owe projects assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, or a related technical field., • 3-5years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • 10% travel Preferred Qualifications: • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $89,000 to $110,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job DescriptionDescription: Job Summary: The Manufacturing Engineer position is quite varied regarding the scope of work performed. This position is responsible for creating and enhancing processes and systems by leveraging new technologies and automation. This position will research automation techniques, test new systems for efficiency and assist in the planning of factory layouts to optimize production. Requirements: Essential Functions of Position: • Work with design engineers to improve product design for ease of manufacturing and assembly., • Analyze production processes, schedules, methods and other data and then provide management with reports containing the data and statistics to enable management to better understand future requirements needed to improve/ optimize the manufacturing process., • Analyze and plan workflow, equipment placement and space requirements to improve manufacturing efficiency, • Analyze production data for improvement, • Coordinate equipment, maintenance and repairs to ensure manufacturers procedures and instructions are followed in order to keep production equipment operational., • Maintain manufacturing process documentation (SOP’s), including technical reports and process specifications, • Ensure quality is maintained, • Collaborate with other engineering resources to ensure efficient production, • The ideal candidate has a strong understanding of manufacturing equipment and processes, excellent problem-solving abilities, and a keen eye for detail., • Associates degree in relevant field with related work experience., • Knowledge of how mechanical systems and processes work., • Comfortable working in a fast-paced environment., • Exceptional organizational and time management skills, • Bachelor's in mechanical or industrial engineering, • Required to sit, stand, and walk; for up to 8 hours per day., • Ability to work in a high volume and high stress environment., • Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment., • Ability to lift up to 20 pounds occasionally., • Ability to communicate professionally, in written and oral communications.

Job Description Civil Engineer - Site Utility Design Luxus Group | Syracuse, NY Position Type: Full-Time Salary: $90,000 - $115,000 per year (commensurate with experience and skills) Reports To: Partners Directed By: Partners/Associates/Project Managers Position Summary: Luxus Group seeks a New York State-licensed Civil Engineer with 10-15 years of experience, specializing in site utility design. This role requires expertise in a variety of project types and sizes, working collaboratively with a multidisciplinary team of Architects, Landscape Architects, and Engineers. Projects include commercial, retail/office, hospitality, collegiate, medical, military, transit, and municipal work across New York State. The Civil Engineer will take primary responsibility for delivering a full range of civil engineering services, from project inception to post-occupancy. This includes serving as the main point of contact for project stakeholders, including owners, consultants, code enforcement officials, and contractors. Luxus Group offers a competitive salary, benefits package, and opportunities for professional growth. Essential Functions: Design/Construction Documents: • Programming and Planning, • Site and Environmental Analysis, • Schematic Design, • Site Engineering, • Cost Estimating and Analysis, • Code Research, • Design Development, • Construction Documents, • Materials Research, • Specification Writing, • Bidding and Contract Negotiation, • Construction Phase Office Support, • Project Management, • Proficiency in AutoCAD Civil 3D, • Expertise in layout, planting, grading, storm conveyance systems, and stormwater management facility design, • Strong graphic skills, including hand drawing and sketching (a plus), • Excellent written and verbal communication skills, • Ability to work collaboratively with team members and consultants, • Demonstrated job knowledge and judgment, • Strong oral, written, and graphic communication skills, • Positive attitude and flexibility, • High productivity and work quality, • Effective client relations If you're passionate about civil engineering and excited to work on a variety of impactful projects across New York State, we encourage you to apply!

Job DescriptionDescription Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the region’s most impactful infrastructure efforts: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in AutoCAD/Civil 3D and MicroStation/OpenRoads, • Estimated Salary Range: $97,760 - $120,640/year* WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy & Commissioning team. LaBella’s Energy & Commissioning team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary range: $80,000.00 - $100,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Our Client is seeking a Project Engineer - Water/Wastewater to join their growing team in Syracuse, NY! Water and wastewater management presents unique challenges from environmental, health, and economic issues, to regulatory concerns. Our water management experts comprehend these complexities and apply their expertise in all areas of feasibility, design, and master planning, taking into consideration the value of water as a precious natural resource. Our qualified professionals develop creative and effective solutions for any water management project and are dedicated to ensuring that communities receive safe, consistent water and wastewater distribution, collection, and treatment. Responsibilities • Independently apply extensive and diversified knowledge of principles and practices in broad areas of assignments., • Prepare advanced engineering designs and/or technical data for completion and accuracy., • Utilize advanced techniques, theories and practices to complete assignments., • Design and review complete project documents for conformity and quality assurance., • Develop and apply new and/or improved techniques, processes, etc., for designing engineering plans., • Analyze and interpret data, formulate and solve problems., • Prepare or review scopes of work and budgets, and schedule assignments., • Prepare proposals to provide professional services., • Provide direction to engineers, technicians and administrative staff., • Plan and coordinate detailed aspects of engineering work., • Represent the organization in a variety of ways as an expert on engineering assignments., • Work within AutoCAD Civil 3D and alongside the design team managers to successfully complete projects within established budgets and deadlines., • Perform field investigations/ site visits as needed., • Prepare comprehensive draft proposals and change orders for review., • Prepare conceptual layouts in consultation with PM or client., • Review hydraulic calculations., • Review utility layouts., • Conduct team and select client meetings., • Provide technical guidance to Engineers and Senior Engineers., • Prepare and review pump station designs., • Review and respond-to contractor shop drawing submittals, RFIs, and change order requests, with assistance from PM., • Process contractor requests for payment, with assistance from PM. Qualifications • Bachelor of Science degree in environmental engineering or civil engineering., • FE preferred., • PE preferred., • 4-6+ years of experience in the civil/environmental engineering field with a concentration in water/wastewater design., • Experience, including linear (pipeline) work required., • Some experience with pump station design, water & wastewater treatment systems design preferred., • Experience with AutoCAD & OpenRoads is desired., • Excellent communication skills., • Design experience with water and wastewater treatment plant processes and design., • Ability to read, write,and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum transportation experience including Precast concrete design engineering, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description LaBella has an immediate opening for a Team Leader in our Municipal Group. Reporting to the Discipline Leader, this position is responsible for leading a team of project managers, design professionals and technical support staff working with public sector (Municipal and State agency) clients and projects throughout the NY. The position is in our Syracuse, NY office. Essential Duties & Responsibilities: • Project development, client interaction, project management and technical design primarily for public sector clients (municipal, county, state and non-profit)., • Project management responsibilities include development of professional services proposals, management of projects and clients, development of technical approaches to projects, and participation in public presentations/engagement process., • Develop projects with clients and then oversee and manage the project design and construction while interfacing with the client., • Bachelor’s degree in civil or environmental engineering, • 15-20 years of practical experience in a professional consulting environment, • Registration as a Professional Engineer (PE) NY is required., • Candidate must be experienced in civil/environmental engineering with a preferred focus on all facets of municipal/public works engineering and water resources infrastructure., • Effective communication skills using oral, graphic, and written forms., • Ability to perform assigned tasks with minimal supervision., • Ability to travel to project sites and work remotely as needed., • Ability to manage workload and budgets as allocated., • Effective verbal and written communication skills and the ability to collaborate efficiently with teammates in different disciplines and different locations., • Able to interact effectively with clients, project teams, and colleagues internally., • Experience in project management and solid project financial management skills., • Communications and analytical/problem solving skills are essential. Preferred Qualifications: Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Senior Digital Hardware Engineer who will apply their skills and experience to lead the design of custom hardware and firmware for cutting-edge sensor and communication systems. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Derive and document Digital Hardware system requirements working collaboratively with multiple technical disciplines, • Define custom multi-layer PCB architectures and perform part selection, schematic design, and aid in layout activities, • Perform functional test and verification activities for new hardware and aid in production transition and support, • Architect and design HDL solutions for the latest Xilinx FPGAs and SoC devices such as Ultrascale+ and RFSoCs, • Design and implement efficient solutions for data acquisition, digital signal processing, command and control, external hardware interfaces, and high-speed communication protocols, • Use scripting languages such as Python and Bash to automate and improve workflows, • Perform integration and test of hardware and HDL designs at subsystem and system levels, • Provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 5+ years related professional experience, • PCB design experience including the design of digital and analog circuits including FPGAs, microcontrollers, memories, and high-speed data converters, • Familiarity with VHDL and/or Verilog to configure FPGAs and other embedded systems, • Applied experience testing and validating analog and digital hardware using oscilloscopes, network analyzers, logic analyzers, spectrum analyzers, etc., • 10% travel. Preferred Qualifications: • Experience with Altium design environment, • Experience with modern Xilinx FPGAs and the Vivado design environment, • Experience with Communication and Sensor systems, Digital Signal Processing, Software Defined Radios, RF System Design, • Experience providing design oversight and detailed design review feedback, • Experience with Matlab, Python, Linux Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Associate Data Engineer will be responsible for supporting the organization's data engineering activities, enterprise reporting through Microsoft Power BI, and help maintain IT/OT and data analytics applications. The ideal candidate will have experience in performing ELT/ETL processes using various data engineering tools, have a solid foundation of data warehousing concepts, and know how to build reports/dashboards using Microsoft Power BI. This is a hybrid-based position requiring employee presence, on site 50-100%. Duties & Responsibilities • Support data engineering activities and assist with maintaining existing data integrations to various systems., • Design, develop, and maintain ETL processes and data pipelines to transform data into usable information for the organization., • Assist with maintaining LOTTE's Data Warehouse and Data Lake – this also includes writing solution abstracts and documenting all associated components., • Implement best practices for data management, including data governance, data quality, and data security., • Monitor and optimize data workflows to ensure performance and scalability., • Troubleshoot and resolve data-related issues promptly., • Collaborate with cross-functional teams and stakeholders to gather and document business requirements for analytics solutions., • Design and develop interactive reports and dashboards using Power BI – tailoring them to specific stakeholder needs., • Support existing IT/OT analytic applications – assist with maintaining validated applications in an audit ready state., • Generate documentation including design specifications, work instructions, and knowledge-based articles., • Bachelor's degree in Data Engineering, Data Analytics, Computer Science or related Engineering and/or Analytics disciplines preferred., • 1-3 years of work experience in a data engineering and/or data analytics role – Biologics production (process development and/or manufacturing), or medical devices preferred and is a plus., • Proficiency with MS Office Applications, • Experience with data engineering activities, ETL/ELT processes, data integrations, and experience with APIs., • Demonstrated knowledge of Data Warehousing concepts – Audits, Fact Tables, Metric Marts, and knowledge of database administration best practices., • Experience in working with Azure Data Factory – Building, managing, and running pipelines. Connecting to a variety of data sources, on-prem and cloud., • Knowledge of SQL – Demonstrated ability to write stored procedures, functions, create/ properly use indexes, CTEs, advanced sub-queries, views, and advanced knowledge of query performance optimization., • Experienced in creating Microsoft Power BI reporting – data source modeling, DAX, and building dashboards end-to-end., • Team player – open to sharing expertise with team members and learning., • Effective communication skills with the ability to convey technical concepts to non-technical stakeholders., • Ability to work independently with minimal supervision but provide escalation when needed., • Excellent analytical and problem-solving skills., • Attention to detail and personal accountability to drive success., • Demonstrate good interpersonal skills, customer focus, and professionalism. Work within all Site Facilities, which requires one to give a high attention to detail and on occasion to properly use Personal Protective Equipment (PPE). Work Environment This position is based indoors and the employee will primarily be working with others, but also independently. This position requires employee presence, on site 50-100%. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. Travel <5% travel required for this position. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionDescription: Senior Laboratory Technician Job Description Non-Exempt / Hourly Summary (Position Description): BITZER Scroll Inc. is looking for a Senior Laboratory Technician that has a strong mechanical aptitude, is energetic and detail-oriented. In this exciting role, you are collaborating with a team of colleagues from engineering design and development to fabricate, assemble and test prototype compressors. You will also work together with production assembly and quality to execute a laboratory audit test program on production compressors to ensure conformance to strict performance requirements. Through laboratory development testing and production auditing, you will help us to continually improve and maximize the satisfaction of our customers. As a senior-level member of the Engineering Lab staff, you will also be expected to assist in training and development of less experienced technicians and engineers. You may also assist in leadership tasks such as work coordination, team communication and cross-departmental activities on a infrequent basis, as dictated by workload and staffing. Reports To: Engineering Lab Manager Pay: $25.00 - $34.50 per hour Schedule: Monday-Friday, 40 hours per week, 7:00 AM to 3:30 PM, infrequent overtime Duties and Tasks: • Work cross-functionally with design and engineering to fabricate, assemble and test prototype compressors for evaluation of reliability, manufacturability and cost effectiveness., • Modify components and assemblies using basic laboratory tools (i.e. screwdrivers, torque wrenches, presses, dial indicators, etc.)., • Efficiently and accurately execute compressor assembly and test instructions maintaining meticulously detailed records., • Conduct compressor tests using test stands and calorimeters that simulate real world HVAC systems., • Diagnose HVAC system behavior by monitoring and adjusting refrigerant charge levels to insure test parameters are stable., • Use oscilloscopes, thermocouples, instrumentation and data acquisition systems to gather data., • Assist laboratory engineer with test equipment maintenance and gage calibration. BITZER, established in 1934, provides innovative products and services for the refrigeration and air-conditioning market. Our global team of over 4000 employees delivers products that are focused on customer satisfaction. Perfection and precision shape our operations, efficiency and sustainability are our ways of thinking. BITZER Scroll Inc., a subsidiary of BITZER established in 2006, is a development and production facility located in Syracuse, NY. We are a team of over 150 people, designing, laboratory testing, machining, and assembling scroll compressors for the global commercial air-conditioning market. Preferred Qualifications: • Strong diagnostic skills in refrigeration and air-conditioning systems, compressors and components, • Strong organizational, verbal and written communication skills, • Strong desire to maintain detailed, meticulous records, • Proficient use of basic hand and power tools to assemble and fabricate with skill and dexterity, • Working knowledge of brazing and electrical wiring, • General knowledge of oscilloscopes, data acquisition systems and instrumentation techniques, • General knowledge of 5S principles and good housekeeping practices, • High school diploma with 13 years of experience in HVAC, • EPA 608 Universal certification, • Strong mechanical aptitude and interest in mechanical devices; detail-oriented · You will work in a professional office and engineering test laboratory environment. You will use standard office equipment, basic hand tools, power tools and highly specialized laboratory test equipment. · You will be on your feet in the engineering test laboratory for the majority of your work day. We will provide you with the appropriate personal protection equipment (PPE). · You may be required to lift up to 40 pounds. · There will be limited domestic travel required for training and personal development. Physical Demands: · While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, bend, stoop, use hands, and reach with hands and arms. May be required to lift up to 50 pounds. This position requires that the employee be on their feet in the laboratory for the majority of the work day. Employee Benefits: Employer paid Life Insurance, Short-Term and Long-Term Disability Benefits $7.50 a week health insurance coverage 3% Employer 401K contribution Other Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This Job Description does not imply an employment contract. BITZER Scroll is an at-will employer. BITZER Scroll is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. Requirements:

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Associate Automation Engineer is a key member of the Digital Plant team that will support manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Associate Engineer will be to design, implement and maintain systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary function will be to support the design, build, test, and maintenance of the various Allen-Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Support the design and build of vendor Rockwell PLC/ BAS roadmaps to align with site strategy., • Works with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Digital Plant PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired with 3+ years experience with PLC/BAS design/ troubleshooting/ implementation OR 7+ years experience with PLC/BAS design/ troubleshooting/ implementation, • Knowledge of PLC/BAS engineering relating to Rockwell Allen Bradley products., • Knowledge of products and technologies provided by major automation vendors, including but not limited to: Rockwell Allen Bradley, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is an office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors, and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. This position offers a hybrid work schedule, with the flexibility to work from home up to 50% of the time. Travel The position may require up to 5% of travel. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Syracuse, NY Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Interact closely with mechanical, civil, structural engineers and project architects, • Function as lead electrical engineer for multi-discipline projects, through all phases (proposal, design, bidding and construction)., • Perform code reviews., • Delegate and monitor project tasks to junior team members., • Meeting with external and internal clients., • A Bachelor’s degree is required., • A minimum of 10 years of experience working at an A/E consulting firm is required., • New York State Professional Engineer’s license is preferred., • AutoCAD and Revit experience is a plus., • Experience in electrical distribution systems, power, lighting, and utilities, as well as communications, security, and fire alarm systems are desired. Salary range: $100,000.00 - $135,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Job Title: Field Construction Inspector (FCI) Location: Syracuse, NY Job Type: Full-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Field Construction Inspector (FCI) to support railroad safety services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High school diploma or equivalent. Required Experience: Minimum 2 years of experience in one or more of the following, civil construction inspection involving grade separation projects, roadway paving/construction, utility work and/or experience with a Freight Railroad, Regional Short Line Railroad, Transit System, State DOT Highway or Rail Division, Railroad Supplier, Highway/Railroad Contractor, and/or Civil Engineering/Railroad Consultant. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the workplace and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and act before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various construction plans, OSHA/Railroad rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize workload to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables, • Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Civil Highway Construction, or Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes week(s) at a time., • Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: • Provide jobsite coordination., • Provide clear and concise communication with Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough safety briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities., • Enforce Project Site Safety in accordance Federal, State, Local and Railroad polices. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Keywords: Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flag Person, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to always remain committed to safety while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important, and no service is so urgent that we may not take the time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true to our commitment to being the leader in safety throughout the railroad industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identify, age, veteran status, national origin, or any other status protected by law or regulation. Job Posted by ApplicantPro

Bridge Project Engineer Location: [Various locations in PA, NY, TX, NC] Type: Full-time | Transportation Infrastructure Position Summary: Are you ready to lead impactful bridge and structural projects? This role offers the opportunity to design, analyze, and manage the construction and maintenance of critical infrastructure—such as bridges, buildings, and dams—that supports community growth and connectivity. The ideal candidate will bring technical excellence, innovation, and leadership to every phase of project execution. Key Responsibilities: Lead bridge design efforts, including load rating, structural analysis, and foundation design Prepare comprehensive design plans, technical specifications, reports, and cost estimates Provide technical guidance during construction, including responding to contractor questions and performing site visits to ensure adherence to design intent Conduct bridge and culvert inspections and produce related field reports Ensure all designs comply with applicable safety standards, codes, and regulations Maintain organized records of project design documents, schedules, and budget information Coordinate effectively with clients, consultants, and permitting/regulatory agencies Review internal design work for technical accuracy and ensure quality control Participate in regular project meetings and collaborate with internal teams to meet project deadlines and budget goals Mentor and provide technical direction to junior engineering staff Assist Project Manager with presentations, scheduling, and execution of project development tasks Qualifications: Bachelor’s degree in Civil Engineering (Master’s degree preferred) Professional Engineer (PE) license or the ability to obtain one 10–15 years of transportation infrastructure experience with an emphasis on structural/bridge design Proficiency with MicroStation, STAAD, and bridge design software preferred Familiarity with NYSDOT and/or PennDOT standards and procedures required Skills & Attributes: Commitment to delivering high-quality, technically sound engineering solutions Excellent collaboration, communication, and interpersonal skills Strong sense of responsibility, initiative, and ownership of assigned work Ability to think critically and solve complex engineering problems Attention to detail while balancing multiple priorities in a dynamic environment Receptiveness to feedback and continuous improvement Proficiency in Microsoft Office Suite (Word, Excel, Outlook) Compensation: Salary Range: $100,000 – $130,000 annually Actual compensation may vary based on experience, education, and other relevant factors. This range does not include the value of benefits. This is your opportunity to contribute to projects that make a lasting difference in communities. If you're passionate about infrastructure and thrive on technical challenges, this role offers a meaningful path forward. #M1 Ref: #282-Eng Pgh

Highway Project Engineer Location: [Various locations in NY, PA, TX, NC] Type: Full-time | Transportation Infrastructure Objective: Lead the design and development of highway infrastructure projects, applying advanced civil engineering and project management skills.This role plays a critical part in

Senior Laboratory Technician Job Description Non-Exempt / Hourly Summary (Position Description): BITZER Scroll Inc. is looking for a Senior Laboratory Technician that has a strong mechanical aptitude, is energetic and detail-oriented. In this exciting role, you are collaborating with a team of colleagues from engineering design and development to fabricate, assemble and test prototype compressors. You will also work together with production assembly and quality to execute a laboratory audit test program on production compressors to ensure conformance to strict performance requirements. Through laboratory development testing and production auditing, you will help us to continually improve and maximize the satisfaction of our customers. As a senior-level member of the Engineering Lab staff, you will also be expected to assist in training and development of less experienced technicians and engineers. You may also assist in leadership tasks such as work coordination, team communication and cross-departmental activities on a infrequent basis, as dictated by workload and staffing. Reports To: Engineering Lab Manager Pay: $25.00 - $34.50 per hour Schedule: Monday-Friday, 40 hours per week, 7:00 AM to 3:30 PM, infrequent overtime Duties and Tasks: • Work cross-functionally with design and engineering to fabricate, assemble and test prototype compressors for evaluation of reliability, manufacturability and cost effectiveness., • Modify components and assemblies using basic laboratory tools (i.e. screwdrivers, torque wrenches, presses, dial indicators, etc.)., • Efficiently and accurately execute compressor assembly and test instructions maintaining meticulously detailed records., • Conduct compressor tests using test stands and calorimeters that simulate real world HVAC systems., • Diagnose HVAC system behavior by monitoring and adjusting refrigerant charge levels to insure test parameters are stable., • Use oscilloscopes, thermocouples, instrumentation and data acquisition systems to gather data., • Assist laboratory engineer with test equipment maintenance and gage calibration., • Perform daily housekeeping and organization to maintain a neat and orderly work environment. Who We Are: BITZER, established in 1934, provides innovative products and services for the refrigeration and air-conditioning market. Our global team of over 4000 employees delivers products that are focused on customer satisfaction. Perfection and precision shape our operations, efficiency and sustainability are our ways of thinking. BITZER Scroll Inc., a subsidiary of BITZER established in 2006, is a development and production facility located in Syracuse, NY. We are a team of over 150 people, designing, laboratory testing, machining, and assembling scroll compressors for the global commercial air-conditioning market. Preferred Qualifications: • Strong diagnostic skills in refrigeration and air-conditioning systems, compressors and components, • Strong organizational, verbal and written communication skills, • Strong desire to maintain detailed, meticulous records, • Proficient use of basic hand and power tools to assemble and fabricate with skill and dexterity, • Working knowledge of brazing and electrical wiring, • General knowledge of oscilloscopes, data acquisition systems and instrumentation techniques, • General knowledge of 5S principles and good housekeeping practices, • General knowledge of Microsoft Excel, Word, and Outlook Requirements: • High school diploma with 13 years of experience in HVAC, • EPA 608 Universal certification, • Strong mechanical aptitude and interest in mechanical devices; detail-oriented, • Excited to be part of a cross-functional team, self-motivated, energetic and willing to learn Work Environment: • You will work in a professional office and engineering test laboratory environment. You will use standard office equipment, basic hand tools, power tools and highly specialized laboratory test equipment., • You will be on your feet in the engineering test laboratory for the majority of your work day. We will provide you with the appropriate personal protection equipment (PPE)., • You may be required to lift up to 40 pounds., • There will be limited domestic travel required for training and personal development. Physical Demands: • While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, bend, stoop, use hands, and reach with hands and arms. May be required to lift up to 50 pounds. This position requires that the employee be on their feet in the laboratory for the majority of the work day. Employee Benefits: Employer paid Life Insurance, Short-Term and Long-Term Disability Benefits $7.50 a week health insurance coverage 3% Employer 401K contribution Other Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This Job Description does not imply an employment contract. BITZER Scroll is an at-will employer. BITZER Scroll is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.

Skills and Experience: Required Qualifications: Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. Job Description: We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. Perform sch