Trabajos design engineer en Orange, New JerseyCrear alertas

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work Lockheed Martin Rotary & Mission Systems is seeking a full-time Senior Radar Systems Engineer. In this role, you will lead the design, analysis, testing, and requirements development and verification of high performance Radar Signal Simulation and Processing systems. The successful candidate will have experience and/or knowledge of Radar Signal Simulation & Processing, MATLAB Simulation Development, Requirements Development and Testing and Model Based System Engineering. This position is located at a facility that requires special access and will require a government security clearance. U.S. Citizenship is required. #REAS Qualifications: • Bachelor's degree in Electrical or Computer Engineering or equivalent technical discipline, • Five or more years of Systems Engineering experience, • Experience developing system and software requirements and associated analysis and testing, • Ability to obtain & maintain a DoD Security Clearance at the SECRET level. U.S. Citizenship is required.

Job Description: What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work We are seeking an experienced Electrical Engineer to support multiple programs in the Integrated Warfare Systems & Sensors business. This position requires knowledge of electrical engineering principles, working in a team environment, and general knowledge of other related disciplines. Specific tasking will be but not limited to overall design of launcher electrical systems, including the selection and use of Commercial Off the Shelf components, custom hardware design, and setting requirements for chassis/enclosure design. Responsibilities include: • Support the electrical design sustainment of the MK41 Vertical Launching System and new and exciting designs of the next generation of launcher and weapon systems across various platforms., • Apply electrical engineering and electronics skills and have applicable knowledge of other related disciplines supporting successful design activities., • Coordinate with more senior internal or external personnel on significant technical matters., • Conduct or participate in the design, development, and testing of electronic and electrical components, sub-systems and systems., • Develop technical documentation such as initial design specifications, schematics, assembly drawings and parts list as well as preparing test procedures and reports to ensure customer and company requirements are met. Position is located in Moorestown, NJ. Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Moorestown, NJ is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. #rmshotmiljobs #rmslaunchers Qualifications: • Bachelor Degree or higher in Electrical Engineering or other related engineering or scientific field, • Minimum 2 years professional experience, • Experience supporting multi-disciplinary engineering teams in electronic system development, • Working experience in one or more of the following technical areas:, • Electrical System Integration/Development, • Complex Cable Design, • Printed Wiring Board (PWB) Design, • Circuit Card Assembly Design, • Electrical Bonding and Grounding of Enclosures, • FPGA Selection/Programming, • Ability to obtain & maintain a DoD clearance at the SECRET level

The Role We are seeking Senior Quant Engineer to join our Quantitative Research & Investments Technology (QRIT) team in Fidelity Asset Management Technology. This role will partner with the quant research and investments teams to design, build, enhance, and support a comprehensive Systematic Fixed Income research and portfolio construction ecosystem. This individual will include hands on development collaborating with team of software engineers and quantitative developers. The Expertise and Skills You Bring * Bachelor’s degree in a computational field such as Computer Science, Master’s degree is preferred * Minimum of 3 years of proven professional experience working in financial services (Asset Management experienced preferred) * Proven experience engaging with senior internal and external clients and partners * Experience with Python and micro-services / RESTful APIs * Experience integrating data services with Excel or other UI like angular is a plus * Prior quant dev experience with Fixed Income asset class is a plus * Experience working on AWS cloud environment and working knowledge of CI/CD & DevOps * Strong experience in system architecture, design patterns and software engineering fundamentals such as OOP, functional programming, data modeling. * Advanced understanding of data structures * Demonstrated experience with portfolio construction and/or portfolio optimization is a plus * Proven ability to capture requirements and formulate plans by partnering with various stakeholders * Strong communication, interpersonal and relationship building skills to influence decisions and engage across Fidelity and at all levels of the organization The base salary range for this position is $97,000-185,000 USD per year. Placement in the range will vary based on job responsibilities and scope, geographic location, candidate’s relevant experience, and other factors. Base salary is only part of the total compensation package. Depending on the position and eligibility requirements, the offer package may also include bonus or other variable compensation. We offer a wide range of ___ to meet your evolving needs and help you live your best life at work and at home. These benefits include comprehensive health care coverage and emotional well-being support, market-leading retirement, generous paid time off and parental leave, charitable giving employee match program, and educational assistance including student loan repayment, tuition reimbursement, and learning resources to develop your career. Note, the application window closes when the position is filled or unposted. Please be advised that Fidelity’s business is governed by the provisions of the Securities Exchange Act of 1934, the Investment Advisers Act of 1940, the Investment Company Act of 1940, ERISA, numerous state laws governing securities, investment and retirement-related financial activities and the rules and regulations of numerous self-regulatory organizations, including FINRA, among others. Those laws and regulations may restrict Fidelity from hiring and/or associating with individuals with certain Criminal Histories. Information Technology

As a Lead Software Development Engineer, it’s up to you to define, design and refine the tech that keeps us one step ahead of listeners. As a Lead Software Development Engineer, you will. Experience leading engineering teams as a mentor or tech lead.

Job Description Specialized Recruiting Group is hiring for a full time Water/Wastewater Project Engineer on a full-time, direct basis in Newark, NJ Our client is an ENR Top 500 consulting engineering firm founded more than five decades ago. This role offers the opportunity to contribute to meaningful water and wastewater infrastructure projects while advancing your career within a supportive, team-oriented environment. Primary Responsibilities: • Prepare engineering designs, technical specifications, and construction documents for water distribution systems, wastewater collection systems, and treatment facilities, • Perform hydraulic and hydrologic modeling to evaluate and optimize system performance and capacity, • Ensure compliance with local, state, and federal regulations, including coordination of environmental permitting requirements, • Bachelor’s degree in Civil, Mechanical, Environmental, or related Engineering discipline, • Minimum of 7 years of progressive experience in water/wastewater engineering, including design and project coordination, • Active Professional Engineer (PE) license required #2722 PandoLogic. Keywords: Wastewater Engineer, Location: Newark, NJ - 07108 , PL: 603410623

Seeking a skilled AI Prompt Engineer / AI Solutions Specialist with strong expertise in Microsoft Copilot Studio, Azure OpenAI, and Prompt Engineering to design and implement enterprise-grade Generative AI solutions for banking and financial services use cases.

Position Overview: As a key member of the geotechnical design and value-engineering team, you will support subsurface investigations, foundation and excavation design, construction monitoring, and contractor support services across public and private infrastructure projects. You will collaborate closely with senior engineers, geologists, contractors and clients to ensure technically sound, cost-effective, and constructible solutions that align with project goals and regulatory requirements. Key Responsibilities: • Conduct subsurface explorations (soil borings, test pits), evaluate soil and rock mechanics, groundwater conditions, seismic risk and site suitability., • Assist in foundation engineering, support-of-excavation and retaining-structure design for commercial, industrial, retail, residential and public-sector developments., • Provide construction-phase services including QA/QC of earthwork, foundations, retaining systems, dewatering, and shoring; document field conditions and respond to contractor/agency feedback., • Bachelor’s (or Master’s) degree in Civil or Geotechnical Engineering or related discipline., • EIT (Engineer?in?Training) or ability/desire to pursue PE licensure., • Field and office experience in subsurface investigation, foundation/excavation design, and construction monitoring., • Proficiency with engineering software (e.g., AutoCAD, Microsoft Office) and strong written/verbal communication skills.

Please send current resumes directly to Bhagyashree Yewle, Principal Lead Recruiter - YOH SPG Contract Senior Data Engineer – Airflow, DBT Core, Kubernetes/OpenShift - Hybrid Onsite in Jersey City, NJ Location: Jersey City, NJ // Hybrid: 3 days a week Open to W2 and CTC contractors - MUST HAVE HANDS ON Apache Airflow DAG development, dbt Core, Kubernetes, on-prem OpenShift experience MUST HAVE SKILLS • 10+ years of professional experience in data engineering, designing and supporting enterprise-scale data platforms in production environments, • The role requires hands-on experience with DBT and Apache Airflow deployed on Kubernetes, specifically within an on-prem OpenShift environment., • This position involves closer interaction with infrastructure, including Kubernetes operations, Airflow design and implementation, and hands-on dbt model development in an on-prem setup. Estimated Min Rate: $56.00 Estimated Max Rate: $80.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice:

Job Title: QA Automation Engineer II Location: Jersey City, NJ(Hybrid) Duration: 6+ Months (Extendable) ("US citizens and Green Card Holders and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time.”) A reasonable, good faith estimate of the minimum and maximum hourly rate on W2 for this position is $55 to $65 with limited benefits. Job Description: Top Skills: Selenium, Automation testing, Java/C#, API Testing, UI Testing, JMeter, SQL(Database Testing), Python Key Experiences: • 9+ years of proven experience in the software development industry, participating in a team environment., • 5+ years of experience in UI automation, such as Selenium WebDriver., • 5+ years of proven experience in testing web services such as RESTful API., • 3+ years of proven experience in performance testing using tools such as Apache JMeter (nice to have)., • 2+ years of working in a cloud-based development and production environment such as AWS., • 3+ years of proven experience with programming languages such Java/C#. Familiarity with Python is a plus. Seeking candidates with solid coding proficiency in Java or C#., • Proficient with both SQL and NoSQL databases., • Experienced working in Continuous Integration/Continuous Deployment (CI/CD) environments., • Having AWS/Cloud technologies and AI/ML powered applications knowledge are big plus. Key Responsibilities: • Design and execute functional and automation testing for applications., • Develop and execute automated test scripts using testing tools; document and summarize results., • Build, update, and maintain UI automation test cases using Selenium with C# (flexibility to learn C# if not already proficient)., • Perform manual API testing using tools such as Postman or Insomnia., • Perform API automation testing using industry-standard frameworks and tools., • Participate actively in Agile ceremonies (daily stand-ups, sprint planning, retrospectives)., • Collaborate closely with Development and Business teams to ensure project success., • Quickly adapt to new technologies and tools (e.g., Amazon Web Services)., • Work with SQL and NoSQL databases for backend validation and robust data testing., • Create comprehensive end-to-end test plans, test specifications, and test case templates., • Develop and document detailed test plans and test cases., • Facilitate defect tracking, reporting, and resolution management., • Review requirements (Functional Specifications, User Stories, Change Requests) to ensure full coverage., • Identify and manage test data; prepare automation-ready test cases., • Conduct system testing, regression testing, and support User Acceptance Testing (UAT)., • Apply test case design techniques (e.g., boundary value analysis, equivalence partitioning)., • Implement Shift Left Testing practices by participating in early requirement and design reviews, writing acceptance criteria up front, and integrating automated tests in CI/CD pipelines., • Be actively involved in the deployment process, collaborating with DevOps and engineering teams to ensure smooth releases. Nice to Have: • Experience with application monitoring tools (e.g., New Relic, Datadog, CloudWatch)., • Working knowledge of Python for scripting and automation., • Familiarity with AWS services for cloud-based testing and deployment., • Hands-on experience with performance and load testing using JMeter, • Experience with testing AI/ML-powered applications, including validating model outputs, creating test datasets, evaluating model performance.

ELECTRICAL ENGINEER/DESIGNER(ASSOC DEGREE, B.S E.E)SALARY 80-100K SCHEMATICS/WIRING Growing equipment company needs someone to design new electrical schematic diagrams from existing OEM ones. Will utilize Solidworks Electrical to design, oversee testing of electrical systems, assisting shop floor personnel in troubleshooting electro-mechanical problems. Will document bills of materials, assembly instructions, test instructions, corrected schematic diagrams, and provide audits and revisions of schematics. Position will require 2+ years experience in electro-mechanical design of equipment. Should be able to read electrical schematics, mechanical prints, and technical documents. Please email

CSI Companies is seeking an experienced GCP Security Engineer to support the design and implementation of secure cloud environments. This role focuses on embedding security and compliance guardrails into Google Cloud Platform deployments to ensure onboarding is secure by default and audit ready. This opportunity is ideal for a hands on cloud security professional who is comfortable translating security requirements into practical technical solutions and driving implementation across enterprise cloud environments. You will partner with engineering and security teams to establish scalable standards improve compliance posture and support secure cloud adoption. Hours: Standard business hours Location: Onsite in Jersey City Pay: $50–70/hr Position Type: Consultant Work Authorization Candidates must be authorized to work in the United States without the need for current or future sponsorship. What you will do • Translate security and compliance requirements into technical guardrails using policies and baselines, • Configure and enforce GCP organizational policies and control frameworks, • Define encryption standards key management patterns and secrets handling approaches, • Establish logging monitoring and audit evidence retention standards, • Support implementation of IAM hardening and secure access controls, • Drive exception handling risk acceptance workflows and remediation tracking, • Collaborate with engineering teams to ensure secure cloud onboarding practices, • Implement practical security controls that align with enterprise requirements, • Support audit readiness and improve overall compliance posture What we are looking for • 5 or more years of experience in cloud security or related disciplines, • Strong experience with Google Cloud Platform, • Experience implementing cloud security guardrails and policy controls, • Strong understanding of IAM security logging and monitoring requirements, • Experience with Terraform and infrastructure as code, • Experience with Python for automation or scripting, • Strong understanding of security control mapping and audit processes, • Ability to translate security requirements into implementable technical solutions, • Strong problem solving and communication skills Nice to have • Experience with threat modeling, • Experience with vulnerability management integration, • Experience with incident response practices, • Experience working in enterprise cloud transformation programs Who Should Apply This role is ideal for a GCP security engineer who enjoys building secure cloud foundations and driving compliance through practical engineering solutions. About Us The CSI Companies is a leading staffing and recruiting firm providing organizations with highly skilled professionals since 1994. We have been recognized as a Best of Staffing award winner for over a decade and pride ourselves on delivering exceptional talent nationwide. Benefits Offered • Weekly pay, • Medical dental and vision coverage, • Voluntary life and AD and D coverage, • Paid training, • Opportunity for advancement upon performance and availability

The Director of Engineering provides strategic and operational leadership for all engineering functions at a high-volume precision metal stamping manufacturer serving the automotive, electronics, and medical device industries. This executive-level role is responsible for driving product and process innovation, ensuring compliance with industry-specific quality and regulatory requirements, and developing a high-performing engineering team. The Director partners closely with Sales, Quality, Operations, and executive leadership to deliver competitive, manufacturable solutions that exceed customer expectations. KEY RESPONSIBILITIES Strategic Leadership & Business Development • Define and execute the engineering roadmap aligned with company growth objectives across automotive, electronics, and medical device markets., • Serve as the primary engineering liaison for key customer accounts during quoting, design, and program launch phases., • Evaluate and recommend capital equipment investments (progressive dies, transfer presses, automation) to expand manufacturing capabilities., • Oversee tooling design and die engineering for progressive, compound, and transfer dies used in high-precision stamped metal components., • Lead Design for Manufacturability (DFM) reviews and tolerance stack-up analyses for new part programs., • Drive Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) submissions for automotive customers (IATF 16949)., • Ensure engineering compliance with ISO 13485 design controls for medical device component programs., • Recruit, mentor, and manage a team of tool designers, process engineers, and manufacturing engineers., • Establish individual development plans, performance goals, and career advancement pathways., • Ensure all engineering activities comply with IATF 16949 (automotive), ISO 9001 (general), and ISO 13485 (medical device) quality management systems., • Lead root-cause analysis and corrective action (8D, CAPA) for engineering-related customer escapes., • Maintain complete and audit-ready DHF (Design History Files) and technical documentation for regulated industries., • Manage engineering project portfolios from concept through production launch, meeting cost, timing, and quality targets., • Coordinate new model introductions (NMI) and engineering change management (ECN) across internal and customer systems., • Support Operations with press setup optimization, tooling maintenance programs, and troubleshooting of high-volume production issues., • Oversee supplier tooling builds and subcontracted engineering services; conduct supplier technical reviews and audits. REQUIRED QUALIFICATIONS • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or closely related field (Master's preferred)., • 10+ years of progressive engineering experience in precision metal stamping, sheet metal fabrication, or closely related metal forming disciplines., • 5+ years of direct people management experience, including hiring and developing engineering staff., • Demonstrated experience supporting at least two of three target industries: automotive, electronics, or medical devices., • Deep proficiency in progressive and/or transfer die design, tooling materials, and press mechanics., • Working knowledge of APQP, PPAP, FMEA, control plans, and GD&T (ASME Y14.5)., • Familiarity with IATF 16949 or ISO 13485 quality management requirements., • Proficiency with CAD software (SolidWorks, AutoCAD, or equivalent) and CAM/simulation tools., • Strong project management skills with experience managing multiple concurrent programs. PREFERRED QUALIFICATIONS • Professional Engineer (PE) license or Six Sigma Black Belt / Green Belt certification., • Experience with automation integration (robotic part handling, vision systems, in-die sensing)., • Knowledge of surface finishing, plating specifications, and secondary operations common in electronics and medical components., • Familiarity with ERP/MRP systems (SAP, Epicor, or similar) in a job-shop or high-volume stamping environment., • Experience with Design of Experiments (DOE) and statistical process control (SPC). CORE COMPETENCIES • Technical Expertise in Metal Forming, • Cross-Functional Collaboration, • Customer Relationship Management, • Data-Driven Decision Making, • Strategic Thinking & Innovation, • Talent Development & Coaching, • Regulatory & Quality Mindset, • Change Management WORK ENVIRONMENT & PHYSICAL REQUIREMENTS This position operates in both an office/engineering environment and on the manufacturing floor. The Director is expected to spend regular time on the production floor engaging with press operators, toolmakers, and quality personnel. Ability to walk production areas, stand for extended periods, and observe precision stamping operations is required. Occasional lifting up to 30 lbs. PPE (safety glasses, hearing protection, steel-toed footwear) required in production areas.

We are seeking an experienced Reporting & Observability Engineer with strong expertise in Grafana to design, develop, and support enterprise dashboards and reporting solutions. Develop real-time and historical reporting solutions for IT Operations, SRE, and Platform Engineering teams. Reporting, Mon

Our manufacturing client in Irvington, NJ is looking for a Manufacturing Engineer to support the rubber injection molding operations for medium voltage electrical products by optimizing production processes, troubleshooting equipment, and ensuring high-quality output. This person will act as a "bridge" between product development and production. Monday-Friday, start time 8am Salary starting from $135,000/year, commensurate with experience Responsibilities to include: • Coordinate with production floor staff to identify and trouble-shoot issues, taking corrective and proactive actions to ensure quality., • Utilization of CAD to create, modify, analyze, and optimize designs, significantly improving engineering productivity and design accuracy. Some small fixture design will be required., • Conduct root cause analysis to identify production issues related to quality, efficiency, or equipment failures; implement corrective actions effectively., • Develop and maintain process control plans, inspection criteria, and SOP's for molded components., • Collaborate with QC to investigate non-conformances., • Participate in new product introduction and process qualification activities., • Collaborate with cross-functional teams to drive continuous improvement and reduce scrap and to improve automation and productivity., • Lead project scheduling efforts for new product introductions and process upgrades, ensuring timely completion within budget constraints., • Bachelor's degree in Mechanical, Industrial or Chemical Engineering required, • 3+ years experience working within a manufacturing facility required, • Strong proficiency using CAD software required., • Knowledge of lean manufacturing methodologies and continuous improvement strategies., • Ability to perform root cause analysis using structured problem-solving techniques., • Effective communication skills to collaborate across departments including manufacturing operations and engineering teams. This position is integral to maintaining high-quality production standards while fostering innovation through advanced manufacturing techniques., • Bilingual a plus, • Knowledge of rubber and/or plastic injection molding operations highly desired.

About Us At Selective, we don't just insure uniquely, we employ uniqueness. Selective is a midsized U.S. domestic property and casualty insurance company with a history of strong, consistent financial performance for nearly 100 years. Selective's unique position as both a leading insurance group and an employer of choice is recognized in a wide variety of awards and honors, including listing in Forbes Best Midsize Employers in 2025 and certification as a Great Place to Work in 2025 for the sixth consecutive year. Employees are empowered and encouraged to Be Uniquely You by being their true, unique selves and contributing their diverse talents, experiences, and perspectives to our shared success. Together, we are a high-performing team working to serve our customers responsibly by helping to mitigate loss, keep them safe, and restore their lives and businesses after an insured loss occurs. Overview "Applicants must be authorized to work for any employer in the United States. Selective will not sponsor or assume the sponsorship of an employment visa at this time". Note for NJ candidates: This role will be located at our future headquarters in Short Hills, N.J. Until the new headquarters is operational, the successful candidate will be offered the ability to work in our Branchville, N.J. location during this interim period. We are seeking a highly experienced and knowledgeable Senior Identity and Access Management Specialist (IAM) to join our IAM team. This role is an individual contributor role, and the ideal candidate will have 5-7 years of experience implementing enterprise-level IAM solutions and collaborating across departments to optimize lifecycle identity management, access governance, and compliance. This role will focus on shaping our organization's IAM roadmap, designing, implementing, and maturing our IAM systems to strengthen security, optimize access management, ensure regulatory compliance, and provide strategic IAM guidance. Responsibilities • Evaluate and recommend Identity Governance and Administration (IGA) solutions to support enterprise-wide IAM objectives., • Design and implement automated identity lifecycle workflows, including provisioning, de-provisioning, and access reconciliation., • Establish and maintain API-based integrations for IGA functionalities, including access requests and reporting., • Enforce access controls aligned with least privilege, segregation of duties, and identity governance best practices., • Implement access re-certification processes to ensure compliance with regulatory requirements and internal policies., • Define and enforce role-based access control (RBAC) models to align with organizational needs and security standards., • Perform periodic assessments to optimize IAM processes, mitigate risks, and identify improvement opportunities., • Develop metrics and reports for senior leadership to measure IAM performance and compliance., • Collaborate with stakeholders, including Human Resources, Application Development, and Infrastructure teams, to design and optimize IAM solutions., • 5-7 years of experience in cybersecurity and with IAM practitioner experience., • Proven experience configuring and integrating IAM platforms using solutions like Microsoft Entra ID (Azure AD), Okta, Ping Identity, SailPoint, Saviynt, or ForgeRock., • Relevant industry certifications such as CIAM, CISSP, CRISC, SailPoint Identity Certified Implementation Engineer, Okta Certified Administrator, or similar preferred., • Experience implementing regulatory requirements such as 23 NYCRR 500, HIPAA, GLBA, and SEC cybersecurity rules., • Experience with identity lifecycle management processes and workflows, access provisioning/deprovisioning, and user account management across multiple systems., • Strong understanding of IAM principles, including RBAC, ABAC, PAM, SSO, MFA, and directory services., • Experience with emerging IAM trends, including password-less authentication, zero trust, and advanced access control concepts., • Hands-on experience with scripting languages (e.g., PowerShell, Python) for IAM automation., • Solid knowledge of identity federation protocols and standards. (e.g., LDAP, SCIM, SAML, OAuth, OpenID Connect) and API integrations., • Excellent analytical and problem-solving skills., • Strong communication, interpersonal, leadership, and stakeholder engagement skills. Selective Insurance offers a total rewards package that includes a competitive base salary, incentive plan eligibility at all levels, and a wide array of benefits designed to help you and your family stay healthy, achieve your financial goals, and balance the demands of your work and personal life. These benefits include comprehensive health care plans, retirement savings plan with company match, discounted Employee Stock Purchase Program, tuition assistance and reimbursement programs, and 20 days of paid time off. Additional details about our total rewards package can be found by visiting our ___. The actual base salary is based on geographic location, and the range is representative of salaries for this role throughout Selective's footprint. Additional considerations include relevant education, qualifications, experience, skills, performance, and business needs. Pay Range USD $130,000.00 - USD $176,000.00 /Yr. Additional Information Selective is an Equal Employment Opportunity employer. That means we respect and value every individual's unique opinions, beliefs, abilities, and perspectives. We are committed to promoting a welcoming culture that celebrates diverse talent, individual identity, different points of view and experiences - and empowers employees to contribute new ideas that support our continued and growing success. Building a highly engaged team is one of our core strategic imperatives, which we believe is enhanced by diversity, equity, and inclusion. We expect and encourage all employees and all of our business partners to embrace, practice, and monitor the attitudes, values, and goals of acceptance; address biases; and foster diversity of viewpoints and opinions. For Massachusetts Applicants It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

About Us At Selective, we don't just insure uniquely, we employ uniqueness. Selective is a midsized U.S. domestic property and casualty insurance company with a history of strong, consistent financial performance for nearly 100 years. Selective's unique position as both a leading insurance group and an employer of choice is recognized in a wide variety of awards and honors, including listing in Forbes Best Midsize Employers in 2024 and certification as a Great Place to Work in 2024 for the fifth consecutive year. Employees are empowered and encouraged to Be Uniquely You by being their true, unique selves and contributing their diverse talents, experiences, and perspectives to our shared success. Together, we are a high-performing team working to serve our customers responsibly by helping to mitigate loss, keep them safe, and restore their lives and businesses after an insured loss occurs. Overview Note: (For NJ candidates) This role will be located at our future headquarters in Short Hills, N.J. Until the new headquarters is operational, the successful candidate will be offered the ability to work in our Branchville, N.J. location during this interim period. Selective Insurance is looking for a Site Reliability Engineer (SRE) to lead the design, implementation, and optimization of scalable, resilient, and secure infrastructure systems. This role requires deep expertise in systems engineering, infrastructure automation, and reliability practices, with a strong focus performance optimization. As a technical leader, the SRE will collaborate closely with architecture and development teams to ensure solutions align with SRE principles and operational excellence. Also drive continuous improvements in system resilience, observability, security, and automation, leveraging advanced data analytics and enhance service delivery and reliability. The SRE will also serve as a trusted advisor across the organization, offering expert-level consulting in cloud infrastructure, CI/CD pipelines, monitoring, and incident response. A strong understanding of business-critical applications and alignment with organizational goals is essential, along with a commitment to compliance with legal, regulatory, and security standards Responsibilities • Define and measure service reliability through SLIs, SLOs for various application in Selective, • Leverages logs, traces, and metrics to extract actionable insights, proactively identify system anomalies, and drive continuous improvements in system health, performance, and reliability., • Perform capacity planning, conduct performance profiling, and execute system tuning to support scalability, enhance reliability, and optimize system performance across distributed environments., • Collaborate with Agile teams to ensure new features meet reliability and performance standards, • Participate in incident response, and postmortem analysis to drive continuous improvement, • Implement and maintain observability tools, • Ensure compliance with security, legal, and regulatory requirements, • 5+ years of experience in SRE, DevOps, or systems engineering roles., • Experience with CI/CD pipelines and infrastructure-as-code tools Selective Insurance offers a total rewards package that includes a competitive base salary, incentive plan eligibility at all levels, and a wide array of benefits designed to help you and your family stay healthy, achieve your financial goals, and balance the demands of your work and personal life. These benefits include comprehensive health care plans, retirement savings plan with company match, discounted Employee Stock Purchase Program, tuition assistance and reimbursement programs, and paid time off plans. Additional details about our total rewards package will be provided during the recruiting process. The actual base salary is based on geographic location, and the range is representative of salaries for this role throughout Selective's footprint. Additional considerations include relevant education, qualifications, experience, skills, performance, and business needs. Pay Range USD $119,000.00 - USD $163,000.00 /Yr. Additional Information Selective is an Equal Employment Opportunity employer. That means we respect and value every individual's unique opinions, beliefs, abilities, and perspectives. We are committed to promoting a welcoming culture that celebrates diverse talent, individual identity, different points of view and experiences - and empowers employees to contribute new ideas that support our continued and growing success. Building a highly engaged team is one of our core strategic imperatives, which we believe is enhanced by diversity, equity, and inclusion. We expect and encourage all employees and all of our business partners to embrace, practice, and monitor the attitudes, values, and goals of acceptance; address biases; and foster diversity of viewpoints and opinions.

Senior Electrical Engineer This Jobot Job is hosted by: Jim Forman Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $155,000 - $175,000 per year A bit about us: We are seeking a dynamic and motivated Electrical Engineer to join our fast-paced engineering team. This role offers a fantastic opportunity for an experienced professional to work on a variety of projects, applying their expertise in electrical design, circuit design, and consulting. The successful candidate will be responsible for designing and developing electrical systems, working closely with various teams to ensure project objectives and timelines are met. The role requires a deep understanding of BIM, Arcc Flash, AutoCAD or Revit. Why join us? This is a fantastic opportunity for an experienced Electrical Engineer to join a dynamic and innovative team, working on a variety of exciting projects. If you have the required skills and experience, we would love to hear from you. Job Details Responsibilities: • Design and develop complex electrical systems and circuits, ensuring compliance with all relevant regulations and standards., • Use software such as AutoCAD or Revit to create detailed electrical design drawings., • Conduct detailed calculations to establish manufacturing, construction, and installation standards and specifications., • Collaborate with multidisciplinary project teams, providing electrical engineering expertise., • Use BIM and Arcc Flash for effective project management and coordination., • Provide consulting services to clients, advising on best practices, potential improvements, and cost-effective strategies., • Conduct thorough inspections to identify faults and issues, implementing corrective actions where necessary., • Stay updated with the latest advancements in electrical engineering and propose new innovative solutions to improve project efficiency and effectiveness., • Bachelor’s degree in Electrical Engineering or a related field from an accredited institution., • A minimum of 5 years of experience in electrical engineering, specifically in design and consulting., • Proficient in the use of design software such as AutoCAD or Revit., • Extensive experience with BIM and Arcc Flash., • Proven experience in developing complex electrical designs and circuit designs., • Excellent analytical and problem-solving skills., • Strong communication and consulting skills, with the ability to effectively present complex technical information., • Detail-oriented with a strong focus on quality and accuracy., • Ability to manage multiple projects concurrently and meet tight deadlines., • Professional Engineering (PE) license is preferred. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

TERRITORY: Northern NJ, Long Island NY, Rye NY Salary Range: $29.00 to $32.00 per hour (Starting Range) Final pay determinations will depend on various factors, including, but not limited to experience level, education, knowledge, skills, and abilities. Our benefits and programs are comprehensive and thoughtfully crafted to ensure our colleagues live healthy lives and have support when it matters most. Please note: This position cannot provide employment-based immigration sponsorship now or in the future. Applicants must be currently authorized to work in the United States for any employer and must be able to maintain that authorization for the entire duration of employment without requiring employer sponsorship at any time, including in the instance when your current work authorization expires. We ask that candidates answer all work authorization questions fully and accurately during the application process. The Field Service Engineer is responsible for providing technical direction and support to customers on operation and maintenance of company products. Serve as customer contact on technical and service-related problems. Demonstrate uses and advantages of products. Work closely with sales and marketing, QA/QC and research and development to address customer concerns, determine corrective action and customer follow-up. May be responsible for a designated region. • Install, check out, operate, maintain, repair, and upgrade equipment within time requirements established by service management., • Provide preventative maintenance in accordance with published procedures., • Keep performance and maintenance records on the equipment., • Provide guidance and training to customer personnel in establishing operation, maintenance, inspection procedures, and techniques., • Analyze equipment failures to determine cause and recommend corrective action., • Advise and assist in effecting design changes to improve equipment efficiency and/or reduce cost of operations., • May participate in installation planning phase., • Maintain customer good will through: effective communication of all services rendered; effective communication of on-site arrival time; effective and early communication of late on-site arrival time; effective communication of service and operator issues; effective presentation of positive attitude for the company, products, employees, and customers; and maintaining a proper business appearance as defined by service management., • Effectively manage company assets to include company vehicle, computer, trunk stock parts inventory, test equipment and tools. All employees are responsible for ensuring the compliance to company documents, programs and activities related to the Health, Safety, Environment, Energy, and Quality Management Systems, as per your roles and responsibilities. • High School Diploma (Electrical Training and/or Experience strongly preferred), • Minimum of 1 year working in a similar field-based, troubleshooting/repair position in the electro-mechanical field., • Computer skills are essential. Must be familiar with Microsoft Windows operating system and Microsoft Office applications, including Word, Excel, PowerPoint, and Access, • Valid driver's license and clean driving record., • Able to obtain credit approval for Corporate Credit card., • Good verbal and written communication skills, • Independent Thinking, • Detail Oriented, • Strong Problem-solving skills., • Able to lift 50 pounds - Must be able to bend, push and so forth., • Manual Dexterity, • Willingness to work up to and over 8 hours/day. 40 hours/week, weekends, holidays, and after-hours., • Occasional overnight travel., • Must maintain all requirements for access to customer sites, including active and current compliance with all credentialing requirements (may include COVID-19 and annual influenza vaccinations), in order to perform the essential functions of the role at customer locations., • Participates in any and all reasonable work activities as assigned by management. We offer an excellent salary and benefits package including medical, dental and vision coverage, as well as life insurance, disability,401K with company contribution, andwellness program. Please note that joining our team does not create a guaranteed or permanent employment arrangement. All employment is atwill, meaning both the employee and Fresenius Kabi have the right to end the employment relationship at any time, in accordance with applicable federal and state laws. Fresenius Kabi is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, citizenship, immigration status, disabilities, or protected veteran status.

About Us At Selective, we don't just insure uniquely, we employ uniqueness. Selective is a midsized U.S. domestic property and casualty insurance company with a history of strong, consistent financial performance for nearly 100 years. Selective's unique position as both a leading insurance group and an employer of choice is recognized in a wide variety of awards and honors, including listing in Forbes Best Midsize Employers in 2025 and certification as a Great Place to Work in 2025 for the sixth consecutive year. Employees are empowered and encouraged to Be Uniquely You by being their true, unique selves and contributing their diverse talents, experiences, and perspectives to our shared success. Together, we are a high-performing team working to serve our customers responsibly by helping to mitigate loss, keep them safe, and restore their lives and businesses after an insured loss occurs. Overview "Applicants must be authorized to work for any employer in the United States. Selective will not sponsor or assume the sponsorship of an employment visa at this time". Note: (For NJ candidates) This role will be located at our future headquarters in Short Hills, N.J. Until the new headquarters is operational, the successful candidate will be offered the ability to work in our Branchville, N.J. location during this interim period. Selective Insurance is seeking an energetic and collaborative Data Engineer Specialist to work on Data and Analytics projects supporting the Claims Analytics team within the Information Management group. This group is responsible for all Data Engineering, Machine Learning Engineering, Analytics and Reporting for the Claims business area. The candidate must be hands-on with expert technical skills and a proven track record of project delivery. Responsibilities • Hands on development and support of new or existing data applications., • Works closely with the lead to create/review low level implementation designs, understand high level data flow designs developed by Data Architects., • Provide technical guidance to the team and work on implementing complex data solutions., • Provide support in the design, development, code reviews, test deploy and documentation of Data Engineering and Data Integration Applications., • Scaling and optimizing schema and performance tuning SQL and ETL pipelines in data lake and data warehouse environments., • Provide technical leadership and mentor junior data engineers., • Work closely with Product Owners, Product Managers, Program Manager, Scrum Master, and Team Members in a Scaled Agile framework., • Closely monitor the health of data pipelines and develop contingency plans for failures., • Maintain detailed documentation to support downstream integrations., • 5-7 of experience in Data Warehousing, Data integration or Data Engineering projects, • Ability to effectively work well with people in other departments and/or outside of the enterprise., • Expert-level proficiency inPython, SQL, and Spark; strong experience withcloud platforms(Azure, AWS, or GCP)., • Expert level experience in Databricks and Delta Lake., • Proven track record of buildingenterprise-scale data platformssupporting advanced analytics and machine learning., • Experience withstreaming architectures(Kafka, Kinesis) andevent-driven data processing., • Strong knowledge ofdata security, encryption, and access controlin regulated environments., • Advanced working knowledge of SQL and optimizing queries and databases for performance., • Ability to debug and resolve complex issues internally and work with external vendors and service providers., • Good understanding and hands on experience in developing and managing CI/CD pipelines, • Good understanding of Data Structures and Data Models., • P&C Insurance experience is highly desired., • Bachelor's degree in computer science or related engineering field preferred., • Certifications in cloud platforms (e.g., AWS Certified Data Analytics, Azure Data Engineer Associate) Selective Insurance offers a total rewards package that includes a competitive base salary, incentive plan eligibility at all levels, and a wide array of benefits designed to help you and your family stay healthy, achieve your financial goals, and balance the demands of your work and personal life. These benefits include comprehensive health care plans, retirement savings plan with company match, discounted Employee Stock Purchase Program, tuition assistance and reimbursement programs, and 20 days of paid time off. Additional details about our total rewards package can be found by visiting our ___. The actual base salary is based on geographic location, and the range is representative of salaries for this role throughout Selective's footprint. Additional considerations include relevant education, qualifications, experience, skills, performance, and business needs. Pay Range USD $123,000.00 - USD $157,000.00 /Yr. Additional Information Selective is an Equal Employment Opportunity employer. That means we respect and value every individual's unique opinions, beliefs, abilities, and perspectives. We are committed to promoting a welcoming culture that celebrates diverse talent, individual identity, different points of view and experiences - and empowers employees to contribute new ideas that support our continued and growing success. Building a highly engaged team is one of our core strategic imperatives, which we believe is enhanced by diversity, equity, and inclusion. We expect and encourage all employees and all of our business partners to embrace, practice, and monitor the attitudes, values, and goals of acceptance; address biases; and foster diversity of viewpoints and opinions. For Massachusetts Applicants It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Locations US-PA-Philadelphia | US-NJ-Newark Requisition ID 2026-12423 Category Virtual Design and Construction Are you looking for a highly rewarding opportunity that provides extensive career growth opportunity? Gilbane is seeking a VDC Engineer I to support constructability and coordination tasks on a project by using technology and processes. This role will sit in the office and on job sites as determined by project needs. Who are we? As a Top-10 ENR Contractor, Gilbane is a family-owned business with 45 offices that has been shaping communities since 1870. Consistently recognized as one of the most reputable construction management firms in the country, Gilbane is committed to delivering projects safely and on-time. You will have the opportunity to build schools, labs, hospitals, corporate offices, sports arenas and more! We are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Who are you? You are someone who acts inclusively, showing empathy and treating others with respect and dignity in order to uphold Gilbane's core value of Caring and "People First" workplace culture. You seek to listen in order to understand and can convey information clearly. You're a strong problem solver who can identify, prioritize, and implement alternatives for solutions, and you demonstrate adaptability by collaborating with others and supporting team members to achieve excellence. A self-starter who shows passion, commitment, and ownership all while delivering on business outcomes and driving results. You're someone who identifies opportunities for new and improved ways of doing things that result in value-add solutions. Your core values match Gilbane's: Integrity, Caring, Teamwork, Toughmindedness, Dedication to Excellence, Discipline, Loyalty, and Entrepreneurship. What's in it for you? Gilbane offers employees multi-dimensional training opportunities through a number of resources for those that are early in their career. While managing your responsibilities to the project, you will be able to enroll in trainings through our award-winning Gilbane University to build leadership and technical skills. In addition, VDC Engineer I's work under the direction of experienced VDC Engineers on each job site which provides you with opportunity to learn new industry skills every day. You will protect and promote the interests of both Gilbane and the client in all matters as well as demonstrating the personal characteristics of a developing leader. Utilizes 3D design software to identify, communicate, and resolve project challenges • Combines all building discipline models into 3D design software coordination model, • Reviews coordination models for constructability issues utilizing the software's clash detection capabilities, • Assigns responsible party(s) for issue resolution; verifies and documents with meeting minutes, submittals, RFIs, and updated models, • Communicates with internal and external project teams; facilitates meetings to resolve project issues, review schedules, or other project documentation, • Utilizes Reality Capture technology, such as laser scanning and drones, to support project deliverables, • Participates in Business Unit (BU) office and department activities including orientation programs, training sessions, and peer group meetings, • Bachelor's degree in Architecture, Engineering, Building Information Modeling (BIM) or related field, • 0-1 years of VDC Coordination experience, • Strong problem-solving skills, • Strong time-management and analytical skills, • Knowledge and functional use of BIM design software, • Basic understanding of construction documentation, • Strong interest in design concepts and integrated building components and systems, • Strong leadership, communication, and organizational skills For (Philadelphia) this ranges from $70,000-$86,500 plus benefits and retirement program. Gilbane offers an excellent total compensation package which includes competitive health and welfare benefits and a generous profit-sharing/401k plan. We invest in our employees' education and have built Gilbane University into a top training organization in the construction industry. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Gilbane is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Note to Recruiters, Placement Agencies, and Similar Organizations: Gilbane does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our jobs alias, website, or to any Gilbane employee. Gilbane will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Gilbane and will be processed accordingly. We can recommend jobs specifically for you! Click here to get started.

About Us At Selective, we don't just insure uniquely, we employ uniqueness. Selective is a midsized U.S. domestic property and casualty insurance company with a history of strong, consistent financial performance for nearly 100 years. Selective's unique position as both a leading insurance group and an employer of choice is recognized in a wide variety of awards and honors, including listing in Forbes Best Midsize Employers in 2025 and certification as a Great Place to Work in 2025 for the sixth consecutive year. Employees are empowered and encouraged to Be Uniquely You by being their true, unique selves and contributing their diverse talents, experiences, and perspectives to our shared success. Together, we are a high-performing team working to serve our customers responsibly by helping to mitigate loss, keep them safe, and restore their lives and businesses after an insured loss occurs. Overview "Applicants must be authorized to work for any employer in the United States. Selective will not sponsor or assume the sponsorship of an employment visa at this time". Note for NJ candidates: This role will be located at our future headquarters in Short Hills, N.J. Until the new headquarters is operational, the successful candidate will be offered the ability to work in our Branchville, N.J. location during this interim period. As Lead Software Engineer, you will drive technical direction and execution for robust, scalable, and maintainable enterprise software solutions within our cloud-first environment. You will champion engineering discipline by enforcing coding standards, architectural principles, and best practices throughout the development lifecycle. This role is pivotal in guiding engineers, conducting thorough code reviews, leading by example in modern engineering practices, and fostering a culture of continuous improvement and technical excellence. You will also architect and integrate AI-powered features using Azure AI Services, helping deliver intelligent solutions that align with our business objectives. Responsibilities • Lead the design, development, and deployment of cloud-native, full-stack applications with .NET and Azure, ensuring scalability, performance, and reliability., • Establish and enforce coding standards, design patterns, and architectural guidelines across software projects., • Champion best practices in automated testing, CI/CD pipelines, Infrastructure-as-Code (Terraform, Bicep, ARM), and rigorous documentation., • Architect and integrate AI capabilities using Azure AI Services (Cognitive Services, ML, OpenAI, Bot Services) for predictive analytics, NLP, and intelligent automation., • Conduct code reviews, provide constructive feedback, and mentor engineering talent in cloud-native, AI, and agile delivery practices., • Collaborate with product, QA, and cross-functional teams to clarify requirements, refine technical solutions, and deliver features aligned to business needs., • Continuously evaluate and adopt new technologies, tools, and methodologies to improve productivity, quality, and security., • Bachelor's or Master's degree in Computer Science, Engineering, or a related discipline., • 7+ years of hands-on experience in software engineering and architecture, with deep knowledge of .NET (C#, ASP.NET Core) and Azure cloud services., • Advanced proficiency in Azure AI Services for developing and deploying enterprise AI-driven solutions., • Expertise in microservices, API-first design (REST/GraphQL), event-driven systems, and container orchestration (Docker, Kubernetes)., • Proficiency in DevOps, CI/CD, Infrastructure-as-Code, and Agile/Scrum/SAFe methodologies., • Strong code review, testing, problem-solving, and leadership skills., • Experience integrating AI features via REST APIs or SDKs into business applications., • Business Process Management (BPM) implementation experience, especially with Pega, is a plus., • Experience in regulated industries (e.g., Property & Casualty insurance) preferred. Nice to Have • Experience with Python, and familiarity with machine learning/deep learning frameworks such as TensorFlow and PyTorch., • Hands-on with additional BPM tools (Camunda, Appian)., • Front-end frameworks (Angular, React), advanced SQL, and data streaming technologies (Kafka, RabbitMQ)., • Knowledge of data privacy, compliance, and security requirements for cloud and AI adoption. Selective Insurance offers a total rewards package that includes a competitive base salary, incentive plan eligibility at all levels, and a wide array of benefits designed to help you and your family stay healthy, achieve your financial goals, and balance the demands of your work and personal life. These benefits include comprehensive health care plans, retirement savings plan with company match, discounted Employee Stock Purchase Program, tuition assistance and reimbursement programs, and 20 days of paid time off. Additional details about our total rewards package can be found by visiting our ___. The actual base salary is based on geographic location, and the range is representative of salaries for this role throughout Selective's footprint. Additional considerations include relevant education, qualifications, experience, skills, performance, and business needs. Pay Range USD $130,000.00 - USD $168,000.00 /Yr. Additional Information Selective is an Equal Employment Opportunity employer. That means we respect and value every individual's unique opinions, beliefs, abilities, and perspectives. We are committed to promoting a welcoming culture that celebrates diverse talent, individual identity, different points of view and experiences - and empowers employees to contribute new ideas that support our continued and growing success. Building a highly engaged team is one of our core strategic imperatives, which we believe is enhanced by diversity, equity, and inclusion. We expect and encourage all employees and all of our business partners to embrace, practice, and monitor the attitudes, values, and goals of acceptance; address biases; and foster diversity of viewpoints and opinions. For Massachusetts Applicants It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Position: Software Engineer III Location: Newark, NJ - Hybrid Duration: 12 months RTH Here is What You Can Expect on a Typical Day • Build applications ensuring that the code follows the latest coding practices and industry standards, using modern design patterns and architectural principles; remove technical impediments, • Develop high-quality, well-documented, well documented and efficient code adhering to all applicable Prudential standards, • Collaborate with product owners in understanding needs and defining feature stories, tech leads in defining technical design, and other team members to understand the system end-to-end and deliver robust solutions that bring about business impact, • Write unit, integration tests, and functional automation, researching problems discovered by quality assurance or product support, and developing solutions to address the problems, • Bring a strong understanding of relevant and emerging technologies, provide input and coach team members, and embed learning and innovation in the day-to-day, • Work on complex problems in which analysis of situations or data requires an evaluation of intangible variables., • Use programming languages, including but not limited to Python, Java, or JavaScript, and React, Springboot, frameworks The Skills & Expertise You Bring • Bachelor of Computer Science or Engineering, or experience in related fields, • 6+ years of hands-on experience building enterprise-grade applications using modern Java and JavaScript ecosystems, • Experience with agile development methodologies and Test-Driven Development (TDD), • Knowledge of business concepts, tools, and processes that are needed for making sound decisions in the context of the company's business, • Ability to learn new skills and knowledge on an ongoing basis through self-initiative and tackling challenges, • Excellent problem-solving, communication, and collaboration skills, • Advanced experience and/or expertise with several of the following:, • Programming Languages: Python, Java, JavaScript; Typescript, C#, working in distributed systems, object-oriented programming, design patterns, and design methodology; JAVA services using Spring, Maven, Microservices, multi-threading, Concurrency, and parallel processing, • Frameworks: React, Springboot, Flask, Django, Node.js (Run time), • Data Store: NoSQL or Relational Data structures - PL/SQ, DB2, Oracle, Postgres, RedShift, • Data Streaming: SQS, Kinesis, AWS MSK, Event Bridge, • Application Programming Interfaces (API): Consumption & Development; implementing service-oriented architecture (SOA) patterns; Web service technologies such as APIs, REST, JSON, SOAP, XML, JDBC, MySQL, • API Management & Integration: Kong, Apigee, • Unit, interface, and end user testing concepts and tooling (functional & non-functional), • Automated testing, • Accessibility awareness, • Software security skills, including secure coding, web application security, and DevSecOps; Solid grasp of security concepts (authentication, authorization, encryption, digital signature, JWT), SSL, web service proxies, firewall, SAML 2.0, OpenID Connect, and OAuth 2.0), • DevOps Tools & Practices: Branching techniques and usage of GitHub, Bitbucket, or Subversion; DevOps, Jenkins, • Software Development Life Cycle (SDLC): Monitoring and logging techniques, • AWS Core Services across compute, storage, DB, IAM, and analytics, including specific services listed above, • Preferred Qualifications:, • Strong experience with Domain Driven Development (DDD), • AWS cloud native solution development, • Architecture Patterns, • Design and Critical Thinking, • Financial/Insurance industry experience is a must, not a plus, • Experience with agentic frameworks and AI-driven development tools is a Must. [Claude Code, GitHub Copilot etc]

Title: Lead Solutions Engineer - Data Marketplace Duration: 6 months Location: Hybrid in Washington, NJ (3 days onsite per week) Role Summary We are seeking a Solutions Engineer with strong Informatica platform experience and deep automation and integration engineering expertise to design, architect, and deliver end-to-end solutions that enable an enterprise data marketplace and broader data platform capabilities. This role is hands-on and cross-cutting, requiring the ability to architect solutions both within Informatica-including metadata, catalog, integration, governance, data quality, and automation capabilities-and outside of Informatica, integrating with cloud platforms, data engineering ecosystems, analytics tools, and AI-enabled services. The role requires broad technical depth, strong architectural judgment, and a focus on building automated, scalable, and resilient integrations. You will partner closely with product managers, platform teams, data engineers, security, governance, and business stakeholders to evolve the data marketplace and supporting enterprise data services. Key Responsibilities Solution Architecture & Design • Architect end-to-end data marketplace and data platform integrations spanning Informatica products and non-Informatica enterprise tooling., • Design scalable, secure, and reliable architectures with an automation-first and integration-by-design mindset., • Define reference architectures, integration patterns, and extensibility models for marketplace, metadata, governance, and data product use cases. Informatica Platform Enablement, • Design and implement solutions using Informatica capabilities such as data integration, metadata management, data catalog, governance, data quality, and automation services., • Configure and extend Informatica platforms to enable automated data product onboarding, discovery, lineage capture, access workflows, and marketplace interactions., • Partner with Informatica product and professional services teams to close functional gaps, extend platform capabilities, or enable bespoke integrations when required. Automation & Integration Engineering, • Design and build automated integrations across Informatica and enterprise platforms using APIs, events, workflows, and orchestration frameworks., • Enable automation across the data product lifecycle, including onboarding, metadata synchronization, lineage propagation, access provisioning, and de-provisioning., • Build reusable integration components and automation frameworks that reduce manual effort and improve reliability and consistency., • Apply infrastructure-as-code, configuration-as-code, and workflow automation patterns where appropriate. Marketplace & Platform Development, • Lead the design and evolution of internal data marketplace services, APIs, and supporting platform components., • Build and validate proof-of-concepts to de-risk architectural decisions and demonstrate business and platform value., • Support platform extensibility for future use cases, including analytics enablement, AI/ML workflows, agent-driven consumption, and governance integrations. Cross-Functional Collaboration, • Translate business, governance, and platform requirements into automated, implementation-ready technical designs., • Collaborate with data engineering, cloud engineering, security, and governance teams to ensure alignment with enterprise standards., • Act as a technical bridge between platform teams, marketplace consumers, and external vendors. Engineering Excellence & Leadership, • Establish and promote best practices for solution design, automation, performance, security, observability, and reliability., • Provide technical guidance and mentorship to engineers across marketplace, platform, and integration initiatives., • Participate in architectural reviews, technical decision-making, and roadmap planning. Required Skills & Qualifications, • 6+ years of experience designing and delivering enterprise-grade solutions in distributed, cloud-based environments., • 3+ years of hands-on experience architecting and implementing solutions using Informatica platforms, including data integration, metadata management, data catalog, governance, data quality, and automation., • 3+ years of experience in cloud platforms (e.g., AWS, Azure, or equivalent), designing and integrating data and platform services in cloud-native or hybrid environments., • 3+ years of experience in automation and systems integration, including API-based integrations, workflow orchestration, and event-driven architectures., • Demonstrated ability to design solutions that span multiple systems and vendors, not confined to a single platform., • Experience taking solutions from concept and prototype through production in complex enterprise environments., • Strong problem-solving skills with the ability to operate effectively in ambiguous, evolving problem spaces., • Excellent communication skills, with experience explaining complex technical concepts to both technical and non-technical stakeholders. Preferred Qualifications, • Experience with data marketplaces, data products, or enterprise platform enablement initiatives., • Familiarity with governance, access control, metadata, lineage, data contracts, or policy-driven automation., • Experience integrating analytics platforms, semantic layers, or AI/ML workflows with data platforms., • Prior experience in a solutions engineer, platform architect, or technical lead role., • Strong interest in automation, developer enablement, and continuous platform improvement.

Job Title: DevOps Engineer - GitHub Actions Specialist Location: Newark, NJ (Hybrid) Duration: 9 Months As a DevOps professional, you will be supporting our mission of enabling developers to build applications: easier, faster, and safer. You will bring development experience, technical wisdom, and mentorship to the team. You and team are responsible for the delivery of DevOps solutions to solve business challenges. To understand business needs and organizational-wide impact, you will need to establish partnerships with teams and roles access the organization. *NOTE: For this role we are looking for a GitHub actions expert! This candidate must have committed to OSS projects on GitHub * Here is What You Can Expect on a Typical Day? • Developing quality, secure, testable, and scalable software, • Participate in Agile ceremonies to synchronize the team members, • Collaborating with the team when facing challenges or sharing discoveries, • Engage stakeholders in technical discussions and architectural design decisions, • Outreach to business stakeholders for feature feedback, • Ensure proper fit and implementation of 3rd party products, • Identify challenges, escalate concerns, and propose solutions The Skills & Expertise You Bring, • Bachelor of Computer Science or Engineering or experience in related fields?, • Broad knowledge of software languages, frameworks, and architecture paradigms, • Experience API design and development, • Project management capability to ensure ownership and successful delivery, • Collaboration with peers and teams across the company to leverage diverse ideas, experiences, and perspectives, • Thought leadership in DevOps & emerging industry trends, • Experience with Agile development practices and methodologies, • Ability to learn new skills and knowledge on an on-going basis through self-initiative and tackling challenges? Technical Proficiencies:, • Languages: Python, Type/JavaScript, Shell/Scripting, HCL, Groovy, • CI/CD Orchestration: GitHub Actions, Jenkins, CloudBees, • IaC/CasC: Terraform, CloudFormation, Ansible, • AWS: Lambda, DynamoDB, SQS, SNS, EventBridge, IAM, • Containers: EKS, Docker, ECS, ACA, • Observability: Splunk, Dynatrace, Cribl, OpenTelemetry Preferred Qualifications, • Financial/Insurance industry experience, • Large-scale enterprise DevOps experience, • Familiarity with test automation, • Familiarity with security testing (SAST, SCA, DAST, etc)

Job Description: Job title: Software Engineer Duration: 12 months (possibility of extension) Location: Hybrid (Newark, NJ) Summary • Build applications ensuring that the code follows latest coding practices and industry standards, using modern design patterns and architectural principles; remove technical impediments, • Develop high quality, well documented and efficient code adhering to all applicable Prudential standards, • Collaborate with product owners in understanding needs and defining feature stories, tech leads in defining technical design and other team members to understand the system end-to-end and deliver robust solutions that bring about business impact, • Write unit, integration tests and functional automation, researching problems discovered by quality assurance or product support, developing solutions to address the problems, • Bring a strong understanding of relevant and emerging technologies, provide input and coach team members and embed learning and innovation in the day-to-day, • Work on complex problems in which analysis of situations or data requires an evaluation of intangible variables., • Use programming languages including but not limited to Python, Java, or JavaScript and React, Springboot, frameworks The Skills & Expertise You Bring • Bachelor of Computer Science or Engineering or experience in related fields, • 6+ years of hands-on experience building enterprise-grade applications using modern Java and JavaScript ecosystems, • Experience with agile development methodologies and Test-Driven Development (TDD), • Knowledge of business concepts tools and processes that are needed for making sound decisions in the context of the company's business, • Ability to learn new skills and knowledge on an on-going basis through self-initiative and tackling challenges, • Excellent problem solving, communication and collaboration skills Advanced experience and/or expertise with several of the following: • Programming Languages: Python, Java, Java Script; Typescript, C#, working in distributed systems, object oriented programming, design patterns and design methodology; JAVA services using Spring, Maven, Microservices, multi-threading, Concurrency and parallel processing, • Frameworks: React, Springboot, Flask, Django, Node.js (Run time), • Data Store: NoSQL or Relational Data structures - PL/SQ, DB2, Oracle, Postgres, RedShift, • Data Streaming: SQS, Kinesis, AWS MSK, Event Bridge, • Application Programming Interfaces (API): Consumption & Development; implementing service oriented architecture (SOA) patterns; Web service technologies such as APIs, REST, JSON, SOAP, XML, JDBC, MySQL, • API Management & Integration : Kong, Apigee, • Unit, interface and end user testing concepts and tooling (functional & non-functional), • Automated testing, • Accessibility awareness, • Software security skills including secure coding, web application security and DevSecOps; Solid grasp of security concepts (authentication, authorization, encryption, digital signature, JWT), SSL, web service proxies, firewall, SAML 2.0, OpenID Connect, OAuth 2.0), • Dev Ops Tools & Practices: Branching techniques and usage of GitHub, Bitbucket or Subversion; DevOps, Jenkins, • Software Development Life Cycle (SDLC): Monitoring and logging techniques, • AWS Core Services across compute, storage, DB, IAM and analytics incl specific services listed above, • Preferred Qualifications:, • Strong experience with Domain Driven Development (DDD), • AWS cloud native solution development, • Architecture Patterns, • Design and critical Thinking, • Financial/Insurance industry experience is a must, not a plus, • Experience with agentic frameworks and AI driven development tools is a Must. [Claude Code, GitHub Copilot etc]

Role: Senior Software Engineer Duration: 6+ months (Temp to Perm Hire) Location: Newark, NJ - Hybrid (3 days onsite per week) About the Opportunity: Are you interested in building capabilities that enable the organization with innovation, speed, agility, scalability and efficiency? The Global Technology team takes great pride in our culture where digital transformation is built into our DNA! When you join our organization, you'll unlock an exciting and impactful career - all while growing your skills and advancing your profession at one of the world's leading financial services institutions. Your Team & Role: As a Senior Software Engineer on the Group Insurance team, you will partner with product owners, tech leads, designers, engineers and delivery professionals to improve and enhance our Onboarding Platform. You will code, test and debug new and existing applications as you implement capabilities to solve sophisticated business problems, deploy innovative products, services and experiences to delight our customers! In addition to applied experience, you will bring excellent problem solving, communication and teamwork skills, along with agile ways of working, strong business insight, an inclusive leadership attitude and a continuous learning focus to all that you do. What You Can Expect on a Typical Day: • Build applications ensuring that the code follows latest coding practices and industry standards, using modern design patterns and architectural principles; actively code against the roadmap, • Develop high quality, well documented and efficient code adhering to all applicable client's standards., • Collaborate with product owners in understanding needs and defining feature stories, tech leads in defining technical design and other team members to understand the system end-to-end and deliver robust solutions that bring about business impact., • Write unit, integration tests and functional automation; research problems discovered by quality assurance or product support, developing solutions to address the problems., • Bring an applied understanding of relevant and emerging technologies, identify opportunities to provide input to the team and coach others, and embed learning and innovation in the day-to-day., • Work on complex problems in which analysis of situations or data requires an in-depth evaluation of various factors., • Bachelor of Computer Science or Engineering or experience in related fields., • Leverage diverse ideas, experiences, thoughts and perspectives to the benefit of the organization, • Experience with agile development methodologies and Test-Driven Development (TDD), • Knowledge of business concepts, tools and processes needed for making sound decisions in the context of the company's business, • Ability to learn new skills and knowledge on an on-going basis through self-initiative and tackling challenges, • Programming Languages: Python, Java or JavaScript; distributed systems, object oriented programming, design patterns and design methodology; Java services using Spring CLI, Maven, Microservices, multi-threading, concurrency and parallel processing, • Frameworks: React, Spring Boot, Node.js (Full / MEAN / MERN stack), • Data Store: NoSQL or Relational Data structures; MongoDB; BPM tools, • Data Streaming: SQS, Kinesis, • APIs: Consumption & Development; implementing service oriented architecture (SOA) patterns; REST, JSON, SOAP, XML, JDBC, MySQL, • Testing: Unit, interface and end user testing concepts and tooling (functional & non-functional); automated testing, • Accessibility: Accessibility awareness and compliance, • Security: Secure coding, web application security and DevSecOps; authentication, authorization, encryption, digital signatures, JWT, SSL, web service proxies, firewalls, SAML 2.0, OpenID Connect, OAuth2.0, • DevOps Tools & Practices: Branching techniques and usage of GitHub, Bitbucket or Subversion; DevOps, Jenkins, • SDLC: Monitoring and logging techniques, • AWS Development, • Architecture Patterns, • Design Thinking, • Financial / Insurance industry knowledge is a plus, not a must

Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards. Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation. What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication. Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding. Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields. Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title: AWS Data Engineer Duration: 7 months (Possibility of extension) Location: Hybrid (Newark, NJ) Job Summary: We are seeking an experienced AWS Data Engineer to join our Data Engineering team. As a technical leader, you will be responsible for architecting, implementing, and managing scalable data solutions on AWS. You will provide technical guidance to a team of data engineers, collaborate with cross-functional partners, and ensure best practices in cloud data engineering. Key Responsibilities: • Lead the design, development, and optimization of large-scale, reliable, and secure data pipelines and data lake architecture on AWS., • Architect and implement end-to-end data solutions, including data ingestion, storage, transformation, and analytics using AWS services (Glue, Redshift, S3, Lambda, EMR, Kinesis, Athena, RDS, etc.)., • Mentor and guide a team of data engineers, conducting code reviews and fostering best practices in data engineering and cloud architecture., • Collaborate with data scientists, analysts, and business stakeholders to translate requirements into scalable and maintainable solutions., • Oversee migration of data from legacy systems to AWS-based data lakes and data warehouses., • Develop and enforce standards for data quality, security, and governance., • Drive the adoption of DevOps, CI/CD, and infrastructure-as-code practices within the data engineering team., • Ensure solutions are cost-effective, performant, and aligned with enterprise data strategy., • Stay current with advancements in AWS technologies and data engineering trends and evaluate new tools and frameworks for potential adoption., • Troubleshoot complex data issues and provide technical leadership in problem resolution. Required Qualifications:, • Bachelor's or Master's degree in Computer Science, Engineering, or a related field., • 7+ years of experience in data engineering, with at least 3 years in technical leadership or lead engineer role., • Extensive hands-on experience with AWS data services (Glue, Redshift, S3, Lambda, EMR/Spark, Kinesis, Athena, RDS, API Gateway, etc.)., • Proficient in programming languages such as Python and SQL; experience with Shell scripting and Scala is a plus., • Strong experience designing, implementing, and managing data lakes, data warehouses, and data ingestion pipelines on AWS., • Proven experience with ETL/ELT processes, data modeling, and big data frameworks., • Demonstrated ability to lead, mentor, and coach engineers in a collaborative team environment., • Experience with DevOps practices, CI/CD pipelines, and infrastructure-as-code tools (e.g., CloudFormation, Terraform)., • Excellent problem-solving, communication, and organizational skills. Preferred Qualifications:, • AWS Solutions Architect or AWS Data Engineer certification., • Experience with real-time streaming technologies., • Knowledge of data governance, compliance, and security best practices., • Familiarity with Lakehouse architecture and modern data platforms.

Posting Type Remote/Hybrid Job Overview As an Advanced Security Engineer focused on Endpoint Security, you will design, build, and operate security controls that protect Relativity's employee endpoints and the enterprise systems they access. You will help establish hardened, standardized, and measurable endpoint security foundations that reduce risk while preserving productivity, partnering closely with IT and Security teams to deliver securebydefault device experiences. This role blends handson software engineering with systemlevel security ownership in a modern cloud environment. Job Description and Requirements Role Responsibilities * Design, implement, andoperateendpoint security controls across laptops and mobile devices * Build automation and tooling to enforce secure configuration baselines and reduce manual effort * Partner with IT on device management, deployment, and lifecycle security * Reduce enterprise risk by hardening devices, limiting standing privilege, and improving visibility * Participate in incident response and endpointrelated investigations in partnership with Cyber teams * Continuously improve endpoint security posture using metrics, telemetry, and risk insights Minimum qualifications: * Bachelor's in Computer Science, Information Security, or equivalent experience. * 2+ years of commercial experience in software developmentand scripting(C#, Python,Javaor other general-purpose modern programming language) with a solid understanding of computer science fundamentals, including algorithms and data structures * Experience securing andoperatingmanaged endpoints at scale * Familiarity with modern device management and endpoint protection concepts * Ability to translate security policy into automated, enforceable controls * Comfort working across teams to deliver secure outcomes without friction * Experience with cloud technologies(preferably Azure),DevSecOpspractices, and automation tools (e.g., GitHub Actions). * Growth mindset and eagerness to learn across engineering and securitydomains. * Ability to take feedback and strive for continual improvement. Preferred qualifications: * Experience securing cloud-native applications / SaaS solutions and networks. * Familiarity with vulnerability scanning and threat protection. * Relevant certifications: * Microsoft Certified: Azure Security Engineer Associate (AZ-500). * Microsoft Certified: Identity and Access Administrator Associate (SC-300). * Knowledge of Zero Trustprinciplesand compliance standards (e.g., GDPR, HIPAA). * Exposure to other cloud platforms(AWS, GCP). Relativity is committed to competitive, fair, and equitable compensation practices. This position is eligible for total compensation which includes a competitive base salary, an annual performance bonus, and long-term incentives. The expected salary range for this role is between following values: $104,000 and $156,000 The final offered salary will be based on several factors, including but not limited to the candidate's depth of experience, skill set, qualifications, and internal pay equity. Hiring at the top end of the range would not be typical, to allow for future meaningful salary growth in this position. Required Skills: Endpoint Security, Network Security, Penetration Testing, Security Architecture Design, Security Automation, Security Information, Security Information and Event Management (SIEM), Security Operations, Threat Modeling, Vulnerability Management

Description Leidos is seeking an experienced Senior Network Delivery Architect for our Resilient Network Practice. POSITION SUMMARY: The successful candidate will be responsible for providing hands on technical expertise with Mission Drivers within the Network Practice of the Digital Modernization (DigMod) Sector. As a Network Practice Sales Engineer/Architect , you'll be a critical bridge between technical expertise and business development. Your role will focus on promoting Leidos Network solutions to federal clients, ensuring alignment with their needs and driving successful adoption of Leidos Mission Drivers. Duties may include developing innovative approaches and solutions, using non-quantitative tools and guidelines from experience. WORK LOCATION: We're looking for someone available to work onsite in Newark, NJ for a defined period, initially. The role offers some telework flexibility, but candidates must be willing and able to travel to other future customer sites and work onsite as needed. CLEARANCE REQUIREMENT: No initial clearance is required to start; however, you must be able to obtain and maintain a DoD Secret security clearance. (US Citizenship required). PRIMARY RESPONSIBILITIES: Technical Expertise: • Maintain a deep understanding of network technologies (e.g., IaC, SD-WAN, wireless, NFV)., • Maintain a deep understanding of Leidos Network Mission Drivers and be able to articulate technical benefits, features, and use cases to potential clients., • Stay informed about network trends, competitive landscape and emerging technologies to effectively position Leidos capabilities and offerings., • Lead strategic initiatives to enhance the Leidos offerings portfolio, leveraging your deep technical knowledge and industry insights. Client Engagement: • Be the Network Practice Area technical Sales Engineer/Architect that works with Leidos DigMod Sector CTO, Business Groups and Growth to identify customer requirements and propose tailored solutions and offerings., • Direct, conduct and participate in technical presentations, demonstrations and workshops for government customers., • Work with DigMod CTO organization to leverage and create sandbox, demonstration environments for hosting Network Practice repeatable offerings., • Develop and maintain high-level relationships with key stakeholders and decision-makers to drive strategic opportunities and long-term partnerships., • Provide consulting and thought leadership to influence client decision-making and drive project success. Solution Architecture: • Partner with Leidos capture teams, solutions architects, and engineers to design secure, resilient, and scalable networking solutions that meet customer requirements, including MPLS-based transport, carrier-neutral facility interconnects, SD-WAN overlay architectures, and wireless access technologies, tailoring repeatable offerings accordingly., • Architect enterprise and mission-scale network solutions leveraging multi-cloud connectivity patterns, including hybrid and cross-cloud networking, secure cloud on-ramps, and integration with carrier-neutral data center ecosystems to support federal mission needs., • Design and oversee implementation of advanced segmentation strategies, including micro-segmentation and policy-based network controls, to enhance security posture, zero trust alignment, and workload isolation across on-premises, cloud, and edge environments., • Develop and implement innovative solutions to address complex technical challenges across multiple sectors, applying deep expertise in SD-WAN overlays, wireless technologies, and multi-transport networking using creative problem-solving and advanced technical judgment., • Architect and govern the delivery of enterprise-scale network solutions, ensuring alignment with organizational strategy, client mission objectives, and evolving technology standards., • Champion network architecture best practices and drive continuous improvement of Leidos Network Practice offerings based on market trends, emerging technologies, and client feedback., • Serve as the lead technical contributor for proposal and RFx efforts, with primary responsibility for solution architecture, technical narratives, and pricing inputs related to network transport, cloud connectivity, and security segmentation strategies., • Deploy, maintain, and demonstrate Network Practice Repeatable Offerings, including SD-WAN, multi-cloud connectivity, wireless, and micro-segmentation capabilities, to internal business areas and current and prospective customers. Collaboration: • Collaborate with practice area team members, client stakeholders, and external partners, including sub-contractors and suppliers, to ensure effective communication and project alignment., • Influence practice area and sector leaders on solution design and process improvements, advocating for strategic approaches and best practices., • Lead cross-functional teams to drive alignment and ensure the successful delivery of complex, multi-dimensional projects. BASIC QUALIFICATIONS: • Master's degree with minimum of 15+ years in network architecture or engineering roles, with a robust background in designing, implementing, and optimizing solutions in network environments; additional years of experience may be substituted in lieu of degree., • Extensive experience in NMS, multi-transport, and infrastructure-as-code concepts., • Demonstrated expertise in designing and deploying scalable infrastructure incorporating cloud environments using both established and cutting-edge technologies., • Proven track record of resolving complex technical challenges in Network architectures., • Strong leadership skills with a successful track record of leading teams in the implementation of Network solutions, fostering collaboration and innovation., • Ability to effectively manage projects, prioritize tasks, and meet deadlines in dynamic Network environments. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $139,100.00 - $251,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Experience with embedded system software development. Job Title: Senior Software Engineer. We are seeking a Senior Software Engineer to design and develop advanced cyber capabilities that strengthen national security.

Quality Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: My client is a leading manufacturing company who is growing! They are looking to add a Quality Engineer to their team who is responsible for supporting aerospace quality assurance activities for manufacturing, repair, inspection, test, supplier quality, customer quality, and regulatory compliance. Why join us? Compensation Up To $120,000 Job Details Essential functions and Responsibilities Quality System, Regulatory, and Customer Compliance Support and assure compliance with applicable aerospace regulatory and quality system requirements, including AS9100, ISO 9001, FAA Part 21 production approval requirements, FAA Part 145 repair station requirements, and applicable customer-specific quality requirements. Review products and documentation in accordance with applicable customer, regulatory, military, industry, and internal quality requirements. Contract, Technical Data, and Quality Planning Review Review customer purchase orders, drawings, specifications, quality clauses, repair instructions, ATPs, OMMs/CMMs, and flow-down requirements to ensure quality planning, inspection, documentation, and release activities are properly defined before work is performed. Work closely with Product Engineering, Manufacturing Engineering, Manufacturing, Test, and Inspection personnel to resolve quality-related issues involving design, methods, tooling, procedures, costs, and product conformance. Establish, revise, and maintain written procedures, instructions, and quality documentation related to product quality assurance activities. Nonconforming Material, MRB, and Corrective Action Participate in Material Review Board and nonconforming material activities, including defect investigation, containment, disposition support, customer notification support, and verification of corrective actions. Perform root cause analysis using tools such as 8D, 5 Whys, fishbone/Ishikawa, and other structured problem-solving methods to identify appropriate corrective and preventive actions. Inspection, Test, FAI, and Product Release Oversee critical testing and inspection activities; coordinate inspections with customers, source inspectors, government representatives, and internal inspection personnel as required. Analyze and document inspection and test results to support product acceptance, customer release, and corrective action activities. Review raw material certifications and approve raw material for production release when required. Prepare, review, and approve product data packages, including inspection records, test reports, material certifications, special process certifications, traceability records, and customer-required documentation. Customer, Supplier, and Delegated Quality Activities Communicate directly with customers, suppliers, auditors, inspectors, and internal stakeholders in a clear, professional, and technically accurate manner. Interface directly with customers to support quality planning, customer concerns, source inspection, audit support, product release, and issue resolution. Education and Skills Requirements Four-year technical degree or equivalent experience required; Mechanical Engineering degree preferred. Four to eight years of experience in Quality Assurance, Quality Engineering, Manufacturing Engineering, or equivalent experience in aerospace, defense, or another highly regulated manufacturing environment. Experience working in a manufacturing environment with frequent shop floor interaction, including direct support of production, inspection, test, engineering, and customer-facing quality activities. Working knowledge of AS9100 and ISO 9001 requirements required. Experience preparing, reviewing, or approving AS9102 First Article Inspection Reports required. Familiarity with FAA 8130-3 documentation, repair station documentation, FAA Part 21 production approval documentation, or FAA Part 145 repair station documentation preferred. Familiarity with APQP/PPAP, AS9145, AS13100, key characteristics, process capability, and MSA preferred. Experience with root cause analysis and corrective action methods, including 8D, 5 Whys, fishbone/Ishikawa, containment, corrective action, preventive action, and effectiveness verification. Experience reviewing aerospace technical data, including drawings, specifications, purchase orders, ATPs, OMMs/CMMs, material certifications, special process certifications, and customer quality clauses. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Manufacturing Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: My client is a leading manufacturing company and is growing! They are looking to add a Manufacturing Engineer who will participate in identifying waste, defining value streams, productivity optimization, Kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools. Why join us? Compensation Up To $135,000 Other Benefits Include Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life – Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance Job Details Responsibilities: Analyze blueprints, specifications, model files (CAD) and other documentation to prepare accurate simulations and supportive data sets / process models for manufacturing projects, particularly those involving insert injection molding of thermoplastics, precision machined components, and/or complex sub-assemblies for the MedTech industry Integrate fully as a partner to Business Development and Solutions Architecture Teams, with primary objective to drive new business opportunities, sales expansion – and further increase competitive advantage through systems engineering and application of Industry 4.0 practices Collaborate with engineering, production, procurement and accounting teams to gather actual cost data, historical summaries of previously quoted business (including tooling costs/lead-times, engineering resource utilization, and achieved manufacturing standards relative to those estimated) with the purpose of refining new business and existing business quotations to drive growth Partner with IT / ERP Teams (Business Analysts) and Manufacturing expand the use of existing systems for real-time / actual data collection, and adoption of new systems for manufacturing data acquisition and process optimization modeling Utilize software tools and engineering knowledge to develop detailed cost models for materials, labor, equipment, and other resources – beyond the print / model provided (look for optimization opportunities) Identify the best possible manufacturing processes and evaluate based on wholistic process flow, all process steps equipment / manufacturing processes for optimized efficiency and cost-effectiveness Generate internal business cases, including projected ROI for CapEx spending justification in collaboration with Accounting Partners; as well as “preferred site” status for manufacturing based on costs, labor availability, and capacity utilization Utilize SolidWorks, CAD/CAM software packages for product DFM, and conceptualization of proposals Utilize and/or identify and Deploy software tools to facilitate data acquisition and analysis, such as Minitab, Sage, Flexsim, Paperless parts or similar Requirements: Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering) Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, and related role in the manufacturing industry, with specific experience utilizing industry 4.0+ best practices and/or Lea Experience working for a Contract Manufacturer or OEM Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment Knowledge, Skills and Abilities Required: Ability to identify the best possible manufacturing processes Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes Experience in product level design for manufacture (DFM) Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Our client is looking for a Molding Tooling Engineer for a Direct Hire Position in Fairfield, NJ. Salary: $120-140K Requirements: • BSME or Plastics related degree required., • At least 5 years’ experience with plastic process development of high tolerance plastic parts., • Extensive knowledge of engineering grade plastics as it relates to plastic processing., • Advanced knowledge of Mold tooling required, • Knowledge of Design of Experiments (DOE) as it relates to plastic processing. Benefits: Health, Dental and Vision Insurance, 401K and match, Pet insurance, etc... Company DescriptionPrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? RELOCATION ASSISTANCE OFFERED We understand that great talent can come from anywhere. That's why we offer: • Up to 60 days of temporary housing, • Reimbursement for moving and travel expenses, • Support with general relocation needs, • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are seeking a Senior Civil Engineer (PE) to serve as a technical lead and project manager for civil/site projects including site design, grading, utilities, and stormwater management. This role is responsible for leading design from concept through permitting and construction, managing scope/budget/schedule, and coordinating directly with clients and agencies on a mix of public and private work. The ideal candidate brings strong technical judgment, a collaborative leadership style, and experience navigating complex review environments; NYC/NYS or NJ agency experience is strongly preferred. The salary range for this role is $115-$160k; depending on experience. Key Responsibilities • Technical Leadership (Site/Civil): Lead the civil/site design on multiple projects for grading, drainage, stormwater management, and utility systems (storm, sanitary, domestic water, and related appurtenances), ensuring constructability and code/criteria compliance., • Design Deliverables & QA/QC: Direct and review the development of construction documents (plans, profiles, details, and quantities), engineering calculations, and technical narratives/reports. Provide disciplined QA/QC and seal/sign deliverables as appropriate., • Permitting & Agency Coordination: Manage permitting strategy and submittals (e.g., stormwater/SWPPP, site connection/utility approvals, erosion & sediment control) and lead responses to agency comments. Coordinate with applicable agencies and utility providers; NYC agency coordination is highly valued., • Project Management: Manage scope, schedule, budget, and risk for assigned projects. Prepare and track work plans, staffing, and deliverable milestones; support contract change management and internal reporting., • Client-Facing & Team Leadership: Serve as a day-to-day client contact, lead meetings, and communicate technical recommendations clearly. Mentor and direct junior staff and coordinate with other disciplines to deliver integrated solutions., • Business Development Support: Support proposals and interviews by developing technical approaches, scopes of work, assumptions, and fee estimates; help identify follow-on opportunities and initiate new opportunities through strong client service.Minimum Requirements, • Education: Bachelor’s Degree in Civil Engineering from an ABET-accredited engineering program., • Licensure: Active Professional Engineer (PE) license required. Ability and willingness to obtain additional state licensure as needed., • Experience: Typically 8+ years of progressive civil/site engineering experience with demonstrated responsibility leading design and producing permit and construction documents (site design, grading, utilities, stormwater) for public and/or private projects., • Leadership: Proven ability to lead technical teams, manage multiple projects, and communicate effectively with clients, agencies, and internal stakeholders., • Technical Depth: Experience with green infrastructure/stormwater BMPs, hydrologic/hydraulic analysis, and utility conflict resolution in dense urban environments.Preferred Qualifications, • NYC Agency Experience: Strong familiarity with NYC public work and approval pathways (e.g., NYCDEP site connections/SWPPP, NYCDOT roadway/ADA interfaces, NYC Parks/EDC/NYCHA coordination) and responding to complex review comments., • NJ Agency Experience: Familiarity with NJ agencies and approval processes (e.g., NJDEP, SCDs, local municipalities) and preparing/responding to review comments., • Software Proficiency: Proficiency with AutoCAD Civil 3D; MicroStation and stormwater/hydraulics tools such as HydroCAD, Hydraflow/Storm Sewers, HEC-HMS, and/or HEC-RAS are a plus., • Construction-Phase Support: Experience supporting construction administration (RFIs/submittals, field coordination, inspections) and partnering with contractors on design-build or fast-track delivery., • Licensure: Additional active PE licenses (multi-state) and/or ability to quickly obtain comity licensure. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description T&M Associates is looking for a Supervising Municipal Engineer to join our Municipal Department in Toms River, NJ. In this leadership role, you will oversee a team of engineers while managing a portfolio of capital improvement projects across various municipal sectors. This hybrid position offers a flexible work environment, allowing for a mix of remote work and in-office collaboration. The ideal candidate will have extensive experience in municipal engineering, strong leadership skills, and a proven ability to manage both technical and client-facing aspects of projects. Key Responsibilities: • Team Leadership & Supervision - Lead, mentor, and supervise a team of municipal engineers, providing guidance, technical support, and professional development opportunities., • Project Oversight - Oversee the preparation of engineering documents for municipal projects, including plans, specifications, and cost estimates for roadway, drainage, sewer, water, parks, and athletic fields improvements., • Project Management - Manage multiple high-priority projects, ensuring they are completed on time, within budget, and meet quality standards. Act as the primary point of contact for clients, contractors, and regulatory agencies., • Field Inspections & Assessments - Conduct or oversee field inspections of infrastructure projects to ensure compliance with design standards and local regulations., • Review & Approvals - Review municipal site plans, zoning applications, and subdivisions, preparing detailed technical reports and recommendations for Planning & Zoning Boards., • B.S in Civil Engineering or related field., • 10+ years of experience in Civil Engineering, including project management for design and construction projects., • Must have Professional Engineer (PE) license. Professional Planner (PP) license a plus., • Familiarity with AutoCAD Civil 3D., • Experience in reviewing applications for Land Use Boards with availability for Municipal (Land Use Board, Council and/or Committee) night meetings., • Excellent written and verbal communication skills., • Ability to organize and manage multiple projects. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Be Part Of A High-Performing Technology Team Join a forward-thinking Commercial Banking technology organization dedicated to building modern, scalable integration platforms that power mission-critical financial systems. This team operates at the center of enterprise application connectivity—designing and delivering high-performance middleware and API solutions that enable seamless communication across global systems and stakeholders. The environment is collaborative, Agile-driven, and innovation-focused, with engineers working closely alongside Product Owners, QA teams, architects, and international business partners. The team values clean architecture, engineering best practices, and thoughtful modernization, while maintaining the stability and rigor required in a regulated financial environment. This role offers the opportunity to contribute to enterprise-scale API platforms supporting global banking operations, including cross-border collaboration with Japanese and English-speaking stakeholders. What’s In Store For You • Opportunity to work on large-scale, customer-facing API platforms within Commercial Banking, • Exposure to modern cloud environments and DevOps practices, • Collaborative Agile team culture with strong engineering standards, • Long-term, high-impact initiatives focused on scalability and modernization, • Design, develop, and maintain scalable middleware and RESTful API applications using Java and Kotlin, • Partner with global stakeholders (Japanese and English-speaking) to translate business requirements into technical solutions, • Contribute to application architecture and apply design patterns to ensure scalability and performance, • Write high-quality, maintainable code with unit testing and automation, • Participate in code reviews and promote engineering best practices, • Support CI/CD pipelines and deployment processes in cloud environments (AWS, Azure, or GCP), • Collaborate within Agile sprint cycles to prioritize and deliver features, • 8–10+ years of application development experience, with strong expertise in Java (Kotlin experience is a plus), • Demonstrated experience designing and supporting customer-facing RESTful APIs, • Strong understanding of JSON, web services technologies, and data structures, • Experience applying design patterns in scalable, enterprise-grade applications, • Hands-on experience with Git, Jira, CI/CD tools, and DevOps practices, • At least 1 year of experience working with public cloud platforms (AWS, Azure, or Google Cloud), • Proven ability to deploy applications to production and support the full application lifecycle, • Experience working in Agile development environments, • Professional-level bilingual fluency in Japanese and English (written and verbal), with ability to collaborate across global teams, • Bachelor’s degree in Computer Science or equivalent experience, • Financial services or banking industry experience preferred

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do: Our Data Center Facilities team is at the forefront of the shift to the Intelligence Age, re-engineering the physical layer to support the unprecedented power and thermal demands of next-generation AI hardware, such as NVIDIA's H100 and Blackwell architectures. We are a high-impact, cross-functional group of technical experts dedicated to solving complex infrastructure challenges, from transitioning suites to 80kW+ per-rack densities to implementing advanced liquid-cooling methodologies. In this role, you will collaborate with MEP consultants and operational stakeholders to manage multi-million-dollar retrofits, ensuring our physical infrastructure remains a catalyst—not a bottleneck—for global AI ambitions. We thrive on technical precision and mission-critical reliability, building the foundation for the next era of computing. About the role: • As our Staff, Data Center Augmentation Engineer, you will be the bridge between our current infrastructure and the future of AI. You will lead the engineering efforts to upgrade, expand, and optimize our data center footprint to support high-density AI workloads. This isn't just about keeping the lights on—it's about re-engineering the power and cooling envelopes to accommodate the next generation of compute.Who You Are:, • Expansion Coordination: Lead the technical planning and execution of data center augmentations and retrofits, where we are adding load into existing spaces., • High-Density Design: Work with the design and capacity teams to complete the design and planning for power expansions. and oversee the implementation of power and cooling solutions specifically for AI hardware., • Infrastructure Strategy: Evaluate existing electrical and mechanical capacities to determine the feasibility of 50kW–100kW+ rack densities., • Vendor & Project Management: Coordinate with MEP (Mechanical, Electrical, and Plumbing) consultants, general contractors, and hardware vendors to ensure projects are delivered on time and within "mission-critical" tolerances., • Risk Mitigation: Conduct Method of Procedure (MOP) and Standard Operating Procedure (SOP) reviews to ensure augmentations do not disrupt existing live operations., • Education: Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or a related technical field., • Experience: 10+ years in Mission Critical Operations (Data Centers, Hospitals, or Semiconductor Plants)., • Technical Knowledge: Deep understanding of UPS systems, backup generators, and switchgear., • Experience with advanced cooling methodologies (CRAH, Chilled Water, Liquid Cooling)., • Familiarity with Data Center Infrastructure Management (DCIM) tools., • Project Leadership: Proven track record of managing multi-million dollar infrastructure build-outs or retrofits., • Ability to travel approximately 30% to data center locations globally.Preferred: (if applicable), • Communication: The ability to effectively convey complex Data Center power and cooling requirements to diverse operational stakeholders., • AI Hardware Familiarity: Demonstrated understanding of the spatial, power, and thermal management requirements for high-density AI accelerators (e.g., NVIDIA H100s/B200s or comparable architectures)., • You love to solve complex "mission-critical" puzzles, like retrofitting live infrastructure to meet the massive power and cooling demands of the AI era without disrupting operations., • You're curious about the future of hardware, specifically how emerging technologies like liquid cooling and high-density rack architectures (50kW–100kW+) will redefine data center design., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $177,000 to $237,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description About US Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. For over 75 years with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer on our growing team in either our Newark, NJ or our Philadelphia, PA office. What You will Achieve We are looking for an Electrical Engineer with 5+ years of experience in electrical consulting Engineering field to join Vanderweil as an Electrical Engineer. You will be involved in: • Work with Sr. Engineers and Project Managers to understand project goals and requirements, • Participate in meetings / discussions with the team members, including the owner, project architect, and other internal and external project disciplines., • Part of project team in designing the building infrastructure, including medium Voltage and Low Voltage electrical service, main electrical distribution equipment, building distribution equipment., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Perform electrical load calculations and electrical engineering studies., • Use Revit to model electrical systems is a plus., • 6+ years of related experience, • FE and or PE preferred, • Bachelor’s degree in Engineering, • Revit knowledge is a plus, • Understanding of the NEC, IBC and IECC. We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The compensation that we expect to pay for this position is commensurate with years of experience, project portfolio, geographic location, professional licensure and education and is expected to range in the $95,000 to $140,000 range.

Job Description T&M Associates is seeking a highly motivated and experienced Municipal Engineer to join our growing Community and Land Development Market in New Jersey. This is an exciting opportunity to work on impactful municipal projects while enjoying a flexible hybrid work arrangement that supports work-life balance. As a Municipal Engineer at T&M, you will play a key role in designing, managing, and delivering capital improvement projects for a diverse range of municipal clients. If you thrive in a collaborative environment and have a passion for improving communities, we want to hear from you! Key Responsibilities • Prepare engineering documents for advertisement and construction, including plans, specifications, and cost estimates for capital improvement projects (e.g., roadways, drainage, sewer, water systems, parks, and athletic fields)., • Oversee multiple design projects simultaneously, independently manage smaller projects, and coordinate with team members to ensure timely delivery., • Conduct site inspections and assessments of municipal infrastructure to verify compliance with design standards and regulatory requirements., • Review Planning & Zoning Board site plans and subdivisions; prepare detailed reports and recommendations., • B.S in Civil Engineering or related field. 5+ years of experience in Municipal Engineering or related field. EIT certification required, PE license preferred., • Fluency with AutoCAD and Civil 3D is required., • Knowledge of roadway design elements, standards, and constructability methods., • Proficiency in Municipal Land Use Law (MLUL) and Public Contracts Law. Excellent written and verbal communication skills. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Thirty Madison is now part of Remedy! You can read more about the acquisition here. We are excited to join forces and continue to revolutionize healthcare accessibility! As a Senior Software Engineer, you will be working alongside a team of dedicated engineers building the future of Remedy Meds. You will work cross-functionally with Product and Design teams and other internal and external stakeholders. Comp | Perks | Benefits • The base pay range for this position is $152,000 – $209,000 per year*, • Medical, Dental, and Vision plan options What You Get to Do Every Day • Lead the development of large features and champion quarterly projects that span multiple teams and problem sets, • Increase quality of Remedy Meds' code base by writing clean, maintainable, and well-documented code, • Enforce best practices for code reviews as well as quality standards across your team, • Design and iterate on complex designs and system improvements to enhance robustness, reusability, and security within our code base, • Be a trusted leader within on-call rotation and push key items for post-mortems in a timely manner, • Handle vaguely scoped projects and help guide other engineers through the process for a successful delivery, • Mentor and guide less senior engineers through complex problems as well as helping navigate different stakeholders, • Deep domain knowledge of the code base, design, architecture, and business goals of engineering related to business outcomes and goals for the company, • Ability to write clean, concise code while helping to improve our existing code base and documentation, • Strong acumen for finding problems and acting on them independently in a constantly evolving environment, • Strong desire to improve our engineering culture, help new hires, and mentor other engineers to create a positive team atmosphere, • Willingness to work through ambiguity and help others around you navigate the same challenges, • Strong communication skills within your team as well as with stakeholders, • Ability to seek and act on feedback from peers and leaders, • Willingness to collaborate effectively within your team and with internal and external stakeholders to achieve a common goal This role is based out of our Summit, NJ office. Candidates must be available to work in-office 4 days per week. U.S. Applicants Only Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At Thirty Madison we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions. Contact us at to request accommodation. *Please be aware that there are fraudulent entities who are falsely claiming to be or represent Remedy in order to solicit sensitive personal information or payment. Remedy is not in any way associated with these entities or practices. The safety and integrity of those seeking employment with us is of the utmost importance and we actively work with our legal and security teams to prevent future incidents. Remedy will never ask for sensitive information or payment when engaging with job seekers. The entities use many methods to perpetuate these scams, including but not limited to: participating in a text-only interview, using Thirty Madison's trademarks on their correspondence, or providing you with a seemingly legitimate offer letter. If you suspect you are a victim of this scamming, we encourage you to cease further contact and report the crime to The Federal Trade Commission.

Job Description Tiger Analytics is seeking a highly skilled Senior AI Engineer to join our dynamic team. In this role, you will design, develop, and implement cutting-edge AI solutions that drive business value for our clients. You will leverage advanced machine learning techniques, frameworks, and large datasets to create innovative products and solutions. As a Senior AI Engineer, you will work closely with cross-functional teams to identify project requirements, define success metrics, and maintain high-quality standards. Your expertise in AI will play a critical role in shaping our product offerings and ensuring the successful deployment of AI models in production. The successful candidate will have a solid background in artificial intelligence, experience with various ML frameworks, and a passion for solving complex business problems. Requirements Key Responsibilities: • Design and implement AI algorithms and models to solve real-world problems., • Collaborate with data scientists, data engineers, and business analysts to understand project requirements and propose relevant AI solutions., • Monitor and analyze the performance of AI models in production and iterate on them to improve outcomes., • Develop technical documentation as well as customer-facing documentation and presentations., • Master's or PhD in Computer Science, Machine Learning, Artificial Intelligence, or a related field., • 5+ years of experience in AI/ML development with demonstrated success in deploying machine learning models to production., • Proficiency in programming languages such as Python and familiarity with libraries such as TensorFlow, PyTorch, and Scikit-learn., • Experience with cloud-based AI services such as AWS, Google Cloud, or Azure., • Strong analytical and problem-solving skills, with a proven ability to interpret business requirements into technical solutions., • Experience with natural language processing (NLP) or computer vision applications., • Knowledge of MLOps principles and tools. This position offers an excellent opportunity for significant career development in a fast-growing and challenging entrepreneurial environment with a high degree of individual responsibility. #LI-remote

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at the Role: CoreWeave is seeking a passionate and innovative Software Engineer of Network Services to lead the architecture, scaling, and operations of our network services. You'll be tackling the complex challenges of building and operating world-class network services for the most demanding AI workloads on the planet. You will be focusing on achieving the highest levels of service quality, scalability and performance. You will also build comprehensive monitoring and alerting into our network services. You will work closely with your team to execute our network service roadmap, drive innovation, and ensure the reliability, security, and scalability of the CoreWeave Cloud Platform. Key Responsibilities • Develop, and maintain the network services infrastructure for our GPU cloud services, including networking cloud services, host networking, smart NICs, and overlay/underlay networks., • Collaborate with cross-functional teams, including DevOps, System Administrators, and Cloud Services teams, to ensure seamless integration of network datapath solutions., • Optimize host network performance, latency, and throughput to meet the demanding requirements of GPU-based workloads., • Implement and maintain network security protocols and best practices to protect customer data and infrastructure., • Participate in an on-call rotation, troubleshoot and resolve network-related issues, and provide timely support to the operations team., • Stay up-to-date with the latest networking technologies, industry trends, and best practices to continually improve our networking infrastructure., • Participate in code reviews, design discussions, and architecture decisions to ensure high-quality software development practices.Qualifications, • Bachelor's or Master's degree in Computer Science, Computer Engineering, or a related field., • Experience (2+ years) as a Software Engineer, with a focus on networking and cloud infrastructure., • Expertise in network protocols, routing, and security (TCP/IP, BGP, kernel networking, etc.)., • Proficiency in programming languages such as Golang, Python, or C++., • Familiarity with software-defined networking (SDN) and network virtualization technologies., • Experience building and deploying k8s networking and infrastructure, CNIs., • Experience with k8s operators and controllers is a plus., • Excellent problem-solving skills and a proactive attitude towards troubleshooting and issue resolution., • Strong communication skills and the ability to collaborate effectively with cross-functional teams. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionDescription: Position: Senior Structural Engineer (Building Design) Job Locations - Philadelphia, PA OR Newark, NJ OR Mount Laurel, NJ OR Manhattan, NY KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Technical Responsibilities: • Manage multiple building design projects concurrently, including project planning, scheduling, budgeting, and resource allocation, to ensure timely and successful project delivery within scope and budget constraints., • Utilize advanced structural analysis techniques and software tools to perform complex analyses, optimize designs, and ensure structural integrity, efficiency, and safety., • Serve as the primary point of contact for clients, consulting with them to understand project requirements, goals, and constraints, and providing expert technical advice, presentations, and solutions to address their needs., • Ensure compliance with relevant industry codes, standards, and regulations governing building design and construction, including Building Design Specifications, and local building codes., • Conduct thorough reviews of design calculations, drawings, and specifications prepared by the team to verify accuracy, consistency, and adherence to best practices and project requirements., • Collaborate with construction teams and contractors during the construction phase to address design-related issues, provide clarifications, and ensure that the construction meets design intent and performance expectations., • Identify potential risks and challenges associated with design projects, develop mitigation strategies, and proactively address issues to minimize project delays and cost overruns., • Stay abreast of emerging trends, technologies, and advancements in building engineering, structural analysis, and design optimization through professional development, training, and participation in industry conferences and forums., • Drive innovation in design by integrating cutting-edge technologies, materials, and construction methods to enhance performance, sustainability, and cost-effectiveness., • A bachelor’s or master’s degree from an accredited college/university in Civil Engineering with a focus in structural engineering., • 5- 10+ years’ experience in structural design with NY and NJ PE or the ability to get in within 6 months., • Proficiency in structural analysis software (e.g., SAP2000, MIDAS Civil, LARSA) and computer-aided design (CAD) tools (e.g., AutoCAD, MicroStation)., • Knowledgeable with Risa-3D and STAADPro analysis software., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and interact confidently with clients and stakeholders., • Proven track record of delivering high-quality building designs on time and within budget, with a focus on innovation, sustainability, and client satisfaction. Professional Development: • Actively participates in professional development and training and licensing. Physical Requirements: • Ability to sit at a desk for extended periods (often 6–8 hours a day)., • Maintaining posture while working at a computer., • Short periods of standing or walking within the office (to printers, meeting rooms, etc.). General Qualities: • Has excellent communication and writing skills., • Has excellent Microsoft Word and Excel. Ability to navigate through company internet-based systems., • Proactive self-starter capable of setting a positive example for the staff. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionJob Title: Bridge Engineer / Construction InspectorLocation: Various project sites (primarily New York City, with potential assignments nationwide) Position Overview We are seeking a motivated and detail-oriented Bridge Engineer / Construction Inspector to support bridge inspection and construction projects. This role involves field inspection, documentation, and coordination with engineering teams to ensure compliance with project specifications, safety standards, and regulatory requirements. The ideal candidate will have hands-on inspection experience, relevant certifications, and the ability to work in physically demanding and dynamic environments. Opportunities to contribute to engineering calculations and design work are available for qualified candidates. Key Responsibilities • Perform bridge and structural inspections in accordance with NYC and applicable regulatory standards, • Document field observations, prepare inspection reports, and maintain accurate project records, • Ensure construction work complies with plans, specifications, and safety regulations, • Coordinate with engineers, contractors, and project managers, • Monitor construction activities, materials, and workmanship, • Assist with engineering calculations, analysis, or design tasks (as applicable), • Travel to and work on project sites across the country, potentially for extended durations Required Qualifications, • Minimum 2 years of experience in construction inspection, preferably bridge or structural inspection, • ACI Certification meeting requirements for bridge inspection in New York City, • Strong understanding of construction practices, materials, and safety standards, • Ability to read and interpret engineering drawings and specifications, • Willingness to travel and work flexible hours, including nights or weekends as needed, • Ability to work in physically demanding conditions, including standing/walking for extended periods Preferred Qualifications, • ICC certifications (highly desirable), • Degree in Civil Engineering or a related field from an accredited university, • Experience with bridge inspection programs (e.g., NBIS), • Familiarity with inspection software and reporting tools, • Ability to assist with engineering design, calculations, or analysis, • OSHA certification (e.g., OSHA 10 or OSHA 30) Physical & Work Requirements, • Ability to remain active and on your feet for a full shift, • Comfortable working outdoors in varying weather conditions, • Ability to access elevated or confined areas (bridges, scaffolding, etc.), • Must be adaptable to changing project locations and schedules Additional Skills, • Strong attention to detail and organizational skills, • Effective written and verbal communication, • Team-oriented with the ability to work independently when needed, • Problem-solving mindset and adaptability in field environments

Job DescriptionJob Title: Senior Electrical Design Engineer (Switchboards / UL891) – Relocation Available Job Location: Kearny, New Jersey (NJ) In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: * Salary: USD $120,000 – $140,000 * Comprehensive benefits package * Paid time off + 10 company holidays * Tuition reimbursement program * Strong 401(k) employer contribution * Long-term growth and leadership opportunities * Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in advanced electrical infrastructure solutions. The company supports large-scale projects across industries such as energy, telecommunications, and industrial systems, with a strong reputation for quality, innovation, and technical excellence. Role Overview: Our client is seeking a Senior Electrical Design Engineer to lead the design of low voltage switchboards and panelboards. This role is ideal for someone with strong technical expertise who also enjoys mentoring junior team members and contributing to complex, high-impact engineering projects. Key Responsibilities: * Design low voltage switchboards and panelboards in compliance with industry standards * Develop detailed 3D sheet metal components and large-scale assemblies (150+ BOM items) * Create wiring diagrams including PLCs, relays, breakers, and control components * Produce and interpret technical drawings including one-line diagrams, layouts, and front views * Collaborate with manufacturing, engineering teams, and external vendors to ensure design accuracy * Support the full design lifecycle, ensuring adherence to internal standards and processes * Mentor and guide junior engineers as needed Qualifications: Required: * Bachelor’s degree in Electrical or Mechanical Engineering (or related field) * 4–8 years of experience in switchboard or panelboard design (UL891 or equivalent environment) * Strong proficiency in 2D and 3D CAD software (Autodesk preferred) * Solid understanding of electrical systems and components * Excellent communication skills and ability to work cross-functionally Preferred: * Experience with UL891, UL67, UL508A, or UL1558 standards * Familiarity with the National Electrical Code (NEC) * Experience sizing conductors and overcurrent protection devices (OCPDs) * Knowledge of control circuits and electrical logic systems

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success. Education • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR vNQ6EEkP4a