Document review jobs in Newburgh, New YorkCreate job alerts

Job DescriptionDescription: Duties and Activities Performed: · Maintain the following metering and BMS includes approximately 141 electric meters, 85 gas meters, 89 water meters and 10 steam meters, 13 ethernet switches, 58 cellular routers, 31 media converters, 70 JACEs and 3 Microsoft servers · Maintain meter data integrity and network/device stability effectively manage the individual settings, configuration and backups of the Shark electric meters and their connections to the gas, water and steams meters using the MODBUS protocol · Maintain, document and perform firmware updates for the Shark meters · Maintain and handle service help tickets for all the meters. This requires in depth knowledge of the troubleshooting protocol for the Shark meters, MODBUS and pulse technology. · Maintain ethernet switches, routers and/or building control devices. Administrative level access and knowledge is needed to manage these devices. · Maintain each shark meter, switch, etc. has a network presence which must be documented and assessed annually with actual vulnerability analysis software as this system has an ATO (Authority to Operate). · Maintain coordination with ISEC group with all the configuration and vulnerability analysis for the networks for which expertise in cybersecurity and knowledge of the Risk Management Framework (RMF) is a requirement. · Provide location specific energy data to engineers, often with large data sets, which are labeled, validated and summarized into a usable format so that engineers do not have to figure out how to present the data. This requires expert level analysis using advanced excel formulas, MS Power Bi and a solid understanding of data formats and how to convert data between them. · Provide quarterly data reports to AWERS and others (water usage for south post) which requires knowledge of the physical meter locations and how to validate the data from the meters. · Provide monthly meter reading data to enable BOID to invoice for the usage which is not difficult but can be time consuming. · Provide monitoring for (Meter Data Management System) MDMS system · Provide integrated energy data into the building management system. This requires a thorough knowledge of the entire metering system as well as the building management system and administrative access to both systems. · Participate in status calls and in the field to validate contractors working the Wireless to Wired project. This requires thorough understanding of the physical wiring requirements. MODBUS configurations, JACE programming as well as the cyber security requirements to allow devices access to the NIPR. · Participate and review ACAS assessments for the servers · Participate and review JACE devices to provide direct remediation · Participate and review Bi-annual user reviews · Provide annual contingency plan and incident response tabletop exercise · Maintain documentation and proof of security assessments, findings and mitigations. · Provide approved stakeholders with STIG/SRG (Secure technical implementation guidance/secure requirements guide) scan data and result analysis in a format upload able to eMASS. · Participate and review guidance to contractors responsible for NIPR devices. (weekly) · Apply application and operating system updates to the servers (monthly). · Perform and manage backups for servers and JACEs (monthly) · Developed and implemented a process to enable reliable verified meter data collection for buildings. · Perform duties to keep ATO (Authority to Operate) on metering system and prepared a second backup system to be integrated into the ATO. · Update and perform STIG (Secure technical implementation guidance) documentation on servers, cellular routers and building switches bi-annually. · Work directly to assess electric, gas and water availability and accuracy by performing regular spot checks. · Update all IT equipment associated with the metering program and verify weekly ACAS scans from the regional Network Engineering Command. · Pass vulnerability scan results and mitigation strategies to contractors responsible for building point of control (BPOC) devices · Performed the technical installation and integration into the system for buildings’ electric, gas and water meters after renovation are complete. · Work seamlessly with IT and other contractors to unsure meter data is accurately reflected in the Army Meter Data Management System (MDMS) · Physically record and prepare billing data for meters monthly. Requirements: Education Requirements: Master’s degree, Information Assurance Bachelor’s degree, System Integrator or Citrix Engineer Skill Set: Integrate System and Controls on Building Management System Systems Administration System Troubleshooting Policy Implementation Technical Reporting Utility Monitoring IT Infrastructure Monitoring Training Credential Requirements: DoD 8570 IAT level to be the advanced network and computer information assurance. DoD 8570 IAT level to be the system administrator (SA) for the BMS and metering systems. Risk Management Process 2.0 NIST 800-37 NIST 800-53 System Administrator (SA) Card, Knowledge of expert level cybersecurity skills, Knowledge of vulnerability assessment tools (Nessus) Knowledge of Niagara N4 certification. Knowledge of Cyber security expertise

Job Description Oneida Technical Solutions (OTS) is a tribally-owned 8(a) certified IT Network and Telecommunications Services company, wholly owned and operated by the Oneida Nation of New York through Oneida Nation Enterprises, LLC. Headquartered in Oneida, New York, OTS is the direct parent company of Croop-LaFrance, Inc. We are currently seeking a Cybersecurity Documentation and Reporting Specialist (40% Cyber Analyst 60% cyber documentation Admin ) to join our team at West Point Academy. The contracted cyber technician assigned to support the Cybersecurity Branch mission must analyze general information assurance-related technical documents and provides support in collecting, creating, reviewing and approving of said documentation in accordance with the NIST RMF framework. The contractor will assist in the review and implementation of solutions that meet security requirements. The contractor will perform vulnerability/risk analyses of computer systems and applications during all phases of the system development life cycle. • Control documentation in eMASS for requirement compliance., • Report on noncompliance and create tickets for remediation., • Validate and review documentation for compliance with the team., • Regulation review and track through review and approval process., • SOP review and track through review and approval process., • MFR (risk acceptance, exception to policy, etc.) writing and and track through review and approval process., • TTP documentation., • Policy review and track through review and approval process. Serve as staffing officer to ensure timely processing for document updates and signatures., • Update POA&Ms as documentation is processed for RA or compliance and discontinuation., • a) Vulnerability Management Evaluate endpoint security posture against configured compliance baselines, make recommendations to G6 Cyber and G6 CTO on changing of baselines to enhance security without compromising mission functionality, provide mission impact and risk analysis for any recommendations. Determine which software packages must be maintained at the enterprise level, through enterprise patching in software center, and make recommendations to Cyber on priority of patching. Assist Enterprise and IT Support branches in defining package requirements and configuration in Software Center if required., • b) Develop weekly reports from open-source threat assessment evaluating the current threat landscape against products and services utilized in the WREN computing environment, highlight specific critical or impactful threats. Understand changes in the computing environment and how threats could impact users both at West Point and throughout the world. Utilize Army data analytic and open source or proprietary analytic platforms to provide broad spectrum unclassified intel analysis regarding cyber threats., • c) Establish metrics to measure & evaluate information security performance. Define what metrics are indicators of a successful cyber security posture and refine those metrics as technology changes. Create automated measures of metric evaluation to ensure that cyber security configurations and overall security posture is easily understood by Cyber and G6 team. Use metrics to define where additional focus is needed to mitigate existing and future risks. Help maintain metrics and Common Operating Picture used by G6 leadership. Sec+ or equivalent is required. Strong knowledge of DOD/NIST standards required. Oneida Technical Solutions is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics Job Posted by ApplicantPro

Job DescriptionDescription: Education: Bachelor of Science Civil Engineering - 4 Year Accredited Degree or Construction Management Field Experience: 5-10 years onsite Quality Assurance duties as Owner Oversight. Experienced with site/civil construction projects as well as new and renovated improvement projects. Civil work relating to underground utility installation (power, water, electrical, communications), road construction, stormwater culverts and inlets, drainage ditches, pedestrian, and vehicle bridges, spread foundations, caissons, general vertical building construction, structural reinforcement walls, structural beams, concrete walls, tilt-up construction, roof and gutter inspections, and hardscaping/landscaping. Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Follow-up Phase as independent verification). Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Policy Knowledge: USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus. Work Shift Durations: 5-7 days a week, 8-10 hours per day, work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Overtime may occur on limited basis but must be approved in writing by CLIENT prior to start. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. Other Daily Qualifications: • Must possess good written skills for daily inspection reports, and correspondence between Owner and Contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide onsite daily walkdowns, QA inspections, generation of open list items, and closeout activities., • Must function as liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications. Employment is contingent upon successful completion of a background check. Requirements:

Job DescriptionDescription: Job Type Full-time West Point, New York Minimum Requirements: Education: Minimum 4 Year Degree - Bachelor of Science in Mechanical Engineering Actual Field Construction Experience: 10+ years of working in building construction. Direct Hourly Salary: $70/hr. - $80/hr. dependent on education, experience level, skillset and benefit package selected, rates will vary. Daily PPE: Wear standard OSHA hard hat, safety glasses, safety shoes every day during site inspections and oversight services. Position Location: West Point, New York Computer Knowledge: Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team and record management file repository. During field work, PPE must be worn 100% of the time. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to: Mechanical, Electrical, Plumbing, Fire Protection: prepare daily QA reports during mechanical walkdown inspections, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, including any lead or asbestos abatement, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings, • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements:

Job DescriptionDescription: Construction Management Staff at West Point, NY. Education: 4 Year Accredited Degree in Construction Management with 10+ years of QA and Construction Management Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: USACE Record Management System Software systems currently used at Microsoft Office suite of products (Excel, Word, Adobe) Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Knowledge: USACE CQM Certified USACE Unified Facility Code, IBC Code, Uniform Compliance Code (UCC), Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Followup Phase as independent verification). USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus Work Duration: Fulltime. Normal business hours shall encompass the period of 0700 through 1630, Monday through Friday, except Federal holidays. Work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Based on work demand, overtime may be necessary and would occur on occasional weekends and during the daytime. Overtime should not exceed 15% of the total hours. Day-To-Day Construction Activities / Knowledge: The Contractor will be assisting in Charrette process, schematic reviews, design reviews and campus master planning efforts. Contractor will be reviewing A/E designs for compliance with USMA Master Plan, DPW's Engineering Planning Standard (EPS), and all other federal and state regulations and codes, including USDOI standards for historic preservation and SHPO consultation. Develop pre-final (or draft) Requests for Proposals (RFPs). The Contractor shall incorporate the scope of work, as-built drawings, sketches, and other appropriate documents provided from the USACE assigned Project Manager in the development of the RFP for user requested changed. Submit comments citing specific deficiencies and referencing correct information upon review of technical submittals from an installation perspective. Deficiencies shall include but are not limited to design flaws, incorrect citations, grammar, calculation errors, incorrect / missing procedures, and compliance to the construction contract and the relevant codes including federal and state regulations and West Point standards. Submit reports documenting compliance inspections. Inspections shall be performed to ensure compliance with installation requirements, applicable federal, state, and local regulations. Reports shall include but not limited to descriptions of observed tests, defects in structure, envelope, concrete, mechanical, electrical, plumbing, fire protection, fire alarm, and site work. Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. • Sound understanding of the overall supervision of construction operations. Sound understanding of engineering concepts, principles, and practices applicable to construction., • In conjunction with the Engineering Technician (ET), review Activity Hazard Analyses (AHAs) and ensure these are discussed by the construction contractor and their respective subcontractors prior to beginning each work activity or when a new work crew is to perform the work in accordance with the three phases of QC., • Capable of communicating at multiple levels of authority to obtain decisive action from all affected parties, including the Construction Contractor (Contractor), Supported Commands, and other Agencies., • Reviews pre-final contract drawings and specifications (including technical RFPs) with respect to constructability and compatibility with actual field conditions., • Participate in pre-award contract meetings, such as Functional Analysis Concept Development (FACDs) meetings and constructability reviews., • Coordinating post-award contract meetings, such as post-award kickoff meetings (as applicable), preconstruction conferences, partnering meetings, schedule acceptance meeting, design review meetings (as applicable and final inspections., • Review of contractor administrative submittals, such as schedules, environmental plan; design (as applicable) and construction quality control plan; health and safety plan; and accident prevention plan and shop drawings., • Visit construction sites to monitor progress and solicit input from the Engineering Technician/Quality Assurance (ET/QA) representatives, review CQC reports and attend QC meetings., • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.)., • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications.

Job DescriptionDescription: Education: 4 Year Degree - Bachelor of Science in Engineering Field Experience: 5+ years of onsite site/civil construction. Subgrade, subbase, coarse aggregate, concrete, asphalt, curbing, general underground utilities. Also, building erection and structural framing, masonry work, etc. related to vertical construction. Clearance and Qualifications: Must possess an active Common Access Card (CAC) in order to allow access to the field construction management database on the Government assigned computer. Position Location: West Point, New York Computer Knowledge: Familiarity with tracking software database such as Procore, ProjNet, Suretrak, or Ebuilder. Government uses computer software products such as Excel, Word, Adobe PDFs, Microsoft Projects, Primavera Scheduling Software, and AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: DOE, NAVFAC, DOD, and Military installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 50% of the time, while providing 50% of the time daily reporting to Owner project management team. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site, Civil, and Structural. Prepare daily QA reports, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe Contractor QC tests, ensure daily Punch Lists are maintained and accurate, and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities. Interpret construction drawings & specifications, observe and document construction activities with photographs and videos, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements: Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and Contractors., • Must possess good oral skills for leadership role and public speaking at meetings, • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, Quality Assurance inspections, generation of open & punch list items based on contracting documents, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications.

Job Description Job Summary This position shall have overall responsibility for the contractor's quality control management program to include maintaining and overseeing the quality control management program for entire contract. Primary Job Functions • Administer quality control management program, • Responsible for overall quality assurance program, • Monitor and inspect all delivery orders for compliance, • Maintain records of inspections and certifications, • Prepare monthly reports depicting findings of quality inspections, • Periodically review the quality control program to ensure compliance, • Examine processes for preventative and corrective maintenance; make suggestions based on findings, • Perform inspections and re-inspections to ensure problems have been resolved, • Collect data for the DMLSS system including work orders and equipment history, • Research safety and quality topics online, • May prepare incident and accident reports, • May be tasked with preparing training materials and conducting employee safety meetings, • May manage the disposal of hazardous waste, • Fill out RPIE-commissioning forms for new and replacement equipment, • Prepare service order documentation, • Perform QC inspections on service orders and other projects, • May research and issue infection control and interim Life Safety permits, • May train personnel on material control and equipment and tool management, • Other duties as assigned Education, Experience and Certification • Associate degree in related field, • 3 years' experience in preparing and enforcing quality management programs (QMS) on contracts of similar size, scope and complexity, • 2+ years of experience in quality control evaluation and reporting in the fields of construction or facility management work, • 2+ years of experience working in comparably sized health facilities, • OHSA Certifications, highly preferred Knowledge, Skills, and Abilities • Knowledge of OSHA safety regulations and PPE procedures, • Ability to conduct accident investigations and safety inspections, • Strong written and oral communication skills Disclaimer CBRE Government & Defense Services are thrilled at the opportunity for you to apply for one of our roles. The base salary range for this position is $80,000- $100,000. This position may also be eligible for a wide range of competitive benefits that can include but are not limited to medical, well-being, financial planning and short-term benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. #LI-AR1

Job DescriptionDescription: Monday - Friday, 7:00AM - 3:00PM with OT available • Salary $75,000 - $90,000, • Company Cell Phone Provided, • Medical, Dental & Vision Insurance, • 401k with company match, • Voluntary Short/Long Term Disability, • Life Insurance, • 9 Paid Holidays, • Accrued Vacation Time, • Sick Time, • $750 Referral Bonus Program, • $150 Annual Boot Voucher We are seeking a highly organized and proactive Project Manager to assist and coordinate aspects of natural gas operations and back-office functions. This role is critical in ensuring the safe, efficient, and compliant execution of operational objectives, while also managing administrative and logistical support functions. Key Responsibilities: Operations Management: • Monitor job progress and schedule changes., • Manage materials inventory, including tracking quantities and types., • Complete and review EV worksheets for accuracy and compliance., • Participate operational meetings., • Work with operational team to address and resolve operational issues and customer complaints., • Oversee the preparation of as-built drawings for mainline work., • Resolve fleet issues such as breakdowns, tows, and equipment changes., • Address HR-related matters, including staffing, performance, and compliance., • Coordinate IT issues, replacements, and equipment distribution., • Maintain and organize all project-related paperwork, including job plans and job packets., • Review and document daily units and revenue by crew in Excel., • Ensure 100% accuracy in Codex entries (timesheets, leave requests, equipment logs)., • Utilize FSM for dispatching and assigning field tasks., • Oversee invoicing and Comdata processes., • Work with BUC & BUM on monthly financials. This job description is not intended to be all-inclusive. Employee may perform other related duties as delegated to meet the ongoing needs of PPS. Requirements: Qualifications: • 3+ years of experience Office Administration or project management., • Strong knowledge of operational standards in the gas industry., • Proficiency in Microsoft Excel, FSM, Codex, or other project management tools., • Excellent organizational and multitasking abilities., • Strong leadership and team coordination skills., • Effective communication and problem-solving capabilities., • Detail-oriented with a commitment to safety and quality., • Ability to manage administrative responsibilities efficiently.

Job Description ESCO, a division of Eurpac Service, Inc., has over 60 years of proven success representing consumer package goods (CPG) within the complex Military Resale Channel. Providing comprehensive sales and marketing service solutions to our clients. Our processes and proprietary technology are designed to deliver success in this unique retail channel. ESCO is seeking a part-time Base Manager at the West Point, New York commissary. This is an ideal part-time employment opportunity for a spouse, student or retiree. If you are looking for a place to make an impact, then we want to talk to you! SCOPE: Commissary facilities located on specific military bases within defined areas as assigned. CORE COMPETENCIES: BASIC SKILLS: Focused Organized Self-Motivated Effective Communicator Flexibility Professional Appearance Integrity SKILLS: Dependable Plan-Monitor-Review Time Management COMPUTER PROFICIENCIES: Physical Stamina Microsoft Office Suite Principal Responsibilities: Perform daily tasks assigned by EAGLE Eye, Retail IQ, Area Manager (AM) or Area Supervisor (AS) to support operations at designated Commissary locations. Base Manager responsibilities may include, but are not limited to, the following: Call on assigned Commissary and complete tasks assigned by company technology and your AM: Base Manager: • Maintain current product distribution, • Expand distribution of new items using tools and guidance provided by the Area Manager (AM), aiming to meet the 30-day "speed to shelf" objective., • Collaborate with the CAO (Computer Assisted Ordering Associate) to manage shelf maximums (shelf max) for all SKUs., • Proactively stock shelves when out-of-stocks occur and backstock is available, or when independent contractors do not meet stocking expectations., • Secure/sell display activity and build displays as needed, • Secure product demonstration activity and order cases to support these events, • Ensure timely processing of Vendor Credit Memos (VCMs) and Vendor Price Reduction Agreements (VPRAs)., • Maintain proper store call frequency that align with key store personnel availability., • Prompt communication of store issues to AM, • Conduct regular checks for code dates and ensure proper product rotation., • Manage balanced weekly orders for DSD/DSDS (Direct Store Delivery/Direct Store Delivery-Single Order) accounts., • Demonstrate expertise in the use of EAGLE Eye and Retail IQ tools., • Build and maintain positive working relationships with store personnel and company management. Strategic BM Operational BM Tactical BM DRY GROCERY PERISHABLE/HBC Blocking and tackling at the shelf Blocking and tackling at the shelf Promotional Support Keeping the shelves full Keeping the shelves full Securing tough display options Work with Independent contractors Work with Independent contractors Display period execution New Item Speed to Shelf (STS) New Item Speed to Shelf (STS) Pushing OTBs during season GAP Resolution GAP Resolution Maintaining/maximizing display opportunities NIS Mitigation NIS Mitigation Seasonal promotions Signs and coupons Signs and coupons DeCA rack and cooler program execution All VCMs and VPRAs All VCMs and VPRAs Distributor inventory management – OTB and deletes Minimizing Shrink Minimizing Shrink *DSD Weekly orders – Meat, Produce, Muscle Foods Front End Management Perishable Focus Product demonstration management Product Rotation Relationship upselling *DSD Weekly orders – Meat, Produce, Muscle Foods *DSD weekly orders will be the responsibility of the Operational BM when there are 3 roles at one store Joint Work for Strategic, Operational and Tactical BM’s Resets, both section and full store Large mass display builds Comprehensive training will be provided for your specific role. Flexibility is essential, as you may be required to assist with or cover additional roles as operational needs arise. Lifting requirements, temperature restraints and other working conditions and requirements: • Assemble, install, and relocate various types of racks—some weighing up to 100 lbs.—with assistance from team members as needed., • Build displays of up to 40lb case weight, • Work in freezer conditions at 0°ree;F., • Travel for store resets with durations of 1 to 5 days including overnight stays as needed., • Occasional outside case lot sales and weekend special events., • Military base access is required, and candidates must pass a background check. Access is granted directly by the military, not by EURPAC. Existing military base access is highly preferred., • It will be necessary to have access to a computer, printer, and smart phone, and download information from websites., • Preference will be given to qualified candidates who are not currently employed by a competitor. It will be necessary to have access to a computer, printer and smart phone, and download information from websites. EURPAC Service, Inc. maintains a drug-free workplace. All employees are required to successfully complete a pre-employment drug screening. It is the policy and practice of Eurpac Service, Inc., to provide employment opportunities to all qualified persons on an equal basis. The Company will not to discriminate against any employee or applicant for employment because of his or her age, race, color, religion, marital status, pregnancy, sexual orientation, gender/gender identity, national origin, or because he or she is an individual with a disability or disabled veteran, Armed Forces service medal veteran, recently separated veteran, or active duty wartime or campaign badge veteran, or thereinafter referred collectively as "protected veterans" or any other characteristic protected by federal, state or local laws. If you have difficulty using our online system due to a disability and need an accommodation, you may email us at , send a fax to 203-840-8978 or call us at 203-642-1024. In order to quickly respond to your request, please use the words “Accommodation Request” as the subject line of your email or as the title of your fax document. To view the Employee Polygraph Protection Act, please click here: Polygraph Protection Act employee rights (dol.gov)

Job DescriptionDescription: Education: Architectural 4-Yr Accredited Degree. American Institute of Certified Planners (AICP) Field Experience: 10 years minimum of reviewing A/E designs for compliance with Master plan, Engineering Planning Standard (EPS), and all other federal and state regulations and codes, including USDOI standards for historic preservation and SHPO consultation. Prior field experience working on DoD or Federal facilities is highly desirable. Clearance and Qualifications: Must possess an active Common Access Card (CAC) in order to allow access to the Owner and Contractors management database on the Government assigned computer. Direct Hourly Salary: $71/hr. - $80/hr. dependent on education, experience level, skillset and benefit package selected, rates will vary. Position Location: West Point, New York Computer Knowledge: Must be familiar with tracking software databases such as Prolog USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. In addition, the Government also uses general software products such as Excel, Word, Adobe PDFs, Microsoft Projects, AutoCAD, and Primavera Scheduling Software. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, reporting to Owner project management team leader. Day-To-Day Construction Knowledge: Primary responsibilities include but not limited to: assisting in charrette participation with designated A/E firms and USACE CM counterparts, schematic reviews, design/construction reviews, providing oversight on small specialized projects, campus master planning efforts and other related design/construction roles relating to historical preservation. Must be flexible to assist with the large construction programs underway including the Cadet Barracks Upgrade Program (CBUP), Academic Buildings Upgrade Program (ABUP), Energy Management and Conservation Projects (EMCP), and other facility and infrastructure projects. As part of performing project related work, other items such as daily QA reports, collect existing condition data in the field, documenting inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Employment is contingent upon successful completion of a background check. Requirements: Other Daily Position Qualifications: • Must work with agencies such as New York State Department of Environmental Conservation, State Historical Preservation SHPA, Coastal Management Resources, Waterfront Revitalization and Coastal Act, EPA National Pollutant Discharge Elimination System as part of Clean Water Act, along with other local and state authorities., • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner, Engineer, and Constructor, assist with resolving conflicts and identifying solutions to keep the project on-track and avoid delays.