Environmental insurance jobs in Cicero, New YorkCreate job alerts

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Saab Inc.’s Surveillance Systems division in East Syracuse, NY is seeking a Senior Staff Mechanical Engineer. The engineer will be a member of the Mechanical Engineering team responsible for the development of mechanical systems and assemblies across various platforms including; ground based military radars, close combat weapons and missile systems. Responsibilities will include but may not be limited to the following: * Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems. * Develop CAD 2D and 3D models of electronic, mechanical and electro-mechanical components, assemblies and systems. * Documentation of design solutions including reports, engineering drawings and Bill of Materials (BOM). * Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates. * Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements. * Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support. * Incorporate Mechanical Engineering best practices Design for Cost, Maintainability and Manufacturability. * Identify, manage, and solve problems associated with mechanical engineering work products. * Apply experience and knowledge to resolve design, supplier quality, manufacturing, and field issues. * Follow company standard operating procedures and Quality System requirements. * Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs). * Provide effective communication across functional teams. * Work as key member of a cross-functional team to develop mechanical and electro-mechanical solutions. * Domestic and Foreign Travel may be required up to 20% Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Experience and Skills: * Bachelor of Science Degree in Mechanical Engineering. * Minimum of 15 years of relevant experience in advanced mechanical design with broad application and a fundamental understanding of the product development life cycle. * Understanding of mechanical design philosophy and design process flow. * Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes. * Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills. * Demonstrated ability to resolve issues during design, development and execution of mechanical engineering activities. * Experience using SolidWorks, AutoCad, Creo, Ansys, MS Office (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations. * Ability to update and review mechanical drawings for proper geometric dimension tolerancing (GD&T), accuracy, and completeness. * Strong written and verbal interpersonal and communication skills. * Proven contributor on project teams to accomplish objectives. * Effective contributor in a team environment, providing technical leadership where applicable. * Ability to work independently to achieve technical and program requirements. * Ability to work with other engineering disciplines to contribute to a collaborative development environment. Desired Experience and Skills: * Prior experience with DoD or with U.S. government customers is highly desirable. * Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements. * Knowledge of materials and corrosion control. * Experience with Geometric Dimensioning and Tolerancing (GD&T). * Demonstrated performance and proficiency in the elements of Mechanical design, e.g. analysis and implementation of requirements, developing design concepts, evaluating designs, technical analysis, generating designs, design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Saab Inc.’s Surveillance Systems division in East Syracuse, NY is seeking a Senior Mechanical Engineer. The engineer will be a member of the Mechanical Engineering team responsible for the development of mechanical systems and assemblies across various ground based, shipboard and airborne military radar platforms. Responsibilities will include but may not be limited to the following: • Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems., • Develop CAD 2D and 3D models of electronic, mechanical and electro-mechanical components, assemblies and systems., • Documentation of design solutions including reports, engineering drawings and Bill of Materials (BOM)., • Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates., • Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements., • Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support., • Incorporate Mechanical Engineering best practices Design for Cost, Maintainability and Manufacturability., • Identify, manage, and solve problems associated with mechanical engineering work products., • Apply experience and knowledge to resolve design, supplier quality, manufacturing, and field issues., • Follow company standard operating procedures and Quality System requirements., • Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs)., • Provide effective communication across functional teams., • Work as key member of a cross-functional team to develop mechanical and electro-mechanical solutions. Compensation Range: $99,100-$128,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Experience and Skills: • Bachelor of Science Degree in Mechanical Engineering., • Minimum of 8 years of relevant experience in advanced mechanical design with broad application and a fundamental understanding of the product development life cycle., • Understanding of mechanical design philosophy and design process flow., • Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes., • Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills., • Demonstrated ability to resolve issues during design, development and execution of mechanical engineering activities., • Experience using SolidWorks, AutoCad, Creo, Ansys, MS Office (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations., • Ability to update and review mechanical drawings for proper geometric dimension tolerancing (GD&T), accuracy, and completeness., • Strong written and verbal interpersonal and communication skills., • Proven contributor on project teams to accomplish objectives., • Effective contributor in a team environment, providing technical leadership where applicable., • Ability to work independently to achieve technical and program requirements., • Ability to work with other engineering disciplines to contribute to a collaborative development environment., • Prior experience with DoD or with U.S. government customers is highly desirable., • Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements., • Knowledge of materials and corrosion control., • Experience with Geometric Dimensioning and Tolerancing (GD&T)., • Demonstrated performance and proficiency in the elements of Mechanical design, e.g. analysis and implementation of requirements, developing design concepts, evaluating designs, technical analysis, generating designs, design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - East Syracuse, NY If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England including East Syracuse, NY. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Service vehicle with gas card (once trained and independent), • Company-issued cell phone, • Extensive technical training & professional development opportunities, • Health Insurance including medical, dental, vision, life, ad&d, long term disability, • 401K, • Vacation and paid sick time, • Compensation commensurate with experience, • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • This role requires ability to pass a pre-hire drug test, pre-hire background check and provide proof of eligibility to work in the U.S., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service Inc. is a proud drug-free workplace.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary CME is seeking a skilled and detail-oriented Utility Locate and Ground Penetrating Radar (GPR) Technician to join our team. The successful candidate will be responsible for utilizing advanced technology to identify and map underground utilities, ensuring accurate and safe excavation practices. This role requires a strong understanding of utility systems, excellent technical skills, and the ability to work independently and as part of a team, under the supervision of a Licensed Engineer. Responsibilities • Utility Location: Use electromagnetic locating equipment to identify and mark underground utilities including water, sewer, gas, electric, and communication lines., • Ground Penetrating Radar: Operate GPR systems to detect and map subsurface structures, objects, and anomalies. Analyze GPR data to provide accurate reports and interpretations., • Data Interpretation: Review and interpret data from utility locate and GPR systems, creating detailed maps and reports for use in planning and excavation., • Field Surveys: Conduct field surveys and inspections to verify utility locations and assess site conditions., • Documentation: Maintain accurate and detailed records of utility locations, GPR data, and field observations., • Safety Compliance: Adhere to safety protocols and standards to ensure safe working conditions on job sites. Report any potential hazards or safety concerns., • Customer Interaction: Communicate effectively with clients, providing clear explanations of findings and recommendations., • Equipment Maintenance: Perform routine maintenance and calibration of utility locating and GPR equipment to ensure optimal performance., • Education: High school diploma or equivalent, along with technical certification in utility locating and GPR technology. Bachelor’s or associate degree in geology, civil engineering, or a related field is preferred., • Experience: Minimum of 2 years of experience in utility locating, ground penetrating radar, or a related field. Experience in construction or civil engineering is a plus., • Technical Skills: Proficiency in operating utility locating equipment and GPR systems. Ability to analyze and interpret data from these technologies., • Knowledge: Strong understanding of underground utility systems, mapping techniques, and safety regulations., • Physical Requirements: Ability to work in various environmental conditions, including outdoor sites and confined spaces. Must be able to lift and carry equipment as needed., • Communication Skills: Excellent verbal and written communication skills. Ability to convey technical information to non-technical stakeholders., • Attention to Detail: Strong analytical skills and attention to detail in data collection and reporting. Working Conditions • This position involves working outdoors in varying weather conditions and potentially hazardous environments., • May require occasional travel to different job sites. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 4Rog9eK1LT

Must be certified with Bureau of Environmental Radiation Protection as a Radiologic Technologist and to inject contrast media during radiologic procedures within 90 days of hire Crouse Hospital offers a one of a kind benefits package! Affordable Health, Dental and Vision Insurance Employee discount

Job Description As a Battery Technician, you will maintain, inspect, diagnose, install, repair, clean, and replace various types of industrial batteries and charges used in material handling equipment. Perform repair and planned maintenance work on batteries and charges or related equipment ensuring service meets all customer, business, and quality standards and requirements. Some responsibilities include: Perform equipment diagnostics and repairs on a variety of batteries utilizing ferro-resonant, SCR, and high-frequency technology chargers. Tasks include, but are not limited to: cell replacements, cable repairs, connector and contact tip replacements on customer and rental equipment. Execute planned maintenance agreements, including battery inspections, battery watering, battery washing, and recording of cell voltages and specific gravities. Conduct charger inspections and perform calibrations, and adjustments, as necessary. Coordinate problem resolution with Technical Support, Customer Service, Sales, and other personnel as needed to expedite repairs. Install and/or assist in the installation of batteries, chargers, battery/charger stands, battery handling systems, multi-level battery racking systems, man-on-board battery changers, battery monitoring systems, and battery watering systems. Evaluate and maintain battery handling equipment and accessories including battery changers, battery wash cabinets, battery watering systems, electronic battery rotations systems, and battery monitoring systems. Complete and maintain accurate records for all service orders, PM worksheets, time cards, and any other documentation as required, in an accurate and timely manner. Documentation includes, but is not limited to, warranty programs, regulatory requirements relative to OSHA, DOT and Hazmat regulations as well as other general safety and environmental rules and regulations. Qualification Standards Include: • Must be able to safely operate power tools, lifts, hoists, hydraulic jacks and material handling equipment., • Must be able to drive to customer locations for service calls., • Ability to learn to use oxygen/acetylene torch safely and effectively., • Ability to handle energized equipment (cells, batteries, and chargers) safely., • Knowledge to ability to understand the necessary service and training manuals, interpret schematics, effectively use diagnostic instruments and perform all maintenance and repair work accurately, efficiently, and safely to prevent injury to yourself or others and damage to equipment., • Ability to work independently using effective organizational and time management skills with minimum direction., • Must have strong analytical, problem-solving and organizational skills to gather data, compile information, and prepare routine paperwork., • Must be able to communicate professionally verbally and in writing., • Must be able to understand and follow directions, safety rules, and standard operating procedures. Equivalent combinations of education and experience will be considered. Family Culture is #1 in our eyes and we embody loyalty, friendliness, teamwork and FUN! Come work for one of the Best Places to Work in CNY and be appreciated and respected as a true family member! Perks/Benefits Provided: FREE Medical /Vision $100 company clothing allowance Dental Paid Vacation/ Sick Time/Holidays 401K with 50% company match $100 Boot allowance Life/Accident/Cancer Insurance Rx Safety Glasses Ongoing Paid Training Uniforms/Service Van/Tablets $500 Tool allowance Company picnics/parties $200 Gym membership reimbursement Up to $8000 Sign on Bonus If you have a positive CAN-DO attitude and are seeking career satisfaction with room to grow and a place to retire from, then we have the opportunity for you. $26-$33 hr Thompson & Johnson is an Equal Opportunity/Affirmative Action Employer, (M/F/D/V) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Job Title: Assistant Controller Reports To: Controller FLSA Status: Exempt Supervisory Responsibilities: Yes – Functional Area Leader Job Summary: Under the direction of the Controller, they will oversee the daily operations of the company’s accounting, financial and administrative departments. This role will oversee about 3 staff members and be responsible for the company's financial policies, programs and practices. Strategic vision, ability to work in ambiguity and development and adoption of best practices will be important for this role. Duties include formulating policies and procedures for the Accounting Department, maintaining cash flow and budget for the company, P&L and cost analysis. Supervisory Responsibilities: • Assist and participate in the accounting department, maintaining cash flow and budget for the company, P&L and cost analysis., • Conducts performance evaluations that are timely and constructive., • Provides direct supervision to one or more employees. Essential Job Functions and Responsibilities: • Oversee all financial functions including accounting, budgeting, insurance, cash management, and participate in the corporate strategic planning process., • Prepare reports which summarize and forecast company business activity and financial position in areas of income, expenses and earnings based on past, present and expected operations., • Direct preparation of budgets, reviews budget proposals and prepares necessary supporting documentation and justification., • Prepares and maintains month end financial analysis packages., • Individual directs determination of depreciation rates to apply to capital assets. Prepares covenant compliance reporting package ensuring accuracy and completeness. Prepares and maintains the Company’s financial policies and procedures., • Preparation of financial summaries for management review. Risk Management., • Co-ordination of business planning and budgeting; ongoing forecasting and projections. General performance reporting and operational performance measurement., • Competence to define problems, collect data, establish facts and draw valid conclusions., • Ability to read, analyze and interpret Advanced computer skills in word processing software, spreadsheet software, accounting software and inventory software required., • Requires predominately sedentary work such as sitting at a desk and computer for extended periods of time, up to 8 hours at a time., • Work is performed in an office setting with limited exposure to loud noises, odors, extreme variances in temperature or other environmental factors., • Requires occasional exposure in the manufacturing plant to irritants such as loud noises, fumes, exhaust, or other environmental factors. Education and Experience: • Bachelor’s degree in accounting, Finance, or business administration is highly desirable., • A minimum of 1-3-years’ experience of accounting with strong GAAP understanding, preference to those that have worked in an unionized environment and/or manufacturing. Pay and Benefits: • Salary: $80,000 - $100,000 per year base. This position is eligible for a discretionary bonus., • Company paid short-term and long-term disability, and life insurance., • 401(k) enrollment after 6 months of service, with a 50% match of the first 6% contributed by the employee., • Medical, dental, vision insurance enrollment eligible the first month after hire., • Paid time and vacation time.

Job Description Job Title: Quality Assurance and Control Manager Reports To: General Manager FLSA Status: Salaried - Exempt Supervisory Responsibilities: Yes Position Summary: The quality assurance an control manager is responsible for delivering the optimum quality of a company’s services and goods. In addition to maintaining consistent quality, helping to ensure compliance with laws, regulations, and environmental standards, recommending improvements where necessary. Must be able to work within a team environment, exhibit good interpersonal skills, leadership and have experience in a manufacturing environment. Essential functions include but not limited to: • Create and implement company quality standards., • Accomplishes quality assurance objectives by monitoring, reviewing, and enforcing policies and procedures., • Train and motivate employees to ensure that quality standards are met., • Achieve quality assurance operational objectives by contributing to information analysis., • Meet financial objectives by estimating requirements, preparing annual budgets, and scheduling expenditures., • Develop quality assurance plans by conducting hazard analyses and monitoring procedures., • Validate quality processes by establishing product specifications and quality attributes., • Assist in the recruiting process., • Maintain and improve product quality by completing product, company, system, and compliance audits., • Prepare quality documentation and reports by collecting, analyzing, and summarizing information and trends., • Focus on long-term goals while maintaining the day-to-day requirements., • Supports certification audits including ISO 9001., • Must be willing to work reasonable overtime., • Provide training to other new technicians. Education/ Skills /Experience: • A minimum of an Associate Degree in Engineering Technology or similar field, • Minimum of three years of work experience, • Demonstrated knowledge of working on CMM instrument., • Knowledge of statistical and SPC methods, • Knowledge of Microsoft office Products (Outlook, Excel, PowerPoint, Word, etc.), • Working knowledge of ISO standards and Internal Audits, • Demonstrated strong analytical problem-solving skills, • ASQ Certification, • ISO Lead Auditor, • Lean Manufacturing and/or Six Sigma certification, • Ability to teach and mentor Work Remotely: No Job Type: Full-time Salary: $80,000.00 - $100,000.00 per year plus bonus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Schedule: 8-hour shift. Hours subject to change based on business needs.

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description LaBella is currently looking to hire an Environmental Engineer with air permitting experience in our growing, multi-disciplinary, Environmental Division. LaBella has over 1,800 employees in over 30 offices throughout 13 states. This is an opportunity for a smart and talented professional with enormous upside potential as part of a growing company. We are seeking a highly motivated individual with an entrepreneurial spirit to join a dynamic team working on exciting, multi-phase, technically engaging, and impactful projects. The successful candidate will be responsible for managing air permitting and air compliance projects for industrial, municipal and state agencies. The successful candidate will have a working knowledge of NYSDEC air regulations, air dispersion modeling and emission calculations (potential-to-emit and actual). The successful candidate will assist project managers with developing proposals with scope of work and cost for client review and conduct necessary site visits/field inspections for new air permits/registrations and assessing compliance with existing permits. LaBella offers excellent training and career advancement opportunities and outstanding benefits. Duties • Experience with Title V air permits, state facility permits and air registrations, • Familiarity with NYSDEC air regs and Fed NSPS and NESHAP, • Knowledge of regulations concerning criteria, non-criteria, HTAC, HAPs and their respective state/fed thresholds, • Familiarity with NYCRR Parts 621 & 617, • Familiarity with NYCRR Part 212 analysis (including DAR-1/SGC & AGC & DAR-10/modeling guidelines), • Familiarity with surface coating (e.g., paint booths and NYCRR Part 228), • Some familiarity with air dispersion modeling (e.g., AERSCREEN, AERMOD), • Familiarity with PTE and actual emissions calc (using AP-42 EFs, Engineering calculations, mass balances, etc.), • Methos 9 certified (for plume/opacity observation), a plus!, • Familiarity with EPA Reference Methods for air pollutant measurements (40CFR60 Appendix A) & NIOSH Methods for indoors and personnel testing/measurements, • B.S. degree in Engineering (Chemical or Environmental), • NY State Licensed Professional Engineer, • 7-15 years of experience in a related local environmental position, • Ability to work independently and as part of a team, • Ability to work in a fast-paced environmental consulting team environment., • Ability to work within a multi-disciplined group of professionals., • Strong communication skills (active listening, written, and verbal), • Organized with strong attention to detail, • Highly motivated, with excellent client service skills and a positive attitude, • Strong problem-solving skills, • Valid NYS driver’s license, lean driving record, and reliable transportation Salary Range: $75,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Are you ready to take the next step in your project management career? Fisher Associates is seeking a motivated Transportation Project Manager with a strong foundation in civil engineering, infrastructure design, and quality control to join our growing team. In this role, you’ll play a key part in ensuring the technical accuracy, functional quality, and creative problem-solving that define our project success. You’ll work collaboratively with internal teams and directly with clients—managing deliverables, maintaining client satisfaction, and driving projects forward from concept through completion. If you're passionate about project delivery, client service, and continuous improvement, we want to hear from you. Join a firm where your voice matters and your growth is a priority. Ready to join us? Apply today and start leading projects that shape your community. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging transportation engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Transportation Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 10+ years transportation design engineering and project management experience, • Ability to manage transportation projects including highways, structures and traffic., • Professional Engineering License (PE) preferred or ability to obtain it, • Proven Client relationship and business development experience, • Proficiency in MS Office programs and MicroStation (preferred), • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description LaBella has an immediate opening for a Team Leader in our Municipal Group. Reporting to the Discipline Leader, this position is responsible for leading a team of project managers, design professionals and technical support staff working with public sector (Municipal and State agency) clients and projects throughout the NY. The position is in our Syracuse, NY office. Essential Duties & Responsibilities: • Project development, client interaction, project management and technical design primarily for public sector clients (municipal, county, state and non-profit)., • Project management responsibilities include development of professional services proposals, management of projects and clients, development of technical approaches to projects, and participation in public presentations/engagement process., • Develop projects with clients and then oversee and manage the project design and construction while interfacing with the client., • Bachelor’s degree in civil or environmental engineering, • 15-20 years of practical experience in a professional consulting environment, • Registration as a Professional Engineer (PE) NY is required., • Candidate must be experienced in civil/environmental engineering with a preferred focus on all facets of municipal/public works engineering and water resources infrastructure., • Effective communication skills using oral, graphic, and written forms., • Ability to perform assigned tasks with minimal supervision., • Ability to travel to project sites and work remotely as needed., • Ability to manage workload and budgets as allocated., • Effective verbal and written communication skills and the ability to collaborate efficiently with teammates in different disciplines and different locations., • Able to interact effectively with clients, project teams, and colleagues internally., • Experience in project management and solid project financial management skills., • Communications and analytical/problem solving skills are essential. Preferred Qualifications: Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Set up and operate various types of saws horizontal and vertical lathes, saws and drill press equipment and perform various turning, drilling, taping, and boring operations on a variety of carbon and alloy steel plate for forging and stamping parts. BENEFITS: • Health Insurance, • Life Insurance, • 40 Hours Sick Time, • 40 Hours PTO, • 401K, • 401K Matching, • 11 Paid Holidays, • Up to $700.00 reimbursement for Dental and Vision claims for employee. ESSENTIAL JOB DUTIES: • Author new programs and access and run existing programs and edit as necessary., • Aid tool room with tooling and fixtures for shop as needed., • Work with tooling vendors to assess tools and make recommendations, • Work from operational orders and/or parts drawings and make necessary tool, speed and feed changes to accommodate varying size and configuration of parts., • Read and interpret measuring devices, • Set up and operate turret/chucking lathes and turn/bore various size diameters and holes, • Set up and operate single and multiple spindles and radial drill press, and drill, tap, bore, and counter bore through and blind holes, • Diagnose problems encountered in making set ups and running production to determine corrective action, • Obtain first piece inspection approval and periodically visually inspect and/or gauge work for quality appearance and dimensional accuracy, • Follow quality control standards to ensure meeting quality and quantity requirements, • Maintain coolant, oils and hydraulic fluids, and monitor performance as instructed, • Monitor wear of consumable tools and notify supervisor as required, • Follow quality control standards to ensure meeting quality and quantity requirements, • Accurately report work performed, • Keep work area neat and orderly and follow all safe work practice requirements, • Maintain identification of all parts and materials and record location of same, • Report abnormal machine operating conditions immediately, • Perform daily forklift inspections, • High school diploma or general education degree (GED) required and 3 years CNC experience strongly desired., • Must be able to successfully operate an overhead crane, • Possess and practice good oral and written communication skills., • Treat fellow co-workers with dignity and respect., • Possess and utilize basic math skills and exercise superior organizational skills, • Prior CNC, production machine and/or welding experience highly desired., • Maintain and exhibit a positive attitude toward our work and our work environment., • Demonstrated experience with hand and power tools, banders, hoists, and other production equipment, as well as an overall mechanical aptitude, • Forklift certification required. Basic personal computer skills that include the ability to send/receive e-mail messages. May be required to operate Computer, Email, Microsoft Excel, Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 20 pounds of force frequently and/or up to 50 pounds of force occasionally and/or a negligible amount of force frequently to move objects. MENTAL AND VISUAL DEMAND: Close mental and visual attention to prepare and analyze data and figures, work on a computer, read, or control machines or processes at a rapid pace that requires close coordination and fine adjustment. Moderate mental and visual attention to perform manual work, machine operations, set-ups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation. ENVIRONMENTAL CONDITIONS: Work Environment: Work in production area exposed to seasonal temperatures, both high and low. Occupational Hazards: Proximity to moving mechanical parts, moving vehicles, electrical current, welding flash and exposure to potential injury without safe work practices and appropriate personal protective Equipment (PPE). Safety Equipment: May wear a variety of PPE, including safety glasses with side shields, safety shoes and other required PPE in accordance with working tasks. PPE may include gloves and hearing protection when performing certain functions. EMPLOYER'S DISCLAIMER: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum transportation experience including Precast concrete design engineering, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the region’s most impactful infrastructure efforts: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in AutoCAD/Civil 3D and MicroStation/OpenRoads, • Estimated Salary Range: $97,760 - $120,640/year* WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Job Title: Quality Control Lab Technician Reports To: Quality Control Manager FLSA Status: Non-Exempt, Hourly Supervisory Responsibilities: No – Individual Contributor Under the supervision of the Quality Control Manager, the Quality Control (QC) Technician will have the following job requirements. This is not an exhaustive list and other job duties may be assigned. Work will be completed in a manufacturing environment, specifically an iron foundry. Essential Job Functions and Responsibilities: • Adhere to established safety procedures and 5 S standards (Sort, Set in order, Shine, Standardize and Sustain the cycle) required to perform daily duties in this position, including the proper techniques used in lifting/moving of parts., • Ability to read internal process documents and ensure chemistry is accurate., • Perform chemical analysis by using Spectrometer., • Perform microstructure analysis using a microscope., • Follows all laboratory sample preparation procedures needed to qualify production releases., • Maintain accurate recordkeeping for the traceability of all test results for future reference., • Will be required to use a carbon-sulfur induction furnace and perform tests to always determine the amount of carbon and sulfur in the sample piece safely., • Prepare test samples by sanding and polishing, using tabletop and stand-up belt sanders., • Operate scales (electronic) to determine the weight of the sample., • Mix polishing powders, materials to make polishing molds, liquids to make etchant, and materials to make a solution critical for the methylene blue test., • Ability to operate a band saw, and tool grinder in a safe manner., • Examine parts for hardness (Brinell) and gauging inspection ability., • Machine and examine test bars for physical properties by utilizing a lathe and Tinius Olsen tester., • Perform application tests on parts to ensure parts can withstand required forces and meet associated specification values., • Other duties as assigned, required being flexible in their daily job assignment. Required Skills or Abilities: • Ability to work individually towards assigned goals and key performance indicators., • Utilize precision devices and record data accurately., • Strong organizational skills with attention to detail and able to recognize outliers in recorded data., • Possess time management skills required to handle daily assigned work and other assignments as needed., • Proficient with basic Microsoft Office Suite to include Outlook, Excel and Word. Physical Requirements: • Requires work such as sitting at a desk or computer for periods of time, standing or walking for up to 8 hours throughout the shift on hard surfaces., • Must be able to handle precision devices with manual dexterity and the ability to traverse the manufacturing plant and warehouse to access samples, conduct testing or evaluate in-process work., • Work is performed in a manufacturing environment which has some exposure to environmental factors such as loud noises, odors, variances in temperature and dust., • Must be able to lift up to 25 pounds at times without assistance and up to 50 pounds with assistance. Education and Experience: • Requires a high school diploma or equivalent., • 1-2 years manufacturing, quality or laboratory work is preferable. Salary and Benefits: • $19.00 - $23.00 per hour, eligible for overtime after 40 hours in a week., • 401(k) enrollment after 6 months of service., • 401(k) matching – 50% of the first 6% contributed by the employee., • Medical, Dental and Vision insurance., • Health savings account., • Company provided Short and Long-term Disability, and supplemental Life Insurance., • Paid time off and vacation time.

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Advance Your Career in Environmental Science – Make a Real-World Impact Are you an Environmental Specialist, Environmental Scientist, or Environmental Engineer looking to take your career to the next level with hands-on, impactful work? Fisher Associates is seeking an Environmental Specialist II to join our mission-driven team dedicated to environmental consulting, site assessments, remediation, and regulatory compliance. In this role, you’ll lead and support Phase I and II Environmental Site Assessments (ESAs), oversee cleanup and remediation projects, and ensure compliance with local, state, and federal environmental regulations. Your expertise in environmental investigations, remediation strategies, and sustainability practices will directly protect natural resources and build stronger, more sustainable communities. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Plan and execute Phase I and II Environmental Site Assessments (ESAs), due diligence investigations, and environmental compliance audits in accordance with ASTM standards., • Design and implement site remediation programs including soil, groundwater, and vapor mitigation., • Prepare site characterization reports, corrective action plans, soil management plans and site-specific health and safety plans., • Perform field inspections, including sampling of soil, water, vapor, and air; well monitoring; and operation and maintenance of remediation systems., • Oversee field activities such as drilling, sampling, and remediation system installation with minimal supervision., • Coordinate effectively with laboratories for sample submission and chain-of-custody documentation., • Interpret environmental data and prepare technical reports, analytical data tables, plume mapping, and collaborate on GIS mapping for project documentation and regulatory submittal., • Monitor, collect data for, and optimize ongoing remediation systems., • Coordinate with regulatory agencies, subcontractors, and clients., • Serve as Site Safety Officer, ensuring projects comply with applicable environmental laws and health and safety standards, including any required training requirements., • Collaborate across multidisciplinary teams to deliver integrated environmental solutions., • Ensure QA/QC standards are met throughout the project lifecycle., • Provide technical support for proposals, cost estimates, and remediation planning., • Support abatement-phase construction administration., • Conduct compliant asbestos building inspections, quantifications, draft reporting, and project air monitoring., • Conduct compliant materials inspections for lead paint, PCB-caulk, mold, and universal waste. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects as an Environmental Specialist II and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as an Environmental Specialist II • B.S. in Environmental Science, Geology, Engineering, or related field., • Minimum of 5-10 years of relevant experience in site remediation and environmental consulting., • Knowledge of EPA and state remediation regulations (CERCLA, RCRA, NYSDEC, PADEP, etc.)., • Experience with remediation technologies (e.g. ISCO, SVE, bioremediation, excavation)., • Strong analytical and problem-solving skills., • Excellent communication and report-writing abilities., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Building Inspector strongly preferred., • NYSDOL certifications including Asbestos Air Monitor, Project Designer, or Mold Assessor a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, AutoCAD, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots.

Job DescriptionDescription: Raulli & Sons, Inc. is seeking a highly motivated Safety Director to join our leadership team. This role is responsible for developing, implementing, and sustaining a best-in-class safety culture across our facilities and field operations. The Safety Director will provide strategic vision, ensure compliance with OSHA and DOT standards, reduce risk, and drive continuous improvement in workplace safety and employee well-being. Key Responsibilities • Lead company-wide safety strategy aligned with organizational goals and industry best practices., • Provide leadership to the Shop Safety Manager and mentor site/field safety representatives., • Serve as the primary liaison with OSHA, DOT, DEC, and other regulatory agencies., • Oversee DOT/FMCSA programs including driver qualification, vehicle inspections, and accident reporting., • Develop and enforce safety programs such as JHAs, fall protection, confined space, and lockout/tagout., • Establish and track safety KPIs such as incident rate reduction, compliance scores, and near-miss reporting., • Design and deliver engaging training programs that exceed OSHA requirements., • Lead emergency response planning, drills, and serve as Emergency Coordinator., • Partner with HR to integrate safety into onboarding, performance management, and employee engagement.Requirements:, • Bachelor’s degree in Occupational Safety, Environmental Health, or related field (or equivalent experience)., • 5–7+ years of EHS leadership, preferably in construction or fabrication., • Strong knowledge of OSHA regulations, rigging, MEWP, forklift safety, and crane operations., • Experience with OSHA Subpart R (Steel Erection) preferred., • Proficient in Microsoft Office and safety management software., • OSHA 30 required; OSHA 500/510 and CSP/CHST certification preferred., • FMCSA/DOT compliance experience required., • First Aid/CPR instructor certification preferred., • Must be comfortable in both office and occasional manufacturing/field environments Physical Requirements, • Ability to lift and carry up to 25 pounds occasionally, and up to 50 pounds with assistance on rare occasions., • Frequent standing, walking, talking, and hearing in shop and field environments., • Occasional climbing, kneeling, crouching, and stooping when performing inspections., • Ability to sit for extended periods for administrative tasks. What We Offer We know the value of your work and we show it through competitive benefits and a long-term commitment to your success: • Employee Stock Ownership Plan (ESOP), • 401(k) with Company Match – Invest in your future, • Paid Time Off (PTO) – Because rest is part of the job, • 6 Paid Holidays – To spend time where it matters most, • Job Stability & Growth – Join a company built to last, with room to grow, • Dental Insurance – Keep your smile healthy, • Health Insurance – Quality coverage for you and your family, • Health Savings Account Match – Extra support for medical expenses, • Life Insurance – Financial protection for those who depend on you, • Supportive, Family-First Culture – Be part of a team that values your voice, your safety, and your life outside of work Raulli & Sons, Inc. is an Affirmative Action and equal opportunity employer and does not discriminate in any aspect of employment. The following factors are never used to decide an employment action: sex, sexual orientation (includes perceived sexual orientation), age, religion or creed (including observance of the Sabbath), color, race, national origin, citizenship, marital status, family status (being pregnant, caring for a child under 18, or seeking to adopt a child under 18), military status or service, veteran status, prior arrest or criminal accusation (unless the conviction is directly related to the job duty or poses an unreasonable risk to persons or property), prior convictions (unless job related) gender identity, physical or mental disability (including use of a service dog), domestic violence victim status, crime victim status, genetic predisposition or carrier status, lawful product use or lawful recreational activities when not at work, retaliating against employees who file discrimination complaints, political activity, or any other category protected by a law.

Job Description Job Title: Human Resources Manager Reports To: General Manager FLSA Status: Exempt Supervisory Responsibilities: Yes – Functional Area Leader Frazer and Jones is a leading manufacturer of malleable and ductile iron castings serving a multitude of various industries with a rich history of over 175 years. We are seeking a dynamic Human Resources Manager to join our team and support our mission by enhancing our workforce and workplace culture. Job Summary: Under the direction of the General Manager oversees the daily operations of Human Resources, Payroll and Labor Relations functions for the plant. This position oversees the interviewing, hiring, training and termination of employees. Maintains, interprets, and adjusts policies and procedures, along with the collective bargaining agreement. Provides support for employee benefits, leaves of absence and other functions as it relates to Human Resources. Supervisory Responsibilities: • Oversees and participates in the recruitment, hiring, and training of managerial and hourly employees., • Conducts performance evaluations that are timely and constructive., • Handles discipline and termination of employees as needed and in accordance with company policy., • Provides direct supervision to one or more employees. Essential Job Functions and Responsibilities: • Handles routine and complex or sensitive Human Resources-related items such as payroll inquiries, interpretation of company policies or collective bargaining agreement, training and development as well as performance management., • Performs weekly payroll processing for two business units, including 401k contributions, benefit deductions, garnishments and other items as needed., • Serve as the primary point of contact for employee concerns, mediate disputes and foster a positive workplace culture through effective communication and conflict resolution., • Implements performance appraisal systems, provides guidance on performance improvement plans, and supports managers in developing their teams., • Identifies training needs, coordinates training programs and promotes employee development initiatives to enhance skills and career growth., • Ensures compliance with labor laws, regulations, company policies, health and safety standards and collective bargaining agreement., • Administers compensation and benefits programs, conducts salary reviews, open enrollment and benefit administration., • Analyzes HR metrics to assess the effectiveness of programs and initiatives, prepares reports for management to inform strategic decisions., • Consults with line management, providing HR guidance when appropriate., • Manages and resolves complex employee relations issues. Conducts effective, thorough and objective investigations., • Provides day-to-day performance management guidance to line management (e.g., coaching, counseling, career development, disciplinary actions)., • Excellent verbal and written communication skills with the ability to effectively communicate with different layers of the organization., • Strong interpersonal and customer service skills, with emphasis on emotional intelligence., • Outstanding organizational skills and attention to detail., • Ability to comprehend, interpret, and apply the appropriate sections of applicable laws, guidelines, regulations, ordinances, and policies., • Ability to acquire a thorough understanding of the organization's hierarchy, jobs, qualifications, compensation practices, and the administrative practices related to those factors., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software., • Proficiency with HRIS and payroll software, especially with ADP Workforce Now is desirable. Physical Requirements: • Requires predominately sedentary work such as sitting at a desk and computer for extended periods of time, up to 8 hours at a time., • Work is performed in an office setting with limited exposure to loud noises, odors, extreme variances in temperature or other environmental factors., • Requires occasional exposure in the manufacturing plant to irritants such as loud noises, fumes, exhaust, or other environmental factors., • Must be able to lift 15 pounds at times without assistance. Education and Experience: • Requires an associate’s degree in business management or an alike field, or equivalent experience in lieu of education may be considered., • Bachelor’s degree in human resource management, industrial labor relations or business administration is highly desirable., • SHRM-CP or SHRM-SCP designation is highly desirable., • A minimum of 3-years’ experience as HR Generalist or alike roles, preference to those that have worked in an unionized environment and/or manufacturing. Pay and Benefits: • Salary: $80,000 - $100,000 per year base. This position is eligible for a discretionary bonus of 20% of base salary., • Company paid short-term and long-term disability, and life insurance., • 401(k) enrollment after 6 months of service, with a 50% match of the first 6% contributed by the employee., • Medical, dental, vision insurance enrollment eligible the first month after hire., • Paid time and vacation time.

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Syracuse, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Position Title: Service Technician II Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • Well make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer.Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reportsanycontraventionoflegislationorcompanypolicy, procedureorprogramtodirectsupervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Usesandmaintainsappropriatepersonalprotectiveequipment(PPE) asprescribedbycompanyprogram(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Providesinputondevelopingsafety initiatives and plans toeliminateexposuresthatcouldcauseaccidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 2+ years experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid drivers license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

Job DescriptionDescriptionHOUSEKEEPING SUPERVISOR - FULL-TIMEAPPLY TODAY! Our company is currently seeking an experienced Housekeeping Supervisor to assist the Director of Housekeeping oversee the Housekeeping Department. Housekeeping Supervisor with experience in a long-term care facility, hospital, or healthcare setting preferred. Housekeeping Supervisor Key Duties • Reviews daily staffing to ensure adequate coverage for all areas of responsibility., • Conduct environmental rounds in areas of responsibility, paying particular attention to restrooms and corridors. Full compliance with standards of cleanliness., • Ensure needed supplies and equipment are available., • Operate commercial laundry and cleaning equipment to provide fresh clean linens., • Perform other job-related duties as they become required. Housekeeping Supervisor Qualifications • High school diploma or general education degree (GED)., • 1 year long-term care of healthcare experienced preferred., • Must have verbal and written communication skills. Housekeeping Supervisor Benefits Benefits: • Health, Dental and Vision Insurance, • Paid Time Off and Paid Holidays, • Uniform Shirts Provided, • Direct Deposit, • 401K, • Paid Orientation and Training, • Opportunities for career advancement

Job Description We are seeking a part-time Housekeeping Janitor to perform building services. The successful candidate will be highly organized, dedicated, and able to handle a variety of duties simultaneously. You will work with management to maintain an effective cleaning schedule, which will include your day-to-day routines and work timetable. • candidates must be 18 years of age or older and ABLE TO CLEAR FEDERAL FINGERPRINT BACKGROUND CHECK AND DMV BACKGROUND CHECK. Responsibilities: 1. General Cleaning: • Sweep, mop, and vacuum floors to remove dirt, debris, and dust., • Empty and clean waste receptacles and disposal of trash., • Clean and sanitize surfaces such as desks, countertops, and tables., • Dust furniture, equipment, and fixtures., • Clean and polish windows, mirrors, and glass surfaces., • Clean and sanitize restrooms, including toilets, sinks, and fixtures., • Refill restroom supplies (e.g., soap, paper towels, toilet paper). 2. Floor Maintenance: • Strip, wax, and buff hard surface floors., • Shampoo and extract carpets and rugs., • Remove stains and spills from floors. 3. Specialized Cleaning: • Follow specific cleaning protocols for sensitive areas (e.g., repair rooms, server rooms)., • Clean and sanitize high-touch surfaces, including door handles and light switches., • Use appropriate cleaning agents for different surfaces and materials., • Operate specialized cleaning equipment (e.g., floor scrubbers, carpet extractors). 4. Safety and Compliance: • Adhere to policies and complete all required and mandatory trainings timely., • Follow established safety guidelines and procedures., • Adhere to health and safety regulations related to cleaning chemicals and equipment., • Report any maintenance or repair needs to the appropriate personnel., • Maintain knowledge of and comply with Ecobrite's and Client's security and confidentiality policies. Qualifications: 1. Education and Experience: • High school diploma or equivalent preferred., • Previous experience in commercial or institutional cleaning is an asset. 2. Skills and Abilities: • Knowledge of cleaning techniques, materials, and equipment., • Ability to follow instructions and work independently., • Good organizational and time management skills., • Attention to detail and thoroughness in completing tasks., • Effective communication skills to interact with coworkers and supervisors. 3. Physical Requirements: • Ability to stand, walk, and perform physical tasks for extended periods., • Lift and move heavy objects (up to 50 pounds) as required., • Bend, stoop, and reach clean low and high areas., • Ability to work in various environmental conditions, including exposure to cleaning chemicals. Job Type: Part-time Benefits (for full-time): • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 4 hour shift, • 8 hour shift, • Day shift, • Night shift availability, • Day Shift (Required) Work Location: Multiple location Equal Employment Opportunity Employer Ecobrite Services, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Ecobrite Services, LLC's management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please inform your recruiter.

Position Title: Service Technician II Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • Well make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer.Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reportsanycontraventionoflegislationorcompanypolicy, procedureorprogramtodirectsupervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Usesandmaintainsappropriatepersonalprotectiveequipment(PPE) asprescribedbycompanyprogram(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Providesinputondevelopingsafety initiatives and plans toeliminateexposuresthatcouldcauseaccidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 2+ years experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid drivers license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

JOB TITLE: Microbiologist Location: East Syracuse, NY (100% onsite) Duration: 12 months initial (potential extension/potential right to hire) Conducts routine microbiological analyses of environmental monitoring and a variety of clean utility samples using aseptic technique and in compliance with established procedures and regulatory requirements. Must be capable of maintaining laboratory documentation associated with testing and investigations in areas of assigned responsibility. Must analyze, evaluate, and interpret data, notifying clients of results and assisting to resolve issues, if applicable. Identify and report any discrepancies from normal procedures or practices. Maintains a level of technical knowledge and understanding in the assigned area of responsibility, including use of equipment and instrumentation and is able to troubleshoot problems, if they occur. Support the implementation of new methods and equipment/instrumentation by performing required testing in support of validations, qualifications, or suitability testing. Must update and write new procedures, protocols, and reports, as requested. This position is a team-based position that requires rotating shift work, weekends, holidays and overtime. Quals-- Knowledge of aseptic technique, environmental monitoring, and microbiological Quality Control testing and procedures preferred. Has excellent manual dexterity and aseptic technique. Has ability to complete sampling or testing assignments in a timely and compliant manner, with minimal supervision. Perform limited interpretation of data. Demonstrate ability to handle multiple assignments simultaneously and complete assignments in a timely and compliant manner, with minimal supervision. Knowledge of cGMPs and compendia testing required. Must have effective verbal and written communication skills. If hired, you will enjoy the following Eclaro Benefits: • 401k Retirement Savings Plan administered by Merrill Lynch, • Commuter Check Pretax Commuter Benefits, • Eligibility to purchase Medical, Dental & Vision Insurance through Eclaro If you feel you are qualified with the required skills and if you are interested, please free to send your word version most updated resume TAILORED to the job description above to or call (212)804-7476. Equal Opportunity Employer: Eclaro values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

Position Title: Service Technician II Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • Well make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer.Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reportsanycontraventionoflegislationorcompanypolicy, procedureorprogramtodirectsupervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Usesandmaintainsappropriatepersonalprotectiveequipment(PPE) asprescribedbycompanyprogram(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Providesinputondevelopingsafety initiatives and plans toeliminateexposuresthatcouldcauseaccidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 2+ years experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid drivers license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

Position Title: Service Technician II Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • Well make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer.Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reportsanycontraventionoflegislationorcompanypolicy, procedureorprogramtodirectsupervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Usesandmaintainsappropriatepersonalprotectiveequipment(PPE) asprescribedbycompanyprogram(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Providesinputondevelopingsafety initiatives and plans toeliminateexposuresthatcouldcauseaccidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 2+ years experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid drivers license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

Job DescriptionDescription: Are you an experienced survey professional looking to advance your career as a Survey Crew Leader in land surveying? Fisher Associates is hiring a Survey Party Chief in the Canonsburg, PA area to lead field survey crews with a strong focus on safety, precision, and project efficiency. In this leadership role, you’ll oversee on-site land survey operations, mentor team members, and ensure timely, accurate, and high-quality survey deliverables across various projects. At Fisher Associates, your surveying expertise is recognized, your professional development is supported, and your work-life balance is truly valued. Whether you're conducting boundary surveys, construction staking, or topographic mapping, you'll play a key role in shaping successful project outcomes and advancing your career. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You excel in the field, leading crews and solving challenges outdoors — your expertise drives results where it matters most., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others. As a Survey Party Chief, you’ll take the lead on-site—guiding field crews, ensuring safety, and collecting accurate land survey data that supports successful project delivery. Your work will combine leadership, technical precision, and real-time problem-solving in dynamic outdoor environments. • Ensure survey crew safety through hands-on training, daily Tailgate Safety Meetings, and enforcement of Job Safety Analyses (JSAs)., • Lead and mentor field survey staff, fostering high performance and continuous skill development., • Maintain organized field notes, sketches, and survey control documentation aligned with project standards and regulatory requirements., • Collect, verify, and process survey field data using proper naming conventions to ensure clean transitions to office teams., • Coordinate daily with Project Managers and Land Surveyors to set project goals, track survey progress, and quickly resolve field challenges., • Follow client and company field protocols to guarantee survey data accuracy across a wide range of specifications and project types., • Perform control checks, traverse angle closures, and level run validations before submitting data for processing., • Track and document crew timesheets, vehicle use, and equipment condition to optimize daily operations. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Requirements: What You Bring, Your Expertise • High School Diploma or GED required, • Associate’s Degree of applied Science in Surveying, Geomatics or related degree preferred (or equivalent experience), • 3 plus years of experience as a Party Chief, • Experience with data collection survey equipment including Leica GPS, Scanning and Total Station systems highly preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift to 50 pounds at a time., • Must possess a valid driver’s license and drive a company vehicle., • Traveling on a regular basis to project sites located throughout Pennsylvania and New York., • Ability to sit, stand, walk and transverse uneven grounds Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description Job Summary: The Insurance Customer Service Rep is the insurance agencies’ front-line contact with the public and must represent the agency in a professional and friendly manner at all times. They will act as a receptionist, accept payments, and provide customer service and support to the Licensed Producers. Essential Job Duties and Responsibilities: (Additional duties as assigned) • Answer incoming calls promptly and professionally., • Communicate with callers in a professional, friendly and efficient manner, striving to minimize the time they are put on hold., • Take thorough messages, indicating caller’s first and last name, company name if applicable, the time, and the message the caller wishes to leave., • Communicate messages to the appropriate parties in a timely manner., • Receive cash, checks, and credit card payments from customers and accurately record the amount received and process with the respective carrier., • Make change, accept a check or credit card payment and issue receipts to customers., • Refer customers who have additional questions to respective team member., • Handle customer complaints with poise and integrity. Refer the customers to the appropriate manager for further communication., • Prepare outgoing mail for postal service delivery., • Pick up mail daily and time stamp and distribute accordingly., • Perform clerical duties such as typing, filing, etc., as needed., • It is your responsibility to support and endorse agency policies and procedures as set forth by our group., • Strong interpersonal and communications skills, • Ability to prioritize and organize work in a multitasked environment., • Must have the ability to act and perform exemplary work independently., • Attention to detail., • Ability to work productively in a fast paced, stressful environment., • Exerts up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Work is performed in an office setting., • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description Overview: Are you ready to begin your journey towards a rewarding career in the environmental field? Does protecting the environment and gaining hands-on experience as an Environmental Field-Testing Technician interest you? Apply today! You'll get great hands-on experience, travel to exciting customer locations within your region (with expenses covered), and enjoy the great outdoors! This is a great opportunity in a recession-proof industry where the sky is the limit! As an Environmental Field-Testing Technician, you will have the opportunity to learn and advance within our rapidly growing company while simultaneously obtaining an education on the industrial processes that we serve. Benefits to the Environmental Field-Testing Technician role include a clear and progressive career path, upward mobility, PTO, and great benefits that kick in the month following your start date. Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers’ environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically-minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Starting pay rate is $20-$22 per hour, with generous quarterly profit-sharing bonuses and plenty of overtime available, the annual salary is estimated to be up to $48K in first year. In addition, you’ll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: • Conduct on-site field testing in a professional manner and transport testing equipment to customer sites, • Follow all test methods, procedures, and processes for quality source testing, • Must have a valid driver’s license, • Enjoy being outdoors, working safely in all weather conditions, • Ability and desire to climb stairs and ladders and work at elevated heights, • Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred, • Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred, • Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products, • Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Key Benefits Include: • Medical, Dental, and Vision Insurance, • Flexible Spending Accounts, • 401(K) Plan with Competitive Match, • Continuing Education and Tuition Assistance, • Employer-Sponsored Disability Benefits, • Life Insurance, • Employee Assistance Program (EAP), • Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st), • Profit Sharing or Individual Bonus Programs, • Referral Program, • Per Diem & Paid Travel Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Job DescriptionDescription: Are you a skilled surveyor with a passion for precision and a knack for problem-solving? Fisher Associates is seeking a dynamic Project Surveyor to join our team! In this role, you’ll be at the heart of our projects, ensuring that our land surveying services are not only accurate but also aligned with our high standards. You’ll play a vital role in bridging the gap between different disciplines within our project teams, ensuring that every project runs smoothly from start to finish. If you’re ready to make a big impact on exciting and diverse projects, we want to hear from you! Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. We are headquartered in Rochester NY, with eight offices throughout NY, PA and TX. Why a Career with Fisher Associates? • Be Heard, Be Valued: Our leadership team is accessible and welcomes your feedback and ideas., • There is No “I” in Team: Every team member matters and contributes to our success by owning their role on the team. Contribute your creative ideas and expertise to our exceptional groups., • Transparency Matters: We keep you informed with frequent communications and quarterly financial reviews., • Long-Term Client Relationships: Our goal is to build long-lasting client relationships while delivering high-quality solutions., • Community Service: We are passionate about giving back and creating a legacy of service that improves equity, access, dignity and joy for members of our diverse communities., • Work on Local Projects: Experience the positive change you create in our own community., • Diverse Project Opportunities: The diverse comprehensive services we offer translate into challenging and engaging learning & growth opportunities., • Growth is Your Journey: Advance your career with clearly defined career paths, tuition assistance and ongoing training to support your professional goals. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. The primary function of this role is responsible for, but not limited to, the following: • Supervises survey technicians, field crews, and CADD technicians on the project team., • Performs routine and complex survey calculations and control adjustments., • Performs, assigns, or assists with records research., • Performs, assigns, or assists with CADD drafting assignments., • Analyzes boundary evidence and parcel/ROW records to determine property boundaries and Rights of Way., • Determines and documents property boundaries, easements, and land ownership details to ensure compliance with legal regulations., • Creates detailed topographic maps and surveys to provide essential data for project planning and design., • Maintains positive client relationships, understanding project requirements, and facilitating all deliverables to ensure an outstanding customer experience using Clientship Philosophy., • Provides QA/QC on survey work completed for all sectors., • Associate or Bachelor's degree in surveying, geomatics, civil engineering, or a related field., • Experience in surveying software and equipment, including AutoCAD, GPS, total stations, and data collectors., • Previous experience in land surveying, • Must be knowledgeable in all aspects of Land Surveying, including boundary determinations, control adjustments, topographic surveying/mapping, NYSDOT Standards and Procedures, and ALTA requirements., • Proficiency in AutoCAD Civil 3D and MicroStation preferred., • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Aspire to excellence, consistently seek to improve, and demonstrate high-quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients, and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy. Ability to identify and handle priority and/or sensitive issues with discretion and a commitment to confidentiality., • Proactive, results-oriented, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent organizational, project management and time management skills, • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand and walk for long periods of time and distance., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 50 pounds at a time., • Traveling on an occasional basis to project sites located throughout New York, • Must be able to access and navigate construction sites and job areas, • Ability to transverse uneven grounds Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Field Service Workers are responsible for working alongside our drilling crew to successfully complete drilling operations. As a result, a Field Worker must be physically able to follow instructions from superiors in a safe and timely manner, as well as be able to perform the following essential duties and responsibilities. Requirements: Parratt-Wolff, Inc., a Geotechnical and Environmental drilling firm with offices in Central NY, PA and NC is seeking hard-working laborers and drillers ready to jumpstart a CAREER in the drilling industry. Join our rapidly expanding 100% employee-owned company as a Driller or Field Service Worker and receive on the job training in a position with a career track. We offer an experience-based sign on bonus and very competitive wages and benefits. Expected Hours of Work: Stable year-round work regularly offers 40 hours with frequent overtime opportunities. CAREER OPPORTUNITY IN THE DRILLING FIELD: Parratt-Wolff, Inc. has an established career path to ensure your success. We will train qualified applicants who are dependable, hardworking and willing to learn. A construction background or mechanical background is helpful, but not mandatory. Responsibilities and Duties • Work alongside licensed drillers to support all aspects of drilling operations., • Indoor and outdoor work in all weather conditions, • Work with and around heavy machinery, • Loud conditions, • Physically demanding, • $18-32 /hr. depending on experience, • $1,000 - $2,000 sign on bonus depending on experience, • We will help train you obtain your CDL A or B license., • Health Insurance (Physical, Dental, Vision and Aflac), • Health Savings Account and Flex Spending, • Retirement Program – Employee Stock Ownership Plan & 401K, • Per Diem Program, • Company paid Hotel Rooms When on Travel, • Tools and Equipment Provided (Including all PPE), • Must have valid Drivers' license and clean driving record., • Must have reliable transportation., • Candidate must be able to lift over 50 pounds., • CDL A or B and OSHA Hazwoper Training is a plus., • Pre-employment background check, physical and drug screen required This position requires travel Monday through Friday with some opportunity for weekend work. Parratt-Wolff is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability or any other protected characteristic. Parratt-Wolff will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business.

Job DescriptionDescription: Project Manager – Precast Transportation and Underground Structures Design | Civil Engineering Lead Precast Projects That Move Communities Forward Are you a skilled Civil Engineering Project Manager with experience in precast concrete design for transportation infrastructure and underground structures projects? Fisher Associates is seeking a Project Manager to lead precast projects from concept through completion. In this role, you'll manage client relationships, guide multidisciplinary teams, and ensure the quality and accuracy of precast design deliverables. You'll be part of a collaborative, people-first culture where your leadership drives results and your growth is supported. At Fisher, your voice matters and your work makes an impact. Apply today to lead meaningful projects and bring innovative transportation solutions to life. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation and underground structures precast design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 8+ years transportation experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Precast project management experience, • Professional Engineering License (PE) preferred or ability to obtain it, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Proficiency in AutoCAD & RISA 3D, • Proven Client relationship and business development experience, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description We are currently seeking a Program Manager for our growing Ecological Construction & Restoration Program in New York State. The successful candidate must have experience managing ecological construction projects such as wetland construction/rehabilitation, stream and shoreline restoration, invasive species control, habitat creation/restoration, native planting and seeding, and green infrastructure projects. This is an opportunity to take a fledgling program and expand it in scope and geography to assist our partners in building hazard resiliency and aid in environmental restoration and conservation. We are looking for someone who is experienced, mission-driven and excited to develop and implement a vision with our team. This position may be based out of our Rochester, Buffalo, Syracuse, or Ballston Spa offices. Duties • Oversee ecological construction operations throughout the Northeastern US with current focus in New York State., • Estimating and proposal preparation., • Business development activities including but not limited to attending conferences, networking events and other tasks designed to grow this business sector., • Project management, including tracking project budgets, client interaction, scheduling staff and equipment, reviewing deliverables, interacting with agency representatives, etc., • Supervision and mentoring of junior staff., • Establishing and maintaining relationships with public agencies, regulators, private developers, consulting and engineering firms and non-profits to further business development goals., • A Bachelor’s degree in environmental science, natural resources, ecology, geography or related field., • Experience: 12-20 years of experience with a minimum of 10 years progressive experience in the industry., • Strong written and verbal communication skills., • Well versed in relevant NY State and Federal regulations., • Experience leading and mentoring junior staff., • Demonstrated ability to pursue, establish and maintain client business relationships. Preferred Qualifications: • OSHA 30 Hour Construction Safety Training., • Certified Ecological Restoration Practitioner (CERP) or Professional Wetland Scientist (PWS) certification a plus. Salary Range: $90,000 - $135,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required. Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Frazer and Jones are looking to add Core Machine Operators to our foundry operations to support the business. This role works interpedently to support the daily functions for foundry production. Under the direction of the foundry foreman and/or manager, carries out repetitive operations creating and adjusting cores for the specific manufactured goods. Job Essential Functions: • Interprets and adjusts core machine pressure, temperature and timer indicators and makes adjustments to specified settings., • Makes minor repairs and adjustments, using simple measuring instruments such as a straight edge, level, measuring tape, rulers or calipers for core boxes., • Sets up and runs various core machines and changes core boxes, completes core tryouts, fills core trays and cleans cores., • Operates a fork truck to bring patterns and core machine materials throughout the plant., • Throughout the shift will drill, tap, ream and coin castings., • Evaluates thread and ream inspection during process., • Disposes of scape castings at workstation and performs housekeeping tasks such as cleaning area and core boxes., • Manually feeds materials through punch press, drilling or tapping machines., • Other duties as assigned by the foreman and/or manager. Education: High school diploma or GED, or the ability to understand fundamental English. Must be able to handle mathematical operations such as multiplication, division, converting fractions to whole numbers or decimals. Working Hours and Conditions: • 2nd Shift: Monday through Friday 2:00 PM through 10:30 PM., • The individual will need to train on the first few weeks on 1st Shift (Mon – Fri, 6 AM to 2:30 PM), • 8-hour shift assigned, may be assigned overtime via extension of shift or additional shifts., • Works in-person, this position cannot be done remotely., • Works in a foundry setting, may be exposed to environmental conditions such as varying temperatures from hot to cold and irritants such as dust, sand, etc. Pay and Benefits: • $18.08 - $20.82 per hour., • 2nd Shift receives $0.45 per hour differential., • Overtime after 8 hours in a day and after 40 hours in a week., • Medical, Dental and Vision insurance available the first of the month after hire., • Company paid short-term disability and life insurance., • 401k with 3% company match available upon hire., • Union membership.

Job DescriptionDescription: Operate fabricating machinery and fabricate a variety of flat and irregular shaped parts for various product lines. BENEFITS: • Health Insurance, • Life Insurance, • 40 Hours PTO, • 40 hours Sick Time, • 11 Paid Holidays, • 401K, • 401K Matching, • Up to $700 reimbursement for dental and vision claims for employee. ESSENTIAL JOB FUNCTIONS: • Operate various size and types of sheet metal fabricating machinery such as shears, press brakes, punch presses, etc., • Fabricate a variety of flat and irregular shaped parts for various product lines., • Remove burrs, sharp corners, etc. from processed parts., • Using hand truck, Lift truck, or overhead crane to move materials, parts, tools, etc. to and from storage, staging areas, or workstation., • Obtain first piece inspection., • Read and interpret measuring devices., • Perform daily lift truck inspections., • Obtain first piece inspection approval and periodically visually inspect and / or gauge work for quality appearance and dimensional accuracy., • Follow quality control standards to ensure meeting quality and quantity requirements., • To maintain continuous movement of work, use a hand truck, lift truck, or overhead crane to move work to and from designated storage, staging areas, or workstation., • Make minor adjustments to machine settings and perform general equipment inspection., • Adhere to established safety rules and policies., • Notify Supervisor or Safety Director of any unsafe acts or practice stopped., • Meet quality and production standards., • Keep work area neat and orderly on a daily basis., • Keep Supervisor fully informed of any problems., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Forklift certification required., • Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Basic math skills., • Basic organizational skills. This position has no direct reports. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will work with sheet metal, plastic and aluminum, stainless steel, copper, orders, parts and drawings, using a variety of tools, including shears, press brakes, punch presses, hand truck, Lift Truck, overhead crane, disc sanders, belt sanders, hand tools, micrometers and gages, and a variety of power tools and hand tools. PHYSICAL ACTIVITIES AND DEMANDS: Light Work: Exerting up to 50+ pounds of force rarely and/or up to 11-50 pounds of force occasionally and/or 10 pounds of force frequently to move objects and run machines. MENTAL AND VISUAL DEMAND: Close mental and visual attention required to perform work dealing primarily with creating and analyzing drawings and data, performing technical work using a computer terminal and appropriate software programs. ENVIRONMENTAL CONDITIONS: Production Environment: Manufacturing environment where the employee may encounter directly or indirectly chemicals, chemical processes, machinery, transport equipment and plastic working, handling and melting environments. Safety Equipment: Must wear safety glasses with side shields, safety shoes and other required PPE in accordance with working tasks. PPE includes but is not limited to : gloves, hearing protection, work clothes and apron. EMPLOYER'S DISCLAIMER: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionSalary: $31.46-$34.48 Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Job Summary The Operator will be a key member of the Companys Operations team, reporting directly to the Operations and Maintenance Manager. The group operates under a flat structure, and the successful candidate will have regular visibility and direct access to the Director of Operations. The successful candidate will be a critical member of the team, ensuring the successful execution of providing our customers with steam and chilled water on a 24/7/365 basis. Operators work 12-hour shifts alternating every two weeks between days and nights and include weekends. The successful candidate will be expected to work well as part of a team, be a self-starter that enjoys working in a fast-paced environment, have strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior knowledge of steam and chilled water systems. Core Responsibilities • The Operator will perform all duties as assigned - Operates, maintains, and troubleshoots equipment of a steam and chiller plant and the distribution systems, • Works with management and peers to Identify and scope out opportunities to maximize production, minimize operating costs and eliminate downtime, • Maintains proper documentation, including operating logs, maintenance records and safety & environmental reports, • Keeps Manager, control room and other operators and peers are fully informed of unusual plant conditions and current job progress as the job relates to facility operations when assigned on-shift and transitioning shift., • Commitment to following all applicable company and client policies, procedures and work rules, and modeling appropriate actions and behaviors, • Participates in training on operating policies and procedures, • Performs chemical tests on boilers, condensate and cooling water and adjust to designated test levels, • Regenerate softeners, • Work in confined spaces, such as boilers, vaults and work from ladders, scaffolds, catwalks, etc., • Transferring chemicals into storage tanks, • Monitors the plant control system via computer screens and equipment gauges, • Perform continuous improvements on the appearance of the plant facility including snow removal as needed., • Additional duties include, but are not necessarily limited to starting and stopping plant equipment as needed; diagnosing and correcting problems in equipment and auxiliaries; changing oil, lubricating bearings and filling station logs, receiving deliveries Working Style to Be Successful in This Role: • Highly analytical with a keen attention to detail, • Demonstrates exceptional initiative and execution skills, • Strong oral and written communication abilities, • Collaborative with excellent interpersonal skills, • Capable of developing and maintaining positive relationships internally and externally, • Adapts quickly in a dynamic, complex, and fast-paced environment, managing changing priorities effectively, • Delivers high-quality work with speed and accuracy, • Self-motivated and proactive, able to work independently with minimal supervision Professional Experience & Knowledge: • Undergraduate degree with relevant technical discipline with 1 year of experience in operating and/or maintaining of combined or simple cycle power plant or other heavy industrial energy plant or High School Diploma with 3 years plant experience, • Individuals having served in the United States Navy for a period of 4 (four) or more years as a boiler technician, machinist's mates, or engineering lab technicians will be considered eligible by the company for a Shift Operator position., • Knowledge of the purpose and function of electronic and pneumatic control panels, and ability to read and interpret charts, tables, measuring equipment, and gauges are required, • Highly analytical with great attention to detail, • Collaborative and interpersonal skills, • A process-focused individual with a passion to drive and deliver effective change, • Self-motivated and proactive, with respect to both managing workload and professional development, • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities Physical Requirements: • Must be able to work in tight spaces and elevated positions: twisting, turning, bending, and holding arms at / above the head are all common movements; able to lift up to 50lbs., • Requires sitting at computer screens for long periods of time, • Capable of operating heavy equipment such as a forklift and variety of hand and power tools, • Must be able to clearly see and differentiate all colors, • Must be able to maintain standard threshold of hearing to safely perform job duties, • Must have good eyesight, hearing and manual dexterity, • Wear all types of PPE including hearing protection, eye protection, all types of hand protection, steel toe foot wear, head protection, wear fall-protection, half-face and full-face respirators Conditions of Employment: • Valid New York State Drivers License, • Only authorized employees are permitted to use company vehicles, this includes Industrial trucks (forklifts, scissor lifts, etc.) and electric vehicles/golf carts. To be an authorized employee, you must be at least 21 years old, hold a current valid State Drivers' license and demonstrate a clean driving record. The driver must be on an approved list for company insurance purposes. Your driving record will be screened as part of the pre-employment process and annually in December., • All certifications/licenses must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN, and TEXAS) Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High-Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflects the multicultural nature of the nation and our world and brings unique strengths and abilities which contribute to CenTrio.

Provides advice and counsel to product and process engineers and leads to incorporate environmental health and safety principles and concepts to prevent workplace, operational hazards and environmental impacts. Organize and control the EH&S functions of the site(s) to ensure that an effective accide

As an Environmental Specialist II - Plan and execute Phase I and II Environmental Site Assessments (ES - As), due diligence investigations, and environmental compliance audits in accordance with ASTM standards. Design and implement site remediation p Environmental Specialist, Environmental, Speciali

As a Environmental Services Technician, you will be responsible for managing waste collection and recycling efforts, including: collect and dispose of waste materials.

Are you an Environmental Specialist, Environmental Scientist, or Environmental Engineer looking to take your career to the next level with hands-on, impactful work? Fisher Associates is seeking anEnvironmental Specialist IIto join our mission-driven team dedicated to environmental consulting, site a

Familiar with Federal, State, and local Environmental Health & Safety regulations. Environmental Health and Safety. Assist with enforcement and adherence of company, Environmental Health & Safety, and risk management policies and procedures on construction project.