Trabajos grading en Edison, New JerseyCrear alertas

Job DescriptionJob Title: Construction Laborer Reports To: Site Supervisor / Foreman Location: East Brunswick, NJ Pay: $20-$28 an hour Position Summary The Construction Laborer is responsible for assisting with the safe dismantling, removal, and disposal of solar farm components during decommissioning projects. This role involves manual labor, equipment operation assistance, site cleanup, material handling, and adherence to all safety and environmental regulations. The ideal candidate is dependable, safety-conscious, and capable of performing physically demanding work in outdoor environments. Essential Responsibilities • Assist with the removal and dismantling of solar panels, racking systems, electrical components, fencing, and related infrastructure., • Safely handle, sort, load, and transport solar farm materials for recycling, salvage, or disposal., • Operate hand tools, power tools, and construction equipment under supervision., • Assist equipment operators during excavation, post extraction, and site restoration activities., • Perform site cleanup and maintain a safe, organized work area., • Follow all company safety policies, OSHA regulations, and environmental requirements., • Identify and report damaged equipment, safety hazards, and project concerns to supervisors., • Load and unload materials, tools, and equipment from trucks and trailers., • Participate in daily safety meetings and toolbox talks., • Support erosion control, grading, seeding, and land restoration activities as needed., • Work collaboratively with crew members to meet project deadlines and productivity goals.Qualifications, • Previous construction, demolition, solar, or general labor experience preferred., • Ability to safely use hand tools and power tools., • Basic understanding of construction site safety practices., • Ability to follow verbal and written instructions., • Valid driver's license preferred., • OSHA 10 certification preferred but not required.Physical Requirements, • Ability to lift and carry up to 50 pounds regularly and heavier loads with assistance., • Ability to stand, walk, bend, kneel, climb, and perform repetitive physical tasks throughout the workday., • Ability to work outdoors in varying weather conditions, including heat, cold, wind, and rain., • Comfortable working on uneven terrain and construction sites.Working Conditions, • Primarily outdoor work at active solar farm decommissioning sites., • May require overtime, weekends, and travel depending on project needs., • Exposure to construction equipment, dust, noise, and changing weather conditions. APPLY TODAY!! Job Type & Location This is a Contract to Hire position based out of East Brunswick, NJ. Pay and Benefits The pay range for this position is $20.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Brunswick,NJ. Application Deadline This position is anticipated to close on Jul 15, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Summary: Immediate Opening for a Civil Engineer to work in our Warren, NJ office location. Work Experience • 5+ years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Estimated salary range for this position is $90,000 to $150,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Licenses and Certifications • Professional Engineer (P.E.) license required, or ability to obtain within 1-year of hire., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include: stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. Employee Benefits We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include: • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program., • Workers Compensation. Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR tXi1P1LtEo

Job Description Job Title: Heavy Equipment Operator (Dozer / Excavator / Loader) Job Description The Heavy Equipment Operator safely and efficiently operates dozers, excavators, and loaders to perform sitework, grading, excavation, trenching, backfilling, and material handling on civil, environmental, and site development projects. This role supports field operations by maintaining high standards of productivity, precision, and safety while working across various project sites. Responsibilities • Operate dozers, excavators, and loaders in accordance with project specifications, company procedures, and safety regulations., • Perform site preparation, excavation, grading, trenching, backfilling, and material loading to meet required tolerances and project requirements., • Interpret and follow grade stakes, site plans, construction drawings, and instructions from supervisors to achieve accurate grades and slopes., • Conduct daily pre-start inspections of heavy equipment, complete required checklists, and ensure machines remain in proper working condition., • Maintain equipment cleanliness, monitor fluid levels, and promptly report maintenance needs, malfunctions, or mechanical issues., • Load, move, and distribute earth, rock, aggregates, debris, and other materials efficiently while minimizing waste and preventing contamination., • Perform fine grading and maintain proper drainage, compaction, and subgrade standards as directed by project specifications., • Support the crew with general labor tasks when equipment is not in use, including site cleanup and material handling., • Communicate clearly with the project team, site supervisors, and signal personnel to coordinate safe and efficient operations. Essential Skills • Minimum 2–3 years of experience operating heavy equipment, including dozers, excavators, and loaders, in civil or sitework construction., • Proficiency operating excavator, loader, and dozer equipment in field conditions., • Ability to read and interpret construction drawings, site plans, and grade stakes., • Proficiency using lasers for pipe leveling and grade control., • Valid driver’s license., • Strong safety awareness and consistent adherence to OSHA and company safety protocols., • High attention to detail, especially in grading, excavation, and material handling tasks. Additional Skills & Qualifications • CDL is preferred but not required., • OSHA 10 or OSHA 30 certification is preferred., • Experience with GPS grade control systems is a plus. Work Environment This role is based in the field at various project sites, working closely with the on-site management team and crew members. You operate heavy construction equipment such as dozers, excavators, and loaders, and may support crushing, screening, and recycling operations. The schedule is full-time, with the possibility of overtime and weekend work depending on project demands. You work outdoors in a range of weather conditions, including heat, cold, rain, and on uneven or rough terrain. Job Type & Location This is a Contract to Hire position based out of East Brunswick, NJ. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Brunswick,NJ. Application Deadline This position is anticipated to close on Jul 11, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Summary We are currently representing a reputable civil engineering firm specializing in transportation infrastructure projects throughout the Northeast. With a growing backlog of bridge and roadway design work, the team is seeking a Senior CAD Designer with 5+ years of experience in MicroStation, InRoads, and AutoCAD to support civil and structural design teams. The ideal candidate will have experience working in a civil/highway/transportation setting and be capable of producing detailed construction drawings with minimal oversight. Key Responsibilities Support civil and bridge design teams in producing accurate CAD drawings for public infrastructure projects Use MicroStation, InRoads, and AutoCAD to develop detailed plans, profiles, and sections Work on a variety of civil scopes including site planning, roadway layout, grading, utilities, and stormwater systems Assist with drafting for structural/bridge engineering including new bridge design, culverts, rehabilitation, and land rating Incorporate redlines and feedback from engineers into drawing sets and ensure adherence to CAD standards Develop traffic control plans, utility relocation layouts, and construction support documentation Contribute to BIM/Revit models and support 3D rendering/visualization where needed Maintain drawing version control and collaborate with multi-disciplinary teams to meet submittal deadlines Help mentor junior CAD staff and assist in implementing drafting best practices Projects May Include: Roadway & Highway Design Site Design & Permitting Utility Design & Relocation Traffic Control & Streetscape Plans Stormwater & Hydraulic Studies New Bridge Construction & Bridge Rehab Culvert Design and Land Rating Cost Estimating & Specifications Qualifications 5+ years of professional CAD design/drafting experience in civil, bridge, or transportation projects Proficiency with MicroStation, InRoads, and AutoCAD (Revit and 3D CAD a plus) Prior experience supporting engineers on civil site or DOT transportation projects Familiarity with NJDOT, NYSDOT, or other public agency CAD standards preferred Ability to work independently and communicate effectively with engineers and project managers Strong attention to detail, organization, and time management Associate degree or technical certification in drafting, CAD, or a related field preferred Compensation & Benefits Competitive base salary (commensurate with experience) Full medical, dental, and vision coverage 401(k) plan with company match Paid vacation, sick time, and holidays Career development and training support Hybrid work schedule (3 days in office, 2 days remote)

Job Description Job Title: Civil Engineer Job Description This Civil Engineer role focuses on designing and reviewing a wide range of site and civil projects, including stormwater management, detention basins, land development, and infrastructure rehabilitation. You will prepare technical reports and permit applications, ensure development plans comply with local ordinances, and support permitting efforts with state and local agencies. The position also offers the opportunity to mentor junior engineers and contribute to a collaborative, multidisciplinary team in a growing, established firm. Responsibilities • Design stormwater management systems, including detention basins and related drainage infrastructure, for municipal and land development projects., • Plan and design infrastructure rehabilitation projects, ensuring compliance with applicable engineering standards and best practices., • Prepare detailed technical reports that clearly present design assumptions, calculations, findings, and recommendations., • Prepare and submit complete and accurate permit applications to state and local agencies, including NJDEP and NJDOT., • Review subdivision plans and utility plans submitted by developers for approval, ensuring they meet engineering standards and regulatory requirements., • Review development plans for conformance with local ordinances, including subdivision and land development regulations., • Perform drafting, design, and engineering calculations for site and civil projects, including grading and layout of site plans., • Develop and assemble complete drawing sets, ensuring all design details, notes, and references are accurate and coordinated., • Use Civil 3D to create and modify models, drawings, and design documents for municipal and land development projects., • Collaborate with internal team members across multiple disciplines to coordinate designs and resolve technical issues., • Mentor and review the work of junior engineers, providing guidance, feedback, and quality control on their designs and calculations., • Support project delivery by managing priorities, meeting deadlines, and communicating progress and issues to the project team. Essential Skills • Extensive experience in the engineering industry, with approximately 15 years of relevant civil engineering experience., • in civil engineering design, including site and land development projects., • Proficiency with Civil 3D for use on municipal and land development projects in New Jersey., • Demonstrated experience in stormwater design, including drainage systems and detention basins., • Experience with grading design and preparation of grading plans for site and civil projects., • Ability to prepare and review technical reports, design calculations, and engineering documentation., • Experience reviewing subdivision and utility plans for compliance with local ordinances and engineering standards., • Knowledge of subdivision and land development regulations and their application to development projects., • Experience preparing permit applications and supporting documentation for NJDEP and NJDOT., • Professional Engineer (PE) credential or strong experience working at a professional engineer level., • Ability to mentor and review the work of junior engineers, providing technical oversight and guidance., • Strong written and verbal communication skills for coordination with internal teams and external stakeholders., • High attention to detail and strong organizational skills to manage multiple projects and deadlines. Additional Skills & Qualifications • Experience working on municipal projects and land development projects within New Jersey., • Familiarity with local permitting processes and coordination with state and local agencies., • Experience in a multidisciplinary engineering environment, collaborating with multiple divisions or specialties., • Ability to contribute to a team-focused culture and participate in a collaborative approach to project delivery., • Interest in contributing to the growth and evolution of an established engineering practice undergoing expansion. Work Environment This role offers a hybrid work arrangement, with two days working from home and three days in the office each week. You will join a multidisciplinary team of approximately 14 people across three divisions, providing a close-knit, collaborative environment with direct interaction across disciplines. The firm has been in business for over 20 years and maintains a strong base of repeat clients, offering stability and a consistent workload. The organization emphasizes a team-oriented culture, treating growth and change as a shared effort rather than a top-down directive. Benefits include medical, dental, and vision coverage, a 401(k) plan with a 3% match after a 90-day introductory period, eight paid holidays, and up to three weeks of paid time off depending on tenure. The company also offers end-of-year bonuses based on both company and individual performance, as well as company outings that support team cohesion and a positive workplace atmosphere. Job Type & Location This is a Permanent position based out of Edison, NJ. Pay and Benefits The pay range for this position is $120000.00 - $150000.00/yr. Med, dental, and vision with a 3% match on 401K (90 day intro period) 8 Holidays and PTO is up to 3 weeks pending the tenure of the employee Been in business for 20 plus years and has a quality base of repeat customers. 14 people currently over 3 division (multidisciplinary) company outings Workplace Type This is a hybrid position in Edison,NJ. Application Deadline This position is anticipated to close on Jun 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSummary:We are representing a well-established, multi-discipline civil engineering and surveying firm seeking a Senior Civil CAD Drafter with strong land development experience to support site development projects across the greater Central New Jersey region. This role is ideal for an experienced Civil 3D professional who enjoys detailed production work and wants to contribute to a steady pipeline of commercial, residential, and mixed-use developments.This position plays a key role in translating engineering concepts into high-quality construction documents, supporting Project Engineers and leadership across grading, utilities, and site layout design. The ideal candidate brings deep Civil 3D expertise, strong attention to detail, and a collaborative mindset within a fast-moving design environment.Key Responsibilities:Prepare detailed civil site plans for land development projects using AutoCAD Civil 3DDevelop grading, drainage, and erosion control plansProduce utility layouts including sanitary, storm, and water systemsCreate plan and profile sheets, cross sections, and construction detailsCoordinate drawings with survey, environmental, and engineering teamsApply municipal and agency CAD standards across multiple jurisdictionsImplement redlines and revisions with strong quality control awarenessSupport multiple active projects while maintaining production deadlinesQualifications:8–10 years of CAD drafting experience with a strong focus on land developmentAdvanced proficiency in AutoCAD Civil 3DDemonstrated experience producing grading, drainage, and utility plansStrong understanding of civil site development standards and workflowsAbility to manage multiple deadlines in a production-driven environmentHighly detail-oriented with strong organizational skillsComfortable collaborating with engineers and multidisciplinary teamsExperience working within municipal design standards preferredCompensation + Benefits:Competitive salary aligned with senior Civil 3D market rates ($75K–$95K typical range)Medical, dental, and vision coverage401(k) planPaid holidays and PTOLong-term stability within an established regional firmConsistent land development project pipeline

Job DescriptionDescriptionCME Associates is seeking a motivated Associate Professional Engineer to join our team in East Brunswick office, NJ. This role offers an exciting opportunity to contribute to Environmental Engineering projects, ensuring compliance with regulations and promoting sustainable practices. The ideal candidate will have a strong technical background in Civil/Environmental engineering, problem-solving skills, and a passion for environmental stewardship. Responsibilities • Strong design experience/capabilities with AutoCAD, • Site grading/Roadway design, • Drainage/Stormwater management design engineering experience a plus, • Assist with permitting and regulatory compliance, ensuring projects align with federal, state, and local environmental laws., • Prepare technical reports and feasibility studies for clients and regulatory agencies., • Perform field investigations, collect environmental data, and analyze data to develop engineering solutions. Qualifications • Education: Bachelor’s degree in Civil/Environmental Engineering., • Experience: 4+ years of experience., • Technical Skills: AutoCAD a must, MS Excel a must, Proficiency in GIS, and MicroStation is a plus., • Certifications: Professional Engineer (PE) licensure required BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Job Summary: Immediate Opening for a Project Manager/ Construction / Inspector to work in our Warren, New Jersey office location. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids, and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Estimated salary range for this position is $85,000 to $120,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Work Experience, • 4 years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Licenses and Certifications, • Professional Engineer (P.E.) license desired but not required., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR QClHUuS3ei

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As a Designer II - Civil, you will join our growing civil engineering team and contribute to a variety of civil design projects. The ideal candidate will work with moderate supervision to develop high-quality construction plans and technical exhibits using Civil 3D. This role involves applying civil design principles, coordinating with engineers and other disciplines, and supporting project execution from concept through final deliverables. You will be expected to take ownership of assigned design tasks, solve routine design challenges independently, and continue developing technical expertise across grading, drainage, stormwater, and site development projects. Job Responsibilities: • Utilize AutoCAD Civil 3D to produce engineered construction plans and sheet setups, including plan views, profiles, grading plans, drainage layouts, and construction details., • Apply civil design principles to support site grading, drainage design, erosion and sediment control, and stormwater management solutions for renewable energy projects., • Work closely with civil engineers to interpret design intent and translate it into accurate CAD drawings., • Coordinate with electrical and structural teams to support multidisciplinary project execution., • Apply internal and client drafting standards while maintaining quality control across project deliverables., • Evaluate routine design alternatives for constructability, code compliance, and site challenges., • Support project teams in meeting deadlines and delivering high-quality work with increasing independence., • Help improve CAD workflows, templates, and drafting consistency across projects.Position Requirements:, • An associate or technical degree in CAD, civil engineering technology, or a related field is required., • Two to four years of experience in civil design with proficiency in AutoCAD Civil 3D., • Working knowledge of civil design principles including grading, drainage, and stormwater management., • RENEWABLES experience, specifically solar design, is preferred., • Ability to work independently on assigned tasks while collaborating effectively with engineers and project teams., • Strong attention to detail, problem-solving ability, and commitment to quality., • Willingness to continue growing technical knowledge and project responsibility.Benefits:, • 401(k) + company match, • Health, dental, and vision insurance, • Life insurance, • Unlimited PTO, • Professional development assistance, • Bonus opportunities, • Supportive, growth-oriented team environment Ready to join us? If you’re passionate about clean energy design, precision engineering, and turning data into impact, we want to meet you! Join us in shaping the next generation of solar and battery storage projects—and help transform ANS into the name everyone in renewables knows. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSummary: We are representing a well-established, multi-discipline civil engineering and land surveying firm seeking a Civil Engineer to support land development projects across the greater Central New Jersey region. This role focuses heavily on site development design using Civil 3D and is ideal for engineers who enjoy hands-on production work across grading, drainage, utilities, and permitting workflows. The position supports private-sector commercial, residential, and mixed-use developments and offers strong exposure to full-cycle civil design. This is a strong opportunity for a technically driven engineer looking to grow within a stable regional firm known for long-standing municipal relationships and steady project flow. Key Responsibilities: Prepare civil engineering plans and construction documents using AutoCAD Civil 3D Perform site grading, drainage, and stormwater management design Develop utility layouts including sanitary sewer, storm systems, and water mains Support engineering calculations, reports, and permitting submissions Coordinate with survey teams and internal disciplines to ensure accurate plan integration Address municipal review comments and revise plans as needed Implement redlines and assist with internal quality control processes Support project delivery from concept through construction documentation Qualifications: 5+ years of civil engineering experience with a strong focus on land development Advanced AutoCAD Civil 3D proficiency in a production environment Experience with grading, drainage, and site layout design Familiarity with municipal permitting and agency review processes Bachelor’s degree in Civil Engineering required EIT preferred or actively pursuing PE licensure Strong technical communication and organizational skills Ability to manage multiple design tasks in a collaborative team environment Compensation + Benefits: Competitive salary aligned with Central NJ market expectations ($85K–$115K typical range) Medical, dental, and vision insurance 401(k) plan Paid holidays and PTO Long-term growth within a stable, regionally established engineering firm Hands-on mentorship and strong Civil 3D technical development

Job Description Summary We are currently representing a well-established civil engineering and infrastructure design firm seeking a Senior Civil Engineer with a minimum of 7+ years of experience in highway design, infrastructure improvements, and DOT projects. Based out of their Edison, NJ office, this individual will play a key leadership role in the planning, design, and delivery of transportation projects across New Jersey and the greater Northeast region. This position is ideal for someone with strong technical capabilities in roadway/highway engineering, a deep understanding of DOT standards (NJDOT/NYSDOT), and the ability to lead and coordinate cross-functional design teams. Key Responsibilities Lead and manage highway and roadway design projects for public sector clients (NJDOT, counties, municipalities, etc.) Prepare and review design plans, specifications, and cost estimates for infrastructure improvements Oversee preparation of horizontal and vertical alignments, grading, drainage systems, and utility relocation plans Manage project schedules, budgets, and client communications to ensure on-time delivery Coordinate with internal teams and subconsultants including CAD designers, traffic engineers, and permitting specialists Provide quality control for engineering documents and ensure compliance with agency standards Mentor junior engineers and support staff, including assigning tasks and overseeing technical development Support proposal development and business development efforts for highway/infrastructure pursuits Attend project meetings, site visits, and coordinate with DOT and municipal reviewers as needed Project Types Include: Highway and roadway rehabilitation Intersection improvements and traffic flow enhancements Site planning and civil infrastructure for public sector developments Streetscape and ADA compliance upgrades Utility coordination and relocation Stormwater and drainage systems Occasional bridge approach work or coordination with structural teams Qualifications Bachelor’s degree in Civil Engineering (Master’s preferred) 7+ years of experience in civil engineering focused on highway, infrastructure, and transportation projects EIT or PE license preferred (New York or New Jersey preferred or ability to obtain) Extensive knowledge of NJDOT, NYSDOT, or similar DOT agency standards and processes Proficient with civil design software including MicroStation, InRoads, AutoCAD Civil 3D Familiarity with stormwater, permitting, and utility relocation Strong leadership, coordination, and communication skills Experience mentoring and managing junior staff is a plus Compensation & Benefits Competitive salary based on experience Medical, dental, and vision insurance 401(k) with company match Paid holidays, vacation, and sick time Hybrid work schedule Career advancement and continuing education opportunities

Job Description Job Summary: The Equipment Operator is responsible for the safe and efficient operation of heavy machinery used in the installation, repair, and maintenance of sewer and water infrastructure. This role involves working closely with pipe crews and laborers to support excavation, trenching, backfilling, grading, and site restoration activities while ensuring compliance with safety standards and project specifications. Key Responsibilities: • Operate heavy equipment such as excavators, backhoes, loaders, skid steers, and compactors to support water and sewer line installation., • Excavate trenches with precision to proper line and grade while protecting existing underground utilities., • Load, move, and place materials such as soil, gravel, pipes, and structures safely and efficiently., • Perform daily equipment inspections, routine maintenance, and report any mechanical issues to supervisors., • Work closely with the pipe crew to ensure proper alignment and placement of sewer and water lines., • Adhere to OSHA, DOT, and company safety policies at all times, including proper shoring and trench safety., • Read and interpret site plans, blueprints, and grade stakes., • Maintain a clean and organized work area and equipment., • Assist with general labor duties on-site when not operating equipment., • Communicate effectively with team members, supervisors, and other site personnel to ensure safe and productive operations. Qualifications: • High school diploma or equivalent (GED) preferred., • Minimum 5 years of experience operating heavy equipment., • Valid driver’s license; CDL preferred but not required., • Heavy Equipment Operator certification or equivalent training preferred., • Strong knowledge of equipment safety regulations and operating procedures., • Ability to work in various weather conditions and lift up to 50 lbs., • Excellent communication and teamwork skills., • Ability to follow safety protocols and procedures in compliance with OSHA. Working Conditions: • Outdoor work environment with exposure to noise, dust, and heavy machinery., • Must be required to work extended hours, weekends, or night shifts depending on project schedule. Physical Requirements: • Ability to sit for long periods while operating equipment., • Manual dexterity and good hand-eye coordination., • Ability to climb in and out of large machinery safely.

Job DescriptionSummary We are representing a well-established civil engineering firm focused on transportation infrastructure projects across the Northeast. Due to a growing backlog of roadway and bridge work, they are seeking a Senior / CAD Designer with 5+ years of experience supporting civil and transportation design teams. This role is ideal for a CAD professional with a strong background in highway, roadway, and bridge projects who can produce detailed construction drawings with minimal oversight and work closely with engineers on DOT and public infrastructure projects. Key Responsibilities Support civil, roadway, and bridge design teams in producing construction-ready CAD drawings Develop detailed plans, profiles, sections, and details using MicroStation, InRoads, and AutoCAD Assist with civil site design including roadway layout, grading, utilities, drainage, and stormwater systems Support structural and bridge drafting for new bridges, rehabilitations, culverts, and land rating Incorporate engineer redlines and ensure drawings meet agency and internal CAD standards Prepare traffic control plans, utility relocation layouts, and construction support documents Maintain drawing organization, version control, and submittal deadlines Collaborate with multidisciplinary teams and assist in mentoring junior CAD staff Contribute to 3D modeling or visualization efforts as needed Project Exposure May Include Roadway and highway design Civil site design and permitting Utility design and relocations Traffic control and streetscape plans Stormwater and hydraulic systems Bridge design, rehabilitation, and culverts Public infrastructure and DOT projects Qualifications 5+ years of professional CAD drafting/design experience in civil, transportation, or bridge projects Strong proficiency in MicroStation, InRoads, and AutoCAD Experience supporting DOT or public agency projects preferred Familiarity with NJDOT, NYSDOT, or similar agency standards a plus Ability to work independently and communicate effectively with engineers and project managers Strong attention to detail, organization, and time management Associate degree or technical certification in CAD or drafting preferred Compensation & Benefits Medical, dental, and vision insurance 401(k) with company match Paid vacation, sick time, and holidays Career development and training support Hybrid schedule: 3 days in office, 2 days remote

Job DescriptionDescriptionMunicipal Engineer | EIT/PE Artheon is seeking talented professionals to join our growing team in support of diverse engineering and environmental projects. Whether your background is in civil engineering, environmental science, or infrastructure design, this is a great opportunity to contribute to meaningful work in a collaborative and innovative environment. About ArtheonArtheon is a trusted engineering and consulting firm offering services that rival large organizations while maintaining the personalized client relationships of a boutique firm. With expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. Position Overview We are seeking a civil engineering professional to join our growing team based in East Brunswick, NJ. This role is ideal for a candidate with 2–5 years of experience who is interested in public-sector work and wants to continue building a long-term career through meaningful project responsibility, mentorship, and a clear path toward licensure and advancement. In this role, you’ll contribute to a wide range of municipal engineering disciplines, including transportation, water and wastewater, stormwater, and infrastructure, while gaining deeper involvement in how projects move from planning and review through design, permitting, construction, and completion. This opportunity is well-suited for someone who has developed a solid technical foundation and is ready to build on it through greater ownership, direct municipal exposure, and a clear path toward Professional Engineer (PE) licensure. ResponsibilitiesMunicipal Review & Technical Analysis • Review site plans, subdivision and land development applications, and capital improvement projects for compliance with municipal ordinances, engineering standards, and applicable regulations, • Prepare technical review letters, engineering reports, and written recommendations for municipal clients, boards, and internal teams, • Support and, as appropriate, participate in planning board and zoning board meetings, responding to engineering comments and coordinating with applicants and stakeholders, • Apply engineering judgment to evaluate drainage, grading, roadway, utility, and stormwater components of development and public infrastructure projects Engineering & Design • Prepare and contribute to the design of municipal infrastructure improvements, including roadway, drainage, utility, and site-related projects, • Assist in the development of plans, specifications, cost estimates, and supporting technical documentation for municipal capital improvement projects, • Perform engineering calculations and analysis related to grading, drainage, stormwater management, utility systems, and roadway design, • Coordinate with internal disciplines and external agencies to support project delivery and regulatory compliance Construction Administration • Support construction-phase services for municipal projects, including submittal review, RFIs, field observations, contractor coordination, and documentation of field conditions, • Assist in evaluating field issues and recommending practical solutions in coordination with senior engineers and municipal clients, • Contribute to project closeout activities and help ensure construction aligns with approved plans and specifications Team Collaboration & Development • Work closely with experienced engineers and municipal professionals in a collaborative environment that supports continued technical and professional growth, • Take increasing ownership of assignments while receiving mentorship aligned with Artheon’s commitment to internal advancement and PE-track development, • Participate in professional development initiatives and contribute to a team culture focused on quality, responsiveness, and long-term client relationships Qualifications • Bachelor’s degree in Civil Engineering or a related field • 2–5 years of relevant experience in civil, municipal, or site/infrastructure engineering, • Engineer-in-Training (EIT) certification required, • Demonstrated progress toward Professional Engineer (PE) licensure, with the goal of obtaining licensure within approximately 6–12 months, • Strong written and verbal communication skills, including comfort participating in or supporting public meetings and municipal coordination, • Ability to manage multiple assignments, work collaboratively, and contribute effectively in a client-service environment, • Commitment to municipal engineering work and willingness to work from and commit to the East Brunswick, NJ office Preferred Qualifications • Experience reviewing or designing projects involving municipal infrastructure, transportation, stormwater, water/wastewater, or land development, • Familiarity with municipal ordinances, board review processes, and public-sector project delivery, • Experience with AutoCAD Civil 3D or similar engineering software, • Working knowledge of NJDEP, NJDOT, and/or local municipal standards and permitting processes BenefitsArtheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

$80 - $105/hourpayM&AAPAsSPAsContract NegotiationsRedliningmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: M&A Attorney Role Type: Contractor Location: Remote We are seeking seasoned M&A attorneys for a part-time role at the forefront of legal AI. This opportunity is for elite lawyers who want to help shape how advanced AI is trained, evaluated, and applied in real-world legal work, especially those who have deep experience with drafting, reviewing, negotiating, and redlining within the tech field. In this role, you will review, assess, and contribute to contract redlining workflows used to train and evaluate state-of-the-art AI models. Your work will directly improve how these systems identify risk and interpret contract language to create tools with improved precision and legal judgment. Key Responsibilities: • Perform simulated contract negotiations and redlining exercises., • Review and assess AI responses to contract scenarios, providing expert feedback to improve model performance and output precision., • Create objective evaluation frameworks and grading criteria to assess AI performance on contract tasks with rigor and consistency., • Collaborate with product and research teams to refine data, guidelines, and best practices for AI-driven contract review solutions. Required Skills and Qualifications: • J.D. from an ABA-accredited law school., • Active bar admission in at least one U.S. jurisdiction., • Minimum of 2 years in the M&A department of a corporate law firm., • Familiarity with standard M&A agreements, including APAs and SPAs., • Exceptional written and verbal communication skills with meticulous attention to detail., • Strong analytical capabilities and ability to translate legal expertise into actionable feedback for AI systems., • Demonstrated commitment to innovation at the intersection of law and technology., • Experience working with cross-disciplinary teams in fast-paced environments. Preferred Qualifications: • Prior exposure to AI, legal tech, or training initiatives., • Experience working with private equity firms. Why Join: • This is an opportunity to work at the intersection of law and technology., • You will help define how AI is developed for a new generation of legal practitioners., • You will apply your experience in a high-impact research environment.

$80 - $105/hourpayIn-house Counsel ExperienceAttention to DetailContract DraftingDeal NegotiationTechnology Transactionsmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Transactional Attorney Job Type: Contractor Location: Remote Job Summary: We are seeking seasoned in-house transactional attorneys for a part-time role at the forefront of legal AI. This opportunity is for elite lawyers who want to help shape how advanced AI is trained, evaluated, and applied in real-world legal work, especially those who have deep experience with drafting, reviewing, negotiating, and redlining within the tech field. In this role, you will review, assess, and contribute to contract redlining workflows used to train and evaluate state-of-the-art AI models. Your work will directly improve how these systems identify risk and interpret contract language to create tools with improved precision and legal judgment. Key Responsibilities: • Perform simulated contract negotiations and redlining exercises., • Review and assess AI responses to contract scenarios, providing expert feedback to improve model performance and output precision., • Create objective evaluation frameworks and grading criteria to assess AI performance on contract tasks with rigor and consistency., • Collaborate with product and research teams to refine data, guidelines, and best practices for AI-driven contract review solutions. Required Skills and Qualifications: • J.D. from an ABA-accredited law school., • Active bar admission in at least one U.S. jurisdiction., • Minimum of 3 years of in-house experience focused on technology transactions, particularly negotiating MSAs, NDAs, and DPAs., • Exceptional written and verbal communication skills with meticulous attention to detail., • Strong analytical capabilities and ability to translate legal expertise into actionable feedback for AI systems., • Demonstrated commitment to innovation at the intersection of law and technology., • Experience working with cross-disciplinary teams in fast-paced environments. Preferred Qualifications: • Prior exposure to AI, legal tech, or training initiatives., • Experience at a corporate law firm in either M&A or fund formation for private equity firms. Why Join: • This is an opportunity to work at the intersection of law and technology., • You will help define how AI is developed for a new generation of legal practitioners., • You will apply your experience in a high-impact research environment.

$80 - $105/hourpayFund ManagementFund FormationContract RedliningContract Negotiationsmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: Funds Attorney Role Type: Contractor Location: Remote We are seeking seasoned Funds Attorneys for a part-time role at the forefront of legal AI. This opportunity is for elite lawyers who want to help shape how advanced AI is trained, evaluated, and applied in real-world legal work, especially those who have deep experience with drafting, reviewing, negotiating, and redlining within the tech field. In this role, you will review, assess, and contribute to contract redlining workflows used to train and evaluate state-of-the-art AI models. Your work will directly improve how these systems identify risk and interpret contract language to create tools with improved precision and legal judgment. Key Responsibilities: • Perform simulated contract negotiations and redlining exercises., • Review and assess AI responses to contract scenarios, providing expert feedback to improve model performance and output precision., • Create objective evaluation frameworks and grading criteria to assess AI performance on contract tasks with rigor and consistency., • Collaborate with product and research teams to refine data, guidelines, and best practices for AI-driven contract review solutions. Required Skills and Qualifications: • J.D. from an ABA-accredited law school., • Active bar admission in at least one U.S. jurisdiction., • Minimum of 2 years in the funds department of a corporate law firm., • Familiarity with standard M&A agreements, including LPA’s, subscription agreements, and side letters., • Exceptional written and verbal communication skills with meticulous attention to detail., • Strong analytical capabilities and ability to translate legal expertise into actionable feedback for AI systems., • Demonstrated commitment to innovation at the intersection of law and technology., • Experience working with cross-disciplinary teams in fast-paced environments. Preferred Qualifications: • Prior exposure to AI, legal tech, or training initiatives. Why Join: • This is an opportunity to work at the intersection of law and technology., • You will help define how AI is developed for a new generation of legal practitioners., • You will apply your experience in a high-impact research environment.

$50 - $58/hourpayFinancemicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Corporate Finance Expert Job Type: Contract Location: Remote Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. Key Responsibilities: • Design technically demanding finance prompts and tasks that mirror investment banking, private equity, and corporate finance complexity, • Develop gold-standard solutions in Excel and PowerPoint to set objective benchmarks for AI model evaluation, • Create and refine clear grading rubrics for assessing AI outputs on transaction and modeling exercises, • Construct, modify, and review advanced financial models (3-statement, valuation, LBO, M&A, sensitivity analyses), • Produce transaction analyses and investment materials with a client-ready, production-grade level of detail, • Develop and adapt professional templates, decks, and supporting materials commonly used across IB, PE, and Corp Dev, • Ensure all deliverables are precise, unambiguous, and uphold industry standards Required Skills and Qualifications: • Hands-on experience in financial modeling, valuation, and transaction analysis, • Advanced Excel proficiency, including scenario analysis and model integrity checks, • Expertise in building polished, professional PowerPoint presentations and investment decks, • Strong familiarity with standard IB/PE/Corp Dev templates and processes, • Proven track record working on live deals, investments, or transaction execution, • Exceptional written and verbal communication skills, with a keen eye for detail and clarity, • Ability to independently produce client-grade financial materials under tight timelines Preferred Qualifications: • Experience evaluating or testing AI models, or developing technical prompts and assessments, • Exposure to multiple finance domains (e.g., IB to PE, consulting to Corp Dev), • Prior work creating training data or technical assessments for advanced technology initiatives

Job DescriptionLead High-Impact Civil Projects – Join Black Rock Enterprises as a Superintendent Job Title: Superintendent Company Name: Black Rock Enterprises Salary: $135,000 - $150,000 per year + Year-End Bonus Employment Type: Full-Time Schedule: Monday–Friday Location: Old Bridge, NJ Type of Construction/Work we perform: Civil Construction / Utilities / Sitework (Industrial, Government or Federal, Union) Job Overview Black Rock Enterprises is seeking an experienced Civil Construction Superintendent to lead field operations across industrial, government, and union-based utility and sitework projects. This leadership role is responsible for overseeing daily jobsite activities, managing crews and subcontractors, maintaining schedules, enforcing safety standards, and ensuring projects are delivered on time and within scope. The ideal candidate brings 7–10 years of civil construction experience, strong technical knowledge of plans and grading, and the leadership ability to drive performance while maintaining a positive, safety-first culture. Who We Are Black Rock Enterprises is a respected civil construction contractor specializing in utilities, industrial projects, government work, and site development. We pride ourselves on a strong family-oriented culture, high employee retention, and a leadership team that values personal growth and long-term career development. Our team members are not just employees — they are part of a company built on core values, communication, safety, and opportunity. We invest heavily in training, mentorship, and education to ensure our people grow with us. At Black Rock, you’re building more than infrastructure — you’re building a future. Responsibilities Include (but are not limited to): Lead and manage daily field operations for civil, utility, and industrial construction projects Interpret and execute project plans, specifications, grades, and technical documents Coordinate subcontractors, union labor crews, equipment, and materials Develop and maintain project schedules in collaboration with Project Management Enforce OSHA safety standards and company safety protocols Conduct daily safety meetings and ensure proper documentation Monitor production, quality control, and cost efficiency Utilize technology, project management software, and Excel to track progress and reporting Communicate effectively with project managers, engineers, inspectors, and ownership Serve as a leader and role model, promoting strong core values and team accountability Qualifications 7–10 years of experience in civil construction, utilities, or sitework Proven experience as a Superintendent or Senior Foreman on industrial or government projects Strong ability to read and interpret construction plans, grades, and specifications Proficiency in Microsoft Excel and construction management software Excellent leadership, communication, and organizational skills Strong safety awareness and commitment to OSHA compliance Experience working in a union environment preferred OSHA Certification preferred Compensation & Benefits • Compensation: $135,000 - $150,000 per year Year-End Performance Bonus Weekly Pay Cycle Retirement Savings Program • Health & Wellness: Medical Insurance Dental Insurance Vision Insurance Safety Equipment Provided • Work-Life Balance: Paid Time Off Paid Parental Leave (Maternity & Paternity) Volunteer Time Off (VTO) Travel Projects with Per Diem (as applicable) • Career Development: Paid Training & Certifications Apprenticeship & Mentor Programs Career Growth & Advancement Opportunities Personal Tool Replacement Program Tech Package (Smartphone or Tablet) • Additional Perks: Company Vehicle or Mileage Reimbursement Company Events Employee Rewards & Incentive Programs Work Schedule Monday – Friday Full-Time Overtime as project demands require Work Location Hybrid role based in New Jersey Field-based project sites (industrial, utility, and government projects) Travel may be required depending on project assignments Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Job Description Job Title: Clinical Research Nurse Job Description The primary purpose of the Clinical Research Nurse role is to ensure the successful, patient-oriented, safe, and effective conduct of clinical trials. This position assists investigators in preparing and implementing new clinical trials, screens and enrolls study participants, and provides protocol-related clinical management to participants while on study. Responsibilities • Collaborate with Protocol Activation office to initiate and activate new clinical trial protocols using the Study-start up task list., • Prepare and review study tools such as study binders, medication diaries, eligibility checklists, and flow sheets., • Verify Scientific Review Board (SRB), Institutional Review Board (IRB), data collection plans, and finance/contract approvals prior to study activation., • Review protocols and collect multidisciplinary logistical, educational, and financial feedback to identify and resolve potential obstacles to safe and effective study conduct., • Provide protocol-related nursing education to other disciplines to facilitate safe and effective care of enrolled patients., • Translate finalized protocol treatment plans, study calendars, and clinical trials billing grids into sample orders., • Collaborate with the clinical research team to ensure timely prescreening of potential subjects and review patient charts and medical history to confirm protocol eligibility., • Obtain informed consent for therapeutic and non-therapeutic studies in accordance with IRB, GCP, and institutional policies and procedures., • Register consented research patients with study sponsors and input data into the OnCore® clinical trials database., • Serve as an essential link between patients and research team members, ensuring protocol-specific orders are entered and executed accurately., • Coordinate continuity of protocol-specified procedures and treatments for study patients across disciplines and sites of care., • Manage patient reimbursement while on clinical trial, including the use of Rutgers issued or study-specific ClinCards., • Deliver high-quality, compassionate oncology nursing care and coordinate with clinical team, investigators, and ancillary departments as per protocol requirements., • Provide nursing assessment of study patients and document complete and accurate protocol-specified visits., • Collaborate with medical system staff to ensure timely coordination and delivery of services to patients., • Accurately grade adverse events and document toxicities using protocol-specific grading scales., • Complete Serious/Unexpected Adverse Event (SAE) forms and ensure accurate follow-up reports., • Assess overall protocol compliance and assist with deviation reporting according to IRB guidelines., • Collaborate with the Clinical Trial Lab to ensure study-specific bio-specimens are collected and processed according to protocol guidelines., • Assist with monitoring visits and audits, providing accurate and timely responses to sponsor queries., • Complete Case Report Forms (CRFs) and resolve database queries as needed., • Maintain research records for screened and enrolled patients., • Role model high levels of professional responsibility and performance., • Strive for professional growth through continuing education and skill building., • Demonstrate competence in utilizing computerized systems required for research tasks. Essential Skills • Graduate of an accredited school of nursing with a license to practice in the State of New Jersey., • Bachelor’s Degree in Nursing preferred., • One year of oncology experience required., • Three to five years of oncology research experience preferred., • Basic Life Support (BLS) certification., • Oncology Nursing Society (ONS) certification as an Oncology Certified Nurse (OCN) or Advanced Oncology Certified Nurse (AOCN) preferred., • Association of Clinical Research Professional as a Clinical Research Analyst (CRA) or Society of Clinical Research Associates (SoCRA) certification as a Clinical Research Professional (CCRP) preferred., • Detail-oriented with excellent organizational skills., • Proficiency in computer applications such as Word, Excel, etc., • Excellent communication and interpersonal skills. Additional Skills & Qualifications • Experience and comfortability communicating with patients., • Clinical Research Coordinator experience required., • Knowledge in oncology, informed consent processes, recruiting, enrolling, and managing source documents., • Screening of patients and coordination of study experience., • Equivalent education, experience, and training may be substituted for the degree requirement. Work Environment The work environment is within a statewide, national, and world-leading scientific discovery center focused on improving cancer outcomes. The center conducts innovative basic, clinical, and population research alongside cutting-edge patient-centered care. The position is part of a large clinical operations team with disease-specific groups, contributing to high enrollment needs across multiple sites, including Newark and other locations. The center is involved in all phases of clinical trials, encompassing adult and pediatric studies, with a long-term goal of increasing active subject enrollment. Job Type & Location This is a Contract to Hire position based out of New Brunswick, NJ. Pay and Benefits The pay range for this position is $55.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New Brunswick,NJ. Application Deadline This position is anticipated to close on Jul 15, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

WHAT YOU'LL DO Conduct routine site inspections across civil scopes including grading, drainage, utilities, paving, and structural elements Verify construction activities align with contract documents, plans, and technical specifications Track contractor performance, sequencing, and overall progr

Job DescriptionDescriptionCME Associates is currently recruiting for a Program Manager to join their team of professionals in our Municipal Engineering Department. The Program Manager is responsible for overseeing multiple related projects within an organization and various clients to ensure they align with business objectives, are executed effectively, and deliver the expected value. The senior program manager will operate as a senior leader within the company supporting staff and project managers deliver high quality products for our clients. They will be responsible for running teams between 3 to 15+ people varying on scope and owning the relationship for a client while engaging in business development activities that generate new revenue. Responsibilities • Ensure that all projects within the program are aligned with strategic priorities i.e. profitability, revenue growth, and resource management., • Responsible for the development of project plans, timelines, and budgets for specific projects assigned to them with little to no supervision., • Facilitate communication between team members, stakeholders, and clients to ensure everyone is aligned with project objectives and timelines., • Monitor project portfolio to ensure objectives are being satisfied and provide timely advice to the Manager/Client on any anticipated delays affecting project commitments., • Owns the progress of projects, ensuring that tasks are completed on time and within budget and is responsible for escalating when project metrics are at risk., • Responsible for the relationships and health of good standing with clients., • Works with senior leadership to develop and guide business development activities for achieving growth targets in assigned areas and clients., • Assist in allocating resources effectively, ensuring that tasks are completed on time and within budget and communicating with leadership when required for additional resources., • Review of Site Plan and Subdivision applicants submitted to Municipal Land Use Boards and attend Municipal Planning Board, Zoning Board of Adjustment, and Council Meetings, when required by management or client., • Coordinate client needs and internal resources and teams to effectively uphold high quality delivery of projects to our clients., • Apply technical skills required to manage the project and client expectations, and to support the staff (e.g. storm water, hydraulics, grading, land use planning, structural analysis, survey, base mapping, etc.), • Consider health, safety and environmental requirements when developing civil designs., • Monitor and track project portfolio’s expenses to ensure that the project stays within the allocated budget., • Ensure that project milestones and deliverables are achieved on schedule and within scope/budget., • Regularly communicate project status, issues, risks, and changes to stakeholders and senior management., • Act as the primary point of contact for clients, ensuring their needs are met and concerns addressed promptly., • Lead, motivate, and mentor project teams, ensuring collaboration and high performance., • Oversee or manage staff to ensure quality control checks to ensure deliverables meet project specifications and client expectations., • Serve as the main point of contact for stakeholders, providing regular updates and addressing concerns., • Engage in CME activities as a senior leader, going above and beyond to ensure the future success of junior staff are set up for success. Qualifications • Bachelor’s degree in engineering, Environmental Science, Surveying, Construction Management, or related disciplines., • Professional Engineer (PE) or equivalent professional license required., • 10+ years of experience in design, construction, or equivalent experience., • 10+ years of experience managing and assisting in project management or client management., • Certified Municipal Engineer (CME), preferredPreferred Qualifications:, • Advanced proficiency in scheduling, resource allocation, and progress tracking., • Proficiency in creating advanced Gantt charts, reporting dashboards, and resource management., • Organizing workflows and visualizing project tasks, particularly for smaller or less complex projects., • Knowledge of cost estimation techniques and software., • Entry level understanding KPIs (Key Performance Indicators) for tracking project progress., • Basic knowledge of AutoCAD or MicroStation if for managing design aspects of engineering projects., • Familiarity with software for managing quality audits and compliance., • Proficiency with Microsoft Teams for team communication and updates., • Experience with SharePoint Adobe or similar platforms to manage project documents, blueprints, and specifications., • Basic knowledge of contract law and understanding of contract management tools for reviewing and preparing contracts and monitoring deliverables., • Knowledge of safety regulations as OSHA., • Ability to create proposals, technical reports, specifications, and other project documentation in an organized and professional manner. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Estimator & Project Manager – Excavation / Site Development About the Opportunity A well-established and growing real estate development and construction firm in New Jersey is seeking a motivated Estimator & Project Manager to join its Excavation and Site Development Division. This position is ideal for professionals who bring both technical estimating expertise and hands-on project management experience in earthwork, utilities, and site construction. You’ll be part of a company with an expanding portfolio of residential and commercial projects across the region. Position Summary The Estimator & Project Manager will oversee project estimating, budgeting, scheduling, and field coordination for excavation and sitework operations. You’ll manage the full project lifecycle—from initial takeoff and bid through procurement, scheduling, and completion—ensuring work is delivered safely, efficiently, and within budget. Key Responsibilities Estimating & Preconstruction • Prepare detailed quantity takeoffs and cost estimates for sitework, grading, utilities, and excavation., • Review drawings, specifications, and site plans to determine project scope and production requirements., • Develop and maintain accurate project budgets and historical cost databases., • Work with management to analyze bid results, refine pricing, and forecast costs. Project Management • Plan and coordinate daily and weekly project activities with superintendents and field teams., • Oversee project scheduling, subcontractor coordination, and material procurement., • Monitor progress, production rates, and cost performance to ensure projects remain on track., • Resolve site issues and proactively identify opportunities for improvement or savings., • Ensure work meets quality, safety, and regulatory standards. Vendor & Client Coordination • Solicit and negotiate vendor and subcontractor pricing for materials and services., • Manage vendor relationships to ensure on-time delivery and competitive pricing., • Communicate regularly with internal stakeholders, suppliers, and management regarding project status and challenges. Reporting & Cost Control • Track actual vs. estimated costs to identify variances and maintain profitability., • Provide management with regular reports on project progress, cost trends, and upcoming needs., • Participate in post-project reviews to evaluate estimating accuracy and operational efficiency. Qualifications • 5+ years of experience in excavation, site development, or heavy civil construction., • Proven background in estimating and project management within construction., • Proficiency with estimating/takeoff software (Bluebeam, HeavyBid, or similar)., • Strong understanding of civil construction materials (aggregates, concrete, pipe, fill, asphalt, etc.)., • Excellent communication, organization, and leadership skills., • Degree in Construction Management, Civil Engineering, or related field preferred. Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.