Grading jobs in Tampa, FloridaCreate job alerts

Company Logo Overview Moretrench Class A operators are the top skill level of Moretrench heavy equipment operators. Moretrench, a Keller Company, has been in existence since the late 1800's. We perform industrial work in Florida with the majority of our work in the Tampa area. Fertilizer and power being our primary industries. The safety of our employees is the number one priority in our company. We have many long term employees because we pay a competitive rate, have outstanding benefits (including dollar for dollar match on 401K up to 6%) and the vast majority of our employees sleep in their own bed at night. Our business is stable, year over year, as the fertilizer and power companies still need to support the growth of food and provide energy in all economies. Therefore, our work avoids the ups and downs that are seen in residential and commercial construction and other industries. If you will consider a better pay and benefits package, are tired of traveling, sick of the Northeast winters, want an employer that cares about your safety first and want a stable business that's not always ramping down then ramping up then this is the company for you. If you are not safety conscious and not an experienced Class A operator, than you need not apply. We want the best! Responsibilities Work under the direction of the Lead Operator, Earthwork Foreman, Earthwork Superintendent, and/or other designated project leads Follows and maintains safe operating procedures and protocols for all equipment operation and field activity in accordance with Moretrench safety policy and OSHA requirements Safely performs physical duties associated with operation of Moretrench heavy equipment including but not limited to bending, kneeling, stooping, reaching, handling, climbing into and out of, and around heavy equipment Works safely in a wide variety of climatic conditions and job site environments commonly found at Moretrench job sites Performs daily greasing and fluid checks and assumes responsibility for the maintenance and safe operation of any and all assigned pieces of equipment Inspects assigned equipment prior to each use; and makes appropriate, accurate, and timely entries into the operator's checklist / equipment log for each piece of equipment operated Immediately reports any equipment damage, maintenance problems or concerns and safety issues to the Foreman and/or Superintendent Follows direction of the Foreman and/or Superintendent to overcome issues with changing and/or unforeseen field conditions or project scope Qualifications Minimum 5 years' experience operating multiple pieces of heavy equipment at Class A operator level Extensive experience in heavy equipment operations involving mass excavations; clearing and grubbing; backfilling and compacting; excavating and pipe laying; and construction and maintenance of embankments, berms, and dikes In the case of a truck loading excavator, the ability to fully and safely load loads trucks in an efficient manner to meet the goals of the project Demonstrate the skills of a finish grade operator (tolerance of 1/10 of a foot or better) on at least one piece of equipment, dozer or excavator Skilled and fully competent in using GPS system as a grading tool to achieve grades Skilled at the practice of operating safely on worksites according to OSHA, MSHA and Moretrench safety protocols and requirements Note that all job site locations are remote and temporary, so a form of transportation is required. The vast majority of our work is within a 1 hour drive of Riverview, FL (just outside of Tampa) so our personnel do very little travel Valid Florida driver's license, or the equivalent Able to operate heavy machinery for long periods, including evenings and weekends when necessary Must be able to operate machinery in all weather conditions and terrains Must be able to lift 25 pounds at a time #Keller1 #LI-SC1 Additional Information Salary Range: $23.00 - $28.00 / hr Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Moretrench is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Company Logo Overview The Laborer / Pipe Layer primary function involves manual labor working outside with your hands on a pipe crew for the installation of many different types of pipe. Must work productively and safely, consistently meet the production goals as set by the Foreman, Superintendent or Project Manager. Responsibilities Work safely to prevent on the job accidents and injuries, wear all site specific mandated protective equipment including but not limited to hard hat, hearing protection, safety-toe boots and safety glasses Manually maneuver pipe Lift a minimum weight of 100 pounds Shovel rock, dirt, or sand Swing a sledgehammer Lay pipe Figure grades Climb in and out of excavations by ladder or earthen ramp Manually carry materials including bags of concrete, lumber, plastic pipe, grates, castings, etc Responsible for the care and storage of all tools they use and clean up. Ability to lift objects, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions Ability to communicate orally and in writing, understand, follow and transmit written and oral instructions Must have transportation to and from various jobsite Ability to operate equipment and tools properly and safely Must meet attendance schedule with dependability and consistency Exercises their right, responsibility and obligation to stop work when knowledgeable of job hazards Work outside in the elements Able to respond quickly and willing to assist with any job duties asked by Foreman Be able to work well in a group setting as well as individually at times Self-sufficient Able to follow instruction Adhere to all traffic laws, ordinances, and rules involved in heavy equipment operation Ability to read, understands, follow, and enforce safety procedures and prepare written reports and forms Work independently in the absence of supervision Adhere to OSHA safety requirements. Wear mandated protective equipment and clothing Complete and pass all training requirements and attend all safety training programs as required Exercise the right, responsibility, and obligation to stop work when knowledgeable of job hazards Ability to work safely in a wide variety of climatic conditions and job site environments commonly found at Moretrench job sites Complete and pass annual phosphate training and attend all safety training programs related to job Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All employees are expected to adhere to the safety policies of Moretrench and the clients for whom we work. Following the safety policies of Moretrench Industrial, Inc. is a condition of employment and is everyone's responsibility Professionalism – Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments Work in a TEAM environment – Gives and welcomes feedback; Contributes to building a positive team spirit Oral Communication – Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings Ethics – Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values Adaptability – Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events Attendance/Punctuality – Is consistently at work and on time Dependability – Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan Attend and participate in weekly Tool-box safety meetings Must have safety steel-toe, or composite material, work boot (other safety requirements provided by employer upon hire) and normal wear and tear; however are employees responsibility if misplaced or misused) Problem Solving – Identifies and resolves problems in a timely manner; Works well in group problem solving situations; Uses reason even when dealing with emotional topics Interpersonal Skills – Focuses on solving conflict, not blaming; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things Must be able to communicate in English Qualifications Minimum 5 years' experience operating multiple pieces of heavy equipment at Class A operator level Extensive experience in heavy equipment operations involving mass excavations; clearing and grubbing; backfilling and compacting; excavating and pipe laying; and construction and maintenance of embankments, berms, and dikes In the case of a truck loading excavator, the ability to fully and safely load loads trucks in an efficient manner to meet the goals of the project Demonstrate the skills of a finish grade operator (tolerance of 1/10 of a foot or better) on at least one piece of equipment, dozer or excavator Skilled and fully competent in using GPS system as a grading tool to achieve grades Skilled at the practice of operating safely on worksites according to OSHA, MSHA and Moretrench safety protocols and requirements Note that all job site locations are remote and temporary, so a form of transportation is required. The vast majority of our work is within a 1 hour drive of Riverview, FL (just outside of Tampa) so our personnel do very little travel Valid Florida driver's license, or the equivalent Able to operate heavy machinery for long periods, including evenings and weekends when necessary Must be able to operate machinery in all weather conditions and terrains Must be able to lift 25 pounds at a time Additional Eligibility Qualifications (Project Specific) Must be 18 years or older and have a valid and appropriate state driver's license prior to employment Valid Drivers License Detailed Back-Ground Check Job may require out of town and even overnight travel Competencies / Technical Capacity Regularly works near moving mechanical parts and in outside conditions that include inclement weather. Requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination Time Management. Thoroughness. Customer/Client Focus Work Environment While performing the duties of this job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts and is frequently exposed to wet or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risks of electrical shock. The noise level in the work environment is usually loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Strength Standing 70% Walking 20% Sitting 10% Lifting - 50 LB Carrying – 50 LB Preferred Education and Experience Any combination of education and experience that demonstrates the knowledge and ability to perform the work. Additional Information Salary Range: $18.00 - $22.00 / hr Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Moretrench Industrial is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.

Company Logo Overview Moretrench Class A operators are the top skill level of Moretrench heavy equipment operators. Moretrench, a Keller Company, has been in existence since the late 1800's. We perform industrial work in Florida with the majority of our work in the Tampa area. Fertilizer and power being our primary industries. The safety of our employees is the number one priority in our company. We have many long term employees because we pay a competitive rate, have outstanding benefits (including dollar for dollar match on 401K up to 6%) and the vast majority of our employees sleep in their own bed at night. Our business is stable, year over year, as the fertilizer and power companies still need to support the growth of food and provide energy in all economies. Therefore, our work avoids the ups and downs that are seen in residential and commercial construction and other industries. If you will consider a better pay and benefits package, are tired of traveling, sick of the Northeast winters, want an employer that cares about your safety first and want a stable business that's not always ramping down then ramping up then this is the company for you. If you are not safety conscious and not an experienced Class A operator, than you need not apply. We want the best! Responsibilities Work under the direction of the Lead Operator, Earthwork Foreman, Earthwork Superintendent, and/or other designated project leads Follows and maintains safe operating procedures and protocols for all equipment operation and field activity in accordance with Moretrench safety policy and OSHA requirements Safely performs physical duties associated with operation of Moretrench heavy equipment including but not limited to bending, kneeling, stooping, reaching, handling, climbing into and out of, and around heavy equipment Works safely in a wide variety of climatic conditions and job site environments commonly found at Moretrench job sites Performs daily greasing and fluid checks and assumes responsibility for the maintenance and safe operation of any and all assigned pieces of equipment Inspects assigned equipment prior to each use; and makes appropriate, accurate, and timely entries into the operator's checklist / equipment log for each piece of equipment operated Immediately reports any equipment damage, maintenance problems or concerns and safety issues to the Foreman and/or Superintendent Follows direction of the Foreman and/or Superintendent to overcome issues with changing and/or unforeseen field conditions or project scope Qualifications Minimum 5 years' experience operating multiple pieces of heavy equipment at Class A operator level Extensive experience in heavy equipment operations involving mass excavations; clearing and grubbing; backfilling and compacting; excavating and pipe laying; and construction and maintenance of embankments, berms, and dikes In the case of a truck loading excavator, the ability to fully and safely load loads trucks in an efficient manner to meet the goals of the project Demonstrate the skills of a finish grade operator (tolerance of 1/10 of a foot or better) on at least one piece of equipment, dozer or excavator Skilled and fully competent in using GPS system as a grading tool to achieve grades Skilled at the practice of operating safely on worksites according to OSHA, MSHA and Moretrench safety protocols and requirements Note that all job site locations are remote and temporary, so a form of transportation is required. The vast majority of our work is within a 1 hour drive of Riverview, FL (just outside of Tampa) so our personnel do very little travel Valid Florida driver's license, or the equivalent Able to operate heavy machinery for long periods, including evenings and weekends when necessary Must be able to operate machinery in all weather conditions and terrains Must be able to lift 25 pounds at a time #LI-SC1 Additional Information Salary Range : $23.00 - $28.00 / hr Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Moretrench is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

A General Operator position in Lithia, FL is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator you will operate machinery to perform activities such as excavating, backfilling, trenching, ditching, clearing, looming, fine grading, and final clean up. The operator may perform functions of a laborer as required. • Operate heavy equipment safely as part of a crew., • Perform Operator level maintenance on the machine., • Understand safe working loads and signals., • 3-5 years of construction experience., • Firm knowledge of equipment operations and maintenance., • Must be willing to work overtime as required., • Employee Stock Ownership Program (ESOP), • Health Plan, Dental Plan, Group Life Insurance, • Prescription Drug Plan, • 401k Retirement Plan, • Health Saving Account (HSA) or Flexible Spending Account (FSA), • Health Reimbursement Account (HRA), • TELADOC, • Employee Assistance Program, • Free Wellness Program

Job Description We are hiring Entry to Associate level Civil Engineers to join a growing team, that performs commercial, residential, and government projects. Pay: 65-100k Qualifications: -Bachelor of Science - (Civil Engineering Preferred) -Pro-active, enthusiastic, self-starter with a good attitude who pays attention to details and is willing to work in a supportive environment -Excellent written and verbal communications skills are essential, as is the ability to work with clients and colleagues at all levels -Sense of urgency and desire to compete in the market through the ability to multi-task under rigid deadlines -Knowledge of AutoCAD -Proficiency with MS office, with an emphasis on Excel Responsibilities: -Works on a variety of civil and site land development projects performing various project tasks in conjunction with the multi-disciplinary team of Engineers and Planners -The engineer is responsible for determining the feasibility of a development project and assessing the land to ensure planned development can be supported through a holistic approach to design and attention to detail -Prepares design plans, supportive calculations, and reports for assigned projects -Perform all calculations necessary for grading and drainage, stormwater control facilities, water quality, domestic water distribution, and other underground utilities -Develop and issue drawings, design documentation, and reports for residential and commercial type land development projects -Coordinate activities with other disciplines, internally and externally -Participate and contribute to design and production meetings -Interact with contractors, fabricators, owners, and internal clients to develop project requirements, schedule, and cost estimates prior to project implementation -Drive coordination and design necessary to obtain local, state, and federal permits as it relates to land development & utility construction projects -Ensures plans meet zoning requirements and do not conflict with other municipal regulations -Resolve design and construction conflicts in the field in real time

Job DescriptionBenefits: • 401(k) matching, • Company parties, • Competitive salary, • Dental insurance, • Free food & snacks, • Health insurance, • Opportunity for advancement, • Design and develop detailed civil construction plans for various land development (commercial/residential/municipal) projects, including site, utilities, grading, and stormwater layout/design from the beginning stage of project(s), through final construction plans, to final as-built plans under the direct supervision of a P.E., • Assist with permitting of land development projects, • Research feasibility of alternative design approaches, site conditions, and regulatory agency specifications, • Calculate quantities, areas, etc. corresponding with civil engineering as well as prepare data required for site development, stormwater, utility, drainage, and roadway designs, • Work with team and independently to establish and meet timelines, budgets, and project challengesQualifications:, • BS Degree in Civil Engineering, • PE or the ability to become licensed, • Relevant land development engineering and permitting experience, • Experience with site, grading, utilities, stormwater management design from the conceptual stage through final design, • Proficiency in AutoCAD (Civil 3D preferred), • Understanding of codes and regulations, and permitting requirements as related to the preparation of construction documents, • Possess a valid Florida Drivers LicenseBenefits: Competitive Compensation Medical Insurance Dental Insurance Paid Personal Time Off Paid Holidays Retirement Plan with Company Match Regular Social Events Occasional Lunches Provided Family-like Culture Paid Licensing / Certification Fees and Renewals

Job DescriptionTitleProject Engineer EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description CAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Position Overview: As a Project Engineer at CAGE, you will be tasked with the preparation, scheduling, and coordination of design documents and calculations for various site development tasks. These include site planning, stormwater management calculations, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other relevant reports. You'll work under the guidance and supervision of the project manager to ensure smooth execution of all activities. This role is primarily remote, with the expectation that candidates are based in the Tampa metropolitan area to accommodate occasional in-person collaboration and project needs. Typically Reports To: Project Manager Typical Years of Experience: 3+ Key Responsibilities: • Manage site planning, stormwater management calculations, utility design, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other reports with the direction and guidance of the project manager., • Manage project communication with clients and build trust and relationships with clients through consistent delivery of quality products and service., • Utilizes time management and organizational skills to excel at project tasks., • Prioritize projects tasks for multiple ongoing projects., • Attend client/municipal meetings with the project manager to review project issues and pursue project approval, including technical meetings and public hearings with the direction and guidance of the project manager., • Attend project meetings with the direction and guidance of the project manager., • Coordinates with project subconsultants to obtain the necessary information for project design., • Continuously meets all deadlines or informs the project manager well in advance if a deadline cannot be met due to extenuating circumstances., • Assist the project team in preparing the project schedule and include all necessary tasks to define the critical path., • BS in Engineering from an accredited university., • 3+ years of experience., • EIT credentials (passing of the FE exam) preferred, but not required., • Proficient with CAD Civil 3D software., • Possess a firm understanding of engineering design for all aspects of site development such as site grading design, utility design, and storm management design., • Focused, motivated, and results oriented., • Embraces teamwork approach and possesses strong communication skills., • Must demonstrate a firm understanding of project flow and necessary project tasks. Professional Growth • Tuition reimbursement & on-demand training, • Clear career paths & promotion opportunities, • Book club, happy hours & social events, • Inclusive, collaborative environment, • Compensation: $80,000-$95,000, • The salary range provided is a general guideline. Final compensation will be based on factors such as experience, qualifications, skills, and overall alignment with the role and company needs., • Medical, dental & vision plans (HSA options), • Mental health resources & EAP access, • Hybrid work options, • Flexible time off - no accruals, • 7 paid holidays + 1 floating holiday, • Paid parental leave (4 weeks), • 401(k) with an up to 4% match, fully vested day one, • Life & disability insurance At CAGE, we excel as problem solvers, prioritize cost-conscious design, and deliver exceptional value to our clients. Crucially, we foster strong relationships built on trust and satisfaction. We seek individuals who share our enthusiasm, passion, and dedication to hard work which have propelled us to our current success. Are you ready to make a difference at CAGE? If so, we look forward to meeting you. CAGE Civil Engineering is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Join our team and contribute to the innovative solutions that drive our success. CAGE does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from the CAGE team. Pre-approval is required before any external candidate can be submitted. CAGE will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to hiring managers. LocationFL - TAMPAFull-Time/Part-TimeFull-Time About the OrganizationCAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Powered by JazzHR ZehTFdlGIU

Job DescriptionCivil Engineer EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description CAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Position Overview: A Civil Engineer at CAGE is a team member entrusted with leveraging their technical expertise while gaining proficiency in the intricacies of the land development sector. Their primary duties revolve around producing engineering design documents and calculations including code/ordinance research, site planning, stormwater management calculations, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other pertinent reports. Typically Reports To - Project Engineer Typical Years of Experience - 0 to 3 years This position is temporarily remote and requires being located in a commutable distance from Tampa to accommodate for in-person collaboration and project needs. Key Responsibilities: • Produce stormwater management calculations, utility design, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other reports with the direction and guidance of the project engineer and project manager., • Utilizes time management and organizational skills to excel at project tasks., • Prioritize projects tasks for multiple ongoing projects., • Coordinates with project subconsultants to obtain the necessary information for project design with the direction and guidance of the project engineer and project manager., • Continuously meets all deadlines or informs the project manager well in advance if a deadline cannot be met due to extenuating circumstances., • Assist the project team in preparing the project schedule and include all necessary tasks to define the critical path., • CAD Civil 3D Software, • Site Grading Design, • Utility Design (watermain, sanitary, sewer, storm sewer), • Stormwater Management Design, • Bachelor of Science in Engineering from an accredited university, • Focused, motivated, and results oriented., • EIT credentials (passing the FE exam) preferred, but not required., • Embraces teamwork approach and possesses strong communication skills., • Must demonstrate the ability to learn quickly. Professional Growth • Tuition reimbursement & on-demand training, • Clear career paths & promotion opportunities, • Book club, happy hours & social events, • Inclusive, collaborative environment, • Compensation: $70,000-80,000, • The salary range provided is a general guideline. Final compensation will be based on factors such as experience, qualifications, skills, and overall alignment with the role and company needs., • Medical, dental & vision plans (HSA options), • Mental health resources & EAP access, • Hybrid work options, • Flexible time off - no accruals, • 7 paid holidays + 1 floating holiday, • Paid parental leave (4 weeks), • 401(k) with up to 4% match, fully vested day one, • Life & disability insurance, • Employee discount program Why CAGE? At CAGE, we excel as problem solvers, prioritize cost-conscious design, and deliver exceptional value to our clients. Crucially, we foster strong relationships built on trust and satisfaction. We seek individuals who share our enthusiasm, passion, and dedication to hard work which have propelled us to our current success. Are you ready to make a difference at CAGE? If so, we look forward to meeting you. CAGE Civil Engineering is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Join our team and contribute to the innovative solutions that drive our success. CAGE does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from the CAGE team. Pre-approval is required before any external candidate can be submitted. CAGE will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to hiring managers. LocationFL - TampaFull-Time/Part-TimeFull-Time About the OrganizationCAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Powered by JazzHR ol7tvn1cgZ

Job Description OBJECTIVE The ability to maintain high profile commercial and residential properties throughout the Central Florida area while working in a team environment. MAJOR DUTIES AND RESPONSIBILITIES Must be able to work outdoors in all weather conditions doing very physical work. Able to lift/carry up to 50 pounds. Must be enthusiastic, dependable and a team player. Able to work safely while operating equipment such as mowers, blowers, trimmers and edgers. Will perform regular landscape maintenance services such as mowing, edging, weeding, trash collecting, trimming, pruning, grading, light planting, etc. COMMUNICATION Most importantly as a employee BE FRIENDLY, DO A GOOD JOB, BE RESPONSIVE, and KEEP COMMUNICATIONS OPEN QUALIFICATIONS Previous experience with landscaping equipment and knowledge of landscape plant material is helpful. A clean Florida driving record is a plus. Company DescriptionLiberty Staffing USA is a diverse culture-minded staffing company run by skillful staffing professionals with decades of combined experience. Our ultimate goal is to place the right people in the right jobs, provide our customers with premium service.Liberty Staffing USA is a diverse culture-minded staffing company run by skillful staffing professionals with decades of combined experience. Our ultimate goal is to place the right people in the right jobs, provide our customers with premium service.

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview The Technical Manager is essential to ensuring project excellence and upholding the McAdams brand. As a leader in quality assurance and quality control, this role oversees project setup, execution, and closeout to deliver top-quality results. The Technical Manager provides technical expertise to resolve complex design challenges, supports project management to keep work on schedule and within budget, and coaches team members to foster skill growth. Working closely with Project Managers and Designers, the Technical Manager ensures high-quality deliverables and mentors staff across all McAdams offices. Key Responsibilities • Provide expertise to resolve complex design issues and maintain project quality, mentoring engineering and design staff, • Conduct quality assurance checks on deliverables, ensuring compliance with standards and regulatory requirements, • Collaborate with Project Managers to develop project plans, oversee drawing preparation, and manage staffing needs across all phases, • Coordinate technical requirements with clients, regulatory agencies, and sub-consultants throughout the project lifecycle, • Lead and guide the design team, assigning work, providing feedback, and conducting performance reviews, • Mentor designers, CAD technicians, and engineers to foster professional growth and team cohesion, • Serve as a key liaison between design staff, CAD technicians, and project managers, facilitating clear communication, • Act as the main point of contact for technical matters with clients, coordinating adjustments as needed, • Oversee the creation of civil engineering documents, including site, utility, stormwater, grading, and permitting plans, • Ensure designs meet company standards and align with best practices in civil engineering, • Lead technical training initiatives, sharing knowledge across teams and offices to enhance skills and standardize practices, • Assist with project scope, budget, and schedule development, adjusting plans as project needs change, • Support project pursuits and manage single-service line projects as needed, • Four-year bachelor's degree from an accredited program in Civil Engineering, Environmental Engineering, Biological and Agricultural Engineering, Civil Engineering Technology, or related field required, • EI required; PE required, • Minimum of 7+ years' experience in civil site design or related field required, • Demonstrated expertise in AutoCAD Civil 3D is essential, • Strong understanding of local, state, and federal regulations related to land development, zoning, stormwater management, and permitting processes The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions. • Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions., • Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion., • Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time., • Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job Description About Us At Larson Design Group (LDG), we’re more than an award-winning Architecture, Engineering, and Consulting firm; we’re a team of passionate professionals united by a bold purpose: creatively shaping our world. From designing innovative solutions to building stronger communities, we approach every project with vision, collaboration, and a commitment to excellence. As a 100% employee-owned company, every success we achieve belongs to all of us. That ownership mindset drives our decisions, inspires creativity, and fosters a culture where your voice matters. At LDG, you’ll find a dynamic, people-focused environment where we work hard, share knowledge, and celebrate wins together. We offer a flexible work environment, paid training for required licensure, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) all designed to support your growth, both professionally and personally. Your Opportunity + Impact The Designer applies foundational to intermediate engineering and/or landscape architecture principles to perform design calculations, prepare technical reports, and develop design plans and details. This role may also contribute to minor project decisions under the guidance of senior team members. Key Responsibilities • Utilizes software such as CAD, Civil 3D, Revit, MicroStation, InRoads, SketchUp, Photoshop, and other discipline-specific programs to produce accurate, high-quality design drawings., • Reviews work for accuracy, incorporates redline corrections, and performs backchecks to ensure precision and compliance with project standards., • Prepares and reviews specifications, evaluates submittals, and coordinates project documentation and submissions., • Coordinates the development of advanced multi-discipline drawing sets, collaborating with technical, administrative, and design staff as required., • Promotes and adheres to quality assurance and quality control processes to enhance deliverable quality and minimize design errors and omissions., • Researches, interprets, and applies applicable design standards, regulations, codes, and permitting requirements to ensure compliance., • Independently develops standard project details under direction and ensures consistency across deliverables., • Reviews shop and working drawings submitted by contractors to verify technical accuracy and adherence to design intent., • Education: Associates or Bachelor’s degree in a Technical discipline preferred., • Experience: Minimum of eight (8) years’ job-related experience., • Demonstrates a strong desire to expand knowledge and take on new responsibilities within the field., • Proficient in Revit, AutoCAD Civil 3D, Microstation/InRoads, and/or Hydrologic and Hydraulic Software Packages to be used for Site Layout, Grading, Utility, and Storm Water Management Plan design and/or other discipline-specific programs preferred., • Proficient in Microsoft Office Suite (Excel, Word, Power Point, Outlook)., • Excellent organizational and time management skills to handle multiple tasks and meet project deadlines effectively. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR 3cTsaqXHcE

Job DescriptionDescriptionBuild communities. Lead impactful projects. Grow your career. CPH is a nationally recognized, multi-disciplinary Engineering and Architecture firm ranked among ENR’s Top 500 Design Firms. We’re expanding our Community Development team in Tampa and looking for a Project Manager / Site Civil Engineer who’s ready to take ownership of meaningful projects and play a key role in shaping communities across Florida. In this role, you’ll lead and work on projects that are designed by CPH’s Community Development Team with a focus on the site civil aspects of the design including site layout, grading, drainage, utilities, construction plan preparation, and permitting. These projects are for a variety of clients locally, regionally, and throughout the U.S. Projects include parks and recreation, operations and public works complexes, public safety, education and institutional projects, airport facilities, and localized and regional drainage systems. You will lead the team and projects from initial concept and due diligence through permitting and construction. This is a high-visibility position offering leadership responsibility, client interaction, and a clear path for growth. Up to $10,000 sign-on bonus! What You'll Do: • Serve as a lead / senior civil engineer on a variety of site/civil project types., • Take a leadership role and perform general and specific portions of project or as part of a team with other experienced engineers., • Work under supervision of a Program Manager, however able to organize workload and work independently on project-specific design tasks., • Provide technical leadership and mentorship to junior engineers and design staff., • Serve as the primary client liaison, building and maintaining strong relationships while identifying opportunities for additional services., • Prepare and review engineering plans, technical reports, calculations, and specifications to ensure quality and compliance., • Develop and manage project scopes, schedules, budgets, and resource allocation., • Preparation of permits such as ERPs(Environmental Resource Permits), FDEP NPDES, SWPPP, Grading, Utilities (FDEP and FDOH), and Civil Support for local county/city site development permitting., • Collaborate with multidisciplinary teams including planning, environmental, transportation, and surveying., • Proactively identify risks and develop practical, cost-effective solutions to keep projects on track., • Bachelor’s degree in Civil Engineering or related field., • 8+ years of experience in site/civil engineering., • Proven experience managing site development projects and client relationships., • Strong experience with site layout, grading, drainage, utilities, and stormwater design., • Proficiency in AutoCAD Civil 3D., • Familiarity with local permitting processes and regulatory requirements., • Strong leadership, communication, and client-facing skills., • Ability to manage multiple projects simultaneously while maintaining quality and deadlines., • Strategic thinker with strong problem-solving and decision-making abilities., • Dependent upon experience., • CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company., • Company Paid Life Insurance and Short-Term Disability., • 401K, Paid Personal Time Off, Paid Holidays, and Paid Paternal Leave.CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

Job DescriptionDescriptionStonefield Engineering & Design, a full-service Professional Engineering and Consulting Firm, is recruiting enthusiastic and goal-driven project managers with a minimum of 4 years of experience. Our firm offers a unique career opportunity for candidates as passionate about personal and professional growth as our team is. We are committed to providing the highest level of engineering expertise and customer service to our clients. For those who join the Stonefield team, we provide the tight-knit feel of a small firm while offering unparalleled access to management and opportunities for learning and career advancement. Stonefield provides engineering and consulting services for private developers, universities, and public agencies. We are Site Engineers and Transportation Engineers seeking to expand our boundaries and services at all times. Above all, we are problem-solvers and solution-finders for our clients and the communities we work in. We employ technology – from leading edge communication devices to geographic information system and 3-D modeling software – to provide accurate and easily comprehensible project documents to meet the objectives of our clients. Stonefield Engineering and Design is currently recruiting a Project Manager to join the Site/Civil Engineering Team. This is a dynamic position that will offer the opportunity for diverse interaction and rapid growth. The right candidate will bring a strong technical background, interpersonal skills, intellectual curiosity, and a desire for continued growth and learning. As Stonefield is a multi-disciplinary firm, interest in cross disciplinary work within the field of Civil Engineering is encouraged. Key ResponsibilitiesJob responsibilities will include teaching and training entry-level to mid-level designers and analyst, design of site layout, grading, stormwater management, utilities, landscaping, lighting, and soil erosion and sediment control measures. The position will also include project management responsibilities, zoning and land development permitting, field inspection, hydraulic and hydrologic design and analysis, site plan drafting, environmental impact assessment, and preparation of project reports. Skills, Knowledge and ExpertiseWhile there are numerous skills that will assist a new employee – such as knowledge in AutoCAD, grading and drainage design abilities, field experience, and technical writing – we are also intrigued by someone who seeks to overcome challenges and to be an innovator within the industry. The following minimum requirements are expected of candidates: • Bachelor of Science degree in Civil Engineering, • Must be a licensed PE, • Minimum of 4 years of experience with site and grading design, zoning and site plan permitting process, • Proficiency in AutoCAD, • Ability to work effectively on a team, • Strong communication and organizational skills, • Self-motivated Health & Wellness • Robust Health Plans: Comprehensive medical, dental, and vision coverage options to fit your needs., • Wellness Program: Resources and support to help you prioritize your mental, physical, and emotional health., • Fitness Membership: Company-sponsored fitness memberships to keep you active and energized., • Pet Insurance: Options to keep your furry family members protected. Financial Growth • 401(k) & Roth Retirement Plans: Save for your future with pre-tax and post-tax options., • Company Match: Stonefield contributes alongside you to grow your retirement savings faster., • Generous Referral Bonus Program: Earn big when you help us grow our team with talented people. Time Off & Events • Generous PTO Policy: Ample paid time off so you can rest, recharge, and enjoy life outside of work., • Paid Company Events: From ski trips to summer parties, holiday celebrations, and more—we value time spent together as a team. And More We’re always looking for ways to expand and enhance our benefits, ensuring Stonefield remains a place where people can thrive personally and professionally.

Job Description Local Tampa area construction firm is looking for operators to work in in the grading and excavation fields. Operators should be able to work with and understand skid steer and excavator operation. Ideal candidates will have transportation to and from the Brandon, FL area and surrounding locations. Position will require the use of also operating compactors, raking, and miscellaneous shoveling to complete tasks on each site as needed. Pay will be comparable to experience and skill set. Please contact 813-654-9200 extension 1 or send an email to obtain an application or send an email with experience and or resume. Position is available for immediate consideration and start. Please not calls from Recruiters or professional services. Company DescriptionWe are rapidly growing Tampa based contracting firm. Our focus on the long term, fosters a environment in which we allow our employees to thrive and help make our company grow.We are rapidly growing Tampa based contracting firm. Our focus on the long term, fosters a environment in which we allow our employees to thrive and help make our company grow.

Job Description Primary Duties: Duties include design, permitting, and coordinating the water resource parts of projects. Engineering design tasks include grading, storm sewer and drainage area sizing. Primary Function: Act as staff specialist in the area of water resource engineering. Plan, design and provide construction administration design for drainage aspects of project. Primary Duties: • Review project and site. Provide concept design for overall drainage system., • Research, collect and review available data on existing and surrounding permits., • Perform hydrologic and hydraulic calculations for stormwater management system analysis., • Prepare applications for submittal to permitting agencies including water management districts, FDOT, Counties and Cities., • Prepare drainage reports, design documents, and design plans and specifications., • Supervise and direct staff assigned to Project Team., • Assist with quality control., • Coordinate with sub-consultants and related companies, including geotechnical, architecture, landscape architecture, lighting, etc., • Bachelor’s Degree in Civil Engineering., • 5-10 years directly applicable experience in water resources/storm water, • Florida Professional Engineering (P.E.) License or ability to become professionally registered within one year., • Experience with AutoCAD, Ponds and ICPR design software., • Ability to work on projects in a team environment. While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HJ1

Job Description AutoCAD Drafter We are seeking a Civil CAD Drafter proficient in AutoCAD Civil 3D to assist in environmental projects for both private and municipal projects. Our focus is mainly on horizontal construction, necessitating expertise in generating plan views, profile views, cross-sections, grading, and volume calculations. Your role entails marking up designs, producing figures, and assembling drawing sets. Collaboration within a team and independent task completion will be required, working on diverse projects alongside various engineers. You will work with a team as well as independently to complete tasks and projects from a wide variety of engineers. Responsibilities: • Performs drafting, detailing, and graphics layout with limited supervision., • Prepare construction documents using AutoCAD Civil 3D, • Apply and follow appropriate CAD standards and best practices, • Perform volume calculations using AutoCAD Civil 3D, • Support all aspects of drafting or CAD under the supervision of the lead professional, • Prepare site plan layout from existing maps or tracings, corrections to existing drawings, etc., • Prepare well boring logs from field notes Requirements Qualifications • 2+ years of experience in drafting or graphics required, • Proficiency in AutoCAD Civil 3D required, • 2+ years of experience in civil and site grading experience preferred As a growing firm, we offer excellent opportunities for career advancement and a competitive package, including: • Medical, Dental, Vision, Life and Disability Insurance, • 100% employer- funded Employee Stock Ownership Plan (ESOP) and 401K including employer match, • Annual Bonus Program, • Student Debt Employer Contribution Program, • Paid holidays, PTO, and Parental Leave

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 2-4+ years of professional experience, • Master's Degree in Mathematics is required, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

GAI Consultants has a career-building opportunity for a Civil Engineer 3 within our Power Business Unit's Civil and Environmental Engineering Business Sector. GAI is an established and growing multi-discipline engineering firm with tremendous growth opportunities in the Pittsburgh, PA region. The successful candidate will enjoy working in a challenging, fast-paced, and team-oriented environment that will utilize their related experience to develop professionally and grow in today's global environment. This position can be based out of any of GAI's office locations. This position can be fully remote. GAI's Power Business Unit focuses on developing and supporting Energy, Institutional, Industrial, and Manufacturing clients. Job Duties: • Plans, designs, and facilitates civil engineer project design tasks such as site grading and drainage design; access road design; erosion and sediment pollution control design; stormwater management design; report preparation; and permitting., • Performs technical and feasibility studies., • Collaborates with other professionals and discusses requirements with team members., • Uses computer programs to develop detailed designs., • Ensures that work products meet client, environmental, and safety requirements., • Performs work with minimal guidance and supervision., • Handles complex issues and refers only the most complex issues to more experienced staff., • Strong working knowledge of civil engineering design tasks and a positive attitude., • Possesses strong knowledge of AutoCAD Civil 3D and analysis modules., • Performs moderate to complex civil design tasks while delegating more routine tasks to staff with less experience., • Mentor, guide and check the work of less experienced staff., • Strong team collaboration, oral and written communication, design expertise, and problem-solving skills are required., • Adhere to the safety and quality procedures of GAI and our clients., • Travel to other offices/meet with clients/attend project-specific meetings (occasional local/regional travel that is expected to be 5%-10% of the time). General Characteristics • Applies broad knowledge of principles and practices in a specific practice area., • Independently evaluates, selects, and adapts standard techniques, procedures, and criteria., • Leads tasks and projects of moderately complex scopes., • Develops plans, specifications, and other project documents., • Assigns tasks to other technical and non-technical staff. Predominantly plans and coordinates detailed aspects of the engineering work., • Prepares scopes, budgets, and schedules for assignments., • Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters., • Receives direction on unusual conditions and developments., • Mentor direct reports and other engineers., • Possesses advanced oral and written communication skills, including interpretation of complex technical and contractual language., • Considers the needs of diverse project stakeholders., • Leads project meetings and represents the organization in communications pertaining to broad aspects of engineering assignments. GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore anarray of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative teamthat'scommitted to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Marketbased, competitive compensation, • Medical, dental, and vision plans, • Companypaid short-term and long-term disability, • Companypaid life insurance, • Generous paid time off + 7 paid holidays, • Anadditionalfloating holiday-use it for what matters to you, • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationBachelors of Engineering (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

GAI Consultant's Inc. is seeking a Civil Designer 3 to join the team in any of our offices. You will work closely within our dynamic NE Engineering group. #INDHP Qualifications: • Advanced level of skills. Strives to become proficient in aspects of the Civil 3D., • Seeks to advance their knowledge of project design development, advanced grading tools, corridor, and alignments., • Experience in mass grading and linear projects., • Stays current on software updates and advises based on technical changes., • Ability to work indoors in professional office settings., • Ability to sit for extended periods while performing computer-based tasks., • Frequent use of hands and fingers for typing, writing, and handling office equipment., • Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work., • Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings., • Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance., • Adequate hearing to participate in conversations, phone calls, and virtual meetings., • Focuses a significant effort to mentoring lower-level CAD Operators. Provides solutions to unique problems. cites insufficiencies and supplies recommendations. GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore anarray of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative teamthat'scommitted to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Marketbased, competitive compensation, • Medical, dental, and vision plans, • Companypaid short-term and long-term disability, • Companypaid life insurance, • Generous paid time off + 7 paid holidays, • Anadditionalfloating holiday-use it for what matters to you, • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationAssociates of Drafting (required) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

GAI Consultants has a career-building opportunity for an Assistant Engineering Manager within our Power Business Unit's Civil and Environmental Engineering Business Sector. GAI is an established multi-disciplined engineering firm with tremendous growth opportunities in Ohio, West Virginia, Virginia, Maryland and Pennsylvania. The successful candidate will enjoy working in a challenging, fast-paced, and team-oriented environment that will utilize their related experience to develop professionally and grow in today's global environment. This position is Hybrid, can be a fully Remote position for the right candidate. GAI's Power Business Unit focuses on developing and supporting Energy, Institutional, Industrial, and Manufacturing clients. As an Assistant Engineering Manager at GAI, you will have the opportunity to manage civil engineering and permitting tasks, delegate and provide direction to engineering/drafting staff, and lead and review the development of calculations, drawings, and associated project deliverables. You also will develop proposals and monitor budgets. Communication skills are essential to this position, as an Assistant Engineering Manager will need to effectively coordinate with internal and external clients as well as their Engineering Division Manager, Business Sector Leader, and other engineering discipline leads (such as mechanical, electrical, process, environmental, and geotechnical engineering). #INDHP Job Duties: • Plans, designs, and facilitates civil engineering project design tasks such as site grading and drainage design; access road design; erosion and sediment pollution control design; stormwater management design; report preparation; and permitting., • Task management duties include being in responsible charge of technical work, staff planning, budget/schedule management, scope change management, quality assurance/peer reviews, report writing, staff mentorship, and client coordination., • Proposal preparation including the scope and budget development and interdisciplinary coordination., • In addition to proposal preparation, written communication may include the preparation of site reports, narratives, meeting minutes, and project memorandums., • Collaborate with other engineering leads to schedule resource and QA/QC peer reviews., • Independently conduct field condition assessments., • Performance of bid and construction phase services including responding to bidder questions, responding to contractor requests for information, and submittal reviews, site visits, and verifying change order documentation., • A current, valid driver's license is required., • Professional Engineering License preferred. P.E. license in multiple states is a plus., • Applies thorough knowledge of current principles and practices of engineering related to the variety of aspects affecting their practice., • Applies progressively acquired expertise to resolve crucial issues and/or unique conditions., • Keeps informed of new methods and developments affecting their practice and recommends new practices or changes in emphasis of projects., • Leads projects of moderate complexity and scope or leads a major project., • Analyzes complex problems across specialty areas appropriate to the practice of engineering., • Occasionally serves as the technical advisor for the practice in the application of advanced concepts and methods in an assigned area., • Keeps informed of new developments and requirements affecting the practice for the purpose of recommending changes in projects or applications., • Occasionally develops new techniques and/or improved processes, materials, or products., • Occasionally plans, schedules, and coordinates the preparation of documents or activities for multiple major projects or is responsible for an entire project of a practice., • Analyzes project management plans for complex engineering projects., • Understands project delivery uncertainties and uses risk management principles to address them., • Supervises a staff of engineers and technicians., • Receives administrative supervision with assignments given in terms of broad general objectives and limits., • Provides continued mentored experience to senior staff., • Applies principles of formal strategic and persuasive communications., • Represents their area of specialty within the practice and liaises with related individuals and practices., • Routinely interacts with practice leaders, clients, officials, contractors, and others. GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore anarray of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative teamthat'scommitted to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Marketbased, competitive compensation, • Medical, dental, and vision plans, • Companypaid short-term and long-term disability, • Companypaid life insurance, • Generous paid time off + 7 paid holidays, • Anadditionalfloating holiday-use it for what matters to you, • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationBachelors (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

GAI Consultants Inc is seeking a Senior Civil Project Designer 1 to join their team. In this position, you will interpret, organize, execute, and coordinate assignments. Serve as a task manager for projects, as well as a technical Specialist. This position is eligible for GAI's flexible Hybrid workplace place/Telework Policy. This position will be based out of any of our offices. GAI's Power Business Unit focuses on developing and supporting Energy, Institutional, Industrial, and Manufacturing clients. #INDHP Qualifications: • Advanced level of skills. Strives to become proficient in aspects of the Civil 3D., • Seeks to advance their knowledge of project design development, advanced grading tools, corridor, and alignments., • Experience in mass grading and linear projects., • Stays current on software updates and advises based on technical changes., • Ability to work indoors in professional office settings., • Ability to sit for extended periods while performing computer-based tasks., • Frequent use of hands and fingers for typing, writing, and handling office equipment., • Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work., • Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings., • Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance., • Adequate hearing to participate in conversations, phone calls, and virtual meetings., • Provides advisement on scopes, budgets, and schedules for work to be completed; works with other project leadership to complete their assigned tasks; maintains GAI's procedures and protocols. GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore anarray of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative teamthat'scommitted to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Marketbased, competitive compensation, • Medical, dental, and vision plans, • Companypaid short-term and long-term disability, • Companypaid life insurance, • Generous paid time off + 7 paid holidays, • Anadditionalfloating holiday-use it for what matters to you, • 401(k) with company match, • Tuition reimbursement, • Support and rewards for professional development and certifications EducationAssociates of Drafting (preferred) Licenses & CertificationsDriver's License (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview The Crew Chief I is responsible for the overall execution of daily assigned project tasks. This position supervises survey crew employees, ensuring all work is completed efficiently and successfully, all while following established McAdams's guidelines for field work delivery. Key Responsibilities • Knowledgeable of the various disciplines of construction staking / surveying and accurately and effectively perform required tasks during a project, • Ensures field crew daily tasks are performed accurately and efficiently through the various project stages following McAdams's guidelines and company standards, • Read and interpret construction plans that include storm drainage, sewer tables, check pipe slopes/grades, contour interpolation, straight grading, and compute vertical curves for profile grade checks, • Identify potential plan, computation, and constructability issues, • Demonstrate an ability to perform Boundary, Topographic, ALTA and other various types of surveys with limited or no instruction, • Plan projects to be performed in the most efficient and accurate way possible and seeing the big picture for project execution, • Proactively communicates with group management regarding project status and/or issues, • Assist with maintenance of vehicles, equipment, and work sites, • Responsible for assessing potential hazards and unsafe working conditions, • Aids in maintaining a safe and respectful work environment by following company policies and procedures, • Follow guidelines and company standards set forth for the Geomatics department, • Act as the company representative in the field during client interactions, • Communicates respectfully with clients and / or project neighbors to insure a positive company image, • Executes JHA's, participates with pre and post job briefs, • Provides clear and concise direction to fellow crew members and ensure crew members perform daily tasks, • Defuse contentious situations that may arise from interaction with client or project neighbors, • Assist with maintenance of vehicles, equipment, and work sites, • Mentors and trains Junior Crew Chief members, • Prepares field notes that meet the McAdams standards and manages field data files in a manner that they can be easily interpreted and cyphered by office support staff, • High school diploma or GED, • Demonstrate core competencies of the Instrument Operator Level II, • Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics, • Punctual and dependable Hardworking and detail-oriented, • Successful completion of a functional assessment, • Must have a valid driver's license, • The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions., • Work will primarily be outside with varying environmental conditions., • Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites., • Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally., • Must be able to stand up or walk between 8-12 hours a day. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Kennedy Jenks is seeking a detail-oriented, service-driven Civil Engineer with a focus on water and wastewater projects. Experience with site design (layout, grading, drainage) and water/wastewater piping design preferred.

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 3-5+ years of professional experience, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 3-5+ years of professional experience, • MD Degree, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job Description Workplace Type: Hybrid About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As a Lead Engineer, you will primarily support our Civil Department with land development and civil engineering practices for electrical substations and transmission line right-of-way. This role will also play a pivotal part in developing and growing our Civil Department in other regional offices. What You Will Be Doing: * Oversight of electrical substation civil design including permitting support, site layout, grading design, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support * Review civil construction specifications, cost estimates, engineering proposals, and project schedules * Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection * Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design * Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion What You Bring: * Bachelor’s in Engineering (required) * Professional Engineer (PE) certification (required) * 10+ years of related engineering experience, whether through consulting or working for an electric utility (required) * Project management experience (preferred) * Extensive knowledge of the fundamentals of managing project scopes, schedules, and budgets * Experience in civil design work experience related to: 69kV/115kV/138kV/230kV/345kV/500kV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing (highly preferred) * Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs) * Understanding of basic practices for evaluating engineering and design issues * Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly * Ability to work in a safe manner and always obey safety regulations * Effective communication skills (verbal, written, and presentation) * Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders * Ability to use a collaborative approach when working with peers or clients * Demonstrate a high level of comfort with sharing knowledge freely * Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects * Strong attention to detail and ability to work in a team environment &/or independently * Ability to think creatively as it relates to engineering innovation and solutions * Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment * Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy So...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • VTO (Volunteer Time Off) of 4 hours each year (prorated during first year based on hire date), • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description Workplace Type: Hybrid About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As the Civil Engineering Manager, you will primarily support our Civil Department with land development and civil engineering projects for electrical substations and transmission line right-of-way. This role will also play a pivotal part in developing and growing our Civil Department in other regional offices. What You Will Be Doing: • Manage all aspects of civil design including permitting support, site layout, grading design, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support, • Development of civil construction specifications, cost estimates, engineering proposals, and project schedules, • Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection, • Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design, • Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion, • Act as our “brand ambassador”, passionately representing our company both internally and externally, • Mentor Civil team members on the design and analysis of civil engineering concepts and software, • Manage Civil department resources and workload though project assignments, project updates, and (at a minimum) biweekly department meetingWhat You Bring:, • Bachelor’s degree in Engineering (required), • Professional Engineer (PE) certification (required), • 15+ years of related engineering experience, whether through consulting or working for an electric utility (required), • Project management experience (preferred), • Knowledge of the fundamentals of managing project scope, schedule, and budget, • Experience in civil design work experience related to: 69kV/115kV/138kV/230kV/345kV/500kV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing, • Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs), • Understanding of basic practices for evaluating engineering and design issues, • Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly, • Ability to work in a safe manner and always obey safety regulations, • Effective communication skills (verbal, written, and presentation), • Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders, • Ability to use a collaborative approach when working with peers or clients, • Demonstrate a high level of comfort with sharing knowledge freely, • Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects, • Strong attention to detail and ability to work in a team environment and/or independently, • Ability to think creatively as it relates to engineering innovation and solutions, • Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • VTO (Volunteer Time Off) of 4 hours each year (prorated during first year based on hire date), • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance (Employed paid), • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionJob Summary We are seeking one to two experienced Concrete finishing Worker to lead field crews on flatwork and structural concrete projects. The ideal candidate is highly skilled, self-sufficient, and capable of managing crews, schedules, and quality standards on-site. Preference will be given to foremen who can bring established crews. Key Responsibilities • Supervise and lead concrete crews on job sites., • Oversee flatwork and curb construction, including layout, forming, pouring, finishing, and curing., • Manage structural concrete projects, including:, • Inlets, • Walls, • Headwalls, • Box culverts, • Other site and drainage structures, • Read and interpret blueprints, construction drawings, and specifications., • Coordinate daily activities, materials, equipment, and manpower., • Ensure projects are completed on schedule and within quality standards., • Maintain job site safety in compliance with OSHA and company policies., • Communicate effectively with project managers, subcontractors, and inspectors., • Perform layout and grading verification as needed., • Troubleshoot field issues and make real-time decisions to maintain progress. RequirementsQualifications • Proven experience as a Concrete Foreman (flatwork and structural required)., • Strong leadership skills and ability to manage a crew efficiently., • Ability to read and interpret blueprints and project plans., • Knowledge of forming systems, finishing techniques, and structural concrete practices., • Experience with drainage structures and DOT-related work preferred., • Self-motivated and capable of working independently., • Valid driver’s license required., • Ability to bring an established crew (preferred). BenefitsCompensation & Benefits • $1,700 – $2,000 per week (based on experience and skill level), • $2,000/week for highly skilled, self-sufficient foreman, • Company truck, • Fuel card, • Company phone, • iPad, • Standard company benefits package

Job DescriptionSalary: Position Summary: The CAD designer uses technology to develop detailed civil construction plan for various land development projects for commercial, residential, and municipal sectors. These designs include plans for site, utilizes, grading, and storm water layout and design, from the beginning stages through final construction plans. Responsibilities & Duties: • Design and develop detailed civil construction plans for various land development projects in the commercial, residential, and municipal sectors., • Design and analyze engineering systems related to land development and utilities, • Development and delivery of calculations for site grading, establishment of utilities and roadways requirements for translation into working drawings, • Use software to create detailed 2D or 3D designs for complex projects., • Collaborate with others to establish timelines and budgets, as well as solve problems., • Stays abreast of industry trends and standards, best practices and software technology changes., • Analyze situational data and come up with creative solutions., • Assures integrity of AutoCAD data files created. Knowledge, Skills & Abilities: • Ability to set up and manage AutoCAD drafting and plan preparation in accordance with established standards with minimal direction., • AutoCAD Civil 3D knowledge (surfaces, earthworks, profiles, sections)., • Ability to perform basic calculations (slopes, grades, etc.)., • Proficiency with Microsoft Office and Adobe Acrobat., • Ability to work independently and with a team., • Strong interpersonal skills with the ability to communicate across teams and levels., • High attention to detail and self-started with the ability to multi-task. Qualifications: • Associates degree in CAD or related field of study preferred., • Technical training certification in AutoCAD/Drafting., • Single, Family, and Master Planned Development Experience Strongly PREFERRED., • Minimum of 1-3 years of previous experience REQUIRED., • Previous Land Development Experience A PLUS. Physical Demands: The physical demands section should detail the physical abilities for the role with or without accommodation. • Must be able to sit and stand for long periods of time., • Ability to lift a minimum of 10 lbs. Heidt Design, LLC offers competitive salary commensurate with skills and experience. This position is eligible for the following benefits: • Medical, • Dental, • Vison, • Short-term Disability, • Long-term Disability, • Life Insurance, • 401(k) with company match, • Paid time off (PTO), • Bereavement, • Tuition Reimbursement Package, • Happy Hour Friday's - Unique Culture and Family Orientated, • Holiday and Heidt Anniversary Parties, • Birthday recognition at the end of each month, • Happy Hours throughout the year and special events, • Weekly office breakfast (Typically twice a week), occasional lunches, and so much more!

Job DescriptionJob Summary We are seeking one to two experienced Concrete Foremen to lead field crews on flatwork and structural concrete projects. The ideal candidate is highly skilled, self-sufficient, and capable of managing crews, schedules, and quality standards on-site. Preference will be given to foremen who can bring established crews. Key Responsibilities * Supervise and lead concrete crews on job sites. * Oversee flatwork and curb construction, including layout, forming, pouring, finishing, and curing. * Manage structural concrete projects, including: * Inlets * Walls * Headwalls * Box culverts * Other site and drainage structures * Read and interpret blueprints, construction drawings, and specifications. * Coordinate daily activities, materials, equipment, and manpower. * Ensure projects are completed on schedule and within quality standards. * Maintain job site safety in compliance with OSHA and company policies. * Communicate effectively with project managers, subcontractors, and inspectors. * Perform layout and grading verification as needed. * Troubleshoot field issues and make real-time decisions to maintain progress. Qualifications * Proven experience as a Concrete Foreman (flatwork and structural required). * Strong leadership skills and ability to manage a crew efficiently. * Ability to read and interpret blueprints and project plans. * Knowledge of forming systems, finishing techniques, and structural concrete practices. * Experience with drainage structures and DOT-related work preferred. * Self-motivated and capable of working independently. * Valid driver’s license required. * Ability to bring an established crew (preferred). Compensation & Benefits * $1,700 – $2,000 per week (based on experience and skill level) * $2,000/week for highly skilled, self-sufficient foreman * Company truck * Fuel card * Company phone * iPad * Standard company benefits package

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 2-4+ years of professional experience, • Master's Degree in English is required, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 2-4+ years of professional experience, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job DescriptionJob Summary We are seeking one to two experienced Concrete finishing Worker to lead field crews on flatwork and structural concrete projects. The ideal candidate is highly skilled, self-sufficient, and capable of managing crews, schedules, and quality standards on-site. Preference will be given to foremen who can bring established crews. Key Responsibilities • Supervise and lead concrete crews on job sites., • Oversee flatwork and curb construction, including layout, forming, pouring, finishing, and curing., • Manage structural concrete projects, including:, • Inlets, • Walls, • Headwalls, • Box culverts, • Other site and drainage structures, • Read and interpret blueprints, construction drawings, and specifications., • Coordinate daily activities, materials, equipment, and manpower., • Ensure projects are completed on schedule and within quality standards., • Maintain job site safety in compliance with OSHA and company policies., • Communicate effectively with project managers, subcontractors, and inspectors., • Perform layout and grading verification as needed., • Troubleshoot field issues and make real-time decisions to maintain progress. RequirementsQualifications • Proven experience as a Concrete Foreman (flatwork and structural required)., • Strong leadership skills and ability to manage a crew efficiently., • Ability to read and interpret blueprints and project plans., • Knowledge of forming systems, finishing techniques, and structural concrete practices., • Experience with drainage structures and DOT-related work preferred., • Self-motivated and capable of working independently., • Valid driver’s license required., • Ability to bring an established crew (preferred). BenefitsCompensation & Benefits • $1,700 – $2,000 per week (based on experience and skill level), • $2,000/week for highly skilled, self-sufficient foreman, • Company truck, • Fuel card, • Company phone, • iPad, • Standard company benefits package

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 3-5+ years of professional experience, • Master's Degree in Microbiology, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job Description Adjunct instructors are primarily responsible for instruction and classroom/student maintenance. Position Requirements: • 3-5+ years of professional experience, • Attend a weekly feedback meeting with assigned EU administrator (Dean of Academic Affairs, Academic Advisor, or Program Director) to review student and classroom issues, • Maintain accurate attendance (daily and weekly), • Make phone calls to students who have been absent, • Review and administer pre- and post-testing in all appropriate courses, • Administer required surveys and assessments in all appropriate courses, • Notify registrar of changes in roster, • Prevent "do not admit" students from entering class until cleared, • Maintain an accurate and fair grading scheme for each student, • Adhere to all University policies, rules, and regulations, • Maintain formal, neat, legible, accurate, and organized course syllabi, • Update attendance daily and grades weekly; ensure any physical student records of attendance and grades remain on campus in the designated area, • Conduct class according to scheduled times, • Prevent excessive breaks, • Avoid dismissing classes early, • Arrive at the University 20 minutes before the start of class fully prepared for each session, • Be available to students 15 minutes prior to the beginning of class session for questions and advising, • Submit grades no later than Monday 5pm EST following the end of each term, • Ensure that students adhere to University Policy, • Attend, if possible, graduation ceremonies, • Maintain classrooms in a clean and orderly manner, • Motivate, encourage, and assist students with academic issues and class attendance, • Maintain current and accurate information related to the subjects taught, • Complete annual professional development plans, • Tutor students as necessary, • Abide by all State, Federal, and/or University laws and rules pertaining to safety, health, and conduct

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview The Survey Technician partners with the Professional Land Surveyor on a diverse range of responsibilities to ensure the successful execution of land survey projects. The role requires the preparation of comprehensive survey documents, including detailed maps, plats, and precise boundary descriptions, utilizing industry-standard software such as AutoCAD, Carlson Survey, and Civil 3D, alongside Microsoft Office Suite. The technician will maintain meticulous records of survey data and field notes, ensuring project documentation is organized and accessible. Additionally, the role involves assisting with the preparation of daily field packages and managing field work schedules to optimize team efficiency. The Survey Technician II works closely with the manager when completing assigned tasks. Key Responsibilities • Prepares a variety of survey documents per applicable state and local municipality standards (i.e. ALTA/NSPS Land Title Survey, Existing Conditions, topographic, plats, etc.) and obtain basic information from these maps upon request, • Independently writes legal descriptions for survey documents, • Performs land records research and has knowledge of different governmental offices and the records they maintain, • Compiles deeds and plats into a deed sketch, • Assist with staking computations, and possess a general knowledge of construction staking principles and stake markings, • Assist in preparation of field crew packages and point maps, • Responsible for escalating potential hazards and unsafe working conditions, • Maintains good client relations to foster and perpetuate a long-term relationship, • Represents McAdams in the field with professional image through proper conduct and presentable appearance, • Follow guidelines and company standards set forth by the Geomatics department, • High School Diploma or GED, • BS or associate's degree with emphasis on Surveying, Geomatics or Computer Aided Drafting and/or have achieved certification as an NSPS CST Level II preferred, • 2-5 years of work experience in surveying, • General knowledge of geometry, coordinate geometry, trigonometry and basic Land Surveying fundamentals and computations, • Possess a strong technical knowledge of AutoCAD, Carlson survey and Civil 3D software, along with Microsoft Office, • Able to generate a surface model from survey data sets and understand the principals of interpolating elevations, • Ability to read and interpret DOT Right-of-Way plans, site plans, grading plans, utility plans and profiles, horizontal and vertical curves, foundation plans, and architectural plans, • Able to take direction and execute with accuracy and thoroughness, • Communicate and work well with others, • Must have a valid driver's license, • Successfully pass a motor vehicle records check, drug test, and functional assessment, • The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions., • Work will primarily be outside with varying environmental conditions., • Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites., • Work will also include working with fingers by picking, pinching, typing, and grasping often with repetitive motion., • Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally., • Must be able to stand up or walk between 8-12 hours a day., • Weekend and overtime and/or overnight work and travel may be required., • Additional physical duties may be required as necessary. McAdams is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard for race, color, religion, gender (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran's status, or any other legally protected status. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job Description McAdams is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina, South Carolina, Texas, and Florida. We seek to partner with our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring experiences to the forefront of everything we do, and to do that takes special people. Position Overview The Project Manager leads and oversees all phases of civil engineering projects, ensuring successful delivery from design through construction. This role is responsible for managing project teams, maintaining client relationships, and ensuring that projects are completed on time, within budget, and to the highest technical standards. The Project Manager coordinates design efforts, manages resources, handles permitting and regulatory compliance, and ensures quality control across all deliverables. Additionally, the role involves business development, risk management, and mentoring junior staff, contributing to the growth and success of the firm. Key Responsibilities • Lead and manage all aspects of civil engineering projects, ensuring successful delivery from concept through construction administration. Serve as the primary point of contact for clients, stakeholders, and internal teams, driving alignment on project goals, timelines, and budgets, • Develop and maintain strong client relationships by providing exceptional service, managing client expectations, and ensuring project satisfaction. Identify and pursue opportunities for repeat business and referrals, • Oversee and mentor project teams, providing guidance, support, and direction. Foster a collaborative environment, ensuring clear communication and smooth coordination between design staff, subconsultants, and other project team members, • Direct and support the design of civil engineering systems, including site plans, utility plans, stormwater management, grading, and infrastructure layouts. Ensure designs meet all technical, regulatory, and quality standards., • Develop, manage, and track project budgets and schedules, ensuring projects are completed on time and within budget. Allocate resources effectively to meet project deadlines and address any potential issues proactively., • Lead permitting efforts, working with local agencies and municipalities to ensure timely approvals and compliance with applicable regulations. Address agency comments and facilitate site permitting processes, • Identify and mitigate project risks, resolving any technical or design challenges promptly. Proactively address issues that may impact project timelines, budgets, or client relationships, • Ensure the quality of all project deliverables, conducting regular reviews of design documents, construction drawings, reports, and specifications to maintain accuracy and compliance with company standards, • Manage relationships with external subconsultants, contractors, and vendors, ensuring their deliverables meet project requirements and timelines. Collaborate with these parties to ensure seamless project execution, • Actively contribute to business development efforts by identifying potential project opportunities, drafting proposals, and participating in client presentations. Develop strategies to expand the firm's presence in the market., • Carries out supervisory responsibilities for staff in accordance with the Firm's policies and applicable laws (plans, assigns, and directs work; performance appraisals; rewarding of employees; addresses complaints and resolves problems), • Provide mentorship to junior project managers, engineers, and staff, helping to develop their technical and project management skills. Share knowledge and promote continuous learning across the team., • Prepare and present project updates to stakeholders, including progress reports, budget status, and risk assessments. Maintain accurate project documentation for internal and client reference., • Four-year bachelor's degree from an accredited program in Civil Engineering, Environmental Engineering, Biological and Agricultural Engineering, Civil Engineering Technology, or related field required, • EI required; PE or on track to obtaining PE strongly preferred, • Minimum of 5+ years' experience in civil site design or related field required, • Proficiency in Civil 3D, AutoCAD, and other relevant design and project management software. Strong understanding of civil engineering design principles and construction processes., • Excellent ability to manage budgets, schedules, and resources. Experience with risk management and problem-solving., • Strong written and verbal communication skills, with the ability to lead meetings, present information, and interact with clients and stakeholders., • Ability to lead teams, mentor junior staff, and foster a collaborative work environment. The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions. • Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions., • Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion., • Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time., • Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally., • Additional physical duties may be required as necessary. McAdams is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard for race, color, religion, gender (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran's status, or any other legally protected status. If you need assistance with our online application system process, please contact the Human Resources Team at 919.361.5000 or . Please read these notices for important information regarding applying for work with McAdams. • Know Your Rights: Workplace Discrimination is Illegal, • E-Verify (English/Spanish), • Right to Work (English/Spanish)

Job Description Northbridge University Nursing Program is seeking a highly motivated and qualified Anatomy and Physiology Faculty member to join our team. The Anatomy and Physiology Instructor will be responsible for developing and delivering engaging and informative courses in both online and on-campus formats. This position requires the ability to teach complex biological concepts related to the structure and function of the human body effectively. The ideal candidate will be a skilled communicator with a dedication to fostering a positive and inclusive learning environment for students from diverse backgrounds. Location: Tampa Campus - On-site Only Minimum Requirements: • Bachelor's degree completed in Biology, Anatomy, Physiology, or a closely related field., • Minimum two years of experience teaching human anatomy and physiology at the college level., • Require exceptional computer skills using Microsoft Office applications, Adobe and familiar with information systems; available to deliver the course using diverse resources; strong verbal and written communication skills. Responsibilities: • Develop and deliver engaging and effective instruction in assigned nursing courses, ensuring alignment with program curriculum, learning outcomes, and best practices., • Utilize diverse teaching methodologies including lectures, case studies, simulations, group discussions, and other innovative techniques., • Facilitate clinical learning experiences, providing ongoing mentorship and guidance to students in developing essential clinical skills and judgment., • Continuously evaluate and improve teaching methods and course content based on current evidence, student feedback, and program goals., • Participate in program development activities, including curriculum review, assessment development, and policy development., • Stay current with evolving trends in nursing practice, healthcare, and nursing education through ongoing professional development activities., • Maintain a positive and professional demeanor, fostering a supportive learning environment for students and colleagues., • Contribute to the department and university community through service activities and committee work., • Compliance with FTC and standard safety and OSHA10 guidelines., • Maintain lab, supplies, equipment. Instructors assigned to facilitate courses in an Online or Blended modality must: • Access their email accounts daily and keep up to date with any announcements or reminders of important events. Answer daily the messages in the inbox, announcements section or emails from students., • Review and update course material to include instructor’s contact information, biography, activities calendar, due dates, availability of the tests, course content, external links, create welcome announcements, update class ‘schedule of meeting days, and publish course by due date in collaboration with the Program Director, Dean of Academic Affairs, and the Instructional Design department., • Work the schedule provided for blended classes to include teaching 50 % on-ground and 50% on campus to assist students and maintain office hours to manage class, respond to messages, grade, and other academic or administrative duties related to the course., • Create a weekly introduction to the module in the LMS for Blended courses via the Announcement section., • Actively participate in Discussion Boards by creating the first discussion forum entry for each discussion, monitoring the answers, and writing a comment for every five (5) student comments., • Create a personalized message through the Gradebook for the students who have not completed the activities., • Calculate the grades on the Gradebook within five (5) days after being submitted by the students and provide timely and substantive feedback., • Evaluate and provide evidence of the student’s academic progress through the administration and grading of the evaluation assignments. The faculty member will have five days after the due date of the assignments to grade it and provide substantive feedback to the student. Benefits: • Medical Coverage -Including additional options HSA, FSA, and Dependent Health Care, • Dental/Vision Insurance Coverage, • 12 Paid Holidays / Paid Time Off / Paid Volunteer Day, • 401[k] with 50% Employer Matching, • Short-Term Disability Life Insurance, • Supplemental Life Insurance Options, • Growth Opportunities / Education Assistance and Professional Development Benefits No Cost Benefits: • Group Life Insurance, • Long Term Disability, • Talent Referral Program, • TicketsatWork - Discount Entertainment Program, • Enjoy a paid day off on your birthday (available to full-time employees after two years) Why Join Northbridge University? At Northbridge University, you become part of a community devoted to academic excellence, innovation, and human development. Every employee, from faculty to administrative staff, plays a key role in advancing the growth of our students while enhancing their own professional journey. We foster a culture of teamwork, respect, and ongoing learning, where innovative ideas are welcomed and talent is supported. Our employees enjoy professional growth opportunities, career stability, and the satisfaction of contributing to an organization that changes lives through education. At Northbridge University, you’re not just building a career—you’re creating a meaningful purpose. For additional information on who we are – Northbridge University is an Equal Opportunity/Affirmative Action Employer and does not discriminate based on race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state, or local law. The selected applicant will undergo a background check, educational verification, and drug testing.

Job DescriptionSalary: Dependent on Skillset & Experience Position Summary The Senior CAD designer uses technology to develop detailed civil construction plan for various land development projects for commercial, residential, and municipal sectors. These designs include plans for site, utilizes, grading, and storm water layout and design, from the beginning stages through final construction plans. Responsibilities & Duties • Design and develop detailed civil construction plans for various land development projects in the commercial, residential, and municipal sectors., • Design and analyze engineering systems related to land development and utilities, • Development and delivery of calculations for site grading, establishment of utilities and roadways requirements for translation into working drawings, • Use software to create detailed 2D or 3D designs for complex projects., • Collaborate with others to establish timelines and budgets, as well as solve problems., • Stays abreast of industry trends and standards, best practices and software technology changes., • Analyze situational data and come up with creative solutions., • Assures integrity of AutoCAD data files created. Knowledge, Skills & Abilities • Ability to set up and manage AutoCAD drafting and plan preparation in accordance with established standards with minimal direction., • AutoCAD Civil 3D knowledge (surfaces, earthworks, profiles, sections)., • Ability to perform basic calculations (slopes, grades, etc.)., • Proficiency with Microsoft Office and Adobe Acrobat., • Ability to work independently and with a team., • Strong interpersonal skills with the ability to communicate across teams and levels., • High attention to detail and self-started with the ability to multi-task. Qualifications • Associates degree in CAD or related field of study (preferred and encouraged)., • Technical training certification in AutoCAD/Drafting., • Minimum of 4 years of previous experience REQUIRED., • Previous Land Development Experience REQUIRED., • Previous Single, Family, and Master - Planned Development (Experience Preferred). Physical Demands The physical demands section should detail the physical abilities for the role with or without accommodation. • Must be able to sit and stand for long periods of time., • Ability to lift a minimum of 10 lbs. Heidt Design, LLC offers competitive salary commensurate with skills and experience. This position is eligible for the following benefits: • Medical, • Dental, • Vison, • Short-term Disability (Company paid), • Long-term Disability, • Life Insurance, • 401(k) with Company Match, • Paid time off (PTO), • Bereavement, • Tuition Reimbursement Package, • Happy Hour Friday's - Unique Culture and Family Orientated, • Holiday and Heidt Anniversary Parties, • Birthday recognition at the end of each month, • Happy Hours throughout the year and special events, • Weekly office breakfast (typically at least twice a week), occasional lunches, and so much more!

Job Description We are seeking a strategic and hands-on Real Estate Development Manager / Development Project Manager to lead the planning, design, entitlement, and execution of complex real estate development projects—including large-scale mixed-use and commercial assets. This role requires a versatile professional with a strong background in both project management and real estate development. This individual will serve as the key liaison between ownership, capital partners, public agencies, and all project stakeholders—ensuring developments are financially viable, technically sound, and aligned with long-term strategic goals. • Bachelor’s degree in real estate, construction management, finance, engineering, architecture, or related field, • Minimum 5-10 years of experience in development project management or commercial real estate development, • Strong working knowledge of zoning, entitlements, permitting processes, and design coordination, • Proficiency in project and financial modeling tools (Excel, Procore, MS Project, etc.), • Demonstrated ability to manage multiple complex projects simultaneously, • Skilled in managing consultants, legal advisors, public agencies, and capital stakeholders, • Familiar with budgeting, value engineering, and development risk assessments, • Excellent communication, negotiation, and leadership skills Requirements • Bachelor’s degree in real estate, construction management, finance, engineering, architecture, or related field, • Minimum 5-10 years of experience in development project management or commercial real estate development, • Strong working knowledge of zoning, entitlements, permitting processes, and design coordination, • Proficiency in project and financial modeling tools (Excel, Procore, MS Project, etc.), • Demonstrated ability to manage multiple complex projects simultaneously, • Skilled in managing consultants, legal advisors, public agencies, and capital stakeholders, • Familiar with budgeting, value engineering, and development risk assessments, • Strategic Planning & Execution, • Financial Modeling & Budget Oversight, • Risk & Site Constraint Mitigation, • Public Agency & Stakeholder Engagement, • Entitlement & Permitting Coordination, • Vendor & Contractor Management, • Market Research & Deal Structuring Medical, Dental, 401k PTO ETC

Nucor is North America's largest recycler and most diversified steel and steel products company.Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.NIGHT SHIFT:

Coca-Cola Beverages Florida - - Responsibilities: Operate industrial power equipment; Restock and replenish as appropriate; Perform general maintenance; Fill in for other positions as needed; Maintain orderly and clean work area.

MasTec - - Responsibilities: Operate heavy construction equipment (excavator, bulldozer, loader, etc.Perform pre-start inspections, post-start inspections, and daily safety checks; Conduct safety and operational inspections and minor repairs on equipment; Communicate damages or mechanical issues to

Nucor - - Responsibilities: Operate heavy equipment including cranes, loaders, and similar machines safely and efficiently; Load scrap material onto shredder feed conveyors, push shred piles, move material throughout the yard, and load trucks and railcars; Perform daily equipment inspections and r

Headquartered in Tampa, Florida, and with offices throughout Florida, Preferred Materials - Asphalt Division performs asphalt paving, grading, and related roadway services.

Nucor - - Responsibilities: Follow all company and OSHA safety procedures attend safety meetings and look out for yourself and your teammates; Operate heavy equipment including cranes, loaders, and similar machines safely and efficiently; Load scrap material onto shredder feed conveyors, push shr

MCS is hiring for a Fire Alarm Project Manager in Tampa, FL.This is a full-time, permanent position with benefits.The Fire Alarm Project Manager must demonstrate the ability to ensure projects are planned and completed.The Fire Alarm Project Manager will require good communication skills and the abi

Maintenance Of Traffic Position.The Maintenance of Traffic (MOT) position in Fort Pierce, FL, is critical to ensuring the safe and efficient flow of vehicular and pedestrian traffic around construction zones, road maintenance projects, and other temporary traffic control situations.The primary goal