Trabajos health and safety manager en Buffalo, New YorkCrear alertas

Job Description About CVM Electric CVM Electric is a fourth-generation, family-owned electrical contracting firm serving the Western New York region since 1919, delivering commercial, industrial, and residential electrical solutions across the full spectrum of construction and service work. We trust our Foremen to own their job sites, and we back them up with the resources, team, and leadership support to do it right. The Role The Foreman at CVM Electric is the on-site leader responsible for keeping field operations running at peak performance. This is a working lead position, you’ll be in the field every day alongside your crew while taking full ownership of the job from the ground up. You’ll direct sub-foremen, electricians, and apprentices, manage the job site day-to-day, and serve as the direct link between the crew and the Project Manager. Strong field experience, proven crew leadership, and the drive to hold the standard on every site you run are what this role demands. What You’ll Do • Direct and coordinate the daily work of sub-foremen, electricians, apprentices, and helpers on commercial and industrial job sites, • Assign tasks, set daily priorities, and keep the job on schedule, • Perform and oversee installation of conduit systems, MC cable, wire, panels, switchgear, and devices per NEC and project specifications, • Install and terminate large electrical services, utility transformers, and generators, • Read and interpret blueprints, schematics, and single-line diagrams, • Troubleshoot electrical faults and determine corrective action efficiently, • Coordinate with general contractors, other trades, and inspectors, • Manage materials, tools, and equipment on site; communicate needs to the Project Manager, • Complete daily work reports, timesheets, and required site documentation, • Mentor and develop apprentices and journeyman electricians on trade techniques and safety What We’re Looking For • 5+ years of commercial and/or industrial electrical field experience, • 1–2 years in a working lead or foreman capacity directing a crew of 2 or more, • Demonstrated ability to manage a job site from start to finish, • Strong working knowledge of NEC and local electrical codes, • Ability to read blueprints, schematics, and single-line diagrams, • NY State Journeyman or Master Electrician License preferred, • OSHA 30 required within 90 days of hire, • Existing relationships with GCs, developers, or property owners in WNY a plus Why CVM We take care of the people who keep that legacy going. We offer a comprehensive benefits package including health and dental insurance, paid time off that grows with your tenure, paid holidays, 401(k), and a profit-sharing program. Field team members also earn a tool and boot allowance. This is a company where your experience is respected, your growth is supported, and long-term careers are the norm. CVM Electric is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.

Job Description Express Employment Professionals is recruiting for a Production Operator, on behalf of a manufacturing company located in Buffalo, NY. This company specializes in engineered mobility components and safety systems for defense, security, and commercial vehicles. This is an excellent temp-to-hire opportunity! Payrate: $17/hr 1st Shift: Mon-Thurs, 6:00am – 4:30pm 2nd Shift: Mon-Thurs, 3:30pm – 2:00am Summary The Production Operator is responsible to effectively operate the equipment to which they are assigned, safely and efficiently. They must use any provided equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Job Duties: • Sand, deburr, file, polish and perform other functions by hand as required to produce a quality finished product., • Start up and shut down equipment in a safe manner, report issues to immediate manager., • Read and understand the work instructions and engineering drawings/prints required for the assigned job., • Use measuring devices required to ensure a quality product is being produced., • Meet production rate requirements set by Engineering/APU., • Accurately label parts with any required markings., • Perform 100% visual inspections on all parts processed., • Report defective parts as scrap and report excessive scrap issues to immediate manager., • Maintain machine maintenance levels to ensure machine operations such as filling lube oil, hydraulic oil, and/or coolant levels., • Handle basic tool changes., • Ability to use or learn to use a computer to look up documents, request assistance from other departments and managers, and enter production information., • Ability to accurately complete the paperwork requirements for each operation., • Responsible for training new employees as requested by immediate manager., • Must keep work area clean, neat, and orderly. Perform general housekeeping functions daily as required to maintain a safe and clean work environment., • Communicate professionally with everyone in the plant., • Follow instructions from the Shift Leader, APU Manager, or Production Manager., • Work overtime as required., • Fill in or cross train in other departments as assigned., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Qualifications: • Previous experience working in a manufacturing environment is preferred., • Ability to read and understand manufacturing work instructions and drawings is preferred., • Ability to use measurement devices is required., • Basic math skills are required., • Good communication skills are required., • Ability to lift 50 pounds on a regular basis, multiple times an hour., • Must be able to work in a non-air-conditioned environment for a minimum of eight hours per day. Physical Demands: • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk, and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting, and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment: The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Interested and qualified candidates are encouraged to apply directly to this posting with an updated resume. Join Express Employment Professionals and become part of a dynamic team dedicated to helping job seekers secure employment opportunities and businesses find skilled workers. Apply now to showcase your expertise and contribute to our mission of connecting people with rewarding careers! \nCompany Description Express Employment Professionals of Buffalo is a locally owned staffing agency that connects job seekers with short-term, long-term, and permanent employment opportunities across a variety of industries. As part of the global Express Employment Professionals franchise network, we help businesses find qualified talent while providing associates with meaningful work opportunities. Express Employment Professionals of Buffalo is a locally owned staffing agency that connects job seekers with short-term, long-term, and permanent employment opportunities across a variety of industries. As part of the global Express Employment Professionals franchise network, we help businesses find qualified talent while providing associates with meaningful work opportunities.

Overview: Responsible in managing, leading, coordinating, and administering multiple projects at separate locations from the conceptual stages through planning, engineering, procurement, construction, start-up, performance testing, initial operations, and prime contract close-out. Responsible for assisting Business Development in expanding current work scope, developing proposal technical and pricing strategies and preparing proposal execution strategies/plans. Also supports communications and presentations to customers. Supervises the development of budgets and schedules, manages performance, reports progress, and initiates action to assure project objectives and schedules are met and work is performed within budget and according to specifications. Resolves problems and manages the final turnover of the project to the customer. Provides leadership for the development and maintenance of a high-performance project team. Has overall management responsibility for project execution, ensuring the project is delivered within contract requirements, standards of ethics, quality and safety and to Customer and Lemartec performance expectations. The Project Director (PD), will lead a team of senior project managers, project managers, field staff and assigned support staff across various projects, and is responsible for managing those projects at a strategic level. The PD is the primary point of contact, managing the project teams, resources and financials, to ensure that the projects deliver value to stakeholders, are delivered to industry best standards of quality and safety, on schedule, on budget, and meet technical and contractual requirements required. The PD regularly reviews progress reports and acts to align the development of the project within the broader goals of the organization through staffing, financial, or other adjustments. The PD will provide coaching, guidance, direction, and leadership to the project teams in relation to various issues, risks, activities, general management and project approach. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. Company Overview Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables, and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects, and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: Supervision Received • Reports to and receives strategic project (P&L) guidance from the assigned Vice President of Strategic Operations., • Receives functional and technical guidance from the Director of Project Services. Supervision Exercised • Provides direction to assigned project reports, including senior project managers, project managers, field staff, and assigned support staff across various projects. Contacts • Acts as the principal contact for the project scope of work with Customers and Lemartec management throughout the duration of the project., • Maintains contact with management personnel from suppliers, subcontractors, and governmental agencies as appropriate., • Maintains management-level relationships with other participating entities responsible for performing services in connection with the project, including organizations in the community. Project Planning & Execution • Assists Business Development in developing win plans, preliminary project execution plans, estimating plans, proposal plans, proposals, and contract formulation., • Reviews draft prime contract and proposal documents; develops prime contract strategy and plan., • Participates in prime contract negotiations, including client/customer deliverables and schedules., • Ensures proper and clear Division of Responsibility (DOR) and integrated work processes., • Establishes an appropriate, integrated organizational structure, including off-project functional and specialist support., • Defines and communicates roles, responsibilities, and authorities to project team members and the Customer to ensure project completion safely, on budget, on schedule, and in compliance with standards and regulations., • Ensures scope, design basis, and objectives are defined, best practices/lessons learned reviewed, and detailed work plans, schedules, budgets, and procedures are established, including Project Execution Plan and Contract Management Plan., • Promotes constructability reviews during project execution. Project Monitoring & Control • Monitors and controls all contractual commitments to ensure compliance with specifications, drawings, and terms of the contract., • Implements and maintains a change management control system; ensures all Customer communications on the prime contract are documented., • Facilitates development, communication, implementation, update, and continual use of the Project Execution Plan., • Reviews and approves Project Control systems to measure progress/performance, provide early warning of deviations, and identify corrective actions., • Identifies quality requirements and ensures processes achieve contractual quality commitments; assesses customer perception of quality periodically., • Oversees the Environmental, Health & Safety program for office, field, and subcontractor activities., • Ensures design complies with applicable EH&S laws and regulations., • Oversees Document Control and Records Management; coordinates documentation and software turnover packages to the client., • Reviews and approves bid tabulations for major purchase orders, contracts, and subcontracts; approves critical changes per delegated authority., • Directs the preparation and presentation of Project Status Reports (PSR) to Lemartec management., • Monitors cash flow, informs the Customer of cash requirements, and controls budget for non-reimbursable costs., • Assists in training new project managers and personnel; establishes plans for ongoing training opportunities., • Promotes Continuous Improvement (CI) and Total Installed Cost (TIC) concepts across project teams; encourages team building., • Conducts periodic project and Customer meetings to promote communication, review progress, discuss issues, and facilitate problem resolution., • Manages documentation Project / Program Management • Manages strategic aspects of large engagements and mitigates risk., • Oversees Project Managers and managers on client engagements., • Reviews high-level deliverables across practice., • Ensures engagement reviews and quality assurance procedures occur., • Provides leadership across all assigned projects., • Develops, implements, and maintains sound business practices and strategic objectives aligned with Lemartec initiatives. Project Financial Reporting • Reports profit and loss figures; consolidates and analyzes profitability, revenue, margins, bill rates, and utilization., • Creates pipeline forecasts and broad-based financial pictures., • Addresses and resolves billing issues., • Ensures practice meets or exceeds budgeted financial objectives., • Develops and meets revenue and financial goals; negotiates contract pricing when necessary. Business Development • Provides leadership and guidance throughout the sales cycle., • Leads strategic account identification and development., • Engages Business Development as appropriate to achieve sales goals., • Manages business development at a strategic level., • Grows long-term client relationships and capitalizes on partnership opportunities. Communication • Keeps practice informed of changes and newsworthy events within Lemartec., • Communicates relevant practice information to the Director of Construction Operations., • Handles difficult personnel situations with discretion, HR advice, and respect., • Promotes Lemartec via industry conferences and local business organizations., • Technical Understanding, • Evaluates and redesigns practice offerings., • Guides clients on technical solutions. Teamwork • Reinforces a team approach on client projects and internal initiatives., • Supports and solicits input from all team levels., • Ensures regular team and practice events occur outside the office. Client Management • Communicates with clients to identify needs and evaluate business solutions., • Continuously seeks to increase customer satisfaction and deepen relationships., • Maintains lasting client relationships and resolves issues at a senior level. Innovator Development • Enforces performance evaluation and career development programs., • Guides Project Managers on career planning importance., • Creates an environment for professional growth., • Assigns tasks to managers that enable growth opportunities. Internal Operations • Reviews status reports of Project Managers; addresses issues as appropriate., • Provides expertise to internal teams and task forces., • Enforces standard policies and procedures., • Maintains knowledge of Lemartec organization, policies, QA/QC, Safety, and industry processes., • Organizes and staffs project teams effectively within a matrix organization., • Applies knowledge of front-end activities, including Best Practices, Constructability, Risk Analysis, Contingency Evaluation, and Estimate/Proposal Review Process., • Uses Lemartec standard tools and procedures for Project Controls, Financial Management (PSR, Sage), Automation, Records Management (Procore), and Root Cause Analysis., • Develops and implements project baselines: Scope Definition, Roles/Responsibilities, Estimates, Resource-Loaded Schedules, Progress/Performance Metrics, Reports, and Action Tracking., • Demonstrates business and commercial awareness, including cash flow management and conserving Lemartec capital., • Experienced in Project Execution Plan development, Continuous Improvement, Schedule Management, Prime Contract/Subcontract formulation, Risk Analysis, Negotiations, Change Control, Cost Trend Programs, Documentation Management, Insurance, and Bonding., • Possesses strong oral, written, graphic communication, and presentation skills., • Conducts effective meetings. Qualifications: Work Experience and Education Bachelor’s degree in Architecture, Engineering, or Construction Management. 15 years of experience as a Senior Project Manager on commercial and/or industrial projects. 5 years of experience as a Project Director. Knowledge, Skills, and Abilities • Ability to travel within the U.S., • Experience managing projects exceeding $250M in value., • Design-build project experience., • Experience with budget control and value engineering., • In-depth knowledge of all design disciplines, specifications, and drawings., • Proficiency in planning and scheduling using Primavera P6., • Advanced skills with Microsoft Office Suite – Excel, Word, Outlook., • Working knowledge of standard construction accounting software – Viewpoint Vista, Sage 300 CRE, etc., • Working knowledge of standard Project Management software – Procore., • Excellent communication, presentation, and interpersonal skills., • High degree of professionalism and strong work ethic., • Preferred Bilingual: English/Spanish What's in it for You Financial Wellbeing • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount Discounted National Gym Membership Network Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, and hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-SL1 #LI-ONSITE Appcast (For Export): #appyellow

Overview: Position Summary Responsible for all site activities related to construction project on jobsite to successfully complete the project on schedule, within budget and maintaining the highest quality standards. Oversee all trade and field personnel required to successfully complete the project. Duties may vary by client from project size and with varying degrees of responsibility and authority. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, up to 100% of the time. You have the potential to be placed on a project site located in various states throughout the US. (Full List : NC, VA, GA, TX, FL, IA, WY) You’ll spend 6-8 months on average per project. If eligible, we offer designated daily per diem in addition to base pay to support and help you cover living expenses and relocation assistance. If eligible, the position includes a vehicle allowance. If eligible, travel home rotation will be one weekend per month away from the jobsite. COMPANY OVERVIEW Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables, and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects, and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: • Promote and comply with all Company and safety policies and procedures, • Must be able to perform all the duties required of a Level I and II Superintendent in addition to Level III Superintendent duties, • Supervise overall direction, coordination, performance and evaluation of sub-contractors and field staff, • Coordinate and supervise construction activities., • As needed, serve as mentor and trainer for Level I and Level II Superintendents, • Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws, • Able to negotiation Change Orders, • Ensure site has proper materials ordered and scheduled inspections as necessary, • Maintain construction schedule, identify and solve problems, • Maintain an organized job site, including the construction office, • Use and maintain schedules to measure time and production to meet requirements, • Keep records in a systematic, well-organized fashion, • Ensure that proper documentation has been completed, hard copies and electronic copies maintained in a well-organized manner as defined in the scope of the project requirements, • Seek ways to improve on productivity analysis provided by Project Manager, • Ability to communicate effectively in both oral and written form to large employee groups, owners or engineers, • Maintain and enforce discipline throughout the jobsite, • Maintain a professional appearance and positive relationships with customers, contractors, suppliers and other employees, • Interview, hire, and train direct reports, plan, assign and direct work, appraise performance; reward and discipline employees, address complaints and resolve problems., • Required to travel to different jobsites on a limited notice, • Other duties as assigned Qualifications: Qualifications • Bachelor’s degree in Engineering, Construction Management or related field 10 years of work experience as a construction superintendent in lieu of a degree, 15+ years of work experience. • 5 years of experience working on Data Center project is required Knowledge/Skills/Abilities • Must have project scheduling, planning, organization, and document control, • Superior communication and organization skills, especially when managing subcontractors and inspectors, • OSHA Certification – In-depth knowledge of OSHA safety standards and procedures, • Experience with the following software: Microsoft Office Suite, Scheduling Programs, and Document Control Programs What's in it for you: Financial Wellbeing • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, and hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-SL1 #LI-ONSITE _ Protect your community by reporting fraud, scams, and bad business practices _has context menu Appcast (For Export): #appyellow

Job Description Production Operator Facility: Buffalo, NY General Description The Production Operator is responsible to effectively operate the equipment to which they are assigned, safely and efficiently. They must use any provided equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Start up and shut down equipment in a safe manner, report issues to immediate manager., • Read and understand the work instructions and engineering drawings/prints required for the assigned job., • Use measuring devices required to ensure a quality product is being produced., • Meet production rate requirements set by Engineering/APU., • Accurately label parts with any required markings., • Sand, deburr, file, polish and perform other functions by hand as required to produce a quality finished product., • Perform 100% visual inspections on all parts processed., • Report defective parts as scrap and report excessive scrap issues to immediate manager., • Maintain machine maintenance levels to ensure machine operations such as filling lube oil, hydraulic oil, and/or coolant levels., • Handle basic tool changes., • Ability to use or learn to use a computer to look up documents, request assistance from other departments and managers, and enter production information., • Ability to accurately complete the paperwork requirements for each operation., • Responsible for training new employees as requested by immediate manager., • Must keep work area clean, neat, and orderly. Perform general housekeeping functions daily as required to maintain a safe and clean work environment., • Communicate professionally with everyone in the plant., • Follow instructions from the Shift Leader, APU Manager, or Production Manager., • Work overtime as required., • Fill in or cross train in other departments as assigned., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Previous experience working in a manufacturing environment is preferred., • Ability to read and understand manufacturing work instructions and drawings is preferred., • Ability to use measurement devices is required., • Basic math skills are required., • Good communication skills are required., • Ability to lift 60 pounds on a regular basis, multiple times an hour., • Must be able to work in a non-air-conditioned environment for a minimum of eight hours per day. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk, and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting, and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionDescription: Job Title: 2nd or 3rd Shift CNC Mill Operator Department: Production Supervisor: Operations Manager- Manth FLSA Status: Non-Exempt Summary of Job: The Mill Machine Operator will be responsible for setting up, maintaining and operating Mill machines to produce precision parts that meet quality standards. The Mill Machine Operator will also be responsible for reading and interpreting blueprints, technical drawings and specifications, and working closely with other team members to ensure production goals are met or exceeded. Essential Duties and Responsibilities · Operate and maintain CNC Mill machinery from blueprints. · Work with Manufacturing Engineer on program changes to the machine, when needed. · Perform quality checks on parts for accuracy according to blueprints, and to ensure the product meets quality standards. · Identify product defects and work with QC team. · Set up tools and machinery for individual projects. · Perform all work in accordance with established safety procedures. · Follow all safety procedures and company policies. · Maintain a professional, clean and safe work area. · Other duties as assigned. Requirements: Knowledge, Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. · Mill machining experience required. · Knowledge of FANUC controls. · Knowledge of 4th axis operation, a plus. · Able to use measuring equipment such as Calipers, Micrometers, Indicators, etc. · Able to read and interpret charts, drawings and blueprints. · Knowledge of safety procedures relating to operating Grinding machinery and handling materials. · Ability to interpret, edit, and program efficiently, when required. · Must be able to follow directions and perform work accurately and thoroughly. · Ability to use thinking and reasoning to solve a problem. · Attention to detail and ability to maintain accuracy. · Strong communication skills to work as part of a team. · Machinist tools required. · High School Diploma, or GED. Physical Job Requirements and Work Environment: The safety, health and well-being of our team is our leading value! The physical demands and work environment described here are representative of those that are encountered by and must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Fast-paced production environment. · Machine shop. · Use of hearing protection, eye protection and safety shoes required. Hearing and eye protection provided. Safety shoes and prescription safety eyewear covered by reimbursement program.

Job Description Production Operator-Wheel Assembly Technician Facility: Buffalo, NY General Description The Production Operator – Wheel Assembly Technician is responsible to effectively operate the tire changer, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Install runflats in properly without damage to the wheel and tire, and without leaving any unnecessary components or tools inside the assembly., • Follow proper start up and shut down procedures when using tire install machines., • Alert immediate manager of any issues with tire install machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with a tire changer is preferred., • A reasonable level of mechanical aptitude and attention to detail is needed to properly install the runflats, in the correct sequence, using the designated tools and fixturing, without creating any quality defects. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description 2nd shift: Monday-Thursday 3:15PM-12:45AM, Friday 2:15PM-10:45PM (Every other Friday off) Summary A Production Team Assistant infuses training, development, and organizational goals into the leadership of the production floor. As a first impression to our valuable front line operators, a successful candidate will have a variety of attributes involving communication, leadership, management of workflow, safety, supervision, and technological aptitude. Essential duties and responsibilities • Demonstrate core values of organization and serve as role model for all associates., • Communicating (verbal and listening) with operators, management, process owners, and other peers., • Coordinates support efforts amongst production and engineering team when applicable., • Identifies training needs and arranges for training activities in responsible area(s)/department(s)., • Monitors training progress for trainer and trainee, ensures identified training is completed and maintains the employee-training matrix., • Ensure that the team is working well together including resolving basic Tier 1 employee conflicts and involving HR and/or the Supervisor involved when necessary., • Provide performance feedback to manager/supervisor for employee reviews., • Ensure that employees are managing expired materials in responsible area(s)/department(s), • Ensure that the employees are managing the review and recall of calibrated items in responsible area(s)/department(s), • Ensures all process related steps are completed with proper verification; electronic or manual signatures. When applicable perform any necessary ERP transactions such as but not limited to work in process receipts, work order splits, inventory adjustments, material issues, scrap, and labor transactions., • Completes defect and rejection forms and reviews with team members for opportunities of continuous improvement. Collects, reviews, and displays any other operational metric data applicable to running an effective and efficient area(s)/department(s)., • Attends meetings as production representative; such as but not limited to design review kick-off meetings, material review board, and production status meetings., • Monitors workflow and ensure team members are keeping the flow at an acceptable level., • Maintains a safe and compliant working environment., • Maintain tools and hardware ensuring team members have the proper components and equipment to perform their jobs efficiently, • Ensures all production parts are being handled according to the manufacturing instructions or work instructions, • Identifies and arranges lean events and continuous improvement measures in area(s)/department(s), • This position may require knowledge of SOX / 404 internal audit controls and related documentation., • Other duties as assigned. Qualifications • The ability to serve as a coach, mentor, role model for their own front line staff and others. Must be able to effectively communicate instructions to team(s) and listen to feedback. Must be willing to be a leader in the area(s)/department(s) and also work in a team environment with peers., • High School Diploma or GED, • Minimum 3-5 years of manufacturing experience., • Previous demonstrated leadership experience preferred but not required. Why You'll Enjoy Working Here: • Flexibility that works: 9/80 schedule with every other Friday off, • Professional growth: Continuing education support, certifications, and exposure to governance, risk, and compliance tools at a global scale., • A culture that values balance: Work with a high-performing, motivated team that also promotes positivity and collaboration., • Competitive rewards: Benefits start the first of the month after hire, quarterly bonus tied to company profitability, 401(k) with 3% company contribution, Employee Stock Purchase Plan, paid holidays (including a full Christmas week shutdown), and comprehensive health/vision/dental coverage. Why You'll Love Working Here • Enjoy a 9/80 schedule – get every other Friday off, • No weekend shifts – your time off stays yours, • Steady work in a clean, modern facility – bright, temperature-controlled, and organized, • Full benefits – health insurance, 401(k) match, paid time off, profit sharing, and more, • Culture of Balance & Growth – We believe in creating space for life outside of work while offering constant opportunities to sharpen your skills and grow your career., • Impact You Can See – Our designs will fly. Literally. Work on real products for real aircraft used around the world. Compensation & Benefits: • Hourly pay range: $22.00 - $28.00/hour with 10% shift differential, influenced by several factors including experience, skill set, education, certifications, market conditions, and business needs., • Competitive rewards: Benefits start the first of the month after hire, quarterly bonus tied to company profitability, 401(k) with 3% company contribution, Employee Stock Purchase Plan, paid holidays (including a full Christmas week shutdown), and comprehensive health/vision/dental coverage. Ready to Soar? Apply Today! We're looking for leaders ready to elevate aerospace engineering to the next level. If this sounds like the role for you, take the next step and join us in shaping technologies that touch the sky. Additional Considerations: • Due to federal contract obligations, this position may involve access to items subject to U.S. export-control laws. Employment is contingent upon the employee's authorization to access such items under applicable law. The company does not guarantee and is under no obligation to seek such authorization if it would be necessary., • An offer of employment is contingent on successfully passing a drug test and background check, • Ability to read, write and comprehend simple instructions and correspondence., • While performing the duties of this job, the employee is continually required to stand, walk, sit, use hands and arms to pull handles and push buttons and reach objects. Requirements may also include repetitive motions, climbing, balancing, stooping, bending, reaching, kneeling, crouching or crawling., • The employee must occasionally lift and/or move up to 30 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Astronics LSI is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail LSINY.jobs@astronics.com; or call: 716-655-0800. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Astronics Corporation (Nasdaq: ATRO) serves the world's aerospace, defense, and other mission critical industries with proven, innovative technology solutions. Astronics works side-by-side with customers, integrating its array of power, connectivity, lighting, structures, interiors, and test technologies to solve complex challenges. For over 50 years, Astronics has delivered creative, customer-focused solutions with exceptional responsiveness. Today, global airframe manufacturers, airlines, militaries, completion centers and Fortune 500 companies rely on the collaborative spirit and innovation of Astronics. The Company's strategy is to increase its value by developing technologies and capabilities that provide innovative solutions to its targeted markets. For more information on Astronics and its solutions, visit www.Astronics.com. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Job Description Description Veterinarian – Medical DirectorSuburban Animal Hospital About You As a key leader in our hospital, you'll drive positive change and growth. Your influence will shape our vision, foster an exceptional culture, and maintain high standards of care. Partnering with the practice manager and leadership team, you'll develop strategies, implement improvements, and guide our hospital towards excellence in patient and client care, while supporting staff development. Experience & Skills Requirements • Doctor of Veterinary Medicine (DVM / VMD) or equivalent degree required., • State Veterinary Board License and must be in good standing for the state in which they intend to be hired, prior to their start date., • Active DEA license or DEA licensure eligible.About The Hospital Suburban Animal Hospital is looking for a Medical Director that is passionate about teaching and a desire to share their knowledge in a highly collaborative environment. At Suburban, our Doctors and team are passionate about supporting our community. One of our associates is certified in Palliative and Hospice Care, providing supportive care to pets during the end stages of their lives both at the hospital and in their homes. Suburban has several DVM’s that treat exotic pets including small mammals and reptiles. The hospital even has a dedicated exotic treatment area. Suburban is located in Henrietta and serves that and the surrounding communities in Rochester, NY. Close to lots of restaurants, shops and highways that can connect you to areas outside of Rochester. The Suburban team is certified in Fear Free handling and is passionate about providing the best experience for our patients. We are open: Monday, Tuesday, Wednesday, Thursday from 8am-6pm, Friday 8am-5pm and Saturday 8am-2pm. Serving the greater Rochester area. Provide your best care as a Thrive Pet Healthcare veterinarian. At Thrive Pet Healthcare, you’ll care for a pet’s whole life, foster strong human-animal bonds and connect with your local community — all while backed by our coast-to-coast support. Thrive’s full operational support, innovative technology, and advanced training allow you to focus on providing exceptional care for pets’ health and well-being. We'll meet you where you are and invest in your growth as a professional and leader. The success of your patients’ care matters to you, and your success matters to us. Our progressive compensation model includes competitive base salaries with production compensation opportunities. Plus, no negative accrual. Benefits – our care in action Thrive offers a suite of benefits to support team members’ emotional, physical, professional, and financial wellbeing. In addition to our health and life insurance, and short- and long- term disability plans, we offer eligible team members:, • Competitive compensation, • Mental health resources, including 24/7 access to Lyra Health, • Employer-sponsored childcare and elder care, • Personalized care for every family-forming journey, • 401(k) match, • Student loan management tools and assistance Thrive’s Medical Excellence and Education Department leads training and mentorship programs designed to support and empower you with the knowledge, tools, and resources to strengthen and nurture your professional journey. Plus, we offer rich Medical Excellence through Education programs including Meant to Thrive doctor mentorship, comprehensive RACE-accredited dental education, team and patient safety resources and guidance - and more! To learn more about this amazing opportunity, apply today or reach out to us at GPrecruiting@thrivepet.com. Compensation negotiable based on credentials and experience with an annual PROSAL full-time range starting at $180,000/year. The actual salary offered will carefully consider a wide range of factors, including your skills, qualifications, experience, and location. About Thrive Vet-founded and Austin-born, Thrive Pet Healthcare has expanded to over 380 partner hospitals nationwide, united by a mission to shape the future of pet well-being through medical excellence, innovative technology, and a connected community. We bridge general practice, urgent care, specialty, and emergency care, and our locally rooted, nationally connected hospitals benefit from Thrive's extensive resources while maintaining their unique identities. We believe that supporting our people is the key to helping pets thrive through every stage of life. Join us where #WeThriveTogether. We provide customizable professional development opportunities, a supportive work environment that values work-life rhythms, and 24/7 mental health support. At Thrive Pet Healthcare, we celebrate and embrace the uniqueness and diversity of all of our team members, pet owners, and pets. We strive to create a diverse, equitable, and inclusive culture where all team members are empowered and feel a sense of belonging.

Job Description Description Veterinarian, Medical Director | Bayview Animal Hospital | Sign-On Bonus & Relocation Support Offered! About You As a key leader in our hospital, you'll drive positive change and growth. Your influence will shape our vision, foster an exceptional culture, and maintain high standards of care. Partnering with the practice manager and leadership team, you'll develop strategies, implement improvements, and guide our hospital towards excellence in patient and client care, while supporting staff development. Experience & Skills Requirements • Doctor of Veterinary Medicine (DVM / VMD) or equivalent degree required., • State Veterinary Board License and must be in good standing for the state in which they intend to be hired, prior to their start date., • Active DEA license or DEA licensure eligible.Bayview Animal Hospital is looking for a Medical Director to join our team as part of the Thrive Pet Healthcare community. At Bayview Animal Hospital, a Thrive Pet Healthcare partner, you will have the support, tools, and resources to elevate your skills. As a hospital deeply rooted in the local community, you will experience the best of both worlds: a genuine local feel with the benefits of Thrive's national resources. About The Hospital Bayview is looking for a Medical Director that is passionate about teaching and sharing their knowledge to help others succeed. Our hospital has several Doctors that treat exotic pets. While that would not be required, we would love someone who has a passion for exotic pets! Bayview serves the Webster community and the surrounding areas in Rochester, NY. Located right near Lake Ontario, it is the perfect spot for family. Offers great school districts, lots of parks and outdoor activities for all 4 seasons. The Bayview team is a close-knit team that prides itself on providing excellent client experience and high-quality medicine for our patients. We have multiple long term team members that enjoy our close family feel. We are open Monday, Wednesday, Thursday, and Friday from 8:00 a.m. to 5:00 p.m., Tuesday from 8:00 a.m. to 6:00 p.m., and Saturday from 8:00 a.m. to 2:00 p.m. Serving Ontario, Penfield, Rochester, and Webster, New York. Provide your best care as a Thrive Pet Healthcare veterinarian. At Thrive Pet Healthcare, you’ll care for a pet’s whole life, foster strong human-animal bonds and connect with your local community — all while backed by our coast-to-coast support. Thrive’s full operational support, innovative technology, and advanced training allow you to focus on providing exceptional care for pets’ health and well-being. We'll meet you where you are and invest in your growth as a professional and leader. The success of your patients’ care matters to you, and your success matters to us. Our progressive compensation model includes competitive base salaries with production compensation opportunities. Plus, no negative accrual. Benefits – our care in action Thrive offers a suite of benefits to support team members’ emotional, physical, professional, and financial wellbeing. In addition to our health and life insurance, and short- and long- term disability plans, we offer eligible team members:, • Competitive compensation, • Mental health resources, including 24/7 access to Lyra Health, • Employer-sponsored childcare and elder care, • Personalized care for every family-forming journey, • 401(k) match, • Student loan management tools and assistance Thrive’s Medical Excellence and Education Department leads training and mentorship programs designed to support and empower you with the knowledge, tools, and resources to strengthen and nurture your professional journey. Plus, we offer rich Medical Excellence through Education programs including Meant to Thrive doctor mentorship, comprehensive RACE-accredited dental education, team and patient safety resources and guidance - and more! To learn more about this amazing opportunity, apply today or reach out to me at Ryan.Hart@ThrivePet.com. Compensation negotiable based on credentials and experience with an annual PROSAL full-time range starting at $170,000 year. The actual salary offered will carefully consider a wide range of factors, including your skills, qualifications, experience, and location. About Thrive Vet-founded and Austin-born, Thrive Pet Healthcare has expanded to over 380 partner hospitals nationwide, united by a mission to shape the future of pet well-being through medical excellence, innovative technology, and a connected community. We bridge general practice, urgent care, specialty, and emergency care, and our locally rooted, nationally connected hospitals benefit from Thrive's extensive resources while maintaining their unique identities. We believe that supporting our people is the key to helping pets thrive through every stage of life. Join us where #WeThriveTogether. We provide customizable professional development opportunities, a supportive work environment that values work-life rhythms, and 24/7 mental health support. At Thrive Pet Healthcare, we celebrate and embrace the uniqueness and diversity of all of our team members, pet owners, and pets. We strive to create a diverse, equitable, and inclusive culture where all team members are empowered and feel a sense of belonging.

Job Description Description Medical Director Rochester Community Animal Clinic Signing Bonus Offered Rochester Community Animal Clinic is seeking a Medical Director with the Thrive Pet Healthcare community. Serving Monroe County, and Rochester, New York. About You As a key leader in our hospital, you'll drive positive change and growth. Your influence will shape our vision, foster an exceptional culture, and maintain high standards of care. Partnering with the practice manager and leadership team, you'll develop strategies, implement improvements, and guide our hospital towards excellence in patient and client care, while supporting staff development. Experience & Skills Requirements • Doctor of Veterinary Medicine (DVM / VMD) or equivalent degree required., • State Veterinary Board License and must be in good standing for the state in which they intend to be hired, prior to their start date., • Active DEA license or DEA licensure eligible. At Rochester Community Animal Clinic, a Thrive Pet Healthcare partner, you will have the support, tools, and resources to lead this Thriving hospital. As a hospital deeply rooted in the local community, you will experience the best of both worlds: a genuine local feel with the benefits of Thrive's national resources. About The HospitalRochester Community Animal Clinic (RCAC) is a high-volume, high-quality spay/neuter and vaccine clinic serving Rochester, New York’s low-income community, and numerous pet rescue and adoption organizations. Our team provides individualized, compassionate, thoughtful care for our patients and pet parents. Our clients trust us to provide the best care for their furry family members. We are open Monday through Friday from 8:00 a.m. to 5:00 p.m. Benefits – our care in action Thrive offers a suite of benefits to support team members’ emotional, physical, professional, and financial wellbeing. In addition to our health and life insurance, and short- and long- term disability plans, we offer eligible team members:, • Competitive compensation, • Medical Director Stipend (Quarterly), • Medical Director Discretionary Fund, • Moving Allowance, • Signing bonus, • Comprehensive health benefits, • Mental health resources, including 24/7 access to Lyra Health, • Paid parental and purr-ental leave, • Employer-sponsored childcare and elder care, • Personalized care for every family-forming journey, • Student loan management tools and assistance, • 401(k) match Compensation is negotiable based on credentials and experience with Quarterly PROSAL bonuses full-time range starting at $170,000/year. The actual salary offered will carefully consider a wide range of factors, including your skills, qualifications, experience, and location. Plus, no negative accrual. Thrive’s Medical Excellence and Education Department leads training and mentorship programs designed to support and empower you with the knowledge, tools, and resources to strengthen and nurture your professional journey. Plus, we offer rich Medical Excellence through Education programs including Meant to Thrive doctor mentorship, comprehensive RACE-accredited dental education, team and patient safety resources and guidance - and more! Provide your best care as a Thrive Pet Healthcare veterinarian. At Thrive Pet Healthcare, you’ll care for a pet’s whole life, foster strong human-animal bonds and connect with your local community all while backed by our coast-to-coast support. Thrive’s full operational support, innovative technology, and advanced training allow you to focus on providing exceptional care for pets’ health and well-being. We'll meet you where you are and invest in your growth as a professional and leader. The success of your patients’ care matters to you, and your success matters to us. To learn more about this amazing opportunity, apply today or reach out to us at Ryan.Hart@ThrivePet.com About Thrive Vet-founded and Austin-born, Thrive Pet Healthcare has expanded to over 400+ partner hospitals nationwide, united by a mission to shape the future of pet well-being through medical excellence, innovative technology, and a connected community. We bridge general practice, urgent care, specialty, and emergency care, and our locally rooted, nationally connected hospitals benefit from Thrive's extensive resources while maintaining their unique identities. We believe that supporting our people is the key to helping pets thrive through every stage of life. Join us where #WeThriveTogether. We provide customizable professional development opportunities, a supportive work environment that values work-life rhythms, and 24/7 mental health support. At Thrive Pet Healthcare, we celebrate and embrace the uniqueness and diversity of all of our team members, pet owners, and pets. We strive to create a diverse, equitable, and inclusive culture where all team members are empowered and feel a sense of belonging.

Job Description Description Veterinarian – Medical DirectorFull Time Stone Ridge Veterinary Hospital About You As a key leader in our hospital, you'll drive positive change and growth. Your influence will shape our vision, foster an exceptional culture, and maintain high standards of care. Partnering with the practice manager and leadership team, you'll develop strategies, implement improvements, and guide our hospital towards excellence in patient and client care, while supporting staff development. Experience & Skills Requirements • Doctor of Veterinary Medicine (DVM / VMD) or equivalent degree required., • State Veterinary Board License and must be in good standing for the state in which they intend to be hired, prior to their start date., • Active DEA license or DEA licensure eligible. Stone Ridge Veterinary Hospital is looking for an Veterinarian, Medical Director to join our team as part of the Thrive Pet Healthcare community. At Stone Ridge Veterinary Hospital, a Thrive Pet Healthcare partner, you will have the support, tools, and resources to elevate your skills. As a hospital deeply rooted in the local community, you will experience the best of both worlds: a genuine local feel with the benefits of Thrive's national resources. About The Hospital Stone Ridge Veterinary Hospital is looking for a Medical Director that is passionate about teaching and a desire to share their knowledge in a highly collaborative environment. As an AAHA accredited practice, we follow their guidelines to provide excellent client experience and high-quality care to our patients. Our updated facility serves the Greece and surrounding communities in Rochester, NY. As one of the largest suburbs in New York, Greece offers a wide range of activities for all 4 seasons. The Stone Ridge team is committed to excellence and serving their community. We are open Monday through Thursday from 8:00 a.m. to 6:00 p.m., Friday from 8:00 a.m. to 5:00 p.m., and Saturday from 8:00 a.m. to 2:00 p.m. Serving Rochester and Greece, New York Provide your best care as a Thrive Pet Healthcare Medical Director. At Thrive Pet Healthcare, you’ll care for a pet’s whole life, foster strong human-animal bonds and connect with your local community — all while backed by our coast-to-coast support. Thrive’s full operational support, innovative technology, and advanced training allow you to focus on providing exceptional care for pets’ health and well-being. We'll meet you where you are and invest in your growth as a professional and leader. The success of your patients’ care matters to you, and your success matters to us. Our progressive compensation model includes competitive base salaries with production compensation opportunities. Plus, no negative accrual. Benefits – our care in action Thrive offers a suite of benefits to support team members’ emotional, physical, professional, and financial wellbeing. In addition to our health and life insurance, and short- and long- term disability plans, we offer eligible team members:, • Competitive compensation, • Mental health resources, including 24/7 access to Lyra Health, • Employer-sponsored childcare and elder care, • Personalized care for every family-forming journey, • 401(k) match, • Student loan management tools and assistance Thrive’s Medical Excellence and Education Department leads training and mentorship programs designed to support and empower you with the knowledge, tools, and resources to strengthen and nurture your leadership journey. Plus we offer a robust tool-kit within our Medical Excellence programs, including Meant To Thrive Doctor Mentorship, RACE accredited dental education, and dedicated team and patient safety resources. To learn more about this amazing opportunity, apply today or reach out to us at GPrecruiting@thrivepet.com. Compensation negotiable based on credentials and experience with an annual PROSAL full-time range starting at $180,000/year. The actual salary offered will carefully consider a wide range of factors, including your skills, qualifications, experience, and location. About Thrive Vet-founded and Austin-born, Thrive Pet Healthcare has expanded to over 380 partner hospitals nationwide, united by a mission to shape the future of pet well-being through medical excellence, innovative technology, and a connected community. We bridge general practice, urgent care, specialty, and emergency care, and our locally rooted, nationally connected hospitals benefit from Thrive's extensive resources while maintaining their unique identities. We believe that supporting our people is the key to helping pets thrive through every stage of life. Join us where #WeThriveTogether. We provide customizable professional development opportunities, a supportive work environment that values work-life rhythms, and 24/7 mental health support. At Thrive Pet Healthcare, we celebrate and embrace the uniqueness and diversity of all of our team members, pet owners, and pets. We strive to create a diverse, equitable, and inclusive culture where all team members are empowered and feel a sense of belonging.

Job DescriptionAnimal Care Technician-Part time Part time every other weekend and holiday position with Buffalo Institute for Medical Research, Inc. for Animal Care Technician position not to exceed 15 hours per pay period. Under the supervision of Veterinary Medical Unit (VMU) Manager principal duties include: • Responsible for the overall care, safety and well-being of research animals., • Feed, water and change a variety of species housed in the Veterinary Medical Unit at VAWNYHS., • Assess health status and report any animal abnormality or sickness to the Manager., • Dispense medications to a variety of species as instructed by the Manager or Principle Investigator., • Cage processing and cleaning of animal rooms and ancillary facilities according to VMU SOP's and the Guide for the Care and Use of Animals in a Research Setting., • NYS Licensed Veterinary Technician -Preferred, • AALAS certification at ALAT level or above, or relevant work experience preferred.Job Type: Part time, every other weekend and holidays, 2 hours per shift with flexible start between 6am-4pm. Salary: $25.00 per hour Benefits: Federal Holidays, Vacation and Sick Leave (Pro-rated) Schedule: Sat and Sunday every other weekend Holidays as needed Education: Associate (Required) Experience: • Animal handling: 2 years (Required), • Animal restraint: 2 years (Required), • Animal Research: 2 years (Preferred)License/Certification:, • NYS Licensed Veterinary Technician (Preferred)Work Location: In person

Job Description McIntosh Box and Pallet is seeking a Class B Truck Driver to join our team in Buffalo NY! You will be responsible for safely operating a truck with a capacity of at least 26,000 pounds Gross Vehicle Weight (GVW). Pay: $22 based on experience Hours: Day Shift (6:30am-3:00) As a CDL B Truck Driver you will help ensure our product is delivered in a safe and timely manner. You will have the opportunity to build long standing relationships with our customers during deliveries. Class B Driver Responsibilities: • Safely operate a heavy or tractor-trailer truck, • Load and unload cargo, • Properly track and document activity log, • Report any issues or incidents to your manager, • Fully understand how to operate and safely drive your assigned delivery vehicle, • Ensure trailer hitch is properly and securely attached to the tractor unit, • Communicate with dispatch as needed, • Perform inspections of your vehicle prior to and following each trip, • Always ensure your vehicle is kept clean, • Adhere to company rules and regulations, • Obey all applicable traffic laws and drive according to the weather/road conditions, • Comply with ICC and DOT regulations, • Make safety a priority at all times Qualifications: • Previous experience in truck driving or other related fields, • Commercial driver's license, • Ability to handle physical workload, • Strong work ethic, • 2+ years proven experience with tractor-trailer driving preferred, • Clean driving record with no moving violations, • A background check and drug test are required Benefits: • 401 (k), • 401 (k) Matching, • Health, Vision and Dental Insurance, • Employee Assistance Program, • Heath Savings Account, • Life Insurance, • Paid Time Off, • Safety Bonus Why Work for McIntosh! McIntosh Box and Pallet Company is a leading provider of custom wood packaging solutions specializing in custom crates, pallets and boxes to customers in a variety of industries. With over 60 years of experience, we have built a strong foundation by building relationships, a strong customer service focus, reliability and quality excellence. Our commitment to top quality craftsmanship, continuous improvement, and sustainability allows us to continue to provide new and innovative packing solutions to our customer. At McIntosh, we foster a collaborative and positive work environment where we encourage our employees to share their ideas and suggestions to help continue our growth and success as a company. As we continue to grow, we are looking for talented and passionate individuals to join our team! Apply Today! E-Verify Disclaimer: McIntosh Box and Pallet participates in E-Verify to confirm employment eligibility. \nCompany Description McIntosh Box & Pallet is a trusted manufacturer of wood packaging and pallets, known for craftsmanship, safety, and operational excellence. McIntosh Box & Pallet is a trusted manufacturer of wood packaging and pallets, known for craftsmanship, safety, and operational excellence.

Job DescriptionDescription: The Manufacturing Deburr Leadman is a skilled deburr technician that can lead a team of deburr employees on quality and packaging of all CNC manufactured product at Snyder Industries. Oversees the shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final inspection. Uses blueprints, ship lists, and computer MRP software to meet customer requirements. Requirements:Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Oversees final tapping operations · Prioritizes product for deburr employees with help with Sales department · Reviews final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance with customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise/lead team · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Recommend: MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) · Recommend: CNC Machining background Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job Description Southtowns Care Center a premier long term skilled nursing facility located in Buffalo, New York has immediate openings for enthusiastic and energetic CNA’s for all shifts to become part of our dedicated and professional staff. We are looking for individuals who desire a worthwhile career that has purpose and makes a meaningful difference in someone’s life. Under supervised professional and skilled guidance, our CNAs give direct nursing care to assigned residents and perform other services necessary for their personal and comforts needs. We look forward to meeting with you to discuss professional opportunities at our facility. Ø In addition, educational reimbursement is available to qualified nursing students. Ø We are paying $16.50 for this position. Job Responsibilities / Duties: • Promotes resident hygiene and comfort., • Distributes food/water and feeds residents., • Assists with repositioning and transferring residents., • Ambulates and transports residents., • Records and totals fluid intake and output., • Weighs residents., • Documents on flow sheets., • Assists with admission, discharge and postmortem care., • Responds to call lights in a timely manner., • Performs perineal care and uncomplicated colostomy care., • Reports all observations & assessments to the Team Leader/Nurse Manager/Charge Nurse., • Takes and records vital signs., • Makes beds and keeps resident’s units clean and in order., • Prepares room for housekeeping after resident discharge. Skill / Experience Requirements. · Current NYS CNA Certification. · Previous Long Term Care experience a plus. EOE Statement WE ARE AN EQUAL OPPORTUNITY EMPLOYER. Applicants and employees are considered for positions and are evaluated without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved. About Us: We are a premier skilled nursing facility located in Buffalo, New York. We operate our facility in a manner to provide a warm, nurturing environment, which allows each resident to maintain his or her individuality and dignity. Our staff is committed to ensuring the highest quality of life for all our residents. Southtowns Care Center considers the health and safety of its residents, family members, and team members as its highest priorities. All offers of employment with Sapphire Nursing at Meadow Hill are conditioned on completing and passing a background and drug test, participating in mandatory vaccine programs (e.g., Covid-19), participating in testing requirements (e.g. Covid-19, TB) and using designated PPE when required.

Job DescriptionDescriptionPosition Overview DWC Mechanical | Buffalo, NY $35–$45/hour, based on experience | Full-TimeDWC Mechanical is seeking an experienced Lead Commercial HVAC Service Technician to support our Buffalo operation, provide technical leadership in the field, and develop toward a future Field Manager position. This opportunity is ideal for a skilled commercial HVAC technician who enjoys solving challenging service issues, helping other technicians succeed, and taking ownership of the customer experience. You’ll initially remain hands-on with diagnostics, repairs, and maintenance while assuming increasing responsibility for technician support, quality control, and field coordination. Our goal is to develop this individual into a Field Manager as they demonstrate leadership readiness and the needs of the operation support the transition. DWC Mechanical has built its reputation on technical expertise, dependable workmanship, and strong customer relationships since 1995. We’re looking for someone who wants to help shape a strong service team and build a long-term career with us. ResponsibilitiesKey Responsibilities Commercial HVAC Service & Technical Leadership • Diagnose, troubleshoot, repair, and maintain commercial HVAC equipment and systems., • Perform preventative maintenance, system inspections, and operational checks., • Identify electrical, mechanical, refrigerant, and controls-related issues and recommend appropriate corrective action., • Serve as a technical resource for other technicians, helping resolve difficult service calls and recurring equipment problems., • Support complex repairs and help verify that equipment operates properly before work is considered complete., • Communicate findings, repair recommendations, and equipment concerns clearly to customers and service leadership.Technician Development & Quality, • Mentor apprentices and less-experienced technicians through hands-on guidance and troubleshooting support., • Reinforce consistent standards for workmanship, safety, documentation, and customer service., • Help identify training needs and support technicians in building their skills and independence., • Assist with reviewing completed work and resolving callbacks to improve service quality., • Lead by example through reliability, professionalism, accountability, and follow-through.Field Coordination & Customer Support, • Coordinate with the Service Manager and dispatch team on job priorities, technical support needs, and field challenges., • Communicate parts requirements, repair status, follow-up needs, and potential delays promptly., • Help ensure technicians have the information, tools, and materials needed to complete assigned work., • Build trusted relationships with facility personnel, property managers, and other customer contacts., • Help resolve customer concerns and escalate issues appropriately., • Maintain accurate service records and ensure proper care of company vehicles, tools, and equipment.Growth Toward Field Manager As you develop in the role, you’ll work with service leadership to take on greater responsibility for: • Day-to-day field coordination and technician support., • Coaching, onboarding, and development of service technicians., • Monitoring workmanship, productivity, safety, and customer satisfaction., • Addressing escalated service issues and reducing repeat visits., • Improving communication between technicians, dispatch, and service management.Progression will be based on demonstrated technical judgment, leadership ability, communication, performance, and business needs. QualificationsWhat We’re Looking For • Strong commercial HVAC service experience with the ability to independently diagnose and resolve complex equipment issues., • Experience supporting, mentoring, or providing technical direction to other technicians., • Working knowledge of commercial HVAC equipment, electrical systems, refrigeration, and controls., • Strong organizational skills and the ability to manage service priorities effectively., • Clear communication and a professional, customer-focused approach., • Willingness to remain hands-on while gradually taking on broader leadership responsibilities., • A genuine interest in developing into field management., • Valid driver’s license with an acceptable driving record.Preferred Qualifications, • Previous lead technician, service supervisor, or similar field leadership experience., • EPA Section 608 certification., • HVAC trade school or apprenticeship training., • Experience with building automation systems, advanced controls, VRF systems, boilers, or chillers., • Experience using digital service documentation and field-service management software. Ready to turn your technical experience into a leadership opportunity? Join DWC Mechanical and help grow our service team! Benefits • Competitive pay, • Comprehensive health insurance (including dental and vision), • Health Saving Account with company contribution, • Paid Life Insurance, • 401(k) plan with company matching, • Generous paid time off, • Paid Holidays, • Professional development assistance, • Employee discount

Job Description Job Title: Warehouse Associate – Material Handler Department: Warehouse Reports To: Warehouse Manager Job Status: Full-time FLSA Classification: Non-exempt Hours: 6 a.m. – 4:30 p.m. Monday – Thursday Location: Cheektowaga, NY (onsite) Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic, and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor-trailer and bus industries. Our commitment to quality and durability assures us a leading edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to customer needs. Job Summary The candidate in this position is responsible for coordinating activities to move product throughout the warehouse and within the company’s computer software systems. The Material Handler is also responsible for ensuring that accuracy, quality, and efficiency are achieved. Responsibilities: • Load and unload trucks in staging areas as required, weigh LTL shipments, and stage large orders, • Stage raw material for production and ensure continuous replenishment, • Ensure all inventory movement is accurately recorded in the company system, • Organize stock bins and replenish shelves to ensure accuracy and efficiency for order pickers, • Assist order pickers by putting away large items received and pulling stock down from upper racking, • Maintain fork trucks, pallet jacks, or industrial trucks, including conducting and recording daily inspections, • Follow all company policies, complete all safety training required, and report any unsafe work practices and concerns, • Assist team members with projects or tasks assigned by manager Education & Experience: • In possession of a high school diploma or equivalent (preferred), • 2-5 years’ experience driving a forklift (preferred), • Experience in packaging and shipping, and using weight tools and equipment (preferred) Required Skills & Abilities: • Familiar with computer software programs, • Attention to detail, • Organized, • Works well with deadlines, • Good math and analytical skills, • Adapts well to change, • Works in close quarters with others – ability to be a team player, • Desire for a clean and safe work environment Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department-specific protocols, • Report safety hazards or potential safety hazards to the reporting Supervisor, • Attend company safety meetings Physical Requirements: • Ability to lift and/or carry up to 50 lbs often, • Ability to stand for long periods of time, • Must be able to frequently kneel, squat, and climb, • Must be able to walk the warehouse floor on a regular basis Perks: • Health, Dental, Vision, Life and AD&D, and Voluntary insurance coverages, • 401(k) program and company match, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. \nCompany Description Our Story Over a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets. Our primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent. Our active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user. While we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers. Our Story\n\nOver a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets.\n\nOur primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent.\n\nOur active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user.\n\nWhile we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safety and cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation per company policies., • Stay current with product and technology updates through ongoing training. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safety and cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation per company policies., • Stay current with product and technology updates through ongoing training. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities • Install and configure intrusion, fire, CCTV, and access control systems., • Run electrical wiring in confined spaces, including drilling, trenching, and aerial work., • Complete system wiring and equipment setup to meet customer and contract requirements., • Coordinate with Team Lead or Project Manager on scheduling and equipment delivery., • Test and troubleshoot new installations to ensure functionality and code compliance., • Maintain a professional appearance and adhere to safety and cost guidelines., • Foster positive customer relationships and support contract retention., • Handle proprietary information and documentation per company policies., • Stay current with product and technology updates through ongoing training. Minimum Requirements • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems., • High School Diploma or equivalent, • Vocational/Technical Degree in electrical, security, or computer systems preferred, • Access Control Certification preferred, • IP Video and IT experience preferred, • Climb ladders that extend up to 24 ft. in height, • Carry items up to 75 pounds, • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas offers comprehensive benefits including: • Highly competitive salary, • Company Vehicle, • Company Cell Phone, • Opportunity for annual merit pay increases., • Paid company training, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job DescriptionCompany Description Unlock Your Career Potential in Traffic Safety with AWP Safety – America’s Leading Traffic Management Company! Job Description As a Protector, you work with a team at job sites. No experience or degree is needed. Safety comes first—always. We train you. We support you. We help you build a career. Your daily work includes: Setting up cones, signs, and barricades and taking traffic control equipment down Using a stop/slow paddle to guide traffic, watching traffic and job site activity Following all safety rules taught in training Communicating with your crew and supervisor Helping keep vehicles and equipment clean and safe Working outside all year, in all weather Shifts may change based on job needs: Some nights, weekends, or emergency work may be required You may stand or walk 8 to 12 hours per shift We give you a hard hat, safety goggles, a safety vest, safety whistle, walkie talkie, and cold/hot weather gear: you bring your own steel toe safety boots that go above the ankle. Qualifications Valid driver’s license Able to stand, walk, and work outside for long periods Able to lift 40–50 pounds Willing to work in traffic and changing weather Flexible schedule; Show up on time, every shift Must pass pre-hire screening, including a drug test (this is a safety sensitive job) Stay alert around moving traffic and follow all safety rules all the time Treat coworkers, clients, and the public with respect Additional Information Pay: • Pay: $21.00–$21.75 per hour, • Overtime available, • Pay increases in your first year, • Paid training and a traffic safety certificate Benefits for eligible employees include: • Paid Time Off and paid holidays, • Paid sick time (where required), • On demand pay availability, • Health insurance, • 401(k) option, • Employee Assistance Program, • Referral bonuses Promotion Opportunities: • Senior Protector, • Lead Protector, • Field Supervisor, • Manager roles AWP Safety is an Equal Opportunity Employer (EOE). Women, minorities, veterans, and individuals with disabilities are encouraged to apply. Qualified applicants will receive consideration for employment without regard to race, color, religion, creed, age, national origin, ancestry, sex, pregnancy, sexual orientation, gender identity or expression, genetic information, marital status, protected veteran status, disability, or any other status protected by applicable federal, state, or local law.

Job Description The General Maintenance Technician will perform a wide variety of skilled and semi-skilled building maintenance, repair, and construction tasks in the mechanical, building, and electrical trades as assigned by the Buildings and Grounds supervisor. Participates in quality improvement activities at all agency sites. The Maintenance Technician shift is Monday- Friday 6am-2:30pm. Major Responsibilities/Activities: • Perform carpentry, electrical, plumbing, painting, and other related work as directed by the Facilities manager, • Follows appropriate safety guidelines in completing duties, • Properly uses, cleans and stores equipment needed to complete duties, • Completes duties in a timely and responsible manner, • Must be able to operate maintenance equipment. (saws, bob cat, power tools ), • Must have mobility to access multi-level buildings and ladders for repair task, • Exhibits appropriate language, work attitudes and dress, • Exhibits dependability, proper work attendance and punctuality, • Shows respect and courtesy in all interactions and communication-internal or external to agency, • Demonstrates interest, knowledge and support for the Agency mission, values and philosophy, • Demonstrates self directed behaviors, • Supports and communicates with supervisor and co-workers in a cooperative manner, • Demonstrates initiative and seeks supervisory counsel when appropriate, • Accepts constructive criticism and uses supervision appropriately, • Models and practices sensitivity, fair treatment and acceptance of diversity in all interpersonal interactions, • On-call duties required Competitive Pay Rate: $20- $25 per hour based on experience Minimum Requirements: • Basic knowledge in trades such as Drywall, electric, plumbing & carpentry, • Ability to operate any equipment pertaining to painting, sprayer, scaffolds, ladders, etc., • Valid driver’s license required with continued automobile insurance, • Must be able to lift 50 lbs, • Walking, climbing, stooping, kneeling and lifting will be required. The General Maintenance Technician shift is Monday- Friday 6am-2:30pm. CFS offers full-time employees the below benefits to support our employees and their families and help to create a healthy work environment. • Paid Time Off (PTO) –20 PTO Days (25 Days After Five Years of Employment) –14 Paid Holidays (includes 2 flex holidays) – Bereavement: Four Paid Days – Paid Jury Duty • Employer Paid Life Insurance, • Medical, Two Plan Options, • Dental, Two Plan Options, • Vision Insurance, • Wellness Program and Incentives, • Health Savings Account (HSA) and Quarterly Employer-Contributions, • Healthcare Flexible Spending Account (FSA), • Dependent Care FSA Retirement, • Employee Referral Bonus, • Qualifying Employer for Public Service Student Loan Forgiveness Program (PSLF), • 403(b) Right Away and Employer-Contributions After Two Years Child & Family Services is an Equal Opportunity Employer: Child & Family Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran or familial status, or genetics. In addition to federal law requirements, Child & Family Services complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer leaves of absence, compensation, and training.

As an Airside Experience Specialist, you are the face of our private aviation terminal, delivering a seamless, personalized, and welcoming experience for every guest, crew member, and aircraft in our care. In this dynamic role, you'll combine exceptional hospitality with hands-on operational support to ensure our guests feel cared for, from wheels down to wheels up. You’ll operate ground service equipment and perform aircraft ground services while engaging guests with professionalism and a service-first mindset. This role requires schedule flexibility, including nights, weekends and holidays, and the ability to thrive in outdoor environments around active aircraft and in varying weather conditions. If you enjoy creating memorable guest experiences in a fast-paced, luxury-driven environment – and you're excited by the energy of the runway – this is the role for you. (Other duties may be assigned) • Work as part of a team to conduct airside operations safely and efficiently in accordance with established policies and standard operating procedures (SOPs) ensuring efficient and accurate communication through various methods to accomplish operational tasks., • Collaborate, cooperate, and work closely with all team members, guests, clients, vendors, and aircraft crewmembers to ensure service needs are met. Services include, but are not limited to, fueling, de-icing, lavatory, ground power and potable water services, parking, marshalling, wing walking, delivering catering and towing., • Proactively prepare for arriving/departing aircraft, identify and perform open job tasks, and immediately speak up and/or point out observed safety concerns to all stakeholders., • Operate and drive ground service equipment such as fuel trucks, de-icing trucks, ground power units, tugs, stair trucks, etc., • Load and unload luggage and other cargo into/out of aircraft and from/into the PAT, guest vehicle, or other mode of transportation., • Provide professional and friendly guest service while exhibiting a positive and helpful attitude to everyone at all times ensuring guests always receive an exceptional experience., • Offer safe, convenient, and courteous transportation when driving shuttle vehicle to transport guests, luggage and cargo., • Maintain safe, clean, and secure ramps and operations., • Fuel handling, including fuel quality control, fuel receipt, inventory and maintaining accurate related documentation., • Understand, comply with, and enforce all operational, safety, and guest service requirements for all aspects of the job., • Stop work when an unsafe condition or act is likely to cause harm to people, the environment, Company or guest assets, or the Company’s reputation if the work continues. Report concerns to the appropriate manager and cooperate in addressing the unsafe act or condition., • Follow emergency response procedures during critical events., • Understand, comply with, and enforce all security (physical, cyber and data) protocols as dictated by both Signature Aviation and the airport., • Create accurate records pertaining to time worked and activities and services performed. Minimum Education and/or Experience: • High School Diploma or General Education Degree (GED)., • Minimum of 18 years of age., • Ability to pass company background checks (criminal and motor vehicle), drug tests, meet airport background check requirements to receive and maintain an airport security badge, and be insurable by the Company's applicable insurance policies., • Must be legally authorized to work in the jurisdiction of employment., • Excellent vision and coordination to move and/or direct aircraft and visually inspect aircraft fuel. Ability to pass a color vision test for purposes of inspecting aviation fuel., • Must possess a valid state driver’s license. In some locations a commercial driver’s license (CDL) is required as dictated by local regulations and business needs., • Must be able to exercise good judgment and follow directions/directives from supervisor/management., • Preferred: Three (3) to six (6) months experience and/or training in aviation, customer service or other related field; or equivalent combination of education and experience and/or training. Additional knowledge and essential skills: • Hospitality Skills: Excellent guest service skills with an energetic, outgoing, and guest-obsessed personality. Must be able to anticipate guest needs and prioritize guest requests and job responsibilities by exhibiting a keen ability to multi-task in a fast-paced environment. Must be able to maintain professionalism and confidentiality., • Language Skills: Ability to read and comprehend documents such as safety rules, operating instructions, and procedure manuals, and for safety-sensitive tasks, in English. Clearly communicate in English with others in person, via telephone, radio communicators, and in writing., • Math Skills: Ability to perform simple arithmetic (e.g., addition, subtraction, multiplication, division, percentages, fractions, angles, degrees, time)., • Physical Ability: Must be able to physically enter/exit and operate motor vehicles and ground support equipment such as fuel trucks, vans, tugs, and cars. Must be able to perform various functions safely and efficiently (e.g., fueling, de-icing) from elevated heights., • Critical Thinking / Reasoning Ability: Ability to carry out multi-step instructions. Ability to deal with standardized situations with only occasional or no variables., • Interpersonal Skills: Ability to get along and work well with others. Excellent interpersonal skills for effective collaboration with team members and service to guests., • Multitasking: Ability to handle multiple tasks simultaneously while maintaining attention to detail., • Computer Skills: Ability to use a computer and email, learn necessary company software, and pass computer-based training modules. Task Management: Ability to successfully and timely complete Signature’s training programs. Pay ranges vary based on multiple factors, including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay range for this position is $18.50 to $20 / hour. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Tuition reimbursement, • Training and Development, • Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

As an Airside Experience Associate, you play a hands-on role in delivering safe, efficient, and guest-focused service within the private aviation environment. Your support helps keep day-to-day operations running smoothly, while also contributing to an exceptional ground experience for guests and crews alike. You’ll be responsible for the careful handling of baggage, cargo, and freight, as well as monitoring secure airport access points - all with a mindset of service, precision, and safety. Whether you’re managing ramp activity or assisting with aircraft support, your presence contributes directly to a positive and seamless guest journey. This role requires flexibility to work different shifts, including nights, holidays, and weekends, with the ability to operate in both indoor and outdoor conditions near active aircraft and ground equipment and in varying weather conditions. If you take pride in operational excellence and love creating exceptional guest experiences, this is your opportunity to make an impact from the ground up. (Other duties may be assigned) • Responsible for loading and unloading baggage, freight, and cargo and for properly transferring packages between planes or other modes of transportation., • Operate and drive ground service equipment such as tugs, trucks, conveyors, and other freight handling equipment., • Conduct identification checks for flight crews, passengers, visitors and vendors entering the terminal and/or the Airport Operations Area (AOA) in accordance with the Company’s security procedures., • Monitor facilities to include street side, parking lots, terminal, hangars and AOA., • Assist Airside Experience Specialists to ensure our guests receive an exceptional experience. Services to include, but not limited to, connecting ground power units and providing potable water services, wing walking, chocking and positioning stairs/jetway to aircraft., • Stop work when an unsafe condition or act is likely to cause harm to people, the environment, Company or guest assets, or the Company’s reputation if the work continues. Report concerns to the appropriate manager and cooperate in addressing the unsafe act or condition., • Maintain safe, clean and secure ramps and operations., • Create accurate records pertaining to time worked and activities and services performed. Minimum Education and/or Experience: • High School Diploma or General Education Degree (GED)., • Minimum of 18 years of age., • Ability to pass company background checks (criminal and motor vehicle), drug tests, meet airport background check requirements to receive and maintain an airport security badge, and be insurable by the Company's applicable insurance policies., • Must be legally authorized to work in the jurisdiction of employment., • Must possess a valid state driver’s license., • Must be able to exercise good judgment and follow directions/directives from supervisor/management. Additional knowledge and skills: • Hospitality Skills: Excellent guest service skills with an energetic, outgoing, and guest-obsessed personality. Must be able to anticipate and act on guest needs and prioritize guest requests and job responsibilities by exhibiting a keen ability to multi-task in a fast-paced environment. Must be able to maintain professionalism and confidentiality., • Language Skills: Ability to read and comprehend documents such as safety rules, operating instructions and procedure manuals, and for safety-sensitive tasks, in English. Ability to write simple correspondence., • Critical Thinking / Reasoning Ability: Ability to carry out simple one or two-step instructions. Ability to deal with standardized situations with only occasional or no variables., • Interpersonal Skills: Ability to get along and work well with others. Excellent interpersonal skills for effective collaboration with team members and service to guests., • Multitasking: Ability to handle multiple tasks simultaneously while maintaining attention to detail. Computer Skills: Ability to use a computer, learn necessary company software and timely complete Signature’s computer-based training programs. Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay range for this position is $19.50 to $22.80 / hour. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Tuition reimbursement, • Training and Development, • Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Job Description Based in Western New York, Schiappa Restaurants Inc. is a proud franchisee of Arby's, operating restaurants in the local market. We are guided by our values and believe that Attitude Equals Success. As with any goal we set, our attitude about achieving those goals can equal our success. We Offer • Competitive Bonus Program, • Full-Time & Part-Time Shifts, • Health Insurance, • Flexible Schedules, • Employee Discounts, • PTO, • Employee Rewards & Recognition Program, • Opportunities for Career Growth and Advancement What Will You Do? As the Restaurant Team Leader, you will assist in guiding the team to create a positive guest experience. Whether it's setting the tone for the team when you're in charge or upholding the highest standards of quality, safety, and cleanliness, your crew will count on you. Top 5 Job Responsibilities • Ensure your team provides outstanding service and satisfied guests., • Hire, train, coach and develop the team., • Utilize company systems and tools to run a great restaurant every shift, every day., • Implement restaurant controls, especially cash and inventory controls., • Set and meet restaurant goals for service, operations and financial results. At Schiappa Restaurants Inc., we are goal-oriented. As the Restaurant Assistant Manager, you will work closely with the General Manager to achieve high performance in areas such as: Operations & Leadership • Operations Management, • Profit & Loss, • Guest Satisfaction, • Customer Service, • Speed of Service, • Quality Control, • Workplace Safety, • Food Cost Management, • Labor Cost Management, • Cash & Inventory Controls, • Utilizing all restaurant systems and tools, • Following government regulations, employment law, food safety requirements and company policies, • Implementing accounting and operational controls, • Coaching and developing team members Whether you're looking for a change in your career or taking the first step into restaurant management, Schiappa Restaurants Inc. is a goal-oriented company where you can develop your skills and build a rewarding career. We look forward to hearing from you! If You're an Ideal Candidate, You Excel in These Areas: • Treating others with respect and communicating effectively, • Coaching and developing others, • Emotional resilience and patience, • Leadership, • Working in a fast-paced environment and thinking on your feet, • Holding yourself and your team to high standards of integrity and customer satisfaction, • P&L Management, • Operations Management, • Restaurant Management, • Managing Food Cost & Labor Cost, • Team Building and Employee Development Our HIRING Locations Include: 4827 Broadway Depew, NY 564 Dick Rd. Depew, NY 6845 Main St. Williamsville, NY 2300 Union Road, West Seneca, NY At Schiappa Restaurants Inc., our vision is to provide our guests with an outstanding restaurant experience and become their favorite destination for great food and service. Requirements • Must have a reliable vehicle and valid driver's license, • Must be ServSafe certified or capable of obtaining certification, • Ability to work in warm and cold temperatures, • Ability to stand for 8–10 hours, • Ability to lift up to 50 lbs., • Ability to climb ladders for general maintenance, • Ability to perform the following motions:, • Bending, • Squatting, • Twisting, • Pulling, • Reaching Equal Opportunity Employer Schiappa Restaurants Inc. is an Equal Opportunity Employer. All persons shall have the opportunity to be considered for employment without regard to race, color, religion, creed, national origin, ancestry, alienage or citizenship status, age, disability, gender (including pregnancy, childbirth and other related conditions), sexual orientation, genetic information/characteristics, veteran or military status, marital status or any other characteristic protected by applicable federal, state or local laws. ADAA Schiappa Restaurants Inc. will endeavor to make a reasonable accommodation/modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operation of the business, in accordance with applicable federal, state and local law. Employer: Schiappa Restaurants Inc. Brand: Arby's Position: Restaurant Team Leader \nCompany Description In a world full of quick service options, Arby's is seeking to be different and better. We want to be different for our customers and different for our employees. When you work at Arby's, it will be more than a job -- it will be a place that prioritizes your growth and development while having a ton of fun. We're proud of the food we serve, our innovation and our team. Our goal is to be the best in the business, and we can't do that without great people like you. In a world full of quick service options, Arby's is seeking to be different and better. We want to be different for our customers and different for our employees. When you work at Arby's, it will be more than a job -- it will be a place that prioritizes your growth and development while having a ton of fun. We're proud of the food we serve, our innovation and our team. Our goal is to be the best in the business, and we can't do that without great people like you.

Job Description SHIFTS: ROTATING CONTINENTAL Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. As a result of continued growth Bericap has a full-time, hourly opening for a Production Team lead - Process Technician reporting to the Plant Manager. Position Purpose Ensure manufacturing operations run smoothly by keeping a close eye on machine performance, performing regular maintenance, troubleshooting technical problems, and actively working on process improvements. This role ensures production targets, quality standards and safety protocols are met while promoting a positive team environment and a continuous improvement culture. This position is a primary point of contact between front-line production staff and management, ensuring effective communication, workflow, and resource management throughout the shift. Responsibilities Injection Process Operation • Monitor daily process parameters on the injection machines, • Optimize cycle time while ensuring conforming product, • Establish optimum baseline process and calculated alarm parameters, • Responsible for advanced process analyses, • Lead or participate in mold and product design/drawing reviews when required, • Liaise with outside suppliers and machine manufacturers to develop process improvements, • Participate in tooling buy offs, • Operate injection molding machines, vision systems, down-stream equipment, and material feed equipment, • Assist with the start-up of new equipment by developing process parameters and implementing operator training plans, • Monitor critical process parameters on the injection machines, vision systems, color feeders, color blenders and secondary systems to include scheduled process and equipment audits, • Lead role in advanced process analysis: identifying process improvements that result in cost savings, improved part quality, and improvement of related KPI’s, • Conduct process related training for operators, • Participating in sample requests issued, and process related activities focused on identifying root causes Production • Monitor shift output to ensure schedule and delivery target attainment, • Issue repair and other required work orders, ensuring timely follow-up, • Partner with planning and maintenance to ensure that scheduled or emergency maintenance on equipment is achieved as quickly as possible, • Respond to incidents and implement preventative measures, • Enforce 5S standards across the plant floor to ensure a clean, organized, and efficient work environment, • Ensure that any Joint Health and Safety Committee (JHSC) members are afforded adequate time to meet their committee responsibilities, • Monitor shift quality to ensure closures meet Bericap standards and respond to identified quality issues on a timely basis Personnel Supervision • Handle all employee data with the upmost confidentiality and discretion, • Manage time off requests and flag any staffing gaps with HR and Production Team Leader, • Ensure employees, temporary personnel and visitors on the plant floor are compliant with GMP and safety policies and procedures, • Plan, document and carry out sufficient cross training to provide adequate backup of all job functions in partnership with the Production Team Leader and HR, • Ensure all employees sign in and out using On-Location System (WOL), • Facilitate onboarding for new hires and temporary personnel, ensuring proper documentation, • Track employee attendance and ensure any such issues are identified in accordance with the policies outlined in the Employee Handbook, • Ensure all Bericap policies and procedures are followed, • Arrange shift coverage for Production personnel when necessary, • Review and approve time-off requests and payroll timesheets with accuracy and within prescribed deadlines, • Motivate production personnel to work as a team, both within production as well as other departments, • Work with employees to further develop their skills and identify future areas of career interest, • Participate in the management of employee performance through regular feedback, coaching and annual performance reviews, • Partner with HR and the Plant Manager with respect to potential disciplinary actions, • Document and deliver any disciplinary actions, • Conduct a shift huddle prior to shift start emphasize on safety concerns, production targets, any major changes, coordinate workflow and assign tasks to team members Other • Conduct evacuation drills as required, • Attend communication and production meetings, • Champion and participate in the See It, Sort It, Report It program, • Ensure all quality, food safety, safety, environmental as well as all other Company policies and procedures are followed, • Ensure that all quality, food safety, safety, and environmental issues are reported to the appropriate manager or supervisor, • Ensure all work is conducted safely and without injury. Skills & Abilities • Effective written and verbal communication skills, • Effective organizational skills with attention to detail, • Advanced injection molding knowledge related to troubleshooting and resin behavior, • Advanced problem-solving skills focused on root cause analysis and lessons learned, • Working knowledge of basic hydraulic/electric/pneumatic/vision systems, • Effective time management skills, • Blueprint reading, • Proficiency in Microsoft Excel and Word, • Ability to thrive in a dynamic collaborative team environment, • Adaptability, • Proven leadership and team management skills, • Excellent communication skills Education • Degree or technical certification preferred, • Related production/leadership courses and seminars an asset Experience • 5-7 years’ experience with injection mold machines Reporting Structure • Position reports to the Plant Manager Benefits Medical, dental and vision insurance FSA and Dependent Care Accounts Company paid short term, long term and life insurance 401(k) plans with company matching contributions Paid Time Off Tuition Reimbursement Employee Recognition Program Employee Fitness Reimbursement About Bericap Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. Bericap’s plastic closures incorporate tamper evidency, sealing features, pouring features, and are backed by our R & D centers in the U.S. and Europe. Bericap produces more than 91 billion closures annually with 26 plants operating in 21 countries and employs more than 4,000 people. The quality of people is the one element that distinguishes one company from others; Bericap recognizes that it is the total sum of its employees' talent and professionalism that is responsible for its success. For this reason, the Company makes every effort to attract the finest professionals, nurture their growth, and place their capabilities at the service of its customers. Bericap NY, LLC is an Equal Opportunity Employer and administers all personnel practices without regard to race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity or expression, marital status, veteran status, genetics or any other category protected under applicable law. You should be proficient in: • Continuous Improvement, • Food and Beverage Manufacturing, • Food Safety and Quality Assurance (FSQA), • Programming Machine Vision Systems, • ISO 9001 Certification Experience, • Root Cause Analysis, • Blueprint Reading, • Microsoft Excel

Job Description Job Title: Maintenance Mechanic Department: Maintenance Reports To: Operations Manager Job Status: Full-Time FLSA Classification: Non-Exempt Hours: Monday – Friday, 7 a.m. – 3 p.m. Location: Cheektowaga, NY (onsite) Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic, and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor-trailer and bus industries. Our commitment to quality and durability assures us a leading edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to customer needs. Job Summary This position is responsible for the high-standard performance of the company’s production equipment, as well as the upkeep, troubleshooting, and repair of mechanical systems throughout the company’s main facility. This role offers the opportunity to apply your knowledge by working with the engineering and quality teams on equipment design, testing, and modifications. The successful candidate must be proactive and flexible, able to respond competently to urgent situations, and handle stressful conditions calmly and decisively. Responsibilities: • Perform preventative, predictive, and corrective maintenance on production machinery and facility equipment., • Troubleshoot and repair mechanical equipment, including motors, gearboxes, bearings, hydraulic and pneumatic systems., • Perform MIG, TIG, and/or stick welding as required., • Design, build, modify, and repair jigs, fixtures, tooling, work holding devices, machine guards, brackets, frames, platforms, and other manufacturing aids., • Work closely with production and engineering personnel to identify opportunities to improve equipment reliability, productivity, ergonomics, safety, and product quality., • Develop practical solutions to manufacturing problems through mechanical design, fabrication, and equipment modification., • Take measurements and create sketches or basic drawings for custom parts, fixtures, and equipment modifications., • Build and test jigs and fixtures to ensure proper fit, function, repeatability, and operator usability., • Modify existing tooling and fixtures to improve production efficiency, quality, and ease of use., • Fabricate components from steel, stainless steel, aluminum, and other materials as required., • Diagnose equipment failures and determine the appropriate repair or replacement of components., • Perform equipment alignments, adjustments, lubrication, and component replacement., • Use hand tools, power tools, welding equipment, cutting equipment, drill presses, grinders, and other shop machinery safely and effectively., • Assist with installation, relocation, and modification of machinery and production equipment., • Respond promptly to equipment breakdowns and minimize production downtime., • Maintain accurate maintenance records and document completed repairs, projects, and preventative maintenance activities., • Inspect equipment and tools for potential safety, mechanical, or operational issues and recommend corrective actions., • Maintain a clean, organized, and safe maintenance and fabrication work area., • Follow all company safety procedures, OSHA requirements, lockout/tagout procedures, and applicable welding and hot-work practices., • Work cooperatively with production, engineering, quality, and other maintenance personnel., • Perform other maintenance, fabrication, and improvement projects as assigned. Education & Experience: • High school diploma or equivalent (preferred), • Skills training at vocational college, • Minimum 2 years of job-related experience, • Experience working in the manufacturing industry, • Demonstrated welding and metal fabrication experience. Required Skills & Abilities: • Proficient in welding, electrical, machining, fabrication, and facilities, • ·Strong mechanical troubleshooting and repair skills., • Ability to design and build jigs, fixtures, tooling, and other custom devices used in a manufacturing environment., • Ability to visualize mechanical solutions and translate concepts into functional fabricated components., • Basic knowledge of hydraulic and pneumatic systems., • Ability to safely operate common maintenance and fabrication tools and equipment., • Ability to work independently, prioritize tasks, and respond effectively to equipment breakdowns and manufacturing needs., • Expert knowledge of standard equipment and facility safety regulations, • Ability to read and interpret mechanical drawings, equipment manuals and schematics, • Preferred CAD i.e. SolidWorks knowledge, • Ability to troubleshoot equipment issues, • Ability to effectively communicate with facility managers and visiting contractors, • Strong attention to detail and commitment to workplace safety. Safety Responsibilities: • Wear the appropriate PPE in the required areas of the building and according to the scope of work being performed, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Must be able to stand for long periods of time, • Ability to walk the entire facility without difficulty, • Must be able to occasionally carry or lift up to 50 pounds, • Possesses strong coordination and dexterity, • Ability to work around machinery, noise, heat, dust, and other industrial conditions., • Ability to work overtime, weekends, or respond to emergency maintenance needs when required. Perks: • Health, Dental, Vision, Life and AD&D, and Voluntary Insurance Coverages, • 401(k) program with company match, • Wellness Program, • ASTM-Approved Safety Shoe Balance Program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. \nCompany Description Our Story Over a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets. Our primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent. Our active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user. While we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers. Our Story\n\nOver a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets.\n\nOur primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent.\n\nOur active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user.\n\nWhile we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers.

Job Description Overview Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Shift Leader and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR SHIFT LEADERS DO As a Shift Leader, you’ll run the show and be responsible for all center operations (including cash accountability and key control) in the absence of your General Manager, Assistant General Manager, Manager, or Supervisor. And you’ll do it all while providing a great in-center experience for our guests. A SHIFT LEADER'S DAY-TO-DAY • Work directly with the center’s management team to ensure our model of exemplary guest service is being followed 100% of the time., • Maintains quality service by establishing and enforcing organizational standards., • Maintains friendly, courteous, polite and helpful customer service through employees to ensure that each visit by a customer results in personalized service, with great food and beverage that is promptly delivered in a clean and inviting environment., • Provides information on center programs and services, promotions, pricing and specials., • Answers phones in a professional and pleasant manner and take reservations., • Remains highly visible by spending a majority of time walking the center observing employee/customer interactions and providing leadership for the staff., • Addresses customer complaints and disruptions in a professional manner., • Tracks lane availability, assigns open lanes, prepares for leagues and starts leagues on time., • Maintains a safe environment for employees and customers., • Addresses employee relations issue during shift as appropriate., • Follows cash control procedures including preparation and transportation of daily deposits. Completes opening/closing cash procedures to include preparing reports by collecting, analyzing and summarizing information and submits to Center Management for review and approval., • Unloads, stocks and maintains required inventory level., • Maintains quality of product and monitors all service equipment., • Inspects facility for compliance with occupational, health and safety regulations. Ensures that employees are following safe working practices and have a working knowledge of all safety practices and procedures. WHAT IT TAKES • Optional: HS Diploma (Bachelor’s preferred), • A commitment to great guest service, • Solid communication skills, • Strong team player, • Ability to thrive in a fast-paced environment PERKS (MORE REASONS YOU’LL LOVE YOUR JOB) • Free Bowling!, • $1 Arcade Play, • 20% off Events, • 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: • Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: • Evening shift, • Night shift Weekly day range: • Weekend availability Work Location: One location

Job Description JOIN OUR TEAM! RECEIVE A $200 SIGNING BONUS! Pay Rate: $18.00 per hour Hyde Park Hospitality, LLC (HPH) is a strategic partner with Airport Dimensions and Sodexo at The Club - located within the Buffalo Niagara International Airport. HPH brings both experience and expertise to every level of food service and customer care. The Club is looking for a Full-Time Team Lead and MUST have open availability. The work of the Team Lead includes: working within established corporate policies and procedures to achieve customer satisfaction, company standards of quality and safety, through quality customer service, communication and general problem solving, as well as coordinating administrative and operational activities of assigned team members. In addition, the Team Lead shall perform a full range of bartender, concierge and customer service duties in support of company and customer operations. The Team Lead will have proficient knowledge of all operational policies and procedures and the general management of all positions. Team Lead Job Functions: • Interacting with airline/airport passengers via a premier clubroom/bar environment, • Responsible for coordination of assigned team members in accordance with the Company's policies and applicable laws, • Coordinating with Lounge Manager to reorder liquor and food inventory for assigned customer or lounge, • Coordinating with Lounge Manager to resolve service issues requested by the guests in assigned customer or lounge, • Meeting customer and passenger needs through communication and courteous customer service skills, • Monitoring number of alcoholic beverages served to passengers and alert management to potential problems, • Verifying and/or performing daily inventory count, • Maintaining a thorough knowledge of all required regulatory agency requirements, • Maintaining current state approved Responsible Alcohol Management certification and/or Food Handlers / Managers Permit, if applicable, • Possessing basic working knowledge of alcoholic beverages, • Maintaining a neat work environment, kitchen and passenger seating area including picking up and washing dirty dishes, disposing of trash, etc., • Restocking snack, coffee, cups, glasses, ice, etc. in all service areas, • Completing paperwork related to daily liquor usage/inventory/orders, • Performing administrative tasks as required Team Lead Job Requirements: • Pass and maintain all necessary licenses and certifications including, but not limited to, state liquor seller-server certification (TIPS/TABC) and state/local health department food handler certification, • Must be able to stand during scheduled shift, • Ability to handle the stress of a fast-paced work shift up to ten (10) hours, • Ability to read and interpret basic documents, and comply with all company policies and procedures, • Motivate assigned team members to achieve desired results, • Ability to bend, climb up/down, crouch, hear, kneel, reach, speak, stand, turn, twist, walk, • Must be able to lift 40 pounds, 40 inches high without the aid of another person, • Ability to perform tasks safely and according to established procedures to prevent personal injury, injury to others and avoid damage to the environment, facilities, and equipment, • Personal appearance and grooming that will present a favorable corporate and customer image, • Must be able to pass and obtain security background check and clearance to work in airport environment, • Report to work on a regular and timely basis. Benefits: • Medical Insurance (Health, Dental, Vision), • Disability Insurance, • Vacation and PTO, • 401K Plan with generous Company Matching, • Employee Assistance Program (EAP), • Employee Corporate Discounts for nationally recognized products and services (childcare, electronics, entertainment, hotels, home, groceries, restaurants, auto, travel, and pets) ABOUT THE COMPANY Hyde Park Hospitality (HPH) is a young—but dynamic and fast-growing—company built on deep roots in the food business. HPH earned Crain’s Fast 50 Award in 2026 for being one (ranked 30th) of the fifty fastest growing businesses in the Chicago-area! We provide services ranging from airport concessions, management staffing, brand licensing, to contracted food and facilities management. With a 75% diverse senior management team, HPH values diversity and welcomes everyone with necessary qualifications and experience, regardless of race, gender, sexual orientation, age, disability, veteran status, and any other protected status, to apply. Learn more about us at hph-us.com.

Job Description We are searching for friendly and energetic full-time Shift Supervisors at our locations in Williamsville, NY for mornings (6am-2pm) & afternoons (1pm-9pm) to ensure that all restaurant operations run smoothly. Your responsibilities will include overseeing the activities of restaurant staff, expediting customers' orders as needed, and maintaining a clean, well-run restaurant. To be successful as a Shift Supervisor, you should exercise effective management skills and take necessary disciplinary actions to address poor staff performance. Ultimately, a top-performing Shift Supervisor should be able to achieve exceptional customer service and ensure that customers have a pleasant restaurant experience. Summary/Objective: Reporting to the Restaurant Manager(s) is responsible for managing restaurant shift operations at our franchise owned Tim Hortons restaurant(s). This includes overseeing hourly employees, facilities, and equipment to ensure that our high standards around people, product, cleanliness, and exceptional customer service are consistently met. Job Description The following job description generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties. Minimum Job Entry Requirements: • High school diploma or GED (must be at least 18 years of age), • Minimum of 3 months previous food service management experience, • ServSafe Manager Certified, • Strong problem-solving, organization, and time management skills, • Excellent knowledge of Tim Hortons products and procedures, • Action and results-oriented mindset, • Strong interpersonal skills, including motivating, delegation, conflict management, respect for others, and active listening, • Excellent communication skills (written, verbal, composure) Responsibilities & Tasks: Customer Service: • Lead by example in demonstrating and reinforcing positive customer service behaviors, • Respond to customer service complaints, resolving problems, and turning negative situations into positive ones, • Assist in scheduling staff breaks and tasks to maintain high Tim Hortons standards throughout the day, • Be flexible on the floor to troubleshoot and address any issues as needed People Management: • Pre-screen and interview employees to fill various openings, • Support the restaurant's training program and ensure employees have the necessary tools and support, • Supervise the performance of hourly employees during shift, ensuring alignment with company policies and taking corrective action when necessary • Stay updated on health and safety regulations and employment legislation, • Provide ongoing performance feedback to management about any issues with operations. Driving Sales: • Ensure proper merchandising of products, • Promote the principles of REV standards, • Evaluate and focus on areas requiring greater performance from employees Operational Analysis: • Maintain a productive and safe work environment, following all company operating, food safety, security, health andsafety, and employment standards, • Monitor food flow and equipment maintenance to serve safe food to customers, • Stay informed of new information through available resources, • Monitor and promptly respond to company email messages Physical Demands and Working Environment: The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Work is performed in a busy quick food service restaurant, where employees are communicating frequently with customers and other employees. Employees in this role must be able to prepare a variety of food and beverage items oversee and train hourly employees. There are frequent interruptions, tasks, and position changes. Physical: Primary functions require sufficient physical ability and mobility to work in a restaurant setting with multiple employees; to stand for prolonged periods of time; to stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight from <5 – 50 lbs.; to operate office equipment and cash register system requiring repetitive hand movement and fine coordination including use of a computer keyboard and electronic devices; occasional exposure to cold/freezing below temperatures and high heat temperatures, and to verbally communicate to exchange information. Vision: See in the normal visual range with or without correction. Hearing: Hear in the normal audio range with or without correction. Ability to use and wear a headset for long period of time to take and process customer orders. Other: Regular and predictable attendance is an essential function of this job. For full-time position, Shift Supervisors are expected to work a minimum of 37.5 hours per week. The maximum number of hours is generally 40, unless over-time is approved by a District Supervisor. For part-time positions, Shift Supervisors are expected to work a minimum of 16 hours per week and a maximum of 39 hours per week. This job description in no way states or implies that these are the only duties to be performed by this employee. The company maintains the right to add or change these duties of this position at any time. NOTE: By applying for this position, you acknowledge and understand the above job description. This job description in no way states or implies that these are the only duties to be performed by an employee in this role. It is not exhaustive and may be subject to change. The company reserves the right to assign additional duties and responsibilities as needed. Clark Holdings Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As Part Of Our Team, You Will Experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. General Purpose: The Retail Associate is responsible for ensuring our Customers have a positive shopping experience. The Associate makes eye contact, smiles, and greets all Customers in a courteous and friendly manner, treats fellow Associates with respect, efficiently follows all company best practice standards as outlined in all work centers, maintains a clean work area at all times, and ensures proper merchandise presentation. The Retail Associate is expected to be engaged in these tasks as assigned during all working hours and will be expected to perform a range of functions in all areas of the Store as business needs require. The Associate may be requested to perform additional tasks in specific situations, if performance of these tasks will help achieve our Customer service and operational goals. Essential Functions: • Understands that safety is the number one priority and practices safe behaviors in everything they do., • Maintains a high level of awareness on the sales floor to create a safe and secure shopping environment for everyone. Maintains clutter free, clear egress to emergency exits. Immediately corrects or reports any unsafe conditions or practices to Store Leadership., • Treats all Customers and Associates with respect and courtesy; is friendly and professional at all times. Recognizes fellow Associates using Company recognition programs., • Assists Customers in any way necessary - is register-trained, assists Customers with merchandise, and answers Customer questions in a polite and knowledgeable manner. Greets all Customers by making eye contact, smiling and saying "hello" throughout the Store as well as saying "thank you" with every register transaction., • Provides prompt and efficient responses to Customers at all times. Responds to Customer Service calls immediately. Handles all Customer issues in a courteous and helpful way, calling a member of the Store Leadership when needed., • Represents and supports the Company brand at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, replenishing restroom supplies, and disinfecting high-touch areas including the front-end, sales floor and restrooms to help maintain merchandise, customer and Team areas., • Maintains a professional appearance and adheres to the Company's dress code at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, and replenishing restroom supplies to help maintain merchandise, customer and Team areas., • Performs daily assigned sizing and recovery per company best practice to ensure a neat, clean and organized store that is well-maintained and efficiently merchandised to standards., • Expedites newly received merchandise receipts to the sales floor with a sense of urgency, merchandising all items per company best practice to the monthly presentation guidelines and maintaining merchandise/brand name familiarity within departments to assist Customers., • Understands the Loss Prevention Awareness program, the Shortage Highway, the Store Protection Specialist (SPS) position (where applicable), and merchandise protection standards., • As a representative of Ross Inc., demonstrates integrity and honesty in all interactions with Associates and Customers. Safeguards confidential information, cash and credit card information, and merchandise., • Follows all Mark-Out-of-Stock (MOS) policies, including the identification of MOS merchandise, proper processing of each piece and the notification of Store Leadership to review and approve all disposals., • Follows all policies and procedures concerning cash, check, charge card and refund transactions, voids and offline procedures. Maintains a high level of awareness and accuracy when handling bankable tenders., • Demonstrates a sense of urgency to efficiently perform their role. Maximizes productivity by executing all Store best practices and minimizing steps and touches in their work flow. Competencies: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. Qualifications And Special Skills Required: • Effectively communicate with Customers, Associates and Store Leadership in a friendly, respectful, cooperative and pleasant manner., • Ability to perform basic mathematical calculations commonly used in retail environments. Physical Requirements/Ada: • Ability to use all Store equipment, including PDTs, registers and PC as required., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Ability to regularly bend at the waist, squat, kneel, climb, carry, reach, and stoop., • Ability to occasionally push, pull and lift more than 25 pounds., • Ability to use janitorial equipment, rolling racks, ladders and other assigned supplies., • Certain assignments may require other qualifications and skills., • Associates who work Stockroom shifts: Ability to regularly push, pull and lift more than 20 pounds. Supervisory Responsibilities: None DISCLAIMER: This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. The base pay range for this role is $16.60 - $17.10. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location. Benefits offered to all Associates include Accident, Critical Illness, Vision, Auto, Home, and Pet insurance programs; Associate Discount, Identity Protection, Associate Purchase Program, Benefit Hub Discount Mall, Employee Assistance Program and Commuter Benefits, 401K (service requirements), Employee Stock Purchase Program, Ross Cares Fund, College Discounts, Sick Pay (where legally required) and Referral Bonuses. In addition, all Full-Time Associates, including FT Retail Associate, Area Supervisor, Assistant Store Manager and Store Manager, are eligible for extended benefits offered including Medical/Dental/Vision Health Insurance, Legal Insurance, Vacation Buy, Flexible Spending Account, Health Savings Account, Life/ADD Insurance, Long-Term Disability, Enhanced Maternity and Parental Leave Benefit, Vacation Pay accrued at a rate of 10 days/year after eligibility commences, 9 Personal and Company Holidays. AS, ASM and SM Associates in Stores and Exempt Corporate and Buying Office roles are also eligible to receive a Bonus based on individual and business performance.

Starbucks is seeking Baristas / Customer Service Representatives to prepare beverages, assist customers, and support daily store operations in a fast-paced coffee shop environment. Baristas are responsible for taking customer orders, operating the register, preparing coffee and espresso drinks, making cold beverages and food items, maintaining a clean work area, restocking supplies, and providing friendly customer service. Employees must follow Starbucks drink recipes, food safety guidelines, and customer service standards while working efficiently during busy periods. This position typically pays $15 to $20 per hour, and employees may also receive tips, overtime pay, holiday pay, and shift differential pay for early morning or holiday shifts. Baristas are responsible for preparing drinks to company standards, operating espresso machines, handling cash and card transactions, cleaning equipment, stocking cups and ingredients, assisting with drive-thru orders where applicable, and maintaining store cleanliness. Employees must work as part of a team to ensure orders are prepared quickly and accurately. Full-time and part-time employees may be eligible for benefits including health, dental, and vision insurance for eligible employees, 401(k) with company match, paid time off, Starbucks partner discounts, free drinks during shifts, tuition assistance programs, and opportunities for advancement into Shift Supervisor or Store Manager roles. Starbucks also offers tip sharing and potential performance-based raises.

Burger King is seeking a Cook I (Food & Beverage) team member to prepare food items, maintain kitchen operations, and ensure food quality and safety standards are met. Cooks are responsible for preparing menu items such as burgers, chicken sandwiches, fries, and breakfast items according to company recipes and procedures. Employees operate grills, fryers, and other kitchen equipment, assemble food orders, restock kitchen inventory, clean kitchen stations, and maintain food safety and sanitation standards. This position typically pays $14 to $18 per hour, with opportunities for overtime pay, night shift pay differential, holiday pay, and performance-based raises depending on location and experience. Cooks are responsible for preparing food quickly and accurately, monitoring food quality, maintaining proper food temperatures, stocking kitchen ingredients, cleaning kitchen equipment and workstations, assisting with deliveries, and following company food safety and sanitation procedures. Employees must work efficiently during busy periods and communicate with team members to ensure orders are completed on time. Full-time and part-time employees may be eligible for benefits including flexible scheduling, employee meal discounts, paid time off for eligible employees, health insurance for full-time employees, and opportunities for advancement into Shift Leader, Kitchen Supervisor, or Assistant Manager roles. Some locations may also offer performance bonuses or referral bonuses.

Burger King is seeking Team Members to assist with daily restaurant operations including customer service, food preparation, and maintaining restaurant cleanliness. Team Members may work in the front counter, drive-thru, or kitchen depending on shift needs. Responsibilities include taking customer orders, operating the register, preparing food items, assembling orders, working the drive-thru, handling payments, restocking supplies, cleaning tables and work areas, and maintaining food safety and sanitation standards. This position typically pays $13 to $17 per hour, with opportunities for overtime pay, holiday pay, overnight shift differential, and performance-based raises depending on location and experience. Team Members are responsible for providing fast and friendly customer service, preparing food according to company standards, operating kitchen equipment such as grills and fryers, assembling food orders, maintaining cleanliness in the kitchen and dining area, restocking inventory, and working as part of a team to keep the restaurant running efficiently. Full-time and part-time employees may be eligible for benefits including flexible scheduling, employee meal discounts, paid time off for eligible employees, health insurance for full-time employees, and opportunities for advancement into Shift Leader, Assistant Manager, or Restaurant Manager roles. Some locations may also offer employee referral bonuses and performance incentives.

McDonald’s is seeking Crew Team Members to assist with daily restaurant operations including customer service, food preparation, and maintaining restaurant cleanliness. Crew Members may work in the front counter, drive-thru, or kitchen depending on shift needs. Responsibilities include taking customer orders, operating the register, preparing food items, assembling orders, working the drive-thru, handling payments, restocking supplies, cleaning tables and work areas, and maintaining food safety and sanitation standards. This position typically pays $13 to $17 per hour, with opportunities for overtime pay, holiday pay, overnight shift pay differential, and performance-based raises depending on location and experience. Crew Members are responsible for providing fast and friendly customer service, preparing food according to company standards, operating kitchen equipment such as grills and fryers, assembling food orders, maintaining cleanliness in the kitchen and dining area, restocking inventory, and working as part of a team to keep the restaurant running efficiently. Full-time and part-time employees may be eligible for benefits including flexible scheduling, employee meal discounts, paid time off for eligible employees, health insurance for full-time employees, tuition assistance programs, and opportunities for advancement into Shift Manager or Department Manager roles. Some locations may also offer employee referral bonuses and performance incentives.

Job Description Senior Estimator / Project Manager – Bid and Manage Heavy Civil & Construction Projects for Mark Cerrone, Inc. Job Overview • Company: Mark Cerrone, Inc., • Salary/Pay Rate: $125,000 - $150,000 annually (based on experience), • Location: Niagara Falls, NY - Open to candidates who can relocate to the area, • Job/Employment Type: Full Time, • Schedule: Full-time, On-site, • Project Scope: Heavy Civil, Roads, Underground Utilities/Piping, Site Development, Highway/Bridge, and General Building Construction; exposure to environmental or demolition work is a plus. Typical Project Size: 100K–100M, • Mandatory Licenses & Certifications: OSHA The Opportunity You will step into a high-impact, hands-on role where you personally bid and build heavy civil and general construction projects. You will own your work from the initial cost estimate through final field closeout and margin realization. This dual seat allows you to maintain full accountability over your numbers and actively shape project delivery in Western New York. How You Will Make an Impact • Prepare detailed unit-price estimates for heavy civil, underground utility, and NYSDOT public works projects., • Price self-performed work using real production rates, crew sizes, and company-owned equipment data., • Solicit, evaluate, and level subcontractor quotes for building construction to close scope gaps before bid day., • Own project budgets and margins from award through closeout, reviewing cost and production performance against budget and addressing variances early., • Build, own, and maintain project baseline schedules and three-week look-aheads, manage sequencing and float, and require written recovery plans when subcontractors or project conditions threaten critical milestones., • Chair subcontractor coordination meetings and hold subcontractors accountable to contractual schedule and performance requirements through documented commitments, written notices, corrective actions, and escalation when necessary., • Maintain contemporaneous project documentation, including manpower records, notices, contract references, and back-charge support sufficient to withstand owner or subcontractor challenge., • Direct daily logistics with superintendents and foremen to ensure efficient labor and equipment utilization., • Develop project engineers and assistant project managers by involving them in estimating, buyout, scheduling, documentation, closeout, and overall project execution., • Manage the full change order process, negotiating price adjustments and updating contract records promptly., • Maintain strong, transparent relationships with agency officials, design engineers, and project owners. Required Qualifications & Experience • Minimum of 6 years of combined estimating and project management experience, including personally bidding and managing construction projects from bid through closeout., • Experience across both heavy civil construction — including roads, piping, underground utilities, and site work — and general building construction., • Proven track record of independently pricing and winning competitively bid public or private work., • Experience with public and owner-agency construction, including prevailing wage, certified payroll, MWBE/DBE/SDVOB participation requirements, and contractual liquidated-damages obligations., • Experience working in a union construction environment, with an understanding of union work rules, jurisdiction, crew composition, staffing, sequencing, and their impact on field production., • Solid understanding of construction cost accounting, budget management, and financial margin tracking., • Demonstrated capability to accurately read and interpret complex plans, specifications, contract documents, and geotechnical reports., • Strong project scheduling experience, including developing and maintaining baseline schedules, managing sequencing and float, and addressing schedule recovery when required., • Strong subcontractor management experience, including enforcing contractual requirements, issuing written notices, and managing performance or schedule escalations., • Proven experience mentoring and developing assistant project managers, project engineers, or emerging construction professionals, with the ability to teach both estimating and project execution while maintaining high performance standards., • Strong verbal and written communication skills, including the ability to negotiate subcontracts, document field and contract issues, and communicate effectively with owners, agencies, engineers, subcontractors, and field teams., • Proficiency using Microsoft Office programs, particularly Excel, with the ability to learn estimating and project management software., • Valid driver's license with a driving record acceptable to the company's insurance provider. Preferred Qualifications & Experience • 10 or more years of hands-on experience in heavy civil estimating and project management., • NYSDOT bidding and project administration experience., • Experience managing self-performing field crews and company-owned heavy civil equipment., • Demolition or environmental construction experience., • Experience taking over active projects mid-stream and successfully stabilizing cost, schedule, subcontractor performance, and project documentation., • Experience managing project closeout continuously throughout the project lifecycle, including maintaining current as-builts, progressing punch-list work, and confirming quantities with pay applications., • Comfort working within written project-management standards and defined subcontractor escalation procedures., • Experience with modern estimating, takeoff, and project management technology; familiarity with B2W Estimate, AGTEK, PlanSwift, Viewpoint, Bluebeam, or comparable systems is beneficial but not required., • Current OSHA 30 certification. Compensation & Benefits • Competitive salary with annual performance bonuses based on bid success and project margins., • Company vehicle allowance with full fuel reimbursement., • Comprehensive health insurance package with employer copay support., • 401(k) retirement plan featuring company matching contributions., • Employer-provided $20,000 life insurance policy., • Paid time off package including paid company holidays., • Provided technology package including laptop, mobile phone, and software licenses. About Us Mark Cerrone, Inc. is a premier Western New York contractor specializing in heavy civil, underground utility, site development, and general building construction. We pride ourselves on self-performing complex projects with our own field crews and equipment fleets. We offer a stable, safety-focused work culture where dedicated professionals take ownership of their work and build long-term careers. Mark Cerrone, Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Company: Davey Resource Group, Inc. Locations: Tonawanda, NY Additional Locations: NA Work Site: On Site Req ID: 227195 Position Overview Davey Resource Group (DRG) is seeking an experienced Ecologist/Project Manager to help grow and lead ecological consulting services throughout Western New York and the Great Lakes region. This is a high-impact leadership opportunity for a technical expert who enjoys building client relationships, managing complex restoration projects, mentoring staff, and shaping the future of ecological consulting in a growing market. DRG provides a full array of wetlands consulting, ecological restoration and maintenance, streambank/shoreline restoration and consulting services to clients in the private and public sectors. The ideal candidate is independent, client-facing, and technically strong, with hands-on experience conducting wetlands delineations and collecting other ecological field data. Candidates with an existing client portfolio or demonstrated success breaking into new service markets are strongly preferred. The position will leverage the strength of a nationwide team while maintaining a strong regional and local, operations-integrated presence. What You'll Achieve • Lead and expand ecological consulting services across New York and the Northeast., • Develop long-term relationships with public and private-sector clients., • Mentor emerging scientists and project managers., • Influence regional restoration and environmental compliance strategies., • Participate in strategic business development initiatives.Job Duties Position Description and Responsibilities: The selected candidate will work collaboratively with our project developers, biologists, and project managers. The position involves a variety of work including wetland delineations, 401/404 permitting, stream/wetland restoration design and construction, technical report writing, and management of a variety of projects that include monitoring, management and ecological restoration. The key focus of this position is to perform an active role in the development and management of new projects and providing service to existing clients. This includes preparation of proposals, project and crew management, networking, identifying new client relationships, and project opportunities. This may include attending conferences/workshops and public speaking. Job responsibilities include: Project Management & Client Service • Manage multiple ecological consulting projects from proposal through completion., • Develop project scopes, budgets, schedules, and resource plans., • Invoicing and labor tracking, • Performing final QA/QC of work performed and supervision of crews and subcontractors as merited., • Ensure successful delivery of client commitments while maintaining quality standards. Technical Leadership • Lead wetland delineations, stream assessments, habitat evaluations, and ecological restoration efforts., • Native and invasive plant ID., • Oversee technical reporting, regulatory permitting, and environmental compliance documentation., • Provide expert guidance on Clean Water Act Section 401/404 permitting. Business Development • Identify and pursue new project opportunities., • Prepare competitive proposals and technical presentations., • Expand relationships with existing clients and develop new service markets. Team Leadership • Mentor field staff, biologists, and project managers., • Coordinate subcontractors and project teams., • Promote a culture of safety, collaboration, and excellence. Travel Expectations: 25 to 50%, periodic travel throughout New York and the Great Lakes region should be expected. Qualifications Desired qualifications: • Potential candidates must be a college graduate with a minimum of a four-year degree in biology, botany, ecology, conservation, environmental science, or related fields., • 6+ years of progressively responsible experience in ecological consulting, environmental permitting, restoration planning, or related natural resource management disciplines., • Ability to manage multiple projects and deadlines with limited supervision., • Strong written and verbal communication skills, including client-facing interactions., • Ability to work independently and as part of a multidisciplinary team., • Proficiency with Microsoft Office and/or Google Suite; ability to learn company-specific compliance platforms., • Desired professional credentials may include ESA Certified Ecologist, PWS, CERP, and/or CPESC., • Existing client portfolio or demonstrated success expanding environmental services into new markets is preferred.Additional Information Full-time position. Compensation based on qualifications and experience. DRG offers competitive wages, excellent benefits and full-time position includes the option to buy company stock after one year. Pre-employment Drug Screen and Social Security verification required. The Davey Tree Expert Company and Davey Resource Group is an Equal Opportunity Employer. Davey is Employee Owned. What We Offer:* • Paid time off and paid holidays., • Opportunities for advancement., • All job specific equipment and safety gear provided., • 401(k) retirement savings plan with a company match., • Employee-owned company and discounted stock purchase options., • Group Health Plan., • Employee Referral Bonus Program: Send-A-Friend., • Locations throughout the United States in major cities and desirable areas., • Career Development Program supported by industry expert safety specialists and skilled trainers., • The Davey Tree Family Scholarship for children of employees., • Charitable matching gift program. *All listed benefits available to eligible employees. Company Overview DAVEY RESOURCE GROUP, Inc., headquartered in Kent, Ohio has opportunities for persons interested in the field of urban forestry. We are seeking teamwork-oriented individuals with excellent written and oral communication skills. Candidates should possess a professional work ethic with attention to detail and safety. Davey Resource Group provides a wide range of natural resource consulting services to clients in the private and public sectors, including urban forestry consulting and tree inventories, urban forest canopy assessments, and urban forestry management planning. Pre-Employment Drug Screen: Employment with Davey Resource Group is contingent upon the successful completion of a 5 panel pre-employment drug screen, screening for all federally regulated drugs including marijuana, where permitted by applicable law. Vehicle Monitoring Notice: Company vehicles are equipped with telematics technology, which utilizes GPS tracking and driver event monitoring (such as speeding, harsh braking, and other safety-related driving events). Vehicle event activity may be monitored for safety, compliance, and operational purposes only. Divisional Overview The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. Davey Resource Group, Inc., is a leader in the natural resource, environmental, and forestry consulting industries throughout the United States. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at Recruiting@davey.com. Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 25%

Job DescriptionBenefits: • Flexible schedule, • Training & development Benefits/Perks • Flexible Scheduling, • Competitive CompensationJob Summary We are seeking a Dishwasher to join our team! In this role, you will be responsible for loading the dishwasher with dirty dishes brought in by the bussers and unloading clean dishes. You will also be doing general cleaning tasks as assigned by the restaurant manager. The ideal candidate is hardworking and reliable! If you’re looking for an opportunity to get started in the restaurant industry, reach out today! Responsibilities • Remove food from plates, • Prerinse dishes, glasses, and tableware and load them into the dishwasher, • Unload dishwasher and put items away in proper areas, • Sweep and mop floors, • Monitor levels of detergent and cleaning supplies, • Follow all health and safety guidelines, • Participate in team meetings, • Perform other cleaning duties, as assignedQualifications, • Hard worker with a strong work ethic, • Positive attitude, • Attention to detail, • Ability to meet the physical demands of the job, including standing for long periods and bending repeatedly, • Access to a reliable car is mandatory

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Employee discounts, • Flexible schedule, • Opportunity for advancement, • Paid time off, • Training & development Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary We are seeking a Dishwasher to join our team! In this role, you will be responsible for loading the dishwasher with dirty dishes brought in by the bussers and unloading clean dishes. You will also be doing general cleaning tasks as assigned by the restaurant manager. The ideal candidate is hardworking and reliable! If you’re looking for an opportunity to get started in the restaurant industry, reach out today! Responsibilities • Remove food from plates, • Prerinse dishes, glasses, and tableware and load them into the dishwasher, • Unload dishwasher and put items away in proper areas, • Sweep and mop floors, • Monitor levels of detergent and cleaning supplies, • Follow all health and safety guidelines, • Participate in team meetings, • Perform other cleaning duties, as assignedQualifications, • Hard worker with a strong work ethic, • Positive attitude, • Attention to detail, • Ability to meet the physical demands of the job, including standing for long periods and bending repeatedly

Job Description Job Title: Program Staff | Direct Care StaffOrganization: My Place Home for the Homeless, Inc.Location: Buffalo, NY About Us:My Place Home for the Homeless, Inc. is a dedicated not-for-profit organization focused on providing comprehensive support to individuals experiencing homelessness. We offer both temporary/emergency housing and permanent supportive housing, along with essential resources such as job training, mental health and medical services, and access to transportation. Our mission is to empower individuals to regain stability and self-sufficiency through compassionate care and community-based solutions. Job Overview:We are now hiring various part-time shifts for Direct Care Staff in Buffalo, NY, to provide person-centered care tailored to meet the needs of individuals at My Place Home for the Homeless. This is a fantastic opportunity for professional growth, while making a difference! Starting pay is $17/hr, and based on shift. Responsibilities: • Empower guests and provide support and crisis intervention through trauma-informed care., • Ability to provide resource information or triage questions, for individuals and families we serve and to those who call shelter to apply/ask for information.• Communicate necessary guest information to day staff to keep them informed.• Follow and enforce Shelter Guidelines, Policies, and Procedures with Shelter Guests. • Support and assist guests with their shelter needs as they arise (ex. questions, concerns, hygienesupplies, cleaning supplies, bedding, food and more).• Maintain safety and security of shelter property, and report concerns to Shelter Manager/On-Callor to the authorities.• Ensure the privacy and safety of other guests by not confirming identity of other guests, and by notallowing anyone other than guests, staff, case workers or law enforcement on the premises.• Maintain the cleanliness of shelter through performing housekeeping tasks outlined in Staff task lists (ex. sweeping, mopping, disinfecting)., • Complete Shelter room checks with Shelter Manager as requested., • Complete Shelter Inventory and organizational/shelter upkeep duties as assigned., • Perform basic maintenance as needed (ex. changing light bulbs, plunging toilets) and report anymajor maintenance issues to Day Staff., • Document in shift notes at least once per shift and complete proper documentation; including but not limited to call logs, task list checks off lists, incident reports, reasonable suspicion forms, and mandated reporter documentation/reporting duties. • Ability to access and utilize the Sling schedule App for staff work schedules and be able to pick up/drop assigned work shifts as needed. • Complete shadowing tasks as assigned when new team members join the support staff team., • Attend regularly scheduled monthly meetings and trainings., • Maintain positive, supportive and respectful guest relations.• Support our focus on Diversity, Equity and Inclusion - this includes non-judgment of the ways that people may be different than you. Refrain from using slurs or other derogatory terms, gossiping or coming to conclusions based on race, gender identity, sexual orientation, primary language, religion, physical or mental ability or other ways that people that we serve or employ may be different than you. Requirements: • High school diploma., • Experience working in the mental health field or with disabled people., • First aid and CPR training is a MUST., • CNA or similar certification a plus., • Friendly, professional demeanor., • Strong emotional intelligence and listening skills., • Good physical fitness.WE ARE CURRENTLY HIRING: PART-TIME Sat-Sun 3pm-11pm, 11p-7a starting at $17.75/hr We offer employer-sponsored health insurance (full time employee only), retirement plan, paid sick days, and paid holidays. My Place Home for the Homeless, Inc. is an equal opportunity employer. We encourage candidates from all backgrounds, including individuals who have experienced homelessness, to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, or any other characteristic protected by law.

Job Description Do You Want To: Make good money, do what you love, work with great people, be at an amazing location, have room to grow in your career, gain and additional accredited certification, become a better bodyworker, work flexible hours with tips, receive free stretches and discounts on products? StretchLab Southtowns (Blasdell) wants people to join our growing team, who enjoy helping others on their health and wellness journey, are passionate about building community, are energetic and experienced and want to have fun doing it! Must have current certification or Bachlelors/Masters/Doctorate degree in one of the following: Massage Therapist, Athletic Trainer, Chiropractor, Yoga, Pilates, Dancer (Bachelors/Masters in Fine Arts w/ human anatomy/movement emphasis), Personal Trainer (NASM, ACE), Physical Therapy or Physical Therapy Aide OR Kinesiology, Sports Medicine, Exercise Science or Human Biomechanics degree. Benefits: • Part-time roll (with potential for full time) with a minimum of 15 hours per week. Must be over 3 days per week and Saturday shifts from 8-2pm are required. 5-6 hour shifts in an enjoyable studio environment with occasional outside/outdoor events., • Competitive hourly rate, plus gratuities, with possibility for raises at reviews every 6 months., • Fully Paid Flexologist Training and Certification (60+ hours)., • Growth opportunities: achieving different Flexologist Levels or Master Flexologist Level, • Skills sharing with your team members, including stretches with each other., • Staff outings and public events., • Free, 4x25 minute Stretch Session Monthly Membership (while employed), • Retail items at cost or discounted (while employed),, • Uniforms: including shirts, sweatshirts and grip socks., • Monthly studio goals to earn extra bonus. Responsibilities:, • Managing client care by delivering a best-in-class stretching experience, updating client notes after each session, performing MAPS., • Ensure the safety of clients in regard to proper stretch techniques and enforce StretchLab policies and safety rules., • Encourage and motivate clients throughout stretch sessions., • Build StretchLab membership and retain current clientele through personal interaction and outreach., • Attend staff meetings and required educational presentations., • Assist Sales Associate and General Manager with sales by delivering best-in-class knowledge in each session and tracking member's goals., • Participate in social media content to deliver a local and honest representation of our service., • Clean and maintain all equipment in order to ensure it is available for client use at any given time., • Using your certification and or degree in Massage Therapist, Athletic Trainer, Chiropractor, Yoga, Pilates, Dancer (Bachelors/Masters in Fine Arts w/ human anatomy/movement emphasis), Personal Trainer (NASM, ACE), Physical Therapy or Physical Therapy Aide OR Kinesiology, Sports Medicine, Exercise Science or Human Biomechanics as a base to build yourself as a certified Flexologist and work hands on with a variety of clientele to continue or build customized routines. Requirements: • Love of boutique fitness environment is a must-passion for stretching, mobility and flexibility., • Experience working in a fitness/health environment where you provide hands on training with a client, desired., • Fitness certification or degree required from one of the following: Massage Therapist, Athletic Trainer, Chiropractor, Yoga, Pilates, Dancer (Bachelors/Masters in Fine Arts w/ human anatomy/movement emphasis), Personal Trainer (NASM, ACE), Physical Therapy or Physical Therapy Aide OR Kinesiology, Sports Medicine, Exercise Science or Human Biomechanics degree., • Ability to create positive environment that welcomes all people., • Fantastic communication skills and exudes empathy., • Must love connecting with people and have a passion for helping them achieve goals., • Must be available to attend our 2-day Flexologist Training Program, which includes 20-25 hours of online tutorials prior to the 2 day hands on training and 20 hours of practice stretches., • Must be available for shifts Monday through Thursday for either 8:00am-1:30pm or 1:30pm-7:00pm, Fridays 8:00am-12:00pm or 12pm to 4:00pm and Saturdays 8:00-2:00pm. (Schedule is determined on studios need)., • Must be able to commit to the position for a minimum of 6 months. The franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee an all hiring decisions will be made by management. All inquiries about employment at this franchisee should be made directly to the franchise location and not to StretchLab Corporate. Powered by JazzHR 7I6WRug1ME

Job DescriptionDescription: Job Title: Lathe Operator Department: Machine Shop Supervisor: Production Manager FLSA Status: Hourly, Non-Exempt Shift Schedules: 2nd Shift: 3:30pm- 12:00am 3rd Shift: 11:30pm- 8:00am Summary of Job: The Lathe Machine Operator will be responsible for setting up, maintaining and operating Lathe machines to produce precision parts that meet quality standards. The Lathe Machine Operator will also be responsible for reading and interpreting blueprints, technical drawings and specifications, and working closely with other team members to ensure production goals are met, or exceeded. Essential Duties and Responsibilities · Setup and operate CNC Lathe machinery from blueprints. · Edit programs on the machine, when needed. · Check parts for accuracy according to blueprints. · Perform quality checks on parts for accuracy according to blueprints, and to ensure the product meets quality standards. · Identify product defects and work with QC team. · Set up tools and machinery for individual projects. · Perform all work in accordance with established safety procedures. · Follow all safety procedures and company policies. · Maintain a professional, clean and safe work area. · Other duties as assigned. Requirements: Knowledge, Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. · Lathe machining experience required. · Knowledge of FANUC controls. · Knowledge of 4th axis operation, a plus. · Able to use measuring equipment such as Calipers, Micrometers, Indicators, etc. · Able to read and interpret charts, drawings and blueprints. · Knowledge of safety procedures relating to operating Lathe machinery and handling materials. · Ability to interpret, edit, and program efficiently, when required. · Must be able to follow directions and perform work accurately and thoroughly. · Ability to use thinking and reasoning to solve a problem. · Attention to detail and ability to maintain accuracy. · Strong communication skills to work as part of a team. · Machinist tools required. · High School Diploma, or GED. Physical Job Requirements and Work Environment · Safety is our top priority! The safety, health and well-being of our team is our leading value! · Ability to lift or move up to 40 pounds. Use mechanical lift if weight exceeds 40 pounds. · Must be able to physically perform all job duties. Reasonable accommodations may be made to enable individuals to perform all essential job functions. · Machine shop. · Fast-paced production environment. · Use of hearing protection, eye protection and safety shoes required. Hearing and eye protection provided. Safety shoes and prescription safety eyewear covered by reimbursement program.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. We are currently looking for a Production Supervisor. Position will either be on 2nd or 3rd shift. Must have weekend and holiday availability. Key Responsibilities: Reports directly to Plant Manager. Manage all areas of the Packaging Department which include the following. • Continuous Improvement initiatives which include Capital Projects, • PM planning and measurements, • E-time coordination (HR Support), • Coordinate the movement of raw materials and finished product, • Labor planning, coordination and monitoring General Requirements: • Must be a minimum of 18 years of age., • Prepare weekly schedule and job assignments., • Distribute copies of schedule to all Departments., • Weekly copies of Manpower to the Plant Manager., • Plan and set up coverage for the upcoming weekend, this should be done prior to Friday., • Post and keep current employee qualification list., • Submit W/O as required for Safety, equipment repairs and process upgrade., • Report losses in Filling/Packaging Departments., • Maintain responsibility in all company guidelines, enforcing all Plant rules, Food Safety and GMP’s., • Comply with weekly Safety measurement requirements and Safety meetings., • Prepare for emergencies; know employees rally point, types of alarms, and phone numbers for contacts., • Ensure that food quality and food safety are the highest priority in the NCD facility. Demonstrated by, active participation from employees at all levels, including personal involvement in the auditing of procedures and processes. *In the absence of the Production Supervisor the Sanitation Manager will assume his/her duties. Daily Requirements: • Pre-shift meeting to review prior shift results, issues and opportunities to advance incoming shift., • Prepare job assignments, revise manpower where needed, accounting for priorities based on directions from meeting., • Review emails, holds and pertinent actions requiring attention., • Conduct crew meeting, reviewing production details from the previous day, shift and give Safety toolbox topic., • Review CIP needs for all lines., • Review available product against production needs. Hourly Rounds: • Verify that product labels, codes, and weights are all correct., • Verify Filler SOP’s are being adhered to., • Ensure that run time information is accurate., • Utilize all available personnel to relieve breaks/lunch. End of Shift: • Review production needs for incoming shift with Production Supervisor and Processing Supervisor., • Check shift crewing, accounting for Tardy/Absence (Call offs)., • Cover overtime as needed., • Review with staff the most current line details and plans for the following shifts, • Complete and send out shift report., • Turn in paperwork for OEE accounting. Pay: $75-$85K/a year* • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionDescriptionFood Service Director Full-Time Positions Available. Apply Today! Nursing Home, Senior Living, Hospital, or Healthcare Required! We will provide sanitation certification if you are not already Serve Safe Certified. We are seeking an experienced Food Service Director for our Skilled Long-Term Care Facility in Buffalo, NY to oversee our dining operations and ensure exceptional food service delivery. The ideal candidate will have a strong background in food service healthcare management. Food Service Director Key Duties • Schedule and assign staff, prepare, and process department payroll and new hire paperwork., • Ensure the food service operates within established budgetary guidelines., • Ordering and purchasing., • Knowledge of local, State, Federal regulations, and survey inspection process., • Train, supervise, and evaluate dietary staff, ensuring adherence to food safety and sanitation standards, as well as regulatory compliance., • Oversee the overall sanitation and cleaning of the kitchen, storage and dining areas, and equipment., • Performs other job-related duties. Food Service Director Qualifications • Current ServSafe certification or we will provide upon hire., • Certified Food Manager preferred. Certified Dietary Manager (CDM) certification a plus., • Minimum 2-3 years managing the food service department in long term care facility, hospital, or healthcare setting strongly preferred., • Strong knowledge of large scale and therapeutic food preparation., • Solid leadership and supervisory skills., • Proficiency in basic computer skills, Outlook Email, Microsoft Office, Meal Tracker, OnCare, and Meal Tracker. Food Service Director Benefits • Health, Dental and Vision Insurance, • Population Health 125 - Your Wellness Guardian, • Paid Time Off and Paid Holidays, • Uniform Shirts Provided, • Direct Deposit, • 401K, • Education Reimbursement - $250 Annually, • Paid Orientation and Training, • Opportunities for career advancement

Job Description Responsibilities How you'll change lives As a Dietitian at U.S. Renal Care, you will be an integral part of an interdisciplinary team, providing excellent care for patients living with kidney disease. U.S. Renal care dietitians work under the supervision of a RDN Regional Manager. What you'll be doing Patient Nutrition. Using the most current, science-based practices, you will recommend therapeutic diets based on patient nutritional needs, preferences, and changes in treatment, in consultation with the patient's physician. You will review lab results and provide appropriate education for nutritional interventions on such topics as fluid and sodium, potassium, and CKD-Mineral and Bone Disorder management. You will also conduct patient assessments and care planning activities, as well as participating in monthly interdisciplinary patient care conferences. Teamwork. You will collaborate with the Medical Director, physician/advanced practice provider, facility administrator, social worker, nurse, and patient care technician to maintain positive relationships with area hospitals, skilled nursing facilities, agencies, vendors, and the community. Safety & Quality. You will help with clinical and operational processes, with a focus on improving patient health and achieving target goals for patient outcomes. You will also help maintain a productive quality assurance program and participate in monthly Quality Assessment and Performance Improvement (QAPI) activities. Qualifications What we're looking for • Current Registered Dietitian (RD/RDN) certification showing proof of registration with Commission on Dietetic Registration (includes Baccalaureate or Advanced degree)., • Minimum of one-year experience in clinical nutrition as a Registered Dietitian., • Current Dietitian (LD/LDN) license in applicable state is required unless employed in the state of AZ, CA, CO, HI, IN, MI, NJ or VA. State certification (Certified Dietitian/Nutritionist) required in CT and NY. License must be maintained as current and in good standing., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must have basic computer skills, including Microsoft Office (Word, Excel, Outlook); proficiency in all company clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state. Are you ready to make a difference? We're here to change the lives of people with kidney disease and shape the future of kidney care. We still have much work ahead. If you desire to make a positive impact in the life of others and pursue a fulfilling career in healthcare, we invite you to join our team at U.S. Renal Care! Are you with US? Apply today! Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO

Job Description Responsibilities How you'll change lives As a Dietitian at U.S. Renal Care, you will be an integral part of an interdisciplinary team, providing excellent care for patients living with kidney disease. U.S. Renal care dietitians work under the supervision of a RDN Regional Manager. What you'll be doing Patient Nutrition. Using the most current, science-based practices, you will recommend therapeutic diets based on patient nutritional needs, preferences, and changes in treatment, in consultation with the patient's physician. You will review lab results and provide appropriate education for nutritional interventions on such topics as fluid and sodium, potassium, and CKD-Mineral and Bone Disorder management. You will also conduct patient assessments and care planning activities, as well as participating in monthly interdisciplinary patient care conferences. Teamwork. You will collaborate with the Medical Director, physician/advanced practice provider, facility administrator, social worker, nurse, and patient care technician to maintain positive relationships with area hospitals, skilled nursing facilities, agencies, vendors, and the community. Safety & Quality. You will help with clinical and operational processes, with a focus on improving patient health and achieving target goals for patient outcomes. You will also help maintain a productive quality assurance program and participate in monthly Quality Assessment and Performance Improvement (QAPI) activities. Qualifications What we're looking for • Current Registered Dietitian (RD/RDN) certification showing proof of registration with Commission on Dietetic Registration (includes Baccalaureate or Advanced degree)., • Minimum of one-year experience in clinical nutrition as a Registered Dietitian., • Current Dietitian (LD/LDN) license in applicable state is required unless employed in the state of AZ, CA, CO, HI, IN, MI, NJ or VA. State certification (Certified Dietitian/Nutritionist) required in CT and NY. License must be maintained as current and in good standing., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must have basic computer skills, including Microsoft Office (Word, Excel, Outlook); proficiency in all company clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state. Are you ready to make a difference? We're here to change the lives of people with kidney disease and shape the future of kidney care. We still have much work ahead. If you desire to make a positive impact in the life of others and pursue a fulfilling career in healthcare, we invite you to join our team at U.S. Renal Care! Are you with US? Apply today! Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO

Job Description Job Summary: The Controls Technician ensures the reliability and efficiency of production processes by installing, maintaining, troubleshooting, and repairing electrical and automation systems. This role also involves minor design, programming, and maintenance of PLC systems, including Allen Bradley. The position includes diagnosing equipment issues, making necessary repairs, and upholding high technical standards, safety, and quality. Must have holiday and weekend availability. Must also be available to work all shifts (1st,2nd,3rd). Key Responsibilities: • Perform routine inspections, preventive maintenance, and repairs on electrical and control systems to minimize downtime and ensure optimal performance., • Develop, modify, and troubleshoot Programmable Logic Controller (PLC) programs to control production equipment and processes., • Create and update Human-Machine Interface (HMI) screens for operator interaction and process monitoring., • Calibrate and maintain sensors, transmitters, and other instrumentation devices used in production processes., • Install, troubleshoot, and repair electrical wiring, circuits, and components in accordance with safety standards., • Collaborate with engineers and production teams to identify opportunities for process improvement and automation., • Maintain accurate records of maintenance activities, equipment manuals, and electrical drawings., • Ensure that all work is performed in compliance with relevant safety, environmental, and regulatory standards., • Provide training and guidance to production personnel on the safe operation and basic troubleshooting of control systems., • Installs, troubleshoots, repairs the following systems: PLC’s, HMI’s, VFD Drives, Vision Systems, Motor Control Centers, Power Distribution Centers, Motors (DC, AC, Stepper, Servo, etc.), Three Phase/Single Phase - power and control circuits, Control Panel layout and component installation., • First responder to troubleshooting activities, leading, and assigning crew members and utilizing all available resources to correct controls issues and/or equipment/system breakdowns in an expedient manner., • Works with Maintenance Mechanics on shift to trouble shoot root cause of problems and puts preventative controls in place to mitigate further issue., • Collaborate with all business partners to maintain an ongoing, uninterrupted operation to produce high quality products, while maintaining the department in an acceptable manner., • Proactively evaluate obsolete equipment within the plant making recommendations for repair and/or replacement., • Other duties as assigned. Experience & Education Required: • Associates degree with 3-5 years of experience or equivalent combination of education and experience., • Technical degree or certification in electrical or controls-related field preferred., • Proficiency in PLC programming (e.g., Allen-Bradley, Siemens) and HMI development., • Strong knowledge of electrical systems, industrial controls, and instrumentation., • Familiarity with food safety regulations (e.g., HACCP, GMP) is a plus., • Excellent problem-solving and troubleshooting skills., • Commitment to safety and adherence to safety protocols., • Flexibility to work off-hours and weekends when necessary for maintenance and emergencies. Knowledge & Skills - Required • Proficient in troubleshooting PLC-based control systems; preferably Rockwell Software., • Competence in digital and analog temperature, pressure, flow, speed, and weight measurement., • Familiarity with discrete sensors., • Skilled in process loop calibration and equipment., • Proficient in configuring industrial control networks like Ethernet, Device Net, and DH+., • Experienced in working with 480V 3-phase power distribution., • Capable of working with Allen Bradley motor controls and VFDs., • Proficient in using electrical test equipment., • Prior manufacturing experience with PLCs and automation controls., • Possesses a working knowledge of electrical schematics, power distribution and controls, motor and motor controls, PLC logic controls, HMIs, and other industrial controls., • Must be a minimum of 18 years of age. Preferred • Dairy and/or food processing expertise, particularly in Mixing & Blending, Retort operations, automatic packaging, system and equipment mechanics, and sanitation and safety., • Proficiency in setting IP addresses using BOOTP and familiarity with software programs such as RSLogix 5, RSLogix 500, RSLogix 5000, Factory Talk for programming PLCs, HMIs, and Drive. Experience with WonderWare is a bonus. Confidentiality • The Controls Technician is exposed to and entrusted confidential information relative to production methods, customers and company strategy. Management Responsibility • The Controls Technician is an individual contributor role that operates under the general direction of the Maintenance Manager. Work Environment • While performing the duties of this job, the employee frequently works near moving mechanical parts, high speed and processing equipment; is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals; is frequently exposed to moderate to high noise levels in the work environment., • Must be able to see, grasp hold, walk, climb, bend, and stretch, lift up to 40 lbs., • Will spend significant time in the production environment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $30-$45/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.