Installation technician jobs in Bakersfield, CaliforniaCreate job alerts

Job Description Division: 142 - LAX-SVC Position: Overhead Crane Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $37.00-$50.00 an hour Job Summary A field service technician will provide quality installation, inspections, maintenance and repair service for hoist and crane equipment. A field service technician will also uphold the highest level of professional integrity and ethics as required to instill customer confidence and continued success in service. Essential Duties · Troubleshoot, repair and inspect overhead cranes and hoists, below the hook devices and other lifting devices. · Perform scheduled preventive maintenance activities on equipment. · Support customers by effectively interfacing with customer and office in repairing equipment as needed. · Evaluate and make recommendations regarding required repairs for customers. · Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements. · Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to emergency service/breakdown calls. · Document service and installation actions by completing forms, reports, and inspection checklist. · Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner. · Maintain professional presentation, timeliness, appearance, and organization in all areas. Key Performance Indicators (KPIs) Indicators of success and satisfactory job performance will include but may not be limited to: · TBD Other subjective factors considered in assessing job performance include the ability to balance applied expertise and knowledge with “soft skills” such as interpersonal skills, communication ability, aptitude for learning and adaptation, computer skills, abstract and conceptual thinking, and accurate planning and prediction of operational activities. Required Skills and Knowledge · Ability to work under pressure and deadlines · Ability to work independently. · Ability to work well with others. · Ability to fabricate and weld structures (structural welding only if certified). · Ability to perform inspections to OSHA/ANSI criteria · Ability to troubleshoot electrical circuits, single or three phase and AC or DC. · Ability to assemble and repair complex machinery. · Excellent communication skills. · Ability to work at heights. · Willingness to travel. · Safety oriented. · Maintain confidentiality. · Quality and results driven. · Good driving record. · Ability to drive a service truck with a trailer. · Ability to drive in in-climate weather including but not limited to rain, sleet, snow, high wind, and icy conditions. · Ability to drive at night. · Ability to use hand tools, power tools...etc. · Ability to lay out column spacing for new installs. Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment and Equipment Used This job operates in a field environment. Equipment used includes hand tools; power tools; lift equipment; material handling equipment, ear plugs, steel-toed shoes, gloves; safety glasses, lanyard and body harness. · 50% Indoor 50% Outdoor. Good ventilation, noise Occasional to Continuous Physical Demands Occasional=1-33% Frequent=34-66% Continuous=67-100% (According to the Dictionary of Occupational Titles) Non-material handling: · Bending: Frequent. Various bending and low-level positions are performed while working. · Squatting: Frequent. Various positions required. · Kneeling: Frequent. Various positions required. · Balance: Continuous. · Overhead reach: Frequent. Performed while working on equipment. · Ladder: Frequent. Used when working on equipment. · Personnel Lifting Equipment: Frequent. Used when working on equipment. · Hand controls: Occasional. Hand controls are used for testing and operating machinery. · Tools used: Frequent. Tools commonly used include screwdrivers, pliers, wrenches, welders, and cordless drills...etc. · Sitting; Frequent. Sitting while driving to worksites. · Standing/Walking: Frequent · Fine motor coordination/manual dexterity: Frequent. · Rotation: Frequent. · Physical demand level: Moderate. Material handling: · Floor to waist: Occasional. Lifting may be performed at all levels from floor to overhead, up to 100 pounds. · Pushing/pulling: Occasional. · Physical demand level; Frequent. Position Type/Expected Hours of Work This is a full-time position. Normal days and hours of work are Monday through Friday, 7 a.m. to 4 p.m., but this is a 24/7 service position. This position regularly requires long hours (up to but not to exceed 14 hours) and weekend work. Travel Travel is primarily local during the business days, although out-of-town and overnight travel is expected. Benefits Standard benefits, including 401(k), PTO, health, dental, vision, life & disability insurance, a company vehicle to take to and from home, standard uniforms and $100 tool allowance per year. Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Under moderate supervision, installs, maintains, and repairs manufacturing equipment and fixtures. Conducts basic maintenance activities primarily on machinery and related equipment. Maintains repair and maintenance records. Troubleshoots problems and escalates non-routine and complex issues. THE OPPORTUNITY: The Sr. Electrical and Controls Technician performs troubleshooting, repair, installation, and modification of increasingly complex electrical and control systems in manufacturing, storage, laboratory, and other facility settings. WHAT WE'RE LOOKING FOR: High school diploma or equivalent required. AS/AA degree in related discipline desirable Relevant professional certifications desirable Typically possesses 2 to 5 years of relevant experience CERTIFICATIONS: Any industrial certifications will be considered EXPERIENCE: Intermediate experience (2-5 years) THOSE NECESSARY TO PERFORM THE JOB COMPETENTLY: The Sr. Electrical and Controls Technician has attained or is gaining full proficiency in specific disciplines associated with the job functions noted below. The Sr. Electrical and Controls Technician works under moderate supervision. The Technician shows potential to execute more complex tasks and contributes to projects successfully. The Technician typically requires reduced supervision to set personal objectives. Will assist with providing training to other peers. • Assists in installation of new equipment including conduit and wiring, building industrial equipment control panels, and startup testing., • Performs troubleshooting, installation, and modification of increasingly complex electrical and control systems including but not limited to, components such as mechanical relays, solid state relays, programmable logic controllers, ethernet networking switches and infrastructure, temperature controllers, thermocouples, heaters and refrigeration units, variable frequency drives, AC synchronous motors, motor starters, contactors, potentiometers, timers, circuit protection devices, and pneumatically and electrically driven valves., • Systems include low to high voltage single and multi-phase power systems (3-Phase 460VAC/208VAC, single phase 220/120VAC) and low voltage power and signal/communication systems (e.g. 24VDC, 0-10VDC, 4-20mA, millivolt signals), digital communication protocols (e.g.RS-232/RS-485 ASCII/MODBUS RTU), and Ethernet based protocols (e.g. MODBUS TCP)., • Works from increasingly complex drawings, electrical drawings, P&IDs, blueprints, manuals and verbal/written instructions on installation, repair, replacement and/or maintenance of process equipment and electrical/control systems., • Update, modify, and generate electrical drawings as needed based on repair, upgrades, or new equipment design and implementation., • Works closely with engineers, mechanics, calibration technicians, and operators in day-to-day operation, maintenance, and troubleshooting of plant equipment., • Has increasingly familiarity with operation and troubleshooting of mechanical systems to aid in the evaluation of electrical vs other causes., • Initiates purchase orders for parts, equipment, and contracted services., • Carefully approaches and analyzes situations that could directly impact personnel safety due to sensors and equipment used to control or limit machine range of motion, speed, temperature or pressure or that operate interlocks., • Schedules equipment downtime for repairs and upgrades/installations while working with the manufacturing schedule to minimize downtime. Other duties as assigned. PREFERRED QUALIFICATIONS: Increasing understanding and ability in electronics, computer and PLC programming, and CAD is highly desirable. HOW YOU WILL THRIVE AND CREATE AN IMPACT: The Sr. Electrical and Controls Technician will have gained full proficiency in two or more of the core skills to perform the above work including, but not limited to, proficiency in use of electrical measurement devices (Digital Multimeters, Oscilloscopes, Power Analyzers, Megohmmeter and associated troubleshooting devices), increasing understanding of physical electrical laws and relationships, safety requirements and procedures (e.g. NFPA 70E, LOTO, etc...), hazardous area wiring and electrical requirements, increasing awareness of wire gauge size requirements, and conduit/cable running. ENVIRONMENTAL WORKING CONDITIONS & PHYSICAL EFFORT (Under Typical Positions) Frequently exposed to moving mechanical parts, fumes, airborne particles, dust or gases. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually moderate. Required to stand and walk for a large part of the working day. Physical requirements include talking, hearing, bending/stooping, squatting, reaching above shoulder height, crouching, kneeling, balancing and pushing/pulling. Also requires some lifting/carrying/pushing or pulling up to 50 pounds with or without assistance. Use of both hands for repetitive actions such as grasping and manipulating. Specific vision abilities include close vision, peripheral vision, depth perception, and ability to adjust focus. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $52,000.00 - $83,950.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ___and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights ___. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Applied Science & Technology / HVAC Instructor, Full-time Tenure Track (BC) Kern Community College District Salary: $89,080.98 - $116,884.82 Annually Job Type: Faculty Job Number: FY25-2600219 Location: Bakersfield College -- Panorama Campus, CA Department: Below is our job description for this position. Please also review the Important Instructions & Additional Information section below, which contains valuable information about our application process. Basic Function Bakersfield College is seeking a faculty member for Applied Science & Technology (AST) / HVAC. If you are highly motivated, eager to engage a diverse student body, and passionate about teaching and learning, we highly encourage you to submit an application. Who We Are: We are a team of innovative, caring, and thoughtful faculty, staff and administrators who are passionate about contributing to the intellectual, cultural and economic vitality of our community. We embody six core values: Learning, Diversity, Integrity, Community, Wellness and Sustainability. These values frame our work as we provide opportunities for our students who come to us from diverse economic, cultural, geographical, and educational backgrounds. We offer Associate and Baccalaureate degrees and certificates, workplace skills, and preparation for transfer. Our rigorous and supportive learning environment promotes diversity, equity, and inclusion and fosters students' abilities to think critically, communicate effectively, and demonstrate competencies and skills to become productive members of our community and world. History of Bakersfield College: Bakersfield College is located in Bakersfield, California, in the heart of the Central Valley. Established in 1913, Bakersfield College is one of the nation's oldest continually operating community colleges. The college serves 33,000 students annually on the 153-acre main campus in northeast Bakersfield, at the Delano Campus (35 miles north of Bakersfield), the Weill Institute (downtown Bakersfield), and BC South-West (southwest Bakersfield). We also offer classes at several alternative locations, including Shafter Learning Center, Arvin/Lamont, McFarland, Olive Drive Training Facility, Wasco and other regional community locations. As a recognized and highly awarded Hispanic Serving Institution, Bakersfield College students are diverse and represent the communities we serve. On Diversity, Equity and Inclusion: We are sincere about building and sustaining an inclusive and equitable working and learning environment for all students, faculty, staff and administrators. We believe every member of our team enriches our diversity by exposing us to a broad range of ways to understand and engage with the world, identify challenges, and to discover, design and deliver solutions. Bakersfield College has sharpened its focus on removing institutional barriers in access, momentum, and completion. We pledge to address systemic issues of environmental microaggressions, implicit bias, and racism through intentional learning. We commit to strengthening our campus culture so that students, faculty, and staff and our partners are aware of and equipped to change policies and practices that disproportionately affect marginalized students. About the Bakersfield Community: Situated in the south San Joaquin Valley, Bakersfield has a rapidly growing economy in a location that is central to some of California's best places to visit. Fresno, Los Angeles, the mountains and several great beaches are less than two hours away, and San Francisco is less than four hours away. Known for hot, dry summers and mild winters, Bakersfield has deep roots in the energy (oil, solar and wind), agriculture, and logistics industries. Despite its growth, Bakersfield has maintained the "small town feel" that residents here love. With a relatively low cost of living, plenty of community events, and availability of housing, the City of Bakersfield is a great place to live. Representative Duties Who We Are Looking For: We are recruiting faculty with demonstrated excellence in their field who embrace the instructional values of access, sound pedagogy, creativity, and innovation. We are known for our connectedness among students, faculty, staff and our diverse local population. We are looking for applicants with a continual drive to learn and improve teaching strategies and who embrace opportunities to be involved in inventive committees, engaging campus events and other collegiate endeavors. Diversity is a core value at Bakersfield College, and we encourage applicants who demonstrate an intellectual mindfulness to contribute to diversity, equity and inclusiveness. If you are interested in modeling academic excellence for your students and colleagues, we invite you to join a team that will challenge and inspire you. About the Department: The HVAC Technology program prepares students for entry-level employment in the field of Environmental Control Technology, also known as Heating, Ventilation, Air Conditioning, and Refrigeration. Students completing these degrees/certificates offered in this program will have a foundation in troubleshooting and repair of air conditioning, heating and refrigeration systems. This program also introduces students to more complex systems typical to industrial refrigeration and ice machines. Career opportunities upon successful completion of this program include, but are not limited to: HVAC service technician, installation technician, sales representative, and industrial refrigeration operations. Minimum Qualifications Bachelor's degree(s) or higher and two years of professional experience OR - Associate degree(s) and six years of professional experience. (The professional experience required must be directly related to the faculty member's teaching assignment. Professional experience is required when the applicant possesses a master's degree.) OR - The equivalent. Certain combinations of education, experience, and other accomplishments in the field may be judged as equal to the stated minimum qualifications for these positions. Candidates who feel they possess such equivalent qualifications must request and submit an ___ ___ form. Supporting documents must be included with the completed form. AND A demonstrated sensitivity to students with diverse academic, socio-economic, cultural and ethnic backgrounds and students with disabilities Note: Degrees and credits must be from accredited institutions (Title V Section 53406). Any degree from a country other than the United States, including Canada and Great Britain, must be evaluated by an evaluation service. Note: The screening of candidates will be conducted by a screening committee. The screening committee reserves the right to limit the number of interviews granted. Meeting the minimum qualifications for a position does not assure the applicant of an interview. Knowledge & Abilities The successful applicant will be able to demonstrate that they are broadly prepared and have a depth of knowledge in the discipline. In addition, the successful applicant will be able to demonstrate the following knowledge and abilities: • Ability to work effectively and harmoniously with colleagues in an environment that promotes innovation, teaching, learning and service to diverse student population;, • Ability to effectively work with students with a wide range of skills, motivations, academic and vocational goals;, • Ability to develop curriculum, including curriculum delivered via different modalities; -Ability to participate in recruitment and articulation activities with local schools, colleges and universities;, • Ability to communicate effectively, both orally and in writing;, • Ability to maintain subject matter currency;, • Ability to assess student, program, and institutional learning outcomes; Maximum Placement Level Salary: $ 116,884.82 annually SPECIAL INSTRUCTIONSFirst Review of Applications: Complete application packets will be accepted until the position is filled; but those received by February 12, 2026, are assured consideration. The College reserves the right to extend time limits or reinitiate the recruitment/selection process at any point. Completed application packet MUST include: • Completed Online Application for Employment form, • Current resume, • Letter of interest (Cover Letter), • Statement of personal philosophy of teaching, • Copy of legible transcripts, • Copy of sample syllabi, • List of five (5) professional references - Listed on application form It is the applicant's responsibility to redact (or remove) any personal information from all documents prior to uploading. This includes Social Security Numbers, Date of Birth, and any photos of the applicant. Foreign Degree: Applicants with foreign degrees from colleges or universities outside of the United States must have their coursework evaluated by a professional association that is a member of the National Association of Credential Evaluation Services (NACES) or Academic Credentials Evaluation Institute, INC. (ACEI). A copy of the evaluation must be submitted with your on-line application. Applicants who require reasonable accommodation to participate in the selection process should contact Human Resources to make the necessary arrangements. ___ Note: The District is strongly committed to achieving staff diversity and the principles of equal employment opportunity. The District encourages a diverse pool of applicants and does not discriminate on the basis of national origin, religion, age, gender, gender identity, gender expression, race or ethnicity, color, medical condition, genetic information, ancestry, sexual orientation, marital status, physical or mental disability, pregnancy, or because he/she is perceived to have one or more of the foregoing characteristics, or based on association with a person or group with one or more of these actual or perceived characteristics or any other characteristic protected by federal, state or local law, in any of its policies, procedures or practices. ___ The District does not provide sponsorship for authorization to work in the United States. Work authorization should be established at the time of application submission Important Instructions & Additional Information Complete applications received by the "assured consideration date" above are guaranteed to be reviewed by Human Resources. If you apply after this date, there is no guarantee that your application will be reviewed. However, we still recommend that you apply because recruitments remain open and are posted until filled. The District and/or College reserves the right to extend time limits and/or repost or restart recruitments at any point. Completed applications must include the following. • Completed online application for employment, • Current resume, • Letter of interest (cover letter), • List of 5 (five) professional references (entered in online application), • Copy of legible transcripts (if required for the position) It is the applicant's responsibility to redact or remove any personally identifiable information from all documents prior to uploading. This includes Social Security Numbers, Date of Birth, photos, etc. International or Foreign Degrees Applicants with international or foreign degrees from colleges or universities outside of the United States must have their coursework evaluated by a professional association that is a member of the National Association of Credential Evaluation Services (NACES) or Academic Credentials Evaluation Institute, INC. (ACEI). A copy of the evaluation must be submitted with your online application. Accommodations Applicants who require reasonable accommodation to participate in the selection process should contact Human Resources to make the necessary arrangements. (For more information, see our ___.) Discrimination Free Work Environment Discrimination based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation of any person, military and veteran status, or the perception that a person has one or more of these characteristics is illegal and violates Kern Community College District policy. The Kern CCD Equal Employment Opportunity Plan guides the development, implementation, and monitoring of the District's efforts to foster equal employment opportunities and workplace diversity. See our ___ for more information. Work Authorization Kern Community College District does not provide sponsorship for authorization to work in the United States. Work authorization should be established at the time of application submission. E-Verify The Kern Community College District participates in the U.S. Department of Homeland Security's E-Verify program to verify the identity and employment eligibility of all newly hired employees. To learn more about E-Verify, please visit ___. Helpful Links All applicants must apply online at ___. Emails will not be accepted. jeid-e2d1bd5a0366a74183f1a7839c8b8f56

Job DescriptionSalary: $39.62/hr City Rise Utility- Traffic Control Technician: Bakersfield Hourly / Non-Exempt / Full Time Salary Range:$39.62 /hr City Rise Utility Traffic Control We service all Northern & Central California from multiple locations. At City Rise Utility Traffic Control, we provide high quality traffic control safety services for utility contractors, such as Flagging traffic through a work site, Lane Closures to divert traffic, or Detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for utility crews, our employees, and the public. BRIEF POSITION SUMMARY City Rise Utility Traffic Control employees are members of the IBEW Union. Union membership is required (enrollment facilitation available). The Traffic Control Technician works under the direction of a contractor to identify the various needs and or phases of a job. He or she is involved in providing onsite leadership of the work crew to successfully complete a job. The Technician will be tasked to assess his or her work crews performance and to provide feedback to Operations Management. The Technician specializes in the following: traffic plan review, traffic control equipment installation (various setups), flagging setups, flagger control, and jobsite supervision. A Traffic Technician has the responsibility to protect the lives of our customers, motorists, pedestrians, bicyclists, and themselves on the roadway. ESSENTIAL FUNCTIONS • Maintain a consistent and unrelenting focus on safety throughout all job functions, • Oversee work zone set up, maintenance and tear down, • Meet or exceed customer, state, federal and company expectations, • Implement traffic control setups per MUTCD standard and applicable traffic plans, • Work with management, and agencies to make adjustments to work zone requirements as needed, • Provide clear communication and direction to the customer and general public moving or traveling near or around the work zone, • Drive company trucks. Deliver equipment, • Tow and operate towable equipment, • Keep equipment well organized and in working order, • Develop superior knowledge of work zone setup and professional traffic control responsibilities, • Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones, • Complete daily Job Hazard Analysis with crew and conduct crew tailgate meetings, • Provide crew performance feedback to Operations Management. Conduct evaluations as needed, • Provide detailed safety reports on all safety incidents and or near misses, • Other duties as assigned QUALIFICATIONS • Must have valid drivers license for at least 3 years with a clean driving record, • Current IBEW membership w/Traffic Tech classification required, • Ability to read and understand traffic control plans, • Can establish and maintain effective working relationships with coworkers and others, • Can work independently with minimum supervision while prioritizing workloads to meet deadlines, • Strong interpersonal skills and professional demeanor, • Work in high-volume outdoor locations with multiple interruptions throughout the day, • Strong conflict resolution techniques, • Strong leadership skills, • Strong customer service skills, • Excellent multitasking, problem solving, and organizational skills, • Reliable Transportation with ability to commute throughout Northern California EDUCATION AND EXPERIENCE • High School Diploma or equivalent preferred, • 2+ years in an equivalent Traffic Control role, • OSHA 10 Certification, • OSHA 30 Certification, • First Aid/CPR Certification required, • Proficient knowledge of the Cal Trans MUTCD, • ATSSA Flagger Certification required, • TCT certification by ATSSA preferred, • TCS certification by ATSSA preferred PHYSICAL DEMANDS • Frequent lifting of heavy objects, up to 50 lbs, • Lift, carry, push, pull and assemble traffic control materials in the proper order to manage work zone traffic, • Stand for long periods of time in various weather conditions, and different times of day/night, • Various noise decibel levels, • Stooping for prolonged periods of time, • Dexterity in the use of hand and fingers, • Reaching, sitting, bending, pushing, pulling, talking, hearing and Vision (up close, at a distance, along the periphery) Language Skills: • English- read and write fluently Work Environment: While performing the duties of this job, the employee is regularly exposed to moving vehicles and pedestrian traffic and outside weather conditions. The employee is frequently exposed to high, precarious places and loud noises. The employee is occasionally exposed to wet and/or humid conditions, high temperatures. The noise level in the work environment is high. Equal Employment Opportunity and Non-Discrimination: City Rise Utility Traffic Control adheres to providing Equal Employment opportunity and Affirmative Action. City Rise Traffic does not discriminate on the basis of race, color, creed, religion, national or ethnic origin, sex, gender, age, sexual orientation, marital status, pregnancy, disability, medical condition, or veteran status. Employment is contingent upon new employees verifying legal permission to work in the United States, successfully passing criminal and drug test.

Job Description Job Title: Network Support Technician Location: Bakersfield, CA Interview Mode- Video Call Duration- 6+ Months (Could be extended) Job Description: The ideal candidate will troubleshoot, maintain, and optimize network connectivity and hardware for reliable communication and performance. Key Responsibilities: • Install, configure, and support wireless devices and communication equipment., • Troubleshoot and maintain walkie-talkies, wireless cameras, and other networked devices., • Assist with fiber optic installation, testing, and maintenance., • Monitor network performance and resolve connectivity issues., • Adhere to Company change management procedures and practices., • Monitor and respond to emergency conditions effecting operations to the extent that services can be safely provided (e.g., hurricanes, earthquakes, etc.)., • Adhere to Company’s Business Continuity Plans and Disaster Recovery Plans., • Provide smarthands support for other telecommunications infrastructure, including, but not limited to:, • Fiber optic and copper cable installation, maintenance, troubleshooting and repair (working with cabling contractor as required)., • WiFi and BLE systems.

Job DescriptionCommercial food service equipment repair agency looking for field service technicians to provide service across the greater Bakersfield & Fresno regions. Servicing and installation on foodservice, frozen beverage, coffee and soda fountain equipment will be the majority of the services offered in this region. Multiple years of experience in soda fountain, coffee, general food service equipment, refrigeration or electrical is preferred. Employee will take work vehicle home and be dispatched direct to job site from home base. We will provide company vehicle, gas card and paid training for all products you will provide service on. Work shift is Monday through Friday 7 AM - 4 PM (hours fluctuate at times based on customers' needs) working in the field servicing restaurants, convenience stores, offices, hotels and coffee shops. Opportunity for regular overtime pay and weekend participation is available. Field Service Technician Requirements and Qualifications • Prior experience performing repairs on mechanical equipment, preferably in a similar environment, • Thorough knowledge of our hardware and machinery, • Experience using common hand and power tools, • Experience with diagnostic tools and software, • Excellent written and verbal communication skills, • Track maintenance and repairs in our company databasePay is based on experience and full arsenal of health and retirement benefits will be made available to you within your first 90 days of employment. Please inquire today!

Job Description Select Business Systems of Bakersfield, a Sharp Authorized Dealer located in Bakersfield, CA, is a leading provider in Smart Office technology for over 25 years. We specialize in delivering excellent customer service every time and we do this by hiring and training great people. As a locally owned and operated business in Kern County, we are committed to providing top-notch services and technology to our customers. Working as a Service Technician you can expect: · Full time schedule, working 40 hours a week · Opportunity for training, development, and promotion · Regular business hours. We value work/life balance. · Competitive Vacation, Sick Pay and Paid Holidays If you are career-minded and ready to be an integral part of a team in a dynamic, innovative and upbeat atmosphere, then you belong right here on our award-winning team. What’s the opportunity: Service Technicians must be mechanically inclined, extremely reliable and trustworthy. They should be comfortable working independently and have excellent communication skills. In this role, Service Technicians perform diagnostics, service repairs and maintenance work on customer and dealer-owned copier equipment. Our technicians provide top notch customer care to all of customers and clients primarily in the counties of Kern, Inyo, and Mono, but will occasionally travel outside of these areas. What will you do: · Provide service and customer support during field visits or dispatches. · Manage all on site installation, repair, maintenance and test tasks. · Diagnose errors or technical problems and determine proper solutions. · Follow all company procedures and protocols. · Cooperate with technical team and share information across the organization. · Comprehend customer requirements and make appropriate recommendations/briefings. · Update job knowledge by participating in educational opportunities; reading professional publications. · Build positive relationships with customers. · Works as part of a cohesive team within the shop to meet customer needs. · Follows all safety practices of the organization when completing work assignments. · Helps to maintain company vehicles, inventory and tools in proper working condition. · Maintain knowledge on existing products and pursue additional technical and product knowledge by actively participating in the training programs of the dealership. · Maintains communication with the customer and answers questions relative to the work being performed. Make recommendations for additional work that needs to be completed. Qualifications: · High School Diploma or equivalent · Must possess a valid driver’s license · Must possess strong communication skills and mechanical aptitude · Must successfully complete Sharp equipment pre-testing and training · Requires frequent kneeling, bending, and considerable use of hands and tools · Requires moving or lifting over 50 pounds Company DescriptionWe are a leading provider in Smart Office Technology specialize in delivering excellent customer service every time and we do this by hiring and training great people.We are a leading provider in Smart Office Technology specialize in delivering excellent customer service every time and we do this by hiring and training great people.

Site Maintenance & Operations Specialist (Ridgecrest) Kern Community College District Salary: $4,781.57 - $6,756.23 Monthly Job Type: Classified Job Number: FY25-2600323 Location: Ridgecrest, CA Department: Maintenance & Operations Below is our job description for this position. Please also review the Important Instructions & Additional Information section below, which contains valuable information about our application process. Basic Function Under the direction of an assigned supervisor, perform a wide variety of skilled and semi-skilled duties related to the operations of small campus site facilities including carpentry, plumbing, painting, electrical and general building maintenance; operate and monitor the energy management system at the small campus site; perform a variety of general grounds maintenance duties. Positions in this classification demonstrate and apply a broad skill set related to the maintenance and operations of buildings and grounds; work with greater independence than positions in the Maintenance Worker classification; and refer more complex problems to more highly skilled workers. Representative Duties Perform maintenance to campus site facilities, furnishings, and equipment including replacement and repairs to plumbing and fixtures; replacement of air conditioning and heating filters and belts, and minor repairs to desks, tables, chairs, cabinets, shelves, windows and doors. Repair carpeting, light fixtures, tiles, fan motors, drapes, window screens, sinks and toilets; install venetian blinds, drapes and shades. Perform minor maintenance related to electrical components including troubleshooting and repair of outlets and batteries. Schedule the usage of College air conditioning, heating and lighting systems. Using the College Energy Management System (EMS); troubleshoot, repair, and coordinate with Plant Engineer for additional support as needed systems; coordinate maintenance and repair of College EMS facilities with campus Plant Engineer. Open and secure classrooms and buildings, including programming of automatic door locks; set and disengage alarm system; move and arrange furniture and equipment and prepare rooms; replace lights and ballasts; adjust shades and blinds. Perform a variety of duties in the maintenance and repair of the irrigation system; change and adjust sprinkler heads; maintain controllers and assist in irrigation system installation and maintenance projects. Plant, water and maintain landscaped areas; water, mow, weed, trim and fertilize lawns; trim and prune bushes, trees and shrubs; stake trees. Rake leaves and clear debris and snow from doorways, walkways, parking lots and other related facilities; apply herbicides, fungicides and pesticides. Operate and maintain power tools including mowers, edgers and blowers; maintain hand tools and assigned equipment; perform small engine maintenance and repair to lawn equipment. Clean shop vehicle; monitor fuel, oil and water usage; log maintenance record; arrange for servicing as required with campus automotive technician. Work with faculty, staff, students and the public in coordinating preparations for special college events; coordinate large set-ups and moving of furniture and equipment. Clean and sanitize restroom facilities and fixtures; replenish supplies in restrooms and related facilities. Pickup and deliver supplies, materials and mail from main campus; purchase supplies as needed. Operate a magnetic card system. Operate work order request computer program to log work orders, notify staff of work scheduled, and notify staff of completion. Install partitions, walls to increase or decrease the size of rooms. Construct and install forms; pour and finish cement for forms and walks; inspect and repair roof leaks. Repair other equipment involving the application of plumbing, electrical, locksmithing and a variety of the trades. Repair exterior and interior door locks; repair desk and file locks; strip, sand, varnish and refinish. Mount projector screens, chalk/white boards, pictures and tack boards. Construct and paint signs; install and remove signs. Paint curbs and parking stripes and numbers. Perform related duties as assigned. Minimum Qualifications Any combination equivalent to: Graduation from high school supplemented by formal training in one of the skilled crafts and two years of journey-level skilled crafts working and maintenance experience. LICENSES AND OTHER REQUIREMENTS: Possession of, or ability to obtain, a valid California driver's license. Satisfactory completion of pre-employment physical assessment. Satisfactory completion of pre-employment drug testing. Knowledge & Abilities KNOWLEDGE OF: Methods, practices, equipment and tools used in building construction, including carpentry, plumbing, painting, electrical work, facilities management, locksmith, and concrete construction. Methods, practices, equipment and tools used in general grounds maintenance. Operation of energy management systems. Record keeping techniques. Basic math. Safe work practices. Computer software systems. ABILITY TO: Perform a full range of assigned skilled maintenance work including carpentry, plumbing, painting, light construction and electrical work. Perform general grounds maintenance duties. Use and care for tools and equipment used in performing assigned duties. Understand and follow oral and written instructions. Operate software programs relative to the Energy Management System (EMS) and other software programs utilized in facilities management. Read and interpret blueprints, schematics, sketches and drawings. Maintain a variety of work records. Communicate effectively both orally and in writing. Establish and maintain cooperative and effective working relationships with others. SALARY RANGE$4,781.57 - $6,756.23 monthlyMaximum Starting Salary: $5,023.64 monthly SPECIAL INSTRUCTIONSFirst Review of Applications: Complete application packets will be accepted until the position is filled; but those received by April 9, 2026 at 11:59pm, are assured consideration. The College reserves the right to extend time limits or reinitiate the recruitment/selection process at any point. Completed application packet MUST include: • Completed Online Application for Employment form, • Current resume, • Letter of interest (Cover Letter), • Copy of legible transcripts, • List of five (5) professional references - Listed on application formIt is the applicant's responsibility to redact (or remove) any personal information from all documents prior to uploading. This includes Social Security Numbers, Date of Birth, and any photos of the applicant. Foreign Degree: Applicants with foreign degrees from colleges or universities outside of the United States must have their coursework evaluated by a professional association that is a member of the National Association of Credential Evaluation Services (NACES) or Academic Credentials Evaluation Institute, INC. (ACEI). A copy of the evaluation must be submitted with your on-line application. Applicants who require reasonable accommodation to participate in the selection process should contact Human Resources to make the necessary arrangements. ___ Note: The District is strongly committed to achieving staff diversity and the principles of equal employment opportunity. The District encourages a diverse pool of applicants and does not discriminate on the basis of national origin, religion, age, gender, gender identity, gender expression, race or ethnicity, color, medical condition, genetic information, ancestry, sexual orientation, marital status, physical or mental disability, pregnancy, or because he/she is perceived to have one or more of the foregoing characteristics, or based on association with a person or group with one or more of these actual or perceived characteristics or any other characteristic protected by federal, state or local law, in any of its policies, procedures or practices. ___ The District does not provide sponsorship for authorization to work in the United States. Work authorization should be established at the time of application submission. Important Instructions & Additional Information Complete applications received by the "assured consideration date" above are guaranteed to be reviewed by Human Resources. If you apply after this date, there is no guarantee that your application will be reviewed. However, we still recommend that you apply because recruitments remain open and are posted until filled. The District and/or College reserves the right to extend time limits and/or repost or restart recruitments at any point. Completed applications must include the following. • Completed online application for employment, • Current resume, • Letter of interest (cover letter), • List of 5 (five) professional references (entered in online application), • Copy of legible transcripts (if required for the position) It is the applicant's responsibility to redact or remove any personally identifiable information from all documents prior to uploading. This includes Social Security Numbers, Date of Birth, photos, etc. International or Foreign Degrees Applicants with international or foreign degrees from colleges or universities outside of the United States must have their coursework evaluated by a professional association that is a member of the National Association of Credential Evaluation Services (NACES) or Academic Credentials Evaluation Institute, INC. (ACEI). A copy of the evaluation must be submitted with your online application. Accommodations Applicants who require reasonable accommodation to participate in the selection process should contact Human Resources to make the necessary arrangements. (For more information, see our ___.) Discrimination Free Work Environment Discrimination based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation of any person, military and veteran status, or the perception that a person has one or more of these characteristics is illegal and violates Kern Community College District policy. The Kern CCD Equal Employment Opportunity Plan guides the development, implementation, and monitoring of the District's efforts to foster equal employment opportunities and workplace diversity. See our ___ for more information. Work Authorization Kern Community College District does not provide sponsorship for authorization to work in the United States. Work authorization should be established at the time of application submission. E-Verify The Kern Community College District participates in the U.S. Department of Homeland Security's E-Verify program to verify the identity and employment eligibility of all newly hired employees. To learn more about E-Verify, please visit ___. Helpful Links All applicants must apply online at ___. Emails will not be accepted. jeid-ab2cd565c0d3d64da1b51f8f80f1d12a

Job Description DESCRIPTION The SSD Technician is responsible for the installation, adjustment and maintenance of all types of detention related equipment. RESPONSIBILITIES • Install and maintain equipment including, but not limited to, cylindrical, mortise, and rim locks, motor and manually driven detention equipment, detention locks, slider service and maintenance, • Install and maintain frames, doors, hardware, locks, sliders, furniture and door closers, • Install wire mesh, security ceilings and wall panels, • Install glazing and caulking, • Plan, install, service and test mechanical and electronic locking systems, • Make emergency repairs to detention and security locking systems, • Layout detention equipment for proper locations from construction documents and shop drawings, • Handle and distribute construction materials including doors, frames, glass, hardware, steel furniture and steel assemblies, • Troubleshooting hardware and Mechanical problems associated with Detention, • Be available for on call assignments, • All other related duties as assigned or required by Service Manager and/or Coordinator, • Open, repair and change the combination of all types of locking devices and makes keys for same, • Repair and maintain all types of doors, door closers, exit devices, panic hardware and related hardware, • Operate manual key coding/cutting machine, • Log keys that are issued and returned, • Assist with building maintenance tasks, such as plumbing, electrical or other essential building functions, • Lift up to 50lbs, • Communicate regularly and effectively as appropriate, • Maintain the standards, culture and values of CML Security, • High school diploma or GED required, • 3 Years of related experience preferred, • Welding experience preferred, • Alarm tech- intrusion systems preferred, • CCTV technician preferred, • Door access control preferred, • 2nd shift Monday- Friday 7:00pm-3:30am, • 3rd shift Saturday- Wednesday 7:00am-3:30pm, • 4th shift Saturday-Wednesday 7:00pm-3:00am Pay: $25-$50 an hour Expected fill date: December 2025 Travel required : 70% In-state 30% Out-of state Employment may be contingent upon successful completion of a background check and drug screen Company DescriptionOur team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project. Total Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership. CML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.Our team works alongside General Contractors and Architects to provide the best solutions for construction and design of detention facilities, often helping owners narrow down particular solutions needed for their individual project.\r\n\r\nTotal Rewards include wages, eligibility for the company’s bonus program, medical insurance benefits, as well as more unique programs, including a 401k match, fitness reimbursement, tuition reimbursement, cell phone provider discount, employee referral bonus, employee assistance program, Elevations Credit Union membership, CML apparel reimbursement and access to CML’s Top Golf platinum membership.\r\n\r\nCML is an Equal Opportunity Employer We promote a safe workplace and provide regulatory compliance training as well as CML offers safety credential advancement.

Job DescriptionDescription: We believe in rewarding great talent from day one—kick off your career with a $500 sign-on bonus if you’re new to the garage door trade, or $1,000 if you already have professional garage door experience! Schedule: 4 days a week, 10 days a day (Friday-Monday) Why join us? Our Vision – To provide outstanding garage door repair service, complete customer satisfaction and a program that rewards excellence from our franchisees, technicians, and staff. Our Mission – To establish Precision Door Service as the public standard and national household name in garage door repair service. Our Values – Culture, Reliable People, Career Oriented, Industry Standard Training and Safety, Competitive Salaries & Benefits, Garage Door Leaders The Garage Door Technician serves as the sales and service technician for garage doors, garage door openers, and related components. The technician provides multiple alternative recommendations for repair and replacement of necessary parts for garage doors. He or she will sell appropriate services or replacement options. The technician will interact with customers daily providing them with excellent customer service. Most residential service work is done on existing garage doors and opener systems. Work assignments are received from the call center or Customer Experience Specialist (CXS.) Any problems, questions, or issues will be referred to the Branch Manager for clarification or resolution. The Garage Door Technician is the first line of support for customers and is expected to maintain a neat and clean appearance and to treat all customers with decency and respect. Key Responsibilities: • Repair garage door service upon request., • Provide estimates for remodel and repair bid requests., • Attending and participating in all required safety meetings and training sessions., • Learning the basics of track alignment, track adjustment, adequate back hangs, operator arm, photo eye setting, and other door and operator repairs., • Learning basic door and operator maintenance skills and reviewing new products when appropriate., • Retaining an appropriate level of product knowledge for products offered., • Ensure all scheduled work is performed to the customer’s satisfaction and resolve issues or problems., • Reviewing Work Order/Invoice information for accuracy and completeness before departing the job., • Collection of payment for services rendered at time of job completion., • Promote Precision Door Service products and services wherever possible., • Ensure truck is fueled, serviced, and ready for operation prior to beginning of workday., • Ensure truck is restocked with appropriate service material daily., • Assisting in unloading of trucks when needed., • Maintain timecards for compensation through the company’s payroll software for accurate record keeping of time worked., • Perform a variety of secondary support tasks as requested by the Branch Manager Requirements: • Knowledge of materials, methods, and tools involved in the installation of garage doors, openers, and related components., • Knowledge of principles and methods for showing, promoting, and selling products or services to include marketing strategy and tactics, product demonstration, sales techniques, and sales control systems., • Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Ability to take accurate measurements and estimate the materials needed., • Ability to provide excellent customer service by assessing customer needs, meeting quality standards for services, and evaluating customer satisfaction., • Ability to identify mechanical problems and review related information to develop and evaluate options and implement solutions., • Ability to identify specific brands of doors, openers, keyless entry systems, and related components., • Ability to close sales deals., • Ability to establish and maintain effective and cooperative working relationships with those contacted in the course of the work., • Ability to follow complex instructions and communicate effectively orally and in writing., • Ability to organize work for timely completion., • High school diploma or GED; supplemented by garage door experience, preferably in sales, installations, and repairs., • Proven sales experience closing deals directly with customers, preferably in the garage door industry., • Able to work a flexible schedule including weekends, holidays, and evenings to accommodate phone calls from customers., • Must be able to sit for extended periods of time (driving and travel time.), • Must possess a current valid driver’s license. Core Competencies • Customer-focused and Customer Service Orientation – Works with clients and customers to assess their needs, provides information or assistance, resolves their problems or satisfies their expectations; knows about available products and services; is committed to providing quality products and services; honors all of the franchise’s commitments to customers by providing helpful, courteous, accessible, responsive, and knowledgeable customer service., • Effective Communications – Practices meaningful two-way communication by speaking clearly, paying close attention and seeking to understand others, listening attentively and clarifying information attending to nonverbal cues, and responding appropriately; influences and ensures support for proposed ideas., • Service Focus and Teamwork – Values and delivers high quality, professional, responsive, and innovative service while cooperating with others to accomplish common goals; works with others within and across the company to achieve shared goals; treats others with dignity and respect and maintains a friendly demeanor; values the contributions of others., • Interpersonal Skills – Shows understanding, friendliness, courtesy, tact, empathy, concern, and politeness to others; develops and maintains effective relationships with others; may include effectively dealing with individuals who are difficult, hostile, or distressed; relates well to people from varied backgrounds and different situations; is sensitive to cultural diversity, race, gender, disabilities, and other individual differences., • Job Mastery and Continuous Learning – Takes steps to develop and maintain knowledge, skills, and expertise necessary to achieve positive results; participates fully in relevant training programs and actively pursues other opportunities to develop knowledge and skills., • Sales Skills - Excels in prospecting and lead generation, identifying opportunities and leveraging outreach strategies to engage potential customers; a consultative selling approach to align solutions with customer needs, while negotiation and closing skills help secure deals and foster long-term partnerships. Working conditions • Tasks are regularly performed inside and/or outside with potential for exposure to adverse conditions, such as dirt, dust, pollen, odors, fumes and/or poor ventilation, wetness, humidity, rain, temperature, and noise extremes, machinery and/or moving vehicles, vibrations, electric currents, animals/wildlife, toxic/poisonous agents, gases or chemicals, oils and other cutting fluids, violence and/or disease, or pathogenic substances. Physical requirements Depending on the functional area of the assignment, tasks involve the ability to medium to heavy work. As a technician, you must be able to lift up to 100 lbs. and carry up to 50ft. Physical efforts usually involve lifting, *This is a commission-based role with an average earning potential of $80,000–$140,000 per year. Actual earnings are based on individual performance and a variable commission rate of 15%-17% on net sales. Paid training is provided during the first 12 weeks to ensure your success at a pay range of $20.00 to $23.00. Training pay offered may vary depending on geographic region, internal equity, job-related knowledge, skills & experience, among other factors. At Precision, we invest in our team with comprehensive benefits, including medical, vision, and dental coverage, plus a 401(k) for eligible positions. Our company's pay period is Sunday through Saturday, with WEEKLY payroll! That means payday is EVERY Friday!

Job Description Responsibilities The Mobile Diesel Mechanic is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Mechanical aptitude and technical ability is a must. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Bosch Building Technologies – Senior Technician -Security About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The Senior Technician - Security; will provide efficient and high-quality installations related to integrated security systems. This position will require a high level of project involvement, including the physical installation, testing and closing-out process. Responsibilities: • Serve as the subject matter expert and mentor to assigned team of technicians, • Install, test, troubleshoot, repair, and maintain all Security systems at customer sites, • Installation will include, but not limited to: Video NVR/Servers, IP Cameras, Access Control Devices, Intrusion Devices, Head End Panel Installations, Intercoms, Wireless Devices, Switch Gear., • Perform assigned projects within scope, in a timely manner, and on budget, • Provide customers with system operation and training, • Excellent attention to detail including maintaining concise daily records and following of operational standards and practices, • Adhere to all applicable safety rules and regulations, • Review materials options and verify count accuracy, • Maintain a clean and orderly jobsite, • Facilitate the delivery of staged materials to the jobsite, • Coordinate with Project Management and Field Technicians for project scheduling, • Support, lead, and mentor team members, • Design systems and layout, • Maintain a high level of safety and professionalism, • Lead projects at a site level, manage a team of junior technicians as necessary, • Work at required heights utilizing ladders, scaffolding, lifts, or other. In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Required Qualifications: • 10+ years of work experience as a Senior / Lead Technician with a security integrator (including current manufacturer certifications), • Industry experience working with access control, video surveillance, and intrusion, • Valid US drivers license with acceptable record, • Industry Experience: Healthcare, Education, Manufacturing, Utilities, Financial & Hospitality., • Video Surveillance: Avigilon, Genetec, Milestone, Bosch, Axis, Hanwha, Exacq., • Access Control: Lenel, Software House, Avigilon, Genetec, Identiv, Honeywell, Open Path, RS2, S2, AMAG, Gallagher, Open Options., • Intrusion: DMP, DSC, Honeywell, Bosch., • Locking Hardware: Maglocks, Strikes, Mortise, Cylindrical, ADA applications., • Data Terminations., • Field engineering or estimating skills., • Updating blueprints on Bluebeam., • Experience with Procore, Fieldwire, Smartsheets, etc., • Experience with programing, testing and training end users on various security systems., • Out of town travel work if required. In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • Compensation: $36.00 - $43.00/hour (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: This is a Travel Position, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionSalary: $30-$40 Position : Avionics Technician Division/Department: Maintenance/Shop Classification: Non-Exempt/Full-Time/Hourly Wage Range: $30.00 to $40.00 per hour Hiring Manager: Vice President Maintenance Purpose: Avionics Technicians perform preventive maintenance, inspections, troubleshooting, repairs avionics systems and installation of new avionics in aircraft in accordance with policies and procedures set forth in the Federal Aviation Regulations and our company standards. Values: • Safety: Always protecting the safety of customers and employees., • Integrity: Doing the right thing even when no one is watching., • Customer Service: Exceeding the expectations of customers and employees alike. Duties/Accountabilities: • Design and layout instrument panel upgrades up to and including complete instrument panel refurbishment and fabrication., • Strong knowledge and understanding of electrical and electronic systems, wiring schematics and diagrams., • Proficient in using diagnostic tools, installation tools, wire crimpers, soldering equipment, etc., • Attention to detail and problem solving., • Maintain detailed repair and maintenance records., • Work directly with customers, pilots and other maintenance personnel., • Work directly with Garmin or other venders for troubleshooting and/or installation guidance of avionics equipment., • Perform preventive maintenance, inspections, troubleshooting and repairs to airframe electrical and avionics systems., • Reads and interprets manufacturers maintenance publications, schematics, technical data and other specifications pertaining to work being performed., • Performs compliance of airworthiness directives, manufacturers service bulletins and other technical requirements., • Performs ground handling of aircraft including towing, jacking, leveling and taxiing., • Keeps a clean work area as required to maintain a professional and safe work environment., • Attend training classes as required to maintain a high level of proficiency. License/Experience Requirements: • FAA issued A&P (Airframe and Powerplant) Certificate., • FCC license a plus., • Possession and maintenance of a valid California drivers license and a satisfactory driving record., • Airport Security Background Checks/Fingerprints, • DOT Pre-Employment and Random Drug/Alcohol Testing Additional Qualifications: • High School graduate or equivalent. Minimum one (1) year actual and recent aircraft avionics / maintenance / modification experience is required., • Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory., • PC knowledgeable., • Read and speak English fluently Physical Requirements & Working Conditions: While performing the duties of this Job, the employee is required to do the following more than 30% of their day: identify problems and opportunities, reviewing possible alternative courses of action before selecting one, utilizing information resources available when making decisions; develop feasible realistic solutions to problems, recommending actions designed to prevent problems from occurring, and referring problems to upper management when necessary; develop long-range plans to solve complex problems or take advantage of opportunities, establish systematic methods of accomplishing goals; effectively convey ideas and information both in written and oral form; effectively read and understand information contained in memos, reports, bulletins; evaluate or make independent decisions, based on experience or knowledge, without supervision, ability to comprehend and follow instructions from supervisor, verbally or in written form; calculate basic arithmetic problems (addition, subtraction, multiplication, and division) without the aid of a calculator; set priorities in order to meet assignment deadlines. Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks; strength to lift and carry materials weighing up to 50 pounds and occasionally lift and/or move more than 100 pounds (10% Heavy Lifting-50lbs/over of 8-hour day; 30% Moderate Lifting-25-49lbs of 8-hour day; 60% Light Lifting-Under 25lbs of 8-hour day); ability to work in uncomfortable positions; vision to read printed materials and a computer screen; and hearing and speech to communicate in person and over the telephone. The employee is occasionally required to sit, stand, climb, balance, squat, bend, stoop, crouch, kneel, reach, turn, twist, push and pull. The employee is occasionally exposed to the following environmental factors: Unprotected heights, moving machinery, changes in temperature and humidity, dust, fumes, smoke, gases and other irritating articles, automotive equipment, radiant and electrical energy, slippery or uneven walking surfaces, excessive vibration. The employee is frequently exposed to the following environmental factors: working outside, working inside, working alone or closely with others, chemical hazards, solvents, grease or oils and excessive noise. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Kern Community College District.Bakersfield College -- Panorama Campus, CA.Below is our job description for this position.Important Instructions & Additional Information.Under the direction of an assigned supervisor, perform a variety of duties related to general plant engineering maintenance and se

You might serve in one of three roles: a Search & Rescue Medical Technician, a Dive Medical Technician or as a Special Operations Independent Duty Corpsman. For Deep Sea Diving Medical Technicians (DMT). Search and Rescue Medical Technician.

Camping World - - Responsibilities: Provide and document complete diagnostic test and repair or replacement services to customers; Perform electrical, plumbing, carpentry and appliance maintenance; Track all parts and materials used in repairs or replacements; Keep supervisor appraised of work prog

Aerotek - - Responsibilities: Manage and execute warehouse functions such as shipping, receiving, and inventory management.Ensure the warehouse remains clean and efficient.Assist with maintaining daily cycle counts and receive all incoming goods daily.Ship all Premium Freight Orders and other order

Energy - Solar & Storage [Field Technician / Maintenance Mechanic] As a Field Service Technician at Tesla, Inc.

Aerotek - - Responsibilities: Perform building repairs including walls, doors, hardware, flooring, and structural elements.Complete painting projects, building touch-ups, and parking lot striping as needed.Conduct restroom repairs including fixtures, dispensers, and minor plumbing tasks.Support rou

Government Jobs - Full time - $4,255.Monthly This recruitment is for Tehachapi locations only.Please be sure to indicate on the Agency-wide questions, where you will accept initial employment.Examinations: Written Exam (Weight 100%): Will be conducted for the purpose of assessing the applicant's k

Cintas Corporation - - Responsibilities: Drive company trucks to designated areas in the facility for unloading of soiled products; Load clean uniforms, floor mats and additional customer products onto trucks based on customer routes; Maintain the cleanliness of their work area; Meet or exceed a st

Government Jobs - Full time - $4,255.Monthly This recruitment is for Mojave and/or Rosamond locations only.Please be sure to indicate on the Agency-wide questions, where you will accept initial employment.Examination Schedule: Written Exam: qualified candidates will be notified five days prior

Personal Shopper] As a Grocery Delivery Driver at Shipt you will: Get paid to shop by filling customer orders and delivering to their door; Earn up to $22/hour* shopping for and delivering things people love from stores they trust; Set your own hours - part-time - full time - or any time; Be at leas

Round Table Pizza - 4200 Gosford Road Suite 101 - [Team Member / Crew Member / Customer Service / Courier] Seeking smiling; energetic; service minded candidates who want to be part of a team environment.Full-time and Part-time available.Nights and weekend shifts available.Prepares; packages and deli

Responsibilities: Deliver merchandise to customers within the assigned market meeting delivery and quality standards; Load, unload, and organize products in a safe and efficient manner; Perform pre-trip and post-trip vehicle inspections to ensure safety and readiness; Maintain an accurate record of

American Tire Distributors - - Responsibilities: Deliver products to customers and ensure on-time delivery; Unload and stage products at customer's place of business; Verify outgoing and incoming product for accuracy; Maintain records and paperwork for deliveries and compliance; Build professional

Delivery Driver] - Earn up to $23.Age 21+ or Older / Generate Extra Revenue (FT or PT) - As a Medical Delivery Driver, you will: Deliver medical supplies and equipment to various healthcare facilities and patients; Verify delivery locations and ensure all items are correctly labeled and packaged; Lo

Delivery Driver / Up to $31 per hour] - Choose Your Own Hours / Earn Guarenteed Minimums + 100% of Your Tips / Daily Pay & Instant Cashout - Skipcart is hiring delivery drivers for immediate positions in various locations across the country.As a Skipcart Delivery Driver, you will: Pick up customer o

DeliverThat - - Responsibilities: Deliver catering orders on schedule using the Driver App.

Delivery Driver / $18-$25 an hour] - Full-time or Part-time / Earn Extra Cash (Delivery, Tips, & Bonus Incentives) / Flexible Scheduling - Delivery.As a delivery driver with Delivery.Play a crucial role in ensuring prompt and efficient delivery of orders to our customers; Safely and responsibly oper

The Service Technician must be focused on delivering a positive experience to the customer and always focused on continual improvement for the customer experience and satisfaction. The Service Technician performs tasks and responds to a high volume of repair and maintenance service work orders rangi

EMCOR Group - - Responsibilities: Knowledge of chiller systems, refrigeration, heat pump, and HVAC equipment; Responsible for installing, inspecting, maintaining, and repairing heating, ventilation, and air conditioning systems; Perform preventative maintenance on the equipment such as vacuuming, c

Walmart Stores - 5075 Gosford Road - Responsibilities: Maintain and repair Walmart facility's Refrigeration/HVAC equipment and assets by utilizing commercial HVAC and Refrigeration skills and using hand tools, digital tools, power tools, and other equipment to complete jobs.Utilize the work order ma

EMCOR Group - - Responsibilities: Maintain daily operations of boilers.Complete daily checks and maintain necessary operating records.Perform PM maintenance and repairs to boilers and associated equipment.Perform monthly testing of all safeties.Complete annual tuning and inspections of boilers.

EMCOR Group - - Responsibilities: Maintain and repair central plant equipment, including chillers 100 tons and larger, motors, pumps, valves, controls, cooling towers, vane axial fans, and other auxiliary equipment.Overhaul of centrifugal chillers a plus.Schedule and manage site-wide maintenance, t

Trillium Staffing - - Responsibilities: Electrical troubleshooting, mechanical repairs, preventive maintenance, and safety critical tasks on a solar farm; Testing and troubleshooting inverter issues, replacing fuses, breakers, contactors, wiring, or connectors; Repairing or replacing tracker actuat

Delivery Driver (Part-Time) - Final Mile - Paso Robles, CA.The Delivery Specialist is responsible for delivering purchased merchandise to customers within the assigned market while meeting delivery and quality standards.The Delivery Specialist will deliver Legendary Customer Experience through build

Kern Community College District.Bakersfield College -- Panorama Campus, CA.Below is our job description for this position.Important Instructions & Additional Information.Under the direction of an assigned supervisor, perform a variety of duties related to general plant engineering maintenance and se

Warehouse Associate Opportunity.Custom Truck One Source has changed the way the industry looks at specialized truck and heavy equipment solutions.With sales, rentals, aftermarket parts and service, equipment customization, remanufacturing, financing solutions, and asset disposal, our team of experts

Trillium Staffing - JobID: 790115 [Maintenance Technician] As an Electrician Apprentice at Trillium Staffing, you'll: Install electrical systems; Assist with troubleshooting; Read blueprints; Follow safety protocols; Maintain tools and equipment; Learn from experienced electricians.

Delivery Driver (08210) - 865 Silver Spur Rd.Rolling Hills Estates, California, Western Pizza Enterprises, Inc.Come join the team at Domino's Pizza! Our business is booming, we are expanding and adding restaurants each year and we want the BEST delivery drivers and inside team members to join our te

Delivery Drivers at Whole Foods are key team members responsible for the distribution of products promptly to our customers.Drivers will ensure that items are delivered safely and on time to the correct destinations.Load, transport, and deliver items to clients or businesses in a safe, timely manner

O'Reilly Automotive - - Responsibilities: Develop sales relationships with installers/professional customers; Take and invoice customer orders over the phone and online; Direct efforts to accurately pick and stage parts for delivery, and route delivery specialists; Ensure delivery vehicles are serv

BCI Acrylic - - Responsibilities: Ability to install showers, tubs, wall panels, and basic bathroom fixtures; Complete installations in 12 days; Maintain clean and organized job sites; Work on the road visiting customers' homes; Provide professional workmanship and customer experience.