Trabajos installation technician en Hoboken, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware. Assist with all problems via phone, email, remote support, site visits, or along the driver’s route. They are responsible for the safe and productive operation of the fleet assets through the efficient performance of the department’s daily activities. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Install the Routeware tablet, and interface all components with the systems on the vehicles, including the in-cab video cameras, Samsara Cameras, and radios., • Maintain a high degree of customer service for all support inquiries and adhere to all service management principles, • Take ownership of user problems and be proactive when dealing with user issues, • Skill to disassemble vehicle interiors without damaging the vehicle or the interior components or where to locate information if disassembly procedure is unknown or not evident, • Identify component failures quickly, and replace as necessary, • Properly choosing and running wires, cables, and harness assemblies throughout the vehicle (including into the engine compartment, trunk/hatch and doors) with a competency to execute safe and serviceable methods in observing current capacity, weather proofing, passage of wire through metal, wiring alongside existing vehicle wiring, and where wiring passes near any moving parts, • Knowledge of various commercially available installation accessories such as wiring harnesses, high current power/ground wiring, circuit protection devices, etc., • General knowledge and familiarity of the appropriate application of various fasteners for equipment mounting and those encountered during removal interior panels with regard to the original integrity of the vehicle and subsequent installation, • Install Bluetooth hands-free cellular devices or modules, or wireless audio streaming devices or modules with driver safety as a priority, and in a way that maintains standard vehicle operation and safety features. Hands-free devices should be installed in compliance with all local and Federal laws, as well as in compliance with CEA recommended practices, • Approach all encounters with employees, customers and vendors in a friendly, service-oriented manner., • Always maintain appropriate confidentiality of all verbal and/or documented information., • Other projects and tasks as assigned. III. Responsibilities • Fluency in English, Spanish is a plus, • Applicants must pass drug test, • Valid driver’s license and a clean driving record is strongly preferred, • Travel in company vehicle to all locations in New Jersey, New York State, New York City, Pennsylvania, and Ohio as needed. Overnight stay(s) could required (Rare), • Three years (3) professional experience is preferred., • Training at an installation related school or program is a plus, • Should have a strong knowledge of PC’s, USB peripherals, Bluetooth, Serial (RS-232), Cellular Data, etc. Education and Experience: High School with 3+ years of related experience. Certificates, Licenses, Registrations or Other Requirements: None required. Other Knowledge, Skills or Abilities Required • Self-Starter with strong communication skills. Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;, • Required to exert physical effort in handling objects less than 30 pounds rarely;, • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often; Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $25.00/Hr.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada. Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Delivery Driver and Installation Technician This is no desk job. As an Appliance Delivery Driver and Installation Technician your days will be active, delivering and installing commercial laundry and/or air vending equipment to a variety of places around town. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life. Installation Technicians’ work is typically Monday through Friday. A Day in the Life of an Installation Technician: • Deliver and Install laundry or air equipment to customer's homes and client locations, • Deliver and Install ancillary technology (card readers, digital enhancements), • Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machines, • Prepare equipment for delivery (assemble required parts prior to loading on trucks), • Instruct customers and/or clients how to operate equipment in a safe and effective manner, • Staying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks:, • Work Life Balance!, • Medical, Dental, and Vision insurance, • 401k, • Vacation, Sick Time & Holiday Pay What we’re looking for: • High School diploma or equivalent, • Valid Driver's License, • Must be 21 years of age or older, • Basic Plumbing and Electrical knowledge, • Ability to pass pre-employment screening, • DOT Certification is a plus!, • 1 year of job-related experience in the areas of delivery and installation (preferred) training is provided, • Mechanical & Maintenance Experience/Knowledge, • Experience driving box trucks, • Ability to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related), • Knowledge with computers and smart phone technology, • Troubleshooting, • Route Driving Experience a plus!, • Customer Service CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, veteran or other protected status. CSC Service Works will comply with local and state laws regarding minimum wages, including requirements specific to cities, counties, and municipalities.

Powell Service Division is looking for a highly skilled and motivated Senior Service Technician interested in joining one of the nation’s leading providers of medium and low voltage switchgear. Powell Service Technicians are responsible for ensuring the end to end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, corrective maintenance, and periodic supervision of small crews. The ideal candidate thinks critically, can work well independently, and is a problem solver. Senior service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified Service Technicians are provided safety and technical training with full office support. Once qualified, Technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, smart phone, and company expense card. Key Responsibilities • Adhere to Powell’s current safety and quality standards, • Complete all site documentation in in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing., • Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service Manager, • Maintain flexible work hours, which will include over time and periodic weekend support, • Comply with Powell ‘s standard operating procedures, documentation processes, safety processes and protocols., • Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner, • Able to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects., • Switchgear and PCR installations, • DC / AC Switchgear, • Knowledge of Traction Power Systems, • Troubleshooting mechanical repair issues., • Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing., • Perform regular inspections of any issued vehicle or calibrated equipment/tools., • The Senior Service Technician must possess a high school diploma, as well as three or more years’ experience, as a shop and / or field electrical / technician., • Senior Service Technicians must exhibit knowledge of Electrical Industry manufacturing standards., • Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear., • Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements., • Demonstrate knowledge in the design and manufacture of bus and structural modification projects., • Powell also requires that all Service Technicians undergo Factory Certified Technician training and maintain a passing grade., • The Senior Service Technician must be experienced in the art of writing accurate and complete test reports, project summaries and has the ability to explain anomalies found on a given project., • Knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory; contactor and circuit breaker schematics are a must., • The Senior Service Technician must be able to perform of hi-pot testing and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection; acceptance testing of dielectric apparatus using over voltage testing; mechanical and electrical functional testing of circuit breakers and electrical switchgear., • The Senior Service Technician will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel., • Additional requirements include but are not limited to:, • Working knowledge with using the following test equipment: Hi potential, DLRO, Multi-meter, dial caliper., • Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability., • Must have verbal and written communication skills., • Proficiency in problem solving is a preferred., • Willing to attend in-house and out-side training., • Willing to travel up 85% of the year. The Senior Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms., • The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus., • Additional requirements are as follows:, • Medium physical effort (lifting/moving up to 50 pounds), • Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time., • Work at heights greater than 10’., • Work on ladders of all types. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job Description We are in search of a proficient HVAC and Refrigeration Technician to join our team. The ideal candidate will be skilled in the installation, maintenance, and repair of HVAC systems. Responsibilities: • Install new heating, ventilation, air conditioning, and refrigeration systems, • Inspect and perform equipment repairs and replacements, • Conduct routine preventative maintenance, • Respond to emergency maintenance requests, • Adhere to all safety policies and procedures, • A minimum of 3 years of experience in HVAC or related fields, • Universal EPA 608 certification required, • Proficiency in reading and interpreting HVAC wiring diagrams, • Ability to handle physical workloads effectively, • Strong problem-solving and critical-thinking skills

Job Description Job Summary Commercial HVAC Company seeking skilled Installation Technicians and/or Apprentices to join our team. The ideal candidate will be responsible for the installation, maintenance, and troubleshooting of various systems. This role requires a strong understanding of system design, mechanical knowledge, and the ability to read schematics. The Installation Technician will work closely with clients to ensure that installations meet their specifications and operate efficiently. Boiler and Piping knowledge a plus! Responsibilities • Conduct thorough system design assessments to determine the best installation practices., • Read and interpret schematics and blueprints to execute installations accurately., • Utilize power tools and equipment safely while adhering to industry standards., • Perform routine maintenance checks on installed systems to ensure optimal performance., • Troubleshoot issues related to various systems., • Collaborate with team members to complete projects on time and within specifications., • Proven experience in installation or a related field is preferred., • Strong mechanical knowledge with the ability to work with various power tools., • Familiarity with computer networking principles and practices., • Ability to telecommunicate effectively with clients and team members., • Excellent problem-solving skills and attention to detail. Job Types: Full-time, Part-time, Contract Pay: $20.00 - $45.00 per hour Schedule: • 10 hour shift, • 8 hour shift, • Rotating shift, • Staten Island, NY 10309: Relocate before starting work (Required) Work Location: In person

Job DescriptionBenefits: • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, deep cleaning units, or refilling non-toxic refrigerants., • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge., • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician, • Experience in Ductless Mini Split system, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of heat pumps, air handlers, and central systems, • Ability to climb ladders, crawl, and lift 40 pounds

Job Description Title: Low Voltage Structured Cable Technician Level 2 Location: Long Island, NY Coranet Corp. is seeking a Low Voltage Structured Cable Technician Level 2 to join their Field Service teams. The Technician will work under our Lead Cable Technicians and supervise Level 1 Technicians on Coranet's IT infrastructure technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, AV projects, and programming Security, AV, and WiFi systems throughout Long Island with work extending into New Jersey and Metro NY region. Candidates should be based on Long Island. Responsibilities: • Installation and Testing:, • Install, terminate, label, and test copper (CAT5e/CAT6) and fiber (single mode/multi mode) cables., • Dress-in, terminate, label, and test copper patch panels., • Perform patching according to customer-provided switch matrices., • Work with General Contractors and other project trades such as electrical, furniture, carpet, etc., • Receive and inventory drop-shipped project materials., • Provide moderate supervision and guidance to Level 1 Technicians. Must have demonstrated experience: • with copper and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing., • with copper patch panel: dress-in; terminations; labeling; and, testing., • with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer., • in working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc., • with the receipt and inventory of drop-shipped project materials., • with LAN rack: assembly; grounding; cable runways; cable tray; etc., • Valid driver's license, • Access to a motor vehicle and willingness to travel across NJ, PA, etc., • Finger and wrist dexterity, hand/eye coordination., • Ability to work from heights using proper fall protection., • Proficiency with small hand tools and power tools., • Ability to climb stairs, ladders, and/or scaffolds., • Physical ability to walk, stand, bend, lift up to 50 lbs., and drive a vehicle., • Available for off-hour assignments - weekends and nights., • Certifications, e.g., CommScope, Corning, etc., • Capable of operating with minimal supervision., • Willing to travel, work on remote teams while onsite performing project-driven initiatives, • Job is usually performed in indoor/outdoor environments under multiple environmental conditions., • Ability to accept periodic assignments that involve travel away from the immediate district office area based on client needs, business needs, and project scope., • Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards., • Must be able to work in the United States.

Job Description We are looking for a motivated and skilled HVAC Technician who is eager to grow into a leadership role as a Project Foreman. This is an excellent opportunity for a hands-on technician who wants to advance their career by developing supervisory and project management skills. Key Responsibilities: • Perform installation, maintenance, and repair of HVAC systems, as required, according to company standards., • Troubleshoot and resolve HVAC system issues efficiently and safely., • Support project documentation and reporting efforts., • Participate in safety meetings and comply with all safety regulations., • Collaborate with project teams and subcontractors on-site., • Demonstrate leadership potential by taking initiative and learning project management tasks., • 5-7+ Years experience as an HVAC Technician or relevant technical training., • Strong mechanical aptitude, problem-solving skills, familiarity with field service apps for work tickets etc., • Willingness to learn and grow into a supervisory role., • Good communication and teamwork skills., • Ability to troubleshoot effectively, read blueprints and technical manuals., • Valid driver’s license and clean driving record., • Up to date certifications – FDNY F-60 & G-60, OSHA 40 or 62 and EPA 608 are mandatory.Company DescriptionWe do HVAC work in the NYC metropolitan for renovations and new construction.We do HVAC work in the NYC metropolitan for renovations and new construction.

Job Description We are currently seeking an experienced HVAC Service Manager to join our team for a position in the New York, NY area. Job Responsibilities: • Assumes direct ownership of service operations to achieve high-level profitability, including management of supervisory, technical and dispatch staff, ensuring high productivity and superior technical and customer service., • Ensure consistency and excellent service through oversight of daily routine activity, maintenance scheduling and operational requirements, including new equipment start-ups and warranty issues., • Evaluates work load and available resources to best utilize manpower and maximize profits., • Oversees training and development of all staff, including but not limited to: performance management, technical training, proper use of tools and materials, safety programs, compliance assessments and technician debriefings, providing guidance and/or corrective action as necessary., • Resolves customer complaints to ensure customer satisfaction and issues regarding service technician performance., • Ensures that materials and equipment are ordered and dispensed for scheduled jobs, and schedules repairs for parts to ensure minimal down-time in job completion., • Generates reports and measures of departmental operations as well as records on all inventory, tools and vehicles. Reviews reports with management., • Reviews and ensures accuracy of all billing, time sheet records, purchase invoices and job related expenses., • Prepares and presents quotes for add-on/replacement of equipment, preventive services and/or remediation, on request., • Ensures budgeting guidelines are met by prioritizing expenditures, assists in the preparation of capital and operations budgets, and works closely with the accounting department to deliver on all client receivables and supplier payments., • 5-years as a Commercial HVAC Service Manager managing a sizeable staff., • Familiarity with the service and installation side of the business., • Previous experience working with HVAC/ controls equipment. · Bachelor’s Degree preferred. Job Type: Full-time Pay: $125,000.00 - $150,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Evening shift, • Every weekend, • Night shift

Job Description HVAC Service Technician Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience preferred) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Education · Technical trade school diploma and training certificate is a plus · Minimum of 3 years’ experience in a commercial HVAC application · OSHA 30 hours

Job Description We are a growing tech company specializing in installation and monitoring services, looking for a skilled and motivated Low-Voltage Technician to join our team. Responsibilities: -Install, maintain, and troubleshoot security camera systems and other low-voltage equipment. -Work directly with clients to ensure high-quality service and satisfaction. • Handle wiring, cabling, and system configurations with precision., • Manage projects efficiently and meet deadlines. Requirements: -At least two years of experience as a low-voltage installer. -Strong problem-solving skills and technical expertise. -A hustler mentality—someone ambitious and ready to put in the work. -Ability to work independently and as part of a team.

Job Description Systems Administrator/Help Desk Technician Lee Spring Company, a global manufacturing company based in Brooklyn, NY for over 100 years, is seeking a skilled Systems Administrator/Help Desk Technician. This position will be responsible for the installation and maintenance of our hardware, software, and global networks. The applicant should be a seasoned professional that can work independently with minimal supervision. Principal Duties and Responsibilities: • Manage and support all aspects of the LAN/WAN environment and its security., • Support and oversee the global backup and recovery systems., • Maintain all company owned assets, physical and virtual., • Upkeep multiple production and development environments., • Provide support to end users leveraging a ticket system., • Ensure system reliability and uptime through business continuity planning and testing., • Provide recommendations for system upgrades and improvements., • Manage software installation, updates, patches, and fixes through automation., • Coordinate with 3rd party support to allow troubleshooting., • Strong knowledge with the Microsoft stack (Windows, Server, SQL, Dynamics, Hyper-V)., • Experience with managing an Azure tenant with Entra., • Experience with Dell Enterprise Hardware., • Exposure to automation and scripting with tools like PowerShell., • Ability to multi-task and function collaboratively as a member of our IT Team., • Excellent customer service skills., • Strong technical documentation skills. This is an in-office position located at our corporate headquarters in Bristol, CT. Benefits: We offer a comprehensive benefits package, which includes: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement

Job Description HVAC Installer/Service Technician –Newark, NJ (Remote) Join BGIS Integrated Technical Services (ITS), a global leader in facility management, as an HVAC Installer/Service Technician in Newark, NJ, and surrounding areas. If you’re a skilled HVAC professional, seize this opportunity to grow your career with competitive pay, comprehensive benefits, and a supportive, innovative team. Why BGIS ITS? • Competitive Pay: $31–$42/hour ($64,480–$87,360 annually), • Unique 3&3 Tech Flex Program: Choose $3,500 cash bonus, 40 extra holiday hours, or $3,500 in technical training, • Company-Provided Perks: Take-home vehicle, cellphone, tablet, annual boot voucher, • Generous Benefits: 5% 401(k) match, 48–168 hours PTO, 7 paid holidays, health/life/disability coverage, • Career Growth: Continuous training, clear advancement paths, and global network of 7,000+ professionals As an HVAC Installer/Service Technician, you’ll install and maintain commercial HVAC systems, ensuring peak performance and client satisfaction. Key duties include: • Installation: Perform pipefitting, brazing, and soldering for refrigerant piping; troubleshoot installation challenges, • Service: Conduct maintenance, repairs, and emergency service on HVAC and refrigeration systems, • Collaboration: Work with dispatchers and supervisors for seamless project execution, • Required: 2–5 years HVAC experience, EPA Certification, high school diploma/GED, valid driver’s license, ability to pass drug/background checks, • Preferred: HVAC apprenticeship, Journeyman’s license, or technical training, • Physical: Lift 75 lbs., climb ladders, work in confined spaces, wear PPE, • Provided: Service van, iPad, iPhone, PPE Unlike local competitors, BGIS ITS offers global opportunities, flexible benefits, and fully stocked vehicles, empowering you to excel in a collaborative, innovative environment. Apply Now! Ready to elevate your career? Join BGIS ITS and start your journey with a global leader. Visit BGIS Careers Careers to submit your application today! BGIS ITS is an equal opportunity employer. We are committed to creating an inclusive workplace where diversity is celebrated, and all employees are valued. Our company culture includes a robust mix of sound business practices and employee initiatives that promote personal and professional development, work/life balance, health and wellness and community involvement. The Company is an equal opportunity employer. We believe every employee has the right to work in surroundings that are free from all forms of unlawful discrimination. We are committed to providing equal employment opportunity to all employees and applicants without regard to race, color, religion, gender, national origin, age, disability, ancestry, creed, marital status, sexual orientation, or Veteran or military status, genetic information or any other basis prohibited by local, state or federal law in the relevant jurisdiction. This policy applies to all terms and conditions of employment including, but not limited to employment, advancement, assignment and training. BGIS is committed to strengthening our diversity through recruiting and retaining minority and women professionals from all backgrounds. Our commitment is consistent with our recognition that it is the outstanding people within BGIS who the source of our strength has always been. We recognize that promoting diversity is an integral component of our continuing quest for organizational excellence. This commitment to Equal Employment Opportunity is made equally as a social responsibility and as an economic and business necessity. Anyone with questions or concerns regarding Equal Employment Opportunity should contact their direct supervisor or the Human Resources Department without fear of retaliation of any kind. Company DescriptionBGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. When you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor. Visit us online at for more information.BGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. \r\n\r\nWhen you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor.\r\n\r\nVisit us online at for more information.

Company Description AtlantisUGS provides expert AV and video conferencing services to leading system integrators and IT providers nationwide. With a focus on AV installations since 2006, AtlantisUGS has extensive experience across various settings and markets, serving clients from in the Fortune 100 space. Role Description This is a full-time on-site role for an Audio Visual Technician and/or Field Engineer at AtlantisUGS in New York & NJ Metro area. The role involves daily tasks such as installation of AV systems, including wall mounted TV's & cameras, ceiling mounted video projectors, microphones, WAP's, transmitters & receivers for AV transmissions, table microphones, cable dressing, etc. OSHA 40 is mandatory. This is a construction based position. DO NOT APPLY if you are a sound engineer looking to be a music producer, or if you are a rental and staging technician looking to just set up gear. We focus ONLY on permanent AV installation of systems. Qualifications • Audio Visual (AV) Systems and Video Conferencing skills. CTS and /or CTS-I certifications are welcomed., • Troubleshooting expertise in audio, video and control systems., • Experience with video wall installations, including DvLED video walls., • Knowledge of structured cabling and networking, • Certifications in AV technology or related field, Biamp, Crestron, AMX, Extron., • Strong problem-solving abilities, • Excellent communication and teamwork skills, • Previous experience in IT, AV, or construction industry

Swan Analytical USA is seeking a Field Service Technician to join our dynamic team. The Field Service Technician will play a crucial role in ensuring the optimal functioning and performance of our analytical instruments at customer sites. As a Swan Field Service Technician, you will be responsible for on-site installation, maintenance, troubleshooting, and repair of our instruments, as well as competitors, providing outstanding technical support to our valued customers. This role will require up to 100% Travel (Mon-Fri only). Key Responsibilities: • Installation and Commissioning:, • Install and commission SWAN analytical instruments at customer locations., • Ensure proper calibration and configuration to meet customer specifications., • Preventive Maintenance:, • Conduct routine preventive maintenance activities to ensure instruments operate at peak performance., • Keep detailed maintenance records and update service documentation., • Technical Support:, • Provide exceptional technical support to customers via phone, email, and on-site visits., • Troubleshoot and diagnose issues with instruments promptly and effectively., • Repair and Upgrades:, • Perform instrument repairs, replacements, and upgrades as required., • Coordinate with the support admin and manager to source and order replacement parts., • Customer Training:, • Train customers on the proper use, maintenance, and calibration of SWAN instruments., • Offer guidance on optimizing instrument performance., • Documentation:, • Maintain accurate service records, equipment logs, and reports., • Ensure timely submission of service reports and required documentation., • Continuous Learning:, • Stay up to date with SWAN's product advancements and industry trends., • Participate in training programs and workshops to enhance technical knowledge.

Job DescriptionWHO WE ARE Within each Color Factory location, visitors are invited to experience the joy of color through interactive installations, immersive rooms, and carefully curated moments. Color Factory collaborates with artists, art institutions, nonprofits, and brand partners to tell compelling stories that make life just a little more joyful. ABOUT OUR TEAM We are passionate about tapping into the joy of color through the expression of art to create experiences that make people of all ages smile, connect, remember, and feel like kids again. We believe in color’s unique ability to spark delight and to break down barriers so people can reconnect with themselves and others, and make color art accessible to and approachable for all. ABOUT THE ROLE The Facilities Technician (FT) ensures the venue’s operational efficiency by executing routine and emergency maintenance, including HVAC, electrical, and plumbing repairs. This role supports exhibit installations and breakdowns, adheres to safety protocols, assists with custodial emergencies to maintain a clean environment, and conducts quality checks under the direction of Facilities Supervisors to ensure all maintenance and presentation standards are met. ABOUT YOU * You have the experience to navigate areas of expertise with confidence. Stays current with industry trends and practices, and can spot promising new ones on the horizon. * You possess a friendly and accessible disposition. Creates comfortable conditions to communicate, meet with, and share candid information. * You are self-motivated, resourceful, and proactive. Don't hide from problems or let them persist. Offers unsolicited help and support, and eagerly rolls up their sleeves to pitch in wherever needed. * You can be counted on to see tasks through to completion. Can operate independently or with others to tie up loose ends and produce a successful outcome in line with company vision and standards. * You proactively seek opportunities to help individuals and the team get stronger. Don't hesitate to share developmental feedback and to provide encouragement when times are tough. Helps others do more than they thought possible. * You continually consider how each idea enhances or detracts from the customer experience. Doesn’t sacrifice the customer experience for the sake of convenience or efficiency. Raises concerns when the customer experience is potentially at risk, even in difficult situations or conversations. SPECIFIC QUALIFICATIONS * Must be 18 years or older * Previous experience in facility maintenance, technical operations, or exhibit installation preferred. * Strong technical knowledge in HVAC, electrical, plumbing, and general maintenance. * Ability to troubleshoot and diagnose facilities and exhibit issues efficiently. * Detail-oriented with a proactive approach to problem-solving. * Strong teamwork and communication skills to collaborate with multiple departments. * Ability to follow safety procedures and uphold high cleanliness standards. * Comfortable working in a fast-paced, guest-facing environment. * Availability to work flexible schedules, including weekends and holidays. * Ability to lift and carry up to 50 lbs. BENEFITS & PERKSCOMPENSATION PACKAGE Medical (FT Only) Dental and Vision insurance Critical Illness, Accident and Hospital Indemnity 401k Retirement Plan Employee Assistance Program Paid Safe & Sick Leave and Paternity Leave Commuter Benefits Vacation Policy Paid Time Off Complimentary tickets Shop and Friends & Family discounts Competitive Rates Annual Market Analysis 401k Employer Matching HSA Employer Contributions Student Loan Reimbursements EQUAL EMPLOYMENT OPPORTUNITY STATEMENT We are an Equal Employment Opportunity (“EEO”) Employer. It has been and will continue to be a fundamental policy of Color Factory not to discriminate on the basis of race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, domestic violence victim status, sexual orientation, age, national origin, alienage or citizenship status, veteran or military status, disability, medical condition, genetic information, caregiver status, unemployment status or any other characteristic prohibited by federal, state and/or local laws. This policy applies to all aspects of employment, including hiring, promotion, demotion, compensation, training, working conditions, transfer, job assignment, benefits, layoff, and termination.

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Ground keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Job Description SUMMARY This position is for a field technician who is experienced in boiler installation, maintenance and troubleshooting. The candidate is experienced at utilizing mechanical capabilities to perform maintenance on Commercial / Industrial boilers. The position is in the NYC & Long Island area. The Candidate will be working alongside an experience & factory trained service technician who will instruct on all areas of repair and maintenance. In the first months of this position, the Candidate will be trained on Cleaver-Brooks boilers and participate in a program where they will tag along with the cleaning crew and the A Level Technicians. DUTIES AND RESPONSIBILITIES: • Perform routine maintenance on boiler equipment and systems, • Maintain low pressure boilers, high boilers, power boilers, steam boilers, or hot water heating systems., • Replace defective valves, filters, or steam gauges., • Monitor boiler systems to ensure it is operating safely and properly; facilitate periodic cleaning., • Address any problems with boiler systems and notify maintenance when needed., • Maintain neat and professional demeanor to guarantee an excellent customer service experience, • Contact supervisor concerning potentially dangerous equipment or safety violations., • OSHA 30, F-60 & G-60 is required, • 3+ years experience in Boiler Maintenance, Combustion, basic boiler circuits (not PLC controlled), • Technical/vocational school training and experience working with HVAC or industrial boilers., • Extensive knowledge of industrial boiler operations and maintenance., • Excellent analytical and problem-solving skills, • Excellent mechanical skills, • Ability to follow OSHA rules as to safety procedures and processes., • Stand-by (weekend / holiday) required on rotation. Company will provide “specialty tools” as permitted, must have own hand, • Physically able to inspect and repair boilers, • Able to work in confined spaces, • Must be able to lift 75 pounds at a time, • Ability to perform some welding is a plus, • Must pass a drug screening and background check prior to employment (at the company’s expense) Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.

Job DescriptionHydraulics Service Technician- $40-$50/HR Integrity Trade Services is hiring a Hydraulics Service Technician in Staten Island, NY. Must have Mechanical and Hydraulic Aptitude Required. Our customer is expanding and has a family type of environment where all members work together as a team to assist each other, grow the company, and support the challenges that lay ahead. They have worked hard to build a team of good people. They are committed to providing their customers with the highest quality parts, service, solutions, support, and engineering. Our customer is looking for long term team members who want to be an integral part of their growing business where each member has a direct contribution on the direction they take as a company. Hydraulics Service Technician Responsibilities: • Installation, maintenance and repair of hydraulic systems and components, • Read blueprints and diagrams while troubleshooting and diagnosing problems, • Perform preventative maintenance to avoid operational failures of hydraulic systems, • Welding, metal fabrication and electrical assembly, • Provide drawing review and suggestions to investigate and repair of hydraulic equipment, • Disassemble and reassembly hydraulic components Disassemble, repair and reassembly hydraulic cylinders Hydraulics Service Technician Qualifications: • Experience in fabrication and assembly/repair of hydraulic systems, • Ability to effectively read hydraulic schematics., • Experience with different hydraulic components, both service and troubleshooting, • Experience with replacing seals and repair of hydraulic cylinders, • Must be willing to work odd hours in a non - climate control and onboard towboats, tugboats, offshore supply vessel, 24-7-365 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Full Compensation Package Available to include: • Medical, Dental, Vision, 401K, Life Insurance, Paid Holidays and Vacations, • Company truck, Credit Card, Company phone, Gas Card and On-Call after probationary period #IND #ZR

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER #JCM24

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls, • Carrying out all maintenance duties safely that are required for this position About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of HVAC, electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • HVAC experience and/or license, • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionBenefits: • Employee discounts, • Free uniforms, • Opportunity for advancement, • Paid time off Job descriptions Title: Automotive Technician Job Type: Full-time Summary S & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Job Description General Summary The building Superintendent is to maintain the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The building Assistant Superintendent will carry out assigned duties in a safe manner and other duties as requested by the Superintendent and/or Property Management personnel. Essential Job Functions/Responsibilities: A building Superintendent must possess a variety of skills encompassing most of the construction trades, including: basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as being able to perform all the responsibilities of a porter, should the situation warrant. The building Superintendent must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. The building Superintendent will oversee or be involved with such items as touch up paint in the lobby, repair of a faulty house lock, troubleshooting an open electrical short, replacement of a faucet, proper handling of an extension ladder and inspection of resident issues all in the same day. The work involves building management, project management, report production, and using state of the art property management software to achieve results at the residential building. • Vacant Apartments: Daily inspections of all vacant apartments. Direct staff accordingly to complete tasks in vacant apartments. Ensure apartments labeled as ‘READY” are perfect on a daily basis., • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights and GFI receptacles., • Painting: Oversee and schedule painting needs in common area and apartments, • Appliance repair: includes the repair, replacement, or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Groundskeeping: maintain neat and safe conditions between weekly landscape contractor visits. Report, • Cleaning/housekeeping includes supervision of staff to ensure we maintain a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas., • Snow removal: includes shoveling, blowing, or plowing snow away from covered walkways and driveways, and laying down rock salt/ice melt products atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with residents when providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent Gateway in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner following company guidelines., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner as per company guidelines., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide a high level of service to the residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent and/or management personnel of shortages., • Mechanical systems: Inspect and maintain boilers, pumps & other mechanical systems. Report concerning issues to the superintendent or management personnel., • Supervise: As part of a management team effort provide supervision of building staff (Security Guards / Handymen / Porters/ Doormen), • Identify: Responsible for identifying any building work that is required and communicate it to the Sr. Superintendent /Property Manager., • Vendor Management: Shared responsibilities to supervise any contractor work in the building., • Compliance: Shared responsibilities to ensure overall compliance of all equipment and systems., • Service Contracts: Responsible for monitoring & managing all service contracts for the building., • Cleanliness / Curb Appeal: Responsible for cleanliness & appearance of the building., • Inventory: Responsible for inventory management of all cleaning supplies & materials., • Service Requests: Responsible for the timely completion of all tenant service requests., • Apartment Turnover: Responsible for the timely preparation of apartment turn-over process, • ADP Payroll & Union Staff Time Off Management – Work with Sr. Superintendent to ensure union payroll is completed as per deadlines. Manage union staff time off to make sure all positions are properly covered. Qualifications: • Appearance: Neat, clean well-groomed appearance, • Education: College degree in Engineering or related studies or equivalent - a plus, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler and residential sprinkler systems., • Experience: 5 to 8 years of experience as a building Superintendent., • Manage Staff: 3-to-5-year experience supervising a diverse staff., • Interpersonal & Communication: Excellent verbal & written communication and interpersonal skill including conflict resolution necessary for working with staff and coworkers., • Diversity: Experience working with people of different income levels and ethnic backgrounds., • Organization: Proficient in the use of paper and software organizational systems., • Computer Skills: Must be proficient and comfortable using the computer and a full suite of software programs, • Must be able to work effectively in a fast paced, dynamic environment, • Must be able to quickly organize and shift priorities, • Must be able to meet tight deadlines with quality work, • Must have a strong & committed work ethic An employee in this position must be knowledgeable and skilled in a variety of trades: • Working knowledge of boilers and building systems, • Working knowledge of mechanical systems, • Working knowledge of general plumbing, • Working knowledge of electricity and electrical systems, • Working knowledge of carpentry, • Constant need (66% to 100% of the time) to document maintenance and complete forms, review manuals and operating instructions, read cautionary labels, respond to written instruction from staff and residents. Constant needs to see small detail when performing routine maintenance duties., • Frequent need (33% to 60% of the time) to see things clearly beyond arm’s reach (oversee assistants, observe problems throughout the property)., • Constant need (66% to 100% of the time) to communicate with assistants, resident staff, vendors and residents. Must use listening skills to diagnose needed repairs, etc., • Constant need (66% to 100% of the time) to verbally communicate with assistants, staff, peers, supervisors, vendors and residents., • Indoors (66% to 100% of the time). Frequently outdoors (33% to 66% of the time), all conditions, often for extended periods., • Occasional exposure (1% to 33% of time) to paint fumes, solvents, adhesives, etc. Example: Apartments during/after make-ready., • Frequent need (33% to 66% of the time) to work in awkward and confining positions. Reasoning Development Must be able to apply principles of logical thinking to a variety of practical situations and accurately follow standardized procedures that may occasionally involve minor deviations. Needs ability to think rationally beyond a specific set of instructions and problem solve. In order to achieve success, the Management team must embrace certain core principles and values. • Honesty, • Integrity, • Competence, • Tenacity & Enthusiasm, • Creativity This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The organization is an equal opportunity employer.

Job DescriptionSalary: Negotiable based on experience As the Field Supervisor you will utilize your extensive field experience, skills, honesty, and work ethic to better Mico Cooling Corp. for its clients and employees. Work in close conjunction with Operations Manager to ensure the continued success and profitability of the company. This position is primarily field based with office work as needed. Successful candidate MUST HAVE AT LEAST 8-10 YEARS of related field experience in HVAC/R and have the ability to successfully pass a fingerprint and background check. HVAC/R Field Supervisor Role: • Primary responsibility of field HVAC/R and cooking equipment personnel., • Authority to hire, reward, discipline, and terminate field personnel as needed for the good of the company., • Primary responsibility to ensure manpower needs for service and maintenance work., • Responsibility to ensure after hours/weekend calls are completed in a prompt and efficient manner, • Work with installation/job department on manpower, material, and equipment needs to ensure timely completion of all company work., • Responsible for continued training/education of technicians, • Review callback and incomplete ticket reports with technicians to assist them in bettering their skill level and performance., • Assist in creating and upholding company policies and procedures., • Address callbacks with technicians., • Assist in on call scheduling, responsibilities., • Perform performance reviews every year for each technician. Perform 90 day review if promised., • Works with management team to ensure client satisfaction.

Job DescriptionDescription: Build your career with a company that has been a trusted security alarm provider in the NYC area for over 50 years. DGA Security provides a superior security service for high-end businesses throughout the greater NYC area and nationwide. DGA Security has immediate openings for Security Installation Technicians to join our team in midtown Manhattan. If you are looking for a long-term career with a well-established, values-driven company – not just a job – this opportunity is for you. DGA provides all employees with the opportunity to succeed through extensive and on-going training to build technical skills and to provide customer service at the highest levels. We encourage professional growth and offer a competitive compensation package including excellent benefits. Role Responsibilities: • Installation, programming, testing, and service of electronic security systems including intrusion alarm systems, access control systems, and CCTV/video systems., • Interpret and work from blueprints and schematic diagrams., • Test and troubleshoot circuits and sensors to ensure they perform as designed., • Provide clear system demonstrations and explain functionality to customers — including how to avoid false alarms.Requirements: Role Requirements: • 1+ years of experience working with low-voltage or electrical systems/wiring., • High school diploma or equivalent., • Technical or Trade School degree in electronics or related field is a plus., • Must maintain professional appearance and conduct., • Ability to read and work from schematic drawings., • Proficiency with hand and power tools., • Must possess and maintain a valid driver’s license., • Working knowledge of computer use, proficiency is a plus., • Benefits package that includes medical, dental, vision, 401K and PTO., • All required tools, tool bags, equipment and company branded uniforms., • Ongoing training and development – we invest in your growth from day one., • A company culture built on executing with excellence, teamwork, ownership, and innovation! DGA is an Equal Opportunity Employer. Here, we believe that embracing innovation is not just a core value, but a responsibility. We are committed to building an inclusive and diverse workplace where everyone, regardless of race, gender, age, disability, sexual orientation, religion, or any other characteristic, feels valued and supported. We provide equal opportunities to all applicants and employees and strive to foster a culture where differences are celebrated, and everyone's voice is heard. Your unique perspectives and experiences are what drive us forward.

Job Description A-V Services Inc., a leading AV company with multiple fortune 100 contracts within the financial, pharmaceutical and computing industry, seeks a Freelance Audio/Visual/Multimedia Support Technician for on-site support. Must have great customer service with emphasis supporting the corporate work sector. Additionally, comprehensive audio video skills. Ideal candidate would have Associates level college degree in a technology related field and/or minimum 3 years of previous employment with AV support responsibilities in the AV industry. Our corporation is looking for an individual who possesses a full understanding of all areas of the A/V field including but not limited to: Ability to operate and troubleshoot most AV equipment and systems, like: • Projection systems / display devices, • Crestron control systems, • Switching / routing / interfacing technology, • Up-to-date awareness of AV and IT technologies and their features, • Ability to operate digital audio consoles (A1), • Ability to read and follow AV system flow diagrams and support documentation, • Technical AV certifications such as CTS a plus, • Proficiency in the use of personal computers including such programs as MS Word, Excel and Outlook., • Positive, professional image, • Ability to remain calm under pressure, • Ability to operate related AV technologies required for the job, i.e. Town Hall events, conference room meetings, video conference based events (sometimes using Telepresence) At AV Services Inc. we are committed to fostering an inclusive and diverse workplace where every team member is valued and empowered. We are proud to be an equal opportunity employer, welcoming all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic that makes you unique. Our Commitment to Diversity and Inclusion: Our employees are our greatest asset, and we believe that the diverse perspectives and experiences they bring are key to our success. We celebrate and encourage differences in age, ethnicity, family or marital status, language, physical and mental abilities, socio-economic status, and more. These unique attributes contribute to our vibrant culture, enhance our reputation, and drive our achievements. Why Work With Us? • Inclusive Culture: We embrace diversity in all its forms and are dedicated to creating an environment where everyone feels respected and valued., • Empowerment: We support our employees' growth and self-expression, recognizing that their individual talents and innovations are vital to our success.

Job DescriptionOverview Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description The Senior Applications Engineer is responsible for software-specific support of our installation team to include the integration / interface of multiple disparate software applications into fully functioning solutions. This position will be responsible for all levels of systems head-end commissioning, upgrades, and advanced diagnostics to achieve the defined functionality of systems operation. The Senior Applications Engineer should be capable of utilizing existing SDK's and/or API's to ensure the desired level of integration and shall be capable to performing customized integration between software applications. The Senior Applications Engineer's schedule will be coordinated by the Operations and Project managers to be effectively and efficiently utilized. Salary Range: $100,000 - $135,000 annually RESPONSIBILITIES: • Capable of advanced integration between disparate electronic security systems, • LAN & Network configurations experience to include wireless communications system, • Perform system diagnostic and troubleshooting duties to ensure a fully functioning system, • Work with Project Managers, End Users and Technician team to provide assistance in regards to the software systems, • Troubleshoot project issues and engage appropriate resources as needed., • Escalate significant issues to management team as needed., • Work with the Management team to coordinate project and work schedules to ensure project efficiencies, • High school diploma or equivalent required; a BA/BS degree is preferred, • In-depth knowledge of industry-leading security system and equipment providers Certification with major enterprise-level security and access control systems preferred, • Decision-making and problem-solving ability, • Ability to read and understand advanced technical information and documentation, • Proficient with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Excellent verbal and written communication skills, • Ability to establish and maintain effective working relationships with both internal and external customers, • Must be detail-oriented and organized, • Strong analytical and problem-solving capabilities, • Strong time management skills, • Self-motivated with the ability to motivate and influence others, • Must be able to manage multiple tasks while meeting strict deadlines, • Possess excellent follow-up skills, • 7+ years of direct experience handling advanced access control and CCTV, • Network configuration and troubleshooting., • Certifications in the following software platforms are preferred:, • AMAG, • Brivo, • Exacq, • Genetec, • Lenel, • Milestone, • NiceVision, • ONSSI, • Open Options, • Salient, • Salary Range: $100,000 - $135,000 annually, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1423400

Job DescriptionJob DescriptionA Telecommunications Level III Technician is responsible for the installation, maintenance, and testing of complex telecommunications equipment in Central Office, Data Center, and other network environments. This role requires a strong understanding of telecommunications installation standards, including Telcordia GR-1275-CORE, and carrier-specific guidelines. The Lead Installer oversees the work of junior installers and acts as a key point of contact for project stakeholders. This role is also crucial in the professional, safe & efficient decommission of telecommunications infrastructure which includes dismantling and removal of outdated or obsolete telecommunications infrastructure. As a Telecommunications Level III Technician you will lead and work as a part of a team, supervising and mentoring technicians in all phases of the process. From site preparation, installing, dismantling, material handling and site restoration. The role requires leadership, professionalism, effective communication, physical stamina, attention to detail, and a commitment to following safety protocols to ensure safe and successful project completion. Job DetailsLevel III TechnicianContractor, Full TimePay: $30.00 - $45.00 per hour (dependent upon assessed skill)Schedule:· 8-hour shift Monday – Friday· 10-hour shift Monday – Thursday · Night Shifts (based upon the needs of a project, when required)· Dependent upon the needs of the job/projectWork Location(s):· Tri State Area· State of New York· Lower 48 StatesRequirements:· Must be able to work in the United States for any employer· Must be fluent in English· Ability to be in a rotation for work travel in the lower 48 States from 1-4 weeks at a time. • Possess a valid driver’s license with a satisfactory record Required Skills, • Experience: A minimum of 3 years of digital infrastructure experience with expert-level proficiency in telecommunications equipment installation is required. Experience in ISP/Central Office/Headend/Data Center network facilities is strongly preferred, • Perform and oversee the physical placement, removal, and modification of working and non-working telecommunications equipment. This includes fiber and transport equipment, DC power systems, grounding, cable trays & cable management, iron work, ladder rack, data cabinets, data racks, servers, switches, and routers, • Proficiency in all Level I & II Technician tasks and the ability to work with no supervision on passive systems, • Ability to lead, train and mentor Level I & II installers on installation & decommission projects, • Identify, label, measure, terminate, and route cables for AC/DC power or data transmission, ensuring compliance with specifications and industry best practices, • Produce, read and interpret detailed specifications, drawings, and Method of Procedures (MOPs). Perform quality validation and complete required documentation. Resolve documentation discrepancies and ensure quality inspections are completed, • Adhere to and enforce safety policies, including OSHA regulations, and supervise overall safety, • Serve as a key point of contact for customers, engineers, and project managers, providing updates and resolving issues, • Manage inventory and staging of equipment and materials, • Installation and dressing of CAT5/6 and fiber network cabling, • Performing basic network cable testing and DC power installation, • Adding/removing cabling on non-working & working equipment, • Supporting network testing and fiber prep work in network facilities· Skill in utilizing test equipment for troubleshooting is required, • Strong problem-solving abilities and attention to detail, • Physical Strength & Stamina: ability to lift heavy objects (up to 50 pounds frequently), stand for extended periods, climb ladders, and work, • Mechanical Aptitude & Manual Dexterity: Familiarity with and ability to use various hand tools, power tools, and basic construction equipment safely and efficiently, • Dependability: Reliability, punctuality, and a strong work ethic to consistently complete tasks as assigned and contribute effectively to the team's goals, • Teamwork and Communication: Collaborate effectively with team members, follow instructions from supervisors, and communicate clearly to ensure efficient and coordinated work execution, • Problem-Solving: a primary responsibility for a Level III Technician, recognizing problems and assisting technicians in finding solutions is valuableResponsibilities & ExpectationsYou will be responsible and expected to perform the following:, • Material Handling: You will be involved in loading, unloading, and transporting various types of materials, tools and equipment of various types and weights for installing and decommissioning., • Site Preparation: Safely secure and prepare work sites for installation & decommissioning activities, including setting up safety signage, barriers, and traffic control measures as needed., • Installation & Decommission Assistance: Assist, with minimal supervision or independently, in the systematic installation & decommissioning of telecommunications equipment to include:, • Cabling, including copper, fiber optic and coaxial cables., • Installing & removing equipment from equipment cabinets & racks, co-locations, & data centers., • Installing & removing network infrastructure, including routers, servers, patch panels and other associated hardware., • Maintain a clean and organized work area at job sites and in telecommunications facilities., • Equipment Operation: Utilize and operate a variety of hand and power tools, and potentially heavy machinery, to assist with installations, demolition, material handling, and equipment removal., • Site Restoration: Participate in the cleanup and restoration of work areas after installations & decommissioning, including filling and tamping holes and ensuring proper disposal of waste and debris., • Working at Heights: For some aspects of installations & decommissions, you will need to climb ladders or use different types of lifts., • Understanding Procedures & Processes: You will be expected to consume knowledge of established installation & decommissioning techniques for various types of projects., • Continuous Learning: The telecommunications industry is constantly evolving, so a willingness to learn new technologies, techniques and being technically proficient is beneficial for career growth., • Work Environment: May be exposed to varying environmentsDesired skills and qualifications, • Electrician Experience: Prior work or certification as a skilled electrician who has designed, installed, maintained and repaired electrical systems and equipment is beneficial., • Prior Decommissioning Experience: Experience in telecommunications installations & decommissioning is beneficial., • Certifications: Certifications in safety training, such as OSHA, or specialized equipment operation is advantageous., • Associate's degree, bachelor’s and any continuing education are a plus

Job Description High Rise Fire and Security, founded in 1992, is a leading fire alarm, life safety and security systems solutions provider. We provide a broad range of fire alarm, life safety, security products and services including, but not limited to, the design, installation, service and maintenance of fire alarm, Auxiliary Radio Communication Systems (ARCS), card access, camera surveillance and intrusion systems. High Rise is a member of the SCUTUM Group. SCUTUM, founded in 1989, is a fast-growing, privately owned, leading European life safety company with offices in France, Germany, United Kingdom, Belgium, the Netherlands and Luxembourg. SCUTUM complements our solutions with additional products, services and expertise in electronic, cyber and defense security with an Artificial Intelligence (AI) platform. At High Rise, we pride ourselves on our ability to maintain thorough and up-to-date industry knowledge as well as provide expertise in local code requirements. Our employees are equipped with comprehensive knowledge and extensive experience in providing life safety system solutions throughout New York City Metro Area. We are currently looking for an Associate Programmer to provide exceptional preventive and maintenance service for the organization’s clients, while providing exceptional client customer service, helping to achieve the company’s vision, mission and culture. With a solid reputation in the market, ever so growing client base, cutting edge products and services, now is a great time to join our team. We are currently looking for a Fire Alarm Technician -Tester & Inspector with 1 year of technical experience in who can conduct visual inspection for wear and tear on all fire alarm devices to include fire alarm control panel, batteries, data gathering panel (DGPs), notification appliances, initiating devices, and remote annunciators, conduct test and response on all applicable fire alarm devices, conduct mechanical testing on all applicable fire alarm devices as per NYC, NFPA, and HRFS requirements. Minimum requirements: • High School Diploma or GED equivalent / Some Trade School / 6 months to 2 years trade school certification, • 1-2 years relevant Fire Alarm or other technical work experience Qualifications: • Knowledge of fire alarm systems and operation, • Understanding and application of NYC Building codes and NFPA fire alarm codes, • Knowledge of fire alarm products, EST products preferred, • Proper use of hand tools (meter, toner, etc.), • Understanding of basic electronics theories and principles (Ohm’s Law, AC/DC, etc.), • Ability to demonstrate the safe use of ladders, scaffolding, lifts, and related equipment required, • Acceptable report writing procedures, • Good verbal and written communication skills, • Understanding of all company policies and procedures Benefits: High Rise offers a highly competitive compensation and a generous benefits package, including medical, dental, vision, prescription plans for employees and their families, company paid life insurance, 401k/Profit Sharing contributions. High Rise offers variety of exciting career development opportunities within the organization. We have a robust learning and development platform that provides training and mentoring to employees at all levels of the organization. Employees are offered the opportunity to take part in a range of internal training initiatives to hone their existing skills and continue to grow professionally in accordance with the changing external environment. In addition, our peer-to-peer coaching program and emphasis on dynamic information exchange between teams ensures that our people are challenged intellectually and given the opportunity to succeed in their role. Our organization is dynamic, and we pride ourselves on providing a collaborative work environment where employees are consistently engaged and work together to provide top quality service. Come explore the possibilities at High Rise.

Job Description Absolute Lock and Security in Newhall, CA is searching for a commercial Sub-Contractor Locksmith Technician to work in New York, NY. This is a contract position, which will include locksmith-related skills, low-voltage electrical work, problem-solving, and other simple carpentry. We pay our Sub-Contractor Locksmith Technician a competitive pay rate per job completed. Duties & Responsibilities: Provide locksmith services for commercial locations. Provide recommendations regarding industry best practices for locking devices and hardware applications and installations. Maintain a basic inventory of spare parts and components for supported devices. Install, repair, and re-key cylinders; evaluate and repair door locks; fabricate and provide maintenance in a timely manner. Qualifications: Must have and maintain a current State Locksmith documentation (when needed) and be proficient in all aspects of locksmith services including installation, operation, maintenance, troubleshooting, and repair of locks currently installed. Ability to Re-key and repair desks and file cabinets. Must be able to cut keys by code. Experienced with commercial panic/exit hardware. Experienced with Low Voltage work preferred. Experience with door closers. Must possess excellent troubleshooting skills. Must be able to work with little supervision, and be able to drive to job locations quickly and efficiently. Job Posted by ApplicantPro

Job Description Job Description: We are searching for a building automation control technician who is responsible for installing, commissioning, and programming building automation systems and components. This role includes evaluating the performance of building controls and HVAC systems, ensuring meticulous documentation, and managing DDC control start-up tasks. The position also involves collaborating with clients and electrical installers to ensure seamless system integration. This opportunity is open to Apprentice Level 1, Intermediate, and Expert-level technicians. If you are a Controls Technician with installation and construction experience in building automation systems, you are encouraged to apply to this ad for consideration. We look forward to reviewing your experience and speaking with you soon. Key Responsibilities: • Conduct installation and commissioning activities, including control system setup, network configuration, and equipment integration, • Program and configure DDC controls and building automation systems, • Collaborate with project managers and installation teams to complete projects on time and within budget, • Troubleshoot and resolve installation issues related to DDC control and mechanical systems, • Ensure all installation activities are performed according to project specifications and industry standards involving Building Automation Controls installation and service, • Maintain thorough and accurate documentation of installation processes and project progress, • Communicate regularly with the team (supervisor, project coordinator, account managers) and clients, • Comprehensive understanding of HVAC DDC Control Theory & Applications, • Proficiency in Alerton programming, • Proficiency or certifications in Alerton, Distech, Siemens, JCI Metasys, or Tridium are highly sought after, • Familiarity with electronics and basic electrical circuits, • Exceptional troubleshooting capabilities, • Proficiency in computer hardware and software, • Ability to work autonomously without constant supervision, • Effective communication and interpersonal skills, • AA degree in applied technology (preferred)., • Alerton, Distech, Siemens, JCI Metasys, or Tridium certifications are highly preferred, • Alternatively, a combination of relevant education and experience, • Prior experience with HVAC and/or mechanical systems in building automation systems, • Computer programming experience is a plus, • Competitive pay of $80k - $120k, dependent on experience and certifications, • Company vehicle, • Medical + Dental + Vision, • 401K + company match Joining our team means becoming part of an Employee Stock Ownership Plan (ESOP) company. If you're unfamiliar with an ESOP, you're not alone fewer than 7,000 companies in the US offer this unique benefit. Working for an ESOP is a life-changing opportunity because our benefits extend to every single employee-owner. This means that when you contribute to our success and go the extra mile to satisfy our customers, you directly share in the growth and prosperity of the company. Our ESOP empowers you to take pride in your work and enjoy the financial rewards of our collective achievements.

Job DescriptionSalary: $52,000 - $75,000 New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Security Systems (CCTV / Access Control) Install Technician that embodies POM core values to join our Company. About You You are skilled and innovative in your field. You are a team player that works effectively in high pressure situations, driven to stay on schedule and complete a project on time. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled more than 2,000 site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Roles & Responsibilities: Provide security system installation and support services to Project Managers to ensure the timely delivery of scope of work. • Perform Service and Installation of Access Control, Alarm, CCTV & Intercom systems., • Evaluate, diagnose, troubleshoot and perform repairs as necessary on security systems., • Perform upgrades and additions to systems in order to increase functionality utilization., • Perform computer program entry as required to add CCTV cameras, access control and intrusion alarm systems as needed., • Prepare site documentation for the purpose of providing written support in compliance with regulations and/or conveying information., • Program and Configure Head-end control panels and systems, • Direct field technicians in installation of cabling and device set up and wiring, • Dress, terminate and test cables and components, • Deliver effective commissioning of security systems to satisfy all quality requirements and aid in support of handoff to the Security Service team. Desired Skills and Experience • Experience in installing, programming, training in Electronic Security Systems,i.e. Access Control, Alarm, CCTV and Intercom systems., • Willingness and ability to work flexibly and diligently as befits an important role within a fast growing division., • Ability to work with power tools and ladders., • Ability to complete tasks according to schedule and communicate with supervisors., • Knowledge of building construction, ability to read/understand floor plans and riser drawings., • Strong communication, customer service skills and neat personal appearance., • High level of self-motivation and an ability to work with a high level of initiative., • Strong team player who can communicate effectively., • Ability to work with minimal supervision and work effectively in high pressure situations. Does this sound like you? Benefits Include: • Annual salary commensurate with experience., • Health, Dental, and Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401k plan with matching contribution, • Generous paid-time-off policy, • Pre-tax Commuter Benefit, • Candidates must be authorized to work in the US. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionReports To: Field Operations Manager Classification: Exempt Department: Field Operations Position Type: Full-Time At SmartChoice, we’re reshaping the way businesses communicate, connecting them with innovative solutions through our SMART Network. As a trusted Voice Carrier, Internet Service Provider, Microsoft Teams Partner, and Service Expert, we help companies nationwide achieve new levels of performance with our tailored and cutting-edge technology. We're passionate about delivering exceptional white-glove service, and our team is key to keeping businesses moving forward.Why Join Us? At SmartChoice, we believe that greatness is achieved through collaboration, creativity, and a relentless commitment to white glove service and customer success. We don’t just sell products—we build partnerships and create lasting impacts for businesses across the country. As a leading provider of advanced voice, internet, and communications solutions, we empower our clients with the tools they need to thrive in today’s fast-paced, tech-driven world. At SmartChoice, we believe our people are the heart of what we do, and we pride ourselves on fostering a dynamic and inclusive work environment where everyone’s voice is heard. Our culture thrives on creativity, collaboration, and celebrating successes—big and small. As part of our team, you'll be joining a company that values innovation, teamwork, community engagement, and professional growth. Whether it's through professional development, team-building events, or mentorship opportunities, we ensure that our employees feel supported and empowered to achieve their goals. If you're driven, passionate, and ready to make an impact, we want you to be part of our journey. Position Overview: The Field Engineer will be responsible for the installation of phone, internet, television, and security services at various client sites. A Field Engineer plays a pivotal role in supporting SC’s continued track record of driving efficient operations, while offering a ‘white glove’ level of service. Supervisory Responsibilities: • N/ADuties/Responsibilities:, • Performing on all on-site activites related to installations, including site surveys, repairs, management, and maintenance., • Tracking and documenting the progression of work plan., • Deploying and troubleshooting wired and wireless networks., • Deploying and troubleshooting security systems., • Building relationships and fostering trust with customers and clients., • Perform and document site survey with documentation, diagrams, and photos., • Making recommendations for improvements regarding infrastructure., • Performing customer support tasks., • Adhering to company rules and regulations., • Operating company vehicles in a safe manner., • Various other duties as assigned by management.Education and Experience:, • Previous experience as a field engineer/field technician highly preferred, • LAN Knowledge, Networking Knowledge, Network Design and Implementation, Network Troubleshooting, Network Hardware Configuration, • Understanding of basic networking protocols and fundamentals, • Cisco Routers, Cisco Switches, Cisco IOS, Layer 2, Layer 3, WLAN, LAN and WAN, • A valid driver’s license and clean motor vehicle record., • Experience with Category 5 and 6 cables, • Vast knowledge on punch-downs, • Knowledge on copper and fiber terminations, • Experience using LC and SC connectors, • An expert on fluke network fiber optic tools, • Knowledge on security systems, • Experience with HDMI, • Experience in using the 'Rack and Stack' system and configuring installations effectively, • Experience using VisioRequired Skills/Abilities:, • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Ability to function well in a high-paced and at times stressful environment., • Proficient with Microsoft Office Suite or related software.Physical Requirements:, • Must be able to travel locally on a daily basis to various customer sites., • Must be able to travel overnight to out of state locations as required., • Requires frequent kneeling and bending and considerable use of hands and tools. Walking great lengths at a time., • Frequently requires moving or lifting of up to 50 pounds and able to lift 75 pounds on occasion., • Exposure to live electrical circuits., • Exposure to extreme environmental conditions., • Able to work in confined spaces.Perks:, • Competitive salary with performance-based incentives, • Comprehensive health benefits (medical, dental, vision, life insurance), • Generous paid time off, • Employer-matched 401(k), • Monthly cell phone stipend, • Employee Assistance Program, • Generous PTOWhat We Offer:, • Culture of Innovation: You’ll be part of a forward-thinking team that’s driving the future of business communications., • Growth Opportunities: As SmartChoice continues to expand, so do the opportunities for our team members to take on new challenges., • Fun & Collaborative Environment: We’re serious about our work, but we also know how to have a good time. From team-building events to spontaneous brainstorming sessions, SmartChoice is a place where your voice will be heard, and your efforts will be recognized.Pay range for New York area is $32.00/hr to $37.00/hr, depending upon experience. At SmartChoice, we embrace a work culture that champions teamwork, creativity, and fun while striving for excellence in everything we do. We believe that when passionate individuals come together, great things happen. If you’re looking to contribute to a growing company that is shaping the future of business communication, we want you on our team. Apply now and start making your mark at SmartChoice! SmartChoice provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated. Powered by JazzHR 3kDzxFDDSR

Job Description High Rise Fire and Security, founded in 1992, is a leading fire alarm, life safety and security systems solutions provider. We provide a broad range of fire alarm, life safety, security products and services including, but not limited to, the design, installation, service and maintenance of fire alarm, Auxiliary Radio Communication Systems (ARCS), card access, camera surveillance and intrusion systems. High Rise is a member of the SCUTUM Group. SCUTUM, founded in 1989, is a fast-growing, privately owned, leading European life safety company with offices in France, Germany, United Kingdom, Belgium, the Netherlands and Luxembourg. SCUTUM complements our solutions with additional products, services and expertise in electronic, cyber and defense security with an Artificial Intelligence (AI) platform. At High Rise, we pride ourselves on our ability to maintain thorough and up-to-date industry knowledge as well as provide expertise in local code requirements. Our employees are equipped with comprehensive knowledge and extensive experience in providing life safety system solutions throughout New York City Metro Area. We are currently looking for an Associate Programmer to provide exceptional preventive and maintenance service for the organization’s clients, while providing exceptional client customer service, helping to achieve the company’s vision, mission and culture. With a solid reputation in the market, ever so growing client base, cutting edge products and services, now is a great time to join our team. We are currently looking for a Fire Alarm Technician, specializing in troubleshooting with two years of EST Panel experience and can perform the duties and responsibilities of an equivalent level Tester and Inspector as needed, respond to service requests, read and understand system status on Fire Alarm Control Panel (condition, address, device), conduct diagnostic tests to determine cause of alarm and/or trouble system status, as well as ground faults, make requisition required parts when necessary to repair problem, adjust, replace, or repair defective device(s) to meet NYC, NFPA, and HRFS requirements, conduct testing on all repaired devices, identify code issues and non-conformance issues, and make recommendations on alternative solutions to client/office, and perform minor programming repairs as needed and directed by Field Service Managers. Minimum requirements: • High School Diploma or GED equivalent / Some Trade School / 6 months to 2 years trade school certification and, • 4 years of fire alarm technician experience, • Perform the duties and responsibilities of a Fire Alarm Technician as needed, • Respond to service requests, • Read and understand system status on Fire Alarm Control Panel (condition, address, device), • Conduct diagnostic tests to determine cause of alarm and/or trouble system status, as well as ground faults, • Requisition required parts when necessary to repair problem, • Adjust, replace, or repair defective device(s) to meet NYC, NFPA, and HRFS requirements, • Conduct testing on all repaired devices as per NYC, NFPA, and HRFS requirements, • Identify code issues and non-conformance issues, and make recommendations on alternative solutions to client/office, • Perform minor programming repairs as needed and directed by Field Service Managers, • Elevate status of service call to Programming Unit as required, • Maintain accurate records of all work performed and materials used, • Generate system status reports upon completion of troubleshooting work High Rise offers a highly competitive compensation and a generous benefits package, including medical, dental, vision, prescription plans for employees and their families, company paid life insurance, 401k/Profit Sharing contributions. High Rise offers variety of exciting career development opportunities within the organization. We have a robust learning and development platform that provides training and mentoring to employees at all levels of the organization. Employees are offered the opportunity to take part in a range of internal training initiatives to hone their existing skills and continue to grow professionally in accordance with the changing external environment. In addition, our peer-to-peer coaching program and emphasis on dynamic information exchange between teams ensures that our people are challenged intellectually and given the opportunity to succeed in their role. Our organization is dynamic, and we pride ourselves on providing a collaborative work environment where employees are consistently engaged and work together to provide top quality service. Come explore the possibilities at High Rise.

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: The Position Apartment Maintenance Superintendent - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks and will also live on the property and be responsible for the repairs, upkeep and maintenance of the property and the apartments. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Candidate required to live on property with apartment as part of compensation. Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description Seeking a technician with experience installing cameras, DVRs, NVRs, Intercom and Access Control Systems. Must be able to install, terminate and test low-voltage telecom cable at both patch panels and outlets. Able to troubleshoot and resolve problems efficiently. Must be able to climb ladders. Conduit installation including bending is a plus. PROFESSIONAL AND WELL MANNERED IS A MUST. Drivers license preferred and own vehicle optional. We install, integrate and maintain: Building Security Systems (Cameras, DVRs, Access Control Systems, Intercoms and accessories) Audio Visual Systems, Projectors, Conference and Intercom Systems Structured Cabling Service (Data, Audio, Video) Must be able to pass a background check

Job DescriptionDescription: Tillman FiberCo is dedicated to building a 100% fiber network to power the next generation of broadband services. As part of Tillman Global Holdings, Tillman FiberCo leverages top-tier infrastructure resources to deliver high-speed, reliable connectivity. We are seeking an experienced Fiber Technician to join our Installation & Maintenance (I&M) team, supporting fiber optic installation, maintenance, and repair services. Position Overview The Fiber Technician is responsible for installing, testing, troubleshooting, and maintaining fiber optic network services. This role involves working both independently and with I&M teams to ensure high-quality fiber deployments while adhering to company standards and safety regulations. The ideal candidate has hands-on experience with fiber optic installations, strong problem-solving skills, and a commitment to delivering exceptional service. Location This role supports the East Coast of Florida from Daytona to Miami; centrally located candidate highly preferred. Responsibilities: • Install, splice, test, and repair fiber optic cables for residential and commercial customers., • Diagnose and resolve fiber optic issues, perform OTDR testing, and conduct signal loss analysis to ensure optimal performance., • Interact with customers during installations and service calls, ensuring a smooth experience and addressing technical inquiries., • Adhere to all OSHA and company safety standards while working in the field, including proper handling of fiber optic cables and equipment., • Conduct routine maintenance checks and preventive measures to ensure network reliability., • Maintain detailed records of installations, service calls, test results, and inventory usage., • Work closely with I&M vendors, Network Operations, and Engineering teams to coordinate service requests and resolve issues efficiently., • Utilize specialized tools such as fiber splicing machines, OTDRs, and power meters to complete fiber installations and repairs., • Ensure contractor-installed fiber meets company standards, splicing guidelines, and safety protocols., • Identify deficiencies, document corrective actions, and ensure resolution., • Conduct spot checks, maintain QC reports, and provide feedback to contractors and management., • High School Diploma or GED required., • 2+ years in fiber optics installation, telecom, cable, or related technical field., • Experience with fiber splicing, OTDR testing, and fiber optic troubleshooting. Familiarity with Wi-Fi access points (Nokia preferred) is a plus., • Ability to diagnose fiber network issues and implement effective solutions., • Ability to work in various weather conditions, climb ladders, lift up to 50 lbs, and perform work at heights or in confined spaces., • Proficiency with Microsoft Office Suite and ability to use field service management software., • Must be comfortable working in the field daily, performing hands-on technical work, and ensuring quality standards are met., • Must be willing to travel within Florida as needed and work variable schedules when required., • Must be able to work nights and weekends, variable schedule(s) and overtime as necessary., • Strong communication and customer service skills., • Challenging, rewarding career within a growing company, backed by a global investor and owner of digital infrastructure assets., • Competitive Salary, • East Coast based company (will work on EST time), • Direct Hire Opportunity, • Collaborative environment, with on-the-job training and mentorship opportunities, • Competitive benefits and wellness package, including medical, dental and vision coverage., • 401k plan with company match, • Generous PTO and 11 holidays annually, • Paid parental leave., • Employee Recognition Program

Job DescriptionCompany: Probo Medical Job Title: Mechanical Installation Service Technician Location: Newark, NJ + travel Probo Medical is a diagnostic imaging sales and service provider that delivers high-quality, affordable healthcare products and services to medical practices around the world. With locations that span across the US, Canada, the UK, and parts of Europe, we’ve made it our mission to increase access to life-saving healthcare services for patients worldwide. We empower our teams to solve problems together and build long-lasting relationships with our customers. Establish your purpose-driven career as a Mechanical Installation Service Technician with Probo Medical. You won’t find a more dedicated team of industry professionals to work and grow with. What You’ll Be Doing Mechanical Installation Service Technician work activities may include the coordination and installation, de-installation, relocation, and/or service upgrades of high-value complex equipment in hospitals, universities, and Federal Buildings. Various equipment from each modality may include, but is not limited to, X-ray, CT, MRI, Cardiovascular, and NucMed, and other related technical systems associated with these modalities. Travel Requirements Up to 100% travel throughout the U.S. Frequent travel by car to project sites within 1-2 hours’ driving distance from a project site is required. Overnight travel and air travel to project sites within the assigned territory may be scheduled as business needs require. Pay Range: Typical starting pay is $22-$24 per hour. This range may vary and is based on several factors, including but not limited to geographic location, work experience, education, certifications, etc. Overtime is available. Essential Duties and Responsibilities: • Represent Probo Medical and the customer professionally and courteously while building and maintaining customer relationships., • Become knowledgeable in high-value, complex biomedical equipment., • Follow all Standard Operating Procedures and policies, customer requirements, and statutory and regulatory guidelines., • Assist the Team Leader with coordinating suppliers and help direct on-site deliveries of equipment., • Perform and deliver a safe and timely installation to the customer., • Assist the Team Leader with quality and compliance, customer requirements, and ISO 9001. Ensure each process is followed by each team member., • Maintain the integrity of confidential information. We welcome candidates with electro-mechanical knowledge, mechanical troubleshooting skills, and power tool experience, and those with 1-2 years of related education and experience who are seeking to grow their skills. New graduates are welcome to apply. We train those who are eager to learn! Additionally, we seek: • An associate's degree (A. A.) or equivalent from a two-year university or technical school is preferred., • A high level of patience, attention to detail, and adaptability., • Self-starter able to work as a team and independently without much oversight., • Ability to prioritize assignments and effectively communicate timelines and workload., • Solid communication and interpersonal skills. Must be able to read, write, and speak English fluently., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Knowledge of how to compute rate, ratio, and percentage, and draw and interpret bar graphs., • Ability to add, subtract, multiply, and divide in all Metric and Standard units of measure and use leveling methods to complete related work activities., • MS Office proficiency (Word, Excel, Outlook)., • The use of both hands and fingers with dexterity., • Great hand/eye coordination and ability to work on a ladder., • Must be able to lift up to 75 lbs. of cables or equipment. Our Total Rewards Offering Probo Medical offers a competitive compensation and benefits package, coupled with excellent career development opportunities and a challenging and team-oriented work environment to help you succeed in your career. Visit us at probomedical.com to learn more. If you have a passion for hands-on work, solid mechanical problem-solving and troubleshooting skills, and enjoy being part of a high-growth company that strives for excellence and making a difference in people’s lives, we would like to meet you! Apply Today! We Make it Easy Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees. As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce. We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter. Powered by JazzHR VQ55AF6NsE

Job Description Job Title: Shop Technician Location: Carlstadt- New Jersey Job Type: Full-Time Salary Range: $25-$35 hour (DOE) About Sonsray: Sonsray moves mountains for the construction, transportation, and agriculture industries. We are the West Coast's largest Thermo King & CASE dealership, offering sales, parts, service, rental, and leasing. We are committed to fostering a supportive and dynamic work environment. Why work here? At Sonsray, we value all employees, their contributions, and most importantly, their ideas! We know that the key to moving mountains is teamwork. This is what we offer our team members: • Medical coverage (PPO + HSA options), • Dental, Vision, and Life insurance provided at no cost, • 401K with competitive employer contributions, • 80 hours of annual vacation, increasing with years of service, • Uniforms provided annually, • Annual boot voucher of $125.00, • One full paid day off annually for community volunteer work, • Birthday meal provided by Sonsray, • Privately owned and operated, with decisions made based on core values rather than corporate directives, • Annual Holiday Party, including covered airfare and hotel for employees and a guest, • Emphasis on company growth and employee development Responsibilities: * Diagnosis & Repair: • Troubleshoot, diagnose, and repair components of truck, trailer, V-series refrigeration units, gensets, and APUs., • Identify and repair failures, including removing, replacing, and testing components with a multi-meter., • Address freon leaks, which involves assembling, installing parts, soldering, and utilizing specialized refrigeration equipment. Maintenance & Installation: • Perform preventive maintenance, component replacement, and service of refrigeration equipment., • Maintain transport refrigeration systems on trucks, trailers, APUs, V-series units, gensets, and buses using scanners, electronic test equipment, and onboard computers for diagnostics., • Install new Thermo King units on trailers, trucks, V-series units, and APUs as required. Documentation & Communication: • Maintain accurate records of transport refrigeration unit services on trucks, trailers, APUs, and gensets by reviewing shop orders and preparing estimates., • Document the details of repairs needed or completed. General Duties: * Perform other duties and functions as directed by management to support the dealership's objectives. Qualifications: • 3+ years’ experience diagnosing and repairing Thermo King, Carrier, APUs, gensets, and V-series units., • Skilled in using diagnostic tools, scanners, and multi-meters., • Knowledge of freon systems, leak detection, soldering, and refrigeration component replacement. Able to perform preventative maintenance, installations, and accurate repair documentation., • Ability to lift up to 75 lbs and work in shop/outdoor conditions.

Job Description Position Overview TDS seeks a motivated and organized professional to join our Data Center Solutions team. This is an ideal opportunity for someone with 1 to 3 years of data center technician experience. Candidates must have some data center support experience including hands-on cabling infrastructure and data center equipment installation experience. This opportunity is in the Brooklyn, NY. Candidates must be familiar with patching schedules, relevant project documentation and typical hardware install, move, add, change (IMAC) events that take place in a data center. Responsibilities • Work under the direction of Data Center Operations Manager, to provide on-site support to maintain a data center and its hardware including day-to-day moves and other IMAC work:, • Perform hands-on rack and stack of data center equipment and structured cabling installation, • Cabling current and new setups including copper patching and fiber patching, • Terminate cables in the data center, patch cords and cross-connects, as well as troubleshoot and repair cabling and infrastructure problems as needed, • Install new hardware such as switches, servers, storage devices, firewalls and routers, • Diagnose and repair server hardware (in conjunction with the IT Services Desk Team), • Help monitor the data center environment including power usage, rack capacity, network ports and climate, • Pro-actively check the hardware alerts and single points of failure to ensure the date center is running optimally, • Decommission old hardware: un-cable, remove from racks, and organize ecological disposal, • Escort and assist 3rd party installers and adhere to established security policies, • Manage hardware inventory and maintain a supply of spare equipment to ensure a rapid resolution for hardware repairs, • Install and troubleshoot prefabricated fiber infrastructure, • Update rack documentation and maintain accurate data center documentation including assisting with other team related administrative or operational tasks as needed, • Interact and build an effective rapport with clients, • 1 to 3 years of relevant Data Center Operations, Data Center Technician or Data Center Hardware Support is required, • Excellent interpersonal, communication (both written and verbal), organizational, presentation and collaboration skills are essential, • Knowledge of low-voltage cabling infrastructure standards including Category 6 cabling, Category 6A cabling, OM3 fiber, OM4 fiber and single-mode fiber, • At least one year of hands-on server and network gear installation and move experience including performing network patching (copper and fiber cabling) within a data center, • A good understanding data center operations and data center facilities, • Basic understanding of all data center functions (production operations, network, server, storage, database, change control, disaster recovery/business recovery, help desk, systems management and facilities) is desired, • Candidates must be familiar with patching schedules, relevant project documentation and typical hardware install, move, add, change (IMAC) events that take place in a data center., • Good working knowledge of Microsoft Office, especially Excel, is preferred, • Strong time-management and follow-up skills are necessary For more details, visit . Job Type: Full-time Pay: $55,000.00 - $70,000.00 per year Benefits: • Health insurance, • 10 hour shift, • Night Shift (Preferred), • Overnight Shift (Preferred) Ability to Commute: PM25

Job DescriptionPosition Overview We are seeking a highly skilled and experienced Lead Technician to join our commercial foodservice equipment service team (Hot and Cold Side). The Lead Technician will oversee technical operations in the field, ensure high-quality service delivery, provide mentorship to junior technicians, and serve as the primary point of contact for complex service calls. This role requires strong technical expertise, leadership ability, and a commitment to exceptional customer service. Must be able to travel between Long Island, NYC, NJ, Westchester and Rockland County. Key Responsibilities • Technical Service & Repair, • Diagnose, troubleshoot, and repair a wide range of commercial foodservice equipment, including ovens, fryers, grills, refrigeration units, dishwashers, steamers, and other cooking appliances., • Perform preventative maintenance and ensure all repairs meet company and manufacturer standards., • Lead on-site installation and start-up of new equipment., • Leadership & Mentorship, • Provide guidance, training, and technical support to field technicians., • Conduct ride-alongs to ensure adherence to quality and safety standards., • Assist with onboarding and skill development for new team members., • Customer Service, • Act as the primary point of contact for high-priority clients and escalated service issues., • Communicate effectively with customers, and management regarding repairs, timelines, and recommendations., • Ensure customer satisfaction by maintaining professionalism and service excellence., • Operational Support, • Coordinate with the service manager to schedule and prioritize jobs., • Maintain accurate service records, parts usage, and work order documentation., • Assist with parts ordering and inventory control for field operations., • Safety & Compliance, • Ensure all work is performed in compliance with OSHA, EPA, and manufacturer guidelines., • Promote a culture of safety among all team members.Qualifications, • Experience: Minimum 5 years in commercial foodservice equipment repair; leadership or supervisory experience preferred., • Technical Skills: Strong knowledge of electrical, gas, plumbing, and refrigeration systems related to commercial kitchen equipment., • Certifications:, • EPA Section 608 Refrigerant Certification (Required), • CFESA Certification (Preferred), • Other Requirements:, • Valid driver’s license with clean driving record, • Ability to lift 50+ lbs and work in various kitchen environments, • Strong problem-solving and decision-making skills, • Excellent communication and interpersonal skillsBenefits, • Competitive salary with performance incentives, • Company vehicle, phone, tablet, some tools and uniforms provided, • Health, dental, and vision insurance, • Paid time off and holidays

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company car, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off, • Training & development We are seeking a highly skilled and experienced Lead Technician to join our commercial foodservice equipment service team (Hot and Cold Side). The Lead Technician will oversee technical operations in the field, ensure high-quality service delivery, provide mentorship to junior technicians, and serve as the primary point of contact for complex service calls. This role requires strong technical expertise, leadership ability, and a commitment to exceptional customer service. Must be able to travel between Long Island, NYC, NJ, Westchester and Rockland County. Key Responsibilities • Technical Service & Repair, • Diagnose, troubleshoot, and repair a wide range of commercial foodservice equipment, including ovens, fryers, grills, refrigeration units, dishwashers, steamers, and other cooking appliances., • Perform preventative maintenance and ensure all repairs meet company and manufacturer standards., • Lead on-site installation and start-up of new equipment., • Leadership & Mentorship, • Provide guidance, training, and technical support to field technicians., • Conduct ride-alongs to ensure adherence to quality and safety standards., • Assist with onboarding and skill development for new team members., • Customer Service, • Act as the primary point of contact for high-priority clients and escalated service issues., • Communicate effectively with customers, and management regarding repairs, timelines, and recommendations., • Ensure customer satisfaction by maintaining professionalism and service excellence., • Operational Support, • Coordinate with the service manager to schedule and prioritize jobs., • Maintain accurate service records, parts usage, and work order documentation., • Assist with parts ordering and inventory control for field operations., • Safety & Compliance, • Ensure all work is performed in compliance with OSHA, EPA, and manufacturer guidelines., • Promote a culture of safety among all team members.Qualifications, • Experience: Minimum 5 years in commercial foodservice equipment repair; leadership or supervisory experience preferred., • Technical Skills: Strong knowledge of electrical, gas, plumbing, and refrigeration systems related to commercial kitchen equipment., • Certifications:, • EPA Section 608 Refrigerant Certification (Required), • CFESA Certification (Preferred), • Other Requirements:, • Valid drivers license with clean driving record, • Ability to lift 50+ lbs and work in various kitchen environments, • Strong problem-solving and decision-making skills, • Excellent communication and interpersonal skillsBenefits, • Competitive salary with performance incentives, • Company vehicle, phone, tablet, some tools and uniforms provided, • Health, dental, and vision insurance, • Paid time off and holidays

Job Description Summary: We are seeking an experienced Fiber Installation & Repair (I&R) Technician to join our team. This role is focused entirely on fiber-to-the-home (FTTH) installations, requiring hands-on expertise in both installation and repair. The ideal candidate will bring proven fiber I&R experience, technical knowledge, and the ability to provide top-notch service to residential customers. Responsibilities: • Perform fiber-to-the-home (FTTH) installations, ensuring proper setup, testing, and verification of services., • Troubleshoot and repair fiber optic lines to restore connectivity and maintain service quality., • Handle fiber splicing, terminations, and testing using industry-standard tools and equipment., • Maintain detailed service records, installation notes, and test results., • Communicate effectively with customers to explain installation procedures, usage, and maintenance., • Proven experience in Fiber Installation & Repair (I&R)., • Experience working on fiber-to-the-home (FTTH) projects., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently with minimal supervision., • Familiarity with ISP standards and residential fiber deployment., • Customer-facing experience with a focus on service excellence. Bold Business is a US-based global business process outsourcing (BPO) firm with over 25 years of experience and $7B+ in client engagements. We help fast-growing companies scale through smart talent strategies, automation, and technology-driven solutions. Bold Business recruiters always use a "@boldbusiness.com" email address and/or from our Applicant Tracking System, Greenhouse. Any variation of this email domain should be considered suspicious. Additionally, Bold Business recruiters and authorized representatives will never request sensitive information in email or via text.

Job Description Job Title: Fire Protection Technician Location: Newark Airport Terminal A Department: Facilities Maintenance Job Summary: The Fire Protection Technician plays a key role within the Facilities Management team to support the Fire Protection Systems within Terminal A. The Facilities Maintenance Fire Protection Technician will maintain fire protection systems and be the first investigator for all fire alarms as well as the primary point of contact for both internal and external customers. You will be part of the Munich Facilities Maintenance department operating at Newark Airport Terminal A twenty-four hours a day, seven days a week, and will work within the facilities maintenance department and our contractors to maintain the terminal. Responsibilities: • Perform monthly, quarterly, semi-annual & annual flow testing of fire protection systems and backflow preventors as per NFPA (see below associated NFPA), and perform onsite emergency troubleshooting and repairs of the Terminal A fire alarm and protection systems, identifying code and non-conformance issues:, • Conducting regular inspections and tests of the fire protection systems to ensure they are functioning correctly and in compliance with NFPA standards. You will also perform emergency troubleshooting and repairs as needed, identifying and addressing any code violations or non-conformance issues., • Act as a first investigator for fire alarms/fire protection systems within Terminal A and operate the fire protection and Fire Alarming systems and software when needed:, • This involves being the initial responder to any fire alarms or issues with the fire protection systems. You will assess the situation, determine the cause of the alarm, and take appropriate action to resolve the issue. This may include operating the fire protection systems and FACP to ensure the safety of the terminal., • Strong problem solving and decision-making abilities and able to work well with other team members and the terminal stakeholders., • Read and interpret blueprints, submittals, and operational/product manuals:, • Ability to understand and interpret technical documents, including blueprints, submittals, and product manuals, to effectively maintain and troubleshoot the fire protection systems., • Ensure that work orders for planned FLS maintenance are in place and stakeholders are informed:, • This involves creating and maintaining schedules for planned maintenance activities, ensuring that all necessary work orders completed, and keep stakeholders informed of the status of maintenance activities and deficiencies., • Monitor the CMMS system (Maximo) to ensure all the FLS work orders are completed on time:, • Overseeing the execution of maintenance work orders, receiving and reviewing reports on completed work, and ensuring that all information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, attended to, and resolved as per SLAs, using the standard work order procedures, • Inform, communicate, and collaborate if there is an event needing other stakeholders’ involvement:, • Requires effective communication and collaboration with other stakeholders when an event or issue requires their involvement., • Monitor and oversee that planned and ad-hoc inspections are taking place:, • Includes ensuring that both scheduled and unscheduled inspections and work are conducted as required to maintain the fire protection systems., • Overseeing the performance of Fire Life Safety subcontractors in carrying out planned maintenance and reactive management activities and coordinating with management to address any issues or concerns., • Monitor all FLS KPIs and SLAs for compliance:, • This involves tracking key performance indicators (KPIs) and service level agreements (SLAs) to ensure compliance with established standards and performance metrics., • Prepare documentation for events for pre and post stakeholder meetings, • Issue shift/daily reports as required:, • This involves preparing and issuing reports on a daily or shift basis to provide updates on maintenance activities, issues, and performance metrics., • Monitor Cerberus Danager Management System & Building Management System(s) status and take appropriate action to address any received faults through management of corrective work order:, • This involves monitoring the status of the Fire Alarm Software & Building Management Systems (BMS, SCADA and taking appropriate action to address any faults or issues that arise, including issuing and managing corrective work orders., • Perform building inspections including facilities maintenance and life safety audits., • Shift work required and will cover other shifts for PTO/vacations, as required:, • This requires flexibility to work different FM positions and shifts as needed, including covering for other team members during paid time off (PTO) or vacations.Qualifications:, • NICET Level II/NICET Level III Certification is preferred., • Familiarity with NFPA Requirements for Fire Protection & Life Safety Systems., • Minimum of 3 years of experience in the testing, inspection, and maintenance of fire sprinklers/clean agent, fire extinguishers, and related equipment., • Back-flow certification is preferred and must be able to obtain S12, S13, and S14 certification within the first six months if you don’t already have it., • Be able to sit, stand, walk, bend, climb stairs for extended periods, and lift at least thirty (30) lbs., • Possess a GED, high school diploma, or equivalent. 1. Fire Alarm & Detection Systems • NFPA 14 – Standard for the Installation of Standpipe and Hose Systems, • NFPA 15 – Standard for Water Spray Fixed Systems for Fire Protection, • NFPA 25 – Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, • NFPA 291 – Standard for Fire Flow Testing and Marking of Hydrants3. Special Fire Suppression Systems, • NFPA 17 – Standard for Dry Chemical Extinguishing Systems, • NFPA 17A – Standard for Wet Chemical Extinguishing Systems (Common in kitchen suppression systems.), • NFPA 30 – Flammable and Combustible Liquids Code (Includes fire protection requirements for liquid storage.), • NFPA 96 – Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations (Covers kitchen hood suppression systems.), • NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems (Covers FM-200, NOVEC 1230, and other gas-based suppression systems.)4. Portable Fire Extinguishers, • NFPA 72 – National Fire Alarm and Signaling Code (Also listed under Fire Alarm Systems.) Powered by JazzHR abh1DYYlpl

Job DescriptionSalary: 40-45/hour DOE ELECTRONIC ENVIRONMENTShas been an A/V industry pioneer and leader for over 35 years. We enjoy making technology fun and convenient for our clients. Electronic Environments offers a fast paced, fun environment where we deliver projects for customized home automation solutions including distributed entertainment systems, lighting controls, motorized shading, HVAC systems, access controls and IT infrastructure. We are currently looking for an experienced Lead Technician in our NYCoffice. Our ideal candidate should possess 5+ years of AV installation and integration experience. Responsibilities for this position include: • Teach, mentor, and guide field technicians and junior technicians to successfully install and commission AV home integration systems., • Act as the subject matter expert and lead installations for AV control systems including but not limited to:, • Wire ring out., • Wire management, trimming, proper wire labeling standards, and termination including: RG6, Fiber, Cat6, Cat6A RJ-45 Compression, Solder, etc., • Lighting Keypads and touch panel installations., • Programing of URC remotes., • TV brackets and other mechanical display support devices., • Physical installation of control system components: racks, TVs, speakers, video walls, projectors, and other equipment., • Document status reports, procedures, and updates to the project within project software. Provide daily updates to project team in applicable platform., • Verify task list from daily punch list at the project site, follow in accordance with project timeline and expectations., • Work alongside other project team members to setup and test AV signal flows, equipment functionality, and programming., • Communicate with project manager and project stakeholders providing any changes required due to construction restraints or other issues that arise., • Professionally interact with external stakeholders including but not limited to general contractors, architects, client staff, and clients. Connect with the project manager on any requests from external stakeholders., • Perform diagnostics, troubleshooting, and testing of systems during installation phases. Report, document, and resolve issues as applicable., • Load programming and train clients in system use with completion of a project., • On-call weekend rotation is required. Job Qualifications • High school diploma or equivalent preferred., • Expert knowledge of:, • Audio & Video distribution concepts and equipment (HDMI, Dante audio), • IR, RS-232, and Network control protocols & communication., • Networking standards including, but not limited to, VPN connections & port forwarding concepts., • Savant, Creston and/or Control4 control systems., • Lutron lighting & shade systems., • HVAC and thermostat functionality., • Comfortable interacting with VIP clientele in a fast-paced environment., • Understanding of product lines including Crestron, Savant, Sonos, Lutron, Snapav, Access Networks, Sonance, Bluebolt, Future Automation, and Seura., • Working knowledge of Crestron Toolbox, Savant, Dyn, DNS, etc., • Ability to lift, move, and push 50 lbs., • Required to stand, walk, climb, sit, and use hands and fingers., • OSHA 40 and applicable SST certification required. (or able to obtain with 6 months of employment), • Valid drivers license preferred. Our company benefits include: * Competitive salary based on experience * Insurance benefits (Medical, Dental, Vision, FSA, Life, AD&D, LTD) * 401(k) retirement plan * Generous PTO policy * Access to employee purchase opportunities * Casual work environment & strong commitment to work/life balance * Continuous training opportunities as well as attendance to industry conferences. C2