Trabajos installation technician en Bay Shore, New YorkCrear alertas

Job DescriptionDescription: To successfully diagnose and remedy any issues associated with residential and commercial grid tied PV systems. Requirements: Essential Duties and Responsibilities: The essential functions include, but are not limited to the following: · Assist lead technician - Troubleshoot and remedy customer concerns related to their PV installation Loading and unloading of equipment into the work trucks · Safely climbing ladders and navigating potentially steep roof planes Mounting of racking, modules and electrical equipment when replacement is needed Electrical wiring of solar array (AC and DC) when needed Leaving job sites clean and orderly · Providing knowledge to customers at time of install · (Other duties as necessary) Skills and Qualifications: · Ability to lift up to 50 lbs unassisted · Willingness to work through both hot and cold weather · Valid driver’s license · Experience in general construction · Ability to safely climb ladders and navigate potentially steep roof planes · 1+ years of experience installing or servicing grid tied PV systems - preferred · Ability to interpret plans and stringing charts. · Knowledge of residential electrical systems · OSHA 10 or better (Can be received after hiring) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Lift/carry materials and tools (up to ~50 lbs); load/unload trucks. · Climb ladders and work safely at heights. · Navigate and work on steep/sloped roofs (balance/footing). · Perform repetitive bending, kneeling, reaching, and overhead work while mounting equipment. · Work outdoors in heat/cold/wind; tolerate dust/noise and wear required PPE. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Notice of AI Use in Job Application Review As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate’s qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Standard Fire Protection, part of the Altus Fire & Life Safety family of companies, is looking for a Kitchen Hood Suppression Systems Technician to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Hourly Rate: $20.00 - $35.00 / hourResponsibilities • Install, inspect, test, service, and maintain kitchen hood fire suppression systems, • Perform work in compliance with FDNY codes, NFPA standards, and company procedures, • Diagnose system issues and complete repairs as needed, • Complete service reports and documentation accurately and on time, • Communicate professionally with clients, supervisors, and team members, • Maintain tools, equipment, and service vehicle in good condition, • Adhere to all safety regulations and OSHA standardsRequired Skills, • Experience: At least 2+ years of hands-on experience with kitchen hood suppression systems, • Licensing/Certifications:, • FDNY Certificate of Fitness S-17 (required), • OSHA 30 certification (required), • Technical Skills:, • Familiarity and experience with Ansul systems, • Preferred Skills:, • Experience working in commercial kitchens or restaurant environments, • Strong troubleshooting and problem-solving skillsHourly Rate: $20.00 - $35.00 / hour

Job DescriptionDescription: Position Summary We are seeking a skilled Reconstruction Technician to join our team. This role involves restoring residential and commercial properties damaged by fire, water, mold, and storms. The ideal candidate will be proficient in basic drywall repairs, minor carpentry, plumbing, and flooring installation, with a strong understanding of building materials and construction techniques. In addition to reconstruction duties, the technician will assist mitigation teams in addressing water, fire, and mold damage. Key Responsibilities • Perform basic drywall repairs, including patching, taping, and applying standard finishes., • Conduct minor carpentry and cabinetry repairs to restore damaged structures., • Execute basic plumbing tasks, such as fixing leaks or replacing fixtures, as needed., • Install and repair flooring materials in affected areas., • Restore properties to pre-loss condition following fire, water, mold, or storm damage (turnkey restoration)., • Assist mitigation technicians with water extraction, fire damage cleanup, and mold remediation efforts., • Ensure all work complies with safety standards and building codes., • Reachable by phone during waiting to be engaged periods, but otherwise free to use your time for personal activities unless contacted to report for duty., • Operate company vehicles, as necessary., • Complete other duties as assigned. Competency/Skills • Proven experience in drywall repair, carpentry, plumbing, and flooring installation., • Strong knowledge of building materials used in residential and commercial properties., • Ability to work in a fast-paced environment and manage multiple tasks., • Comfortable working with structures impacted by fire, water, mold, or storm damage., • Team player with excellent communication and problem-solving skills., • Technical Proficiency – Demonstrated ability to effectively use and adapt to new technologies and digital platforms. Benefits • Medical, • Dental, • Vision, • EAP, • STD/LTD, • Basic Life and AD&D, • Voluntary Life, • Supplemental: Accident, Critical Illness, Hospital Indemnity, • Cell Phone Stipend, • 401(k), • Paid Time Off, • Paid Holidays Watterson is an Equal Employment Opportunity and E-Verify employer. Disclaimer: This job description is intended to outline the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, or competencies. Employees may be directed to perform job-related tasks other than those specifically presented in this description based on business need. Requirements: Experience/Education • 2+ years’ experience in construction/ handyman services, required., • Valid Driver’s license in good standing without restrictions., • Familiarity with mitigation processes for water, fire, and mold damage, preferred., • Certifications such as OSHA, IICRC, etc., preferred. Physical Requirements: • Ability to lift, carry, and move equipment, materials, and debris weighing up to 75 lbs. on a regular basis., • Ability to stand, walk, bend, stoop, kneel, crouch, climb, and perform physical labor for extended periods., • Comfortable working in confined spaces, attics, crawl spaces, and other challenging environments., • Ability to work around water, mold, fire, smoke, and other property damage conditions while wearing required PPE., • Ability to operate mitigation equipment and safely handle tools and materials used in restoration work., • Ability to work indoors and outdoors in varying weather conditions and job-site environments., • Ability to travel to customer locations and respond to emergency service calls as needed. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. Driver’s License Requirement: A valid driver’s license is required because this position regularly operates Company vehicles to travel to assigned job sites and other work locations. Company vehicles are used to transport tools, equipment, materials, and other work-related items necessary to perform and complete assigned service work. Company vehicles may be assigned to and stored at an employee’s residence when off duty to support timely deployment to assigned locations.

Job Description Join Our Expert Team and Advance Your Pool Service Career! Northern Pool Company is seeking a highly skilled Lead Pool Service Technician to join our dynamic team. If you have a passion for delivering high-quality service, leading a team, and working with advanced pool systems, we want to hear from you! Position Summary: As a Lead Pool Service Technician, you will oversee a team performing pool openings/closings, weekly maintenance, troubleshooting, repairs, and upgrades. You will ensure that all work meets our high company standards while delivering exceptional customer service. Key Responsibilities: • Independently perform all pool maintenance, repair, and troubleshooting tasks., • Lead and mentor team members, providing training and feedback., • Ensure company vehicles and tools are organized, neat, and presentable., • Maintain consistent communication with supervisors, office staff, and clients., • Accurately complete all necessary paperwork, job notes, and reports., • Provide professional and knowledgeable recommendations to clients., • Monitor and promote adherence to company core values and policies., • Report any unexpected problems or repairs to supervisors promptly., • Ensure clear and respectful communication with team members and clients., • Attend ongoing training and educational workshops to maintain technical knowledge., • Accurately review and prepare for each day's scheduled work. Advanced Technical Skills Required: • Leak detection diagnosis and repair (pressure testing), • Installation and programming of all major VSP pump manufacturers, • Advanced troubleshooting of automation systems (relays, switches, sensors, remotes), • Identification of various pool builder designs, • Dive-in repairs and in-floor cleaning system maintenance, • Expertise in vanishing edge and complex pool system management, • A-B measuring for new or replacement safety covers, • Skimmer replacements (vinyl and concrete), • Repair of leaking return fittings and pipe systems, • Measuring and replacing vinyl liners, • Plumbing entire equipment pads and pool systems Qualifications: • Minimum 2 years of experience as a Lead Service Technician, • Certified Pool Operator (CPO) Certification required, • Strong leadership, communication, and problem-solving skills, • Highly motivated with strong attention to detail and a customer-first mindset, • Valid driver's license required Physical Requirements: • Ability to lift at least 50 lbs regularly, • Comfortable working outdoors in various weather conditions, • Able to stand, walk, and work on feet for extended periods, • Ability to distinguish colors (for water testing purposes), • Must be able to swim for safety reasons Why Join Northern Pool Company? • Competitive compensation based on experience, • Ongoing training and career development opportunities, • Positive, supportive, and team-oriented work environment, • Work with the latest pool technologies and systems If you're ready to take your pool service career to the next level and lead a team that takes pride in excellence, apply today and join the Northern Pool Company family! Job Type: Full-time

Job DescriptionDescription: The Field Service Technician must have good communication and technical skills to effectively diagnose and solve problems. They must be familiar with a variety of phone systems, network and data equipment and be able to perform a wide range of services, from basic repair to full installations with little or no supervision. They must be team players and have good customer service and project management skills to ensure that the customer’s equipment is configured, programmed, or repaired according to the customer’s needs. Field Service Technicians must also possess good computer and organizational skills. They will also participate in the on-the-job training program and maintain a working knowledge of all equipment. They also need hand and finger dexterity and good eyesight with the ability to determine colors. This position requires daily travel, with some overnight travel possible on occasion. He or she must be available to be on call after normal business hours and perform service, installation and maintenance work during nighttime hours is expected. Requirements: Performs installation, maintenance, and troubleshooting on Key and PABX phone systems Perform installation, maintenance, and troubleshooting on Voicemail and Call Center products Utilizes thorough knowledge and experience, testing, troubleshooting, cutting over, and turning up of phone lines, PRI’s, voice and data T-1’s, Trunks, and integrated circuits Troubleshoot telephone system hardware/software, voicemail, and telephone set and feature issues on site and remotely Install cables and testing Establishes service by studying equipment requirements; researching documentation, ordering and gathering components and parts; completing installation; performing acceptance tests Maintains rapport with customers by discussing issues; providing technical support; identifying solutions; suggesting improved methods and techniques; recommending system improvements. Supports other departments by providing corrective actions to Trouble Tickets, assist the Technical Assistance Center (TAC) as required At customer premises locations identify demarc, pretest and install IAD and loop testing. Assist remote centers with hosted IP-PBX/managed services test and turn up to customer premise Protect confidential information, observe and participate in vehicle and office safety programs Responsible and accountable for maintaining all company equipment to be operational at all times Adhere to scheduled order completion and maintenance time frames. • 3 -5 years of related telecommunications experience, • Basic knowledge of VoIP, networks and data, • Able to read and interpret documents such as safety rules, operation and maintenance instructions and procedure manuals., • Able to write routine reports and correspondence as well as speak effectively to customers or fellow employees when resolving trouble reports., • Must be able to work independently with minimal guidance, while focusing on a sense of urgency for customer impacting issues., • Must be able to sit or stand for extended periods of time, lift up to 50 lbs. and perform other basic physical demands of the position as needed., • SV9500, UM8700 and MA4000 Experience

Job Description Long Island based coffee supplier, looking for a motivated individual who is: 1- An experienced coffee/espresso equipment technician. 2- A trainee for coffee/espresso equipment repair with mechanical skills and understanding of electrical and plumbing to work on coffee related machines and equipment. Our task as a service provider is to inspect, repair, and calibrate coffee and espresso equipment including brewing, grinding and dispensing systems for customers in Nassau and Suffolk counties. Additionally, we support new equipment installation as well as periodic preventive maintenance on existing coffee and espresso equipment. Technicians are expected to maintain customer relationships in assigned territories through on-time service and professional representation. Good written and oral communication skills is a must. Technicians will need to document their work efficiently and properly inform customers of the conducted service. You will be performing field service and in-shop repair work. This includes troubleshooting on-site repair, installation and calibration of equipment, and occasional deliveries, all utilizing a company provided vehicle. We will train you on the specific equipment that will be encountered in the field and all necessary tools will be provided. Elective health benefits and retirement plans are available. This is a full-time position with some overtime required/available. We provide recession proof job security in a time of uncertainty for multiple businesses. Job Type: Full-time Work Location: In-person Hours: · Monday – Friday, 8:00 AM to completion (typically 4:30-5:30 PM) · Occasional weekend and on-call service coverage required Qualifications: Mechanical experience necessary with any of the following: · Coffee equipment/appliances / plumbing / electrical / mechanical / HVAC / boilers or technical career school Requirements: · High school diploma or equivalent · Have electrical/mechanical and trouble-shooting experience · Highly motivated and self-starter · Must be able to work under minimal supervision · Must be able to handle multiple priorities · Must be able to provide a high level of quality customer service · Must be able to lift up to 70 pounds · Strong written and communication skills are helpful · Prior experience repairing and servicing coffee equipment including Bunn, Curtis, & Grindmaster is highly preferred but not necessary · Good people skills · Must have valid and clean driver’s license and own means of getting to work · Knowledge of the Long Island area geographically is a plus · Must be able to read/write/speak English & legally eligible to work · Bilingual is beneficial If you are a team player with hands on experience and are interested in a challenging opportunity with a world class coffee distribution team, this may be the opportunity you’re looking for. Compensation: Salary: $20-$28 per hour (depending on experience) Benefits: · 401(k) · 401(k) matching · Employee discount · Dental insurance · Health insurance · Vision insurance · Paid time off (sick/vacation PTO) · Company-paid vehicle and fuel, cell phone, training and specialty tools E04JI800te7d409h2lb

Job DescriptionDescription What You'll Do:Siding Repair & Installation • Perform residential siding repairs, replacements, and installations., • Work with various siding materials, including vinyl and other common residential siding products., • Diagnose siding damage, moisture intrusion, and installation deficiencies., • Properly install siding panels, trim, corners, and associated components., • Ensure proper fit, alignment, weatherproofing, and finished appearance.Window Repair & Installation, • Independently perform residential window repairs and installations., • Remove and replace existing windows as needed., • Diagnose window leaks, drafts, operational issues, and installation deficiencies., • Install and properly seal windows, flashing, trim, and related components., • Complete adjustments and finish work to ensure proper operation and appearance.Interior Repairs, Spackle & Paint, • Repair drywall damage resulting from leaks, window replacements, or other residential service needs., • Perform drywall patching, spackling, sanding, and surface preparation., • Apply interior paint and touch-ups to achieve a clean, professional finish., • Match existing textures and finishes whenever possible., • Complete trim, caulking, and other minor finish work as needed.General Service & Customer Experience, • Independently assess service needs and determine appropriate repair solutions., • Complete assigned projects with minimal supervision., • Maintain accurate documentation of work performed and materials used., • Communicate professionally with homeowners regarding repairs and project completion., • Maintain a clean, safe, and organized job site., • Follow company safety procedures and quality standards. What We're Looking For: • 5+ years of residential construction, home improvement, or service technician experience preferred., • Proven experience with residential siding repair and installation., • Strong experience with residential window repair and installation., • Hands-on experience with drywall repairs, spackling, sanding, and painting., • Ability to independently troubleshoot and complete repairs across multiple trades., • Strong knowledge of construction tools, materials, and installation techniques., • Excellent attention to detail and pride in workmanship., • Ability to safely work on ladders, at heights, and on residential job sites., • Strong communication and customer service skills., • Dependable, organized, and self-motivated., • Experience working in residential roofing or exterior home improvement., • Knowledge of moisture intrusion, flashing, sealing, and weatherproofing., • Experience completing warranty repairs and homeowner service calls., • Ability to manage multiple repair tasks and prioritize daily assignments. Benefits Offered: • 401(k) with company match., • Health insurance., • Dental insurance., • Vision insurance., • Paid time off., • 8 paid holidays., • Employee referral program., • Employee discount.

Job DescriptionDescription: The Field Service Technician must have good communication and technical skills to effectively diagnose and solve problems. They must be familiar with a variety of phone systems, network and data equipment and be able to perform a wide range of services, from basic repair to full installations with little or no supervision. They must be team players and have good customer service and project management skills to ensure that the customer’s equipment is configured, programmed, or repaired according to the customer’s needs. Field Service Technicians must also possess good computer and organizational skills. They will also participate in the on-the-job training program and maintain a working knowledge of all equipment. They also need hand and finger dexterity and good eyesight with the ability to determine colors. This position requires daily travel, with some overnight travel possible on occasion. He or she must be available to be on call after normal business hours and perform service, installation and maintenance work during nighttime hours is expected. Requirements: Performs installation, maintenance, and troubleshooting on Key and PABX phone systems Perform installation, maintenance, and troubleshooting on Voicemail and Call Center products Utilizes thorough knowledge and experience, testing, troubleshooting, cutting over, and turning up of phone lines, PRI’s, voice and data T-1’s, Trunks, and integrated circuits Troubleshoot telephone system hardware/software, voicemail, and telephone set and feature issues on site and remotely Install cables and testing Establishes service by studying equipment requirements; researching documentation, ordering and gathering components and parts; completing installation; performing acceptance tests Maintains rapport with customers by discussing issues; providing technical support; identifying solutions; suggesting improved methods and techniques; recommending system improvements Supports other departments by providing corrective actions to Trouble Tickets, assist the Technical Assistance Center (TAC) as required At customer premises locations identify demarc, pretest and install IAD and loop testing. Assist remote centers with hosted IP-PBX/managed services test and turn up to customer premise Protect confidential information, observe and participate in vehicle and office safety programs Responsible and accountable for maintaining all company equipment to be operational at all times Adhere to scheduled order completion and maintenance time frames. • 3 -5 years of related telecommunications experience, • Basic knowledge of VoIP, networks and data, • Able to read and interpret documents such as safety rules, operation and maintenance instructions and procedure manuals., • Able to write routine reports and correspondence as well as speak effectively to customers or fellow employees when resolving trouble reports., • Must be able to work independently with minimal guidance, while focusing on a sense of urgency for customer impacting issues., • Must be able to sit or stand for extended periods of time, lift up to 50 lbs. and perform other basic physical demands of the position as needed., • SV9500, UM8700 and MA4000 Experience

Job Description Join a team where craftsmanship matters, your work is valued, and every project transforms a home for the better. One Goal, One Passion – Growth is Everything at Window Nation At Window Nation, we don’t just replace windows and doors – we help transform homes into spaces people love. With nearly 20 years of craftsmanship, innovation, and competitively priced solutions, we’ve enhanced the comfort, safety, and value of homes for customers nationwide. In doing so, we’ve become a trusted leader in home improvement, striving to be the provider of choice for all window and door replacements. As we continue to grow and expand into new markets in 2026, we’re looking for passionate, driven team members who thrive in a high-growth environment. Join a company where your expertise is valued, your contributions matter, and your work makes a lasting impact – on customers and the future of home improvement. We’re seeking a Field Technician who will play a critical role in growing and developing our operational and install processes The field technician goes out to do all service and will help with installations. They must be comfortable with heights and have previous installation experience working with installing windows on non-new construction homes. They must be able to drive the work vehicle and know how to work with difficult customers. This role will work onsite out of our new Deer Park, NY location. Candidates from other surrounding areas are encouraged to apply. What You Will Do: • Visit residential customer sites to measure each window, door, sliding glass door opening as needed, • Ensure order meets required installation specifications; ensure comprehensive purchase order, including material and labor requirements, • Support pricing process by providing accurate measurements and assessments for labor/materials, • Review installation project/process with customers, • Anticipate roadblocks that could impact customer expectations, job costs and/or code performance; recommend solutions, • Execute change order specifications, • Maintain service parts inventory and equipment, • Complete service assessments; identify needed services, materials, and labor to relevant stakeholders, • Fulfill service appointment specifications, • Ability to learn and stay proficient with all Window Nation products, install techniques, and service techniques., • Maintain proficiency to do all tasks of the position., • Maintain a substantive knowledge of product, install techniques, and construction basics, • Maintaining a driving record that meets company’s insurance standards, • Ability to use an extension ladder in a safe manner to measure windows and perform services, • Must be able to pass EPA certification and follow EPA Regulations, • Knowledge of local permit/license/historical/HOA requirementsWhat We Are Looking For:, • Construction/home remodeling, • Must know how to measure windows, • 3-4 years of Measuring experience, • Working on Vinyl/Aluminum/Impact, • Longevity with previous companies What We Offer:, • Competitive pay and performance-based bonus opportunities, • Full benefits package including medical, dental, vision, life, and 401(k) retirement options, • Paid time off, • Growth opportunities within a rapidly expanding company, • A supportive team culture where your contributions matter and craftsmanship is celebrated, • Training to help you succeed from Day One Why Window Nation? At Window Nation, we know that when our people grow, our company grows. From hands-on training and career growth opportunities to a supportive, team-first culture that values craftsmanship, reliability, and collaboration, you'll find a place where your contributions make an impact. Pay Transparency Statement: At Window Nation, compensation is determined on multiple factors, including experience, education, skills, location, and the requirements of the role. For this position, the expected base salary is $33/hour. In addition to base pay, employees are eligible for performance incentives and a comprehensive benefits package. Final compensation will be based on a combination of factors, including the candidate’s relevant experience, qualifications, and internal equity considerations. Window Nation cultivates a culture of inclusion that respects our employees' individual strengths, views, and experiences. We believe our differences make us a better team – one that makes good decisions, drives innovation, and delivers better business results. At this time, Window Nation is unable to provide sponsorship for employment visas now or in the future. Candidates must be authorized to work in the United States on a permanent basis without the need for current or future visa sponsorship. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview IntelliShift Services is seeking a skilled 12 Volt Installation Technician who is passionate about automotive systems and enjoys working with cutting-edge technology. In this role, you will be responsible for the installation of various automotive electronics, including telematics devices, dash cameras, and GPS systems, ensuring they function seamlessly within the vehicle environment. Your expertise will help enhance our customers’ experiences. - $500 sign on bonus Key Responsibilities • Perform high-quality installations of telematics devices and other automotive electronics in customer vehicles at their places of business, ensuring compliance with industry standards., • Conduct thorough testing and diagnostics post-installation to verify functionality and resolve any issues promptly., • Provide exceptional on-site support to customers during installations, ensuring their satisfaction throughout the process., • Collaborate with the logistics team to manage installation schedules and optimize travel routes to minimize downtime for customers., • Maintain a clean and organized work environment while adhering to safety protocols and company policies., • Document installation processes and report troubleshooting findings accurately in the company systems., • Stay updated with the latest automotive technology trends and IntelliShift product offerings to provide informed recommendations to customers., • Communicate effectively with project managers and other technicians to facilitate smooth installations and resolve issues efficiently. Requirements What You’ll Need to Succeed • High school diploma or equivalent; Technical or vocational education in automotive technology or electronics is highly preferred., • 2+ years of experience in automotive electronics installation or related fields., • In-depth knowledge of automotive 12V systems, wiring diagrams, and installation techniques., • Familiarity with telematics devices, dash cameras, GPS systems, and related automotive electronics., • Able to utilize a DMM effectively., • Strong problem-solving skills and the ability to troubleshoot technical issues promptly., • Excellent communication and interpersonal skills to effectively interact with customers and team members., • Valid driver's license and a clean driving record; travel to various customer locations is required., • Personal work vehicle required to get to appointments., • Ability to work independently or as part of a team and manage time effectively in a fast-paced environment., • Ability to travel, and work evenings/weekends as required. Standard work week is Tuesday through Saturday. Bonus Skills (Preferred but Not Required) • ASE or MECP certification in automotive electronics or related fields., • Experience with remote vehicle diagnostics and telematics systems., • Familiarity with safety protocols and regulations related to automotive installations. Benefits We offer competitive compensation, commensurate with experience; $25 -$35 an hour. We also offer outstanding benefits to simplify the lives of our employees and show them how much we appreciate their contributions. IntelliShift Services provides company-subsidized medical insurance for all employees (and largely subsidized coverage for families), dental, vision, and 401K with a 4% company contribution. We also provide daily car allowance and cell phone stipends, travel pay, PTO and more!

Job DescriptionDescriptionKing Quality Roofing powered by Victors Home Solutions is one of the largest home improvement companies in the Midwest, honored to serve our homeowners with premium products, industry-leading warranties, and an exceptional customer experience. We specialize in full-service exterior home improvement projects, including roofing, insulation, windows, siding, and more. We pride ourselves on expert workmanship, quality products, and a commitment to doing what's right for our homeowners. At King Quality Roofing, you'll be surrounded and supported by dynamic, fun, engaged people. Built On Integrity isn't just a motto — it's our core philosophy. We love our people. We love our customers. We love our work. We're looking for a motivated, dependable Roofing Technician – Level 1 to join our growing team! This entry-level position will support our Service and Windows departments, assisting with residential roofing repairs, window service, installations, and warranty-related work. If you're mechanically inclined, enjoy working with your hands, take pride in your work, and want to build a career with a company that values quality and integrity, we'd love to meet you! What You'll Do: • Assist with residential roofing service calls, repairs, and maintenance., • Support window installation, replacement, adjustment, and repair projects., • Assist with diagnosing and addressing roofing and window-related issues., • Perform minor repairs and warranty work under the direction of experienced technicians., • Help identify leaks, damaged shingles, flashing issues, and window-related concerns., • Properly handle tools, equipment, materials, and job-site preparation., • Maintain a clean, organized, and safe work environment., • Communicate professionally with homeowners and provide a positive customer experience., • Follow established installation procedures, safety standards, and company expectations., • Work alongside senior technicians to develop technical skills and expand product knowledge. What We're Looking For: • Previous experience in roofing, construction, home improvement, or a related trade is a plus., • Basic understanding of hand tools, power tools, and construction materials., • Mechanical aptitude and willingness to learn new skills., • Strong attention to detail and pride in workmanship., • Dependable, punctual, and professional., • Comfortable working outdoors and at various job sites., • Ability to work on ladders, rooftops, and at various heights while following proper safety procedures., • Strong communication and customer service skills., • Ability to work independently when appropriate and as part of a team., • Previous residential roofing repair or service experience., • Exposure to residential window installation or replacement., • Familiarity with roofing systems, flashing, sealants, and window components., • Experience working in a customer-facing home improvement environment. Benefits Offered: • 401(k) with company match., • Health insurance., • Dental insurance., • Vision insurance., • Paid time off., • 8 paid holidays., • Employee referral program., • Employee discount.

Job Description HVAC Service Technician Full-Time – Office in West Babylon, NY – Service Territory Greater NY Area Monday–Friday On-Call Rotation Multiple Openings based on experience HVAC Service Technicians are responsible for the installation, maintenance, diagnostics, troubleshooting, and repair of commercial and residential HVAC systems. This role requires strong technical expertise, professionalism, and the ability to provide exceptional customer service while representing the company on-site. What You'll Do • Diagnose, troubleshoot, service, and repair HVAC systems and components, • Perform preventative maintenance and inspections on commercial and residential equipment, • Install and service heating, ventilation, and air conditioning systems, • Repair electronic, mechanical, and electrical HVAC components, • Maintain accurate service documentation and communicate findings clearly, • Deliver outstanding customer service while working independently in the field What You Bring • Minimum of five (5) years of HVAC service and troubleshooting experience, • Strong working knowledge of commercial and residential HVAC systems, • Experience with AAON, Mitsubishi, Daikin, and LG systems preferred, • Ability to diagnose issues efficiently and complete repairs correctly the first time, • Strong communication and customer service skills, • Valid, clean driver's license required, • EPA Certification preferred Compensation & Benefits • Competitive compensation based on experience up to $125,000 plus – Local Union 638B, • Company vehicle and company phone, • Medical and Pension – Local Union 638B, • Paid vacation, sick time and holidays, • Technical training, • Overtime opportunities, • Stable, growing company with consistent year-round work Why Join Air Comfort Service Group? Join a company that values technical expertise, professionalism, and long-term employee success. If you are an experienced HVAC professional looking for a strong team environment and growth opportunity, we encourage you to apply today.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Company parties, • Competitive salary, • Dental insurance, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development NOW HIRING: HVAC INSTALLERS & Service TechniciansGlamorgan Heating & Cooling | Mechanicville, NY GREAT INSTALLERS DESERVE GREAT OPPORTUNITIES! Competitive Compensation | Performance Incentives | Career Advancement Are you an experienced HVAC Installer who takes pride in doing the job right? Are you tired of working for companies where quality craftsmanship, hard work, and dedication go unnoticed? At Glamorgan Heating & Cooling, we believe exceptional installers deserve exceptional opportunities. We're growing rapidly and looking for motivated, experienced HVAC Installers and Lead Install Technicians who want to take their careers to the next level. We're looking for professionals who take pride in their workmanship, maintain high standards, work efficiently, communicate professionally with customers, and want the opportunity to increase their earning potential as they grow. If you're great at what you do, we want to give you the opportunity to build an exceptional career. WHY JOIN GLAMORGAN? ???? Competitive Pay & Performance-Based Earning Opportunities We believe quality workmanship, productivity, efficiency, and leadership should be recognized and rewarded. Our goal is to provide strong earning opportunities for installers who consistently deliver excellent results. ???? Career Advancement Opportunities We're building a growing installation department with opportunities for skilled installers to advance into lead technician, field supervisor, installation management, and other leadership positions. ???? Your Work Gets Recognized We value technicians who take ownership of their jobs, maintain excellent quality standards, work efficiently, and consistently deliver an exceptional customer experience. ???? Ongoing Training & Development We believe great technicians never stop learning. We provide opportunities to develop technical skills, improve installation practices, strengthen leadership abilities, and grow professionally. ???? Tools & Support to Get the Job Done Right We're committed to providing the equipment, resources, and operational support our installation teams need to perform quality work efficiently and safely. ???? A Team That Takes Pride in Winning We're building a culture where hard work, quality craftsmanship, accountability, teamwork, and continuous improvement are the standard. WHAT YOU'LL BE DOING • Install residential heating and cooling systems, including furnaces, air conditioners, heat pumps, and related equipment., • Remove and replace existing HVAC equipment safely and efficiently., • Install and modify ductwork, refrigerant lines, condensate piping, venting, and other system components., • Perform proper system setup, testing, commissioning, and quality checks., • Ensure installations meet applicable codes, manufacturer specifications, and company quality standards., • Maintain clean, safe, organized job sites and respect customers' homes., • Communicate professionally with homeowners throughout the installation process., • Explain basic system operation, maintenance needs, and equipment features to customers., • Work collaboratively with other installers, technicians, and management., • Complete assigned installations efficiently while maintaining exceptional workmanship., • Participate in ongoing technical training and professional development., • For lead technicians, provide guidance, direction, and accountability to assigned installation team members. WHO WE'RE LOOKING FOR We're looking for installers who take their trade seriously and want to be recognized for doing exceptional work. Professional Appearance & Conduct Must maintain a clean, professional appearance, follow company uniform and dress code requirements, and represent Glamorgan Heating & Cooling positively at every job site. Pride in Quality Craftsmanship Must take pride in clean, organized, professional installations and demonstrate strong attention to detail. Doing the job correctly, safely, and to company standards is non-negotiable. Strong Communication Skills Must be able to communicate clearly and respectfully with homeowners, teammates, and management. We expect our installers to provide customers with an excellent experience from arrival through job completion. Outstanding Customer Interaction Must be personable, respectful, professional, and comfortable interacting with homeowners. Maintaining a positive customer experience and protecting the customer's home are essential responsibilities. Willingness & Ability to Learn Must be coachable, open to constructive feedback, and eager to continuously improve technical skills, productivity, and professional development. Technical Knowledge & Installation Skills Must have experience with residential HVAC installations and demonstrate a strong understanding of installation procedures, system components, and industry best practices. Efficiency & Productivity Must be capable of working efficiently, staying organized, managing time effectively, and completing installations without sacrificing safety or quality. Accountability & Strong Work Ethic Must be reliable, punctual, self-motivated, and willing to take responsibility for assigned work and outcomes. Leadership Potential We're especially interested in experienced installers who can lead by example, help develop other technicians, and contribute to building a high-performing installation department. Team-First Attitude Must maintain a positive attitude, work well with others, and contribute to a culture of teamwork, accountability, and excellence. BASIC REQUIREMENTS • Previous residential HVAC installation experience., • Strong knowledge of HVAC equipment, installation procedures, and applicable mechanical codes., • Experience installing furnaces, air conditioners, heat pumps, and related equipment., • Ability to read and interpret installation instructions, equipment specifications, and technical diagrams., • Ability to safely use HVAC installation tools and equipment., • Strong attention to detail and commitment to quality workmanship., • Professional appearance and willingness to follow company dress code., • Excellent communication and customer service skills., • Willingness to participate in training and follow company installation procedures., • Valid driver's license with an acceptable driving record., • Ability to perform the physical responsibilities of an HVAC installation position safely. EPA Section 608 certification and previous lead installation experience are preferred. Appropriate certification is required when performing regulated refrigerant work. THIS ISN'T JUST ANOTHER INSTALLATION POSITION. At Glamorgan Heating & Cooling, we're focused on building one of the strongest installation teams in the area. We want installers who are proud to put their name on their work, who strive to improve every day, and who want the opportunity to build a successful long-term career. We believe the best installers combine technical expertise, craftsmanship, professionalism, efficiency, and a commitment to delivering an exceptional customer experience. Your craftsmanship gets you noticed. Your professionalism, accountability, leadership, and desire to grow are what will set you apart. We're looking for individuals who want to be part of something bigger than just another installation crew. ARE YOU READY TO BUILD SOMETHING GREAT? If you're an experienced HVAC Installer or Lead Installation Technician who takes pride in quality work, wants to continue learning, and is motivated to grow professionally and financially, we want to hear from you. Don't settle for average when you have the potential to be exceptional. JOIN GLAMORGAN HEATING & COOLING — APPLY TODAY!

Job Description As an Experienced Residential HVAC Service Technician &/or Installer at NH Ross, you will be responsible for the installation, maintenance, and repair of heating, ventilation, and air conditioning systems in residential properties. Your role is vital in ensuring the comfort and satisfaction of our clients by providing efficient and reliable HVAC solutions. You will work closely with homeowners to assess their HVAC needs, troubleshoot issues, and deliver high-quality installations and service. The ideal candidate will have a strong technical background in HVAC systems, excellent problem-solving skills, and a commitment to outstanding customer service. PAY RANGE: $70,000 - $120,000 Per Year with Additional Bonus Opportunities Responsibilities • Repair and Replace HVAC systems, including air conditioners, furnaces, and existing ductwork in residential settings., • Perform routine maintenance and repairs on existing HVAC equipment to ensure optimal performance., • Diagnose HVAC system malfunctions and provide effective solutions to repair them., • Communicate with clients to explain service options, provide estimates, and address any questions., • Maintain detailed records of services rendered and parts used during repairs and installations., • Stay updated on industry trends, technologies, and best practices to provide clients with the best service possible. Requirements • Proven experience as an HVAC technician or installer., • Valid HVAC certifications., • Strong knowledge of HVAC systems, repairs, and installation procedures., • Excellent diagnostic and problem-solving skills., • Ability to work independently and manage time effectively., • Strong communication skills for effective interaction with clients and team members., • Physical capability to handle manuals labor and lift heavy equipment., • High school diploma or equivalent; additional training or certification in HVAC technology is a plus. Benefits • $5,000 Sign-On Bonus, • 401(k) matching, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Take Home Truck, Start from Home., • iPad, • Tool allowance, • Boot allowance

Job DescriptionHVAC Installation ManagerGlamorgan Heating & Cooling Location: Mechanicville, NY Job Type: Full-Time Compensation: Competitive salary based on experience, with performance-based earning opportunities. About Glamorgan Heating & Cooling Glamorgan Heating & Cooling is a rapidly growing residential HVAC and plumbing company serving New York's Capital Region. We are committed to delivering exceptional customer experiences, high-quality installations, and industry-leading workmanship. As our company continues to grow, we're seeking an experienced, motivated, and results-driven HVAC Installation Manager to lead our installation department. This is a key leadership position within our organization. The ideal candidate will combine strong technical HVAC knowledge with exceptional leadership, communication, and organizational skills. We aren't simply looking for someone to supervise installers. We're looking for a leader who can develop a high-performing department, maintain accountability, improve efficiency, and help our company continue to grow. Key Responsibilities Installation Team Leadership • Lead, manage, and develop multiple residential HVAC installation crews., • Establish clear expectations for professionalism, productivity, quality, and customer service., • Hold installers accountable for performance, attendance, workmanship, and company standards., • Conduct regular team meetings, training sessions, and performance evaluations., • Identify opportunities to improve individual and team performance., • Coach installation leads and helpers to develop their technical and leadership abilities., • Assist with hiring, onboarding, and training new installation employees., • Foster a positive, professional, and results-driven team culture. Installation Scheduling & Operations • Oversee daily installation operations and coordinate with dispatch and office personnel., • Ensure installation crews are assigned appropriately based on job requirements and technician skill levels., • Review upcoming installations to identify potential challenges before work begins., • Coordinate with the Parts & Inventory Manager to ensure equipment and materials are prepared and available., • Monitor job progress throughout the day and resolve operational challenges., • Reduce unnecessary downtime, return trips, and incomplete installations., • Ensure installation schedules and customer commitments are consistently met., • Maintain effective communication between installation crews, sales, service, and office staff. Installation Quality & Technical Oversight • Ensure all HVAC installations meet company quality standards, manufacturer specifications, and applicable codes., • Maintain proper installation procedures for furnaces, air conditioners, heat pumps, boilers, and related equipment., • Verify installations follow approved system designs, including Manual J calculations and applicable ductwork requirements., • Ensure appropriate commissioning procedures are completed, including airflow verification, static pressure testing, refrigerant charge verification, and system performance testing., • Conduct routine job site inspections and quality-control evaluations., • Troubleshoot complex installation issues and provide technical support to crews., • Ensure required installation documentation, photographs, checklists, and customer paperwork are completed., • Address workmanship concerns and ensure corrective actions are completed promptly., • Maintain high standards for job site cleanliness, equipment presentation, and customer property protection. Productivity & Profitability • Monitor installation labor hours, material usage, and job profitability., • Identify opportunities to improve installation efficiency without sacrificing quality., • Reduce installation callbacks, unnecessary expenses, wasted materials, and return visits., • Ensure installation crews complete projects within established labor and production targets., • Review job costing and work with management to improve departmental gross profit., • Identify and address recurring operational problems affecting profitability., • Monitor installation performance and report results to company leadership. Customer Experience • Ensure customers receive professional, respectful, and consistent service throughout the installation process., • Maintain clear communication regarding installation expectations, scheduling, and project completion., • Assist with resolving installation-related customer concerns., • Ensure crews maintain professional appearances, follow company dress codes, and protect customers' homes., • Verify systems are explained to homeowners and customers understand their new equipment., • Promote a culture of professionalism, integrity, and outstanding customer service. Safety & Compliance • Enforce company safety policies and applicable workplace safety requirements., • Ensure technicians use appropriate tools, protective equipment, and safe work practices., • Promote safe handling of refrigerants, electrical equipment, fuel systems, and installation materials., • Maintain compliance with applicable mechanical, electrical, plumbing, and building codes., • Ensure required permits, inspections, and installation documentation are properly coordinated., • Address unsafe conditions immediately and maintain a safety-focused work environment. Qualifications • Minimum 5 years of hands-on HVAC installation experience preferred., • Previous experience as an HVAC Installation Manager, Field Supervisor, Lead Installer, or similar leadership position., • Strong technical knowledge of residential heating and cooling systems., • Experience installing furnaces, air conditioning systems, heat pumps, boilers, and related equipment., • Strong understanding of airflow, ductwork, static pressure, system sizing, and installation best practices., • Ability to troubleshoot complex HVAC installation issues., • Strong leadership, communication, and conflict-resolution skills., • Experience managing multiple installation crews and coordinating daily operations., • Ability to read installation specifications and technical documentation., • Comfortable using computers, mobile applications, and field service software., • ServiceTitan experience is a plus., • Valid driver's license with an acceptable driving record., • EPA Section 608 certification preferred., • Strong organizational skills and the ability to manage competing priorities. What We're Looking For We want a leader who takes ownership of the installation department and treats its success as their personal responsibility. The right candidate will be someone who: • Leads by example and earns the respect of their team., • Holds employees accountable while helping them improve., • Understands that high-quality workmanship and strong profitability go hand in hand., • Anticipates problems rather than reacting to them., • Communicates effectively with technicians, customers, and leadership., • Is comfortable making decisions and taking responsibility for results., • Takes pride in building a successful, organized, and high-performing team. We're looking for someone who wants more than just another management job. We want someone excited about helping build and lead a growing installation department. What We Offer • Competitive salary based on experience., • Performance-based earning opportunities., • Leadership role within a growing HVAC and plumbing company., • Opportunities for professional development and advancement., • Supportive ownership and management team., • The opportunity to make a measurable impact on departmental performance., • A company culture focused on accountability, teamwork, and excellence. Join Glamorgan Heating & Cooling If you're an experienced HVAC professional with strong leadership abilities and a passion for developing successful teams, we'd love to hear from you. Help us build an installation department recognized for exceptional workmanship, outstanding customer experiences, and operational excellence.

Job Description The Help Desk duties which may include, but are not limited to: Providing outstanding customer service for Tier 1 service requests, incidents, and problems reported by Clients. The Technician will troubleshoot and resolve technical and procedural issues in an efficient and timely fashion over the phone, in person and through remote connectivity software. Help requests will come from our clients through email, phone calls, or the help desk system. The Help Desk Technician will ensure that all Service Desk requests, incidents, and problems are entered into ticket tracking system with accurate, detailed information. This position is also responsible for procurement, issuance, tracking of new and/or replacement computers/peripheral devices for customers as needed, ensuring replacement device is working properly. Must be able to work flexible hours with the understanding that workdays can be in excess of normal hours and some weekend and holiday work may be required. Responsibilities: • Help Desk or Service Desk experience, • Fundamental Client Network configuration and troubleshooting using TCP/IP over Ethernet, Wireless Networking and WAN, • Printer installation, maintenance, and troubleshooting, • Installation, management, and support of Malware removal tools (anti-virus, anti-spam), • Maintenance and upgrades of desktop PCs, thin clients, peripherals, laptops and the software that they contain Provide hardware and software technical and procedural support to external clients, • Knowledge and hands-on experience with the following: Operating Systems: Windows 2008/2012 Server, Windows XP/7, and Windows 8.1., • Windows Server Activate Directory Experience (Create, Edit and Delete Users Accounts, Unlock Account, Group, Permissions), • Microsoft Exchange Knowledge, • Working knowledge of remote connectivity technologies such as Citrix, VMware View, Team Viewer, VNC and Microsoft Remote Desktop Required Experience and Qualifications: • Associate’s degree or currently enrolled in a IT related degree program; experience may be substituted for education, • Entry Level with 1-2 years’ Experience in related field, • Effective customer service, and verbal and written communication skills Strong organizational and analyzing skills, • Ability to work independently and as part of a team, • Professional attitude, self-motivated, strong work ethic and the ability to work in a fast-paced and dynamic environment, • Be committed to Ozkar Services mission, and be willing to go above and beyond, • Ability to be “on call" and “on standby" in relation to the workload, • Ability to complete on-the-job and/or classroom training in order to remain competitive in Information Technology field., • Working Knowledge on Ticketing System ConnectWise and Management Console LabTech, • Must be able to Multitask in stressful office environment, • Technical Certification Requirements: Comp-TIA A+, Comp-Tia Network +, Microsoft MSCE, Cisco CAN Work Environment: • Employee must be able to travel to other work sites as required, • Must be able to lift 75 lbs

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free food & snacks, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Build Technology. Solve Problems. Make a Difference. Connected Technology is a growing Managed IT Services and Physical Security provider serving businesses, nonprofit organizations, emergency service organizations, and public agencies throughout Long Island. We are seeking a dependable, professional Field Services Technician who enjoys hands-on work, helping clients, and solving problems. What You Will Be Doing Install cabling, cameras, access control devices, wireless networks, computers, printers, and VoIP systems. Troubleshoot hardware, software, Microsoft 365, networking, and connectivity issues. Act as onsite hands for senior engineers and maintain accurate documentation. Installation & Deployment • Run, terminate, label and test Cat5e/Cat6 cabling, • Install cameras, access control devices, wireless APs, switches and firewalls, • Deploy PCs, laptops, printers and phones, • Assist with office moves and technology refresh projects Technical Support • Troubleshoot Windows, Microsoft 365 and networking issues, • Resolve hardware and software problems onsite, • Follow guidance from Level 2 and Level 3 engineers, • Document work in the ticketing platform What We Are Looking For • 1-3+ years of IT, low-voltage, telecom, field service or related experience, • Strong customer service skills, • Ability to think independently and solve problems, • Valid driver license and reliable transportation, • Ability to lift 50 lbs and use ladders safely The Ideal Candidate Reliable, professional, adaptable, well spoken, positive, and committed to delivering an exceptional client experience. Why Join Us Competitive compensation, PTO, holidays, healthcare options, 401(k), training reimbursement, advancement opportunities, and exposure to a wide range of technologies.

Job Description On-Call IT Field Technician – PC, Mac, POS and TV Mounting • Location: Multiple U.S. Cities (Local, Onsite Support), • Job Type: Independent Contractor (1099), • Pay: $35 per hour (on-site), • Schedule: Flexible – You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities • Troubleshoot and repair Windows and macOS issues, • Resolve WiFi, router, and wired network problems, • Install and configure printers and scanners, • Replace or upgrade hardware components, • Reinstall operating systems using bootable tools, • Document work and communicate clearly with customers, • Install and support POS systems and run Cat5e or Cat6 cabling, • Perform outdoor TV mounting and basic AV setup Requirements • Two or more years of experience in IT support or field service, • Strong networking and diagnostic skills, • Reliable transportation and valid driver’s license, • Ability to work independently and provide professional customer service, • Ability to lift up to 50 lbs, • Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits • IT and POS work: $35 per hour for time on site, • Outdoor TV mounting: starts at $65 per mounted device, varies if a helper is required, • Flexible scheduling — accept only the jobs that match your route and availability, • National brand recognition and continuous job offers, • Dispatch and tech support team available to assist remotely What to Expect After You Apply • Intro Call – A recruiter will contact you for a quick chat, • Onboarding – Complete paperwork and tax forms electronically, • Background Check – Mandatory before activation, • Set Your Availability – You enter your availability in our tech portal, • Start Receiving Jobs – You’ll be dispatched jobs based on proximity & skills

Job Description We are a growing IT company; a great place to start and grow your career! CCS is a leading technology consulting firm providing best in class solutions to our clients for over 45 years. Expressed simply in our tagline – Right People, Right Results, Right Careers! Our philosophy is, in fact, an obsession that drives our behavior, our culture and our work. It's why we put tremendous emphasis on hiring individuals that embody the principles that align with our obsession. We continue to successfully provide network integration, support services, products solutions, and applications services to our valued clients in the northeast. Our focus is simple...our goal is to make technology easy and to help our clients use it as effectively as possible. CCS is looking for an initiative-taking and technically skilled Level 2 Field Services Technician to join our Network Operations Center (NOC) team. This role is ideal for individuals enthusiastic about IT infrastructure, eager to grow their skills, and committed to delivering exceptional support in a fast-paced environment. Work Schedule: Monday - Friday 8:00am - 5:00pm, with changes as needed for particular projects. Participate in the on-call rotation alongside Level 1 and Level 2 technicians, providing after-hours support as required. This position is based in our Hauppauge, Long Island office. Site visits throughout the Tri-State area will be required. A reliable vehical and valid driver's license is required. What You'll Do: • Perform equipment provisioning, decommissioning, and deployment activities for client environments., • Assist engineering teams with system migrations, data transfers, and implementation-related tasks., • Provide remote and onsite technical support for desktops, laptops, users, and associated peripherals., • Create, update, document, and escalate support tickets as required., • Monitor and respond to alerts, performing primary and secondary troubleshooting to resolve issues., • Troubleshoot and support desktop operating systems, software applications, and user environments., • Install, configure, and maintain desktop operating systems and endpoint devices., • Configure, troubleshoot, and support Microsoft Office and other business applications., • Perform hardware diagnostics, repair coordination, and software troubleshooting for end-user devices., • Troubleshoot network connectivity issues, including NICs, switch ports, cabling, and local network infrastructure., • Install, configure, and support network-connected devices and client workstation environments., • Perform physical network troubleshooting, including cable termination, cable testing, switch troubleshooting, and equipment power cycling., • Resolve escalated incidents from Level 1 support personnel and coordinate further escalation when necessary., • Assist with small projects, documentation efforts, and statement of work preparation under engineering guidance., • Participate in special projects requiring independent troubleshooting, investigation, and solution implementation., • Participate in an on-call rotation, including occasional evening and weekend support activities SALARY RANGE: $50,000 - $55,000 What You'll Bring: • 2-4 years of experience in a Help Desk, Technical Support, or User Support environment, • Experience supporting PC hardware, software, server hardware, and Windows operating systems., • Strong knowledge of Windows 10 and Windows 11 installation, configuration, administration, and troubleshooting, • Experience troubleshooting and supporting SaaS-based applications., • Experience installing, maintaining, and troubleshooting Microsoft 365 and Microsoft Office applications., • Experience administering Active Directory users, groups, and Group Policy Objects (GPOs), • Understanding of networking fundamentals, including TCP/IP, DNS, and DHCP, • Knowledge of client/server environments and related technologies, • Ability to troubleshoot hardware, software, network, and user-related issues in a fast-paced environment., • Strong analytical, problem-solving, and troubleshooting skills., • Ability to quickly learn and follow complex technical procedures., • Excellent communication, customer service, time management, and organizational skills, • Strong written and verbal communication abilities, including the creation of clear technical documentation and procedures., • Ability to multitask, prioritize competing tasks, and manage workload effectively., • Ability to work independently while also contributing effectively within a team environment., • Initiative-taking, customer-focused, and meticulous, • Ability to lift to 50 lbs. (e.g., computers, monitors, printers, and networking equipment) Preferred Qualifications: • Associate or bachelor's degree in information technology, Computer Science, Business, or a related field, or equivalent industry experience., • Microsoft certifications or demonstrated experience supporting Microsoft technologies., • Industry certifications such as CompTIA Network+ and Security+, • Vendor certifications from Microsoft, Apple, IBM, HP, Cisco, or similar technology manufacturers, • Experience with Group Policy administration, scripting, and automation, • Experience supporting VMware virtualization environments. #IND #zr CCS Offers: • Competitive salaries, • Comprehensive benefits including:, • Medical and dental plans, • Company paid vision and short and long term disability plans, • Flexible spending programs including Healthcare, Dependent Care, Transit and Parking, • 401K with employer match, • Tuition reimbursement, • Onsite fitness center (or gym membership reimbursement for client or satellite based employees), • Company paid life Insurance, • Paid holidays and vacation, • Technical certification gift card rewards program Come experience our unique culture and see how our "right people, right results" philosophy has led to our outstanding success! We are great place to start your IT career! EEO Statement: Custom Computer Specialists is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. To request a reasonable accommodation to apply for this position or to enable qualified individuals with disabilities to perform essential job functions, contact humanresources@customonline.com or 631-864-6699.

Job Description SmartSource®, an ABCOM Technology Group company, has more than 35 years of experience serving clients' business technology needs in the events, staffing, legal, government, finance, education, entertainment, and meeting production industries. The company provides service throughout North America through its fully staffed and equipped offices in major metropolitan markets. SmartSource draws from its extensive inventory of IT, AV, and interactive technologies to deliver solutions as varied as computers for contract staff, office equipment for temporary spaces, or multi-story video walls for trade shows and events. The SmartSource team is passionate about leveraging its expertise to empower clients to excel. SmartSource will afford you an exciting career opportunity. We offer a fast-paced and dynamic work environment. Most importantly, you will be provided the support and environment to excel and succeed with an industry leading company. If you are enthusiastic, highly motivated and looking for a great opportunity, we encourage you to apply today. Job Summary: As an IT/AV Field Technician with SmartSource, your primary responsibility will be providing “top-notch” customer service with a strong focus on tradeshow and corporate meeting environments. Duties include product configuration, prep and testing, transportation of equipment, on-site installation of audio visual and computer technology, networking, troubleshooting and technical support. Responsibilities: • In-shop configuration, preparation and testing, transport for on-site installation, customer service, and troubleshooting of our computers, software, and related peripherals in tradeshow and corporate events environments., • In-shop configuration, preparation and testing, transport for on-site set up and operation of Audio and Video equipment including microphones, speakers, mixing consoles, video screens, projectors, video switchers, large displays and related peripherals in tradeshow and corporate events environments. Qualifications: • Strong IT background with expertise in configuring, networking, and troubleshooting computers, printers, and related hardware. Copier repair experience is a plus., • The ideal candidate will also be proficient at setting up and operating basic audio-visual components, be able to troubleshoot and correct operational glitches., • Must have experience with “live events” – trade shows, corporate meetings, and conferences., • Must have a “can-do" attitude, strong customer service focus, and effective communication and people interaction skills as this position interacts directly with our customers., • Requires the ability to think and work independently, meet deadlines, and have extreme attention to detail, while working as a member of a team., • Requires a valid driver’s license and the ability to drive company vehicles to area venues for client events., • Requires loading/unloading of company vehicles. Must be able to lift 50 pounds., • As our clients’ events are held seven days a week, some overtime, weekends, and overnight travel is required., • A desire to continually improve performance and take service to the next level is vital. SmartSource is an equal opportunity/affirmative action employer. SmartSource does not discriminate on the basis of race, color, religion, gender (including non-binary/third gender), transgender, gender identity or expression, sexual orientation or affectional preference, national origin, citizenship, age, disability, status as a protected veteran, military status, marital status, or status in any group or class protected by applicable federal, state, or local law. SmartSource makes reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act, Rehabilitation Act, and applicable state and local laws.

Job DescriptionJob Requirements Our shop is growing, and we are looking to hire an automotive technician with excellent automotive diagnostic and repair skills to join our team! We offer competitive pay, training and growth opportunities and a positive work environment. Main Duties & Responsibilities: • Follow proper testing & diagnostic procedures to accurately solve vehicle issues, • Maintain a clean, safe working environment, • Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation, • Perform emissions inspections, safety checks and similar state-regulated vehicle examinations, • Test the functionality of parts and systems, • Repair brake and steering systems, • Diagnose and repair electrical and electronic systems, • Replace or repair transmissions and fuel components as needed, • Repair cooling components and systems including air conditioners and engine cooling, • Complete tire changing, balancing, and installation, • Prepared to get additional certification as needed, • Willingness to learn with hands-on training, • Communicate effectively with Service Advisor about vehicle status and required parts and labor, • Explain automotive repairs and issues to non-technical employees and customers as needed, • Uphold the culture and values of our independently owned shop Work Experience Qualifications: • Possess a valid state driver’s license, • High school diploma or equivalent education, • Strong automotive diagnostic and repair skills, • Strong written and verbal communication skills, • Analytical skills When you join the team at your local, independently owned TechNet Professional Service Center, you’ll be working with a shop that takes pride in what they do. A local shop in your community, backed by the support of a Nationwide network. That is just part of what sets a TechNet Automotive Service Center apart from the rest. Come join #TechNetNation! Benefits • Pay between $20-$50/hour, depending on experience

Job Description The Plumber / HVAC Technician will service mixed property types, supporting the installation, repair, replacement, plumbing, and seasonal cleaning of HVAC and plumbing systems, including forced hot air equipment. Responsibilities • Install plumbing and HVAC systems and components., • Perform HVAC repairs and troubleshoot system issues., • Replace HVAC and plumbing equipment as needed., • Service plumbing systems across residential and commercial property types., • Complete seasonal cleaning and maintenance., • Service and maintain forced hot air systems. Preferred Qualifications • 3+ years of experience in plumbing and HVAC service.\nCompany Description We are located in Bay Shore, NY and proudly service residential / commercial buildings in both Suffolk and Nassau County. We specialize in Plumbing & Heating and have been in business for over 50 years. We are located in Bay Shore, NY and proudly service residential / commercial buildings in both Suffolk and Nassau County. We specialize in Plumbing & Heating and have been in business for over 50 years.

Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry.From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment.Not only do we offer a vast fleet that ranks among the best in the indu

Job Description Who We Are Flexible IT is Long Island’s largest Managed Services Provider (MSP), with over 40 years of experience helping businesses streamline their technology. We specialize in IT support, consulting, cybersecurity, and compliance solutions, ensuring our clients stay ahead in an ever-evolving digital world. Our team is built around problem solvers who enjoy making technology work better for businesses. If this sounds like a good fit for you, apply today. Why Join Flexible IT? At Flexible IT, you will work alongside a smart, capable team that values clear thinking, strong execution, and practical solutions. As a Low Voltage Technician, you will gain experience not just with technology, but with people—learning how to support clients in a way that is thoughtful, efficient, and impactful. We are looking for an energetic, self-learner, responsible, and hardworking Low Voltage Technician to join our Hardware Services Team at the largest IT Managed Services Provider (MSP) in Long Island. At Flexible IT, we strive to add value to our clients by sharing our technology expertise. You will be working on a team responsible for supporting and maintaining the technology our clients use to run their businesses. The position requires you to travel to our client’s sites. Structured Cabling • Perform Cable installation, including Data, Voice, Fiber, and Paging, • Termination, Labeling, Testing and Dressing of cabling, • Installation of Data Equipment including Racks, Patch Panels, Cable Trays, and J-Hooks, • Buildout of MDF/IDF Closets, • Rack and Stack of network devices as required in network closets, • Ability to perform repairs by troubleshooting existing cabling system issues Access Control • Perform installation of Access Control Cabling, • Installation and final wiring of Access Control Boards, Readers, and REX Devices, • Ability to configure Users, Groups, Schedules, Doors, and Credentials via Access Control Software, • Experience with installation of Wireless and Electronic Locks a plus IP Surveillance • Perform Cable installation for IP Cameras, • Physical installation of various CCTV camera types, • Install and Program DVR Recording Units, • Configure Analytics such as Face Detection and Recognition, People Tracking, Motion Detection, LPR, Intrusion and Perimeter Protection Additional Skillsets • Project Management, • Industry-specific Manufacturer and BICSI training and/or certifications a plus, • Ability to read Blueprints and Cable Schematics, • Networking knowledge of Routers and Switches, • Drive company vehicles and operate a variety of tools, such as hand tools, power tools, ladders, Scissor Lifts and Test Equipment Pay and perks: Our company culture is relaxed but engaged. The foundation of our culture is built on autonomy, trust, mutual respect, and accountability. We provide challenging opportunities, competitive compensation, outstanding benefits, work-life balance, and industry-leading technology, all while working in an atmosphere that recognizes your efforts and encourages professional development. Sound exciting? Apply today! Powered by JazzHR o6BI2Vs6lm

HVAC Technician: 3 years (Required). HVAC Service Technicians for immediate, full-time employment. We are looking for skilled technicians with 3+ years of experience in residential and commercial HVAC systems*, including maintenance, repair and installation.

HVAC Service Technicians for immediate, full-time employment. We are looking for skilled technicians with 3+ years of experience in residential and commercial HVAC systems, including maintenance, repair and installation. Minimum 3+ years HVAC technician experience* (residential & commercial)

HVAC Service Technicians for immediate, full-time employment. We are looking for skilled technicians with 3+ years of experience in residential and commercial HVAC systems, including maintenance, repair and installation. Minimum 3+ years HVAC technician experience* (residential & commercial)

Job Description We are seeking a Heating Technician to service gas boilers and furnaces for residential homeowners and commercial facilities. This role focuses on reliable boiler servicing, heating repairs, and preventive maintenance. Responsibilities • Service gas boilers and furnaces., • Perform heating system repairs., • Complete preventive maintenance to support reliable system operation., • Support residential homeowners and commercial facilities. Preferred Qualifications • 5+ years of experience in heating system installation and maintenance.\nCompany Description We are located in Bay Shore, NY and proudly service residential / commercial buildings in both Suffolk and Nassau County. We specialize in Plumbing & Heating and have been in business for over 50 years. We are located in Bay Shore, NY and proudly service residential / commercial buildings in both Suffolk and Nassau County. We specialize in Plumbing & Heating and have been in business for over 50 years.

Job Description Digital Provisions, is the leading security integrator on Long Island, New York, delivering advanced security solutions to a wide range of clients, including K-12 schools, businesses, and public institutions. Our passion lies in creating safe environments by partnering with educators, government officials, law enforcement, and private enterprises. Through these collaborations, we design and deploy comprehensive security systems tailored to each client's unique needs. Whether safeguarding schools, businesses, or public spaces, we have the expertise to assess risks and implement solutions that protect people and property, allowing our clients to focus on their core missions. The Security Field Service Technician is responsible for the installation, configuration, and integration of security systems, including access control, surveillance cameras, intrusion alarms, and structured low-voltage cabling. This role focuses on project-based security installations, ensuring all systems meet industry standards, project specifications, and customer requirements. The ideal candidate will have a strong background in low-voltage systems, a solid understanding of security infrastructure, and the ability to execute high-quality installations in commercial environments. Key Responsibilities: • Security System Installation & Configuration, • Install and configure access control systems, surveillance cameras, intrusion alarms, and security automation systems., • Install and secure low-voltage devices such as door controllers, card readers, cameras, and alarm sensors., • Perform low-voltage circuit wiring, terminations, and connections for security equipment., • Ensure all installed systems are operational, tested, and optimized for customer use., • Interpret and follow blueprints, wiring diagrams, and technical specifications for system layouts., • Low-Voltage & Composite Wiring, • Pull, terminate, and manage various types of low voltage cabling for security devices., • Ensure proper wire management and organization for professional-grade installations., • Work with conduits, cable management systems, and structured cabling pathways., • System Integration & Programming, • Integrate security systems with network infrastructure, access control platforms, and video management software., • Perform basic IP networking configurations, including assigning static IPs and setting up remote access., • Conduct firmware updates and apply necessary patches to security devices., • Compliance & Safety, • Follow OSHA safety protocols and industry best practices for low-voltage electrical work., • Ensure all work complies with local, state, and national low-voltage regulations., • Maintain organized documentation for system installations, device locations, and wiring pathways. Qualifications: • High school diploma or equivalent., • 5+ years of experience in security system installation and low-voltage infrastructure., • Strong proficiency in access control systems, surveillance cameras, and alarm systems (e.g., Milestone, Axis, Genetec, Lenel S2, Bosch)., • Hands-on experience with low-voltage wiring, terminations, and composite wiring., • Ability to read and interpret electrical schematics and security layouts., • Strong attention to detail and ability to produce clean, professional installations., • Valid driver's license with a clean record and ability to travel to job sites. Preferred: • Experience with relay logic, maglocks, and door strike installations., • Knowledge of power supply configurations and PoE device setups., • Relevant manufacturer certifications (e.g., Milestone, Lenel S2, Genetec, Axis). Work Environment & Physical Demands: • On-site work at customer locations, including commercial buildings, schools, and industrial facilities., • Ability to lift 50+ lbs, climb ladders, and work in tight spaces., • Comfortable standing for long periods of time and complete overhead work for long periods of time., • Standard schedule is Monday through Friday, 3pm to 11pm. During schools breaks (ie: summer break) and holidays, the standard schedule is 7am to 3pm., • Occasional weekend work may be required for project deadlines. Benefits: • Nine company observed holidays throughout the year, • Hourly Range $65.00 - $70.00 an hour, • Required training/licensing paid for by company, • Voluntary professional development opportunities, • Overtime and potential bonus pay

Job Description JFA Collision is hiring experienced collision repair professionals to join our growing team! We are an established, busy collision repair facility in Bohemia, NY, looking for skilled, reliable, and motivated individuals who take pride in their work. We have multiple positions available and are seeking experienced technicians who can deliver quality repairs in a professional, fast-paced environment. Positions Available 1. Frame Technician • Perform structural and frame repairs on collision-damaged vehicles., • Operate frame machines and computerized measuring systems., • Diagnose and correct structural damage according to manufacturer specifications., • Ensure proper vehicle alignment and structural integrity. 1. Auto Body Technician • Perform collision repairs, including dent removal, panel replacement, and metalwork., • Repair and replace damaged body panels., • Perform body filler work and panel alignment., • Maintain high-quality workmanship while meeting production expectations. 1. R&I Technician (Removal & Installation) • Disassemble and reassemble vehicles throughout the collision repair process., • Remove and reinstall bumpers, doors, trim, lights, and other vehicle components., • Identify hidden damage during disassembly., • Ensure proper fitment and functionality of all reinstalled components. 1. Automotive Painter • Perform automotive refinishing, including color matching, blending, and painting., • Apply basecoat and clearcoat to achieve professional finishes., • Prepare surfaces and inspect completed paintwork., • Maintain consistent paint quality and production efficiency. Qualifications • Previous professional collision repair experience required., • Strong attention to detail and commitment to quality workmanship., • Ability to work independently and as part of a team., • Familiarity with modern vehicle repair techniques and equipment., • Dependable, punctual, and motivated., • I-CAR certifications are a plus. What We Offer • Competitive compensation based on experience and skill level., • Steady, full-time work., • Busy, established collision repair facility., • Professional work environment., • Opportunities for long-term employment and growth. Whether you specialize in frame repair, bodywork, vehicle disassembly/reassembly, or automotive painting, we want to hear from you! Apply today and become part of the JFA Collision team! Please indicate which position you are applying for and briefly describe your experience. \nCompany Description We are a family owned business established over 30 years. High volume shop. We are a family owned business established over 30 years. High volume shop.

Job DescriptionParts & Inventory ManagerGlamorgan Heating & Cooling Location: Mechanicville, NY Job Type: Full-Time About Glamorgan Heating & Cooling Glamorgan Heating & Cooling is a rapidly growing HVAC and plumbing company serving New York's Capital Region. We pride ourselves on professionalism, quality workmanship, exceptional customer service, and operational excellence. We're seeking a highly organized, motivated, and dependable Parts & Inventory Manager to oversee purchasing, inventory management, warehouse operations, job preparation, and material deliveries. This is a hands-on position that requires someone comfortable working both in the warehouse and out in the field. The right candidate will play a critical role in improving efficiency, reducing unnecessary expenses, and keeping our technicians productive. Key Responsibilities Parts Ordering & Purchasing • Order HVAC, plumbing, and installation materials needed for daily operations., • Maintain positive relationships with supply houses, vendors, and equipment distributors., • Compare pricing and identify opportunities to reduce purchasing expenses., • Track purchase orders, special orders, backorders, and deliveries., • Handle material returns, warranty parts, and defective equipment., • Ensure necessary parts are available before scheduled jobs. Inventory Management • Maintain accurate inventory records for the warehouse and company vehicles., • Monitor stock levels and maintain appropriate quantities of commonly used parts., • Perform routine inventory counts and investigate discrepancies., • Track materials assigned to specific jobs and technicians., • Manage inventory through ServiceTitan and other company systems., • Identify missing, damaged, obsolete, or unused inventory., • Establish organized inventory storage and tracking procedures. Parts Pickup & Job Site Deliveries • Drive company vehicles to pick up equipment, parts, and materials from vendors and supply houses., • Deliver necessary materials directly to technicians and installation crews at job sites., • Respond to urgent parts requests to minimize technician downtime., • Coordinate daily pickup and delivery schedules efficiently., • Transport HVAC equipment, plumbing materials, tools, and other job-related supplies., • Assist with loading and unloading equipment and materials., • Pick up unused materials, equipment, and returns from job sites., • Ensure deliveries are accurate, organized, and completed in a timely manner., • Maintain a clean, organized, and properly operated company delivery vehicle., • Follow all company vehicle policies and safe driving practices. Installation & Service Job Preparation • Review upcoming jobs and determine required equipment and materials., • Pull, organize, and stage installation materials before scheduled jobs., • Prepare complete material packages for HVAC and plumbing installation crews., • Verify materials against job requirements to prevent missing items., • Communicate with managers, dispatchers, and technicians regarding material needs., • Ensure technicians have the supplies necessary to complete jobs without unnecessary trips to supply houses. Warehouse Organization & Maintenance • Maintain a clean, organized, and safe warehouse environment., • Establish clearly labeled storage locations for parts, equipment, and materials., • Receive incoming deliveries and verify quantities and condition., • Organize shelving, storage areas, and equipment locations., • Assist with maintaining organized and properly stocked company vehicles., • Coordinate disposal, recycling, and scrap material management., • Keep warehouse operations efficient and professional. Accountability & Cost Control • Track purchasing expenses and material usage., • Reduce unnecessary purchasing, waste, and material losses., • Ensure materials are properly documented and assigned to jobs., • Identify inventory discrepancies and report concerns to management., • Maintain accurate records of material deliveries and returns., • Provide regular updates regarding inventory levels, purchasing, and operational needs., • Continuously identify ways to improve efficiency and reduce technician downtime. Qualifications • Previous experience in warehouse operations, inventory management, purchasing, or parts management preferred., • HVAC and plumbing material knowledge is strongly preferred but not necessary, • Valid driver's license and acceptable driving record required., • Comfortable driving company vehicles and making deliveries throughout the Capital Region., • Strong organizational skills and attention to detail., • Ability to lift, load, unload, and safely transport materials and equipment., • Strong communication and time-management skills., • Basic computer skills and ability to learn inventory management software., • Experience with ServiceTitan is a plus., • Ability to work independently and prioritize multiple responsibilities., • Professional appearance, positive attitude, and strong work ethic., • Dependable, punctual, and committed to supporting the team. What We're Looking For We're looking for someone who is proactive, dependable, and takes pride in keeping operations running smoothly. The ideal candidate doesn't wait for problems to happen. They anticipate what technicians need, prepare materials ahead of time, maintain an organized warehouse, and respond quickly when field teams need support. This position requires someone willing to jump between responsibilities throughout the day, whether that's organizing inventory, placing orders, preparing equipment, or delivering materials to a technician. Our goal is simple: Keep our technicians working, our jobs moving, and our inventory accurate. What We Offer • Competitive compensation based on experience., • Full-time, stable employment., • Opportunities for growth and advancement., • A fast-growing company with a strong team environment., • The opportunity to take ownership of an essential company department. Join Our Team If you're organized, motivated, dependable, and enjoy a combination of warehouse operations and hands-on field support, we want to hear from you. Join Glamorgan Heating & Cooling and help us build a more efficient, productive, and successful operation.

Job Description Traveling Master Pool Craftsman – Plaster & Tile Full-Time | Year-Round | Travel Required New York – Multiple Locations About the Position We are looking for an exceptionally skilled Master Pool Finishing Craftsman with extensive hands-on experience in pool construction, plastering, tile installation, coping, and high-end pool finishes. This is a specialized construction position for someone who takes pride in precision craftsmanship and understands what it takes to deliver a high-quality finished pool. The ideal candidate will have the experience and technical ability to work independently, oversee construction activities, operate heavy equipment, and ensure every project meets our quality standards. This position will travel between our four New York locations based on construction project needs. Travel between locations is a regular part of the position. Key Responsibilities • Oversee all aspects of pool construction projects from start to finish, ensuring compliance with design specifications, safety standards, and applicable building codes., • Perform and oversee specialized pool finishing work, including pool plastering, tile installation, coping, grout, surface preparation, waterproofing, and other high-end pool finishes., • Read and interpret construction plans, pool designs, measurements, elevations, and project specifications., • Ensure proper preparation and execution of pool surfaces before plaster, tile, and other finishes are applied., • Maintain exceptional attention to detail to ensure finished surfaces are level, smooth, properly aligned, and meet company quality standards., • Identify and resolve construction and finishing issues before they affect the final product., • Operate heavy equipment such as excavators, backhoes, bulldozers, and skid steers in accordance with project specifications and safety guidelines., • Perform excavation, grading, backfilling, site preparation, and other construction activities as required., • Assist with or oversee pool structure, plumbing, tile, coping, decking, plaster, and related construction activities., • Coordinate with project managers, supervisors, subcontractors, and construction crews to keep projects moving efficiently., • Inspect completed work and ensure deficiencies are corrected before project completion., • Maintain a clean, organized, and safe worksite., • Follow OSHA requirements, company safety policies, and all applicable local and state regulations., • Properly maintain and operate company tools, equipment, vehicles, and machinery., • Travel to construction projects throughout our four New York locations as needed., • Provide guidance and hands-on training to less experienced construction employees when necessary., • Take ownership of workmanship, productivity, safety, and the overall quality of the finished pool. What We're Looking For • Extensive professional experience in swimming pool construction., • Demonstrated expertise in pool plastering and finishing., • Strong experience with pool tile installation, coping, grout, waterproofing, and surface preparation., • Ability to independently complete high-quality finishing work with minimal supervision., • Experience operating heavy construction equipment, including excavators, backhoes, bulldozers, and skid steers., • Ability to read and understand construction plans and specifications., • Strong understanding of pool construction methods, materials, elevations, measurements, and finishing techniques., • Excellent attention to detail and commitment to quality workmanship., • Ability to troubleshoot construction and finishing problems and determine the appropriate solution., • Ability to work outdoors in varying weather conditions and perform physically demanding construction work., • Ability and willingness to travel between our New Jersey construction locations., • Valid driver's license and reliable transportation., • Strong safety awareness and ability to work effectively as part of a construction team. The Ideal Candidate The ideal candidate is not a general laborer or pool service technician. We are looking for a true pool construction craftsman who has developed advanced skills through years of hands-on experience. If you can look at a pool shell, tile layout, plaster application, coping installation, or finished surface and immediately recognize what needs to be done to achieve a professional, high-end result, this may be the opportunity for you. If you take pride in your craftsmanship and consider yourself one of the best in the pool construction trade, we want to hear from you.

Job Description Job Type: Full-time Job Description: Performing installation /service and maintenance fire alarm, fire suppression systems, emergency call, and access control systems. In addition, security solutions within the IP video /CCTV, emergency communication, and intrusion alarm arenas at various client locations. The Fire Systems Technician will: · Have knowledge of current State/National Fire and Electrical Codes. · Have database management skills /computer literate. · Work with blueprints, take offs and as-builts. · Install cabling, security, fire alarm, fire suppression system components and perform final connections. · Display strong troubleshooting and problem- solving techniques. · Program IP video/CCTV, access control, intrusion, fire alarm, suppression, and other security system solutions. Fire Systems Technician Requirements: · Must submit and pass a drug screening and background check · Possess a valid driver’s license and a maintain a good driving record · Occasionally lift an 80 lb. extension ladder · Able to work 15 to 25 feet above ground · Familiar with and able to effectively use hand and power tools · Flexibility to work overtime, rotational on-call, and travel overnight as needed · Ability & desire to learn about our products and services A Qualified Fire Systems Technician will have 2+ years of hands-on experience with a strong understanding of fire systems solutions and be highly motivated with an eye towards quality. NICET Certification is a PLUS. Our candidate will be well organized with good written and oral communication skills and be able to work independently. If you are looking to join a dynamic and professional team then we would like to meet you! Sanders Fire & Safety is an equal opportunity employer. This position offers a competitive salary commensurate with experience with an excellent benefit package including health care, paid vacation, and a 401K and profit-sharing plan. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • On-the-job training, • Opportunities for advancement, • Paid time off, • Retirement plan Compensation Package: • Hourly pay, • Overtime pay, • Profit sharing Schedule: • 8 hour shift, • Monday to Friday, • On call Rotation, • Overtime Experience: • Fire alarm/Electrical: 2 years (Preferred) Ability to Commute: • Mechanicville, NY 12118 (Required) Work Location: In person \nCompany Description Sanders Fire & Safety is located in Mechanicville, NY and is an industry leader in the design, installation and maintenance of low voltage systems. Established in 1933, SFS has fostered and continues to develop its reputation as an innovative technology leader and full-service provider for customers throughout upstate New York and Metro NY areas. Our integrated alarm solutions include video surveillance, access control, emergency communications, intrusion alarm, fire alarm, central monitoring and room integrity services. We are currently looking to hire a Fire Systems Technician. In this role, you will be performing installation /service and maintenance of fire alarm, fire suppression systems, emergency call, and access control systems. Sanders Fire & Safety is located in Mechanicville, NY and is an industry leader in the design, installation and maintenance of low voltage systems. Established in 1933, SFS has fostered and continues to develop its reputation as an innovative technology leader and full-service provider for customers throughout upstate New York and Metro NY areas. Our integrated alarm solutions include video surveillance, access control, emergency communications, intrusion alarm, fire alarm, central monitoring and room integrity services. We are currently looking to hire a Fire Systems Technician. In this role, you will be performing installation /service and maintenance of fire alarm, fire suppression systems, emergency call, and access control systems.

Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction. At the front line of the Safelite experience, the Auto Glass Technician is an entrepreneurial, hands-on professional that leverages their Safelite training, industry-leading

The technician also installs and learns our above-ground hydraulic car lifts when not working on air and oil systems. The statewide team is looking for a skilled technician that can learn and install our air and oil systems within car dealerships and automotive shops. The technician assembles compre

The Security Field Service Technician is responsible for the installation, configuration, and integration of security systems, including access control, surveillance cameras, intrusion alarms, and structured low-voltage cabling. Digital Provisions, is the leading security integrator on Long Island,

Security Field Service Technician. The Security Field Service Technician is responsible for the installation, configuration, and integration of security systems, including access control, surveillance cameras, intrusion alarms, and structured low-voltage cabling.

You will assist with daily gutter installations, including fabrication, at customer sites across the territory.You will travel to job sites, follow safety rules, and collaborate with the Field Gutter team to ensure timely, high-quality installations and strong customer service.A valid driver’s lic

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Employee discounts, • Free uniforms, • Opportunity for advancement, • Paid time off Pauls Auto Restoration of NY Inc. is seeking an experienced high-end automotive technician to join our growing team. This position is ideal for a high-level technician who enjoys precision assembly, integrating modern technology into classic vehicles, and working on some of the most exciting builds in the industry. Position Overview We are looking for a skilled technician capable of servicing, assembling, and integrating modern systems into classic vehicles. This role involves working on everything from high-end restorations to advanced resto-mod builds, requiring excellent mechanical and electrical ability. The right candidate must be highly organized, detail oriented, and take pride in producing exceptional work. Core Responsibilities • Service and maintain classic, muscle, and vintage vehicles, • Perform high-end assembly on restoration and custom builds, • Install and integrate modern technology into classic platforms, • Electrical diagnostics and custom wiring integration, • Installation of fuel injection, electronic ignition, and engine management systems, • Install and service Vintage Air or similar HVAC systems, • Suspension, brake, steering, and driveline upgrades, • Install aftermarket performance components, • Diagnose electrical, mechanical, and drivability issues, • Perform precision assembly on high-end builds from platform to completion, • Maintain an extremely organized and clean workspace, • Document work and communicate with service writers and project managers, • Assist with final assembly and quality control Required Skills & Experience • 7+ years automotive technician experience, • Experience with classic cars and muscle cars required, • Strong automotive wiring and electrical troubleshooting ability, • Experience integrating modern technology into vintage vehicles, • Knowledge of:, • Holley Sniper / EFI systems, • American Autowire systems, • Dakota Digital gauges, • Vintage Air systems, • Modern suspension systems, • Disc brake upgrades, • Restomod drivetrains, • Ability to read wiring diagrams and installation instructions, • Strong mechanical and diagnostic skills, • Highly organized and detail oriented, • Pride in producing show-quality work Ideal Candidate The ideal candidate is someone who: • Loves classic cars and high-end builds, • Takes pride in extreme attention to detail, • Works clean, organized, and efficiently, • Has a strong problem-solving mindset, • Enjoys building vehicles to exceptional standards

Job Description Facilities Maintenance Technician Bohemia, NY Join the amazing team of talented and dedicated employees at Dayton T. Brown, Inc.! As a full-time Facilities Maintenance Technician, you will help maintain, improve, and support DTB's Bohemia, NY facilities. The position will cover two large buildings and 31 acres of property. This is a hands-on role for someone who takes pride in quality workmanship, enjoys variety, and is willing to assist with a broad range of facility maintenance activities. Responsibilities include but are not limited to: • Support day-to-day maintenance, repair, renovation, and improvement of DTB's facilities and grounds, • Build new offices and renovate existing areas throughout the facility, • Support general corporate maintenance activities across two large buildings and 31 acres of property, • Assist with HVAC-related maintenance and repairs, • Assist with rebuilding motors and replacing mechanical seals and pumps, • Assist with electrical work, including EMT and PVC conduit installation, • Perform basic plumbing and other facility maintenance tasks as needed, • Safely use common hand and power tools, company equipment, and facility maintenance equipment, • Operate company equipment to plow and clear snow, including snow blowers, • Prioritize multiple maintenance requests and complete additional duties as assigned Required Qualifications: • Min. of a High School Diploma, or equivalent, required, • 3+ years of experience in carpentry, facilities maintenance, building maintenance, or related skilled trade, • Strong carpentry skills, including construction, repair, renovation, and installation, • Experience with basic HVAC, plumbing, electrical, and mechanical maintenance, • Ability to safely use common hand and power tools and facility maintenance equipment, • Ability to troubleshoot maintenance issues and determine appropriate solutions, • Strong attention to detail and commitment to quality workmanship, • Dependable, self-motivated, and able to work independently as well as part of a team, • Professional, positive attitude and ability to work effectively with coworkers, • Ability to prioritize multiple maintenance requests and respond to facility needs, • Ability to physically lift and carry up to 50 pounds, • Ability to work outdoors and operate snow-removal equipment as needed, • Willingness to perform other facilities and maintenance duties as assigned, • US citizenship required Dayton T. Brown, Inc. Offers: At DTB, we value our employees and provide opportunities to grow and succeed. Our benefits and perks include: • Competitive salary, • Medical, dental, and vision coverage, • 401(k) with company match!, • Group Life Insurance, • Tuition reimbursement of up to 100%, • Employee activities and events, • Paid time off, • Family-friendly work culture, • Cash incentives and recognition awards Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Standard Plumbing Services, part of the Altus Fire & Life Safety Family of companies, is looking for a Boiler Technician to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Why Join Us? • Competitive pay: $40.00 - $55.00 per hour, • Comprehensive health and wellness benefits, • Retirement savings opportunities, • Paid time off and holidays, • Ongoing technical training and professional development, • Career advancement opportunities within a growing national organization, • Supportive team environment focused on safety, quality, and customer service Responsibilities • Install and service commercial boilers, • Diagnose plumbing problems and perform repairs, • Install, assemble, maintain, and repair pipes and plumbing fixtures, • Locate and repair water line leaks and remove clogs, • Install and/or repair household appliances like dishwashers, water heaters, toilets, sinks, etc., • Test plumbing and other installed fixtures to ensure proper function, • Follow state laws and regulations and adhere to local building codesRequired Skills, • High school diploma or GED certificate, • 5+ years of professional plumbing experience, • Completion of a vocational school certificate program, associate degree, or apprenticeship preferred, • Valid state driver’s license, • Able to read technical designs and blueprints, • Proficient with plumbing tools, materials, and equipment, • Expert knowledge in piping and ventilation systems, • Available to work on call and respond immediately to plumbing emergencies Hourly Rate: $40.00 - $55.00/ hour

Job Description Industrial Electrical Maintenance Technician – Manufacturing Location: Ronkonkoma, NY Pay: Competitive hourly compensation Type: Full-Time, Non-Exempt Shifts Available: • 1st Shift: 8:00 AM–4:00 PM, • 2nd Shift: 4:00 PM–12:00 AM (may be considered) Position Overview We are seeking an experienced, hands-on Industrial Electrical Maintenance Technician to support the reliability, troubleshooting, repair, and maintenance of automated production and packaging equipment in a high-volume food manufacturing environment. The ideal candidate has a strong industrial electrical background, experience troubleshooting PLC-controlled equipment, and the ability to independently diagnose and resolve electrical and electronic equipment failures. This is an industrial equipment maintenance position, not a residential, commercial construction, or general facilities electrician role. Key Responsibilities • Troubleshoot, diagnose, repair, and maintain electrical and electronic systems on industrial production and packaging equipment., • Identify and resolve equipment failures involving PLCs, variable frequency drives (VFDs), motors, sensors, relays, contactors, and industrial control circuits., • Read and interpret electrical schematics, wiring diagrams, ladder diagrams, and equipment manuals., • Perform electrical troubleshooting using multimeters and other diagnostic equipment., • Diagnose control-system faults and determine whether problems originate from electrical components, sensors, wiring, or mechanical equipment., • Perform preventive and corrective maintenance to minimize production downtime., • Inspect, test, repair, and replace electrical components, motors, controls, and associated equipment., • Troubleshoot industrial motor controls, starters, and power distribution components., • Support equipment installation, commissioning, modifications, and startup activities., • Document maintenance activities, repairs, and work orders using a computerized maintenance management system (CMMS)., • Collaborate with industrial mechanics, production personnel, and maintenance leadership to resolve equipment problems., • Follow established safety procedures, including lockout/tagout (LOTO), electrical safety, GMP, and food manufacturing requirements., • Communicate equipment issues, completed repairs, and outstanding work during shift handoffs. Required Qualifications • Minimum 5 years of recent, hands-on industrial electrical maintenance experience in a manufacturing or production environment., • Strong electrical troubleshooting skills involving industrial machinery and automated equipment., • Experience troubleshooting PLC-controlled equipment and associated control systems., • Ability to read and interpret electrical schematics, wiring diagrams, and ladder logic., • Experience with AC/DC motors, VFDs, sensors, relays, motor starters, and industrial control circuits., • Ability to use electrical diagnostic tools and systematically identify root causes of equipment failures., • Experience performing preventive maintenance and responding to production equipment breakdowns., • Understanding of industrial electrical safety practices, including lockout/tagout., • Ability to troubleshoot independently and prioritize repairs in a production environment., • Strong communication, teamwork, and problem-solving skills. Preferred Qualifications • Technical degree, trade school diploma, apprenticeship, or certification in industrial electricity, electronics, electrical maintenance, or a related field., • Experience troubleshooting Allen-Bradley or Siemens PLC-controlled equipment., • Familiarity with PLC programming software and online diagnostics., • Experience with industrial automation, HMIs, servo drives, and control systems., • Experience in food manufacturing, bakery production, automated packaging, or other high-volume manufacturing operations., • Working knowledge of mechanical systems, pneumatics, and hydraulics., • Familiarity with CMMS software and preventive maintenance programs., • Experience supporting equipment installations, upgrades, or automation improvements. Schedule and Work Environment • Full-time, onsite position at a manufacturing facility in Ronkonkoma, NY., • Primary opening on first shift, with potential consideration for second shift., • Industrial food manufacturing environment with automated production and packaging equipment., • Occasional overtime or weekend support may be required based on production and maintenance needs., • Position requires working safely around industrial electrical equipment and machinery while following established safety procedures. Compensation and Benefits Competitive hourly compensation based on experience, with the final pay range being confirmed. Benefits may include: • Medical, dental, and vision insurance, • Life and disability insurance, • 401(k) retirement plan, • Paid time off, • Opportunities for technical development and career advancement Specific benefit terms and eligibility will be reviewed during the hiring process.

Job Description Maintenance Technician – Manufacturing Location: Ronkonkoma, NY Pay: $34.00 to $38.00 per hour Type: Full-Time, Non-Exempt Shifts Available: Multiple (day, evening, and overnight) Overview We’re seeking experienced, hands-on Maintenance Technicians to support production reliability, equipment repair, and preventive maintenance in a high-volume food manufacturing environment. Ideal candidates are mechanically and electrically skilled, detail-oriented, and thrive in fast-paced operations where uptime is critical. Key Responsibilities • Perform preventive maintenance and repairs on production and packaging equipment., • Troubleshoot mechanical, electrical, and PLC-related issues to minimize downtime., • Read and interpret blueprints, wiring diagrams, and equipment manuals., • Maintain accurate maintenance records through a CMMS system., • Follow all safety, GMP, and company policies while maintaining a clean and safe workspace., • Collaborate with operations and engineering teams to identify and implement process improvements., • Support installation, calibration, and testing of new machinery and components., • Participate in shift hand-offs and team meetings to ensure communication and continuity. Qualifications • Minimum 5 years of experience in industrial maintenance or manufacturing equipment repair., • Solid understanding of AC/DC motors, sensors, drives, and control systems., • Working knowledge of PLC troubleshooting (Allen-Bradley preferred)., • Ability to use precision measurement tools (calipers, micrometers, etc.)., • Familiarity with CMMS software and preventive maintenance programs., • Excellent communication and problem-solving skills., • Flexibility to work different shifts and occasional weekends or overtime as needed. Benefits • Annual performance bonus potential, • Comprehensive medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Growth and advancement opportunities in a stable, team-oriented environment

Job Description Well-established and rapidly growing outdoor lighting company specializing in premium low-voltage landscape and architectural lighting is looking for reliable, hardworking team members to join our crew. This is a hands-on outdoor position installing custom lighting systems for residential and commercial properties across Long Island. Candidates should be comfortable working outside in varying weather conditions and performing physical work, including trenching, digging, running wire, lifting materials, and using hand tools. We are looking for dependable individuals who show up on time, work well with a team, and take pride in quality workmanship. Experience with trenching, landscaping, irrigation, construction, outdoor lighting, or electrical work is strongly preferred. What we’re looking for: • Reliable and motivated work ethic, • Comfortable working outdoors daily, • Experience trenching and digging clean wire paths, • Ability to lift and carry equipment/materials, • Valid driver’s license, • Positive attitude and willingness to learn We offer steady year-round work, opportunities for growth, and a professional team environment focused on craftsmanship and customer service. \nCompany Description Well-established and rapidly growing outdoor lighting company specializing in premium low-voltage landscape and architectural lighting. We design, install, and maintain custom lighting systems for residential and commercial properties, delivering high-quality craftsmanship, exceptional customer service, and innovative outdoor lighting solutions. Our team is passionate about creating beautiful, safe, and functional outdoor spaces while fostering a professional, supportive, and growth-oriented work environment. Well-established and rapidly growing outdoor lighting company specializing in premium low-voltage landscape and architectural lighting. We design, install, and maintain custom lighting systems for residential and commercial properties, delivering high-quality craftsmanship, exceptional customer service, and innovative outdoor lighting solutions. Our team is passionate about creating beautiful, safe, and functional outdoor spaces while fostering a professional, supportive, and growth-oriented work environment.

Experience with signage, vinyl graphics, construction, or installation is helpful, but the right attitude is just as important. As part of our installation team, you will help install a wide variety of signage and visual branding products, including:. Reading drawings, elevations, and installation p

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials.TRAVEL / ON CALL / EMERGENCY RESPONSE.Note: This position requires new hires to attend one-week tra