Trabajos installation technician en Clifton, New JerseyCrear alertas

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada. Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Delivery Driver and Installation Technician This is no desk job. As an Appliance Delivery Driver and Installation Technician your days will be active, delivering and installing commercial laundry and/or air vending equipment to a variety of places around town. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life. Installation Technicians’ work is typically Monday through Friday. A Day in the Life of an Installation Technician: • Deliver and Install laundry or air equipment to customer's homes and client locations, • Deliver and Install ancillary technology (card readers, digital enhancements), • Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machines, • Prepare equipment for delivery (assemble required parts prior to loading on trucks), • Instruct customers and/or clients how to operate equipment in a safe and effective manner, • Staying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks:, • Work Life Balance!, • Medical, Dental, and Vision insurance, • 401k, • Vacation, Sick Time & Holiday Pay What we’re looking for: • High School diploma or equivalent, • Valid Driver's License, • Must be 21 years of age or older, • Basic Plumbing and Electrical knowledge, • Ability to pass pre-employment screening, • DOT Certification is a plus!, • 1 year of job-related experience in the areas of delivery and installation (preferred) training is provided, • Mechanical & Maintenance Experience/Knowledge, • Experience driving box trucks, • Ability to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related), • Knowledge with computers and smart phone technology, • Troubleshooting, • Route Driving Experience a plus!, • Customer Service CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, veteran or other protected status. CSC Service Works will comply with local and state laws regarding minimum wages, including requirements specific to cities, counties, and municipalities.

Job DescriptionBenefits: • Employee discounts, • Free uniforms, • Opportunity for advancement, • Paid time off Job descriptions Title: Automotive Technician Job Type: Full-time Summary S & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER #JCM24

Job DescriptionSenior Facilities TechnicianAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Life Sciences, Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Senior Facilities Technician position is responsible for performing and documenting the required maintenance and monitoring of the facility, systems and equipment. The required duties include execution of Preventive and Corrective/General/Emergency maintenance on the facility’s mechanical systems and equipment, installation of new equipment and general plumbing, electrical and carpentry work, operation of the facility’s systems, including HVAC, environmental monitoring and BMS systems, and other duties as assigned. The position is required to perform the listed duties to minimize equipment downtime, support projects, and ensure that the needs of internal and external customers are met. The objective of this position is to ensure the facility is maintained in a state of maximum uptime and reliability, and provide a safe, clean and efficient environment. • Monitor and respond to equipment or facility alarms, • Travel to and support different sites when necessary., • Work with facilities, engineering and operations to ensure schedules are maintained and delays are properly communicated to customer., • Be available to work nights or weekends, on a rotating basis, to service company needs., • Maintain proper stock, parts, tools, and safety equipment., • Take orders from supervisors for maintenance and repair of systems and buildings, • Clear and clean job sites of debris and other hazardous materials and ensure that they are restored to their original states, • Assist mechanics and other technical staff in testing, cleaning and repairing utility systems, • Provide support in repairing potholes and gutters, • Assist office staff in custodial services and grounds keeping activities, • Clean and maintain floor surfaces, ceilings and windows, • Empty trash receptacles and ensure appropriate disposing off of trash, • Clean restrooms and replenish supplies, • Move equipment and furniture around the building, • Assist stock personnel in handling inventory duties along with providing support in receiving, verifying and storing office supplies, • Maintain full knowledge of the environmental monitoring system as required for monitoring equipment and troubleshooting issues as they relate to equipment and the facility Systems., • Perform all assigned PM’s and WO’s on equipment., • Document all work as performed according to cGMP’s and HCATS SOP’s., • Provide ongoing insight to Supervisors where SOP’s and PM Job Plans need to be updated. Assist Supervisors as required in the preparation of change controls or other required documentation., • Maintain cleanliness of the Facility and Maintenance areas., • Maintain 100% training records for all required training., • Provide 24-hour emergency response as required., • Perform any work required to ensure the safety of the facility and staff, including snow/ice removal as required., • Coordinate contractors, ensure contractors are properly trained and the training is documented before any work is performed., • Perform all duties in accordance with all applicable safety regulations., • Monitor overall job environmental, health and safety aspects and understands the risks and liabilities associated with various facilities maintenance and repair activities., • Must be able to recognize hazard conditions, take appropriate work place safety measures and wear appropriate personal protective equipment to suit work environment.REQUIREMENTS, • 3 to 5+ years of experience in Facility Maintenance., • Good analytical skills and attention to detail with ability to read and interpret blueprints, plans, and manuals., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, ensuring job is done correctly the first time., • Experience in a cGMP environment preferred., • Must be able to communicate clearly and effectively, both written and verbally., • Must be able to work independently and in a team environment, • Must train and become gown qualified to enter and work in classified manufacturing areas., • Valid driver’s license and clean driving record, • Must be able to pass drug test(s) as required by company, • This job may require occasional evening and weekend work.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Headquartered in Los Angeles, Vitalacy partners with hospitals worldwide, assisting them to improve quality and safety measures. Our mission is to reduce healthcare costs while delivering cutting-edge, AI-driven tools that empower care teams to enhance patient safety. By providing predictive alerts and continuous monitoring, we enable proactive care and improved clinical workflows. Through innovation and collaboration, we strive to create a safer, more efficient healthcare environment for patients and providers alike. Client Technician – New Jersey As a Client Technician, you will serve as the dedicated Vitalacy product expert and technician for a healthcare client in New Jersey. This role blends device maintenance, operations and technical support to ensure long-term client success. Key Responsibilities: • Schedule and conduct regular on-site visits to provide continuing support, including:, • IT coordination, • Bluetooth device calibration, • Signal audits and backend map placements, • Device installation, maintenance, and troubleshooting, • Partner with facility EVS and engineering teams to coordinate access, replacements, and equipment needs., • Provide timely on-site or remote troubleshooting support., • Handle hardware replacement and setup as needed (e.g., dispenser sensors, beacons, SmartBand devices)., • Provide regular updates and participate in scheduled check-ins with the Technician Manager and the broader Operations team., • Travel within a 50-mile radius by car, with flexibility for occasional air travel as required. Qualifications: • Experience in technical support in the healthcare technology, or a related field., • Experience with IoT devices, Bluetooth, WIFI and hardware installation highly preferred., • Technical aptitude for managing devices, software, and troubleshooting processes., • High attention to detail, • Organized, proactive, and comfortable working both independently and as part of a team., • Flexibility to travel frequently within the region and adapt to client needs. Travel up to 70% Salary: $65 - $75K DOE Compensation and Benefits: Vitalacy offers an attractive and competitive compensation package including base salary, pre-IPO stock options, health insurance, and a casual office environment.

Swan Analytical USA is seeking a Field Service Technician to join our dynamic team. The Field Service Technician will play a crucial role in ensuring the optimal functioning and performance of our analytical instruments at customer sites. As a Swan Field Service Technician, you will be responsible for on-site installation, maintenance, troubleshooting, and repair of our instruments, as well as competitors, providing outstanding technical support to our valued customers. This role will require up to 100% Travel (Mon-Fri only). Key Responsibilities: • Installation and Commissioning:, • Install and commission SWAN analytical instruments at customer locations., • Ensure proper calibration and configuration to meet customer specifications., • Preventive Maintenance:, • Conduct routine preventive maintenance activities to ensure instruments operate at peak performance., • Keep detailed maintenance records and update service documentation., • Technical Support:, • Provide exceptional technical support to customers via phone, email, and on-site visits., • Troubleshoot and diagnose issues with instruments promptly and effectively., • Repair and Upgrades:, • Perform instrument repairs, replacements, and upgrades as required., • Coordinate with the support admin and manager to source and order replacement parts., • Customer Training:, • Train customers on the proper use, maintenance, and calibration of SWAN instruments., • Offer guidance on optimizing instrument performance., • Documentation:, • Maintain accurate service records, equipment logs, and reports., • Ensure timely submission of service reports and required documentation., • Continuous Learning:, • Stay up to date with SWAN's product advancements and industry trends., • Participate in training programs and workshops to enhance technical knowledge.

Job Description The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: The Position Maintenance Technician - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job Description HVAC Service & Installation Technician (NY/NJ) NOW HIRING: HVAC SERVICE & INSTALLATION TECHNICIAN (NY/NJ) Location: Field-based – New York City & New Jersey Job Type: Full-Time Compensation: Competitive Pay + Overtime + Benefits Ready to Take Your HVAC Career to the Next Level? Join a Growing Team Where Your Skills Matter! We’re a fast-paced, professional HVAC company servicing NY & NJ, and we’re looking for a reliable, skilled, and motivated HVAC Service & Installation Technician to join our crew. If you’re great with your hands, know your way around split systems, rooftop units, and mini splits, and want steady work with real growth potential – read on! Job Responsibilities: · • Troubleshoot, service, and install split systems, rooftop package units, and ductless mini splits · • Perform diagnostic tests and identify system issues quickly and accurately · • Complete installations in both commercial and residential settings · • Communicate effectively with dispatch, customers, and team members · • Maintain clean, accurate service records and complete job tickets · • Drive a company service van (GMC 2500) safely to and from job sites · • Keep tools and vehicle clean, organized, and fully stocked Requirements: · • 3+ years HVAC experience (service + installation) · • Strong knowledge of split systems, RTUs, and mini splits · • Valid driver's license (must be a clean driving record) · • Able to safely operate and navigate a GMC 2500 service van · • EPA certification preferred · • Must be reliable, professional, and customer-focused · • Ability to work independently and as part of a team · • Must be authorized to work in the U.S. What We Offer: · • Competitive hourly pay (based on experience) · • Overtime opportunities · • Weekly pay · • Paid holidays & vacation · • Tools & uniforms provided · • Career growth and advancement opportunities Work Areas: Jobs located across New York City (5 boroughs) and Northern/Central New Jersey Whether you're a seasoned tech or looking to step into a more challenging role, this is your opportunity to grow with a company that values skill, effort, and reliability. Bring your tools, your talent, and your drive – we’ll supply the rest. APPLY NOW! Company DescriptionWe are a fast-growing HVAC service and installation company serving New York and New Jersey. Known for our reliability, top-tier workmanship, and customer-first approach, we specialize in split systems, rooftop units, and mini splits for residential and commercial clients. Our team is made up of experienced, motivated technicians who take pride in doing the job right. We offer competitive pay, consistent work, and a supportive environment where skilled tradespeople thrive.We are a fast-growing HVAC service and installation company serving New York and New Jersey. Known for our reliability, top-tier workmanship, and customer-first approach, we specialize in split systems, rooftop units, and mini splits for residential and commercial clients. Our team is made up of experienced, motivated technicians who take pride in doing the job right. We offer competitive pay, consistent work, and a supportive environment where skilled tradespeople thrive.

Job Description HVAC Installer/Service Technician –Newark, NJ (Remote) Join BGIS Integrated Technical Services (ITS), a global leader in facility management, as an HVAC Installer/Service Technician in Newark, NJ, and surrounding areas. If you’re a skilled HVAC professional, seize this opportunity to grow your career with competitive pay, comprehensive benefits, and a supportive, innovative team. Why BGIS ITS? • Competitive Pay: $31–$42/hour ($64,480–$87,360 annually), • Unique 3&3 Tech Flex Program: Choose $3,500 cash bonus, 40 extra holiday hours, or $3,500 in technical training, • Company-Provided Perks: Take-home vehicle, cellphone, tablet, annual boot voucher, • Generous Benefits: 5% 401(k) match, 48–168 hours PTO, 7 paid holidays, health/life/disability coverage, • Career Growth: Continuous training, clear advancement paths, and global network of 7,000+ professionals As an HVAC Installer/Service Technician, you’ll install and maintain commercial HVAC systems, ensuring peak performance and client satisfaction. Key duties include: • Installation: Perform pipefitting, brazing, and soldering for refrigerant piping; troubleshoot installation challenges, • Service: Conduct maintenance, repairs, and emergency service on HVAC and refrigeration systems, • Collaboration: Work with dispatchers and supervisors for seamless project execution, • Required: 2–5 years HVAC experience, EPA Certification, high school diploma/GED, valid driver’s license, ability to pass drug/background checks, • Preferred: HVAC apprenticeship, Journeyman’s license, or technical training, • Physical: Lift 75 lbs., climb ladders, work in confined spaces, wear PPE, • Provided: Service van, iPad, iPhone, PPE Unlike local competitors, BGIS ITS offers global opportunities, flexible benefits, and fully stocked vehicles, empowering you to excel in a collaborative, innovative environment. Apply Now! Ready to elevate your career? Join BGIS ITS and start your journey with a global leader. Visit BGIS Careers Careers to submit your application today! BGIS ITS is an equal opportunity employer. We are committed to creating an inclusive workplace where diversity is celebrated, and all employees are valued. Our company culture includes a robust mix of sound business practices and employee initiatives that promote personal and professional development, work/life balance, health and wellness and community involvement. The Company is an equal opportunity employer. We believe every employee has the right to work in surroundings that are free from all forms of unlawful discrimination. We are committed to providing equal employment opportunity to all employees and applicants without regard to race, color, religion, gender, national origin, age, disability, ancestry, creed, marital status, sexual orientation, or Veteran or military status, genetic information or any other basis prohibited by local, state or federal law in the relevant jurisdiction. This policy applies to all terms and conditions of employment including, but not limited to employment, advancement, assignment and training. BGIS is committed to strengthening our diversity through recruiting and retaining minority and women professionals from all backgrounds. Our commitment is consistent with our recognition that it is the outstanding people within BGIS who the source of our strength has always been. We recognize that promoting diversity is an integral component of our continuing quest for organizational excellence. This commitment to Equal Employment Opportunity is made equally as a social responsibility and as an economic and business necessity. Anyone with questions or concerns regarding Equal Employment Opportunity should contact their direct supervisor or the Human Resources Department without fear of retaliation of any kind. Company DescriptionBGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. When you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor. Visit us online at for more information.BGIS is a leading provider of integrated real estate management services, including facilities management, project management, energy & sustainability services, strategic workplace consulting, real estate services and capital planning. Its range of solutions, supported by efficient systems, processes and people, enables it to create and optimize places that work for its clients. The team is dedicated to inspiring better business performance and helping clients focus on their core businesses. With over 20 years of experience, we employ over 5,000 skilled professionals and manage in excess of 56 million square meters of property and infrastructure, and delivers services that drive sustainable cost reductions for its clients. BGIS’ s clients benefit from the combined strength, expertise and leadership. \r\n\r\nWhen you join our team, whether as a seasoned professional or a recent graduate, you’re joining an industry-leading company that makes a difference in our communities, drives innovation through best practices and technology, and takes pride in being one of Canada’s Green 30 companies since 2010. We have been recognized by GI Jobs Magazine for Military Friendly 2017 and 2018, along with being the recipient of the 2018 Hire Vets Gold Medallion via the U.S Department of Labor.\r\n\r\nVisit us online at for more information.

Headquartered in Los Angeles, Vitalacy partners with hospitals worldwide, assisting them to improve quality and safety measures. Our mission is to reduce healthcare costs while delivering cutting-edge, AI-driven tools that empower care teams to enhance patient safety. By providing predictive alerts and continuous monitoring, we enable proactive care and improved clinical workflows. Through innovation and collaboration, we strive to create a safer, more efficient healthcare environment for patients and providers alike. Client Technician – New Jersey As a Client Technician, you will serve as the dedicated Vitalacy product expert and technician for a healthcare client in New Jersey. This role blends device maintenance, operations and technical support to ensure long-term client success. Key Responsibilities: • Schedule and conduct regular on-site visits to provide continuing support, including:, • IT coordination, • Bluetooth device calibration, • Signal audits and backend map placements, • Device installation, maintenance, and troubleshooting, • Partner with facility EVS and engineering teams to coordinate access, replacements, and equipment needs., • Provide timely on-site or remote troubleshooting support., • Handle hardware replacement and setup as needed (e.g., dispenser sensors, beacons, SmartBand devices)., • Provide regular updates and participate in scheduled check-ins with the Technician Manager and the broader Operations team., • Travel within a 50-mile radius by car, with flexibility for occasional air travel as required. Qualifications: • Experience in technical support in the healthcare technology, or a related field., • Experience with IoT devices, Bluetooth, WIFI and hardware installation highly preferred., • Technical aptitude for managing devices, software, and troubleshooting processes., • High attention to detail, • Organized, proactive, and comfortable working both independently and as part of a team., • Flexibility to travel frequently within the region and adapt to client needs. Travel up to 70% Salary: $65 - $75K DOE Compensation and Benefits: Vitalacy offers an attractive and competitive compensation package including base salary, pre-IPO stock options, health insurance, and a casual office environment.

Job Description As an HVAC Service Manager, you will be responsible for overseeing and coordinating our service department to ensure the efficient and effective delivery of HVAC services. You will play a pivotal role in managing service technicians, assisting the dispatcher with scheduling, coordinating installations, and maintaining high standards of customer service. Key Responsibilities: • Manage a team of HVAC service technicians, providing leadership, guidance, and support to ensure optimal performance and productivity., • Assist the dispatcher with scheduling service technicians to customer locations for repair, maintenance, and installation jobs in a timely and efficient manner., • Monitor and prioritize service requests, ensuring that customer needs are met promptly and effectively., • Locate and order parts as needed for field staff., • Research and locate service manuals or troubleshooting instruction for a variety of equipment as needed. You will communicate with the field technicians directly and assist them as needed from the office., • Conduct regular performance evaluations of service technicians, providing feedback and coaching to enhance skill levels and job performance., • Oversee the implementation of safety protocols and ensure compliance with industry regulations and company policies., • Handle customer inquiries, complaints, and escalations, resolving issues promptly and professionally to ensure customer satisfaction., • Check technician notes for accuracy at the end of the day and directly communicate with field staff to ensure jobs are properly completed., • Proven experience in HVAC service management, with a minimum of 3 years of experience in a similar role., • Strong technical knowledge of HVAC systems, including troubleshooting, repair, and installation procedures., • Excellent leadership and communication skills, with the ability to motivate and inspire a team., • Proficiency in computer software applications, including Microsoft Office and HVAC service management software., • Solid understanding of safety regulations and protocols related to HVAC service operations., • Exceptional customer service skills, with a commitment to delivering a positive customer experience. Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year Benefits: • 401(k) 4% Match, • Company truck, • Paid time off, • 8 hour shift, • Monday to Friday, • Overtime, • Weekends as needed

Job Description Want a good job where your sales skills help you earn money? Countryside Chimney in Ridgefield Park, NJ, needs a full-time Chimney Technician - Salesperson with experience. Pay: We offer a competitive base salary plus commission, with average earnings ranging from $70,000 to $100,000 annually or more, depending on experience. Benefits: • Bonus structure, • Growth opportunities, • Uniforms SCHEDULE FOR OUR CHIMNEY TECHNICIAN - SALESPERSON: You'll work full-time, usually Monday to Friday. You'll come to our main office first, and then go to different job sites. Most days you'll work from 7 am to 4 pm, but sometimes it might be a little different between 7 am and 5 pm. If you want to work extra hours, that might be possible too. YOUR ROLE AS A CHIMNEY TECHNICIAN - SALESPERSON: You'll start each day at the central office, getting ready for your scheduled client appointments. From there, you'll head out to residential homes to perform detailed inspections, identify any system issues, and clearly explain your findings and recommended solutions to homeowners in a professional, easy-to-understand way. You'll use your sales experience to follow up on estimates and build strong client relationships that lead to closed sales. Throughout the day, you'll need to be comfortable using all necessary service tools and a company-provided tablet for documentation and communication. In order to do this, you'll need the following: Requirements: • Sales experience specifically within the chimney industry, with a strong track record of closing deals, • Expertise in all facets of chimney servicing and repair, including liner installation, rebuilding, and masonry work, • Ability to communicate clearly and professionally with customers, • Valid driver's license, • Competence in using tools and tablets for work-related tasks OUR COMPANY We're a leading chimney and masonry expert in northern New Jersey. We take pride in fostering a friendly and team-oriented work environment where our motivated team can thrive. We are a reliable and reputable company that values our employees, offering competitive compensation and clear pathways for professional growth, including opportunities for leadership roles. Our commitment to our team is reflected in our comprehensive benefits and supportive culture. Join us and build a successful and fulfilling career! JOIN US! Want to join our team and use your sales skills to make good money? It's easy to apply! Just fill out our initial 3-minute application on your phone and tell us why you're the right! Must have the ability to pass a background check and drug screening test. Job Posted by ApplicantPro

Job Description Job Title: Fire Protection Technician Location: Newark Airport Terminal A Department: Facilities Maintenance Job Summary: The Fire Protection Technician plays a key role within the Facilities Management team to support the Fire Protection Systems within Terminal A. The Facilities Maintenance Fire Protection Technician will maintain fire protection systems and be the first investigator for all fire alarms as well as the primary point of contact for both internal and external customers. You will be part of the Munich Facilities Maintenance department operating at Newark Airport Terminal A twenty-four hours a day, seven days a week, and will work within the facilities maintenance department and our contractors to maintain the terminal. Responsibilities: • Perform monthly, quarterly, semi-annual & annual flow testing of fire protection systems and backflow preventors as per NFPA (see below associated NFPA), and perform onsite emergency troubleshooting and repairs of the Terminal A fire alarm and protection systems, identifying code and non-conformance issues:, • Conducting regular inspections and tests of the fire protection systems to ensure they are functioning correctly and in compliance with NFPA standards. You will also perform emergency troubleshooting and repairs as needed, identifying and addressing any code violations or non-conformance issues., • Act as a first investigator for fire alarms/fire protection systems within Terminal A and operate the fire protection and Fire Alarming systems and software when needed:, • This involves being the initial responder to any fire alarms or issues with the fire protection systems. You will assess the situation, determine the cause of the alarm, and take appropriate action to resolve the issue. This may include operating the fire protection systems and FACP to ensure the safety of the terminal., • Strong problem solving and decision-making abilities and able to work well with other team members and the terminal stakeholders., • Read and interpret blueprints, submittals, and operational/product manuals:, • Ability to understand and interpret technical documents, including blueprints, submittals, and product manuals, to effectively maintain and troubleshoot the fire protection systems., • Ensure that work orders for planned FLS maintenance are in place and stakeholders are informed:, • This involves creating and maintaining schedules for planned maintenance activities, ensuring that all necessary work orders completed, and keep stakeholders informed of the status of maintenance activities and deficiencies., • Monitor the CMMS system (Maximo) to ensure all the FLS work orders are completed on time:, • Overseeing the execution of maintenance work orders, receiving and reviewing reports on completed work, and ensuring that all information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, attended to, and resolved as per SLAs, using the standard work order procedures, • Inform, communicate, and collaborate if there is an event needing other stakeholders’ involvement:, • Requires effective communication and collaboration with other stakeholders when an event or issue requires their involvement., • Monitor and oversee that planned and ad-hoc inspections are taking place:, • Includes ensuring that both scheduled and unscheduled inspections and work are conducted as required to maintain the fire protection systems., • Overseeing the performance of Fire Life Safety subcontractors in carrying out planned maintenance and reactive management activities and coordinating with management to address any issues or concerns., • Monitor all FLS KPIs and SLAs for compliance:, • This involves tracking key performance indicators (KPIs) and service level agreements (SLAs) to ensure compliance with established standards and performance metrics., • Prepare documentation for events for pre and post stakeholder meetings, • Issue shift/daily reports as required:, • This involves preparing and issuing reports on a daily or shift basis to provide updates on maintenance activities, issues, and performance metrics., • Monitor Cerberus Danager Management System & Building Management System(s) status and take appropriate action to address any received faults through management of corrective work order:, • This involves monitoring the status of the Fire Alarm Software & Building Management Systems (BMS, SCADA and taking appropriate action to address any faults or issues that arise, including issuing and managing corrective work orders., • Perform building inspections including facilities maintenance and life safety audits., • Shift work required and will cover other shifts for PTO/vacations, as required:, • This requires flexibility to work different FM positions and shifts as needed, including covering for other team members during paid time off (PTO) or vacations.Qualifications:, • NICET Level II/NICET Level III Certification is preferred., • Familiarity with NFPA Requirements for Fire Protection & Life Safety Systems., • Minimum of 3 years of experience in the testing, inspection, and maintenance of fire sprinklers/clean agent, fire extinguishers, and related equipment., • Back-flow certification is preferred and must be able to obtain S12, S13, and S14 certification within the first six months if you don’t already have it., • Be able to sit, stand, walk, bend, climb stairs for extended periods, and lift at least thirty (30) lbs., • Possess a GED, high school diploma, or equivalent. 1. Fire Alarm & Detection Systems • NFPA 14 – Standard for the Installation of Standpipe and Hose Systems, • NFPA 15 – Standard for Water Spray Fixed Systems for Fire Protection, • NFPA 25 – Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, • NFPA 291 – Standard for Fire Flow Testing and Marking of Hydrants3. Special Fire Suppression Systems, • NFPA 17 – Standard for Dry Chemical Extinguishing Systems, • NFPA 17A – Standard for Wet Chemical Extinguishing Systems (Common in kitchen suppression systems.), • NFPA 30 – Flammable and Combustible Liquids Code (Includes fire protection requirements for liquid storage.), • NFPA 96 – Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations (Covers kitchen hood suppression systems.), • NFPA 2001 – Standard on Clean Agent Fire Extinguishing Systems (Covers FM-200, NOVEC 1230, and other gas-based suppression systems.)4. Portable Fire Extinguishers, • NFPA 72 – National Fire Alarm and Signaling Code (Also listed under Fire Alarm Systems.) Powered by JazzHR abh1DYYlpl

Job DescriptionCompany: Probo Medical Job Title: Mechanical Installation Service Technician Location: Newark, NJ + travel Probo Medical is a diagnostic imaging sales and service provider that delivers high-quality, affordable healthcare products and services to medical practices around the world. With locations that span across the US, Canada, the UK, and parts of Europe, we’ve made it our mission to increase access to life-saving healthcare services for patients worldwide. We empower our teams to solve problems together and build long-lasting relationships with our customers. Establish your purpose-driven career as a Mechanical Installation Service Technician with Probo Medical. You won’t find a more dedicated team of industry professionals to work and grow with. What You’ll Be Doing Mechanical Installation Service Technician work activities may include the coordination and installation, de-installation, relocation, and/or service upgrades of high-value complex equipment in hospitals, universities, and Federal Buildings. Various equipment from each modality may include, but is not limited to, X-ray, CT, MRI, Cardiovascular, and NucMed, and other related technical systems associated with these modalities. Travel Requirements Up to 100% travel throughout the U.S. Frequent travel by car to project sites within 1-2 hours’ driving distance from a project site is required. Overnight travel and air travel to project sites within the assigned territory may be scheduled as business needs require. Pay Range: Typical starting pay is $22-$24 per hour. This range may vary and is based on several factors, including but not limited to geographic location, work experience, education, certifications, etc. Overtime is available. Essential Duties and Responsibilities: • Represent Probo Medical and the customer professionally and courteously while building and maintaining customer relationships., • Become knowledgeable in high-value, complex biomedical equipment., • Follow all Standard Operating Procedures and policies, customer requirements, and statutory and regulatory guidelines., • Assist the Team Leader with coordinating suppliers and help direct on-site deliveries of equipment., • Perform and deliver a safe and timely installation to the customer., • Assist the Team Leader with quality and compliance, customer requirements, and ISO 9001. Ensure each process is followed by each team member., • Maintain the integrity of confidential information. We welcome candidates with electro-mechanical knowledge, mechanical troubleshooting skills, and power tool experience, and those with 1-2 years of related education and experience who are seeking to grow their skills. New graduates are welcome to apply. We train those who are eager to learn! Additionally, we seek: • An associate's degree (A. A.) or equivalent from a two-year university or technical school is preferred., • A high level of patience, attention to detail, and adaptability., • Self-starter able to work as a team and independently without much oversight., • Ability to prioritize assignments and effectively communicate timelines and workload., • Solid communication and interpersonal skills. Must be able to read, write, and speak English fluently., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Knowledge of how to compute rate, ratio, and percentage, and draw and interpret bar graphs., • Ability to add, subtract, multiply, and divide in all Metric and Standard units of measure and use leveling methods to complete related work activities., • MS Office proficiency (Word, Excel, Outlook)., • The use of both hands and fingers with dexterity., • Great hand/eye coordination and ability to work on a ladder., • Must be able to lift up to 75 lbs. of cables or equipment. Our Total Rewards Offering Probo Medical offers a competitive compensation and benefits package, coupled with excellent career development opportunities and a challenging and team-oriented work environment to help you succeed in your career. Visit us at probomedical.com to learn more. If you have a passion for hands-on work, solid mechanical problem-solving and troubleshooting skills, and enjoy being part of a high-growth company that strives for excellence and making a difference in people’s lives, we would like to meet you! Apply Today! We Make it Easy Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees. As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce. We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter. Powered by JazzHR VQ55AF6NsE

Job Description Seeking hands-on, organized and detail-oriented individuals to join our system installation team. This position is best suited for technically oriented individuals with outstanding mechanical abilities and strong work pride. As an electronic technician, you will work in small groups installing CAT5E/6,fiber data cables, perform cable terminations, install/align radios, perform test and other communication system infrastructure. In this position, you come to our office in South Hackensack, NJ in the morning. At our office, you meet with other teams members and then travel in one of our company vehicles to our various projects in the NYC area. At the end of the day, your team will arrive back at our offices. This full time position is a 10 hour/day - 4 day work week --- Thursday to Sunday. This work schedule enables a 3 day weekday, which many enjoy. Training provided for qualified candidates as well as installation tools. Position Requirements: • Comfortable working with hand and power tools, • Ability to pull/run CAT5E/6 data and Fiber cables, • Climbing and lifting in indoor and outdoor conditions, • Available for weekend shifts, • Experience with Category 5/6 data cable installation, • Professional attitude and appearance, • High School diploma, • Prior Technical Schooling/Training (i.e., Lincoln Tech, etc.), • Hourly Paid Salary - clock starts when you arrive/return to our office, not to/from job site, • 4 Day work week – Thursday to Sunday (4 10 hours days - 40 hrs/week), 3 day weekend, • Career Path Available, • Paid Overtime, • Paid Holidays, • Paid Vacation (10 days) and PTO (7 days), • Medical Insurance Salary: $20-25/hr Willingness to travel: Powered by JazzHR L1HRq4DLOq

Job Description Leading Audio/Visual Company seeks technician with good customer service and audio video skills. Individual should have Associates level college degree in a technology related field and/or minimum 5 years of previous employment with installation responsibilities in the AV industry and a knowledge of integrated conference room technology and a minimum of 3 years experience as a lead technician. Our corporation is looking for an individual who possesses a full understanding of all areas of the A/V field including but not limited to: • Excellent termination, cable management and organizational skills, • Ability to read and follow AV system flow diagrams and support documentation, • Ability to install, operate and service most AV equipment and systems, • Projection systems / display devices, • Crestron / AMX control systems, • Switching / routing / interfacing technology, • Excellent interpersonal skills, accuracy and attention to detail, • Proficiency in running a project site, installs and leading a crew of technicians, • Ability to work outside regularly scheduled hours a plus, • Ability to operate power tools, lift heavy loads and work at heights using ladders and/or scaffolding, • Technical AV certifications such as CTS, Crestron DMC-D, • Proficiency in the use of personal computers including such programs as MS Word, Excel and Outlook. All of the below may be performed and reviewed prior to possible employment. • Background checks, • Drug screening, • Finger printing

Job Description Job Description: We are searching for a building automation control technician who is responsible for installing, commissioning, and programming building automation systems and components. This role includes evaluating the performance of building controls and HVAC systems, ensuring meticulous documentation, and managing DDC control start-up tasks. The position also involves collaborating with clients and electrical installers to ensure seamless system integration. This opportunity is open to Apprentice Level 1, Intermediate, and Expert-level technicians. If you are a Controls Technician with installation and construction experience in building automation systems, you are encouraged to apply to this ad for consideration. We look forward to reviewing your experience and speaking with you soon. Key Responsibilities: • Conduct installation and commissioning activities, including control system setup, network configuration, and equipment integration, • Program and configure DDC controls and building automation systems, • Collaborate with project managers and installation teams to complete projects on time and within budget, • Troubleshoot and resolve installation issues related to DDC control and mechanical systems, • Ensure all installation activities are performed according to project specifications and industry standards involving Building Automation Controls installation and service, • Maintain thorough and accurate documentation of installation processes and project progress, • Communicate regularly with the team (supervisor, project coordinator, account managers) and clients, • Comprehensive understanding of HVAC DDC Control Theory & Applications, • Proficiency in Alerton programming, • Proficiency or certifications in Alerton, Distech, Siemens, JCI Metasys, or Tridium are highly sought after, • Familiarity with electronics and basic electrical circuits, • Exceptional troubleshooting capabilities, • Proficiency in computer hardware and software, • Ability to work autonomously without constant supervision, • Effective communication and interpersonal skills, • AA degree in applied technology (preferred)., • Alerton, Distech, Siemens, JCI Metasys, or Tridium certifications are highly preferred, • Alternatively, a combination of relevant education and experience, • Prior experience with HVAC and/or mechanical systems in building automation systems, • Computer programming experience is a plus, • Competitive pay of $80k - $120k, dependent on experience and certifications, • Company vehicle, • Medical + Dental + Vision, • 401K + company match Joining our team means becoming part of an Employee Stock Ownership Plan (ESOP) company. If you're unfamiliar with an ESOP, you're not alone fewer than 7,000 companies in the US offer this unique benefit. Working for an ESOP is a life-changing opportunity because our benefits extend to every single employee-owner. This means that when you contribute to our success and go the extra mile to satisfy our customers, you directly share in the growth and prosperity of the company. Our ESOP empowers you to take pride in your work and enjoy the financial rewards of our collective achievements.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Senior Applications Engineer. This role provides advanced expertise to installation and service teams, ensuring seamless interoperability across complex security platforms and enterprise applications. The Senior Applications Engineer will drive high-level troubleshooting, custom programming, system commissioning, software upgrades, and advanced diagnostics. Candidates should bring deep proficiency with integration tools, the ability to implement tailored software interfaces, and a proven track record of delivering scalable, secure, and high-performing solutions. Salary Range: $100,000 - $135,000 annually RESPONSIBILITIES: • Design and oversee advanced security system integrations to deliver cohesive, enterprise-level solutions., • Configure LAN (Local Area Network) and wireless network infrastructures to optimize connectivity, system reliability, and performance., • Lead advanced diagnostics and root-cause analysis to ensure peak system functionality and long-term stability., • Partner strategically with Project Managers, End Users, and Technical Teams to guide successful software deployment and utilization., • Resolve complex project-related software and system issues, coordinating with cross-functional technical resources as needed., • Direct escalation protocols, ensuring critical issues are communicated and mitigated promptly to minimize business impact., • Advise and coordinate with leadership to drive efficient timelines, effective resource allocation, and scalable project execution., • Oversee and schedule software licensing, compliance, and advanced training programs to foster continuous professional growth across teams., • Develop and lead end-user training strategies, ensuring seamless software adoption, optimized system operation, and enhanced client satisfaction. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of three (3) year of experience programming and troubleshooting access control and video systems, • Advanced knowledge of industry-leading security system and equipment providers, working with enterprise level clients or large projects, • Product specific certification(s) with access control systems and video platforms, such as AMAG, Lenel, Milestone, Genetec, SoftwareHouse, • High level decision-making and complex problem-solving ability to develop innovative solutions that align with organizational strategy, • Expert ability to interpret, evaluate and apply advanced technical documentation, ensuring systems and solutions meet enterprise and client requirements, • Advanced proficiency with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Exceptional verbal and written communication skills, with internal and external stakeholders, • Ability to establish and maintain trusted partnerships across executive leadership, technical teams and client organizations PREFERRED QUALIFICATIONS (NICE TO HAVE): • Salary Range: $100,000 - $135,000 annually, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1441056

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Utility Technician will operate various Class A, B, and/or C vehicles (pumper truck, P&D truck, fence truck, container truck, etc.) in support of the operation's needs Responsibilities: • Conducts daily pre-shift & post-shift vehicle inspection & report deficiencies to shop immediately., • Also, report improper operation, faulty equipment, and unusual conditions to the Operations. Manager., • Operates service truck to and from pre-designated work sites based on daily routing information., • Services portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines., • Notifies management of any issues encountered on back-up route assigned., • Maintains telephone or radio contact with dispatch to receive additional instructions, changes to work locations, etc., • Maintains truck log according to state and federal regulations., • Follow all established safety rules & regulations., • Operates flat bed truck to and from pre-designated work sites based on daily routing information to deliver or pick-up portable restroom units, hand sinks, holding tanks or containers., • Updates tickets with relevant delivery or pick-up detail., • Operates fence truck to and from pre-designated work sites based on daily routing information to deliver or pick-up fence (chain link, panel, materials, etc.), • Will also act as a lead on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment., • Operates tanker/transfer truck to and from local dump and completes required paperwork as necessary., • Special projects as assigned by management. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $25.08 – $35.12 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Trim Carpenter / Cabinet Installation Technician.Kitchen Tune-Up is seeking a skilled Trim Carpenter / Cabinet Installation Technician to work on kitchen remodeling projects in Bergen County.Kitchen Tune Up is a fast growing, locally owned kitchen remodeling company that is part of a national franch

Hunt - JobID: 00602466 [Installation Technician] As an Installation Technician at J.

Must have prior, successful experience as an Installation Technician in the HVAC industry. This person has to be able to run a job, and complete the installation of HVAC systems in a residential and light commercial setting. Installs residential and light commercial HVAC systems.

The Audio-Visual Integration Technician is responsible for (1) pulling and terminating cables; (2) understanding cable flow and installation; (3) install equipment and wall rack equipment reading wire diagrams: and (4) programing proprietary equipment for the Company’s clients.Essential Duties and

Job Summary The Audio-Visual Integration Technician is responsible for (1) pulling and terminating cables; (2) understanding cable flow and installation; (3) install equipment and wall rack equipment reading wire diagrams:. Installation of cameras Identify cable types including, but not limited to:.

Job DescriptionBenefits: • Company parties, • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development JOB SUMMARY This person has to be able to run a job, and complete the installation of HVAC systems in a residential and light commercial setting. JOB DUTIES • Installs residential and light commercial HVAC systems, • Have the ability to install, and adapt the new system to existing ductwork, • Always maintains a neat work area and inspects that area for cleanliness after completion of each job, • Conveys a safety-conscious attitude, both on the job and while driving, • Wears floor savers while in the clients home, • Maintains company vehicle, ensuring that it is always cleanMINIMUM REQUIREMENTS, • High school diploma or equivalent, • Must have prior, successful experience as a Installation Technician in the HVAC industry, • NATE certification preferred, • Must display strong communication skills and technical competence, • Valid driving license

Job Description We are looking for Awning installers to join our team in the greater North Jersey area. Does this sound like you? * Detail oriented * Focused on accuracy * Pride in being technically precise * Ability to think and plan ahead to be prepared to get the job done * Ability to figure out solutions to complex challenges * Task driven * Most comfortable working at a steady pace, with time to do the job right * Dedicated to getting the job done right * Knowledgeable about tools, basic construction * Comfortable working on a ladder If you are someone who likes a challenge, enjoys being part of a team, and is a stickler for the details, then we’d love to hear from you. Company DescriptionGreat Personality - Go Getter Attitude and Hard WorkingGreat Personality - Go Getter Attitude and Hard Working

Job Description Join the Green Revolution: Install Biophilic Art with Garden on the Wall® Be a Part of Creating Spaces That Matter & Shape Environments That Nourish Both Planet and People Your Opportunity: An Artisan for the Earth & Soul Are you inspired by the artistry of nature and have a knack for sculpting, set design, or handcrafting? At Garden on the Wall®, we're not just crafting gardens; we're fostering a sustainable future and enhancing human well-being. We are seeking individuals passionate about turning green inspiration into tangible art. Your Role: Join the Team for Installing Nature's Masterpieces As a "Preserved Garden Installation and Touch-Up Technician", you will play a pivotal role in our unique market we lead, bringing digital designs to life, bring the preserved plant art panels to create stunning, awe-inspiring biophilic art installations, and installing them in unique spaces across the US. This is your chance to immerse yourself in transforming spaces with art that is kind to both the planet and its habitants. You will be part of a team that breathes life into preserved gardens for a greener, more vibrant world for top architecture and design clients, including Fortune 500 companies. From studio crafting to on-site installations, you will ensure each biophilic art piece perfectly complements its space making it a better place for the occupants. What You Will Accomplish: • Hands-On Training: As preserved garden installations are new in the US, we don't expect you to know everything from the start. We will provide comprehensive training in our specialized fabrication and installation techniques., • Travel and Install: Our crafted garden panels, brought to life in our Fairfield workshop, travel across the US. You will be part of the team that installs these panels in various locations, transforming spaces into green sanctuaries., • Active and Engaged Work: This role requires you to be on your feet and hands-on. It’s about being present, meeting deadlines, and creating installations that not only look beautiful but also enhance the mood and atmosphere of a space., • Passion for environmental stewardship and thriving in hands-on environment., • Artistic flair and creativity with deep understanding of scale, textures, and layouts., • Background in sculpting, set design, or relevant art forms., • A genuine love for nature and experience with plants., • Professionalism, punctuality, and the ability to work under pressure., • Agility in dynamic, fast-paced settings., • Commitment to safety and established procedures., • Strong work ethic to fit in to a busy, hard working environment., • Versatility in craft and problem-solving, and able to keep calm in challenging situations., • Ability to work autonomously and as a team player who contributes to our well-oiled, collaborative environment., • Detail-oriented with strong time management., • Enjoyment of travel, and carpentry basics., • A Valid Driver’s License, and comfort with travel., • Individuals who find satisfaction in seeing their art appreciated and enjoyed by others. As a family-oriented women-owned business, we champion work-life harmony, value and support personal growth and wellness. We offer a nurturing and collaborative environment contributing to impactful projects with plenty of bragging rights. The benefits and perks are including but not limited to; • Comprehensive Medical, Dental, Vision Insurance, • Retirement Savings Plan (401K and 401K matching policies), • Comprehensive ancillary insurance options (Short and Long Term Disability, Life Insurance), • Paid time off, flexible work schedules, 12 days company holidays, and commuter benefits, • Per Diem travel allowance for out of State travels, and company vehicle use for shorter travels., • Strong collaborative culture with opportunities for personal and professional growth in a green focused company., • A supportive, inclusive, pet-friendly environment, with well-stocked snack bar and hot/cold drinks, • Flexible health spending account, free online courses, employee discounts through ADP, • Diversity & Inclusion Initiatives We're more than a company; we're a community dedicated to creating spaces that are visually stunning, environmentally responsible, and human centric. We grow people, dreams, and success stories. This is more than a job; it’s a career where your work creates a lasting impact on the spaces and people around you. We’re committed to supporting your journey and celebrating achievements. If you're ready to make a difference with your artistic skills and join a team that values creativity and collaboration, Garden on the Wall® is your next step. Candidates with a background in Arts, Landscape Architecture, or related fields are encouraged to apply. Please include your project examples or a portfolio with your application. Garden on the Wall®: Where Your Artistry Meets Our Green Vision About Garden on the Wall® - Pioneering Green Elegance in Interior Spaces Where Nature Meets Artistry At Garden on the Wall® (GOTW), we're not just crafting green walls; we're reinventing the essence of biophilic design for modern interiors. Our journey began with a vision to transform biophilic design from a rarity to a staple in sustainable architecture, particularly in indoor settings. Today, GOTW stands as a beacon of this transformation, pioneering the use of preserved plants to bring maintenance-free, vibrant gardens into a myriad of indoor spaces. No wonder we’re called “Kleenex of Wall Gardens”! Innovative and Sustainable at Heart Our unique vertical gardens are not just visually stunning; they embody the pinnacle of sustainability and innovation. We meticulously select plant species, preserving them at their freshest point, resulting in lush, enduring installations that require no water, light, or soil, yet maintain their beauty for 10-12 years. Our commitment to excellence is reflected in every aspect of our work, from design renderings and fabrication to installation and meticulous touch-ups. Collaborating closely with architects, interior designers, and contractors, we ensure a seamless, 'turn-key' experience for every project. GOTW’s 3rd party tested sustainability, transparency, safety, health, and well-being standards are unmatched in the world. Award-Winning Excellence Our dedication to quality and innovation has not gone unnoticed. Over the past 11 years, GOTW has been honored with multiple prestigious awards, including the Interior Design Best of Year Awards (3 times) Architizer A+ Awards in both Jury and Popular Choice categories (5 times), and the coveted Best Product of the Year Award by The Architects’ Newspaper. These accolades are a testament to our standing as an industry leader, innovator, and thought leader of this very specific market we pioneered 10 years ago. A Vision of Symbiosis In the heart of our founders’ vision lies a profound belief in the synergy of Sustainability and Biophilia. We see these philosophies as intertwined paths leading to a harmonious coexistence between humans and nature, enhancing the well-being of both. As pioneers of this green movement, we are committed to setting the bar high with our impressive, 3rd party verified Sustainability Credentials, leading the way in green architectural standards. Crafting the Future of Green Architecture The future we envision at Garden on the Wall is one where nature and architecture merge to create serene, biophilic Zen moments in every indoor space. We're excited to lead the market with our exquisite Nature Installations, each a testament to the calming, rejuvenating power of indoor greenery. Company DescriptionWe're more than a company; we're a community dedicated to creating spaces that are visually stunning, environmentally responsible, and human centric. We grow people, dreams, and success stories. This is more than a job; it’s a career where your work creates a lasting impact on the spaces and people around you. We’re committed to supporting your journey and celebrating achievements. If you're ready to make a difference with your artistic skills and join a team that values creativity and collaboration, Garden on the Wall® is your next step.We're more than a company; we're a community dedicated to creating spaces that are visually stunning, environmentally responsible, and human centric. We grow people, dreams, and success stories. This is more than a job; it’s a career where your work creates a lasting impact on the spaces and people around you. We’re committed to supporting your journey and celebrating achievements. If you're ready to make a difference with your artistic skills and join a team that values creativity and collaboration, Garden on the Wall® is your next step.

Job Description Kitchen Hood/Exhaust Cleaning Technician - Third Shift Challenge yourself and grow with the Nelbud family. Certified technicians are preferred, and will receive premium pay. Entry-level technicians are welcome to apply. We will train you. What is Kitchen Exhaust Cleaning? This is a very physically demanding job that has great growth potential. Our technicians climb inside of the hood systems as well as climb on the roof with pressure washers to ensure the entire system is free of all grease. * Degreasing commercial hood systems * Power washing of kitchen exhaust hood systems, ductwork, hood filters and more * Clean rooftop exhaust fans and surrounding areas * Installation of auxiliary items including; access panels, hinge kits, and grease containment systems * Provide exceptional customer service while proudly representing NELBUD What's in it for you? * Growth – Start or Expand your career with us. Internal promotions are the Nelbud way. * Generous PTO – plus 8 observed holidays * Continuous safety training and development training - We will teach you and get you certified * All-around health benefits/insurance– health, dental, vision, and life * 2nd Chance Company - we give opportunities to hard-working individuals who just need a chance * Access to your money sooner with our Pay on Demand benefit! What do you need to become a Kitchen Exhaust Cleaning Tech? * Ability to work overnight with varying shift times - Shifts can start as early as 5 pm and as late as 12 am * Ability to access and tolerate small spaces and work in high places * Ability to endure all weather conditions - a portion of each shift is outside on rooftops * Physically demanding position - you will be on your feet, climbing ladders, and using heavy equipment * Strong work ethic - dependable, reliable, and trustworthy * A MINIMUM of 40 hours a week availability What do you need to be considered for a driving position? * Valid driver’s license is required – company truck provided from shop to job site * You must be at least 20 years old * A minimum of 3 years of driving experience is required We love what we do. We know you will, too. By leveraging technology and the talents of our world-class staff we are changing the way people think about their career! Come visit us at Only qualified candidates will be contacted. Please keep an eye on your email.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations Pm0aV54PV9

Job DescriptionDescription: Atosa USA, Inc is a major manufacturer of commercial kitchen equipment, including everything from refrigeration, cooking equipment, to robotic fryers and more. For 10 years we have made a name for ourselves within the industry as a company that leads in innovation, in quality, and great service. Our company has an unyielding commitment to the society in which we operate and offers gratifying careers to self-motivated and talented individuals that can help us grow and set new standards in our field. We are actively recruiting the best and brightest candidates to join our company, and as a young and fast-growing company, we are presently searching for a new member to join our team. Job Description The Field Service Technician is responsible for troubleshooting, diagnosing, and repairing commercial kitchen equipment in the field while delivering exceptional customer service. This role involves installing, inspecting, and servicing Atosa products within a designated territory, ensuring that equipment operates efficiently and reliably. The technician will also document and communicate issues, solutions, and complete repairs, serving as a key liaison between the company and its customers. Strong technical skills, problem-solving abilities, and a commitment to customer satisfaction are essential for success in this role. What’s in it for you • We offer competitive compensation and a comprehensive benefits package, including medical, dental, vision, paid time off, and a 401(k) plan., • Receive company-provided cell phone, tools, equipment, and uniforms., • You will be assigned a company vehicle along with a gas card., • Enjoy a flexible work schedule and the opportunity for monthly bonuses., • Unlimited overtime opportunity.Requirements:, • Familiarize yourself with Atosa's products, monitor new offerings and equipment design changes., • Inspect, test, diagnose, troubleshoot, and repair damaged equipment., • Safely operate company service vehicle to travel to various customer locations as scheduled for service repairs., • Manage customer appointments, providing ETAs and updates to dispatch representatives., • Maintain inventory of all tools, equipment, and other such assets assigned by the company., • Effectively and professionally communicate through phone and email, fostering strong relationships with customers, colleagues, sales representatives, fellow technicians, and others as needed., • Ensure timely submission of all essential paperwork for completed service repairs, invoices, payments, and requested documentation via approved systems., • Self-motivated, capable of both independent and collaborative work., • Exceptional customer service, interpersonal, and simplified technical communication skills., • Ability to comprehend and interpret diagrams and specifications related to HVAC service and installation., • Proficiency in computers, operating systems, and applications., • Familiarity with necessary tools of trade, adhering to safety protocols., • Environmental Protection Agency (EPA) Universal Certification.

Job Description Arabica Coffee Company has been an industry leading coffee roaster based in Bergen County for over 30 years. We are committed to supplying the highest quality product and offering unparalleled service and support. We are currently hiring a Field Service Technician to join our growing team. As our Field Service Technician, you will be responding to service calls for coffee and espresso machines. You will be responsible for diagnosing various types of coffee machine malfunctions and repairing them on-site at our customer's premises. Technical experience is encouraged, but training can be provided for a candidate with the desire, motivation and skill set to learn. Those with experience in the hospitality industry, and who exhibit strong mechanical skills or aptitude, are encouraged to apply. Responsibilities include, but are not limited to: • Installation and removal of equipment, • Diagnosing and resolving mechanical issues with coffee and espresso equipment Operating Hours Are Between 7:00AM and 3:00PM, Some overtime may be required. Must be available to be on call 1 Weekend per month between 7:00AM and 4:00PM

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. What You Will Do Are you an experienced Field Service Technician? Do you have experience working with Fuel Dispensers and Point of Sale equipment? If so, apply to be a part of the OWL team today! Our Field Service Technicians complete tasks including hanging hardware (repair and/or replacement) and mechanical/electrical issues with both fuel dispensers and point of sale equipment. You must be willing to learn about other systems within the properties to assist in general maintenance needs. What We Offer You! • Competitive Compensation Package including benefits eligible on day one of employment., • Weekly Pay!, • 8 Paid National Holidays and 2 floating holidays to use at your discretion for a total of 10 per year!, • Travel per diem for traveling positions., • Flexible Paid Time Off, • 401(k) with Company Match up to 4%!, • Health, Dental, and Vision Insurance – Eligible on day one of employment!, • Health Savings Account (HSA) and Flexible Spending Account (FSA) to support you and your dependent’s medical expenses., • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP) Perform petroleum equipment and EV Charging service and installation calls in a professional, timely, and quality manner. • Complete job paperwork for each service call, at the time of service., • Complete training courses in a timely manner to maintain current certifications and equipment knowledge., • Act as a resource for customers; aid and product support to maintain long term relationships., • Juggle multiple tasks in a fast-paced ever-changing work environment., • Communicate skillfully and effectively in person or over the phone., • Minimum 2 years of experience as a petroleum service technician., • High School Diploma or GED, • Positive Attitude, • Attention to Detail, • Minimum of 2 years’ experience or schooling in a Mechanical, Electrical, or Computer Trades, • Proficient in Microsoft Office Suite, • Written and verbal communication skills, • Willingness to work in all varied weather conditions., • Willingness to travel with the possibility of overnight jobs., • Experience with Point-of-Sale installation and repair required., • Experience working with Wayne or Gilbarco Dispensers is a plus., • Experience working with Verifone a plus., • Experience in computer networking a plus., • Clean driving record and the ability to work safely required., • Capable of lifting and caring equipment weighing up to 75 lbs.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1138B - Wayne, NJ

Job Description The Service Technician is accountable for troubleshooting malfunctioning or disabled automated, anti-vehicular barrier and bollard equipment to determine root cause of malfunction or failure and taken appropriate action to return the equipment to operational condition. The Service Technician is accountable for performing preventative maintenance procedures on same equipment as detailed by the original equipment manufacturer. The Service Technician is accountable for providing oversight of equipment installations and commissioning same equipment for proper initial customer utilization Essential Accountabilities: • Troubleshoot to root cause and repair customer’s barrier, gate and bollard equipment to ensure product performs as intended on a reliable basis utilizing only approved replacement parts, • Perform detailed and comprehensive preventative maintenance procedures on customer’s barrier, gate and bollard equipment as recommended by original equipment manufacturers, • Complete all preventative maintenance checklists, service tickets and time sheets completely and accurately; forward to office, administrative staff within 24 hours of performance of work, • Provide detailed estimates of required repairs when requested by customer representative to facilitate expense approval process, • Provide comprehensive and detailed assessment to Service Manager and Sales Manager of equipment that has reached end of life and should be replaced; provide similar feedback to customer representatives and notate on service tickets, • Oversight of an equipment installation ensuring all requirements of drawings and specifications have been met and/or satisfied, • Receive and Respond to Requests Equipment Maintenance and Repair, • Arrive at Service Office every day in preparation for day’s assignment unless directed otherwise, • Turn-in previous days paperwork including service tickets, timesheets and parts request forms and replace components, • Engage Service Manager, Service Coordinator or Lead Technician for review of day’s service call-outs and scheduled PMs, • Advise leadership of any gaps in capabilities due to parts or equipment required for specific call-outs or PMs, • Ensure assignments include point-of-contact, POC, for given facility, • Load up service vehicle with any required parts or resources not already on hand in service vehicle, • Proceed to customer site, • On call requirement for emergency repairs (rotation schedule is set up between the technicians for emergency repairs that are requested on weekdays after regular schedule hours and/or during weekends), • Initiate Customer Engagement, • Upon arrival on site ensure adequate, legal parking is provided or advise customer and office of inadequate parking, • Make initial contact with provided POC or their agent, • Confirm nature of service call, equipment detailed in call-out and working restrictions/times with POC, • Proceed to equipment site(s), • Execute Service or Repair Procedures, • Assess equipment behavior for repair needs or prepare fresh copy of PM checklist, • Effect repairs or perform preventative maintenance procedures, • Fill out PM checklists as procedures are executed, • Review all basic equipment functions to ensure equipment is returned to customer control in proper working order, • Make list of additional needs if required parts or tools/resources are not available and second call is required, • Complete Paperwork and re-engage POC, • Complete service ticket and/or ensure PM checklists are properly completed, • Review executed activities via paperwork with POC, • Gain POC signature on Service Ticket and legible printout of POC name, • Leave copy with POC or advise POC when copy will be forwarded, • Provide Oversight and Commissioning at a New Equipment Installation, • Ensure third party partners, suppliers or contractors have installed equipment per drawings and specifications., • Identify and communicate in installation details that are not per same drawings and specifications to third parties and leadership staff, • Commission new equipment installation via verification of all system functionality and designed and specified via site specific sequencing and execution parameters, • Report any details of functionality that does not conform to site specific requirements to Engineering and Leadership personnel, • Validate corrective action rectifies shortfall previously communicated Key Performance Parameters and Metrics: • Execute service calls in timely manner in line with existing labor standards, • Turn in all paperwork within 24 hours of performance of work without exception, • Advise Service Leadership of possible improvements to products, processes or work procedures, • Provide feedback to Service and Sales Leadership of possible equipment replacements, • Installation oversight effectively guarantees conformance to all drawings and specifications, • Equipment commissioning demonstrates comprehensive equipment conformance to intended sequencing, • Required Knowledge, Skills, and Abilities:, • Must be able to troubleshoot and repair hydraulic and electromechanical equipment including electric and electronic controls, • Must have baseline understand of electrical principals such as Ohm’s Law and how motors function, • Must have baseline understanding hydraulic principals such as force multiplication, pressure, volume and cavitation, as well as, how pumps, valves and accumulators function, • Must understand basic operating principals of programmable logic controllers and variable frequency drives; must be able to revise functional parameters of variable frequency drives, • Must have basic understanding of how vehicle detection loops function and how to troubleshoot loop/loop detector failures, • Must have good verbal skills and be able to interface directly with customers to explain basic equipment function, repair and maintenance procedures and a sequence of operation, • Must have good written communication skills to complete necessary paperwork for business execution including timesheets, service tickets and parts request forms; handwriting must be legible, • Must be able to utilize basic computer and tablet software for equipment interfacing and paperwork in lieu of hand written pieces, • Must be able to lift 50 lbs. or more repeatedly, • High School Diploma, • Minimum 3-5 years field service experience in electrical, hydraulic or mechanical machine repair, • Computer training preferred, • Electrical training/PLC/VFD training preferred, • Previous experience reading and interpreting civil and electrical drawings to confirm proper conformance Traits/Competencies required • Good Communication Skills, • Self-motivated and able to manage time, • Attention to detail, • Troubleshooting skills/fault isolation and identification, • Moderate Electrical Aptitude, • Moderate Mechanical Aptitude, • Moderate Hydraulic Aptitude, • Basic Civil Engineering Aptitude, • Competency reading basic civil and electrical drawings and validating conformance Job Location Kearny, NJ

Job DescriptionAbout us: BROAD U.S.A. is a privately held company headquartered in Hackensack New Jersey. Relying on our innovative and environmental-friendly technologies, BROAD U.S.A. supplies non-electric central air conditioning powered by hot water, steam, waste/process heat or natural gas. We are committed to optimizing energy efficiency for clients in Commercial, Industrial and Government markets, and to greatly reducing our customers’ carbon footprint. BROAD also specializes in Air Purification, Filtration and Ventilation (ERV) systems. About the role: We are seeking an HVAC Field Service Technician to service HVAC equipment and systems for maintaining cooling, heating, and ventilation to buildings and facilities throughout but not limited to the New York Tri-State area. Responsibilities: • Perform preventative maintenance, diagnosis and repair for HVAC system, • Provide technical support for new chiller installation, startup and commissioning, • Demonstrate and train customers how to use their system properly, • Create and build strong relationships with customers, provide remarkable service, and surpass customers’ expectations, • Communicating with customers and managers regarding service findings is essential, ensuring customer satisfaction., • Keep track of service calls, • Represent the company by serving as the direct customer contact for our products and equipment, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location., • Display team effort and dedication to customer by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight work, • Keep the management team in loop about customer’s satisfaction, any potential sales opportunities and any recurring problems, • Other tasks as assigned, • Possess and respect a safety-first attitude Qualifications: • US work authorization, • A High School Diploma or equivalent is required, and typically 2 plus years of experience in HVAC. Technical School or formal training is preferred., • This position is highly physical and requires regular use of hands, stooping, kneeling and climbing ladders. It requires employees to regularly lift and/or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs., • This role may involve exposure to variable weather conditions, moving mechanical parts, heights, noisy operating equipment and other variable environmental conditions based on location, • Strong organizational skills, positive attitude and an ability to learn and grow quickly, • Must be capable of working independently or in a team, • Confident, articulate and professional speaking abilities., • Ability to travel and work overtime/weekend as needed, • Ability to review plans, diagrams and flow charts, • Demonstrate a high level of trouble shooting skills, critical thinking and problem solving skills, • A general knowledge of electronics is required, • Valid driver’s license and clean DMV record, • Strong knowledge of relative safety standard/good practice and willingness to use PPE, • EPA certification and OSHA certification preferred Compensation: • Competitive salary, • Medical/dental/vision insurance, • Retirement plan BROAD U.S.A. is an equal opportunity employer

Job Description About the Role We’re looking for a skilled Refrigeration Field Technician to join our commercial and industrial HVAC/R team. This hands-on role involves installing, servicing, and maintaining refrigeration systems, ranging from halocarbon to ammonia-based setups, across a wide range of facilities. If you have strong technical knowledge, take pride in safety and craftsmanship, and enjoy solving complex mechanical challenges, this could be a great fit. You’ll work closely with our service manager, dispatch, and office team to ensure timely, high-quality service delivery and customer satisfaction. What You’ll Be Doing • Perform preventive maintenance, repair, and installation of HVAC/R systems, • Troubleshoot mechanical and electrical components of refrigeration equipment, • Ensure all work complies with OSHA, EPA, local, and union codes and standards, • Communicate effectively with customers, team members, and supervisors, • Accurately record labor, materials, and service details on job tickets, • Respond to emergency service requests when needed, • Maintain truck stock and ensure proper use of tools and safety gear, • Assist with crane signaling and equipment placement when required, • Report safety concerns, service trends, or customer issues promptly What We’re Looking For • High school diploma or GED, • Technical school or refrigeration trade training preferred, • 2–5+ years of hands-on HVAC/R field service experience, • EPA Refrigerant Certification (required), • Familiarity with commercial and industrial HVAC/R equipment, • Strong understanding of electrical, pneumatic, and control systems, • Ability to read blueprints, schematics, and technical documents, • Valid driver's license with clean driving record, • D2 or S2 license preferred, • Ability to lift up to 100 lbs and work in varied physical environments, • Willingness to travel and occasionally stay overnight on job sites What You’ll Get • Competitive pay based on experience, • Health, dental, vision insurance + free telehealth, • 401(k) with company match, • Paid time off, holidays, and sick leave, • Career growth with paid certifications and training, • Company vehicle or allowance, phone allowance, uniforms, and PPE, • Supportive team culture with experienced management Physical & Work Environment This is a physically active field role. Technicians must be comfortable working in extreme weather conditions, confined spaces, rooftops, and mechanical rooms. Frequent standing, climbing, kneeling, bending, lifting, and reaching are required throughout the workday.

Job DescriptionDescription: Atlantis UGS is an Audio Visual Installation company who works with Fortune 100 corporations and supports the legal, corporate, financial, educational, entertainment, hospitality, and medical markets throughout the US. We are actively interviewing at this time for upcoming projects near Cary and Raleigh, NC. Seeking experienced Audio Visual Installation Technicians for Low Voltage Commercial installation. *Commercial Audio Visual Installation experience Required. _ _ Benefits offered to our Atlantis Partners Employees: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Vision insurance THE AUDIO VISUAL TECHNICIAN WILL BE INSTALLING • Ceiling mounted video projectors, • Speaker systems, • Wall mounted cameras, • Control panels, • Running and terminating of low voltage cabling., • Equipment rack installations, • TVs/TV mounts, • Video walls ETC.Requirements:, • AV Equipment Installation on Commercial Jobsite: 3 years (Preferred), • Ceiling Speaker Installation: 1 year (Preferred), • Large Display Mounting: 1 year (Preferred), • Low voltage: 2 years (Preferred), • Structured Cabling: 2 years (Preferred), • Commercial Audio Visual Installation: 2 years (Required), • It is a Plus to have: OSHA10, OSHA30, SST, • It is a Plus to be certified with Extron, Centron, AMX or CTS License/Certification: COVID-19 considerations: All of our customers are requiring onsite technicians to be fully vaccinated

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1139B - Newark, NJ

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement Kitchen Tune Up is a fast growing, locally owned kitchen remodeling company that is part of a national franchise. This is a great opportunity to join our team and be part of an exciting and growing business in this area. We have strong marketing leads for Kitchen upgrades and we are looking for a skilled Carpenter / Cabinet Installation Technician who is proficient and experienced in the installation of kitchen cabinets and trim carpentry. Must have an eye for quality and detail, and the ability to accurately and efficiently hang cabinet doors and install drawer fronts and hardware. All work is in the Bergen Country area. Compensation: Up to $30 per hour depending on experience. Skills: Prior experience in cabinet re-facing and carpentry Ability to install cabinet doors and drawer fronts Ability to install cabinet hardware Ability to install new drawer boxes, roll-out trays, and other cabinet add-ons Interact with customers on a friendly and professional level Desirable ability to cut and install crown molding.

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities * Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. * Perform preventative maintenance tasks according to established schedules and equipment specifications. * Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. * Ensure all work complies with local, state, and federal codes, as well as company and safety standards. * Maintain accurate service records, work orders, and equipment documentation. * Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. * Assist in startup and commissioning of new systems and equipment. * Respond to emergency service calls in a timely and professional manner. * Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications * High school diploma or GED required; technical or trade school certification in HVAC is preferred. * 3+ years of experience as an HVAC technician in commercial environments. * EPA Section 608 Certification required. * Valid driver's license with a clean driving record. * Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. * Ability to read and interpret blueprints, technical diagrams, and service manuals. * Familiarity with digital HVAC tools and software is a plus. * Excellent troubleshooting skills and attention to detail. * Ability to work independently and as part of a team in a fast-paced environment. * Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits * Competitive hourly wage based on experience * Health, dental, and vision insurance * 401(k) with company match * Paid time off and holidays * Opportunities for training, certifications, and career advancement * Company vehicle and tools provided (where applicable)

Job Description We are currently seeking a skilled Generator Technician to join our team. As a Generator Shop Technician, you will be responsible for performing maintenance and repairs on generators in our shop. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability. Key Responsibilities: • Performing maintenance and repairs on generators in the shop, • Conducting diagnostic tests to identify issues and determine appropriate repairs, • Replacing faulty parts and components, ensuring proper installation and adjustment, • Performing routine inspections and preventive maintenance on generators, • Maintaining accurate records of all maintenance and repair activities, • High school diploma or equivalent, • Previous experience as a generator technician or similar role, • Strong electrical and mechanical aptitude, • Ability to diagnose and troubleshoot generator issues, • Knowledge of generator safety protocols, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description EXPERIENCED FIELD TECHNICIANS NEEDED IN NEWARK, NJ Cennox is seeking an enthusiastic Field Technician to join our expanding Field Services division. We are looking for passionate, experienced field professionals that are ready to work in an environment that allows you to grow as Cennox grows...Those with exceptional customer service and who can thrive in a dynamic team culture should apply. Also, willing to be cross trained to support our other lines of business, banking and retail. WHY SHOULD YOU JOIN THE CENNOX FAMILY? • Competitive Pay & Paid Training, • Company Vehicle, • Total Benefits Package including Retirement, Health, Dental, Vision, Life Insurance & more, • Paid Holidays, Vacation & Sick Package, • Company-provided tools, uniforms, and Android smartphone, • Flexible work schedule, paid training, and opportunity for travel In this role, you will service our customers by performing preventative maintenance, installation, determining issues with products, and training customers on the proper use of financial equipment throughout Newark and surrounding areas. This position offers the chance to become part of a rapidly growing company. WHAT YOU'LL BRING: • 3+ years experience with low voltage electronics, mechanical systems, and computer experience; Safe or ATM Technical experience is a plus, • Electro-mechanical skills a must, ability to use basic hand tools including but not limited to multi-meter, voltmeter, volt-ohm meter, • Working knowledge of Microsoft Office (Word, Outlook, Excel), • Experience with mapping and routing applications such as MapPoint or Google Maps, • Ability to learn through telephone training, • Great communication/customer service skills and ability to interpret/execute written instructions, • Valid driver's license with a driving record in good standing and a reliable/insured vehicle, • Ability to communicate and provide excellent customer service, • Ability to lift/move 50 or more pounds, stand, climb, bend, stoop, and reach freely, • Ability to work both indoors and outside in all-weather and sit/drive for extensive daily travel, • Good hand/eye coordination and sharp eyesight Notice on Use of AI in Hiring As part of our commitment to fair and efficient hiring practices, Cennox uses JazzHR’s TalentFit AI tool to assist in evaluating candidate applications. This technology helps us match applicants to job requirements based on qualifications and experience. All hiring decisions are ultimately made by our human recruiting team. If you have questions or concerns about this process, please let us know during your application. E-Verify Cennox participates in the E-Verify program to confirm the identity and employment eligibility of all new employees. For more information, please visit . Powered by JazzHR 96mM6w536Z

Job DescriptionAbout the Role Are you a hands-on problem solver who enjoys working with tools and tackling mechanical challenges in the field? We’re looking for a reliable and self-motivated Field Service Technician (FST) to join our growing team. This role involves installing, maintaining, and repairing non-IT healthcare equipment at various client locations, ensuring safety, functionality, and customer satisfaction. This is a non-IT, field-based role—perfect for those with experience in construction, low-voltage installations, light mechanical repair, or similar trades. What You’ll DoEquipment Installation & Field Service * Install, troubleshoot, and repair non-networked healthcare equipment at medical and commercial facilities * Use hand and power tools to install on a variety of surfaces including drywall, tile, and masonry * Read and interpret installation diagrams, blueprints, and equipment manuals * Maintain clean and organized work areas at all job sites Customer & Team Communication * Serve as the primary onsite point of contact for client representatives * Communicate effectively with Field Managers, Team Leads, and clients throughout project execution * Identify and escalate project issues, inventory concerns, or site discrepancies in real time Reporting & Documentation * Complete daily documentation including timecards, expense reports, service notes, and checklists * Capture and upload high-quality photos showing completed work and any noted issues * Submit sign-off forms and reports using company systems Inventory Management * Verify delivery and condition of parts and materials at each site * Report missing, damaged, or incorrect inventory before starting installations * Return unused or damaged units to proper packaging as required What You BringRequired Qualifications * High School Diploma or GED * 1+ year experience in a field service, maintenance, or hands-on trade role * Proficient with standard hand and power tools (drills, levels, etc.) * Comfortable working independently in customer-facing environments * Strong communication skills—both verbal and written * Working knowledge of Microsoft Office (Word, Excel, Outlook) Preferred Experience * Background in construction, low-voltage systems, plumbing, or general maintenance * Familiarity with reading blueprints or installation guides * Prior experience working in healthcare or regulated environments Key Attributes for Success * You enjoy being on the move and working with your hands * You’re detail-oriented and take pride in doing the job right the first time * You’re calm under pressure and capable of solving problems independently * You communicate clearly and professionally with teammates and clients alike Additional Information * This is a non-IT role; it does not involve computer systems, software, or networking * Occasional overnight travel may be required depending on project location * All tools, training materials, and support are provided by the company Why Join Us? * Supportive and safety-focused work environment * Opportunities for career growth and specialized training * Be part of a company that values craftsmanship, accountability, and professionalism Apply Now If you're ready to take the next step in your career and work in a role where your skills truly make an impact, we’d love to hear from you. Let me know if you'd like a Word doc or PDF version, or if you want help customizing this for a job board or internal posting. Powered by JazzHR EDr8RAKOn1

Job Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description C Squared Systems is currently seeking a mid-level RF Field Technician to join our team. One the main responsibilities for the Field Technician will be assisting with the installation and construction of various distributed antennas systems. The candidate will also become familiar with RF concepts and best practices and be exposed to a variety of test equipment. They will become an integral part of a team to ensure the systems are installed per the procedures and regulations mandated by the customer. The candidate must have previous construction experience and be very comfortable interacting with customers and co-workers on a daily basis. This is a hands-on position that requires the candidate to be on his/her feet throughout the day. Candidates have room for growth if they show exemplary performance, which can lead to a position of construction management for larger scale projects. This position will require the individual to be in the field 95% of the time. The candidate must be available to travel with potential overnight stays up to 50% of the time and be available for night shifts/weekends when needed. This is a full time hourly position with at least 40 hrs per week. Primary Responsibilities • Installation of various coaxial cable types of various sizes (1/2”, 1/4”, 7/8”, etc.)., • Installation of various fiber cables and fiber heads (single/multi-mode, LC, SC, FC, ST, etc.)., • Perform cable terminations and fusion splicing., • Perform a variety of testing such as sweep and PIM., • Work hands on with spectrum analyzers, transmitters, and other electronic test equipment., • Perform site surveys and in-depth walkthroughs., • Installation and repair of various DAS equipment from a variety of manufacturers., • Maintain test equipment and tools for continuous use., • 2 year college degree. Related coursework a plus., • 3 to 4 years of construction experience. Previous experience with DAS construction and other cellular systems is preferred., • General construction knowledge and know-how. Existing OSHA certifications are a plus., • Ability to read and interpret cabling diagrams and construction drawings., • Proficient with using various tools such as drills, saws, torque wrenches, crimpers, etc., • High attention to detail and excellent ability to multi-task is crucial., • Has the desire to learn and advance within a technical field., • Proficient with using standard computer applications (Outlook, Word, Excel, etc.)., • Comfortable working in the field and have availability for nights/weekends.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description What to expect as a Commercial Security Senior Service Technician: The Senior Service Technician will be responsible for service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems. As a Security Senior Service Technician, this person is expected to be a highly proactive and skilled individual and, at all times, maintain performance consistent with Allied Universal Technology Services' core values. • Travel to commercial client sites to service, repair, troubleshoot, and detect access control equipment and IP-based video security systems. including, but not limited to:, • (Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems), • Troubleshoot system installations in a such a manner as to identify issues and apply the most effective and efficient resolution consistent with company installation standards; identify and repair physical security systems as required to ensure operability and compliance with any applicable building code, • Apply all necessary documentation for tracking of service-related issues, • Demonstrate knowledge and skill in the safe use of hand and power tools, analog/digital test equipment and CCTV testing devices, • Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low-voltage applications, • Establish and maintain effective working relationships with both internal and external customers, • Provide phone and on-line remote diagnostic support, • Drive to commercial client sites, with a company-issued vehicle to perform service, • High School Degree, Vocational School or equivalent required, • 5+ years of field experience, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possession of state-specific licensing (i.e. Class D or Alarm Installer, etc.) or ability to hold license once hired, • Understanding of Windows operating systems and overall IT network topology, • Highly proactive and skilled individual, and at all times maintain performance consistent with Allied Universal Technology Services (AUTS) core values, • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Available for scheduled “on-call" duties to respond to emergency service calls, • Strong troubleshooting skills, mechanical and electronic aptitude, • Capable of lifting up to 50lbs and work on ladder heights of up to 16', • Be able to work independently or as a member of a team, • Salary range: $35 - $50 hourly, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1446615

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. For over 30 years, LVI has provided facility maintenance services across the United States and Canada for retail, restaurant, and government clientele. Our services include Electrical, Lighting, HVAC, Construction/Remodel and EV Charger installation. We operate in all states with 22 regional office locations. The Hawaii Services Division will be the most recent addition to our service expansion. Lane Valente Industries, a leader in Facility Maintenance and Construction, is looking for a polished professional with an entrepreneurial spirit to head up our Hawaii Services Division out of Oahu. Electrical experience is a must with a solid understanding of operations and management. CURRENT OPPORTUNITY: HVAC Operations Manager Key Responsibilities: • Manage daily service and project requests, • Manage in house technician schedules, • Manage time efficiently while working in the office and field, • Hire and develop new in-house technicians., • Negotiate contracts and terms with vendors to secure favorable pricing and conditions., • Monitor and manage vendor performance, ensuring adherence to agreed-upon standards., • Proven HVAC experience with an understanding of operations and management., • HVAC / Mechanical license is preferred but not required, • Strong management and operations skills, • Excellent analytical and problem-solving abilities., • Ability to work in a fast-paced, dynamic environment and meet deadlines., • Strong communication and interpersonal skills., • Competitive salary and benefits package., • Benefits Offered:, • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match, • A collaborative and inclusive work environment., • Opportunities for professional growth and development. Lane Valente Industries is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Powered by JazzHR HaGBnB0txv