Offres instrumentation technician à Bayonne, New JerseyCréer des alertes d'emploi

Job DescriptionDescription: Evident Process Heat and Power is a currently hiring a full time Boiler Technician. This position is responsible for the troubleshooting, repairing and the maintenance of commercial/low pressure and high-pressure boilers and all related boiler equipment. Job Responsibility • Have knowledge of mechanical and electrical systems., • Ability to read and comprehend simple instructions., • Monitor boiler operations and maintain required logs., • Strong ability to problem-solve and troubleshoot., • Ability to travel to various job sites., • Detailed oriented., • Able to work in team environment., • Respond effectively to all emergencies., • Having a working knowledge of steam and hot water boilers, burners (gas, oil & combination), associated controls & electrical circuits, combustion, and associated piping systems is a PLUS., • Familiar with instrumentation and controls is a PLUS., • Knowledge of Siemens applications, • Must be able to access and be comfortable with working in a variety of conditions to include confined spaces damp and/or dusty locations, freezing conditions and hot conditions.

The SPD Technician II is responsible for the decontamination, preparation, sterilization, and distribution of surgical instruments and equipment. This role ensures all instruments are properly cleaned, assembled, and sterilized according to established standards while supporting surgical case readiness and maintaining accurate documentation. The technician must demonstrate strong knowledge of surgical instrumentation and infection control practices. Key Responsibilities • Perform decontamination, cleaning, and disinfection of surgical instruments using manual and mechanical methods, • Inspect, assemble, and package general and specialty instrument trays according to count sheets, • Operate and monitor sterilization equipment, ensuring proper documentation and quality control, • Identify and replace damaged or missing instruments, • Maintain accurate records using instrument tracking systems, • Prepare and dispatch surgical case carts based on operating room schedules, • Follow infection control and OSHA safety standards during handling and transport of sterile items, • Troubleshoot cleaning and sterilization equipment as needed, • Assist with stocking, transporting supplies, and maintaining a clean work environment, • Collaborate effectively with team members and communicate clearly Qualifications • CRCST certification required, • 1–2 years of recent sterile processing experience, • Knowledge of decontamination, sterilization processes, and instrument handling, • Ability to operate automated and technical equipment, • Strong attention to detail and ability to work efficiently in a fast-paced environment, • Good communication and interpersonal skills, • Basic computer skills, including MS Office, • Ability to perform basic mathematical calculations, • Physical ability to lift, push, and move equipment and supplies, • High school diploma or equivalent required, • Must be able to work flexible schedules, including weekends and holidays Important Details: • 8-week contract position, • Shift is 7.5 hrs/day (7:00 AM – 3:00 PM), 37.5 hrs/week, • Location is New York City, NY 10003, • Pay Range: $35 - $40 per hour Call to Action: • Spots Are Filling Quickly — Apply Now! Company Description: “Pride Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors”

• Job Type: Support Staff - Union, • Bargaining Unit: SSA, • Regular/Temporary: Regular, • Hours Per Week: 35 Under the direction of the Sterilization Manager, the incumbent is responsible for maintaining the sterilization area and all instrumentation that requires reprocessing. Lead Technician B, Sterilization, serves as a senior member of the sterilization team, providing guidance and coordination of daily workflow under the direction of the Supervisor/Manager. While Lead Technician B, Sterilization, may assist in delegating tasks and facilitating communication among staff during the Supervisor's absence, this position does not include supervisory authority. A Supervisor or designated officer will always be on call to provide managerial oversight and support as needed. Responsibilities • Inspect, package and sterilize dental instruments and materials and operate the sterilization equipment according to protocol., • Will collect soiled instrumentation and deliver clean instrumentation according to schedule., • Prioritize the assembly of trays / cassettes and instruments to meet the needs of various specialties., • Maintain a clean, organized, and compliant sterilization area according to the policy., • Incumbent must adhere strictly to safety, sterilization, handling and technical regulations., • Bachelor's degree or equivalent in education, plus three (3) years of related experience required., • As part of the selection process, candidates' work performance histories will be reviewed to ensure alignment with the standards and expectations of the role. Columbia University is committed to the hiring of qualified local residents.

Job Description Job Specific Competencies: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed.. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilize equipment properly, according to manufacturers recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance,safety, environmental and infection control standards appropriate to this position. Performs other duties as assigned within the scope of practice. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job DescriptionPosition: CVOR Surgical TechnologistLocation: Manhattan, NY 10029Shift: 8:00 AM – 4:00 PMDuration: 13 Weeks (Extension Possible)Compensation: * Local: $1,900 – $2,300/week * Travel: $2,400 – $2,900/week Note: "MUST HAVE 2 YRS MIN. WORKING IN AN OPERATING ROOM AS AN OR TECHNICIAN. MUST HAVE CARDIAC OR EXPERIENCE" Job Summary The Surgical Technologist is responsible for assisting in surgical procedures by performing scrub and circulating duties under the direct supervision of a Registered Professional Nurse. This role requires expertise in operating room protocols, aseptic techniques, and surgical instrumentation, particularly in cardiac procedures. Key Requirements * Minimum 2 years of experience as an OR Technician * Mandatory Cardiac OR (CVOR) experience * CST (Certified Surgical Technologist) certification required * Completion of an accredited CST training program * High School Diploma required Key ResponsibilitiesScrub Duties * Perform surgical scrub, gowning, and gloving procedures * Maintain strict aseptic technique at all times * Prepare sterile instrument tables and supplies based on procedure * Assist in draping patients and surgical areas * Anticipate surgeon needs (instruments, sutures, sponges, etc.) * Maintain accurate counts of instruments, needles, and sponges * Handle specimens according to protocol * Assist with dressings and drainage systems * Ensure proper disposal of contaminated materials and reprocessing of instruments Circulating Support Duties * Assist RN with circulating functions * Prepare and organize surgical supplies and equipment * Ensure proper patient positioning and safety * Maintain sterile environment and monitor OR traffic * Assist with patient transfer and post-procedure care * Support room turnover and preparation for next procedure Medication & Safety Support * Assist RN with medication preparation under supervision * Label all medications appropriately * Verbally confirm medication details before administration * Retain medication containers until patient leaves OR * Do not handle narcotics or controlled substances Operational Support * Assist with patient transport as needed * Monitor inventory levels and notify leadership of changes * Maintain organization of OR and sterile storage areas * Support updates to preference cards and equipment needs Skills & Competencies * Strong knowledge of surgical procedures and sterile techniques * Excellent communication and teamwork skills * High attention to detail and patient safety * Ability to work in a fast-paced, high-pressure environment * Physical stamina and manual dexterity Work Environment * Exposure to a wide range of surgical procedures and technologies * Fast-paced operating room setting For more details reach at or Call / Text at 516-587-6677. About Navitas Healthcare, LLC: It is a certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job DescriptionSalary: $56,000 annually Seeking a motivated, high-energy candidate with a strong customer service background in fields such as medical, restaurant, hotel and hospitality for a customer service position based in the Operating Room at one of our accounts in Brooklyn, NY. CRCST or CBSPD certification is required. Provisional certificates ok-can complete hours on the job. CRCST certification a plus Connected Surgical will provide training. Qualifications • IAHCSMM or CBSPD, CRCST preferred or must be obtained within 6 months of hire (CSi provides all study material and exam fee), • Customer service background, • High level of professionalism, • Responsible and dependable, • Strong interpersonal communication skills, • Management experience a plus but not required, • Strong rapport building skills, • High-energy, • Self-Motivated, • Desires opportunities for advancement, • College Degree a plus but not required About the Company Connected Surgical is a fast-growing customer service-based company that provides services and support for minimally invasive surgical procedures to our customers across the US. We provide surgical instrumentation, video systems, technical support and sterile processing to our customers while delivering them cost savings averaging 30% annually. About the Job The job entails supporting minimally invasive surgical procedures in the operating room. Interacting with customers (surgeons, nurses, hospital management, and surgical technologists) on a daily basis. You will be determining needs of the surgeon prior to the procedure; assisting in setting up the operating room and pulling all necessary instrumentation for the procedure; are in the room and available to help troubleshoot video equipment and answer any questions or address any complaints of the surgeon, nursing staff or surgical technologists may have. You will also take part in sterile processing duties of instruments used during our cases. Advancement Opportunities Connected Surgical is a fast-growing company with many opportunities for growth both locally and nationwide. We never hire managers from outside of the company. Every manager employed by Connected Surgical started out originally in this role. Connected Surgical also has a Management Development Program to develop employees that are interested in advancing with the company. Management opportunities available after 1 year of employment. Schedule: 9:30AM-6:00PM Mon-Fri rotating call on weekends and holidays with another CSi technician. Benefits: • Complete Medical, Dental and Vision benefits of which Surgical Concepts & Innovations covers 75% of the cost of those insurance plans on behalf of the employee. Employee responsibility is only 25%., • Life Insurance, • Short and Long Term Disability, • Accident Insurance, • Critical Illness Insurance, • 401k Retirement with company match, • 10 days of PTO annually, accrued each bi-weekly pay period., • 3 days of paid floating holidays annually, • 9 paid holidays annually, • Employee Reward and Recognition Program, • Eligible for Raises Annually, • Paid Family Leave Pay: Connected Surgical offers competitive starting salaries based on level of education and experience. Employees are salaried employees who start out at $56,000 annually if CRCST certified.

Under direct supervision, the Central Sterile Supply Technician performs a variety of work involving the decontamination, preparation, packaging, processing, sterilization, storage and distribution of medical devices, equipment, supplies, and instrumentation according to prescribed procedures and te

We are currently recruiting for an Operations and Maintenance Technician (OMT) at Bayonne Energy Center (BEC) in Bayonne NJ. Education in power generation, mechanical maintenance, electrical maintenance or instrumentation and controls is a plus. The OMT is responsible for the proper operation and ma

A leading healthcare institution in Brooklyn seeks a full-time Medical Instrumentation Machine Technician for evening shifts. The successful candidate will be responsible for the preparation and repair of Hemodialysis equipment and perform preventive maintenance.

The Department of Ambulatory Dialysis at SUNY Downstate Health Sciences University is seeking a full‑time Instrumentation Machine Technician / TH Medical Instrumentation Specialist. Medical Instrumentation Machine Technician (Evenings). Teaching Hospital Medical Instrumentation Specialist.

Job Description Electrical and Instrumentation Technician installs, services, troubleshoots and performs preventive and predictive maintenance functions on plant equipment. This equipment includes but is not limited to; plant lighting equipment, electrical circuits, motors, starters, motor control centers, programmable controllers, control panels, transformers, switches, transmitters, automatic valves, regulators, guide systems, distributed control systems, PLC's, overhead cranes etc. May perform additional duties as assigned. Minimum Requirements: Must have a high school diploma or general equivalency diploma (GED). Must have basic math skills. Must be mechanically inclined and a minimum of 2 years of electrical / instrumentation training and/or experience. Essential Job Functions: • Able to troubleshoot, repair and wire 120 volt and (3) phase 460 volt circuits and electrical equipment., • Basic understanding of Electricity and Instrumentation., • Able to troubleshoot, repair and install distribution systems up to 460 volts., • Able to troubleshoot, repair and install controls: coils contactors, relays, brakes etc. LANGUAGE SKILLS: Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving several concrete variables in standardized situations. Leading root cause analysis and problem solving teams. Analytical and field troubleshooting skills. TECHNICAL SKILLS: Working knowledge of mechanical and electrical machinery, including conveyer systems, breakers, boilers, hydraulic and pneumatic systems, etc. Knowledge of computer systems and the ability to learn new complex applications. CERTIFICATES, LICENSES, REGISTRATIONS: May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. • Able to install transformers up to 460 volt, • Able to interpret wiring drawings / diagrams., • Able to wire motors single phase, 3 phase 460 volt and 3 phase 4160 volt as per NEC / OSHA codes and Pratt standard operating procedures., • Able to use and interpret a Megohm meter., • Able to use and interpret a multimeter; volts, amps and ohms, • Able to troubleshoot and install switches; proximity, speed, limit, pressure etc., • Able to run and bend conduit and pull wire., • Able to troubleshoot control valves and transmitters., • General knowledge of electrical and pneumatic systems in mill., • Understanding of pneumatic controls including controllers, actuators, positioners and valves.

Job Description Hudson Regional Hospital, nestled in Secaucus, New Jersey, is a distinguished healthcare institution committed to building a healthier community through exceptional care, advanced technology, and knowledgeable physicians. We take pride in being the #1 choice for surgery, boasting the Institute for Robotic Surgery, equipped with the latest surgical robots and six SRC Center of Excellence designations. This places us at the forefront of robotic and minimally invasive surgery, with the unique distinction of being the world's first hospital to receive the SRC Center of Excellence designation in Robotic Spine Surgery. Duties: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilizes equipment properly, according to manufacturer's recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance, safety, environmental and infection control standards appropriate to this position. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job Description Job Title: Sterile Processing Associate II (SPD Technician II) Location: New York, NY 10003 Duration: 13 Weeks Schedule: 7.5-hour shifts, 5 days/week (37.5 hrs) | Flexible, weekends & holidays required Overview "Navitas Healthcare, LLC" is seeking an experienced SPD Technician II to perform decontamination, sterilization, and preparation of surgical instruments while ensuring compliance with infection control and safety standards. Key Responsibilities • Clean, disinfect, and sterilize surgical instruments, • Assemble and inspect instrument trays (general & specialty), • Operate sterilization equipment & perform quality checks, • Manage instrument tracking systems and documentation, • Prepare and deliver surgical case carts per OR schedules, • Maintain OSHA and infection control standards, • Assist with inventory, stocking, and distributionRequirements, • CRCST Certification (Required), • 2+ years of sterile processing experience, • High School Diploma or equivalent, • Knowledge of sterilization, instrumentation, and infection control, • Ability to operate equipment and handle physical tasksPreferred, • Experience with tracking systems (e.g., Horizon), • MS Office skills For more details contact at or Call / Text at 516-862-1169. About Navitas Healthcare, LLC certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description The Perioperative Clinical educator is part of the clinical education team with a primary focus on training OR assistants and LVTs in all phases of perioperative care. The Perioperative educator will focus on mentorship, curriculum development, lecturing, and implementation of an ongoing continuing education program. The Perioperative Clinical Educator works in an LVT capacity approximately 60% of the time and oversees the onboarding, assessment, and clinical education of all staff working within the operating room at the Schwarzman Animal Medical Center. The perioperative clinical educator will adhere to all policies and procedures as they relate to the safe practice of central sterilization, processing, proper use and maintenance of all surgical and anesthetic equipment. Minimum Qualifications Desired • Current NYS Veterinary Technician license required, • Minimum 5 years' experience as an LVT, • Strong knowledge of operating room procedures and equipment, • Ability to work and multi-task in a fast-paced environment, • Demonstrate a high level of initiative independently and within a team environment, • Demonstrates leadership associated with the core values of the Schwarzman Animal Medical Center, • Associate or bachelor's degree from an AVMA accredited Veterinary Technology school, • Master's degree in education preferredExperience:, • Minimum 5 years' experience as an LVT, • Advanced knowledge of surgical equipment necessary, • Leadership experience requiredDuties and Responsibilities, • Support clinical education team in all facets of perioperative care, • Provide training on maintenance of anesthesia machines, • Proficient knowledge and ability to educate staff on patient preparation and positioning, soft tissue, orthopedic, and neuro instrumentation, aseptic technique, steam and gas sterilization, set-up for surgical scopes, portable X-Ray, C-arm, Stryker Integration System within the surgical area, • Assist in developing, planning, and implementing training schedules, process improvement plans, and evaluations for OR assistants, surgery coordinators, patient care assistants, LVTs, and Veterinary Technician Interns, • Collaborate with OR Manager, Clinical Educators, Surgery Team Leaders, OR Controller, and Director of Surgery to provide quality standards for patient care, and ongoing professional development to the perioperative care team, • Provide leadership in cardiopulmonary resuscitation events and stabilization of critical patientsBenefits, • Competitive salary, • Generous sign-on bonus, • Four-day work week, • Comprehensive benefits including health insurance with medical, dental, and vision benefits, very generous paid time off, paid continuing education time-off and stipend, and 403-b retirement plan with employer contribution., • School loan debt forgiveness opportunity as a non-profit hospital, • Non-corporate practice with no pressure for percentage pay A Commitment to Lifelong Learning: Founded in 1910, the Schwarzman Animal Medical Center is the world's largest veterinary teaching hospital, offering compassionate, collaborative, and cutting-edge veterinary care. Our commitment to innovation has led to the creation of one of the most advanced veterinary facilities in the world. State-of-the-Art Facilities: AMC just completed a major expansion and renovation. This project transformed the hospital's entire 83,000-square-foot space into a state-of-the-art facility unlike any other. Highlights include: A brand-new full floor surgical center, 1.5 Tesla Philips MRI (the exclusive high field MRI for small animals in NYC), 64-slice spiral CT scanner, Electroencephalography (EEG), Elekta Versa HD Linear Accelerator, In-house Laboratory, Ultrasound, Echocardiogram, and Mobile Cone Beam CT A multidisciplinary team of 140+ veterinarians across 20+ specialties: With over 20 specialties and services under one roof, our departments frequently work together to deliver the highest quality of patient care in the veterinary field. Our dynamic array of specialists means that we are the go-to place for complex cases. A Hospital in the heart of NYC: AMC is located in Manhattan, surrounded by leading research and teaching institutions such as Cornell University College of Veterinary Medicine, Weill Cornell Medical School, and NYU. Collaborative research opportunities abound, and our strong focus on education ensures a rewarding career for those passionate about mentoring and advancing veterinary medicine.

Job Description Job Specific Competencies: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed.. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilize equipment properly, according to manufacturers recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance,safety, environmental and infection control standards appropriate to this position. Performs other duties as assigned within the scope of practice. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job Description At Serve Robotics, we’re reimagining how things move in cities. Our personable sidewalk robot is our vision for the future. It’s designed to take deliveries away from congested streets, make deliveries available to more people, and benefit local businesses. The Serve fleet has been delighting merchants, customers, and pedestrians along the way in Los Angeles, Miami, Dallas, Atlanta and Chicago while doing commercial deliveries. We’re looking for talented individuals who will grow robotic deliveries from surprising novelty to efficient ubiquity. Who We Are We are tech industry veterans in software, hardware, and design who are pooling our skills to build the future we want to live in. We are solving real-world problems leveraging robotics, machine learning and computer vision, among other disciplines, with a mindful eye towards the end-to-end user experience. Our team is agile, diverse, and driven. We believe that the best way to solve complicated dynamic problems is collaboratively and respectfully. At Serve Robotics, we are reimagining how things move in cities. Our personable sidewalk delivery robot, Serve, is our vision for the future of delivery. It’s designed to take deliveries away from congested streets and onto underutilized alleys and sidewalks. Serve reduces emissions, relieves traffic, and makes deliveries both faster and cheaper. Why move a two-pound burrito with a two-ton car? As a Robotics Field Operations Technician, you’ll play a pivotal role in ensuring the success of our robot fleet through technical maintenance and operational support. This role is onsite in Brooklyn, NY Responsibilities * Troubleshoot, diagnose, and repair robots using hardware and software tools. * Monitor and support robots in the field, resolving operational issues. * Assist with the deployment and retrieval of robots in and out of market areas. * Conduct component-level and assembly-level testing to identify performance issues. * Provide feedback to engineering and development teams to refine hardware, software, and operational processes. * Track, manage, and maintain lab and component inventories. * Log repair activities in Jira, including photos and videos, to inform hardware and software teams. * Assist merchants, retail staff, and customers during delivery operations. * Maintain the cleanliness and appearance of robots to uphold Serve Robotics’ brand image. Qualifications * 1–3 years of experience in electro-mechanical, robotics, automotive, electronics, or a similar technical field. * Proficiency with diagnostic tools, including multimeters, oscilloscopes, and other bench equipment. * Experience with software and hardware troubleshooting. * Familiarity with Jira or similar documentation tools. * Ability to lift 70 lbs and spend extended periods on your feet. * Comfortable driving U-Haul-sized vehicles. * Valid U.S. driver’s license. * Ability to work weekends and flexible shifts, including mornings and evenings. What Makes You Standout * Hands-on experience in robotics or automation systems. * Familiarity with rapid prototyping, testing, or instrumentation. * Comfortable riding a bicycle in a city environment.

Assists a Lead Ground Maintenance Technician or a Ground Maintenance Technician on motorized equipment as needed.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

As a Ground Maintenance Technician (GMT) in a motorized role, you will be a part of Delta’s Ground Support Equipment team. External Applicants Only – Ground Maintenance Technician (Motorized) hired to work at the [Airport Name] airport receive a $5,000 sign-on bonus.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (M

As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. External Applicants Only – Ground Maintenance Technician (Stationary) hired to work at the JFK airport receive a $5,000 sign-on bonus.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (M

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

How you'll help us Keep Climbing (overview & key responsibilities).At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Ground

Leverage our career self-progression plan to move from Field Technician I to Field Technician IV, with 10% increases for each progression level and bonus payments for completing course work. Field Technicians can also earn an industry recognized certification. Our Field Technicians work outdoors, ut

Leverage our career self-progression plan to move from Field Technician I to Field Technician IV, with 10% increases for each progression level and bonus payments for completing course work. What our Field Technicians Enjoy Most About the Role. Field Technicians can also earn an industry recognized

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Requirements of the Position of Maintenance Technician:.

Requirements of the Position of Maintenance Technician II:.

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Company Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities.Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the col

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

HVAC Technician - Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems) - Ability to troubleshoot and repair water-driven heating and cooling equipment - Ability to troubleshoot and repair water or glycol pump systems - Ability to troubleshoot and se