Trabajos machine maintenance en Westfield, New JerseyCrear alertas

Job Description At Autoland Toyota Chrysler Jeep Dodge Ram, we are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. If you have an interest in automotive and a desire to develop a career in the industry, apply today! Are you experienced with basic level automotive maintenance and frustrated or bored with your current workplace? Do you want to enjoy a productive, safe, and professional environment where you can grow your career and feel good about where you work? We're looking for Oil Change/Entry Level Automotive Technicians to join our team. If this sounds like you, then come and see what we have to offer! What We Offer • Medical, Dental & Vision Insurance, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Health and wellness, • Discounts on products and services, • Air-conditioned shop, • State-of-the-art facility and cutting edge technology, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Knowledge of automobiles, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED; Technical degree preferred, • Minimum of 1 year in service department, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Positive, friendly attitude We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Essential Functions • Follow, without exception, all safety policies /safety rules, and procedures., • Follow all work instructions, both written and oral., • Required to keep shop and work areas in a safe and tidy condition, following 6S standards., • Required to perform all facility maintenance., • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties., • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager., • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc., • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc., • Assist in machine changeovers and start-up of machines for production needs when required., • To identify improvements, advise and correct potential problems., • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency., • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.), • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs., • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc., • Lead/coach and mentor maintenance technicians fostering skilled development and productivity., • Assign daily tasks and prioritize maintenance work orders in alignment with production needs., • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality., • Collaborate with management and other departments on cross functional initiatives., • Industrial Maintenance Millwright Certificate or Qualified Mechanic., • 4-6 years of direct hands-on experience with production equipment maintenance and repair., • Electrical knowledge of 3 phase and DC systems., • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc., • Forklift Certified - Ability to operate a forklift safely to eliminate personal injury and material damage., • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull., • Must possess excellent communication skills, professional maturity, and a proactive mindset., • Requires good eye/hand/foot coordination., • Good visual acuity – cannot be colorblind., • Must be able to stand for extended periods., • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements., • Ability to safely operate all equipment and tools. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental , paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job Description Job Description: 3rd Shift Industrial Maintenance Technician Full-time Shift(s): MON - SUN 11:00pm - 7:00am Location: Hillside, New Jersey OVERVIEW: You will be responsible for doing maintenance and also being an operator who is responsible for the overall reliability/efficiency of assigned production line/equipment. REQUIRED POSITION QUALIFICATIONS: • Make repairs to production equipment as required or directed, • Complete all preventative maintenance as assigned, • Maintain a safe and orderly production equipment area, • Highly motivated, self-directed, • Learn and perform multiple tasks in a fast-paced environment, • Work independently as well as in a team environment, • Willingness to work a flexible schedule, • Perform operator preventative maintenance on production equipment, • All other duties as assigned EDUCATION / SKILLS / EXPERIENCE: • High school diploma, Associates or Trade School, • Minimum of 3-4 years of mechanical experience, electrical skills strongly desired as well, • Troubleshooting, • Preventative maintenance and repairs, • Extreme attention to detail, • Experience in machine operation PREFERRED POSITION QUALIFICATIONS: • Previous experience maintaining industrial equipment, • Mechanically inclined

Job Description The Maintenance Technician handles troubleshooting and repairing mechanical and electrical equipment across the plant. Responsibilities include performing preventive maintenance, equipment changeovers, and preparing machinery for operation. This role may require overtime and availability for call-backs on weekends and holidays. Responsibilities • Perform preventative maintenance and troubleshoot electrical and mechanical systems, • Install, maintain, and repair hydraulic equipment and utility systems (e.g., boilers, compressors, HVAC, cooling towers), • Set up and change out equipment such as mixers, pumps, and packaging machines, • Conduct minor prefabrication work and operate machine shop tools, • Maintain a clean, organized work area and be available for various shifts, including on-call duty Qualifications • Solid understanding of mechanical and electrical systems, • Excellent written and verbal communication and interpersonal skills, • Professional under pressure, respectful in interactions, and dependable in task completion, • Capable of working both independently and collaboratively, • Proactive, responsible, and focused on achieving results, • Associate degree in a relevant skilled trade is preferred, • Alternatively, at least one year of machine or electrical maintenance experience plus two years in industrial maintenance is required, • Relevant technical education and experience combinations will be considered, • Must have knowledge of gear drives, conveyors, and pneumatic/hydraulic systems, • Should be familiar with basic electrical control systems, • Must be available to work weekends, holidays, and in various environmental conditions (hot, cold, or damp), • CMMS experience is a plus, • Must be able to lift up to 50 pounds

Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. REGIONAL TRAVEL ONLY Seeking 3+ years of experience in the maintenance and repair of industrial machine tools - Vertical and Horizontal Lathes

Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team.The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will al

Job DescriptionDescription: Adamas Building Services is a specialty company providing property managers with White Glove Services for ALL your property needs 24/7. With a full complement of services for residential and commercial luxury properties, you can count on Adamas to exceed your expectations. Adamas Building Services is looking for an exceptional customer service-oriented Concierge with experience working in luxury residential communities. Our company is a leading expert in the Residential Services market with properties throughout New Jersey, New York, Florida and Pennsylvania. We have openings at our location. Schedule: Sunday-Wednesday 3pm-11pm (32 hours) Thursday-Saturday 3pm-11pm (24 hours) Pay Rate: $18 / Hour The ideal candidate would be responsible for: • Meeting/Greeting residents and guests to determine the nature of their visit and maintain logbooks for all visitors, • Answering phone calls and assisting callers with information and/or instructions for the building, • Responding to inquiries on neighborhood services when applicable., • Receiving and overseeing deliveries, mail and packages for residents, • Inspecting the buildings and grounds to ensure safety and cleanliness and reporting any issues to the maintenance department., • Assisting management with any request for residents in the building, • Keeping lobby area, front desk and package are organized, neat and clean, • Properly communicating with lead concierge and Management., • Excellent verbal and written communication skills, • Must be professional, reliable, and have excellent customer service skills., • Ability to prioritize tasks according to importance in a fast-paced environment., • Dependable, punctual and able to work flexible working hours, • Ability to use a general office equipment such as computer, telephone, fax machine, as well as other computer tracking systems used at the property., • Should be computer savvy with knowledge of Microsoft Word, Excel and Internet, • Ability to be at work on a regular and consistent basis; Overtime may be required for this position., • Ability to work weekends and non-traditional holidays., • Weekly Pay, • Medical, Dental, 401K, • Vision

Summary \n \n The Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. \n \n The Machine Operator must be able to operate and oversee specialized automated packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated packaging equipment, therefore an understanding of mechanical and electrical systems is required. \n \n The Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. \n \n The Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday. \n \n Job Duties \n\n • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day.\n, • Responsible for determining the work flow sequence to minimize changeovers. \n, • Stages product work flow so it is ready for processing after pre-shift briefing to techs.\n, • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns. \n, • Direct assembly or disassembly, and cleaning as required for shift start and end operations.\n, • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities.\n, • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc.\n, • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product.\n, • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste. \n, • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention. \n, • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible.\n, • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance.\n, • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO.\n, • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards \n, • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences \n, • Strong organizational, critical thinking, presentation, and project management skills \n, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner \n, • Exceptional interpersonal and relationship building skills \n, • Advanced math and reading comprehension \n, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence \n, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce \n, • Understands and thrives in fast-paced, KPI-driven production environments \n, • Team player willing to assist in any function of packaging and labeling \n, • HS Diploma or 2+ years of related field experience\n, • 1+ years of experience in a leadership role\n, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry \n, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition \n, • Experience working with various machines or electrical systems\n, • Proven track record of managing the scope of operations in a complex and highly regulated business environment \n, • Cannabis product knowledge strongly preferred \n, • Able to stand or sit for extended periods of time. \n, • Able to lift up to 50 pounds\n, • Able to work a fully flexible schedule including nights and weekends if necessary\n, • Must pass all required background checks\n, • Must have a reliable vehicle\n, • Must be and remain compliant with all legal or company regulations for working in the industry\n, • Must possess valid driver's license \n, • Must be a minimum of 21 years of age\n, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry\n, • Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time\n\n #ENGHP Salary $22 USD per hour

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance Immediate Hire (Port Reading, NJ) Pump repair company seeks an experienced maintenance machinist. Must be capable of running engine lathe, milling machine, & drill press. Must have measuring tools Good pay and benefits This is a full time position

Job Description Maintenance Manager This position is at our Hillside/NJ office location Salary $100,000-$110,000 Overview of the Maintenance Manager role: Maintenance Manager oversees the upkeep, maintenance, and repair of an organization's facilities, equipment, and machinery to ensure smooth, reliable, and efficient operations. Essential or Primary / Key Responsibilities: * Hire, train, and supervise maintenance technicians, providing leadership and fostering a productive environment. * Create and implement preventive and corrective maintenance plans to reduce downtime and prevent costly breakdowns. * Enforce safety standards and protocols to maintain an accident-free work environment for the maintenance team and the organization. * Track and manage spare parts, components, and tools to ensure availability for maintenance tasks * Coordinate maintenance activities within individual departments to minimize interference with production schedule. * Assume responsibility for related duties as required or assigned. Additional Duties / Responsibilities: * Ability to lead, motivate, and develop a team of maintenance professionals. * Ability to evaluate machine resources and performance to ensure continued production. * May need to occasionally work flexible hours including night and weekends with little advanced notice. Minimum Required Qualifications: * Bachelor’s degree in Engineering or related field (relevant experience may substitute). * Experience: 8–10 years in industrial maintenance, with at least 5 years in a manager/supervisory role. * Ability to read technical manuals and drawings. * Strong mechanical knowledge and hands-on experience in maintenance tasks are crucial. * Valid State Driver's License/Insurance required for vehicle travel, as needed * Must be authorized to work in the U.S. * Must have the ability to travel Work Environment: * This is a full-time in-person position. * The primary work environment is a warehouse environment, with occasional visits to job locations. Please be aware that job site visits may involve exposure to various environmental conditions, including cold, heat, high noise levels, and heights and may require extensive walking or climbing. * Local, non-local, travel is required for this position, up to 15% of the time. Physical Requirements: * While performing the duties of this job, the employee at times may need to climb, reach, bend, lift and carry items * Regularly required to stand, sit, walk, and move about the facility and other locations * May be required to lift, push, pull and/or move items weighing up to 50 pounds * Ability to climb up ladders and get on a roof Comprehensive Benefits: * Health Insurance – medical/dental/vision * Life Insurance * Retirement plan (401) k * Vacation/Sick days * Flexible Spending Account (FSA) * Dependent Care Flexible Spending Account (DCFSA)

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC. • Read measuring tape, gauges, and calipers • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job Description Responsibilities: -Sets up and operates conventional, special purpose, and/or numerical control (CNC)machines and machining centers to fabricate metallic and nonmetallic parts. -Measures and marks dimensions and reference points on material or workpiece as guides for subsequent machining. -Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. -Sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. -Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required. -Verifies conformance of finished workpiece to specifications. -Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data. -Fits and assembles parts into complete assembly. -Verifies dimensions and alignment of assembly. Qualifications: -Mechanically inclined - Uses intuition and experience to complement assembly. -Must be attentive to detail. -Strong verbal communication skills needed. Responds to others and questions appropriately. Able to read and interpret written information. -Must be a team player and dependable - Must be consistently at work and on time. -Professionalism - Accepts responsibility for own actions. Applies feedback to improve performance. -Safety and Security - Observes safety and security procedures. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, etc. -Ability to apply common sense understanding to carry out instruction. -Must read, write, and understand English. Education: -Associate degree (A. A.) or equivalent from two-year college or technical school; or 6months to 1-year related experience and/or training; or equivalent combination of education and experience. Physical Demands: Frequently required to stand; walk; sit; use hands to handle feel, reach. May frequently lift and/or move up to 40 pounds. Uses close vision, distance vision, color vision, depth perception and ability to adjust focus.

Job Description Carter Smile is a pediatric dental & orthodontic practice in a single location. We are looking to hire an experienced pediatric dental assistant to join our energetic team. Our state-of-the-art facility utilizes the latest in technology, including Nomad, iTero, and CBCT, to provide our patients with the highest level of care available. Our practice has been professionally designed to create a happy and calming environment for both our team and patients alike. We pride ourselves on our upbeat and positive office culture, with our team leader being Callie, Dr. Carter’s adorable toy poodle, our certified therapy dog. We are looking to find a long-term teammate who shares our philosophy to provide the best possible care to our patients while delivering an unmatched experience from start to finish. Responsibilities Include: • Seat and welcome Doctor’s patients (includes helping create take home bag, choosing flavors and prepping patient/family prior to Doctor’s arrival), • Daily set up and end-of-day clean up, • Take X-Rays (Bitewings, PA, Pano, CBCT) -Assist Doctor’s with charting • Assist the Doctor with Operative Procedures (fillings, extractions, etc.) and help assist with orthodontic treatment (when needed) -Manage sterilization of pediatric and orthodontic instruments • Sterilization and prep clinical areas for the next patient, • Assist hygienists and ortho assistants with prep and cleaning of clinical area, • Help with weekly and monthly chair and sterilization machine maintenance -Help with inventory and ordering of pediatric dental supplies Qualifications: -Excellent time management skills • NJ X-ray license (CBCT, Panoramic, and Nomad machine), • Team Player with strong communication skills, • Ability to multi-task, • Must love dogs!!

Job Description We are seeking a skilled and experienced CNC Machinist to join our dynamic team. As a CNC Machinist, you will be responsible for setting up and operating computer numerical control (CNC) machines to produce high-quality precision parts. The ideal candidate should have a strong background in machining, be detail-oriented, and possess excellent problem-solving skills. This is a full-time position with opportunities for growth and advancement within our company. Responsibilities: • Set up and operate CNC machines to perform precision machining operations such as milling, turning, drilling, and grinding., • Study blueprints, sketches, drawings, manuals, or specifications to determine dimensions and tolerances of finished workpieces, sequence of operations, and setup requirements., • Select and install cutting tools, attachments, and accessories according to job requirements., • Load and unload workpieces and fixtures into the machine, ensuring proper alignment and secure clamping., • Monitor machine operations and make necessary adjustments to maintain quality and efficiency., • Inspect finished workpieces using precision measuring instruments to ensure conformance to specifications., • Troubleshoot and resolve issues that may arise during machining processes., • Perform routine maintenance on machines to ensure proper functioning and minimize downtime., • Collaborate with team members and engineers to optimize machining processes and improve overall productivity., • Adhere to safety guidelines and maintain a clean and organized work area.

Job Description Fire Extinguisher Technician About the Company Confires Fire Protection Service, LLC is a leader in the industry for providing fire protection services throughout New Jersey, Delaware and Philadelphia. Confires is based in South Plainfield, NJ, and has an excellent team that are responsible for delivering exceptional service to our customers for their fire system inspection, repairs and installation. We perform mandated inspections and repairs to fire alarm systems, automatic sprinkler systems, special hazard suppression systems, restaurant kitchen fire suppression systems, fire extinguishers and emergency/exit lights. The company is continually growing through its internal sales and marketing activities, strong reputation and business acquisitions. Visit our website to learn more about us, About the Opportunity Confires Fire Protection Service, LLC is currently seeking an Experienced Fire Extinguisher Technician. Job duties include inspecting, repairing and replacing Fire Extinguishers and emergency/exit lights, as well as preparing accurate and timely service tickets and reports. Compensation • Salary - this is an hourly position - pay is negotiable depending on experience, • Potential quarterly bonuses, • Perform inspections, maintenance and installation on fire extinguishers and emergency lighting for established customers on a scheduled basis., • Prepare accurate and timely inspection and service reports., • Must be able to communicate well with customers and explain the work being done and any repairs that are necessary., • Prior experience performing fire extinguisher inspection and maintenance., • Current valid driver's license with 3 or less points., • High School Diploma or equivalent required., • Be knowledgeable of hand tools such as pipe wrenches, channel locks, drills, etc, • Able to work nights and weekends for emergency services., • Take initiative, pursue opportunities, and tackle goals., • Quarterly Bonus Potential, • 401K with a company match, • Medical and Dental insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life Insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #Confires #Experienced #FireExtinguisher #Technician #SouthPlainfield #NewJersey

Job Description Lead Security Electronics Technician About the Company Confires Fire Protection Service, LLC is a leader in the industry for providing fire protection and security services throughout New Jersey, Delaware and Philadelphia. Confires is based in South Plainfield, NJ, with an additional office location in Elizabeth, NJ, and has an excellent team that are responsible for delivering exceptional service to our customers for their fire and security system inspections, repairs, and installation. We perform mandated inspections and repairs to fire alarm systems, burglar alarm systems, access control systems, as well as CCTV & video surveillance systems. The company is continually growing through its internal sales and marketing activities, strong reputation and business acquisitions. Visit our website to learn more about us, About the Opportunity Confires Fire Protection Service, LLC is currently seeking a Lead Security Electronics Technician for our Security Division. This position requires the ability to install, maintain, and repair electronic security systems, including CCTV and alarm systems. Job Duties • Installation: Installing and wiring security systems, including access control, CCTV, Gate systems, Intercom, and alarm systems, following blueprints and building plans., • Programming: Knowledge of programming various systems pertaining to CCTV, Intrusion, access control, intercoms, gate systems., • Maintenance: Performing regular maintenance, including cleaning, adjusting, and testing security equipment and systems., • Repair: Diagnosing and repairing malfunctions in security systems, troubleshooting hardware and software issues., • Testing: Conducting tests to ensure proper system operation, including testing circuits, sensors, and backup systems., • Troubleshooting: Identifying and resolving issues with security systems, CCTV, Access Control, Intercom, and gate systems., • Support: Providing technical support to users, explaining system functions, and assisting with troubleshooting., • Documentation: Maintaining records of system installations, configurations, and maintenance activities., • Integration: Integrating security systems with other safety and security subsystems, such as fire alarms or emergency systems., • Security Assessments: Assisting with security assessments and recommending equipment and systems upgrades., • Training: Training users on how to use and maintain security systems., • Safety: Adhering to safety protocols and codes during installations and repairs., • Inventory: Managing parts inventory and maintaining tools., • Technical Skills: Strong technical skills in electronics, electrical wiring, and security systems., • Problem-Solving: Ability to diagnose and solve technical issues., • Troubleshooting: Strong troubleshooting skills for security systems and equipment., • Communication: Effective communication skills for interacting with colleagues, clients, and vendors., • Customer Service: Ability to provide good customer service, especially in terms of training and support., • Blueprint Interpretation: Ability to read and interpret blueprints and schematics., • Pay is hourly and is negotiable dependent on candidate experience, • All hours worked between 6 pm and 5 am, paid at the time and half rate for every day of the week, • Paid 4 hour minimum at the time and half rate for emergency service calls, • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data. #Hiring #Security #ElizabethNJ #NJJobs #NewJerseyJobs #SecurityTechnician #AccessControl #CCTV #Alarms

Job Description Responsibilities: -Sets up and operates conventional, special purpose, and/or numerical control (CNC)machines and machining centers to fabricate metallic and nonmetallic parts. -Measures and marks dimensions and reference points on material or workpiece as guides for subsequent machining. -Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. -Sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. -Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required. -Verifies conformance of finished workpiece to specifications. -Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data. -Fits and assembles parts into complete assembly. -Verifies dimensions and alignment of assembly. Qualifications: -Mechanically inclined - Uses intuition and experience to complement assembly. -Must be attentive to detail. -Strong verbal communication skills needed. Responds to others and questions appropriately. Able to read and interpret written information. -Must be a team player and dependable - Must be consistently at work and on time. -Professionalism - Accepts responsibility for own actions. Applies feedback to improve performance. -Safety and Security - Observes safety and security procedures. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, etc. -Ability to apply common sense understanding to carry out instruction. -Must read, write, and understand English. Education: -Associate degree (A. A.) or equivalent from two-year college or technical school; or 6months to 1-year related experience and/or training; or equivalent combination of education and experience. Physical Demands: Frequently required to stand; walk; sit; use hands to handle feel, reach. May frequently lift and/or move up to 40 pounds. Uses close vision, distance vision, color vision, depth perception and ability to adjust focus.

Job Description Summary: A Medical Laboratory Technologist is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease. Responsible for operation of the laboratory. Hematology experience required. Night shift. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Bachelor degree in Biological, Chemical, Physical science or equivalent · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job Description Summary: A Medical Laboratory Technologist is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease. Responsible for operation of the laboratory. Microbiology experience required. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Bachelor degree in Biological, Chemical, Physical science or equivalent · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job Description Salary: $100000 - $135000 Pay Grade: 16 Other Forms of Compensation: ESFM is the corporate facilities management (FM) division of Compass Group USA, a Gold-level Corporate Sustaining Partner of the International Facility Management Association (IFMA), and a Platinum Corporate Member of the Association of Energy Engineers (AEE). ESFM self-performs 80% of all FM services provided to clients. Our portfolio of solution categories includes Facilities Maintenance & Engineering, ESG Programming, Laboratory Support Services, Janitorial & Industrial Cleaning, Landscaping & Grounds Management, Workplace Solutions and Managed Services. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. ESFM’s clients include many household names from the life sciences, technology, oil & gas and manufacturing markets. Job Summary The Chief Engineer will be responsible for leading, controlling, supervising, administering, and coordinating all hard facilities operations and maintenance of the facility and reporting to the Operations Manager. Also, the incumbent will provide administrative duties and support to other soft services such as custodial, client-facing staff and grounds maintenance. Duties include troubleshooting Facility, Production & Formulation equipment issues and to operate according to scheduled maintenance programs or repair activities, and ensuring Scientific equipment is working properly. You will be responsible for overseeing the maintenance and repair of the Facility, Demi-Grand, Pilot, and Lab equipment supporting building management. JOB DESCRIPTION • Proficient in troubleshooting electrical equipment and PLC’s., • Proficient in facility maintenance and equipment., • Oversee mechanical services including both Facilities and scientific areas FMO support., • Repair and maintain Facility, Production and Formulation equipment through means of preventive maintenance program., • Arrange Fabrication of machine parts as needed to keep equipment operational., • Maintain all equipment to meet with the facility and OSHA safety requirements., • Install and maintain equipment which directly supports Facility operations (DI Water, Compressed air, Chilled water)., • Ability to assist with set-ups and disassemble filling equipment as required by production scheduling ADDITIONAL RESPONSIBILITIES • Assist with the Coordination of services with outside vendors., • Assist with the coordination new equipment installations with manufacturers., • Maintain calibrations of equipment instruments through means of preventive maintenance program (ARCHIBUS) CMMS system., • Set up and maintain inventory of spare parts to keep downtime to minimum., • Maintain recommended spare parts inventory of all Demi-Grand equipment (Processing, Labs, Filling, Pre-weigh), • Conducting parts and equipment sourcing, • Assist Admin. with overseeing and placing and closing orders., • Participate in safety programs of the Demi-Grand (JSA, SHAP, MESUR, and EHS Inspections), • Provide technical support to DG, Pilot and Labs in support of equipment., • Oversee all BMS programs and offer support to facility mechanics. 6.4 Capabilities, • Understanding of advanced principles of air conditioning, refrigeration, and heating., • Working knowledge of boiler systems., • Proficient in balancing air and water treatment systems in line with HVAC protocols., • Proficient in mechanical and electrical installation of equipment, • Proficient in troubleshooting electrical equipment and PLC’s., • Proficient in facility maintenance and equipment., • Oversee mechanical services including both Facilities and scientific areas FMO support., • Repair and maintain Facility, Production and Formulation equipment through means of preventive maintenance program., • Arrange Fabrication of machine parts as needed to keep equipment operational., • Maintain all equipment to meet with L’Oreal and OSHA safety requirements., • Install and maintain equipment which directly supports Facility operations (DI Water, Compressed air, Chilled water)., • Ability to assist with Set ups and disassemble filling equipment as required by production scheduling. Apply to ESFM Services today! ESFM is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Eurest Services maintains a drug-free workplace. Associates at ESFM are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Req ID:1466569 ESFM Brandy Wilson

About Our Company We’re a physician-led, patient-centric network committed to simplifying health care and bringing a more connected kind of care. Our primary, multispecialty, and urgent care providers serve millions of patients in traditional practices, patients' homes and virtually through VillageMD and our operating companies Village Medical, Village Medical at Home, Summit Health, CityMD, and Starling Physicians. When you join our team, you become part of a compassionate community of people who work hard every day to make health care better for all. We are innovating value-based care and leveraging integrated applications, population insights and staffing expertise to ensure all patients have access to high-quality, connected care services that provide better outcomes at a reduced total cost of care. Please Note: We will only contact candidates regarding your applications from one of the following domains: @summithealth.com, @citymd.net, @villagemd.com, @villagemedical.com, @westmedgroup.com, @starlingphysicians.com, or @bmctotalcare.com. Job Description Essential Job functions: • Prepares and injects radiopharmaceuticals for diagnostic imaging procedures according to Nuclear Regulatory Commission regulations and department policies., • Measures concentrations of radioactive isotope in specific body areas to obtain information for use by the Radiologists in diagnosing patients’ illness., • Performs cardiac nuclear studies including stress MUGA, Thallium and non-gated Technetium studies. Assists physician with procedures as required., • Gives reports to physician for review/interpretation within the time frame specified by the department., • Programs computer for each procedure., • Documents reason for test and any known allergies., • Employs proper aseptic techniques in IV insertion and administration., • Manages nuclear schedule for best utilization of time, patient flow and patient needs. Performs daily/weekly quality assurance procedures, calibration and flood analysis on the equipment according to manufacturer’s guidelines., • Troubleshoots minor problems, reports other problems and those requiring repair service to Supervisor of Cardiology Techs, Clinical Manager and Physician., • Performs cardiac nuclear studies including stress MUGA, Thallium and non-gated Technetium studies. Assists physician with procedures as required., • Acquires clear images appropriate for the studies. Accurately gates the study when required., • Performs departmental surveys to ensure compliance with radiation standards for SMG, NRC, and EPA., • Follows proper procedures for spill and decontamination; reports contamination to appropriate authorities and regulatory commissions., • Orders and logs appropriate information regarding receipt of radioactive materials and pharmaceuticals and dispose of radioisotopes according to industry standards and regulations., • Updates nuclear Policies and Procedures to reflect current techniques and best practices. Adheres to the nuclear/ProSolv workflow including preparing the preliminary report for the Cardiologist., • Archives images according to SMG procedure. General Job Functions • Perform QA on a daily basis, as required., • Demonstrates understanding of emergency procedures., • Demonstrates knowledge of safety-related work behaviors to ensure safe job performance and maintenance of safe work environment., • Other duties as required. Education, Certification, Computer And Training Requirements • High School Diploma/GED required. Associates or Bachelor’s degree preferred., • BLS certification required., • 0 – 1 years’ experience. 2-4 years’ experience preferred., • IV Certification required. ARRT and CNMT required., • Ability to perform nuclear medicine procedures., • Ability to prepare and inject radioactive isotopes., • Ability to communicate in English, both orally and in writing required., • Strong interpersonal and organizational skills required. Ability to perform diverse work assignments with time limitations with a high degree of accuracy required., • Ability to use problem solving, critical thinking and priority setting skills required. Experience with Imaging Equipment, Dose Calibrator, Geiger counter – cutie pie CGM meter preferred., • Experience with Well & Probe Uptake System and Lead Syringe Shields & Lab Coats preferred., • Experience with Standard Office Equipment (Phone, Fax, Copy Machine, Scanner, Email/Voice Mail) preferred., • Experience with Standard Office Technology in a Window based environment preferred. Travel Ability to commute to satellite offices as needed. Pay Range: $46.73 - $58.41 Hourly The provided compensation range is based on industry standards and salary determinations will be made based on numerous factors including but not limited to years of experience and location of position. About Our Commitment Total Rewards at VillageMD Our team members are essential to our mission to reshape healthcare through the power of connection. VillageMD highly values the critical role that health and wellness play in the lives of our team members and their families. Participation in VillageMD’s benefit platform includes Medical, Dental, Life, Disability, Vision, FSA coverages and a 401k savings plan. Equal Opportunity Employer Our Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to, and does not discriminate on the basis of, race, color, religion, creed, gender/sex, sexual orientation, gender identity and expression (including transgender status), national origin, ancestry, citizenship status, age, disability, genetic information, marital status, pregnancy, military status, veteran status, or any other characteristic protected by applicable federal, state, and local laws. Safety Disclaimer Our Company cares about the safety of our employees and applicants. Our Company does not use chat rooms for job searches or communications. Our Company will never request personal information via informal chat platforms or unsecure email. Our Company will never ask for money or an exchange of money, banking or other personal information prior to the in-person interview. Be aware of potential scams while job seeking. Interviews are conducted at select Our Company locations during regular business hours only. For information on job scams, visit, or file a complaint at .

Job DescriptionSalary: 15.13 CLIENT SERVICES TEAM Short Hills, NJ Reports To: Studio Manager Employment Status: Part Time/Non-Exempt KEY RESPONSIBILITIES • Greet and engage clients in a positive and friendly manner, • Provide the highest level of client/customer service and hospitality to all clients/prospective clients, • Share pricing and class information with prospective clients, • Deliver Megaformer machine demos to new clients, • Complete studio tours with new clients, • Work alongside and support SLT instructors to ensure a successful and seamless client check-in and class experience, • Ensure complete knowledge of Mariana Tek system, • Assist Management with day-to-day operations of the studio, • Ensure prompt response to studio emails; notify Studio Manager if needed, • Understand SLT product knowledge, policies and procedures for retail operations, • Complete basic Megaformer machine maintenance, • Actively maintain studio cleanliness and organization between each class so each client receives the best SLT experience, • Assist in retail inventory at the end of the month, • Complete opening and/or closing checklists, • Perform other studio duties as needed QUALIFICATIONS • Mariana Tek software experience a plus, • Leadership experience a plus, • Must have superior customer service skills, • Must have excellent interpersonal skills and a service-oriented outlook, • Must be highly organized, • Ability to work independently as well as on a team, • Should have a strong ability to communicate clearly with team members, clients and senior management, • Must be able to move and/or lift heavy items, up to 50 lbs. WORK REQUIREMENTS • Must be available to work:, • Minimum of three shifts per week; minimum 4 hours each, • Ability to work flexible hours; early morning/late night/ weekends, • Some holidays (open year-round) SLT actively seeks a diverse applicant pool in order to build the strongest possible team. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Unit 8270 - [Busser / Porter / Kitchen Staff] As a Dishwasher @ CPK you will: Be responsible for keeping the kitchen clean and organized; Focus on keeping the dishes and silverware clean and sanitized; Perform routine maintenance and cleaning on dish machine and related equipment.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Job DescriptionSalary: The pay is commensurate with experience About the Organization: AEIS-Atlas Evaluation & Inspection Services is a leading engineering inspection and construction materials testing company in the NY Metro Area. We offer a unique work culture that blends professionalism with a strong focus on learning. Our founder's vision of a "Learning Organization" still drives us today. At AEIS, we lead with empathy and strive to develop leaders who, in turn, help others grow. We are an Equal Opportunity Employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected category. We comply with E-Verify and are a federal drug-free workplace. Join the AEIS family by applying today! Learn more at . Job Responsibilities: • Drive and transport samples and personnel around the NY Metro Area using company vehicles (Ford F-150, F-250, F-350, and similar)., • Complete all pickups and deliveries as assigned; ensure timely delivery to customers., • Keep daily/weekly driver logs and maintain mileage records., • Monitor and follow the maintenance schedule for all company vehicles., • Provide regular updates on your activities and location to the manager for work coordination., • Make daily calls to the department manager to report progress on tasks., • Pick up and deliver construction materials and equipment as needed., • Assist with office purchases and other administrative tasks., • Use navigation apps and GPS devices to find the most efficient routes; extensive knowledge of the NY Metro Area is a plus., • Interact with clients professionally and maintain positive relationships with them and inspectors., • Maintain an organized travel schedule., • Ensure vehicles have sufficient gas and are always ready for use., • Arrange vehicle repairs and conduct regular vehicle maintenance checks. Work Environment: • You'll work on active construction sites and occasionally in a soils/concrete testing lab, so expect to get dirty and work outdoors in various weather conditions., • Tasks may include handyman/landscaping duties, coring concrete/asphalt samples, and assisting construction material and machine shop personnel. Physical Requirements: • Long periods of standing and repetitive motions are required., • Ability to use hands for tasks such as handling, climbing, balancing, crouching, stooping, crawling, kneeling, and sitting., • Good vision (close, distance, peripheral, and depth perception) and sense of smell., • You may drive hundreds of miles per day and regularly lift/move up to 50 pounds, frequently move 60-80 pounds, and occasionally more than 100 pounds (like a loaded wheelbarrow of concrete samples). Qualifications: • 3+ years of driving experience in similar vehicles, with at least 1 year of driving experience in NYC., • Basic math skills., • Strong communication skills in English, both oral and written., • Ability to read maps and follow directions accurately. Job Details: • Job Type: Full-time, • Pay: From $18.00 per hour, • Expected Hours: 40 50 hours per week, • Day Shift: Starts at 5:30 a.m., • Location: In-person Benefits: • 401(k) matching, • Health insurance, • Paid sick time, • Parental leave, • Tuition reimbursement, • Vision insurance

Keurig Dr Pepper - JobID: 82908504144 [Field Technician / Maintenance Technician] As a Mechanic at Keurig Dr Pepper, you'll: Analyze mechanical, pneumatic, hydraulic or and make repairs through adjustments, defective parts replacement, or fabrication; Weld various types of metals; Machine most metal

Office Service Representative III. Prepare special outgoing inter-office pouches sent to client affiliates as scheduled (if applicable). May provide minor maintenance of photocopy machine such as solving paper jams, placing service calls and routine cleanings.

Essential Functions \n\n • Follow, without exception, all safety policies /safety rules, and procedures. \n, • Follow all work instructions, both written and oral. \n, • Required to keep shop and work areas in a safe and tidy condition, following 6S standards. \n, • Required to perform all facility maintenance. \n, • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties.\n, • Ability to trouble shoot/solve mechanical breakdowns in areas consisting of old and new equipment, while communicating with production and maintenance manager.\n, • Perform mechanical repairs and replace parts on machines such as bearings, valves, filters, gauges, switches, etc.\n, • Perform routine preventive maintenance on all production equipment and machinery, such as a resistance welder, seamer, automated paint booth, conveyors, curing ovens, etc.\n, • Assist in machine changeovers and start-up of machines for production needs when required.\n, • To identify improvements, advise and correct potential problems.\n, • Assist in maintaining safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency. \n, • Perform and oversee electrical troubleshooting (AC/DC motors, controls panels motor drivers, etc.) \n, • Ability to use ladders, scissor lift, forklift, milling machine, lathes, drill presses, welder and hand tools to complete repairs.\n, • Ability to use precision measuring devices including amp meters, electric meters, hydraulic gauges, Etc.\n, • Lead/coach and mentor maintenance technicians fostering skilled development and productivity.\n, • Assign daily tasks and prioritize maintenance work orders in alignment with production needs.\n, • Teach expertise of equipment in diagnostics and trouble shoot while providing guidance and training for all maintenance techs\n, • Recommend process and equipment improvements and enhance safety, efficiency, and product quality.\n, • Collaborate with management and other departments on cross functional initiatives.\n, • Industrial Maintenance Millwright Certificate or Qualified Mechanic.\n, • 4-6 years of direct hands-on experience with production equipment maintenance and repair. \n, • Electrical knowledge of 3 phase and DC systems.\n, • Knowledge of industrial electrical, control, and instrumentation systems. Examples include control relay logic; voltage control schemes; photo-eyes; distance and pressure transducers; etc.\n, • Forklift Certified - Ability to operate a forklift safely to eliminate personal injury and material damage.\n, • Ability to lift 55 lbs. overhead, climb, bend, stoop, push and pull.\n, • Must possess excellent communication skills, professional maturity, and a proactive mindset.\n, • Requires good eye/hand/foot coordination.\n, • Good visual acuity – cannot be colorblind.\n, • Must be able to stand for extended periods.\n, • Must be able to work in cold, heat and dusty environment; it includes occasional work outside in the elements.\n, • Ability to safely operate all equipment and tools.\n Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us!\n\n \n\n\n Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. \n Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job Description • We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview., • Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required., • Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability., • Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment., • Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational., • Recommends appropriate sources of electrical power for new installations or renovation projects., • Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc., • Performs corrective maintenance in accordance with the work order system., • Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner., • Maintains clean and safe work environment; performs job safely., • Exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license., • Valid current state/local electrical license., • Two years of trade school or related experience., • Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation., • Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description JOB SUMMARY: We are currently seeking motivated and detail-oriented professionals to join our firm. Multiple opportunities are available within our New Jersey and Pennsylvania Foreclosure groups for qualified candidates with experience or interest in foreclosure, legal services, or administrative support. DUTIES & RESPONSIBILITIES MAY INCLUDE: • Preparing, reviewing, and filing legal documents, • Managing foreclosure files and tracking case progress, • Communicating with clients, courts, vendors and other outside parties in a courteous and effective manner., • Data entry, document processing, and file maintenance, • Supporting attorneys and other team members with daily tasks, • Ensuring compliance with state and federal regulations, • Performing general administrative duties as needed, • Developing and maintaining congenial relationships with business associates and clients., • Consistently and accurately updating the firm’s internal case management system, as well as all client systems., • Providing exceptional customer service to clients at every level of interaction., • Previous experience in a legal, real estate, or financial services setting is a plus, • Strong organizational skills and attention to detail, • Excellent written and verbal communication skills, • Proficiency in Microsoft Office and document management systems, • Ability to work independently and as part of a team This job does not require supervisory responsibilities. EDUCATION & WORK EXPERIENCE: • Minimum of a High School Diploma; preferably an associate’s degree in legal services or finance., • 2 years of relevant work experience preferred but the right candidate with less experience may be considered., • Must have excellent verbal and written communication skills., • Must be committed to providing exceptional customer service., • Ability to communicate courteously and effectively with borrower, clients, attorneys, other internal employees, and outside parties., • Must be able to work with others in a congenial and team-oriented manner., • Must possess exceptional organizational skills; the position requires the ability to multi-task and be adaptable to continual change., • Ability to read and write at a high level for proof reading and editing purposes., • High-level proficiency in MS Office suite., • Proficiency in internet research activities., • Familiarity with case and document management software, • Experience with client systems such as Loansphere, Lenstar, Clairfire, Tempo, Vendorscape and others is preferred., • Good understanding of the legal process surrounding foreclosure preferred., • Experience with review of title reports and identifying chain of title issues is a plus The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to sit, talk, or hear. The employee is occasionally required to stand, walk, use hands to finger, handle, or feel; reach with hands and arms, and stoop, kneel, or crouch, the employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job: Normal office working conditions, with quiet to moderate noise level within the work environment. We offer a comprehensive compensation package, which includes a salary commensurate with experience and accomplishments. If you possess the requisite qualifications and are seeking the challenge of working in a growing firm, please submit your resume in confidence. All applicants applying for U.S. job openings must be authorized to work in the United States. Because of the high volume of calls received, only qualified candidates will be contacted for consideration. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties to meet the ongoing needs of the organization. Company DescriptionMcCalla Raymer Leibert Pierce, LLP has historically represented over 350 financial institutions nationwide. With its finger to the pulse of the financial services industry, the firm works with legislators on both the state and federal level to assure quality legislation, particularly for it's mortgage servicing clients. The firm’s unique ability to meet the specific needs of clientele, combined with industry perspective, experience, team approach, and personalized attention, assures clients cost effective and comprehensive legal counsel. McCalla Raymer Leibert Pierce, LLP is passionate about fostering an environment that supports both personal and professional development. Our most valued investment is human capital. The firm is an Equal Opportunity Employer committed to diversity in the work place.McCalla Raymer Leibert Pierce, LLP has historically represented over 350 financial institutions nationwide. With its finger to the pulse of the financial services industry, the firm works with legislators on both the state and federal level to assure quality legislation, particularly for it's mortgage servicing clients. The firm’s unique ability to meet the specific needs of clientele, combined with industry perspective, experience, team approach, and personalized attention, assures clients cost effective and comprehensive legal counsel.\r\n\r\nMcCalla Raymer Leibert Pierce, LLP is passionate about fostering an environment that supports both personal and professional development. Our most valued investment is human capital. The firm is an Equal Opportunity Employer committed to diversity in the work place.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure Additional Information Physical: Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Ability to lift up to 50 lbs. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $17.45 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description Summary The Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Machine Operator must be able to operate and oversee specialized automated packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated packaging equipment, therefore an understanding of mechanical and electrical systems is required. The Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Extensive use of hands, including repetitive movements Additional Requirements: • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry, • Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time #ENGHP

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Elizabeth, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR ghOF4vx4rs

Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines.

Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will a

Job Title: Filtration Production Operator Location: Piscataway, New Jersey Type: Contract Compensation: $21 hourly Contractor Work Model: Onsite Hours: 3rd Shift- 10PM to 6:30AM Duties and Responsibilities: Operate one or more pieces of filtration equipment across the Dispensing Department according

Job Title: Material Handler Location: Piscataway, New Jersey Type: Contract Compensation: $21 hourly Work Model: Onsite Hours: 8:00AM - 5:00PM Responsibilities Check inventory according to customer requests using the data general computer system.Drive forklift to move products from racks to shipping

RUTHERFORD ST [Warehouse Associate / Forklift Operator / Up to $29.As a Forklift Operator at Costco, you'll: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand stack product from partial pallets onto full pallets of productEnjoy a compre

Aerotek - JobID: JP-005603387 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Aerotek, you'll: Be responsible for loading, unloading, moving, and stocking; Perform staging of products and materials; Use a forklift, clamp truck, or other power equipment.

UNFI - [Warehouse Associate / Forklift Operator] As a Forklift Operator at UNFI, you'll: Operate a forklift in accordance with Company standards and procedures including quality standards and safety regulations; Be responsible for moving product; Inspect assigned lift and complete vehicle inspection

Americold - JobID: 57488 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Americold, you'll: Operate forklift to move and stack materials; Load and unload trucks; Maintain inventory accuracy; Follow safety procedures; Keep work area clean and organized; Assist with other warehouse

PrideStaff - 544206 [Warehouse Associate / Forklift Operator] As a Forklift Operator at PrideStaff, you'll: Unload materials and merchandise from incoming vehicles and stack them in assigned places; Locate and move stock of products to pallets or crates for storage or shipment; Identify damages and

Cintas Corporation - JobID: 1333342500 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

PrideStaff - 555310 [Warehouse Associate / Forklift Operator] As a Forklift Operator at PrideStaff, you'll: Unload materials and merchandise from incoming vehicles and stack them in assigned places; Locate and move stock of products to pallets or crates for storage or shipment; Identify damages and