Maintenance and repair jobs in Atlanta, GA - Page 7Create job alerts

Job Description McKenney's Inc. is seeking Plumbing Service Technicians to join our team in Atlanta, GA. We are a thriving company with over 75 years of exceptional service to the Southeast. Plumbing Service Technicians will be required to perform skilled work in the installation, repair, and maintenance of Plumbing systems. Under the direction of the service operations manager a technician will install, diagnose, inspect, repair, maintain and service a wide variety of plumbing systems. DUTIES & ESSENTIAL JOB FUNCTIONS: • Install, diagnose, inspect, repair, maintain, and service a wide variety of plumbing systems., • Repair; troubleshoot and maintain domestic hot and cold-water systems., • Must understand various drainage and vent systems and the ability to repair, maintain and troubleshoot., • Identify different piping materials and proper tools and methods for repairing and installing the different materials., • Soldering, brazing, threading and pro-press., • Installation and repair of plumbing fixtures and appliances., • Installation and repair of gas piping., • Basic electrical knowledge for appliances, lift stations, and water heaters., • Safely operate drain cleaning and inspection equipment such as, jetter, sewer camera, and drain machines., • Determine requirements for parts, materials, supplies, tools and equipment; establish cost of repairs and equipment replacement; check and test new equipment., • Operate specialized machinery, equipment and tools utilized in the repair and maintenance of plumbing systems., • Backflow Preventer installation, repair, and inspections., • Maintain tools, equipment, and supplies in a safe and orderly condition., • Minimum 3 years of Apprentice School or a Technical School degree, or a combination of on job experience., • Knowledge of Standard practices and theory of the plumbing trade, • Backflow Certification, • Journeyman or Master Plumbing license, • Medical Gas Certification., • Confined space certification., • Experience with operating heavy equipment., • Knowledge of Health and Safety regulations, • Must Observe legal and defensive driving practices, • Ability to perform skilled mechanical maintenance duties in the inspection, repair, and maintenance of plumbing systems., • Ability to interpret and work from plans, diagrams, blueprints, shop drawings, sketches, and specifications, • Ability to follow oral/written instructions and directions, • Must be able to operate specialized machinery, equipment and tools utilized in the repair, and maintenance of plumbing systems., • Must communicate effectively both orally and in writing., • Must be able to work cooperatively with others., • Must be able to work independently with little direction, • Must meet schedules and time lines, • Ability to climb and work at heights, walking, and standing for extended periods of time, lifting, bending, pushing, and moving objects up to 75 pounds., • Ability to work in both indoor and outdoor environments; must also be able to drive in various conditions to conduct work., • Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises. Work environment involves some exposure to construction, mechanical and electrical-related hazards or physical risks, which require following basic safety precautions., • Work requires local and occasional out-of-town travel to job sites and customer locations, • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and scaffolds and to negotiate work areas under construction. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR J30aMTr2YW

Job DescriptionCompensation: • $30.00 - $45.00/hour, • Paid OEM Training, • Comprehensive benefits including medical, dental, vision available from start, • Paid Time Off, Sick Time and Vacation, • Matching 401(k) etc., • Company credit card + travel perks/points, • Per-diem Shift: • Day shift, Monday to Friday with ample overtime + occasional on-call. MasterTech is on the search for entry-level Industrial Technicians based near an International Airport, requiring extensive travel to customer locations. Field Service Techs will be responsible for the on-site installation and support of mechanical and electrical components and systems, ensuring the machinery is properly installed and operational. Detail-oriented Field Service Techs are responsible for the on-site maintenance, diagnostics, and repair of machinery along with reporting issues and completing documentation. Key Qualifications: • Previous printing, corrugated, prepress, postpress, flexo presses, folding and other printing/boxing equipment is extremely beneficial., • Experience in industrial, manufacturing, and/or any kind of mechanical maintenance is preferred., • Experience with electrical systems is a definite asset; AC & DC as well as three-phase wiring., • Knowledge of SPS Programming, automation technology and drive technologies., • Ability to conduct installation, diagnostics, troubleshooting, programming, repairs and provide recommendations., • Maintain up-to-date training while providing remote support., • Excellent customer service skills and communication., • Exceptional problem solving, troubleshooting, diagnosis and documentation. MT1

Job Description Golf Course Equipment Repair Technician 18 hole private club located in North Atlanta. Repair and preventive maintenance on all golf course & grounds equipment Job Overview: Repairs and maintains landscape-related equipment. Trucks, mowers, chainsaws, trimmers, etc...Maintains equipment inventory and equipment maintenance. Job Description: • Repair and Preventive Maintenance on all types and styles of Golf Course Equipment We offer an excellent work environment, uniforms, health, dental, vision, and life insurance 401(k) with company match. Alongside great growth and development opportunities. Send resume to Don Lanning () or call 404-231-6912 for more information. Descripción del Puesto: Repara y da mantenimiento al equipo relacionado con el paisajismo: camiones, cortadoras de césped, motosierras, desmalezadoras, etc. Mantiene el inventario del equipo y realiza mantenimiento preventivo. Descripción: Reparación y mantenimiento preventivo de todo tipo y estilo de equipos de campo de golf. Trabajo al aire libre. Beneficios: Campo privado de golf de 18 hollos. Localizado en el norte de Atlanta. Esta buscando tecnico en reparaciones de todo tipo de maquinas que se utilize en el mantenimiento del campo. Se le ofrecera tiempo extra en el verano: que es el tiempo mas ocupado del ano. Se le proveera herramientes, beneficios de salud, como ojos, dental, aseguranza de vida, plan 401K y dias de enfermedad se le pagara. Por favor mandar su resume a Don Lanning () o llamar al 404-231-6912 para mas informacion. All job applicants at this company who have been offered employment will need to undergo testing for the presence of illegal drugs as a condition for employment. Powered by JazzHR KPcSXCq1CN

The position is a general maintenance position.Responsibilities include the maintenance, minor repair, and up-keep of plumbing fixtures and electrical devices and appliances in all campus facilities and the immediate grounds.Some minor carpentry work is required.Essential Duties and Responsibilities

SUMMARY: As part of the Flood Brothers Team, the Fleet Mechanic is responsible for the maintenance and repair of all company owned vehicles which includes Box Trucks, Semi Trucks, passenger vans, and trailers. SCHEDULE: This is a full-time position that requires flexible hours with occasional weekend, evening, and holiday work. Regular, predictable, full attendance is an essential function of this critical position. COMPETENCY • Strong analytical and mechanical skills, • Problem solving, • Time Management, • Effective interpersonal relationship skills, • Computer literacy ESSENTIAL FUNCTIONS: • Maintain and repair fleet equipment and perform scheduled preventative maintenance, • Diagnose vehicle failures, disassemble, repair and reassemble parts as necessary, • Complete all necessary documents and input all required information into the fleet maintenance software (Samsara for vehicle record keeping), • Must respond to service repairs in the field, • Coordinate any tows required back to the Flood Brothers shop, • Arrange any mobile tire replacements as required, • Inspect, analyze, troubleshoot, diagnose and perform minor to complex repairs for all types of equipment, • Must be able to perform all work adhering to DOT, OSHA, and Flood Brothers safety and maintenance policies, • Communicate with the Operations Department regarding vehicle issues, repair statuses, and vehicles required for service., • Make and received calls from drivers regarding vehicle issues and down vehicles, • Maintain a clean and safe work environment PREFERRED SPECIALTIES: • Experience with repair/replacement of lift gates, • Using diagnostic computer software, • Proficient with wiring diagrams PHYSICAL REQUIREMENTS: The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period, • The employee is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls, • The employee must be able to work safely at heights using applicable ladders and elevated working platforms, • The employee must be able to safely work in all weather conditions, • Given the frequent movement of large trucks through the workplace, the employee must be able to see and hear in order to safely navigate the work environment, • The employee must be able to regularly lift and/or move up to 50lbs and occasionally lift and/or move up to 100lbs QUALIFICATIONS: • High School Diploma or equivalent, • 3+ years on fleet maintenance experience, • Valid Driver’s License with no major moving violations in the past 5 years, • CDL not required but preferred, • Must be able to pass DOT Physical and drug test, • Own or possess the tools required to accomplish the essential job results required TRAVEL REQUIRED None. Travel requirements are subject to change based on business needs. OTHER DUTIES Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

About ITA Group ITA Group creates powerful moments that drive engagement and performance for some of the world’s most respected brands. We believe in the power of experience - whether for clients, team members, or guests. We’re looking for a Workplace Experience Manager to help us create a welcoming, inspiring, and high-functioning environment that reflects our values and supports our people. The Role: Workplace Experience Manager As the Workplace Experience Manager, you’ll be the heart of our office environment - delivering exceptional hospitality, seamless operations, and a sense of community. You’ll ensure our facilities are safe, functional, and inspiring, while also creating moments of delight that make our workplace a destination. This role blends hospitality, operations, and leadership - perfect for someone who thrives on service, organization, and creating meaningful experiences. Schedule • On-Site Role:, • 32 hours per week – Monday – Thursday, with flexibility for events and special needs What You’ll Do Client & Team Member Experience • Create a consistent, high-touch hospitality experience for guests and clients, • Manage client visits from agenda creation to catering and special accommodations, • Conduct regular audits of conference rooms and common areas to ensure functionality and cleanliness, • Serve as the go-to for conference room technology support, • Coordinate and execute team member experiences and corporate events, • Oversee day-to-day facility operations, maintenance, and cleanliness, • Coordinate repairs, inspections, and vendor relationships, • Manage office furniture moves, inventory, and workspace optimization, • Maintain up-to-date records of office supplies and equipment, • Serve as liaison with property management for repair and maintenance issues, • Ensure safety, security, and emergency preparedness protocols are in place What You Bring • Bachelor’s degree in a business-related field or equivalent experience, • 3+ years of experience in a service-related industry (hospitality or facilities preferred), • Strong organizational and time management skills, • Effective negotiation and vendor management skills, • Excellent interpersonal and communication abilities, • Customer-first mindset with a passion for creating positive experiences, • Familiarity with facility systems (e.g., LightEdge, Everbridge) a plus, • Ability to work independently and manage multiple priorities, • Willingness to work flexible hours to meet project needs

• Work Exclusively on Luxury European Brands, • Showcase Your Expertise, • Cutting-Edge Tools & Technology, • Be Part of a Growing Team, • Competitive Opportunity for Skilled Technicians Our client is a leading pre-owned car dealership specializing in high-quality European brand vehicles. With a commitment to excellence and customer satisfaction, they have built a reputation for offering unparalleled service and expertise. Their team is dedicated to maintaining the performance and luxury that owners of European brand cars, such as BMW and Mercedes, expect and deserve. Job Description: They are currently expanding and seeking a Master Certified Auto Technician with a strong background in European brand vehicles, specifically BMW and Mercedes, to join their team. The successful candidate will be responsible for performing diagnostics, maintenance, and repairs to ensure vehicles meet the highest standards of performance and reliability. Experience with electrical diagnostics a plus. Qualifications ● ASE Master Certified (or equivalent) with current certifications in multiple automotive specialties. ● Minimum 5-10 years of professional experience diagnosing, repairing, and maintaining a wide range of vehicle makes and models. ● Advanced diagnostic skills, including use of OBD-II scanners, manufacturer-specific software, and electrical testing equipment. ● Proven ability to perform complex repairs on engines, transmissions, braking systems, suspension, steering, HVAC, and advanced electronics. ● Strong understanding of manufacturer service procedures, technical bulletins, and warranty repair guidelines. Key Responsibilities: ● Conduct thorough diagnostics to accurately identify and resolve issues in European brand vehicles, with a focus on BMW and Mercedes. ● Perform routine maintenance and services, including oil changes, brake repairs, and tire rotations, adhering to manufacturer specifications. ● Complete repairs and replace parts as needed, ensuring work is done efficiently and to the highest quality standards. ● Communicate effectively with the service team and customers, providing updates and explanations on service recommendations and work performed. ● Stay up-to-date with new technology and techniques in automotive repair, especially pertaining to European luxury vehicles.

Job Title: Technician I Location: College Park, GA Zip Code: 30337 Duration: 6 months Job Description: The Shop Technician provides service and repair of mechanical, electronic and other equipment requiring technical knowledge and expertise, effective diagnostic and repair techniques and procedures related to a wide variety of equipment. DUTIES AND RESPONSIBILITIES This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. • Performs skilled technician work that involves diagnosis, replacement, repair and rebuilding a variety of equipment, components and/or systems., • Uses diagnostic equipment and a variety of tools specific to the trade., • Applies principles and practices of electrical and electronics theory., • Interprets and follows technical manuals, blueprints, mechanical drawings, and schematics., • Applies knowledge of the design and function of equipment., • Follows industry/government specific guidelines, particularly as they relate to safety, health and environmental practices., • Assists with research and development of new repair capabilities; this will include reading and understanding new manuals and may include on and off-site training., • Assists with the maintenance of shop equipment and supplies., • Makes computer entries and completes various types of paperwork maintenance documents such as Service Reports and 8130-3"s in accordance with FAA Regulations and company policies.

Job Title: Technician I Location: College Park, GA Zip Code: 30337 Duration: 6 months DUTIES AND RESPONSIBILITIES This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. • Performs skilled technician work that involves diagnosis, replacement, repair and rebuilding a variety of equipment, components and/or systems., • Uses diagnostic equipment and a variety of tools specific to the trade., • Applies principles and practices of electrical and electronics theory., • Interprets and follows technical manuals, blueprints, mechanical drawings, and schematics., • Applies knowledge of the design and function of equipment., • Follows industry/government specific guidelines, particularly as they relate to safety, health and environmental practices., • Assists with research and development of new repair capabilities; this will include reading and understanding new manuals and may include on and off-site training., • Assists with the maintenance of shop equipment and supplies., • Makes computer entries and completes various types of paperwork maintenance documents such as Service Reports and 8130-3"s in accordance with FAA Regulations and company policies

As a director of physical resources, you will lead and direct maintenance and operational teams while developing and implementing comprehensive strategies. You will recruit, train, and evaluate maintenance operations personnel in a positive work environment to foster professional growth and teamwork. You will supervise and direct staff in areas including physical resources administration, general building maintenance, dormitory maintenance, construction and renovation management, and grounds maintenance. You will also negotiate and manage contracts and relationships with external vendors, contractors, and service providers to ensure their work meets SCAD standards and project specifications. In this role, you will establish building management plans, capital improvements, and preventive maintenance programs. You will develop and implement building management policies and procedures to ensure safety and regulation compliance. Likewise, you will implement energy efficiency and sustainability initiatives. You will oversee the inspection, maintenance, and repair of buildings, systems, infrastructures, and equipment to ensure optimal operations while minimizing downtime and disruptions. Additionally, you will manage the work order system, focusing on efficient operation, timely responses, and cost tracking. In this position, you will prepare and manage building budgets; monitor expenditures to ensure efficient resource use; and procure supplies, equipment, and services in accordance with purchasing policies. You will ensure adherence to local, state, and federal safety regulations and protocols, perform regular safety inspections to implement corrective measures, and maintain compliance with EPA standards for the proper handling and disposal of hazardous materials. Additionally, you will keep meticulous records and respond to emergencies, including natural disasters, equipment failures, and security concerns. As a director of physical resources, you will maintain access to building controls and keys through the lock and key department, oversee pest control and waste management, and manage fleet vehicles and drivers to ensure compliance with state and local requirements. You will serve as a primary contact for facility-related issues and communications. You will collaborate with internal departments to understand and address their building needs and prepare and present reports to management on building performance and initiatives. Other duties may be assigned, including supporting university events, exhibitions, and other student programming. The successful candidate will have an exceptional knowledge of building systems, construction, and maintenance practices. The candidate will demonstrate excellent leadership, team management, and problem-solving skills. They will also display a strong attention to detail and an ability to analyze data to make sound decisions. Minimum Qualifications: • At least seven years of professional experience in facilities management, construction management, or a related field, • Experience in a leadership role, • Proficiency in using facilities management software and tools, • Proficiency in budgeting, financial management, and contract negotiation, • Bachelor's degree in facilities management, construction management, engineering, business administration, or a related field ADA Tag: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications.

Job Description • Responsible for installing, calibrating, configuring, testing, maintaining, evaluating, troubleshooting, pre-commissioning, commissioning and repairing as necessary, waste water equipment manufactured by, but not limited to Huber Technology Huber equipment, pumps, motors, valves, polymer stations, etc., • Perform scheduled maintenance or repair of the equipment and all other associated equipment, • Perform unscheduled maintenance or repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Review blueprints, plans, specifications and other customer documentation to prepare for startup or service., • Responsible for on-site training of customer personnel to Huber Technology standards., • Build customer relationship in a professional manner through solution-oriented communications and service, providing both on-site and telephone support., • Work with engineering, project management group, spare parts group and management to resolve escalated problems, • Provide written reports to the Director of Service on all activities carried out on site and complete all required documentation in a timely manner., • Provide expense reports to the Director of Service on all expenses occurred out on site and completes all required documentation in a timely manner., • Make technical recommendations to maintenance technicians and or treatment plant operators., • Work closely with the Director of Service, Aftermarket Sales Team and Operations Team, to ensure that site work is carried out in the required order, for completion by the required time., • To develop and maintain at all times due regard for safe working practices on site and to report any breaches of health & safety manners to the Environmental Health and Safety Coordinator and/or the Director of Service., • To undertake any appropriate technical activities that may not be related directly to site, as may be allocated to you from time to time by the Director of Service., • To ensure that materials, tools and equipment provided to you to carry out your work are kept safe, secure and in good order., • Ensure all tools and equipment is relevant, up to date and calibrated in accordance with Huber Technology requirements., • Assist when needed in manufacturing or engineering with customer projects as well as unit refurbishment or replacement at the customer site or Huber Technology manufacturing facility., • Properly document, label, and return all defective parts utilized in the repair of the equipment, • Educate the customer on basic operation of their equipment, • Assist when needed in the parts department with recommending spare parts and wear parts to existing and new customers, • Perform all welding activities that are required in the shop and/or customer site, • To take responsibility for ensuring that all necessary travel, medical and associated documentation is valid and kept up to date and to inform the Field Service Manager in adequate time to procure any replacements, • Provide in-depth troubleshooting via phone with customers in the field, • Provide technical assistance to all representatives of Huber Technology, Inc. in the field, • Assist customers with via phone and in the field with on application and process related issues, • Assist the Director of Service, V.P. of Operations and Aftermarket Sales Consultants with identification of warranty vs. non-warranty issues, • Maintain a professional appearance towards customers on the telephone and by correspondence as well as in person, • Take responsibility for ensuring that all necessary documentation is valid and kept up to date and to inform the Director of Service in adequate time to procure any replacements., • Uniforms are provided by Huber Technology, Inc.; Field Service Specialists are required to be in uniform at all times during their normal work. It is extremely important that the Field Service Specialist maintain a clean, professional appearance at all times, • Provide technical support to other Field Service Specialists in the field, • Comply with all safety policies, practices and procedures, • Participate in proactive team efforts to achieve departmental and company goals, • Accepts other responsibilities as requested by the Service Manager or Director of Service III. EDUCATION AND EXPERIENCE: • An Associate’s Degree in a technical field or equivalent mechanical-industrial repair/service work experience, minimum 1-2 years in related field or an equivalent combination of education and experience. Wastewater experience a plus IV: ADDITIONAL SKILLS AND ABILITIES • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with serious work ethic, • Must work effectively with little or no supervision once trained/onboarded, • Take responsibility to physically be able to perform the job requirements, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver’s License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Must be able to drive a forklift or able to be trained, • Ability to travel – Road Warrior –via whatever method required (up to 100%) United States and Canada, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • Candidates must be located within close proximity to a major airport PHYSICAL DEMANDS The physical demands described here are representative of those that expected by an employee to be able to successfully perform the essential functions of this Field Service Specialist role: • Moderate to occasional heavy physical demand with exposure to dust in warehouse, hot and cold climates, inside and outside exposure when on the job, odors and noise may also be present., • Routinely moves, carries or lifts 25-50+ pounds such as required tools, laptops, PPE and suitcase, • Regularly required to stand, reach, bend, squat, push, pull and move about the facility or job-site, • Walk or stand at least 8+ hours per day, often ascends/descends ladders or steps on job-site or stairs/steps boarding or de-boarding airplanes., • Sit for flights or automobile or boat trips as required, • Able to use hands and able to follow safety guidelines, for both mechanical tools, manual tools, and computer entry., • Good hearing and vision are important to the Field Specialist’s safety on the job, • Consistent attendance due to advance planning & sometimes tight schedules and flight bookings required to meet the needs of our customers and job budgets – some weekend travel, late or early flights may be required due to weather, customer needs or delays at Airports, • Due to wastewater environment on site visits, must keep inoculations current as recommended for employee safety when on customer sites and at facilities Pre-Hire: This role requires ability to pass a pre-hire drug test, random safety/drug testing, pre-hire background check and completion of an I-9 form. HUBER is an E-Verify Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin

Job DescriptionDescription: SUMMARY The Petroleum Equipment Service Technician will install and service equipment such as Comdata, Veeder Root, Verifone registers, and Red Jacket and other related Petroleum equipment. This person will have knowledge of UST (underground storage tanks), AST (above ground storage tanks) also compliance testing. This person will provide excellent customer service, responding to customer demand calls and perform preventative maintenance on contracted and owned equipment. The Petroleum Equipment Service Technician will ensure equipment is fully operational and properly maintained and will be responsible for managing vehicle inventory and perform needed administrative tasks. Gas Express will offer Technicians a variety of internal and supplier training programs to ensure company Petroleum Equipment Service Technicians are up-to-date with the latest technology and knowledge needed for this position. Key Responsibilities for the Position: • Services, maintains, troubleshoots and repairs a variety of petroleum equipment and mechanical shop equipment including fuel dispensers, pumps, lines, hoses, valves, and leak detection monitoring equipment, automotive lifts, air and petroleum dispensing hose reels, pumps, lubricating equipment, air compressors, and related equipment; keeps daily record of work orders completed., • Reports equipment or process failures in order to protect Company assets., • Services, repairs, and maintains fuel storage and dispensing equipment and mechanical equipment used in maintenance and repair., • Demonstrates superior seamless customer service, integrity, and commitment to innovation, efficiency, and fiscally responsible activity., • Communicate with customers and explain technical issues to non-technical people., • Knowledge of procedures, practices, tools and materials used in the maintenance and repair of liquid fuel and hydraulic, electrical and mechanical shop support equipment., • Knowledge of petroleum leak detection and maintenance of systems and equipment., • Skill in care and use of shop tools and equipment., • Skill in servicing, repairing and rebuilding liquid fuel dispensers, pumps, piping, valves and vapor recovery systems., • Skill in diagnosis and field repair of petroleum product leak detection systems., • Possess experience and/or knowledge of inventory control and management., • Ability to understand and follow oral and written instructions in English language., • Ability to read and understand technical schematics and technical service bulletins., • Ability to work cooperatively with other team members., • Ability to lift arms above shoulder level to work on equipment., • Excellent mechanical abilities

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewarding career, we invite you to review our opportunities! Job Description Summary Porter / Yard Worker Are you seeking an entrepreneurial, empowering workplace that allows you to: • Work in a challenging, fast-paced environment where no day is the same • Advance into mechanic, driver or customer service roles • Work with an incredible team of people in a safety-focused culture Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Porter / Yard Worker. The Yard Associate is responsible for the stationing and retrieving equipment on the location's property. The role maintains a written maintenance schedule and may service equipment as necessary to ensure equipment meets all set specifications. The Yard Associate also inspects equipment prior to and after rental to document any lost and/or damaged equipment. Education or experience that prepares you for success: • High school diploma or GED preferred • Experience with common construction and industrial tools preferred • Some experience and/or training in repair of mechanical equipment preferred Knowledge/Skills/Abilities you may rely on • Ability to communicate effectively with customers (written and oral) • Ability to perform basic math skills (add, subtract, multiply and divide) • Working knowledge of the Microsoft Office Suite (Outlook, Excel, Word, etc) • General mechanical aptitude • safety-focus • Bilingual (Spanish or Other) may be required based on location needs The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer — Minority/Female/Disabled/Veteran and any other protected class. Related experience may include: Porter Hostler, Yard Hand, Yard Jockey, Yard Spotter, Entry Level Mechanic, Mechanic Trainee, Construction Laborer, Washbay Attendant, Equipment Washer, Forklift Driver, Warehouse Worker Base Pay Range: $17.75 - 23.26Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt’s policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Job DescriptionTitle: Fuel Storage Tank TechnicianLocation(s): Atlanta, GA or Charlotte, NC or Raleigh, NC or Pensacola, FL or Mobile, AL or Montgomery, AL (must be able to travel up to 1000 miles a week as needed)Compensation: $25-45hr (DOE)Requirements: • Ability to drive up to 1000 miles a week and conduct daily DVIR inspections, • Ability to adjust to field conditions and requirements, • Perform required monitoring certification, secondary containment, spill bucket testing, and vapor recovery resting and repairs per state requirements, • Submittal of daily work order and project associates paperwork, • Occasional out of town stay is required Experience with UST/AST monitoring and fuel system maintenance equipment is required. About: Service Technicians maintain and repair all refueling equipment for the petroleum industry, as well as commercial and municipal refueling facilities, marinas, and airports. The Technician will ensure that state and local regulatory directives regarding storage and monitoring systems are met. He or she will work closely with client personnel as a company representative, perform maintenance, and troubleshooting without direct supervision. The Service Technician will serve as the eyes and ears of our clients identifying and documenting all compliant and any observed non-compliant issues. This position will provide services in an efficient and timely manner and conduct business in a safe, ethical, and professional manner. Additionally, this position will act as Job Site Safety Officer and implement internal company safety policies at the job site. Must be able to follow instructions and complete assigned jobs timely and safely.Duties/Responsibilities • Experience with UST/AST monitoring and fuel system maintenance equipment is required., • Current or prior ICC UST Service Technician certification., • 24 or 40-hour HAZWOPER certificate or current 8-hour refresher courses., • Troubleshoot & work through problems independently., • Understand and conform to complex regulatory requirements., • Read and interpret machine diagnostic reports.

Job Description Why come work for Main Street Auto? • Industry leading pay, • No weekends, • Great employee benefits We are seeking a skilled and dedicated General Tire and Lube Technician to join our team. As a leading automotive service provider, we take pride in delivering exceptional customer service and maintaining the highest standards in vehicle maintenance. If you are passionate about automobiles, possess strong technical skills, and enjoy working in a fast-paced environment, this could be the perfect opportunity for you. • 8AM-5PM (M-F)Responsibilities:- Perform tire rotations, installations, and repairs with precision and efficiency- Conduct oil changes, filter replacements, and fluid checks to ensure optimal vehicle performance- Perform basic vehicle inspections and identify any potential issues or safety concerns- Conduct wheel alignments and balance tires to promote even tread wear and vehicle stability- Maintain accurate records of all services performed, including parts used and time spent on each task- Assist customers with tire recommendations, answering inquiries, and providing outstanding customer service- Adhere to company safety protocols and guidelines while working in a shop environmentRequirements:- needs to be emissions certified- High school diploma or equivalent- Previous experience as a tire and lube technician or similar role preferred- Proficient knowledge of tire installation, repair techniques, and oil change procedures- Strong mechanical aptitude and troubleshooting skills- Ability to operate shop equipment and tools safely- Excellent attention to detail and time management skills- Strong customer service and communication skills- Ability to work in a team and independently with minimal supervisionBenefits:- Competitive salary and opportunities for growth - Comprehensive benefits package including medical, dental, and vision coverage- Paid vacation - Ongoing training and development opportunities- Friendly and supportive work environmentIf you are ready to join a dynamic team that values quality workmanship and customer satisfaction, we encourage you to apply for the position of General Tire and Lube Technician. We look forward to hearing from you! Further questions about the job? Email us at:

Job Description Job Title: Handyman Company: Safe Nest Repairs LLC Location: Atlanta GA (On-site) About Us At Safe Nest Repairs LLC, we take pride in providing quality home improvement and repair services to families and property owners throughout Richmond County. Our mission is simple: make homes safer, more functional, and more comfortable. We're a growing company that values reliability, craftsmanship, and great customer service—and we're looking for a talented Handyman to join our team. Job Summary We are seeking a skilled and dependable Handyman to assist with residential repairs, maintenance tasks, and light remodeling work. This is a full-time, in-person position based in Atlanta GA servicing homes in Richmond County and nearby areas. If you have a strong work ethic, take pride in your craftsmanship, and enjoy working independently, we’d love to hear from you. Key Responsibilities * Perform general home repairs, maintenance, and light remodeling tasks * Common duties may include drywall patching, painting, plumbing, minor electrical work, carpentry, door and window repair, and flooring installation * Evaluate repair requests and provide on-site solutions or recommendations * Follow safety protocols and maintain a clean and organized work area * Communicate clearly with clients and team members * Track time and materials for each job * Occasionally assist with larger renovation projects Qualifications Required: * 2+ years of experience in general handyman, maintenance, or residential construction work * Strong knowledge of tools and materials used in home repairs * Ability to work independently and solve problems on the spot * Excellent customer service and communication skills * Valid driver’s license and reliable transportation * Must pass a background check Preferred: * Experience with plumbing, electrical, or HVAC work is a plus * Own set of basic hand and power tools * Bilingual (Spanish/English) is a bonus but not required Work Environment & Schedule * Full-time (Monday through Friday, 8:00 AM – 5:00 PM, with occasional Saturdays as needed) * On-site service around Atlanta GA and surrounding areas * Occasional travel within Atlanta, GA (mileage reimbursement provided) Compensation & Benefits * Competitive hourly pay based on experience ($18–$25/hr) * Opportunities for bonuses based on performance * Paid holidays after 90 days * Company-provided uniforms and gear * Career growth opportunities with a fast-growing local business How to Apply If you meet the qualifications and are ready to be part of a company that values craftsmanship, safety, and professionalism, we encourage you to apply today. 📍 Location: Atlanta GA 30309 – Applicants must be located in or willing to commute to this area. We kindly ask that only candidates who meet the listed requirements apply. Safe Nest Repairs LLC is an equal opportunity employer. Powered by JazzHR 3WBo2t6l9c

Job DescriptionPosition overview: We are seeking skilled and dependable Commercial Handyman Contractors to support ongoing maintenance and repair tasks across our commercial properties. This is a 1099 contractor position—ideal for self-employed professionals or small teams offering multi-trade services. You must be equipped, insured, and capable of working independently while delivering high-quality workmanship. Responsibilities: • Perform general repairs and maintenance in commercial settings, including electrical, plumbing, drywall, painting, carpentry, door hardware, and minor HVAC., • Complete assigned work orders on time and communicate job status with the office or property manager., • Inspect buildings and facilities to identify maintenance needs., • Maintain a clean, safe, and professional work environment., • Provide your own tools, transportation, and smartphone for job documentation and communication. Requirements • Minimum 2 years of experience in commercial handyman or general contracting work., • Active business license and liability insurance (minimum $1M preferred)., • Own reliable transportation and tools., • Strong time management and communication skills., • Ability to pass background check (if required)., • Willing to share contractor/vendor information for coordination and client transparency.

Job Description Position Community Service Technician Reports to Community Manager and Service Manager: POSITION SUMMARY: The Service Technician maintains the physical condition and appearance of the site; and performs other “day-to-day’ duties determined by the service manager that will take into consideration the Technician’s skills, experience, and career goals, and how they best fit into the operational needs of the property. Based upon property assignment, the Service Technician may be required to perform the duties of the Service Supervisor. JOB SPECIFIC COMPETENCIES: • Provides service to residents in a prompt, courteous, and professional manner and follows up on service requests to ensure the highest quality customer satisfaction, • Performs maintenance work for make-ready units as directed; service requests and repairs as directed; installs major appliances; all other tasks as assigned by the Service Manager, • Cleans inspects, and maintains the physical appearance of the community, all common areas, grounds, and building systems, and corrects or reports deficiencies to supervisors Education: • High School Graduate or General Education Degree (GED) for consideration, • HVAC/Freon Recovery Certification, • EPA Refrigerant Certification, • CPO (Certified Pool Operator), • Valid Driver’s License, • Minimum of three (3) years related experience, • Knowledge of a variety of skilled trades, including elements of construction/installation, uses, repair, and maintenance including minor carpentry, minor plumbing, mechanical and electrical, household appliances, • Completion of in-house training within the first 90 days of employment, • Will be exposed regularly to the outdoor environment; may also have moderate exposure to injuries; will be exposed to some level of noise when using power tools; hazards can be avoided with proper lifting techniques, MSDS, general safety training, and wearing safety equipment, • Will be regularly called upon to work overtime and on-call schedules, while on-call must be able to respond to calls within 15 minutes and be on premises of assigned apartment community within 30 minutes to complete resident/management requests, • Enjoys the work that they do demonstrates a pleasant demeanor on the job and shows a desire for success, • Exhibits behavior that is consistent with the Vision, Mission, and Core Values of the Company; makes working environment enjoyable for self and others The Community Service Technician may be required to assist with special projects or activities designated by the Company or in the absence of the Service Manager. This job description should not be considered all-inclusive. It is merely a guide of expected duties. The employee understands that the job description is neither complete nor permanent and it may be modified at any time. At the request of their supervisor, an employee may be asked to perform additional duties or take on additional responsibilities without notice. I acknowledge receipt of a copy of the Community Service Technician job description and comply with the guidelines set forth. Our Mission: Provide quality, safe, and affordable housing for low and moderate-income families Provide an environment for its team members to excel and be recognized and rewarded for their accomplishments Provide the Principals and Partners a fair return on their effort and investment Core Values: EXCELLENCE | INTEGRITY | RESPONSIBILITY | RESPONSIVENESS |RESPECT | CHARACTER

Job DescriptionCompany Description Express Oil Change & Tire Engineers is the pre-eminent automotive maintenance provider in the nation with over 350 locations across 21 states, leading our industry through excellence, innovation, and growth. Don’t let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services. Job Description The General Service Technician is responsible for providing quality service and premium vehicle repair in a timely manner. This position will adhere to and promote the Company mission while operating within the confines of the Company’s core values and contributing to the success of their functional team. Primary Responsibilities include (but are not limited to): • Change oil and oil filters in cars and light trucks, • Provide automobile tire care in the form of installation, repair and rotation, • Inspect and top off engine fluids, • Lubricate Frontend parts as needed, • Perform accurate and thorough vehicle inspections following a checklist of potential trouble spots such as: belts, hoses, brakes, etc., • Move and operate customer vehicles into and out of service bays, • Maintain positive customer relationships, • Maintain positive and productive working relationships with co-workers and management, • Keep tools, equipment and work areas clean and functional, • Maintain a safe, clean, and organized work area, • Act in a professional manner suitable as to represent our organization with which you are employed, always and in every instance projecting an attitude of trust, honesty, and respectQualifications We are looking for: • A High School Diploma, GED or equivalent, • One year or more years of experience in basic car care helpful but not necessary, • Customer-focused attitude with ability to work well in a team environment, • Must be mechanically inclined, • Valid driver’s license, • Ability to pass a pre-employment drug test and background screen, • Effective communication and interpersonal skills, • Top-notch customer service skills with a desire to build long term trust and relationships with our customers, • Willingness to work Saturdays Additional Information All of your information will be kept confidential according to EEO guidelines. Physical Requirements: • Prolonged periods of standing, stooping, and bending, • At time, exerting 50 - 100 lbs of force occasionally and/or 10 - 25 lbs of force frequently and/or greater than 10 lbs of force constantly to move objects

Job DescriptionDescription: Skytech, Inc. is currently seeking a qualified Aviation Technician to join our team in Chamblee, GA. This position is a vital part of a crew responsible for performing inspections, maintenance, troubleshooting, and installations on aircraft in accordance with company and regulatory standards. Job Summary The Aviation Technician will carry out assigned tasks safely and accurately, using appropriate parts and documentation procedures. The ideal candidate is detail-oriented, dependable, and able to work closely within a team performing ground runs, updating aircraft databases, completing IFR certifications, and maintaining the highest standard of safety and compliance. Essential Duties/Responsibilities • Member of a three-to-four-person crew. Perform inspections, maintenance, troubleshooting, and/or installations on aircraft as directed by Team Leader, • Responsible for completing assigned tasks in a safe and accurate manner, • Perform tasks using the appropriate parts, and in accordance with appropriate manufacturers instructions or as prescribed by team leader, • Maintain adherence to the operating parameters of the Skytech, Inc. Repair Station Manual, • Properly document work completed, parts removed, parts requested, or on-the-job training received, • Accountable for time expenditures on jobs in progress, with an accurate record of time worked shown daily on timecard, • Maintain working knowledge of current airworthiness directives, service bulletins, service letters, and the like, • Promote company policy, • Promote team concept within team and within company, • Provide own toolbox and professional quality tools as necessary to perform the work, • AMT must be able to properly complete paperwork associated with the assigned tasks including work orders, tags, timecards, parts requests, and training forms. Perform ground runs to check aircraft systems pre & post inspection, • Perform avionics duties including installations & systems troubleshooting, • Update all aircraft databases as required, • Perform IFR Certifications, • Valid Airframe and Powerplant (A&P) Certificate; Inspection Authorization (IA) preferred, • Minimum 2 years performing general maintenance duties on PC-12 and PC-24 or similar aircraft, • Ability to lift and carry objects weighing up to 40 lbs., • Must be able to climb ladders, stairs, and work in restricted spaces, • Ability to use hand tools and specialized test equipment, • Proficiency in general computer use and MS Office software, including Excel, Word, and Outlook, • Work overtime or off-site as needed. What We Offer • 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus, • 90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9,600 annually, • Monthly health savings account (HSA) contributions totaling $2,250 for single coverage and $3,000 for family coverage annually, • 401(k) retirement plan matching up to 6%, • Life and long-term disability insurance premiums paid in full About Skytech, Inc. Skytech, Inc. is a leading general aviation sales, service, and management company specializing in owner-flown and business aircraft. With locations in Westminster, MD, Rock Hill, SC, and Chamblee, GA, we serve the Mid-Atlantic and Southeast regions as an authorized Piper and Pilatus PC-12 service center and sales representative. We offer a team-driven environment focused on safety, integrity, and operational excellence.

Job Description Are you a hands-on mechanic who loves fixing things and leading a team? We’re looking for a Small Engine Mechanic to take charge of our fleet and keep everything from trucks to mowers running smoothly. What You’ll Do: • Keep our shop clean, safe, and efficient, • Maintain and repair vehicles and equipment (skid steers, trailers, mowers, and more), • Prioritize repairs and reduce equipment downtime, • Save money by spotting warranty opportunities and managing parts, • Communicate with branch managers about service needs, • Track repairs and maintenance accurately, • 2+ years of experience with heavy-duty/Isuzu repairs preferred, • 2+ years of auto repair and preventative maintenance required, • Strong mechanical and problem-solving skills, • Competitive pay, • Paid time off, • Health, dental, and vision insurance, • 401(k) with employer match ???? Questions? Call Brooke at 770-490-3065 or

Job DescriptionAbout the Role Are you a hands-on problem solver who enjoys working with tools and tackling mechanical challenges in the field? We’re looking for a reliable and self-motivated Field Service Technician (FST) to join our growing team. This role involves installing, maintaining, and repairing non-IT healthcare equipment at various client locations, ensuring safety, functionality, and customer satisfaction. This is a non-IT, field-based role—perfect for those with experience in construction, low-voltage installations, light mechanical repair, or similar trades. What You’ll DoEquipment Installation & Field Service * Install, troubleshoot, and repair non-networked healthcare equipment at medical and commercial facilities * Use hand and power tools to install on a variety of surfaces including drywall, tile, and masonry * Read and interpret installation diagrams, blueprints, and equipment manuals * Maintain clean and organized work areas at all job sites Customer & Team Communication * Serve as the primary onsite point of contact for client representatives * Communicate effectively with Field Managers, Team Leads, and clients throughout project execution * Identify and escalate project issues, inventory concerns, or site discrepancies in real time Reporting & Documentation * Complete daily documentation including timecards, expense reports, service notes, and checklists * Capture and upload high-quality photos showing completed work and any noted issues * Submit sign-off forms and reports using company systems Inventory Management * Verify delivery and condition of parts and materials at each site * Report missing, damaged, or incorrect inventory before starting installations * Return unused or damaged units to proper packaging as required What You BringRequired Qualifications * High School Diploma or GED * 1+ year experience in a field service, maintenance, or hands-on trade role * Proficient with standard hand and power tools (drills, levels, etc.) * Comfortable working independently in customer-facing environments * Strong communication skills—both verbal and written * Working knowledge of Microsoft Office (Word, Excel, Outlook) Preferred Experience * Background in construction, low-voltage systems, plumbing, or general maintenance * Familiarity with reading blueprints or installation guides * Prior experience working in healthcare or regulated environments Key Attributes for Success * You enjoy being on the move and working with your hands * You’re detail-oriented and take pride in doing the job right the first time * You’re calm under pressure and capable of solving problems independently * You communicate clearly and professionally with teammates and clients alike Additional Information * This is a non-IT role; it does not involve computer systems, software, or networking * Occasional overnight travel may be required depending on project location * All tools, training materials, and support are provided by the company Why Join Us? * Supportive and safety-focused work environment * Opportunities for career growth and specialized training * Be part of a company that values craftsmanship, accountability, and professionalism Apply Now If you're ready to take the next step in your career and work in a role where your skills truly make an impact, we’d love to hear from you. Let me know if you'd like a Word doc or PDF version, or if you want help customizing this for a job board or internal posting. Powered by JazzHR Un2hV7AHVR

Job Description We are seeking a skilled and experienced Generator Field Technician to join our team. As a Generator Technician, you will be responsible for the installation, maintenance, and repair of generators and their related systems. You will work on a variety of generator models and sizes, ensuring their optimal performance and reliability. Key Responsibilities: • Install and commission generators according to manufacturer guidelines and specifications, • Perform routine and preventative maintenance on generators, including oil and filter changes, fuel system inspections, and component testing, • Diagnose and troubleshoot electrical and mechanical issues, identifying faulty components and implementing necessary repairs, • Replace faulty parts and components, ensuring proper installation and adjustment, • Maintain accurate records of all maintenance and repair activities, including completed work order forms and parts used, • Comply with safety regulations and protocols, ensuring a safe work environment at all times Requirements • High school diploma or equivalent, • Previous experience as a generator technician, • Strong electrical and mechanical aptitude, • Ability to diagnose and troubleshoot generator issues, • Knowledge of generator safety protocols, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Lula is looking for a 1099 Appliance Repair Pro to help with property maintenance of several thousand rental properties across the Atlanta Metro area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days Experience in the following are a plus: *Residential Appliance Experience REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Job Type: Contract

Job Description Triad Service Center is seeking a qualified Field Equipment Installer for a variety of light industrial equipment based out of the Atlanta GA area. Installed equipment can vary and could include restaurant grease containment units, checkout lanes, bike/clothing racking, and other customer equipment found in large retail / industrial locations. This position will utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, tablet, cell phone, PAID TRAINING provided. DUTIES, TASKS AND RESPONSIBILITIES • Responsible for providing outstanding CUSTOMER SERVICE., • Unpacks, catalogs and confirms parts and pieces are accounted for, • Installs new equipment in location designated by customer., • Realigns and adjusts components such as spindles and clutches., • Installs and repairs electronic components of machinery of equipment., • Start machines and equipment to test operations following repair., • Drills through concrete and building walls, • Responsible for record keeping and reporting of work orders, parts, supplies ordering, and following a daily agenda., • Travel involving overnight lodging may be required, • Treats company equipment (i.e. vehicle, tools, phone, tablet, credit card, and parts) as if they were their own and follows maintenance guidelines on company provided vehicle., • Performs additional duties, tasks, responsibilities, as a supervisor may, from time to time, deem necessary. TECHNICAL REQUIREMENTS AND QUALIFICATIONS EDUCATION and/or EXPERIENCE • High school diploma or general education degree (GED); good mechanical aptitude/skills., • Self-starter with entrepreneurial spirit who operates business within the framework of each customer’s business structure., • Good driving record., • Ability to read, write, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Excellent time-management skills. LANGUAGE SKILLS • Possesses excellent communication skills; both verbal and written with ability to communicate effectively to customers. REASONING ABILITY • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. OTHER SKILLS & ABILITIES • Detail oriented, • Excellent listener, • Skilled in the use of hand and mechanical tools, • Owns or can purchase or borrow basic standard and metric mechanical tools, gear puller, and three-drawer tool chest, • Quality – Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; monitors own work to ensure quality, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Dependability - Excellent attendance. Responds to service request in a timely manner. Follows instructions, responds to management direction. Takes responsibility for own actions. Maintain a valid driver’s license and safe driving skills. Must always meet state and federal regulations. PHYSICAL DEMANDS • While performing the duties of this job, the associate is occasionally required to drive long hours., • The associate is regularly required to sit; use hands to finger, handle or feel; reach with hands and arms; stoop, kneel or crouch; talk or hear and taste or smell., • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT • Travel up to an average of 300 miles per day, • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals. MISCELLANEOUS • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays As this is a mobile position, our Field Equipment Installer can be based out of many cities around the Atlanta area. Find out more: Powered by JazzHR KbzidwVh4d

Job Description FIELD SERVICE TECHNICIAN Operates and maintains digital and analog electronics devices, repairs and troubleshoots assemblies to the module level. Documents maintenance efforts. The position typically works under close supervision and direction. FULL TIME (Hiring Immediately) Must be fully vaccinated or meet the requirement for a religious accommodation. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: • Prepares and maintains appropriate and required records., • Use general purpose test equipment, basic hand tools and special tooling as required., • May order replacement spares and parts from vendor parts list. MINIMUM JOB REQUIREMENTS: • Literate in computer usage., • Strong written and oral communication skills., • Ability to follow written and verbal directions, prioritize work, complete multiple tasks, work under deadlines, concentrate and apply craft skills., • Ability to read and interpret technical material., • Must be able to lift 50 lbs., • Ability to walk, stand and sit for extended periods, and to climb stairs., • Must Pass Background Check Starting Salary $21.50-$24.00 Must be available to work weekends

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Atlanta, GA area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $25-$30. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by Scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR lT6dB4dXkE

Job Description Position Community Service Technician Reports to Community Manager and Service Manager: POSITION SUMMARY: The Service Technician maintains the physical condition and appearance of the site; and performs other “day-to-day’ duties determined by the service manager that will take into consideration the Technician’s skills, experience, and career goals, and how they best fit into the operational needs of the property. Based upon property assignment, the Service Technician may be required to perform the duties of the Service Supervisor. JOB SPECIFIC COMPETENCIES: • Provides service to residents in a prompt, courteous, and professional manner and follows up on service requests to ensure the highest quality customer satisfaction, • Performs maintenance work for make-ready units as directed; service requests and repairs as directed; installs major appliances; all other tasks as assigned by the Service Manager, • Cleans inspects, and maintains the physical appearance of the community, all common areas, grounds, and building systems, and corrects or reports deficiencies to supervisors Education: • High School Graduate or General Education Degree (GED) for consideration, • HVAC/Freon Recovery Certification, • EPA Refrigerant Certification, • CPO (Certified Pool Operator), • Valid Driver’s License, • Minimum of three (3) years related experience, • Knowledge of a variety of skilled trades, including elements of construction/installation, uses, repair, and maintenance including minor carpentry, minor plumbing, mechanical and electrical, household appliances, • Completion of in-house training within the first 90 days of employment, • Will be exposed regularly to the outdoor environment; may also have moderate exposure to injuries; will be exposed to some level of noise when using power tools; hazards can be avoided with proper lifting techniques, MSDS, general safety training, and wearing safety equipment, • Will be regularly called upon to work overtime and on-call schedules, while on-call must be able to respond to calls within 15 minutes and be on premises of assigned apartment community within 30 minutes to complete resident/management requests, • Enjoys the work that they do demonstrates a pleasant demeanor on the job and shows a desire for success, • Exhibits behavior that is consistent with the Vision, Mission, and Core Values of the Company; makes working environment enjoyable for self and others The Community Service Technician may be required to assist with special projects or activities designated by the Company or in the absence of the Service Manager. This job description should not be considered all-inclusive. It is merely a guide of expected duties. The employee understands that the job description is neither complete nor permanent and it may be modified at any time. At the request of their supervisor, an employee may be asked to perform additional duties or take on additional responsibilities without notice. I acknowledge receipt of a copy of the Community Service Technician job description and comply with the guidelines set forth. Our Mission: Provide quality, safe, and affordable housing for low and moderate-income families Provide an environment for its team members to excel and be recognized and rewarded for their accomplishments Provide the Principals and Partners a fair return on their effort and investment Core Values: EXCELLENCE | INTEGRITY | RESPONSIBILITY | RESPONSIVENESS |RESPECT | CHARACTER

Job DescriptionWho We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are seeking a skilled and hardworking Petroleum Service Technician to join our Southeastern team in NORTH CAROLINA. The service technician's role entails diagnosing and repairing electronic and mechanical issues, software and hardware installations, and performing emergency and scheduled repairs and maintenance. This is an opportunity for a long-term position and to join a growing company. Must be willing to relocate to North Carolina. Must have industry experience. Responsibilities • Effectively diagnose and repair customer equipment., • Conducts work in a professional manner and provides stellar customer service., • Performs repairs and scheduled maintenance in a timely manner., • Follows safety rules and guidelines., • Maintains truck inventory and supplies., • Maintains truck clean, hazard free, and performs all scheduled maintenance on company vehicle., • Submits proper and neat paperwork outlining repairs completed and parts used., • Previous experience as a petroleum service technician., • High School diploma/GED., • Excellent verbal and written communication skills., • Mechanical and electrical equipment knowledge., • Dresser Wayne Dispensers, • Fuel Dispensers, • Verifone POS, • Veeder Root, • Fuel Master, • Red Jacket, • FE Petro, • The petroleum service technician position requires standing, bending, kneeling, and climbing., • Position requires the use of a ladder., • Position requires the ability to lift and manipulate up to 50 pounds., • Position requires travel., • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP), • World-class paid training program for you to learn the skills for long term career success

Job Description If you want to wake up and enjoy coming to work every day, let’s chat. We’re a fun, high-performing team looking for a skilled Garage Door Service Professional who enjoys working independently in the field and collaborating with the crew to deliver five-star service. Pay & Benefits: • Competitive base salary + commission (earn more when you help customers well), • Performance bonuses and growth opportunities, • Paid time off and holidays; benefits package available (health/retirement options), • Diagnose, repair, and maintain residential and light commercial garage doors, springs, cables, rollers, tracks, and openers, • Perform safety inspections and educate customers on repair options and preventative maintenance, • Provide clear, written estimates; secure approvals; and complete jobs efficiently and safely, • Recommend products/services that genuinely benefit the customer (no pressure tactics), • Maintain a clean, organized service vehicle and accurate job notes/photos in our CRM, • Support teammates, share knowledge, and jump in where needed, • 3+ years of professional garage door service experience (mandatory), • Strong troubleshooting skills across major door and opener brands, • Excellent customer communication and professionalism in the home, • Self-starter mentality, dependable, and safety-first mindset, • Ability to lift 75+ lbs, use ladders, and work on your feet throughout the day, • Valid driver’s license with an acceptable MVR; able to pass background/drug screenAbout Company Aaron Overhead Doors is an employee-first company with a bold mission: to be the best place to work in and around Atlanta. We believe culture isn’t just a buzzword — it’s our foundation, and we protect it fiercely. As a boutique garage door company, we specialize in high-end doors and screens for both residential and commercial clients. We value innovation, doing things the right way, and delivering wow experiences to our customers — and each other. We have three locations: Buford, Buckhead, and Milton. Our Core Values • Right Way: Do it right the first time, • Leadership: Set the tone, raise the bar, • Innovation: Always be improving, • Details Matter: Sweat the small stuff, • Belief in Our Brand: Be a fan and a steward, • Give Back: Serve others with purpose, • Have Fun: Laughter is part of the job, • Positive Culture: Lift the room, daily, • Believe in Our Heroes: Our customers are the stars, • Deliver Wow: Blow minds, not budgets

Job DescriptionRole Overview: We are seeking a specialized Ice Machine Repair Technician to handle service, maintenance, and emergency repair of commercial ice machines in restaurant environments. This contract-based role is perfect for self-sufficient professionals with experience in refrigeration and specific brands like Hoshizaki, Manitowoc, and Scotsman. Responsibilities: • Diagnose, repair, and maintain various commercial ice machines., • Perform descaling, sanitizing, and filter replacements according to health standards., • Replace mechanical and refrigeration components such as compressors, evaporators, pumps, and valves., • Troubleshoot electrical and refrigeration-related failures., • Advise clients on proper usage and preventative maintenance procedures., • Document services performed and update customer maintenance logs. Requirements • Minimum 2 years of hands-on experience working on commercial ice machines., • Familiarity with common issues across leading brands (e.g., Hoshizaki, Manitowoc, Scotsman)., • EPA refrigeration certification is a plus but not required., • Must be an independent contractor with valid general liability insurance and or license., • Must own a reliable work truck or van and carry all necessary diagnostic and repair tools., • Ability to work independently and handle service calls with minimal supervision., • Clear communication and time management skills., • OSHA certification, • Experience with tenant improvement projects

Job Description Position title: Casting Staff FLSA Status: [Non-Exempt] Employment Status: Full-Time Employee Location: 100 MKDA Way, Griffin, Georgia 30224 Supervisor: Casting supervisor Position summary: This position will be engaged in activities within the Casting Process of Mitsui Kinzoku Die-Casting Technology America, Inc. (the “Company” or “MKDA”). The (position title) will be responsible for maintain and manage the specified manufacturing conditions for the automation equipment of the casting process. This will include responsibilities related to melting melting the raw material and automatically pouring the molten metal into the mold attached to the casting machine. Minimum Background, Skills and Educational Requirements: • High school graduation (required), • 5 years or more experience in die casting process (required) or 5 years or more experience in automobile manufacturing parts. the automobile parts manufacturing industry (required), • Language skills: Be fluent in business-level English., • Good relationships and interpersonal skills. Key Competencies: • Great ability to communicate with anyone, either verbally or in writing., • A powerful ability to build and maintain friendly interpersonal relationships., • A strong ability to prioritize multiple key issues and think strategically from a short-term, medium-term, and long-term perspective., • Ability to multitask competently., • Analysis skills based on quality engineering, • Ability to understand and participate in activities to meet company and industry standards., • Comply with all safety precautions in accordance with OSHA guidelines, • Efficiently communicate with colleagues, supervisors and drunken management in production activities in a positive way to drive operations Job Responsibility: The work contents that the staff of the casting process is in charge of are as follows • Raw material management, • Maintenance of melting furnace, • Maintenance of mold condition, • Inspection and confirmation of casting equipment, • Inspection and confirmation of manufacturing conditions, • Production support based on production planning, • Product quality check, • Investigate the cause and take countermeasures when a quality abnormality occurs, • Quality check of manufactured products after mold repair, • Quality check of manufactured products after equipment repair, • Communication of quality and production information between production shifts, • Maintain a safe and clean environment, • Participation and compliance with activities to maintain requirements of company and industry standards., • Educate employees in the casting process Other Other responsibilities required by us and / or the supervisor from time to time. Scheduled working hours • Full-time job. Physical requirements: • It is necessary to communicate verbally and capture information in an effective manner in the working environment of the casting process., • You need to stand, sit, crouch, walk, bend, move, reach out, or reach out for extended periods of time., • We will implement and comply with all safety instructions without restrictions., • Pull, push, carry, lift, or move items up to 20 lbs., • Advanced visual, auditory, and olfactory awareness and observation required to closely monitor various work environments such as offices, production sites, and distribution areas. Work environment: • Occasionally exposed to moving mechanical parts and vehicles., • The noise level in the work environment is usually quiet to moderate. Work in the casting process may be exposed to high temperature environment Other obligations: This job description explains the mandatory duties performed by employees in this role. However, it is not designed or intended to be interpreted as a comprehensive inventory of all the obligations, responsibilities, and qualifications required of an employee assigned to a job. the Employer retains the right to change or assign other duties to this position. Employees are expected to fulfill each job responsibility described in this document and elsewhere.

Job DescriptionFull Job Description Position title: Casting Staff FLSA Status: [Non-Exempt] Employment Status: Full-Time Employee Location: 100 MKDA Way, Griffin, Georgia 30224 Supervisor: Casting supervisor Position summary: This position will be engaged in activities within the Casting Process of Mitsui Kinzoku Die-Casting Technology America, Inc. (the “Company” or “MKDA”). The (position title) will be responsible for maintain and manage the specified manufacturing conditions for the automation equipment of the casting process. This will include responsibilities related to melting melting the raw material and automatically pouring the molten metal into the mold attached to the casting machine. Minimum Background, Skills and Educational Requirements: • High school graduation (required), • 5 years or more experience in die casting process (required) or 5 years or more experience in automobile manufacturing parts. the automobile parts manufacturing industry (required), • Language skills: Be fluent in business-level English., • Good relationships and interpersonal skills. Key Competencies: • Great ability to communicate with anyone, either verbally or in writing., • A powerful ability to build and maintain friendly interpersonal relationships., • A strong ability to prioritize multiple key issues and think strategically from a short-term, medium-term, and long-term perspective., • Ability to multitask competently., • Analysis skills based on quality engineering, • Ability to understand and participate in activities to meet company and industry standards., • Comply with all safety precautions in accordance with OSHA guidelines, • Efficiently communicate with colleagues, supervisors and drunken management in production activities in a positive way to drive operations Job Responsibility: The work contents that the staff of the casting process is in charge of are as follows • Raw material management, • Maintenance of melting furnace, • Maintenance of mold condition, • Inspection and confirmation of casting equipment, • Inspection and confirmation of manufacturing conditions, • Production support based on production planning, • Product quality check, • Investigate the cause and take countermeasures when a quality abnormality occurs, • Quality check of manufactured products after mold repair, • Quality check of manufactured products after equipment repair, • Communication of quality and production information between production shifts, • Maintain a safe and clean environment, • Participation and compliance with activities to maintain requirements of company and industry standards., • Educate employees in the casting process Other Other responsibilities required by us and / or the supervisor from time to time. Scheduled working hours • It is necessary to communicate verbally and capture information in an effective manner in the working environment of the casting process., • You need to stand, sit, crouch, walk, bend, move, reach out, or reach out for extended periods of time., • We will implement and comply with all safety instructions without restrictions., • Pull, push, carry, lift, or move items up to 20 lbs., • Occasionally exposed to moving mechanical parts and vehicles. Other obligations: This job description explains the mandatory duties performed by employees in this role. However, it is not designed or intended to be interpreted as a comprehensive inventory of all the obligations, responsibilities, and qualifications required of an employee assigned to a job. the Employer retains the right to change or assign other duties to this position. Employees are expected to fulfill each job responsibility described in this document and elsewhere

Job Description Join Barfield and Become a Part of the Adventure! If you are a talented Mechanical Technician interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry : it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Technician to join our team and support our Mechanical department. Job Title: Mechanical Technician Department: Operations/Production FLSA Status: Full Time - Non-Exempt Duties and Responsibilities • Test, troubleshoot, repair, and calibrate units using schematics diagrams, Component Maintenance Manuals (CMM), and other documents such as Airworthiness Directives, Service Bulletins, and customer Engineering Orders., • Inspect and test Mechanical Aircraft Components to identify defects and wear and tear areas., • Disassemble, clean, and inspect Aircraft Component., • Repair or replace damaged or worn components., • Reassemble and test Mechanical units to ensure proper operation., • Performs a variety of complicated tasks., • Needs to be familiar with various Component Maintenance Manuals (CMM) practices and procedures., • High School diploma or equivalent., • Basic computer skills., • Successfully completed technical training by a certifying educational institution or 1-2 years of bench experience in the field or related area., • Reads, understands and, interprets directions of appropriate maintenance manuals to identify., • Must be able to evaluate, troubleshoot, repair, and calibrate units using official documents., • Must have knowledge and experience with mechanical tools, multimeters, micrometers, calipers, measuring indicators, and gauges., • Must be able to work with little or no supervision., • Ability to work with standardized tools and electric equipment., • Technical college, or Military training in their expertise., • Knowledgeable, friendly, positive attitude, be a “Team Player”, always willing to learn new tasks, new skills and participate with peers., • CUSTOMER FOCUS We strive to provide the best services to our customers., • INTEGRITY We are personally accountable for the highest standards of ethical behavior., • TEAMWORK We are committed to a teamwork environment. As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Job Description Company: Superior Contracting & Maintenance Location: Local Technician (Serving ATLANTA, GA) 1099 Contractor - Remodeling and Projects Technician Are you an experienced remodeling technician looking for the flexibility to control your schedule and income? Do you take pride in delivering quality craftsmanship and exceptional customer service? If so, we want you on our projects team! Superior Contracting & Maintenance is a well-established home repair and maintenance company with over 13 years of experience serving a diverse range of clients, proudly based just north of our flagship market in Atlanta, GA service AL, AZ, GA, FL, NC, OK, SC, TN, & TX. We specialize in various services, including plumbing, HVAC, electrical, carpentry, and remodeling projects. Our mission is to provide reliable, high-quality service while fostering strong communication and relationships with our clients. Requirements • Strong communication skills, professionalism, and a reliable, punctual attitude., • Must own a truck, van, or SUV capable of transporting tools and materials., • Own tools necessary for performing remodeling work independently., • Preferred: At least 5+ years of experience in remodeling and related trades., • Ability to lift heavy tools and equipment as needed., • Valid driver’s license and dependable transportation., • Must be able to navigate an online portal efficiently., • Execute residential remodeling projects, including Turns/Make Readys, kitchens, bathrooms, and living spaces, with precision and attention to detail., • Collaborate with Project Managers to understand their vision and provide effective solutions., • Ensure compliance with local building codes and safety regulations., • Communicate clearly with the Superior team to ensure customer satisfaction and timely project completion., • General liability insurance is required; workers' comp is preferred; COI is required., • I9/W9 must be provided with a valid tax ID., • Completion of onboarding video training with a live vendor representative is required before work orders can be issued. Benefits • Fast Pay: We process direct deposits after receiving proof of completion and quality, without any job board or service fees. If you are dedicated to delivering top-notch service and are ready to join a growing team, we want to hear from you! To Apply: Text AJ at 470-243-4016 with your name, a brief background, and the areas you service. Please text between 8 am - 6 pm (no calls, please). We’re looking to hire a select number of qualified remodeling technicians to join our projects team, so don’t wait—apply today! For more information, visit our website: If you are dedicated to delivering top-notch remodeling services and want to join a growing team, we want to hear from you!

Job Description G&W Equipment, Inc., is an authorized dealer and service provider for CAT® Lift Trucks, Mitsubishi Forklifts, and Jungheinrich Forklifts. We are a family owned and operated provider of the sales and service of Materials Handling and Aerial Equipment to a variety of industries throughout North Carolina, South Carolina, and Georgia. To learn more, visit our website at . As a Field Service Technician operating out of our Atlanta, GA branch you will be responsible for traveling to customer facilities and performing preventative maintenance, troubleshooting, and repairing forklifts, aerial lifts, and other powered material handling equipment. Responsibilities include but are not limited to: • Safely and independently troubleshoot, diagnose and repair mechanical, hydraulic and electrical systems, • Maintain and repair internal combustion and electric powered equipment, • Provide communication and a positive experience to customers while onsite Qualifications: • Strong mechanical and electrical troubleshooting skills, • Knowledge and understanding of Hydraulic Systems, • Previous experience evaluating and repairing forklifts, heavy equipment, tractors, automobiles or similar pieces of equipment, • Exceptional customer service skills, • Must be computer literate, able to use tablet and a laptop for field diagnostics and internet resources, • Must have a valid driver’s license with a clean driving record, be able to pass preemployment drug screens, background checks, and physicals. What We Bring to the Table: G&W Equipment, Inc. offers stability, career advancement, a positive work environment, and employee referral incentives. • Competitive compensation and PTO, • Extensive hands-on training and advancement opportunities, • Flexible Hours with the opportunity for overtime, • Company vehicle and uniforms, • Cell phone, tablets and laptops, • 401(k) plan includes a 100% company match up to the first 6% of savings, • Medical (HSA and PPO options), Dental and Vision insurance, • Short and Long-term Disability - No cost to you!, • Life Insurance - company paid with option to purchase more Powered by JazzHR hCDGIF8k7g

Job Description Field Service Technician Schedule: Monday - Friday, 7:30 am - 4:30 pm Office Location: Lithonia, GA Position Territory: Southeast Georgia About Us Since 1945, Pattons has supplied the most efficient, reliable, and technologically advanced compressed air systems to industries throughout the Southeast. We joined the ELGi Equipments Ltd. family of companies in 2012 with ambitions for dramatic growth. By investing in talent and technology, we are poised for significant expansion and deeper penetration into the markets we serve throughout North America and around the globe. Pattons offers all full-time employees: • Comprehensive benefits plan including medical, dental, vision, life insurance, and accident insurance, • 401(k) retirement plan with company match, • Paid Time Off, • Company Service Vehicle, • Company Uniform and PPE, • Company iPhone and iPad, • Tool Allowance Field Service Technicians deliver high quality service to Patton's, Inc. customers with a focus on safety, quality, integrity, and collaboration. Field Service Technicians are responsible for ensuring customer satisfaction through installing, repairing, and performing routine maintenance on compressed air equipment. As Field Service Technician, you will: • Diagnose, troubleshoot, repair, and test compressed air equipment on-site at customer facilities, • Inspect and perform preventative maintenance on compressed air equipment on-site at customer facilities, • Consult with and advise customers on compressed air equipment needs, maintenance, and repairs, • Document work performed using designated forms and submit reports to appropriate business units in a timely manner, • Coordinate with cross-functional teams including, but not limited to, Parts and Sales Departments to facilitate service to customers The Field Service Technician opportunity may be a match for you if you have the following qualifications: • High School Diploma or equivalent, • Driver's License with clean Motor Vehicle Record, • 2+ years' industrial equipment maintenance experience, • Ability to prioritize tasks with strong time management skills, • Effective written and oral communication skills, • Strong interpersonal/customer service skills, • Ability to take initiative and work independently, • 1+ years' compressed air system maintenance and troubleshooting experience, • 1+ years' refrigeration equipment maintenance experience, • EPA Section 608 Technician (Universal Refrigerant) Certification, • ASSE 6040 (Medical Gas Maintenance Personnel) Certification

Job Description Service Technician - The Preserve On Conley Forest Park, GA 30165 The company offers numerous options to help its employees achieve their financial, professional, and wellness goals including medical, dental, and vision insurance options, Paid time off, Company-provided life insurance policy, performance-based incentive programs, career development and opportunities for advancement. Key Responsibilities: • Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed., • Scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs., • Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked., • Knowledge of appliance repair, plumbing, electrical, safety conscious, and light carpentry Highly Desired Qualification: Universal EPA certifications, • To be considered for this role candidates must have a valid Driver’s License., • 1+ years of experience in Multifamily. Must be enthusiastic, creative, and able to think both strategically and tactically., • Demonstrated proficiency in Office Suite tools. Property Management Software, experience with Rent Manager is a huge plus!

Job Description Position Community Service Technician Reports to Community Manager and Service Manager: POSITION SUMMARY: The Service Technician maintains the physical condition and appearance of the site; and performs other “day-to-day’ duties determined by the service manager that will take into consideration the Technician’s skills, experience, and career goals, and how they best fit into the operational needs of the property. Based upon property assignment, the Service Technician may be required to perform the duties of the Service Supervisor. JOB SPECIFIC COMPETENCIES: • Provides service to residents in a prompt, courteous, and professional manner and follows up on service requests to ensure the highest quality customer satisfaction, • Performs maintenance work for make-ready units as directed; service requests and repairs as directed; installs major appliances; all other tasks as assigned by the Service Manager, • Cleans inspects, and maintains the physical appearance of the community, all common areas, grounds, and building systems, and corrects or reports deficiencies to supervisors Education: • High School Graduate or General Education Degree (GED) for consideration, • HVAC/Freon Recovery Certification, • EPA Refrigerant Certification, • CPO (Certified Pool Operator), • Valid Driver’s License, • Minimum of three (3) years related experience, • Knowledge of a variety of skilled trades, including elements of construction/installation, uses, repair, and maintenance including minor carpentry, minor plumbing, mechanical and electrical, household appliances, • Completion of in-house training within the first 90 days of employment, • Will be exposed regularly to the outdoor environment; may also have moderate exposure to injuries; will be exposed to some level of noise when using power tools; hazards can be avoided with proper lifting techniques, MSDS, general safety training, and wearing safety equipment, • Will be regularly called upon to work overtime and on-call schedules, while on-call must be able to respond to calls within 15 minutes and be on premises of assigned apartment community within 30 minutes to complete resident/management requests, • Enjoys the work that they do demonstrates a pleasant demeanor on the job and shows a desire for success, • Exhibits behavior that is consistent with the Vision, Mission, and Core Values of the Company; makes working environment enjoyable for self and others The Community Service Technician may be required to assist with special projects or activities designated by the Company or in the absence of the Service Manager. This job description should not be considered all-inclusive. It is merely a guide of expected duties. The employee understands that the job description is neither complete nor permanent and it may be modified at any time. At the request of their supervisor, an employee may be asked to perform additional duties or take on additional responsibilities without notice. I acknowledge receipt of a copy of the Community Service Technician job description and comply with the guidelines set forth. Our Mission: Provide quality, safe, and affordable housing for low and moderate-income families Provide an environment for its team members to excel and be recognized and rewarded for their accomplishments Provide the Principals and Partners a fair return on their effort and investment Core Values: EXCELLENCE | INTEGRITY | RESPONSIBILITY | RESPONSIVENESS |RESPECT | CHARACTER

Job DescriptionJOB DESCRIPTION Job Title: CDL Bus Driver Supervisor: Community Manager or Assistant ManagerFLSA Status: Hourly, non-exemptDate Approved: September 2021OVERALL JOB PURPOSE To provide excellent customer service and safe transportation services to the residents of the Community in a timely and orderly fashion. MINIMUM JOB QUALIFICATIONS AND REQUIREMENTS • Ability to drive the Community bus or other vehicles, meeting all federal, state, and provincial driving regulations and requirements, • Prospective drivers must have a valid license, have a good driving record, and hold commercial driver’s licenses (CDL) with passenger endorsement, if applicable, • Must be 21 years of age to drive a commercial (Class A or B) vehicle, • Ability to operate the Community bus or other vehicles in a safe manner at all times, ensuring the safety of all passengers, • Ability to meet the needs of the residents, transporting them to destinations on time and in an orderly fashion and accounts for all residents when leaving and returning to the facility, • Ability to work a flexible shift and schedule, including weekends, • Ability to care for the Community bus or other vehicles, ensuring routine preventative maintenance and cleaning is being done (checking tires, rotation of tires, oil changes, brakes are in good order). Reports mechanical issues, maintenance, and repair needs to supervisor, • May be responsible for ensuring all vehicle license plates, inspection tags, insurance cards, and accident kit are current and displayed properly, • Must submit a completed commercial driver packet supplied by Sunshine Retirement Living and receive written authorization with approval from Sunshine Retirement Living, • Demonstrated ability to communicate effectively in English, both verbally and in writing, with residents and staff, • Meets state health related requirements (as applicable for position), • Must have a current medical card. (If expiring within 3 months of hire, will be required to receive updated medical card prior to hire), • Ability to work in a team setting and be a team player, • Maintain a positive, respectful, and professional approach with coworkers and residents, • Ability to keep all business and operations information confidential, • Possess excellent customer service and organizational skills, • Ability to work under time constraints and meet department deadlines, • Ability to follow and adhere to policies, procedures, and standards, • Satisfactorily pass Sunshine’s and state regulated criminal record clearance, health screening and TB clearance (if applicable) ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Meet all federal, state, and provincial driving regulations, • Read and abide to the Vehicle Safety Policy, • Operate the Community bus or other vehicles in a safe manner at all times, • Drive the Community bus or other vehicles to and from required destinations staying within 100 air mile radius and within state lines, • Assist residents with walkers and groceries on and off the bus as needed and appropriately secure walkers when in motion, • Must know how to operate the mechanical lift on the bus both hydraulically and manually (if applicable), • Interact with residents regarding their transportation needs in a caring and considerate manner, • Schedule destinations of Community bus or other vehicles as directed by the Community Management Team, • Be accessible to the Community Management Team during working hours. This may include electronic equipment (Community cell phone with hands-free device, Community pager) or other means to stay in touch if there are changes in the schedule or unforeseen circumstances, • Responsible for timely submission of paperwork related to the performance of job duties as required by operational procedures or as requested, • Complete daily vehicle inspection and daily hours of service log reports following all DOT & State regulations, • May be assigned to any other job function in the Community on a relief basis, • Perform other duties as assigned by SupervisorOTHER JOB DUTIES AND RESPONSIBILITIES, • Perform all work assigned for the agreed-upon salary, accepting no additional payment or non-perishable gifts from residents, vendors, Community Management, or others, • Meet the assigned work requirements of the job. Regular attendance is required, • Serve as a role model for all employees by displaying a responsible, cooperative, and positive attitude, • Represent the Community in a professional, courteous, and friendly manner, • Adhere to dress/appearance code. Changes in attire may be dictated by special occasion or weather conditions. If you have questions, check with your supervisor, • Adhere to company policies, processes, and procedures, • Promote resident advocacy and demonstrate excellent customer service at all times, • Follow specified procedures as outlined in the Safety Manual regarding the handling of contaminated material encountered in accidents or injuries on the Community premises, • Attend education and training classes as necessary to fulfill state or provincial regulations applicable to the position, • Maintain personnel, resident, and business proprietary and/or confidential matters/material in strict confidence with management of the company (and/or other company staff as needed), • This position is considered a universal employee worker and will be crossed trained in other positions as directed by the supervisor, • This position has no supervisory responsibilities, • Maintains certifications as necessary such as First Aid, to fulfill state regulations (if applicable) PHYSICAL REQUIREMENTS Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Stand X Walk X Sit X Pushing, pulling and/or reaching X Grasping and fine manipulation X Climb or balance X Stoop, kneel, crouch, or crawl X Talk or hear X Taste or smell X Lifts Weight or Exerts Force 20% or less 20% to 40% 40% to 60% 60% to 80% 80% to 100% Up to 10 pounds X Up to 25 pounds X Up to 50 pounds X Up to 100 pounds X More than 100 pounds X The Community reserves the right to revise the duties set forth in this job description at its discretion.

Job Description Atlantic Pacific Companies is a dynamic industry leader, with a growing and diverse portfolio of properties throughout Florida, Georgia, Texas, California, North Carolina, and Washington, D.C. We are looking for passionate people who enjoy challenges and helping others. Does this sound like you? Join us! Our Company is seeking: An experienced and highly motivated Apartment Maintenance Supervisor for our Market Rate Apartment Community of 312 units in Sandy, Springs. Schedule: Monday - Friday 8:00am-5:00pm Job Type: Full-Time Job Description Summary: The Maintenance Supervisor leads, and coordinates activities of workers engaged in cleaning, maintaining, and repairing physical structures of buildings and grounds. Primary responsibilities include hands-on community maintenance, including overall inspection, repair and general maintenance of common areas and other interior/exterior areas. Responsibilities: • Lead the maintenance team to complete work orders, perform preventive maintenance, property upkeep and repairs., • Coordinate and complete resident work orders within 24 hours., • Complete regular community inspections., • Ensure that all market-ready apartments are prepared for move-in., • Perform on-call emergency service as required., • Monitor the maintenance and upkeep of all mechanical equipment in the community, including water heaters, HVAC units,, • Performs various preventative maintenance functions and records findings in maintenance logs and/or property management software system., • Works with Property Manager maintaining and monitoring Budget Control Log., • Confirms with Property Manager that contractors have completed insurance requirements before performing work., • Understands and complies with Fair Housing Laws and Standards., • Responsible for monitoring shop inventory to ensure productivity., • High School diploma, or GED equivalency, and minimum of 2-4 years direct experience as a Maintenance Supervisor or Lead Maintenance Technician for an apartment community., • EPA I or II, Universal or HVAC certified is required., • CPO Certification is a plus, and experience maintaining pools is required., • Thorough understanding of electrical, plumbing, and HVAC systems., • Previous experience with preventative maintenance, vendor relations, and organizing work orders Follow Us: Facebook LinkedIn Twitter Atlantic Pacific Companies is a drug-free workplace. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Disclaimer: The tasks and responsibilities listed are not the only ones applicable to the positions

Job DescriptionAuto Systems Centers is an Employee owned company (ESOP) and is also the worlds largest Midas Franchisee in the Midas chain. Every Team member receives company stock (after first full fiscal year) every year; HUGE!!! Our company culture is all about taking care of our Teams (people) so they can take care of our customers (Take care of People and People will take care of you) Our Goal is to make every Team member feel "Valued" and carry out their "Purpose" each and every day. Our Management style is "Servant Leadership", Serving our Teams and Leadership Development so we can better Serve our Customers. We Model/Live this in everything we do. Midas has a rich history and an iconic name in automotive maintenance, repair and tire industry as a company that is both progressive and cutting edge. We are about "TEAM": Our Team member benefits include: • 5-day work week; Family Friendly hours for our Team, • No Sundays and everyone is on a 5 Day work week., • Paid Holidays, • Paid Time Off after 6 Months, • Health, Dental, Vision, Prescription & Life Insurance, • 401K with Matching Funds (Dollar to Dollar match), • Advancement Opportunities, • Employee tool purchase program, • Great Weekly Pay, • We cover uniform expenses.We are looking for people that have a Great Attitude, Great Attendance and want to be a part of a winning Team!

Job Description Job Title :: ENGD1- Engineer 1 (Distribution) Location :: Forest Park-GA Contract :: 12+ Months Skills and Responsibilities · A Distribution Engineer is responsible for designing, planning, and managing the electrical distribution systems that deliver electricity to homes, businesses, and industries. They play a crucial role in ensuring the safe, reliable, and efficient distribution of electrical power. Key Responsibilities: Distribution System Design: Design, plan, and optimize electrical distribution systems including overhead and underground lines, substations, transformers, and other components . Ensure compliance with industry standards and regulations. Network Analysis: Perform load flow analysis, fault analysis, and voltage drop calculations to assess the capacity and performance of the distribution network. Identify and mitigate potential issues. · Asset Management: Maintain accurate records of distribution equipment, perform condition assessments, and recommend maintenance, repair, or replacement of aging or damaged assets. Equipment Selection: Specify and select distribution equipment, such as transformers, circuit breakers, switches, and protective devices, considering factors like voltage levels and load requirements. Safety and Compliance: Ensure that distribution · system designs meet safety standards, environmental regulations, and industry codes. · Collaborate with regulatory authorities for approvals and compliance. Reliability Improvement: Identify opportunities to enhance the reliability of the distribution system, reduce downtime, and improve power quality. · Implement strategies for system resilience. New Connections: Evaluate requests for new electrical connections, assess their impact on the distribution network, and design the · necessary infrastructure to support new customers. Project Management: Manage distribution infrastructure projects from conception to completion. Coordinate with · construction crews, contractors, and vendors to ensure project timelines and budgets are met. Emergencies and Outages: Respond to emergency situations, such as power outages or equipment failures, by conducting rapid assessments and developing solutions to restore power. Data Analysis: Analyze data from monitoring systems, smart grids, and sensors to gain insights into distribution system performance and make data-driven decisions. ualifications: Education: A bachelor's degree in electrical engineering or a related field is typically required. A master's degree may be preferred for more specialized roles. · Professional Licensure: Many Distribution Engineers are required to hold a professional engineering license (PE) or similar · Certifications, which vary by region. Technical Skills: Proficiency in distribution system design software, computer-aided design (CAD) tools, and power system simulation software. · Familiarity with AutoCAD and GIS (Geographic Information Systems) may be beneficial. · Knowledge: In-depth knowledge of electrical distribution principles, grid operation, protection systems, and equipment. · Understanding of regulatory requirements and industry standards. Analytical Skills: Strong analytical and problem-solving skills for assessing network performance, diagnosing issues, and proposing solutions. Safety Awareness: A strong commitment to safety protocols and procedures in designing and maintaining electrical distribution systems. · Project Management: Project management

Job DescriptionRole Overview We are hiring skilled independent contractors to handle service, diagnostics, and repair for food preparation equipment in commercial kitchens. This includes slicers, mixers, processors, and similar equipment critical to kitchen prep operations. Responsibilities • Troubleshoot and repair food prep equipment (e.g., mixers, blenders, processors, slicers)., • Conduct preventative maintenance and tune-ups to minimize failures., • Identify mechanical or electrical issues and replace or repair faulty components., • Perform safety checks to ensure compliance with manufacturer guidelines., • Keep accurate logs of work performed, time on site, and parts used., • Coordinate scheduling directly with clients (we provide client contact information)., • Maintain a professional demeanor and deliver quality service with minimal disruption to operations. Requirements • Minimum 2 years of experience repairing and maintaining food preparation equipment in commercial kitchens., • Strong mechanical and electrical troubleshooting skills., • Valid business license and/or general liability insurance., • Own a reliable work vehicle (truck or van) and carry all necessary diagnostic and repair tools., • Familiarity with common issues across leading brands, including: (Hobart, Robot Coupe, Globe, Vollrath, etc.), • Ability to work independently and maintain a high standard of professionalism., • Clear communication and time management skills., • OSHA certification, • Experience with tenant improvement projects

Job Description Job Title: Plumber Location: East Point, GA 30344 Company: Safe Nest Repairs LLC Employment Type: Full-Time / Part-Time (specify as needed) About Safe Nest Repairs LLC: Safe Nest Repairs LLC is a trusted provider of residential and commercial repair and maintenance services in the East Point, GA area. We are committed to delivering high-quality workmanship and excellent customer service. Join our team and help make homes and businesses safer, more comfortable, and well-maintained. Position Summary: We are seeking a skilled and reliable Plumber to join our growing team. The ideal candidate will have hands-on experience in plumbing installation, maintenance, and repair for both residential and commercial properties. This role requires someone who is self-motivated, dependable, and customer-focused, with a strong understanding of plumbing systems and codes. Responsibilities: * Perform a wide range of plumbing repair and maintenance tasks, including pipe fitting, fixture installation, leak repair, and water heater servicing * Diagnose plumbing issues accurately and recommend effective solutions * Complete work orders efficiently and to a high standard * Communicate clearly with clients and team members * Maintain plumbing tools, equipment, and a clean work environment * Follow all safety procedures and local plumbing codes and regulations Qualifications: * Proven experience as a plumber or in a similar role * Strong knowledge of plumbing systems, fixtures, and piping materials * Ability to install, repair, and maintain plumbing equipment * Proficiency with plumbing tools and equipment * Excellent problem-solving skills and attention to detail * Valid driver’s license and reliable transportation * Strong work ethic and ability to work independently or as part of a team * High school diploma or equivalent; plumbing certifications or trade school training preferred Benefits: * Competitive pay based on experience * Flexible schedule * Opportunities for advancement * Supportive team environment Powered by JazzHR zWHtYqG4Bu

Job DescriptionRole Overview We are looking for experienced independent contractors to provide repair and maintenance services for hot-side kitchen equipment in commercial kitchens throughout Georgia. This includes fryers, ovens, grills, steamers, and more. You'll play a key role in helping restaurants stay operational and safe by delivering prompt, professional repair services. Responsibilities • Diagnose, troubleshoot, and repair a wide range of hot-side kitchen equipment (gas and electric)., • Perform scheduled preventative maintenance to minimize downtime., • Replace worn or faulty parts such as heating elements, thermostats, valves, burners, etc., • Test and calibrate appliances to ensure proper functionality and safety compliance., • Accurately document service activities, repair actions, and parts used., • Maintain a clean, safe, and organized work environment., • Advise clients on proper usage and preventative maintenance procedures., • Document services performed and update customer maintenance logs. Requirements • Minimum 2 years of experience servicing hot-side kitchen equipment in restaurants or commercial kitchens., • Strong diagnostic and problem-solving skills, especially for gas and electric cooking appliances., • Must own a reliable work truck or van, fully stocked with tools and parts necessary for hot-side repairs., • Valid business license and/or liability insurance., • Comfortable working independently and communicating with clients on-site., • Knowledge of kitchen safety standards, electrical/gas safety, and manufacturer specifications., • Ability to work flexible hours and respond to emergency service calls when needed., • OSHA certification, • Experience with tenant improvement projects

Job Description A national multi-family management company seeks a highly motivated Service Supervisor to join our team. Ideal candidates must be people oriented with technical aptitude, strong organizational and make-ready skills. Candidate must be capable of working with little or no supervision. If you are interested in an environment that offers new opportunities/experiences every day please read further. The company offers a comprehensive benefits package that includes medical, dental, vision, life, flexible spending accounts, 401(k), bonus potential, vacation and sick time, and continued education and training, as well as many other benefits. Position Summary: Supervises and coordinates activities of workers engaged in preserving and maintaining physical facilities and grounds within the community so they are safe and aesthetically appealing to current and prospective residents. Job Responsibilities: Assists in all aspects of the community's maintenance, including: grounds, interior painting, custodial, preventive, corrective, deferred, and emergency maintenance. Supervises and establishes daily work schedule for maintenance staff. Provides service to residents, and repair work on vacant apartments in a prompt and professional manner. Approves expenditures within the guidelines of the approved budget. Performs other duties as assigned or which are inherent to the position. Assists the Community Manager in performing his or her duties. Experience/Skills: EPA Certification - Universal Level required. Must be people oriented with technical aptitude and strong organizational and make-ready skills. Must have experience in overseeing interior and exterior renovation projects. Must have experience working on heat pump systems. Must be able to use all types of hand and power tools, Freon recovery machinery, air conditioning gauges, and vacuum pumps. Must be available for after hour's emergency calls, including weekends and holidays if needed. Experience in Onesite and Ops is preferred. Interested applicants please email your resume EOE/Drug free Workplace Must submit to a background check and drug testing. • Principals only. Recruiters, please don't contact this job poster., • do NOT contact us with unsolicited services or offers

Job Description Sell with Confidence – Earn Without Limits – Thrive in a Culture That’s Actually Fun A Bit About Us: We’re a leading commercial roofing contractor serving the Greater Atlanta area, trusted by property owners, developers, and general contractors for our quality, responsiveness, and integrity. From roof replacements and retrofits to service and maintenance programs, we deliver high-performance roofing systems tailored to the Southeast climate. But what really sets us apart? Our unmatched company culture. With a young, energized leadership team and a modern approach to construction, we’ve created a place where top performers are supported, challenged, and celebrated. From fishing trips and golf simulators to cold brew on tap and CrossFit workouts on site—you’ll look forward to coming to the office. Now, we’re hiring an experienced Sales Representative to help drive business development and client relationships throughout the Atlanta market. Why Join Us? Uncapped Commission + Base Compensation Full-Time, W2 Role with Company Stability Company-Paid Medical, Dental & Vision Benefits Vehicle Allowance or Company Vehicle Laptop & Phone Provided Control Your Schedule – Build a Book of Business with Full Support Sell for a Company That Delivers on What You Promise Company Culture That Sets Us Apart: We believe that work should be challenging, rewarding, and enjoyable. Our young, energetic leadership team brings a modern approach to construction—and we invest heavily in our people and workplace culture. On-Site CrossFit Gym – Train before or after work, or between meetings Golf Simulator – Sharpen your swing or host casual meetings in style Cold Brew on Tap – Because great ideas deserve great coffee Team Events & Trips – Fishing charters, dinners, happy hours, and offsite team-building events Comfortable, Modern Office – A great space to collaborate, host clients, or recharge between site visits We take pride in building a team-first environment where top performers thrive—and we actually have fun doing it. Job Overview: We’re looking for a Sales Representative with experience in commercial roofing—someone who knows the industry, understands building owners and facility managers, and can hit the ground running. You’ll focus on identifying new opportunities, managing existing accounts, and helping clients find the right roofing solutions for their needs. Responsibilities: * Prospect and develop new commercial roofing opportunities (re-roof, service, repair) * Conduct site visits, roof inspections, and client presentations * Work with internal estimators and operations teams to prepare proposals and close deals * Manage and grow relationships with owners, property managers, and GCs * Track sales activity in CRM and report on pipeline and performance * Represent the company at industry events, tradeshows, and networking functions * Collaborate with leadership to meet sales goals and refine strategy in the Atlanta market Ideal Background: * 3+ years of sales experience in commercial roofing * Strong network within the property management or commercial construction space * Proven ability to generate leads, close deals, and build lasting client relationships * Working knowledge of commercial roofing systems (TPO, EPDM, metal, etc.) * Self-motivated, professional, and able to work independently * Based in or around the Greater Atlanta area