Trabajos maintenance and repair en Syracuse, NYCrear alertas

Job Description Pharmaceutical Production Operations Specialist include: • Operate technically sophisticated equipment through HMIs., • Performs machine set-up, operation, and troubleshooting on various pieces of packaging equipment., • Diagnose and repair issues with mechanical and electrical operations of equipment., • Set-up, monitor, adjust, and program packaging equipment within approved procedural and GMP guidelines., • Clean work area and equipment with various cleaning aids such as wipes, brooms/mops following standard operating procedures., • Maintain documentation of inspections and cleaning including logbooks and batch record documents., • Analyze conditions/issues using analytical skills to develop a solution., • Assists management with data analysis, report writing, investigations, and other tasks as assigned., • Assist in team development by training, mentoring, coaching., • Knowledge of contemporary electrical and mechanical technologies and packaging., • Knowledge of production maintenance practices and procedures., • Knowledge and skill in operating various specialized equipment., • Knowledge and skill in interpersonal communications including coaching, counseling, and providing leadership to team., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to effectively present information and respond to questions from managers, coworkers, and other individuals., • Demonstrates flexible and efficient time management and ability to prioritize workload., • Ability to pay close attention to detail and coordinate various activities simultaneously., • Associate degree in electrical and mechanical technologies, or equivalent combination of experience and education. 3-5 years’ experience in a similar field with background in pharmaceutical manufacturing, equipment maintenance, or equivalent combination of training/experience., • Typical 3rd shift production schedule is 4, 10-hour days. Must be available for various days of the week and a 5-day schedule as indicated. Overtime rates apply to hours over 40 per week., • Standard work hours for 3rd shift are 8:00 PM - 6:30 AM. Alternative work hours/work schedule may be required at the discretion of management. A 15% differential for working on 3rd shift. Training will occur on 1st shift., • Legally authorized to work in the United States The pay range for this position is $45760.00 - $47840.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Syracuse,NY. Application Deadline This position is anticipated to close on Sep 16, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionDescriptionLocation: SUNY Medical Address: 750 E ADAMS STPosition: Maintenance Shift: Weekends (Daytime hours) Pay: $18 The Maintenance staff performs a variety of tasks to ensure a smooth operation of the parking facility, while delivering service that exceeds our customer/client’s expectations. Depending on the needs of the location, the Maintenance staff is responsible for general maintenance and repair of parking equipment. The Maintenance staff works closely with fellow team members, Operations Manager, and/or Shift Supervisor to ensure that standards are met at all times. Key Responsibilities • Assist with sign installation and/removal, litter pick-up and garbage removal, • Snow removal and pressure washing as directed, • Representing the company in the case of accidents within the facility, • Coordinating with the property security as required with any garage and/or parking related issue, • Assist with repair of broken gate arms, • Other duties as assigned, • Responsible for equipment belonging to Reimagined or the Property Manager valued at anywhere from $200.00 up to $50,000, • Interact face to face with our customers (Service is priority), • Must ensure that the site at which the individual is working is kept clean, neat, and free of any obstacles in accordance with the requirements of that site using the equipment required/provided to perform these duties, • Has control of all tools and equipment required to perform his/her duties, • Make suggestions and recommendations relating to the way various jobs are performed, • Consults with his/her supervisor or manager regarding items of relevance to the parking operation, • Each employee is required to log all the issues/events in the log book, and bring them to the attention of his/her direct supervisor, • In problem situations the jobholder will coordinate, in order to achieve a resolution through his dealings, with his his/her supervisors or manager, • Act as a front line employee which is considered an extremely important function of this position, • Uniforms must be worn when on duty in a neat and well groomed manner. Appearance is representative of the company, • Responsible for prioritization of various jobs with his/her supervisors/manager, • Must be organized, • Strong command of the English language, be friendly, even tempered, cooperative, able to work independently and be able to communicate effectively, • Basic knowledge in the use of pressure washer and power tools and ability to tow a trailer, • Ability to operate a snow plow would be an asset, • Ability to drive a number of various different types of vehicles (Automatic or Manual Transmission), • Knowledge of various parking related machineryEDUCATION / SPECIALIZED KNOWLEDGE REQUIREMENTS:, • Previous experience with general repairs and maintenance functions, • High School Diploma or GED required, • Comprehensive Medical, Dental, and Vision Plans., • Life and Disability Insurance, • 401K Plan with Generous Employer Match and Immediate Vesting, • Generous Paid Time Off (PTO)

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications, • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to Machine Vision demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Hiring Immediately, Automotive Service Advisor Driver’s Village, a World Class Transportation Provider, continues to grow and we are seeking customer-service-oriented Automotive Service Advisors to join our successful team. If you like working with people – even if you have no automotive experience – this career is for you! Driver’s Village represents over 17 automotive franchises, serving hundreds of customers each month. We’ve been making customers happy for nearly 85 years, by providing safe and reliable transportation. Duties and Responsibilities Include but are not limited to: • Greet customers and answer questions, follow status of customer's vehicle from service bay entry through completion of work, keep customers informed of changes, ensure customer's concerns were addressed and they are satisfied, • Develop a deep understanding of our service offerings, including technical aspects, benefits, and value proposition, • Accurately enter Repair Orders for all types of service, including warranty and customer pay, • Guide service department customers through the auto repair and maintenance process, advise customers on options and costs, offer additional services and 'specials', schedule service appointments and more, • Conduct business in an ethical, and honest fashion with integrity, • A goal driven self-starter with excellent sales, customer service, communication, computer, and listening skills, • A positive attitude, good work ethic, and professional appearance, • Strong problem-solving abilities and a solution-oriented mindset, • Able to work in a fast-paced environment and manage multiple tasks simultaneously, • Pleasant, energetic, conscientious and dependable, • Works well with others in a team atmosphere, • 40 Hour Work Week, • Excellent health, vision and dental benefits, • Modern Dealerships and Facilities – Air conditioned shops in the summer, heated in the winter., • Great career and earning opportunities at the largest auto dealer group in CNY, • Never work on Sundays or Holidays, • Recognition Programs, • Medical, Dental & Vision Coverage, • 401K Program, • Life Insurance & Disability Coverage, • Enhanced Vacation Plan & Paid Holidays, • Never work on Sundays or Major Holidays, • Paid Bereavement Call 315-233-5310 for additional questions. We are an Equal Opportunity Employer. We consider all applications for all jobs without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, transgender status, gender dysphoria, predisposing genetic characteristics or carrier status, disability, marital or family status, pregnancy, veteran status, arrest or conviction record, domestic violence victim status or any other legally protected class or status. Please notify a company representative if you require a reasonable accommodation to participate in the application and/or interviewing process.

Job Description At St. Camillus, we’re Centered on Celebrating our Employees, our team is what makes St. Camillus such a great place to work! We are currently hiring Full Time Maintenance Staff II to join our team! Responsibilities: Responsible for completing assigned tasks, regularly scheduled preventative maintenance, reporting any unsafe conditions. • Responsible for own tools and safe practices with all tools., • Responsible to respond in a timely manner to work requests., • Cleans up after work of maintenance is completed or at the end of the day., • Must have a good working knowledge of painting, Drywall installation / repair, plumbing, • Maintains records on repairs, painting projects, grounds, building rounds etc., • Prioritizes work orders and requests by department., • Responsible for all equipment, building, and office maintenance for the facility, • Checks climate controls on a daily basis to insure proper heating and cooling., • Assists with wheelchair admission preparation and repairs., • Ensures repairs are made to electrical, plumbing and air conditioning units., • Initiates changes that will lead to energy savings and preventive maintenance on equipment., • Ensures boilers, air conditioners, and compressors are prepared for seasonal change over., • Responsible ensure pumps, heating and cooling valves, boilers are maintained in good working condition., • Responsible for monthly load testing of Back-up generators and the documentation completed per policy. Generators are in good working condition in the event of an emergency., • Responsible for the operation and repair of various machines and equipment used in the maintenance of the Facility., • Ensures repairs are made to equipment used in the maintenance of the Facility., • Operates all tools (hand or electric) properly and safely, • Operates various motor vehicles to pick up and deliver office equipment and supplies and is responsible to ensure such equipment in maintained in good working order., • When on call, Responds 24 hrs/ 7 days/week to any emergency in the Facility unless alternate arraignments have been made. Must also ensure the 24hrs/7days on-call coverage is maintained by Maintenance Staff., • Monitors building management system for all buildings., • Responsible to help prepare physical plant for State Surveys, HUD inspections, State and Local Code Enforcement visits and any other inspections or surveys., • Responsible for employee injury prevention, follows safety rules, wears PPE properly and addresses safety issues with supervisor., • All other duties as assigned by supervisor. Qualifications: • Minimum Education: High School Diploma or equivalent., • Experience Required: 3-5 years related experience working in a maintenance capacity. Employee Benefits: • No Mandated Shifts!, • Additional Pay Incentives (On-call Pay), • Daily Pay, • Generous Paid Time Off! (Vacation/Personal/Sick & Holiday Time), • Affordable Health/Dental/Vision Insurance Plans, • Company Provided Life Insurance and Health Reimbursement Account, • Retirement Plan Options, • Tuition Reimbursement Program, • Located on the Centro Bus Line, • Free Parking, • On-site cafeteria, • And Much More! Why Work At St. Camillus? Our Mission: St. Camillus is a non-denominational, not-for-profit organization dedicated to caring for life through a broad range of health care services. Our Vision: To be the provider of choice for compassionate and innovative care. If you are interested in joining a team of professionals who are committed to providing high quality services in a caring environment, we want to hear from you! To find more information about St. Camillus and Integrity Home Care Services visit our website at EOE/Affirmative Action Employer

Job Description Responsible for work in the maintenance and repair of vehicles and heavy equipment used in fleet operations. Driver's license is required. 2-3 years of mechanical experience is required. Hydraulics experience is preferred. Experience with repairing specialty equipment such as Jarraffs is preferred. You will be responsible for troubleshooting issues and fixing them, aiming for maximum reliability and functionality as well as helping around the yard and driving a truck half of the time. This position requires you to work at the shop and in the field locally as needed. The Ideal candidate will have their own tools. Essential Job Functions: • Inspects parts for accuracy and condition; assists in the maintenance and security of parts storage facilities., • Assists with the collection and inspection of fire extinguishers., • Perform inspections and repairs in the field., • Maintains records of work performed and materials used. Education and Experience: High School diploma/GED; AND successful completion of an accredited program in vehicle repair and maintenance; AND two (2) years of experience in the repair of vehicles and heavy equipment; OR an equivalent combination of education, training and experience. Required Knowledge and Skills: • Safe work methods and safety regulations pertaining to the work., • Shop mathematics., • Record keeping practices., • Computer applications related to the work., • Communicating effectively in oral and written forms., • Techniques for dealing with a variety of individuals from various socioeconomic, ethnic and cultural backgrounds, in person and over the telephone. Skill in: • Diagnosing and repairing a wide variety of vehicles and equipment., • Using hand and power tools skillfully and safely., • Preparing records and reports of work performed., • Reading and interpreting manuals, specifications and drawings., • Understanding and following oral and written directions., • Estimating necessary materials and equipment to complete assignments., • Using initiative and independent judgment within established procedural guidelines. Required certificates and licenses: Continued employment is contingent upon the following required licenses being maintained in active status without suspension or revocation. • Only a Driver’s License is required., • CDL preferred. PHYSICAL DEMANDS & WORKING ENVIRONMENT: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: • Perform preventive maintenance & service inspections on a variety of transport refrigeration units (TRU) & auxiliary power units (APU) & heater equipment, • Perform diagnostic, repair work on mobile refrigeration equipment, auxiliary power units & heater equipment, • Follow established technical & administrative processes, • Complete repair orders & parts usage forms, • Communicate effectively with supervisor, team members & customers, • Remain current on technical & regulation requirements, • Thermo King University Certi-Tech certification (to be completed within one year) and maintained, • EPA 608 & 609 certifications (to be completed within one year), • On Call duties rotation once skill level and training requirements have been metRequirements:, • Experience in the field of transport refrigeration equipment (Thermo King or Carrier Transicold preferred) a BIG Plus, • Skills to sufficiently install, diagnose and repair transport refrigeration, air conditioning and heating equipment, • Demonstrate technical knowledge of refrigeration systems, components, materials, methods & equipment to perform, prioritize and complete job assignments, • Own & maintain the proper hand tools to perform job functions, • High school diploma or equivalent, technical trade school a plus, • Proficient with computer operation/usage, • Valid driver’s license

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non-Exempt Travel: 90% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelor’s or associate Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening.

Job Description Job Title: Electrical Engineer Reports To: Maintenance Manager FLSA Status: Exempt Supervisory Responsibilities: No – Individual Contributor Essential Job Functions and Responsibilities: • Electrical engineer must have a strong understanding of electrical manufacturing processes., • Must be able to read, write and analyze electrical schematics and wiring diagrams., • Electrical engineer must have a broad knowledge of electrical principles, wiring specification codes and handbook formulas along with a working knowledge of PLC’s, VFD’s, Motor Control, and Power distribution., • Electrical engineer must have the capacity to analyze a problem from multiple perspective and explore creative solutions., • Must be able to devise testing methods and properties to confirm the functionality of electrical components and systems., • Determines proper type, size of materials and equipment for the job, including power requirements., • Performs electrical work requiring high degree of trade skill to install, test, inspect, adjust, repair and wire all plant equipment and circuits to required voltages and tolerances., • Able to locate, diagnose and remedy troubles quickly to avoid shutdowns and able to adjust all plant equipment to proper operating characteristics., • Fabricates material to be used for electrical equipment., • Performs other related duties as assigned. Required Skills or Abilities: • Ability to work individually or collaboratively on a team., • Utilize precision devices such as voltmeters or other measuring instruments., • Strong organizational skills and attention to detail., • Possesses time management skills with a proven ability to meet deadlines., • Proficient with Microsoft Office Suite or related software. Physical Requirements: • Requires work such as sitting at a desk and computer for periods of time, standing or walking up to 8 hours at a time on hard surfaces., • Must be able to traverse manufacturing plant and warehouse to access a variety of storage spaces and shelving units by stretching, squatting, and/or reaching., • Work is performed in a manufacturing plant with some exposure to environmental factors such as loud noises, odors, variances in temperature or weather and other factors., • Must be able to lift 25 pounds at times without assistance, up to 50 pounds with assistance. Education and Experience: • Requires a bachelor’s degree in Industrial Electrical Engineering or an alike field., • 5-10 years industrial electrical and/or mechanical experience.

Job Description Do you have experience as a PLC Master Technician and looking for an amazing career? Affinity Recruiting is looking for a PLC Master Technician for an amazing company near Syracuse, NY. Ideal candidate will have experience trouble shooting Allen Bradley PLC’s, Micro Logic, SLC and Control Logix to be considered. Also, ideal candidate must be willing to work weekends and overtime as needed. Candidate requirements: * Must know how to install and maintain high speed industrial equipment. * Able to troubleshoot, repair all electrical defects of the equipment and make adjustments where it is needed. * Must perform preventative maintenance on the industrial equipment, on electrical equipment, transducers, solid state circuits, inspection of the equipment and understand complex timing and inspect all devices. * Able to install by reading design prints and instructions. * Able to diagnose and troubleshoot on the PLC and standard ladder diagrams. If you have this experience, we would love to hear from you! Please apply to this posting and a recruiter will reach out to you as soon as possible!

Job Description Job Title: Reefer Technician Company Introduction: G&C Food Distributors is a re-distributor of refrigerated, frozen, and dry food. We store and deliver more than 4,000 food items to meet the needs of our customers across 27 states and 35 countries internationally. In recent years, G&C Foods has become one of the most respected redistributors in the United States. We are rapidly expanding all areas of our organization. Enjoy hands-on work and keeping things running smoothly? As a Reefer Technician, you’ll ensure our refrigerated trailers are in top condition and ready to roll! Location: Syracuse, NY Job Summary: The Transportation Maintenance Mechanic will be responsible for all maintenance on our fleet of over 160 trucks. Duties and Responsibilities: • Performing preventative maintenance and required repairs on G&C-owned diesel equipment such as Yard Trucks, Trailers, and Road Tractors, • Performing minor repairs to G&C Leased equipment when necessary, • Assist the Transportation Maintenance Supervisor with repairing the washing equipment, • 2-6 of experience in Reefer Trailer Repair, • Air Brake Certification preferred, • Diesel Engine Certification preferred, • Reefer Experience required, • NYS Driver’s License required, • CDL A or CLD B preferred, • Inspectors License preferred, • EMPLOYEE HOT DEALS! Everyone's favorite benefit for purchasing all kinds of products for crazy discount prices!, • Excellent Benefits including medical insurance as low as $27.43/week, Vision, Dental, 401k, company-paid life, • Potential for annual associate bonuses of up to an additional 3 weeks’ pay, • Onsite gym/wellness center, • Flexibility with scheduling needs, • Cookouts, • Holiday turkey and ham, • Opportunity for advancement throughout the company, • Open door policy, • Annual Flu Clinic... and so much more! Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you!

Job DescriptionDescription: WE'RE GROWING!! COME GROW WITH US!! If you have experience in industrial refrigeration repair - we want YOU! What are you waiting for?? What's in it for you? • Daily per diem and hotel reimbursement., • Above average pay, • Paid Vacation, • Mon-Fri with opportunity for overtime of 10 hours/week, • Medical, Dental and Vision, • Teladoc (virtual medical visits), • HSA (Health Savings Account), • Profit Sharing, • 401K with company match, • Short-Term & Long-Term Disability, • Life Insurance, • Clean and safe work environment. Requirements: Must be a “Road Warrior” able to travel nationwide up to 90% (Required). • 3-5 years of previous experience in Industrial or Commercial Refrigeration (Preferred)., • Previous experience with Ammonia and Freon Refrigerant (Preferred)., • Responsible for conducting diagnostic procedures, troubleshooting, repairing, and performing routine preventive maintenance on industrial refrigeration equipment, as necessary., • Knowledge of reciprocating, screw compressors, electrical troubleshooting, and common types of industrial refrigeration and or gas compression experience., • Possess the ability to problem solve, identify, document, and follow through on repairs and replacements.

Job DescriptionAuto Systems Centers is an Employee owned company (ESOP) and is also the worlds largest Midas Franchisee in the Midas chain. Every Team member receives company stock (after first full fiscal year) every year; HUGE!!! Our company culture is all about taking care of our Teams (people) so they can take care of our customers (Take care of People and People will take care of you) Our Goal is to make every Team member feel "Valued" and carry out their "Purpose" each and every day. Our Management style is "Servant Leadership", Serving our Teams and Leadership Development so we can better Serve our Customers. We Model/Live this in everything we do. Midas has a rich history and an iconic name in automotive maintenance, repair and tire industry as a company that is both progressive and cutting edge. We are about "TEAM": Our Team member benefits include: • 5-day work week; Family Friendly hours for our Team, • No Sundays and everyone is on a 5 Day work week., • Paid Holidays, • Paid Time Off after 6 Months, • Health, Dental, Vision, Prescription & Life Insurance, • 401K with Matching Funds (Dollar to Dollar match), • Advancement Opportunities, • Employee tool purchase program, • Great Weekly Pay, • We cover uniform expenses.We are looking for people that have a Great Attitude, Great Attendance and want to be a part of a winning Team!

Job Description AUTOMOTIVE – SERVICE ADVISOR - FOR THE ALL NEW FRIENDLY HONDA OF FAYETTEVILLE DEALERSHIP. We are looking for dedicated service professionals to build our service operations and provide our customers with exceptional experiences. The ideal candidate will flourish in a fast-paced and professional workplace. What We Offer • Medical, dental, and vision, • 401K, • Paid vacation and sick time, • Paid uniforms, • High income potential Responsibilities • Greet customers promptly, • Obtain customer and vehicle information, • Clearly report all vehicle symptoms to technician as described by the customer, • Determine and recommend needed maintenance based on age, mileage, and vehicle history, • Prepare complete and accurate estimate for cost of Parts & Labor, • Establish follow-up time, • Monitor the progress of each vehicle throughout the day, updating customers frequently, • Verify final invoice reconciles with work performed on the repair order, • Explain all completed work and charges to customers, • Perform active delivery with customer, • Next day follow-up with customer Qualifications • Minimum 1-year experience in a service advisory role, • Exceptional customer service & communication skills, • Positive attitude, • High volume mentality, • CSI focused

Job DescriptionJob Description: Isaac Heating & Air Conditioning is seeking an experienced Residential HVAC Service Technician for their Syracuse, NY location. The ideal candidate will already have HVAC work experience and be able to perform repair/maintenance work in a thorough and accurate manner. Summary: For over 75 years, Isaac Heating and Air Conditioning has worked diligently to meet the changing heating and air conditioning needs of homeowners and businesses in Upstate and Central New York. Isaac is one of the nation's largest privately held HVAC/R contractors and services over 35,000 clients a year. Creating an enjoyable experience met with anticipation results in an environment where our team, clients, and community can comfortably grow, prosper, succeed, and improve their quality of life. Isaac partners with leading HVAC and plumbing companies throughout the United States, providing the support and resources of a large national company. Responsibilities: • Services all equipment according to an established service schedule, and company standards and within acceptable time frames as well as troubleshoot and rectify potential problems on location., • Interact with homeowners to educate, build relationships, and understand and address their HVAC concerns., • Documents legibly and accurately all work completed according to company policy and submits on a daily basis., • Builds and maintains customer relations in the field to ensure excellent customer service and enhance the company's image., • Follows all safety procedures, including following all safe driving habits and not utilizing mobile devices in vehicles., • Applies knowledge of products and seeks additional training/education as appropriate. Job Qualifications: • High school diploma or equivalent required, • EPA – Universal Certification preferred, • Valid driver’s license / clean driving record, • OSHA 10-hour Construction Course preferred, • Ability to lift and move up to 50 pounds, • At least 2-5 years of HVAC Experience preferred Competencies: • Excellent written, verbal, and active listening skills, • Exceptional customer service skills, • Technical knowledge, • Strong organizational skills, • Ability to work individually and as part of a team, • Customer focused, • Problem-solving skills What can we offer you? • Competitive High Base Salary, • Paid Personal Days, • Paid Holidays, • 401k Plan, • On-the-job training The starting hourly base wage for this position is $23-36/hr. This is the range of the base pay only, it does not include other components that make up the total compensation package of the position. If offered a position, your total compensation package will be determined by experience, location, skills, and/or education which may result in a total compensation package that falls outside of the provided range. Isaac Heating & Air Conditioning (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy, or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state, or local law.

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job Description Job Summary: The Service Advisor is responsible for scheduling service work in the service department and selling additional service to customers. Essential Job Duties and Responsibilities: (Additional duties as assigned) General: • Maintain Customer Satisfaction Index rating within the top 10% of group., • Maintain a dealership assigned standard for “hours per customer repair order written”., • Ensure that all documents are accounted for., • Sell at least 100% of available hours per day., • Greet customers in a timely, friendly manner. Let customers who are waiting in line know that they will be helped soon., • Schedule appointments using dealership DMS, • Communicate with service customers to determine the nature of the mechanical problems and provide all available information to technicians on repair order., • Refer test-drives to technicians., • Advise customers on the care of their cars and the value of maintaining their vehicles in accordance with the manufacturers’ specifications, using maintenance menus (if applicable)., • If additional work is needed, explain the details to the customer, including the additional cost and time considerations., • Indicate on repair order the exact repair instructions, making a special note of the main reason(s) the customer brought the vehicle in. Repair orders must be legible., • Notify team leader of upcoming work., • Provide estimates for labor and parts. If the cost of service cannot be established during reception, leave open and contact the customer later, by phone, for approval., • Establish each customer’s method of payment. Obtain approval of credit, if necessary., • Establish “time promised” and check with person responsible for work distribution if necessary., • Obtain customer’s signature on each repair order; provide customer with a copy., • Follow up progress of each repair order during the day. Contact customers by telephone regarding any changes in the estimate or time promised. Record changes on repair order in approved fashion., • Handle telephone inquiries regarding work in progress and appointments., • Ensure quality check in problem vehicles., • Be available to answer any questions at vehicle delivery., • Maintain follow-up program on additional items found in need of repair., • Inspect each completed repair order hard copy carefully. Make sure repair order is completed and properly priced before closing out (includes flagging of repair orders)., • Operation and failure code of all warrant claims in computer., • Get approval for all internal work., • Perform active delivery., • Call all Special Order Part customers daily., • Inform customers of all warranty and non-warranty work., • Keep advisor area clean., • Get customer approval before work is performed and document approval with time and date., • Wear name tags and uniform., • Get manager’s approval for all non-warranty, good will, and rental vehicles. Required Experience and Education: • High School Diploma or General Educational Diploma (GED)., • One year dealership experience preferred. Additional Requirements: • Strong interpersonal and communications skills., • Ability to prioritize and organize work in a multitasked environment., • Excellent verbal and written communication skills., • Attention to detail., • Strong organizational skills including the ability to manage multiple tasks and details simultaneously., • Ability to sit, stand, walk, talk, hear, use hands to point, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Exerts up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Work is performed in a dealership setting (lot, showroom, service department and offices)., • Occasional weekend and evening hours are required. Hazards and Safety Precautions: • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With a focus on four key platforms, our vision is to provide top-notch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Rezolut is seeking Medical Imaging Service Engineer to provide service and repair to Mammography, Ultrasound, MRI, CT, and X-ray systems nationwide. We are an industry leader with training and career growth opportunities. We offer an excellent pay rate, paid time off, and benefits package options. The Field Service Engineer will be responsible for meeting the daily service maintenance and repair needs of the company’s equipment as well as our customers’ equipment. This position requires regular travel. Below are the equipment manufacturers and modalities that would primarily be serviced: • Siemens – Mammography, MR, and US, • GE Mammography and US, • Philips CT, MR, and US, • Basic troubleshooting, installation, maintenance and repair of radiological equipment., • Completing Preventative Maintenance and modifications., • Setup, calibration, QC and QA of customer’s equipment according to OEM specifications., • Keeping up to date on administrative responsibilities such as maintaining service records in a timely manner., • Maintaining daily communications with customers to ensure resolution and proper follow-up., • Maintaining tools and test equipment and ensuring they are properly calibrated., • Working as a member of Assured Imaging’s team as well as being able to work independently, to provide efficient service., • The ability to lift, carry, and move tools and necessary equipment., • Adhering to current regulatory requirements to include, but not limited to, HIPPA, OSHA and FDA., • Associate's degree or Radiology OEM training, Electrical, Technology, equivalent military experience or Associates Degree with 2 or more years’ experience in servicing Diagnostic Imaging equipment., • Must have experience servicing diagnostic imaging equipment., • Experience interfacing with both internal team members and external customers as part of a solution-based service process., • Valid driver’s license and good driving record is required., • Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment., • Proficient level of computer skills including MS Word, PowerPoint, Excel and Outlook., • Excellent analytical, interpersonal and communication skills with the ability to communicate complex technical issues in an easy to understand manner., • Ability to work in a fast-paced, self-directed, entrepreneurial environment., • Resourceful, with the ability to work independently., • Strong time management skills., • Ability to adapt to changing circumstances., • Decision-making, problem-resolution and creative thinking skills, • Attention to detail., • Ability to multi-task activities with shifting priorities. Able to work productively in a pressurized environment. Pay: $80,000.00 - $100,000.00 per year Benefits: • Immediately accrue PTO as you work! (Full Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances for full-time employees, • 401(k) Retirement plan, • Employee Assistance Program

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Syracuse, NY. Most positions are first shift with a pay scale of up to $30/hour based on experience and skill level. If you are a Millwright and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope to include any or all of the following: • Installation, Maintenance, Repair of Industrial Machinery and Equipment, • Conveyor Work, • Installing Racking, • Helping with Set Up, Remodel & Assembling New Conveyors, • Some Welding, • General Labor, Job Site Clean Up, • Moving/Relocating Machinery, • Shut Down Work, • Mechanically Inclined, • Basic Tools for the Trade, • Proper PPE must be worn Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Syracuse, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job DescriptionCompany Profile: Anderson Equipment Company is one of the largest heavy equipment distribution companies in the Northeast. It is a family-owned, private company that has consistently grown and achieved financial success for almost 90 years. Currently in its third generation of family ownership and management, the company spans six states – West Virginia, Pennsylvania, New York, New Hampshire, Vermont, and Maine with 19 branch locations. Job Description Summary: The Service Manager is responsible for leading the branch service department and overseeing technicians and mechanics who work in the shop and the field. The technicians perform a variety of functions, including maintaining the Company’s rental fleet, performing scheduled maintenance or warranty work, diagnosing and repairing customer equipment. The Service Manager will work with the Branch and Parts Managers to coordinate cost effective reliable service for our customers and to ensure that safety, responsiveness and professionalism are prioritized. The Service Department Manager will be responsible for maintaining workflow, including scheduling repairs, assigning mechanics, and setting priorities, while effectively managing work orders and timely completion of repairs. Managers will also be responsible for driving to job and customer sites to meet with potential buyers and customers. The Service Manager is ultimately responsible for revenue and gross margin growth, and profitable operations. Anderson Corporate functions (HR, Sales Support, Credit) will support Service Manager to facilitate achievement of results. Required Qualifications: • Minimum of 5 years of management experience in Service Department., • 5+ years of work experience with P&L responsibility and achievement of profitable results., • Proven track record in training, scheduling, and managing field technicians., • Strong technical competence in mechanical functions and specialized equipment repair., • Excellent leadership and interpersonal skills, with the ability to motivate and develop a team., • Proficiency in computer systems and software relevant to service operations., • Strong problem-solving abilities and decision-making skills., • Compensation Range depends on Manager’s ability to achieve profit and bonus targets: $80,000-$100,000., • Compensation consists of salary and bonuses based on achieving annual targets., • Benefits include Medical and Prescription Drugs, Dental, Vision, Life Insurance, STD, LTD, Heath Savings Account, Employee Assistance Program, Paid Time Off (PTO)., • Retirement Savings is a 401K Plan with Match and Profit Sharing contributed by the Company., • The Company supports professional development through career advancement opportunities, transfers to other branch locations, tuition reimbursement, and company-sponsored training programs.

Job DescriptionDescription: Job Title: Refrigeration Technician Apprentice Job Description: We are seeking a motivated and enthusiastic Refrigeration Technician Apprentice to join our team. This position offers a unique opportunity to learn a high-demand trade while assisting in the installation, maintenance, and repair of transport refrigeration units. The ideal candidate will work closely with experienced technicians and participate in both on-the-job and classroom training sessions. Key Responsibilities: • Assist in the installation, maintenance, and repair of transport refrigeration units., • Collaborate with senior technicians to learn best practices and techniques in the field., • Participate in on-the-job training and classroom training sessions to enhance technical knowledge., • Support internal business processes to ensure efficient operations within the team., • Commit to obtaining relevant certifications and training as required for professional development. Qualifications: • High school diploma or equivalent., • Basic mechanical aptitude and a strong interest in refrigeration systems., • Strong willingness to learn and develop technical skills., • Ability to work effectively in a team environment., • Good communication and problem-solving skills., • Valid driver's license and clean driving record. We encourage individuals who are eager to learn and grow in the refrigeration industry to apply for this exciting apprenticeship opportunity. Requirements:

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Assistant & Service Managers Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Assistant and Service Managers to join Team Mavis at one or our state-of-the-art automotive service and retail tire sales centers in the Syracuse, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Assistant Manager As a future leader of Mavis, the Assistant Manager supports the Store Manager to ensure each Mavis retail location operates efficiently, safely and effectively. Using fundamental leadership skills, Assistant Managers are responsible for enforcing established policies, procedures and standards, scheduling mechanics/technicians' work, managing outside orders, ensuring the quality and timely completion of jobs, meeting customer expectations, and the safety of team members About the Position of Service Manager The Service Manager is responsible for assisting customers with tire selections and recommending necessary under-car repair services. In addition, to ensure complete customer satisfaction by delivering timely completion of high-quality vehicle repair and maintenance, Service Managers must direct the workflow of Mechanics, Alignment Technicians and Tire Technicians and stage vehicle repair/maintenance work. While driving the sales initiatives of Mavis, Service Managers must communicate directly with customers, assess customer needs, provide information regarding requested and/or necessary automotive repairs and maintenance, ensure customers are satisfied with their in-store experience and strive to meet customer expectations. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Assistant / Service Manager, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess (i) 1 year of experience and/or training in automotive parts and/or tire sales, (ii) 1 year of experience and/or training in automotive repairs/maintenance, or (iii) any combination of education, training, and experience which demonstrates the ability to perform the duties and responsibilities of the position. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principal of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived membership in any category or status protected by applicable federal, state, or local law. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Where appropriate, Mavis may provide reasonable accommodation for an otherwise qualified individual to perform the essential functions of the position. Mavis does not seek salary history information from applicants. Job Posted by ApplicantPro

Job DescriptionDescription: Job Summary: We are seeking a skilled and proactive Facilities Director to oversee the operations, maintenance, and safety of multiple sites. The ideal candidate will ensure that all locations are efficient, well-maintained, compliant with health and safety standards, and provide a great environment for employees and visitors. You’ll be managing vendor relationships, leading maintenance teams, and developing and implementing strategic improvements across all facilities. All resumes should be submitted by Thursday, September 4th, 2025 Essential Job Duties and Responsibilities: (Additional duties may be assigned) Facilities Operations & Maintenance • Manage the operations, maintenance, and repair activities of current properties., • Conduct regular site inspections to ensure buildings and campuses meet company standards., • Develop and implement preventive maintenance programs tailored to building systems., • Manage warranties, service agreements, and maintenance logs for facility equipment and systems., • Oversee vendor contracts and building service agreements., • Establish and manage service contracts including cleaning, security, landscaping, and mechanical systems., • Ensure compliance with all applicable codes, laws, and safety regulations., • Set up building management systems, emergency protocols, and operational best practices., • Act as the primary liaison for all building maintenance activities, ensuring prompt resolution of facility issues and effective coordination with tenants., • Respond to tenant service requests and inquiries, delivering timely and reliable support to maintain high satisfaction levels., • Coordinate with facilities vendors and contractors to oversee routine maintenance, repairs, and improvement projects., • Monitor and track facility-related service tickets to ensure quality control, timely resolution, and clear tenant communication., • Maintain accurate documentation of service requests, maintenance schedules, and vendor performance metrics.Requirements: Qualifications: • 5+ years of facilities management or property management experience., • Well-versed in the operation and maintenance of HVAC, electrical, plumbing, and wastewater systems., • Experience managing new facilities is preferred., • Collaborates on budgeting, managing vendors, and negotiating contracts to support operational goals, • Excellent organizational, communication, and leadership abilities. Supervisory Responsibility This position will oversee other facilities staff at all sites. Position Type and Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:30 a.m. to 5 p.m. but may require after work or weekend hours depending on need. Travel Some travel between sites will be required. Special Requirements: Position offers opportunities for growth as the company expands its real estate portfolio. • Basic computer skills that include the ability to post information to a database or spreadsheet and perform basic word processing and/or data entry., • Able to plan, allocate resources, manage production and coordinate people and equipment., • Comprehensive knowledge of general building maintenance and repair skills., • Ability to read, understand, follow, and enforce safety procedures., • Able to organize tasks and set priorities effectively., • Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community., • Ability to read and interpret documents such as safety rules, blueprints, drawings, operating and maintenance instructions, and procedure manuals., • Ability to monitor and/or maintain quality control standards., • Knowledge of facilities services including electrical, plumbing, HVAC, utility operations, building maintenance, carpentry and finish work., • Skilled in using a variety of hand and light power tools for repair and upkeep duties. Physical and Mental Requirements: • Duties can be physically demanding and repetitive, involving much bending and lifting. The employee is regularly required to stand, walk, lift, push, pull, use hands to finger and grasp, stoop, kneel, crouch, bend, talk, hear and perform repetitive motions. The individual is occasionally required to climb, balance, and crawl., • Ability to exert up to 100 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Requires strong focus and hand-eye coordination to operate tools or processes that demand precise control and quick adjustments., • Ability to wear safety equipment on a regular basis including, glasses, hearing protection, hard hat, and gloves. Work Environment: While performing the duties of this position, the worker is exposed to inside and outside environmental conditions, extreme heat, cold, potential for physical injury, fumes, strong odors or airborne particles and occupational hazards which require routine precautions. Disclaimer: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion.

Job Description Job SummaryWe are looking for an Automotive Technician to join our successful dealership service center. As an Automotive Technician, you will be responsible for diagnosing and repairing vehicles. You must be comfortable using the dealership’s computer software and have extensive knowledge of vehicle systems. If you have a “never give up” attitude and are willing to problem-solve until you find the best solution for the customer, we want to hear from you. Responsibilities • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise mannerQualifications, • High school diploma or GED is required, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communications skills are required, • 3+ year's experience

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise manner Qualifications, • High school diploma or GED is required, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred

Job Description We have an opening for another full time A-B level tech. We are a straight time shop, not a flat rate shop. Our tech will perform maintenance and service work on customer cars and used car here at our store. We invite you to go to our award winning website to learn more about SelectEuroCars,Inc. We are a non-franchised dealership, Specializing in Volkswagen-Audi Automobiles. We have been in Upstate New York, Finger lakes Region for the last 44 years. Our current benefit package includes 401k matching up to 3% and employer paid health insurance for employee with eligibility after 90 days. We also offer dental insurance, at employee cost. We are conveniently located off the NY state thruway , equal distance from Rochester...Syracuse and Ithaca, aprox 4 ½ hrs from NYC.. Position is located in Waterloo. Standard hours are M-F 8-5 with an hour lunch break and two paid 15 minute breaks during the day. Availability for occasional overtime/Saturday/Sunday a plus but not a requirement. Driver's license required, NYSI license and ASE Certification a plus but we will cover cost of ASE Certification, Relocation bonus negotiable. Please feel free to email Myself or Preston back, and we would enjoy speaking with you more over the telephone at a mutually convenient time. Sincerely, Joel Osserman, President ASE Blue Seal Certified Repair Facility Bosch Specialist, AAA Approved Certified Master Dealer Company Description44 year independent VW/Audi Specialty Shop44 year independent VW/Audi Specialty Shop

Job DescriptionAuto Systems Centers is an Employee-owned company (ESOP) and is also the world's largest Midas Franchisee in the Midas chain. Every Team member receives company stock (after first full fiscal year) every year; HUGE!!! Our company culture is all about taking care of our Teams (people) so they can take care of our customers (Take care of People and People will take care of you) Our Goal is to make every Team member feel "Valued" and carry out their "Purpose" each and every day. Our management style is "Servant Leadership", Serving our Teams and Leadership Development so we can better Serve our customers. We Model/Live this in everything we do. Midas has a rich history and an iconic name in automotive maintenance, repair, and tire industry as a company that is both progressive and cutting edge. We are about "TEAM": Our Team member benefits include: • 5-day work week; our hours are 8:00am-6:00pm Monday through Friday & 8:00am to 5:00pm on Saturday. (CLOSED ON SUNDAY), • Technicians work a 40-hour week. Managers work a 5-day week. Every Team member has Sunday and another weekday off, • Paid Holidays, • Paid Vacations, • Health, Dental, Vision & Life Insurance, • 401K with Matching Funds (Dollar to Dollar match), • Advancement Opportunities, • Employee tool purchase program, • Weekly pay/Direct deposit

Job DescriptionCompany Description Monro, Inc. is one of the nation’s largest auto service companies and major tire retailer. We own and operate more than 1,200 stores in 32 states and our stock trades on the Nasdaq (MNRO). The Monro family of brands includes some the most recognizable names in the industry—Monro Auto Service and Tire Centers, Mr. Tire, Tire Choice, amongst many more regional chains. Our dominance is driven by teammates who strive to provide a five-star experience and deliver consistent value to our guests and shareholders. At Monro, we understand that a 5-star guest experience begins with a 5-star teammate experience. In fact, we’re currently investing more than $100 million in store improvements, new technology, and career development through our own Monro University training platform. Destination Monro – Your Career is Here! Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships; if you value honesty and integrity - we have a Destination for you at Monro. Contact us to learn more. Destination Monro! – Your career is here. Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: $23.00 - $35.00 per hour - Based on experience. This role is eligible for additional compensation and incentives. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives., • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, twisting. Additional Information Benefits • Performance based incentives, • Paid vacation and holidays, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental, • Employee Access Perks Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Syracuse, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technicians you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Alignment Technicians possess a state inspection license. As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principal of equal employment opportunity for all individuals, we enforce a zero tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived membership in any category or status protected by applicable federal, state or local law. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Where appropriate, Mavis may provide reasonable accommodation, in order for an otherwise qualified individual to perform the essential functions of the position. Mavis does not seek salary history information from applicants. Job Posted by ApplicantPro

Job Description Hiring Immediately, Automotive Technician Driver’s Village, a World Class Transportation Provider, continues to grow and we are seeking Automotive Technicians to join our successful team. As an Automotive Technician at Driver’s Village, you won’t simply repair and maintain vehicles, you will ensure the safety and satisfaction of our valued customers. You will enjoy a career working on our world-class team, repairing and maintaining vehicles, building customer loyalty while working in our state-of-the-art facilities. Driver’s Village represents over 17 automotive franchises, serving hundreds of customers each month. We’ve been making customers happy for nearly 85 years, by providing safe and reliable transportation. Duties and Responsibilities Include but are not limited to: • Perform mechanical diagnosis with efficiency and accuracy, • Complete work as assigned on repair orders in a timely fashion., • Communicate with Service Advisors and associates as to the progress and status of each repair., • Examine vehicles for both safety and maintenance items., • Notify other service personnel if work cannot be completed as promised, • Maintain and update all training and certifications. Applicants Should Meet or Exceed these Requirements: • High School diploma or equivalent, • Automotive technical training (varies based on store needs), • Attention to detail, • Organization and follow-up skills, • 40 Hour Work Week, • Excellent health, vision and dental benefits, • Modern Dealerships and Facilities – Air-conditioned shops in the summer, heated in the winter., • Great career and earning opportunities at the largest auto dealer group in CNY, • Never work on Sundays or Holidays, • Recognition Programs, • Medical, Dental & Vision Coverage, • 401K Program, • Life Insurance & Disability Coverage, • Enhanced Vacation Plan & Paid Holidays, • Never work on Sundays or Major Holidays, • Paid Bereavement Call 315-233-5310 for additional questions. We are an Equal Opportunity Employer. We consider all applications for all jobs without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, transgender status, gender dysphoria, predisposing genetic characteristics or carrier status, disability, marital or family status, pregnancy, veteran status, arrest or conviction record, domestic violence victim status or any other legally protected class or status. Please notify a company representative if you require a reasonable accommodation to participate in the application and/or interviewing process.

Job Description Job Summary: The Automotive Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. They will also oversee the work of any apprentice technician assigned to them. Essential Job Duties and Responsibilities: (Additional duties as assigned) • Receive repair orders from Team Leader and take to stall area., • Perform work as outlined in repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose the cause of any malfunction and perform repair., • Communicate with the parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Advise service advisor and/or Team Leader immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicle when required or refer to the Team Leader, keeping in mind that the customer’s vehicle should not be used for personal errands., • Supervise the work of any apprentice as assigned., • Attend factory-sponsored training classes., • Keep abreast of factory technical bulletins., • Ensure that customers’ cars are kept clean., • Keep the shop area neat and be able to always account for all dealership-owned tools. Return special tools to tool kit in tool room., • Understand and follow federal, state, and local regulations, such as those governing the disposal of hazardous waste., • Be familiar with MSDS location and information. Must wear and/or use all provided protective items, including eye protection, guards, etc., • Road test vehicle to quality check work performed as necessary., • Maintain CSI in top 10% of group., • Adhere to dealership policies and procedures set forth by dealership management and manufacturer specifications. Required Experience and Education: • High School Diploma or General Educational Diploma (GED), • Knowledge of automotive repair and maintenance., • Valid New York State Driver License., • Ability to read and comprehend instructions and information., • Working knowledge of all aspects of repairs for vehicles., • Ability to interpret vendor catalogs., • Must have knowledge of machines, tools including their designs, uses, repairs and maintenance., • Time-management and organizational abilities., • Problem-solving and critical thinking abilities., • Ability to sit, stand, walk, talk, hear, use hands to finger, grasp, handle or feel, push, pull, reach, crouch, bend, kneel, climb, and perform repetitive motions of the hands and/or wrists., • Exerts up to 50 pounds of force occasionally, and/or up to 70 pounds of force frequently to lift, carry, push, pull, or otherwise move objects., • Work is performed in a dealership service department., • Occasional weekend and evening hours are required., • Hazards: Slips, trips and falls, ergonomic injuries, and occasional lifting., • Safety Precautions: Breaks are encouraged to allow for stretching and training is provided covering slips, trips, and falls, safe lifting and stretching techniques.Disclaimer:, • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee(s) occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • The dealership reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description AUTOMOTIVE – HONDA/IMPORT DIAGNOSTIC TECHNICIAN Friendly Auto Group is hiring and we are looking for the best. Are you ready for your career to grow with our organization? Are you looking for ALL NEW equipment to work with? Are you a team player? We are called Friendly for a reason! If the answer is yes to any or all apply today! WE OFFER: • Performance based bonus, • Experience based flat rate hourly wage, • Paid training, • Uniforms supplied, • Paid vacation, • Paid sick time, • 401K, • Health and dental insurance, • Accurately diagnose vehicles., • Perform regular maintenance services to customer vehicles., • Communicating effectively with Service Advisors., • Good knowledge of automobiles, • Effective analytical and communication skills, • Basic computer knowledge, • Ability to learn new technology, repair and service procedures, • Ability to operate electronic diagnostic equipment, • Automotive mechanical experience preferred, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Positive, friendly attitude, • Willingness to train a must, • Proficient Electrical Diagnostic

Job Description AUTOMOTIVE – HONDA/IMPORT EXPRESS TECHNICIAN Friendly Auto Group is hiring and we are looking for the best. Are you ready for your career to grow with our organization? Are you looking for ALL NEW equipment to work with? Are you a team player? We are called Friendly for a reason! If the answer is yes to any or all apply today! WE OFFER: • Performance based bonus, • Experience based flat rate hourly wage, • Paid training, • Uniforms supplied, • Paid vacation, • Paid sick time, • 401K, • Health and dental insurance, • Perform regular maintenance services to customer vehicles., • Communicating effectively with Service Advisors., • Good knowledge of automobiles, • Effective analytical and communication skills, • Basic computer knowledge, • Ability to learn new technology, repair and service procedures, • Automotive mechanical experience preferred, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Positive, friendly attitude, • Willingness to train a must

Job DescriptionDescription: Job Description: We are seeking a skilled and motivated Flat Rate Technician to join our team. As a Flat Rate Technician, you will be responsible for diagnosing, repairing, and maintaining vehicles or equipment efficiently and effectively while meeting the standards set for flat rate compensation. You will play a key role in ensuring customer satisfaction by delivering high-quality work in a timely manner. Key Responsibilities: • Diagnose and repair vehicles or equipment based on customer complaints and service needs., • Complete repair orders and maintain accurate records of work performed., • Work efficiently to meet flat rate times and achieve maximum productivity., • Perform routine maintenance and repairs, including inspections, adjustments, and part replacements., • Provide exceptional customer service and communicate effectively with clients regarding their vehicles/equipment status., • Stay updated with the latest industry techniques, tools, and technologies to perform repairs., • Ensure compliance with safety regulations and company standards., • Proven experience as a Flat Rate Technician or in a similar technical role., • Certification(s) such as ASE (Automotive Service Excellence) is preferred., • Ability to work independently with minimal supervision., • Strong diagnostic skills and the ability to troubleshoot mechanical and electrical issues., • Excellent time management skills and ability to work under pressure., • A valid driver’s license with a clean driving record., • Competitive flat-rate pay based on the services performed., • Opportunities for bonuses and incentives based on performance.

Job Description Foundry Equipment Maintenance Technician 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 (non-negotiable) Job Type: Full-Time About the Opportunity: Join a leading manufacturing team at Eatons ES GEIS CHD division, where youll play a critical role in keeping automated foundry equipment running smoothly. This 2nd shift role is ideal for a skilled maintenance professional with strong electrical and mechanical capabilities looking for stability, great benefits, and relocation support within the U.S. What Youll Do: • Diagnose and repair electrical, hydraulic, pneumatic, and mechanical malfunctions on automated foundry equipment., • Perform sequence checks and machine diagnostics to resolve issues and ensure performance meets manufacturer standards., • Read and interpret shop orders, schematics, blueprints, and manuals., • Perform pipefitting and fluid system modifications for water, air, gas, oil, etc., • Operate forklifts as needed to support maintenance duties., • Generate and complete shop orders related to repairs and maintenance tasks., • Maintain a clean, safe, and organized work area., • Follow all safety procedures and compliance standards. What You Bring: • High school diploma or equivalent (required), • Minimum 3 years of industrial mechanical maintenance experience, • Strong knowledge of D.C. and A.C. electrical systems, • Understanding of pneumatic and hydraulic systems, plumbing, piping, and close-tolerance machine repair, • Ability to use measuring instruments and evaluate machine operation sequences, • Must be legally authorized to work in the U.S. without current or future sponsorship Preferred: • 5+ years of industrial maintenance or journeyman-level experience, • Forklift operation experience Whats Offered: • $72,508 annual base salary, • Full benefits package, • Relocation assistance (for the ideal candidate), • Interview travel reimbursement, • MondayFriday schedule (2:30 PM 11:00 PM) Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job DescriptionWhat you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic, • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisionsRequired (Basic) Qualifications:, • Must have a high school diploma or equivalent from an accredited institution, • Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading., • Authorized to work in the United States without Company sponsorship. Preferred qualifications:, • CNC Maintenance experience, • Background in machining and electrical equipment, • Two-year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics

Job DescriptionDirect Hire Maintenance Mechanic Shift: 6am until 2:30pmDays: Monday - FridayPay: DOE Job Summary and Duties Will be performing routine machine maintenance tasks by using standard procedures, tools, materials, machines and equipment.- Repairs and maintains machinery - Working to trouble shoot and repair motors, conveyors, pumps, belts, air conditioners and fans, ect. - keeping parts clean and lubricated, ordering parts, inspecting repairs. What's in it for you?- Direct Hire to company - Benefits- Great company to work for All interested candidates should reach out to Staffworks for immediate consideration . Please call 315-455-9675You can also apply to Staffworkscny.com.

Job Description Job Title: Maintenance Mechanic Reports To: Maintenance Foreman / Manager FLSA Status: Hourly, Non-Exempt Supervisor Responsibilities: No – Individual Contributor Position Summary: Under the direction of the Maintenance Foreman or Manager, the Maintenance Mechanic completes work orders and/or shift assignments for reactive and preventative maintenance on various items throughout the plant. Job Responsibilities: • Must be able to install, troubleshoot and repair complex equipment and systems, involving work of a varied nature with minimal supervision., • Ability to plan and perform all mechanical operations necessary to modify, dismantle, repair, overhaul and rebuild all types of complicated plant machinery, equipment and systems requiring a high degree of accuracy., • Install, repair, and maintain all plant equipment to required tolerances., • Perform the work of trades such as machinist or welder, plan lay out of complicated work., • Have working knowledge of hydraulics, pneumatics, mechanical applications and be able to read, write and analyze prints and sketches., • Adhere to all company safety policies including the use of proper PPE., • All other duties as assigned by the foreman / manager. Requirements: • Working knowledge of various mechanical applications with the ability to read, write and analyze prints and/or sketches., • Must have excellent trouble shooting skills., • Strong time management, multi-tasking, and prioritization skills. Qualifications: • 2 years' experience in a mechanically inclined position., • High School Diploma or GED required. Consideration given to candidates with experience in lieu of education., • Experience working in a unionized environment preferred., • Certificates from BOCES or MACNY are preferred. Job Type: Full-time – 8 Hour Shift. • 1st Shift - Monday through Friday, 6:00 AM - 2:30 PM., • Occasional Saturday overtime required. Salary: • Labor Grade 19-M: $28.03 – $30.82 / Hour., • Overtime after 8 hours in a day and after 40 hours in a week. Benefits: • 401(k) match up to 3% and available to enroll upon hire., • Medical, Dental and Vision insurance. Enrollment eligible the first of the month after hire., • Company provided Short and Long-term Disability, and supplemental Life Insurance., • Paid time off and holidays after 30 days of service, vacation time after 1 year., • Union membership.

Job Description Job Title: Maintenance Mechanic Reports To: Maintenance Foreman / Manager FLSA Status: Hourly, Non-Exempt Supervisor Responsibilities: No – Individual Contributor Position Summary: Under the direction of the Maintenance Foreman or Manager, the Maintenance Mechanic completes work orders and/or shift assignments for reactive and preventative maintenance on various items throughout the plant. Job Responsibilities: • Must be able to install, troubleshoot and repair complex equipment and systems, involving work of a varied nature with minimal supervision., • Ability to plan and perform all mechanical operations necessary to modify, dismantle, repair, overhaul and rebuild all types of complicated plant machinery, equipment and systems requiring a high degree of accuracy., • Install, repair, and maintain all plant equipment to required tolerances., • Perform the work of trades such as machinist or welder, plan lay out of complicated work., • Have working knowledge of hydraulics, pneumatics, mechanical applications and be able to read, write and analyze prints and sketches., • Adhere to all company safety policies including the use of proper PPE., • Working knowledge of various mechanical applications with the ability to read, write and analyze prints and/or sketches., • Must have excellent trouble shooting skills., • 2 years' experience in a mechanically inclined position., • High School Diploma or GED required. Consideration given to candidates with experience in lieu of education., • Experience working in a unionized environment preferred., • 3rd Shift: Sunday through Thursday, 10:00 PM – 6:30 AM., • Occasional Saturday overtime required. Salary: Labor Grade 19-M: $28.03– $30.82/ Hour. Benefits: • 401(k) match up to 3% and available to enroll upon hire., • Medical, Dental and Vision insurance. Enrollment eligible the first of the month after hire., • Company provided Short and Long-term Disability, and supplemental Life Insurance., • Paid time off and holidays after 30 days of service, vacation time after 1 year., • Union membership.

Job Description The Industrial Maintenance Technician plays a key role in ensuring the seamless operation of both equipment facilities and assisting with tracking inventory. This position requires a proactive, detail-oriented individual with strong technical skills and a commitment to maintaining safety and quality standards in a fast-paced environment. For the right candidate, this role sets the stage for future growth in senior maintenance and engineering roles within our company. Work hours are 11 a.m. to 9:30 p.m. Monday through Friday, with occasional overtime based on business needs. Key Responsibilities: Equipment Maintenance • Perform routine and preventive maintenance on manufacturing equipment, including conveyor systems, blenders, hoppers, augers, packaging machines, brewing kettles and other food production machinery. Assist in completing emergency/unscheduled repairs as required., • Troubleshoot, diagnose, and repair equipment issues to minimize downtime and optimize production efficiency., • Monitor equipment performance and identify opportunities for improvements or upgrades., • Conduct regular inspections of the facility to ensure optimal functioning of electrical systems, plumbing, HVAC units, and structural components., • Perform maintenance and repairs on building systems as needed., • Manage facility improvement projects, such as painting, flooring, or minor construction tasks., • Collaborate with external vendors for specialized repairs or upgrades when required. General • Promote and prioritize personal and team safety by adhering to company policies and procedures, and participating actively in safety initiatives and committees., • Ensure compliance with food safety regulations during maintenance procedures, including proper cleaning and sanitization of equipment and facilities., • 3+ years of experience in industrial maintenance, preferably in a food or pharmaceutical manufacturing environment., • High school diploma or equivalent; additional certifications or training in maintenance or engineering is a plus., • Strong knowledge of conveyors and bulk solids handling equipment., • Strong knowledge of electrical, mechanical, and plumbing systems., • Familiarity with personal safety protocols, including using PPE, maintaining a clean and safe work environment, and following OSHA requirements., • Familiarity with food safety and hygiene standards (HACCP, GMPs, etc.)., • Ability to read and interpret technical manuals, schematics, and blueprints., • Proficiency with tools and testing equipment used for maintenance and repairs., • Excellent problem-solving and time management skills., • Strong communication and teamwork abilities., • Experience with Limble computerized Maintenance Management System, • Experience with Redzone Software, • Understanding of food safety requirements such as HACCP (Hazard Analysis and Critical Control Points)., • Ability to troubleshoot PLCs, • Ability to analyze data and identify trends in maintenance activities, • Ability to train and coach others Competitive salary and benefits package offered, including health insurance and 401(k). Powered by JazzHR WyDmT6GFM2

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Responsible for performing breakdown and preventative maintenance on production and supporting equipment. $5,000 SIGN-ON BONUS Current Openings • Carry out tasks issued by maintenance shift supervisor., • Troubleshoot support system problems using basic problem solving skills., • Perform preventative maintenance tasks on equipment assigned to you., • Complete all standard work orders and preventative maintenance tasks assigned. Submit all completed paperwork., • Record information in required logbooks for systems history and continuous improvement., • Record any parts/components used for repairs to ensure replenishment of On-Hand balances are maintained, and properly dispose of used parts/components., • Ensure quality standards set by the company are adhered to after PM’s and/or repairs are made to equipment., • Perform machine repairs based upon a maintenance call or an assignment in a timely fashion., • Maintain cleanliness of the areas you are working in; properly dispose the parts/components you have replaced., • Promote a safe and harmonious work environment with adherence to company policy, procedures, safety and health regulations., • Maintain compliance with S.Q.F. Certification., • Minimum of a GED or High School Diploma Must be a minimum of 18 years of age • Technical training or electrical/mechanical technician degree, or verifiable comparable experience, • Food manufacturing background is a plus, • Must be able to operate forklifts and pallet jacks (electric/manual), • Experience with programmable logic controller, instruments and controls is preferred, • Knowledge of how your assigned equipment operates, • Basic knowledge & troubleshooting skills in mechanics. Experience with; plumbing, pumps, seals & gaskets, drive systems (gear, belt, and chain), bearings & bushings, fastener thread designations & properties of lubricants., • Basic knowledge & troubleshooting skills in pneumatics. Experience with; basic understanding of how pneumatics work, knowledge of the function and type of control components., • Basic knowledge & troubleshooting skills in hydraulics. Experience with; basic understanding of how hydraulics work, knowledge of the function and type of control components, read and understand basic hydraulic prints., • Knowledge of general computer functions such as Microsoft Office programs, spreadsheets, etc., • Knowledge of basic safety regulations, • Skill in multi-tasking, • Skill in basic problem solving, • Skill with basic math procedures, • Skill in team-building, • Skill in interpersonal and communication, • Possess good mechanical aptitude to disassemble and assemble all types of equipment, • Ability to communicate with co-workers, management team members, and other individuals in a courteous and professional manner, • Ability to climb ladders, stairs or use a scissor lift to inspect and/or repair equipment., • Ability to work in a fast paced environment, • Ability to pay close attention to detail and coordinate various activities simultaneously, • Seeing: Must be able to read reports and use computer, • Hearing: Must be able to hear well enough to communicate with coworkers, • Standing/Walking/Mobility: Must be able to stand to open files and operate office equipment or mechanical equipment; mobility between departments or physical locations, and attend meetings of coworkers and management, • Climbing/Stooping/Kneeling: Must be able to climb, stoop, or kneel to perform routine tasks within the scope of job, • Lifting up to 50 lbs./ Pulling/Pushing:, • Ability to perform functions in a fast paced environment., • Promote and lead by example a safety culture that drives safety as number one., • Able to work in a varied temperature environment., • Adheres to Company Policy and Procedures., • Maintain a flexible work schedule to provide program continuity and visibility., • Acts as a role model outside and within the Company., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Meets departmental productivity standards., • Provides guidance for coworkers as needed or as requested., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management and ability to prioritize workload. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Broad Function: Perform general maintenance duties to include routine installation, inspection, maintenance, and repair of electrical, mechanical, and plumbing systems, etc., to maintain the facility grounds and equipment, and building elements. MAJOR DUTIES AND RESPONSIBILITIES: • Perform semi-skilled tasks in a safe and efficient manner in accordance with current applicable Federal, State, and local standards, guidelines, and regulations, as well as the facility's established policies and procedures on a multitude of plumbing, electric Steam, air handling, refrigeration, and building., • Inspects electrical systems and equipment including lighting circuits and switches, making routine repairs, replacing fuses, cleaning panels, etc. as necessary., • Cleans and lubricates electric motors; small and major appliances, floor machines, carts etc. making repairs, as necessary., • Repairs or replaces cords and plugs on electrical equipment; removes, replaces, repairs, switches, wiring panels., • Cleans and/or replaces air conditioner filters., • Repairs, adjusts, and cleans ceiling vents, utility fans, exhaust fans, bearings and belts., • Cuts, threads, assemble, and seals pipes and fittings., • Replaces valve seats and packings., • Removes, repairs, adjusts, maintains defrost controls, condensers and coolers. Assist in initial installations of new equipment., • Actively participate in the preventative maintenance program. Assist in initial installations of new equipment., • Repairs, inspects plumbing valves, tub and shower connections, snakes kitchen floor and drains, kitchen sink and dishwasher., • Performs preventative maintenance on all equipment and areas as directed., • Weld machinery, as directed., • Paints walls, ceilings, curbs etc. as assigned., • Maintains, cleans, and inspects boilers, expansion joints, and insulation and vacuum breakers., • Report all unsafe/hazardous conditions, defective equipment, breakdowns, incidents/accidents, etc., to your supervisor immediately., • Assure that work areas and corridors etc. are clean and free of hazardous conditions and that tools, supplies, etc. are properly stored before leaving such areas on breaks, end of work day, etc., • Assure that maintenance schedules are followed as outlined for respective shift., • Grounds keeping including mowing, edging, trimming, snow removal and general clean up as directed., • Attends and participates in in-service programs, on-the-job training programs, seminars, workshops, etc., as directed., • Performs other similar or related duties. Monday-Friday Days, must be able to work every third weekend. PHYSICAL REQUIREMENTS: Ability to repetitively lift 25 — 50 lbs., push / pull up to 250 lbs., repetitively reaches above head, climb etc. MINIMUM QUALIFICATIONS: High school graduate or GED plus a minimum of two years’ experience in all trades. Possession of NYS Driver License in good standing.

Job DescriptionLifestyle Apartments Syracuse is Hiring Maintenance Technicians! The Maintenance Technician's primary duty is to perform repairs and conduct preventative maintenance throughout the apartment community. Schedule: Full Time; Monday-Friday 9a-6p; rotational on-call weekend shifts Job Type: Full-time Compensation: Starting at $21+/hour; commensurate with experience Benefits: PTO, Holiday Pay, Health Insurance after 60 days About you: • 3+ Years of Property Management Maintenance Experience, • General knowledge of plumbing, Electrical, HVAC, carpentry, appliance repair, • EPA Certified is a bonus, • Positive attitude with strong verbal communication skills: will work with a variety of staff, residents, and vendors, • Reliable Transportation, • Available for duty on a rotational basis for after-hours emergencyEducation & Experience, • Responds to all assigned maintenance work orders during the regular day, giving priority to any emergency, • Resolves all maintenance problems that arise during the work, • Reports to the Maintenance Supervisor or Property Manager any repair problems that cannot be fixed during the work, • Completes regularly scheduled maintenance activities as assigned by the Maintenance Director., • Performs general clean-up of the apartment community on an "overload", • Reports all acts of vandalism, destruction of property, and suspicious persons observed within the community to the Property Manager or other designated, • Is available for duty on a rotational basis for after-hours emergency, • Assists in maintaining all electrical, plumbing, appliances, and mechanical, • Follows dress code policy, including selection of outfits from the designated corporate clothing catalog. Maintains a clean, neat, professional appearance at all, • Keeps shop and storage areas in neat and well-organized, • Provides high-quality customer service when interacting with, • Completes grounds work as directed by supervisor, which may include picking up trash, sweeping curb and dumpster areas, and maintaining landscaping beds and other, • Assists in monitoring all work being performed by outside contractors., • Monitors and maintains all building systems as, • Assures safety standards are used which comply with all company, local, City, State, and Federal, • Ensures compliance of all work-related activities in a fair, ethical, and consistent, • Other duties as assigned, • Ability to lift up to 50lbs, • Ability to climb multiple flights of stairs and walk the property UhF5ps3lzH

Job Description Title: Service Engineer Apprentice Reports to: Service Manager, (Assigned Technical Center) Location: DMG MORI USA, Technical Center Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 75% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Essential Job Functions: Service Apprentice will participate in training and development where the incumbent learns to repair, install and move all DMG MORI machines. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Complete all Classroom, factory training and online classes, and pass with 80% or higher scores., • Shadow Service Engineers on service calls, which require traveling with the Service Engineer to customer sites, • Learning through observation, while assisting Service Engineers on the call., • Progression in the apprentice program is competency based, participants are generally enrolled for 2 to 3 years before they receive certification and promotion to Service Engineer., • High School diploma or GED., • Recent mechatronics program graduate or related field experience preferred., • Demonstrated mechanical, pneumatic, hydraulic, electrical, or electronic, aptitude., • Experience in CNC manufacturing, maintenance, a related field, a journeyman certificate and/or extensive experience (5+Years) in machine/manufacturing maintenance or related field - such as military maintenance training and experience preferred., • Analytical/problem solving abilities to define, troubleshoot, and repair a machine without assistance, • High interpersonal and social skills required to successfully complete assignments in stressful situations, • Ability to communicate professionally and create positive relationships with customers, • Verbal skills to effectively communicate varying levels of internal technical staff and customers, • Time management skills to plan work and travel schedules to minimize downtime/nonproductive time, • Adaptability to abrupt changes in work schedule and travel arrangements, • Proven written skills and discipline to complete required Technical documents and Reports in a timely fashion., • Ability to travel domestic and/or internationally to visit customer locations and/or trade shows, • Ability to follow complex written and verbal instructions correctly., • Other duties as assigned. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Powerhouse Maintenance Technician Location: Syracuse, NY Industry: Manufacturing & Industrial Maintenance Job Category: Facilities & Equipment Maintenance Compensation Range: $70,761 annually ($34.02/hour) Job Type: Full-Time About the Opportunity: Join a mission-critical team at a manufacturing facility in Syracuse where your work directly supports safe and efficient operations. This is a hands-on role for a skilled technician with powerhouse experiencefocused on maintaining high-pressure systems and vital infrastructure. Ideal for candidates local to the area with a mechanical mindset and a background in steam boiler operations. What Youll Do: • Install, maintain, and repair steam boilers, air compressors, and power generation equipment, • Perform chemical testing to maintain proper boiler water quality, • Troubleshoot and repair analog and digital control systems, • Tear down, rebuild, and reassemble mechanical and electrical units, • Read and work from mechanical, electrical, and plumbing schematics, • Fit and install pipes for systems carrying steam, water, oil, gas, and compressed air, • Maintain high-pressure steam systems across the facility, • Input and manage scheduling within the facilitys energy management system What You Bring: • Minimum 3 years of Powerhouse Technician experience, • Experience with steam boilers, air compressors, and automatic boiler controls, • Proficiency with schematics, blueprints, and troubleshooting systems, • Must reside within 50 miles of Syracuse, NY, • Must be authorized to work in the U.S. without sponsorship, • Manufacturing or industrial plant experience preferred, • Strong mechanical aptitude and critical thinking skills Whats Offered: • $70,761 annual salary (paid hourly at $34.02), • 401(k) with company contributions, • Medical, Dental, and Vision Insurance (effective Day 1), • Paid vacation and holidays, • Employee Assistance Program (EAP) Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job DescriptionWe are currently seeking 2 Maintenance Repair Technicians (CNC) - 2nd Shift. This position is based at our client Syracuse, New York facility with core hours of 2:30pm to 11:00pm.& & The hourly rate for this position is $34.86 per hour.& & Must have three years of manufacturing maintenance or related degree and one year Must have experience with ladder logic circuit diagrams Must have experience with CNC maintenance& What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic, • Adjust equipment to required specification and check to assure effective operation.&, • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations.&, • Work from complex schematic diagrams, manuals and testing procedures.&, • Troubleshoot all defective printed circuit assembly boards.&, • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision.&, • Use of judgment to comply with instructions or prescribed routines and to make decisionsRequired (Basic) Qualifications:, • Must have a high school diploma or equivalent from an accredited institution, • Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading., • Authorized to work in the United States without Company sponsorship.& Preferred qualifications:&, • CNC Maintenance experience, • Background in machining and electrical equipment, • Two-year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics&

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - East Syracuse, NY If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England including East Syracuse, NY. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Service vehicle with gas card (once trained and independent), • Cell phone allowance, • Extensive technical training & professional development opportunities, • Health Insurance, • 401K, • Vacation and paid sick time, • Compensation commensurate with experience, • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • This role requires ability to pass a pre-hire drug test, pre-hire background check and completion of an I-9 form., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service Inc. is a proud drug-free workplace.