Trabajos maintenance engineer en Freeport, New YorkCrear alertas

Job Description We are looking for a Project Engineer for our Westbury, NY facility. In this role, under limited guidance, supports the R&D organization by researching, evaluating, selecting and applying standard engineering techniques, procedures and criteria in testing and solving technical problems pertaining to thermal spray application development, system acceptance tests, and product validation projects. Your Responsibilities: • Formulates and executes project plans within the Coating Solution Center (CSC) under limited guidance from Sr. Project Engineers., • Leads individual project activities for PVD/thermal spray application and parameter development, product support and validation (system acceptance tests). Additional support required for key account managers, materials and equipment business lines., • Ensure project assignments meet established technical requirements, budget, and time schedules. This includes guidance in the use of equipment and materials used in the spray process, testing for coating properties, and product evaluation., • Oversees the maintenance and organization of spray test results and documentation., • Keeps stakeholders informed of the status of assigned projects maintaining direct contact with Oerlikon Metco sales, materials and equipment business lines., • Generates project proposal activities including quotations, scheduling, and specifying the required project tasks and goals; inclusive of designing test plans and performing thermal spray processing. Required to prepare technical reports and/or presentations for review., • Evaluates metallurgical coating samples and reports for design intent; assessing coating specifications and if requirements were achieved., • Maintains strict adherence to Oerlikon Metco internal procedures and safety regulations pertaining to thermal spraying and coating evaluation., • Position may require travel to support CSC activities including on-site knowledge transfers, customer service issues, thermal spray system support and acceptance tests., • Guides thermal spray operators within the CSC and supports knowledge transfers to various departments within Oerlikon Metco., • Performs other duties as required. Your Profile: • Bachelor's degree in materials science or mechanical engineering, • 3 years job experience in thermal spray or PVD coating technologies, • Master's degrees preferred, • Excellent written and verbal communications skills, • Highly developed quantitative analysis and problem-solving skills, • Comprehensive and current knowledge of coating technologies and techniques, • Strong business acumen and ability to apply engineering science, • Must be proficient in using business and communications software (preferably Word, Excel, PowerPoint, common Windows operating systems, and Outlook), • Ability to travel 30% travel may be required We offer: Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! The perks and benefits of working at Oerlikon include the following: • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong., • Excellent Dental and Vision coverage., • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey., • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!, • Generous paid time off to support your physical and mental wellbeing., • 12 paid company holidays to occasionally extend your weekends or time off., • Flexible hours or remote work environment available for certain positions, • 100% company paid life insurance and disability insurance, • Employee Referral Bonus program because why not to bring your friends to work everyday! Why Oerlikon: Imagine pursuing R&D breakthroughs in collaboration with a workforce that numbers more than 11.000, across more than 80 nationalities sitting in over 170 locations and 30 countries worldwide. We count this spectrum of cultures, viewpoints and insights as an asset in delivering the solutions our customers need and the careers our team members seek. Our people are diverse in their perspectives but united in their purpose: to develop technologies that reduce resource and energy consumption and help build a healthier, more sustainable and better protected world. #joinoerlikonus #joinourteam Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $75,000 to $100,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Tuition reimbursement, • Vision insurance Work Location: In person

Field Service Engineer - Spectrometers & Chromatographs - North Hempstead, NY Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers . Repair, maintain, troubleshoot, install, and calibrate High Performance Liquid Chromatographs, Gas Chromatography Mass Spectrometers, Liquid Chromatography Mass Spectrometers, Atomic Absorption Spectrometers, and similar analytical instrumentation. • Conduct pre-commissioning activities including system checkout, instrumentation calibration, loop checks, and communication testing. • Operate test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions. • Perform preventative maintenance. • Serve as voice of customer and liaise feedback to product development teams. • Maintain tool and parts inventory. • Escalate complex issues to senior Service Engineers. High growth potential opportunity comes with a competitive compensation package, full medical and disability benefits, bonuses, commissions, 401(k) savings plan, paid training, generous paid time off, company vehicle, and more! For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: http://dmc9.com/cam/app.asp Or email to: 100007113010007349@najbcareers303.com Please reference #44708NY201 when responding. Diedre Moire Corporation Education Requirements: Associate Degree Minimum Experience Requirements: 2-5 years Job City Location: North Hempstead Job State Location: NY Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #fieldservicejobs #technicianjobs #LabTechnicianJobs #MetrologistJobs #CalibrationTech DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to pleaseremove@candseek4.com Or, visit the website at www.jobbankremove.com. If you have further concern regarding email received from us, call (609) 584-5499.

Work Location: Baldwin County, New York Summary: The QMS Supervisor is responsible for overseeing the development, implementation, and ongoing maintenance of the Quality Management System (QMS) to ensure compliance with relevant industry standards and regulations. This role focuses on driving continuous improvement, managing audits, leading CAPA processes, and providing training to promote a culture of quality throughout the organization. Responsibilities: • Oversee the structure and maintenance of the QMS, ensuring all documentation and procedures comply with regulatory standards and organizational objectives., • Lead and coordinate internal and external audits, manage audit responses, and verify the effectiveness of corrective actions., • Conduct root cause analysis for non-conformances and customer complaints, implementing effective CAPA solutions., • Drive continuous improvement initiatives using lean methodologies, statistical process control, and data analysis to optimize efficiency., • Manage electronic QMS platforms and ensure document control processes are accurate, current, and compliant., • Align all quality programs and initiatives across the organization to maintain consistent standards., • Monitor compliance with customer and regulatory quality requirements, ensuring standards are met or exceeded., • Develop and report key QMS performance metrics to senior management, providing actionable insights for decision-making. Qualifications: • Minimum 5 years of experience in a leadership role within Quality Management Systems or Quality Assurance, preferably in the medical device industry., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field; Master’s degree may substitute for 1 year of experience., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Experience with root cause analysis tools, FMEA, SPC, and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma certification (Black Belt or Green Belt) preferred., • Excellent written and verbal communication skills for interfacing with customers and regulators., • Proven ability to lead and influence cross-functional teams and mentor others., • Strong analytical and problem-solving skills, with the ability to implement sustainable solutions., • High attention to detail in document review and compliance assessment., • Ability to work independently and collaboratively in a team environment., • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE) preferred., • Experience in highly regulated industries such as medical device or pharmaceutical sectors preferred., • Experience with document control administration preferred. Published Category: Quality & Validation

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionMust be US citizen or Green Card Holder and Local NY/NJ. Job Summary: The position is responsible for driving Implementation and supporting projects and other Network Engineers in their day-to-day operational activities as each person will bring their unique skill sets with them to the organization. This position is a direct report to the Technology Group Product Manager with understanding of business goals, business processes, and technology expertise in these areas. This position is responsible for configuring, testing, implementing and supporting software, hardware and systems. This position work closely with Sr. Network Engineers and Architects that drive the analysis and physical design of technical solutions. Implementation involves creating new technology based solutions whereas support involves upgrades, maintenance or issue resolution to existing technology solutions. Job Responsibilities: • Provide network implementation and consulting for data and converged communications infrastructure based largely on Cisco equipment., • While performing this role the candidate will be responsible for., • Perform network-engineering tasks such as assessing and implementing firewall rules, establishing VPNs with partner companies, routing & switching and implementing access control lists, evaluating and installing software upgrades on network and security equipment., • Engage Operations and IT Product teams to analyze security risks, propose mitigations and support network improvement projects., • Collaborate (including staff, vendors, and consultants) to identify and resolve complex, client application and hardware problems impacting availability and performance of the systems ., • Knowledge and ability to perform the roles of Network Engineer routing and switching., • After hours, call-out is required in the performance of the duties and responsibilities of this position. Job Specific Qualifications: Required Qualifications: • Bachelor’s degree., • 6 years of experience in IT networking, with at least three years experience in doing some of the following: designing, implementing, operating & managing multiple network projects and or large-scale IT systems., • Diverse experience in network/systems/security design and implementation of data network infrastructure based on security frameworks like NIST and CIS., • Demonstrated experience creating and maintaining various Secure LAN/WAN, Zero-Trust technologies and tools., • In-depth knowledge of Cisco IOS, Next-Gen firewalls , IPS/IDS, Virtual Private Networks (VPNs), Web Application Firewalls, F5 load balancers, and other network security technologies that may emerge over time., • Working knowledge of Network Security management and monitoring tools (e.g., FireMon, SolarWinds, Firepower Monitoring Center (FMC), etc.), Cisco ISE and commands to ensure quick and efficient resolution of issues., • Demonstrated ability to work independently and multi-task effectively with strong analytical ability, problemsolving skills, and attention to detail., • Demonstrated effective verbal and written communication and facilitation skills; demonstrated ability to develop business cases and sell network investment concepts and foster working relationships with key stakeholders., • Demonstrated experience defining metrics that measure success of the technology solution in addressing business and technical requirements as well as achieving the desired outcomes., • Exposure to Cybersecurity concepts and best practices. Desired Qualifications: • Cisco certifications – Cisco Certified Network Associate (CCNA) Route/Switch, Network +., • Excellent analytical and problem-solving ability., • Understanding of general IT standards, policies, best practices, guidelines, processes., • Minimum Years of Experience 2 years of experience., • Education Bachelor’s.

Job Description We are seeking a Maintenance Manager to become a part of our team! You will perform necessary work to keep machines, mechanical equipment, and structure of an establishment in repair. Responsibilities: • Oversee daily maintenance activities at the Mineola, NY facility, • Oversee daily operations of the maintenance department including: power usage, electrical usage, air conditioning usage, etc., • Coordinate with other facilities departments to ensure that all facilities are in a safe and compliant state., • Inspect equipment on a regular basis to ensure it is in good working order, • Ensure that all safety regulations are being followed at the Mineola, NY facility, • Perform regular maintenance on equipment at the Mineola, NY facility to ensure it is in good working order, • Oversee the safety of all employees when working at the facility. Qualifications: • Bachelors Degree or equivalent training, • Ability to drive low motor and man lifts, • Manage a yearly P&L for labor and materials., • Conduct regular maintenance employee safety talks and training sessions., • Knowledge of maintenance, troubleshooting and repair of facility mechanical/electrical systems including steam, heating, ventilation, chilling, cooling, compressed air, water supply, electrical service/distribution/control, electronic controls, plating equipment, facility and structural systems., • Ability to read, understand and follow instructions as well as follow safety procedures., • Ability to work with hands and tools including electrical, pneumatic, hydraulic and other components., • Ability to follow specific job specifications including but not limited to specific tasks to be performed and completing them., • Deadline and detail-oriented, • Must have clean NYS drivers licenseCompany DescriptionWant to come join an established that has been around for 97 years? A Successful, long standing company who services many sectors, such as aerospace, military, automotive, space, medical, machining, restoration and so much more. With over 30 different finishes and services such as nond-destructive testing, painting, anodize, electroplating, polishing, sateening, grinding and more. There are endless opportunities to grow and excel within the company. Nassau Chrome offers long standing careers to employees who want to be a team player, and take pride in their work. Everyday is a new challenge, a new job and different work – not mundane or repetitive.Want to come join an established that has been around for 97 years? A Successful, long standing company who services many sectors, such as aerospace, military, automotive, space, medical, machining, restoration and so much more. With over 30 different finishes and services such as nond-destructive testing, painting, anodize, electroplating, polishing, sateening, grinding and more. There are endless opportunities to grow and excel within the company. Nassau Chrome offers long standing careers to employees who want to be a team player, and take pride in their work. Everyday is a new challenge, a new job and different work – not mundane or repetitive.

Job Description Job Title: Machine Maintenance Engineer Manager 1st Shift Location: Garden City, NY, US, 11530 Position Summary: The Machine Maintenance Engineer Manager ensures safety is the top priority while supporting Production needs. This hands-on role oversees the installation, repair, and upkeep of facilities, equipment, and offices. The ideal candidate has detailed knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) and excels at designing maintenance procedures, tracking budgets, performing inspections, and executing repairs. Supervisory Responsibilities: • Supervise and mentor employees in the maintenance department., • Train team members in equipment maintenance, safety procedures, and operational efficiency.Duties and Responsibilities:, • Maintain a safe and compliant work environment while meeting production needs., • Work independently or collaboratively with the team to complete tasks efficiently., • Perform routine inspections and maintenance across the production floor., • Monitor, troubleshoot, and repair production and process equipment., • Coordinate with contractors to obtain repair information, parts, and procedures., • Design and implement maintenance procedures; track budgets and expenses., • Facilitate property insurance audits and implement corrective actions as needed., • Negotiate contracts with external vendors for maintenance services., • Ensure operational efficiency of electrical, mechanical, and HVAC systems., • Maintain company facilities in a clean and hygienic condition., • Perform other duties and assignments as required.Required Skills and Abilities: Machine & Equipment Repair: • Maintain, troubleshoot, disassemble, and repair production equipment safely., • Perform alignments, lubrication, coolant changes, and other routine machine maintenance., • Demonstrate versatility across multiple systems and trades.Electrical, HVAC, & Plumbing:, • Basic knowledge of electrical systems (DC and AC, 24V–480V)., • Ability to read, interpret, and modify electrical schematics and prints., • Experience with ladder logic, PLCs, VFDs, and instrumentation/control devices., • Familiarity with gas/oil heating systems, air handlers, condensers, and evaporators.Safety:, • Promote and enforce a safety-first culture on the production floor., • Knowledge of Lockout/Tagout, Arc Flash, Machine Guarding, HazCom, DOT, RCRA, and material handling.Leadership:, • Strong problem-solving, analytical, and decision-making skills., • Ability to manage multiple priorities in a fast-paced environment., • Demonstrated success leading, motivating, and coaching diverse teams., • Excellent written and verbal communication; able to interact effectively at all levels.Education and Experience:, • Bachelor’s degree required., • 5–10 years of experience in manufacturing maintenance or equivalent training., • Background in general maintenance of manufacturing machines and process equipment (automated systems, chillers, air compressors, hydraulics, pneumatics)., • Proficiency with hand and power tools., • Experience with MS Office preferred.Physical Requirements:, • Ability to lift 50 lbs., • Active role requiring standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some tasks. Pay Details: $120,000.00 to $140,000.00 per year Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

The Field Service Engineer provides field service engineering and technical assistance to customers in areas of installation, startup, maintenance & repair, training, and modification of equipment. This role is based out of Dallas, TX with 70% travel. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000- $120,000 annually and offers a competitive benefits package. #LI-KR Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Performing installation and commissioning of power quality and energy meters at customer sites, ensuring that it functions correctly and meets the operational standards specified., • Performing routine maintenance and diagnosing problems with equipment. Assist in repairing or replacing faulty parts and ensuring that the equipment is operational again in a timely manner., • Providing remote & on-site technical support to customers, troubleshooting issues as they arise, and resolving them directly or advising them on the necessary steps to fix them., • Training customers in the use of EIG equipment safely and effectively, often providing hands-on training and detailed operational manuals., • B.S. in Electrical Engineering, or Diploma in Electrical Engineering (required), • Minimum three years of relevant experience (required), • Good understanding of industry standard communication protocols with an emphasis on Modbus, IEC 61850, DNP and BACnet., • Knowledge of software, integration and automation, industrial controls, PLCs, and industry SCADA practices is an asset., • Strong understanding of the power systems, metering applications industry practices and electrical equipment being serviced., • Excellent analytical skills to diagnose issues and determine the best way to fix them., • Ability to communicate effectively with customers, explaining complex technical issues in a way that non-experts can understand. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Title: Engineering Supervisor I (NS). Apply professional engineering skills to solve difficult highway projects and maintenance problems. Qualifications Bachelor’s degree in an applicable field of engineering from an accredited institution and two (2) years of progressively responsible experience;

Marchon's client is hiring an NOC (network operation center) Engineer to help oversee their telecommunication networks and computer systems. In this role, you will be responsible for monitoring the performance and capacity of our computer systems, troubleshooting problems, and responding to network issues. You may also be required to configure system hardware and manage system back-ups. 100% ONSITE role A successful applicant should demonstrate advanced knowledge of network deployment and infrastructure and excellent troubleshooting skills. A skilled NOC Engineer will be able to diagnose and resolve network issues without causing extended downtime of the IT systems. Must be willing to work flexible hours. This is on-site positions, applicants must be fully vaccinated and agree to wear a mask while onsite. Responsibilities include: • Design, configure, implement and troubleshoot LAN based backup, email, FAX and virus solutions along with their respective agents in a multi-platform environment., • Maintains complex information technology computer networks and their operating systems, • Configure and troubleshoot servers for routing and bridging functions., • Implements the design of systems for computer networks; advises in the placement of workstations as well as network hardware., • Installs, configures, and supports network operating systems., • Implement hardware/software-based NOS fault tolerant solutions (load balancing, clustering and storage)., • Configure connectors in a multi-platform environment., • Install, configure and troubleshoot FTP, HTTP and IIS services., • Install, configure and troubleshoot remote access services on the network., • Install, configure and administer LAN management applications., • Install, configure and troubleshoot switching, VLAN, router and firewall based technologies. (LAN based)., • Survey, design, install, configure, and troubleshoot wireless network LAN technology., • Read, interpret, and act upon logs from network applications for security purposes., • Maintaining system data backup and restoration procedures., • Maintain internal intranet and external extranet web sites., • Configuring and troubleshooting hardware components including servers and network equipment., • Installation, upgrading and updating of server applications., • Providing hardware and software evaluation to clients., • Meet with the technical staff to review all technical designs., • Troubleshoot telecommunications and network equipment problems., • Monitor system and network security., • Provide Wide-Area Network (WAN) support and troubleshooting., • Install, configure and troubleshoot O365 including Microsoft Intune., • Navigates and/or maintains various systems and databases for miscellaneous job-related duties as assigned and assists in the preparation and ongoing maintenance of all supporting documentation, • Ability to work with Microsoft Azure cloud

Location: Garden City, NY, US, 11530 Business Unit: Treitler FMH Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Provide technical support to the production of sheet metal/foil, brazing, welding, assembly and test of highly complex heat exchangers., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes., • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing., • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation., • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure., • Highly technical and analytical skills such (drawings, schematics, layout)., • Able to think out of box., • Project management skills., • Highly organized and efficient., • Possess leadership and interpersonal skills., • Strong problem-solving skills. Education and Experience: • Bachelor's degree in Industrial Engineering., • 3-5 years of progressive experience in manufacturing engineering., • Hands-on foil expert, experience in sheet metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Medical Device, Nuclear, Automotive or other similar industries., • Due to ITAR Restrictions, an export license may be required., • Other: Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder. Compensation: Employee Type: Salaried Currency: USD Salary Minimum: 120,000 Salary Maximum: 130,000 Incentive: No

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Emsar, headquartered in Wilmington, Ohio, is hiring a Field Service Engineer for its Levittown, NY location. This full-time position focuses on preventive maintenance and repair of various medical devices, such as hospital beds and exam tables.

Skilled Engineer job at Arriva Rail London. As a PSV Engineer, your role would involve carrying out planned and preventative maintenance along with diagnostic fault finding and reactive repairs to a fleet of commercially operated buses & coaches, to the strict standards set by both Arriva, and the D