Trabajos maintenance engineer en Tampa, FloridaCrear alertas

Additional InformationHVAC Knowledge, Plumbing, Electrical, Drywall Job Number25155254 Job CategoryEngineering & Facilities LocationTampa Marriott Water Street, 505 Water Street, Tampa, Florida, United States, 33602___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationHVAC Knowledge, Plumbing, Electrical, Drywall Job Number25155254 Job CategoryEngineering & Facilities LocationTampa Marriott Water Street, 505 Water Street, Tampa, Florida, United States, 33602___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationHVAC Knowledge, Plumbing, Electrical, Drywall Job Number25155254 Job CategoryEngineering & Facilities LocationTampa Marriott Water Street, 505 Water Street, Tampa, Florida, United States, 33602___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationHVAC Knowledge, Plumbing, Electrical, Drywall Job Number25155254 Job CategoryEngineering & Facilities LocationTampa Marriott Water Street, 505 Water Street, Tampa, Florida, United States, 33602___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job Description The Chief Engineer leads the Engineering team and oversees all building maintenance, repair, and operations to ensure a high level of tenant satisfaction, safety, and building efficiency. Essential Duties and Responsibilities: • Manage all aspects of building maintenance, including HVAC, electrical, and plumbing systems., • Monitor building energy usage and ensure efficient operations., • Oversee contractor work and manage tenant improvement projects., • Prepare budgets; control inventory and purchasing., • Supervise, train, and evaluate Engineering staff; develop and implement performance goals and staff development plans., • Collaborate with tenants, contractors, and property managers to ensure reliable building operations and address tenant issues., • As assigned, work with vendors to identify scopes of work and oversee compliance with contract terms and quality control., • Conduct thorough inspections to ensure systems are operating efficiently; maintain detailed documentation and service logs for building equipment; maintain compliance logs., • Follow company safety protocols and wear appropriate PPE; enforce compliance with OSHA, NEC, NFC, NFPA regulations; manage safety protocols, including the lockout/tagout program; report safety hazards; participate in safety inspections; ensure all staff members follow safety protocols and comply with building codes and regulations; oversee safety training., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • HS Diploma or GED required, • At least ten years of industry-related experience or commensurate certification/trade experience, • At least five years of supervisory, training, and mentoring experience including developing and delivering performance appraisals and disciplinary action, • CFC Certification preferred or willingness to obtain as requested; possess engineering and trade licenses required according to local, state, or national requirements, • In-depth knowledge of Microsoft Office products, energy management software systems, CMMS, and other building operational platforms, • Ability to travel daily to assigned properties as necessary, • Ability to demonstrate advanced knowledge of HVAC, BAS, fire protection, and life safety systems, • Strong troubleshooting, capital budgeting, and energy management skills/practices, • Strong contract administration and project management skills, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to act as the primary point of contact/first responder for building emergencies, ensuring the proper amount of coverage; ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for over 105 years and we are known for our quality work and quality employees. This is your chance to join our dynamic team and help us to design the critical infrastructure that improves our world! We have immediate openings for a Highway Engineer for both our Tampa, FL office. We are a rapidly growing company with a strong industry reputation and an expanding presence in the Florida market. Core responsibilities include roadway design and plans production for highway projects, including but not limited to horizontal and vertical alignments, roadside evaluation and design, maintenance of traffic design, utility coordination, specifications, cost estimates, and development of technical reports. Our highway contracts range from small-scale intersection improvements to complex interchanges and new corridor designs to statewide and districtwide continuing services contracts. We also provide a full range of design-build and owner’s representative services. Requirements: • A minimum of 4 years of experience in highway design, • Bachelor’s Degree in Civil Engineering., • P.E., registered in the state of Florida or ability to obtain within 6 months, • Strong knowledge of FDOT standards, specifications, policies, and procedures, • Experience designing roadway projects and preparing contract documents in accordance with FDOT policies and procedures; experience with other state and local agencies in the Southeast and Mid-Atlantic a plus, • Experience with design software tools such as MicroStation, Geopak, InRoads, OpenRoads and AutoCAD, • 3D design experience a plus, • Experience with Alternative Delivery projects (Design-Build, P3, etc.) a plus, • Ability to effectively communicate orally/written at all levels of the organization, • Ability to travel to project sites, company offices and client meetings, • Positive attitude and willingness to work cooperatively with others, • Willingness to continue to learn and grow technically and professionally within the company WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Position # 2145 #LI - Onsite #LI - Mid Level

Job DescriptionWe are looking for a skilled IT Storage Engineer to join our team in Tampa, Florida. In this Contract-to-Permanent role, you will play a critical part in designing, implementing, and maintaining advanced storage solutions within a Linux-based environment. This position requires hands-on expertise in storage technologies and scripting, ensuring seamless integration and optimal performance of storage infrastructure. Responsibilities: • Design, implement, and manage Linux-based storage systems to meet performance and scalability requirements., • Optimize storage solutions for capacity, reliability, and availability., • Configure and maintain file systems such as ext4, Btrfs, and other advanced technologies., • Administer storage protocols and technologies, including iSCSI and distributed storage., • Monitor, troubleshoot, and resolve storage-related issues to minimize downtime., • Collaborate with cross-functional teams to integrate storage solutions with overall infrastructure., • Automate storage provisioning and maintenance tasks using scripting languages like Bash and Python., • Ensure data security and compliance with industry standards, including encryption and access controls., • Perform capacity planning and conduct performance tuning for storage systems., • Keep up-to-date with emerging storage technologies and recommend enhancements to existing systems.• Bachelor’s degree in Computer Science, Information Technology, or a related field, or equivalent experience., • At least 5 years of experience in Linux system administration with a focus on storage solutions., • In-depth knowledge of Linux storage technologies, including Samba, iSCSI, and distributed systems., • Proficiency in managing file systems such as ext4, Btrfs, and others., • Hands-on experience with enterprise storage systems such as NetApp, Ceph, or GlusterFS., • Strong scripting skills in Bash, Python, or similar languages for automation tasks., • Familiarity with virtualization and containerization tools like VMware, Docker, or Kubernetes., • Understanding of backup and disaster recovery solutions, as well as storage networking protocols.

Job Description The Building Engineer I is responsible for maintaining, operating, and troubleshooting building systems, including HVAC, plumbing, and electrical systems, focusing on performing routine maintenance tasks, responding to tenant requests, and ensuring systems operate safely under the guidance of senior engineers. Essential Duties and Responsibilities: • Perform scheduled maintenance, repairs, and inspections of building systems; address service requests, including hot/cold calls, plumbing issues, and lighting repairs., • Troubleshoot minor equipment malfunctions and escalate issues as needed., • Replace light fixtures, filters, and other components as required., • Maintain accurate records of inspections and equipment performance., • Interact with tenants, contractors, and property managers and work closely with senior engineers and technicians to support smooth building operations and resolve tenant issues., • Assist with preventive maintenance tasks and contractor oversight., • Conduct property inspections to identify deficiencies., • Record equipment readings and ensure assigned building systems are operating according to standards., • Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, NFPA regulations; report safety hazards; participate in safety inspections., • Provide guidance to junior Technicians when needed., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Work closely with senior engineers to develop technical skills and participate in professional development programs to grow into advanced roles., • HS Diploma or GED required, • Two to three years of job related experience or commensurate certification/trade experience, • CFC Certification preferred or willingness to obtain as requested; possess engineering and trade licenses required according to local, state, or national requirements, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Familiar with fire/life safety equipment/procedures, • Proven track record for delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and to write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies. Company DescriptionAbout Lincoln Property Company Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: Lincoln Property Company\r\n Lincoln Property Company (“Lincoln”) is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-used properties, throughout the United States, United Kingdom, and Europe. Lincoln’s combined management and leasing portfolio on behalf of institutional clients includes more than 510 million square feet of commercial space. In addition to providing third-party real estate services, Lincoln has completed over 150 million square feet of development since its inception in 1965 and has another $20 billion currently under construction or in the pipeline. For more information, visit: .

Job DescriptionSalary: Agile IT Synergy, LLCis a Subject Matter Expert (SME) based information technology company focused on innovative engineering and integration of relevant technologies combined with effective business practices to deliver complete solutions that meets customer mission needs.Our proven ability to deliver against mission priorities ranging from organizational process improvements to the execution of mission-critical technical solutions is why we are trusted by critical government agencies.We're in search of customer focused individuals with a passion for solving difficult problems and exceeding expectations. JOB DESCRIPTION: The Senior Software Engineer will ensure that our government customer achieves the desired 3rd party software infrastructure, capabilities, and accreditation process for the deployment of software at the speed of relevance. The Senior Software Engineer performing on this contract will possess the required skills, experience and accreditations at the appropriate clearance level and be responsible for executing collaborative autonomy and interoperability architecture and software to maximize the capabilities of uncrewed systems (UxS) to enhance command and control, communications, computing, cyber, intelligence, surveillance, reconnaissance (C5ISR), and targeting. RESPONSIBILITIES: The Software Engineer is responsible for the design, development, maintenance, and sustainment of collaborative autonomous software and the implementation of software technical standards and processes to ensure cross platform interoperability. Specific responsibilities include: • Supporting the Unmanned Systems Autonomy and Interoperability (UxSAI) Chief Engineer to ensure collaborative autonomy software meets stakeholder functional and quality attribute requirements, use cases, and workflows for autonomous systems and collaborative autonomy., • Evaluate and assess systems software architectures to identify gaps, problems, and issues impacting the execution of collaborative autonomous system missions., • Advise leadership on software engineering processes, best practices, standards, and technologies to ensure proper function of autonomous systems and enable seamless interoperability and cooperation between systems and components., • Work with multi-disciplinary engineering teams to design distributed autonomous software systems spanning heterogeneous subsystems and platforms across land, air, and maritime environments., • Document complex software systems architectures and detailed designs., • Evaluate commercial and open-source software technologies and frameworks for use in autonomous systems design, development, and test., • Support the development and implementation of a machine learning operations (MLOPS) pipeline for collaborative autonomy software., • Support the development and implementation of an autonomy software pipeline that utilizes a digital engineering environment for development, test, evaluation, and over-the-air deployment., • Plan and coordinate software system test strategies to assess and verify the systems fitness for purpose (functional operation, performance, operational effectiveness)., • Provide systems engineering support to the program for collaborative autonomous systems. EDUCATION: • Bachelor's degree in Computer Engineering, Information Technology or other related field of study., • Relevant experience and years of service may be considered in lieu of required education. MINIMUM POSITION QUALIFICATIONS: This position requires a bachelors degree in software engineering or a related field and at least six years of systems engineering experience. Specific qualifications include: • Experience designing and developing software utilizing a modular and open systems architecture., • Experience designing and developing software architectures for performance, availability, modifiability, security, testability, usability, scalability, portability, interoperability, maintainability, integrity, reliability, and safety., • Full-stack software engineering experience designing, developing, testing, deploying, and maintaining a broad range of software applications in embedded, mobile, and enterprise domains., • Proficiency developing software applications in embedded, mobile, and enterprise domains using modern programming languages (e g. C/C++, Java, Python)., • Experience with configuring, tuning, developing drivers, and applications for computer operating systems., • Experience with computer hardware and operating systems internals to include: kernel level configuration, tuning, developing drivers, and applications., • Experience leading software development teams through the full software development lifecycle (SDLC) and in-depth experience with agile software development processes using modern agile frameworks., • Experience with designing and developing distributed applications, micro-services, and ReSTful APIs in cloud and cloud-hybrid environments to promote reuse and interoperability., • Experience developing and managing containerized software applications., • Broad experience with both SQL and no-SQL database technologies to support the development and operation of distributed collaborative autonomy., • Excellent written and oral communication skills and able to communicate complex technical concepts to non-technical audiences., • Must be eligible for a TS/SCI security clearance. PREFERRED POSITION QUALIFICATIONS: Preferred skills and experience include: • Experience developing software for autonomous unmanned systems., • Experience utilizing and integrating systems with military tactical networks, secure network infrastructure, and associated interfaces., • Experience with the integration of AI/ML algorithms, models, and software into distributed autonomous systems and infrastructure., • Experience with modeling and simulation for the test and evaluation of MLOPS and autonomous systems algorithms., • Knowledge and experience working within the Department of Defense ecosystem., • Knowledge and experience building a digital engineering environment for software development., • A current TS/SCI security clearance. Travel: 20-25% anticipated based on customer needs AIT Synergy has a competitive benefits and compensation package that includes Medical/Dental coverage, 401(k), Paid Time Off, Holidays, and opportunities for tuition reimbursement and training compensation relevant to task duties.

Job Description Azure Engineer plays a key role in the design, development, and management of our Azure infrastructure. This position is responsible for managing, maintaining, and enhancing Azure public cloud environments. The ideal candidate will have hands-on experience in provisioning and troubleshooting Azure infrastructure resources, as well as strong skills in identifying and resolving complex issues efficiently and professionally. In this role, the Azure Engineer will contribute to building new environments for our cloud customers and ensure that these environments are developed and maintained for high availability, scalability, and ease of maintenance. Collaboration with customers will also be an important part of the job, particularly when scheduling maintenance windows and coordinating change management activities. Pod: Azure Delivery Leader: Cloud Implementation Leader Location: Tampa, FL (hybrid) Responsibilities: • Implement, support, and maintain 24x7 Azure CSP environments, RDS deployments and Windows technologies., • Make ongoing recommendations of Azure and Windows policies and standards – strategic planning., • Manage multiple large-scale projects in a fast-paced challenging environment and provide leadership to other members of the team., • Quickly convert business problems into technical solutions and opportunities., • Resolve Azure, Windows, and RDS escalations from clients and other team members., • Collaborate with customers and team members to troubleshoot and resolve issues., • Maintain and prioritize incidents, ensuring timely resolution., • Manage configuration and deployment of Azure resources in compliance with established technology policies., • Recommend technical solutions that will enhance performance, increase redundancy, and add flexibility to the existing infrastructure., • Troubleshoot Azure and Windows performance issues., • Maintain system availability and monitoring of critical services., • Maintain appropriate relationships with 3rd party vendors and evaluate vendor software, and communications products to provide recommendations to leadership., • Regular participation in change control activities that comply with ITIL change management., • Establish upgrade and backup strategies for core infrastructure., • Participate in on-call rotation as needed., • Experience:, • 4+ years' experience implementing and supporting Azure, Windows, and RDS technologies., • Technical Knowledge:, • Extensive knowledge of Windows technologies: RDS, IIS, GPO's, Active Directory., • Working knowledge of NetScaler Load Balancing solutions and Azure networking., • Working knowledge of Microsoft CSP program and Lighthouse., • M365\SharePoint support and implementation., • AVD support and implementation., • Powershell\Automation experience., • Experience with ASR/DR testing and failovers., • AZ-104 certification., • Working knowledge of M365 infrastructure and management., • Positive attitude, enjoy challenging solutions involving Azure, Citrix and Window architecture and maintenance., • Analytical Skills:, • Strong data analysis and reporting skills, with the ability to create and interpret sales KPIs., • Initiative-taker who can work independently on complex issues., • Ability to coordinate multiple tasks simultaneously., • Demonstrated capability to achieve results under pressure., • Communication:, • Demonstrates communication and interpersonal skills, with experience building relationships across teams. ABOUT ENAVATETransforming Businesses and the Lives They Touch At Enavate, we are more than just a Microsoft Gold Partner—we're a trusted partner in Enterprise Resource Planning (ERP) consulting, Cloud services, and managed services. We help businesses embrace the future by guiding them through ERP implementations, migrations to the cloud, and integrations that streamline their operations, allowing them to thrive in an ever-evolving business landscape. Our work isn't just about technology—it's about transforming the way businesses operate, empowering them to grow, innovate, and succeed. By partnering with our clients, we provide peace of mind, enabling them to focus on what matters most while we handle the complexity of their systems and processes. To learn more about what we do and how we make an impact, please check out our "What We Do?" 1-pager. Our Culture Whether you're joining us in North America, Europe, or beyond, Enavate offers a dynamic and collaborative environment where you'll have the opportunity to make a real impact. At Enavate, we're driven by our core values, and our people are at the heart of everything we do: • Team Members: We take care of our own., • Innovation: We explore, evolve, and seek excellence at every level., • Results: We are achievers who set high goals and reach them. To gain a deeper understanding of our values and the environment we foster at Enavate, take a look at our "Enavate Culture" Guide. What We Offer At Enavate, we're committed to providing a supportive and rewarding environment that empowers you to thrive both professionally and personally. Here's a glimpse of the benefits and perks you'll enjoy as part of our team: For more details about the benefits available in your region, check out the following links: • USA Benefits Guide, • Europe Benefits Guide We prioritize hiring candidates who are based in or near these locations. For employees based in Tampa and Fargo, we encourage team members to spend at least three days per week in the office to foster collaboration, connection, and contribute to our vibrant team culture. Our Hiring Process At Enavate, we take a thoughtful approach to hiring that ensures a great fit for both you and us. Our process includes: • Intro Call – A brief conversation to get to know you, discuss your background, and determine if there's a mutual fit., • Predictive Index Assessment – We use the Predictive Index to understand your natural strengths and how they align with the role and our team dynamics., • Interviews – A combination of technical and cultural interviews, focused on your expertise, problem-solving abilities, and alignment with our core values., • Debrief – Our team will come together to discuss your fit for the role and next steps. Enavate is an Equal Opportunity employer. This commitment applies to all candidates and employees regardless of race, ethnicity, citizenship, creed, place of origin, religion, sex, gender identity, gender expression, sexual orientation, family status, marital status, disability, age, and any other protected characteristic. Accommodation requests can be made at any stage of the recruitment process, and during employment by contacting our Talent Acquisition team. Join Us in Our Mission! At Enavate, we believe in transforming businesses and the lives they touch – because to us, it's personal. If you're ready to make an impact, we invite you to be part of a team that listens, challenges, collaborates, and takes action. Together, we're reshaping the future of ERP and how businesses operate, offering fresh perspectives and innovative solutions. Are you ready to transform your career and help us shape the future? Enavate is the place for you.

Job DescriptionDescription: Princeton Precision Group: Always Advancing. Each business unit under the PPG portfolio has been deliberately selected for their ability to support their customers, lead their industry, and provide high quality products. Your journey with us is more than just a job. It is an opportunity to support the manufacturing of critical hardware to key defense programs, supporting missions to space and providing access for global travel. Join us in the journey! The Wax Process Engineer will ensure all safety, production, quality, and plant processes are being correctly practiced and executed. Accurate and consistent communication with team leaders, managers, administrative staff, and upper management will be essential to the success of this position. Highlights and Benefits • Quarterly profit-sharing bonus; eligible upon hire, • Paid time off, • 401(k) with company match, • Paid holidays, • Tuition / professional development reimbursement, • Health, dental, and vision insurance, • Optional HSA with company contribution, • Short-term disability, long term disability, and life insurance at no cost, • Limitless opportunity for advancementRequirements:, • Ensure compliance with safety policies and rules, • Maintain and improve our die maintenance program; also perform die maintenance as needed, • Ensure paperwork is correct and complete per the AS9100D standard, • Ensure wax injection equipment function and output are according to specifications, • Complete one continuous improvement per week in the wax department to drive the largest cost reductions first., • Act as a resource for employees to resolve operational issues during the shift, • Daily audit of wax ultrasound (UT) and X-ray compliance, • Assist teams to achieve existing goals in production and quality, • Provide technical support on all wax equipment, • Hands-on training for new employees, troubleshooting problems as needed, • Perform other work-related duties as assigned, • Perform daily quality and process audits to ensure procedures are being followed on the manufacturing floor, • Update procedures/work instructions to reflect your proven and documented process changes and quality standards, • Perform data analysis and daily scrap reviewal to identify process repeatability, • Conduct engineering trials to evaluate improvements and document findings, • Document yields and present daily to management on a scheduled basis, • Ensure wax patterns meet quality standards by identifying deviations, leading root cause investigations, and implementing corrective actions, • Communicate with finishing and injection department managers daily regarding pattern quality., • B.A. in Mechanical, Metallurgical, Materials, or Chemical Engineering or a related engineering discipline, • Will consider three years minimum of wax injection operation or related experience, • Must have a good command of the English language, both written and spoken Being bilingual is a plus The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to stand; walk; sit; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. While performing the duties of this job, the employee is exposed to plant environment to include moving mechanical parts, risk of electrical shock. Safety Glasses must be worn at all times. The noise level in the work environment is usually moderate. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. The company is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. Princeton Precision Group abides by applicable export control laws including the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. All positions require access to ITAR/EAR-controlled information. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a “U.S. Person” under relevant regulations. PIf2cde109ca46-25405-38242137

Job DescriptionWho we are CTI, a Parsons Company is a high-tech software, systems engineering, and operational support corporation dedicated to providing cutting-edge engineering, and system development and support. We provide operationally-focused technology solutions for military and security applications. A veteran-owned company, CTI is committed to developing the next generation of advanced technologies in a friendly, product, and customer-focused environment. CTI specializes in developing software solutions that enable the collection, aggregation, transport, and visualization of highly complex data sets in a meaningful context to the warfighter. We are seeking a Senior Systems Integration Engineer who will be a key technical leader within our embedded platforms and autonomous systems development team. This role supports United States Special Operations Command programs and advanced unmanned systems (UxS) initiatives, delivering highly reliable embedded hardware and software solutions for field deployment. The successful candidate will be passionate about pushing the boundaries of system engineering, system integration, and autonomous vehicle technology, with hands-on experience bringing systems from concept to production deployment. Responsibilities include, but are not limited to: • Support the design, development, and deployment of embedded hardware/software solutions for Nvidia Jetson, Qualcomm SoCs, and other SBC/SoM platforms, • Perform board bring-up, hardware troubleshooting, and kernel-level development including device drivers, kernel modules, and device tree management, • Integrate drone flight management and autonomous systems management software, • Integrate fault-tolerant software architectures for DDIL environments, mesh networks, and BLOS communications systems, • Oversee deployment of STIG-compliant embedded software to production environments in support of DoD requirements, • Implement GitOps workflows (Argo CD/Flux) and CI/CD pipelines (GitLab CI/GitHub Actions) to continuously deliver infrastructure and apps to distributed, sometimes air-gapped environments, • Promote lab best practices, network topologies, and integration standards in compliance with DoD guidelines, • Coordinate, collaborate, and execute software and hardware integration exercises with customers, external vendors, and partner agencies, • Facilitate planning meetings, manage time independently to support scheduled events, and deliver after-action reports and whitepapers to capture lessons learned and drive improvement, • Design, develop, document, test, and debug new and existing software systems and/or applications, • Constructively participate in code reviews, • Analyze user needs to determine technical requirements, • Write technical specifications based on conceptual design and stated business requirements, • Analyze code to find causes of errors/inefficiency and revise programs, as needed Travel requirements: Willingness and ability to travel up to 50% for hands-on field testing, system integration, and deployment activities across different locations. Necessary Skills and Experience • Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or related technical field. Master's degree preferred., • Active U.S. Government Secret clearance with SCI eligibility (TS/SCI). U.S. Citizenship is required as only U.S. citizens are eligible for a security clearance., • Minimum 11-15 years of hands-on experience in embedded systems engineering, with direct experience on Nvidia Jetson, Qualcomm SoCs, or equivalent SBC/SoM technologies., • Proficiency in C/C++ and Python or Rust, with demonstrated application in embedded and performance-critical environments., • Proven track record in embedded Linux systems, including kernel driver/module creation, device tree configuration, and GPU driver integration., • Strong background in CI/CD pipeline development and maintenance, with hands-on experience using GitLab, Nexus, and modern DevOps toolchains., • Experience developing software in alignment with Security Technical Implementation Guides (STIG) and other cybersecurity standards., • Experience facilitating in PI Planning, Sprint Planning, and Inspect & Adapt events to ensure program alignment., • Skilled in preparing and delivering technical documentation, including after-action reports, and whitepapers.Beneficial Skills and Experience, • Experience in DoD programs and drone (UAS) development., • Excellent communication skills, with ability to coordinate across customers, vendors, and partner agencies., • Experience developing drone/UAS flight management software and autonomous systems management software., • Expertise in designing and deploying fault-tolerant systems in DDIL environments., • Familiarity with mesh networking, BLOS communications architectures, and secure software deployment in defense environments., • Experience in MIL-STD-810/461/882E compliance, STANAG 4586, DO-178C, and DO-254 guidelines., • Experience with air-gapped registries, offline updates, reproducible builds, and SBOM attestation in CI., • Experience in debugging skills for hardware/software integration issues in embedded environments., • Experience in scripting/coding such as Go, Python, or Rust for operators, CLIs, and automation., • Medical, dental and vision insurance, • H.S.A. (partially funded by CTI) and Flex Spending, • Company-paid life insurance/AD&D and disability insurance, • Optional supplemental life, critical illness, hospital indemnity and accident insurances, • Paid vacation, sick leave and holidays, • 401k plan with Safe Harbor contribution, • Tuition reimbursement/professional training options, • Employee Assistance Program, • Travel Assistance, • Financial Planning Assistance, • Voluntary Pre-Paid Legal, • Flexible schedules with telecommuting options

Job Description We are hiring! We are seeking a Senior Engineer - Transmission Lines in Orlando and Tampa, FL. Our client is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. About the Role: As a Senior Engineer, you will provide senior-level engineering/technical expertise on complex electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. Specifically, the position manages, prepares, reviews and/or provides guidance for line routing, survey coordination, PLS-CADD modeling, structure design, foundation design, clearance checks, plan/profile development, material specification and procurement, constructability evaluations, work order package preparation, permitting, vendor/subcontractor coordination and construction support. Responsibilities: • Develop and approve PLS-CADD Criteria, • Finalize PLS-CADD models, • Schedule project tasks for project support team, • Attend client stakeholder meetings, • Complete design review meetings with the client, • Mentor/train other engineering team members, • Provide input on special design questions, • Bachelor's in Engineering (required), • Professional Engineer (PE) certification (required), • 8+ years of related transmission line engineering experience in the electric utility industry (required), • Experience in using PLS-CADD for designing transmission lines (required), • Strong experience with design codes and standards such as NESC, IEEE, ASCE, and ACI, • Strong experience with liaising substation, environmental, right-of-way construction and maintenance stakeholders, • Demonstrated ability in the application of engineering theories and principles, • Increasingly proficient in practices of researching engineering and design issues, evaluating alternatives, preparing, and presenting recommendations, • Ability to work in a safe manner and always obey safety regulations, • Ability to be a self-starter and thrive in an unstructured, varied and deadline driven work environment, • Strong ability to collaborate with team members as well as peers in the electrical utility industry, • Effective communication skills (verbal, written and presentation), • Demonstrated verbal and technical writing skills, • Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy. If you meet the qualifications, please apply now!

Job Description Position Summary Description Directly accountable for providing supervision, coaching, mentoring, safety leadership and technical guidance to a multi-disciplined team of engineers and designers in support of producing high quality, timely and cost-effective solutions to technical and business objectives. Manages the delivery of transmission and substation capital projects and focuses on the achievement of project cost and schedule objectives while achieving excellence in the areas of project safety and quality. Manages risks to ensure proactive identification and mitigation and works collaboratively with Capital Portfolio Management and Controls to ensure alignment with established process and effective monitoring, controls and reporting throughout the project lifecycle Drives the recruitment and selection, training and development, performance management, and rewards and recognition of a team of professional and technical resources. Holds the team accountable for best practices with respect to engineering and project execution, while ensuring compliance with all applicable Federal, State and enterprise standards, guidelines, policies and procedures. Essential Functions • Manages a team of professional and technical resources in designing and engineering electric transmission facilities which include the additions of and modifications to transmission lines, greenfield and brownfield substations in a manner that cost-effectively meet the needs of customers and comply with all applicable safety, industry, and regulatory standards and requirements., • Leads the development and implementation of detailed project staffing plans that ensure the availability and utilization of the right disciplines, skills and competencies to execute project work plans cost-effectively and in accordance with project schedules., • Actively involved with the transmission planning team to provide technical inputs, advice and options for future T&S infrastructures, • Oversees cross-functional coordination and communication to ensure project alignment throughout the project lifecycle and that stakeholders and customers’ expectation are effectively managed, while concurrently maintaining delivery momentum., • Leads the development and implementation of processes, workflows, engineering and design standards, and equipment and material standards associated with transmission line and substation facilities., • Plans, directs and manages the work deliverables of departmental personnel to maximize performance and individual development; and to ensure effective teamwork and employee collaboration in the fulfillment of departmental and Cooperative goals and objectives within budget., • Influences and supports resolution to problematic field situations including system operations, system maintenance and reliability matters across the transmission and substation infrastructure., • Administers and complies with Seminole Electric Cooperative, Inc. Board policies associated with the integrated transmission system., • Actively engages in negotiation and administration of contracts and agreements to ensure terms are negotiated and administered in the best interests of the Cooperative., • Directs the development and implementation of departmental budgets, work plans, associated contracts and performance goals., • Partners with other organizational leaders to Identify and implement best practices and continuous improvement initiatives to improve productivity and optimize capital project cost., • Establishes assessment systems and monitors work activities to ensure compliance with applicable standards, policies, procedures and guidelines in addition to alignment with budget, schedule and quality expectations., • Maintains effective working relationships with all stakeholders including employees at all levels within the corporation., • Ensures smooth operations, productive communications, and effective understandings during all interpersonal contacts., • Supports the execution of corporate and division vision, strategic initiatives and objectives., • Performs other duties as applicable to the position or as assigned., • NERC Compliance: Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready”. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM. Qualifications and Education Requirements • BS Degree in Engineering, • Twelve (12) years of progressive experience in electric utility environment including at least eight (8) years of direct experience in engineering, construction and/or project management related to transmission and substation facilities at a voltage level greater than 100kV; and at least three (3) years of experience in a leadership or supervisory role with recruitment and selection, training and development and/or performance management accountabilities, • Working knowledge with Microsoft Office Professional Suite, including Word, Excel, Outlook, and PowerPoint, • Strong Proficiency with Microsoft Project, Primavera or comparable project management software tool, • Demonstrated ability to engage effectively with all levels within and outside of the organization, • Proven track record of providing leadership to meet established goals, and foster an environment of continuous improvement and professional development Technical Competencies/Skills: • Transmission Line and/or Substation Design, • T&S Engineering and design principles and best practices, • Project management tools and concepts, • Equipment applications, construction materials and practices, • Understanding of contract commercial terms and conditions language, • Transmission and/or Substation equipment and work methods, • Communication – written and verbal, • Presentation, • Relationship building, • Workforce planning, • Innovative thinker, • Analytical, • Multi-tasking – multiple assignments and demands, • Leadership and coaching, • Employee engagement and team building, • Employee training and development Physical Requirements Must be able to follow established protective measures including wearing required personal protective equipment (PPE). Must possess a valid driver’s license and acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. Occasional travel to various locations in state and out-of-state to visit job sites and attend meetings with consultants and equipment suppliers is required. While working in certain areas of the plant there is the potential for exposure to hazards typical of an industrial working environment. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Facility Services LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base Salary: $140,000 - $155,000, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. The Corporate EHS Director is responsible for leading Limbach’s most critical safety Centers of Excellence (COEs), ensuring the development, implementation, and continuous improvement of programs that protect our employees and advance a culture of safety. This role provides strategic leadership while remaining actively engaged in the field to ensure programs are meaningful, practical, and impactful. The incumbent serves as a key partner to Regional EHS Directors and other business leaders, bridging corporate safety strategy with operational execution. This Position… Some examples of the work you might do includes: • Centers of Excellence Leadership: Leads corporate safety COEs including Operational Risk Management (incident management, SIF program, and risk assessment). Partners with Regional EHS directors to develop COE programs and support their implementation across branches and projects, ensuring each initiative aligns with the corporate safety strategy and addresses the realities in the field., • Strategic Leadership and Safety Culture: Drives a clear corporate safety vision and strategy that supports the Company’s overall business goals. Champions the “Hearts & Minds” culture at the corporate level by embedding scalable processes and programs that promote continuous improvement. Uses employee feedback and data to refine strategies and programs, ensuring they remain effective and responsive to organizational needs., • Program Oversight and Compliance: Provides company-wide oversight of safety programs, training initiatives, and strategic objectives to ensure consistency and effectiveness across the organization. Ensures compliance with all federal regulations, industry standards, and company requirements, while establishing frameworks for incident response, risk mitigation, and emergency management at the corporate level., • Coaching, Consulting and Stakeholder Engagement: Serves as a trusted partner to Regional Safety Directors, branch managers, and operations teams by offering corporate-level coaching, guidance, and technical expertise. Supports consistent application of safety programs across regions and represents the Company at the corporate level with industry groups, regulatory agencies, and other key stakeholders., • Training and Development: Leads the design, development, and delivery of corporate safety training programs that strengthen both technical competence and leadership capability. Collaborates with the Talent Development team to ensure training integrates with broader leadership development, skill-building, and organizational performance initiatives. Aligns all training with COE objectives so employees and leaders are equipped to work safely and lead safely., • 10+ years of progressive relevant experience, with at least 7 years in a dedicated safety role., • Prior work experience in a highly safety sensitive environment, such as construction., • Experience navigating a decentralized, matrix environment., • Strong record of building a proactive, integrated safety culture., • Desire and ability to connect at all levels of the organization., • Demonstrated experience fostering a culture of collaboration, innovation, and continuous improvement., • Robust understanding of EHS compliance., • Practical experience translating safety into the day-to-day experiences of individuals across the organization., • Experience leading root cause analysis and implementing corrective actions., • Skilled at translating key concepts such as hazard identification and safety risk management into repeatable processes., • Demonstrated experience developing partnerships and influencing behavior and culture across all levels of the organization., • Capacity to adapt to changing priorities, handle multiple projects simultaneously, and excel in a complex environment., • Proactively stays abreast of changing industry trends and best practices, translating this intel into business strategy., • Must have a valid driver's license., • Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company., • Bachelor’s degree in Occupational Health and Safety, Construction Management, or a related field is preferred., • Certified Safety Professional, • Experience with Human and Organizational Performance (HOP) principles., • Prior people leadership experience, either directly or indirectly., • Leadership presence with exceptional interpersonal and communication skills at all levels., • Experience in identifying, defining, and actualizing organization-wide objectives in a practical, measurable way with defined results required., • Qualified for Fall Protection, Confined Space, and Trench & Excavation., • OSHA 500 Construction/501 Trainer Certification., • Experience with a general or controlling contractor., • Current CPR/First Aid/AED Trainer., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates 50% of the time in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, filing cabinets, and printers., • In performing the duties of this job, the incumbent is regularly required to sit, stand, walk, talk, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • S/he may occasionally be required to climb, crouch, kneel, stoop, feel, and grasp., • This is considered a medium work position, which means possible exertion of up to fifty (50) pounds of force occasionally, and/or up to thirty (30) pounds of force frequently, and/or up to ten (10) pounds of force constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer. #LFS

Job DescriptionThe Mission Starts Here TheIncLab engineers and delivers intelligent digital applications and platforms that revolutionize how our customers and mission-critical teams achieve success. As Product Development Manager for our Software Platforms, you will play a critical role in shaping the future of our defense-related products and solutions. You will have responsibility for overseeing projects across the entire product lifecycle, from first concept to launch. Join us in shaping the future of digital products for defense. If you are ready to work with purpose and impact, apply today! Your Mission, Should You Choose to Accept As Product Development Manager you will be responsible for leading the development, planning, and execution of software products, ensuring they meet the needs of DoD and its users, while adhering to security and compliance requirements. You will be responsible for defining product strategies, executing market research, gathering customer requirements, and working closely with cross-functional teams to bring innovative and disruptive products to the market. Your work will involve close collaboration with engineering, marketing, sales, and external stakeholders to ensure our products meet the specific needs of the defense industry. You will drive the product development lifecycle from concept to launch, ensuring that our solutions not only meet but exceed customer expectations. This role requires a deep understanding of defense market dynamics and customer needs, enabling TheIncLab to deliver cutting-edge products that transform the defense industry. If you are passionate about creating innovative products and have the expertise to bring them to market successfully, we would love to hear from you. What will you do? • Define and execute product strategies and roadmaps for defense-related products, aligning with company objectives and market opportunities., • Conduct comprehensive market and competitive analyses specific to the defense industry, identifying trends, customer needs, and potential opportunities., • Develop product requirements, use cases, and specifications., • Manage the product backlog and prioritize tasks based on value and impact., • Collaborate with Research and Development scrum teams to execute the product strategy., • Oversee the development of lifecycle, from concept to deployment and maintenance., • Work closely with engineering, design, and other cross-functional teams to drive product development and launch activities., • Monitor product performance and gather feedback to drive continuous improvement., • Ensure adherence to DoD security standards and compliance requirements., • Manage project budget and resources effectively., • Engage with defense customers, stakeholders, and end-users to gather requirements, solicit feedback, and ensure products meet or exceed their expectations., • Write and manage Product Requirements Documents (PRDs) and collaborate with engineering teams to ensure technical feasibility, scalability, and translate customer needs into Engineering Requirements Documents (ERDs)., • Leverage knowledge of existing military standards, specifications, and prior solicitations to inform and drive product requirements, especially in the absence of direct customer input., • Bachelor's degree in Computer Science, Systems Engineering, Software Engineering, or a related STEM field., • 4+ years of experience in product development or program management, preferably within the software, aerospace and defense industry., • Proven market research capabilities, • Experience working directly with Department of Defense (DoD) customers and programs., • Proven experience in bringing defense products from concept to deployment., • Strong experience in managing cross-functional teams and coordinating complex projects., • Possess a strong understanding of software development methodologies, including Agile and DevOps., • Exceptional analytical and problem-solving skills, with the ability to make data-driven decisions., • Excellent communication and presentation skills, with experience interfacing with customers and senior leadership., • Demonstrated ability to develop and execute successful product strategies and go-to-market plans., • Ability to travel up to 20% depending on customer needs., • This is a hybrid position and currently requires three days in office (Tuesday to Thursday) at one of our facilities in Tampa FL, Nashville TN or McLean VA. Preferred Qualifications • Master’s degree in Computer Science, Systems Engineering, Software Engineering, or a related field. Clearance Requirements What We Offer At TheIncLab we recognize that innovation thrives when employees are provided with the support and resources, they need to be successful in balancing career and life. TheIncLab offers a range of benefits. As part of our team, you will enjoy: • Hybrid and Flexible Work Environment that supports working remote and in-office., • Professional Development Programs to support training and certification reimbursement, skill development, continued learning, and career advancement., • Paid Time Off for personal time off, volunteering, holidays, and more., • Health and Wellness Benefits that include options for Medical, Dental, and Vision insurance along with access to Wellness, Mental Health, and Employee Assistance Programs., • 100% Company Paid Benefits that include STD, LTD, and Basic Life insurance., • 401(k) Plan Options that includes up to a 4% match and immediate vesting., • Incentive Bonuses for eligible clearance, performance, retention, and referrals., • A company culture that values your individual strengths, career goals, and contributions to the team. About TheIncLab Founded in 2015, TheIncLab (“TIL”) is the first human-centered artificial intelligence (AI+X) lab. We engineer complex, integrated solutions that combine cutting-edge AI technologies with emerging systems-of-systems to solve some of the most difficult challenges in the defense and aerospace industries. Our work spans diverse technology landscapes, from rapid ideation and prototyping to deployment. At TIL, we foster a culture of relentless optimism. No problem is too hard, no project is too big, and no challenge is too complex to tackle. This is possible due to the positive attitude of our teams. We approach every problem with a “yes” attitude and focus on results. Our motto, “demo or die,” encompasses the idea that failure is not an option. We do all of this with a work ethic rooted in kindness and professionalism. The positive attitude of our teams is only possible due to the support TIL provides to each individual. At TIL, we believe that every challenge is an opportunity for growth and innovation. Our teams are encouraged to think outside the box and come up with creative solutions to complex problems. We understand that the path to success is not always straightforward, but we are committed to persevering and finding a way forward. Our culture of relentless optimism is not just about having a positive attitude; it is about taking action and making things happen. We believe in the power of collaboration and teamwork, and we know that by working together, we can achieve great things. Our teams are made up of individuals who are passionate about their work and dedicated to making a difference. Learn more about TheIncLab and our job opportunities at . **Salary range guidance provided is not a guarantee of compensation. Offers of employment may be at a salary range that is outside of this range and will be based on qualifications, experience, and possible contractual requirements. **This is a direct hire position, and we do not accept resumes from third-party recruiters or agencies.

Job Description About Cousins Properties: Headquartered in Atlanta, Cousins is a fully integrated, self-administered and self-managed real estate investment trust (REIT). Cousins has a simple, compelling strategy: Premier urban Sun Belt office portfolio, Disciplined about capital allocation, Best-in-class balance sheet, with Strong local operating platforms. Acting through its operating partnership, Cousins Properties LP, primarily invests in Class A office buildings located in high-growth Sun Belt markets. Cousins Properties (NYSE: CUZ) develops, owns, and manages a 20 million square foot trophy office portfolio in the high-growth Sun Belt markets of Atlanta, Austin, Charlotte, Dallas, Nashville, Tampa, and Phoenix. Founded in 1958, Cousins creates shareholder value through its extensive expertise in the development, acquisition, leasing, and management of high-quality real estate assets. The Company has a comprehensive strategy in place based on a simple platform, trophy assets, and opportunistic investments. For more information, please visit . Job Summary: The Building Engineer - Commercial Office will assist in the hands-on maintenance of building systems for the safe, efficient, and proper operations of all assigned properties. This position will perform minor repairs and helps in the operation, monitoring, and performance of preventative maintenance on building systems to include life safety systems as necessary. This position is located in Tampa, FL. This position is on-site. This is not a remote or hybrid position. (For Cousins' internal candidates - this is equivalent to a Grade II Engineer position.) Responsibilities: Electrical Systems • Possess a trained and working knowledge of A.C. circuits and safety procedures, • Possess a trained and working knowledge of the procedures for resetting of breakers, • Possess a trained and working knowledge of basic refrigeration cycle, • Possess a trained and working knowledge of DDC devices found in a commercial office building, • Some properties may require a trained and working knowledge of pneumatic systems, • Responsible for minor preventative maintenance of an AHU, • Respond to HVAC calls; determine if repair is needed in a timely manner, • Test & make minor adjustment to chemical treatment levels in water system, • Perform daily inspections and log of a chiller and report anything out of range, • Replace belts, motor, bearings, actuators, and values, • Possess a trained and working knowledge with the ability to troubleshoot and repair field devices such as a power induction unit, variable volume units (PIU/VAV) and similar diverse types found in a commercial building, • Will be involved with set point adjustments with the buildings energy management system, • Perform basic preventive maintenance on plumbing systems, • Rebuild and repair flush valves and faucets, • Responsible for inspecting and replacing wax bowel seal and remounting of toilet and urinals when needed, • Responsible for minor preventative maintenance of a systems pump, • Perform required operations on the buildings life safety systems, • Identify and respond to fire alarm and troubles in a timely manner, properly enable and disable points, • Conduct and log a weekly inspection of Emergency Generator and Fire Pumps, • Repair and replace door closures & minor door hardware as needed, • Responsible for minor adjustment and repair of security systems, • Read and record tenant utility meters, • Understanding of mechanical drawings and wiring diagrams Required or Preferred Knowledge, Skills, and Abilities: • A minimum of 4 years of experience in building maintenance industry and/or a certified and credited trade school degree in HVAC, electronic, or other industry related trade required, • High School Diploma or GED required, • Must be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, voltmeter, manual drain auger, safety goggles, ear protection, and fire extinguisher, • Must be able to operate heavy equipment such as chillers, generators, switchgear, pumps, air handling units etc., • Must have excellent organizational and problem-solving skills, • Must possess excellent customer service skills, • Must be a team player, able to work outside the core business hours when needed and willing to accept a variety of tasks associated with this position, • Must possess strong interpersonal skills and an ability to work and communicate effectively with all levels of operations, • Must be a self-starter and able to work well with minimal supervision, • Must be able to speak, read, write and understand the primary language(s) used in the workplace, • Must be available for shift or weekend assignment. Shift assignments are designated at the discretion of the Chief Engineer and are subject to change during tenure, • Each property maintains an on-call engineering schedule. The schedule is subject to change at the needs and discretion of the property., • Customer Service – Demonstrate optimum customer service delivery while performing all job functions., • Responsiveness – Need to perform responsibilities with an acute sense of urgency to meet the needs of others; respond to solve problems; willing to accept a variety of tasks associated with this position and be flexible., • Integrity - Demonstrate sound business ethics; consistently comply with organizational values; protect confidential information., • Must be able to stand and exert well-paced mobility for up to 4 hours in length, • Must be able to bend, stoop, squat, and stretch to fulfill cleaning and repair/maintenance tasks, • Must be able to lift to 50 lbs. on a regular and continuing basis, • Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening, and hearing ability and visual acuity

Job Description Job Title: Senior Project Manager / Client Relationship Manager I - Mechanical or Electrical Background (PE License Preferred) Experience: Minimum of 10 years Location: Tampa, Florida Position Overview: We are seeking a Senior Project Manager / Client Relationship Manager with a strong background in mechanical or electrical engineering, preferably holding a PE license. This role will be pivotal in overseeing and managing projects primarily within the healthcare sector, with additional focus on higher education, K-12, federal government, and stadium projects. Responsibilities: Management: • Facilitate communication between clients, project team members, owners, and architects by attending meetings and documenting critical issues., • Monitor project budgets and ensure alignment with man-hour allocations; adjust schedules as necessary., • Identify, negotiate, and manage fees for additional services required during project execution., • Develop and nurture business relationships crucial to project success; actively engage in business development activities with current clients., • Validate project scope and requirements with clients and stakeholders, collaborating with the Client Relationship Manager (CRM) or Location Leader when necessary., • Assist in financial planning by negotiating fees, preparing proposals, and participating in budgeting processes, coordinating with CRM or Location Leader as appropriate., • Hold a technical or bachelor's degree in relevant engineering disciplines, supplemented by ten years of practical experience on similar projects., • Possess Professional Engineer licensure., • Preferably have experience in healthcare building design., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Demonstrate a comprehensive understanding of engineering principles, methodologies, project approaches, and system designs., • Basic accounting knowledge is necessary for budget creation and maintenance., • Focus on healthcare markets, with additional experience in higher education, K-12, the federal government, and stadiums considered advantageous., • Experience with hospitals/healthcare projects, encompassing new builds, renovations, and rehabilitations., • Bachelor of Science in Mechanical or Electrical Engineering.

Job Description NOVA Engineering is seeking an experienced Senior Building Enclosure Consultant for our growing Central Florida operations. This role is ideal for a seasoned professional based in either the Orlando or Tampa, FL metro areas who thrives in a dynamic consulting environment and is passionate about building science and envelope performance. Key Responsibilities: • Conduct peer reviews of architectural drawings, specifications, shop drawings, and submittals with a focus on building enclosure systems., • Design remedial roofing and envelope solutions for existing facilities., • Perform visual surveys, moisture assessments, pre-design evaluations, and property condition assessments., • Lead forensic investigations into building enclosure and roofing failures or performance issues., • Occasionally perform field testing of roofing, waterproofing, window, and curtainwall systems in accordance with ASTM, AAMA, TAS, and ANSI standards., • Conduct quality assurance inspections to verify compliance with design documents, manufacturer guidelines, and industry standards., • Prepare detailed technical reports documenting findings, testing results, and recommendations., • Minimum of 8 years of experience in building enclosure and roofing consulting., • Professional licensure as an Engineer or Architect preferred but not required., • Highly desirable certifications:, • Registered Roof Consultant (RRC), • Registered Waterproofing Consultant (RWC), • Registered Roof Observer (RRO), • Certified Infrared Thermographer (CIT), • Strong technical knowledge of building construction and envelope systems., • Proven ability to identify and resolve issues related to constructability, integration, durability, thermal performance, and maintenance of building envelopes., • Excellent communication skills and proficiency in Microsoft Office (especially Word and Excel)., • Ability to perform work in outdoor temperature extremes, • Ability to lift equipment up to 50lbs., • Ability to occasionally overnight travel in and out of state., • Ability to climb ladders . In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: • Comprehensive group medical insurance, including health, dental and vision, • Opportunity for professional growth and advancement, • Certification reimbursement, • Paid time off, • Company–observed paid holidays, • Company paid life insurance for employee, spouse and children, • Company paid short term disability coverage, • Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection, • 401K retirement with company matching of 50% on the first 6% of employee contributions, • Wellness program with incentives, • Employee Assistance Program About Nova Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth. Currently, NOVA employs 650+ personnel in 18 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent. #LI-JT

Job Description FIELD SERVICE ENGINEER FOR MEDICAL IMAGING DEVICE Are you ready to join one of the biggest names in Healthcare Technology Management? Are you ready to be part of something special... This is your opportunity to get in the door as we EXPLODE in growth! If you are energetic and passionate --> YOU NEED TO APPLY Who We Are: Founded by Philip Revien and Michael Fischer in 2014, 626 provides maintenance expertise on all medical technology equipment manufacturers and modalities. Philip and Michael first met in the maternity ward of a South Florida hospital on June 26, 2012, the day each of their sons were born. The vision for 626 (a tribute to their sons’ birth dates) was also born that day. The pair began talking and soon realized they shared a common goal— improving patient care. Two years later, 626 was established. What began as two men in a garage, 626 now employs more than 100 employees nationwide and has emerged as one of the fastest-growing third-party company in the healthcare technology management market. What You’ll Do: MUST HAVE PRIOR EXPERIENCE IN MEDICAL IMAGING DEVICE SERVICE AND REPAIR Summary/ Objectives Provider of medical imaging repair and maintenance seeks an experienced Service Engineer to maintain, and repair x-ray-MUST HAVE THIS SKILL SET AND EXPERIENCE!!! Thrives to provide technical support and troubleshooting assistance with equipment and maintain a high quality of customer satisfaction. Essential Responsibilities • Assist in the repair of diagnostic imaging equipment specific to X-ray or high-level electro-mechanical background, • Must be a self-starter, able to travel and work independently with minimal supervision, • Ability to resolve problems, think analytically, and communicate professionally in high-pressure, time-sensitive, customer environments, • Perform Scheduled preventative maintenance that includes calibrations and verifications of system specifications., • Learn and gain knowledge of imaging equipment in order to perform preventative maintenance on machines., • Accurately document all service activities in accordance with the Company Quality Standards., • Assess, calibrate, and maintain test equipment, • Submitting field service reports timely and according to functional standards., • Communicate with account manager on services being provided., • Manage and Maintain company assets required to perform all necessary job functions. Supervisory Responsibility There are no supervisory responsibilities for this role Work Environment This job operates in the field where the individual will be going to several different sites to and will be around a variety of medical imaging equipment. Work Schedule Primarily Monday thru Friday normal business hours occasional evening and weekends. Physical Demands The physical requirements that are essential to perform this job are to talk and to hear. It will also be required by the employee to frequently stand; walk, lift up to 75 Lbs., to use hands to handle or feel; and reach with hands and arms. Competencies • Ability to follow procedures and instructions/direction., • Ability to work well with others., • Communication Proficiency., • Business Acumen., • Customer Service Skills. Travel This position requires frequent and regular travel as needed to service the technical needs of customers. The individual in this position must be willing to travel and drive distances to get to a variety of sites within a 4 hour radius. Some travel and assignments will require flying and overnight stays. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Education and Experience · Must have formal training and field experience in one of the following that applies X-ray, mammography, ultrasound, MRI, PET, CT, injectors, · High School Diploma or GED Required · Some College or Degree Preferred 626 Opco LLC provides employment opportunities to all individuals regardless of race, color, age, religion, sex (including pregnancy and gender identity), national origin, sexual orientation, marital status, disability or genetic information. Please note that this job description is not a complete and comprehensive list of duties and responsibilities that are required of the employee. A responsibility or duties can or will change at any time with or without notice. Job Type: Full-time

Job Description Position Summary Description Demonstrates a high degree of technical knowledge to independently perform maintenance activities in a manner that will ensure the safe, efficient, reliable, and regulatory compliant operation of Seminole generating plants and transmission infrastructure, including substation major equipment, SCADA systems, RTUs, metering systems, telecommunication equipment and protocols, protection and control protective relaying systems and other associated equipment. Executes work activities involving a high degree of complexity with respect to technical engineering concepts, tools and analysis that are required in troubleshooting, calibrating, repairing, testing, and investigating operations or failures of systems components and equipment. Oversees and leads all phases of field troubleshooting, testing, and commissioning of projects associated with Seminole's high-voltage transmission infrastructure couple with the field technical support to Seminole’s generation plants. Provides technical support to various phases of capital and expense project life cycle that include project's conception, design and specification, estimating, scheduling, construction, and project closeout. May provide contractor management oversight during construction of capital projects and project management accountabilities for maintenance projects. Essential Functions • Develops and implements commissioning and maintenance test plans that are safe, effective, and efficient at meeting regulatory compliance requirements, corporate standards, corporate guidelines, industry standards, and industry best practices., • Performs operational checks and tests on various generation and substation facilities, including but not limited to, power circuit breakers, transformers, instrument transformers, disconnect switches, motor operators, battery systems, protective relaying system and equipment, SCADA systems, RTU’s, metering systems, power line carriers, wave traps and tuners., • Performs preventive, corrective, and emergent maintenance on substation equipment, protective relaying systems, SCADA systems, RTU’s, metering systems and associated equipment., • Operates and interprets readings from test equipment such as digital multi-meters, insulations testers, protective relay test sets and radio frequency measurement equipment to facilitate problem identification and/or safe operations., • Leads the investigation of operational incidents and/or equipment failures to determine root cause, recommended corrective actions, and mitigation measures., • Reviews and monitors applicable NERC PRC standards and ensure requirements are being satisfied, including RSAWs and documenting of evidence., • Provides technical guidance and oversight to Relay Technicians, SCADA Technicians, and Substation Technicians on protection and control, SCADA, and metering matters., • Supports the development of technical specifications of major electrical equipment, electrical components, RTUs and protective relaying systems., • Supports the request for proposal and/or sole sources process for system maintenance initiatives via proposal development, bid review and selections., • Monitors and evaluates emerging and recent technologies for application and integration by Seminole., • Prepares, reviews, and verifies substation and switchyard design for transmission and generation assets., • Tests and verifies that wiring of various substation control schemes is completed in accordance with construction design prints and achieve desired results., • Supports the maintenance leadership team in budgeting, cost estimation, quality assurance, quality control, and training., • Performs project management on System Maintenance projects., • Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM., • Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements Bachelor of Science degree in Electrical Engineering from an ABET accredited institution is required. Advanced degree in engineering preferred. Eight (8) years of progressively responsible power system industry experience that spans across generating plant and transmission environments and includes transformers, power circuit breakers, disconnects, and various control schemes. Field experience troubleshooting, testing, commissioning, and maintaining electrical systems, components, and equipment is required. Professional Engineer (PE) License is a plus. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Engineering Design, • Specifications/Request for Proposals, • Procurement, • Project Planning, • Quality Control, • NERC Compliance with PRC Standards, • National Electric Code, Safety Codes, OSHA Rules, and appropriate Florida and RUS standards and rules, • Transmission and generation relay setting principles and standards, • IEC 61850, • AcSELerator 5010 SEL, GE URPC software, • Effective verbal/nonverbal, listening and written communications, • Initiative-taker/self-motivated, • Leadership, • Focus on Quality, • Multi-tasking, • Risk Management, • Project and time management, • Organization, • Innovative and Always Learning, • Detailed Oriented, • Analytical and Problem Solving, • Collaborator, • Safety Focus and Oriented Physical Requirements Must be able to follow established protective measures including, wearing required personal protective equipment (PPE). Must possess an acceptable Motor Vehicle Report. Must be able to lift fifty pounds. Working Conditions Some travel, overnight stays, and work outside of normal business hours to existing and future transmission facilities, substation and generator sites as required. While working in certain areas of substations and/or switchyards, there is the potential for exposure to hazards typical of an industrial working environment. Work is outdoors with frequent travel away from the office environment. While working in certain areas of generation facilities, there may be extreme temperatures and conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Facility Services LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base salary range of $110K - $150K, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. As Sales Educator, you are responsible for delivering “best-in-class” learning experiences for those engaged in the sales function of the Company. By leveraging best practices to this population, including external curriculum, internally developed curriculum and talent strategies, this role directly impacts the revenue and profitability of the company. This role impacts the fulfillment of the Company’s core purpose of “Creating Great Opportunities for People” across the entire business. The successful incumbent will deploy strategies that improve the transference of knowledge and overall learning experience through the delivery and monitoring of the Company’s interactive learning programs and opportunities. In addition to leading the sales curriculum, this educator will have an opportunity to engage and lead across various aspects of the talent development strategy. This Position… Some examples of the work you might do includes: • Partners with the SVP of Sales and other senior leaders to provide talent and learning solutions to the target audience, aligned to the company strategy., • Oversees and directs virtual and in-person learning for those who own and enable sales across the company, including seminars, workshops, and individual learning sessions., • Partners with subject matter experts to provide impactful, effective talent development interventions., • Manages learning materials, attendance, and corresponding records and budgets for programs., • Develops system(s) to measure the impact of learning and talent interventions and identify opportunities for continuous improvement., • Makes educated recommendations on internal/external resources and best delivery method (instructor lead, self-instructed, train-the-trainer, on demand/computer-based) for each program, balancing effectiveness, efficiency, adult learning principles and the business’ core processes., • Serves as a curriculum design and facilitation subject matter expert for the assigned programs and scope., • Bachelor’s Degree in Education/Adult Education, Communications, HR, or a related field., • 5+ years of experience as a trainer or in a related role., • Prior experience in sales., • Proven track record of success in sales and/or project management training or years of experience., • Excellent communication, presentation, and interpersonal skills., • Strong coaching and mentoring skills., • Ability to develop and deliver effective training programs., • Must have a valid driver's license., • Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company., • Experience in the HVAC or building automation industries., • Experience with adult learning principles., • Experience with instructional design., • Certified Professional in Learning and Performance (CPLP) credential., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • In performing the duties of this job, the incumbent is regularly required to talk, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer. #LFS

Job DescriptionDescription: Princeton Precision Group: Always Advancing. Each business unit under the PPG portfolio has been deliberately selected for their ability to support their customers, lead their industry, and provide high quality products. Your journey with us is more than just a job. It is an opportunity to support the manufacturing of critical hardware to key defense programs, supporting missions to space and providing access for global travel. Join us in the journey! The Wax Process Engineer will ensure all safety, production, quality, and plant processes are being correctly practiced and executed. Accurate and consistent communication with team leaders, managers, administrative staff, and upper management will be essential to the success of this position. Highlights and Benefits • Quarterly profit-sharing bonus; eligible upon hire, • Paid time off, • 401(k) with company match, • Paid holidays, • Tuition / professional development reimbursement, • Health, dental, and vision insurance, • Optional HSA with company contribution, • Short-term disability, long term disability, and life insurance at no cost, • Limitless opportunity for advancementRequirements:, • Ensure compliance with safety policies and rules, • Maintain and improve our die maintenance program; also perform die maintenance as needed, • Ensure paperwork is correct and complete per the AS9100D standard, • Ensure wax injection equipment function and output are according to specifications, • Complete one continuous improvement per week in the wax department to drive the largest cost reductions first., • Act as a resource for employees to resolve operational issues during the shift, • Daily audit of wax ultrasound (UT) and X-ray compliance, • Assist teams to achieve existing goals in production and quality, • Provide technical support on all wax equipment, • Hands-on training for new employees, troubleshooting problems as needed, • Perform other work-related duties as assigned, • Perform daily quality and process audits to ensure procedures are being followed on the manufacturing floor, • Update procedures/work instructions to reflect your proven and documented process changes and quality standards, • Perform data analysis and daily scrap reviewal to identify process repeatability, • Conduct engineering trials to evaluate improvements and document findings, • Document yields and present daily to management on a scheduled basis, • Ensure wax patterns meet quality standards by identifying deviations, leading root cause investigations, and implementing corrective actions, • Communicate with finishing and injection department managers daily regarding pattern quality., • B.A. in Mechanical, Metallurgical, Materials, or Chemical Engineering or a related engineering discipline, • Will consider three years minimum of wax injection operation or related experience, • Must have a good command of the English language, both written and spoken Being bilingual is a plus The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to stand; walk; sit; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. While performing the duties of this job, the employee is exposed to plant environment to include moving mechanical parts, risk of electrical shock. Safety Glasses must be worn at all times. The noise level in the work environment is usually moderate. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. The company is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. Princeton Precision Group abides by applicable export control laws including the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. All positions require access to ITAR/EAR-controlled information. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a “U.S. Person” under relevant regulations.

Job Description Position Summary Description Directly accountable for providing leadership and tactical directions to a multi-discipline team of engineers that perform work activities associated with the reliable, accurate and safe operation of Seminole’s software applications, the associated hardware supporting real-time operations including the Energy Management System (EMS) and its associated field equipment as well as the engineering and design of Generation, Transmission and Substation protection schemes, including the calculation and determination of associated protection and control settings that promotes the safe and reliable operations of the generation and transmission infrastructure Drives the development and implementation of the organization’s System Protection and Operational Technology philosophy and oversees the planning, development and execution of applicable capital projects across the project lifecycle such that adverse impacts to project scope, schedule and budget are minimized. Drives the recruitment and selection, training and development, performance management, and rewards and recognition of a team of professional and technical resources. Holds the team accountable for best practices and continuous improvement with respect to safety, operation excellence, engineering, and project execution, while ensuring compliance will all applicable Federal, State and enterprise standards, guidelines, policies, and procedures. Essential Functions • Manages a team of professional and technical resources accountable for the reliable, accurate and safe operation of Seminole’s real-time operation software applications and the development of system protection standards, designs and settings for Seminole’s Generation and high-voltage transmission system., • Directs the OT staff to ensure the high-availability and reliable operations of the EMS, its communication infrastructure, and the associated field equipment., • Manages all Operational Technology application and ensure compliance with all applicable NERC CIP and Reliability standard requirements and measures., • Leads the development and implementation of detailed project staffing plans that ensure the availability and utilization of the right disciplines, skills, and competencies to execute project work plans cost-effectively and in accordance with project schedules., • Actively involved with the Operational Planning and Control Center Operations teams to provide leadership oversight, technical Operational Technology support, and change management in operating criteria and guidelines., • Oversees cross-functional coordination and communication to ensure project alignment throughout the project lifecycle and that stakeholders and customers’ expectation are effectively managed, while concurrently maintaining delivery momentum., • Oversees the applicable NERC PRC and CIP standards and ensures OT applications, devices, and settings are monitored for meeting the compliance requirements, including documenting of evidence to substantiate compliance., • Serves as requirement owner for assigned NERC standards., • Leads the development and implementation of processes, workflows, engineering, and design standards, with Operational Technology, Generation and Transmission system protection., • Ensures the EMS software, databases and displays reflect an accurate representation of actual field equipment., • Reviews, approves, and assigns all user change requests to the appropriate EMS Engineer. Periodically appraises the outstanding assignments to determine level of deadline achievement and takes corrective action where appropriate., • Reviews, verifies, and approves the software whitelist reports, the monthly security patching reports and the quarterly electronic access reports., • Plans, directs, and manages the work deliverables of departmental personnel to maximize performance and individual development; and to ensure effective teamwork and employee collaboration in the fulfillment of departmental and Cooperative goals and objectives within budget., • Influences and supports resolution to problematic field situations including system operations, system maintenance and reliability matters across the generation and transmission infrastructure., • Administers and complies with Seminole Electric Cooperative, Inc. Board policies associated with the integrated transmission system., • Actively engages in negotiation and administration of contracts and agreements to ensure terms are negotiated and administered in the best interests of the Cooperative., • Directs the development and implementation of departmental budgets, work plans, associated contracts and performance goals., • Partners with other organizational leaders to Identify and implement best practices and continuous improvement initiatives to improve productivity and optimize deliverables., • Establishes assessment systems and monitors work activities to ensure compliance with applicable standards, policies, procedures, and guidelines in addition to alignment with budget, schedule, and quality expectations., • Maintains effective working relationships with all stakeholders including employees at all levels within the corporation., • Ensures smooth operations, productive communications, and effective understandings during all interpersonal contacts., • Supports the execution of corporate and division vision, strategic initiatives, and objectives., • Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM., • Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements • BS Degree in Engineering from an ABET accredited institution is required. Advanced degree in engineering preferred., • Twelve (12) years of progressive experience in electric utility environment including at least six (6) years of direct experience in computer control systems, EMS and associated field equipment, system protection with emphasis on design and settings; and at least three (3) years of experience in a leadership or supervisory role with recruitment and selection, training and development and/or performance management accountabilities, • Working knowledge with Microsoft Office Professional Suite, including Word, Excel, Outlook, and PowerPoint, • Demonstrated ability to engage effectively with all levels within and outside of the organization., • Proven track record of providing leadership to meet established goals and foster an environment of continuous improvement and professional development. Technical Competencies/Skills: • Engineering and design principles and best practices, • Understanding of contract commercial terms and conditions language, • Translate engineering and design concepts into achievable operating solutions, • National Electric Safety Code, OSHA and appropriate State of Florida rules, DOT, Environmental, RUS, FERC, and NERC, • EMS management & maintenance, • NERC CIP and O&P standards knowledge, • Application development, • Relational database, • Control systems data networks & protocols, • APEN and/or PSSCAPE for Fault Analysis, • AcSELerator 5010 SEL, GE URPC software, • Employee training and development, • Effective verbal/nonverbal, listening, and written communications, • Effective supervision, performance management and talent development, • Leadership, • Planning & Organizing, • Problem Solving, • Analytical, • Organization, • Strategic Thinking Physical Requirements Must be able to follow established protective measures including wearing required personal protective equipment (PPE). Must possess a valid driver’s license and acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. Occasional travel to various locations in state and out-of-state to visit job sites and attend meetings with consultants and equipment suppliers is required. While working in certain areas of the plant there is the potential for exposure to hazards typical of an industrial working environment. Requires 24/7 availability and is subject to callouts at any time, which may include extended periods during inclement weather or other emergency conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job DescriptionBenefits: • Retirement Plan, • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Responsibilities • Develop and maintain software applications that handle data access, processing, and analytics., • Utilize strong Python coding abilities to build efficient and scalable solutions., • Implement and integrate data access layer technologies such as Databricks, iQuery, Global Search, API, and File Browser., • Collaborate with Data Scientists and Data Analysts to understand requirements and design efficient front-end solutions., • Develop user-friendly, visually appealing tools and interfaces that enable both technical and non-technical users to interact with data effectively., • Ensure the security and integrity of data through the implementation of appropriate access controls and encryption mechanisms., • Work closely with stakeholders to gather requirements, provide technical guidance, and deliver high-quality solutions., • Secret clearance (can be sponsored)., • Minimum of 2 years of experience as a Software Engineer or Full Stack Developer, with demonstrated experience supporting, maintaining, and documenting software functionality., • Minimum 1 year of experience with programming data entry and complex display applications using React., • Minimum 1 year of experience with programming applications to run in a Web environment comprised of Docker Node containers., • Proficient with essential front-end technologies like HTML5, CSS3, TypeScript, and JavaScript., • Knowledgeable of third-party libraries like React.js, Node.js, Sequelize, jQuery, Angular, and PyTorch., • Experience with Node.JS programming at scale or Cloud and GUI design and development., • Strong proficiency in Python and SQL coding. Experience with SQL and writing SQL queries, specifically creating complex data retrieval queries and transactional data updates., • Experience with SQL databases like MySQL and PostgreSQL., • Experience with CI/CD pipelines, especially GitLab., • Experience with APIs, especially REST or RPC architectural styles., • Experience with secure coding practices, including Static Code Analysis, Container library analysis, or STIGs., • Experience with cloud services, particularly AWS including Amazon S3., • Experience with automated testing tools to perform testing and maintenance., • Strong problem-solving skills and ability to work in a fast-paced, dynamic environment., • Excellent communication and collaboration skills, with the ability to work effectively with cross-functional teams., • Detail-oriented mindset with a commitment to delivering high-quality results., • Must be in the DC Metro area and available to work onsite (Crystal City, VA and Alexandria, VA) as needed., • Compensation - We carefully consider a wide range of compensation factors, including but not limited to prior experience, skills, expertise, location, and other considerations permitted by law., • Healthcare - We offer Health, Vision, and Dental Plans for our employees and their families., • Retirement Plan We invest in your future with a competitive 401(k) plan, where we match 100% of your contributions up to your first 6% and give you access to Vanguard Admiral funds., • Paid Time Off - Based on length of service, we offer a generous amount of paid leave., • Bonus System As you invest in us, we invest in you. We offer bonuses to all employees who meet and exceed goals throughout the year., • Professional Development Support for career growth through training programs and certifications., • Company Retreats & Team Events Sponsored trips, team-building activities, and annual conferences related to your skillset. Flexible work from home options available.

Job Description Hotel Chief Engineer Introduction Welcome to Thind Management, a family-owned management company where we strive to provide exceptional service and unforgettable experiences to our guests at our properties. With a passion for hospitality and a commitment to teach, we at Thind Management strive to share our knowledge with team members to reach new heights. We live and breathe Thind’s motto “We’ll Take It from Here”. Our team of experienced leaders are dedicated to delivering the highest standards of training, providing tools, and ensuring professional growth of our team members. Job Summary We are seeking a motivated hotel Chief Engineer with a positive attitude and willingness to teach. One who is responsible for overseeing the maintenance and repair of the hotel’s physical infrastructure, including its mechanical, electrical, plumbing, and HVAC systems. They ensure the proper functioning of all equipment, supervise the maintenance staff, and coordinate with other hotel departments to maintain a safe and comfortable environment for guests and employees while following company and brand standards. Core Job Responsibilities & Duties • Greets guests immediately with friendly/sincere acknowledgement throughout the hotel, • Understand and follow company and brand standards, • Develop and implement a comprehensive maintenance program to ensure the efficient operation of all systems and equipment in the hotel, • Must conduct regular inspections, perform preventative maintenance, and coordinate repairs as needed, • Manage a team of maintenance technicians and ensure they are properly trained, motivated, and equipped to carry out their duties, • Provide guidance, support, and performance feedback to ensure the highest level of productivity and professionalism, • Oversee the installation, operation, and maintenance of all mechanical, electrical, plumbing, and HVAC systems in the hotel, • Ensure elevators, fire safety systems, generators, water heaters, and other essential equipment are always operating, • Develop and manage the maintenance department’s budget, including equipment purchases, repairs, and maintenance contracts, • Monitor expenses and implement cost-saving measures without compromising quality and safety standards, • Ensure compliance with all relevant building codes, safety regulations, and environmental policies, • Conduct regular safety inspections, maintain accurate records, and address any issues promptly to minimize risks and liability, • Plan and oversee major renovation or construction projects within the hotel, • Collaborate with architects, contractors, and vendors to ensure tasks are completed on a timely manner while adhering to budgetary constraints, • Foster effective communication and collaboration with other hotel departments to address maintenance needs, coordinate repairs, and minimize disruptions to guests, • Provide technical guidance and support to other departments as needed, • Ensure that all cleaning equipment & supplies are used and stored properly Qualification Standards & Company Requirements • Ability to work efficiently and independently in a fast-paced environment, • Ability to tolerate environmental factors such as humidity, cold/heat, dust and noise., • Excellent leadership, problem-solving, and decision-making skills required, • Strong organizational and project management abilities, • Knowledge of safety regulations and building codes, • Physically able to work from ladders, move furniture, operate cleaning equipment, and tolerate exposure to general cleaning chemicals, • Several years of experience in a supervisory role within the hotel or hospitality industry required, • Strong knowledge of building systems, including mechanical, electrical, plumbing, and HVAC required, • Proficient in reading and interpreting technical drawings and specifications, • Proficient in using computerized maintenance management systems (CMMS) and other relevant software(s) as required by hotel, • Ability to work a flexible schedule, including weekends and holidays, • Bachelor’s degree in engineering or a related field; professional certification or licensure preferred Powered by JazzHR 52rNNmFWSA

Job Description Position Summary Description Demonstrates a high degree of technical knowledge to independently perform maintenance activities in a manner that will ensure the safe, efficient, reliable, and regulatory compliant operation of Seminole generating plants and transmission infrastructure, including substation major equipment, SCADA systems, RTUs, metering systems, telecommunication equipment and protocols, protection and control protective relaying systems and other associated equipment. Executes work activities involving a high degree of complexity with respect to technical engineering concepts, tools and analysis that are required in troubleshooting, calibrating, repairing, testing, and investigating operations or failures of systems components and equipment. Oversees and leads all phases of field troubleshooting, testing, and commissioning of projects associated with Seminole's high-voltage transmission infrastructure couple with the field technical support to Seminole’s generation plants. Provides technical support to various phases of capital and expense project life cycle that include project's conception, design and specification, estimating, scheduling, construction, and project closeout. May provide contractor management oversight during construction of capital projects and project management accountabilities for maintenance projects. Essential Functions • Develops and implements commissioning and maintenance test plans that are safe, effective, and efficient at meeting regulatory compliance requirements, corporate standards, corporate guidelines, industry standards, and industry best practices., • Performs operational checks and tests on various generation and substation facilities, including but not limited to, power circuit breakers, transformers, instrument transformers, disconnect switches, motor operators, battery systems, protective relaying system and equipment, SCADA systems, RTU’s, metering systems, power line carriers, wave traps and tuners., • Performs preventive, corrective, and emergent maintenance on substation equipment, protective relaying systems, SCADA systems, RTU’s, metering systems and associated equipment., • Operates and interprets readings from test equipment such as digital multi-meters, insulations testers, protective relay test sets and radio frequency measurement equipment to facilitate problem identification and/or safe operations., • Leads the investigation of operational incidents and/or equipment failures to determine root cause, recommended corrective actions, and mitigation measures., • Reviews and monitors applicable NERC PRC standards and ensure requirements are being satisfied, including RSAWs and documenting of evidence., • Provides technical guidance and oversight to Relay Technicians, SCADA Technicians, and Substation Technicians on protection and control, SCADA, and metering matters., • Supports the development of technical specifications of major electrical equipment, electrical components, RTUs and protective relaying systems., • Supports the request for proposal and/or sole sources process for system maintenance initiatives via proposal development, bid review and selections., • Monitors and evaluates emerging and recent technologies for application and integration by Seminole., • Prepares, reviews, and verifies substation and switchyard design for transmission and generation assets., • Tests and verifies that wiring of various substation control schemes is completed in accordance with construction design prints and achieve desired results., • Supports the maintenance leadership team in budgeting, cost estimation, quality assurance, quality control, and training., • Performs project management on System Maintenance projects., • Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM., • Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements Bachelor of Science degree in Electrical Engineering from an ABET accredited institution is required. Advanced degree in engineering preferred. Fifteen (15) years of progressively responsible power system industry experience that spans across generating plant and transmission environments and includes transformers, power circuit breakers, disconnects, and various control schemes. Field experience troubleshooting, testing, commissioning, and maintaining electrical systems, components, and equipment is required. Professional Engineer (PE) License is a plus. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Engineering Design, • Specifications/Request for Proposals, • Procurement, • Project Planning, • Quality Control, • NERC Compliance with PRC Standards, • National Electric Code, Safety Codes, OSHA Rules, and appropriate Florida and RUS standards and rules, • Transmission and generation relay setting principles and standards, • IEC 61850, • AcSELerator 5010 SEL, GE URPC software, • Effective verbal/nonverbal, listening and written communications, • Initiative-taker/self-motivated, • Leadership, • Focus on Quality, • Multi-tasking, • Risk Management, • Project and time management, • Organization, • Innovative and Always Learning, • Detailed Oriented, • Analytical and Problem Solving, • Collaborator, • Safety Focus and Oriented Physical Requirements Must be able to follow established protective measures including, wearing required personal protective equipment (PPE). Must possess an acceptable Motor Vehicle Report. Must be able to lift fifty pounds. Working Conditions Some travel, overnight stays, and work outside of normal business hours to existing and future transmission facilities, substation and generator sites as required. While working in certain areas of substations and/or switchyards, there is the potential for exposure to hazards typical of an industrial working environment. Work is outdoors with frequent travel away from the office environment. While working in certain areas of generation facilities, there may be extreme temperatures and conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description Paragon Cyber Solutions has an immediate opening for a Database Engineer. Clearance Active TS/SCI Security Clearance Required Essential Duties and Responsibilities The Database Engineer will provide onsite support at HQ USSOCOM to maintain and sustain all instances of the DefenseReady Enterprise Server Application and NIPR to SIPR one way guard. The database engineer will be responsible for the enterprise server maintenance and database administration support. • Responsible for developing and translating computer algorithms into prototype code and maintaining, organizing, and identifying trends in large data sets., • Design SQL databases., • Create process documentation., • Code in Python, Java, Kafka, Hive, R, or Storm., • Oversee real-time business metric aggregation, data warehousing and querying, schema and data management, and related duties., • Design, develop, and test state-of-the-art Cloud-based database platforms. Implementation and maintain complex databases., • Analyze procedures to control the access and allocation of data., • Experience as a Database Administrator and/or Database engineer., • Experience with design, development, and implementation of structured and unstructured databases. Experience with DDL scripts to create, maintain, and upgrade database schemas., • Experience with SQL and PL/SQL to perform complex queries, data manipulations and data migrations., • Experience writing and maintaining shell scripts; additional experience with R, Python, Java is helpful., • Recommended Experience Database design and implementation using cloud-based technologies (AWS, GCP, Azure) and respective database services. Note: Some travel to TSOCs and Components may be required to ensure task execution and reporting. Benefits • Health Care Plan (Medical, Dental & Vision)., • Retirement Plan (401K w/ employer matching)., • Paid Time Off & 10 Paid Public Holidays., • Short and Long-Term Disability., • Healthy Work-Life Balance. You want to make a difference. You want to be recognized by name versus being a number. You want to work with a company where you can grow and work in different areas to increase your knowledge/experience. You have an entrepreneurial spirit and need to live it. As a small business, each team member rolls up their sleeves and helps where needed (including our CEO). Our ideal candidate will be comfortable with multi-tasking and prefers working in a fast-paced, dynamic environment. You must be adaptable to the needs of a growing business. A Model of Excellence That’s our motto in all we do and what we seek in our team members. Are you a hardworking professional seeking a new opportunity that fosters growth? Look no further! We are an award-winning, minority, woman, veteran-owned, 8(a), EDWOSB, VOSB, Tampa, FL-based small business. We pride ourselves on delivering high-quality solutions that help our clients protect the integrity of their business operations.

Job Description Join the Mission at U.S. Central Command (CENTCOM) Be part of the team supporting one of the most visible and impactful combatant commands in the world. At CENTCOM, your work directly supports global operations, national security, and the warfighters on the front lines. This is more than just a job. This is a chance to apply your expertise in a mission driven environment with real world impact. Venatore is seeking a ServiceNow Systems Engineer (Duty Title: Chief Technologist) to support the development, test, and production environments of ServiceNow for the USCENTCOM Information Technology Services (CITS) Program. This position is based in Tampa, FL, and provides both operational and project-based support to USCENTCOM J6. Duties and Responsibilities: • Responsible for ServiceNow system maintenance, workflow development, bug fixes, enhancements, upgrades and assisting with the technical implementation of the tool., • Experience implementing ServiceNow system solutions in a Linux environment., • Proven ability and knowledge of ServiceNow integrations with other systems., • Experience implementing and supporting ITOM and ITAM applications to include discovery, asset management, service mapping pattens, and event management., • Monitor systems stability to prevent service degradation or interruption. Conduct risk assessments to identify potential gaps., • Knowledge and experience supporting relational databases such as MariaDB to include installation, optimization, indexing and coding., • Assist with the configuration and maintenance of ServiceNow Strategic Portfolio Management (SPM) modules with expertise in Agile Development along with Demand, Project, Portfolio, and Resource Management., • Develop dashboards, KPIs, and reports to provide visibility into portfolio performance, risks, and opportunities. Additional Responsibilities: • Work with the CSI Lead and evaluate impacts of recommended initiatives and projects and drive delivery of advanced ITSM processes and tooling solutions that meet the customers’ use cases, • Assist in delivering best practices for the Enterprise to include ITIL, Agile, PMBOK frameworks for delivering IT Services, • Maintain customer relationships in support of lifecycle replacement of IT hardware for the entire IT Enterprise, • Work directly with end users to resolve support issues within ServiceNow, • Configure application related fields, forms, views, email notifications, acceptance roles and access control, • Modify and/or customize the core applications such as Incident, Problem, Change, Requests, Service Catalog while applying best practices., • Provide support to end users and stakeholders on SPM functionalities and best practices., • Consistent and regular attendance is an essential function of this job, • Performs other related duties as assigned. Desired: • ServiceNow ITSM Implementer certification, • Java script, html, or CSS experience, • Skilled in utilizing best practice engineering methods, • Demonstrated knowledge of incident management, problem management, change management, Knowledge management as well as request fulfillment, • Hands-on experience with ServiceNow HTML, CSS, Angular JS, Jelly scripts and Restful API webservices. Education and Certifications: Required: • Bachelor’s Degree with a focus in computer science, information systems, or a related field of study and at least 5 years of experience, • Possess 3-5 years' experience as ServiceNow Systems Engineer, • ServiceNow Certified System Administrator certification and/or ServiceNow Certified System Engineer, • ITIL v4 Foundation Certification, • Applicable DoD 8140 or DoD 8570 Certification Clearance Requirement: • Active Secret with possible TS/SCI Travel Requirements: • May be required to travel up to 10% during the year to support USCENTCOM Exercises including OCONUS Locations

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As a Lead Engineer, you will primarily support our Civil Department with land development and civil engineering practices for electrical substations and transmission line right-of-way. This role will also play a pivotal part in developing and growing our Civil Department in other regional offices. What You Will Be Doing: * Oversight of electrical substation civil design including permitting support, site layout, grading design, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support * Review civil construction specifications, cost estimates, engineering proposals, and project schedules * Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection * Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design * Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion What You Bring: * Bachelor’s in Engineering (required) * Professional Engineer (PE) certification (required) * 10+ years of related engineering experience, whether through consulting or working for an electric utility (required) * Project management experience (preferred) * Extensive knowledge of the fundamentals of managing project scopes, schedules, and budgets * Experience in civil design work experience related to: 69kV/115kV/138kV/230kV/345kV/500kV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing (highly preferred) * Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs) * Understanding of basic practices for evaluating engineering and design issues * Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly * Ability to work in a safe manner and always obey safety regulations * Effective communication skills (verbal, written, and presentation) * Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders * Ability to use a collaborative approach when working with peers or clients * Demonstrate a high level of comfort with sharing knowledge freely * Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects * Strong attention to detail and ability to work in a team environment &/or independently * Ability to think creatively as it relates to engineering innovation and solutions * Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment * Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy So...Why Join Us? You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description RedSky is seeking a highly skilled ServiceNow Systems Engineer to support the development, testing, and production of ServiceNow environments for a large, mission-driven Information Technology Program. This position is based in Tampa, FL, and offers the opportunity to deliver enterprise-level ServiceNow solutions in support of a high-impact federal customer. Key Duties and Responsibilities • Perform ServiceNow system maintenance, workflow development, bug fixes, enhancements, upgrades, and technical implementation., • Implement solutions in a Linux environment and manage ServiceNow integrations with external systems., • Support IT Operations Management (ITOM) and IT Asset Management (ITAM) applications, including discovery, asset management, service mapping, and event management., • Monitor and maintain system stability, analyze and address potential risks to prevent service interruptions., • Implement, optimize, and maintain relational databases such as MariaDB., • Configure and maintain ServiceNow Strategic Portfolio Management (SPM) modules, delivering expertise in Agile development, project, portfolio, demand, and resource management., • Develop dashboards, KPIs, and reports to provide visibility into IT portfolio and service performance., • Collaborate with the Continual Service Improvement (CSI) lead to evaluate new initiatives and implement advanced ITSM processes., • Apply best practices from ITIL, Agile, and PMBOK frameworks in enterprise IT service delivery., • Maintain strong customer relationships and support lifecycle management of IT hardware across the enterprise., • Provide end user support and training on ServiceNow modules and best practices., • Configure ServiceNow application fields, forms, views, notifications, roles, and access controls., • Modify and customize core applications, such as Incident, Problem, Change, Requests, and Service Catalog., • Offer consistent, regular attendance and perform related duties as assigned.Desired Qualifications, • ServiceNow ITSM Implementer certification (preferred), • Experience with JavaScript, HTML, and CSS, • Knowledge of incident, problem, change, request, and knowledge management, • Hands-on experience with ServiceNow scripting (HTML, CSS, Angular JS, Jelly scripts, RESTful APIs), • Skilled in best-practice engineering methodsRequired Education and Certifications, • Bachelor’s degree in Computer Science, Information Systems, or a related field, • Minimum 5 years of relevant professional experience, • 3–5 years of specific experience as a ServiceNow Systems Engineer, • ServiceNow Certified System Administrator and/or ServiceNow Certified System Engineer, • ITIL v4 Foundation Certification, • Applicable DoD 8140 or DoD 8570 certificationSecurity Clearance Requirement, • Must possess an active Secret security clearance (TS/SCI eligibility preferred).Travel Requirement, • Up to 10% travel annually, including support for OCONUS (Outside Continental U.S.) locations as required.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Growing Ocala, FL based, publicly traded construction company is looking for a LEAD relay technician (with 10+ years of experience) and a SENIOR relay technician (with 7+ years of experience.) The ideal candidate will be able to: Apply / exhibit a high attention to detail with regard to safety and human performance. Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant. Perform relay panel risk assessments daily and apply human performance barriers as needed. Develop functional guidelines with an emphasis on human performance principles. Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses. Maintain and control proper use of Duke Energy issued TCA secure laptop. Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes. Apply approved LV control cable and fiber optic safe work practices. Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings. Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues. Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator. Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job. Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers. Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel. Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc... Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests. Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All as-left relay testing documentation will be saved and submitted to RCE. Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles. Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device. Relay technicians should have fiber optic splicing and termination abilities with CFOT certification. Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers. Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center Functionally test all relay and control circuits to verify proper operation during simulated fault conditions. Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center. Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment. When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment. Take In-Service readings of all new equipment as primary load is first applied. Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting. Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person. Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have. Schedule a meeting with the project engineers, if needed, to go over lessons learned. Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience

Job Description Position Summary Description Accountable for the testing, commissioning and maintenance of substation and associated equipment in a manner that ensures the safe and reliable operation of generations and substation facilities. Develop and prepare commissioning and maintenance test plans that are effective and efficient at meeting regulatory compliance requirements, corporate standards, and guidelines in addition to industry standards and best practices. Work activities involve a high degree of complexity with respect to technical engineering concepts, tools and analysis that are required in troubleshooting, calibrating, repairing, testing, and investigating operations or failures of systems and equipment. May provide direction and technical support to technicians and specialists as needed Essential Functions • Perform operational checks and tests on various substation facilities including but not limited to Power Circuit Breakers, Transformers, Instrument Transformers, Disconnect Switches, and Battery Systems, • Verify wiring construction work is performed in accordance with detailed design print documentation, • Troubleshoot and perform preventive, corrective, and emergent maintenance on substation equipment, • Manage assigned capital and expense substation projects from project approval through project closeout. Operate and interpret readings and test data from test equipment, • Document all completed work in accordance with regulatory requirements, corporate guidelines, and corporate procedures, • Know and follow safe behaviors including all applicable safety rules and procedures, • Provide technical guidance and directions to Senior Substation Technician, Senior Relay Technician and/or Senior Test Specialist., • Prepare, review, and verify maintenance test plans, • Serve as Subject Matter Expert (SME) with compliance of assigned NERC Reliability Standard, • Support the maintenance of inventory for Substation components for facility ratings purposes, • Participate in the investigation of operational incidents and/or equipment failures that may lead to reportable events., • Perform sequence of event review, analysis of recorders and logs to perform root cause analysis to develop recommendations and corrective actions to mitigate future occurrences., • Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM., • Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements Bachelor’s degree in electrical engineering from an ABET accredited institution. Minimum of six (6) years of experience in engineering, testing, maintenance and/or operations of electrical systems or equipment in a plant or substation environment. A master’s degree or registration as a Professional Engineer (PE) will equate to one (1) year of experience. Demonstrated organizational, time management and leadership skills. Experience with Power Circuit Breakers, Transformers, Instrument Transformers, Disconnect Switches, and Battery Systems. Experience in managing substation maintenance projects. Professional Engineer (PE) License is a plus. Field experience testing and maintaining electrical systems and equipment. Core Competencies: Adaptable, Collaborative, Conscientious, Critical-Thinking, Outcome-Driven and Professional Technical Competencies/Skills: • Electrical Principles, • Electrical and Control Drawings and Schematics, • Electrical Troubleshooting, • Substation Construction/Equipment, • SCADA/RTUs/Communication Systems, • Test Equipment and Procedures, • NESC/OSHA, • Project Management, • Effective verbal/nonverbal, listening and written communications, • Innovative and Always Learning, • Detailed Oriented, • Self-Starter and Take Initiative, • Analytical and Problem Solving, • Multi-Tasking – multiple assignments and demands, • Safety Focus and Oriented Physical Requirements Must be able to follow established protective measures including wearing required personal protective equipment (PPE). Must possess a valid driver’s license and acceptable Motor Vehicle Report. Working Conditions Work is outdoors with frequent travel away from the office environment. Must be available to work outside normal business hours and occasionally stay out of town. While working in certain areas of generation facilities, there may be extreme temperatures and conditions. While working in substations there are the potential for exposure to hazards typical of a utility working environment. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job Description CNC Lathe/Mill Programmer and Machinist Lightning Bay PneuDraulics is a well-established Industrial, Marine and Mining Maintenance, service company, Specializing in Hydraulics. We have an immediate career opening for a CNC Lathe/Mill Programmer and Machinist Come join a winning team in Tampa! We are looking for an experienced CNC Lathe/Mill Programmer and Machinist. We are a Full service Hydraulic and Mechanical Repair company. We specialize in Hydraulic repair and manufacturing. The perfect candidate must be highly experienced with Haas CNC machine tools and Fusion 360 software. We service some of the largest Ships, Amusement Parks, Mining operations and manufacturing companies in the world. This individual must be capable and comfortable designing and manufacturing products that are up to the quality and standard that we are known for. Roles and Responsibilities · Use Fusion 360 for Drawing and Programming of Haas Lathes and Mills · Draw new parts as required · Reverse Engineer parts as required · Create NC Programs for Lathes with Y-Axis/Live Tooling and Mills with 3, 4 and 5 Axis · Perform Set-Up and Fixturing as required · Run Programs and Operate machines as required Qualifications and Experience · 10+ years Experience with Programming Using CAD/CAM Systems · Must be highly proficient with Fusion 360 · Must be highly proficient with Haas Control and Machines · Must be highly proficient with Y-Axis & Live Tooling · Must be highly proficient with 4 & 5 Axis Milling WHY YOU'LL LOVE WORKING FOR US (OUR BENEFITS) · Competitive salary, based on experience and qualifications · Full medical, dental and vision coverage · Retirement savings account with a company match · Long and short term disability · Paid vacation and paid sick time · Uniforms and uniform laundry Hiring Company Description: Lightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based in Tampa, FL. We provide shop and field service to our customers to troubleshoot, install, remanufacture, and design fluid power systems and components. Our shop capabilities include full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing. Company DescriptionLightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based out of Tampa, FL. We provide shop and field service to our customers and troubleshoot, install, remanufacture, or design fluid power systems and components. Our shop capabilities includes full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing.Lightning Bay Pneu-Draulics is a leading provider of Industrial and Marine Hydraulic Services. Based out of Tampa, FL. We provide shop and field service to our customers and troubleshoot, install, remanufacture, or design fluid power systems and components. Our shop capabilities includes full machining and fabrication and the ability to remanufacture and test equipment for our customers. Some industries that we serve include: marine, mining, manufacturing, fertilizer and chemical, food and beverage, and metal processing.

Job Description Pickett and Associates, LLC, an ESP Company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As a Lead Engineer, you will provide leadership and senior-level engineering/technical expertise on complex electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. Some of the main responsibilities will be to ensure the team is meeting client requirements; both quality and schedule deadlines, as well as ensuring the team is engaged and their input is valued. We want to inspire our team members to produce at the level of excellence for which Pickett is known. This role will require you to be hands-on and manage, prepare, review and/or provide guidance for line routing, survey coordination, PLS-CADD modeling, structure design, foundation design, clearance checks, plan/profile development, material specification and procurement, constructability evaluations, work order package preparation, permitting, vendor/subcontractor coordination and construction support. Responsibilities: • Supervise a team of engineers, technicians, and drafters, • Communicate clear expectations, goals, and vision, • Manage the performance of the team and delegate project work, • Motivate, coach and mentor team members, • Manage projects, ensure quality of work and on-time delivery, • Review and approve engineering design submittals, • Develop lasting relationships with clients, • Bachelor’s degree in Engineering (required), • Professional Engineer (PE) certification (required), • 10+ years of related transmission line engineering experience in the electric utility industry (required), • Extensive experience using PLS-CADD (required), • Extensive experience with design codes and standards such as: NESC, IEEE, ASCE and ACI, • Extensive experience liaising with substation, environmental, real estate, construction, and maintenance stakeholders, • Deep understanding of industry standards and methods (engineering, procurement, and construction), • Strong project management skills and experience, • Ability to work in a safe manner and always obey safety regulations, • Adept self-starter who thrives in an unstructured, varied and deadline-driven work environment, • Strong leadership skills and ability to coach other team members and provide direction for projects, • Strong ability to collaborate with team members as well as peers in the electrical utility industry, • Effective business and technical communication skills (verbal, written and presentation) You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description BSA designs facilities that support, enhance and inspire healing, learning and discovery. Facilities that are LifeStructures. Our integrated disciplinary efforts with visionary healthcare, higher education and research clients achieve measurable outcomes through metrics-driven design solutions. Together, we create inspired solutions that improve lives. We are searching for a Senior Electrical Engineer to join our team in our Tampa studio! What You'll Do: • Establish project design approach for specific discipline at project start up., • Lead client management; attend client, consultant, and design committee meetings., • Presents design to client and coordinates with other disciplines and consultants., • May be involved in project/client pursuits., • Manage project specific scope, budget and schedule. Participates in all design and construction phases of projects., • Manages teams and assists other project team members in the development and maintenance of workplans., • Participates in project debriefs and lesson’s learned sessions., • Leads in planning, design and documentation of projects. Prepares working drawings and stamps drawings. Oversee development of fully coordinated quality design documents., • Communicates and improves some design processes with other team members., • Recommend and implement alterations to design to improve quality., • Educational Background: Bachelor's degree or Professional degree in Electrical or Architectural Engineering., • Experience: 8+ years of applicable experience. Experience within healing, learning and/or discovery market sectors preferred., • Licenses/Certifications: Professional Engineer (PE) Licensure preferred., • Software Skills: Revit, SKM Power Tools - Electrical System Analysis, Various lighting design software. At BSA, we empower our team members to make a meaningful impact. As a 100% employee-owned firm, you'll have a direct financial stake in our growth and success while benefiting from a collaborative and innovative environment. Join us and be part of a team dedicated to creating spaces that support healing, learning, and discovery. Exceptional Benefits We offer a comprehensive benefits package including: • Medical, dental, and vision coverage, • Flexible Time Off (FTO), • Parental leave, • Hybrid work schedule, • Paid volunteer time and a giving back Program, • Employer-matched retirement funds and Employee Stock Ownership Plan (ESOP) Our core values define us: • Partners: Our employee-owners value team success as well as individual success., • Purposeful: Our experts are solution oriented, creating inspired solutions in healing, learning, and discovery environments., • Learners: We are constantly striving for expertise and sharing knowledge., • Owners: We are committed to a culture of empowerment; thinking and acting like employee-owners to ensure the success of our clients and our business. BSA is an Equal Opportunity Employer.

Job DescriptionOur busy hotel is seeking an energetic, customer-oriented maintenance engineer to ensure that all of our visitors have an excellent experience at our property. You'll be in charge of the building's maintenance and preventative programs daily to ensure people's enjoyment, health, and safety. The ideal candidate for this position will be an outstanding communicator, a team player, and, above all, someone who enjoys engaging with new people. If you're ready to get started, apply today!Compensation: $15 - $17 hourly Responsibilities: • Create an available channel of communication between you and other staff, including managers and department heads, • Handle maintenance issues as quickly as possible to assure guest satisfaction, • Follow all engineering safety rules and regulations, • Tend to all of the hotel's equipment and conduct preventive maintenance routines, • Operate various tools like wrenches, hammers, screwdrivers, drills, and other maintenance equipmentQualifications:, • Applicants must have 2-4 years of experience in maintenance, • The ability to lift and carry 50 lbs. or more is required, • A high school diploma or equivalent GED is required, • Valid driver’s license and good driving record required, • Excellent organizational, interpersonal, and communication skills are necessaryAbout Company Off I-275, we’re three miles from Tampa International Airport and six miles from Port Tampa Bay Cruise Terminal. Get to the airport, mall, and more with our free shuttle. Daily hot breakfast is free, and we’ve got plenty of restaurants within walking distance. Perks include our free WiFi, outdoor pool, and fitness center.

Job Description Position Summary: The Clinical Informatics EHR Administrator is responsible for the administration, configuration, maintenance, and optimization of clinical applications used across the organization, including but not limited to iScribe, Athena, Incisions, Efferent and Relatient. This role ensures the reliability, integrity, and performance of clinical systems that support patient care delivery, provider documentation, scheduling, and communication. The Engineer collaborates closely with the clinical team, CIS, IT, and operational stakeholders to ensure that systems are aligned with workflow needs and regulatory requirements. Qualifications: • Bachelor’s degree in Health Informatics, Information Technology, Computer Science, or a related field preferred., • 3+ years of experience supporting clinical applications in a healthcare environment., • Strong working knowledge of one or more systems such as iScribe, Athenahealth, Incision, Relatient, or equivalent platforms., • Proven experience with system configuration, testing, updates, and end-user support., • Excellent analytical, troubleshooting, and communication skills., • Ability to collaborate across clinical and technical teams and translate clinical needs into system requirements., • Serve as the primary owner and subject matter expert for designated clinical systems (e.g., iScribe, Athena, Incision, Efferent, Relatient)., • Perform system configuration, customization, and maintenance in accordance with clinical workflow requirements and vendor recommendations., • Lead and coordinate routine system updates, upgrades, patches, and releases in collaboration with vendors and internal stakeholders., • Identify and resolve system issues, perform root cause analysis, and implement preventative measures to minimize disruptions., • Conduct regular system clean-up, data validation, and optimization efforts to maintain system performance and integrity., • Maintain system documentation including configuration records, workflows, access controls, SOPs, and change logs., • Collaborate with Clinical Informatics team members and IT to test and validate system changes and new functionalities., • Work with clinical end-users to gather requirements, provide technical guidance, and ensure effective system utilization., • Support onboarding and training efforts by ensuring systems are configured for new users and updated to reflect organizational changes., • Monitor system performance and usage trends; generate reports and analytics to support decision-making and system improvements., • Participate in vendor relationship management including support ticket escalations, feature requests, and service reviews., • Ensure all systems are compliant with security, privacy, and regulatory standards including HIPAA.

Job Description Position Overview: The Senior Project Engineer is responsible for identifying and implementing improvements to current manufacturing processes at Gopher Resource’s two secondary lead smelting plants. Projects will involve detailed mechanical design, project timeline management, coordination with internal trades and external contractors, and on-site installation support. Projects will often be multi-phase process overhauls with multiple installations. Must have the ability to evaluate data and make meaningful first-hand observations in an industrial environment. Must be able to work effectively across multidisciplinary teams at multiple manufacturing sites. Critical Success Criteria: • Applies sound engineering principles to the design of manufacturing equipment., • Develops working knowledge of existing processes and leverages both internal and external subject matter expertise to advance projects., • Effectively leads equipment design projects by providing technical expertise, creating and/or reviewing designs, and managing project deliverables through commissioning., • Works safely in lab and manufacturing environments and sets an example by following EHS procedures and looking for opportunities to keep all employees safer., • Identifies, evaluates, and implements new technology into the manufacturing process. Responsibilities: • Develops mechanical and process designs for new equipment, with support from internal or external resources as needed., • Develops installation specifications and commissioning plans for new equipment. Supports installations on-site., • Organizes and manages multiple projects to assure high quality and timely service to all internal and external customers., • Updates documentation (P&IDs, PFDs, equipment drawings etc.) based on field verifications of current equipment and equipment modifications or replacements. Makes updates personally or provides redlines to drafting resources., • Works closely with the plant Process Engineers, Reliability Engineers, Maintenance Engineers, and department managers/supervisors. Solicits input and builds consensus for upcoming changes., • Conducts cost analysis weighing the pros/cons of various options and the impact to plant operations. Manages project costs., • Attends consortium meetings, conferences, vendor presentations, and training courses to gather information about opportunities for improvement., • Performs and documents equipment trials and/or experiments as needed to determine if proposed solutions are viable., • Works with the Training Department to develop training for new equipment installations or process changes., • Responds promptly and effectively to the needs of the business., • This position reports to the Applied Technology Manager. Requirements: • Bachelor’s Degree in Mechanical Engineering or a closely related discipline from an accredited College or University., • A minimum of 10 years of progressive experience in an engineering role in a manufacturing, industrial research and development, or military environment., • A minimum of 3 years of experience with developing specifications and installing custom equipment in partnership with equipment fabricators and multidisciplinary on-site contractors (millwrights, pipefitters, electricians, etc.)., • Previous experience working with equipment fabricators and machine shops for fabrication of complex equipment assemblies and parts., • Previous experience working with engineering specialists such as engineering designers, Structural Engineers, engineering modeling specialists (CFD, FEA etc.), instrumentation experts, etc., • Previous experience with 2D and 3D CAD software such as AutoCAD Inventor or SolidWorks., • Excellent verbal and written communication skills., • Ability to champion change, promote a positive team atmosphere, and sustain a continuous improvement culture., • Highly self-motivated and directed, ability to work well under pressure during time limited installation, sense of urgency, and attention to detail. Preferred Qualifications: • Previous experience with generating, updating, and organizing engineering documentation such as P&IDs, PFDs, and equipment drawings preferred, but not required., • Previous experience with project management software (Microsoft Project or similar) preferred, but not required., • Previous experience working in a mining and/or metals environment preferred, but not required., • Previous experience with gas fired furnaces and/or burner design preferred, but not required. Physical Requirements: • Willingness and ability to wear a full-face respirator mask directly against skin (e.g. clean shaven if applicable), work in a hot/high temperature production facility, and wear personal protective equipment (PPE) in designated areas with or without reasonable accommodation, • Willingness and ability to comply with safety protocols and company-provided decontamination measures which include utilizing private shower facilities upon leaving the plant environment with or without reasonable accommodation Compensation Information: Salary Range: $95,946 to $158,222. This position is also eligible for a short-term incentive plan which is determined by the achievement of strategic objectives. The market rate for the role is typically at the midpoint of the salary range; however, variations in final salary are determined by additional factors such as candidate qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Benefits: Gopher Resource is proud to offer a comprehensive benefits package that promotes the health, wellness, and financial security of our employees. List of benefit offerings include medical & pharmacy, dental, vision, health savings account (HSA), flexible spending account (FSA), dependent care spending account, life insurance, disability programs, telemedicine, parental leave, tuition support, legal insurance, identity theft protection, gym membership discounts, EAP, 401(k) with a company match, and paid time off (vacation, personal, bereavement, holidays). Gopher Resource is an Equal Opportunity Employer.

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Facility Services LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base salary range of $94K - $150K, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. As Accounting Manager - Regional Finance, you will partner closely with branch operations, regional finance, and shared services. This person will assume a lead role in ensuring a successful monthly and quarterly financial cycle, as well as safeguarding the Company’s assets, in compliance with the organization’s Code of Conduct and Ethics. This Position… Some examples of the work you might do includes: • Performs duties efficiently and effectively related to month end, and other financial responsibilities in alignment with standardized processes and procedures., • Ensures branch monthly/quarterly compliance with GAAP and SOX reporting compliance and testing standards., • Works with branch management to manage financial requests and issue resolution, • Actively participates in monthly project reviews, and works with branch operations and project teams to analyze project trends and inefficiencies, identify any risks, and help develop mitigation strategies., • Updates and reviews branch financial tools for monthly reporting during branch reviews and month end preliminary financials.Assists in the annual planning and monthly forecasting process by entering and reviewing expenses, backlog, and other financial data as needed.,, • Maximizes billing, drives collections, creates future week forecasts, and manages opportunities to maximize branch cash performance., • Ensures the accuracy and integrity of operational and financial information reported to financial leaders., • Collaborates with peers across the Region to drive continuous improvement of best practices, and ensure that both near and long-term strategies are devised on a fully informed basis., • Bachelor’s Degree in Business, Finance, Accounting, or a related field AND 4 + years of relevant, job-related experience OR 6+ years of relevant, job-related experience in the construction industry (without a degree)., • Well-rounded financial background, including experience with budgeting, forecasting, and interpreting financial data., • Strong communication (written and verbal) skills, analytical ability, and attention to detail., • Capacity to successfully execute job tasks in a fast-paced environment under limited supervision., • Previous financial experience in the construction industry., • Must have a valid driver's license., • Must have a driving record compliant with the Company's policies and MVR requirements, and consent to ongoing driving record monitoring by the Company., • Functional knowledge of the Work In Progress (WIP) schedule., • Viewpoint construction software experience., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates in a professional office environment, and routinely utilizes standard office equipment such as computers, phones, copiers, printers, and scanners., • In performing the duties of this job, the incumbent is regularly required to talk, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer. #LFS

Job Description MAS Environmental (A NOVA Engineering Company) is seeking a highly skilled and experienced Senior Environmental Project Manager to lead our FDEP Petroleum Restoration Projects (PRP). This role involves overseeing the design, operations, and maintenance of remedial systems to ensure compliance with environmental regulations and successful project outcomes. Responsibilities: • Lead and manage FDEP Petroleum Restoration Projects from inception to completion, ensuring all project goals are met within the specified timeline and budget., • Oversee the design and implementation of remedial systems, including site assessments, feasibility studies, and engineering designs., • Manage the operations and maintenance (O&M) of remedial systems, ensuring they function effectively and efficiently., • Ensure all projects comply with FDEP regulations and other relevant environmental laws and standards., • Mentor and develop junior engineering staff, fostering a collaborative and growth-oriented environment., • Maintain strong relationships with clients, providing regular updates and addressing any concerns or issues promptly., • Prepare detailed engineering reports, project documentation, and presentations for clients and regulatory agencies., • Bachelor’s degree in Environmental Engineering, Civil Engineering, or a related field. A Master’s degree is preferred., • Minimum of 7-10 years of experience in environmental project management, with a focus on petroleum restoration projects and remedial system design and maintenance., • Professional Engineer (PE) or Professional Geologist (PG) is highly preferred., • Strong proficiency in environmental engineering principles, remedial system design, and project management software., • In-depth knowledge of FDEP regulations and other relevant environmental laws and standards., • Excellent verbal and written communication skills, with the ability to effectively interact with clients, regulatory agencies, and team members. Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth. Currently, NOVA employs 650+ personnel in 19 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA’s facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent. NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law. #LI-JT

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About The Role: As the Civil Engineering Manager, you will primarily support our Civil Department with land development and civil engineering projects for electrical substations and transmission line right-of-way. This role will also play a pivotal part in developing and growing our Civil Department in other regional offices. What You Will Be Doing: • Manage all aspects of civil design including permitting support, site layout, grading design, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support, • Development of civil construction specifications, cost estimates, engineering proposals, and project schedules, • Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection, • Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design, • Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion, • Act as our “brand ambassador”, passionately representing our company both internally and externally, • Mentor Civil team members on the design and analysis of civil engineering concepts and software, • Manage Civil department resources and workload though project assignments, project updates, and (at a minimum) biweekly department meetingWhat You Bring:, • Bachelor’s degree in Engineering (required), • Professional Engineer (PE) certification (required), • 15+ years of related engineering experience, whether through consulting or working for an electric utility (required), • Project management experience (preferred), • Knowledge of the fundamentals of managing project scope, schedule, and budget, • Experience in civil design work experience related to: 69kV/115kV/138kV/230kV/345kV/500kV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing, • Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs), • Understanding of basic practices for evaluating engineering and design issues, • Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly, • Ability to work in a safe manner and always obey safety regulations, • Effective communication skills (verbal, written, and presentation), • Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders, • Ability to use a collaborative approach when working with peers or clients, • Demonstrate a high level of comfort with sharing knowledge freely, • Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects, • Strong attention to detail and ability to work in a team environment and/or independently, • Ability to think creatively as it relates to engineering innovation and solutions, • Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description Now hiring! We are seeking a Civil Engineering Manager for a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. This excellent opportunity can sit in Tampa, Orlando or Lakeland. As the Civil Engineering Manager, you will primarily support our Civil Department with land development and civil engineering projects for electrical substations and transmission line right-of-way. This role will also play a pivotal part in developing and growing our Civil Department in other regional offices. What You Will Be Doing: • Manage all aspects of civil design, including permitting support, site layout, grading design, retaining wall design, stormwater analysis, containment structure design, survey coordination, and civil construction support, • Development of civil construction specifications, cost estimates, engineering proposals, and project schedules, • Provide support for transmission line right-of-way access improvement design including culvert sizing, stormwater drainage analysis, stabilization specification, construction support, and inspection, • Assist with analyzing the design for various civil elements related to high-voltage power transmission and substation design, • Partner with clients, vendors, permitting agencies, and various other team members and stakeholders to see projects through to completion, • Act as our “brand ambassador”, passionately representing our company both internally and externally, • Mentor Civil team members on the design and analysis of civil engineering concepts and software, • Manage Civil department resources and workload though project assignments, project updates, and (at a minimum) biweekly department meetingQualifications:, • Bachelor’s degree in Engineering (required), • Professional Engineer (PE) certification (required), • 15+ years of related engineering experience, whether through consulting or working for an electric utility (required), • Project management experience (preferred), • Knowledge of the fundamentals of managing project scope, schedule, and budget, • Experience in civil design work experience related to: 69kV/115kV/138kV/230kV/345kV/500kV electrical substations and/or electrical switchyards including: site grading, drainage analysis, detention basin design, structural foundation, retaining wall design, geotechnical analysis, pavement design, SPCC design, SW3P design, wetland access roads, and security fencing, • Technical knowledge of design codes and software (Civil 3D, AutoCAD, MicroStation, and stormwater analysis programs), • Understanding of basic practices for evaluating engineering and design issues, • Mindset for developing better alternatives and recommendations related to the civil group (i.e.: structure, processes, software, etc.) with the ability to communicate and apply them accordingly, • Ability to work in a safe manner and always obey safety regulations, • Effective communication skills (verbal, written, and presentation), • Exposure to transmission, substation, environmental, right-of-way, construction, and maintenance stakeholders, • Ability to use a collaborative approach when working with peers or clients, • Demonstrate a high level of comfort with sharing knowledge freely, • Ability to identify relevant metrics and ability to apply them to the business, our clients, and projects, • Strong attention to detail and ability to work in a team environment and/or independently, • Ability to think creatively as it relates to engineering innovation and solutions, • Capacity to thrive in a fast-paced, entrepreneurial, and highly agile environment, • Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policyIf you meet these qualifications, please apply now!

Job Description Flexicrew Technical Services (FTS) is seeking a Technical Services Field Engineer – Variable Frequency Drives & Motors to support specialized VFD and control systems for large, medium-voltage motor drives in heavy industrial environments. This is a client-facing, field-based role with extended travel and performance incentives. Essential Duties: • Serve as the subject matter expert on VFDs, including closed-loop tuning and high-power, medium-voltage motor drives, • Troubleshoot, repair, and commission VFD systems at client sites, often in maritime crane or steel manufacturing environments, • Work from elevated platforms up to 250 feet when required, • Provide remote diagnostics and technical support when not on-site, • Collaborate with suppliers and clients to configure systems and resolve failures, • Maintain up-to-date service documentation, CRM entries, and detailed field service reports, • Train client staff on operation, maintenance, and safety procedures, • Participate in after-hours support rotations and extended site deployments, • Recommend value-add services and system enhancements, • Follow all safety standards and maintain relevant certifications, • Use a company-issued corporate card for travel and job-related expenses Requirements/Skills: • Bachelor's degree in Electrical, Mechanical, or related Engineering field, or equivalent experience, • Minimum 3 years of field engineering experience with VFDs, power conversion systems, and PLC integration, • Familiarity with PLCs from Toshiba, GE, Rockwell, and Mitsubishi Electric, • Proficiency in closed-loop control systems, diagnostics, and commissioning, • Strong interpersonal and communication skills for customer interactions, • Ability to work from heights and in challenging industrial environments, • Willingness to travel up to 50% or more, including international locations Preferred Qualifications: • 5+ years in technical services or field engineering roles in industries like maritime cranes or steel production, • Experience with legacy and modern VFD platforms (e.g., AC/DC2000, Innovation Series, etc.), • Knowledge of industrial communication protocols such as Modbus, Profibus, DeviceNet, etc., • Fluency in Spanish or Mandarin is a plus Physical Requirements: • Ability to climb and work at heights up to 250 feet, • Capable of lifting and maneuvering industrial equipment during service work, • Physically able to work in variable weather and site conditions during field assignments Compensation & Perks: • Base salary: $100,000 annually, • Uplift pay: Additional $20,000 for extended field deployments, • Five (5) weeks paid vacation, • Site bonuses and travel incentive pay, • Corporate credit card for travel and job-related expenses, • Spouse travel covered for assignments over six weeks Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Company DescriptionFlexicrew Technical Services (FTS) was founded in 2015 to meet the growing demand for technical and professional talent. We are a WBENC Certified executive and technical search firm providing custom-tailored staffing solutions and talent acquisition to the Gulf South Region and nationwide.Flexicrew Technical Services (FTS) was founded in 2015 to meet the growing demand for technical and professional talent. We are a WBENC Certified executive and technical search firm providing custom-tailored staffing solutions and talent acquisition to the Gulf South Region and nationwide.

Job Description A leading manufacturer is seeking a Process & Manufacturing Engineer to serve as the primary technical resource for process engineering at their site in Tampa, FL. This role blends hands-on process optimization, ensuring efficient, safe, and high-quality operations . The position offers strong growth potential to support additional facilities in FL as expertise and leadership expand. Key Responsibilities * Process & Quality Leadership – Serve as the primary process engineer, driving daily operations and ensuring compliance with standards and regulations. * Optimization & Improvement – Monitor, troubleshoot, and optimize manufacturing processes. * Equipment Support – Provide technical expertise for the operation, maintenance, and commissioning of new equipment; partner with maintenance teams on PM programs. * Continuous Improvement & Development – Identify efficiency opportunities, support new product development, and participate in cross-functional improvement teams. * Customer & Business Support – Provide technical expertise for customer requirements, support audits, and partner with sales and technical teams on new business initiatives. Qualifications * Bachelor's in Chemical, Mechanical, Materials Engineering, or related technical field. * 2+ years in plastics manufacturing or related manufacturing process (i.e., injection molding, thermoset, rubber compound, thermoplastics, etc.) * Strong analytical, problem-solving, and communication skills. EOE

Job Description Job Overview A Senior Software Engineer leads the software development team as they create software solutions for AEVEX. This person serves as an in-house expert, both for managers from other departments who need software solutions and the less experienced staff within the Software department. This person leads software development projects, starting with collecting and studying the information and needs of the user. This person looks at different possible solutions and how feasible those options are. This person is also responsible for keeping the project on track, documenting everything and keeping proprietary information confidential. Essential Functions • Responsible for all aspects of the software development process including requirements, design, implementation, functional test, trouble shooting., • Work with upper management to define software requirements and take the lead on operational and technical projects., • Specification, design, development, maintenance, integration, documentation, debug and testing of software for Windows and embedded software applications in C and C++., • Embedded applications in custom headless devices with focus on real-time performance aspects including multi-threading, time synchronization., • Configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as internal software libraries and products, GPS receivers, LiDAR sensors, Inertial sensors, network routers, radio modems, meteorological sensors, serial port hubs, etc., • Working on development, integration and processing Geospatial Information Systems, • Working on both military and commercial applications, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Strong understanding of GPS, Inertial Navigation, Sensor fusion from a software architecture realtime processing perspective, • Ability to work independently with little supervision, • Possess excellent organization and problem-solving skills with extensive hands-on experience in software development, • Knowledge of communication protocols (e.g. SPI, I2C, UART, CAN), • 10+ years of software development experience, • Prior experience developing Autopilot systems, ground control stations, or flight simulation software is highly desirable The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws. About AEVEX Aerospace AEVEX Aerospace, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Position Summary Description Accountable for the engineering, designing, testing, commissioning, and maintaining, the Seminole’s Energy Management System (EMS) and associated databases and systems in a manner that safely and reliably monitor, control, and optimize the performance of the generation resources and transmission infrastructure. Develops, implements, and maintains operational and maintenance plans, processes, and procedures that are effective and efficient at meeting regulatory compliance requirements, corporate standards, and guidelines, in addition to industry standards and best practices. Manages EMS and SCADA projects. Work activities involve a high degree of complexity with respect to technical engineering concepts, tools, databases and systems and the ability to work independently as well as team environments. May provide direction and technical support to technicians, operators and other non-engineering staff as needed. Essential Functions • Implements EMS databases (SCADA, FEP, ICCP) and displays for all existing and new field installations, in consultation with operations technicians, other engineers, and/or system operations staff, • Assures documented point-to-point validation of field (RTU) inputs through the SCADA database and to applicable operational displays prior to release for operations, in coordination with operators, field technicians, and/or other engineers, • Designs and implements code changes in the EMS OpenCal subsystem as necessary, • Programs and reviews settings in RTUs and other non-control field equipment, • Designs, reviews, and troubleshoots data communications within field environments, • Manages assigned capital and expense EMS, SCADA and/or related projects from project approval through project closeout, • Implements changes to the SCADA, FEP, ICCP and other EMS databases in accordance with system and field changes as outlined in ‘request for change’ tickets, • Designs, implements, and validates EMS displays in accordance with established guidelines, practices, and request for change tickets, • Assures all telemetered (SCADA) values are properly indicated on EMS operational displays in accordance with operations guidelines and defined standards, • Creates and installs the monthly load estimation curve files on EMS and supports validation of real-time load data, • Assesses, installs, and tests assigned security patches, anti-virus updates, operating systems updates, and software enhancements, • Serves as Subject Matter Expert (SME) with compliance of assigned NERC Reliability Standards which includes participating in audits in addition to developing RSAWS, self-reports and mitigation plans and other ad hoc reports, as required, • Produces, designs, and modifies documentation in accordance with department Operating Instructions and Operating Practices to ensure system integrity and compliance with NERC standards and other applicable industry standards and best practices, • Participates in the investigation of operational incidents and/or equipment failures that may lead to reportable events, performs sequence of event review, analysis of recorders and logs to perform root cause analysis to develop recommendations and corrective actions to mitigate future occurrences., • Serves as on-call engineering contact for EMS and/or SCADA matters periodically, • Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form as applicable and directed. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM., • Performs other duties as applicable to the position or as assigned. Qualifications and Education Requirements Bachelor’s degree in electrical engineering or computer engineering from an ABET accredited institution. Minimum of six (6) years of experience in engineering, testing, maintenance and/or operations of Energy Management Systems, Supervisory Control and Data Acquisition Systems, Remote Terminal Units, System Protection Schemes and/or associated communication systems and equipment in a plant or substation environment. A master’s degree in engineering, or registration as a Professional Engineer (PE) will equate to one (1) year of experience. Experience in managing EMS, SCADA and/or other related projects. Professional Engineer (PE) License is a plus. Ability to effectively express engineering and other technical information to non-engineering staff. Experience solving real-time technical issues and addressing problems independently while serving on-call functions. Core Competencies: Collaborative, Adaptable, Outcome Driven, Conscientious, Critical-Thinking, Professional Technical Competencies/Skills: • Electrical Principles, • Computer and communication Troubleshooting, • EMS database functions, • AGC and ICCP functions, • SCADA/RTUs/Communication Systems, • Test Equipment and Procedures, • NERC CIP compliance, • Project Management, • Effective verbal/nonverbal, listening and written communications, • Innovative and Always Learning, • Detailed Oriented, • Self-Starter and Take Initiative, • Analytical and Problem Solving, • Multi-Tasking – multiple assignments and demands, • Organizational, time management, and leadership skills Physical Requirements Must be able to follow established protective measures including wearing required personal protective equipment (PPE). Must possess a valid driver’s license and acceptable Motor Vehicle Report. Working Conditions Work is indoors with occasional travel away from the office environment. Must be available to work outside normal business hours and occasionally stay out of town. While working in certain areas of generation facilities, there may be extreme temperatures and conditions. “Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.”

Job DescriptionDescription: The Director of Marine Operations oversees all aspects of a company’s maritime activities, ensuring safe, efficient, and compliant operations of vessels, crew, and facilities. This leader develops and implements operational policies, ensures regulatory compliance, manages budgets, and drives continuous improvement to deliver exceptional service and operational excellence. Responsibilities • Oversee day-to-day marine operations including port captain, engineering, dock crew and maintenance., • Ensure smooth coordination between marine, engineering, hospitality, and administrative teams., • Develop and execute operational strategies to meet performance, safety, and financial goals., • Manage and facilitate special projects., • Ensure all vessels, crew, and operations comply with U.S. Coast Guard and local maritime regulations., • Establish and maintain safety management systems, emergency procedures, and crew training programs., • Recruit, train, and supervise captains, deckhands, and support staff., • Promote a positive work culture focused on safety, service, and professional growth., • Partner with Human Resources to ensure a positive employee life cycle., • Budget & Resource Management, • Develop and manage budgets for marine operations, maintenance, and capital projects., • Oversee procurement of fuel, parts, and marine services; negotiate vendor contracts., • Maintenance & Asset Management, • Ensure preventive maintenance, repairs, and refits are planned and executed efficiently., • Monitor vessel performance, certifications, and documentation to minimize downtime., • Partner with sales, marketing, and events teams to ensure marine operations support business goals., • Serve as primary liaison with regulatory agencies, port authorities, and maritime vendors., • Lead process improvements to increase efficiency and reduce costs., • Minimum of 7 years of experience working within the marine and passenger vessel industry., • Ability to clearly and concisely present technical subjects. Strong business & financial acumen, negotiating and cost control skills., • Proven experience with contract & vendor negotiation., • Project management and budgeting experience., • Knowledge of U.S. Coast Guard regulations, maritime safety standards, and vessel operations., • Strong leadership, communication, and problem-solving skills., • Proven efficiency with Microsoft Office (PowerPoint, Excel, Word and Outlook), • Flexibility to work extended hours or weekends as needed., • Safety first mindset. Experience/ Education, • 100 Ton Master's License required or engineer license (Near Coastal Preferred, Inland acceptable), • Preferred 3 years as Captain or marine management with an excellent safety record, • Marine Operations Manager: 1 year (Preferred)Benefits, • Salary: $100,000 + based on experience; plus 20% incentive potential based on annual goals., • Relocation assistance available. The position is full-time and includes a full suite of benefits, which are effective the first of the month following 30 days of employment., • 401(k) & Matching, • Health Insurance plus vision, dental, life, accident, disability, hospital, critical illness, identity, pet, legal and more., • Paid Time Off (PTO), • Professional development assistance, • Subsidized Parking