Trabajos maintenance engineer en Albany, New YorkCrear alertas

Job Description Job Title: Field Service Engineer II – Onsite Reports to: Site Coordinator Classification: Non-Exempt Summary: This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications, and qualifications. In addition, the position is accountable for being able to operate as an independent “product expert” on select EVG product lines. Capable of assisting in the implementation of detailed, complex customer installation plans for reliability, process qualification, and sign-off. Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Provides onsite technical support for development and implementation of equipment and process applications. Trains other Field Service Engineers on specific product lines. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Provides professional and courteous service to customers with a primary goal of complete customer satisfaction., • Assists customers and other personnel in identifying and repairing equipment related process problems., • Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment., • Performs start-up, warranty, paid service, and service contract activities. Performs hardware set-up on specified systems within established time frames., • Keeps Management informed of down situations. Documents, logs, and reports activities as required., • Troubleshoots and corrects process variations on systems. Diagnoses sources of hardware or process problems on equipment, facilities, or wafers., • Participates in local customer meetings and communicates orally with customers in face-to-face, one-on-one settings, group settings and communicates professionally by email and telephone, as needed., • Prepares and submits all required paperwork on a timely, routine basis., • Maintains all assigned equipment logs and records promptly and thoroughly., • Records activities clearly in written pass down and communicates clearly face to face when handing work off to oncoming shift., • Complies with all OSHA and Customer Safety requirements. Stays current all prescribed and recurrent training courses for EVG and Customer to maintain uninterrupted access to customer site., • Works overtime and/or travel on short notice, including unscheduled callouts from home and other shifts, as needed., • Must be able to travel domestically and internationally overnight, as needed, up to 20% of the time. Must possess a valid passport., • This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver’s license and have acceptable driving privileges., • Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts), • Assists and completes onsite equipment installations or complex retrofits on equipment and obtains Final Acceptance by the customer., • Ability to utilize training skills to troubleshoot tools to resolve issues and minimize downtime. Keeps equipment running properly and efficiently to enhance customer satisfaction., • Other duties, as assigned. Additional Duties and Responsibilities: • Initiates purchase orders for parts and service., • Maintains and performs repairs on company demo cleanroom equipment., • Keeps informed and trained on company’s most current systems, methods, and procedures, including site safety., • Demonstrates excellent customer service skills (foreign and domestic)., • Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience: • This position requires an associate degree or bachelor’s degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment., • Advanced electromechanical troubleshooting skills., • Knowledge of quality improvement process methods and terminology., • Ability to identify and solve advanced process-related system problems., • Ability to communicate and demonstrate professional conduct with all levels of customers, management, and coworkers., • Must have advanced PC skills (Windows, MSOffice suite)., • Kepner-Tregoe Problem Solving and Decision Making training, preferred. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. PI22c3493b3e63-25405-38637964

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY About Rezolut Rezolut is a national emerging platform of diagnostic medical imaging services, focused on delivering high-quality patient care with innovative technology. We provide fixed-site and mobile outpatient imaging services, positioning ourselves as leaders in radiology across all modalities.Position Overview Rezolut is seeking a Siemens-Certified Field Service Engineer to service, maintain, and repair Siemens Mammography, MR, and Ultrasound systems across our network in the Northeast. While Siemens certification is required, experience servicing other diagnostic imaging modalities—such as GE and Hologic—is highly valued. This position requires travel and offers training, career growth, competitive pay, PTO, and benefits.Primary Responsibilities • Troubleshoot, install, maintain, and repair Siemens Mammography, MRI, and Ultrasound systems., • Service additional diagnostic imaging equipment from GE, Hologic, or other OEMs, as needed., • Complete preventive maintenance, modifications, setup, calibration, QC, and QA per OEM specifications., • Maintain service records, daily customer communications, and follow-up to ensure resolution., • Maintain tools, test equipment, and ensure proper calibration., • Work collaboratively with internal teams while also operating independently in the field., • Lift, carry, and transport tools and equipment as required., • Adhere to HIPAA, OSHA, FDA, and other regulatory requirements., • Establish and maintain professional relationships with customers and peers.Required Education & Experience, • Siemens certification for diagnostic imaging systems is required., • Associate's degree or equivalent technical training; OEM Radiology, Electrical, or Technology experience preferred., • Minimum 2+ years of experience servicing diagnostic imaging equipment, including Siemens systems., • Experience with mechanical, electromechanical, and electronic diagnostic imaging systems., • Proficiency with MS Word, PowerPoint, Excel, and Outlook., • Excellent analytical, communication, and problem-solving skills., • Ability to work independently in a fast-paced environment with changing priorities., • Valid driver’s license and clean driving record., • Must be able to travel regularly.Preferred Experience, • Hands-on experience with other OEM imaging systems: GE, Hologic, etc., • Customer-focused service experience in medical imaging environments.Benefits, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJob Type: Full-time

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking Senior Aveva PI Engineer who wants to be part of a growing business to support the design, deployment, testing, and maintenance of PI Systems. You Will: • Serve as team lead on PI System applications through installation, design, implementation and support., • Design, build, test, validate, troubleshoot and debug new and existing systems., • Commissioning of new PI systems, • Bachelor's Degree in Engineering, • 5+ years of experience designing and maintaining PI Systems, • Experience integrating PI with PLC and DCS systems, • Experience in using Asset Framework to create asset models, • Experience in using PI Vision or other tools to create displays and reports for front end users to leverage the PI Data, • Experience with PI to PI and RDBMS interfaces is a plus, • Understanding of IT systems, Automation, and network infrastructures, • Understanding of Biopharmaceutical processes is a plus, • GMP and validation experience is a plus, • Knowledge of S88 Batch standards and experience implementing batch systems is a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job Description HiFyve is hiring a Technical Field Service Engineer based in the U.S. Applicants can live anywhere, must possess a valid passport and TWIC card for domestic and international travel. Salary: $110 to $130K Annually + OT (non-exempt role) Schedule: Work Schedule Pending Travel Demands Location: Based Remotely, Travel across U.S. and Canada Job Duties and Responsibilities: • Supervise and execute installation, commissioning, maintenance, and troubleshooting of rotational and turbo machinery., • Lead field service teams, up to 20 people, and ensure projects meet safety, environmental, and quality standards., • Analyze and resolve technical issues, collecting and reporting data to improve performance and reliability., • Advise customers on operational best practices, maintenance programs, and spare parts planning., • Perform vibration diagnostics, technical assessments, and customer training., • Collaborate across teams, including engineering, field service, and aftermarket sales. Education Requirements: • Bachelor's Degree in Mechanical Engineering Knowledge, Skills, and Abilities: • MUST be flexible for travel between U.S. and Canada for up to 90 days at a time, • Valid Passport or ability to obtain a Passport, • TWIC Card Required, • Minimum 10+ years hands-on experience with Steam Turbines and Compressors, • Customer Experience Mindset to drive external solutions forward, • Advanced supervisory skills and ability to lead large, complex field projects., • Proficiency in Microsoft Office Suite, including Word, Excel, PowerPoint, and Project., • Ability to train others and lead technical discussions., • Experience working with international teams and contractors.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Hybrid with local driving travel You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition, • Configuration & use of one or more of Wonderware DAS/OI Server, FactoryTalk Gateway, RSLinx, RSNetWorx, KepServerEx, • Configuration & development of one or both of Wonderware InBatch & Rockwell FTBatch, • Configuration & development using one or more of Wonderware Historian, FTHistorian, OSI PI, • Use of SQL for database creation, query & management.Ability to develop stored procedures, functions & views and use of SQL commands for integration of control systems to back-end databases. Familiarity with SSRS for reporting, • Configure & operate Allen Bradley PowerFlex Drives via manual HIM or through PLC programming, • Configuration, use & troubleshooting of Allen Bradley Stratix switches, • Bio Reactors, • Skid System Controls, • Clean/Steam in Place, • Freeze Dryers, • Autoclave Control Systems, • Centrifuge Systems, • Building Management & HVAC Control Systems, • Thermal Oxidizer Systems, • Purified Water, • Finished Product Transfer Systems, • Granulator Control Systems, • Boilers and Boiler Control Systems, • Bulk Material Handling and Processing, • Laboratory Systems, • Pasteurization and Homogenization, • Wastewater Treatment, • Weighing and Metering Systems, • Wet or Dry Blending System, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. #LI-BB1

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With a focus on four key platforms, our vision is to provide top-notch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Rezolut is seeking Medical Imaging Service Engineer to provide service and repair to Mammography, Ultrasound, MRI, CT, and X-ray systems nationwide. We are an industry leader with training and career growth opportunities. We offer an excellent pay rate, paid time off, and benefits package options. The Field Service Engineer will be responsible for meeting the daily service maintenance and repair needs of the company’s equipment as well as our customers’ equipment. This position requires regular travel. Below are the equipment manufacturers and modalities that would primarily be serviced: • Siemens – Mammography, MR, and US, • GE Mammography and US, • Philips CT, MR, and US, • Basic troubleshooting, installation, maintenance and repair of radiological equipment., • Completing Preventative Maintenance and modifications., • Setup, calibration, QC and QA of customer’s equipment according to OEM specifications., • Keeping up to date on administrative responsibilities such as maintaining service records in a timely manner., • Maintaining daily communications with customers to ensure resolution and proper follow-up., • Maintaining tools and test equipment and ensuring they are properly calibrated., • Working as a member of Assured Imaging’s team as well as being able to work independently, to provide efficient service., • The ability to lift, carry, and move tools and necessary equipment., • Adhering to current regulatory requirements to include, but not limited to, HIPPA, OSHA and FDA., • Associate's degree or Radiology OEM training, Electrical, Technology, equivalent military experience or Associates Degree with 2 or more years’ experience in servicing Diagnostic Imaging equipment., • Must have experience servicing diagnostic imaging equipment., • Experience interfacing with both internal team members and external customers as part of a solution-based service process., • Valid driver’s license and good driving record is required., • Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment., • Proficient level of computer skills including MS Word, PowerPoint, Excel and Outlook., • Excellent analytical, interpersonal and communication skills with the ability to communicate complex technical issues in an easy to understand manner., • Ability to work in a fast-paced, self-directed, entrepreneurial environment., • Resourceful, with the ability to work independently., • Strong time management skills., • Ability to adapt to changing circumstances., • Decision-making, problem-resolution and creative thinking skills, • Attention to detail., • Ability to multi-task activities with shifting priorities. Able to work productively in a pressurized environment. Pay: $80,000.00 - $100,000.00 per year Benefits: • Immediately accrue PTO as you work! (Full Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances for full-time employees, • 401(k) Retirement plan, • Employee Assistance Program

Job DescriptionDescription: Advance Your Career in Environmental Science – Make a Real-World Impact Are you an Environmental Specialist, Environmental Scientist, or Environmental Engineer looking to take your career to the next level with hands-on, impactful work? Fisher Associates is seeking an Environmental Specialist II to join our mission-driven team dedicated to environmental consulting, site assessments, remediation, and regulatory compliance. In this role, you’ll lead and support Phase I and II Environmental Site Assessments (ESAs), oversee cleanup and remediation projects, and ensure compliance with local, state, and federal environmental regulations. Your expertise in environmental investigations, remediation strategies, and sustainability practices will directly protect natural resources and build stronger, more sustainable communities. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Plan and execute Phase I and II Environmental Site Assessments (ESAs), due diligence investigations, and environmental compliance audits in accordance with ASTM standards., • Design and implement site remediation programs including soil, groundwater, and vapor mitigation., • Prepare site characterization reports, corrective action plans, soil management plans and site-specific health and safety plans., • Perform field inspections, including sampling of soil, water, vapor, and air; well monitoring; and operation and maintenance of remediation systems., • Oversee field activities such as drilling, sampling, and remediation system installation with minimal supervision., • Coordinate effectively with laboratories for sample submission and chain-of-custody documentation., • Interpret environmental data and prepare technical reports, analytical data tables, plume mapping, and collaborate on GIS mapping for project documentation and regulatory submittal., • Monitor, collect data for, and optimize ongoing remediation systems., • Coordinate with regulatory agencies, subcontractors, and clients., • Serve as Site Safety Officer, ensuring projects comply with applicable environmental laws and health and safety standards, including any required training requirements., • Collaborate across multidisciplinary teams to deliver integrated environmental solutions., • Ensure QA/QC standards are met throughout the project lifecycle., • Provide technical support for proposals, cost estimates, and remediation planning., • Support abatement-phase construction administration., • Conduct compliant asbestos building inspections, quantifications, draft reporting, and project air monitoring., • Conduct compliant materials inspections for lead paint, PCB-caulk, mold, and universal waste. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects as an Environmental Specialist II and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as an Environmental Specialist II • B.S. in Environmental Science, Geology, Engineering, or related field., • Minimum of 5-10 years of relevant experience in site remediation and environmental consulting., • Knowledge of EPA and state remediation regulations (CERCLA, RCRA, NYSDEC, PADEP, etc.)., • Experience with remediation technologies (e.g. ISCO, SVE, bioremediation, excavation)., • Strong analytical and problem-solving skills., • Excellent communication and report-writing abilities., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Building Inspector strongly preferred., • NYSDOL certifications including Asbestos Air Monitor, Project Designer, or Mold Assessor a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, AutoCAD, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots.

Job DescriptionThis Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $160,000 per year A bit about us: A leader among commercial contractors nationwide. From local municipalities to large Federal clients, we have built some of the most visible architectural landmarks in the country, creating a strong foundation with solid relationships. The firm provides services in preconstruction, cost estimating, value engineering, construction management, design-build, general contracting, and building maintenance for an array of market segments. Why join us? • Competitive Compensation, • Full Benefits, • Annual Bonus, • Growth Opportunities, • Collaborative Culture Job Details The Quality Control Manager (QCM) is responsible for planning, coordination, implementation, and oversight of the project quality control plan to ensure that projects meet or exceed all stated requirements with respect to materials and workmanship. The QCM will report to the Project Executive and will work with the project team to help achieve project objectives. The QCM will also work with subcontractors, clients, architects, engineers, consultants, and outside agencies. This position is located at Albany, NY area. Responsibilities Include, But Are Not Limited To Develop Quality Control Plan for submission Review and approve submittals and work plans Interpret Contract Drawings, Specifications, Shop Drawings and Material Submittals for contract compliance Review RFIs and change orders; ensure installed work conforms with supplemental instructions or direction provided by authorized Owners Reps and/or the A/E. Schedule and conduct Preparatory Meetings; complete and distribute meeting minutes Implement the Three Phase Quality Control procedures Document inspections and issue reports Develop and maintain quality control logs Inspect material deliveries for compliance with approved submittals and industry standards Inspect for damaged or defective materials and workmanship Reject defective work or materials and require removal or correction to be made compliant Issue non-compliance notice for deficient materials or workmanship Update and manage non-compliance log Prepare and submit daily reports including all required quality control reports, inspection reports, and testing documentation Schedule and coordinate all 3rd party testing and inspection requirements Responsible for documenting and maintaining records relating to testing data Responsible for selecting products for tests at specified stages in production process and test products for variety of qualities, such as performance, strength, and chemical characteristics as required Responsible for testing and monitoring of products to ensure factors such as adhesion, hardness and strength are compliant with contract requirements Draft punch lists, review punch list work, sign off on corrected items, and update punch lists Minimum OSHA 10-hour certification Conduct business in a professional and ethical manner and integrate well into the project team. Knowledge And Experience Requirements Must be a graduate engineer, graduate architect, or a graduate of construction management, with a minimum of 2 years construction experience on construction similar to this project, one year of which as a Quality Control Representative -OR- Must have a minimum of 10 years construction experience on construction similar to this project, one year of which as a Quality Control Representative. Additionally, the Quality Control Manager is required to have completed the US Army Corps of Engineers Construction Quality Management (CQM) for Contractors course. If the Quality Control Manager does not have a current certification, obtain the CQM for Contractors course certification within 30 days of award. Professional Engineer licensed in the state of New York is preferred Knowledge of Procore software is a plus Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.Company DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Senior Support Engineer, Core Systems About TireHub: At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. Role Summary: The Senior Support Engineer, Core Systems is responsible for the operational maintenance, stability, and monitoring of TireHub’s critical platforms, including ERP, Delivery, Yard Management and related systems. This position reports to the Application Support Manager or Product Owner, Core Systems. When you say YES to something bigger: • Choose your day one benefits which include a no cost health insurance option, • TireHub funded Health Savings Account, • Additional benefit options including TireHub paid short/long term disability and life insurance benefits, • Paid vacation and holidays, • Parental leave programs, • Build your financial future with 401(k) including TireHub match, • Access to tire discounts, perks, and so much more! The individual must exhibit the following core TireHub commitments: · Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships. · Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique. · Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end. · Speedy - Speed is the currency in the tire industry. When we commit to a job, we get the job done – and we do it fast. Role Specifics: · Establishes and maintains proactive support monitoring for systems in scope. · Creates and maintains support knowledge, documentation, and runbooks for enterprise platforms in scope and their connectivity. · Identifies, diagnoses, and coordinates resolution of technical issues on assigned applications. · Ensures timely detection of application stability and/or functionality issues to up-time and reliability. · Develops support procedures and coordinates work across offshore and onshore support resources, providing tactical leadership as needed. · Detects and responds to system outages with appropriate triage, correction or escalation as per established runbooks. · Escalates issues to third-level resources including developers and vendor partners. · Serves as liaison between support groups (e.g. offshore support, and Customer Connectivity support) to ensure seamless transition. · Acts as onsite representative for support teams at the Headquarters, fostering collaboration with business departments requiring escalated support. Competencies: • Communication: This role requires strong communication skills and the ability to collaborate effectively across all organizational levels—from technical teams to executive leadership., • Agility and Adaptability: Thrive in a dynamic environment and embrace new methodologies., • Problem-Solving: Advanced analytical and critical thinking skills to identify, diagnose, and resolve technical issues efficiently., • Optimizes Work Processes: Identifies and implements the most effective and efficient processes to accomplish tasks, with a focus on continuous improvement and operational excellence., • Collaborates: Builds strong partnerships and works collaboratively with others to achieve shared objectives and to research, experiment, and benchmark advanced analytical, data science, and ML/AI methods and technologies., • Entrepreneurship/lntrapreneurship: Recognizing (market or business) opportunities for current/new products/services and finance, considering them in a businesslike manner (profit focus, cost savings, delivery timing) and taking action; taking risks and achieving a business advantage. Education/Experience: · Bachelor’s degree in Computer Science, MIS, or related discipline is preferred · 3-5+ years of applied technical support or systems administration experience preferred. Required Knowledge, Skills, and Abilities: · Applied knowledge of ERP lifecycle Accounts Payable/Accounts Receivable, inventory management, finance, GL) and warehouse/logistics systems (WMS, TMS, Yard Management Last Mile Delivery. · Expert knowledge of SQL Server interfacing technologies (Transact SQL). · Experience with Jira (or similar tracking tools) and GitHub (or other version control systems). · Proficiency with Postman or Fiddler, for API/web debugging. · Hands-on experience in an Agile/Scrum environment. · Strong skills in creating and maintaining support documentation and knowledge bases. · Ability to review Solution/Enterprise Architecture artifacts for supportability. · Strong diagnostic and triage techniques. Preferred Knowledge, Skills, and Abilities: • Working knowledge of Azure (Application Insights, App Services, Logic Apps, Azure SQL, Service Bus)., • Familiarity with Visual Studio IDE.NET Core, and AWS (Elastic Beanstalk, S3, EC2)., • This is a fast-paced and dynamic operating environment., • Majority of time is spent sitting, constantly viewing monitors in a comfortable position with frequent opportunity to move around. There may be occasions to move or lift light articles., • Must be able to work flexible hours during routinely critical times to support the department. This is a Remote - US based position

Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Trains other Field Service Engineers on specific product lines. Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment.

Stewart's Shops is looking for an experienced electrical technician for our production facility.The ideal candidate has the skills to install, maintain, upgrade, and troubleshoot electrical and mechanical equipment.Identify issues, develop plans, and execute solutions in a fast-paced production envi

Installing or servicing hydraulic/electric brake system, suspension, alignment, drive train, and power steering parts and components; testing and installing batteries; dismounting/mounting tire and wheel assemblies, rebalancing wheels, and replacing, rebuilding and/or recalibrating TPMS components;

About the OrganizationHeadquartered in Albany, New York, ANS Advanced Network Services is a turnkey EF&I (Engineering, Furnishing and Installation) provider of telecommunications solutions. The company also provides communications system and DC power system test and turn up, and 24-7 maintenance and

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Service Technician Modular Building Maintenance and Repair We are looking for a skilled full-time Service Technician to join our team and play a vital role in maintaining and repairing our fleet of modular buildings.

Electrical Engineer Job Duties: Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials. Pr

Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts). This position requires an associate degree or bachelors degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience in

Have a valid drivers license and clean record ASE certifications helpful In addition to transmission work we perform repairs and maintenance on Domestic and Asian vehicles everyday.

This position requires an associate degree or bachelors degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment. Field Service Engineer II Onsite. Training customer personnel on ad

Have a valid drivers license and clean record ASE certifications helpful In addition to transmission work we perform repairs and maintenance on Domestic and Asian vehicles everyday.

Ability to assemble and perform maintenance functions. Maintain assigned service vehicle in areas of cleanliness, daily maintenance and inspections.

Conduct regular maintenance on machinery, systems, and automotive vehicles. Design a plan of action for all maintenance tasks and upgrades. Maintain work logs, repairs, and maintenance records.

Project Manager in analyzing blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates for products, projects or services.Location(s): Saratoga Springs, NY.Permanent Position, Full Benefits: Yes.Assist in the procurement of subcontractors and suppliers

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Provides engineering information by answering questions and

Project Manager in analyzing blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates for products, projects or services.Location(s): Saratoga Springs, NY.Permanent Position, Full Benefits: Yes.Assist in the procurement of subcontractors and suppliers

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Do minor programming and maintenance for programmable logic controller-based equipment. Able to use tools and equipment to repair and provide maintenance while standing, crouching, stretching, extending extremities and under extreme work environments. This role is responsible for ensuring proper ele

Electrician Job Duties: Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring Inspect, test, and diagnose issues with electrical systems an

Eligibility begins after 6 months of continuous employment.Through voluntary deduction and is non-contributory by the employer.Hand tools: 1 year (Preferred).Outdoor work: 1 year (Preferred).Job Requirements Qualifications and Education Requirements.High school Diploma or Equivalent.Must possess a g

Boilermaker Job Duties: Design, install, and repair boilers used to heat water for generating electric power or providing heat in buildings and factories.Weld sections of boiler together using

Join our Amazing Team of trained, talented, and dedicated Technicians.Do meaningful work that you can be proud of by upgrading our Nation's Utility Infrastructure.Get paid training and start a successful career in the utility sector.Utility Partners of America (UPA) is a utility contractor offering

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers.

We're growing rapidly and looking for talented individuals to join our team.We are looking for Lead 'Residential HVAC Installers'.Must have experience, be clean cut and well spoken, have clean driving record, pass criminal background check.Must also own reliable transportation ( work Vehicle provide

This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet

We're growing rapidly and looking for talented individuals to join our team.We are looking for Lead 'Residential HVAC Installers'.Must have experience, be clean cut and well spoken, have clean driving record, pass criminal background check.Must also own reliable transportation ( work Vehicle provide

Are you looking to grow your career as a Level 1 or 2 Technician at a small, tight-knit MSP, whee you'll have the chance to help grow and shape the company from the ground up?.Kean Computing is a rapidly growing MSP based in Albany, NY.We specialize in helping small and mid-sized businesses, especia

Infection Prevention and Control Technical Specialst Job Duties: Consolidate, review and revise Americares existing technical materials related to disease outbreaks, infection prevention and control and health worker safety.Maintain current awareness of technica

Do you want to start your career with a company that values integrity, dedication, and hard work every single day? We want to offer you competitive pay, a generous benefits package, and opportunities for advancement.As leaders in the utility industry concentrating, on quality and safety, RECONN is l

Carrying standard equipment and parts with you at all times.Commuting between the locations at which you will work.Performing inspections, conducting assessments, and liaising with clients to ascertain the issues that warrant attention.Choosing the most apt course of action in light of project const

A heavy-duty vehicle maintenance certificate obtained from an accredited vehicle maintenance vocational/trade school may substitute for one-year vehicle maintenance experience. To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forkl

Provide ongoing maintenance, support and enhancements in existing systems and platforms. Collaborate cross-functionally with data scientists, business users, project managers and other engineers to achieve elegant solutions. Work alongside other engineers on the team to elevate technology and consis

Work with production/maintenance as necessary.

Operations Engineer Job Duties: Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervi

Work with production/maintenance as necessary.

Plumber Job Duties: Read blueprints and drawings to understand or plan the layout of plumbing, waste disposal and water supply systems Cut, assemble and install pipes and tubes with

To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forklifts, and other equipment that requires preventive maintenance, troubleshooting, modifications, and repairs. Must have one (1) year experience performing vehicle maintenance or

We are looking for enthusiastic plumbers with at least 6 months experience.Most of the jobs we do involve drain cleaning and water heater installs.If you have experience in these areas we would like to talk with you.You will drive our company van, use our equipment and help our customers.We have a f