Maintenance engineer jobs in Dallas, TexasCreate job alerts

Additional Information Job Number25152929 Job CategoryEngineering & Facilities LocationThe Westin Irving Convention Center at Las Colinas, 400 W Las Colinas Blvd, Irving, Texas, United States, 75039___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25148844 Job CategoryEngineering & Facilities LocationRenaissance Dallas Hotel, 2222 Stemmons Freeway, Dallas, Texas, United States, 75207___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Renaissance Hotels, we believe in helping our guests experience the DNA of the neighborhoods they are visiting. Our guests come to discover and uncover the unexpected, to dive into a new culture, or simply to make the most of a free evening. They see business travel as an adventure because they see all travel as an adventure. Where others may settle for the usual, our guests see a chance to bring home a great story. And so do we. We’re looking for fellow spontaneous explorers to join our team to bring the spirit of the neighborhood to our guests. If this sounds like you, we invite you to discover career opportunities with Renaissance Hotels. In joining Renaissance Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25143898 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver’s License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional Information Job Number25154424 Job CategoryEngineering & Facilities LocationW Dallas, 2440 Victory Park Lane, Dallas, Texas, United States, 75219___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job DescriptionDescription: As a Part-Time Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Title: Service Engineer Apprentice Reports to: Service Manager, (Assigned Technical Center) Location: DMG MORI USA, Technical Center Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 75% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Essential Job Functions: Service Apprentice will participate in training and development where the incumbent learns to repair, install and move all DMG MORI machines. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Complete all Classroom, factory training and online classes, and pass with 80% or higher scores., • Shadow Service Engineers on service calls, which require traveling with the Service Engineer to customer sites, • Learning through observation, while assisting Service Engineers on the call., • Progression in the apprentice program is competency based, participants are generally enrolled for 2 to 3 years before they receive certification and promotion to Service Engineer., • High School diploma or GED., • Demonstrated mechanical, pneumatic, hydraulic, electrical, or electronic, aptitude., • Experience in CNC manufacturing, maintenance, a related field, a journeyman certificate and/or extensive experience (5+Years) in machine/manufacturing maintenance or related field - such as military maintenance training and experience preferred., • Analytical/problem solving abilities to define, troubleshoot, and repair a machine without assistance, • High interpersonal and social skills required to successfully complete assignments in stressful situations, • Ability to communicate professionally and create positive relationships with customers, • Verbal skills to effectively communicate varying levels of internal technical staff and customers, • Time management skills to plan work and travel schedules to minimize downtime/nonproductive time, • Adaptability to abrupt changes in work schedule and travel arrangements, • Proven written skills and discipline to complete required Technical documents and Reports in a timely fashion., • Ability to travel domestic and/or internationally to visit customer locations and/or trade shows, • Ability to follow complex written and verbal instructions correctly., • Other duties as assigned. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Dallas, TX Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job DescriptionStep Into the Future of Aerospace with Us! A great opportunity awaits an Industrial Machinery Maintenance Engineer in Grand Prairie, TX, with a starting pay of $31.05 per hour. Passionate about keeping complex machinery running smoothly? Come join our dynamic team where every day brings a new challenge. Your technical skills will ensure the reliability of essential aerospace manufacturing systems, impacting countless lives with the quality products we deliver. Why This Role? • Routine and in-depth maintenance of industrial tools and equipment., • Overcome mechanical and electrical challenges by identifying the root causes and deploying solutions., • Implement strategies for preventive upkeep, safeguarding machinery longevity., • Decode technical designs and manuals for maintenance support., • Engage in teamwork to plan maintenance schedules and keep operations running smoothly., • Document maintenance activities and assess equipment health regularly., • Champion safety by complying with safety standards., • Aid in initiating and optimizing new system installations., • Proactively participate in the betterment of plant processes., • Operate forklifts and other transporting devices safely and effectively., • Incorporate craftsmanship in repairing and upgrading mechanical components., • Maintain order within the maintenance shop, adhering to PPE and lock-out/tag-out standards. Skills & Experience:, • At least 3 years in industrial maintenance within a manufacturing setting., • Expertise in mechanical, electrical, and pneumatic domains., • Adept at working with diagnostic and analyzing equipment., • Acumen in understanding blueprints and technical drawings., • Strong attention to detail with a solution-oriented mindset., • Effective communicator and team collaborator., • Flexibility to manage shift work and overtime where needed., • Reliable transport and active driver’s license essential for site visits., • Knowledge in PLC systems preferred., • An eager attitude towards prompt task execution. Physical Expectations:, • Handle equipment weighing 51 lbs or more., • Navigate varied and confined work environments.

Job Description The Maintenance Technician ensures the integrity of building systems by performing routine maintenance and minor repairs while supporting the efficient operation of equipment. This role provides hands-on support for general maintenance tasks under the supervision of the Chief Engineer or Assistant Chief Engineer. Essential Duties and Responsibilities: • Perform repairs in restroom facilities, including toilets and soap dispensers; clear drains using plungers and handheld augers., • Conduct general labor tasks, such as carrying, stacking, and sorting materials; debris removal., • Safely use employer-provided vehicles to travel for parts and supplies, adhering to all traffic laws., • Maintain and/or replace door hardware; handle minor furniture repairs and floor maintenance; and conduct basic painting tasks in equipment rooms; and perform general cleaning in mechanical spaces., • Perform maintenance tasks as assigned; conduct cleaning and inspections of engineering areas, mechanical spaces, and equipment., • Replace lamps, air filters, ceiling tiles, and fire extinguishers., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards; participate in safety audits., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Interact with tenants, engineers, and contractors while carrying out maintenance tasks., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards and participating in safety audits., • HS Diploma or GED required, • Technical or vocational training, and/or 1-2 years of on-the-job training in one or more of the following areas: HVAC, electrical, mechanical, process controls, or plumbing, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Possess engineering and trade licenses required according to local, state, or national requirements, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. #IND123 About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. $2K Sign-On bonus What this job involves – Operates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. What is your day to day? • Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components., • Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings., • Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations., • Respond effectively to all emergencies., • Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken., • Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment., • Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them., • Maintain compliance to State, County, or City Ordinances, Codes, or Laws., • Must be willing and able to support any after hours building related activity as required., • Attend periodic training seminars., • Other assigned operational tasks as may be typically expected of the Mobile Engineer role., • Candidate will be provided tools required to perform assigned work scope. Desired experience and technical skills Required • Universal EPA 608 Certification, • Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance., • Candidate must possess and maintain a valid state driver’s license, • Must be able to lift up to 80 lbs. and climb up to 30 ft. ladders., • Ability to perform on call duties and overtime as required. Preferred • Knowledge of overall MEP/HVAC system design and application., • Experience managing work orders, utilizing CMMS technology, • Experience working in a service-related role, specific to commercial facilities. Location: On-site –Dallas, TX If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our ___For more information about how JLL processes your personal data, please view our . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy ___. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our ___ page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Data Center Operating Engineer General Description: The Data Center Operations Engineer is responsible for delivery of best practice systems operations and problem resolution on all data center electrical and mechanical infrastructure including but not limited to UPS, MV electrical systems, generators, cooling systems, etc. Principal Duties and Responsibilities Task will include but not be limited to: · Responsible for maintaining, monitoring, and performing preventive maintenance and continuous operation of all building systems to maintain 100% Up-time including: fire/life safety, mechanical systems such as (HVAC, chillers, crac, crah, plumbing, controls), electrical including emergency backup systems such as (lighting, UPS, ATS, STS, PDU, generators, primary switchgear, power distribution, transformers), and hot water systems. Monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; boilers, and ventilating and water heaters; pumps, valves, piping, and filters; other mechanical and electrical equipment. Must record readings and make and adjust where necessary to ensure proper operation of equipment. · Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required. Comply with departmental policy for the safe storage, usage, and disposal of hazardous materials. Maintains a clean and safe workplace. · Learn and understand the data center site in-order to manage incidents and events that put the critical systems at risk. · Work order management, including CMMS, Vendor Management, and Customer Facing Tickets. · Understanding and complying with emergency escalation procedures. · Perform additional job duties as required. Minimum Requirements: · Preferred to have hands-on experience working in a data center/critical facility, including UPS Systems, emergency generators, and switchgear. · High School diploma or GED equivalent · 2+ years related work experience. · Working knowledge of computer applications including Word, Excel, Outlook, Teams. · Excellent verbal/written communication skills. · Valid drivers license and reliable transportation. · Work location is onsite. Preferred Requirements: · Corrigo experience. · MCIM / Salesforce experience. · Zendesk experience. · Service Now experience. · EPA 608. · NFPA 70E. · CPR / AED / First Aid. · OSHA 10. · OSHA 30. · Data Center Industry certifications such as Data Center Certified Associate, Certified Mission Critical Operator, etc. PHYSICAL WORK ABILITIES AND REQUIREMENTS: This position requires frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: · Walking large, campus-like settings. · Lifting a minimum of 50 lbs. · Climbing stairs and navigating rooftops to access equipment. · Using ladders up to 30 ft and working from heights. · Ability to Climb a ladder with a 300-lb weight limit. · Must be able to work different schedules. · Must be able to work Holidays. · Must be able to respond to site emergencies. · Ability to walk, climb, bend, kneel, lift, stoop, and work overhead. · Must be able to work outdoors in all seasons. Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits, include: · 401(k) plan with matching company contributions · Comprehensive Medical, Dental & Vision Care · FMLA at 100% of salary after 1 year of employment. · Paid Time Off and Company Holidays. · Compensated for Holidays Worked. · Pay differential for Night Shift Employment. If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Location: On-site –Richardson, TX If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our ___For more information about how JLL processes your personal data, please view our . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy ___. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our ___ page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Groundskeeper/Maintenance Assistant -___ (a premier class A 577-unit mid-rise community located in the Dallas suburb with direct access to the DART rail station) – Richardson, TX We are proud to have been voted by our employees as a 2024 and 2025 USA Best Workplace in ___, in the top 55 companies to work for by ___, and as a 2024 and 2025 Top 15 workplace in the ___! As a key member of our property maintenance team, you will be responsible for: • Ensuring your property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance including repair/adjustment of sprinklers, • Removing snow from walkways, • Assisting maintenance team members with apartment make-readies including painting and touch-up, • Delivering superior customer service and exemplifying professionalism at all times Qualifications:, • High school diploma or equivalent, • 1+ years of basic maintenance and/or general labor experience preferred, • Strong customer service orientation required What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Substantial discount on rent (certain restrictions apply) – 20% standard discount, 35% for on-call team members, 40% for on-call team members after 3 years of service, • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $15.46 - $17.23 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer, Landscape, Grounds, Groundskeeper #AFIA1234 Location : City: Richardson Location : State/Province: TX

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Groundskeeper/Maintenance Assistant -___ (a premier class A 577-unit mid-rise community located in the Dallas suburb with direct access to the DART rail station) – Richardson, TX We are proud to have been voted by our employees as a 2024 and 2025 USA Best Workplace in ___, in the top 55 companies to work for by ___, and as a 2024 and 2025 Top 15 workplace in the ___! As a key member of our property maintenance team, you will be responsible for: • Ensuring your property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance including repair/adjustment of sprinklers, • Removing snow from walkways, • Assisting maintenance team members with apartment make-readies including painting and touch-up, • Delivering superior customer service and exemplifying professionalism at all times Qualifications:, • High school diploma or equivalent, • 1+ years of basic maintenance and/or general labor experience preferred, • Strong customer service orientation required What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Substantial discount on rent (certain restrictions apply) – 20% standard discount, 35% for on-call team members, 40% for on-call team members after 3 years of service, • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $15.46 - $17.23 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer, Landscape, Grounds, Groundskeeper #AFIA1234 Location : City: Richardson Location : State/Province: TX

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Groundskeeper/Maintenance Assistant -___ (a premier class A 577-unit mid-rise community located in the Dallas suburb with direct access to the DART rail station) – Richardson, TX We are proud to have been voted by our employees as a 2024 and 2025 USA Best Workplace in ___, in the top 55 companies to work for by ___, and as a 2024 and 2025 Top 15 workplace in the ___! As a key member of our property maintenance team, you will be responsible for: • Ensuring your property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance including repair/adjustment of sprinklers, • Removing snow from walkways, • Assisting maintenance team members with apartment make-readies including painting and touch-up, • Delivering superior customer service and exemplifying professionalism at all times Qualifications:, • High school diploma or equivalent, • 1+ years of basic maintenance and/or general labor experience preferred, • Strong customer service orientation required What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Substantial discount on rent (certain restrictions apply) – 20% standard discount, 35% for on-call team members, 40% for on-call team members after 3 years of service, • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $15.46 - $17.23 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer, Landscape, Grounds, Groundskeeper #AFIA1234 Location : City: Richardson Location : State/Province: TX

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Groundskeeper/Maintenance Assistant -___ (a premier class A 577-unit mid-rise community located in the Dallas suburb with direct access to the DART rail station) – Richardson, TX We are proud to have been voted by our employees as a 2024 and 2025 USA Best Workplace in ___, in the top 55 companies to work for by ___, and as a 2024 and 2025 Top 15 workplace in the ___! As a key member of our property maintenance team, you will be responsible for: • Ensuring your property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance including repair/adjustment of sprinklers, • Removing snow from walkways, • Assisting maintenance team members with apartment make-readies including painting and touch-up, • Delivering superior customer service and exemplifying professionalism at all times Qualifications:, • High school diploma or equivalent, • 1+ years of basic maintenance and/or general labor experience preferred, • Strong customer service orientation required What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Substantial discount on rent (certain restrictions apply) – 20% standard discount, 35% for on-call team members, 40% for on-call team members after 3 years of service, • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $15.46 - $17.23 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer, Landscape, Grounds, Groundskeeper #AFIA1234 Location : City: Richardson Location : State/Province: TX

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Groundskeeper/Maintenance Assistant -___ (a premier class A 577-unit mid-rise community located in the Dallas suburb with direct access to the DART rail station) – Richardson, TX We are proud to have been voted by our employees as a 2024 and 2025 USA Best Workplace in ___, in the top 55 companies to work for by ___, and as a 2024 and 2025 Top 15 workplace in the ___! As a key member of our property maintenance team, you will be responsible for: • Ensuring your property maintains exceptional curb appeal by keeping the grounds and buildings clean and properly maintained, • Assisting in lawn and landscape maintenance including repair/adjustment of sprinklers, • Removing snow from walkways, • Assisting maintenance team members with apartment make-readies including painting and touch-up, • Delivering superior customer service and exemplifying professionalism at all times Qualifications:, • High school diploma or equivalent, • 1+ years of basic maintenance and/or general labor experience preferred, • Strong customer service orientation required What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Substantial discount on rent (certain restrictions apply) – 20% standard discount, 35% for on-call team members, 40% for on-call team members after 3 years of service, • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $15.46 - $17.23 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer, Landscape, Grounds, Groundskeeper #AFIA1234 Location : City: Richardson Location : State/Province: TX

Job Description Overview We are seeking a skilled and dedicated Field Service Engineer to join our team. This role is essential for providing exceptional service and support to our clients. In this role your primary responsibilities are to travel to our client locations and perform startup service on UPS systems, help perform commissioning, and conduct owner training on operation. You will also conduct repairs, perform preventive maintenance and calibration services on existing units. Our ideal applicant has several years of experience providing maintenance or installation services on Electrical Systems. Experience with programmable logic controllers (PLC) and high-voltage circuitry a plus. Duties • Travel to customer facilities with all required tools and perform installation, maintenance, and repair of equipment, • Perform Startup and Commissioning services, • Read and interpret schematics to ensure unit is set up properly, diagnose electrical and mechanical problems, • Provide technical support by understanding customer needs and recommending appropriate solutions, • Collaborate with customers to ensure satisfaction and address any concerns effectively, • Maintain a clean and organized work environment while adhering to safety protocols, • High School diploma or GED certificate, • Familiarity with PLC and high-voltage circuitry, • Electrical experience, • Excellent customer service skills with the ability to communicate effectively in English As a Field Service Engineer at our small, growing company, you’ll enjoy a supportive work environment with competitive benefits to help you thrive personally and professionally. We provide health insurance, PTO, retirement. Company DescriptionWe are a Manufacturers Representative and Distributor of equipment for Data Centers and other companies with critical infrastructure and processes.We are a Manufacturers Representative and Distributor of equipment for Data Centers and other companies with critical infrastructure and processes.

Job Description Job Openings: Field Service Engineer/Technician $30-$40 hourly - all shifts Full time permanent with benefits, travel required We’re hiring Maintenance Mechanics to support smooth plant operations. You’ll troubleshoot, repair, and maintain industrial equipment to keep our production running efficiently. Job Openings: Field Service Engineer/Technician Dallas $30-$40hourly - all shifts What You’ll Do: • Perform routine maintenance & repairs· Troubleshoot mechanical, electrical, & hydraulic issues, • Follow safety procedures (including LOTO & PPE), • Read blueprints & schematics, • Operate forklifts, scissor lifts, SkyTrac, • 3+ years’ industrial maintenance experience, • Solid mechanical, electrical, pneumatic & hydraulic skills, • Able to read technical documents, • Reliable transportation & valid driver’s license, • PLC knowledge a plus Company DescriptionTop nonprofit in Knoxville making a difference in our community!Top nonprofit in Knoxville making a difference in our community!

Job DescriptionDescription: Location: Dallas, TX, 75248 Skills: Perform Routine Maintenance Do you take pleasure in ensuring a property is run correctly? Bent Tree Country Club is seeking a track-proven individual who takes pride in their day-to-day work as a Building Engineer. The Building Engineer will be responsible for maintaining and repairing the mechanical, electrical, and plumbing systems in the building. This includes but is not limited to kitchen equipment, HVAC, boilers, and BMS operation. The Building Engineer will also be responsible for ensuring that all systems are operating efficiently and safely and will be required to troubleshoot and diagnose any issues that arise. The ideal candidate will have experience in all of the above areas, as well as strong communication and problem-solving skills. Responsibilities: • Maintain building systems, including fire alarms, HVAC, plumbing, & electrical to ensure the operation of equipment is within design capabilities and achieves environmental conditions prescribed by the client., • Conduct preventative maintenance throughout the main clubhouse and the Tennis building, • Maintain detailed records of maintenance tasks, repairs, and equipment inventory., • Perform routine maintenance checks and repairs on equipment and machinery, including commercial kitchen appliances., • Collaborate with the Chief Building Engineer to ensure equipment readiness for daily operations., • Adhere to safety protocols and maintain a clean and organized work environment., • Ensure all equipment is in safe and working condition, • Meet the physical requirements of this role, including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs or more., • Knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc., • Communicate with management regarding equipment needs and repairs Requirements: Qualifications: • High school diploma or equivalent, • Commercial Kitchen equipment repair, • Technical training in HVAC/R, electrical, and plumbing., • Boiler experience, • BMS Operator, • Attention to detail and a commitment to delivering high-quality work., • Excellent communication skills and a team-oriented mindset., • Professionalism and strong customer service skills, • Pool Maintenance, • Ability to work independently and prioritize tasks effectively., • Proven experience as an engineer, preferably in the hospitality industry, • Knowledge of mechanical systems and components, • Ability to diagnose and repair mechanical issues If you are a skilled Engineer with a passion for preventive maintenance and repairing equipment, we encourage you to apply for this exciting opportunity at Bent Tree Country Club. Join our team and contribute to the exceptional experience we provide to our members and guests.

Job DescriptionSalary: $65 - $75 per hour Cisco Voice Engineer (CUCM) Healthcare Infrastructure Support • Location: Hybrid (Hospital Environment), • Type: 6-Month Contract with Possibility of Extension, • Compensation: $70/hr - $80/hr W2 About the Role: Morris Technology Solutions (MTS) is seeking a highly skilled Cisco Voice Engineer with CUCM design and implementation expertise to support a healthcare infrastructure project. This is a high-impact, hybrid role focused on the design, maintenance, and architecture of Cisco-based voice systems, including Call Manager (CUCM) and associated telephony infrastructure. Why MTS? Founded and headquartered in San Antonio with local ownership, you will have the opportunity to learn from the brightest in the industry in an in-person office setting. • Join a fast-growing consultancy in a position with growth and promotional opportunities., • Develop life-long relationships with leaders and mentors across a spectrum of functions., • MTS is a values-based and people-centric firm as evidenced by our reviews on Google and Glassdoor! Responsibilities: • Lead the design, architecture, implementation, and ongoing support of Cisco Voice (CUCM) systems., • Collaborate with network teams to ensure QoS and system interoperability within hospital systems., • Conduct site surveys, assessments, and system upgrades where necessary., • Document configurations and procedures to support long-term maintenance., • Troubleshoot call routing, device registration, and dial plan issues., • Support cutovers, escalations, and post-deployment testing., • Coordinate closely with hospital IT teams and vendors to ensure compliance and uptime. Requirements: • 5+ years of hands-on experience supporting Cisco voice environments., • Proven experience in CUCM (Cisco Unified Communications Manager) design and deployment (Required)., • Strong understanding of dial plans, SIP trunking, gateways, QoS, and H.323/SIP protocols., • Previous experience working in a hospital or healthcare IT environment is strongly preferred., • Relevant Cisco certification required (e.g. CCNP Collaboration or equivalent)., • Excellent communication and troubleshooting skills., • Ability to travel on-site (roughly 30%) as needed. Additional Notes • Candidates must be comfortable working in a healthcare setting., • Compliance with general hospital onboarding policies (e.g., immunizations, screenings) is required.

Job Description Are you looking to join one of the fastest growing Mexican food companies in the world? Here at MegaMex Foods, our purpose is to Reimagine Mexican Flavors. Opportunities are endless with our locations domestic and international including the Orange Office, Distribution Center in Saginaw, Manufacturing Plant in Dallas, and several plants in Mexico, Colombia, and Peru. At the core of who we are is Together – Juntos. Together, we bring the spirit of Mexico to every table. We value different backgrounds and work experiences as they provide new ideas and ways to Reimagine Mexican Flavors. We aim to drive a culture where everyone feels valued, respected, safe, and free to be themselves. We are Juntos! Join a company where maintenance goes beyond repair—it's a commitment to operational excellence and safety. We’re hiring a Reliability & Projects Engineer to help lead our plant, drive equipment reliability, and grow into a future leadership role. What you will be doing: • Develop reliability strategies for critical food manufacturing equipment (mixers, ovens, fryers, conveyors, packaging lines, etc.)., • Implement predictive maintenance programs using CMMS data., • Develop and optimize PMs and predictive maintenance, including vibration monitoring and condition-based maintenance., • Conduct root cause failure analysis (RCFA) and implement permanent fixes., • Create and implement a critical parts strategy to ensure availability while reducing excess inventory costs., • Support new equipment commissioning, integrating reliability into startup plans and training., • Partner with operations and maintenance to continuously improve OEE and reduce variability., • Education: Bachelor’s Degree or equivalent experience, • Proven leadership in driving safety initiatives and maintaining compliance standards., • Labor efficiency and cost per pound, • Pounds per man-hour, • Lost time frequency/severity rate, • QA/USDA holds, • Documented continuous improvement activities, • Top-tier Medical, Dental, Vision, and Voluntary benefit plans, • Company-Matched 401K Retirement plan, • Bonus & Referral programs, • Time-Off benefits for Holidays, Vacation & Sick, • Career Development, Training, and Opportunities, • Relocation assistance is not available for this position., • MegaMex is an equal opportunity employer (EOE). All applicants will receive fair and impartial consideration, without regard to race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, veteran status, genetic data, or any other basis covered by federal, state, or local law., • MegaMex Foods is an E-Verify employer. All applicants must be eligible to work in the United States without restrictions for any employer at any time., • All candidates are required to successfully pass a background check as a condition of employment.

Job Description Position Overview: The National Technical Support Engineer is responsible for providing technical support and training on a national basis. As the technical specialist, he/she is the go-to person during installations, modifications, and escalations for all Böwe product lines. He/she is the second line of support on all hardware and software upgrades, maintenance, and emergencies. The TSE is responsible for investigating and resolving customer reports of technical issues with equipment, and eliminating future operational or service difficulties for customers. Essential Job Functions: • Provides on-site technical assistance to help troubleshoot and repair equipment in a reasonable amount of time. Provides a communication link between the customer and Director of National Technical Support to help ensure that effective service is provided to all involved parties., • Provides direct support to customers and Böwe service personnel on all Böwe products; guides and supports customer service engineers; provides training on Böwe products to the customer and technicians as necessary., • Provides second tier troubleshooting on hardware and software problems within specified product lines in conjunction with local customer service engineers; providing technical assistance via phone or at customer sites., • Creates and maintains Product Performance Reports; developing and presenting recommendations on short and long term problem resolutions; maintains a Field Problem log /listing for supervisors and customers; recommends improvements to product design, and keeps management informed of any customer or equipment hardware and software concerns. Provides weekly written feedback about site performance and site issues and maintain site performance reporting., • Provides expert level technical support during new product installation and field conversions or modifications by installing, performing system evaluations and machine validation., • Expands technical knowledge of CSE’s by assessing job skills; identifying training requirements; developing and presenting training classes in the field when needed., • Enhance technical knowledge for service personnel by creating, organizing, reviewing, and updating service documentation, bulletins, retrofit instruction, system machine schematics, etc., • Responsible for delivering and facilitating technical training regarding use and maintenance of old and new Böwe product lines; conducts job task, and training needs analysis at the customer site for customers and service personnel. Regarded as a product specialist., • Actively interface with our parent Böwe Systec GmbH Augsburg (BSA) on technical and development issues., • Fosters positive relationships by communicating with customers and the local teams; responding to complaints/inquires in a cooperative, supportive, and professional manner; negotiating problem resolution; resolving problems in a timely and efficient manner; acting as liaison between the customers, field service, engineering, manufacturing, quality assurance, and other departments within the company to resolve problems. Keeps service team members and customers informed of on-site arrival times, etc., • Provides emergency customer assistance, responds to emergency and non-scheduled calls for service within established response time goals. Perform off-hour tasks if the need arises, per customer schedule and/or request, • Contributes to the team/work group efforts to provide the highest quality of support to the customer by assisting/ supporting in preventive maintenance completions, installations, complex repairs, field changes, upgrades, moves/relocations, and other related tasks in a cooperative/supportive manner., • Other items / duties to jointly be developed when the need arises, • Associate degree or equivalent experience in technical field with 5+ years of advanced mechanical/electronic/software training in mail processing equipment experience required., • Associate degree or equivalent in digital electronics, networking, or related field. Must be an expert in use and maintenance of all Böwe product lines., • Excellent analytical, problem solving, and troubleshooting skills, ability to read and interpret technical drawing and documentation, good project management skills., • Strong interpersonal/customer relations’ skills, clear verbal and written communications, • Proficiency on PC multiple operating systems. Excellent computer skills: Windows, Windows Server, Word and Excel, Project, DB2, HTML, Domain, and the ability to work under minimal supervision and lead project teams., • Ability to layout, maintain, and troubleshoot Networks as they relate to Böwe product lines as well as other product lines covered by Böwe., • Must have extensive experience with Bowe products or equivalent, • Possess strong electromechanical skills and problem solving/troubleshooting abilities, • Must have the ability to respond and adjust to changing or new situations. Work well in high stress environments and maintain professionalism in dealing with customers and co-workers. Needs to be a self-starter and have the ability to work in unsupervised settings., • Must be able to troubleshoot mechanical, electronic, and operational aspects of machines. Responsible for machine service and concentrates on problem solving and preventative maintenance. Excellent customer service skills., • Ability to make travel arrangements within company policy guidelines and in the most cost effective and time efficient manner possible. Travel arrangement will include: hotel, car rental and airline flights, • This position will travel up to 75% of the time. Schedule needs to be flexible to accommodate customer’s schedules. Willing to work outside normal business hours as job dictates. May be required to do shift work and/or extended hours.

Job Description We are looking for a Network Engineer to design, implement, maintain, and support our growing network infrastructure. You will be part of a systems engineering team that is responsible for designing and developing scalable, maintainable, highly available network architectures that meet business objectives and SLAs. Responsibilities • Configure and install various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS), • Perform network maintenance and system upgrades including service packs, patches, hotfixes and security configurations, • Monitor performance and ensure system availability and reliability, • Monitor system resource utilization, trending, and capacity planning, • Provide Level-2/3 support and troubleshooting to resolve issues, • Work within the established configuration and change management policies to ensure awareness, approval and success of changes made to the network infrastructure, • Select and implement security tools, policies, and procedures in conjunction with the company’s security team, • Liaise with vendors and other IT personnel for problem resolution Requirements • Proven hands-on network engineering experience, • CCNP or higher (CCIE and/or CISSP highly valued), • Deep understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS), • Solid understanding of the OSI or TCP/IP model, • Hands-on experience with monitoring, network diagnostic and network analytics tools, • University degree in Computer Science or a related subject Note: U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time.

Job Description About Wilson Connectivity: Join the team at Wilson Connectivity and be a part of our mission to connect everyone, everywhere! As the industry leader in wireless connectivity solutions, we're bringing 5G connectivity to businesses and consumers in their homes, workplaces, and beyond. But we're not just committed to developing innovative products - we're dedicated to developing great people. That's why we've been recognized as a "Best Companies to Work For" six times by Utah Business. Our strong work culture drives high employee satisfaction, and we're looking for individuals who are passionate about making a positive impact. Position Overview: We are looking for an experienced Embedded Software Engineer that is responsible for the development and maintenance of embedded RF firmware and application software in RF signal amplifiers/repeaters. The engineer will participate in all phases of software development, including requirements analysis, algorithm design, coding, integration, testing and documentation. The engineer will adhere to team development standards for software processes and work as a part of a multi-disciplinary, multi-site team. The engineer will contribute to multiple application development specialties, including user interface development, mathematical and logical algorithm development, database structure design, and both RTOS and bare metal programming. Position benefits: This full-time position has a competitive salary based on experience, plus the opportunity to earn an additional company bonus based on company and individual performance every 6 months. This position will be based in Richardson, TX and reports to our Sr. Software Engineering Manager based in Richardson, TX. Our employees enjoy a total rewards benefit package including a highly competitive salary and bonus plan, generous 3 weeks of PTO starting on day one, 10 paid holidays, matching 401k, health insurance, tuition reimbursement, paid parental leave, wellness programs, employer paid disability and telemedicine. A day on the job may include: • Design and implement new firmware for multiple architectures and platforms, unifying functions when possible., • Design and implement new features and algorithms into RF signal amplifiers/repeaters., • Design and develop custom firmware to support new product prototypes and advance technology., • Develop initial board bring-up firmware for testing embedded RF system hardware., • Identify and implement improvements to existing/legacy product firmware., • Support released firmware in the field as needed., • Perform software integration and validation testing with hardware systems, • Document software functionality (theory of operation), • Develop and implement automated test procedures to streamline standard RF test functions., • Contribute to the system design of new RF products, • Minimum of 5 years in a similar position, • B.S. degree or higher in Computer Engineering, Computer Science, Electrical Engineering, or related STEM major, • Demonstrated experience with microprocessors through full product life cycle, • Extensive skill in structured firmware design, documentation, and coding standards / best practices, • Extensive knowledge of C/C++ in embedded platforms, • Experience working with communication protocols, device drivers, and sensors, • Experience working with a variety of 8, 16, and 32-bit microprocessors (STM, Microchip, etc.), • Experience working on consumer products, • Knowledge of communication devices and components, wireless RF devices, and RF theory, • Hands-on experience troubleshooting problems that occur in electronic RF systems at the component level, • Knowledge in the sending and receiving of packets through communications protocols such as I2C, SPI, and RS232, • Software development experience with cellular RF and/or IoT products, • Experience using electronics test equipment such as Oscilloscopes, Digital Multimeters, Network Analyzers, Spectrum Analyzers, Signal Generators, and Logic Analyzers, • Experience in web development, • Must be familiar with Source Code Version Control tools, • Must be familiar with Bug/Issue Tracking tools, • Must be well organized, timely, and detail oriented, • Must be able to work independently and within a team with minimum supervision and able to understand and resolve issues with minimal assistance, • Must be able to multi-task simultaneous projects/assignments, • Must be able to communicate clearly and effectively, keeping team members and management informed of progress and issues A background check and drug screen is required upon accepting an offer of employment. Job Posted by ApplicantPro

Job DescriptionDescription: Position Summary The ASP.NET Software Developer is a mid-level position reporting to the Sr. Software Engineer in the IT department. Core Responsibilities • Assist in the design, development, and maintenance of web applications using ASP.NET (MVC/Web API), • Write and optimize SQL queries, stored procedures, and database objects using SQL Server, • Participate in code reviews, debugging, and unit testing to ensure code quality, • Collaborate with cross-functional teams to gather requirements and deliver solutions, • Implement and maintain CI/CD pipelines using Azure DevOps to automate builds, tests, and deployments, • Document technical specifications and user guides, • Learn and apply best practices in software development and DevOps workflows, • Troubleshoot and resolve application and system issues in a timely manner., • Stay current with emerging technologies and development practices Requirements: Qualifications • Minimum 2 years of professional experience in ASP.NET (preferably MVC and/or Web API) development, • Strong expertise in SQL Server, including query optimization and database design, • Solid experience setting up and managing Azure DevOps Pipelines for CI/CD, • Proficient in version control systems such as Git, • Strong problem-solving and analytical skills, • Good communication and teamwork skills, • Bachelor’s degree in computer science, Engineering, or related field (or in progress), • Exposure to front-end technologies, e.g., HTML, CSS, Kendo), • Exposure to Microsoft Azure services (App Services, Functions, Key Vault, etc.), • Experience working in an Agile/Scrum development environment

Job DescriptionSalary: Name of Position: Lean Manufacturing Engineer Scope of Position: Reporting directly to the Vice President of Supply Chain and Production, the Lean Manufacturing Engineer is a critical leader in optimizing manufacturing processes, improving efficiency, and driving lean initiatives. In this role, you'll utilize your expertise in product design, materials, tooling, and process development to support innovative solutions in the production of industrial HVAC equipment. Essential Duties and Responsibilities: Optimize Workforce and Workflow: Analyze and strategize workforce utilization, space requirements, and equipment/workspace layouts to maximize efficiency and productivity. Enhance Production Processes: Develop and implement product staging areas, kits, kitting carts/containers, and kanban systems to streamline workflow, reduce labor times, and eliminate waste (Muda). Drive Factory Optimization: Develop, update, and manage factory layouts, work instructions, ISO procedures, and optimize work centers to align with dynamic production requirements. Lead Continuous Improvement Initiatives: Proactively identify opportunities for enhancement, develop strategic plans, and lead the implementation of lean manufacturing principles and continuous improvement activities across the organization. Effectively utilize and document Kaizen events to foster operational excellence and drive measurable results Foster Lean Culture: Coach and mentor team members at all levels on lean principles, fostering a culture of efficiency and collaboration. Ensure Documentation Accuracy: Review and inspect production engineering release documentation to ensure accuracy and prevent errors from reaching the production floor. Collaborate on Production Planning: Work closely with plant supervisors and lead personnel to review documentation and develop efficient plans for producing industrial HVAC equipment. Analyze and Manage Resources: Maintain and analyze databases related to labor hours and materials across work centers to accurately estimate production times and enhance routing precision. Solve Production Challenges: Perform root cause analysis on production challenges and product defects and implement actionable solutions. Develop Advanced Manufacturing Processes: Research product requirements, testing methods, and collaborate with vendors to develop innovative and efficient manufacturing processes. Support New Product Development: Contribute to product development by communicating manufacturing capabilities, tooling constraints, and feasibility to ensure successful integration. Boost Fabrication Capacity: Support fabrication by managing CNC programming and assisting with turret punch press and fiber optic laser programming as needed. Coordinate Equipment Maintenance: Partner with the maintenance team to ensure production equipment remains operational and effectively serviced. Champion Quality Standards: Adhere to and promote all Quality and Environmental Management System policies, objectives, and obligations. Research and Support Initiatives: Collaborate on engineering activities and research projects to drive innovation and operational success. Adapt to Organizational Needs: Perform additional related duties and responsibilities as assigned to support manufacturing goals. Position Requirements: Education: Bachelors degree in industrial, Manufacturing, Mechanical Engineering, or a related field is required. Experience: Minimum of 3 years of experience in a manufacturing environment, preferably involving sheet metal fabrication and assembly. Technical Expertise: Strong proficiency in manufacturing processes and methodologies, with advanced technical knowledge in lean principles and process optimization. Software Proficiency: Competency in Microsoft Office Suite is required. Experience with Autodesk Inventor software and CNC programming (turret punch presses and fiber optic laser) is highly preferred. Analytical Skills: Exceptional analytical skills with the ability to assess complex problems, interpret data, and make informed decisions. Problem-Solving Abilities: Proven track record of solving production challenges and improving operational efficiency. Project Management Skills: Ability to manage multiple projects effectively, prioritize tasks, and meet deadlines in a fast-paced environment. Leadership Qualities: Capable of leading cross-functional teams, mentoring others, and driving initiatives independently. Communication Skills: Excellent written and verbal communication skills, with the ability to collaborate and convey technical information to diverse teams

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About the Role: As a Lead Engineer, you will provide leadership and senior-level engineering/technical expertise on complex electric transmission design projects for high-voltage (HV) and extra high-voltage (EHV) overhead utility systems. Some of the main responsibilities will be to ensure the team is meeting client requirements; both quality and schedule deadlines as well as ensuring the team is engaged and their input is valued. We want to inspire our team members to produce at the level of excellence for which Pickett is known. This role will require you to be hands-on and manage, prepare, review and/or provide guidance for line routing, survey coordination, PLS-CADD modeling, structure design, foundation design, clearance checks, plan/profile development, material specification and procurement, constructability evaluations, work order package preparation, permitting, vendor/subcontractor coordination and construction support. What You Will Be Doing: • Supervise a team of engineers, technicians, and drafters, • Communicate clear expectations, goals, and vision, • Manage the performance of the team and delegate project work, • Motivate, coach and mentor team members, • Manage projects, ensure quality of work and on-time delivery, • Review and approve engineering design submittals, • Develop lasting relationships with clients, • Estimate projects and develop proposalsWhat You Bring:, • Bachelor’s degree in Engineering (required), • Professional Engineer (PE) certification (required), • 10+ years of related transmission line engineering experience in the electric utility industry (required), • Extensive experience using PLS-CADD (required), • Experience with PLS-TOWER (preferred), • Extensive experience with design codes and standards such as: NESC, IEEE, ASCE and ACI, • Extensive experience liaising with substation, environmental, real estate, construction, and maintenance stakeholders, • Deep understanding of industry standards and methods (engineering, procurement, and construction), • Strong project management skills and experience, • Ability to work in a safe manner and always obey safety regulations, • Adept self-starter who thrives in an unstructured, varied and deadline-driven work environment, • Strong leadership skills and ability to coach other team members and provide direction for projects, • Strong ability to collaborate with team members as well as peers in the electrical utility industry, • Effective business and technical communication skills (verbal, written and presentation) You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description You are a P.E. with a B.S. in Mechanical Engineering and 10+ years of hands-on manufacturing and production experience. You have a comprehensive understanding of plant and/or process engineering. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Mechanical Engineer – Industrial/Manufacturing Expert, you will: • Investigate incidents involving equipment, safety products/procedures, material handling, hand tools, & plant layouts., • Analyze inadequacies in machine guarding, instructions, warnings, or personal protective equipment (PPE), etc., applying your comprehensive knowledge of standards and practices., • Write clear, scientifically sound reports., • Provide expert testimony. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: • Make a tangible difference., • Continuously learn and grow., • Collaborate with highly respected experts. LOCATION: Dallas/Fort Worth/Irving, TX area REQUIREMENTS: • You have a Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering and/or at closely-related field., • You are a licensed Professional Engineer (P.E.) or can obtain licensure in at least one state within six months., • You have 10+ years of manufacturing and production experience, including design, installation, start-up, commissioning, operation, maintenance, and troubleshooting spanning a variety of industrial equipment., • Your expertise must include design or specification of industrial equipment, material handling equipment (such as forklifts, aerial lifts, and cranes), industrial facility operation and maintenance processes, utility systems (steam, water, air, gas, etc.), and manufacturing processes., • Your experience and training in reliability-centered maintenance (RCM), failure mode and effect analysis (FMEA), root cause failure analysis, site incident investigations, and hazard analysis/risk assessments is desirable., • You can work both independently and as part of a collaborative team., • You can manage a portfolio of 40-60 projects/clients., • You have excellent technical, analytical, writing, and communication skills., • You are willing to travel about 20% on average., • You have a valid driver’s license and the ability to drive., • Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Job DescriptionSystems Test Engineer Tellabs Enterprise, Inc. Locations: Carrollton Tx. HQ Travel: 0-20% Tellabs, the world leader in the Passive Optical LAN marketplace is defining the future of networking across enterprise, and government. We're focused on expanding on that leadership and keeping people connected today and, as the world continues to change, tomorrow. You will be responsible for the development and ongoing maintenance of test strategies, specifications, and plans. You will contribute to the design, build and implementation of test automation suites that provide testing of the Tellabs products. As part of a small team, your creative product test will directly support the customer experience and advance our leadership in this growing market. Title: Systems Test Engineer Essential Job Responsibilities • Development and ongoing maintenance of project test strategies, specifications and plans, • Be able to contribute to the design and build of a test automation suite that provides daily rigorous testing of the product, • Timely execution of test plans and test cases either manually or using test automation, • Report hardware and software defects and proactively work with the development engineers to debug and correct them. Required Education • Bachelor’s degree in engineering or equivalent technical training with 3+ years related experience. Required Experience • 3 or more years of previous work experience in WAN/LAN/OLAN testing or equivalent experience in technical training and or continuing education, • Working experience of Networking (OSI model and protocols) with a focus on L2 (e.g. LLDP, xSTP, ACLs, MAB, 802.1x), • Participated in automated test development with a preference to using Quali Systems Cloudshell/Testshell automation development tools, • Expertise in Python programming language and script generation, • Strong technical, analytical and testing skills, • Self-motivated and able to manage multiple tasks with little supervision, • Be a fast learner who quickly assimilates the Tellabs products and testing environment to become a team player who immediately adds value to the evolving automation test environment, • Knowledge of overlaying GPON, XGPON and NGPON services onto a single fiber would be beneficial Only fully complete submissions will be reviewed for consideration. No relocation provided. No sponsorship provided. Tellabs participates in E-Verify and is an Equal Opportunity Employer. .Qualified candidates should apply at

Job DescriptionComprehensive Benefits Plan, 401 (k), Paid Time Off This Jobot Job is hosted by: Katie Whittington Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $25 - $30 per hour A bit about us: Based in Dallas, Texas, we are a Best in Class Property Management and Leasing Company. Our core values are centered around our people and our clients. We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as primary partners! If you are an experienced Building Engineer, then please apply! Why join us? • Comprehensive Benefits, • 401 (k), • Paid Time Off Job Details Job Details: We are seeking a highly skilled and experienced Building Engineer to join our dynamic team. This is an exciting opportunity to work on multi-tenant class A & B office buildings, where you will be responsible for ensuring the smooth operation and maintenance of the building's infrastructure. This includes HVAC systems, electrical, plumbing, and more. The ideal candidate will have a keen eye for detail, a problem-solving mindset, and a hands-on approach to their work. Responsibilities: As a Building Engineer, you will be tasked with the following: 1. Oversee and maintain all building systems, including HVAC, electrical, plumbing, and mechanical., 2. Conduct regular inspections and perform preventative maintenance on systems and equipment., 3. Respond to emergency situations promptly and efficiently to minimize downtime., 4. Perform repairs on commercial office buildings, including carpentry, painting, and hardware installation., 5. Troubleshoot and diagnose issues with refrigeration systems, motors, relays, hydraulics, pneumatics, and more., 6. Handle snow removal, housekeeping, and maintenance of roofs, drains, and ground equipment., 7. Utilize a smartphone for communication and task management., 8. Maintain a clean and safe work environment, adhering to all safety regulations., 9. Coordinate with external contractors when necessary. Qualifications: To be successful in this role, you will need: 1. A minimum of 3 years of direct experience working as a building engineer on multi-tenant class A & B office buildings within the last 5 years., 2. HVAC trade school certificate/degree preferred., 3. Experience working at a commercial property., 4. Proficiency in MS Office., 5. High School Diploma or GED equivalent., 6. Skills in soldering, carpentry, and snow removal., 7. Ability to use a smartphone for work purposes., 8. Strong troubleshooting and diagnostic skills., 9. Experience in housekeeping and repairs on commercial office buildings., 10. Knowledge of refrigeration systems, motors, relays, hydraulics, pneumatics., 11. Familiarity with mechanical, electrical, and plumbing systems., 12. Ability to paint walls, install door hardware, and maintain kitchen equipment., 13. Experience in maintaining roofs, drains, and shop and ground equipment., 14. A minimum of 5 years of experience in a related field., 15. Able to maintain great client relationships with tenants and address building needs as they arise If you are a hardworking professional with a strong technical background and a passion for problem-solving, we would love to hear from you! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Description We are looking for someone that is generalist at heart, one who is curious, appreciates complexity, knows or wants to learn when to step back and when to dive deep. We call this role a Cloud Service Reliability Engineer. The Cloud Service Reliability Engineer will be responsible for effective design, execution, and maintenance of systems implemented on premise or in the cloud, primarily focused on identity and access management, cloud computing services/integrations, and data analytics technologies. Responsibilities of the Cloud Service Reliability Engineer: • Establishes technology product specifications and collaborates with various functions to ensure successful product development and implementation., • Deploys, supports and monitors new and existing services, platforms, and application stacks., • Drives improvements to processes and design enhancements for automation to continuously improve the production environment., • The Cloud Service Reliability Engineer will be responsible for effective design, execution, and maintenance of systems implemented on premise or in the cloud, primarily focused on identity and access management, cloud computing services/integrations, and data analytics technologies, • Establishes technology product specifications and collaborates with various functions to ensure successful product development and implementation, • Deploys, supports and monitors new and existing services, platforms, and application stacks, • Drives improvements to processes and design enhancements for automation to continuously improve the production environment Skills and Experience • Minimum of 5 years of experience in automating infrastructure, service delivery, and engineering site reliability, maintaining infrastructure on premise and in cloud environment, • Product does not really matter (any of Puppet, Chef, Fabric, Ansible, Salt is fine), • Proven experience with cloud Platforms (Azure, AWS, GCP), PaaS, SaaS experience, • DevOps Tools (GitHub, GitHub Actions, Jenkins, Jira and other CI/CD Tools), • Configuration Management and infrastructure as a Code(Terraform, Ansible) experience, • Expertise in Active Directory Domain Services, Active Directory Federation Services (ADFS), and Active Directory Certificate Services

Job Description Raines Co. - Your Future is Now! You are the expert in building maintenance with a keen eye for the details. You know how to implement and manage a preventive maintenance program and respond to urgent maintenance events. Your leadership provides the maintenance team with direction and skills training. If you exhibit these qualities, Raines Co. will be a great opportunity for you to realize your full potential. Established in 1988 as a family-owned business, we have grown into a fully integrated development, management, and investment company that develops, operates, and owns the world’s leading hotel brands as well as boutique hotels. Raines has maintained a family-oriented culture that believes in building relationships with our associates, with our partners and within the communities where we operate. We offer comprehensive Medical/Dental/Vision benefits, 401K, a generous PTO program, and the opportunity to join a winning culture recognized for rewarding our best with opportunities to advance their career within the company. Position Summary: The Chief Engineer is responsible for the overall maintenance of all hotel facilities and directs, coordinates, and performs routine preventive and emergency repairs to obtain optimum efficiency and economy of hotel operations. Essential Job Functions • Train and supervise the hourly Engineering staff and coordinate all scheduling, • Review Engineering staff's worked hours for payroll compilation and submit to accounting on a timely basis, • Focus the Engineering Department on their role in contributing to the guest satisfaction, • Motivate coach counsel and discipline all Engineering personnel according to company standards, • Prepare and conduct all Engineering interviews and follow hiring procedures, • Attend weekly staff meetings and provide training on a rotational basis, • Respond to employee emergency situations using information contained in M.S.D. sheets. Keep M.S.D. sheets current and easily available (with Executive Housekeeper), • Establish ongoing training for all departments especially Housekeeping Front Desk and Kitchen to maintain basic upkeep of their departments and equipment, • Use company-wide tools, systems and applications without exception, • Adhere to budgeted expense allotments using proper procedures for all purchases and keep all necessary items (light bulbs name tags etc.) stocked, • Coordinate all inspections of life-safety systems including extinguishers smoke alarms etc. to maintain proper safety standards, • Manage energy expenses and continually work towards energy conservation, • Ensure that the Preventative Maintenance program is implemented and administered, • Evaluate and spot check the work of all staff and contractors or outside laborers, • Handle guestroom maintenance requests in a timely and efficient manner, • Maintain files of and be familiar with all operational manuals and warranty agreements for equipment, • Immediately follow up on any alarms to determine the exact location and cause; determine emergency status and report to Guest Services and/or the General Manager with findings, • Ensure that employees are at all times attentive friendly courteous and helpful to guests all other employees, • Act as emergency contact person, • Attend monthly all-employee meetings and any other functions required by management, • Coordinate fire drills and the training of all employees on safety procedures, • Establish and maintain key control system, • Conduct daily property tour of the hotel and exterior perimeter for debris and trash removal; Check the lighting and irrigation periodically Prior Chief Engineer and Supervisor experience Experience leading teams in all areas of maintenance Experience with brand standards Proficiency with basic hand-tools and power equipment Proficient in Microsoft 365 or similar computer applications Minimum High school diploma, GED or equivalent Current certifications as required by Federal, State or Local governing agents pertaining to trade requirements (HVAC, Pool Operation, etc) Raines is proud to be an Equal Opportunity Employer We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, disability, genetic information or any other protected characteristic as outlined by federal, state, or local laws. This description is a summary of primary responsibilities and qualifications. The job description is not intended to include all duties or qualifications that may be required now or in the future. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pre-employment background check required. EEO/D/V Application Tips: We encourage job seekers to protect themselves from email and recruiting scams. Please note: 1) We do not accept applications via email or fax; 2) We never ask for money as part of the application process; 3) We only contact job applicants from approved email domains.

Job Description MMR Project Engineer Company Culture: At MMR, our most valuable assets are not our buildings or equipment, it is our family of employees with diverse backgrounds and experiences. Our investment in training programs and resources allows our employees to reach both their personal and professional goals. This is evident with MMR receiving numerous awards including “Best Place to Work” and consistently being recognized as one of the top Engineering News Record’s “Annual Specialty Contractors.” Organization Description: MMR has served as the industry leader in instrumentation and electrical construction, maintenance, and technical services for over 30 years. Our diverse list of clients allows us the unique ability to work across industry lines in the oil and gas upstream and midstream as well as chemical and petrochemical downstream, industrial manufacturing, power generation, renewable energy, mission critical, heavy commercial, and energy storage sectors. MMR holds the proud distinction of being the largest privately owned “Open Shop” contractor in the United States with over 30 branch offices including global locations in Canada, Qatar, and South America. For more information, please visit our website: . Job Description: MMR is seeking Project Engineer candidates with a degree in Construction Management or industry related equivalent. The responsibilities would include, but not limited to, the following: * Assist with organization, planning, scheduling, and subcontractor scheduling of the project * Handle day to day issues with meeting deadlines within budget * Assist with developing job tracking systems including schedule, productivity, and cost * Maintaining and updating tracking systems, schedules, cost reports * Identifying and submitting RFI’s * Participate in weekly client update meetings * Prepare and submit weekly client update reports * Preparing and submitting change orders * Coordinating with site supervision to build work packages * Prepare and submit client invoices * Maintaining RFI log, change order log, invoice log, restraint log, drawing log, equipment log, material log * Updating schedule of values and preparing client invoices * Field material and equipment purchasing as required * The above is not an exhaustive list of duties, and you will be expected to perform different tasks as needed to align with the overall business objectives of the organization Required Skills and Qualifications: * BS in Construction Management or related field * At least 3-5 years relevant work experience * Experience in electrical and instrumentation construction preferred * Experience in industrial construction is preferred * Must have knowledge in estimating, scheduling, and purchasing * Ability to read and understand electrical drawing packages and specifications * Working knowledge of MS Office software * Experience with Primavera P6 preferred * Ability to read and understand a CPM schedule and identify critical paths * Ability to work independently, prioritize, organize, problem solve, and exercise good judgement with minimal supervision * Strong organizational and interpersonal skills * Able to work effectively under time pressure and/or deadline * Excellent verbal and written communication skills * Willingness to work flexible, varying hours, including evenings and weekends as needed * Regular and reliable attendance at work MMR Group, Inc. and its affiliated companies ("MMR") is an Equal Opportunity Employer and does not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class Powered by JazzHR KhsX8FR4EF

Job DescriptionCompany Description Fairmont Dallas, located in the Arts District of downtown Dallas, offers 545 elegant guestrooms and suites, with over 73,000 square feet of flexible meeting space. For over 50 years, Fairmont Dallas has been the setting for countless civic, social cultural, convention and corporate events, setting the stage for countless memories. Job Description This job will coordinate daily activities involving the operations of the Engineering department. This position reports to the Director of Engineering and Chief Engineer, adheres to Company standards and accepts other responsibilities as assigned. It is the responsibility of the Engineering Coordinator to assist in the day-to-day operations of the Engineering Department, including correspondence, preparing reports and assisting with dispatching calls, answering telephones (for entire office as required), maintaining files, assisting with month end and departmental records/logs. • Maintain complete knowledge of and comply with all departmental policies/service procedures/standards., • Maintain complete knowledge of correct maintenance and use of equipment. Use equipment only as intended., • Anticipate guests’ needs, respond promptly and acknowledge all guests, however busy and whatever time of day., • Maintain positive guest relations at all times., • Resolve guest complaints, ensuring guest satisfaction., • Monitor and maintain cleanliness, sanitation and organization of assigned work areas., • Access all functions of computer., • Set up workstation with necessary supplies and resource materials., • Read the logbook daily, and record all pertinent information in the logbook., • Check colleague attendance and document tardiness and absenteeism., • Complete supply requisitions and submit to Chief Engineer; stock and maintain par levels of necessary supplies., • Process purchase orders for approval and submit to Chief Engineer for approval., • Process invoices for payment and give copy to Chief Engineer and forward original to accounting., • Process accruals for end of the month and submit to Chief Engineer and accounting., • Open office and prioritize assignments and tasks for the shift., • Answer telephone., • Screen calls for the Director of Engineering and the Chief Engineer as requested., • Make telephone calls to specified individuals as requested by the Director of Engineering and the Chief Engineer., • Greet all individuals arriving at engineering department and assist with their needs., • Document and maintain appointment calendar for the Director of Engineering and the Chief Engineer., • Maintain accurate trace files and communicate daily traces to the Director of Engineering and the Chief Engineer., • Establish and maintain filing procedures., • Maintain a contact list of all contractors and vendors.Qualifications, • High school graduate., • 3 years administrative assistant experience., • Fluency in English both verbal and non-verbal., • Provide legible communication and directions., • Compute basic mathematical calculations (add, subtract, multiply and divide numbers)., • Ability to:, • work with Dayforce, Word, Excel., • type 50-60 wpm accurately., • perform job functions with attention to detail, speed and accuracy., • prioritize, organize and follow up., • be a clear thinker, remaining calm and resolving problems using good judgement., • follow directions thoroughly., • understand guest’s service needs., • work cohesively with co-workers as part of a team., • work with minimal supervision., • maintain confidentiality of guest information and pertinent hotel data. Additional Information What’s in it for you: • Paid time off, • Medical, Dental and Vision Insurance, 401K, • Complimentary Shift Meal, • Employee benefit card offering discounted rates in Accor worldwide, • Learning programs through our Academy designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, such as Planet 21, • Career development opportunities with national and international promotion opportunities

Job Description Building Engineer - DFW Up to $40/hr Job Description The Building Engineer is responsible for ensuring the efficient operation and maintenance of mechanical, electrical, and plumbing equipment and systems for the assigned properties. This includes maintaining a clean and safe working environment, conducting routine assessments, performing day-to-day preventive and corrective maintenance, painting, and housekeeping. Responsibilities • Perform all plumbing, electrical, and HVAC tasks required for facility operation and maintenance., • Service and maintain HVAC equipment such as heating systems, chillers, DX units, pumps, cooling towers, fan coil units, VAVs, and air distribution systems., • Monitor and adjust mechanical and pneumatic systems to ensure optimal comfort within the building., • Conduct field inspections and perform necessary repairs or adjustments to maintain operational integrity., • Monitor building energy usage and support initiatives to improve efficiency., • Repair and maintain doors, ceilings, hand railings, floors, and other structural elements throughout the property., • Service plumbing fixtures such as toilets, urinals, flush valves, and lavatories., • Carry out scheduled maintenance tasks in line with building protocols and industry best practices., • Inspect engine rooms, fan rooms, cooling towers, motors, pumps, electric rooms, backup generators, fire pumps, sump, and ejector pumps regularly., • Replace lamps and fixtures, update signage, and ensure all rooms are clean and free of obstructions., • Proficiency in electrical, plumbing, HVAC, and facility maintenance., • Ability to troubleshoot refrigeration systems and HVAC equipment., • Experience with preventive maintenance and repair of facilities., • Experience with building maintenance and energy management systems., • Ability to perform inspections and adjustments to maintain operational integrity., • Proficiency in lighting and signage maintenance. We offer a path to permanent employment following successful completion of a probationary period. Join a team that values professional growth and development in a supportive and dynamic work environment. Work Environment The work environment involves maintaining and servicing various mechanical, electrical, and plumbing systems. It requires physical activity, including routine inspections and maintenance in various parts of the facility. The role supports a collaborative team atmosphere in a technically advanced setting. Job Type & Location This is a Contract position based out of Grand Prairie, Texas. Pay and Benefits The pay range for this position is $33.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Grand Prairie,TX. Application Deadline This position is anticipated to close on Oct 13, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Who We Are: We are a full-service commercial real estate firm serving Austin, San Antonio, Dallas, and Houston with 30 years of experience developing, managing, and investing in commercial real estate. This 360-degree perspective gives us the expertise to maximize investment value while navigating through any real estate challenge. Backed by the best staff in the industry, our mission is to build trusting relationships with our clients through proven results, professional integrity, and exceptional service. Purpose / Summary of Position: The Mobile Engineer is an essential role at HPI. The Mobile Engineer is responsible for the operation, inspection, and preventive maintenance of various facility systems including HVAC, mechanical, electrical, and plumbing. Responsible for the maintenance and operation of all building equipment to ensure the operation of equipment is within design capabilities and to achieve proper environmental conditions prescribed by the building management. Priority functions / Responsibilities: • Acknowledge and respond to service requests by diagnosing and performing minor and routine maintenance/repair in a timely and professional manner. Strive to complete all service requests daily and accurately documented, including parts, in work order system., • Ensure the performance of equipment with preventive maintenance as prescribed by manufacturer's recommendations and specifications., • Responsible for all housekeeping functions and maintaining the professional appearances of equipment and maintenance spaces., • Review building operations, preventive maintenance, training, energy management and equipment status on a frequent basis., • Responsible for maintaining the building lighting system, including element and ballast repairs or replacements., • Other duties may include but not limited to moving furniture, fixtures and office partitions repairing locks, doors, hinges, furniture, and other miscellaneous items. The repair and painting of all types of surfaces, indoors and out., • The monthly inspection of fire extinguishers and/or other life/safe inspections. Various building maintenance duties as assigned by the property management., • Operation, maintenance, and repair of sanitary sewer systems, including sump pumps, basins, toilets, urinals, and piping., • Maintenance and repair of trash compactors, including electrical and hydraulic systems., • Maintenance and repair of kitchen equipment., • Complete or oversee the completion of preventative maintenance as assigned. Maintain accurate records within preventative maintenance system., • 3-5 years related experience and/or training or equivalent combination of education and experience, • Required to furnish current, valid driver’s license and proof of insurance, meeting minimum state of Texas requirement. If required to use own vehicle, remain compliant with applicable vehicular regulations including valid insurance and follow all company driving and safety requirements and procedures for transportation between properties, if individual has multiple property responsibilities. If using company vehicle, must remain insurable through the company’s carrier while employed, in addition to meeting personal vehicle requirement. Must inform HR of any change in driving status throughout employment and provide updated copies of license and certificates upon renewal., • Keep updated and adhere to Company policies, standard operating procedures, Work Order and Preventative Maintenance System, Uniform Policies, Safety Handbook, etc., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. However, individual must have the ability to lift 100 lbs. necessary for installation and removal of equipment., • While performing the duties of this job, the employee is most of the time outside in all weather conditions. The employee is regularly required to walk, talk, and/or hear. The employee is frequently required to stand; use hands to finger, handle or feel objects, tools, or controls; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and reach with their hands and arms., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Perform effective emergency maintenance (after hours) as required., • High School diploma or GED equivalent required., • Basic skills with Microsoft Office Outlook., • Excellent written and verbal communication skills. Strong organizational and analytical skills. Ability to provide efficient, timely, reliable, and courteous service to customers., • Abilities to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form., • Abilities to read, analyze and interpret general business periodicals, professional journals, blueprints, schematics, technical procedures, or governmental regulations. Ability to write repairs, business correspondence and procedure manuals. The employee should also be able to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Exercise independent judgment within general policy guidelines., • EPA 608 Certification required within six months., • Will be “on call” rotation with other team members. Must carry work phone and be prepared to work and service requests, including emergencies while on call, will be on call rotation with one or more others, required to learn and cover other properties accordingly., • Positive feedback from internal and external customer is a requirement of this role. Our values of passion, teamwork, and a Texas-sized competitive spirit are what make our team the best in the industry. We take pride in our homegrown culture that encourages opportunities for professional and personal growth. If you share these values and are looking to work for the leading commercial real estate firm in Texas, you have come to the right place. We invest into our employees and offer exceptional benefits like: • Health, dental and vision insurance, • 401k with a safe harbor company match, • PTO and paid company holidays, • Paid life insurance

Job Description Required • 10+ years in cybersecurity with 5+ years in cloud security and Microsoft Purview. Education in leu of experience will be considered., • Deep expertise in Azure security architecture, Conditional Access, Microsoft 365 Compliance Center and Microsoft Purview suite of tools with an emphasis on Information Protection and DLP., • Proven experience implementing enterprise-grade DLP and Information Protection policies. Preferred • Bachelor's degree in information technology, cybersecurity, information assurance or similar., • Certifications: CISSP, CISM, Microsoft Certified: Information Protection Administrator Associate, Azure Security Engineer Associate., • Experience with scripting (PowerShell, KQL) and automation of security controls., • Familiarity with eDiscovery. Responsibilities: • Soft Title: Principal Cloud Security Engineer, • Location: Budapest preferred, but also considering US (Irving, TX)., • Office Arrangement: Hybrid Secure Azure Configuration • Regularly evaluate, recommend and implement Azure security policies that protect from cyber-attack as well as ensure changes to Azure are consistent with company policy., • Assist with the implementation and maintenance of Azure Conditional Access Policies, including device compliance and risk-based sign-in controls., • Assist with the configuration of Azure AD (Entra ID) for identity protection, hybrid join scenarios, and secure access to cloud resources., • Microsoft Purview & Data Protection, • Architect and manage Purview tools including Information Protection, DLP, and Data Security Posture Management., • Configure and maintains sensitivity labels, trainable classifiers, and oversharing assessments for SharePoint and Exchange., • Serve as the Subject Matter Expert (SME) for data protection initiatives. Security Operations & Incident Response • Provide SME support to the Security Operations (SecOps) Team when evaluating cloud/Azure security-related events., • Coordinate and support the SecOps team or 3rd party vendors for high-priority incident response and investigations., • Assist the SecOps team in the development and maintenance of cloud/Azure related playbooks for detecting and responding to cyber-attacks. Governance & Compliance • Align cloud/Azure security controls with company policies and standards., • Ensure compliance with ISO 27001, NIST CSF, GDPR, and other global regulations., • Support audits and assessments. Training & Enablement • Deliver training on secure cloud practices and Purview usage to technical teams and business units., • Mentor junior engineers and serve as a subject matter expert for cloud data protection.

Job Description We are currently seeking experienced Maintenance Technicians / Taskforce Chief Engineers to lead and perform essential maintenance and engineering operations at our hotels. This is a key role that ensures guest and employee safety, comfort, and compliance with regulatory standards. Key Responsibilities Include: Maintenance Operations * Perform repairs and upkeep of hotel interiors/exteriors, including plumbing, electrical, HVAC, refrigeration, and water treatment systems. * Execute preventive maintenance programs and ensure all tools and equipment are operational. * Manage renovations, coordinate with contractors, and oversee timelines and budgets. Guest Experience * Respond promptly to guest requests and maintain a safe and secure environment for all hotel occupants. Team & Department Leadership * Organize work schedules, train staff, and foster communication with other departments to support smooth operations. Financial & Inventory Management * Monitor budgets, control expenses, and manage tools and supplies efficiently. Required Skills & Qualifications: * Strong knowledge of plumbing, HVAC, electrical systems, and general building maintenance. * Preferred certifications: Level 3 EPA, HVAC certification, or licensed plumber/journeyman electrician. * Physical ability to perform demanding tasks and flexibility to work varied shifts. * At least 4 years of building maintenance or construction experience, including supervisory responsibilities. * Hotel maintenance experience strongly preferred. * Experience with Transcendent Software required. Additional Information: This position may involve travel. For out-of-town assignments, room and board will be provided. You may be placed in full-service or extended-stay hotels, including those with unique maintenance needs due to age or structure. If you are interested in this opportunity, we’d love to connect and discuss the next steps. Please let us know your availability for a brief call. Company DescriptionA nationwide company that specializes in staffing for the hospitality industry since 1990. Today, Hospitality Staffing is recognized as the industry leader. Our commitment to hospitality staffing has earned the trust and respect of the best hotel brands in the business, including four and five-diamond properties. We attribute this, in part, to the fact that each member of our management team has worked in and around the hotel industry. They understand the pressure to provide superior service while cutting costs and work daily to deliver just such a solution. Recruiting superior talent is equally responsible for our success. Grassroots recruiting allows us to carefully screen for the proper attitude, skill sets, and work ethic. Clients and guests note our diligence and care. All personnel are Hospitality Staffing employees, so we have a different relationship with them. We offer entry-level positions with the opportunity to advance into supervisory or managerial roles, but we expect professional and ethicalA nationwide company that specializes in staffing for the hospitality industry since 1990. Today, Hospitality Staffing is recognized as the industry leader. Our commitment to hospitality staffing has earned the trust and respect of the best hotel brands in the business, including four and five-diamond properties. We attribute this, in part, to the fact that each member of our management team has worked in and around the hotel industry. They understand the pressure to provide superior service while cutting costs and work daily to deliver just such a solution.\r\n\r\nRecruiting superior talent is equally responsible for our success. Grassroots recruiting allows us to carefully screen for the proper attitude, skill sets, and work ethic. Clients and guests note our diligence and care.\r\n\r\nAll personnel are Hospitality Staffing employees, so we have a different relationship with them. We offer entry-level positions with the opportunity to advance into supervisory or managerial roles, but we expect professional and ethical

Job Description Start your Warwick Journey and help preserve a beautiful piece of Dallas History! Our Maintenance team is in search of experienced persons to join their team. Our team is focused on keeping our Historic Dallas Landmark in great condition. Come join us as we celebrate 100 years! Expectations include but are not limited to understanding of equipment and systems found in a hotel, routine maintenance of all public spaces, meeting rooms, guest rooms and grounds, and completing repairs and replacement of any equipment necessary. POSITION PURPOSE Maintain the entire hotel facility, including the physical building structure, all mechanical, electrical, HVAC systems, and related equipment in accordance with energy conservation and preventative maintenance programs. Ensure the upkeep of guest areas to maintain an attractive hotel. ESSENTIAL FUNCTIONS Complete work orders and visually assess the safe and efficient maintenance and operation of the physical structure(s) of the hotel, all mechanical, electrical, HVAC systems and any other related equipment. Completion of all routine maintenance on public spaces, meeting rooms, ballrooms, outlets, back of the house spaces, and grounds. Completion of all repairs, replacement, and renovation projects to offices and employee work areas. Adhere to all corporate-required purchasing policies and controls, including, but not limited to, all outside contractor bids, budgets, and schedules. Follow prescribed safety procedures for personnel and equipment by the company and OSHA. Work with the Chief Engineer to maintain effective Energy Management and Preventive Maintenance programs and conduct special training for other operating departments on the safe and efficient use of equipment and energy in the hotel. Inform the General Manager and hotel department heads on a regular basis regarding the specific and overall condition of the building structure(s), related systems, and equipment offering prudent, cost effective proposals for maintaining these systems. Access and input information into a computer and generate reports (if applicable). Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Employees with irregular attendance will be subject to disciplinary action, up to and including termination of employment. Due to the cyclical nature of the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings is required. Upon employment, all employees are required to fully comply with hotel rules and regulations for the safe and effective operation of the hotel facilities. Employees who violate hotel rules and regulations will be subject to disciplinary action, up to and including termination of employment. SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: Make necessary repairs and maintenance throughout the hotel. Prepare technical data, bidding, project work, alterations, and repairs for properties. Must have basic knowledge of building codes. Actively train in fire prevention, environmental health and safety and engineering systems. Attend morning walk arounds as required. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills and abilities: Must be able to speak, read, write and understand the primary language(s) used in the workplace. Must be able to read and write to facilitate the communication process. Most tasks are performed in a team environment with the employee acting as a team leader. There is minimal direct supervision. Knowledge of all types of mechanical equipment such as chillers, boilers, water softeners, and refrigeration equipment is preferred Knowledge of plumbing and electrical systems, maintenance of records of power, water and fuel consumption is preferred Full time employees are eligible for medical, dental and vision insurance in addition to supplemental plans. The hotel provides complimentary meal and parking for al employees. Le Spa by Warwick also offers a 50% discount on all treatments and 30% of products.

Job DescriptionCompany Description Fairmont Dallas, located in the Arts District of downtown Dallas, offers 545 elegant guestrooms and suites, with over 73,000 square feet of flexible meeting space. For over 50 years, Fairmont Dallas has been the setting for countless civic, social cultural, convention and corporate events, setting the stage for countless memories. Job Description Focused on all areas of technology services with a key focus on hardware, operating systems and security. This role requires proficiency in all aspects of Technology, from network infrastructure maintenance and deployment to user ticket resolutions and assistance to hotel employees, while ensuring adherence to standards required by corporate policies. • Consistently offers professional, engaging and friendly service, • Coordinate, manage and ensure that all daily hotel user service technology tickets are dealt with on a timely and accurate basis, including 3rd party SLA support, • Assist in the integration of hotel hardware and software technology, • Maintain compliance with technology standards and follow risk management practices following applicable policies and procedures outlined in the company standard Policies and Procedures, • Provide a high level of operational stability for property-based technology, • Maintain IT Systems disaster recovery and Daily Backup Logs, • Track and maintain all employee workstations, laptops and peripherals, ensuring compliance with the standard, using the Accor imaging process, with an emphasis on anticipating employee needs, • Maintain Daily Wi-Fi Log update - Maintain all Guest and Back of House Wi-Fi equipment in Public Areas, Meeting Space and Guestrooms, • Review Anti-virus logs and resolve any enterprise issues, • Maintain inventory of all I/T equipment and peripherals, network architecture and software, • Maintain IDF and MDF’s as per ACCOR Standards, • Ensure a consistent PCI compliant environment and complete annual PCI compliance reporting, • Responsible for the I/T Budget, Forecast, Financial Reporting, and checkbook management, • Source vendors for best price, quality, alignment with corporate specifications and process payment, • Oversee and manage mobile devices, including company owned and BYOD integration, • Manage technical aspects of reader boards and In-room TV system. Coordinate service and replacements with functional champions and POMEC, • Oversee and manage the phone system, • Provide technical support for locally managed systems and corporate approved applications, including but not limited to interfaces, the PMS and collateral systems, F&B systems (POS, Mini Bars, devices, etc.) and financial management systems and devices, • Seek out and deploy technological initiatives to improve efficiency, increase profit and drive guest satisfaction, • Develop the annual technology capital plan with Accor and local input, based on needs assessment. Implement projects in accordance with the approved capital budget and outlined in a critical path, • Willing to work a flexible schedule in order to accomplish all major and critical responsibilities and tasks, including after-hours support, • Coordinate out of office coverage and maintain local functional champion support list, • Onsite Fairmont Dallas office space is primary workstation, • Other duties and responsibilities as assignedQualifications, • University/College Degree or a relevant field of work, or an equivalent combination of education and work-related experience, • 2+ years progressive work-related experience in multiple areas of Technology and previous hotel experience is an asset, • A+ Certification, • Microsoft Certified System Engineer preferred, • Cisco certification or equivalent experience preferred, • Entry level Network Technician certification, • Entry level Microsoft certification, • Understanding of hotel operations, • Good verbal & written communication skills, • Strong interpersonal skills, • Self-starter with a strong sense of commitment Additional Information What’s in it for you: • Paid time off, • Medical, Dental and Vision Insurance, 401K, • Complimentary Shift Meal, • Employee benefit card offering discounted rates in Accor worldwide, • Learning programs through our Academy designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, such as Planet 21, • Career development opportunities with national and international promotion opportunities

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Contract-to-Hire, Hybrid role based out of the Dallas/Waco/Tyler, TX area Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job DescriptionDescription: NexVest Realty Advisors, LLC (‘NexVest”) offers a complete range of commercial property management services to improve the performance and efficiency of investment properties. NexVest is committed to supporting the investment and ownership objectives of affiliates and investors. Job Details The Assistant Chief Engineer supports the property’s Chief Engineer in overseeing the daily operations, maintenance, and repair of building systems in a commercial property environment. This is a hands-on role responsible for ensuring the safe, efficient, and reliable operation of all building related systems. Responsibilities • Perform and supervise preventative and corrective maintenance on HVAC, electrical, plumbing, fire/life/safety, and other building systems., • Shares in responsibilities for tenant interaction and services, inventory, supply purchasing, tracking and control., • Respond promptly to tenant service requests and resolve issues related to lighting, plumbing, HVAC, and general building operations., • Conduct routine inspections and assessments of building systems and equipment as directed by management, or as outlined by preventive maintenance schedules., • Operate and maintain critical systems including chillers, UPS, generators, and building automation systems (BAS)., • Maintain accurate logs and reports on equipment performance and maintenance activities, both electronically and written., • Assist with vendor coordination, contractor oversight, and project support., • Ensure compliance with safety policies and procedures; identify and mitigate hazards., • Create, modify and update preventative maintenance schedules within electronic work order system., • Aid and advise in building maintenance protocols and provide feedback as to the effectiveness of preventative maintenance programs., • Participate in after-hours emergency response and on-call rotation., • Support other departments and perform additional duties as assigned., • Aid in guidance and training of entry and lower-level engineer team members., • High School Diploma or GED, • 5+ years of experience in building maintenance, including supervisory responsibilities, • Strong knowledge of HVAC, electrical, plumbing, mechanical, and fire/life/safety systems, • Proficiency with CMMS and BAS systems, • Valid driver’s license, • EPA Universal Certification, • HVAC Certification, • Experience with facilities over 600,000 sq. ft., • A/C Refrigeration Operator Certification, • Chiller Plant Maintenance and thermal storage plant operation procedures Skills & Abilities • Self starter with an ability to work independently & responsibly with minimal required supervision., • Must be collaborative;, • Amenable to leadership advice and guidance;, • Ability to prioritize multiple tasks and responsibilities., • Strong organizational and analytical skills., • Ability to provide efficient, timely, reliable and courteous service to customers and tenants., • Ability to effectively present information., • Ability to utilize building system software as well as the Microsoft Office Suite of products., • Operate personal computer and other office equipment., • The physical ability to stoop, stand , climb, and frequent lift a minimum of 50 lbs., as well as assist others in team lifting as necessary. Benefits & Compensation NexVest offers a competitive base salary based on experience and performance. We offer a generous benefits package that includes an industry leading health insurance plan with no employee premiums or deductibles and a 401(k) plan with employer match. Our talented professionals share a passion for excellence, commitment to teamwork, and pride based on the firm’s track record in the commercial real estate industry. NexVest is an Equal Opportunity Employer.

Job Description Controls Field Service Technician - Dallas, TX Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Primoris Energy Services is on the lookout for an experienced Planner/Scheduler to join our exciting new project in Dallas, TX. In this role, you'll be the backbone of our mid-to-large scale projects, developing and maintaining schedules in Primavera P6, coordinating with project teams, and preparing detailed work packages for safe and efficient execution. If you have 5+ years of scheduling experience, strong Excel skills, and a knack for managing schedules per project contracts and budgets, we want you! Enjoy competitive pay and full benefits. Join us and be part of something big! Job Duties: • Prepare and maintain project schedule using current project systems tool (Primavera P6)., • Interface, as needed with client representatives to communicate and receive schedule update information., • Assist with preparation of weekly and monthly progress reports., • Analyzes project specifications and workload capacity data and performs mathematical calculations to determine tools and human resource requirements., • Plans and schedules workflow for the project team according to previously established guidelines, sequences and lead times., • Confers with project managers and engineers to determine status of assigned projects., • Various other duties as requested by management, • Integrate subcontractor schedule into Master Schedule., • Provide timely and accurate updating of project schedules., • Resource loading and analysis of data into schedules as required – Primavera., • Establishes and maintains professional working relationships with project staff., • Development of Baseline Schedules., • Manages the development of the overall CPM schedule and assures coordination with the Project Superintendent and the procurement schedule with the Project Engineer., • Monitoring & maintaining the quality of schedule reflection files., • Assist in weekly / monthly project schedule updates with the project team and Subcontractors., • Assist the project team in fragmenting the project schedule when required., • Provides insight to the Project Manager concerning schedule updates as to critical path and near critical path activities, and other potential issues with the project schedule., • Assist Project Managers in creating short-term schedules, monitor such schedules to determine impact on master schedule, and help in formulating actions to correct scheduling problems., • Assist Project Managers in the development of delay claim impacts., • Assist Project Managers in the development of recovery schedules. Qualifications/Skills: • Five (5) to ten (10) years of project scheduling experience., • Proficient in Primavera P6 scheduling., • Resource loading, • Mechanical construction experience, • Strong MS Excel skills, • Well-developed written and verbal communication skills., • Perform functions efficiently and accurately with little direct supervision., • Experience in creating, managing and analyzing construction project schedules., • Must be detail-oriented and have the ability to work well within a deadline driven environment., • Perform functions efficiently and accurately., • Professional attitude and always conduct oneself in a positive manner., • Must respect and maintain confidentiality of sensitive information., • Must be able to perform in a fast paced, changing environment. Benefits: • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Paid Time Off, Holiday Pay, and Community Service, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . Primoris Energy Services is a major direct-hire contractor in the U.S. delivering self-performed turnkey industrial construction and EPC services. We offer these services to our clients within the refining, gas processing, chemical/petrochemical, hydrogen, power generation, mining, pulp and paper industries from the first groundbreaking activity all the way through commissioning and start-up of the project. Primoris forms a partnership with our customers and major stakeholders from early-stage engineering through construction completion and commercial operation, safely, on-time, and within budget. AGENCY STATEMENT We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-GR1

Job Description Process and Control Automation Engineer will design, develop, and implement automation systems to optimize industrial processes. Configure hardware and software, ensure system efficiency, and troubleshoot issues. Collaborate with teams to integrate new technologies and improve processes. Strong problem-solving skills and automation experience required. Responsibilities: • Develop, design, maintain, and commission automation and control systems for industrial equipment., • Design and program logic for PLCs, drive systems, and combustion control systems., • Develop SCADA and operator interface applications., • Create and maintain databases and custom computer programs for PLC and SCADA system interfaces., • Troubleshoot mechanical and electrical components, diagnose and resolve issues using standard procedures., • Produce project manuals and electrical schematics using CAD software., • Develop scope of work, cost estimates, and budgets for electrical systems., • Gain in-depth knowledge of all aspects of SCR systems, including fluid systems, operations, metallurgy, maintenance, material handling, and furnace systems., • Assist with on-site commissioning of SCR system components., • Transfer technical knowledge to SCR customers through training, discussions, presentations, and startup assistance. Qualifications: • Bachelor’s Degree in Electrical Engineering or a related engineering field., • At least 8 years of experience in the design, commissioning, troubleshooting, and/or operations of PLC process and control systems, particularly for combustion management systems., • At least 5 years’ experience in the chemical or manufacturing industry, with expertise in industrial processing equipment, instrumentation and control, AC and DC drives, PLCs, combustion systems, design, maintenance, and/or operation., • Practical experience working on the floor with technicians; this is a hands-on role involving PLC process and controls, not database processes and controls., • Experience with Allen Bradley or Siemens PLCs and drive systems., • Experience with SCADA systems and HMI applications., • Willingness to travel internationally approximately 40% of the time., • Office or home location based in Carrollton, GA., • Proficiency in AutoCAD for CAD tasks., • Strong computer programming, networking, database, and reporting skills., • Excellent communication, organization, presentation, interpersonal, and project management skills. Benefits: • Dental Insurance, • Medical Insurance, • Vision Insurance, • Life Insurance, • Retirement, • Paid time off and other Travel: Up to 40% of the time Salary: Salary to be discussed with a Recruiter Bonus: Negotiable signing bonus Sponsorship: No visa sponsorships are supported Powered by JazzHR g5zxF0kD5D