Trabajos manufacturing operator en Orange, New JerseyCrear alertas

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description 1st Shift Position Description: The Sanitation Operator will be responsible for keeping areas in the production and or administrative areas clean and in orderly condition as assigned by leadership. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Essential Duties & Responsibilities: • Responsible for supporting the plant's food safety culture and complying with all food safety, quality, and regulatory requirements applicable to the position., • Clean/ sanitize assigned areas by following SSOPs, • Protect, cover, or remove boxes, material, or other industrial equipment that may be affected by the sanitation process., • Collect and properly dispose of major dirt and /or product left over on production department floors or pans., • Clean / prewash heavy oil, grease, and visible dirt from machines, overhead pipes, and conveyors., • Wash walls and ceiling., • Transport trash and waste to proper disposal area., • Start pump to force cleaning solution through production machinery, piping or vats., • Clean, sanitize, disassemble, and assemble equipment according to company procedures., • Clean processing equipment, overhead pipes, and conveyors., • Scrub processing tanks, vats, and kettles., • Clean floors with mop and/or use electrical scrubber., • Operate industrial truck to transport materials within plant., • Must be trained to use cleaning chemicals according to OSHA guidelines., • Complete all required documentation for procedures performed., • Performs other cleaning duties of a similar nature as assigned by Supervisor and/or Manager.Qualifications Education: High School Diploma or equivalent Related Experience: Previous relevant experience, preferably in a manufacturing environment or commercial cleaning. Competencies: • High School diploma or General Education Degree (GED), • Experience reading and understanding MSDS (Materials Safety Data Sheets), • 6 months experience in a Sanitation role., • Ability to read and comprehend instructions, short memos., • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • No direct reports but must be able to direct other plant personnel who are assisting in the sanitation process., • Bilingual is a plus Additional Information Physical: Must have the ability to lift 50 pounds, climb stairs, lift, bend, kneel, stand for long periods of time, work in confined spaces, and work with heights Full Time Employee Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: https://www.stratasfoods.com/compliance Stratas Foods California Privacy Rights Act Policy: https://www.stratasfoods.com/compliance

Description Build your future with a small, family-owned machine shop in Kenilworth, NJ where precision manufacturing meets hands-on problem-solving on real production and prototype work.In this CNC Machine Programmer/Operator opportunity, you’ll program, set up, and optimize milling and turning o

Job Description Company Info Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste, lowering disposal costs and fueling local supply chains by ensuring materials are recovered, recycled, and reused. About the Role: The Maintenance Mechanic Supervisor is responsible for leading maintenance systems, overseeing the continuous improvement of the process and executing long-term strategic plans. Benefits: • Health, Dental, Vision insurance, • FSA, • Vacation Time, • 401k matching, • Employee Assistance Program, • Paid Parental Leave, • Tuition Reimbursement Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Observes mechanical equipment in operation to locate causes of trouble, • Schedule, trains, supervise and motivate employees for maintenance tasks, • Coordinate work performed by outside vendors, • Ensure efficient repair schedules and review repair cost estimates, • Prioritize the maintenance and repairs of company equipment and parts, • Control and monitor inventory, • Dismantles equipment to remove and replace defective parts, • Adjusts functional parts of equipment and control instruments, • Ensure that all equipment complies with OEMs and regulatory agencies operating standards, • Ensures proper equipment lubrication in compliance with OEMs lubrication schedule, • Follows preventive maintenance works order procedures, • Develop familiarity with and ensure compliance with safety, health, environment and community company policies and procedures as they pertain to facility operations and equipment usage and operation, • Perform other duties as assigned Minimum Job Qualifications: • High School diploma or general education degree (GED), • Technical School Preferred, • Previous supervisory skills in a diverse, fast-paced manufacturing/production environment, • Excellent mechanical ability and strong analytical skills, • Demonstrated ability to follow procedures and work from a set of written instructions, • Basic computer skills, • Must speak and understand English; Spanish speaking is a plus, • One year minimum mechanical repair related experience in a heavy industrial setting or equivalent combination of education and experience Working Conditions and Physical Requirements: Normal work environment is outdoors, with exposure to all weather conditions, dirt, high levels of noise, smells/odors and at times exposure to dangerous and/or toxic substances requiring necessary precautions, including PPE. The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. • The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl., • The employee is occasionally required to sit and talk or hear., • Must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Job DescriptionDescription: JOB OVERVIEW Overall responsibility is to provide mechanical, electrical and controls support to packaging as needed, including troubleshooting, preventative maintenance (PM), changeover, modifications, and repair of line equipment to ensure operating efficiently; within FDA CFR 111, 117, 210 & 211 regulated manufacturing facility. RESPONSIBILITIES: Essential Functions: · Perform preventative maintenance on all machinery in the packaging area. · Set up production lines as instructed by daily management tracker. · Effectively and accurately troubleshoot and make routine adjustments and repairs to equipment and machinery to maintain production and maintenance schedules. · Disassemble machinery and equipment to determine worn or broken parts, repair or replace necessary parts by using new parts from stock or by fabricating manufacturing parts to machinery or equipment. · Continually check equipment and machines to proper function for quality, safety, and quantity. · Assembling, installing, and maintaining mechanical systems, machinery, and equipment. · Maintaining a schedule for inspecting, servicing, and testing machinery. · Cleaning, repairing, and installing equipment and parts as needed. · Operating a variety of hand and power tools. · Maintaining a clean and organized work area. · Manage the Operators · Train the Operators · Engage in effective communication with the official technician of the equipment they need assisting for troubleshooting or diagnosis. · Capable of performing electrical troubleshooting on the equipment. · Read and interpret documents such as SOP / GMP, Safety Rules, Operating and Maintenance Instructions. · Diagnose and repair electrical faults (PLC, fuses, relays, etc.) · Uncrating new equipment. · Perform S.A.T & F.A.T in new equipment. · Train Operator and mechanics in new upcoming equipment. Nonessential Functions/Demands: · Cover the mechanic manager function when applicable. · Uncrate machinery · Assist in maintaining a safe work environment in the production areas by performing routine audits and reporting results. · General understanding of customer specifications. · Hands on in running equipment. · Attention to detail. · Organized, motivated team player. Requirements: QUALIFICATION REQUIREMENTS: · High school diploma/GED or Technical Degree. · 5+ years’ experience as maintenance mechanic. · Knowledge and adherence to GMP’s. · Knowledge of packaging machinery, specifically bottle, pouch, cartoning, thermoform and cold form blisters. · Ability to ready and interpret equipment manuals and blueprints. · Excellent interpersonal, communication and organizational/time management skills. · Ability to prioritize work assignments in a fast-paced work environment. REPORTING RELATIONSHIP: · Manager: Mechanic Manager · Managerial Responsibility: N/A PHYSICAL/MENTAL DEMANDS: · Must be able to remain standing for up to 90% of the time. · Must be able to lift-up 10 pounds frequently and 50 pounds on occasion. · Continually required to talk or hear. · Continually required to utilize hand and finger dexterity. · While performing the duties of this job, the noise level in the work environment is usually moderate. · The person in this position will need to occasionally kneel, climb, crawl, climb and/or reach to complete job duties. · The person in this position is required to communicate to all other departments and must be able to exchange accurate information in these circumstances.

Princeton Critical Minerals (PCM) and its affiliate PureLi SpA develop technologies for lithium and critical-minerals recovery, with operations in the United States and Latin America. PCM's solutions, including Lilypad, SmartPond and E-LiTE, serve lithium brine, mining, oil & gas produced water and industrial water customers. Position overview The Business Operations & Development Manager is a hybrid commercial and operations role reporting to the Chief Operating Officer. Business development (about 45%) covers finding and qualifying new clients and partners, running the pipeline from first meeting to signed proposal, and winning non-dilutive funding. Business operations (about 55%) covers the contract and NDA lifecycle, CRM and systems, program management, logistics support, and executive reporting. The Manager takes a deal from first conversation through NDA, proposal, contract and delivery, and serves as the commercial right hand to the COO. The role works in English (Spanish a plus) with clients, partners, vendors and internal teams across the US and Latin America. Key responsibilities: Business development (~45%) Pipeline and client development (~20%) • Identifies, researches and qualifies prospects in lithium brine, mining, oil & gas produced water and industrial water., • Leads outreach and discovery meetings, asking the commercial questions that shape a deal: scale, cost per unit, coverage and timeline., • Owns the pipeline from lead to signed purchase order, setting next steps, following up and moving deals forward., • Builds and maintains relationships with client, partner and government-lab contacts in the US and Latin America. Proposals, pricing and deal support (~15%) • Leads proposals, statements of work and quotes for Lilypad, SmartPond and E-LiTE, working with technical leads on scope and pricing., • Manages the path from first meeting to contract: NDA, sample exchange and pilot terms, proposal, then agreement., • Prepares pitch decks, one-pagers and client presentations. Grants, partnerships and market presence (~10%) • Identifies funding opportunities (DOE, NSF SBIR/STTR, state programs) and leads grant applications., • Structures partnerships with national labs, universities and industry (NTAPs, CRADAs, collaboration agreements)., • Writes conference abstracts, represents PCM at industry events and maintains the event calendar., • Coordinates event marketing and LinkedIn content with branding, and identifies and applies for industry awards and recognition opportunities. Business operations (~55%) Contracts, NDAs and legal operations (~20%) • Owns the NDA/CDA lifecycle: sends templates, redlines, negotiates, routes for signature and files executed copies., • Maintains the NDA and agreement register with expiry and renewal alerts, and renews agreements before they lapse., • Serves as the day-to-day contact for outside counsel and keeps client, vendor and Spanish-language templates current., • Brings leadership clear decision requests on higher-risk clauses such as liability, IP ownership, term and arbitration. Systems, CRM and program management (~15%) • Administers Salesforce and Smartsheet: architecture, data standards, reports and user training., • Manages active programs (pilots, grant-funded projects, client deliveries) with milestones, owners and risk tracking., • Manages awarded grants, including deliverables, budgets and reporting deadlines. Manufacturing, logistics and vendors (~10%) • Oversees and supports the manufacturing and shipping portfolio alongside the Director of Manufacturing., • Coordinates international shipments with freight forwarders, customs agents and carriers (US, China, Latin America)., • Maintains the logistics tracker, vendor contact database and vendor contract register, and keeps SOPs current. Executive support (~10%) • Assembles board reports and pre-reads, and maintains company goals and KPIs., • Runs the weekly cross-functional priorities tracker for the COO and supports management meetings., • Covers handoffs when team members are on leave. Business development support Beyond owning deals directly, the Manager is the support engine behind the company's commercial work. Leadership and engineers lead the technical conversation; the Manager makes sure every meeting is prepared, every lead is logged and every follow-up happens on time. • Account research and meeting prep: One-page briefs before client meetings: company background, site and resource profile, decision makers, prior touchpoints, open agreements and suggested commercial questions., • Lead capture and qualification: Logs new contacts from events, inbound inquiries and referrals in Salesforce promptly, scores leads by fit (resource type, scale, budget, timeline) and flags top prospects to leadership., • Follow-up: Sends meeting recaps with agreed next steps within one business day, tracks owners and due dates, and secures internal inputs (pricing, technical data) so clients are not kept waiting., • Proposal library: Maintains standard scope language, pricing tables, case studies and team bios so first drafts are ready in days, not weeks., • Pricing and deal structure: Builds pricing models for pilots and service contracts (cost per unit, volume tiers, pilot-to-commercial terms) with technical and finance leads., • Sales collateral: Keeps pitch decks, one-pagers, capability statements and videos current in English and Spanish., • Pipeline reporting: Delivers a weekly pipeline snapshot (stage, value, next step, risk) to leadership and a quarterly summary for the board., • Events and market intelligence: Prepares event schedules and booth plans, and captures competitor, pricing and market signals from events and client calls. Qualifications Required • Bachelor's degree in business, engineering, chemistry or a related field., • 6+ years of combined experience in business development and business operations, including at least 3 years in B2B business development or technical sales at a technology, energy, mining or water company., • Proven track record of building pipeline and closing deals: prospecting, discovery, proposals, pricing and negotiation with enterprise clients., • Hands-on experience negotiating NDAs and commercial agreements and working with legal counsel., • Program management experience running several cross-functional projects at once., • Admin-level Salesforce skills; advanced Smartsheet and Excel., • Grant writing and grants management experience., • Full professional fluency in English, written and spoken., • Strong writing skills, with the ability to turn technical input into proposals, abstracts and board-ready material. Preferred • MBA or a technical master's degree., • Established network in lithium, critical minerals, oil & gas or water treatment, especially in Chile, Argentina or the US., • Experience selling pilots or technology-as-a-service to industrial clients., • Familiarity with Latin American business practice and import processes., • Experience with national lab agreements (NTAP, CRADA) or technology transfer., • PMP or an equivalent certification. Technical and systems experience • Business development: Account research, discovery, value-based pricing for pilots and service contracts, negotiation, long-cycle B2B pipeline management. Level: 3+ years, • Program management: Multiple cross-functional programs; milestones, owners and dependencies; risk tracking; status reporting to leadership and board. Level: 5+ years, • Salesforce: Objects, stages and fields; data loading and cleanup; pipeline reports and dashboards; user training. Level: Admin-level, 2+ years, • Smartsheet: Registers with expiry and renewal alerts; automations, reminders and shared views. Level: Advanced, • Contract review: NDAs, CDAs, MSAs and SOWs; liability, indemnity, IP, term, governing law and arbitration; escalation judgment. Level: 3+ years, • Grants: Applications (DOE, NSF SBIR/STTR, state programs) and post-award management of deliverables, budgets and reporting. Level: Submitted or awarded proposals, • Microsoft 365 / SharePoint: Document control, permissions, Teams and Loop. Level: Advanced, • Excel: Trackers, KPI sheets, databases, basic financial models. Level: Advanced, • Logistics and procurement: Incoterms, freight forwarders, customs documents, RFQs, vendor onboarding. Level: Working knowledge The ideal candidate The ideal candidate is a commercially minded operator who has sold technical B2B solutions and has also run the operations behind them, such as contracts, CRM, grants and programs. They thrive in a small, fast-moving company where they both open doors and handle the details that close the deal. • Commercial drive: generates pipeline independently, asks for the next step in every meeting and is comfortable discussing price and terms with enterprise buyers., • Technical fluency: understands enough chemistry and process engineering to present PCM's technologies credibly, and knows when to bring in engineers., • Contract judgment: spots risk in key clauses, proposes workable fallback positions and knows when to escalate to counsel., • Organization and follow-through: keeps many threads moving with clear owners and dates., • Relationship building: earns trust with clients, national labs, vendors and internal teams across cultures., • Discretion: handles confidential commercial, legal and board information with care., • Flexibility: comfortable with ambiguity and shifting priorities, and willing to travel to client sites, events and Latin American operations as needed. Typical backgrounds include business development manager at a deep-tech, cleantech or mining-services company; commercial or contracts manager in energy, oil & gas or water treatment; or business operations lead at a venture-backed industrial startup. Compensation & Benefits • Competitive salary based on experience, • Health, dental, and vision insurance, • Paid time off and holidays, • Opportunities for professional growth and advancement Equal opportunity PCM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or any other characteristic protected by law.

About the Role International Delights is building a world-class, multi-asset maintenance program across our production, facilities, and fleet operations. We are looking for a Maintenance Manager to own the site’s maintenance performance end-to-end — leading Team Leaders and technicians, and driving the transition from a reactive to a proactive, planned and predictive maintenance culture. This role is the accountable owner of the site’s core maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance, and cost — and reports directly to the Director of Maintenance and Engineering as a key partner in executing the 24-month reliability roadmap. It is a visible, high-impact position with a clear development path toward Director-level responsibility. What You’ll Do Performance & Reliability • Own the site’s maintenance KPI scorecard — safety incidents, unplanned downtime, MTTR, MTBF, PM compliance, backlog, and maintenance cost — setting targets, driving corrective action when metrics miss, and reporting performance to plant and maintenance leadership on a regular cadence, • Own day-to-day maintenance of all bakery production lines — mixing, makeup, proofing, ovens, cooling, lamination, and packaging — so scheduled production is delivered at target throughput, yield, and food-safety standards, • Analyze downtime, failure, and CMMS data to identify systemic reliability issues and sponsor root cause and corrective action initiatives, • Partner with the Maintenance Planner and reliability resources to mature the site across the four-tier model: reactive, preventive, predictive, and RCM Leadership & Development • Lead, develop, and hold accountable 4 Team Leaders and the technician workforce across shifts A–D, setting priorities and resolving cross-shift conflicts, • Develop the technician bench with the Maintenance Trainer — own the skills matrix, training plan, and succession planning across the maintenance organization, • Translate the site’s 24-month maintenance roadmap into department-level goals, staffing plans, and daily execution Safety & Food Safety • Own safety performance within maintenance — LOTO, machine guarding, confined space, arc flash, and hot work — and lead incident investigations through to closure, • Ensure all work meets GMP, HACCP, allergen-changeover, and SQF requirements; own food-safe repair practices including food-grade lubricants, no-loose-hardware discipline, and post-repair sanitation sign-off, • Own the performance, upkeep, and regulatory compliance of refrigeration systems and facility/building infrastructure, including ammonia and refrigerant regulations [and PSM/RMP program elements] and applicable building codes Planning & Execution • Review and commit to the weekly maintenance schedule developed by the Maintenance Planner, who reports to the Director of Maintenance and Engineering — validate priorities, assign crew capacity, and protect PM windows around the bake schedule, • Partner with Production on changeovers, sanitation windows, and holiday bake ramps, • Drive CMMS adoption and data integrity across the department to support KPI reporting and planning decisions Cost & Asset Stewardship • Manage the maintenance department budget — labor, contractor spend, and parts/MRO inventory — and provide input on capital projects, • Own contractor and vendor relationships supporting maintenance execution, including scope, performance, and cost management, • Own maintenance, inspection, and compliance for site fleet assets — powered industrial trucks, yard equipment, and [delivery vehicles] — including operator inspection programs, OSHA PIT and applicable DOT requirements, service contracts, and replace-versus-repair decisions. What You Bring Required • 10+ years of industrial maintenance experience, including 5+ years in a maintenance management role, • Proven track record owning and improving maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance — in a manufacturing environment, • Strong working knowledge of mechanical, electrical, pneumatic, hydraulic, and PLC/controls systems, • Deep experience with CMMS platforms, including KPI dashboards, PM program build-out, and data-driven decision-making, • Demonstrated ability to build and lead multi-level teams across shifts, • Strong financial acumen — budget ownership, labor planning, and cost control, • Excellent communication and influencing skills, comfortable presenting KPI performance to plant leadership Preferred • Food or beverage manufacturing experience, • Ammonia refrigeration experience, including participation in or ownership of a PSM program, • SQF, BRC, or equivalent GFSI audit experience, • Fleet or powered industrial truck maintenance experience, including OSHA PIT and DOT compliance programs, • Reliability credentials or framework experience (CMRP, SMRP, Uptime Elements), • Bachelor’s degree in Engineering or a related technical field; equivalent experience will be considered Schedule & Work Environment • Primary schedule is [day shift, Monday–Friday], supporting a continuous operation running shifts A–D, • On-call rotation and occasional weekend, holiday, or off-shift coverage required during peak bake ramps, planned shutdowns, and major breakdowns, • Plant floor environment with temperature variation near ovens and coolers, elevated noise, and lifting up to [XX] lbs; PPE and GMP requirements apply at all times What Success Looks Like • Measurable, sustained improvement in downtime, MTTR, and MTBF against 24-month targets, • Strong safety performance and full compliance across the maintenance department, • High PM compliance and a shrinking, well-managed maintenance backlog, • A capable, accountable leadership bench across Team Leaders and senior technicians, • A demonstrated shift from reactive maintenance toward a planned, predictive, and cost-disciplined program International Delights is an equal opportunity employer.

We're seeking a seasoned HR Manager to lead and the Human Resources function across multiple sites. This is a hands-on role for someone equally comfortable serving as a strategic partner to leadership and as the day-to-day operator who handles recruiting, employee relations, compliance, benefits, payroll, and culture initiatives. Responsibilities Recruiting & Onboarding • Own full-cycle recruiting, including job postings, sourcing, screening, interviewing, and offer negotiation, • Design and continually improve the new-hire onboarding experience across all locations, • Work with hiring managers to define role requirements and hiring plans Employee Relations & Culture • Act as the primary resource for employee questions, concerns, and conflict resolution at every site, • Investigate and resolve workplace issues fairly and confidentially, • Drive company culture, engagement initiatives, and internal communications, keeping a consistent employee experience across locations Compensation & Benefits • Administer benefits programs, including health insurance, retirement plans, and PTO, • Support annual compensation reviews and market benchmarking, • Manage open enrollment and vendor relationships (brokers, carriers, payroll providers) Compliance & Policy • Ensure compliance with federal, state, and local employment laws (FLSA, FMLA, ADA, EEO, etc.), including any state or local variations across sites, • Maintain and update the employee handbook and HR policies, • Own recordkeeping, I-9 compliance, and audit readiness for all locations Performance Management • Design and run performance review cycles and goal-setting processes, • Coach managers on feedback, documentation, and difficult conversations, • Support promotion, PIP, and termination processes HR Operations & Payroll • Process payroll for all sites, ensuring accuracy and timeliness, in partnership with Finance or an outside payroll provider, • Maintain HRIS data integrity and produce reports for leadership, • Manage leave-of-absence administration and workers' compensation claims Strategic HR • Advise leadership on organizational design, headcount planning, and workforce strategy, • Identify opportunities to improve HR processes, tools, and the employee experience, • Build HR from the ground up or scale existing practices as the company grows Qualifications • Bachelor's degree, • 10+ years of progressive HR experience, • Strong working knowledge of employment law and HR compliance, • Experience supporting multiple sites or locations, • Hands-on experience with employee relations and payroll processing, • Manufacturing or distribution experience preferred, • Sound judgment and discretion in handling confidential information, • Strong communication and interpersonal skills at all levels of the organization, • SHRM-CP, SHRM-SCP, PHR, or SPHR certification

Job Description Pay: Starting from $18.00 per hour Job description: A self adhesive paper manufacturer needs a slitting operator helper to support the operator who slits the master rolls to the customer requested sizes. Strong work ethics and being a team player are important. Primary Responsibilities: • Prepare the machine for slitting and getting the material ready to be packed., • Put the master roll to the machine, • Release the rolls from machine and palletize it., • Responsible to follow safety procedures, • Must exhibit knowledge and competency of quality and manufacturing process requirements., • Forklift experience desired., • Work authorization is mandatory.Job Types: Temporary, Contract, Part-time, Full-time Benefits: • 401(k)Schedule:, • 8 hour shift, • Day shift, • Monday to FridaySupplemental Pay:, • Bonus payEducation:, • High school or equivalent (Preferred)Experience:, • Warehouse: 1 year (Preferred)Work Location: In person

Job Description Straight Truck Owner Operator – Evening & Overnight Retail Deliveries SalSon Logistics is seeking reliable and professional Straight Truck Owner Operators for consistent evening and overnight retail delivery routes. If you're looking for steady freight, multiple delivery opportunities per night, and strong earning potential, we want to hear from you. 26 ft. Straight Truck with Lift Gate required. Compensation Owner Operators typically earn between $2000.00 and $5,000.00 per week, depending on delivery volume, route assignments, and performance. Specific earning details will be discussed during the interview process. About the Work Our retail delivery network supports some of the nation’s most recognized brands, providing steady nightly freight and long term business opportunities. Delivery Areas • New Jersey, • Pennsylvania, • New York City (Five Boroughs) Start Time • 6:00 PM nightly Load & Route Details • Each load includes approximately 2–6 stops, • Most Owner Operators complete 2–4 deliveries per night, • Route specifics and territory assignments reviewed during the interview, • Consistent retail freight available every night Responsibilities • Safely operate your straight truck and complete scheduled deliveries, • Ensure timely and accurate delivery of retail merchandise, • Maintain professional communication with dispatch and customers, • Complete required paperwork and documentation Insurance Requirements • $1,000,000 Auto Liability Insurance, • $100,000 Cargo Insurance Background Screening All drivers must successfully complete a background check prior to operating under this account. This includes Owner Operators and any ad \nCompany Description Salson Logistics is a leading asset-based third-party logistics (3PL) provider delivering integrated supply chain solutions throughout the United States. Headquartered in Newark, New Jersey, Salson offers a comprehensive range of services, including transportation, warehousing, distribution, drayage, transloading, dedicated fleet operations, and final-mile delivery. With decades of logistics expertise, Salson helps customers move products efficiently from port to shelf through customized, scalable supply chain solutions. The company operates an extensive network of transportation assets and warehouse facilities, serving industries such as retail, food & beverage, consumer goods, and industrial manufacturing. At Salson, employees are part of a family-oriented culture built on teamwork, integrity, respect, and operational excellence. We are committed to providing exceptional customer service, supporting employee growth, and creating opportunities for long-term career success in the transportation and logistics industry. Salson Logistics is a leading asset-based third-party logistics (3PL) provider delivering integrated supply chain solutions throughout the United States. Headquartered in Newark, New Jersey, Salson offers a comprehensive range of services, including transportation, warehousing, distribution, drayage, transloading, dedicated fleet operations, and final-mile delivery.\r\n\r\nWith decades of logistics expertise, Salson helps customers move products efficiently from port to shelf through customized, scalable supply chain solutions. The company operates an extensive network of transportation assets and warehouse facilities, serving industries such as retail, food & beverage, consumer goods, and industrial manufacturing.\r\n\r\nAt Salson, employees are part of a family-oriented culture built on teamwork, integrity, respect, and operational excellence. We are committed to providing exceptional customer service, supporting employee growth, and creating opportunities for long-term career success in the transportation and logistics industry.

Job DescriptionPackaging Operator Pay: $20.00 - $24.00/hour Shift: 6:00am - 2:30pm Job Overview We are seeking a Packaging Operator with pharmaceutical packaging experience to join a growing manufacturing team. In this hands-on role, you will operate packaging and filling equipment, complete production documentation, and help ensure products meet quality standards. This is an excellent opportunity for someone who thrives in a fast-paced environment and takes pride in accuracy, efficiency, and teamwork. Responsibilities • Operate vial filling, packaging, and production equipment, • Set up, clean, and prepare equipment for manufacturing and packaging runs, • Verify equipment is properly calibrated and ready for operation, • Complete batch records, logbooks, and production documentation accurately, • Monitor equipment performance and report any issues to production leadership, • Track and document downtime and production-related information, • Palletize finished products and move materials as needed, • Communicate production status and quality concerns during shift handoffsQualifications, • High school diploma or equivalent, • Minimum 3 years of pharmaceutical packaging experience, • Experience operating packaging, filling, or manufacturing equipment, • Ability to follow SOPs and maintain accurate production documentation, • Basic math, reading, writing, and communication skills, • Ability to stand for extended periods throughout the shift, • Ability to lift and move up to 50 pounds, • Comfortable working in a manufacturing gowning environmentJob Type & Location This is a Contract to Hire position based out of Caldwell, NJ. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Caldwell,NJ. Application Deadline This position is anticipated to close on Oct 19, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionA self adhesive paper manufacturer needs a slitting operator helper to support the operator who slits the master rolls to the customer requested sizes. Strong work ethics and being a team player are important. Primary Responsibilities: • Prepare the machine for slitting and getting the material ready to be packed., • Put the master roll to the machine, • Release the rolls from machine and palletize it., • Responsible to follow safety procedures, • Must exhibit knowledge and competency of quality and manufacturing process requirements.

Job DescriptionExperienced Shipping Department Forklift Operator / Order PickerPosition Summary We are seeking an experienced, dependable, and safety-focused Shipping Department Forklift Operator / Order Picker to join our growing door manufacturing team. The ideal candidate has experience operating forklifts in a fast-paced warehouse environment, accurately picking and preparing customer orders, and safely handling large, oversized materials. This role requires attention to detail, strong organizational skills, and the ability to work efficiently while maintaining quality and safety standards. Responsibilities • Accurately pick customer orders based on shipping paperwork., • Analyze and interpret order documents, ensuring correct door sizes, styles, construction, and quantities are selected., • Safely operate forklifts to transport doors, pallets, and oversized materials throughout the warehouse., • Build and palletize customer orders to ensure safe transportation., • Strap, wrap, and secure finished orders for shipment., • Load and unload trucks efficiently while verifying shipment accuracy., • Inspect products for damage or defects before shipping., • Organize and stage completed orders for scheduled pickups and deliveries., • Maintain a clean, organized, and safe shipping area., • Perform daily forklift inspections and report equipment issues promptly., • Work closely with production, warehouse, and shipping personnel to meet daily shipping schedules., • Follow all company safety procedures and OSHA guidelines when handling materials and operating equipment. Qualifications, • Minimum 2 years of forklift experience in a warehouse, manufacturing, or shipping environment., • Previous experience with order picking and shipping operations is required., • Experience handling large, heavy, or oversized materials is strongly preferred., • Ability to accurately read and understand shipping paperwork, order specifications, and product dimensions., • Comfortable moving large pallets, bundles, and door products safely and efficiently., • Strong attention to detail with a commitment to order accuracy., • Ability to lift heavy doors as part of a team effort and work on your feet throughout the shift., • Reliable attendance and strong work ethic., • Excellent communication and teamwork skills., • Experience in the door, window, lumber, or building materials industry is a plus. What We’re Looking For We’re looking for someone who takes pride in their work, values safety, and understands that shipping accuracy is just as important as speed. The right candidate is dependable, organized, and confident operating forklifts while handling large, high-value products with care. If you’re an experienced forklift operator who enjoys working in a fast-paced manufacturing environment and wants to be part of a team that values quality, safety, and reliability, we’d love to hear from you.

Job Description Job Title: Slitting Operator Location: West Caldwell, NJ Type: Contract Compensation: $25.00 - $27.00 per hour Work Model: Onsite Hours: 6:15 a.m. - 2:30 p.m. (with potential for OT) Responsibilities • Operate slitting and rewinding equipment to process raw materials, medical tapes, and coated laminates and films. • Complete in-process checks and batch record documentation accurately according to manufacturing orders. • Set up equipment correctly, including wind direction and tension settings, in accordance with SOPs. • Use slitting tools and machine components safely and effectively, including scissors, crush, and razor knives. • Label, package, and prepare finished materials for transfer or shipment as required. • Clean equipment and maintain the work area in compliance with safety, environmental, and housekeeping standards. • Complete all aspects of the slitting operation, including in-process control activities and batch record documentation accordance with manufacturing orders. • Follow manufacturing procedures and support safe, efficient production operations as needed. Requirements • High school diploma or equivalent. • 4-5 years of production or manufacturing experience. • Ability to read, write, and communicate clearly in a manufacturing environment. • Basic math skills and ability to complete production documentation accurately. • Comfort using basic tools, equipment, and manufacturing machinery. • Able to wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, tyvek suit, and other safety equipment as needed. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Job Title: Production Operator Location: Lyndhurst, NJ Type: Contract To Hire Compensation: $20.00-$20.50 (based on shift) Work Model: Onsite Hours: D-SHIFT Thursday-Sunday/Friday-Sunday; from 6pm-6:30am, will train on A-Shift Monday-Wednesday/Monday-Thursday; from 6am-6:30pm 2nd SHIFT 2pm-10:30pm will train on 1st shift Mon-Friday; from 6am-2:30pm 3rd SHIFT Monday-Friday; from 10pm-6:30am; will train on 1st shift Mon-Friday; from 6am-2:30pm Responsibilities • Operate manufacturing and/or packaging line(s) to ensure maximum production quantity and quality, supporting company policies, goals, and objectives for an 8 or 12-hour shift., • Tend manual or semiautomatic systems processing chemical substances into products such as sealants, adhesives, mortars, primers, and intermediates., • Load solid materials into heating/cooling vessels or blending tanks, and set controls or operate valves to feed materials through equipment., • Observe chemical reactions, monitor gauges, signals, and recorders, and receive notifications to adjust operating parameters as needed., • Draw samples for quality control analysis and perform chemical tests/QC checks to ensure product conformance with specifications., • Utilize forklift to package, palletize, shrink-wrap, and stage products into designated areas or onto trucks for transportation., • Perform related duties and assist with special projects as assigned, ensuring conformance with safety rules to maintain plant safety. Requirements, • High School graduate; trade school certification in electronics or related field a plus, • Ability to read, write, and comprehend documents in English, • Able to lift up to 74 lbs. repeatedly throughout the work shift, • Ability to understand, analyze, and resolve technical problems in the work area, • Ability to work the shift schedule where opening exists System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Fabuwood is seeking a dependable, detail-oriented, and hands-on UV Paint Line Machine Operator to oversee the operation, maintenance, and performance of our UV coating production line. This role is responsible for ensuring the efficient and continuous operation of UV finishing equipment while maintaining high standards of quality, safety, and productivity. The ideal candidate will have experience in industrial paint or finishing operations and possess strong mechanical troubleshooting skills. Schedule: Mon-Thurs 7:30am-4:30pm & Fri 7:30am-12:00pm Key Responsibilities Production Operations • Operate, monitor, and maintain UV paint line equipment to ensure continuous and efficient production., • Set up and adjust machine settings to meet production specifications and quality requirements., • Monitor line performance, production output, and product quality throughout the shift., • Ensure materials, coatings, and supplies are properly loaded and available to support uninterrupted production., • Verify finished products meet company quality standards and specifications. Equipment Maintenance & Troubleshooting • Perform routine inspections, preventive maintenance, and cleaning of UV paint line equipment., • Identify, troubleshoot, and resolve minor mechanical, electrical, or operational issues to minimize downtime., • Communicate equipment malfunctions and major repair needs to Maintenance and Production leadership., • Maintain accurate maintenance and production records as required. Quality & Continuous Improvement • Conduct regular quality checks and inspections throughout the production process., • Identify defects, inconsistencies, or process deviations and take corrective action when appropriate., • Assist in process improvement initiatives aimed at increasing efficiency, reducing waste, and improving product quality., • Support continuous improvement efforts and recommend operational enhancements. Safety & Housekeeping • Follow all company safety policies, procedures, and PPE requirements., • Maintain a clean, organized, and safe work area around the UV paint line and surrounding equipment., • Report safety concerns, hazards, and incidents promptly., • Participate in safety meetings, training programs, and operational audits as required. Qualifications Required • Previous experience working in a paint production, coating, finishing, manufacturing, or industrial production environment., • Experience operating industrial machinery and production equipment., • Basic mechanical aptitude with the ability to troubleshoot and perform minor equipment repairs., • Strong attention to detail and commitment to quality., • Ability to work independently while maintaining productivity standards., • Ability to read and follow work instructions, production schedules, and safety procedures. Preferred • Experience operating UV paint line equipment or automated coating/finishing systems., • Knowledge of UV coating applications, curing processes, and finishing operations., • Experience working in cabinet manufacturing, furniture manufacturing, woodworking, or related industries., • Forklift certification or willingness to become certified. Physical Requirements • Ability to stand, walk, bend, and move throughout the shift., • Ability to lift up to 50 pounds when necessary., • Ability to work in a manufacturing environment with exposure to machinery, noise, and industrial materials., • Ability to wear required personal protective equipment (PPE). Benefits • Weekly Pay, • Company Matching 401(k), • Medical, Dental, and Vision Insurance, • Life Insurance, • Paid Time Off (PTO), • Paid Holidays About Fabuwood Fabuwood is one of the leading kitchen cabinet manufacturers in the United States. We are committed to delivering exceptional quality, innovation, and customer service while fostering a culture of teamwork, accountability, and continuous improvement. Join a company where your contributions directly impact our success and growth.

Job Description Position Summary Fabuwood is seeking a skilled and dependable Edge Bander Machine Operator to operate our new edge bander during the night shift. This role is responsible for machine setup, operation, quality assurance, basic troubleshooting, and maintaining consistent production output. The ideal candidate will follow established Standard Operating Procedures (SOPs), perform routine machine inspections, and ensure all products meet Fabuwood's quality standards while maintaining a safe and efficient work environment. Key ResponsibilitiesMachine Operation Operate the edge bander independently throughout the night shift. Set up and monitor the machine to ensure optimal performance and production efficiency. Perform routine machine inspections, including copy wheels, glue pot, pressure settings, and other critical components. Monitor production output and make minor machine adjustments as needed. Quality Assurance Inspect finished products to ensure they meet quality standards and specifications. Immediately identify and report product defects or quality concerns. Follow established Standard Operating Procedures (SOPs) to maintain consistent product quality. Equipment Maintenance Perform basic troubleshooting to resolve minor mechanical or operational issues. Report equipment malfunctions or maintenance needs promptly to the Supervisor and Maintenance team. Maintain a clean and organized work area around the machine. Safety & Documentation Follow all company safety policies and proper material handling procedures. Complete required production reports, machine checklists, and documentation accurately. Communicate production updates, quality concerns, and operational issues to the appropriate team members. QualificationsRequired Previous experience operating manufacturing machinery or industrial equipment strongly preferred. Basic mechanical aptitude with the ability to perform minor troubleshooting. Strong attention to detail and commitment to product quality. Ability to read and follow written Standard Operating Procedures (SOPs). Reliable, self-motivated, and able to work independently during the night shift. English proficiency required; Spanish is a plus but not required. Benefits Weekly Pay Company Matching 401(k) Program Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Time Off (PTO) Paid Holidays About Fabuwood Fabuwood is the leading kitchen cabinet manufacturer in the United States. We believe that your kitchen cabinets should help create a sanctuary that offers the perfect balance of functionality and ambiance. With a wide selection of styles, materials, and finishes, Fabuwood provides beautiful, high-quality cabinetry while making luxury kitchens affordable without compromising on comfort, quality, or efficiency. Schedule: Monday – Thursday, 5:00 PM – 3:00 AM

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program. Position Summary: The Machine Operator will safely manage machines, ensuring equipment functions efficiently during the machining processes. The individual will adjust settings as necessary to accommodate diverse materials and specifications. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Key Responsibilities: 1. Machine Operation a.Ensure production maintains accuracy and performance by adjusting tools precisely and configuring machine settings, such as speed and feed, based on material requirements. b. Regularly inspect output using measuring tools like calipers and gauges to ensure quality. Promptly address any defects or issues to minimize waste and maintain product integrity. c. Reading and comprehensively understanding job orders and technical documents is crucial for ensuring precise and effective task execution. This involves thoroughly reviewing all instructions and specifications, identifying key requirements, and interpreting any technical terminology. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Accountability – Ability to accept responsibility and account for his/her actions., • Communication – Ability to effectively communicate with others verbally and in writing.Requirements: Skills and Abilities: • Working knowledge of precision machining equipment., • Meticulous attention to detail is imperative to ensure the production of high-quality and to identify potential errors before finalization., • Strong competency in using precision measuring instruments and tools relevant to quality assurance processes., • The ability to read and understand job orders, specifications, and technical documents is crucial for accurate task execution., • Basic troubleshooting skills and mechanical aptitude, with an ability to effectively diagnose issues in machinery and tools., • A thorough understanding of safety protocols and procedures is essential to maintain a safe working environment., • A high school diploma or equivalent is required; relevant certifications, vocational training, or an associate degree in a related field is preferred. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job DescriptionJob Title: Fabrication Machine Operator (Pharmaceutical) Location: West Caldwell, New Jersey Type: Contract Compensation: $22 - $23/Hour (based on experience) Contractor Work Model: Onsite Hours: Mon-Fri 2nd Shift: 2:15pm-10:30pm Duties and Responsibilities: • Operate vial filling machines, fabrication machines, and/or secondary packaging equipment including labels and semi-automatic packaging equipment.., • Meet established scrap rate goals., • Clean and set up manufacturing/packaging equipment., • Assure appropriate calibration stickers are current., • Record all necessary documentation in appropriate logbooks and batch records., • Communicate with IPC Operator and Supervisor on all issues concerning quality, components, and machine performance., • Palletize completed work and transport to warehouse as necessary., • Complete downtime log accurately and contemporaneously., • Assure that all reconciled labeling; e.g. pouch stock, inserts, shipper labels and waste is properly accounted for., • Communicate mechanical issues and other Production information with incoming and outgoing shifts., • Knowledgeable of all appropriate SOP’s and their practical application. Qualifications: • Must be able to successfully pass a respirator fit test to wear periodically, • Prior Pharma packaging experience required, • Ability to be gowned for manufacturing – wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, Tyvek suit, • Must possess good manual dexterity and visual acuity, basic reading, writing, verbal and math skills, • Must be able to lift and move 25-49lbs throughout shift, • High School Diploma or equivalent System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Machine Operator - URGENT HIRING Please note interviews will be held in person in Fairfield, NJ • Full-Time, • Monday - Friday, • 1st Shift: 6:00 AM - 3:00 PM, • Starting at: $20.50-21.50hr Depending on experience, • Proper PPE and Uniforms provided, • Health, Dental, Vision Looking for Machine Operators interested in a long-term opportunity, willing to learn and progress within the Natural Stone Fabrication field. Job Expectations: • Fabricate edges, sides, corner radius, angles, and sink cutouts using the tools required in the process, • Verify quality of finished workpieces by inspecting, comparing to templates, and measuring their dimensions, • Assist in minor repair and maintenance on assigned equipment, • Wearing all Personal Protective Equipment (safety glasses, earplugs, waterproof face mask, etc.), • Assuring that all work areas are cleaned and organized Experience Desired: • Experience in fabricating Marble, Granite, and Quartz, • Experience in Construction, Industrial, and Manufacturing fields, • Experience operating a Forklift, • Strong work ethic, • Tape measuring skills, • Basic math skills In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification (Form I-9) upon hire. Completion of a background check and/or drug screening may be required as a condition of employment, in accordance with local laws and client requirements.

Job Description Job Title: Production Operator C Classification: Hourly, Full Time, Non-Exempt Department-Location: Production - NJ Direct Supervisor: Production Supervisor Job Summary: The Production Operator “C” position is an entry-level position that primarily focuses on ensuring product quality control by utilizing various sampling and analytical testing protocols. This position also supports multiple departmental non-essential or critical functions as directed by supervision (supports B, A, and Lead Operators). This position requires some computer skills for data entry, e-mail communication, and the creation of work requests. This position may require working a rotating schedule. Supervisory Responsibilities: • None Essential Responsibilities: • Assists the Lead Operator or A Operator in monitoring process equipment and making necessary adjustments, as directed, to maintain process parameters as specified within Standard Operating Procedures (SOP’s)., • Performs sampling and analysis to maintain process and finished product specifications., • Maintains operation of filter presses by placing them on or offline for cleaning., • Loads waste materials into hoppers from filter presses., • Maintains salt storage area and adds salt to each saturator as needed. Must have the ability to safely operate a front-end loader (heavy equipment)., • Maintains the brine guard filters by replacing the filtering media as needed., • Maintains the body feed tanks by adding water and cellulose bags to each tank as required., • Operates and maintains plant utility equipment (air, water, steam, etc.) as directed., • Archives and organizes process records as instructed by supervision., • Provides housekeeping throughout the facility. Keeps the plant in order/clean condition. Maintains an inventory of necessary supplies for various departments as instructed by supervision., • May be assigned facilities maintenance duties as needed., • Performs inventory reconciliation on the laboratory reagent chemicals., • Provides support during railroad drills., • Assists with answering phones during off-hours., • Assists with the handling of non-EHS railcars., • Assists with electrolyzer cell rebuilding., • Always wears appropriate safety equipment., • Provides awareness level support to on-site incidents., • Serves as a member of The Facility Security Staff., • Provides escort service for facility visitors., • Performs other duties as assigned by supervision. Required Skills/Abilities: • Must have the capability of using Fall Suppression Equipment., • Must have a valid driver’s license and reliable transportation., • Medically qualified to participate in the Hazmat Team*., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain good standing order, as per TSA’s TWIC criteria., • Medically qualified means the employee must submit to an annual physical which may include a drug screening. Education and Experience: • High School diploma or equivalent. Experience working in a chemical manufacturing facility is a plus. Physical Requirements: • Frequently climbs stairs and ladders., • Frequently bends, stands, and lifts to 40lbs., • Must be able to work outdoors in different climate conditions., • Must be able to sit for extended periods., • Must be able to walk on secure elevated process platforms more than 15-foot heights. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionEdge Band Operator – 2nd ShiftPay: Starting at $25.00/hour Location: Carlstadt, NJ Schedule: Monday–Friday, 3:15 PM–11:30 PM Employment Type: Full-Time Department: Production Reports To: Production SupervisorJob SummaryWe are looking for an experienced Edge Band Operator to join our Production team in Carlstadt, NJ.The Edge Band Operator will be responsible for setting up and operating the edge banding machine to apply edge banding to wood doors while ensuring finished parts meet company quality and dimensional standards.The ideal candidate will have 3+ years of experience operating an edge banding machine and a strong background in door or cabinet manufacturing.Key Responsibilities • Set up and operate the edge banding machine for door production., • Load materials and select the correct edge band tape/material for each job., • Adjust machine settings, including speed, glue temperature, and trimming, for different materials and thicknesses., • Inspect finished edges for glue lines, chipping, gaps, proper adhesion, and accurate trimming., • Perform routine machine cleaning, minor maintenance, and troubleshooting., • Stage and safely move completed parts to the next production station., • Read and follow basic cut lists, production tickets, and work orders., • Report material shortages, machine issues, and quality concerns to the Production Supervisor., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality standards.Requirements, • Minimum 3 years of experience operating an edge banding machine., • Door or cabinet manufacturing experience required., • Ability to read and understand basic cut lists, tickets, and work orders., • Strong attention to detail and commitment to quality., • Ability to work efficiently in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work effectively as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move materials up to 50 lbs., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Job Description Imagine your first week at LAPP You’re welcomed into a family-owned company founded in Stuttgart in 1959—now 5,800 strong across 80+ countries—where curiosity, initiative, and tradition live side by side. A mentor walks you through the production floor, introduces the extrusion line, and hands you a traveler with customer requirements. You set up the machine, verify dimensions using micrometers and calipers, and watch the first length of product meet spec. By week’s end, you’re collaborating across shifts, solving small process hiccups, and taking pride in a clean, safe, efficient workspace. What success looks like • Production goals met without compromising safety or quality., • Accurate setups, smooth changeovers, and thorough teardowns., • Confident troubleshooting and adjustments to keep output steady., • Clear verification of customer requirements and adherence to job instructions., • An organized workstation and a willingness to jump in and help teammates. Choose your shift, • 6:00 AM – 2:00 PM, • 2:00 PM – 10:00 PM (shift differential), • 10:00 PM – 6:00 AM (shift differential) Do you bring the right background?, • High school diploma, strong math, and basic computer literacy., • 1–3 years as a machine operator (CNC, machinist, or extruder)., • Experience in process-driven manufacturing; wire & cable exposure preferred., • Required: hands-on use of micrometers and calipers., • Must be 18+ years old. Physical environment, • Periodic work in confined spaces—precision and safety first., • Standing for as much as 80% of your shift., • Occasional sitting; climbing/balancing; stooping, kneeling, crouching, or crawling., • Capability to maneuver, move, push, and lift up to 80 lbs. Communication expectations Comfort reading safety rules, operating/maintenance instructions, and procedures; writing routine reports/correspondence; and speaking effectively to employee groups. English fluency (written and verbal) required. Pay, perks, and purpose Earn $25.00/hour (paid weekly) with participation in LAPP’s bonus plan. Enjoy Medical, Vision, Dental, Paid Time Off, Paid Holidays, 401(k), HSA/FSA, Life Insurance, and more—while helping build products that power and connect the world. Your toolkit • Extrusion machine (primary), • Manual machining capability, • Plastic extrusion experience, • Manufacturing environment know-how Equal Opportunity LAPP is an equal opportunity employer

Job Description 2nd Shift Saw Operator / Cut Shop Schedule: 3:00 PM – 11:30 PM Pay Rate: $21/hr (Based on experience) Job Type: Temp-to-Hire We are seeking an experienced Saw Operator / Cut Shop Associate to join our 2nd shift production team. The ideal candidate will have experience operating saw equipment and the ability to accurately measure, cut, and prepare wood materials according to specifications while maintaining high-quality standards. Responsibilities: • Operate upcut saws and table saws to cut materials accurately according to job specifications, • Measure materials using tape measures and other measuring tools, • Inspect finished cuts to ensure accuracy and quality requirements are met, • Follow all safety procedures while operating machinery, • Maintain a clean and organized work area, • Support daily production goals in a fast-paced manufacturing environment Qualifications:, • Previous experience operating upcut saws and/or table saws required, • Ability to read and interpret measurements accurately, • Strong attention to detail and commitment to quality, • Ability to safely operate production equipment, • Manufacturing, woodworking, or similar production experience preferred, • Reliable and safety-focused team player Opportunity: Temp-to-hire position with potential for long-term employment based on performance and attendance.

Job DescriptionBenefits: • Health insurance, • Paid time off Machine Operator/Factory Worker for a Manufacturing Company in Livingston NJ. Currently hiring for a machine operator position at our small manufacturing company in Livingston. Responsibilities include: -Operating machinery -Loading and Unloading machines -Packaging products -Assisting others at the factory when needed. Training will be provided. Tape measure or factory experience is helpful. Applicants MUST BE able to stand for long periods and lift up to 70 lbs. Hours: -Monday to Friday 8 - 4:30 -Summer hours - Monday to Thursday 7 - 4:30 and Friday from 7 - 12. Benefits: -Medical Health Insurance -Paid Vacations -Paid Holidays -Full-time hours and overtime Pay Spanish speakers are welcome; some English is required.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure, • Must be able to walk and climb up/down stairs and ladders (portable, fixed). Ability to lift up to 50 pounds and perform physical tasks requiring standing, bending, and walking for extended periods., • Must have the appropriate level of sensory acuity (visual, hearing, speaking, smell and touch) to be able to identify and react to normal, abnormal and alarm conditions (chemicals, temperature, etc.) Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $18.06 Full Time Employee Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: https://www.stratasfoods.com/compliance Stratas Foods California Privacy Rights Act Policy: https://www.stratasfoods.com/compliance

Job Description Job Title: Press Brake Operator (2nd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Contractor Work Model: Onsite Hours: 40.0 hours per week Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Job Title: Press Brake Operator (3rd Shift) Location: Kearny, New Jersey Compensation: $49,920.00 to $56,160.00 Hours: 11pm-7:30am Responsibilities • Operate and program CNC Press Brake machines, primarily Amada, setting up machinery, and performing test runs on materials., • Use CAD programs, basic hand tools, measurement instruments, and fine measuring tools to ensure accurate production., • Inspect production parts for defects and ensure they meet quality standards., • Perform routine maintenance on machinery to maintain optimal operation., • Communicate with production leads to meet deadlines and follow production schedules., • Maintain a clean and safe work environment, adhering to safety, operational, and regulatory standards in collaboration with Quality and Environmental Departments. Requirements • High school diploma or equivalent required; post-high school education or training preferred., • At least one (1) year of manufacturing experience pressing, bending, or stamping metal., • Familiar with Press Brake programming and setup., • Ability to read and interpret 2D prints, 3D models, and work instructions., • Experience in sheet metal fabrication is required., • Willingness to work in a fast-paced manufacturing environment. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job DescriptionWeb-Fed Finishing Equipment Operator Location: Fairfield, NJ 07004 Schedule: Full-time with overtime potential | All Shifts Available Are You Built for Precision? Do you stay calm and focused while machines are running at speed? Do you notice a change in sound before others do? At Unifoil, you’ll turn attention to detail into high-quality output by operating laminators, sheeters, and slitters—always with safety first and a helper by your side. You will not be expected to run large lines alone. Your Challenge • Set up, operate, and shut down laminating, sheeting, and slitting equipment safely., • Follow work orders and operating procedures to meet job requirements., • Monitor gauges, controls, and machine performance throughout each run; make routine adjustments within established limits., • Coordinate with your assigned helper to stage materials and keep production flowing efficiently., • Inspect materials and finished goods for visible defects and verify outputs meet specifications., • Record production quantities, material consumption, downtime, and other required data., • Stay alert to unusual sounds, motion, or conditions; stop equipment and notify a supervisor or maintenance immediately., • Handle routine cleaning and basic operator-level maintenance., • Keep your work area organized and safe; follow all PPE, machine guarding, and safety policies., • Communicate clearly with helpers, supervisors, quality, maintenance, and other operators., • Support the team by working overtime when available.What You Bring, • Comfort working around and operating large industrial equipment., • Ability to follow written and verbal instructions., • Strong commitment to safety, quality, and accuracy., • Dependable attendance and punctuality., • Ability to maintain focus while monitoring running equipment., • Teamwork and communication skills., • Motivation to learn laminating, sheeting, and slitting operations., • Willingness to work overtime when required., • High school diploma or equivalent.Preferred, • Experience in machine operation, production, manufacturing, or heavy equipment., • Familiarity with laminators, sheeters, slitters, printing/converting equipment, or roll-fed machinery., • Mechanical aptitude; quickly recognizes when equipment isn’t operating normally., • Experience with work orders, quality checks, or manufacturing documents.How We Set You Up to Succeed We provide structured training on: • Laminators, sheeters, slitters, and related systems, • Machine controls and SOPs, • Safe operating practices, • Material and product requirements, • Basic quality inspections, • Production documentation and reporting, • Effective collaboration with assigned helpers If you bring a solid work ethic, mechanical curiosity, and a willingness to learn, you’ll grow quickly—no prior experience on Unifoil’s specific equipment is required. Physical & Work Realities • Active plant environment around large moving machinery and typical industrial noise., • Extended standing and walking., • Frequent bending, reaching, and material handling., • Use of required PPE., • Overtime based on production demands and your availability.Who We Are Unifoil is a global leader in laminating, coating, and metallizing technologies. For more than five decades, we’ve helped brand owners, packaging designers, printers, and others deliver distinctive packaging and specialty applications. We combine manufacturing expertise, technical innovation, and an environmentally conscious approach to create specialty substrates, products, and solutions that stand out.

Job DescriptionCNC Machine Operator$20/HR – ENTRY-LEVEL – PAID TRAININGLocation: Hillside, NJStart a career in manufacturing—no CNC experience required!We are hiring Entry-Level CNC Machine Operators for a well-established manufacturing company with over 60 years in business. We're looking for dependable people who enjoy hands-on work, are eager to learn, and want a long-term opportunity.We provide paid training to help you develop the skills to succeed.JOB DUTIES: • Learn to operate CNC machines safely and correctly., • Load and unload parts., • Learn to check measurements using calipers and micrometers., • Follow production instructions and quality standards., • Keep your work area clean and organized., • Follow all safety procedures.REQUIREMENTS:, • Reliable attendance and punctuality., • Strong work ethic and attention to detail., • Willingness to learn and follow instructions., • Comfortable working with your hands and using tools., • Able to work well with others.Warehouse, construction, manufacturing, or mechanical experience is a plus—but not required.WHAT WE OFFER:, • Starting pay of $20 per hour., • Paid training., • Overtime opportunities., • Opportunities for raises and promotions based on performance and skill development., • A long-term opportunity to learn a valuable trade.HOW TO APPLY:Call or text 917-935-9741.Leave your name and mention CNC JOB.Interviews are starting immediately. If you're ready to learn, show up consistently, and build a career, we want to hear from you!Applicants must be authorized to work in the United States.

Job Description UTRS Advanced Manufacturing (UTRS AM) is currently seeking a 2nd Shift Lathe Operator to join our team! At UTRS AM, we enjoy the benefits of working in a collaborative environment of close-knit team members. As a company, we provide a wide range of leading-edge engineering, management, and digital services to the public and private sectors. We are looking for someone that will support our mission to consistently deliver creative, high-quality, technology-based services to our customers on time and within budget. This position is responsible for keeping the lathe machines up and running during our 2nd shift. This position is located at 19 Just Rd in Fairfield, NJ 07004. What will you be doing? This position will be a key member of the Lathe Department. Duties include: • Operating CNC lathes (Doosan Lynx 220, LSYC, Haas TL1)., • Perform in-process quality inspection, • Basic shop responsibilities – cleaning machine at end of shift, organizing workstation. What skills will the ideal candidate have to be successful? This position will require the following skillsets and experience: • 1 - 3 years’ experience in CNC machining, • Blueprint reading, GD&T, • Basic bench-top inspection, • Must be US Citizen Read about our benefits here: Our Benefits - UTRS | Always, Got Your Back UTRS is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. UTRS is a drug-free workplace with pre-employment drug testing and background verifications. For more information or to apply now, go to the website below: https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf https://www.dol.gov/agencies/ofccp/vevraa/self-id-form

Job Description Job Summary We are seeking a dedicated and skilled Chemical Operator to join our team. The ideal candidate will be responsible for the safe and efficient operation of chemical processes, ensuring compliance with industry standards and regulations. This role requires a strong understanding of materials handling, lean manufacturing principles, and the ability to work collaboratively within a dynamic environment. Responsibilities • Operate and monitor chemical processing equipment to ensure optimal performance., • Handle materials safely and efficiently, adhering to all safety protocols., • Fabricate and package products according to established guidelines and specifications., • Maintain compliance with Current Good Manufacturing Practices (CGMP) throughout all processes., • Conduct routine inspections of machinery and equipment, performing basic troubleshooting as needed., • Collaborate with team members to implement lean manufacturing techniques for process improvement., • Assist in laboratory testing and quality control measures to ensure product integrity., • Operate forklifts and other warehouse equipment safely as required., • Start with brief training on day shift (8:00 AM–4:00 PM) before moving to your permanent schedule (6:00 PM–6:00 AM) Requirements • Previous experience in a chemical processing or manufacturing environment is preferred., • Must live within 40 minutes of Kenilworth, NJ, • Strong knowledge of materials handling techniques and safety practices., • Familiarity with lean manufacturing principles is advantageous., • Experience in packaging and fabrication processes is a plus., • Understanding of CGMP regulations is desirable., • Proficiency in machining operations is beneficial., • Ability to operate forklifts and other warehouse machinery safely., • Strong attention to detail, problem-solving skills, and the ability to work effectively in a team setting., • Comfortable with night shifts and long shifts (12 hours) Join a Legacy of Reliability We’re not just offering a job — we’re offering a career with a company that values commitment, safety, and hard work. Our low turnover and no-layoff record speak for themselves. Apply Now Send your resume or brief summary of experience to: Mon Benlayo, EA to CEO – mon at synray.com Synray Corp. is an Equal Opportunity Employer – welcoming all applicants regardless of race, gender, age, or background. Job Type: Full-time Pay: $22.00 - $25.00 per hour based on experience Expected hours: 48 per week Benefits: • 401(k) matching, • Health insurance, • Paid time off Schedule: • 12 hour shift, • Evening shift Ability to Commute: • Kenilworth, NJ 07033 (Required) Ability to Relocate: • Kenilworth, NJ 07033: Relocate before starting work (Required) Work Location: In person \nCompany Description Synray Corp. is a leading manufacturer of high-performance specialty chemicals and coatings, serving industries including automotive, industrial, and protective applications. With a focus on innovation, quality, and customer partnerships, Synray delivers advanced solutions tailored to meet the evolving needs of global manufacturers and formulators. Synray Corp. is a leading manufacturer of high-performance specialty chemicals and coatings, serving industries including automotive, industrial, and protective applications. With a focus on innovation, quality, and customer partnerships, Synray delivers advanced solutions tailored to meet the evolving needs of global manufacturers and formulators.

Job DescriptionAssembly Operator – Glass Kits | 2nd Shift$25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-HireLocation: Carlstadt, NJ Job Type: Full-Time, Temp-to-Hire Shift: 2nd Shift Pay: Starting at $25.00/hour About the Opportunity We are currently hiring an experienced Assembly Operator – Glass Kits for our client, a manufacturing company located in Carlstadt, NJ. The Assembly Operator will be responsible for assembling glass kits into wood doors while ensuring proper fit, sizing, alignment, and finish. The ideal candidate will have hands-on experience working with moldings, measuring and cutting materials, installing molding, and applying caulk to a professional finished standard. Responsibilities • Assemble glass kits into doors according to job specifications., • Measure and accurately cut moldings to required dimensions., • Confirm door openings and verify the correct glass size before installation., • Install molding around glass units according to specifications., • Apply caulk neatly and consistently for a clean finished appearance., • Inspect completed doors for gaps, defects, misalignment, and overall quality., • Read and follow job tickets and work orders to confirm specifications., • Report material shortages, dimensional discrepancies, or other issues to the Production Supervisor., • Maintain a clean, organized, and safe assembly workstation., • Handle glass components carefully and follow all applicable safety procedures.Requirements, • Minimum 3 years of experience assembling with moldings required., • Experience measuring and cutting moldings accurately., • Experience verifying door openings and glass sizing for proper fit., • Experience installing molding and applying caulk to a finished standard., • Ability to read and understand job tickets and work orders., • Strong attention to detail and craftsmanship., • Ability to work accurately and efficiently in a production environment., • Reliable attendance and punctuality., • Ability to work independently and as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move doors and glass units up to 75 lbs., with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to carefully handle glass components., • Ability to safely perform the physical requirements of a manufacturing environment.

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • Not required. Minimum Previous Experience: • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC., • Read measuring tape, gauges, and calipers, • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job DescriptionJob Title: Press Setup OperatorJob Description The Press Setup Operator sets up compound and progressive tooling and maintains a strong working knowledge of all machinery in the pressroom. This role interprets customer drawings, selects appropriate materials for each job, organizes and maintains tooling and setup equipment, and ensures accurate and safe operation of presses under the guidance of the Production Supervisor or Production Manager. Responsibilities • Receive job assignments and select the appropriate material, tooling, and documentation for each job., • Set up all types of dies, including stamping dies, draw dies, and progressive dies, to meet production requirements., • Perform setup of presses and tooling for stamped metal components, ensuring proper alignment and operation., • Set up related processes and equipment, including shields, feeds, air cushions, stock reels, scrap cutters, lubricants, and other associated devices., • Interpret customer drawings and specifications to ensure parts meet required standards and dimensions., • Use a variety of measurement instruments to verify part dimensions and quality during setup and first-piece inspection., • Perform first-piece inspections and assist with quality control as needed to ensure products meet specifications., • Input all required router and production data into the computer system to maintain accurate production records., • Complete all required documentation accurately and on time, ensuring traceability and compliance., • Instruct press operators on the proper use of safety devices, setup parameters, and standard operating procedures., • Direct press operators on what jobs to run and provide guidance during changeovers and setups., • Operate with minimal guidance, troubleshooting setup issues and making necessary adjustments to improve performance., • Ensure the accuracy and completeness of all related records, including setup sheets and production logs., • Maintain a clean, organized, and obstruction-free work area to support safe and efficient operations., • Adhere to ISO 9001:2015 and AS9100 standards in daily work practices and documentation., • Identify and implement improvements and innovations beyond the immediate scope of assigned responsibilities., • Maintain important job-related data using computer systems and basic computer knowledge., • Observe all safety regulations and consistently use appropriate safety equipment and protective devices., • Assist employees with work-related inquiries and support a collaborative pressroom environment., • Perform other related responsibilities as necessary to support production and team goals.Essential Skills, • Hands-on experience setting up stamping dies, draw dies, and progressive dies in a pressroom environment., • Mechanical aptitude and ability to work with sheet metal and stamping operations., • Proficiency in setting up presses and associated equipment such as feeds, shields, air cushions, stock reels, scrap cutters, and lubrication systems., • Ability to interpret and understand customer drawings and technical documentation., • Experience using measurement instruments and measuring tools to verify part dimensions and quality., • Ability to use hand tools safely and effectively for setup and adjustment tasks., • Basic computer skills to input router and production data and maintain accurate records., • Ability to work with minimal guidance, troubleshoot setup issues, and make sound decisions., • Capability to sit, stand, bend, and lift up to 60 lbs as required by the role., • Strong awareness of safety regulations and proper use of safety equipment.Additional Skills & Qualifications, • Familiarity with sheet metal manufacturing and stamped metal component production., • Experience working in a pressroom environment with progressive die operations., • Understanding of ISO 9001:2015 and AS9100 standards and their application in daily work., • Ability to instruct and guide operators on safe operation and proper use of safety devices., • Strong organizational skills to maintain tooling, setup equipment, and work areas in an orderly condition., • Willingness to contribute ideas and innovations beyond assigned responsibilities.Why Work Here? This is an opportunity to join a family-owned organization that is committed to growth and long-term stability. You will work in an environment where your skills and initiative are valued, and where there is clear opportunity for professional development and advancement as the company continues to expand. The culture emphasizes teamwork, respect, and continuous improvement, offering you a place to build a lasting career while contributing to a growing operation. Work Environment The role is based in a metal manufacturing environment that is climate controlled to support comfort and consistency in production. You will work around presses, dies, and related equipment in a structured, safety-focused setting. The position requires regular sitting, standing, bending, and lifting up to 60 lbs, as well as frequent use of hand tools and measuring instruments. The facility emphasizes cleanliness and organization, with a strong focus on maintaining a safe, efficient, and orderly pressroom. Job Type & Location This is a Contract to Hire position based out of Springfield, NJ. Pay and Benefits The pay range for this position is $25.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Springfield,NJ. Application Deadline This position is anticipated to close on Oct 16, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionA precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications. Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabrication techniques. SUMMARY: The CNC Operator II is responsible for operating Swiss-style CNC machines to produce precision components according to specifications. This intermediate-level role requires strong machine operation skills, the ability to interpret blueprints, and basic troubleshooting ability. The CNC Operator II works with limited supervision, is expected to complete the majority of change-over/start-up tasks and may help train entry-level operators while maintaining high standards for safety, quality, and efficiency. SUPERVISORY RESPONSIBILITIES: This role does not have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: *Reviews blueprints to determine setup procedures to follow, machine tools required and stock to use. *Selects machine tooling and installs them on the machine. *Capable of setting guide bushings, collets and working with bar feeders with minimal supervision. *Load and edit as required machine programs. *Makes a trial run and tests for conformance to specifications using gauges, comparators, micrometers and calipers. *Adjust the machine to attain specified tolerances. *Understand blueprints and be able to use a variety of precision measuring devices. *May recommend program and or tool changes to resolve production problems. *May make tools and attachments, such as forming tools and cut-off tools, if not in stock. *Responsible for form tool sharpening and maintenance. *May work/train in other departments where needed. $23 - $36 an hour SKILLS & COMPETENCIES: *CNC machine operation and setup *Blueprint reading and GD&T interpretation *Precision measurement and quality inspection *Troubleshooting and problem-solving *Attention to detail and accuracy *Time management and efficiency *Safety awareness and compliance *Ability to read and interpret part specifications or blueprints. *Detail-oriented. *Good verbal and communication skills. EDUCATION & EXPERIENCE Required Must have a Minimum of two (2) years" experience in CNC operations and setup, specifically Swiss-style machining/turning *Proficiency with basic CNC setup, offsets, and tool changes. *Strong ability to read blueprints and understand GD&T symbols. *Skilled in using precision measurement tools (calipers, micrometers, height gauges, etc.). *Basic understanding of machining principles, speeds/feeds, and material properties. *Familiarity with safety standards and best practices in a machining environment. Desired *Any experience lathes, mills, CNC machines, etc. a plus. *Experience on Citizen Swiss machines. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job Description Premium Color Group is seeking an experienced, hands-on Wide Format & Digital Print Department Manager to oversee the daily operation of our wide format, digital print, and finishing department. This position is ideal for someone with strong print production experience who is comfortable managing people and schedules while also being willing to step in and operate equipment when necessary. Responsibilities • Manage the daily production schedule for the Wide Format and Digital Print departments., • Supervise, direct, and support department employees., • Prioritize jobs to meet customer deadlines and production requirements., • Coordinate workflow between printing, cutting, and finishing operations., • Monitor job quality, productivity, and department efficiency., • Work closely with Customer Service, Estimating, Prepress, and other production departments., • Ensure equipment is properly maintained and preventive maintenance is completed on schedule., • Coordinate service calls and repairs directly with equipment manufacturers and technicians., • Troubleshoot production, equipment, and workflow issues., • Maintain an organized, safe, and productive work environment., • Help operate production equipment when workload or staffing requires it., • Monitor materials and supplies and communicate purchasing needs., • Identify opportunities to improve throughput, reduce waste, and improve overall department performance. Equipment in the Department Our department includes: • EFI high-speed wide format flatbed printers, • Kongsberg digital cutting tables, • Ricoh production digital presses, • Guillotine cutting, • Folding, scoring, and booklet-making equipment, • Additional digital print finishing equipment Experience with EFI, Kongsberg, Ricoh, or similar production equipment is a strong plus, but experience managing a comparable commercial printing operation is equally important. Qualifications • Previous experience in commercial printing, wide format printing, digital printing, signage, packaging, or a related manufacturing environment., • Previous supervisory, lead operator, or production management experience preferred., • Strong understanding of print production workflow and scheduling., • Mechanical aptitude and the ability to troubleshoot equipment and production issues., • Strong organizational and communication skills., • Ability to manage multiple jobs and changing priorities in a deadline-driven environment., • Comfortable working directly with equipment manufacturers and service technicians., • Working knowledge of quality control and preventive maintenance procedures., • Hands-on attitude and willingness to assist the production team when needed. What We're Looking For We are looking for someone who takes ownership of the department. The right person will make sure jobs move through production efficiently, employees know what is expected of them, equipment is maintained properly, and customer deadlines are met. This is a position for someone who enjoys both managing people and being involved in the actual production process. \nCompany Description Why Work for Premium Color Group? Premium Color Group is an established commercial printing and packaging company with a diverse mix of commercial print, digital print, wide format print, packaging, and finishing capabilities. We operate a fast-paced production environment where experienced employees are trusted to make decisions and have a direct impact on the success of the company. We offer a stable work environment, modern production equipment, varied and interesting projects, and the opportunity to work in an important part of our manufacturing operation. Why Work for Premium Color Group?\nPremium Color Group is an established commercial printing and packaging company with a diverse mix of commercial print, digital print, wide format print, packaging, and finishing capabilities. We operate a fast-paced production environment where experienced employees are trusted to make decisions and have a direct impact on the success of the company.\nWe offer a stable work environment, modern production equipment, varied and interesting projects, and the opportunity to work in an important part of our manufacturing operation.

Job Description Position Title: Manufacturing Engineer II – Energetics & CAD/PAD Salary Range: $85,000 – $105,000 / year Locations: Fairfield, NJ & Byram, NJ (On-site / Multi-facility travel) Employment Type: Full-Time Company Overview We design, develop, and manufacture mission-critical energetic, pyrotechnic, Cartridge Actuated Devices (CAD), and Propellant Actuated Devices (PAD). Our products serve high-consequence applications across aerospace, defense, government, and commercial sectors where ultra-high reliability, precision manufacturing, and strict process repeatability are mandatory. Role Summary The Production Engineer II bridges the gap between design engineering and shop-floor execution. This role is responsible for planning, establishing, and optimizing manufacturing and assembly processes for energetic hardware, custom tooling, and precision-machined components. Working under general direction, the Production Engineer leads Design for Manufacturability (DFM) transitions, designs machine shop fixturing, develops work instructions (routers/SOPs), resolves manufacturing non-conformances (MRB), and drives continuous process improvements within an AS9100 / ISO 9001 quality framework. Key Responsibilities • Manufacturing Process Planning & Routing: Establish, maintain, and optimize manufacturing bills of materials (MBOMs), assembly routers, standard operating procedures (SOPs), and detailed shop floor work instructions., • Tooling & Fixture Engineering: Design and implement custom assembly tooling, machine shop fixtures, energetic loading aids, and inspection gages to enhance manufacturing throughput and operator safety., • New Product Introduction (NPI) & DFM: Partner with Design Engineering during PDR/CDRs to ensure robust Design for Manufacturability (DFM) and Design for Assembly (DFA), executing smooth handoffs from R&D into production., • Discrepancy Resolution & MRB: Act as engineering authority on the Material Review Board (MRB); disposition non-conforming hardware, perform root-cause failure analyses (8D, 5-Why, Fishbone), and implement Corrective and Preventive Actions (CAPA)., • Process Capability & Risk Mitigation: Conduct Process Failure Mode and Effects Analyses (PFMEA) and implement Statistical Process Control (SPC) to minimize variance and eliminate assembly risks in energetic operations., • Machine Shop & Assembly Floor Support: Provide day-to-day technical support to machine shop machinists, assembly technicians, and pyrotechnic handling teams to resolve production bottlenecks and machining/assembly challenges., • Quality & Cybersecurity Standards: Maintain strict adherence to AS9100 / ISO 9001 quality management systems, NIST SP 800-171 / CMMC Controlled Unclassified Information (CUI) safeguarding protocols, and ATF energetic handling regulations. Required Qualifications Education: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Materials Science, or a related discipline. Experience: 3–5+ years of production, manufacturing, or process engineering experience in precision aerospace, defense, ordnance/energetics, medical device, or high-reliability electromechanical manufacturing. Technical Skills: Proficiency in reading and interpreting complex engineering drawings using ASME Y14.5 GD&T.Experience designing assembly jigs, machining fixtures, or inspection tooling using 3D CAD (SolidWorks preferred).Strong working knowledge of conventional and CNC machining, metal finishing/plating, and precision mechanical assembly methods. Quality & Systems: • Practical experience with ERP/MRP systems (e.g., SAP, SyteLine, Epicor, Sage) for routings, BOMs, and engineering change implementation., • Working knowledge of AS9100 / ISO 9001 quality management systems and structured root-cause problem-solving (8D, CAPA). Legal & Regulatory Requirements: • Must be a U.S. Person (U.S. Citizen or Permanent Resident) to satisfy ITAR and EAR requirements.Must be able to obtain and maintain an ATF Employee Possessor status. Desired Skills & Experience • Machine Shop Proficiency: Hands-on machine shop skills (manual lathe, mill, tooling setup) to evaluate and troubleshoot machining processes directly on the floor., • Energetics Handling: Prior experience with pyrotechnic loading, explosive presses, hermetic sealing, or hazardous material safety standards (DoD 4145.26-M, OSHA)., • Lean / Continuous Improvement: Practical experience with Lean Manufacturing principles (5S, Value Stream Mapping, Kaizen, SMED, Line Balancing) or Six Sigma Green Belt., • CUI / Defense Compliance: Prior training or exposure to Controlled Unclassified Information (CUI) handling procedures under NIST 800-171 / DFARS. Work Environment & Physical Demands • Active, hands-on environment split between the manufacturing production floor, machine shop, energetic loading/assembly cells, and office engineering spaces., • Routine local travel between our Fairfield, NJ and Byram, NJ facilities (must possess a valid driver's license)., • Physical activity includes walking, standing for extended periods on the manufacturing floor, bending, reaching, and occasionally lifting up to 40 lbs of tooling, fixtures, or raw materials.

Job Description Company Info Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste, lowering disposal costs and fueling local supply chains by ensuring materials are recovered, recycled, and reused. About the Role: Supervise and coordinate activities of workers engaged in operating machines that process (screen, sort, separate and bale) household recyclable materials such as metal, glass, plastic, paper and cardboard. Shift: 3rd ,12AM-8:30AM (Job Type: Full-time) | Location: Jersey City, NJ • Health, Dental, Vision insurance, • FSA, • Vacation Time, • 401k Matching, • Employee Assistance Program, • Paid Parental Leave, • Tuition Reimbursement Responsibilities: • Develop familiarity with and ensure compliance with safety, health, environment and community company policies and procedures as they pertain to facility operations and equipment usage and operation, • Observe sorting, equipment operation, processing and bailing operations, • Assign duties to workers according to production schedules and demonstrate safe, efficient use of equipment, • Inspect machinery and equipment to verify conformance to production standards, • Prepare time, attendance and production reports, • Ability to manage personnel (Approx. 53 employees) and lead by example, • Multi-task and willingness to learn all areas of operations, • Must be able to lead process and quality teams on improving workflow and quality, • Enter production data and other information on the computer, • Perform other duties as assigned Minimum Job Qualifications: • High school diploma or general education degree (GED); or equivalent business experience required Preferred Job Qualifications: • Previous supervisory skills in a diverse, fast-paced manufacturing/production environment, • Excellent mechanical ability and strong analytical skills, • Demonstrated ability to follow procedure and work from a set of written instructions, • Ability to work in a plant processing environment for extended periods of time, • Strong verbal, written and interpersonal communication skills, • Flexibility required to work successfully on a team, • Active individual who will be comfortable spending most of the day walking, • Basic computer skills, • Good time management and multi-tasking ability, • Must speak and understand English; Spanish spoken and written fluency is a plus Working Conditions and Physical Requirements: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, and feel. Reach with hands and arms; climb or balance and talk or hear. The employee is required to walk and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Must be able to work outside under extreme temperature conditions. (Heat, cold, etc.), • While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; outside weather conditions and vibration. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually loud. EEOC:

Job Description Product Development Manager / Director Jersey City, NJ | Onsite $175,000–$225,000 + Bonus Overview We are seeking a hands-on Product Development Manager/Director to lead consumer product sourcing and development while managing the Sourcing, Quality Control, and Logistics teams. The ideal candidate has strong China sourcing and manufacturing experience, knows how to negotiate with factories, and can solve product and production problems from concept through completion. This is a working leadership role. Management experience is important, but hands-on product and sourcing experience is essential. Responsibilities • Lead sourcing and development of consumer products from concept through production., • Source and develop relationships with manufacturers, primarily in China., • Negotiate pricing, MOQs, quality, terms, and production requirements., • Find creative ways to achieve additional cost savings when standard negotiations have reached their limit., • Identify new vendors and products through trade shows, market research, Panjiva, AI, and other resources., • Consolidate company needs and develop sourcing strategies around cost, quality, and availability., • Solve manufacturing, quality, and production issues with suppliers and internal teams., • Manage and mentor the Sourcing, Quality Control, and Logistics teams., • Stay directly involved in sourcing, supplier negotiations, and product development., • Work closely with ownership to identify opportunities and drive results., • Build strong, long-term relationships with factories, vendors, employees, and ownership. Requirements • Significant consumer products experience., • Strong China sourcing and factory experience., • Proven experience negotiating with manufacturers., • Experience developing a product through production, including solving manufacturing challenges., • Management or team leadership experience., • Strong understanding of sourcing, manufacturing, quality control, and logistics., • Excellent problem-solving and negotiation skills., • Comfortable working across multiple product categories., • Strong supplier and relationship-management skills., • Comfortable using AI, market data, and import/shipment information to research products and manufacturers., • Willingness to travel to trade shows and supplier meetings. Who You Are You are a hands-on operator, not someone who wants to manage from a distance. You know how to work with factories, solve problems, negotiate creatively, and get products across the finish line. You can lead and mentor a team while continuing to do the work yourself. The ability to learn new categories quickly and find practical solutions is critical. Does this role speak to you? Apply Now, email your resume to: nechi@maiplacement.com

Job DescriptionJoin the FM Expressions Team as a Warehouse Associate! Location: 565 Windsor Dr., Secaucus, NJ 07094 Job Type: Full-Time Pay Rate: $18.00 + Shift: Monday to Friday 6:30AM - 3:00PM Are you an experienced forklift operator who takes pride in keeping a warehouse organized, safe, and running efficiently? FM Expressions is looking for a Warehouse Receiving Specialist to join our team! In this role, you'll help keep our warehouse operations moving by receiving and organizing incoming materials, maintaining inventory, picking apparel and products according to customer requirements, and safely transporting materials throughout the facility. If you're dependable, safety-conscious, organized, and enjoy hands-on work in a fast-paced manufacturing environment, we'd love to hear from you! What You'll Do • Safely operate forklifts to move materials, products, and inventory throughout the facility., • Load and unload incoming and outgoing warehouse items., • Receive and organize incoming orders and materials., • Pick and stage apparel and products according to customer requirements., • Locate and move inventory to designated storage areas, pallets, or crates., • Maintain organized storage areas and ensure products are stored in the appropriate locations., • Transport materials between the warehouse and different areas of the facility., • Secure loads properly before transporting materials., • Inspect products and materials for visible damage, shortages, or quality issues., • Report damaged products, shortages, discrepancies, or other inventory concerns to the appropriate supervisor., • Assist with inventory organization and maintaining accurate stock levels., • Ensure materials are available and properly staged for production and customer orders., • Follow proper warehouse and material-handling procedures., • Maintain a clean, safe, and organized work area using FM Expressions' 6S system., • Communicate professionally and respectfully with coworkers, supervisors, and other departments., • Help identify and resolve warehouse-related challenges and roadblocks., • Follow all forklift and workplace safety procedures., • Perform additional warehouse and production-related duties as assigned.What We're Looking For, • Valid forklift certification., • Previous warehouse or forklift experience preferred., • Strong hand-eye coordination and ability to safely operate material-handling equipment., • Excellent organizational skills and attention to detail., • Ability to follow written and verbal instructions., • Ability to accurately identify products, labels, quantities, and storage locations., • Ability to work independently and as part of a team., • Strong communication and problem-solving skills., • Dependable attendance and a positive attitude., • Ability to work in a fast-paced manufacturing and warehouse environment., • Willingness to adapt to changing operational needs and schedules.Physical Requirements, • Stand and walk for extended periods of time., • Lift, move, load, and place materials weighing up to 50 pounds., • Operate a forklift for extended periods., • Bend, twist, reach overhead and below the knees, pull, push, and perform repetitive movements., • Grasp, turn, and manipulate objects of varying sizes and weights., • Use fine motor skills and hand-eye coordination., • Visually inspect products, equipment, labels, and documentation, including small print., • Work around warehouse and production equipment.Tools & Equipment, • Forklift and other material-handling equipment., • Laptop/computer provided by FM Expressions., • Required Personal Protective Equipment (PPE) provided by FM Expressions.Work Environment FM Expressions facilities are well-lit and well-ventilated. This position works primarily in a warehouse and manufacturing environment and requires extended periods of standing and physical activity. Employees may be exposed to moderate to loud noise, moving mechanical equipment, fumes, chemicals, heat, and cold. Working around large machinery and powered industrial equipment can present hazards, so employees are expected to consistently follow all safety procedures and maintain safe work practices. Why FM Expressions? At FM Expressions, we believe our employees are our greatest asset. We offer: • Competitive pay, • Comprehensive benefits package, • Paid time off and holidays, • 401(k) with company benefits, • Career growth opportunities, • On-the-job training, • Supportive team environment, • Stable, full-time employmentReady to Move Your Career Forward? If you're a safety-conscious forklift operator who enjoys keeping inventory organized and making sure the right materials get to the right place at the right time, apply today and become part of the FM Expressions team! #hc259795

Job DescriptionJob Title: Packing OperatorPosition Summary The Packing Operator is responsible for the safe and efficient operation of automated packaging, palletizing, and wrapping equipment within a manufacturing environment. This position plays a critical role in ensuring finished products are accurately packaged, properly palletized, securely wrapped, and prepared for warehouse storage and shipment. The ideal candidate will have hands-on experience operating automated production equipment, with strong expertise in operating fully automatic palletizers, stretch wrapping systems, and material handling equipment. Essential Duties & ResponsibilitiesAutomated Palletizing & Stretch Wrapping (Primary Responsibilities) • Operate, monitor, and troubleshoot the Chantland-MHS Fully Automatic Palletizer to ensure accurate product stacking, pallet pattern formation, and efficient production flow., • Operate and maintain the Wulftec Fully Automatic Stretch Wrapper, ensuring finished pallets are securely wrapped according to company quality and shipping standards., • Utilize RF scanners to accurately scan finished pallets, track inventory movement, and maintain production and warehouse records., • Perform routine inspections of palletizing and stretch wrapping equipment and identify mechanical or operational concerns., • Clear minor equipment jams and make operational adjustments to maintain production efficiency., • Verify pallet quality, stack integrity, labeling, and wrapping standards before moving product to warehouse staging areas.Packaging Equipment Operation, • Operate and monitor Automatic Open Mouth Bagging Machines to ensure accurate packaging and efficient production flow., • Operate check-weighing systems to verify package weights meet established specifications., • Operate labeling equipment to ensure proper product identification and traceability., • Operate shrink tunnel systems to ensure finished products meet packaging requirements., • Monitor production lines and report equipment malfunctions, product defects, or quality concerns.Material Handling & Warehouse Support, • Safely operate sit-down and/or stand-up forklifts to transport materials and finished pallets throughout the facility., • Remove completed pallets from the palletizer and transport them to designated warehouse locations., • Supply production lines with pallets, packaging materials, labels, and other necessary supplies., • Complete daily forklift inspections and follow all OSHA and company safety procedures., • Maintain an organized, clean, and safe production and warehouse environment.Qualifications & Requirements, • Minimum of 2 years of experience operating automated packaging, palletizing, or manufacturing equipment preferred., • Experience operating automatic palletizers and automated stretch wrapping equipment is strongly preferred., • Experience with Chantland-MHS palletizers, Wulftec stretch wrappers, and RF scanning systems is highly desirable., • Forklift experience is preferred; current forklift certification is a plus but not required., • Ability to operate automatic bagging, weighing, labeling, and packaging machinery., • Strong mechanical aptitude with the ability to troubleshoot minor equipment issues., • Knowledge of manufacturing safety procedures and Good Manufacturing Practices (GMP) preferred., • Ability to accurately complete production records and equipment logs.Physical Requirements, • Ability to stand and walk for extended periods during the shift., • Ability to lift, carry, push, or pull up to 50 pounds., • Ability to bend, reach, twist, climb ladders, and perform repetitive motions., • Ability to work in a fast-paced manufacturing environment around automated machinery, equipment noise, and varying temperatures.Preferred Candidate Profile The successful candidate will be a highly skilled automated packaging operator with strong experience operating fully automatic palletizers, stretch wrapping systems, and RF scanning equipment. Candidates with forklift operating experience and certification are highly desirable but not required. The ideal individual is safety-focused, mechanically inclined, and capable of maintaining efficient product flow from packaging through final pallet preparation and warehouse staging. FULL-TIME/PART-TIME: Full time SALARY: $25.49 AVAILABILITY: Open Availability POSITION: Packing Operator NUMBER OF OPENINGS: 2 LOCATION” Strike Force Staffing- Clifton, NJ

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The Role As a Warehouse Associate, you'll play a key role in delivering the high-quality products our customers know and love. You'll work in a fast-paced environment across production, fulfillment, and material handling areas. The Warehouse Associate position is structured into four levels. Each level with varying responsibilities and opportunities for exposure to different parts of working in a manufacturing facility. We are currently searching for a Warehouse Associate - Level 3 for a Sunday - Wednesday or Wednesday - Saturday shift from 7:00 AM - 5:30 PM. What you'll do Level 3 SS Operator,Inventory Management,Mixing, Koppers Panning, automation heavy lifter, NJ2 You'll take ownership of operating and maintaining key production or material handling equipment. • Audit and verify work completed for accuracy and efficiency, • Manually lift, carry, move, and stage raw materials, ingredients, or finished products, • Maintain product flow by replenishing machines/work stations, • Fill products using equipment and/or tools, such as scoops and scales, for B2B, • Build, stage, load, and unload pallets or deliveries, • Accurately pick and move products following FIFO (First In, First Out) standards, • Meet established production goals, • Maintain cleanliness and organization of work areas, • Follow Good Manufacturing Practices (GMPs) and Standard Operating Procedures (SOPs), • Perform basic equipment setup, cleaning, and assembly, • Troubleshoot and report issues that may impact productivity, • Other duties as assigned Physical Requirements: Lift/carry up to 50 lbs throughout shift, push/pull, squat/bend, stand up to 10 hrs a day on average. Safely work at heights of up to 40 feet. What you'll bring • Ability to work full-time, day or night shifts (varies based on business needs), • Comfort working in a facility that handles allergens (peanuts, treenuts, milk, wheat, eggs, sesame, soy, shellfish, fish), • Strong attention to detail, sense of urgency, and accountability, • Reliable attendance/punctuality and proactive communication, • Able to consistently lift up to 50 lbs through a full shift, • Able to on average to stand/walk 10 hours at a time with additional movements such as pushing, pulling, squatting, bending, and/or reaching, • Extremely detail-oriented, • Excellent work ethic, always on time, and very reliable, • Able to communicate respectfully, effectively, and professionally with peers and managers, • High school diploma, or its equivalent, or 2+ years' experience in a warehouse or food production environment What we offer • A challenging role in a rapidly evolving business, • Hourly rate of $17.25 - $17.75, depending on experience, • Temporary position is entitled to paid sick leave as per the NJ Earned Sick Leave only, • A casual work environment (jeans and sneakers are A-O-K!), • A phenomenal employee discount EEO STATEMENT Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

Job DescriptionQC / Packaging Operator – 2nd Shift$25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-HireLocation: Carlstadt, NJ Job Type: Full-Time, Temp-to-Hire Shift: 2nd Shift Pay: Starting at $25.00/hour Job Description We are currently hiring an experienced QC / Packaging Operator for our client, a manufacturing company located in Carlstadt, NJ. The QC / Packaging Operator will be responsible for performing final quality checks and packaging finished wood doors prior to shipment. The right candidate will have strong attention to detail, experience operating packaging equipment, and the ability to work efficiently in a fast-paced production environment. Responsibilities • Operate the plastic/bubble wrap packaging machine to protect finished doors., • Read and interpret job tickets and production paperwork., • Perform final quality inspections for finish, dimensions, and defects., • Verify product count, sizing, and order accuracy., • Identify and report defective or non-conforming products before packaging., • Label and stage packaged doors for shipment., • Monitor packaging materials and notify the Supervisor when supplies are low., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality procedures., • Maintain production pace and meet shipping requirements.Requirements, • 3+ years of experience operating a plastic/bubble wrap packaging machine required., • Manufacturing or production experience preferred., • Ability to read and understand job tickets and production paperwork., • Strong attention to detail and quality-control skills., • Basic math skills for measurements and counting., • Ability to work in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work well independently and as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move finished doors up to 75 lbs. with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Job DescriptionJob Title: Packaging Operator Location: East Hanover, NJ Job Type: Long-Term Contract Pay Rate: $25.00 per hour Work Model: Onsite Schedule: 2nd Shift, 3:00 PM – 11:30 PM Overtime: Heavy overtime required; may include 1–2 additional hours per day and occasional Saturdays Position Overview We are seeking a reliable and safety-conscious Packaging Operator to support packaging operations in a high-hazard manufacturing environment. The ideal candidate will have 1–3 years of relevant work experience, a strong commitment to safety, and the ability to work a rotating/extended shift schedule with significant overtime. Responsibilities • Perform packaging operations according to customer orders and production requirements., • Operate packaging machinery safely and efficiently to meet production goals., • Monitor equipment to ensure machinery is operating properly and safely., • Perform minor repairs and basic troubleshooting of packaging equipment., • Safely handle hazardous and non-hazardous materials in accordance with plant procedures and environmental regulations., • Stock and maintain packaging materials, including pallets, slip sheets, tape, labels, trash boxes, ties, and other supplies., • Maintain a clean and orderly work area through routine housekeeping., • Follow all company requirements related to safety, health, environmental compliance, and ethical conduct., • Meet and maintain production, quality, and equipment performance standards., • Support and participate in Continuous Improvement initiatives. Requirements, • High school diploma or GED required., • 1–3 years of relevant work experience preferred., • Ability and willingness to work rotating/extended shifts, including 12-hour shifts as required., • Ability and willingness to work significant overtime, including weekends, holidays, and short-notice call-ins when needed., • Ability and willingness to wear required PPE, including steel-toe footwear, hard hat, protective eyewear, face shields, arc-rated protective clothing, and SCBA (Self-Contained Breathing Apparatus)., • Comfortable working in a high-hazard process environment., • Ability to safely lift up to 50 pounds., • Ability to climb stairs, ladders, and columns as required., • Ability to stand, walk, stoop, bend, kneel, crawl, and reach overhead for extended periods., • Ability to hear and respond appropriately to alarms and other safety signals., • Sufficient visual acuity to perform close work safely and accurately., • Strong commitment to workplace safety and following established procedures. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Join Weiss-Aug A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. We're currently seeking a passionate and skilled Machine Operator- Stamping to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you will be responsible for assist with daily press room activities during the production run. Responsibilities: • Change and set up production reel., • Rewind production reels., • Edit reels for Quantity, Quality, etc., • Rewind interliner., • Change production totes., • Maintain clean work area., • Maintain Lot Control ticket system., • During production run, maintain sample submission to Q.C. according to Routing., • Coordinate packaging material requirements between Press Room and Warehouse., • Perform required visual checks to verify quality of product., • During production run perform gauging verification (Go No Go gauges)., • Interface with Die Setter and Q. C. providing support functions., • Operate Power Press according to Weiss-Aug Co. Inc. standards. Requirements: • High School Diploma or equivalent., • Fluent in English., • Ability to read precision measuring instruments and conduct basic arithmetic calculations., • Must be able to lift 50lbs, • Must be able to stand for long periods to time This position is at our East Hanover, NJ location. Pay Range: $18.50 per hour Other Benefits Include: • Medical, Dental and Vision, • 401 (k) with company match, • Holiday, Vacation and Sick Time, • Tuition Reimbursement, • Health Savings Accounts (HAS), • Flexible Spending Accounts (FSA), • Cigna Wellness Incentive Program, • Employee Assistance Program (EAP), • Short Term Disability, • Group Life and Accidental Insurance, • Sun Life Accident, Critical Illness, and Hospital Indemnity Insurance, • Smoking Cessation Program, • Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

A Production Operator is responsible for operating and maintaining equipment in the manufacturing plant as well as preparing items for distribution. The position involves sanitation of equipment, assembling and checking product, and ensuring that all machinery runs smoothly. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience and/or ability required. Job Responsibilities: • Responsible for maintaining production equipment., • Responsible for shift change overs., • Maintain a clean production area., • Load and unload items from machines, carts, and dollies., • Feed or place supplies onto equipment for processing., • Responsible for quality control of items produced., • Provide packaging duties, as required., • Work in a fast-paced environment., • Provide high standards of production are met., • Inspect final products to assess compliance with quality standards and establish tolerances., • Set up and adjust machines for day-to-day operations., • Monitor machinery in operation to identify concerns and make corrections or report complex problems., • Demonstrate effective communication skills through positive interactions with site managers, outside contractors, and junior on-site staff., • All other duties, as required or needed. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to talk or hear and see. The employee frequently is required to stand; walk; use hands to handle or feel and reach with hands and arms. The employee must regularly lift and/or move objects up to 50 pounds. Job Requirements: • HSD or equivalent, • Ability to pay attention to details., • Ability to stand for entire shift., • Ability to work long hours., • Ability to multi-task Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Purpose: To operate production machinery safely and efficiently; maintain appropriate documentation and communicate ideas and problems to appropriate staff; perform scheduled preventative maintenance and other repairs to production equipment; participate in production equipment changeovers; responsible for producing best quality product. Safety: Follow all employer safety and health regulations as required by company policies, procedures and practices. Ensure the safe and efficient operation of all downstream equipment to meet or exceed company established safety culture. Follow Lock out/Block Out/Tag out policy. Wear proper Personal Protective Equipment (PPE) where required. Proactive in addressing unsafe conditions and confronting unsafe behaviors in the facility. Address all unsafe acts or conditions immediately and report to Shift Production Supervisor. Participate and/or conduct safety training as scheduled. Daily Operations: Monitor and explain deviation from expected Overall Equipment Effectiveness (OEE). Complete any machine and task specific training as documented on Operator Development Plan. Perform necessary Operator Checklists. Perform data collection of quality measurements as directed. Correct any deviations from quality standards in order to produce product within specifications. Monitor and respond accordingly to any deviations within SPC charting. Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. Perform maintenance tasks as outlined by Maintenance Manager and in response to machine malfunctions. Troubleshoot machine and process issues. Responsible for personal development by establishing SMART goals, requesting regular meetings with their managers, volunteering for plant improvement teams, requesting additional training, requesting involvement beyond their immediate job responsibilities, seeking higher education opportunities including continuing education classes and meeting or exceeding their self-development and performance goals. Provide suggestions for training topics. Promote and participate in good housekeeping habits to ensure plant appearance exceeds management and customer expectations. Ensure all daily, weekly and periodic cleaning tasks are performed as outlined in the Master Cleaning Schedule. Maintain accurate production reporting documentation. Responsible for active participation on plant teams and activities including safety, quality, sustainability, community involvement, OEE, maintenance, employee wellness, brainstorming and continuous improvement which are required to create and maintain a World Class environment. Operate Powered Industrial Truck, Boom Lift and Scissor Lift per OSHA regulations rules and guidelines. Quality/GMP/Food Safety: Responsible for producing and/or packing the best quality product at all times which meet or exceed company expectations and customer quality expectations. Ensure all production is properly labeled and/or tagged. Ensure all quality checks are properly completed and recorded in the Quality Monitor software or a plant specific form at the scheduled intervals. Ensure all non-conforming products are placed on hold with proper hold protocol is completed. Ensure all raw material lot numbers are properly obtained and recorded as required. Follow all Good Manufacturing Practices (GMP). Perform line sanitization tasks as outlined in the Master Sanitization Schedule and according to company procedures. Responsible for reporting quality, food safety, GMP, and food defense issues to their supervisor or a member of management. Preventive Maintenance: Perform scheduled production equipment changeovers as outlined by the plant production schedule. Perform changeovers with limited impact to OEE. Perform scheduled Preventative Maintenance tasks as outlined by the plant PM program. Manage preventative maintenance tasks in Computerized Maintenance Management Software, as directed, including generating work orders. Proactive in addressing machine inefficiencies during preventative maintenance. Ensure equipment is clean and in 'showroom condition' after preventative maintenance is performed on production equipment. Continually evaluate equipment for improvement areas. Tag components or parts that need repair, replacement or improvement. Ensure production equipment is in safe and efficient operation after each changeover. Record parts removed from inventory on appropriate documentation and Computerized Maintenance Management Software to maintain sufficient parts inventory. Notify Maintenance Manager when parts inventory becomes low or reaches a reorder point. Experience, Educational and Technical Qualifications: Our Operator should possess a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business. Our Operator may be required to act as Person In Charge in the absence of a member of management. Our Operator must possess a High School diploma or GED equivalent and successfully complete the entrance examinations and interviews. Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information. Pay Range: $18.95 - $27.90

The Shift Supervisor leads the safe, compliant, and efficient operation of a heavy industrial power-generation and resource-recovery facility during an assigned shift. This position supervises plant personnel and oversees high-pressure boilers, turbines, steam-generation systems, electric-generating equipment, instrumentation, control systems, and supporting plant equipment. This role offers experienced operations leaders the opportunity to direct critical plant operations, develop a cross-trained workforce, and make an immediate impact on safety, environmental compliance, reliability, and power-generation performance. Shift Supervisors gain broad operating responsibility, lead technically skilled employees, and build experience supporting long-term advancement within plant operations leadership. Reporting to the Operations Manager, the Shift Supervisor conducts plant rounds, coordinates operations and maintenance personnel, and ensures compliance with safety procedures, environmental permits, regulatory requirements, and state operating-license standards. During emergencies, equipment failures, or abnormal operating conditions, the Shift Supervisor directs or personally performs the actions required to protect employees and equipment and restore safe, stable plant operation. Key Responsibilities: • Maintain a safe working environment and ensure compliance with all company policies, procedures, and safety protocols., • Keep plant operations within all environmental limits, permits, and regulatory requirements., • Supervise the operation of high-pressure boilers, turbines, steam-generation systems, electric-generating equipment, instrumentation, control systems, and supporting equipment., • Conduct regular plant rounds and monitor operating conditions, equipment performance, and personnel activities., • Respond to injuries, accidents, equipment failures, operational emergencies, and abnormal plant conditions., • Direct personnel and, when necessary, personally perform required operational actions to restore safe operation., • Approve equipment clearances and lockout/tagout procedures and issue safety permits., • Troubleshoot plant operational issues and coordinate preventive and corrective maintenance activities., • Maximize facility performance, reliability, operating efficiency, and equipment availability., • Direct completion of shift, daily, weekly, and monthly inspections, checks, and housekeeping activities., • Lead projects assigned by the Operations Manager., • Train, mentor, and develop shift personnel to build a motivated, cross-trained, and technically capable workforce., • Ensure the ongoing technical training and development of operations personnel., • Maintain all required site-specific and state-mandated licenses and certifications. Requirements: • Three or more years of supervisory experience in a heavy industrial or manufacturing environment., • Active New Jersey Operating Engineer or Boiler Operator license, including a Black Seal, Blue Seal, Red Seal, or an equivalent license appropriate for the facility's equipment., • Hands-on experience with high-pressure boilers and electric-generating equipment., • Detailed knowledge of steam-generating power plant operations, instrumentation, and control systems., • Power-generation or resource-recovery experience preferred., • High school diploma or GED required; Bachelor of Science degree preferred., • Ability to work rotating day and night shifts, including weekends, holidays, outage periods, overtime, and vacation coverage. Physical Requirements: • Ability to walk, stand, sit, and climb ladders and stairs., • Ability to lift and carry up to 50 pounds., • Ability to work at heights and in confined spaces., • Ability to qualify for and wear a full-face respirator., • Ability to work indoors and outdoors in varying weather and operating conditions. All Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. Pay Transparency: Reworld is committed to paying its staff equitably, and we strive to provide competitive compensation and benefits packages. The range below reflects Reworld's reasonable estimate of base pay for this role based on primary posting location. It is expected that most qualified candidates in this location will fall within the posting range. The final salary offered for this role will be determined based on factors including, but not limited to: experience, education, geographic location, skills and competencies, travel requirements and/or union contracts (if applicable). Pay ranges are reviewed from time to time and may be modified in the future. The pay range for the primary location of this position is: $118,700.00 - $169,800.00 USD per annum Our DEI Commitment: Reworld is an Equal Opportunity Employer, has developed an Affirmative Action Program (AAP), and will not discriminate against any qualified applicants because of race, color, religion, sex, national origin, sexual orientation, gender identity, disability (including perceived disability, physical, mental, and/or intellectual disabilities), veteran status, liability for service in the Armed Forces of the United States, or any other characteristic protected by law.