Trabajos measurement en Plainview, New YorkCrear alertas

Job Description KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a part-time (20-hours per week) Treatment Plant Operator located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. Benefits: • Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match., • Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements., • Perform instrument calibration/measurement/data recording for operating parameters., • Collect process samples to be shipped for laboratory analysis., • Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required., • Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously., • Perform/oversee routine site maintenance including limited mowing and snow removal., • Treat water generating from construction dewatering events., • Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications., • Prepare daily reports to be emailed to the Project Manager., • Prepare monthly reports including discharge monitoring reports, • Oversee onsite activities to monitor compliance with building and safety regulations., • Select tools, materials and equipment and track inventory., • Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance., • Prepare internal reports pertaining to job status., • Oversee subcontractors, • Familiarity/experience with operation/control of:, • Remote recovery wells, • Air Stripping, • Bag Filtration, • GAC filtration, • Advance oxidation process (AOP), • Minimum of 5 years of related experience and/or training., • Licensed Wastewater Treatment Plant Operator., • OSHA 40 hr HAZWOPER Training preferred., • Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components., • Ability to work in the field on hazardous waste sites., • Must be able to occasionally lift and /or move up to 50 pounds., • Must be a US citizen and can obtain security clearance/badges for access to secure military installations., • Must possess valid US driver’s license and good driving record. As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire. Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i) KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories.

Job Description CNC Machinist – First Class Location: Farmingdale, NY Company: Superior Motion Controls Position Summary: Superior Motion Controls is seeking a First-Class CNC Machinist to join our precision-driven metal manufacturing team. This role is ideal for a seasoned professional who thrives in a fast-paced, quality-focused environment and brings deep expertise in the setup, operation, and optimization of CNC machining centers. Primary Responsibilities: • Set up, program, and operate vertical CNC machining centers to produce precision components per engineering specifications and drawings., • Read and interpret complex blueprints, GD&T specifications, and setup sheets with minimal supervision., • Perform first-piece inspections and make machine adjustments to ensure adherence to tight tolerances., • Select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality., • Conduct routine maintenance and troubleshooting of equipment to ensure optimal machine performance., • Maintain documentation and records for production runs, tool usage, and machine setup parameters., • Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Qualifications and Experience: • Minimum 10 years of continuous hands-on experience in a CNC machining environment, with demonstrated expertise in setup and operation., • Proficient in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators., • Strong understanding of metal material properties (e.g., aluminum, steel, inconel, tool steel) and cutting tool technology., • Demonstrated ability to work independently with minimal oversight while consistently delivering high-quality results., • Ability to sit/stand at a CNC workstation for extended periods., • Capability to lift up to 40 lbs as needed., • Must be physically able to navigate the warehouse and access inventory at various heights.

Job Purpose • Troubleshoots repairs and maintains a wide variety of Compounding, Packaging and Facilities equipment, including but not limited to mixing kettles, washers, mills, pumps, tube fillers, bottle fillers, cartoners, over-wrappers, labelers, induction sealers, robotic case packers, laser printers and aggregation labeling, inspection, printers, and data management., • Supports and assists in the installation and qualification of new equipment and controls; supports facilities systems and services as required. Develops low to mid-level upgrades improvements in support of operational improvements and CAPAs. Major Accountabilities • First responder, troubleshoot, diagnose, and repair advanced electrical equipment problems with little or no supervision in all areas of the facility, documenting repairs in Maintenance and Repair Logs as per cGMP guidelines., • Perform and document scheduled routine preventative maintenance on electrical systems as required, • Communicates and works with Mechanics and Facilities Maintenance associates to resolve cross-over issues, • Support creation, management of recipes, system access, user management and other data in non-network process equipment, • Backup of electronic records, system files, and operating systems. Assist with review, investigation and inspection of local machine data, system configuration management, version control and retention of PLC and HMI software, • Maintains inventory of routinely used parts and supplies., • Works with automation and project engineers to support deliverables, installation and qualification for new equipment and technologies, • Assemble and install electrical equipment modifications, upgrades, and improvements as directed by engineering personnel, • Plan and execute level upgrades in support of equipment improvements and CAPAs, • Execute validation dry runs to identify inconsistencies in protocols; supports the execution of IQ and OQ protocols on new equipment and equipment modifications, • Manages small-size and mid-size automation projects, including generating documentation, coordination of resources from start to finish. Research and identify “Functionally Equivalent” components for replacement of obsolete and unavailable components, • Provides necessary information for appropriate documentation of functionally equivalent components, • Adheres to all applicable procedures, cGMP’s, company policies, and all other quality or regulatory requirements (OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.), • Ensures all work is performed in a safe, effective manner, and in compliance with the appropriate industry and regulatory (FDA, DEA,OSHA) standards, and Departmental, Plant, and corporate quality and Behavioral Based Safety (BBS) goals. Note: This position may require the labeling, packaging, or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHA’s HAZWOPER standard,29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR265.16.All employees that have received the above-mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. To perform this job successfully, an individual must have satisfactory visual acuity and color perception. Visual acuity and color blindness screenings may be used to screen applicants. • Satisfactory visual acuity means at least 20/20 vision, corrected or uncorrected., • Satisfactory color vision means ability to recognize traffic signals and devices showing the standard red, green, and amber traffic signals Key Performance Indicators • Strong AutoCAD and or Microsoft Visio skills for generating controls drawings. Microsoft Office Skills (Word and Excel), • Must be able to read, understand and work from electrical schematics and engineering documents., • In depth knowledge and understanding of PLCs, ladder logic and other PLC languages for troubleshooting and maintenance purposes. HMI programming and troubleshooting capabilities., • In depth knowledge and understanding of runtime and PC based HIMs for troubleshooting and maintenance purposes, • Proficient in the use of test and measurement equipment including but not limited to Digital Multi-Meter, Process Meter, Temperature measurement, Tachometer and Oscilloscope., • Must be able to use a variety of power and hand tools for troubleshooting, repair and installation of electrical, electronic, and electro-mechanical components., • Ability to quickly learn and adapt to new technology and identify functionally equivalent replacement for obsolete technology., • Understanding of AC and DC Motor controls with capability to install and optimize parameter settings., • Fluent in English good communications skills both verbal and written, ability to read and understand SOPs and all forms of training materials., • Mathematics Skills–Good basic math skills needed to apply electrical formulas., • Available for overtime when needed. Availability for emergency telephone support and call in rotation, • Must be able to climb ladders and stairs, work in and through construction areas and lift 50pounds. Ideal Background and Education • H.S. Diploma, A.S., or 4-year Electrical Engineering professional certificate or degree