Measurement jobs in Buffalo, New YorkCreate job alerts

Job Description Join Kistler – A Global Leader in Measurement Technology! Kistler is the global leader in dynamic measurement technology for measuring pressure, force, torque, and acceleration. Cutting-edge technologies provide the basis for Kistler's modular solutions. Customers in industry and science benefit from Kistler's experience as a development partner, enabling them to optimize their products and processes so as to secure a sustainable competitive edge. The owner-managed Swiss company's unique sensor technology plays a key role in the evolution of automobile development and industrial automation. Kistler is making an important contribution to the further development electrified drive technology, automated and connected driving, emission reduction and smart factories. Our Buffalo location focuses on Piezoelectric, Piezoresistive, & MEMS Sensors, electronics, and instruments. Purpose of the Position This position is responsible for managing documents, equipment, tooling, and fixturing required to manufacture the diverse portfolio of products made by Kistler Instrument Corp. (KIC) Production Facility. The manufacturing engineer develops and troubleshoots manufacturing processes in order to improve product quality, cost, and/or lead-time. This includes investigation and proposal of new production equipment, process procedures, and methods to automate, improve, and/or scale-up new and existing processes. Main Tasks • Provides technical support and improve manufacturing lines by specifying and/or refining BOMs, routings, work instructions, and test procedures., • Design, document, procure, qualify, implement, and improve fixtures, tools and equipment., • Provides documentation and training on assembly methods, test procedures, and production equipment., • Troubleshoots day-to-day process performance issues, develop solutions, and monitor improvements., • Works closely with R&D engineering, quality, purchasing, and planning to ensure products meet specified requirements., • Analyze and plan work force utilization, space requirements, and workflow. Design layouts of equipment and workspaces in conjunction with Kistler’s Lean Initiatives for maximum production efficiency., • Collaborates with R&D engineering design staff to develop manufacturing methods for new products., • Responsible for change management and implementation for changes to manufacturing processes., • Identify and lead continuous improvement efforts using Lean and Six Sigma tools to optimize production operations., • Performs other duties as assigned., • Bachelor’s degree (B.S.) from a four-year technical or engineering college or university and a minimum of 2-5 years’ related experience or equivalent of education and experience., • Strong communication, interpersonal, and teamwork skills., • Able to manage multiple projects and prioritize work appropriately to meet commitments., • Demonstrated proficiency in Microsoft Word, PowerPoint, Outlook, and Excel., • Experience with ERP/MRP systems (SAP preferred) relevant to manufacturing operations., • Experience with engineering change systems., • Ability to interpret and create (Solidworks preferred) complex technical drawings, schematics, and specifications., • Experience with LabVIEW or TestStand a plus. At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: Medical, dental, vision, life, and disability coverage 401(k) plan with a 4% company match Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job DescriptionAbout Lyra Lyra Health is the leading provider of mental health solutions for employers supporting more than 20 million people globally. The company has published more than 20 peer-reviewed studies, and delivered unmatched outcomes in terms of access, clinical effectiveness and cost efficiency. Extensive peer-reviewed research confirms Lyra’s transformative care model helps people recover twice as fast and results in a 26% annual reduction in overall healthcare claims costs. Lyra is transforming access to life-changing mental health care through Lyra Empower, the only fully integrated, AI-powered platform combining the highest-quality care and technology solutions. About the Opportunity Lyra’s provider network is composed of in-person and virtual therapists, physicians, and coaches across the US. With our advanced matching technology, supportive provider platform, and opportunities for training and clinical consultation, being part of our network is an incredible chance to do what you love (like client care) with support for the things you don’t love (like self promotion and scheduling). This opportunity is a great fit if you’re an independently licensed clinical therapist interested in providing culturally responsive, evidence-based therapy for children, adults, couples, and/or families. We encourage clinicians to apply who have experience with caseloads that include a comprehensive spectrum of mental health needs, from milder presentations to more complex and severe support. This opportunity is a great fit for providers seeking well-matched and motivated clients, administrative and marketing support, and easy invoicing with quick payments. The ability to work with clients in person through your private or group practice is strongly preferred. We are looking for clinicians who are able to work with clients in these locations: Albany, Buffalo, RochesterRequirements: • Master’s or doctoral degree from a clinical track (e.g., MSW, MFT, MC, MMHC, PhD, PsyD), • Unrestricted LCSW, LMFT, LPC, PsyD, PhD, or equivalent license (i.e., able to work independently, without supervision from a licensed supervisor) without current, past, or pending disciplinary action, • Experience and commitment to providing evidence-based treatments (e.g., ACT, CBT, CPT, DBT) and clinical best practices (e.g., measurement based care, promoting skills practice), • Ability to provide care to children, adults, couples, and/or families with a strong preference for in-person care delivery, • Must have office space with ability to see clients in New York area, • Experience managing risk and responding to clinical crises, as needed, • Full-time resident of the United StatesHere are some of the advantages to joining the Lyra provider network:, • Connect with highly compatible clients thanks to Lyra’s powerful matching algorithm technology, • Set your own schedule, without a minimum hours requirement, • Let Lyra clients easily book appointments with the Lyra Calendar feature, which seamlessly integrates with your calendar, • Focus less on the administrative burden of billing with Lyra’s paperless billing and quick payment turnaround, • Access Lyra’s experienced clinical consultations team to get rapid support with your Lyra clients as well as access a range of specialty group consultation meetings, • Have peace of mind with Lyra’s 24/7 Care Navigation team for crisis support, • Upskill your knowledgebase with access to Lyra’s large collection of free and relevant CE credited courses approved by APA, ASWB, and NBCC, • Stay in the know with monthly newsletters and robust Help Center resources just for Lyra providers

Job Description Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Complete shop order documentation, time sheets, and necessary reports. Requirements: • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Willingness to work 2nd shift (3:30 PM–Midnight) and overtime as needed. Preferred Skills / Qualifications • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Ability to work independently and as part of a team on 2nd shift.Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description As Resource Label Group Healthcare continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee centric, collaborative culture that is technology driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients. We are currently recruiting for a 2nd Shift Flexo Press Operator to join our team! The 2nd Shift Flexo Press Operator is responsible for setting up and operating the printing press to produce labels and related products. This position offers onsite training and the opportunity to learn a valuable skilled trade in the printing industry. Employees will have unlimited growth potential and the chance to continuously advance your career. Previous printing experience in a manufacturing setting is a huge plus. This position reports to the Pressroom Manager. Pay Rate: $21.50-$29.00/hour for an Experienced Flexo Press Operator plus $1.00/hour shift differential Schedule: 2nd shift, Monday-Thursday, 2:30PM-1:00AM, with occasional overtime Responsibilities: • Reads job order and loads dies into press, installs print cylinder on shaft and installs print cylinder in press., • Fills ink pans, screens and pumps with prescribed inks., • Starts press, adjusting speed and alignment of stock to the print cylinder as necessary, • Engages print cylinders; adjusts printing impression as necessary, places print cylinders lead-to-lead and runs down approval strip, • Cuts sample of approval strip from printed roll, inspects for imperfections such as print to print out of register, print to die out of register, missing impression, ink starvation or color adjustments, making adjustments as necessary, • Cleans plates, print cylinders and dies as needed, performs daily, weekly and monthly maintenance as required, • Mixes inks to produce and maintain desired colors and viscosity, • Keeps work areas clear and organized; maintains housekeeping standards Key Characteristics That We Are Looking For: * Mechanical Aptitude: Able to understand and apply mechanical concepts effectively, has solid and sound knowledge of equipment, tools, programs, and systems, follows safety protocols and procedures, and works confidently and safely in a manufacturing setting * Teamwork and Cooperation: Acts as a team player that balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. * Problem Solving: Identifies and resolves problems in a timely manner, gathers and analyzes information, develops alternative solutions, and uses reason when handling a variety of situations * Ability to multitask: Able to complete multiple tasks effectively at once in a safe and productive manner • High school diploma or general education degree (GED); and a minimum of three years related experience and/or training; or equivalent combination of education and experience, • At least 1 year of narrow-web Flexo printing experience required Flexo press, narrow-web printing, flexible packaging, screen printing, and/or label printing/packaging experience, preferred • Multi-color printing experience, • Experience with color matching, die cutting, plate mounting, and conducting changeovers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals Must be able to read and interpret ruler, scales and other measurement devices • Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus Work Environment: * The work environment characteristics described are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Primarily works in a manufacturing setting , which contains equipment and machinery that can be noisy and hazardous * Is frequently exposed to moving mechanical parts * Is occasionally exposed to chemicals, some of which could be hazardous * Noise level is usually moderate Physical Demands: * The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regularly required to stand, talk, and hear, • Occasionally required to walk, and use hands to handle or feel As Resource Label Group continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee-centric, collaborative culture that is technology-driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients.At Resource Label Group, we are a full-service manufacturer of custom label design and printing for a wide range of industries. With full-scale capabilities coast-to-coast and 33+ locations across North America, we are dedicated to delivering cutting-edge label printing with a national reach and local touch.\r\n\r\nAs Resource Label Group continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee-centric, collaborative culture that is technology-driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients.

Job Description Join Kistler – A Global Leader in Measurement Technology! At Kistler, we’re revolutionizing industries with our cutting-edge dynamic measurement technology, helping customers optimize products and processes. From automobile development to smart factories, our Swiss-designed sensor solutions are driving the future of electrified drive technology, industrial automation, and emission reduction. Purpose of the Position We are seeking a Vice President of Operations and Engineering to lead our North American production, engineering, and logistics footprint. This leader will drive our localization strategy, concentrating manufacturing and engineering to serve our key regional focus markets, which include MedTech, Aerospace and Defense, Infrastructure, and Automotive Production. The role will build operational excellence across our footprint, deliver strong connection to customers, and ensure scalable capacity as the market grows. Main Tasks • Lead the implementation of the localization strategy, focusing production and engineering for North American focus markets., • Oversee Operations, including logistics, planning, purchasing, assembly and the machine shop., • Provide strategic and operational leadership for Engineering, including Custom Product Engineering, Application Engineering, and R&D interfaces., • Ensure organizational structure, processes, and capabilities are in place to support full lifecycle engineering from requirements gathering and feasibility analysis to design, validation, release, and production ramp-up., • Take ownership for the Custom Product Engineering organization, including technical content responsibility, decision authority on engineering concepts, and overall delivery quality., • Lead Quality Management and Assurance as part of Operations, including compliance systems, audits, and continuous improvement., • Ensure adherence to AS9100D, ISO 9001, and ISO 17025., • Manage production and engineering KPIs, such as productive hours, delivery reliability, throughput, scrap rate, and on-time launch of development and improvement projects., • Establish performance dashboards and drive data-based decisions using Celonis, Power BI, and other analytics tools., • Provide strong, presence-based leadership at the Amherst site, fostering a culture of accountability, teamwork, safety, and continuous improvement., • Collaborate closely with Sales Directors and the General Manager to maintain proximity to customers and align operations with commercial priorities., • Represent Operations and Engineering during customer meetings, audits, and site visits., • Develop and manage capital investment plans for production assets, engineering equipment, and process capabilities., • Maintain functional alignment with corporate platform leaders in Engineering and Production., • Ensure seamless cross-functional collaboration between Engineering, Production, Sales, Quality, and Product Management to enable customer-centric, technically sound solutions., • Lead and develop teams in accordance with Kistler leadership principles, ensuring talent development, succession planning, and retention. Requirements Profile • Experienced Operations and Engineering leader with a successful track record in complex industrial or high-precision environments., • Twelve or more years of progressive leadership experience in manufacturing, operations, or engineering; experience in MedTech, Aerospace and Defense, Infrastructure, or Automotive Production is highly valued., • Proven leadership of engineering organizations, including responsibility for product engineering, design, customization, and technical decision-making., • Hands-on leadership style, comfortable engaging directly with teams on the shop floor, in labs, and across operations., • Strong understanding of ERP and manufacturing execution systems; SAP experience strongly preferred., • Skilled in lean manufacturing, digital operations, capacity planning, and cross-functional coordination., • Demonstrated success in budget management, capital investment planning, and asset utilization., • Excellent communication, stakeholder engagement, and decision-making skills., • Commitment to continuous improvement and operational excellence., • Willingness to travel occasionally to Novi, MI, and other sites. Why Kistler? At Kistler, we value your expertise and offer opportunities for professional growth in a global environment. Our competitive benefits package includes: • Medical, dental, vision, life, and disability coverage, • 401(k) plan with a 4% company match, • Generous personal and vacation time Join a team that’s shaping the future of measurement technology. We look forward to meeting you! Kistler Instrument Corporation is an Equal Opportunity Employer.

Job Description Hohl Industrial Services is currently seeking a Structural Detailer to assist our Fabrication team in the daily activities of the detailing department to create shop fabrication & erection drawings in accordance with contract requirements. Responsibilities: • Using a 3D drafting software (Tekla Structures), develops Assembly or layout drawings for large structural steel projects for approval., • Communicate with the Project Manager during the development of the approval drawing to ensure customers' objectives are being met with the proposed design., • Submits Request for Information (RFI's) to the Project Manager for resolution when required., • Responsible on a functional level to the Project Manager responsible for the project to whom he/she is currently assigned., • Receives directions from the Project Manager as to the overall technical requirements and scope of each project., • Conducts field measurement of existing equipment and building details where required to interface or interconnect with the new equipment or structure, with assistance of field personnel where required., • Communicates and attends meetings with the customer, as required for clarity of direction in meeting the customer's project objectives., • Revises approval drawings as required by customer's comments, with approval of the Project Manager., • Upon return of approval drawings to Hohl Industrial, develops all mechanical, structural, pneumatic, hydraulic, and piping details necessary for completion of the shop drawings, using standard Hohl formats for mechanical equipment and structural steel, AWS weld symbols, ANSI pneumatic and hydraulic symbols, or the customer's standard formats as directed by the Project Manager., • Issues cutting lists and drawings to the Shop Foreman, with approval of the Project Manager, using the appropriate Release Form., • Issues drawings to the Project Manager to be used by field personnel., • Answers questions from Shop Foremen, Shop employees and Hohl field Foremen and Field Project Managers regarding drawing issues., • Maintains a record of all drawings currently in the shop, marked-up to indicate as-built changes. Modifies drawings for prior to closing job., • Issues final steel erection and equipment drawings to the Project Manager for record., • Provides concept drawings for inclusion with quotations., • Complete design, detail and coordination responsibility for small shop fabrication jobs, • All other duties assigned. Qualifications: • High School Diploma or equivalent (GED)., • 3-5 years of experience using 3D drafting software., • Prefer experience with Tekla Structures., • 3-5 years of experience detailing structural steel., • Experience with AISC/AWS drawing and detailing standards., • Experience in producing shop and erection drawings for projects typical to the industry., • Completion of the AISC/NSID Steel Detailing Course is preferred, but not mandatory., • Knowledge of AISC Code of Standard Practice for Steel Building and Bridges preferred but not required., • Knowledge of AWS welding codes including D1.1, D1.5, D1.6, and D1.2., • Basic knowledge of NDE methods including MT, PT, UT, & RT., • Basic welding process knowledge FCAW, GMAW, GMAW-S, SAW, & SMAW., • Proficient with Microsoft Office Applications., • Eagerness to learn and grow within the industrial construction sector. Who we are: Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full-service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Hohl Industrial Services is a certified AISC fabricator and erector. Additionally we maintain CWB, NYDOT, ODOT, AWS, ASME and ISO certifications We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, or any other characteristic protected by law Job Posted by ApplicantPro

Job Description As RLG Healthcare continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee centric, collaborative culture that is technology driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients. We are currently recruiting for a 1st Shift Maintenance, Repair, and Operations Technician Assistant to join our team! The 1st Shift Maintenance, Repair, and Operations Technician Assistant is responsible for assisting our Maintenance, Repair, and Operations Technician with performing the maintenance, repair, and safe operations of all facilities and machinery in the plant, and for working as a press assistant. This position offers onsite training and the opportunity to learn a valuable skilled trade in the printing industry. Employees will have unlimited growth potential and the chance to continuously advance your career. Previous printing experience in a manufacturing setting is a huge plus. This position reports to the Senior Operations Manager. Pay Rate: $22.00-$24.00/hour Schedule: 1st shift, Monday-Friday, 6:30AM-3:00PM, with occasional overtime Responsibilities: • Assists the Maintenance, Repair, and Operations Technician with managing scheduled and emergency maintenance and repair work to facilities and equipment., • Helps maintain equipment maintenance and cleaning logs in the Enterprise Resource Planning (ERP) system, • Helps generate purchase orders for needed supplies and follows up on invoices as necessary, • Helps conduct visual inspections of building, grounds, facilities, equipment, and projects as needed, • Learns from facilities-oriented failures and works as part of the maintenance team to develop solutions to bring to management, • Helps keep track of inventory of supplies and material necessary for the operation of the building and equipment maintenance, • Assists with identifying workplace hazards that exist or could develop, as well as with correcting problems, • Keeps work areas clear and organized; maintains housekeeping standards, • Performs other duties (including learn how to be a press assistant) as requested Key Characteristics That We Are Looking For: • Strong Sense of Mechanical Aptitude and Technical Knowledge: Able to understand and apply mechanical concepts effectively, has solid and sound knowledge of equipment, tools, programs, and systems, follows safety protocols and procedures, and works confidently and safely in a manufacturing setting, • Teamwork and Cooperation: Acts as a team player that balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed., • Problem Solving: Identifies and resolves problems in a timely manner, gathers and analyzes information, develops alternative solutions, and uses reason when handling a variety of situations, • Ability to multitask: Able to complete multiple tasks effectively at once in a safe and productive manner, • Strong work ethic, willingness to learn, and positive attitude Qualifications: • High school diploma or general education degree (GED); and a minimum of three years related experience and/or training; or equivalent combination of education and experience, • 2 years of maintenance experience desired - specialized training in carpentry, plumbing, HVAC, and electrical fundamentals are preferred, • Experience in the printing industry is a plus, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • Must be able to read and interpret ruler, scales and other measurement devices Work Environment: • The work environment characteristics described are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Most of the time will be spent in the manufacturing plant, which may contain equipment and machinery that can be noisy and hazardous, • Occasionally works at a desk to complete administrative tasks, • Is frequently exposed to moving mechanical parts, • Is occasionally exposed to chemicals, some of which could be hazardous, • Noise level is usually moderate Physical Demands: • The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regularly required to stand, talk, and hear, • Occasionally required to walk, and use hands to handle or feel, • Occasionally required to lift or move up to 40 pounds Company DescriptionAt Resource Label Group, we are a full-service manufacturer of custom label design and printing for a wide range of industries. With full-scale capabilities coast-to-coast and 33+ locations across North America, we are dedicated to delivering cutting-edge label printing with a national reach and local touch. As Resource Label Group continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee-centric, collaborative culture that is technology-driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients.At Resource Label Group, we are a full-service manufacturer of custom label design and printing for a wide range of industries. With full-scale capabilities coast-to-coast and 33+ locations across North America, we are dedicated to delivering cutting-edge label printing with a national reach and local touch.\r\n\r\nAs Resource Label Group continues to grow, we are always looking for talented individuals to join our team! Every person in our company contributes to our success. We offer an employee-centric, collaborative culture that is technology-driven and focused on delivering valuable, creative solutions. Our core values embody the way we interact with each other just as it influences the way we interact with clients.

Job DescriptionCOMFORT WINDOWS & DOORS is seeking EXPERIENCED SIDING INSTALLERS for IMMEDIATE employment. We have an extensive amount of siding work to keep you busy full-time and year-round! The following proven experience and skills are required: • Siding installation process, including:, • setup/staging, • removal of existing material, • wrapping, • insulation, • accurate measurement, • efficient cutting/bending, • quality installation of siding, soffit, fascia, window & door wraps, custom trim, • Perform special installations, service, and/or repairs, • Safe, proper usage and maintenance of manual and power tools, • Comfortable working on ladders, scaffolding and lifts at various residential heights, • Willingness to work in all weather conditions, • Maintaining a clean, safe, and orderly job site Along with a competitive hourly pay rate, Comfort Windows & Doors offers: • Full-time, year-round work, • Industry competitive pay rates based on experience, including 1.5x overtime pay, • Incentive and bonus opportunities, • Annual pay increases, • Health, dental, and vision coverage plans, • FREE $10,000 life insurance policy, • 401K plan with a dollar-for-dollar company match up to 4%, • Generous number of paid days off for holidays, vacation, and sick time, • Promotions from within for great career advancement Comfort Windows & Doors is Upstate NY's #1 home remodeling contractor with more than 40 years of experience in the home improvement industry. As a family-owned contractor, we manufacture locally and install using only our own trained employees. For everything from replacement windows to basements, siding to bathrooms, doors and more, Comfort Windows & Doors does the job right from start to finish. Comfort Windows & Doors is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Residential Siding Installer, Vinyl Siding Installer, Aluminum Siding Installer, Hardie Board Installer, Exterior Siding Specialist, Home Siding Installation, Residential Construction Siding, Siding Crew Member, Siding Technician, House Siding Jobs, Siding Laborer, Experienced Siding Carpenter, Soffit and Fascia Installer, Window and Door Trim Installer, Exterior Cladding Installer, Cedar Shake Installer, Lap Siding Installer, Custom Siding Installer, Siding Removal and Replacement, Trim and Wrap Installer, Flashing and Sheathing Installer, Housewrap Installer, Exterior Home Renovation, Residential Exterior Finishing, Home Exterior Specialist, Residential Remodeling Installer, Siding Foreman, Siding Mechanic, Cladding Installer, Construction Installer – Siding, Remodeling Construction Jobs, Exterior Installer Jobs. Renewal by Andersen, Erie Home, Alure Home Improvements, Power Home Remodeling, Window World, Universal Windows Direct, Home Depot, Lowes, ABC Seamless, DaBella, Champion Windows, LeafFilter, LeafGuard, Pella.

Job Description Schedule: Monday- Thursday 6:00AM- 4:30PM Pay Rate: $17.50 per hour. Employees have the opportunity to receive salary increases as they progress through our tiered training program. CLIMATE CONTROLLED ENVIRONMENT Objective: To assemble, test and tag hoses, tubes, fittings, and accessories with the highest level of quality and efficiency. Minimum Requirements: • Ability to comprehend and execute work assignments with minimal follow up supervision, • Ability to stand throughout entire shift, • Be customer service and quality driven, • Ability to read and comprehend blueprints, • Ability to be cross trained in other functions, • Observant, attentive to detail, and quality conscious, • Self-motivated and task driven, • Basic math, reasoning, and problem-solving skills, • Ability to work independently or in a team environment, • Execute assignments as given by the supervisor or group leader, • Meet or exceed quality of work and quantity expectations, • Follow all work instructions, policies, work rules, safety guidelines, and work procedures, • Utilize measurement devices like calipers, digital scales, and gage clocks to perform quality checks as required, • Perform basic preventative equipment maintenance as assigned, • Participate in problem solving, continuous improvement, and customer complaint resolution efforts, • Immediately inform supervisor or group leader of all equipment, process, material, safety, or quality concerns, • Training other team members as assigned, • Participate in daily area clean up and more significantly facility clean-up efforts as assigned, • Read and understand product blueprints and technical data sheets as required, • Set up machinery and properly use protractors and other jigs and fixtures as required, • Ensure completed product and left-over materials are returned to proper locations This position demands physical strength, endurance, using industrial tools and machinery. Candidates must be comfortable with repetitive tasks, heavy lifting (up to 40 lbs.), standing for a long period of time, bending, twisting, pushing, pulling and working in a fast-paced production setting

Job DescriptionQuality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 3:30 PM–12:00 AM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities * Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies * Conduct visual weld inspections and dimensional inspections * Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints * Maintain accurate QC reports, inspection logs, and test data * Calibrate and maintain measurement tools and QC equipment * Identify nonconformities (NCRs) and communicate issues to supervisors * Support continuous improvement for quality assurance and welding quality * Work closely with fabrication, welding, assembly, and engineering teams Qualifications * 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician * Experience with weld inspection and metal fabrication inspection * Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools * Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams * Strong math skills (fractions, decimals, tolerances) * Ability to lift 50 lbs and work in a shop-floor production environment * High school diploma or GED Preferred: * AWS CWI certification or working toward certification * Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer.

Job Description Quality Control Technician (1st Shift – 7:00 AM to 4:00 PM) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 7:00 AM – 4:00 PM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 1st Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and modular assemblies, • Conduct visual weld inspections and dimensional checks, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC inspection reports, logs, test data, and documentation, • Calibrate and maintain measurement tools and weld inspection equipment, • Identify nonconformities (NCRs) and communicate findings to supervisors and engineering, • Support continuous improvement activities for quality assurance and welding quality, • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection, metal fabrication inspection, and structural steel products, • Proficiency using calipers, gauges, tape measures, squares, weld inspection tools, and measurement devices, • Ability to read and interpret mechanical drawings, fabrication prints, electrical diagrams, and weld symbols, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work on the production floor, • AWS CWI certification (or actively pursuing) Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off

Job Description Quality Control Technician (2nd Shift – 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY Schedule: Monday–Friday, 3:30 PM–12:00 AM GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities • Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies, • Conduct visual weld inspections and dimensional inspections, • Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints, • Maintain accurate QC reports, inspection logs, and test data, • Calibrate and maintain measurement tools and QC equipment, • Identify nonconformities (NCRs) and communicate issues to supervisors, • Support continuous improvement for quality assurance and welding quality, • Work closely with fabrication, welding, assembly, and engineering teams Qualifications • 2–5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician, • Experience with weld inspection and metal fabrication inspection, • Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools, • Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams, • Strong math skills (fractions, decimals, tolerances), • Ability to lift 50 lbs and work in a shop-floor production environment, • High school diploma or GED Preferred: • AWS CWI certification or working toward certification Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance

Job DescriptionWelding Inspector (CWI) | GTI Fabrication – Buffalo, NYCompany Overview GTI Fabrication specializes in the design, engineering, and fabrication of custom modular structures, ballistic metal fabrication, and shipping container-based solutions. We serve a wide range of industries, including DOD contractors, military, disaster relief, and commercial markets. Our Buffalo, NY facility houses all aspects of manufacturing, welding, and quality control, ensuring top-tier craftsmanship and compliance with industry standards. Position Overview We are seeking a Certified Welding Inspector (CWI) to oversee QA/QC for our welding operations, ensuring compliance with customer specifications, ASME codes, and safety regulations. This role works independently from the welding team while collaborating closely with the Quality Assurance Department to maintain high standards in welding inspection and defect prevention. Key ResponsibilitiesWelding Inspection & Quality Assurance • Welding Inspector must be able to interpret and inspect blueprints, drawings, and customer specifications., • Ensure compliance with ASME WPS (Welding Procedure Specifications) and welder/welding operator qualifications., • Conduct visual inspections and penetrant testing (PT) per ASME Code., • The Welding Inspector will approve incoming materials, verifying specifications and conducting visual and measurement tests., • Oversee in-process and final product inspections, ensuring welds meet required standards., • Identify defects and recommend corrective actions to management.Quality Control & Documentation, • Maintain inspection records and quality reports to track compliance., • The Welding Inspector will ensure reworks are completed to standard before final approval., • Assist in developing solutions to improve inspection processes and welding quality. GTI Fabrication is an equal opportunity employer and welcomes applicants from all backgrounds.

Job Description Sr. CMM Programmer – Aerospace Manufacturing Location: Buffalo, NY (Onsite) Type: Full-Time Salary Range: Up to $47/hr + annual profit sharing + full benefits About the Opportunity Our client, a global leader in aerospace manufacturing, is seeking a Senior CMM Programmer to join its Industrial Group in East Aurora, NY. This position is responsible for programming, operating, and maintaining Zeiss Calypso CMM systems to ensure precision and quality across high-complexity aerospace components and assemblies. The ideal candidate brings a strong understanding of Geometric Dimensioning & Tolerancing (GD&T), exceptional problem-solving ability, and a leadership mindset to guide inspection strategy and team development. This is an opportunity to join a company that values innovation, collaboration, and long-term career growth. What You’ll Do ● Program and operate Zeiss CMMs using Calypso software to inspect aerospace parts and assemblies ● Plan, develop, and proof CMM inspection programs for complex geometries ● Interpret engineering drawings, specifications, and GD&T to ensure precise dimensional reporting ● Lead and mentor the site’s CMM programming group, planning workload and training quality personnel ● Perform root cause analysis, troubleshoot programs, and resolve measurement issues ● Collaborate with engineering and manufacturing to enhance product quality and inspection methods ● Maintain CMM calibration and equipment performance per manufacturer standards ● Contribute to continuous improvement and cost-effective measurement systems What You Bring ● Associate’s degree (or equivalent experience) in a technical field ● 7+ years of CMM programming experience (Zeiss/Calypso preferred) ● Deep knowledge of GD&T and precision inspection standards ● Experience in an aerospace, defense, or advanced manufacturing environment ● Strong communication skills and a collaborative approach to cross-functional teamwork What’s Offered ● Base salary: $79,000 – $97,000 ● Annual profit sharing, 401(k) match, and employee stock purchase plan ● Full health, dental, and vision coverage ● Paid time off, holidays, and parental leave ● Tuition assistance, mentorship, and leadership development programs ● Relocation assistance available for ideal candidates Want to Stand Out? We invite you to record a short video introducing yourself — share how your background in CMM programming, Zeiss Calypso, or aerospace inspection aligns with this opportunity. Submit your video here:

Job Description Pay: $22.00 - $32.00 per hour Job description: Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Competitive pay with 2nd-shift differential, • Overtime opportunities, • Growing industrial and modular fabrication environment, • Work on complex and custom steel structures We are an equal opportunity employer committed to a safe, inclusive, and diverse workplace. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Vision insurance Work Location: In person Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Welder / Fabricator – 1st Shift (7:00 AM–4:00 PM) Location: Buffalo, NY Schedule: 1st Shift | 7:00 AM – 4:00 PM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview GTI Fabrication is hiring an experienced 1st Shift Mechanical Welder / Fabricator for our industrial manufacturing operations in Buffalo, NY. The Welder/Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and modular fabrication parts using MIG/GMAW, TIG/GTAW, Stick, and other welding processes in a high-paced production environment. Ideal candidates have experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, and industrial metal fabrication. Daily ResponsibilitiesWelding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding, • Weld assemblies, sub-assemblies, brackets, channels, angles, and structural components per drawings, • Prepare and finish welds using grinders, saws, and welding tools, • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics, • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools, • Fabricate fixtures and tooling from engineering sketches, • Assemble welded components into larger structures, frames, platforms, and modular steel units, • Inspect welds for penetration, defects, and adherence to specifications, • Repair or rework fabrication issues or dimensional deviations, • Meet production output, quality standards, and labor-hour goals, • Maintain welding machines, tools, and PPE in safe working condition, • Follow OSHA, AWS, and internal safety procedures, • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder, • Proficiency in MIG, TIG, Stick, GMAW, GTAW, and related processes, • Experience using grinders, saws, clamps, calipers, squares, and measurement tools, • Ability to read and interpret technical drawings, blueprints, and welding schematics, • Knowledge of welding codes, safety procedures, and inspection standards, • Ability to lift 50 lbs and perform bending, kneeling, climbing, and overhead work, • Strong attention to detail and craftsmanship, • AWS Certification (GMAW, 3G Vertical Up, 4F Overhead), • Experience welding carbon steel, stainless steel, and alloy materials, • Background in structural steel, modular fabrication, or heavy manufacturing, • Knowledge of plasma cutting, torch cutting, and GTAW/TIG welding, • Understanding of fabrication tolerances and measurement verification, • Consistent 1st shift schedule (7:00 AM–4:00 PM), • Competitive pay + overtime opportunities, • Fast-growing modular and steel fabrication environment, • Work on complex, custom steel structures and large-scale fabrication projects We are an equal opportunity employer committed to a safe, inclusive, and diverse workplace. Job Type: Full-time Pay: $22.00 - $30.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off

Job Description At Danforth, we are committed to fostering education and growth by offering an immersive learning experience for students eager to explore and gain practical experience in project management within the mechanical contracting industry. Kick-Start Your Career Are you ready to embark on an exciting journey in mechanical contracting? As a Construction Management Intern at Danforth, you will be part of our Project Management group and report directly to an assigned Project Manager/Mentor. You’ll gain hands-on exposure to real projects while learning and applying JW Danforth Standard Operating Procedures outlined in our Project Management Manual. Your responsibilities will include supporting the Project Team in the execution of project tasks and milestones—ranging from pre-construction planning and document control to installation status monitoring and labor productivity measurement. Program Highlights As an intern, you will: • Support Foremen and Field Teams by coordinating tools, materials, equipment, and schedules., • Gain exposure to Lean construction principles and learn how time, materials, and milestones impact project success., • Collaborate with Shops on fabrication opportunities and improve scheduling/planning processes., • Identify project inefficiencies and assist with performance tracking., • Participate in project, client, and internal process activities (Procurement, CAD, Document Control, Change Proposals, Closeout). Experience & Competencies • Willingness and ability to learn., • Strong organizational skills., • Integrity, punctuality, and enthusiasm to represent Danforth to our customers., • Excellent communication and collaboration skills., • Enrollment in an accredited 2- or 4-year Construction Management degree program. Why Join Us? This internship is designed to empower you with the knowledge, skills, and confidence to thrive in the mechanical contracting field. By working on meaningful projects and gaining hands-on experience, you’ll build a solid foundation for your future career. If you’re ready to take the first step toward a rewarding career, we’d love to welcome you to our team! John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Industrial Coater / Powder Coater – Full-Time – Buffalo, NY About GTI Fabrication GTI Fabrication is a leading manufacturer specializing in custom modular structures, shipping container-based buildings, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial sectors. Our advanced containerized and modular solutions are all built in-house at our Buffalo, NY facility. Our manufacturing capabilities include military training enclosures, live fire enclosures, modular bathroom and shower units, expeditionary camps, medical facilities, water treatment systems, energy storage enclosures, and more. We are seeking a skilled Industrial Coater / Powder Coater to join our team! If you have experience in industrial painting, powder coating, abrasive blasting, or metal finishing, we encourage you to apply. Job Responsibilities Application of Powder & Wet Coatings: * Applying powder coatings using manual powder coating units. * Properly measuring and mixing liquid coating systems. * Applying zinc primers, epoxies, and polyurethane top coat using airless, air-assisted, and conventional spray equipment. Equipment & Process Management: Properly loading & hanging parts for coating process Setting up proper powder coating oven temperatures and batch curing settings. * Maintaining and operating paint spray guns, powder equipment & booths, and other finishing tools. * Moving materials through the production process manually or with forklifts. Equipment & Process Management: • Setting up proper powder coating oven temperatures and batch curing settings., • Maintaining and operating paint spray guns, powder coat booths, and finishing tools., • Inspecting finished products to ensure compliance with company and customer specifications., • Recording coating thickness (wet and dry) on daily logs. ✔ 1+ years of experience in Powder Coating or Industrial Coatings. ✔ Knowledge of abrasive blast cleaning and surface preparation. ✔ Familiarity with powder coating application in batch-style booths and ovens. ✔ Experience mixing and applying two-component primers, epoxies, and topcoats. ✔ Ability to use airless, air-assisted, and conventional spray systems. Preferred Qualifications ✔ 3+ years of experience in Powder Coating or Industrial Painting. ✔ Strong understanding of metal surface cleaning and preparation using hand tools, power tools, and abrasive blasting. ✔ Experience with powder coating process optimization and equipment maintenance. ✔ Ability to interpret and follow Product Data Sheets (PDS) and Safety Data Sheets (SDS). ✔ Proficiency in coating thickness measurement and documentation. Why Join GTI Fabrication? Competitive Pay – Based on experience, with overtime opportunities. Full-Time & Stable Employment – Join a growing manufacturing team with long-term career potential. Exciting Projects – Work on high-profile, military, and commercial fabrication projects. Career Growth – Expand your expertise in industrial coatings and metal finishing. Team-Oriented Environment – Work with experienced professionals in fabrication and engineering. Location: Buffalo, NY Job Type: Full-time Apply Now! If you have powder coating, industrial painting, or metal finishing experience, we want to hear from you! Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Shift:1st (one opening): M-F, 6:30am-3:00pm2nd (two openings): M-Th, 2:30pm-1:00am Pay Range: $21.50-$29.002nd shift has a $1.00 shift differential so top of the range would be $30.00/Hourly.Signing bonus after 30 days to be considered for candidates needing to relocate for the position. Equipment: Minimum 1 year of narrow web printing experience. Likely Marc Andy FlexoJob Description • Reads job order and loads dies into the press, installs print cylinder on shaft, and installs print cylinder in press., • Fills ink pans, screens, and pumps with prescribed inks., • Starts press, adjusting speed and alignment of stock to the print cylinder as necessary., • Engages print cylinders; adjusts printing impression as necessary, places print cylinders lead-to-lead, and runs down approval strip., • Cuts sample of approval strip from printed roll, inspects for imperfections such as print to print out of register, print to die out of register, missing impression, ink starvation or color adjustments, making adjustments as necessary., • Cleans plates, print cylinders and dies as needed, performs daily, weekly and monthly maintenance as required., • Mixes inks to produce and maintain desired colors and viscosity., • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience, • A minimum of one year of flexographic printing press experience preferred, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • Must be able to read and interpret ruler, scales and other measurement devices., • While performing the duties of this job, the employee is regularly required to stand and frequently is required to walk, • The employee must frequently lift and/or move up to 50 pounds with or without mechanical assistance

Job DescriptionIndustrial Coater / Powder Coater – Full-Time – Buffalo, NYAbout GTI Fabrication GTI Fabrication is a leading manufacturer specializing in custom modular structures, shipping container-based buildings, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial sectors. Our advanced containerized and modular solutions are all built in-house at our Buffalo, NY facility. Our manufacturing capabilities include military training enclosures, live fire enclosures, modular bathroom and shower units, expeditionary camps, medical facilities, water treatment systems, energy storage enclosures, and more. We are seeking a skilled Industrial Coater / Powder Coater to join our team! If you have experience in industrial painting, powder coating, abrasive blasting, or metal finishing, we encourage you to apply. Job Responsibilities Metal Surface Preparation & Coating: * Cleaning, prepping, and coating metal substrates to ensure high-quality finishes. * Using abrasive blasting techniques to achieve the desired surface profile. Application of Powder & Wet Coatings: * Mixing and applying powder coatings, epoxies, primers, and topcoats. * Using airless, air-assisted, and conventional spray equipment to apply coatings. Equipment & Process Management: * Setting up proper powder coating oven temperatures and batch curing settings. * Maintaining and operating paint spray guns, powder coat booths, and finishing tools. * Moving materials through the production process manually or with forklifts. Quality Control & Safety Compliance: * Inspecting finished products to ensure compliance with company and customer specifications. * Recording coating thickness (wet and dry) on daily logs. * Keeping the work area and equipment clean and properly maintained. Job Requirements ✔ 1+ years of experience in Powder Coating or Industrial Coatings. ✔ Knowledge of abrasive blast cleaning and surface preparation. ✔ Familiarity with powder coating application in batch-style booths and ovens. ✔ Experience mixing and applying two-component primers, epoxies, and topcoats. ✔ Ability to use airless, air-assisted, and conventional spray systems. Preferred Qualifications ✔ 3+ years of experience in Powder Coating or Industrial Painting. ✔ Strong understanding of metal surface cleaning and preparation using hand tools, power tools, and abrasive blasting. ✔ Experience with powder coating process optimization and equipment maintenance. ✔ Ability to interpret and follow Product Data Sheets (PDS) and Safety Data Sheets (SDS). ✔ Proficiency in coating thickness measurement and documentation. Why Join GTI Fabrication? ???? Competitive Pay – Based on experience, with overtime opportunities. ???? Full-Time & Stable Employment – Join a growing manufacturing team with long-term career potential. ???? Exciting Projects – Work on high-profile, military, and commercial fabrication projects. ???? Career Growth – Expand your expertise in industrial coatings and metal finishing. ???? Team-Oriented Environment – Work with experienced professionals in fabrication and engineering. ???? Location: Buffalo, NY ???? Job Type: Full-time ???? Apply Now! If you have powder coating, industrial painting, or metal finishing experience, we want to hear from you!

Job Description Join Our Innovative, Independent Medical Practice as a Healthcare Marketing and Communication Manager! Our Healthcare Marketing and Communication Manager is responsible for helping to grow the practice by developing and implementing strategic marcom plans for highly competitive healthcare service lines. The ideal candidate has successful business-to-consumer marketing experience; excels at working independently and “rolling up their sleeves” to get the job done; and has experience managing a full- service marketing agency relationship. We are looking for someone to who can develop into, or immediately join, our senior leadership team responsible for growth and reputation management. Position reports to the Chief Executive Office and Chief Operating Officer. Duties and Responsibilities Strategy and Plans: Develop and execute comprehensive marketing and communication strategies and plans to highly targeted audiences to grow the physician practice across priority service lines. Agency Interaction and Management: Articulate physician/leadership vision and business goals and communicate them effectively to our agency partner. Collaborate with and manage agency account/project manager and creative team to ensure alignment and successful execution of campaigns; provide continuous reporting and feedback to both the agency and practice leadership. Social Media: Execute social media strategies, create daily content and monitor channels to increase brand awareness, engagement and lead generation on targeted social media platforms. Email Marketing: Develop and implement email marketing and nurture campaigns, including segmentation, automation and A/B testing. Events: Organize promotional events and coordinate day-of deliverables and staffing as needed. Public and Media Relations: Oversee public and media relations strategies and campaigns that lean into both traditional and non-traditional media (podcasts, short-form video, etc.) to enhance physician’s reputation as an international medical thought leader and first-in-class integrative medicine and concierge medicine provider. Internal Communication and Staff Engagement: Ensure practice team members are excellent brand ambassadors through development of talking points, marketing materials and training sessions. Support internal communication by promoting staff achievement, success stories, events and company culture. Measurement and Reporting: Develop, track and report key performance indicators (KPIs) to measure the success of marketing efforts for continuous improvement. Experience and Knowledge • A minimum of 3-5 years of retail marketing and communication experience o Ideal candidate will have marketing experience in a competitive healthcare industry • Demonstrated experience in marcom strategy, planning and implementation, • Demonstrated experience interacting with a full-service marketing agency o Ideal candidate will have managed an agency relationship • Experience with integrated marketing and communication campaigns including targeted digital marketing campaigns; organic and paid social media campaigns; public and media relations; website design best practices; and analytics and reporting o Ideal candidate will have experience with paid influencers, thought leader development, and developing physician referral relationships o Ideal candidate will display in-depth knowledge in CRM, loyalty, digital marketing and social media Education, Qualifications and Skills • Bachelor's degree in marketing, communication or related field of study or equivalent work experience, • Proficient computer and technology skills: Microsoft business suite (e.g. Word, Excel, PowerPoint); social media planning and development; project management (e.g., Trello, Basecamp, etc.); basic design (e.g., Canva, InDesign); AI content tools (e.g.,ChatGPT), • Effective, demonstrated written and verbal communication skills, • Professional appearance and comfortable public speaking at in-person marketing events, • Critical thinking skills, and ability to make recommendations to improve any aspect of the team process, practices and tools Job Type, Compensation and Benefits This is a full-time and on-site position (hybrid schedule may be an option in the future); some evening and weekend events and travel may occasionally be required. Compensation: $75,000 - $90,000 per year, plus annual bonus based on achievement of SMART goals. Benefits include: Medical/Dental/Vision, Paid Time Off, Paid Sick Leave, 7+ Paid Holidays, 401k w/ Safe Harbor Contribution, Various EE Discounts.

Job Description Major Job Duties (all departments) · Weigh and measure ingredients · Verify product temperature · Operate machines or manually assemble boxes; affix labels · Operate production machines and manually assemble product to company specifications · Manually assemble product in teamwork setting to company specifications · Operate packaging machines and manually package product to company specifications · Operate an Electric Power Jack · Take direction from and answer to Department Supervisor/Foreman · Work with fellow employees in a teamwork approach to complete daily product production schedule · Inspect product for quality · Perform product production and packaging in low temperature environments while standing for long periods of time · Monitor, record and verify each step in operations to company Standard Operating Procedures · Other duties as assigned Competency Requirements · Can pay attention to detail, such as monitoring product to consistently meet company standards for food safety and quality · Ability to work successfully with a team to meet production schedules · Monitors own work performance to company standards and adjusts to meet minimum expectations of self and team · Must be able to perform all duties in all production departments as employees rotate at any time between jobs · Must be able to adapt to changes in work areas and jobs due to changes in schedules, employee availability and machine availability · Knows and understands company policies and procedures and can apply them to food production and employee and company safety · Ability to find ways to improve processes to improve productivity and product safety and quality · Can ask for help and takes direction from fellow team workers and management · Ability to read and interpret documents and instructions to assist in the successful performance your job · Uses a ‘common sense’ approach when carrying out written and oral instructions Education, Ability and/or Experience · Knowledgeable about OSHA, USDA and HACCP regulations and policies · Add and subtract, and perform these operations using weight measurement, volume and temperature · Read a scale and adjust weights as required · Solve problems involving a few variables in standardized situations Essential Job Functions · Must be able to perform all duties in all production departments as employees rotate at any time between jobs · Regularly required to stand and use hands to finger, handle, or feel · Frequently required to walk, twist, bend, reach with hands and arms, and talk and hear · Frequently lift and/or move up to 30 pounds and occasionally lift and/or move up to 100 pounds · Regularly exposed to wet and/or humid conditions; moving mechanical parts and cold · Regularly work in an environment that is usually loud · Hearing protection as well as other mandatory Personal Protective Equipment are required and mandatory Physical Demands · Occasionally required to stoop or twist and bend at the waist · Occasionally push/pull up to 1000 lb · Specific vision abilities required by this job include close vision Company DescriptionSahlen Packing Co. is a family-owned business founded in 1869 in Buffalo, New York. We are dedicated to offering customers the freshest and highest quality meat products. Over the years, we have expanded our state-of-the-art processing facility to meet customer demands and now offer our premium meat products in over 25 states. As we celebrate over 150 years of doing business, we continue to prioritize providing our customers with the finest products available. Sahlen's is actively engaged in the Western New York Community.Sahlen Packing Co. is a family-owned business founded in 1869 in Buffalo, New York. We are dedicated to offering customers the freshest and highest quality meat products. Over the years, we have expanded our state-of-the-art processing facility to meet customer demands and now offer our premium meat products in over 25 states. As we celebrate over 150 years of doing business, we continue to prioritize providing our customers with the finest products available. Sahlen's is actively engaged in the Western New York Community.