Trabajos mechanical design engineer en Plainfield, New JerseyCrear alertas

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Quality Engineer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: My client is a leading manufacturing company who is growing! They are looking to add a Quality Engineer to their team who is responsible for supporting aerospace quality assurance activities for manufacturing, repair, inspection, test, supplier quality, customer quality, and regulatory compliance. Why join us? Compensation Up To $120,000 Job Details Essential functions and Responsibilities Quality System, Regulatory, and Customer Compliance Support and assure compliance with applicable aerospace regulatory and quality system requirements, including AS9100, ISO 9001, FAA Part 21 production approval requirements, FAA Part 145 repair station requirements, and applicable customer-specific quality requirements. Review products and documentation in accordance with applicable customer, regulatory, military, industry, and internal quality requirements. Contract, Technical Data, and Quality Planning Review Review customer purchase orders, drawings, specifications, quality clauses, repair instructions, ATPs, OMMs/CMMs, and flow-down requirements to ensure quality planning, inspection, documentation, and release activities are properly defined before work is performed. Work closely with Product Engineering, Manufacturing Engineering, Manufacturing, Test, and Inspection personnel to resolve quality-related issues involving design, methods, tooling, procedures, costs, and product conformance. Establish, revise, and maintain written procedures, instructions, and quality documentation related to product quality assurance activities. Nonconforming Material, MRB, and Corrective Action Participate in Material Review Board and nonconforming material activities, including defect investigation, containment, disposition support, customer notification support, and verification of corrective actions. Perform root cause analysis using tools such as 8D, 5 Whys, fishbone/Ishikawa, and other structured problem-solving methods to identify appropriate corrective and preventive actions. Inspection, Test, FAI, and Product Release Oversee critical testing and inspection activities; coordinate inspections with customers, source inspectors, government representatives, and internal inspection personnel as required. Analyze and document inspection and test results to support product acceptance, customer release, and corrective action activities. Review raw material certifications and approve raw material for production release when required. Prepare, review, and approve product data packages, including inspection records, test reports, material certifications, special process certifications, traceability records, and customer-required documentation. Customer, Supplier, and Delegated Quality Activities Communicate directly with customers, suppliers, auditors, inspectors, and internal stakeholders in a clear, professional, and technically accurate manner. Interface directly with customers to support quality planning, customer concerns, source inspection, audit support, product release, and issue resolution. Education and Skills Requirements Four-year technical degree or equivalent experience required; Mechanical Engineering degree preferred. Four to eight years of experience in Quality Assurance, Quality Engineering, Manufacturing Engineering, or equivalent experience in aerospace, defense, or another highly regulated manufacturing environment. Experience working in a manufacturing environment with frequent shop floor interaction, including direct support of production, inspection, test, engineering, and customer-facing quality activities. Working knowledge of AS9100 and ISO 9001 requirements required. Experience preparing, reviewing, or approving AS9102 First Article Inspection Reports required. Familiarity with FAA 8130-3 documentation, repair station documentation, FAA Part 21 production approval documentation, or FAA Part 145 repair station documentation preferred. Familiarity with APQP/PPAP, AS9145, AS13100, key characteristics, process capability, and MSA preferred. Experience with root cause analysis and corrective action methods, including 8D, 5 Whys, fishbone/Ishikawa, containment, corrective action, preventive action, and effectiveness verification. Experience reviewing aerospace technical data, including drawings, specifications, purchase orders, ATPs, OMMs/CMMs, material certifications, special process certifications, and customer quality clauses. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Cover Letter Required Abraxas Energy Consulting, LLC, a subsidiary of Hillmann Consulting, LLC, is a nationwide energy auditing and consulting firm that provides energy assessments, training, and software tools to assist facilities in reducing energy and water waste. Together, Abraxas and Hillmann can provide customized Energy Analysis, Energy Accounting, Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Abraxas and Hillmann deliver consulting with an uncompromising commitment to customer service, safety, and increasing value and quality to our clients. Abraxas has an immediate opening for an experienced Energy Engineer for nationwide coverage out of the Union, NJ area to lead facility energy and water assessments and provide other energy consulting services. Typical assignments will include leading on-site energy and water assessments, retro-commissioning activities, field measurement and verification, and field diagnostic testing/deployment. The Energy Engineer is expected to be capable of leading an energy audit following ASHRAE’s Level 2 energy audit methodology for most facilities independently from start to finish. However, the Energy Engineer is also expected to work in small teams when necessary on larger projects and to facilitate mentorship of more junior team members. This position requires a high level of individual initiative, responsibility, work ethic and time management skills to meet shifting and overlapping project deadlines. The work will involve regular interaction with clients in person, on the phone, and via email. The Energy Engineer will work with team members to request information, solicit feedback, and clearly define project responsibilities is crucial. The Energy Engineer will also need to communicate with their peers and Project Managers regarding their schedule, roadblocks to their work, and additional support that may be required. Responsibilities: Field Tasks The tasks will range in complexity from one day walk thru site visits to investment grade energy audits to identify energy reduction opportunities in lighting, HVAC, building envelope, water, renewables, controls, and other energy and water using systems. • Conduct/lead detailed energy surveys of facilities ranging from simple office or multifamily properties to complex high-rise offices, manufacturing, and/or other energy intensive buildings., • Lead building retro-commissioning activities including functional performance testing and monitoring of equipment., • Lead measurement and verification field work including visual verification, sampling strategies, and complex field measurements., • Conduct energy audits., • Adapt to varying field data collection techniques including handwritten notes, tablet-based tools, photo logging, review of as-built drawings, review of building control systems, use of measurement devices and hand tools, etc., • Deploy field diagnostic equipment such as wireless monitoring systems, data loggers, flow meters, power loggers, multimeters, temperature devices, air flow meters, manometers, lighting meters, current transducers, appropriate personal protective equipment (PPE), hand tools, etc. Analysis • Keep current with new energy efficiency technologies and strategies., • Analyze and evaluate results from measurements including interval energy data, lighting readings, etc., • Interpret, and tabulate information from facility mechanical and electrical drawings such as lighting fixture counts, mechanical equipment ratings/locations, piping diagrams, etc., • Interpret control strategies and sequences. Analyze and propose optimum strategies for all types of energy using equipment., • Complete detailed energy allocations that predict with reasonable accuracy the breakdown of major energy users in a building., • Evaluate operations and maintenance savings and estimate the cost to implement energy conservation measures., • Exercise experience and research to scope energy improvements to building systems in detail and quantify accurate installed cost estimates., • Communicate with and obtain vendor quotes for proposed improvements as needed., • Complete life-cycle cost analysis for energy improvement projects., • Perform energy and economic analysis of energy efficiency measures using energy modeling software, spreadsheets and other tools. Reporting and Presentation • Document and communicate the results of energy audits through written reports, PowerPoint presentations, meetings, and conference calls., • Meet with clients and team members to discuss energy efficiency measures., • Keep current with new energy efficiency technologies and strategies., • Convey technical concepts and recommendations in a clear, concise, and meaningful way. Other • Review the work of more junior Auditors and Energy Analyst assigned to your own projects and ensure all tasks are completed accurately., • Mentor and train supporting Energy Analyst and Auditor in how best to support the engineering project., • Conduct peer review of other engineers’ work., • Conduct scoping assessments to evaluate client facilities for potential work with Abraxas, • Support business development through technical input on proposals, quotes, capabilities, etc., • Support operations with the optimization of processes and development and improvement of tools, templates, resources, and training content. This job has no supervisory responsibilities. Minimum Qualifications (Education, Skills, and Experience): Meeting these qualifications will make you eligible for a starting salary at the low end of the posted range: • Preferred: Bachelor of Science Degree in Mechanical Engineering, Electrical Engineering, or other four-year STEM degree AND 3+ years of experience in the analysis of energy using systems in existing buildings., • Minimum: 2-year technical, math, or science degree AND 5-10+ years pf experience in the analysis of energy using systems in existing buildings., • Mastery of the English language – written and spoken., • Advanced competency with Microsoft Excel and Microsoft Word and ability to improve., • Experience surveying and analyzing the operation of complex mechanical and electrical systems in buildings and their associated control algorithms., • Experience writing detailed energy audit and engineering reports including conveying as-found conditions and recommended capital improvements., • Experience with the application of advanced mathematical concepts to energy use analysis in buildings., • Experience presenting the results of an energy audit or re-commissioning project to small groups of stakeholders. Additional Valuable Qualifications: Meeting these qualifications may make you eligible for a starting salary at the high end of the posted range: • 7+ Years of related experience, • NABCEP Certification: PV Installation Professional (PVIP), PV Design Specialist (PVDS), or PV Installer Specialist (PVIS), • Professional Engineer license in any state., • A certification in any of the following: Certified Energy Manager, Certified Lighting Efficiency Professional, LEED Accreditation, Certified Energy Auditor, Building Performance Institute, HERS Rater., • Experience with self-performing advanced field measurements in existing buildings including: spot and long-term power measurements, 3 phase power measurements, airflow duct traverses, ultrasonic flow metering, combustion gas analysis, airflow hood testing, thermal imaging, non-destructive envelope measurements, etc., • Experience in new construction and/or existing building commissioning., • Experience developing energy simulation models with DOE-2, eQUEST, TRANE TRACE 700, TRACE 3D or similar programs., • Experience creating measurement & verification plans for energy projects. TRAVEL - While many project assignments are local or regional, the Energy Auditor should expect to be gone from home 5-7 nights per month on average. Abraxas reimburses all travel expenses according to the company’s Travel and Expense Policy. Benefits: Abraxas Energy Consulting, LLC and Hillmann Consulting, LLC are committed to the professional development and well-being of our employees. The following benefits are offered to employees: · Competitive salary · Paid vacation and sick leave · Medical, dental, and vision insurance · Employer-401(k) Plan · Tuition assistance · Volunteer time off Abraxas Energy Consulting, LLC is an equal opportunity employer.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ full-plant management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We’re hiring a bilingual (English/Spanish) Plant Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Plant Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Plant Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ full-plant management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job DescriptionPatuxent Engineering, LLC is seeking an Entry Level Structural Engineer for our NJ/NYC Office located in Metuchen, NJ. This position is an in-office role working with a team of engineers and designers. Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience).- Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction.- Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once.- Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job Description Job Summary: Karbon Engineering has an outstanding opportunity for a talented and motivated Mechanical or Electrical Commissioning Engineer. Candidates must have 2-6 years of experience in operation / testing of: Mechanical Candidate: HVAC systems including water-cooled or air-cooled chiller plants, primary-secondary pumping systems, variable-flow primary-only pumping systems, air handling units, fans and control systems or equivalent mechanical systems. Electrical Candidate: UPS Systems, Generators, Switchgear Controls Must have good communication skills, be computer literate and be able to travel. Experience with Facility Grid a plus. Bachelor’s degree is desirable; equivalent experience will be considered. Responsibilities: Responsibilities include preparation of commissioning plans, pre-functional checklists and test procedures; performing construction inspections, testing equipment and systems, report writing, running meetings and discrepancy resolution. Company DescriptionKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to careers@karbonengineering.comKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area.\n \nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\nPlease submit your resumes to careers@karbonengineering.com

Job Description Job Summary: Immediate Opening for a Project Manager/ Construction / Inspector to work in our Warren, New Jersey office location. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids, and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Estimated salary range for this position is $85,000 to $120,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Work Experience, • 4 years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Licenses and Certifications, • Professional Engineer (P.E.) license desired but not required., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR QClHUuS3ei

Job DescriptionSalary: $70k-100k Position Overview: GRA Design Studio is seeking a skilled and motivated Mechanical Engineer to join our dynamic and engaging team, supporting major national franchise brands such as Wingstop, Playa Bowls, Dave's Hot Chicken, Dunkin', Wonder, Bubbakoo's Burritos, Jersey Mike's Subs, and more. As a key player in our process-driven and creative engineering team, the ideal candidate will have a strong background in mechanical engineering with a focus on HVAC design. The Mechanical Engineer will be responsible for performing HVAC calculations, generating specifications, and sizing plumbing and gas piping systems. Additionally, the role involves creating detailed mechanical layouts, coordinating with other disciplines, and ensuring that designs are executed to the highest standards. This position requires proficiency in AutoCAD and/or Revit and strong project management skills. At GRA Design Studios, we pride ourselves on our end-to-end product line offering, national reach, and commitment to transparency and external communication. We are a disruptive force in the industry, known for our engaging and transparent approach to every project. Job Description: As a Mechanical, Electrical, Plumbing Engineer at GRA Design Studios, you will be responsible for the following: • HVAC Design: Perform load calculations, develop HVAC system layouts, and be responsible for HVAC material to meet project goals. You will also develop and maintain project schedules to ensure timely delivery., • Plumbing and Gas Piping: Size and design plumbing and gas piping systems, ensuring all layouts are accurate and code-compliant. Collaborate with other disciplines to seamlessly integrate these systems into the overall building design., • Layout Creation: Develop detailed mechanical, electrical and plumbing layouts using AutoCAD and/or Revit, ensuring accuracy, clarity, and compliance with standards., • Project Management: Oversee engineering projects from conception through completion, ensuring timelines, budgets, and quality standards are met. Maintain transparent communication with clients and stakeholders, providing regular updates and detailed reporting., • Documentation and Quality Assurance: Prepare detailed engineering reports, specifications, and documentation. Conduct pre and post construction site visits and inspections to verify that installations meet design intent and participate in the commissioning process., • Professional Development: Stay current with industry trends, tools, and technologies. Attend training sessions, workshops, and seminars to maintain professional certifications and licenses, contributing innovative ideas to improve processes. To excel in this role, you should have: • Education: A Bachelors degree in Mechanical or Electrical Engineering or a closely related field from a 4-year accredited college or university., • Experience: Experience: A minimum of 35 years of engineering experience, with proficiency in AutoCAD and/or Revit. Experience performing HVAC calculations, designing HVAC systems, and generating mechanical layouts is essential. Experience sizing plumbing and gas piping systems is also required. Prior fieldwork experience, including site surveys, construction observations, and coordination with contractors, is a plus., • Certification: Engineer-In-Training (EIT) certification is preferred., • Skills: Strong project management, problem-solving abilities, attention to detail, and excellent communication skills, both written and verbal. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Troubleshoot and correct BMS integration issues. Requirements • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Kenvue is currently recruiting for a: Supplier Excellence Engineer What we do At Kenvue, we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we’re the house of iconic brands - including NEUTROGENA®, AVEENO®, TYLENOL®, LISTERINE®, JOHNSON’S® and BAND-AID® that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage – and have brilliant opportunities waiting for you! Join us in shaping our future–and yours. For more information, click here. Role reports to: Director, Global Packaging Operations and Supplier Excellence Location: North America, United States, New Jersey, Summit Work Location: Hybrid What you will do The Supplier Excellence Engineer will be responsible for ensuring that the company's suppliers meet the highest technical standards of quality and performance. The ideal candidate will have experience in the personal care industry and a proven track record of driving supplier excellence. Key Responsibilities Collaborate with cross-functional teams (Procurement, Supplier Quality, Supply Chain, ESG) to drive supplier executional excellence Partner with Procurement, Quality, and ESG to establish and enhance packaging supplier technical assessment Develop and implement supplier performance metrics and scorecards based on the needs of Packaging, Procurement, Quality and ESG partners Conduct and manage supplier audits and technical assessments to identify core technical capabilities and expertise in part design, material selection, mold design, mold qualification, decoration techniques and best practice in part molding quality as well as areas for improvement Coordinate and manage external resources to conduct technical assessments Ability to provide supplier selection recommendations for the procurement and supplier quality teams based on supplier’s technical expertise in specific material and molding category of a certain type of packaging Co-lead with Procurement in establishing Packaging Supplier Joint Business Planning and sourcing strategies to partner with suppliers across different tiers (i.e. packaging components, material, technology, molds, etc.) to co-develop/tap into innovation based on supplier’s expertise Unlock value and drive agility partnering with packaging suppliers and external labs to establish Supplier Package Testing certification program, enabling our supplier base to conduct package testing for Kenvue Establish and maintain strong relationships with regional/global packaging suppliers ensuring strategic partnerships, regular performance evaluations and develop continuous improvement plans In partnership with Procurement, co-lead supplier selection, qualification, and onboarding processes to ensure the availability of high quality, cost-effective packaging materials and services In partnership with Supplier Quality, drive supplier performance metrics, conduct regular supplier assessments, and implement corrective action plans as necessary to maintain high standards of quality, delivery, and cost effectiveness Stay up-to-date with industry trends and best practices What We Are Looking For Qualifications Bachelor's degree in Plastics/Mechanical/Industrial Engineering or equivalent specialization. 4+ years of experience in Plastics Molding Supplier Quality Management or related field Expertise in scientific plastics molding (injection, EBM, ISBM, thermoforming), glass forming and process control Expertise in conducting molding DOE and troubleshooting Strong knowledge of packaging quality standards Knowledge of root cause analysis to address plastic molding issues Experience in the personal care industry preferred Strong analytical and problem-solving skills Excellent communication and interpersonal skills Ability to work independently and as part of a global team Ability to travel domestically and internationally up to 25% What’s in it for you Annual base salary for new hires in this position ranges: $90,100.00 - $127,200.00 This takes into account a number of factors including work location, the candidate’s skills, experience, education level & other job-related factors. Competitive Benefit Package* Paid Company Holidays, Paid Vacation, Volunteer Time & More! Learning & Development Opportunities Kenvuer Impact Networks This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Job Description We are seeking a Senior Engineer, Product Development to serve as a critical bridge between engineering innovation and released product. This is a full-time hands-on, execution-focused role for a senior engineer who knows how to turn promising prototypes and early designs into field-ready, scalable products. This role is not a pure design position-it is a productization role. You will bring structure, rigor, and predictability to development while remaining deeply involved in technical problem-solving and decision-making. You’ll lead execution across development programs, work cross-functionally to resolve ambiguity, and raise the bar for manufacturability, serviceability, and release readiness. Depending on experience and growth, this role may evolve into broader technical or people leadership over time. What You’ll Do Product Development & Productization • Drive the transition of life science instruments and robotic automation systems from prototype or early design into manufacturable, field-deployable products., • Lead productization efforts with strong emphasis on DFM, DFA, and DFS., • Ensure designs account for cost, reliability, quality, manufacturability, and serviceability from early development stages., • Own or lead engineering rigor activities including tolerance analysis, risk assessment, FMEA, design verification and validation, pilot readiness, and design transfer., • Partner with engineers, scientists, and technical stakeholders to convert concepts into scalable, supportable product designs. Project Execution & Cross-Functional Leadership • Directly manage execution of product development programs, actively driving milestones, decisions, risks, and dependencies., • Work closely with R&D, Operations, Quality, Supply Chain, and Service to ensure early and continuous cross-functional input., • Act as a central technical and execution voice—resolving ambiguity, driving decisions, and maintaining momentum., • Communicate status, risks, tradeoffs, and execution challenges clearly to senior leadership, including the CEO., • Help establish realistic plans while strengthening accountability and follow-through. PLM / Stage Gate Development • Help build and implement a more formal PLM / Stage Gate development process., • Define phase criteria, deliverables, reviews, and go/no-go decision points., • Improve documentation, design review cadence, configuration management, and ECO discipline., • Ensure the right stakeholders are involved at the right stages of development. Supplier & Manufacturing Readiness • Engage suppliers and manufacturing partners to assess feasibility and improve design-for-build., • Support creation of release packages including drawings, BOMs, work instructions, and test methods., • Contribute to pilot builds, issue resolution, and lessons learned prior to broader release. What You Bring Required Qualifications • B.S. or M.S. in Mechanical Engineering or a closely related discipline., • 7–12+ years of hands-on experience in product development, NPI, manufacturing engineering, or electromechanical productization., • Proven success taking products from prototype through release into production., • Strong experience with DFM/DFA/DFS and structured product development practices., • Ability to directly drive project execution across multiple teams and functions., • Experience with life science instrumentation, lab automation, robotics, or complex electromechanical systems., • Strong engineering judgment with the ability to identify risk early and push work to completion., • Excellent communication skills, especially explaining technical tradeoffs to cross-functional and executive stakeholders. Preferred Qualifications • Experience with robotic lab automation, motion control, or precision electromechanical systems., • Background in low-volume, high-mix instrumentation environments., • Familiarity with PLM or Stage Gate development models., • Experience working with suppliers, contract manufacturers, and design transfer., • Experience in a growth-stage or smaller company environment where process-building is part of the role. Additional Details • Competitive compensation that includes bonus eligibility., • Comprehensive benefits package, including voluntary medical, dental, vision insurance and 401(k) retirement plan., • This is an on-site position at our new headquarters in New Providence, NJ., • Occasional travel may be required.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description OrganOx is a commercial stage organ technology company dedicated to developing technologies to improve outcomes for patients with acute or chronic organ failure. The company was established as a spin out of the University of Oxford in 2008 and is now part of the Terumo Group. OrganOx is a pioneer in normothermic machine perfusion (NMP). It's flagship platform, the metra®, is available for use in the U.S., Europe, Canada, and Australia. It has been utilized in over 7,000 liver transplants to date to keep donor livers in a metabolically active state outside the body enabling longer preservation times and functional assessment of the organ prior to transplant, leading to an increased number of organs available for transplant. Founded in 1921, Terumo Corporation (TSE:4543) strives to fulfill its mission of “Contributing to Society through Healthcare” by providing a comprehensive range of solutions in the fields of therapeutic procedures, hospital operations, and life sciences in more than 160 countries and regions. Position Summary OrganOx is in the process of expanding its engineering capability and is seeking an enthusiastic Product Engineer to join the Product Engineering team. As part of a small multi-disciplinary Product Engineering team, the successful candidate will have responsibility for activities focused on the existing product range in the following areas; · Support the implementation and verification of design changes on the existing product range, to introduce new features and functionality and drive continuous improvement. · Work closely with the operations team in resolving component obsolescence, manufacturing issues, or complaints on the existing OrganOx product.This will require close partnership with field-based Customer service, Operations, and Quality teams. · Supporting the creation of assembly and test instructions required by the Operations team and suppliers, to ensure the transfer of designs to production are delivered in accordance with design change and operational SOPs. · Working closely with Product Development and Innovations teams throughout development projects with a focus on supporting design reviews and design transfer activities. The ideal candidate will have a background in relevant science or engineering discipline. The successful candidate will work within a small, multi-disciplinary team of engineers, including electronics, mechanical and software development. The post holder will support activities relating to design changes and develop test strategies to ensure all changes are effectively implemented. The candidate requires excellent written and verbal communication skills to document their activities in line with the ISO13485 Quality Management System, planning and reporting on their work to a standard suitable for review by regulatory authorities. Listed below are the key responsibilities of the role and a brief description of some of the key tasks to be performed. Major Responsibilities The Product Engineer will be responsible for: · Contributing to design changes to support product, production and quality improvements. This includes conducting problem-solving efforts and root cause analysis. · Investigating device performance issues, determining, and reporting the root cause (in collaboration with the quality, service and operations departments), and recommending corrective actions. · Interpreting and understanding the product’s intended use, clinical procedures, customer needs and design inputs. · Creating and/or refining engineering documentation, such as the Design History File and the Device Master Record. · Following, learning, and contributing to R&D procedures, such as failure analysis, design controls and risk management, per the Quality Management System. · Assisting prototyping efforts and bench testing. · Prepare reports and conclusions for presentation. · Ensuring compliance with design and development procedures and ensuring all associated documentation is complete in accordance with ISO 13485 and local procedures. Requirements Skills and Experience The Product Engineer will have: · Demonstrable experience within Product Engineering/Product Development, preferably within medical devices or another highly regulated industry. · Experience with electro-mechanical devices, with understanding of how to drive, interface with and troubleshoot devices. · Ability to design, implement and carry out experimental test plans for electro-mechanical, fluid components, sub-systems, and complete safety-critical systems. · Ability to produce technical reports to a high standard both in terms of technical content, presentation, and written English. · Enthusiasm, good communication skills and ability to work effectively in a multi-disciplinary team. · Ability to work effectively with outside suppliers and manufacturers. · Ability to work across and manage a range of projects or tasks simultaneously. Qualifications The Product Engineer will have: Essential: · A degree or equivalent qualification/experience in Electronic, Mechanical, Biomedical, or general engineering, or other relevant disciplines. · Demonstrable years of experience of working in a similar role. A job description does not imply that the duties stated are the only ones to be performed by the job holder. Postholders will be required to follow any other job-related instruction as reasonably requested by their line manager or their designate. Benefits We offer competitive compensation and comprehensive benefits available from day one, including health, dental, vision, disability coverage, and flexible spending accounts. Additionally, we offer a 401(k)-retirement plan with company matching after 90 days, paid time off, holidays, and additional leave benefits, as well as employee discounts and access to our onsite wellness facility. OrganOx supports work-life balance and provides opportunities for ongoing professional development.

Job Description We’re hiring a bilingual (English/Spanish) Operations Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all manufacturing site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Operations Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Operations Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ full-plant management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job DescriptionDescription: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Requirements: Key Responsibilities: Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization., • Flexible working environment that promotes work-life balance. Join us and become a crucial part of a forward-thinking team dedicated to crafting high-quality metal stamped products that not only meet industry standards but also exceed customer expectations through innovation, precision, and excellence in design. Work Environment: This position will primarily be based in an office/manufacturing plant setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to jmartinez@precisonxmfg.com

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Immediate Opening for a Forensic Engineer/ Structural Professional Engineer to work in our Warren, NJ location in charge of forensic investigations and expert witness testimony. The Forensic Engineer is responsible for leading and managing forensic investigation, report preparation and expert testimony (in deposition and trial) specifically for community association transitions, construction, claims and ensuring the successful delivery of projects within scope, budget and timeline. DUTIES & RESPONSIBILITES: Special Requirements Technical • Able to serve as an expert witness and depositions, mediations, or litigation, • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies/defects., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Reviews and interprets drawings, codes, specifications, project manuals, material specifications, etc., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Interprets and specifies a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities, • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations, and drawings., • Oversee and assist in the development and review of technical specifications, drawings, and construction documents. Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches., • Coordinates the recordation of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Client Relations • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team • Works closely with the team to direct and provide the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: Education • Bachelor’s degree from a four-year college or university in Structural/ Civil Engineering. Work Experience • Four plus years of experience in the architectural and engineering consulting industry., • Must have experience as an expert witness. Licenses & Certifications • Professional Engineer license required., • OSHA 10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Estimated salary range for this position is $90,000 to $170,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs. Height and Access Equipment • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights. Outdoor Environment • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind. Mobility • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR 2ARqcfr7S2

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Troubleshoot and correct BMS integration issues. Requirements • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80K-$135K/yr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Job Summary: Attalon is seeking a Senior Principal Electrical Engineer to lead the design of complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock sources and FPGAs, multilayer and matched RF signals with high isolation. Provide technical leadership to less experienced electrical engineers across the organization. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications., • Lead the design of high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs and monitor PCB layouts., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Work with circuit layout subcontractors and board population subcontractors, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business., • Provide technical advice to less experienced electrical engineers., • Oversee work assignments across a small team of hardware engineers. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 15+ years of circuit design experience or Master’s degree with 12+ years’ experience, or Ph.D. with 9+ years’ experience Skills: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Strong background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Experience with programmable logic devices and control system circuit design., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Knowledge of circuit board thermal and EMI management., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Experience with government defense design processes., • Self-motivated, responsible, team player with leadership experience. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices., • · Travel to project job sites will be expected. Skill Requirements: Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • This role requires project related travel. Benefits: • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking a Principal Electrical Engineer to design complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock generators, matched RF signals and FPGA complexes. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications with minimal oversite., • Design high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs., • Work with circuit layout and board assembly subcontractors., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 9+ years of circuit design experience or Master’s degree with 7+ years’ experience, or Ph.D. with 4+ years’ experience Skills Required: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Experience with programmable logic devices and control system circuit design., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Self-motivated, responsible and team player. Desired: • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Knowledge of circuit board thermal and EMI management, and ESD protection, • Experience with government defense design processes. Equal Opportunity Employer Statement: Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance: This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Patuxent Engineering, LLC is seeking a Senior Structural Engineer for our NYC/NJ Office located in Metuchen,NJ. Ideal candidate should have relevant experience in concrete, steel, and foundation design, as well as Mechanical Methods. Patuxent Engineering, LLC provides construction engineering and support services in the high rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Preferred candidate PE or Pending PE(EIT). Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design, • Must be Authorized to work in the US Preferred Qualifications: It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Overview The Mechanical Engineer PE I applies standard engineering techniques to design, analyze, test, maintain, repair, or improve products, components, or assemblies. Responsibilities • Responsible for signing and sealing engineering documents., • Analyzes, develops and evaluates systems., • Improves and maintains current systems or creates brand new projects., • Designs and drafts blueprints, visits systems in the field and manages projects., • Applies engineering techniques and analyses within the scope of the assignment., • Performs work under general supervision., • Handles complex issues and problems, and refers only the most complex issues to higher-level staff. Qualifications • Bachelor's degree in Engineering and Professional Engineer License (preferred), • 4+ years of experience, • Possesses working knowledge of the subject matter, • Critical thinking skills, • Problem solving skills, • Mathematic skills, • Computer skills, • Technical expertise, • Effective verbal and written communication skills, • Detail oriented and willing to tackle various ongoing projects in a fast-paced environment

Job DescriptionJob Summary: Immediate Opening for a Civil Engineer to work in our Warren, NJ office location. Work Experience • 5+ years’ minimum experience required in Engineering, Construction Management and/or a combination of related education and experience., • Experience with site/civil work including: stormwater/drainage, asphalt and concrete pavement, grading/topography, MSE wall, or other related site features, etc. Estimated salary range for this position is $90,000 to $150,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license Licenses and Certifications • Professional Engineer (P.E.) license required, or ability to obtain within 1-year of hire., • OSHA 10 hour certified preferred, otherwise must complete within three months from date of hire, fees covered by Company., • Must have or be able to obtain an unrestricted valid Driver’s License. Job responsibilities would include: • Conducting site evaluations and prepare investigation reports., • Preparing design documents including construction drawings, bid documents and technical specifications related to site/civil projects which may include: stormwater/drainage, asphalt or concrete pavement, grading/topography, MSE wall, or other related site features, etc., • Recording field measurements and performing civil engineering calculations related to the noted project types., • Preparing quantity takeoffs and cost estimates., • Representing clients in obtaining and evaluating bids and awarding construction contracts., • Managing site/civil construction projects:, • Monitoring contractors work for conformance to project construction documents, drawings, and specifications., • Working as our client’s representative on site during work., • Reviewing and approving change orders., • Knowledge of local and state building codes, and ability to apply to work., • Familiarity with local jurisdictional permitting processes and requirements for site/civil project impacts, such as: wetlands, land disturbance, E&S control, pervious/impervious drainage, etc., • Collecting post-project feedback to look for issues and opportunities for improvement., • Work closely with teams to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Perform other related duties as assigned.This position will be balanced between the field on job sites and in the office to help prepare construction documents and reports. Qualifications Education • Bachelor’s degree in Civil Engineering from an accredited four-year college or university or equivalent experience.Skills, • Ability to perform technical civil engineering calculations and design construction drawings /documents with limited oversight., • Excellent written and verbal communication skills., • Excellent computer skills with proficiency in MS Office Suite., • Strong organizational skills and the ability to handle multiple projects at one time., • Ability to interact in a professional manner with clients and colleagues., • AutoCAD proficiency (preferred)., • Ability to work individually or with team members and work collaboratively with other disciplines., • Ability to work in the field and to travel outside local areas as required., • Provide exceptional customer service. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. Employee Benefits We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include: • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program., • Workers Compensation. Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR tXi1P1LtEo

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Modeling to join our team. The Energy Engineer (Energy Modeling) will perform whole-building energy simulations to support design decisions, code compliance, certification programs, and decarbonization planning. This role focuses on accurate, well-documented building energy models that translate design intent into actionable energy and cost insights. Responsibilities • Perform Whole-Building Energy Modeling: Develop baseline and proposed energy models in eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP for new construction, major renovation, and retrofit projects., • Drawing and Specification Review: Review architectural, mechanical, electrical, plumbing, and envelope documents to identify model inputs, including geometry, constructions, occupancy, lighting, plug loads, HVAC systems, and operating schedules., • Code Compliance and Certification Modeling: Produce ASHRAE 90.1 Appendix G performance-path models, IECC compliance models, and certification submissions for LEED EAp2/EAc1, ENERGY STAR, Passive House, and similar programs., • Support Local Decarbonization Compliance: Develop models supporting compliance with local laws and stretch codes (e.g., NYC Local Law 97, Title 24, Boston BERDO, Washington Clean Buildings Act)., • Parametric and Design Optimization Studies: Run parametric analyses on envelope, HVAC systems, controls, and renewable energy options; quantify life-cycle cost and carbon impacts to support design decisions., • Calibrate Existing Building Models: Calibrate energy models against utility billing or interval data per ASHRAE Guideline 14 standards for retro-commissioning, deep retrofit, and ESPC projects., • Renewable Energy Modeling: Support photovoltaic, solar thermal, geothermal, and battery storage modeling using tools such as PVsyst, SAM, and integrated simulation tools., • Generate Technical Reports: Author energy modeling reports, narratives, and exhibits suitable for clients, design teams, certification reviewers, and authorities having jurisdiction. Requirements • Bachelor's in engineering (Mechanical, Architectural, Electrical, or Facilities) or Building Science, • 1-3 years of energy modeling experience, including at least one internship, co-op, or full-time role, • Hands-on experience with at least one of: eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP, • Working knowledge of ASHRAE 90.1 (especially Appendix G), ASHRAE 62.1, and applicable energy codes (IECC, Title 24, state stretch codes), • Understanding of HVAC system types, controls, building envelope, and renewable systems, • Familiarity with LEED energy modeling submission requirements preferred, • Strong Excel skills; experience with Python, Ruby, or scripting against modeling tools is a plus, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, BEMP, CEM, or LEED AP BD+C credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionThe Role: Director of Building Envelope Location: Warren, NJ SUMMARY We are seeking a motivated Director of Building Envelope Project Engineer with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Estimated salary range for this position is $135,000 to $180,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Assist in troubleshooting construction issues with contractors based on engineering judgment Field Responsibilities • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Work on multiple field projects involving roofing, cladding, waterproofing, decks, balconies, and structural rehabilitation. Client Relations & Business Development • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach., • Represent The Falcon Group at technical seminars, networking events, continuing education sessions, and industry meetings. Supervisory Responsibilities This position currently has supervisory duties but may evolve based on growth and performance. Qualifications Licenses & Certifications • A Professional Engineering (PE) or a Registered Architect (RA) is needed., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Minimum of 10 years of experience with an engineering consulting firm, building envelope firm, structural engineering practice, or construction industry performing structural/envelope-related work. Education • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Master’s degree is a plus but not required. Skills & Additional Requirements • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus., • Familiarity with CSI MasterSpec or technical specification writing preferred.Physical Demands, • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain.Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details This Principal Mechanical Engineer must be a highly experienced technical leader responsible for driving innovation and leading the development of advanced mechanical and optical systems, including laser systems, bulk optics, and fiber optic technologies, for aerospace and defense applications. This role oversees all phases of product development—from conceptual design and prototyping through manufacturing and deployment—while ensuring efficient systems integration and high-performance solutions. The position requires deep expertise in opto-mechanical and photonic systems, hands-on experience with fiber-optic technologies and laser systems, and a proven ability to lead cross-functional teams and mentor the next generation of engineers. A key focus is the delivery of cost-effective, cutting-edge solutions designed to operate in demanding environments such as terrestrial and space applications. Responsibilities • Lead the design and development of advanced optical and mechanical systems: Oversee the engineering of large-scale mechanical systems and opto-mechanical subsystems, including bulk optics, laser systems and fiber optic assemblies. Support the design and development of optical support structures, thermal management, and alignment interfaces while packaging delicate optics for demanding military environments for both prototyping and production-level solutions., • Perform and oversee preliminary analysis: Conduct and guide initial structural, thermal, and environmental analyses to validate mechanical and optical system designs. Provide insights to address application challenges, such as heat dissipation in solid-state laser systems, stress management in fiber optic assemblies and secure mounting that can withstand launch into space or operation on ground and airborne platforms. Participate in risk-reduction efforts through breadboards, prototypes, and subscale testing to refine and optimize designs., • Drive innovations in the opto-mechanics of laser systems: Lead the development of innovative opto-mechanics for fiber, diode-pumped solid-state and semiconductor lasers. Deploy the latest thermal management, fiber processing, and optics-mounting techniques and materials to develop innovative solutions., • Manage detailed engineering designs: Support systems engineering in the decomposition of system-level specifications into sub-system and component-level requirements. Develop, review, and release detailed CAD models, part and assembly drawings, and tolerance analyses to support manufacturable and reliable designs. Ensure compliance with GD&T, ASME Y14.5, and other industry design standards for laser systems, bulk optics, and fiber optic assemblies., • Oversee full product lifecycle development: Direct product development activities from concept through production and deployment. Collaborate with optical, mechanical, electrical, and systems engineering teams, ensuring the seamless integration of fiber optics, laser systems, and precision mechanical elements. Lead efforts to meet rigorous environmental and performance requirements in industrial and high-reliability applications., • Collaborate with vendors and manage supply chains: Assist the management of relationships with vendors, including sourcing, qualification, and quality oversight, to ensure the reliable delivery of components for fiber optic and photonic systems. Provide leadership in technology transfer projects, both domestic and international, to establish scalable manufacturing processes and optimize efficiency., • Lead assembly, integration, and testing efforts: Oversee mechanical aspects of product assembly and integration processes, ensuring precise alignment of optical components, fiber handling systems, and laser systems with mechanical designs. Develop tooling, work instructions, and test plans for robust and efficient assembly and system validation. Oversee performance testing on opto-mechanical systems to meet optical, mechanical, and thermal requirements., • Provide technical leadership and mentorship: Serve as a subject-matter expert on the mechanical aspects of laser and fiber optic systems, offering strategic guidance and technical direction to resolve complex engineering challenges. Actively mentor junior engineers and cross-functional team members, fostering technical growth, collaboration, and innovation across the organization. Minimum Qualifications • Education and Work Experience: A Bachelor’s degree in mechanical engineering or a related field, with 10-12 years of relevant experience., • Opto-Mechanical System Design and Integration: Extensive experience in the design, development, and integration of advanced optical, fiber optic, and laser systems, including bulk optics, optical assemblies, and opto-mechanical components for industrial or military applications., • Fiber Optic Product Development: Expertise in fiber optic technologies, including splicing, cleaving, tapering, recoating, and alignment. Proven ability to develop innovative manufacturing processes and systems for fiber handling, in-situ assembly, material curing, and high-precision optics applications., • Mechanical and Thermal Analysis: Proficient in conducting and guiding preliminary structural, thermal, and environmental analyses using FEA and related methods during the design process, with an emphasis on optimizing designs for manufacturability, cost-effectiveness, and system reliability., • CAD Modeling and Design Standards: Extensive experience with CAD tools (SolidWorks is preferred), including high-fidelity part and assembly modeling, detailed drawing creation, tolerance analysis, and adherence to industry standards such as GD&T, ASME Y14.5, MIL specs, and ASTM standards., • Product Lifecycle Management: Strong track record of managing the full product lifecycle—from conceptual design and prototyping to manufacturing, qualification, and deployment—for opto-mechanical and photonic systems in industrial applications., • Systems Engineering and Cross-Functional Collaboration: Demonstrated ability to lead and collaborate with multidisciplinary teams, including optical, electrical, systems, and controls engineers, to deliver integrated solutions for complex engineering challenges., • Innovation in Advanced Photonics & Laser Systems: Experience driving innovation in laser systems, bulk optics, and photonic products while leveraging advanced technologies for applications in industrial R&D and precision manufacturing., • Assembly, Integration, and Validation: Expertise in product assembly, integration, and testing processes, including the development of tooling, manufacturing processes, and detailed test plans. Skilled at conducting performance validation against stringent optical, mechanical, and environmental requirements., • Leadership and Mentorship: Recognized for providing hands-on mentoring and technical leadership to junior engineers and cross-functional teams, fostering a culture of collaboration, innovation, and professional growth. Preferred Qualifications • Education and Work Experience: Master’s degree with 8-10 years experience, or Ph.D. with 7+ years experience)., • [Lean Manufacturing and DFMA: In-depth knowledge of Lean Manufacturing principles, DFMA techniques, and process optimization for high-precision manufacturing, enhancing efficiency and reducing costs., • Vendor Management and Global Technology Transfers: Expertise in sourcing, qualifying, and managing vendors, as well as overseeing cost control, ensuring quality assurance, and leading international technology transfer to enable scalable and cost-efficient manufacturing operations., • Technical Program Management: Proven experience managing technical programs and projects, driving progress on strategic initiatives, aligning cross-functional teams, managing timelines and budgets, and ensuring successful product delivery., • Technical Expertise in Photonics and Optics: Broad understanding and application of photonics, laser systems, fiber optics technologies, and bulk optical systems in high-performance aerospace and defense related R&D environments. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionSalary: $70k-85k Position Overview The Field Engineer is a critical member of our growing Engineering department at GRA Design Studio, responsible for performing detailed on-site investigations that support project feasibility, engineering decisions, and design development. This role focuses primarily on conducting MEP-focused engineering site surveys, capturing existing conditions, and identifying system-related constraints. The Field Engineer will also support due diligence analysis based on field observations and assist with production work as needed to ensure project continuity and team flexibility. Key Responsibilities MEP-Focused Site Surveys & Field Assessments • Conduct thorough on-site MEP field surveys, documenting existing mechanical, electrical, plumbing, fire protection, and related building systems., • Capture accurate measurements, field notes, and photographic documentation to support engineering and architectural teams., • Identify system deficiencies, capacity considerations, code-related issues, and potential design or construction challenges., • Coordinate site access, interact with building personnel, and ensure all field data is collected safely and efficiently. Due Diligence & Analysis • Perform due diligence evaluations informed by on-site observations, focusing on system conditions, risks, and feasibility., • Prepare clear and concise due diligence reports summarizing findings, system impacts, and recommendations., • Assist in verifying compliance with applicable codes and standards related to MEP systems and existing building conditions., • Communicate findings to internal engineering and design teams to support scoping, planning, and decision-making. Production & Project Support • Drafting, documentation updates, and production tasks in AutoCAD, Revit, and other software., • Incorporate field findings into engineering drawings, coordination sets, and project documents., • Support engineers and architects with redlines, revisions, and project coordination., • Provide flexibility across fieldwork, analysis, and production based on project workload and departmental needs. Qualifications • Bachelors degree in Engineering, Architecture, Construction Management, or related field preferred., • 13 years of experience in field engineering, MEP surveys, construction, or similar technical roles., • Working knowledge of building MEP systems, existing facility evaluations, and construction processes., • Proficiency with field equipment, digital measuring tools, and drafting platforms (AutoCAD required; Revit a plus)., • Strong documentation skills and attention to detail in fast-paced field environments., • Ability to work independently at job sites and collaborate effectively with engineering, architectural, and project management teams., • Clear communication skills, with the ability to present technical findings to both technical and non-technical audiences. Core Competencies • MEP Field Investigation, • Technical Assessment & Problem-Solving, • Time Management & Organization, • Clear Written & Verbal Communication, • Cross-Disciplinary Collaboration, • Adaptability & Flexibility Work Environment • Frequent travel to project sites required., • Work may include indoor, outdoor, active construction, or existing facility environments., • Occasional office-based work for reporting, coordination, and production tasks. Benefits: • Health, dental, & vision insurance, • Paid time off & Holidays, • Career growth opportunities & professional development assistance (Amber Books subscription, additional PTO for ARE prep & testing), • Retirement plan (401K with up to 3% match), • Collaborative team dynamic, • Extracurricular activities (sports clubs, bowling leagues, etc) & company events, • Wellness activities and benefit offerings, • Flex scheduling, • Hybrid work environment

Job DescriptionSalary: Minimum - $100,000 annual Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Qualifications - Bachelor’s degree in Mechanical Engineering - Professional Engineer (PE) license required - Minimum of 10 years of relevant experience in HVAC design - Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e. Ranked among the nation's top A/E firms

As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We're a technology company that leads with our humanity-driving our business priorities alongside meaningful social, community, and societal impact. Join Ciena's Non-Coherent Datacenter Interconnects Team as a Product Engineer! Are you ready to shape the future of high-quality, high-volume optical products? Ciena's Non-Coherent Datacenter Interconnects team is seeking an experienced Product Engineer to drive innovation and excellence in delivering complex optical and electrical interconnect products (Vesta and Nitro product portfolio). Be part of a dynamic environment where your expertise will make a tangible impact from design through prototyping and into manufacturing. This is an onsite role in New Jersey. How You Will Contribute: As a Product Engineer, you will focus on developing and optimizing high-speed, cost-effective optical solutions tailored for hyperscale data centers and enterprise networks. Collaborate with R&D, New Product Introduction (NPI), and Operations to ensure the successful delivery of non-coherent optical products that meet the unique demands of modern datacenter environments, including high capacity, low latency, and energy efficiency. Utilize your skills to rollout and manage products and their lifecycles, oversee assembly & test requirements compliance and support product reliability qualification. Key Responsibilities: • Support product development and optimization for manufacturing optical and electrical interconnect products., • Collaborate with R&D and Operations teams to define manufacturing requirements and assembly specifications., • Develop and document processes, tools, and workflows to enable seamless product transitions into production., • Drive process automation and create automation tools to enhance efficiency., • Transition designs into Contract Manufacturers (CMs) and facilitate on-site support for training, quality, and delivery., • Work with diverse global teams and interact with CMs and vendors to ensure alignment on processes, quality, and delivery schedules., • Own product bill-of-materials (BOM) and their lifecycle changes The Must Haves: • Bachelor's degree in Optical, Electrical, Mechanical, Production Engineering, or equivalent., • Minimum 5 years of experience in optical/electronics manufacturing or product engineering., • Proven track record of launching complex optical/electronic products to market., • Knowledge of fiber optic transmission and associated testing methodologies., • Experience owning product BOMs thru product lifecycle management software (Agile) a must, • Ability to create and manage automated processes, automation tools, and data analysis tools., • Hands-on experience with fiber optic assembly, handling, and splicing., • Strong problem-solving skills and effective written and oral communication abilities., • Capacity to collaborate with cross-functional teams and CMs globally across time zones. Nice to Haves: • Advanced degree in Optical/Electrical/Mechanical/Production Engineering or equivalent., • Experience with specialty and ribbon fiber splicing., • Prior experience debugging complex optical assemblies., • Familiarity with high-pressure environments and remote issue resolution., • Strong organizational and project management skills., • Experience working with multi-functional, multi-locational teams. Pay Range: The annual pay range for this position is $110, 400 - $176, 400 Pay ranges at Ciena are designed to accommodate variations in knowledge, skills, experience, market conditions, and locations, reflecting our diverse products, industries, and lines of business. Please note that the pay range information provided in this posting pertains specifically to the primary location, which is the top location listed in case multiple locations are available. Non-Sales employees may be eligible for a discretionary incentive bonus, while Sales employees may be eligible for a sales commission. In addition to competitive compensation, Ciena offers a comprehensive benefits package, including medical, dental, and vision plans, participation in 401(K) (USA) & DCPP (Canada) with company matching, Employee Stock Purchase Program (ESPP), Employee Assistance Program (EAP), company-paid holidays, paid sick leave, and vacation time. We also comply with all applicable laws regarding Paid Family Leave and other leaves of absence. At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination. Ciena is anEqual Opportunity Employer, including disability and protected veteran status. If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require.

Job Description Company Description Engineering Driven Design PC provides expert engineering services with a focus on simplifying the engineering process for clients. The company specializes in HVAC, electrical, plumbing, and fire protection engineering services, ensuring minimal client involvement in managing the engineering aspects of construction projects. By leveraging its broad knowledge base, Engineering Driven Design adds significant value to construction projects, emphasizing efficiency and reliability. Position Overview We are seeking a Senior Electrical Engineer with 3–6 years of experience in building systems design who is ready to take technical ownership of projects and play a key role in delivering high-quality, coordinated electrical designs. This position is ideal for an engineer who has progressed beyond basic production work and is comfortable leading electrical design efforts, coordinating directly with other disciplines, and supporting client and contractor communication. This is a full-time, in-office role based in Iselin, NJ. ⸻ Key Responsibilities • Lead the design of power distribution, lighting, and low-voltage systems for commercial, institutional, and industrial projects, • Perform and oversee load calculations, short circuit analysis, equipment selection, and system sizing, • Develop and review single-line diagrams, panel schedules, lighting layouts, and technical specifications, • Ensure compliance with NEC and applicable codes and standards, • Coordinate closely with mechanical, structural, and architectural disciplines, • Identify and resolve design conflicts proactively, • Review and guide junior staff in drawing production and technical accuracy, • Support construction administration efforts including submittals, RFIs, and field coordination, • Communicate effectively with clients, contractors, and utility providers ⸻ Qualifications • Bachelor’s degree in Electrical Engineering (required), • EIT certification required, • PE license preferred or actively pursuing licensure, • 3-6 years of experience with an engineering consulting firm or electrical contractor, • Demonstrated experience leading electrical design on projects from concept through construction, • Strong working knowledge of NEC and applicable building codes ⸻ What Sets You Apart We are looking for an engineer who: • Takes ownership of their projects and stands behind their work, • Thinks beyond minimum compliance toward practical, buildable solutions, • Anticipates coordination issues instead of reacting to them, • Is comfortable making sound technical decisions, • Wants to grow into increased technical authority and long-term leadership within the firm ⸻ Technical Requirements • AutoCAD proficiency (required), • Revit experience (strongly preferred), • Experience with power system analysis software is a plus ⸻ Growth Opportunity This role provides the opportunity to expand technical leadership, mentor junior team members, and increase involvement in client coordination and project delivery strategy over time.

Qualifications Bachelor's degree in Mechanical Engineering Professional Engineer (PE) license required Minimum of 10 years of relevant experience in HVAC design Proficiency in AutoCAD, Revit, Microsoft Excel, Word, Teams and HVAC design software (e.

The LiRo Group is seeking a Sr.Mechanical Engineer in Edison, NJ to lead the design and development of HVAC systems across various sectors.The ideal candidate will have a Bachelor's degree in Mechanical Engineering and a PE license.With over 10 years of HVAC design experience, you will perform load

Sr Design Engineer Bachelor's Degree in Engineering, preferably in Aerospace, Mechanical, or a related field A minimum of 10 years of experience in design engineering, preferably in the aerospace industry Proficiency in Solidworks, AutoCAD, and Inventor An in-depth understanding of GD&T principl

The role involves applying engineering techniques to design, analyze, and test various components. Candidates should have a Bachelor's degree in Engineering, a PE license, and 4-6 years of experience. ENFRA LLC is seeking a Mechanical Engineer PE I in The Ironbound, New Jersey.

Our client is seeking a skilled Mechanical Engineer to oversee and enhance manufacturing processes within a high precision, machine shop environment.This role requires an individual who can develop, evaluate, and improve manufacturing methods by leveraging their knowledge of product design, material

Key Responsibilities Lead mechanical design of custom automated machinery , robotic work cells, and special-purpose equipment from concept through final build Design automation systems incorporating robotics, vision-guided systems, conveyors, precision mechanisms, servo motion, and integrated cont

Job DescriptionJob Summary: We are seeking an energetic, Electrical Design Engineer with experience in Autocad design experience in our Warren, NJ office. The ideal candidate will have exceptional working knowledge of building design with emphasis on multifamily residential, and mixed -use high rise, hospitality and commercial. The Electrical Design Engineer is responsible for performing various types of inspections, testing, and producing plans, specifications and reports for clients. This is a technical and managerial position that requires providing solutions and managing projects from start to finish, through all project phases ranging from feasibility studies and conceptual design, schematic design, construction documents and construction administration, bidding and project close-out. Estimated salary range for this position is $60,000 to 80,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable Responsibilities and Duties: • Visiting project sites to analyze and document existing mechanical, plumbing, fire protection, and electrical conditions., • HVAC equipment selections., • Boiler plant design., • Chiller plant design., • Ductwork sizing and layout., • Pumping and piping system design and layout., • Air conditioning and heating load calculations., • Preparation of design and construction documents., • Cost estimate preparation., • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Oversee and assist in the development and review of technical specifications, drawings and construction documents. Client Relations, • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Foster strong client relationships, ensuring effective communication and understanding of project requirements and objectives. Internal Team, • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success., • Mentor and support junior team members, fostering their professional growth and development.SUPERVISORY RESPONSIBILITIES:, • This position has no supervisory responsibilitiesQualifications Education • Bachelor’s degree from a four-year college or university in Electrical Engineering. Work Experience, • Two plus years of experience in the electrical engineering consulting industry. Licenses and Certifications, • Professional Engineer license or an E.I.T are pluses., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Valid United States Driver’s License required, as this position requires travel to and from client sites. Skills, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR uE9smhnMkQ

Bachelor’s degree in Mechanical Engineering. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Strong knowledge of mechanical codes, energy efficiency standard

Syneos Health/ inVentiv Health Commercial LLC is seeking a Project Manager I to support high-impact oncology and gene therapy trials.This role focuses on managing trials from startup to closeout, ensuring compliance while coordinating with various stakeholders.Ideal candidates should have clinical t

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Mechanical Engineering. Strong knowledge of mechanical codes, energy efficiency standard

Bachelor's degree in construction management, Engineering, Architecture, or a related field.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Mechanical Engineering. Strong knowledge of mechanical codes, energy efficiency standard

The Design Engineer (DE) is a member of the bespoke event spaces and multipurpose rooms team and a supporting contributor to the support of client design projects. Contributor for complex engagements and works directly with clients and the Design Engineering team to develop specifications, designs,

This is a 6-Month CONTRACT with the potential to convert to full-time and is 2 days/week ONSITE in Monmouth County NJ*.Robert Half's client, a pharma/healthcare agency, is seeking a.MUST HAVE: previous pharma agency or Med Ed experience.This role is a mix of Project Management & Account Management r