Mechanical design engineer jobs in White Plains, New YorkCreate job alerts

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our White Plains, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Mechanical Engineer - Valhalla, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing commercial HVAC mechanical systems specifically for cooling mission critical data center computer rooms. They will have experience with heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for complex facility design projects, • Create Conceptual Designs gathered from meeting with the client, • Oversee Commissioning Process as needed, • Work with Business Development Team to respond to RFPs as needed, • 3-7 years experience designing data center cooling systems, • PE or EIT a plus, • LEED a plus, • Bachelor's Degree in Mechanical Engineering or Equivalent, • Experience with Mechanical Systems (HVAC , CFD [Fluid Dynamics], Boilers, Chillers, Pumps, CRAC / CRAH Units, Air Handling Units, etc.), • Equipment sizing and calculations, • Experience reviewing work in REVIT; Trane Trace or IES VE Energy Modeling software a plus, • Familiar with the design process of building systems for mission critical projects or healthcare / hospital required, • Effective Communicator – emails, phone and face to face, • Ability to work independently After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Mechanical Engineer - Elmsford, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing commercial HVAC mechanical systems specifically for cooling mission critical data center computer rooms. They will have experience with heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for complex facility design projects, • Create Conceptual Designs gathered from meeting with the client, • Oversee Commissioning Process as needed, • Work with Business Development Team to respond to RFPs as needed, • 5-10 years experience designing data center cooling systems, • PE or EIT a plus, • LEED a plus, • Bachelor's Degree in Mechanical Engineering or Equivalent, • Experience with Mechanical Systems ( HVAC , CFD ( Fluid Dynamics ), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ), • Equipment sizing and calculations, • Experience reviewing work in REVIT; Trane Trace or IES VE Energy Modeling software a plus, • Familiar with the design process of building systems for mission critical projects or healthcare / hospital required, • Effective Communicator – emails, phone and face to face., • Ability to work independently After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description The Role: Controls Engineer Description: Are you a dynamic thinker? Do you gravitate towards sensory technologies and their application? Do you have a strong understanding of both electro-mechanical engineering and software? Do you like interaction design? If you answered the above questions affirmatively you may be a fit for this position. We are seeking someone deeply interested in control systems engineering ranging from basic pneumatic and sensory measurement to complex automation projects. The role is in constant collaboration within the controls team as well as between software and mechanical engineering. My client is an equipment manufacturer that engages in both bench-top inspection solutions as well as large-scale automated systems. The primary focus of the position is to ensure the measurement accuracy of the system, reliable operation through control systems design, and development of efficient user interactions with the equipment through HMIs and other graphical means. A secondary focus is on the development of sensory technologies and how they apply to package inspection. The role is positioned on our R&D team, focused on the development of new applications and custom engineering to help support the food, medical device, and pharmaceutical industries with leading-edge engineering and a focus on critical packaging applications. The employee will be responsible for designing, selecting, and implementing components and developing the logic for proprietary technologies. The position will be responsible for programming, documenting, training, and release testing of finalized technologies for the various industries we support. Some travel, both domestic and international, is expected. Keywords: PLC/HMI Programming (Beckhoff, SAIA, Allen-Bradley) (structured text, instruction list, ladder logic and function block) Automation Robotic Controls and Theory (Staubli, Yaskawa) Sensor integration (pneumatic, electrical, vision, etc) Wiring Design (AC and DC circuits) Quality GMP/GDP Teamwork Critical Thinking & Effective decision making Requirements: • 3+ years of job experience, • Bachelor’s degree or higher in a relevant field, • Must have legal permission to work in the U.S. and have a valid passport.

Job Description Fire Protection Engineer General Firm Description OLA Consulting Engineers, PC is a mid-sized consulting engineering firm with offices in New York City and Westchester County, NY. Established in 1974, OLA Consulting Engineers, PC is a financially secure company that has a longstanding reputation of excellent engineering, a solid base of repeat clients, and a growing list of new clients. Our firm provides mechanical and electrical design services, energy modeling/analysis, and commissioning services for commercial, industrial and institutional facilities. We place special emphasis on high performance building design and energy efficient systems. Our projects include new construction, retrofits, and renovations. As the continuing education and development of our team is paramount in our effort to deliver innovative engineering solutions, OLA provides excellent mentoring and on-site, as well as off-site, training for continuous skill enhancement. For additional information, please visit our web site at . Job Description OLA has an immediate need for fire protection engineers [PL1] with five to eight (5-8) years of U.S. Consulting experience in fire protection system design services including but not limited to water-based and non-water-based systems, fire pumps, and fire alarm systems. The candidate shall be responsible for conducting building code reviews and analyses, performing and reviewing hydraulic calculations. The candidate will be expected to work closely and coordinate with teams in both the NYC and Westchester Offices and be available in both offices as needed. Responsibilities will include field investigation, analysis, design, production of contract documents, management and direction of junior engineers, construction administration services, and project management services. The candidate shall be able to work on multiple projects and must have great communications skills for relating to clients, other design professionals, contractors, vendors and his/her peers. Qualifications: • Minimum: Bachelor of Science in Mechanical Engineering or Fire Protection Engineering., • Five to Eight years of US Consulting Engineering experience will be considered., • Familiarity with New York State and New York City codes as well as International Building Codes, • PE Preferred, or ability to obtain., • Experience in fire protection sprinkler and standpipe system design and performing hydraulic calculations in accordance with applicable codes and standards., • Experience in the preparation of construction documents including floor plans and specifications., • Experience conducting building code analyses, on-site investigations and inspections., • Working knowledge of AutoCAD required, knowledge of Revit a plus, • Demonstrated capabilities in professional service business processes., • Excellent oral and written communication skills. At OLA, we provide a very competitive compensation and benefits package. The following is a partial list: • Medical, dental, vision and prescription plans, • Disability and Life insurance plans, • 401(k) with employer contributions, • Profit sharing, • Competitive salary, • Overtime pay, • Tuition assistance, • Continuing professional development, • Paid Vacation, • Paid Holidays, • Paid Sick/Personal time Job Type: Full-time Pay: From $36.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Professional development assistance, • Tuition reimbursement, • Vision insurance Schedule: • Monday to Friday Education: • Bachelor's (Required) Experience: • AutoCAD: 1 year (Required), • Revit: 1 year (Preferred) Work Location: In person

Job Description JOB TITLE: Electrical Engineer Co-Op LOCATION: Hawthorne, NY (on-site) TYPE: Co-Op (January 2026 – August 2026) COMPENSATION: $23.50/hr - $40.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Electrical Engineer Co-Op will play a key role in supporting the design, development, and testing of electrical systems and components for Clarapath's advanced electro-mechanical device, SectionStar™. This role requires hands-on experience in electrical engineering, circuit design, and troubleshooting, as well as the ability to collaborate with cross-disciplinary teams of engineers. The ideal candidate will assist in creating and refining electrical schematics, testing prototypes, and optimizing electrical performance to support the growth of the company's product offerings. We are looking for a proactive, detail-oriented team player who is eager to learn and contribute to the development of innovative solutions in a dynamic and fast-paced environment. Responsibilities: • Assist in the design, testing, and validation of electrical systems for SectionStar™, • Develop and refine electrical schematics, PCB layouts, and wiring diagrams, • Troubleshoot and resolve electrical issues in prototypes and production units, • Collaborate with mechanical, software, and firmware engineers to integrate electrical components into the overall system, • Perform testing and validation of electrical hardware to ensure compliance with industry standards and specifications, • Document findings, design iterations, and test results to support ongoing development efforts, • Pursuing a Bachelor’s or Master’s degree in Electrical Engineering or a related field, • Understanding of circuit design, PCB layout, and electrical schematics, • Hands-on experience with electrical testing equipment (oscilloscopes, multimeters, etc.), • Strong problem-solving skills and attention to detail, • Excellent teamwork and communication skills, • Ability to work in a fast-paced, collaborative environment, • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining Miller Proctor Nickolas, Inc, you're more than an employee, you're an Employee Owner.

Job Description We currently are looking for qualified candidates in our White Plains, NY office locations to work on Energy and Commissioning projects for our Building Engineering Division. LaBella’s Building Engineering Departments provides our employees a collaborative, professional working environment, allowing for personal growth and responsibility on a variety of significant projects that serve our target markets. The Energy & Commissioning engineer will work with other engineers and project managers as part of a project team to support the development of concepts, strategies, designs, drawings, specifications and reports for new Building and Renovation projects with an Energy and/or Commissioning focus. Responsibilities • Perform energy audits and feasibility studies to identify Energy Conservation Measures., • Complete utility data analysis and evaluation of energy usage., • Perform basic energy savings calculations, making educated assumptions when applicable and using / interpreting data gathered from the field to estimate savings., • Develop design concepts in technical documentation. May assist with mechanical design projects as required., • Able to interpret complex plans and specifications and apply available information to ensure that all project design requirements are satisfied., • Plan, perform and document the commissioning of various Mechanical and Electrical Systems to ensure the intended operation., • Conduct on-site investigation and inspection of multi-discipline projects., • Takes a lead role in resolving construction problems, procedures, and methods., • Minimum 5 years of relevant job experience., • Bachelor of Science in Mechanical Engineering (or equivalent), • Obtained or in pursuit of a NYS PE License., • Energy and/or Commissioning certifications from industry organizations is a plus (CEM, CBCP, BCxP, BEAP, etc.), • Functional working knowledge of M/E/P/FP, building automation systems as well as system design and construction processes., • Proficient with building modeling software programs. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description A multi-discipline engineering firm with over 70 years in business is looking for a Wastewater Discipline Engineer for their White Plains, New York office! Responsibilities: • Use technical knowledge/experience to lead projects, • Manage projects from planning/design to construction of wastewater conveyance systems (pipelines, pump stations storage, and end-of-pipe treatment facilities), • Prepare, review, and approve project drawings, specifications, schedules, and cost estimates, • Lead construction documents/specifications development, • Manage engineering services during construction, • Coordinate project tasks with other disciplines, • Develop medium/large planning and design projects, • Prepare complete construction packages, • Create/manage cost estimates and project schedule, • Complete tasks on schedule and within budget, • Prepare detailed engineering calculations and analysis, • Assist with business development (proposal development/preparation and client management), • Meet/exceed client expectations, • Mentor/train junior staff Requirements: • Bachelor’s degree in civil, environmental, chemical or mechanical engineering or related field of study, • 8+ years of experience in the planning, design, and construction of wastewater conveyance systems, • Prior experience in process design, treatment plants upgrades and pump station design, • Experience writing/developing proposals, • Experience utilizing design software to solve complex issues, • PE License, • Strong data analysis and technical problem solving experience Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description MECHANICAL HVAC ENGINEER Consulting Engineering Firm in White Plains, New York has an immediate opening for a Mechanical Engineer with a minimum 3 years experience in Heating Ventilating and Air Conditioning. Our firm provides Design Engineering Services to Owners and other Design Professionals in the Tri-State area. We serve a wide variety of clients including Residential, Commercial, Industrial, Recreational and Institutional projects. The applicant should possess a Design Engineering background in HVAC with strong organizational and communication skills and the ability to multi-task. AutoCad experience and drafting proficiency is required. Position is ideal for a team oriented individual interested in an exciting working environment. Benefits include Medical and Profit sharing plans. If you are looking for a long term position at an awesome company we are the place for you!!! Salary is based on Experience. Company DescriptionMechanical EngineerMechanical Engineer

Job Description Position Summary: We are seeking a highly motivated Automation/Validation Engineer with expertise in Computer System Validation (CSV), equipment validation, and automation systems. The role involves supporting commissioning, qualification, and validation (CQV) activities across equipment, facilities, and utilities, ensuring compliance with GMP regulations. Hands-on experience with Kneat (e-validation platform), DeltaV DCS, and preparation/execution of validation deliverables (URS, FAT, SAT, IQ/OQ/PQ) is required. Key Responsibilities: Validation & Documentation Author, review, and execute validation documentation including User Requirement Specifications (URS), Functional Specifications, Design Qualification (DQ), FAT, SAT, IQ, OQ, and PQ. Manage validation lifecycle documentation using Kneat. Perform risk assessments (FMEA, GxP impact assessments, traceability matrices). Automation Systems (DeltaV & others) Support automation projects involving DeltaV Distributed Control Systems (DCS), PLCs, and SCADA systems. Collaborate with automation and process engineering teams to ensure system integration, configuration, and qualification. Troubleshoot and support control system operations during commissioning and validation. Equipment & Utility Validation Execute validation protocols for GMP manufacturing equipment, laboratory instruments, facilities, and utilities (e.g., purified water, clean steam, HVAC, compressed gases). Support equipment qualification from FAT/SAT through operational readiness. Ensure systems meet regulatory requirements (FDA, EMA, ICH, Annex 11, 21 CFR Part 11). Compliance & Quality Ensure adherence to company quality standards and global regulatory requirements. Support audits and inspections by providing validation and automation documentation. Drive continuous improvements in validation strategies and procedures. Qualifications & Skills: Bachelor’s degree in Engineering (Automation, Electrical, Mechanical, Chemical, or related field). 3–7+ years of experience in automation engineering, CSV, or equipment validation within a GMP-regulated environment (biotech/pharma/medical device). Proficiency with Kneat Gx for electronic validation document management. Hands-on experience with DeltaV DCS and automation systems. Strong knowledge of validation lifecycle (URS, DQ, FAT, SAT, IQ/OQ/PQ). Familiarity with facilities & utilities systems (water systems, clean utilities, HVAC). Strong understanding of GAMP 5, 21 CFR Part 11, Annex 11, and FDA/EMA guidelines. Excellent technical writing, problem-solving, and communication skills. Preferred Experience: Experience in biologics, sterile manufacturing, or API facilities. Knowledge of MES, LIMS, and other GMP computerized systems. Prior involvement in CQV projects and capital projects.

Job Description JOB TITLE: Electrical Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $110,000 - $140,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Electrical Engineer will play a key role in the design, development, and integration of electrical systems for Clarapath’s advanced electro-mechanical medical device, SectionStar™. This position is essential for supporting PCB design, wiring schematics, power systems, and embedded hardware components, while ensuring seamless integration with mechanical and software subsystems. The ideal candidate will have a strong foundation in hardware electrical design and a working knowledge of software development for embedded systems. We’re looking for a hands-on, detail-oriented team player who thrives in a fast-paced environment and views electrical engineering as a critical driver of innovation in medical device development. Responsibilities: • Design and develop system-level electrical schematics, including electrical isolation strategies, detailed PCB layouts, wiring harnesses, and power distribution networks for SectionStar™, • Design precision electromechanical components and assemblies using CAD tools to support integration with hardware systems, • Build and assemble cable harnesses and prototype analog and digital circuits, primarily for sensor integration and device control, • Develop low-level device control software, including experience programming in C++ and working with FPGA-based systems for embedded control and signal processing, • Model and develop complex electrical systems throughout the device, such as stepper and DC motor control, AC power systems, low-voltage data lines, and high-sensitivity analog and digital circuits, • Support prototyping, unit, and system-level testing of electrical hardware, including building test fixtures instrumented with data acquisition system, • Troubleshoot and resolve hardware issues throughout development and manufacturing phases to ensure device reliability and manufacturability, • Participate in design reviews, risk assessments (ex: FMEA), and create documentation such as schematics, wire harness drawings, PCB files, and component specifications to support FDA regulatory processes, • Assist in the development and maintenance of test procedures, validation protocols, and compliance documentation, • Contribute to continuous improvement initiatives by identifying opportunities to enhance system performance and streamline manufacturing, • Bachelor’s degree in Electrical Engineering or a related field; Master’s degree preferred, • 5+ years of experience in electrical design, preferably within medical device development or regulated industries, • Proven design record with competency in designing large electromechanical system components, including high-sensitivity analog and data systems, power conditioning for motors and high inrush current components, • Experience designing embedded hardware such as microcontrollers and FPGAs, with exposure to software/firmware programming in C++, • Proficiency with PCB design tools and electrical CAD software (Altium Designer preferred, Eagle acceptable), • Strong analytical and problem-solving skills, including modeling, simulation, and hands-on lab bench experience (soldering, wiring, troubleshooting, and use of test equipment), • Familiarity with Linux systems and microprocessors, • Proficiency in Microsoft Office applications including Excel, PowerPoint, and Word, • Excellent interpersonal, verbal, and written communication skills, • Effective time management skills with the ability to prioritize and meet deadlines in a fast-paced, multidisciplinary environment, • Ability to work independently and collaboratively within a team, • Flexibility to adapt to changing priorities and drive to meet aggressive milestones and deadlines, • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays)., • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Job Description JOB TITLE: Mechanical Engineer Co-Op LOCATION: Hawthorne, NY (on-site) TYPE: Co-Op (January 2026 – August 2026) COMPENSATION: $23.00/hr - $32.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Mechanical Engineer Co-Op will play a key role in supporting the design, development, and testing of mechanical components for Clarapath’s advanced electro-mechanical device, SectionStar™. This role requires a strong foundation in mechanical engineering principles, CAD modeling, and hands-on prototyping, contributing to the refinement and optimization of system performance. The ideal candidate will assist in designing mechanical assemblies, conducting validation tests, and collaborating with a cross-disciplinary team of engineers to ensure seamless integration of mechanical and electrical systems. We are looking for a proactive, detail-oriented team player who thrives in a fast-paced, rapidly growing environment. Responsibilities: • Assist in the design, prototyping, and validation of mechanical components for SectionStar™, • Develop and refine CAD models, mechanical drawings, and assembly documentation, • Conduct testing and analysis to evaluate mechanical performance and reliability, • Collaborate with electrical and software engineers to integrate mechanical systems, • Support manufacturing and assembly processes by providing technical guidance, • Document findings, design iterations, and test results to support product development, • Pursuing a Bachelor’s or Master’s degree in Mechanical Engineering or a related field, • Proficiency in CAD software (e.g., SolidWorks, Creo, or similar), • Hands-on experience with mechanical prototyping and testing, • Strong understanding of materials, manufacturing processes, and mechanical design principles, • Excellent problem-solving skills and attention to detail, • Ability to work collaboratively in a cross-functional team environment, • Competitive salary, commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays), • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Job DescriptionSenior Electrical Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionSenior Mold Designer & Toolmaker Location: Westchester County NYEmployment Type: Full-Time Position OverviewWe are seeking an experienced Senior Mold Designer & Toolmaker to join our aerospace and defense electronics manufacturing team. This critical role supports the production of ultra-miniature transformers, inductors, power supplies, and magnetic components for military, aerospace, and mission-critical applications. The successful candidate will design and fabricate precision tooling for components that operate in extreme environments, from Mars rovers to submarine systems, requiring exceptional reliability and miniaturization expertise. Key ResponsibilitiesDesign & Engineering • Design and develop ultra-precision injection molds and tooling for miniature magnetic components, • Create tooling for transformer housings, inductor enclosures, and power supply modules with dimensions as small as 0.31" x 0.31" x 0.34", • Develop micro-molding solutions for components operating from -55°ree;C to +130°ree;C temperature ranges, • Design tooling for hermetic sealing applications requiring 100% vacuum impregnation processes, • Engineer solutions for molding around delicate magnetic cores, windings, and electronic assemblies, • Create precision tooling for surface mount and through-hole magnetic component packaging, • Design automated potting and encapsulation systems for extreme environment protectionUltra-Miniature Component Manufacturing, • Fabricate tooling for components with wire gauges as fine as 52 AWG (less than 0.001" diameter), • Develop solutions for molding magnetic shields and EMI suppression components, • Create precision fixtures for high-voltage applications up to 10,000V ratings, • Design tooling for power components ranging from 0.75W to 300W in ultra-compact packages, • Engineer solutions for military-grade reliability requirements (MIL-PRF-27, MIL-STD-202), • Support manufacturing of components for QPL (Qualified Products List) certificationAdvanced Precision Manufacturing, • Execute micro-machining operations for ultra-miniature component tooling with tolerances to ±0.0001", • Operate CNC machining centers for precision cavity work in transformer and inductor molds, • Manage wire EDM processes for intricate details in magnetic component housing tools, • Implement specialized surface finishing for optimal magnetic field performance, • Maintain dimensional accuracy for components requiring 300+ thermal cycle reliability, • Execute precision assembly and testing of complex multi-cavity tooling systemsMilitary & Aerospace Quality Standards, • Ensure all tooling meets stringent military and aerospace manufacturing standards, • Implement quality control processes for components destined for fighter aircraft, spacecraft, and submarine systems, • Support manufacturing processes for components used in guidance systems and space applications, • Maintain traceability and documentation requirements for defense contractor specifications, • Coordinate with quality assurance for first article inspection and ongoing production validation, • Support customer audits and certification processes for aerospace and defense applicationsSpecialized Manufacturing Processes, • Design tooling for vacuum impregnation and potting processes unique to magnetic components, • Develop solutions for handling and molding magnetic materials and ferrite cores, • Create automated systems for precise winding insertion and core placement, • Engineer tooling for specialized lead configurations (gull wing, J-lead, surface mount), • Support manufacturing of components for harsh environments including space, underwater, and high-vibration applicationsQualifications:Technical Skills, • CAD/CAM Systems: Advanced proficiency in SolidWorks, MasterCam, and precision design software, • Micro-Machining: Expert-level skills in ultra-precision CNC programming and operation, • EDM Operations: Extensive experience with wire EDM for micro-scale component features, • Materials Science: Understanding of magnetic materials, ferrites, potting compounds, and high-temperature plastics, • Quality Systems: Knowledge of MIL-STD standards, QPL requirements, and aerospace quality protocols, • Measurement Systems: Proficiency with CMM, optical measurement, and micro-dimensional inspectionEducation, Training & Qualifications, • Required: Technical diploma/certificate, completed apprenticeship, or equivalent hands-on training, • Preferred: Technical degree in Mechanical Engineering, Manufacturing Engineering, or Materials Science, • Minimum 10+ years of progressive experience in precision mold design and toolmaking, • Specialized training in magnetic component manufacturing or aerospace electronics preferred, • Familiarity with defense contractor requirements and security protocols preferred, • Experience with magnetic component design and electromagnetic field considerations, • Competitive salary commensurate with experience ($90,000 - $100,000+ depending on qualifications and clearance level), • Comprehensive health, dental, and vision insurance with premium coverage, • 401(k) retirement plan with generous company matching, • Performance-based bonuses tied to mission-critical program success

Job Description Job Description Job Title: HVAC Design Engineer Location: Mount Vernon, New York Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: ICE AIR is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a Design Engineer with a strong mechanical engineering background to join our product development team. This role focuses on the design, modeling, and development of HVAC systems and components. The ideal candidate is creative, detail-oriented, and enjoys working through the entire design cycle—from concept development and CAD modeling through prototyping, testing, and final production release. You will collaborate closely with cross-functional teams including manufacturing, supply chain, and sales to deliver high-performance HVAC solutions that meet customer and regulatory requirements. Key Responsibilities: • Design and develop new HVAC products and components, with emphasis on innovation, energy efficiency, and manufacturability., • Create detailed 3D CAD models and engineering drawings (SolidWorks or similar) for new designs and product improvements., • Support prototype development, assembly, and validation testing., • Work with various regulatory and industry organizations for testing and certifications, • Work with offshore and internal engineering teams to coordinate design and development efforts., • Work with sales, marketing, manufacturing, finance, supply-chain and other departments Required Skills • Strong CAD design skills utilizing SolidWorks or similar CAD experience, • Bachelor's degree in mechanical engineering or similar field, • 2 to 5 years of working in the HVAC industry, manufacturing, electronics, or similar industries, • Team player, • Structured and organized mindset, • Excellent professional communication skills, • Understanding of thermodynamics, heat transfer, and fluid mechanics as applied to HVAC systems., • Strong analytical and problem-solving skills with the ability to balance theoretical and practical considerations., • Ability to work with minimal supervision, • Familiarity with electronic controls or system integration., • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.

Job Description JOB TITLE: Systems Engineer LOCATION: Hawthorne, NY (on-site) TYPE: Full time, regular COMPENSATION: $140,000 - $165,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Systems Engineer will play a key role in the design, integration, and optimization of Clarapath’s advanced electro-mechanical medical device, SectionStar™. This position is essential for driving cross-functional alignment, troubleshooting complex system-level issues, and ensuring seamless integration between hardware, software, and production workflows. The ideal candidate will have a deep understanding of systems engineering principles, a strong analytical mindset, and experience working within regulated environments. We’re looking for a collaborative team player who sees system-level design and development as a key competitive advantage in advancing medical device innovation. Responsibilities: • Develop and maintain system-level architecture and requirements for SectionStar™, • Lead integration of electrical, mechanical, software, and firmware subsystems, • Translate customer and clinical requirements into clear, testable system specifications, • Collaborate with R&D, manufacturing, and quality teams to ensure smooth design transfer and system verification, • Identify and resolve system-level issues through root cause analysis and structured troubleshooting, • Manage interface definitions, risk analyses (ex: FMEA), and design documentation, • Support regulatory submissions by generating system-level documentation and participating in design reviews, • Bachelor’s degree in Systems Engineering, Mechanical Engineering, Electrical Engineering, or related field; Master’s degree preferred, • 8+ years of experience in systems engineering or cross-disciplinary product development, • Strong understanding of product lifecycle management, risk analysis, and V&V processes, • Hands-on approach to integration and problem solving; experience working closely with manufacturing and testing environments, • Excellent analytical and communication skills, • Experience in medical devices or regulated industries, a plus (FDA, ISO 13485, etc.), • Competitive salary will be commensurate with experience and education, • Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays)., • A collaborative and diverse work environment where our teams thrive on solving complex challenges, • Ability to file IP with the company, • Connections with world class researchers and their laboratories, • Collaboration with strategic leaders in healthcare and pharmaceutical world

Join a diverse team of architects, manufacturing engineers, and industrial designers responsible for the design, development, and product validation of prefabricated MEP components.

Job Description Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hoursBelow is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Company Overview: At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters . We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation to make the communities we serve more sustainable and livable. Our mission is to offer the best combination of multi-modal sharing technology and seamless customer service, so users can unlock joy in their day! We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own solutions. Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. De

Requires bachelor's degree in civil engineering/closely related + 2 years of relevant experience.

Degree in Mechanical Engineering, Manufacturing Engineering, or related field preferred. Senior CNC Manufacturing Engineer. Collaborate with engineering, production, and R&D to optimize machining strategies.

The SPM shall develop strong collaborative approaches and work closely with Space Planning, Operations, IT/AV, Security and User teams to promote and enable clear and effective communication and team centric leadership, integrating internal teams with consultant design teams throughout the design an

Ability to provide drafting, detailing, specifications, and modeling support including, but not limited to, design presentations, schematic design, design development, construction documentation, field coordination, and as-built documentation. In this role, you will help support commercial construct

The SPM will be responsible to lead design teams and Construction Managers in both the pre-construction due diligence, design and scoping process with a focus on quality management, project controls, and user engagement as well as leading their teams through the bidding and construction administrati

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Links Technology is currently seeking a motivated and skilled.Project Manager (Pre-Clinical Development).Our client is a leading Pharma/Biotech firm.This is a long-term contract role offering a hybrid work schedule of 4 days onsite.Responsibilities of the Project Manager Project Manager (Pre-Clinica

Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. The SPM will be responsib

Education and Experience:Bachelor’s degree in Mechanical, Plastics, or related Engineering field. Process Engineer (95-120K) We have an excellent opportunity available for a Process Engineer in the Utica/Rome, NY area. Analyze process data to design and implement improvements that reduce variabili

The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. The SPM will be responsible to lead design teams and Construction Managers in both the pre-construction due diligence, design and scoping process with a focus on quality management, projec

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

One of the leading commercial glass companies with multiple locations in South Carolina.Specializing in storefronts, curtain walls, entrance systems, and replacement glass.Always looking for highly qualified, motivated individuals to join their growing team and offering competitive pay, excellent be

The SPM shall develop strong collaborative approaches and work closely with Space Planning, Operations, IT/AV, Security and User teams to promote and enable clear and effective communication and team centric leadership, integrating internal teams with consultant design teams throughout the design an

Degree in Mechanical Engineering, Manufacturing Engineering, or related field preferred. Senior CNC Manufacturing Engineer. Collaborate with engineering, production, and R&D to optimize machining strategies.

Requires bachelor's degree in civil engineering/closely related 2 years of relevant experience.

Bachelor's degree in Construction Management, Civil Engineering, or a related field.

Links Technology is currently seeking a motivated and skilled.Project Manager (Pre-Clinical Development).Our client is a leading Pharma/Biotech firm.This is a long-term contract role offering a hybrid work schedule of 4 days onsite.Responsibilities of the Project Manager Project Manager (Pre-Clinica

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. This role offers the chance to combine your civil engineering expertise with meaningful projects that enhance p

Ability to provide drafting, detailing, specifications, and modeling support including, but not limited to, design presentations, schematic design, design development, construction documentation, field coordination, and as-built documentation. In this role, you will help support commercial construct

Our medicines and pipeline are designed to help patients with eye diseases, allergic and inflammatory diseases, cancer, cardiovascular and metabolic diseases, neurological diseases, hematologic conditions, infectious diseases, and rare diseases. If youre a student pursuing a Undergraduate or Graduat

One of the leading commercial glass companies with multiple locations in South Carolina.Specializing in storefronts, curtain walls, entrance systems, and replacement glass.Always looking for highly qualified, motivated individuals to join their growing team and offering competitive pay, excellent be

If you're a student pursuing a Undergraduate or Graduate degree in Supply Chain, Industrial Engineering, Business Analytics, or related majors, you may be a fit for an internship in our General and Administrative, Global Procurement, or Industrial Operations and Product Supply organizations.

Links Technology is currently seeking a motivated and skilled.Project Manager (Pre-Clinical Development).Our client is a leading Pharma/Biotech firm.This is a long-term contract role offering a hybrid work schedule of 4 days onsite.Responsibilities of the Project Manager Project Manager (Pre-Clinica

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Optimizes productivity by designing, implementing and testing new procedures.

Links Technology is currently seeking a motivated and skilled.Project Manager (Pre-Clinical Development).Our client is a leading Pharma/Biotech firm.This is a long-term contract role offering a hybrid work schedule of 4 days onsite.Responsibilities of the Project Manager Project Manager (Pre-Clinica