Mechanical design engineer jobs in Syracuse, NYCreate job alerts

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: * Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. * Conduct RF system-level analysis, link budget calculations, and trade-off studies. * Select and integrate components such as mixers, amplifiers, oscillators, and filters. * Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. * Conduct laboratory testing, tuning, and validation of RF modules against specifications. * Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. * Support troubleshooting and root cause analysis for performance anomalies. * Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. * 5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). * Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). * Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) * Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). * Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. * Experience with PCB design for RF and microwave circuits. * Familiarity with military or aerospace standards for RF systems is a plus. * US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: * Knowledge of phased-array radar architectures. * Electronics packaging concepts * Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Syracuse, NY Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Interact closely with mechanical, civil, structural engineers and project architects, • Function as lead electrical engineer for multi-discipline projects, through all phases (proposal, design, bidding and construction)., • Perform code reviews., • Delegate and monitor project tasks to junior team members., • Meeting with external and internal clients., • A Bachelor’s degree is required., • A minimum of 10 years of experience working at an A/E consulting firm is required., • New York State Professional Engineer’s license is preferred., • AutoCAD and Revit experience is a plus., • Experience in electrical distribution systems, power, lighting, and utilities, as well as communications, security, and fire alarm systems are desired. Salary range: $100,000.00 - $135,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Senior Laboratory Technician Job Description Non-Exempt / Hourly Summary (Position Description): BITZER Scroll Inc. is looking for a Senior Laboratory Technician that has a strong mechanical aptitude, is energetic and detail-oriented. In this exciting role, you are collaborating with a team of colleagues from engineering design and development to fabricate, assemble and test prototype compressors. You will also work together with production assembly and quality to execute a laboratory audit test program on production compressors to ensure conformance to strict performance requirements. Through laboratory development testing and production auditing, you will help us to continually improve and maximize the satisfaction of our customers. As a senior-level member of the Engineering Lab staff, you will also be expected to assist in training and development of less experienced technicians and engineers. You may also assist in leadership tasks such as work coordination, team communication and cross-departmental activities on a infrequent basis, as dictated by workload and staffing. Reports To: Engineering Lab Manager Pay: $25.00 - $34.50 per hour Schedule: Monday-Friday, 40 hours per week, 7:00 AM to 3:30 PM, infrequent overtime Duties and Tasks: • Work cross-functionally with design and engineering to fabricate, assemble and test prototype compressors for evaluation of reliability, manufacturability and cost effectiveness., • Modify components and assemblies using basic laboratory tools (i.e. screwdrivers, torque wrenches, presses, dial indicators, etc.)., • Efficiently and accurately execute compressor assembly and test instructions maintaining meticulously detailed records., • Conduct compressor tests using test stands and calorimeters that simulate real world HVAC systems., • Diagnose HVAC system behavior by monitoring and adjusting refrigerant charge levels to insure test parameters are stable., • Use oscilloscopes, thermocouples, instrumentation and data acquisition systems to gather data., • Assist laboratory engineer with test equipment maintenance and gage calibration. BITZER, established in 1934, provides innovative products and services for the refrigeration and air-conditioning market. Our global team of over 4000 employees delivers products that are focused on customer satisfaction. Perfection and precision shape our operations, efficiency and sustainability are our ways of thinking. BITZER Scroll Inc., a subsidiary of BITZER established in 2006, is a development and production facility located in Syracuse, NY. We are a team of over 150 people, designing, laboratory testing, machining, and assembling scroll compressors for the global commercial air-conditioning market. Preferred Qualifications: • Strong diagnostic skills in refrigeration and air-conditioning systems, compressors and components, • Strong organizational, verbal and written communication skills, • Strong desire to maintain detailed, meticulous records, • Proficient use of basic hand and power tools to assemble and fabricate with skill and dexterity, • Working knowledge of brazing and electrical wiring, • General knowledge of oscilloscopes, data acquisition systems and instrumentation techniques, • General knowledge of 5S principles and good housekeeping practices, • High school diploma with 13 years of experience in HVAC, • EPA 608 Universal certification, • Strong mechanical aptitude and interest in mechanical devices; detail-oriented · You will work in a professional office and engineering test laboratory environment. You will use standard office equipment, basic hand tools, power tools and highly specialized laboratory test equipment. · You will be on your feet in the engineering test laboratory for the majority of your work day. We will provide you with the appropriate personal protection equipment (PPE). · You may be required to lift up to 40 pounds. · There will be limited domestic travel required for training and personal development. Physical Demands: · While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, bend, stoop, use hands, and reach with hands and arms. May be required to lift up to 50 pounds. This position requires that the employee be on their feet in the laboratory for the majority of the work day. Employee Benefits: Employer paid Life Insurance, Short-Term and Long-Term Disability Benefits $7.50 a week health insurance coverage 3% Employer 401K contribution Other Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This Job Description does not imply an employment contract. BITZER Scroll is an at-will employer. BITZER Scroll is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. Requirements:

Job DescriptionTitle: Transmission Line EngineerLocation: REMOTE (EAST COAST, will be traveling to NY for meetings and once per month to Syracuse, NY)Up to $170k Overview:Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct HireBenefits: Medical, Dental, Vision, 401k, Tuition Reimbursement, PTO, Holiday Pay Job Summary: • As a Sr. Principal Transmission Line Engineer, you'll be instrumental in bringing high-voltage transmission line projects to life. Your expertise will be essential in routing, designing, and executing complex projects ranging from 69kV to 500kV., • Job Duties:, • Technical Analysis: Conduct in-depth structural analysis, loading tree assessments, and wire sag/tension calculations to ensure optimal design., • Design Leadership: Develop comprehensive design criteria and specifications, guiding the team towards innovative and efficient solutions., • Quality Assurance: Oversee quality control reviews to maintain the highest standards of engineering excellence., • Client Collaboration: Foster strong relationships with clients and external stakeholders, ensuring project alignment and success., • Qualifications:, • Academic Excellence: Bachelor's degree in Civil, Structural, Mechanical, or Electrical Engineering from an accredited institution., • Professional Engineer (PE) licensure or ACTIVE preparation for the PE exam, • Proven Experience: Minimum of 5 years of hands-on experience in high-voltage overhead transmission line routing and design., • Technical Proficiency: Mastery of Power Line Systems software (PLS, PLS-CADD, PLS-POLE) for designing 69kV to 500kV overhead lines., • Foundation Expertise: In-depth knowledge of drilled pier foundation design., • Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Syracuse, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Syracuse, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job Description AAC (Advanced Automation Corporation) has a requirement for a Radar Field Service Engineer to support OCONUS installation and testing activities for the upgraded TPS-43 radar system. This position will begin with on-site OJT at the OEM in Syracuse, NY then on-site OCONUS, which would last multiple months at a time. This position requires strong leadership abilities to represent the company and the OEM while working with a cross-functional installation team. The chosen candidate will have the following duties and responsibilities: Responsibilities & Duties • Provide support for the assembly, test, and installation of upgraded TPS-43 radar systems, • Support system integration and testing, • Collaborate with cross-functional teams to support the in-country installation and training Minimum • Experience trouble shooting hardware, software, and mechanical problems., • Knowledge of radar signal processing techniques., • Experience with antenna design and optimization., • Knowledge of electromagnetic compatibility and interference., • Bachelor's degree in Electrical Engineering, Physics, or a related field., • 5+ years of professional experience in radar system design and development., • Strong analytical skills and experience with simulation tools., • Excellent written and verbal communication skills., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan - 401k with matching contributions, • Employer Paid Life Insurance (Basic), • FSA (Flexible Spending Account), • Generous Paid Time Off, • Paid Holidays (7 Paid Holidays), • AFLAC (Supplementary Insurance), • Tuition Reimbursement Program, • Situational Telework EEO Statement Advanced Automation Corporation is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, age, sexual orientation, gender identity, status as a protected veteran, or status as a qualified individual with a disability.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy & Commissioning team. LaBella’s Energy & Commissioning team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary range: $80,000.00 - $100,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Chipton-Ross is seeking a Manufacturing Engineer for an onsite contract opening in Syracuse, NY. REQUIREMENTS Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Bachelors Degree is Required. Prefer candidates with 10 years of industrial experience Aerospace Degrees are not eligible, this is not an Aerospace position. RESPONSIBILITIES Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Must be self-starter and take initiative on projects. Must work well with cross-functional teams. Green Belt and/or Lean Manufacturing understanding desired. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that improve product performance. May help incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations. DESIRED Hiring Manager would consider early career candidates with a Manufacturing, Mechanical, or Industrial Engineering Degree and at least 5-7 years of hands on experience Green Belt and/or Lean Manufacturing understanding desired. EDUCATION Bachelor's Degree is Required SHIFT 4/10 - 1st Shift

Job Description Quality Engineer Liverpool, NY Applies quality principles in the areas of: design, incoming material, production control, product evaluation, program performance, reliability, inventory control, and/or research and development as they apply to product or process quality for make and/or buy products. Performs technical evaluations including product requirements, specifications, models/designs, drawings and procedures. Collaborates with program management, engineering, manufacturing, supply chain and customers on quality related issues to ensure quality standards are in place. Engages in product failure investigations, material review board decisions and corrective/preventive action. Ensures corrective measures meet acceptable reliability standards and/or are compliant with requirements. Develops strategies and systems designed to improve internal and/or supplier performance and productivity. Evaluates quality systems for deficiency identification and correction. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts product quality tests, performs statistical analysis to assess products or materials that do not meet required standardsand specifications. Engages in supplier selection process and maintain certification programs. Basic Qualifications: • Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience, • Quality Engineering skills as related to electro-mechanical assembly operations including the ability to interpret engineering drawing/build instruction/process procedures and develop inspection processes and methodologies and determine product compliance., • Experience in performing Root Cause Analysis and identification of corrective actions using structured methods, such as DUO, Fault Tree Analysis, Fishbone Diagrams, DOE, etc., • Experience performing audits, and participating in third party/customer audits, • Use of MS Office (Word, Excel, PowerPoint), • Ability to obtain a secret clearance. Desired Skills: • DoD contract experience, • IPC 610/620 and J-STD-001 standard certification, • Experience interfacing with Government Customer Representatives, • AS9102 FAI experience, • Excellent communication skills, • ISO/AS9100 knowledge, • Ability to interface with multiple stakeholders including Military Customers, effectively work in cross-functional teams, and communicate with positive impact #ZR

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job DescriptionDescription: Job Summary: The Manufacturing Engineer position is quite varied regarding the scope of work performed. This position is responsible for creating and enhancing processes and systems by leveraging new technologies and automation. This position will research automation techniques, test new systems for efficiency and assist in the planning of factory layouts to optimize production. Requirements: Essential Functions of Position: • Work with design engineers to improve product design for ease of manufacturing and assembly., • Analyze production processes, schedules, methods and other data and then provide management with reports containing the data and statistics to enable management to better understand future requirements needed to improve/ optimize the manufacturing process., • Analyze and plan workflow, equipment placement and space requirements to improve manufacturing efficiency, • Analyze production data for improvement, • Coordinate equipment, maintenance and repairs to ensure manufacturers procedures and instructions are followed in order to keep production equipment operational., • Maintain manufacturing process documentation (SOP’s), including technical reports and process specifications, • Ensure quality is maintained, • Collaborate with other engineering resources to ensure efficient production, • The ideal candidate has a strong understanding of manufacturing equipment and processes, excellent problem-solving abilities, and a keen eye for detail., • Associates degree in relevant field with related work experience., • Knowledge of how mechanical systems and processes work., • Comfortable working in a fast-paced environment., • Exceptional organizational and time management skills, • Bachelor's in mechanical or industrial engineering, • Required to sit, stand, and walk; for up to 8 hours per day., • Ability to work in a high volume and high stress environment., • Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment., • Ability to lift up to 20 pounds occasionally., • Ability to communicate professionally, in written and oral communications.

JOB TITLE: Industrial Manufacturing Engineer. Provide guidance to engineering on design concepts and specification requirements to optimize manufacturing techniques and equipment use. Bachelors degree in Industrial Manufacturing or Mechanical Engineering (Required).

Senior Laboratory Technician Job Description Non-Exempt / Hourly Summary (Position Description): BITZER Scroll Inc. is looking for a Senior Laboratory Technician that has a strong mechanical aptitude, is energetic and detail-oriented. In this exciting role, you are collaborating with a team of colleagues from engineering design and development to fabricate, assemble and test prototype compressors. You will also work together with production assembly and quality to execute a laboratory audit test program on production compressors to ensure conformance to strict performance requirements. Through laboratory development testing and production auditing, you will help us to continually improve and maximize the satisfaction of our customers. As a senior-level member of the Engineering Lab staff, you will also be expected to assist in training and development of less experienced technicians and engineers. You may also assist in leadership tasks such as work coordination, team communication and cross-departmental activities on a infrequent basis, as dictated by workload and staffing. Reports To: Engineering Lab Manager Pay: $25.00 - $34.50 per hour Schedule: Monday-Friday, 40 hours per week, 7:00 AM to 3:30 PM, infrequent overtime Duties and Tasks: • Work cross-functionally with design and engineering to fabricate, assemble and test prototype compressors for evaluation of reliability, manufacturability and cost effectiveness., • Modify components and assemblies using basic laboratory tools (i.e. screwdrivers, torque wrenches, presses, dial indicators, etc.)., • Efficiently and accurately execute compressor assembly and test instructions maintaining meticulously detailed records., • Conduct compressor tests using test stands and calorimeters that simulate real world HVAC systems., • Diagnose HVAC system behavior by monitoring and adjusting refrigerant charge levels to insure test parameters are stable., • Use oscilloscopes, thermocouples, instrumentation and data acquisition systems to gather data., • Assist laboratory engineer with test equipment maintenance and gage calibration., • Perform daily housekeeping and organization to maintain a neat and orderly work environment. Who We Are: BITZER, established in 1934, provides innovative products and services for the refrigeration and air-conditioning market. Our global team of over 4000 employees delivers products that are focused on customer satisfaction. Perfection and precision shape our operations, efficiency and sustainability are our ways of thinking. BITZER Scroll Inc., a subsidiary of BITZER established in 2006, is a development and production facility located in Syracuse, NY. We are a team of over 150 people, designing, laboratory testing, machining, and assembling scroll compressors for the global commercial air-conditioning market. Preferred Qualifications: • Strong diagnostic skills in refrigeration and air-conditioning systems, compressors and components, • Strong organizational, verbal and written communication skills, • Strong desire to maintain detailed, meticulous records, • Proficient use of basic hand and power tools to assemble and fabricate with skill and dexterity, • Working knowledge of brazing and electrical wiring, • General knowledge of oscilloscopes, data acquisition systems and instrumentation techniques, • General knowledge of 5S principles and good housekeeping practices, • General knowledge of Microsoft Excel, Word, and Outlook Requirements: • High school diploma with 13 years of experience in HVAC, • EPA 608 Universal certification, • Strong mechanical aptitude and interest in mechanical devices; detail-oriented, • Excited to be part of a cross-functional team, self-motivated, energetic and willing to learn Work Environment: • You will work in a professional office and engineering test laboratory environment. You will use standard office equipment, basic hand tools, power tools and highly specialized laboratory test equipment., • You will be on your feet in the engineering test laboratory for the majority of your work day. We will provide you with the appropriate personal protection equipment (PPE)., • You may be required to lift up to 40 pounds., • There will be limited domestic travel required for training and personal development. Physical Demands: • While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, bend, stoop, use hands, and reach with hands and arms. May be required to lift up to 50 pounds. This position requires that the employee be on their feet in the laboratory for the majority of the work day. Employee Benefits: Employer paid Life Insurance, Short-Term and Long-Term Disability Benefits $7.50 a week health insurance coverage 3% Employer 401K contribution Other Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This Job Description does not imply an employment contract. BITZER Scroll is an at-will employer. BITZER Scroll is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.

Job DescriptionDescriptionThe HVAC Sales Engineer is responsible for driving profitable growth in our HVAC mechanical systems division. This role focuses on developing and securing projects with strong margin potential while building long-term service relationships with new and existing clients. The ideal candidate will combine technical HVAC expertise with consultative sales skills to deliver comprehensive building HVAC solutions. • Develop and secure profitable HVAC mechanical system projects while meeting quarterly and annual sales targets, • Partner with Property Managers, Builders, and owners to influence construction documents and building HVAC systems., • Create detailed technical proposals including system design, scope of work, and accurate cost estimates, • Provide technical guidance on HVAC design application solutions, • Conduct site surveys to assess existing building systems and recommend improvements, • Stay current with trends, energy codes, and HVAC industry regulations, • Develop and maintain relationships with mechanical contractors and consulting engineers, • Monitor project profitability and manage change orders for active projects, • Provide technical presentations and demonstrations of HVAC control solutions, • Technical Schooling or:, • Bachelor's degree in Mechanical Engineering or related field, • 3+ years of technical sales experience in commercial HVAC systems, • Strong understanding of HVAC mechanical systems, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Experience with construction documents and processes, • Knowledge of Project Management, • Familiarity with ASHRAE standards and building codes, • Experience in design-build HVAC projects

Job Description Currently hiring for Full-Time positions! Candidates must have weekend availability. Flexible hours available! Pay: At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $19—$19.50 USD

Key Responsibilities: Develop preliminary and final engineering plans for highway construction and improvement projects Design roadway elements including alignments, grading, drainage systems, and traffic-related features Provide technical guidance to junior team members and review design work for a

The SPM shall develop strong collaborative approaches and work closely with Space Planning, Operations, IT/AV, Security and User teams to promote and enable clear and effective communication and team centric leadership, integrating internal teams with consultant design teams throughout the design an

Bachelors degree in Construction Management, Architecture, Engineering, Drafting & Design, or a related field preferred. This dual-role position is ideal for someone who thrives in a design-focused, hands-on environment and is looking to grow in a fast-paced and collaborative setting. Collaborate wi

Strong knowledge of general construction principles, including mechanical, architectural, and civil disciplines.

Process Engineer (95-120K) We have an excellent opportunity available for a Process Engineer in the Utica/Rome, NY area. Education and Experience:Bachelor’s degree in Mechanical, Plastics, or related Engineering field. As a Process Engineer, you’ll work to develop and optimize processes that str

We are currently seeking early career professionals for multiple roles in Westchester County, Fairfield County and New Jersey.Fairfield County - Luxury Residential, Assistant Project Manager - Supporting PM on large scale estate projects (luxury residential single family mansions).Administrative wor

Strong knowledge of general construction principles, including mechanical, architectural, and civil disciplines.

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. The SPM will be responsib

Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. The SPM will be responsib

Key Responsibilities: Lead bridge design efforts, including load rating, structural analysis, and foundation design Prepare comprehensive design plans, technical specifications, reports, and cost estimates Provide technical guidance during construction, including responding to contractor questions a

Bachelor’s degree in Construction Management, Architecture, Engineering, Drafting & Design, or a related field preferred. This dual-role position is ideal for someone who thrives in a design-focused, hands-on environment and is looking to grow in a fast-paced and collaborative setting. Collaborate

Job Description: The State University Construction Fund (Fund) has multiple openings for a Design Project Manager to join our Design and Construction team at our office in Albany, NY. The Design Project Manager is responsible for managing capital projects for specific campuses from execution of a co

We are seeking an experienced Manufacturing Engineer to manage our chemical management system.

Job Description: The State University Construction Fund (Fund) has multiple openings for a Construction Project Manager to join our Design and Construction team at our office in Albany, NY. Provide assistance during the design phase as required. Working knowledge of applicable codes, laws, rules and

We are seeking an experienced Manufacturing Engineer to manage our chemical management system.

Key Responsibilities: Develop preliminary and final engineering plans for highway construction and improvement projects Design roadway elements including alignments, grading, drainage systems, and traffic-related features Provide technical guidance to junior team members and review design work for a

A growing civil construction and site development firm is seeking a hands-on Senior Project Manager to lead complex land development and municipal infrastructure projects.The ideal candidate has 10+ years of field-driven experience, with a background in sitework and utility-heavy scopes.This is a fu

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Optimizes productivity by designing, implementing and testing new procedures.

We are currently seeking early career professionals for multiple roles in Westchester County, Fairfield County and New Jersey.Fairfield County - Luxury Residential, Assistant Project Manager - Supporting PM on large scale estate projects (luxury residential single family mansions).Administrative wor

Develops Web solution by formulating objectives; planning project life-cycle deliverables and resource availability and application; preparing installation and modification specifications; leading the exploration, evaluation, and design of technical solutions. Implements Web solution by monitoring p

Key Responsibilities: Lead bridge design efforts, including load rating, structural analysis, and foundation design Prepare comprehensive design plans, technical specifications, reports, and cost estimates Provide technical guidance during construction, including responding to contractor questions a

Project Engineer Job Duties: Completes engineering projects by organizing and controlling project elements. Determines project specifications by studying product design, customer requirements, and pe

Advanced knowledge of project development stages, including siting, feasibility, conceptual design, Front End Engineering Design (FEED), procurement, and EPC delivery. Serve as a substation engineer, guiding and reviewing designs for medium and high voltage substation projects. Host and lead design

Implements Web solution by monitoring project progress; tracking action items; conducting design and implementation reviews; examining, researching, and resolving issues; escalating issues to appropriate authority; responding to team members' concerns; coordinating requirements with interested depar

Engineering background or working knowledge a plus.

Project Engineer Job Duties: Completes engineering projects by organizing and controlling project elements. Determines project specifications by studying product design, customer requirements, and pe

Bachelor's degree in Engineering, 7 years related experience, A minimum 2 years project management experience, Professional Engineer (PE) license, MS Office and MS Project experience is required (Access experience would be plus), Demonstrated leadership skills, An attitude and commitment to being an

Process Engineer Job Duties: Oversees and assesses existing processes and workflows. Optimizes productivity by designing, implementing and testing new procedures.

Project Cost Estimating Manager.Job Duration: Temp-to-Hire (after a min.Work Type: Onsite Project Industry: Semi-Conductor Industry.Job Description: Our client is hiring a Principal Estimator to support our growing manufacturing/industrial client base.In this position you will be part of.