Osha 10 jobs in Newburgh, New YorkCreate job alerts

Job DescriptionDescription: Construction Management Staff at West Point, NY. Education: 4 Year Accredited Degree in Construction Management with 10+ years of QA and Construction Management Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: USACE Record Management System Software systems currently used at Microsoft Office suite of products (Excel, Word, Adobe) Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Knowledge: USACE CQM Certified USACE Unified Facility Code, IBC Code, Uniform Compliance Code (UCC), Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Followup Phase as independent verification). USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus Work Duration: Fulltime. Normal business hours shall encompass the period of 0700 through 1630, Monday through Friday, except Federal holidays. Work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Based on work demand, overtime may be necessary and would occur on occasional weekends and during the daytime. Overtime should not exceed 15% of the total hours. Day-To-Day Construction Activities / Knowledge: The Contractor will be assisting in Charrette process, schematic reviews, design reviews and campus master planning efforts. Contractor will be reviewing A/E designs for compliance with USMA Master Plan, DPW's Engineering Planning Standard (EPS), and all other federal and state regulations and codes, including USDOI standards for historic preservation and SHPO consultation. Develop pre-final (or draft) Requests for Proposals (RFPs). The Contractor shall incorporate the scope of work, as-built drawings, sketches, and other appropriate documents provided from the USACE assigned Project Manager in the development of the RFP for user requested changed. Submit comments citing specific deficiencies and referencing correct information upon review of technical submittals from an installation perspective. Deficiencies shall include but are not limited to design flaws, incorrect citations, grammar, calculation errors, incorrect / missing procedures, and compliance to the construction contract and the relevant codes including federal and state regulations and West Point standards. Submit reports documenting compliance inspections. Inspections shall be performed to ensure compliance with installation requirements, applicable federal, state, and local regulations. Reports shall include but not limited to descriptions of observed tests, defects in structure, envelope, concrete, mechanical, electrical, plumbing, fire protection, fire alarm, and site work. Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. • Sound understanding of the overall supervision of construction operations. Sound understanding of engineering concepts, principles, and practices applicable to construction., • In conjunction with the Engineering Technician (ET), review Activity Hazard Analyses (AHAs) and ensure these are discussed by the construction contractor and their respective subcontractors prior to beginning each work activity or when a new work crew is to perform the work in accordance with the three phases of QC., • Capable of communicating at multiple levels of authority to obtain decisive action from all affected parties, including the Construction Contractor (Contractor), Supported Commands, and other Agencies., • Reviews pre-final contract drawings and specifications (including technical RFPs) with respect to constructability and compatibility with actual field conditions., • Participate in pre-award contract meetings, such as Functional Analysis Concept Development (FACDs) meetings and constructability reviews., • Coordinating post-award contract meetings, such as post-award kickoff meetings (as applicable), preconstruction conferences, partnering meetings, schedule acceptance meeting, design review meetings (as applicable and final inspections., • Review of contractor administrative submittals, such as schedules, environmental plan; design (as applicable) and construction quality control plan; health and safety plan; and accident prevention plan and shop drawings., • Visit construction sites to monitor progress and solicit input from the Engineering Technician/Quality Assurance (ET/QA) representatives, review CQC reports and attend QC meetings., • Provide project status updates to government staff including record inventory documents and Acceptance of Military Real Property and Disposal of DoN Real Property, in accordance with NAVFAC Business Management System (BMS). Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.)., • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications., • Must have valid driver’s license, valid vehicle registration, and valid insurance. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Candidate must successfully pass a pre-employment (post offer) background check, which includes a criminal background check. Requirements:

Job DescriptionDescription: Job Type Full-time West Point, New York Minimum Requirements: Education: Minimum 4 Year Degree - Bachelor of Science in Mechanical Engineering Actual Field Construction Experience: 10+ years of working in building construction. Direct Hourly Salary: $70/hr. - $80/hr. dependent on education, experience level, skillset and benefit package selected, rates will vary. Daily PPE: Wear standard OSHA hard hat, safety glasses, safety shoes every day during site inspections and oversight services. Position Location: West Point, New York Computer Knowledge: Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team and record management file repository. During field work, PPE must be worn 100% of the time. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to: Mechanical, Electrical, Plumbing, Fire Protection: prepare daily QA reports during mechanical walkdown inspections, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, including any lead or asbestos abatement, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings, • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements:

Job DescriptionDescription: Construction Quality Assurance Inspector West Point, NY Crawford Consulting Services, a Woman Owned Small Business (WOSB), provides cost estimating, scheduling, value engineering and construction management services to assist in the delivery of mission critical projects around the world. Job Description The Quality Assurance Construction Inspector (QA Inspector) is responsible for ensuring that construction work performed on US Army Corps of Engineers projects meets quality standards, complies with contract specifications, and adheres to safety and environmental regulations. The position requires a strong understanding of construction practices and USACE standards. The QA Inspector will provide technical oversight, monitor construction activities, document compliance, and facilitate issue resolution. Responsibilities • Quality Assurance Inspections, • Documentation & Reporting, • Contract Compliance, • Technical Support & Issue Resolution, • Safety & Environmental Compliance, • Coordination & Communication Qualifications and Experience • Education:, • Bachelor’s degree in Civil Engineering, Construction Management, or a related field preferred., • Equivalent experience in lieu of education will be considered., • Experience:, • Minimum of 10 years of experience in construction inspection or quality assurance for federal, state, or commercial projects., • Previous experience with USACE projects is highly desirable., • Certifications (Preferred but not required):, • Construction Quality Management for Contractors (CQM-C), • OSHA 30-Hour Certification, • Technical Skills:, • Proficient in reading and interpreting construction drawings, plans, and specifications., • Knowledge of construction materials testing and inspection methods., • Familiarity with quality management software and tools., • Interpersonal Skills:, • Strong communication skills, both written and verbal., • Ability to work independently and as part of a multidisciplinary team., • Problem-solving aptitude and attention to detail. Physical & Work Environment Requirements • Ability to work in various weather conditions and environments, including remote project sites.Security Clearance, • Must be able to obtain and maintain a security clearance if required by the project. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Requirements:

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." Position Overview Be knowledgeable of technical data concerning chemicals used and their application. Be knowledgeable of federal, state and local regulations regarding pest control. Maintain a copy of the business unit Commercial Service manual at close proximity at all times and follow the specified instructions therein. Maintain and service all route customers according to company standards and procedures. Call office daily as required for messages. Complete and submit daily service reports as required. Advise customers of potential problems. Keep management informed of any problems encountered on service routes. Maintain proper inventory of pesticides in usage. Maintain service records in accordance with EPA standards. Collect delinquent accounts. Maintain service equipment and vehicle in clean and proper operating condition. Maintain a safe driving record. Assist on other routes as required by management. Complete federal, state, local and company required training programs within prescribed time limits for proper certification. Available to work flexible hours as required by customer needs, including evenings, nights, and/or weekends. Other duties as assigned. Job Responsibilities • Be knowledgeable of technical data concerning chemicals used and their application., • Be knowledgeable of federal, state and local regulations regarding pest control., • Maintain a copy of the the business unit Commercial Service manual at close proximity at all times and follow the specified instructions therein., • Maintain and service all route customers according to company standards and procedures., • Call office daily as required for messages., • Complete and submit daily service reports as required., • Advise customers of potential problems., • Keep management informed of any problems encountered on service routes., • Maintain proper inventory of pesticides in usage., • Maintain service records in accordance with EPA standards., • Collect delinquent accounts., • Maintain service equipment and vehicle in clean and proper operating condition., • Maintain a safe driving record., • Assist on other routes as required by management., • Complete federal, state, local and company required training programs within prescribed time limits for proper certification., • Available to work flexible hours as required by customer needs, including evenings, nights, and/or weekends. Job Requirements • High school diploma or general education degree (GED) required, • 2 or 4 year degree preferred, • 1-3 months related experience preferred, • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily., • The requirements listed below are representative of the knowledge, skill, and/or ability required., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals., • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs., • Licenses/certificates as required by federal, state, or local regulations., • Immediately report to management any loss of required license. Physical Demands and Working Conditions The physical demands are representative of those that must be met by an employee to perform the essential function to this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Incumbent must be prepared to: • Move up to 10 pounds regularly, and 11-20 lbs frequently, by lifting, carrying, pushing, pulling, or otherwise repositioning objects. Exerting up to 50 lbs of force to move objects is required occasionally., • Uses legs and/or hands and arms to ascend or descend ladders, stairs, scaffolding, ramps, poles, etc., in a manner that exceeds what is required for ordinary locomotion., • Maintain his/her balance when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces; balance exceeds that needed for ordinary locomotion., • Bend legs and spine downward and forward to crouch or squat, and bend legs at the knee to come to rest on a surface with one or both knees, including crawling on hands and knees or hands and feet., • Push objects forward, downward, or outward with sustained force using the upper extremities to press with steady force, and drag, draw, haul, or tug objects with sustained motion using upper extremities to exert force., • Extend his/her hands and arms in any direction to reach objects, and move objects from a lower to a higher position, or move objects horizontally from one position to another, by lifting or carrying objects either in his/her hands or arms or by strapping equipment to the body; requires substantial use of upper extremities and back muscles., • Use touch of skin to perceive attributes of objects, such as size, shape, temperature, or texture; particularly fingertips., • Express or exchange ideas with others through the use of spoken word, quickly, accurately, and at an easily audible volume, and received detailed information through oral communication at usual speaking levels without correction, and/or make fine discriminations in the nature of sounds in the environment., • Operate a motor vehicle and use electrically and manually powered hand tools for securing objects to surfaces. Incumbent is required to have: • Close visual acuity to perform detail oriented activities at distances close to the eyes, as well as visual acuity to perform activities at or within arm’s reach with skill, control, and accuracy, and to determine the accuracy, neatness, and/or thoroughness of work assigned, or make general observations of facilities or structures (i.e., inspection)., • Visual acuity to operate motor vehicles or equipment. Incumbent will be subject to: • Both inside (not necessarily temperature controlled) and outside (without protection from weather; extreme heat-above 100 and/or cold-below 32 for more than one hour) environmental conditions., • Hazardous physical conditions, such as mechanical parts, vehicles, electrical current, heights and scaffolding, chemical exposure, and/or high heat., • Atmospheric conditions affecting the respiratory system of the skin, such as fumes, odors, dust, mold, mist, gas, poor ventilation., • Exposure to animals and insects., • Meet physical requirements and/or pass medical certification in compliance with state and/or federal regulatory requirements and company safety policies relating to carrying and wearing personal protective equipment (PPE), including, but not limited to an OSHA compliant respirator., • Working in confined spaces, narrow aisles, or passageways which could cause reactions in those with claustrophobic tendencies. #ZipRTX #RTX200 Base Pay RangeHourly: $20.00 - $21.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. \nCompany Description For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee. For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee.

Job Description General Summary Apply paints and various coatings to all types of surfaces. Detach and reattach wall mounted pictures, equipment and devices. Essential Duties and Responsibilities • Improves and maintains the overall interior appearance by painting and redecorating walls, woodwork and fixtures. Knowledge of surface peculiarities and types of paint required for different applications., • Prepares surfaces for painting by removing old finish or by placing putty or filler in nail holes and interstices, applies paint with a spray gun or brush., • May mix colors, oils, white lead and other paint ingredients to obtain proper color or consistency., • In general, the work of the maintenance painter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience., • Maintains the general cleanliness and appearance of the work areas including the workshop., • Repairs drywall., • Assists others as part of the maintenance team to perform other duties assigned according to personal qualifications. Knowledge, Experience and Skill Requirements • Minimum of three (3) years’ experience in healthcare facilities., • Excellent oral and written communication skills, • Possess a broad knowledge of facility operations and maintenance, • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • OSHA-10, OSHA 30, or Haz Work desired. Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. Disclaimer CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $33.29. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

THE POSITION IN A NUTSHELL \n \n Sciens Building Solutions is seeking an experienced Senior Fire Alarm Systems Technician with programming, commissioning, and troubleshooting capabilities and experience. This position will work closely with our sales team, field project teams, and clients to ensure a sound design, and seamless installation and commissioning of our fire alarm solutions. This is a key position for our growing team and requires attention to detail in all aspects of executing projects. Customer and employee interface requires a high degree of effective human relations. Communication skills, both verbal and written, are important elements of the position. \n \n WHAT YOU’LL BE DOING (and doing well!) \n\n • Responsible for reviewing system layouts and coordinating with engineering, project management, and sales departments for successful project execution.\n, • Produce field surveys and daily project logs of activity.\n, • Program and commission complex fire alarm systems leading to final acceptance by customers and Authorities Having Jurisdiction (AHJs).\n, • Interact with AHJs for testing and resolution of any minor issues related to a fire alarm system final test.\n, • Produce detailed commissioning and inspection reports in accordance with NFPA.\n, • Responsible for complex troubleshooting and effective resolution.\n, • Responsible for delivering projects on schedule and within cost budgets.\n, • Responsible for programming systems via laptop computers.\n, • Oversee project and vehicle inventory.\n, • Demonstrate proper operation of equipment and control units to customers and explain proper use and how to respond to any system signals.\n, • Manage onsite projects including their safety, quality, and performance.\n, • Review and understand smoke reports and program all requirements related to a smoke control system.\n, • Provide support, guidance, and expertise to the other technicians.\n, • Train and develop other service technicians on equipment and company policies and procedures.\n, • Manage job scheduling and job progress in an efficient and cost-effective manner, with a strong focus on quality.\n, • Determine placement of audible and visual notification and detection systems or components while in the field.\n, • Comply with industry standard procedures and Sciens safety programs/policies.\n\n \n WHAT WE LIKE ABOUT YOU \n\n • High school diploma or equivalent.\n, • Minimum of five (5) years of experience in a technician role within the fire-life safety industry.\n, • Advanced understanding of fire alarm circuit integrity and how to troubleshoot for circuit opens, shorts, or ground conditions.\n, • Independent ability to program the manufacturer's advanced system product platform(s)/graphical systems using a laptop computer.\n, • Demonstratable knowledge of fire alarm control unit and field equipment termination.\n, • Ability to make field decisions related to the installation of items such as audible and visual notification and detection placement.\n, • Ability to read and understand a smoke report and program all requirements related to a smoke control system.\n, • Ability to read fire system design drawings for installation and programming purposes.\n, • Ability to communicate and coordinate with onsite contractors.\n, • Ability to demonstrate proper operation of equipment and control units.\n, • Advanced knowledge of NFPA 72 code requirements for the installation of a fire alarm system.\n, • Advanced knowledge of Section 907 of the International Fire Code or state-adopted fire code.\n, • Advanced knowledge of Section 909 of the International Building Code or state adopted building code.\n, • Advanced knowledge of Article 760 of NFPA 70 (electrical code) for the installation of fire systems and circuiting.\n, • Understanding of state, local, contract, and/or product specific certifications determined by the business.\n, • NICET II or higher certification.\n, • Knowledge of state fire procedures, filing, and requirements.\n, • Ability to work under tight deadlines and with a sense of urgency.\n, • Ability to work independently with some supervision.\n, • Knowledge of OSHA safety standards and able to obtain OSHA 10 certification.\n, • Customer-focused; skilled in project and people management.\n, • Proficient in issue resolution.\n, • Excellent organizational, decision-making, and communication skills.\n, • Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday.\n, • Ability to travel occasionally overnight, as needed.\n, • Valid driver’s license & reliable transportation.\n\n \n WHAT WE’RE BRINGING TO THE TABLE \n\n • Competitive salary based on qualifications.\n, • Paid time off plan and holidays.\n, • 401(k) matching.\n, • Short term and long-term disability.\n, • Medical, dental, and vision plans with options.\n, • Life insurance.\n, • Company cell phone, laptop, and vehicle.\n, • Professional career development opportunities.\n, • Tuition reimbursement.\n\n \n \n \n \n $70k-$95k annually, final offer based on experience

THE POSITION IN A NUTSHELL \n \n Sciens Building Solutions is seeking an experienced Fire Alarm Technician with programming, commissioning, and troubleshooting capabilities and experience. This position will work closely with our sales team, field project teams, and clients to ensure a sound design, and seamless installation and commissioning of our fire alarm solutions. This is a key position for our growing team and requires attention to detail in all aspects of executing projects. Customer and employee interface requires a high degree of effective human relations. Communication skills, both verbal and written, are important elements of the position. \n \n WHAT YOU’LL BE DOING (and doing well!) \n\n • Responsible for reviewing system layouts and coordinating with engineering, project management, and sales departments for successful project execution.\n, • Produce field surveys and daily project logs of activity.\n, • Program and commission complex fire alarm systems leading to final acceptance by customers and Authorities Having Jurisdiction (AHJs).\n, • Produce detailed commissioning and inspection reports in accordance with NFPA.\n, • Responsible for complex troubleshooting and effective resolution.\n, • Deliver projects on schedule and within cost budgets.\n, • Program systems via laptop computers.\n, • Assist in the oversight of project inventory and responsible for vehicle inventory.\n, • Provide support, guidance, and expertise to the other technicians.\n, • Assist in managing job scheduling and job progress in an efficient and cost-effective manner, with a strong focus on quality.\n, • Demonstrate proper operation of equipment and control units to customers and explain proper use and how to respond to any system signals.\n, • Comply with industry standard procedures and Sciens safety programs/policies.\n\n \n WHAT WE LIKE ABOUT YOU \n\n • High school diploma or equivalent.\n, • Two to five (2-5) years of experience in a technician role within the fire-life safety industry.\n, • Siemens and/or EST 3-4 experience\n, • Ability to program and commission mid-range fire alarm systems independently.\n, • Ability to terminate fire alarm control units and field equipment with minimal supervision.\n, • Ability to communicate and coordinate with onsite contractors.\n, • Intermediate understanding of fire alarm circuit integrity and how to troubleshoot for circuit opens, shorts, or ground conditions.\n, • Intermediate computer knowledge related to the use and installation of software.\n, • Ability to demonstrate proper operation of equipment and control units.\n, • Intermediate knowledge of NFPA 72 code requirements for the installation of a fire alarm system.\n, • Intermediate knowledge of Section 907 of the International Fire Code or state-adopted fire code.\n, • Intermediate knowledge of Section 909 of the International Building Code or state-adopted building code.\n, • Intermediate knowledge of Article 760 of NFPA 70 (electrical code) for the installation of fire systems and circuiting.\n, • State, local, contract, and/or product specific certifications determined by the business.\n, • NICET I certification\n, • Knowledge of state fire procedures, filing, and requirements.\n, • Ability to read fire system design drawings.\n, • Ability to work under tight deadlines and with a sense of urgency.\n, • Ability to work independently with some supervision.\n, • Knowledge of OSHA safety standards and able to obtain OSHA 10 certification.\n, • Proficient in issue resolution.\n, • Excellent organizational, decision-making, and communication skills.\n, • Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday.\n, • Ability to travel occasionally overnight, as needed.\n, • Valid driver’s license & reliable transportation.\n, • Fire alarm experience preferred.\n\n \n WHAT WE’RE BRINGING TO THE TABLE \n\n • Competitive salary based on qualifications.\n, • Paid time off plan and holidays.\n, • 401(k) matching.\n, • Short term and long-term disability.\n, • Medical, dental, and vision plans with options.\n, • Life insurance.\n, • Company cell phone, laptop, and vehicle.\n, • Professional career development opportunities.\n, • Tuition reimbursement.\n\n \n \n \n \n $21.63 - $31.25/hour

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job DescriptionJob Requirements The (HVAC) Service Technician is responsible for executing field service activities, including preventative maintenance, inspections, start-ups, and emergency repairs, ensuring the safe and efficient operation of systems according to design specifications and customer requirements. This role demands meticulous system troubleshooting capability, strict adherence to safety standards, and effective communication with clients to manage expectations and ensure satisfaction. You should be able to repair generators, respond to emergency calls, and commission new systems. This position is part of the union and will follow the policies, benefits and perks set forth under the local's Collective Bargaining Agreement (CBA). The hourly rate is dependent on the level of expertise and includes pension, health insurance and annuity. The Company provides the necessary tools, equipment, vehicle with gas card, clothing, laptop, and cell phone. Compensation The expected pay range for this position is $20.71-$29.58 per hour, depending on experience, qualifications, and geographic location. Stark Tech reasonably expects to pay within this range at the time of hire. Individual compensation is determined based on several factors including experience, education, certifications, skills, internal equity, and market conditions. Work Experience • High School Diploma or equivalent and at least 2 years of experience in HVAC, or the equivalent combination of education (technical school) and experience., • Must follow union qualification process for Journeyman standing., • Knowledge in all facets of the HVAC industry, including but not limited to Air Conditioning, Heating, Electrical, Boilers, Humidification, Dehumidification, and Refrigeration., • Must have universal EPA CFC certification., • Must have 10-hour OSHA certification., • Must be a highly motivated and an independent thinker., • Must be able to thrive in a fast-paced, high profile (often mission critical) customer setting. Ability to multi-task, work under pressure and meet deadlines required., • Knowledge of HVAC&R theory, solid mechanical, electrical troubleshooting, and repair skills required., • Ability to read wiring diagrams, mechanical layouts and blueprints required., • Must have experience installing clean, dry refrigeration piping systems and associated practices., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies. At Stark Tech, we invest in our employees by offering a competitive benefits package recognized with Mployer's 2026 Great Employee Benefits designation, featuring Market Leading Medical Benefits, comprehensive medical, dental, and vision coverage, generous employer HSA contributions, paid time off, a 401(k) with employer match, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. \nCompany Description At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter. At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job Description Eagle Rock Properties, headquartered in New York, is a full-service real estate firm offering investment management, property management, and construction management services. With a team of over 275 professionals, we specialize in rental apartment communities across the Northeast and Mid-Atlantic regions of the United States. Under the leadership of our executives, who have owned and managed properties for more than 30 years, Eagle Rock Properties has emerged as a pioneering force in the industry. As a Maintenance Technician, under the direction of the Property Manager or the Maintenance Manager, you are responsible for the appearance and working order of individual apartments, exterior, and common areas. Responsibilities: In addition to your technical experience with Maintenance, electrical, HVAC, and mechanical systems and their maintenance and repair, you shall have proven customer service and leadership skills by: • Showing care and concern for our residents through timely follow-ups and meticulous completion of their apartment service tickets, • Resolving maintenance issues in the area of HVAC, electrical, plumbing, and appliance repair, • Managing the make-ready and apartment turnover process with attention to detail and timeliness so apartments can be leased and new residents can move in, • Preserving the value of the building by consistently executing on preventative maintenance programs, • Preserving the beauty of the building and the safety of the community through general upkeep and cleanliness, snow removal and grounds maintenance, • Sustaining peak efficiency operation levels for all property components, • Adhering to applicable building, county, and safety codes/standards, while running an accident-free operation, • Working weekends and participating in the emergency on-call rotation Qualifications: • 3-5+ years of experience in the trades, facilities, and/or residential building maintenance, • Strong leadership aptitude and experience preferred, • Knowledge of risk management, OSHA, and MSDS, • Proficiency with HVAC, plumbing, electrical trades, and appliance repair, • Basic carpentry, drywall, and painting skills, • A safety mindset and an eye for detail, • A builder's mentality (know it like you built it!), • Excellent communication skills, both written and verbal, • A sharp professional appearance, • Availability for emergency situations at the property, including an on-call rotation, • The ability to exert 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly, climb stairs, use ladders and work in varying weather conditions Requirements: • Availability to work a flexible schedule, including weekends, • Rotating on-call responsibility for after-hours emergencies, • Valid driver's license and/or access to reliable transportation, • EPA Certification (Type I & II or Universal) recommended Required Education: • High school diploma or equivalent, • Trade school and/or military training or industry designation (CAMT or CAMT II) Eagle Rock provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics

Job DescriptionDescription: Education: Bachelor of Science Civil Engineering - 4 Year Accredited Degree or Construction Management Field Experience: 5-10 years onsite Quality Assurance duties as Owner Oversight. Experienced with site/civil construction projects as well as new and renovated improvement projects. Civil work relating to underground utility installation (power, water, electrical, communications), road construction, stormwater culverts and inlets, drainage ditches, pedestrian, and vehicle bridges, spread foundations, caissons, general vertical building construction, structural reinforcement walls, structural beams, concrete walls, tilt-up construction, roof and gutter inspections, and hardscaping/landscaping. Required Training (must be current): 40hr - HAZWOPER Training/Hazardous Materials1hr - OSHA Competent Person for Excavation, Trenching, and Shoring Training40hr - Radiological/Radiation Protection Training30hr - OSHA 30 Security: Candidate must pass a CLIENT background check to secure proper site clearance and photo ID security badge. Computer Knowledge: Familiarity with USACE Three Phase Quality Control Process (1st – Preparatory Phase - Prepare by reviewing all documents and requirements, 2nd – Initial Phase - Ensure initial kickoff work is compliant, then 3rd - Follow-up Phase as independent verification). Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, Revit, and AutoCAD. Program Policy Knowledge: USACE EM 385-1-1, Unified Facilities Criteria (UFC) Requirements, Uniform Construction Code (UCC), ASCE Standards, & IBC as well as other regulatory requirements or new building codes. Previous Employment Exposure: FEMA, US Army, NAVFAC, DOD, DOE, National Guard installations a plus. Work Shift Durations: 5-7 days a week, 8-10 hours per day, work in the field 80% of the time performing Quality Assurance Inspections and Oversight on behalf of the Owner, while providing 20% of the time preparing daily reports, photograph downloading, review of construction related documents (submittals, RFIs, shop drawings) and report out to onsite project management team with any actionable items. Overtime may occur on limited basis but must be approved in writing by CLIENT prior to start. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site / Civil construction: prepare daily QA reports and submit to Owner at the end of shift, take progress photos of installation work, perform site surveys to avoid potential conflicts, collect existing measurement data in the field, documenting QA inspections performed as each observation, and observe Contractor QC testing, ensure daily punch lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities and Commissioning Agents, interpret construction drawings & specifications, observe Health and Safety plan conformance, review Contractor daily QC reports for compliance with contract documents, prepare meeting minutes as necessary, monitor supply chain and procurement equipment and material deliverables, observe and document startup, turnover and commissioning activities. Other Daily Qualifications: • Must possess good written skills for daily inspection reports, and correspondence between Owner and Contractor., • Must possess good oral skills for leadership role and public speaking at meetings., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide onsite daily walkdowns, QA inspections, generation of open list items, and closeout activities., • Must function as liaison between Owner and contractors, assist with resolving conflicts and identifying solutions., • Must perform tasks as quality inspector to maintain conformance with specifications., • Must NEVER direct or authorize work on behalf of the Owner. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements: