Trabajos osha 10 en Wayne, NJCrear alertas

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection Roll Off Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm, Sunday evening through Friday evening but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. Our Waste Collection Roll-Off Driver’s main responsibility is to safely operate a Roll-Off Truck, for the pick-up service of containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. A minumum of 1 year of experience driving and operating a Roll Off Truck is required. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Continuously monitor for safety and service-related issues, as well as containers or other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injures, or property damage., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Notifies Dispatch or Route Manager of issues as prescribed by Service Machine protocol, including blocked containers, potential missed pick-ups or problems that arise on the route., • Communicates customer requests or issues to Dispatch or Route Manager., • Completely dumps all containers and leaves the customer’s location clean and free of debris., • Completes and submits customer tickets when excess yardage must be removed., • Positions containers on the customer’s property in a manner that ensures lids are properly replaced, containers are set in an upright position, and containers do not block driveway entrances or traffic., • Work closely with Route Supervisor to improve route efficiencies and identify best practices., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather., • Drivers must be able to physically mount and dismount the truck throughout the duration of the workday. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL with airbrake endorsement, and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • At least 1 year of experience driving and operating a Roll Off Truck, • Working knowledge of DOT, OSHA, and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map., • Must be able to meet the physical and safety requirements of the position. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $32.58/Hr. Salary Range Maximum: USD $32.58/Hr.

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection CDL Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. This Depot will be servicing our NYC routes. Working alongside a Helper, our Waste Collection CDL Driver’s main responsibility is to safely operate a rear-loading truck, for the pick-up service of bags or containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • The driver is responsible for safely operating the truck in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Ensuring that the container and its content are always secure. This includes periodically checking tarps and ties, and may require the driver to climb onto containers and/or reach overhead., • Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports., • Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • Performs other duties as assigned. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • Working knowledge of DOT, OSHA and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map, • Must be able to meet the physical and safety requirements of the position., • Must be willing and able to work required worked hours as allowed under DOT regulation and may include weekend, night, and/or holiday work. Physical Requirements • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $31.46/Hr. Salary Range Maximum: USD $31.46/Hr.

Plant Manager / Operations Lead - Plastics Manufacturing Location: Clifton, NJ Salary Range: $120,000 - $250,000 Position Type: Full-Time Key Requirements • Bilingual Spanish/English (Required), • Proven management and leadership skills with 5-10 years manufacturing operations experience, • Experience in plastics manufacturing, specifically polyethylene films, bags, or packaging (Required), • Strong team leadership capabilities with experience managing 10+ employees About The Role The New York Consulting Group LLC is seeking a hands-on, results-driven Plant Manager / Operations Lead to oversee plastics manufacturing operations at our Clifton, NJ facility. This role involves managing the end-to-end production process of polyethylene films, liners, bags, and custom packaging solutions in a 250,000 sq. ft. facility housing 18 extruders running 24/7 and 3 recycling machines. Industry-Specific Experience Required We are specifically seeking candidates with hands-on experience in: • Plastics extrusion and film manufacturing, • Polyethylene products (films, liners, bags), • Converting operations for plastic packaging, • Multi-layer film production, • Recycling and reprocessing operations, • Custom packaging solutions manufacturing Key Responsibilities • Manage daily plant operations for polyethylene film and bag production lines, • Oversee 18 extrusion production lines, bag converting equipment, and 3 recycling machines, • Lead, mentor, and develop a team of 10-15 employees including machine operators, production associates, and maintenance staff, • Drive preventative maintenance programs specific to extrusion and converting equipment, • Troubleshoot extrusion and converting machinery breakdowns efficiently, • Implement and uphold safety standards in compliance with OSHA regulations, • Monitor raw material (resin) inventory, WIP, and finished goods accuracy, • Analyze production data to optimize film quality, thickness consistency, and waste reduction, • Support continuous improvement initiatives in plastics manufacturing processes, • Foster a culture of accountability, teamwork, and operational excellence Qualifications Required: • Bilingual in Spanish and English - must be able to communicate effectively in both languages, • 5-10 years of progressive experience in plastics manufacturing operations, • Specific experience with polyethylene extrusion, film converting, or plastic packaging manufacturing, • Proven leadership experience managing production teams in multi-line extrusion environments, • Understanding of plastic resins, additives, and material handling, • Knowledge of blown film or cast film extrusion processes, • Demonstrated ability to identify operational improvements in plastics manufacturing, • Hands-on, proactive management style Preferred: • Experience with multi-layer film production, • Knowledge of plastic recycling and reprocessing operations, • Familiarity with retail, commercial, and industrial packaging requirements, • Experience in 24/7 continuous manufacturing operations, • Understanding of FDA requirements for food-grade packaging What We Offer • Competitive salary range of $120,000 - $250,000 based on experience, • Opportunity to lead operations in a high-volume plastics manufacturing environment, • Work with modern extrusion and converting equipment, • Career growth opportunities within the plastics industry, • Full benefits package Only US Citizen, this is a must.

Job DescriptionSalary: $20-35 DOE Summary: Esposito Construction has dozens of major sitework projects underway across NJ and were looking for a competent Construction Pipe Crew Member with 3+ years field experience to join the team in South NJ. Experience in working on relevant projects is essential. If you are looking to join a growing company with room for advancement please apply today! Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $20-35 DOE Responsibilities: • Participating and helping plan day to day crew operations, • Communicating with sub-contractors, • Coordinating equipment and materials required for work assigned, • Providing input for daily and weekly reports for the job, • Adhering to timelines and communicating when necessary if delays are anticipated, • Maintaining and helping grow our safety culture Qualifications: • Must be able to work in team setting, • Able to effectively communicate in English both written & spoken, • Physically capable to work on your feet and lift/move material productively, • Must have a good pair of work boots, • OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description Jet/ Vac Truck Assistant Operator STABLE JOB INDUSTRY Drainbusters, Inc is seeking to fill several positions for a Vac Con / Jet Truck assistant technician VALID DRIVERS LICENSE REQUIRED Position Type/Expected Hours of Work: This is a full-time position. Days and hours of work are typically Monday through Friday and includes work on weekends, evenings, holidays - Flexibility is required as job duties demand. Compensation/ Benefits: • Pay is comparable with experience but higher than industry standard., • 401k, Health, Paid time off Duties include but are not limited to: working in and around sanitary and storm sewers. The technician must be able to work, as well as take direction from the vac con operator which may include: • Pre trip inspection of vac con vehicle, • Equipment driving and operation throughout NJ/PA/NY, • Entry into manhole and underground structures, • Manual labor tasks (lifting, carrying, dragging or pulling material, etc.), • Set up/ breakdown equipment (tubes, hoses), • Use of hand tools/power tools/video equipment, • Pump watch and operation, • Completion of required paperwork Skills required: · Must understand and speak fluent English · Preferred 1-3 years of experience as a vac con / jet truck assistant · OSHA 10 and/or 30 OSHA and Confined Space training preferred · Must also have the ability and/or willingness to learn and operate company equipment · Ability to communicate effectively with customers / crew members including, both verbally and in writing · Ability to think logically about work at hand and compare site conditions with project designs · Must work in a manner that will not jeopardize the health and safety of him/herself, other employees or the general public · Must pass a pre-employment drug and alcohol screen · Drainbusters, Inc is an AA/EOE of Minorities/Females/Vets/Disability and a Drug-Free Workplace

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton NJ Inbound/Internal Transfers Warehouse Operations ManagerAbout the role The ideal candidate will be responsible for managing warehouse operations in our Clifton, NJ location. The Inbound/Internal Transfers Operations Manager will ensure the Clifton facility's inbound and internal transfer processes operate safely, efficiently, and accurately. This role will prioritize workplace safety, oversee inbound freight scheduling, receiving, put away accuracy, internal stock movements, and dock-to-stock cycle times to maintain high service standards and inventory readiness for downstream operations. Responsibilities: • Safety, dock-to-stock Efficiency, inbound inventory accuracy, internal transfer accuracy & timeliness, and people management., • Lead Inbound & Internal Transfers – Serve as the senior leader for all inbound functions (unloading, inspection, put away) and own internal stock transfers between zones/buildings/sister facilities, including scheduling and documentation to keep materials flowing., • People Leadership & Development – Mentor and coach inbound team leaders and supervisors; set clear expectations, create development plans, provide ongoing feedback, and build a high-performance, accountable culture., • Inbound Labor Planning & Productivity – Optimize staffing for inbound peaks and container/truck schedules using forecasts and internal tools; deploy labor to demand, meet productivity KPIs, and address performance gaps quickly., • Operational Excellence & Inventory Accuracy (Dock-to-Stock) – Eliminate receiving-dock bottlenecks by enforcing SOPs and standardized workflows; improve receiving checks, run root-cause analysis on discrepancies, take corrective actions, and process goods within target timelines., • Safety & Compliance – Prioritize a safe inbound work environment through proactive dock safety monitoring, safety training, and adherence to all compliance requirements to minimize incidents and liability., • Cross-Functional Alignment, DC Capacity & Cost Control – Partner with procurement, transportation, replenishment, and outbound to align inbound scheduling and transfers; collaborate on space utilization and peak planning; reduce waste and costs in labor, detention/demurrage, and space usage., • Contribute to team effort by accomplishing related results as needed., • Work in an environment where the noise level varies and can be loud, • Work in an environment where the temperature can be low.(refrigerator temperature at or below 40°ree; F (4°ree; C). The freezer temperature should be 0°ree; F (-18°ree; C), • Able to stand/walk for up to 12 hours during shiftsQualifications, • Bachelor's degree (or equivalent experience), • 10+ years in warehouse or manufacturing operations, • 5+ years in a supervisory or management role, • Experience with Warehouse Management Systems (WMS), • Proficient computer skills (Excel, reporting tools), • Knowledge of health & safety regulations (OSHA), • Experience managing high-volume or fast-paced distribution environments, • Proven track record of leading large teams (50+ associates), • Strong understanding of inventory control and cycle counting processes, • Demonstrated success in reducing labor costs or improving productivity metrics, • Bilingual (Spanish), • Six Sigma (Green Belt), • Food Safety Certification, • OSHA Certification, • Project management certification, • Prior experience in Automated warehouses/manufacturingCompany Benefit, • Comprehensive health insurance package, including medical, dental, and vision, • 401k match, • Bi-annual Performance bonus, • Vacation and holiday time off, • The US base salary range for this full-time position is $92,000 - $108,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description Staff Management Group is seeking a Senior Mechanic for our client in East Hanover, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule • 3rd shift: 11PM - 7:15AM, • Plus Overtime Pay Rate • $32 / hour Job Summary The Senior Mechanic is responsible for having the skills necessary to setup, operate and trouble shoot all packaging machinery.The Senior Mechanic will also possess the ability to lead a team of 5 to 10 mechanics. Job Responsibilities • Responsible for proper tooling and setup of packaging lines., • Responsible for ensuring that process parameters are set according to documented standards., • Troubleshoot mechanical issues., • Work with Quality Assurance to resolve various packaging quality related issues., • Responsible for machine operation efficiency and waste minimization., • Responsible to complete all necessary machine documentation., • Provide training to operators., • Assist Production Supervisor in maintaining cGMP, DEA, and OSHA compliance., • Responsible for machine safety requirements and production line compliance to safety guidelines., • Responsible for line clearance and approval authorization., • Must have working knowledge of PLC and Automation., • Must have working knowledge of continuous inkjet and thermal inkjet printers, UV printers, blister packaging machines, bottle fillers, cartoners, and vision systems., • Provide recommendations for continuous process improvement, e.g., adding new equipment or build out from existing., • All other duties as assigned by the Director of Operations. Job Requirements • Must have a high school diploma, • Minimum of 3-5 years of experience as a packaging mechanic or equivalent experience., • Should be able to lift a minimum 45 lbs, • Must be able to work in high volume packaging rooms, • Must be able to read and write in English. Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is requiredKnowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 8t744tCbfk

Job DescriptionTitle: Human Resources (HR) Director Reports to: CEO Department: Shared Services - Human Resource Responsibilities: • Strategic HR Leadership, • Partner with senior leadership to develop and implement HR strategies aligned with business goals and organizational growth., • Lead workforce planning, succession planning, and organizational design initiatives to support the evolving needs of the industry., • Lead initiatives that foster innovation, creativity, and collaboration while strengthening the company’s employer brand through a strong culture and employee experience., • Compliance & Policy Maintenance, • Ensure compliance with all federal, state, and local labor laws as well as industry-specific standards., • Maintain and update HR policies, employee handbooks, and workplace practices to reflect current regulations and best practices., • Participate in internal and external audits to ensure HR compliance., • Oversee HR records management, including sensitive employee documentation., • Employee Relations & Engagement, • Serve as a primary resource for employee relations matters, including disputes, grievances, legal cases, disciplinary actions, offboarding, and exit interviews., • Provide guidance to managers and employees to ensure fair and consistent resolution of workplace concerns., • Drive employee engagement and diversity, equity, and inclusion initiatives., • Handle unemployment insurance (UI) claims, including response preparation, documentation, and representation as needed., • Talent Acquisition & Retention, • Oversee recruitment and selection strategies to attract and retain top talent across corporate, retail, and manufacturing roles., • Partner with hiring managers to develop strong pipelines of candidates in alignment with business needs., • Compensation, Performance Management & Development, • Serve the annual performance review cycle, including goal setting, performance appraisals, and merit increases., • Partner with Finance to manage HR budgets, salary benchmarking, and merit increase allocation., • Oversee compensation programs to ensure internal equity and market competitiveness., • Design and implement leadership development, training, and career progression programs., • Safety & Compliance, • Develop, implement, and monitor workplace health and safety programs in compliance with OSHA standards and company policies (e.g., PPE requirements)., • Conduct regular safety inspections, audits, and training programs., • Manage incident reporting, root cause analysis, and corrective actions., • Partner with management to reduce workplace hazards and foster a safety-first culture., • Prepare and submit required federal and state compliance reports (e.g., OSHA 301, EEO reporting)., • Manage the full cycle of workers’ compensation claims, including filing, follow-up, and case management, plan renewal., • Serve as liaison with insurance carriers, medical providers, and employees to ensure proper claim handling., • Track and report workers’ comp metrics and trends., • General Affairs, • Oversee administrative and facilities-related operations, including office management, supplies, and vendor coordination, to support daily business activities., • Manage commercial insurance policies and cases related to workplace incidents and liabilities, including claims management, coordination with insurance carriers for audits and claims resolution, and annual plan renewals., • Maintain accurate records of insurance policies and claims., • Coordinate event logistics and provide support for company events, as needed., • Assist with HR projects, reporting, and compliance audits as needed.Qualifications:, • Minimum of 10+ years of progressive HR experience, with at least 5 years in a managerial or leadership role., • Bachelor’s degree in Human Resources, Business Administration, Safety Management, or a related field required., • Knowledge of federal and state labor regulations, and workplace safety standards., • Strong organizational skills with the ability to manage multiple priorities and deadlines., • Ability to effectively communicate across diverse teams and with senior leadership., • High degree of confidentiality, professionalism, and discretion when handling sensitive information., • Proficiency in MS Office Suite (Excel, Word, PowerPoint) and HRIS systems., • Bilingual proficiency in Korean and English required.Preferred Qualifications:, • Proven experience in HR, including employee relations, workplace safety, compensation & benefits., • Preferably work experience in the cosmetics or manufacturing industry., • Master’s degree or HR certification (SHRM-SCP, PHR) is a plus., • Preferred OSHA certification (e.g., OSHA 10 or OSHA 30).Physical & Other Requirements, • Ability to work in a fast-paced office and manufacturing environment, with occasional visits between the Totowa (main office) and Wayne warehouse facility., • Medical, Dental, and Vision Insurance, • Life Insurance, • 401k match, • PTO Powered by JazzHR uo275JTQqW

Job DescriptionSalary: $25-45 DOE Summary: Esposito Construction is seeking anEquipment Operatorwith field experience for various job sites across the state. Specifically we are looking for team members in NJ. Candidates must have experience running loaders, dozers, excavators and various other machines. Candidates must also have knowledge of site work, earth moving, and utilities installation. Experience with pipe and/or utility work is a plus. We are seeking someone who is motivated, hands-on, self-starter with a proven track record. Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $25-40 DOE Responsibilities: • Operating equipment and heavy machinery, • Participating and helping plan day to day crew operations, • Communicating with sub-contractors, • Coordinating equipment and materials required for work assigned, • Providing input for daily and weekly reports for the job, • Adhering to timelines and communicating when necessary if delays are anticipated, • Maintaining and helping grow our safety culture Qualifications: • Must be able to work in team setting, • Pipe experience preferred but not required, • Physically capable to work on your feet and lift/move material productively, • Must have a good pair of work boots, • OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job DescriptionTitle: Quality Control FG Manager Reports to: Head of Quality Department: Quality Control Responsibilities: • Scheduling of QC Inspectors for Incoming Components Receiving; Raw Material Receiving Inspection, Manufacturing/Production areas, Warehouse FG auditing, Special Sample handling, Review of Inspection Records, including but not limited to: In-coming Inspection records; In-process Batch Records and related documentation., • Conduct non conformance, product complaints, out-of-specification investigation and provide corrective and preventive actions with follow-ups as related to QC activities., • Trains and supervises document review personnel; Incoming Inspection records, batch release personnel, issues certificates of conformance (COC), certificates of manufacture (COM), and certificates of analysis (COA) to customers on bulk and work-in-progress (WIP). Maintains accurate record of approved, quarantined, rejected products., • Ensure compliance to all SOPs and other regulatory requirements (e.g. FDA, EPA, OSHA, ISO 13485:2003)., • Maintain working knowledge of OTC Drug requirements for incoming materials and ingredients; components (primary and secondary); intermediates, bulk and FGs., • Reviews, Approve, Release, Quarantine or Reject per compliance inspection and testing such materials as: Incoming OTC and Cosmetic RMs; Incoming bulk and intermediates; Incoming Components; where applicable, to customer requirements., • Maintains a working knowledge of QC inspection requirements for components, raw materials, in-process/bulk and finished goods., • Ensures that review of in-process activities in Manufacturing/Production and Warehouse areas is conducted by QC inspectors for conformance to specifications; follow up on out-of-specifications including non conformances., • Participates in In-process Quality in-house and outside training program., • Conducts periodic analysis of In-process Inspection program for pre-weigh and bulk manufacture and makes recommendations., • Assist in interpreting and/or developing of customer specifications and requirements for approved formulas., • Assists in establishing production and assembly inspection information sheets and documentation as required., • Maintains and updates ERP System, maintains repository of batch records/documents, and other Mfg & Pdn/Assembly in-process Specifications (F/As)., • Reviews of batch records, fill cards, work sheets, and Inspection documentation for completeness and correctness., • Conduct non-conformance resolutions, complaint investigations, and associated corrective and preventative actions., • Reviews of QC Inspection reports daily for correctness and completeness., • Facilitates on site customer inspections, coordinating availability of product and communication of disposition to Quality and Inventory Control. Interfaces with customer distribution operations where needed., • Maintains awareness and compliance with safety regulations in performing job duties., • Ensure that finished goods, bulk, raw materials, components are maintained correctly in the warehouse and other holding areas., • Assist in the review and release of finished products, when applicable., • Perform supplier and vendor audits, as well as, Mock recall and internal audits., • Ensure compliance to Product Quality Review stipulations., • Perform the functions of Authorized Person (AP) for goods and materials., • Maintain working knowledge of QC Analytical testing including IR, pH, Refractive Index, Viscometer, Spectrophotometry, Vacuum tester, and other Instrumentation., • Maintain working knowledge of MIL-STD/ANSI/ASQ Sampling and Testing., • Maintain Standards, Range boards, and Retain Samples ProgramQualifications:, • Minimum of Bachelor degree (Life Sciences, Engineering, related profession)., • Five+ years industry or related experience in cosmetic, device, food, or pharma., • Previous inspecting, auditing or manufacturing experience - a plus., • Data analysis, specification development skills., • Computer literate and effective communication skills., • Medical, Dental, and Vision Insurance, • Life Insurance, • 401k match sdNBCK0IEX

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • Trains research assistants and graduate students, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Preparation of proposal estimates of time and expenses required to complete project. Qualifications: • Bachelor’s degree in related field, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license preferred., • 40-hour OSHA HAZWOPER certification, • Licensed Site Remediation Professional (LSRP) license preferred, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $100,000–$140,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Senior Geotechnical Project Manager We’re actively seeking a Senior Geotechnical Project Manager to lead and deliver complex geotechnical engineering projects from concept to completion. This leadership role involves managing field investigations, coordinating with clients and multidisciplinary teams, and ensuring technical excellence in all aspects of project execution. The ideal candidate is a licensed Professional Engineer (PE) with extensive geotechnical experience and strong project management capabilities. As a Senior Geotechnical Project Manager, you will: • Direct and manage geotechnical site investigations, analysis, and reporting, • Lead the planning, budgeting, and scheduling of projects across multiple sites, • Oversee preparation of technical reports, proposals, and design documents, • Collaborate with clients and internal teams to deliver efficient, high-quality solutions, • Mentor junior staff and contribute to the professional growth of the team To succeed as a Senior Geotechnical Project Manager, candidates must have: • A valid PE license, • 10–12+ years of engineering experience, including 8+ years in project management, • Expertise in geotechnical engineering principles and software (e.g., Rocscience, GSLOPE, Civil 3D), • OSHA 40-hour HAZWOPER certification (preferred), • Strong written and verbal communication skills, • A competitive salary range of $152,000–$210,000, • Bonus opportunities and mileage reimbursement, • Paid time off, full benefits package, and 401(k) with company match

Job Description Our client, an international Fortune 500 manufacturing company, is seeking to hire a Senior Commercial Counsel to their Parsippany, NJ office. Our client is known for manufacturing appliances (refrigerators, air conditioners, laundry solutions, and floor solutions). Key Responsibilities -Commercial Agreements Management: Draft, review, negotiate, and manage a variety of commercial agreements(e.g., NDAs, sales agreements, vendor/supplier contracts, service agreements, basic distribution agreements).Advise internal stakeholders on contractual risks and compliance. -Employment Law & Labor Compliance: provide legal advice and support on employment law (hiring, termination, discrimination, wage/hour, workplace safety). Represent the company in employment-related disputes or investigations (EEOC, OSHA, etc.). -Product Safety Compliance: Advise on product safety regulations (CPSC, UL standards, labeling). -Conduct legal research on federal, state, and local laws and regulations relevant to the business. -Advise internal stakeholders on general commercial law, contract interpretation, and risk mitigation strategies. Skills and Qualifications • Education: Juris Doctor (JD) from an accredited law school., • Active membership, in good standing, with a state bar of the New Jersey Bar or be able to obtain an in house license in 6 months. • Experience: 10 + years relevant legal experience, preferably including some experience in manufacturing, technology, or consumer goods. • Familiarity with using global metrics in a legal/business context., • Strong legal research, analytical, and problem solving skills., • Excellent organizational skills and ability to manage multiple priorities effectively., • Strong negotiation, communication, and problem solving skills.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • Trains research assistants and graduate students, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Preparation of proposal estimates of time and expenses required to complete project. Qualifications: • Bachelor’s degree in related field, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license preferred., • 40-hour OSHA HAZWOPER certification, • Licensed Site Remediation Professional (LSRP) license preferred, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $100,000–$140,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Job Title: Dental Assistant w/X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR s8XCM7OvuI

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Job Title: Dental Assistant w/X-ray - $2,000 Sign-on Bonus Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR 2uMqGerHGY

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR w0ex38NrfM

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Pest Control Consultants do? The primary purpose of this role is to sell the company's industry leading pest management services and products to new and existing residential customers, while maintaining a customer-focused service to grow the business. You’ll be the face of our national brand to your local community, and your clients will count on you to protect their homes and their families. This includes assessing customers' needs by consulting with the customer and performing an analysis using expert knowledge of the company's products and services that result in the sales of the organization's pest control solutions. Responsibilities include but are not limited to the following: * Visually inspect homes for pests, pest harborage, pest entries, etc. Based on assessment findings, sell pest control solutions as well as preventative maintenance for residential customers * Collaborate with our Customer Service Center, Inside Sales department, and Technicians for increased opportunities * Partner with Branch Manager to identify revenue streams with our current base and service specialist engagement Develop proposals for customers to resolve existing pest issues while also proposing additional enhancements to pest household services * Complete Home diagram using Sales CRM and provided to ensure clear understanding of customer home and possible challenges * Follow up on past proposals to close sales opportunities * Provide expert knowledge to new service installations to ensure the job is completed satisfactorily * Complete daily activities and sales performance using the company sales CRM Essential Job Functions: We’re not going to sugarcoat it. The essential functions of this job have some physical demands (of course, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Here’s what we mean: * You’ve got to be able to move up to 10 lbs. regularly and 11–20 lbs. frequently, whether that’s lifting, carrying, pushing, pulling, or otherwise repositioning objects * You’ll move around a lot — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. You’ll go up and down stairs, ladders, scaffolding, ramps, and poles. And you’ll need to keep your balance when walking, standing, or crouching on narrow, slippery, or moving surfaces. (You’ll definitely get your steps in.) * You must be comfortable dealing with different pests (spiders, flies, mosquitos, rodents, etc.), as well as being required to go into small spaces such as basements, crawl spaces, attics, etc. * You must be able to safely operate a motor vehicle and make sure it and all other equipment is kept clean * Sometimes you’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you’ll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (you know, where critters live) What do you need? * High school diploma or equivalent * Strong social, customer service, and communication skills — in fact, we’d be really impressed if you came to this role with related experience and/or training in sales. * Prefer at least 1-2 years of pest technician or sales experience * Travel up to 100% of time within assigned territory(s) #ZipSales #LI-BR1 Base Pay RangeHourly: $21.00 - $28.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth * Multiple avenues to grow your career * Training and development programs available * Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness * Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 * Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement * 401(k) retirement plan with company-matching contributions Work-Life Balance * Vacation days & sick days * Company-paid holidays & floating holidays * A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. Know Your Rights - Workplace Discrimination is Illegal Pay Transparency - Nondiscrimination Provision California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Account Executives do? The primary purpose of this role is to sell the company's industry leading pest management services and products to new and existing commercial customers, while maintaining a customer-focused service to grow the business. Account Executives call on a full spectrum of market segments including hospitality, food & beverage processing, healthcare, and retail. You will join a results-oriented environment where you will proceed through a comprehensive training program to learn and understand our pest management services and products. You will learn how to inspect and identify infestations (or potential infestations) of all kinds of organisms, insects, birds, and other pests. Once you are knowledgeable in that, you will turn your talents to proposals and presentations that result in sales. Responsibilities include but are not limited to the following: * Create new business opportunities through cold calling, prospecting, networking, leads, referrals, and cross-selling * Visually inspect buildings for pests, pest harborage, pest entries, etc. Based on assessment findings, sell pest control solutions as well as preventative maintenance for Commercial customers * Craft territory development strategies that will result in exceeding sales targets * Learn and maintain complete knowledge of Rentokil’s programs, protocols, pricing policies, and service offerings * Build partnerships and collaborate effectively with internal departments to maximize growth opportunities and ensure the delivery of outstanding service solutions * Complete daily activities and sales performance using the company sales CRM Essential Job Functions: We’re not going to sugarcoat it. The essential functions of this job have some physical demands (of course, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Here’s what we mean: * You’ve got to be able to move up to 10 lbs. regularly and 11–20 lbs. frequently, whether that’s lifting, carrying, pushing, pulling, or otherwise repositioning objects * You’ll move around a lot — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. You’ll go up and down stairs, ladders, scaffolding, ramps, and poles. And you’ll need to keep your balance when walking, standing, or crouching on narrow, slippery, or moving surfaces * You must be comfortable dealing with different pests (spiders, flies, mosquitos, rodents, etc.), as well as being required to go into small spaces such as basements, crawl spaces, attics, etc. * You must be able to safely operate a motor vehicle and make sure it and all other equipment is kept clean * Sometimes you’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you’ll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (you know, where critters live). What do you need? * High school diploma or equivalent; * A valid driver’s license from your current state of residence. * Strong social, customer service, and communication skills * Preferred two years of experience in Business to Business sales — in fact, we’d be really impressed if you came to this role with prospecting skills (cold calling, lead generation, networking) * Self-motivated, hunter’s mentality with the ability to work independently * Will be required to obtain any required industry licenses that will be provided and paid for by the company * Travel up to 100% of time within assigned territory(s) #ZipSales #LI-BR1 Base Pay RangeYearly: $42,432.00 - $45,968.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth * Multiple avenues to grow your career * Training and development programs available * Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness * Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 * Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement * 401(k) retirement plan with company-matching contributions Work-Life Balance * Vacation days & sick days * Company-paid holidays & floating holidays * A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. Know Your Rights - Workplace Discrimination is Illegal Pay Transparency - Nondiscrimination Provision California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. Company DescriptionEhrlich has been providing expert pest control services to homeowners and businesses since 1928. We offer customized, effective and fast pest control solutions which include fumigation, bed bug control, and termite control - all provided by local offices throughout the east coast from Maine to Florida.Ehrlich has been providing expert pest control services to homeowners and businesses since 1928.\r\n\r\nWe offer customized, effective and fast pest control solutions which include fumigation, bed bug control, and termite control - all provided by local offices throughout the east coast from Maine to Florida.

Job Description Geotechnical Project Manager We’re actively seeking a Geotechnical Project Manager to lead and deliver complex geotechnical engineering projects from concept to completion. This leadership role involves managing field investigations, coordinating with clients and multidisciplinary teams, and ensuring technical excellence in all aspects of project execution. The ideal candidate is a licensed Professional Engineer (PE) with extensive geotechnical experience and strong project management capabilities. Key Responsibilities: • Oversee geotechnical site investigations and evaluate subsurface conditions, • Plan, coordinate, and manage project schedules, staffing, and budgets, • Review and deliver design documents, technical reports, and client proposals, • Lead teams through all phases of engineering projects while ensuring compliance with contract and regulatory requirements, • Interface directly with clients to provide status updates, resolve issues, and ensure satisfaction, • Supervise and mentor junior staff, promoting technical growth and performance excellence, • Bachelor’s degree in civil, geotechnical, or related engineering field, • 8–10 years of engineering experience, with at least 5 years in project management, • PE license required; LSRP and 40-hour OSHA HAZWOPER preferred, • Proficiency with engineering software such as AutoCAD, Civil 3D, Rocscience, GSLOPE, and Microsoft Office, • Strong leadership, organizational, and communication skills, • Ability to work both in office and field settings, • Comfortable walking on uneven terrain in varied weather conditions, • Competitive base salary: $102,000–$141,000, • Bonus potential, mileage reimbursement, and full benefits package

Job DescriptionTitle: Regulatory Affairs Supervisor Reports to: Manager, Regulatory Affairs Department: Quality Assurance/ Quality Control Responsibilities: • Assist the Manager during cGMP, Environmental, and Regulatory audits., • Assist the Manager to create and collate product master files (dossiers), drug master files (DMF)., • Generate and Review of CoCs, CoAs, CoMs, BSE documents, CMR documents, RM Certificate of Analysis, RM Safety Data Sheet, RM technical documents, RM composition breakdown, as may be required for local and international submissions., • Generate Raw Material Regulatory statement: Origin Statement, Clean List, Sephora, Ulta, Cruelty Free statement, Heavy metal statement, Impurity statement, REACHCompliant Statements, Global and regional Compliance statements, Food allergen statement, Fragrance allergen statement, Nitrosamine-free Statement, EU/Chinacompliant statement, etc. (as applicable)., • Responsible for Gluten free, organic (USDA/ Ecocert) regulatory submission and share updated regulation within team members., • Manage communication with Vendors/suppliers for RM documents and follow up on request with vendors., • Ability to use in-house and 3rd party portal to generate compliance documents, product information packets, Product / Formulary SDS, Toxicology statements, etc, as applicable., • Review formulas, ingredients, and associated documents for compliance with designated regulatory filings and proposed submissions. Notify heads of quality and R&D (or designee) regarding any discrepancies or deficiencies with filings and items intended for submissions., • Co-ordinate investigations (audit findings, etc); correspondences to regulatory audits; and registration of products and facility with agencies., • Ensure compliance to all SOPs and other regulatory requirements (e.g. FDA, EPA, OSHA, TGA, Japan, Health Canada, ISO, EU, China CSAR, etc)., • Responsible for facility registrations, renewals, and document submissions to regulatory agencies under the direct supervision of the Head of Quality., • Assist the Manager during periodic regulatory reviews, regulatory updates, and annual GMP training., • Familiar with SOPs generation process, Specification controls, and Change Control program., • Familiar with quality management system (QMS) in compliance with US 21CFR 210, 211., • Maintain familiarity with changing global regulatory requirements., • Minimum of Bachelor degree (Life Sciences, Engineering, related profession)., • Experience of drug, cosmetic, or medical device regulatory is a pre-requisite., • Familiarity with FDA requirements under 21CFR 210, 211, & 820 is a pre-requisite., • Three + years industry or related experience in any combination of cosmetic, medical device, food, or pharma is required., • Previous regulatory, inspecting, auditing or manufacturing experience - a plus., • Data analysis skills - a plus., • Computer literate and effective communication skills., • Ability to lift and carry up to 10-15 pounds.Compensation & Benefits:, • Pay range: $67,000 - $72,000 per year, • Medical, Dental, and Vision Insurance, • Life Insurance, • 401k match, • PTO Powered by JazzHR CE9lUZzcQa

Job DescriptionTitle: Regulatory Affairs Specialist Reports to: Manager of Regulatory Affairs Department: Quality/ Regulatory Responsibilities: • Assist the Manager of Regulatory Affairs during cGMP, Environmental, and Regulatory audits., • With the assistance of Head of R&D (or designee), create and collate product master files (dossiers), drug master files (DMF)., • Generate and Review of Product CoCs, CoAs, CoMs, BSE documents, CMR documents, RM Certificate of Analysis, Safety Data Sheet, technical documents, RM composition breakdown, as may be required for local and international submissions., • Generate Raw Material Regulatory statement: Origin Statement, Cruelty Free statement, Heavy metal statement, Impurity statement, Food allergen statement, Fragrance allergen statement, Nitrosamine-free Statement., • Review Customer “No-No List, Special Store Prohibited List, Prop 65, REACH-Compliant Statements, Global and regional Compliance statements, EU/China-compliant statement, etc. (as applicable)., • Co-ordinate investigations (audit findings, etc); correspondences to regulatory audits; and registration of products and facility with agencies., • Ensure compliance to all SOPs and other regulatory requirements (e.g. FDA, EPA, OSHA, ISO 13485:2003)., • Responsible for facility registrations, renewals, and document submissions to regulatory agencies (eg Drug and Cosmetic listings, etc), under the direct supervision of the Head of Quality/Regulatory., • Assist the Manager of Regulatory Affairs during periodic quality reviews, regulatory updates, and annual GMP training., • Familiar with SOPs generation process, Specification controls, and Change Control program., • Familiar with quality management system (QMS) in compliance with 21CFR 210, 211, and 820; and key elements of ISO 13485:2003., • Maintain familiarity with changing global regulatory requirements., • Minimum of Bachelor degree (Life Sciences, Engineering, related profession)., • Experience of drug, cosmetic, medical device regulatory process is a pre-requisite., • Familiarity with FDA requirements under 21CFR 210, 211, & 820 is a pre-requisite., • Two+ years industry or related experience in any combination of cosmetic, medical device, food, or pharma is required., • Previous regulatory, inspecting, auditing or manufacturing experience - a plus., • Data analysis skills - a plus., • Computer literate and effective communication skills., • Pay range: $60,000 - $65,000 per year, • Medical, Dental, and Vision Insurance, • Life Insurance, • 401k match, • PTO Powered by JazzHR Bnx5PV2JZt

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Role Description We are seeking a motivated Full-Time (On-Site) Civil Site Engineer / Assistant Project Manager to join our dynamic team specializing in Land Development projects across New Jersey and New York. This role offers an excellent opportunity to contribute to Diverse Projects, including Residential, Commercial, and Industrial Developments. The role will be in our DaeTel Engineering Office located in Mountain Lakes / Parsippany, NJ. The Role involves Project Management, Coordination with Project Stakeholders, Quality Control Oversight, Civil Engineering Design / Planning, and collaborating with other Civil Engineers. Key Responsibilities: • Conduct site feasibility studies, Site Investigation, and Due Diligence to ensure compliance with project Specifications and Local Regulations / Ordinances., • Prepare Civil Engineering Designs and Plans, including Site Layout, Grading, Drainage, Utility Design and Soil Erosion & Sediment Control Plans using CAD software (e.g., AutoCAD Civil 3D)., • Project Management and Quality Control skills, • Participate in project meetings and contribute to problem-solving discussions., • Collaborate with Senior Engineers, Architects, and Planners on Land Development Projects., • Preparation of Permit Applications, Reports, and Engineering Calculations in compliance with local municipal, County (including SCD) and State requirements., • Ability to Prepare construction documents, technical specifications, and cost estimates., • Ability to Prepare NJDEP Flood Hazard Area (FHA), Treatment Work (TWA) & Sewerage Authority Applications, • Research and apply relevant local, state, and federal regulations affecting land development., • Bachelor’s degree in Civil Engineering or a related field., • Minimum 3 years of Experience in Civil engineering, with a focus on Civil Land development, • Proficiency in AutoCAD Civil 3D, HydroCAD, Storm Sewers, Bluebeam and other engineering software., • Familiarity with Stormwater Management, Grading, and Drainage Design., • Understanding of New Jersey-specific regulations, including NJDEP, NJDOT and local zoning codes, • Strong analytical, organizational, and problem-solving skills., • Excellent written and verbal communication skills., • Ability to work collaboratively in a team environment and manage time effectively., • Experience in Structural Engineering a plus, • Engineer-In-Training (EIT) certification (required), • Professional Engineer (PE) license is a plus or intent to obtain within one year, • Paid time off, • Paid holidays, • Collaborative, family-oriented workplace cultureCompany DescriptionDaeTel Engineering is a Civil Engineering Firm which engages in a wide range of Projects spanning from Infrastructure, Transportation Projects, Residential, Commercial, as well as Energy and Utilities Projects throughout the Nation. We are engage in all aspects of Engineering for both Infrastructure and Land Development including Utilities, Roadways, Drainage, Water, Sewer and Complex Stormwater Management Systems and Permitting.DaeTel Engineering is a Civil Engineering Firm which engages in a wide range of Projects spanning from Infrastructure, Transportation Projects, Residential, Commercial, as well as Energy and Utilities Projects throughout the Nation. We are engage in all aspects of Engineering for both Infrastructure and Land Development including Utilities, Roadways, Drainage, Water, Sewer and Complex Stormwater Management Systems and Permitting.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionJob Title: ElectricianJob Description We are seeking a skilled electrician with a strong ability to work with various conduit systems, including 90's, three-point saddles, offsets, and 45's. The ideal candidate will be proficient in conduit bending over obstructions, using a cyclone bender, and have a firm understanding of NEC code. Responsibilities include pulling wire through conduit, installing conduit runs, and working with exposed conduit and overhead EMT racks. Responsibilities • Bend conduit to navigate obstructions using techniques such as 90's, three-point saddles, offsets, and 45's., • Operate a cyclone bender effectively., • Understand and apply NEC code in all electrical installations., • Install conduit runs, exposed conduit, and overhead EMT racks., • Perform wire pulls through conduit., • Rough in wiring and pull MC and BX cables., • Install outlets and panels., • Proficiency in conduit bending and installation., • Experience with roughing in wire and pulling MC & BX cables., • Ability to read and interpret electrical blueprints., • OSHA 30 certification. Join a leading electrical firm in NYC that offers a pathway to permanent employment after six months of perfect attendance. Enjoy comprehensive benefits, including medical, dental, vision, and a 401k plan, ensuring a secure and rewarding career. Work Environment Work is located at 111 West 57th Street, Manhattan, NY, with hours from 7:00 am to 3:00 pm. The role requires full personal protective equipment (PPE) and the use of hand tools and a cordless drill. Job Type & Location This is a Contract position based out of Parsippany-Troy Hills, New Jersey. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Parsippany-Troy Hills,NJ. Application Deadline This position is anticipated to close on Sep 23, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • Trains research assistants and graduate students, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Preparation of proposal estimates of time and expenses required to complete project., • Involved in the sales and marketing of company services and secures new business Qualifications: • Master’s degree preferred in related field, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Licensed Site Remediation Professional (LSRP) license preferred., • 40-hour OSHA HAZWOPER certification, • FE/EIT Certification preferred, • Licensed Site Remediation Professional (LSRP) preferred, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $120,000–$175,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Overview Prepares technical and clerical tasks associated with the preparation, labeling and dispensing of pharmaceuticals. Plays an integral role in the inventory and quality assurance activities. Schedule: Monday - Friday 9:00am - 5:30pm • Competitive Pay, • Health, Dental, Vision & Life Insurance, • Company-Paid Short & Long-Term Disability, • Flexible Schedules & Paid Time Off, • Tuition Reimbursement, • Employee Discount Program & DailyPay, • 401k, • Pet Insurance Responsibilities • Coordinates and facilitates new referrals and admissions through collaboration with nurses, customer service and distribution, • Conducts and documents initial and ongoing assessment of specific patient, drug and disease information to identify real and potential drug-related problems or needs, • Escalates to a clinician as needed, • Answers inquiries from patients, families, physicians and other healthcare professionals. Escalates to a clinician as needed, • Maintains thorough and appropriate documentation in the customer/patient record of all clinical activities and communication with patients, physicians and other healthcare professionals, • Coordinates and schedules the preparation of IV therapies and home medical equipment orders with the assistance of the Pharmacist, • Helps coordinate patient care activities with Pharmacists, Nurses, other Technicians and Patient Care Coordinators, • Prepares labels, prescriptions and compounding/mixing worksheets and completes and maintains product lot numbers, expiration dates and batch records, • Generates delivery/pick slips under the supervision of the Pharmacist. Picks and pulls supplies and home medical equipment, • Obtains supply inventories from patients/clients and communicates information obtained to the Pharmacist as required and documents all communication in patient progress notes on the pharmacy computer system, • Participates in branch management, department and intra-departmental meetings and quality improvement activities, • Adheres to all accreditation, OSHA, FDA, state, local and federal regulations and standards relevant to infusion pharmacy and home medical equipment, • Other duties as assigned, • Supervisory Responsibility: No Qualifications • Successful completion of an approved/accredited pharmacy technician training program; IV certification preferred, • Registered Pharmacy Technician license in state of practice per state regulations, • National Pharmacy Technician Certification as required by the state board of pharmacy in state of practice, • One to three (1-3) years of related pharmacy experience in a home care setting, retail, or pharmacy setting, • General knowledge of drug terminology, pharmaceutical calculations, drug use and aseptic techniques, • Flexible schedule with the ability to work on-call evenings and weekends on an as-scheduled basis, • Effective mathematical and communication skills required, • Basic pharmacy knowledge of reading and interpreting prescriptions, • Ability to work independently, accurately, and efficiently, • Valid driver’s license, preferred Driving Position: Yes To perform this role will require constant sitting and typing on a keyboard with fingers, and occasional standing, and walking. The physical requirements will be the ability to push/pull and lift/carry 10-30 lbs

Job Description Overview Amerita, Inc. is a leading provider in home Infusion therapy. We are looking for a Pharmacy Technician - Compounding to join our Pharmacy team as we grow to be one of the top home infusion providers in the country. The Pharmacy Technician will report to the Pharmacy Manager and work in our City, State branch. Amerita is an entrepreneurial-founded company and a wholly owned subsidiary of PharMerica. The home infusion market is positioned for rapid growth driven by the aging population, increase in chronic diseases, robust pipeline of infusible drugs coming to market, and an industry shift from hospital delivery settings to lower-cost, high-quality alternative providers such as Amerita. As a core member of the Pharmacy team, you will be expected to prepare technical and clerical tasks associated with the preparation, labeling and dispensing of pharmaceuticals. We will help you achieve your goals through continuous professional development and regular career progression discussions. Schedule: Tuesday - Friday 12:00pm - 8:00pm Saturday 10:00am - 4:00pm • Competitive Pay, • Health, Dental, Vision & Life Insurance, • Company-Paid Short & Long-Term Disability, • Flexible Schedules & Paid Time Off, • Tuition Reimbursement, • Employee Discount Program & DailyPay, • 401k, • Pet Insurance Responsibilities • Coordinates and schedules the preparation of sterile mixtures and home medical equipment orders with the assistance of the Pharmacist, • Completes all calculations on product preparation as necessary, • Compounds sterile mixtures and non-mixtures, including, but not limited to parenteral nutrition, antibiotics, chemotherapy, hydration and narcotic analgesics, using aseptic technique where state laws permit, • Ensures compounding/clean room areas and related equipment are cleaned, sanitized and maintained in compliance with company policies and procedures, and USP 797 and USP 800 standards, • Documents all activities on appropriate logs, • Participates in branch management, department and intra-departmental meetings and quality improvement activities, • Adheres to all accreditation, OSHA, FDA, state, local and federal regulations, and USP 797 and USP 800 standards relevant to infusion pharmacy and home medical equipment, • Documents all temperature logs, pressure and humidity monitors, records all sterility testing done in the clean room in compliance with company policies and procedures, and USP 797 and USP 800 standards, • Documents all activities on the appropriate logs, • Other duties as assigned Supervisory Responsibility: No Qualifications • Successful completion of an approved/accredited Pharmacy Technician training program; IV certification preferred, • Registered Pharmacy Technician license in state of practice per state regulations, • National Pharmacy Technician Certification as required by the state board of pharmacy in state of practice, • 1-3 years of related pharmacy experience in a home care setting, retail or pharmacy setting, preferred, • At least 1 year of aseptic preparation of infusion-related pharmaceuticals in a hospital or home infusion setting preferred, • General knowledge of drug terminology, pharmaceutical calculations, drug use and aseptic techniques, • Flexible schedule with the ability to work on-call evenings and weekends on an as-scheduled basis, • Effective mathematical and communication skills required, • Basic pharmacy knowledge of reading and interpreting prescriptions, • Ability to work independently, accurately and efficiently, • Valid driver's license Driving Position: Yes-Minimal driving for patient deliveries may be required To perform this role will require constant sitting and typing on a keyboard with fingers, and ocassionally standing and walking. The physical requirements will be the ability to push/pull and lift/carry 21-30 lbs

Reports To: Mitigation Manager.What Does A Construction Laborer With Paul Davis Do?.Serve others within your community in their time of need.Make a difference for others that have had a disaster strike their property.Work hard and take pride in completing projects (i.Be empathetic and show a sense o

We are seeking a dedicated Construction Laborer to join our team in a role that involves general labor, heavy construction, digging, and site work.This position plays a crucial part in our ongoing projects, ensuring smooth operations and contributing to the community's development.Monitor quarry cru

Aerotek - JobID: JP-005519044 [Construction Worker / Laborer] As a Construction Laborer at Aerotek, you'll: Get hands dirty; Paint and use hand and power tools; Perform other duties as assigned.