Parts jobs in New Brunswick, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications::, • 3-5+ years’ experience as class A or B mechanic, • Computer diagnostic experience is required, • Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus, • Trade school or similar training is a plus Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.64/Hr. Salary Range Maximum: USD $32.64/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a railserved landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were familyowned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Heavy Equipment Technician/Mechanic perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: Transloading, tractor trailers, forklifts,and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • The Heavy Equipment Technician/Mechanic will primarily be working out of our Transloading station at 65 central ave in Kearney, however occasional travel to other sites to pick up parts as well as assisting with emergency breakdowns may be required., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $35.00/Hr. Salary Range Maximum: USD $52.00/Hr.

Every day, Global Payments makes it possible for millions of people to move money between buyers and sellers using our payments solutions for credit, debit, prepaid and merchant services. Our worldwide team helps over 3 million companies, more than 1,300 financial institutions and over 600 million cardholders grow with confidence and achieve amazing results. We are driven by our passion for success and we are proud to deliver best-in-class payment technology and software solutions. Join our dynamic team and make your mark on the payments technology landscape of tomorrow. Director/General Manager of Class Creator Description/Background: Pigeonhole Software - Class Creator (CC) is a proven web-based software solution that delivers automated class design and student wellbeing solutions to customers in more than 20 countries – but predominantly in Australia and the USA. Our tailor-made software automates manual tasks performed by teachers, freeing them to focus on improving school and student outcomes. Class Creator is the trusted solution of choice in over 1,500 schools around the world. Summary of the Position The Director/General Manager (DGM), Class Creator carries dual accountability of leading the CC business and carrying the responsibility for increasing revenue growth through new sales and upsell to existing clients in both established territory and breaking into new markets. CC has scaled rapidly in recent years, and the DGM will be expected to accelerate that growth in all target markets but particularly in the USA. As the most senior member and leader of the CC team, the role carries a broad remit across multiple core functions. The DGM will manage the core operations team based out of Australia which includes the development resources, (2) Developers + (2) offshore contractors, (1) Operations Coordinator, (1) AUS based Sales Representative and (1) Marketing Manager, as well as the US based team comprised of the (2) Customer Success Managers and the (2) Sales Representatives. The DGM will work closely with the AUS Finance team and AUS Marketing Director. The DGM manages various sales teams such as outsides sales, inside sales, channel sales or third party sales responsible for market penetration through campaigns that deliver incremental revenue from new and/or existing clients. Defines and communicates the sales process and the sales effectiveness drivers. Leads and fosters co-operation and collaboration with other functions within the business to maximize efficiency to provide an integrated response to clients' needs. Setting/Executing Strategy and Financial Results Create a vision for the CC Team, and to inspire and lead the broader organization to buy-in, work toward and achieve that vision. Design and execute pragmatic revenue growth plans across existing and new markets. Carry accountability for achieving allocated revenue growth targets across all assigned customer types and geographies. Manage individual performance against plans and report on performance to the leadership team at a team and individual level. Setting/Executing Sales and Marketing Strategy Develop and provide effective consultative sales support to new sales and client services team. Designs pricing models for licensing fees, annual fees, professional service fees, and value added services. Packages new products and services for cross sale to existing clients. Monitors revenue generation in order to secure delivery of financial objectives established in the annual budget. Secures invoicing and revenue recognition. Identifies, negotiates and secures potential business partnerships in order to enhance products and services to new and existing customers. Provides the oversight and control over all aspects of the sales process including qualification criteria and the allocation of leads and opportunities to sales Reps, solution design guidance and approval, content of final response, approval on final customer prices and all legal and commercial negotiation. Maintains accurate pipelines to ensure revenue forecasts are properly reported. Directs campaigns to drive market penetration. Sets the target client profile and metrics to be met by the sales team for the campaign. Approves campaign budget and agent activities and reviews results to determine further investment decisions into that market. Evaluates and assesses industry trends and specific strategies being implemented by key competitors. Works with product and other key internal stakeholders to create market competitive offerings and specific sales strategy to win business from the competition. Executing for Results Set and achieve clear and challenging goals while committing the organization to improved performance; tenacious and accountable in driving results. Provides timely and accurate commercial reporting on business performance, and is capable of presenting and explaining data succinctly and clearly to a diverse range of senior stakeholders. Must be prepared to operate across geographies, including spending extended periods of time in-market both domestically (Australia) and internationally (USA, Canada and potentially other prospective international markets). Work collaboratively across all parts of CC and the broader regional Software business to drive team and organisational success. Minimum Skills and Experience Bachelors Degree from an accredited university and relevant experience in a related field is required Experience in lieu of a degree may be considered, which is typically a minimum 8-10 years in a related profession, including a minimum of 5-6 years' experience in a managerial position Excellent problem solving, troubleshooting, consultation and negotiation skills with the ability to engage with all stakeholder levels Proficient written and verbal communications along with excellent presentation skills, attention to detail, timelines and metrics. To perform this job successfully an individual should have experience with web-based systems and corporate tools such as Microsoft 365, Oracle, Salesforce, etc Preferred Qualifications Masters Degree in a related field Related field of study from an accredited university A recognized tertiary qualification in an appropriate discipline (preferably education). Prior 3-5+ years’ experience in a similar role. Global Payments Inc. is an equal opportunity employer. Global Payments provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex (including pregnancy), national origin, ancestry, age, marital status, sexual orientation, gender identity or expression, disability, veteran status, genetic information or any other basis protected by law. If you wish to request reasonable accommodations related to applying for employment or provide feedback about the accessibility of this website, please contact ___.

Job Description Are you a skilled, reliable and caring Certified Home Health Aide? If so, we'd love to hear from you. We are looking for hourly aides to provide service throughout SOMERSET and NORTH MIDDLESEX Counties. • Cases near Plainfield, Watchung, Somerset, Flemington, Basking Ridge, Branchburg, Bound Brook, Bridgewater, Bedminster, Manville, Hillsborough, North Brunswick, and Princeton., • Morning/Day Shifts, • Pay $19 to $30 per hour., • Orientation Bonus: Receive a $50 bonus upon completion of your orientation. Case #1: • Client lives in Somerset, NJ, • Saturday & Sunday: 3:00 pm to 6:00 pm, • Must have experience with Hoyer Lift, • $21 per hr, • Current NJ CHHA license., • At least 6 months to a 1-year experience preferred., • Driver's License/Reliable transportation., • Treated each other with respect and dignity., • Paid Orientation., • Support is always available., • We value our CHHAs and believe in teamwork! “ComForCare is the best job for me! The staff members are very friendly, very nice, they know what I need and they have always been there for me! It’s the best place for me to work - thank you ComForCare team” “There is a cordial relationship between the management team and the employees which creates a very friendly and peaceful working environment.” “Representatives of ComForCare home care respect their caregivers and receive their caregivers with open hands with a smile face, Love to work with them always” “ComForCare is prompt in responding to caregiver's concerns. They also show appreciation when we caregivers do our job well. This in turn makes me personally, want to make them proud by representing the agency well and boosting the goodwill.” How to contact us: 92 East Main Street, Suite 305, Somerville, NJ 08876 • Call 908-927-0500. Join our team and be a part of a certified Great Place to Work®! Thousands of ComForCare employees were surveyed and the response was overwhelmingly positive, with 90% agreeing that ComForCare is in fact a Great Place to Work®. By selecting the positions below, you acknowledge that you are applying for employment with an independently owned and operated ComForCare franchisee, a separate company and employer from ComForCare and any of its affiliates or subsidiaries. You understand that each independent franchisee is solely responsible for all decisions relating to employment including (and without limitation to) hiring and termination, and ComForCare does not accept, review or store my application. Any questions about your application or the hiring process must be directed to the locally owned and operated ComForCare franchisee. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Company DescriptionComForCare Home Care in Somerville is a locally owned, woman-owned home care agency providing compassionate, person-centered care to clients throughout Somerset County and parts of Northern Middlesex Counties. Our team specializes in helping older adults and individuals with complex care needs remain safe, comfortable, and independent in their own homes. Our agency is licensed, ACHC accredited and committed to the highest standards of care. We provide private duty home care and skilled nursing services with particular expertise in Dementia care. All of our caregivers are W-2 employees who are bonded, insured, and supported by an experienced clinical team. Our owner, an RN and Certified Dementia Practitioner, has been part of the organization for nearly a decade in roles including Director of Nursing and Managing Director before becoming owner. This leadership experience ensures that both our clients and caregivers receive the guidance, support, and respect they deserve. At ComForCare, we believe that great care starts with a supported and valued employee.ComForCare Home Care in Somerville is a locally owned, woman-owned home care agency providing compassionate, person-centered care to clients throughout Somerset County and parts of Northern Middlesex Counties. Our team specializes in helping older adults and individuals with complex care needs remain safe, comfortable, and independent in their own homes.\r\n\r\nOur agency is licensed, ACHC accredited and committed to the highest standards of care. We provide private duty home care and skilled nursing services with particular expertise in Dementia care. All of our caregivers are W-2 employees who are bonded, insured, and supported by an experienced clinical team.\r\n\r\nOur owner, an RN and Certified Dementia Practitioner, has been part of the organization for nearly a decade in roles including Director of Nursing and Managing Director before becoming owner. This leadership experience ensures that both our clients and caregivers receive the guidance, support, and respect they deserve.\r\n\r\nAt ComForCare, we believe that great care starts with a supported and valued employee.

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison NJ Operating Company: Energy Transfer Solutions FLSA Status: Non-Exempt About: Under the guidance of the Service General Manager, the Commercial HVAC Service Technician plays a key role in delivering top-tier service to our customers by expertly installing, servicing, and starting up a wide range of HVAC systems. From first-time installations to diagnosing and repairing complex issues, you’ll be the go-to problem solver our customers count on. Energy Transfer Solutions - A member of the AIR Control Concepts family. Overview: Energy Transfer Solutions is your trusted partner for innovative HVAC solutions. Since 2003, we’ve provided premier equipment, parts, controls, and services to commercial and industrial clients across PA, NJ, and DE. Our expert team delivers tailored solutions, from system design to turnkey installations, ensuring optimal performance and efficiency. With a focus on quality, integrity, and customer success, ETS is committed to enhancing your building's comfort, reliability, and value. Check out our website: Specialty HVAC Solutions, Parts & Services | ETS HVAC Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where neededExperience & Requirements:, • 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • EPA Universal Certification required; OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record; able to pass a background check and drug screening., • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Uniforms, vehicle and phone (as applicable), and a supportive team environment that values your expertise. Air Control Concepts & Energy Transfer Solutions are Equal Opportunity Employers. Powered by JazzHR UCBo9TFXae

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, Monday - Friday, job stability, and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels. Diagnose control circuit failures using schematics and electrical prints. Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required) Verify proper operation of safety circuits, interlocks, E-stops, and guarding systems in accordance with OSHA and NFPA standards. Mechanical Systems: Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment. Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications. Fabricate or modify components as required to support repairs and equipment improvements. Steam & Boiler Systems: Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping. Support safe operation of boiler and thermal systems in compliance with applicable codes and permits. Identify steam-related inefficiencies and failures that impact production, safety, or energy usage. Plumbing, Hydraulics & Pneumatics: Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping. Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors. Identify pressure, flow, or contamination issues affecting equipment performance. Welding & Fabrication: Perform MIG/TIG/Stick welding to support equipment repair and improvements. Maintenance Systems & Documentation • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities. High School Diploma or GED 3 or more years mechanical maintenance experience in an industrial manufacturing environment. Demonstrated knowledge of mechanical equipment, troubleshooting & repair, and safe work practices. Experience working in production environment. Be able to read building and electrical schematics. Basic math skills along with excellent organizational and decision-making skills. Must be able to work independently and efficiently in an often fast-paced environment. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND1

Job Description DEPARTMENT: Tool Room REPORTS TO: Molding Department POSITION DESCRIPTION: The Tool Room Technician produces effective mold and die repairs through the following: fitting components into molds; finishing new products, components, or inserts; assembling pieces when complete; as well as documenting mold repair procedures in IQMS. RESPONSIBILITIES: • Support the Tool Room Supervisor in the process of setup, testing, procedures, training, and updating of IQMS relative to tooling and operations., • Perform accurate, safe and correct setups prior to commencement of operation., • At point of startup, assure no flash, water leaks and other potential issues. Address any known previous problems or issues. Properly test for water leaks and test electrical for any issues., • Comply with the established standardization of mold setup and teardown procedures. Apply learned best practices., • Select, align and secure fixtures, cutting tools, attachments accessories and materials on machines, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required., • Verifies conformance of finished work piece to specs., • Fits and assembles parts into complete assembly., • Verifies dimensions and alignment of assembly., • Perform work within the Tooling Preventive Maintenance program including but not limited to in-mold closings, hoses and water fittings. Utilize IQMS/Kanban to maintain processing related to equipment., • Change non-production molds in advance as needed., • Follow proper procedures including lock-out / tag-out, mold maintenance sheets and others., • Maintain consistent and effective component cleaning and storage., • Maintain liner dies needed for production., • Support OEE/SEE metrics and related goals of cycle attainment, zero-block cavitation, mold set-up compliance, and changeovers to maximize mold efficiency., • Follow the escalation process for tool issues by consistently and openly sharing information with the Tool Room Manager., • Document, standardize and create procedures for repeatability, predictability and improved efficiency specific to related activities., • Perform data entry on shop floor as needed., • Collaborate with Engineering to enable effective vendor sourcing., • Participate in internal machining projects., • Actively participate in tool teardown meetings., • Participate in shift hand-off activity to ensure a smooth shift transition., • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources.

Job Description Drive reliability at OEG Building Materials Picture this: Production is humming at our steel manufacturing facility when a propane lift triggers a fault. You arrive with a plan—evaluate hydraulics, verify electrical continuity, check fuel delivery—then execute a safe, efficient fix. If that sounds like your kind of challenge, we want you on our team. About the Role Company: OEG Building Materials Job Type: Full-time Reports To: Department Manager Setting: Warehouse/industrial; indoor and outdoor work FLSA Status: Non-Exempt Mission Ensure our propane and diesel forklift fleet is safe, compliant, and always ready. You’ll be the reliability champion who blends technical expertise with clear communication and meticulous documentation. Core Accountabilities • Perform diagnostics, repairs, and PMs on LPG and diesel forklifts, • Troubleshoot mechanical, electrical, hydraulic, and fuel system issues, • Conduct safety-focused inspections and confirm operational readiness, • Repair/replace engines, transmissions, brakes, steering, and related assemblies, • Keep complete, accurate maintenance and service records, • Uphold OSHA and company safety standards at every step, • Respond swiftly to breakdowns to limit downtime, • Report findings, parts needs, and recommendations to management What Sets You Up for Success, • Experience as a forklift or heavy equipment mechanic, • Required: hands-on work with propane and diesel forklifts, • Deep understanding of mechanical, hydraulic, and electrical systems, • Competent in reading schematics and service manuals, • Valid driver’s license; forklift certification is a plus, • Able to lift up to 50 lbs; comfortable in warehouse and outdoor conditions, • Strong attention to detail and diagnostic problem-solving Preferred Background, • Trade or technical certification in mechanical repair, • Experience with multiple forklift manufacturers, • Welding or fabrication exposure Schedule & Environment, • Full-time; schedule may vary based on operational needs, • Warehouse/industrial setting Compensation & Benefits, • Pay: $25.00 - $32.00 per hour (non-exempt), • Health Insurance (details provided upon hire), Medical, Vision, Dental, • 401(k) with 4% company match, • Company Holidays + Jewish Paid Holidays, • 5 Sick Days (accrued annually)

Job DescriptionDescription: We are seeking to fill the position for a machinist professional with tool and die experience. The position will involve working in a production remanufacturing facility in multiple levels as part of the production team, with strict deadlines, and will be capable of working independently as well as part of a collaborative team. The essential duties include manufacturing and ensuring the quality of machined parts, tools and assemblies, and fixtures, and verifying that all material specifications are being accurately met. Job Responsibilities: • Manual milling, manual turning, OD grinding, surface grinding as well as secondary/finishing work, • Study specifications, such as blueprints, sketches, or descriptions and visualizes product to make recommendations for continuous improvement., • Must be able to fit and assemble parts to make and repair shafting, jigs, and fixtures, and hydraulic assemblies, applying knowledge of tool design and construction, shop mathematics, metal properties, lay out, machining and assembly procedures., • Machining of complex parts in small lots., • Follow all safety procedures while operating machine tools., • Ability to lift machined parts manually and position and hold them on surface plate or worktable using devices such as vises, V-blocks, and angle plates., • Report unusual problems or conditions to supervisor., • Observe company safety rules and regulations., • Basic mechanical skills needed., • Perform, as assigned, other similar or related duties., • Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation., • Ability to work occasional weekend shifts., • Ability to work overtime as required., • Willingness to wear personal protective equipment, for example: safety glasses, gloves, ear plugs, and safety shoes.Requirements: Requirements • 5+ years of production and/or small lot machining experience., • Proficiency in various machining operations., • Must have the ability to work from prints and sketches and understand dimensions and required tolerances., • Candidate must be familiar with a variety of materials, steels, bronze, aluminum, etc., • Strong experience reading and understanding measuring instruments; micrometer, caliper, inside micrometer.

Job Description Essential Duties and Responsibilities: Maintenance Mechanic • Perform routine preventive maintenance checks on all production equipment and machinery., • Replaces or repairs parts on machines such as bearings, filter, wiring, valves, gauges and switches., • Replaces electrical parts and equipment., • Observes and listens to mechanical devices in operation to locate causes of trouble., • Dismantles devices to gain access to and remove defective parts., • Examines form and texture of parts to detect imperfections., • Inspects used parts to determine changes in dimensional requirements., • Adjusts functional parts of devices and control instruments., • Repairs or replaces defective parts. Installs special functional and structural parts in devices., • Lubricates and cleans parts., • Start devices to test their performance., • Initiates purchase order for parts and machines., • Required to participate in on-call program and may be required to work additional hours as required., • Ability to use a variety of common hand and power tools. Basic understanding of electrical and mechanical properties., • Follows all safety rules and procedures and observes the operations to insure a safe environment., • Upholds Site and Corporate Environmental Policies by following all Environmental Policies, Procedures and Work Instructions., • 3-5 years’ Maintenance Mechanic experience with industrial machinery., • Experienced understanding of electrical, pneumatic, and hydraulics., • Posses understanding of systems, equipment and schematics., • Knowledge of diagnostic testing to ensure system functionality., • Mechanical troubleshooting skills, • Ability to repair broken or faulty machine parts., • Blow-molding or Injection-molding experience., • Basic mathematical skills involving mechanical aptitude. Job Type: Full-time Salary: $25.00 - $35.00 per hour Schedule: • Day shift, • Monday to Friday

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime. Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st Shift: 7:30am-4pm. Shift hours may vary based on business needs.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This position is responsible for performing a wide range of semi-skilled and skilled maintenance, repair, and restoration work across manufacturing, office, and support areas. This role supports the installation and relocation of production and office equipment, monitors and performs minor upkeep of major utility systems, and ensures general building, grounds, and facility operations are maintained in a safe and functional condition. Key systems supported include air compressors, furnaces, chillers, vacuum pumps, HVAC equipment, plumbing, and general building infrastructure. This position plays a critical role in maintaining production readiness and overall facility reliability. Key Responsibilities: • Support daily operations of manufacturing plants, buildings, and office areas under the direction of the Facilities Director and Facilities Supervisor, • Install, relocate, and remove production equipment using rigging, forklifts, pallet jacks, equipment skates, and similar tools, • Connect equipment to facility utilities including water, coolant, compressed air, vacuum, and wastewater drainage, • Maintain and repair building systems and components including doors, turnstiles, plumbing fixtures, leaks, locks, stairs, racking, guardrails, monitors/TVs, wastewater pumps, and related infrastructure, • Relocate office furniture and equipment; install or remove cubicles, signage, shelving, worktables, and filing cabinets as needed, • Serve as the first line of response to facility and production support issues prior to engaging external contractors for major system repairs (e.g., air compressors, vacuum pumps, furnaces, chillers, RODI systems, nitrogen systems), • Technician is not expected to perform major equipment repairs but must understand system operation and provide temporary solutions and guidance, • Conduct daily facility and property inspections to identify safety concerns and take immediate corrective action, • Perform a broad range of skilled maintenance tasks over extended periods, • Complete work in compliance with OSHA regulations and safety practices, including lockout/tagout procedures, • Read and interpret sketches, diagrams, and blueprints, • Fill in for janitor/custodial functions, when necessary., • Source parts for repairs and regular maintenance., • Coordinate with external service providers for equipment and facilities repair, when required., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices., • A minimum of 7 years of Maintenance Experience. Including methods, practices and equipment used in facilities management and activities, including a variety of building trades work., • High School Graduate required. College or Trade School preferred., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • Knowledge of tools and equipment used in building maintenance, reconstruction and repair work., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Versatile "jack-of-all-trades" maintenance skill set, • Plumbing experience required, primarily PVC socket weld and occasional threaded pipe, • HVAC experience strongly preferred, • General mechanical aptitude, • General construction knowledge (e.g., wall repair, painting), • Must be able to lift 70 lbs, • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Majority of facilities are air-conditioned year-round At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description Building Service Tech Base Pay: $22.00 - $30.80 per hour 2nd Shift: 3:45 PM - 12:15 AM Mon - Fri DUTIES AND RESPONSBILITES Performing property maintenance with basic plumbing, electrical, and carpentry skills • Patching, painting, and completing repairs on buildings and ground facilities, • Position duties require a full range of motion, must be able to bend, stand, stoop, kneel, reach, walk, and lift for extended periods of time, • Repair/troubleshoot air conditioning units, • Perform routine and preventive maintenance, • Maintain cleaning logs and maintenance logs; related to inspections, • Wear PPE required by the company., • Able to work in inclement weather conditions and perform work in outdoor environments.Qualifications, • Observe safety standards in a safe manner at all times, • Be able to work overtime when required, • Be able to safely drive a forklift truck, • Must have experience using small power and hand tools The physical demands are representative of those that must be met by employee to successfully perform the essential functions of this job. Reasonable accommodations may be made upon request to enable individuals with qualified disabilities to perform the essential functions of the job. • Must possess strength, stamina and mobility to perform heavy physical work with exposure to potentially hazardous conditions, • Will use a variety hand and power tools, may drive a motor vehicle and/or light construction equipment, fork trucks, platform lifts etc., • Lift and move materials and equipment weighing up to 90 pounds and heavier weights with the use of proper equipment and assistance, • Must be able to read printed materials and a computer screen, • While performing the duties of this job, the employee is regularly required to walk; use fingers and hands to handle or feel; reach with hands and arms; stoop and kneel; talk and hear, • The employee is frequently required to stand and sit for long periods, as well as occasionally be required to climb or balance, • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus, • Exposure to variable temperatures as impacted by the weather Work Environment Mainly a manufacturing facility, where exposed to moving mechanical parts, forklifts, heavy pallets, moderate to loud noise level, and air-borne dust, powders, and fumes. While working, will be required to wear various personal protective equipment (e.g., clothing, gloves, goggles, safety glasses, steel toed shoes, cut resistant aprons, etc.) based on work area or task. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for ensuring the continuous functionality of all production equipment. Key Responsibilities: • Perform regularly scheduled preventive maintenance on all production equipment and machinery., • Perform emergency repairs on all production equipment and machinery., • Conform to all procedures regarding spare parts usage., • Perform repairs and maintenance according to any and all OSHA and other safety requirements, i.e.: lockout/tagout., • Perform all maintenance and repairs in an accurate, complete and timely manner., • Maintain mechanical availability of all production equipment., • Maintain mechanical availability of all facility equipment. Other Important Responsibilities: • Maintain a daily log of Preventive Maintenance and downtime through Computerized Maintenance Management System, Simplicity CMMS, • Maintain a daily work log and EOD/end of day email report to Upper management., • Assist the Parts Inventory Clerk with proper specs and info when sourcing parts for repairs and regular maintenance., • Work with outside contractors during routine maintenance and emergency repairs., • Timely Corrective Action response and resolution to relevant situations., • As required, will install new equipment, facility upgrades, perform repair work as needed and support production., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 7-10 years (or more) of relevant experience., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • High School Graduate required. Vocational Degree Preferred., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative. Physical requirements and work environment: • Must be able to lift 70 lbs., • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Mechanics must provide all industry required hand tools and tool box. Checklist will be provided. All specialty tools will be provided by CompoSecure. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Location: Piscataway, NJ Position: Full-time Title: 26-00418 - Tool and Die Maker Job Description: • We are actively seeking a skilled and detail-oriented Tool and Die Maker with expertise in deep drawn metal stamping to join our dynamic manufacturing team., • This role is critical to our operations, as you will be responsible for the design, fabrication, and maintenance of precision tools and dies utilized in the production of complex metal components., • Your work will directly impact product quality and manufacturing efficiency. Responsibilities: • Utilize advanced CAD software to design and create tooling and dies tailored specifically for deep drawing applications, ensuring they meet stringent specifications and production requirements. You will fabricate components using various machining techniques, including milling, grinding, and electrical discharge machining (EDM)., • Skillfully prepare and set up automated and manual stamping presses for production runs. This includes aligning and securing dies, adjusting settings for material thickness and type, and ensuring consistent operation to achieve optimal quality and production rates., • Implement and adhere to rigorous quality control procedures. Conduct regular inspections and assessments of both tools and the metal parts produced, utilizing precision measurement tools (such as calipers, micrometers, and gauges) to ensure compliance with tolerances and specifications. Document any deviations and collaborate with quality engineers to rectify issues., • Execute routine maintenance and repair work on tools, dies, stamping machines, and ancillary equipment to enhance their lifespan and efficiency. Troubleshoot mechanical and operational issues as they arise, using diagnostic tools and your extensive knowledge of hydraulic and pneumatic systems., • Work closely with product design engineers to discuss tooling design modifications and improvements based on production experiences. Participate in cross-functional team meetings to address production challenges, ensuring that tools and processes align with evolving project requirements., • Maintain comprehensive and precise documentation of tooling specifications, maintenance schedules, and production logs. This will include creating detailed reports on tooling performance, material usage, and production yield metrics, ensuring compliance with industry standards and internal procedures., • Actively participate in continuous improvement projects, leveraging Lean Manufacturing principles to propose and implement enhancements to tooling designs and production processes. This may involve analyzing production data to identify trends and areas for improvement. Requirements: • A minimum of 5 years of proven experience as a Tool and Die Maker, specifically within deep drawn metal stamping operations, with a solid track record of successful project completion., • Advanced proficiency in reading and interpreting complex blueprints, technical drawings, and schematics, along with strong mathematical skills for accurate measurements and calculations., • Thorough understanding of machining processes, materials (including stainless steel, aluminum, and composite materials), and advanced heat treatments relevant to tool manufacturing., • Familiarity with precision measurement tools and techniques, along with experience using CNC machinery and programming for tool production., • Excellent analytical and problem-solving skills, with a keen attention to detail and the ability to identify root causes of issues in tooling and production., • Proven capability to work independently, exercise initiative, and collaborate effectively as part of a cohesive team in a fast-paced, high-volume manufacturing environment. Education: • High school diploma or equivalent; technical degree or certification in tool and die making, machining, or a related field is preferred. Working Conditions: • This position involves exposure to metalworking machinery, raw materials, and sometimes hazardous elements, necessitating strict adherence to safety protocols and regulations., • The role may require prolonged periods of standing and the ability to lift and move heavy objects, as well as flexibility to work overtime or shift hours as production demands dictate.

At EVERSANA, we are proud to be certified as a Great Place to Work across the globe. We’re fueled by our vision to create a healthier world. How? Our global team of more than 7,000 employees is committed to creating and delivering next-generation commercialization services to the life sciences industry. We are grounded in our cultural beliefs and serve more than 650 clients ranging from innovative biotech start-ups to established pharmaceutical companies. Our products, services and solutions help bring innovative therapies to the market and support the patients who depend on them. Our jobs, skills and talents are unique, but together we make an impact every day. Join us! Across our growing organization, we embrace diversity in backgrounds and experiences. Improving patient lives around the world is a priority, and we need people from all backgrounds and swaths of life to help build the future of the healthcare and the life sciences industry. We believe our people make all the difference in cultivating an inclusive culture that embraces our cultural beliefs. We are deliberate and self-reflective about the kind of team and culture we are building. We look for team members that are not only strong in their own aptitudes but also who care deeply about EVERSANA, our people, clients and most importantly, the patients we serve. We are EVERSANA. Job Description The Virtual Sales Representative (VSR) will be responsible for marketing and selling CARDAMYST via teleconference and/or telephone to targeted health care offices and providers, in close partnership with aligned field representatives. They will deliver impactful core selling messages and educational materials as part of their remote engagements, reinforcing in-person efforts and expanding overall reach. VSRs will need to be flexible regarding job responsibilities as they will include a variety of strategic tasks: amplifying call frequency with high-priority targets, triaging and qualifying targeted HCPs, supporting large geographic territories, and engaging aligned sales team micro-focus practitioners. The VSR will create positive, coordinated virtual selling interactions that drive awareness, adoption, and market growth for CARDAMYST. Additionally, they will possess excellent customer service skills and polished marketing and sales acumen to cultivate current office targets and develop new healthcare provider relationships within those offices. These skill sets will also be critical in educating on the clinical profile and first-in-class value of assigned products, addressing questions and concerns, and identifying signals of adoption. Furthermore, they will demonstrate the ability to learn complex medical topics, industry compliance guidelines, patient assistance programs, and navigate pharmacy and insurance landscapes to support account needs. EVERSANA Deployment Solutions offers our VSRs competitive hourly compensation, lucrative bonus potential, paid time off, company paid holidays, excellent training, employee development programs, a 401-k plan with employer match, and a comprehensive benefits package including medical, dental, and vision insurance, along with many additional valuable programs. Essential Duties And Responsibilities Our employees are tasked with delivering excellent business results through the efforts of their aligned field partners. These results are achieved by: • Complete assigned product training at an advanced level, developing a comprehensive understanding of the disease state, assigned product features and benefits, core selling messages, and the clinical profile of a first-in-class therapy., • Develop expertise in delivering core selling messaging in a virtual environment, reinforcing field strategy and tailoring discussions based on HCP interest level and engagement signals., • Meet or exceed call expectations, quality engagement metrics, and sales attainment goals set forth by the Client., • Maintain complete and timely CRM documentation of targeted customer interactions, including call attempts, product discussions, expressed level of interest, and literature requests., • Develop business relationships with field team to maximize coverage of shared targets., • Ensure high level of coordination, communication, and collaboration with field-based representative counterparts and field-based Regional Sales Manager. Ensuring that efforts are aligned and coordinated to provide a superior customer experience., • Coordinate regularly with field-based counterparts to ensure seamless execution of customer interactions and scheduling as appropriate., • Complete tasks and participate in projects as assigned by the field based Regional Sales Manager, as needed., • Provide actionable insights and feedback to field partners and team leadership regarding account sentiment, adoption signals, and opportunities for increased engagement., • Comply with all company, PDMA, compliance, and regulatory policies and guidelines., • Work independently from a remote home office while collaborating cross-functionally in a coordinated territory model., • Cultivate an assigned virtual territory in alignment with field strategy and be accountable for measurable business results and engagement outcomes., • All other duties as assigned. Qualifications MINIMUM KNOWLEDGE, SKILLS AND ABILITIES: The requirements listed below are representative of the experience, education, knowledge, skill and/or abilities required. • Bachelor's degree from an accredited college or university OR equivalent experience, • 1+ year of sales experience in an outbound Virtual/Tele-sales or field sales role in a healthcare or pharma field required, • Experience selling in the Cardiovascular space preferred, • Proficiency in Microsoft Office software, especially Word, Excel and Outlook required with the ability to learn new software as needed., • Excellent communication & rapport building skills., • Ability to articulate complex clinical data., • Ability to learn complex medical topics, industry compliance guidelines, patient assistance programs, pharmacy, and insurance landscapes., • Aptitude and confidence to converse with physicians, as well as all levels of medical office staff., • Stable internet connection adequate to support voice over VoIP calls and virtual calls platforms. Additional Information OUR CULTURAL BELIEFS Patient Minded - I act with the patient’s best interest in mind. Client Delight - I own every client experience and its impact on results. Take Action - I am empowered and hold myself accountable. Grow Talent - I own my development and invest in the development of others. Win Together - I passionately connect with anyone, anywhere, anytime to achieve results. Communication Matters - I speak up to create transparent, thoughtful and timely dialogue. Embrace Diversity - I create an environment of awareness and respect. Our team is aware of recent fraudulent job offers in the market, misrepresenting EVERSANA. Recruitment fraud is a sophisticated scam commonly perpetrated through online services using fake websites, unsolicited e-mails, or even text messages claiming to be a legitimate company. Some of these scams request personal information and even payment for training or job application fees. Please know EVERSANA would never require personal information nor payment of any kind during the employment process. We respect the personal rights of all candidates looking to explore careers at EVERSANA. EVERSANA is committed to providing competitive salaries and benefits for all employees. If this job posting includes a base salary range, it represents the low and high end of the salary range for this position and is not applicable to locations outside of the U.S. Compensation will be determined based on relevant experience, other job-related qualifications/skills, and geographic location (to account for comparative cost of living). More information about EVERSANA’s benefits package can be found at eversana.com/careers. EVERSANA reserves the right to modify this base salary range and benefits at any time. From EVERSANA’s inception, Diversity, Equity & Inclusion have always been key to our success. We are an Equal Opportunity Employer, and our employees are people with different strengths, experiences, and backgrounds who share a passion for improving the lives of patients and leading innovation within the healthcare industry. Diversity not only includes race and gender identity, but also age, disability status, veteran status, sexual orientation, religion, and many other parts of one’s identity. All of our employees’ points of view are key to our success, and inclusion is everyone's responsibility. Consistent with the Americans with Disabilities Act (ADA) and applicable state and local laws, it is the policy of EVERSANA to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for EVERSANA. The policy regarding requests for reasonable accommodations applies to all aspects of the hiring process. If reasonable accommodation is needed to participate in the interview and hiring process, please contact us at . Follow us on LinkedIn | Twitter

Great company. Great people. Great opportunities. If you'd like the chance to make your mark with the world's largest equipment rental provider, come build your future with United Rentals! As a Field Diesel Mechanic - Customer Equipment Solutions (CES), you'll use your skills to perform maintenance and repairs of complex equipment on customer-owned equipment with limited or no supervision in a highly skilled, safe, and professional manner. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work towards higher levels of Service Technician and leadership roles in our Service Department. Like every member of our team, we will rely on you to provide exceptional customer service to our customers. What you'll do: • Safe maintenance and repair of complex mechanical, electrical, hydraulic, and diesel systems on a variety of customer equipment and tools while using a high degree of independent judgment, • Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis, • Upsell and demonstrate a wide array of complex equipment for customers, • Travel to customer job sites for repair/maintenance of customer-owned equipment; must maintain service vehicle in a clean and professional manner, • Assist with pick-up and delivery of equipment & parts, • Other duties assigned as needed Requirements: • High School diploma or equivalent, • Valid driver's license with an acceptable driving record, • 3-5 years of experience repairing/maintaining equipment and tools, • Advanced mechanical aptitude and working knowledge of tools, • Knowledge of construction equipment and strong mechanical background knowledge of various engines, • Must own tools applicable to the position, • Superior customer service, teamwork, and verbal/written communication skills, • Ability to frequently lift items up to 45 lbs. This position is deemed Safety Sensitive for purposes of United Rentals' policies and procedures. Why join us? We don't just "talk the talk!" We're an award-winning company (recently named a Glassdoor Best Place to Work in 2026) that truly cares about our people - That's why we offer best-in-class benefits and perks that will support you and your family. In addition to our health and financial plans, we also offer: • Paid Parental Leave, • Employee Discount Program, • Career Development & Promotional Opportunities, • Additional Vacation Buy Up Program (US Only), • Early Wage Access through Payactiv (US Hourly Only), • Paid Sick Leave, • An inclusive and welcoming ___ Learn more about our full US ___ here. United Rentals, Inc. is an Equal Opportunity Employer and makes employment decisions regardless of race, color, religion, sex, national origin, age, genetic information, citizenship status, veteran status, sexual orientation, gender identity, disability, or any other status protected by law. If you need a reasonable accommodation at any point of the application process, please email for assistance. At United Rentals, we proudly hire active duty members, veterans, reservists, and their families. The values that define your service-leadership, discipline, integrity, and teamwork-are the same values that drive our success. With many veterans already part of our team, we're ready to help you transition into a rewardingcareer. United Rentals consists of a wide variety of roles with different duties and responsibilities. The actual pay rate offered to candidates varies depending upon a wide range of factors including specific position, education, training, experience, skills, and ability. Compensation Range: $24.00 - $42.00

JOB DESCRIPTION: • Utilizing the Intermec handheld scanners, the parts handler will be responsible for processing parts order activities and maintaining associated paperwork., • Receive, pick, package, and sort parts orders ensuring accuracy of delivery location., • Will unload, sort and stage daily stock., • Participate in inventory counting/surplus/relocations throughout the year., • Parts handler will verify part location and quantity picked for each line item., • Research and assemble hydraulic hoses., • Maintain safety and housekeeping areas., • Back up to parts driver as needed., • Assisting customers directly with Will Call orders., • Picking/Loading orders, • Process returns, • Receiving orders based on priority, • Follow up on orders that are awaiting pick up. RECOMMENDED QUALIFICATIONS: • Ability to work in a fast-paced environment., • Mechanical knowledge and ability to use basic tools., • Must be able to lift at least 50 pounds., • Excellent communication and customer service skills., • Strong organizational skills and attention to detail., • Forklift experience., • Strong computer skills and experience with handheld scanners. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description This position is eligible to make commissions JOB DESCRIPTION: • Generate leads by cold-calling potential customers from lists generated by Sales and Marketing., • Qualify and pass leads for walk-in customers, Marketing campaigns, Caterpillar, and internal leads created by the parts and service team., • Collect and maintain customer information, including contact information, address, phone, and email addresses., • Maintain entire library of sales and technical product literature. Promptly provide all customers and potential customers with up-to-date product literature upon request., • Outbound calls to drive attendance at Marketing events., • Act as information contact point noted on Marketing campaigns., • Follow-up customer service calls after sales to gauge satisfaction with sales process. RECOMMENDED QUALIFICATIONS: • Bachelor’s degree and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Communication, time management and organizational skills., • Self-starter and work with minimal supervision., • Excellent communication and interpersonal skills; both verbal and written., • Experience with Microsoft Office, Excel, Word and CRM systems. Effective communication and interpersonal skills; both verbal and written., • Bilingual, a plus Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job DescriptionPay: $20–$30 per hour Schedule: Flexible schedule / After‑school hours Setting: Home‑based cases / Clinic cases About Circle Care Services Circle Care Services provides compassionate ABA therapy for children on the autism spectrum. We support our team with strong supervision, clear guidance, and a positive work environment. Whether you’re already certified or working toward your RBT credential, we’ll help you grow your skills and build a meaningful career in ABA and behavioral health. About the Role As a Behavior Technician or Registered Behavior Technician (RBT), you will work one‑on‑one with children in home, school, or clinic settings, implementing ABA programs designed by a supervising BCBA. Responsibilities -Provide ABA therapy under BCBA supervision -Follow treatment and behavior intervention plans -Collect and track session data -Support skill development and promote positive behavior -Share progress with your clinical team -If you love working with children- or have experience as a nanny, babysitter, teacher, or paraprofessional- you may be an excellent fit for this role Why You’ll Love Working With Us -Flexible scheduling -Supportive supervision and ongoing feedback -Competitive pay ($20–$30/hour) -Opportunities to grow in ABA and behavioral health -Support to complete your RBT certification if not already certified Requirements -High school diploma -At least 18 years old -Reliable transportation and valid driver’s license -Organized, dependable, and open to feedback -Interest in behavioral health -Willingness to complete RBT certification if not already certified Equal Opportunity Employer / AI Disclosure Circle Care Services is an equal opportunity employer committed to diversity and inclusion. We prohibit discrimination and harassment of any kind as outlined by federal, state, and local laws. We may use AI tools to support parts of the hiring process, but all final hiring decisions are made by humans. If you would like more information about how your data is processed, please contact us. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Title: Registered Behavior Technician (RBT) / Behavior Technician Hours: Part-time / After-school hours Pay: $20 - $30 / hour About Circle Care Services Circle Care Services is a trusted provider of Applied Behavior Analysis (aba) therapy for children on the autism spectrum. We are committed to expert treatment, innovative techniques, and compassionate, child-centered care at families’ convenience. Our team culture focuses on clinical guidance, respect, training, accommodations, and strong support so you can succeed as an RBT and grow in your career. Job Summary As an Behavior Technician, you will work directly with children with autism in the home, school, or clinic setting. This role is a hands-on behavior technician position where you will implement aba therapy programs and help support meaningful progress. Provide aba therapy services as an aba therapist under BCBA supervision Implement treatment plans developed by a supervising BCBA Collect session data and follow behavior intervention protocols Support skill-building and reduce behaviors that interfere with daily life Communicate session progress with the supervising clinical team Job Highlights Flexible scheduling (ideal for after-school availability) Excellent on-the-job training and support Opportunity for growth in aba and behavioral health Consistent supervision and feedback Benefits Part-time benefits may include: Paid training Supervision hours and ongoing coaching Flexible scheduling options Career development opportunities and growth pathways Requirements High school diploma At least 18 years of age Personal means of transportation with a reliable vehicle Well-organized, flexible, and receptive to feedback Willingness to complete training requirements for the registered behavior technician role (if not already certified) Interest in behavioral health and working as a behavioral health technician Equal Opportunity Employer / AI Disclosure Circle Care Services is an equal opportunity employer committed to diversity and inclusion. We prohibit discrimination and harassment of any kind as outlined by federal, state, and local laws. We may use AI tools to support parts of the hiring process, but final hiring decisions are made by humans. If you would like more information about how your data is processed, please contact us. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

JOB DESCRIPTION: • Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed., • Perform necessary troubleshooting and notify Service Manager of outstanding issues., • Expected to complete tasks with no/limited supervision., • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit., • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications, • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines., • Willing to respond to after-hour emergency calls as directed by supervisor., • Test the part or equipment and perform quality checks after work is complete., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Basic computer skills and good interpersonal and communications skills., • The candidate must have a clean driving record and current driver's license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

JOB DESCRIPTION: • Perform high-quality repair and maintenance on Caterpillar equipment., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues., • Expected to complete tasks with no/limited supervision., • Remove, install, disassemble, and assemble components., • Adhere to safety standards to include contamination control and HAZMAT regulations., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Willingness to learn and adapt to new technologies and procedures., • Paint Prep and painting abilities. RECOMMENDED QUALIFICATIONS: • Experience with Cat/Non-Cat construction equipment., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET is a plus., • Excellent communication and interpersonal skills., • Well-developed technical and troubleshooting skills with strong analytical problem-solving skills. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Job Responsibilities: • Responsible for all deliveries and pickups to various companies, in various locations, • Load and unload trucks, • Deliver parts and material from customer sites, • Pick up parts and materials from customer sites, • Pick up parts and materials from supply houses, • Transport refrigerant tanks to recycling vendor, • Transport scrap to scrap yard Job Requirements/Qualifications: • Minimum high school graduate or equivalent, • Must be able to obtain a DOT Medical Card, • CDL Class B License - a plus, but not necessary, • Valid driver’s license, • Clean driving record, • 1 plus year(s) driver experience, • HVAC knowledge preferred, but not required, • Ability to work early hours, as necessary, • Good communication skills, • Safety conscious, • Team player, • Ability to follow directions, • Ability to deal with all weather conditions, • Ability to lift 50 pounds Salary to Match Experience

Job Description Employer Provided Wages: $25-$38+ Per Hour (Based on experience and Qualifications ABOUT US: AK AIRE LLC Home Service (AKAHS) is located In Middlesex County as is a New Jersey based residential contractor specializing in service, installations, and maintenance in the trades of Plumbing, Heating, Air conditioning, Electrical and Generator systems. AKAHS, has been providing New Jersey Homeowners quality services since 2007, we have been in business for 19 years with 85% repeat business. We are growing our HVAC Division to have an immediate opening for service technicians. We are looking for highly motivated and hardworking individuals to join the company. Our Service Areas include, but not limited to, Middlesex County, Monmouth County, and Ocean County. We focus on the residential marketplace with light commercial. Become part of a team dedicated to safe, quality work. Job Responsibilities : • Perform on-site preventative maintenance, diagnostics, repairs and troubleshooting for customer’s Hot Air Furnace, Air Handlers, Condenser, Heat Pump, etc., • Ability to deal effectively with customer service and technical problems by using experience and personal influence to provide resolution with supporting documentation and explanations of service performed or parts used., • Travel to job sites in service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated to customers, • Be available to work nights or weekends, on a rotating basis, to service emergency needs or our customers, • Maintain proper stock, parts, tools and safety equipment in the vehicle. Document all installed equipment upon arrival; make, model, serial number , type of fuel, necessary test measurements, and pictures as needed., • Diagnose diverse service issues, obtained any replacement parts, calibrate systems to manufacturer's recommendations., • Complete and submit work orders, • Other duties and responsibilities as they are assigned Requirements:, • Minimum 3-5 year experience in maintenance, troubleshooting and correcting diverse HVAC issues, • Excellent verbal & written communication skills., • Ability to work independently in a timely manner, making sure the job is done correctly the first time., • Strong organization skills with close attention to detail., • Ability to multi-task & Prioritize., • Establish & maintain good working relationship with coworker and management., • Team player with a positive attitude. Other Requirements: • well groomed, neat appearance, • valid driver’s license and clean driving record, • valid social security number, • Some computer skills, tablet, or phone, • Lift up to 50 pounds,; be able to push, pull, carry or maneuver heavier items (with additional manpower or appropriate devices)/ carry ladders; work from heights, work in small crawl spaces, • Observe all company procedures and safety rules Work as part of our team to ensure customer satisfaction Work Remotely: NO Job Type: Full-Time Pay: Starting $25-38 per hour based on qualifications Benefits: • 401(k), • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time off, • Tuition reimbursement, • Paid Training, • Paid Holidays, • Company Truck Flexible Schedule: • Monday to Saturday, • On Call (Limited), • OvertimeSupplement Pay types:, • Bonus Pay, • Commission Pay Experience:, • HVAC Service: 3-5 Years, 5 years PreferredLicense/Certifications:, • EPA CertificationWork Location: On the Road Office Location: 1583 Livingston Ave, North Brunswick NJ 08902. Employer Provided Wages: This employer has provided their official estimate of the base salary they intend to pay for this job. Note that this is a range and an estimate, and this number is not guaranteed. An employer’s actual offer would depend on a candidate’s skills and level of experience. Employers may offer this job to a candidate at a salary outside of this range at their discretions.

This position is eligible to make commissions JOB DESCRIPTION: • Generate leads by cold-calling potential customers from lists generated by Sales and Marketing., • Qualify and pass leads for walk-in customers, Marketing campaigns, Caterpillar, and internal leads created by the parts and service team., • Collect and maintain customer information, including contact information, address, phone, and email addresses., • Maintain entire library of sales and technical product literature. Promptly provide all customers and potential customers with up-to-date product literature upon request., • Outbound calls to drive attendance at Marketing events., • Act as information contact point noted on Marketing campaigns., • Follow-up customer service calls after sales to gauge satisfaction with sales process. RECOMMENDED QUALIFICATIONS: • Bachelor's degree and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Communication, time management and organizational skills., • Self-starter and work with minimal supervision., • Excellent communication and interpersonal skills; both verbal and written., • Experience with Microsoft Office, Excel, Word and CRM systems. Effective communication and interpersonal skills; both verbal and written., • Bilingual, a plus Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

JOB DESCRIPTION: • Develop and execute onboarding strategies for digital platforms including parts ecommerce, equipment management, and other customer-facing tools., • Coordinate customer and employee training sessions, ensuring materials are clear, updated, and consistent across all business units., • Lead cross-functional digital engagement committees focused on improving customer experience, removing friction points, and increasing tool adoption., • Partner with Marketing to build value messaging, customer communications, and awareness campaigns that promote the digital tool suite., • Oversee the Onboarding Specialist and Parts Ecommerce Administrator, ensuring timely completion of onboarding tasks, troubleshooting, and customer support., • Work closely with Operations leadership to align digital initiatives, share adoption metrics, and improve internal understanding of tool workflows., • Identify trends in customer behavior and provide recommendations to improve activation, retention, and usage., • Maintain internal documentation, training resources, and system guides for all digital tools., • Serve as a liaison between Foley and Caterpillar digital teams, sharing insights and supporting ongoing program improvements., • Collaborate with stakeholders to track KPIs, maintain dashboards, and recommend strategies to drive performance improvements., • Support departmental goals by contributing to continuous improvement, participating in meetings, and sharing feedback across departments. RECOMMENDED QUALIFICATIONS: • High School or equivalent required; Bachelor's degree preferred., • Minimum 3-5 years of experience in digital operations, customer success, training, or related fields., • Experience in customer onboarding or SaaS adoption preferred., • Strong verbal and written communication skills., • Ability to manage projects from planning through execution., • Experience with Microsoft Office, Word, Excel, Adobe Reader and other related software. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job DescriptionCircadia Health built the world’s first FDA‑cleared, contactless remote‑patient‑monitoring system powered by AI. Our platform detects early signs of medical events such as CHF, COPD exacerbations, pneumonia, sepsis, UTIs, and falls—currently protecting 40,000+ patients every day. Our mission is to enhance patient outcomes and improve healthcare processes by providing cutting-edge solutions to healthcare providers and patients alike. As we scale, we’re hiring mission‑driven clinicians who want to pair hands‑on care with data‑driven insight. Position Description:Circadia Health is launching a new, proactive model of care aimed at improving outcomes through early intervention and consistent monitoring in skilled nursing facilities (SNFs). As part of this Proactive Care Program, we are seeking a dedicated Nurse Practitioner (NP) to lead on-the-ground efforts across two partner SNFs in New Jersey, located 13 miles apart. The NP will play a critical role working with the entire facility’s patient population (short and long term). This includes identifying and managing patients at risk — including new admissions, patients with out-of-range vitals (e.g., blood pressure, blood sugar, weight), those flagged by facility staff, Circadia’s AI Predictive Model, and/or patients with behavioral health needs. You will play a crucial role in our mission to enhance patient care through innovative solutions. You will be responsible for performing in-person patient assessments, prescribing necessary medication and treatments, developing individualized care plans and collaborating with the interdisciplinary team to ensure the highest standards of care.Key Responsibilities • Proactive In-Facility Rounding: Conduct initial and routine assessments on patients, prioritizing those flagged by Circadia’s AI powered monitoring system or facility staff. Prescribe all necessary medications and treatments under the covering physician agreement., • Data - Driven Patient Identification: Review alerts and trend analyses generated by Circadia’s platform to identify early signs of clinical deterioration. Verify and act on facility-initiated notifications within agreed response times., • Personalized Care Planning: Develop and update patient-specific care plans that integrate AI insights, evidence-based guidelines and resident goals. Set and monitor threshold-based interventions (e.g. BP, glucose, weight parameters)., • Interdisciplinary Collaboration & Education: Coordinate with facility clinical teams to ensure seamless hand-offs and follow-through on escalations and interventions. Communicate with physicians and/or specialists regarding patient care. Provide education to facility staff on Circadia’s platform and AI insights., • Continuous Quality Improvement: Track key performance indicators (e.g. hospital transfers, response times, guideline adherence) and participate in regular QAPI meetings to drive outcome improvement.KPIs, • Minimum 20 patient visits per facility per day, • Documentation completed within 24 hours for all patient assessments, follow ups, and any communications, • Review all Circadia flags and reports the same day while rounding in facilities, • Ensure individual care plans are up to date for any changes in condition, new risk or goals, • Partner with floor staff and nurses to ensure clinical follow-through on any interventions, • Attend and participate at the facilities QAPI meetings, • Provide brief in-services or huddles, as needed, • Track and review patient outcomes, • Comfortable navigating Circadia alerts, EMR, and documentation toolsQualifications, • Certified and licensed as a Nurse Practitioner in NJ, • Must have an active license and DEA # Medicare participation and ability to have company bill for services on your behalf, • Certification from ANCC (or equivalent) as an Adult, Family, Geriatric and/or Acute Nurse Practitioner, • 2+ years of Nurse Practitioner Experience working with complex adult populations, • Current NJ Driver’s License, • Comfort using technology such as Google Suite, multiple EMRs, Slack, AI transcription tools, • Ability to thrive in a fast-paced environment, • Comfortable in an adaptive and evolving environment, • English required, Spanish preferredBenefits, • Medical, dental, and vision coverage through Anthem BCBS (or equivalent), • 401(k) with employee contribution option, • Flexible PTO in accordance with company policy

Job Description We are a rapidly growing company who is looking for individuals that can handle high production volume, are you very computer savvy and can meet and exceed a daily quota of scanning items to our program. Work independently, self-motivated, work on your with little direction helping with one component of all the working parts of on-line sales. • Preferred experience working with all aspects of selling online: listing, updating & maintaining product listings as well as servicing customers, • Must be able to meet high quality and production output demands while working relatively unsupervised, • Must be very detailed oriented and able to do daily repetitive tasks, • Must have strong and accurate data entry skills, • Must have good grammar and spelling, • Must have strong communication skills and be able to answer phone calls to support customers, • Strong Computer Skills, • Research items to ascertain sale value, model number and any other relevant information, • Must be proficient using computers and more specifically the internet, • Previous online marketplace experience is preferred, • Use listing software to maintain expected production levels and profitability, • Must have a good grasp on the English language to create professional Marketplace Listings, • Must be able to describe a item(s) condition both cosmetically and functionally, • Able to pay close attention to detail and be organized, • Help control inventory flow by being organized and accurate in all tasks, • Answer customer emails/questions in a professional, courteous and respectful timely manner, • Communicate effectively with team members/supervisors to accomplish assigned tasks, • Shipping software experience preferred, • HS Diploma, GED or equivalent required, • Some College preferred Company DescriptionWe are an E-commerce Seller, we sell throughout the multiple market places such as Amazon and WalmartWe are an E-commerce Seller, we sell throughout the multiple market places such as Amazon and Walmart

Job Description We're hiring for entry-level auto roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have a number of positions to choose from: • Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing, • Lot Attendant: move vehicles from one department to the next in our Inspection Centers, • Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners, • Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Pay Range: $17-$18 hourly Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started - join the Carvana team by applying on this page! We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description1st Shift Pharmaceutical Coating Operator Role Overview: Responsible for the application of film or functional coatings to tablets, ensuring uniform quality and appearance while maintaining a sterile environment. Key Responsibilities:· Process Management: Operate coating equipment for commercial and validation batches, ensuring the correct application of coating suspensions.· Cleaning & Setup: Clean coating pans, spray guns, and surrounding process areas as per SOPs to prevent cross-contamination.· Data Integrity: Write and maintain Batch Manufacturing Records and logbooks; monitor environmental conditions within the coating suite.· Calibration: Verify weighing balances daily and document findings in calibration logs.· Change Parts: Manage the inventory and retrieval of change parts, ensuring all components are inspected for integrity before use.· General Support: Participate in equipment qualification and adhere to all facility gowning and safety regulations. Qualifications:· Education: Preferably a Science background.· Experience: 3–5 years of pharmaceutical manufacturing experience is essential. #ZIPNE

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay $20.00 to $23.00 per hour. 2nd Shift: 3pm-11:30pm Monday-Friday DUTIES AND RESPONSIBILITIES Under limited supervision, the Extruder Operator will be expected to operate extrusion machines in a work cell to produce required parts in accordance with customer requirements and the production schedule. Clearly understands and has demonstrated strong capability in setting up, starting, running, and tearing down any profile tooling in a safe and productive manner. Troubleshoot extrusion issues within a work cell. • Operates extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Analyze production data and make necessary adjustments to machine operations within the work cell., • Complete necessary documentation; process checks, quality checks, production reporting, etc., • Evaluate part conformance against documented engineering requirements., • Set up and start up any profile for any machine model in a work cell, • Troubleshot advanced problems against a defined process and escalates problems to appropriate support roles: ie, Technicians and Engineering, • Train new Extruder Operators, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Work safely and follow safety and process policies., • Make sure co-workers are working safely and following safety policies, • Participate in & lead kaizen events and sustain improvements made from those events, • Lead work cell when needed, • Perform basic maintenance tasks as necessary, • Attend and participate in appropriate training and development programs., • Perform other duties across the plant as needed, directed by supervision or managementQualifications, • High School Diploma or equivalent preferred, • Basic computer skills – Windows & keyboarding, • Equipment operation experience, • Be able to lift at least 50 pounds, • Developing leadership skills, • Master all skills and knowledge while working as an Extruder Operator, • Developing strong process and equipment troubleshooting capabilities, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base pay starts at $20 per hour 1st Shift: 7AM-3:30PM Monday-Friday DUTIES AND RESPONSIBILITIES Under limited supervision, the Extruder Operator will be expected to tend to and operate extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule. Clearly understands and has demonstrated strong capability with set-ups, start-ups, running and tearing down any profile tooling in a safe and productive manner. Troubleshoot extrusion issues within a work cell. • Tend to and operate extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Analyze production data and make necessary adjustments to operation of machines within the work cell, • Move materials in and out of the line as needed; including packaging materials, raw materials, and finished product, • Complete necessary documentation; process checks, quality checks, production reporting, etc., • Create labels and wrap loads per standard work. Fill in for lead in signing off loads, • Evaluate part conformance against documented product requirements and stack profiles on load, • Set-up and start-up any profile for all machines in a work cell, • Trouble-shoot advanced problems against a defined process and refer complex problems to appropriate support functions; ie – Technicians and Engineering, • Train new Extruder Operators, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Work in a safe manner and follow safety policies. Make sure co-workers are working safely and following safety policies, • Participate in & lead kaizen events and sustain improvements made from those events, • Lead work cell when needed, • Perform maintenance tasks as necessary, • Attend and participate in appropriate training and development programs., • Perform other duties across the plant as needed as directed by supervision or managementQualifications, • High School Diploma or equivalent preferred, • Basic computer skills – keyboarding, Windows, • Master all skills and knowledge while working as an Extruder Operator, • Developing strong process and equipment troubleshooting capabilities, • Equipment maintenance experience, • Developing leadership skills, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This is a hands‑on production role focused on supporting manufacturing operations through consistent execution of assigned tasks. The Operator works under direct supervision and is trained on specific equipment or processes such as CNC machining support, tacking, lamination, engraving, or card finishing. The ideal candidate is dependable, detail‑oriented, and eager to learn multiple functions to support daily production needs. Key Responsibilities: • Operate assigned production equipment or workstations following established procedures and work instructions., • Perform basic production tasks such as loading materials, monitoring equipment operation, and completing finishing steps., • Conduct visual inspections of parts to ensure quality standards are met and escalate defects or issues to the Supervisor., • Accurately complete required production and quality documentation using ERP tools or manual logs., • Follow all safety guidelines, policies, and standard operating procedures to maintain a safe and organized work environment., • Support flexibility by rotating between tasks or workstations as trained and assigned., • Communicate equipment issues, material shortages, or process concerns promptly to the Supervisor., • Participate in on‑the‑job training to build skills across manufacturing processes and equipment. Qualifications: • High School Diploma or GED required., • 1+ year of experience in a manufacturing, production, or industrial environment preferred., • Basic mechanical aptitude and willingness to learn manufacturing equipment and processes., • Ability to follow detailed instructions, standard work, and safety procedures., • Strong attention to detail and commitment to quality., • Reliable attendance and ability to work in a fast‑paced production environment., • Exposure to CNC machining, lamination, engraving, tacking, or finishing operations., • Familiarity with lean manufacturing concepts or continuous improvement practices., • Experience working in a regulated or quality‑driven manufacturing environment., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OEM division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OEM Division is searching for an experienced Electrical Hardware Design Engineer for our North American operation located in Piscataway, New Jersey. The ideal candidate will possess a strong electronics design and development background and will provide technical contributions to an engineering team focusing on the design and development of CCD / CMOS high-speed imaging systems. If you are a self-motivated individual with passion for your work that has garnered success in leading and contributing to team oriented product development efforts, please keep reading and visit our corporate website to learn more. Qualifications: • Advanced degree preferred in Electrical Engineering or Computer Engineering with 5 yrs of directly related experience., • Minimum of a BSEE degree with 6 to 10 yrs of directly related experience., • Will accept 12+ yrs of equivalent engineering design experience associated with designing instrumentation products, analytical instruments and/or related embedded control systems. Responsibilities: • Project contributor to the development and test of Light Detecting Systems involving CCDs, PDAs, InGaAs and CMOS sensors., • Involvement in all phases of product development: definition, design, qualification and production support., • Design of mixed signal circuits incorporating Op-Amps, Voltage References, DACs, ADCs and discrete semiconductors., • Design of FPGA based high speed digital circuitry incorporating LVDS and MIPI interfaces for sensor command & control., • Participation in the PCB board layout/routing definition stages for new board / product designs., • Contributions to board level test fixture designs Requirements: • Solid understanding of electrical engineering principles in both analog and digital domains., • Design knowledge of low noise / wide bandwidth analog and mixed signal circuits., • Experience with data acquisition systems incorporating the following interfaces: USB 2/3, Gig-E, LVDS, MIPI, SPI and I2C., • Knowledge of system level power distribution design and power management techniques., • Ability to guide multi-layer PCB board designs within stack-up, parts placement and routing requirements., • Familiarity with test equipment: Scopes, DVMs, Power Supplies, Function Generators and Logic / Spectrum Analyzers., • Sound test, troubleshooting and SMT soldering skills., • Production support experience., • Strong problem solving, communication and interpersonal skills. Preferred Attributes (one or more viewed as a plus): • Knowledge of CCD and CMOS imager architectures a plus., • FPGA Design; Verilog and/or VHDL, Altera and/or Xilinx tools., • Experience with Mentor Graphics for schematic capture and PCB layout/routing., • Design experience with Renesas and Cypress processors., • Product design experience in meeting CE & LVD Safety directives., • Project leadership. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Veteran Status/Disabilities.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are pd of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Director of Parts Logistics and Operations, Customer Support (the "Director") is a high-visibility, high-impact leadership role. The Director is responsible for overseeing and optimizing the parts logistics operations to ensure the efficient procurement, storage, distribution, and management of parts and components within the organization. This role involves coordinating with suppliers, managing inventory, and leading a team to ensure the timely availability of parts while maintaining cost-effectiveness and high-quality standards. Reporting to the Vice President and General Manager of the Customer Support division for North America, the Director works in a globally matrixed organization overseeing critical regional functions/deliverables across our business segments. The Director also leads Spare Parts Specialists who own the customer relationship from a spare parts perspective and proactively engage customers to increase spare parts sales. The role reports to the Vice President and General Manager of Customer Support. Key Responsibilities: • Develop and implement logistics strategies for the procurement, storage, and distribution of parts and components., • Oversee the coordination of suppliers and vendors to ensure timely delivery of parts and adherence to quality standards., • Oversee the transportation and distribution of parts to various locations, including warehouses and end-users., • Manage inventory levels to ensure optimal stock levels are maintained, reducing both excess inventory and stockouts., • Implement inventory control procedures and best practices to minimize loss and maximize accuracy., • Conduct regular inventory audits and reconciliation., • Oversee warehouse operations as part of overall logistics and operational responsibilities., • Lead and mentor a team of logistics and warehouse staff, providing training and support to ensure efficient and effective operations., • Develop and implement performance metrics and goals for team members, conducting regular performance reviews., • Identify and implement process improvements to enhance efficiency, reduce costs, and improve service levels., • Utilize data analysis to monitor logistics performance, identify trends, and make data-driven decisions., • Ensure compliance with safety regulations and company policies., • Establish and maintain strong relationships with suppliers and vendors to negotiate favorable terms and resolve issues., • Monitor supplier performance/quality, addressing any issues related to delivery, quality, or cost., • Develop and manage the budget for parts logistics operations, including forecasting and controlling expenses., • Analyze financial reports and metrics to ensure budget adherence and cost-effectiveness., • Ensure timely and accurate fulfilment of parts orders to meet customer requirements and expectations., • Address and resolve any issues related to parts delivery, quality, or discrepancies., • Ensure compliance with all relevant regulations and industry standards, including safety, environmental, and quality regulations., • Prepare and present regular reports on logistics performance, inventory levels, and other key metrics to senior management., • Customer-facing spare parts ownership and sales growth, • Lead and manage Spare Parts Specialists who own customer relationships for spare parts and drive proactive engagement to increase spare parts sales., • Establish a customer coverage model and engagement cadence for Spare Parts Specialists (account plans, installed-base reviews, critical spares recommendations, and obsolescence risk mitigation)., • Set targets and performance expectations for Spare Parts Specialists (sales goals, activity metrics, pipeline discipline). Inspect performance routinely and coach to outcomes. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications • 10–15+ years in supply chain, logistics, operations, or aftermarket support, • 5–7+ years in senior leadership managing global or multi-site operations, • End-to-end spare parts lifecycle management (forecasting, procurement, warehousing, distribution), • Commitment to customer satisfaction, • Optimization of fill rate, inventory turns, service levels, and obsolescenc, • Reverse logistics, repairs, refurbishment, and warranty returns, • New product introduction (NPI) readiness for service and spares, • Proven experience with spare parts planning & distribution, aftermarket / customer support operations, service-level agreement (SLA) management., • Ability to lead and develop current team, • Experience with budget ownership, • Strong decision-making under pressure, • Customer-centric mindset with operational rigor, • Ability to balance cost, speed, and service quality, • Commercial leadership for spares, • Experience leading customer-facing teams with accountability for spare parts sales growth., • Ability to build and execute proactive spare parts growth plans across a defined customer base. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Industrial Mechanic Location: Dayton, NJ Shift Hours: 6:00 AM to 4:30 PM, Monday through Thursday Pay Range: $25 to $35 per hour Make the Right Connection-Build Your Career with Dixon! Richmond Foundry is looking for an Industrial Mechanic to be the backbone of our high-tech foundry in Dayton, NJ! This dual-threat role is critical for minimizing downtime and maximizing production. You will be responsible for the rapid diagnosis and repair of complex electrical systems (PLCs, VFDs, motors) and mechanical equipment (hydraulics, gearboxes, conveyors). Your proactive maintenance expertise is essential. We need a safety-minded professional committed to LOTO and operational excellence. If you thrive on technical challenge and want your skills to directly power success, apply now! About Us: Richmond Foundry, LLC, an affiliate of The Dixon Group is a leading producer of high-quality metal castings. We are committed to safety, excellence, and innovation. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: \n • Install, troubleshoot, repair, and maintain electrical systems, motors, and control panels\n, • Perform mechanical repairs on plant equipment, conveyors, and machinery\n, • Conduct routine inspections and preventative maintenance\n, • Read and interpret electrical and mechanical diagrams and schematics\n, • Ensure compliance with safety regulations and company policies\n, • High school diploma required\n, • Technical training or additional education preferred\n, • Electrical troubleshooting and repair experience is a must.\n, • Proven experience as an industrial electrician and mechanic, ideally in a foundry or manufacturing environment\n, • Strong knowledge of electrical codes, and mechanical systems\n, • Extensive understanding of three-phase electrical systems and control theory\n, • Ability to read blueprints, schematics, and technical manual\n, • Troubleshooting and problem-solving skills\n, • Ability to work independently and as part of a team\n, • Certification or licensing as an electrician is preferred\n, • Forklift Certification is preferred\n, • Ability to lift heavy equipment and parts\n, • Standing, bending, and climbing for extended periods\n, • Medical, dental, and vision insurance for you and your family\n, • Competitive salary\n, • Bonus programs\n, • 401K retirement plan\n, • Training opportunities\n, • Tuition reimbursement\n, • Paid vacation, PTO, and holidays\n The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Challenge Yourself and Impact the Future! MacDermid Alpha Electronics Solutions, a business segment of Element Solutions Inc (NYSE: ESI), is renowned worldwide for its commitment to revolutionizing the electronics industry. With a legacy spanning over a century, we have continually set new benchmarks for excellence, reliability and sustainability in electronic materials. • \nWafer Level Packaging - Revolutionizing wafer fabrication processes for enhanced efficiency and performance, • \nCircuitry Solutions - Tailored solutions to meet the dynamic demands of modern circuitry, • \nElectronics Assembly Solutions - Innovating semiconductor, surface mount technology, and power electronics assembly for unparalleled reliability, • \nAdvanced Materials and Joining - Engineering polymer and metal joining solutions for optimally performing circuits, • \nFilm & Smart Surface Solutions - Transforming electronics with cutting-edge materials and technologies for enhanced functionality and reliability, • \nMicromax - Elevating electronics through high-performing, specialized inks and pastes Across diverse sectors including automotive, consumer electronics, mobile devices, telecom, data storage, infrastructure, and AI, MacDermid Alpha Electronics Solutions has earned the trust of manufacturers worldwide. Our comprehensive range of high-quality solutions and technical services enables the entire electronics supply chain, empowering businesses to thrive in today's competitive landscape. We embody the 'Elements of our Culture'- our 5C's; Challenge, Commit, Collaborate, Choose, and Care. These core values are the foundation of our organization which our employees embrace in their interactions with customers, colleagues and other stakeholders, to drive financial performance and create a rewarding work environment. Who are we looking for? We are seeking a skilled and detail-oriented Tool & Die Machinist who can analyze technical specifications and perform bench and machine operations to construct, modify, and repair tools and dies. The ideal candidate will have a solid understanding of tooling practices and applications and demonstrate strong craftsmanship and problem-solving abilities. They must be proficient in using precision measuring instruments to ensure accuracy, quality, and consistency in all work performed. What will you be doing? • Assist GPEG Engineers in the design and development of equipment and processes for manufacture of preforms., • Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers., • Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders., • Measure, examine, and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers., • Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations., • Lay out, measure, and mark metal stock in order to display placement of cuts., • Observe and listen to operating machines or equipment in order to diagnose machine malfunctions and to determine need for adjustments or repairs., • Check work pieces to ensure that they are properly lubricated and cooled., • Maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedure, • Dismantle machines or equipment, using hand tools and power tools, in order to examine parts for defects and replace defective parts where needed., • Establish work procedures for fabricating new structural products, using a variety of metalworking machines., • Fit and assemble parts to make or repair machine tools., • Design fixtures, tooling, and experimental parts to meet special engineering needs., • Test experimental models under simulated operating conditions for such purposes as development, standardization, and feasibility of design.\nWho are You?, • You hold a high school diploma or equivalent., • You are an experienced machinist/toolmaker or have completed a recognized apprenticeship program or technical certification., • You bring at least five years of related experience, or an equivalent combination of education, training, and hands-on experience., • You are committed to workplace safety and follow established procedures in manufacturing environments., • You take pride in producing accurate, high-quality work and meeting production goals.\nWhat competencies will you need?, • Strong attention to detail with a focus on quality and efficiency., • Skilled at troubleshooting dies, equipment, and production issues., • Able to operate all tool room equipment; Wire EDM, CNC mills, and grinders a plus., • Comfortable in a fast-paced, multitasking environment., • Follow SOPs, safety instructions, and OSHA standards., • Collect and maintain production and QC data accurately., • Effective communicator and team player., • Occasional travel (, • Physically able to perform job tasks, including lifting and standing for extended periods.\nWe are Offering... Challenge Yourself and Impact the Future - We are committed to solving the complete and evolving needs of our customers through innovation and high-quality standards. We are focused on brining cutting edge and environmentally sustainable solutions to the market. Our people are the critical resource required to make that happen. We support your success by creating a strong, inclusive culture, competitive total rewards and an appropriate work-life balance. As part of the MAES Team, you will have ... • Opportunities for career growth, competitive compensation (competitive base salary and performance related bonus plan) and benefits packages (health, dental, and vision insurance, Wellness Program, PTO/Holidays, as well as a 401(k)-retirement plan with a company match)., • The typical base salary range for this position is between $60,217.00 - $90,325.00 annually., • Innovated work environment where you will be a part of a dynamic and collaborative team., • Perks and Incentives such as paid parental leave, tuition reimbursement, and opportunities for professional development. \nEqual Opportunity Employer All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category applicable under federal, state and local laws.

Hunt - - Responsibilities: Actively manage parts sales by forecasting inventory turnover and replenishment; Monitor inventory levels and order parts as required to ensure adequate supply; Retain/ship parts and maintain JBHT information systems of parts and fuel; Conduct cycle counts and periodic in

HW Staffing Solutions - - Responsibilities: Perform mechanical assembly of traffic-related equipment; Assemble components, sub-assemblies, and hardware parts; Follow assembly instructions, blueprints, and work orders; Use hand and power tools safely and efficiently; Operate a forklift as required.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay: $26.00 to $28 per hour plus $ 1 shift differential 3rd Shift: 11pm-7:30am Monday-Friday DUTIES AND RESPONSIBILITIES We are looking for an experienced, hands-on Extrusion Production Team Lead to manage daily production operations, ensure product quality, support team members, and maintain‑ a safe and efficient manufacturing environment. If you thrive in a fast-paced industrial setting and enjoy leading people, this role is for you. Responsibilities • Perform Gemba walk to assess safety, 5S, equipment readiness, labor needs, and line status., • Communicate with outgoing leadership regarding any issues or updates., • Review email for important information for the shift kickoff meeting., • Lead the daily T1 meeting using the WIT Board (Safety, Quality, Operations, Cost, Teamwork, Opportunities)., • Complete quality and process audits: stat-trackers, weight-per-foot checks, and QC measurements using calipers and gauges., • Monitor Andon lights and respond quickly to quality or operational issues., • Approve first-piece parts following standard work guidelines., • Manage operator and technician break/lunch schedules., • Meet with team members to review NCR (non-conforming product) rejections., • Assist in troubleshooting equipment and process issues, coach and train employees., • Print production labels as needed., • Review and adjust production schedule based on changing needs., • Address employee concerns and provide day-to-day support., • Participate in continuous improvement using QPS, 5 Why analysis, and PDCA methodology., • Ensure all employees follow safety rules and company policies., • Conduct full shift handoff with incoming leadership and maintain floor coverage until shift change., • Transfer T1 meeting data to charts, logs, and audit records., • Complete all required shift paperwork and submit it on time.Qualifications, • Experience in extrusion or manufacturing environment is preferred., • 2 - 3 years of leadership experience is a plus., • Ability to use measuring tools (calipers, gauges, etc.)., • Strong communication and coaching skills for a diverse work team, • Problem-solving through critical thinking ability using structured improvement tools (5 Why, PDCA)., • Strong commitment to workplace safety and product quality. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionNow Hiring: High-Level Automotive Technicians Up to $5,000 Sign-On Bonus • No Weekends • Flat Rate with Guaranteed Hours Tired of being just another wrench in the shop? At RSW Auto Group, we don’t just offer a job—we offer a career path with purpose, growth, and real rewards. If you're an experienced tech who takes pride in your work, it's time to step into a shop that backs you with the pay, tools, and respect you’ve earned. Why Top Techs Choose RSW: * Up to $5,000 Sign-On Bonus * Flat-Rate Pay with a Guaranteed Minimum Above Industry Standard * Monday–Friday Only (8 AM to 5 PM) – Your weekends stay yours * Company-Paid Technician Training & Mentorship Program * 401(k) with Company Match * Paid Holidays and PTO * Medical, Dental, Vision, HSA/FSA with Company Contribution * Short & Long-Term Disability, Life, and Supplemental Coverage * State-of-the-Art Diagnostics and Software * Free Uniforms, Branded Gear, and Laundry Service * Service and Parts Discounts * Team and Individual Bonus Plans What We’re Looking For: * 3+ years of hands-on experience in automotive repair * Strong diagnostic and electrical skills—European vehicle experience is a plus * Solid communication and collaboration skills * A commitment to quality, integrity, and continuous improvement * Valid driver’s license and clean driving record Your Role: * Accurately diagnose and repair a wide range of vehicles * Collaborate with advisors and fellow techs to ensure seamless workflow * Maintain a clean, efficient, and safety-first workspace * Stay current with industry tools and trends * Be a leader on the floor—not just a wrench turner This Is More Than a Job. It’s a Career. At RSW, we’re building something different—a high-performance team culture rooted in trust, craftsmanship, and continuous development. We're not looking for someone to fill a bay. We’re looking for a technician who wants to build something with us. Ready to talk? Visit or apply directly through this post. Let’s see if we’re the right fit for each other.

Job Description Job Summary: We are seeking a skilled and reliable Automotive Technician / Mechanic to diagnose, repair, and maintain a variety of vehicles. The ideal candidate is passionate about automotive technology, has strong problem-solving skills. This role involves hands-on work with cars and trucks, ensuring high standards of safety and efficiency. Key Responsibilities: Perform routine maintenance services such as oil changes, tire rotations, brake inspections, and fluid checks. Diagnose mechanical and electrical issues using diagnostic tools and equipment. -Repair or replace faulty parts, including engines, transmissions, suspensions, and exhaust systems. -Conduct vehicle inspections and provide accurate estimates for repairs. -Test drive vehicles to verify repairs and ensure quality control. Maintain a clean and organized workspace, adhering to safety protocols and shop standards. Communicate effectively with team members about repair needs and progress. Stay updated on the latest automotive technologies and industry best practices through training. Qualifications and Requirements: • Proven experience as an Automotive Technician or Mechanic (2+ years preferred)., • ASE certification or equivalent (e.g., in brakes, suspension, electrical systems) is a plus., • Strong knowledge of automotive systems, tools, and diagnostic equipment., • Ability to read and interpret technical manuals and schematics., • Excellent troubleshooting and mechanical skills., • Valid driver's license with a clean driving record., • Physical ability to lift heavy objects (up to 50 lbs) and work in various positions., • High school diploma or GED; technical school training is advantageous., • Automatic & Standard Transmission experience is a plus.

Job Description We're looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-Level Technician, you'll be expected to perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Starting Pay: $18 - $20 Per Hour Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Job Title: Tool Crib & Maintenance Shop Supervisor Location: New Brunswick, NJ Compensation: $75,000–$80,000 annually Schedule: On-site, full-time Position Overview We are seeking a hands-on Tool Crib and Maintenance Shop Supervisor to oversee daily operations of the maintenance tool crib and shop floor. This role is responsible for tool control, parts inventory, maintenance support, and coordination with maintenance technicians to ensure equipment uptime, safety, and operational efficiency in a fast-paced manufacturing environment. This is not a clipboard-only role. You will be in the shop, in the details, and accountable for keeping maintenance teams properly equipped and moving. Key Responsibilities • Oversee day-to-day operations of the tool crib and maintenance shop, • Manage inventory of tools, spare parts, and maintenance supplies, • Issue, track, and maintain tools and equipment to ensure accountability and availability, • Coordinate with maintenance technicians and supervisors to support preventive and corrective maintenance activities, • Maintain accurate inventory records and reorder points to prevent downtime, • Ensure proper storage, calibration, and condition of tools and equipment, • Support CMMS usage including parts tracking, work order support, and documentation, • Enforce safety standards, housekeeping, and 5S practices within the shop and tool crib, • Train and guide maintenance staff on tool crib procedures and best practices, • Partner with operations, safety, and leadership to support production goals Qualifications • Prior experience supervising a tool crib, maintenance shop, or similar operation in a manufacturing or industrial environment, • Strong working knowledge of mechanical, electrical, and maintenance tools and parts, • Inventory management experience, including cycle counts and reorder processes, • Comfortable working closely with maintenance technicians and leadership, • Experience with CMMS systems preferred, • Strong organizational skills with attention to detail, • Ability to lead by example in a hands-on, fast-paced environment, • Bilingual English/Spanish is a plus What’s Offered • Competitive salary in the $75k–$80k range, • Comprehensive benefits package including medical, dental, vision, life insurance, disability coverage, 401(k), FSA, and paid time off, • Opportunities for growth and development within a stable, expanding manufacturing environment, • Collaborative, operationally focused culture where execution matters

Job Description JOB SUMMARY: The Tool Crib Supervisor is responsible for overseeing the daily operations of the tool crib and stockroom functions that support maintenance, repair, operations, and production. This role ensures proper inventory control, tool availability, and efficient distribution of materials required for plant operations. The supervisor manages tool crib staff, maintains accurate inventory records, coordinates purchasing activities, and ensures compliance with company safety, quality, and operational standards while supporting continuous improvement initiatives. ESSENTIAL RESPONSIBILITIES & ACCOUNTABILITIES: • Supervise the daily operations of the tool crib and stockroom areas, including oversight of staff across multiple shifts, • Maintain accurate inventory levels of tools, spare parts, and production supplies, ensuring availability to support maintenance and production operations, • Monitor inventory transactions including receiving, issuing, stocking, and tracking tools and materials in the inventory management system, • Coordinate the ordering of replacement parts, new tools, and supplies while supporting purchasing activities and vendor communication, • Ensure all materials received or issued are processed accurately and in a timely manner, • Implement and maintain organized storage systems in accordance with LEAN, 5S, and continuous improvement practices, • Track, monitor, and report key performance indicators (KPIs) related to inventory accuracy, tool utilization, and stockroom performance, • Develop and maintain tool crib procedures, policies, and documentation to support operational efficiency and internal customer needs, • Conduct regular cycle counts and inventory audits to ensure system accuracy and accountability, • Prepare employee schedules, assign work tasks, and coordinate staffing to minimize overtime and prevent production downtime, • Train, mentor, and evaluate Tool Crib Attendants, including conducting performance reviews and supporting employee development, • Collaborate with maintenance, engineering, and production teams to ensure timely availability of tools and materials, • Maintain proper records for tool tracking, calibration (if applicable), and repair or replacement schedules, • Ensure compliance with company policies, safety regulations, and quality standards while promoting a strong safety culture, • Participate in departmental, production, and safety meetings as required, • Communicate operational issues, inventory concerns, or process improvements to management in a timely manner, • Support continuous improvement initiatives and participate in special projects as assigned, • High school diploma or equivalent required, • Minimum 3–5 years of experience in tool crib operations, stockroom management, inventory control, or maintenance support within a manufacturing environment, • Prior supervisory or team leadership experience preferred, • Strong knowledge of inventory control processes and stockroom operations, • Understanding of manufacturing maintenance tools, spare parts, and equipment, • Familiarity with LEAN manufacturing, 5S, and continuous improvement practices, • Strong organizational and problem-solving skills, • Ability to prioritize tasks and manage multiple responsibilities in a fast-paced environment, • Strong communication and leadership skills, • Proficiency in Microsoft Office and inventory management software, • Ability to work collaboratively with maintenance, production, and purchasing teams #EuroUrgent #EuroHigh