Parts jobs in Kingston, New YorkCreate job alerts

Overview: This position is for the Overnight Shift 2am - 1030am Monday to Friday Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets. This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Complex Repairs • Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:, • Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems)., • CAN-bus and multiplex electrical systems, electronic control modules, and communication networks., • Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs., • Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds. Technical Leadership & Training • Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks., • Assist in training on:, • Diagnostic software and tools., • New equipment technology, safety systems, and telematics., • Company maintenance standards, PM strategies, and repair procedures. Fleet Reliability, Compliance & Continuous Improvement • Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications., • Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT., • Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC). Operational & Customer Support • Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area., • Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets., • Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety. Administrative & Leadership Duties (as assigned) • Help plan daily shop workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop. Requirements and Qualifications::, • High school diploma or GED required; additional technical training strongly preferred., • A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul., • CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads., • Demonstrated expert-level knowledge of:, • Heavy truck and refuse systems., • Refuse hydraulic, electrical, and powertrain systems., • Diagnostic software, scan tools, and OEM service information., • Proven track record of performing complex diagnostics and repairs independently., • Must provide own professional-grade tools required for diagnostic and repair work., • ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred., • Possession of a valid driver’s license is required., • Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred., • Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred., • Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $31.47/Hr. Salary Range Maximum: USD $31.47/Hr.

Job Description Local CDL Class B Drivers $1400 a week!! Monday- Friday WEEKENDS OFF!!! Home Daily!! Here's the Job Details for Local Class B Truck Drivers • Hauling auto parts to retail stores, • Night deliveries, • Home Daily, • Newer model equipment/well maintained Benefits + Perks for Local CDL Class B Truck Drivers • Medical, Dental and Vision Insurance, • 401k with matching company contribution, • Paid Time Off - Vacation, Sick, • Paid Holiday Time, • Employee Assistance Plan (EAP), • Quarterly + Annual Safety Bonuses, • Cell Phone Allowance, • Company branded clothing plus Red Wing boots, • Elite Driver Program Awards Requirements for Class B CDL Truck Drivers • Minimum 1 year of safe commercial driving experience, • Valid CDL B, • Experienced Drivers preferred pallet jack. Will train., • Must be able to pass DOT pre-employment drug screen and meet DOT medical requirements

Job Description Local CDL Class B Drivers $1400 a week!! Monday- Friday WEEKENDS OFF!!! Home Daily!! Here's the Job Details for Local Class B Truck Drivers • Hauling auto parts to retail stores, • Night deliveries, • Home Daily, • Newer model equipment/well maintained Benefits + Perks for Local CDL Class B Truck Drivers • Medical, Dental and Vision Insurance, • 401k with matching company contribution, • Paid Time Off - Vacation, Sick, • Paid Holiday Time, • Employee Assistance Plan (EAP), • Quarterly + Annual Safety Bonuses, • Cell Phone Allowance, • Company branded clothing plus Red Wing boots, • Elite Driver Program Awards Requirements for Class B CDL Truck Drivers • Minimum 1 year of safe commercial driving experience, • Valid CDL B, • Experienced Drivers preferred pallet jack. Will train., • Must be able to pass DOT pre-employment drug screen and meet DOT medical requirements

Job Description Local CDL Class B Drivers $1400 a week!! Monday- Friday WEEKENDS OFF!!! Home Daily!! Here's the Job Details for Local Class B Truck Drivers • Hauling auto parts to retail stores, • Night deliveries, • Home Daily, • Newer model equipment/well maintained Benefits + Perks for Local CDL Class B Truck Drivers • Medical, Dental and Vision Insurance, • 401k with matching company contribution, • Paid Time Off - Vacation, Sick, • Paid Holiday Time, • Employee Assistance Plan (EAP), • Quarterly + Annual Safety Bonuses, • Cell Phone Allowance, • Company branded clothing plus Red Wing boots, • Elite Driver Program Awards Requirements for Class B CDL Truck Drivers • Minimum 1 year of safe commercial driving experience, • Valid CDL B, • Experienced Drivers preferred pallet jack. Will train., • Must be able to pass DOT pre-employment drug screen and meet DOT medical requirements

Job Description Local CDL Class B Drivers $1400 a week!! Monday- Friday WEEKENDS OFF!!! Home Daily!! Here's the Job Details for Local Class B Truck Drivers • Hauling auto parts to retail stores, • Night deliveries, • Home Daily, • Newer model equipment/well maintained Benefits + Perks for Local CDL Class B Truck Drivers • Medical, Dental and Vision Insurance, • 401k with matching company contribution, • Paid Time Off - Vacation, Sick, • Paid Holiday Time, • Employee Assistance Plan (EAP), • Quarterly + Annual Safety Bonuses, • Cell Phone Allowance, • Company branded clothing plus Red Wing boots, • Elite Driver Program Awards Requirements for Class B CDL Truck Drivers • Minimum 1 year of safe commercial driving experience, • Valid CDL B, • Experienced Drivers preferred pallet jack. Will train., • Must be able to pass DOT pre-employment drug screen and meet DOT medical requirements

Job Description Summary: Drives an assigned company vehicle primarily to deliver store to store transfers. Essential Duties and Responsibilities to include but not limited to: • Familiar with computer terminal, • Familiar with store and yard merchandise/materials, • Completes proper paperwork, • Accurately pick orders, • Stages orders in a neat and orderly fashion, • Accurately picks orders, • Participates in 100% load check on all deliveries., • Verifies that items have been billed out correctly prior to leaving the store, • Properly loads and handles merchandise to avoid any damages, • Delivers product to assigned stores., • Completes tasks in a timely manner, • Requires little direction, • Assists with the ACE order, • Assists with merchandise stocking, • Follow all State and Federal Safety Laws of safe driving., • Unloads and verifies product to store location, • Safe and careful handling on all product and equipment thru the whole process., • Represents Williams Lumber in a professional and courteous manner while on the road and at store sites., • Reports any problems immediately to store manager. This includes damage, shortage, ect., • Follows proper procedures in reporting any vehicle accident or near miss. These must be immediately reported to supervisor., • Follows all safety procedures., • Help with unloading transfer deliveries., • Inspects truck equipment and supplies., • Reports any mechanical problems of the vehicle immediately to supervisor., • Readily complies with all DOT required testing and training regulations., • Displays teamwork and effort in performance of all duties., • Participates in all required training assignments., • Completes any daily vehicle maintenance logs as needed, • Other duties may be assigned. As with all other jobs, other duties may be assigned. Management reserves the right to reassign an individual in this position to another position in the interest of efficient personnel utilization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High School Diploma or General Equivalency Diploma; or six to twelve months’ related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other associates of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certifications, Licenses, Registrations Valid driver license required to be maintained throughout position assignment of Driver. Physical Demands The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The associate frequently is required to walk and climb or balance. The associate is occasionally required to stand and stoop, kneel, crouch, or crawl. The associate must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly exposed to fumes or airborne particles and vibration. The associate is frequently exposed to outside weather conditions. The associate is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually loud. Other Full time, part time or seasonal position, hours as assigned. Forklift training and demonstrated continuing forklift operation competency required.

Job DescriptionJSP Home Services - HVAC Installer At JSP Home Services, we know that long-term relationships aren’t built overnight, which is why the cornerstones of our business are quality and integrity. As recognized leaders for all things plumbing, heating and cooling, and electrical for the Hudson Valley, we've grown by providing a best-in-class workplace for our employees to grow within. Our focus on quality and expert service has led to explosive growth, so we are seeking experienced HVAC Installer to join our team. Are you looking for stability, growth and development opportunities, and a compensation package that rewards you for your hard work and success? Come join the JSP team and realize what it is like to be a part of a company that works for you! In exchange for your skillset and commitment, we offer:- Company vehicle, gas card, cell phone, and tablet- 401(k) with Company Match- High-quality, Affordable Medical, Dental, and Vision Insurance- Health Savings Account with company contributions- Company Paid Short-Term Disability Insurance, Life Insurance, and Long-Term Disability Insurance- Paid Holidays- Paid Time Off (PTO)- Parental Leave- Tuition reimbursement- Special deals/Discounts on a variety of services and entertainment- Tool account- Safety shoe reimbursement- Family & friends discounts on services- Yearly Performance Reviews As a Residential HVAC Installer at JSP Home Services, you will play a vital role in our mission to provide superior HVAC installations for our residential customers. Working in a crew of two, alongside an Install Apprentice, you will be responsible for safely and efficiently installing HVAC systems while upholding the highest standards of craftsmanship and customer service.Residential HVAC Installer Success Metrics: • Customer Satisfaction: Maintain customer satisfaction rate through post-service surveys and feedback. Strive to exceed customer expectations and resolve any concerns promptly., • Installation Quality: Maintain a consistently high level of installation quality, as evaluated through post-installation inspections and customer feedback., • Efficiency and Productivity: Complete HVAC installations within the established timeframes, meeting or exceeding the company's productivity standards., • First-Time Installation Success: Achieve a first-time installation success rate as established by the Installation Manager, ensuring minimal revisits or callbacks due to installation-related issues., • Technical Proficiency: Continuously update and enhance technical skills, staying informed about the latest installation techniques, manufacturer guidelines, and industry best practices., • Safety Adherence: Maintain a perfect safety record, strictly adhering to all safety protocols and guidelines. Ensure zero safety incidents or accidents within the performance period., • Mentorship and Guidance: Provide effective mentorship and guidance to the Install Apprentice, contributing to their skill development and ensuring a positive learning experience., • Professionalism, Appearance, and Customer Communication: Demonstrate excellent communication skills when interacting with customers during installations. Uphold a professional appearance and demeanor while representing JSP Home Services during installations, earning high marks for professionalism from customers., • Accuracy of Documentation: Maintain accurate and complete documentation of installation details, equipment used, and any modifications in the company's systems, such as Service Titan., • Team Collaboration: Work collaboratively with the Install Apprentice and other team members, fostering a positive and supportive work environment that promotes teamwork., • Continual Improvement: Actively participate in performance reviews and self-assessments, identifying areas for personal improvement and setting development goals to enhance overall job performance. Pursue additional certifications and training opportunities to expand expertise and proficiency in installing various brands of HVAC equipment., • Installer and Apprentice Development: Monitor and track the progress of the Install Apprentice, providing regular feedback and opportunities for growth and skill advancement., • Timeliness and Punctuality: Maintain a consistent record of punctuality and attendance, arriving at installation sites and appointments on time.

Job Description The Role Stage parts and equipment at company warehouse and deliver to job sites Responsibilities • Load and unload parts and equipment, • Drive a 16’ box truck and operate a lift gate and pallet jack, • Organize parts and equipment and securely tie-down for safe transportation, • Check and verify orders to confirm items, quantity, and condition, • Organizing and cleaning warehouse and trucks, • Receiving, restocking, and counting inventory, • Other tasks as assigned, • Provide responsive, clear, concise, and consistent communication with customers, • Must have a clean & insurable driving record, • Must be able to pass a background check & drug test, • Ability to lift and carry 80 lbs., • Must be able to work under deadlines, • Must have good reading and communication skills, • Must possess a positive attitude and professional appearance, • Ability to work with power tools, on ladders, in attics, and on roofs

Job DescriptionWarehouse Parts Runner John S. Parker (JSP) has been changing the way people think about their home comfort provider. Our philosophy of providing high levels of customer service combined with top quality products and services has made us a leading force in the home services business.JSP is committed to continue our growth by hiring and training employees committed to excellence and have a drive to provide best-in-class customer service. HVAC Parts Driver Job Summary - Essential ResponsibilitiesResponsible for the pickup and delivery of HVAC & Plumbing related items. May pickup, receive, verify, load and deliver equipment and materials needed for each job. Demonstrates and establishes effective working relationships with co-workers, superiors. Properly completes all paperwork required for each job. Maintains cleanliness of assigned company vehicle. Maintains high levels of customer service and satisfaction.General ResponsibilitiesPerforms all tasks and duties in an efficient and safe manner. Performs other related duties as assigned or as necessary. Remains flexible and adaptable in work schedules and work assignments as defined by departmental and organizational needs. Represents the company in a manner that conveys professionalism, confidentiality, courtesy, fairness, personal integrity, and respect for others. Physical requirements includes the ability to lift up to 75lbs, stand, bend, stoop, sit, reach, lift and travel to locations.Qualifications Education and/or ExperienceHigh School Diploma or equivalent.Ability to be flexible in work schedule (may include some weekends).HVAC school or work experience is a plus. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJSP Home Services - HVAC Service Technician At JSP Home Services, we know that long-term relationships aren’t built overnight, which is why the cornerstones of our business are quality and integrity. As recognized leaders for all things plumbing, heating and cooling, and electrical for the Hudson Valley, we've grown by providing a best-in-class workplace for our employees to grow within. Our focus on quality and expert service has led to explosive growth, so we are seeking experienced HVAC Service Technician to join our team. Are you looking for stability, growth and development opportunities, and a compensation package that rewards you for your hard work and success? Come join the JSP team and realize what it is like to be a part of a company that works for you! In exchange for your skillset and commitment, we offer:- Company vehicle, gas card, cell phone, and tablet- 401(k) with Company Match- High-quality, Affordable Medical, Dental, and Vision Insurance- Health Savings Account with company contributions- Company Paid Short-Term Disability Insurance, Life Insurance, and Long-Term Disability Insurance- Paid Holidays- Paid Time Off (PTO)- Parental Leave- Tuition reimbursement- Special deals/Discounts on a variety of services and entertainment- Tool account- Safety shoe reimbursement- Family & friends discounts on services- Yearly Performance Reviews As a Residential HVAC Service Technician at JSP Home Services, you will play a crucial role in maintaining and servicing HVAC systems for our residential clients. Your technical expertise, commitment to excellence, and customer-focused approach will contribute to our mission of providing unparalleled comfort and energy efficiency to our customers' homes.Key Performance Indicators (KPIs) for Residential HVAC Service Technician: • Customer Satisfaction: Provide clear explanations and educate customers about their HVAC systems, offering preventive maintenance tips and energy-saving recommendations. Maintain customer satisfaction rate through post-service surveys and feedback. Strive to exceed customer expectations and resolve any concerns promptly., • First-Time Fix Rate: Achieve a best-in-class first-time fix rate by accurately diagnosing issues, arriving fully prepared with necessary tools and parts, and effectively completing repairs during the initial service call., • Response Time: Respond to service requests within JSP's defined time frame. Timely response ensures customer comfort and builds trust., • Service Revenue Generation: Diagnose and troubleshoot HVAC equipment issues, recommending appropriate solutions and discussing options with customers. Consistently meet or exceed monthly service revenue targets, contributing to the company's financial growth and success. Identify opportunities for upselling and cross-selling additional services, products, or maintenance plans to customers during service visits., • Service Agreement Enrollment: Successfully enroll customers in JSP’s service agreements, promoting long-term customer relationships and recurring revenue., • Productivity and Utilization: Maintain a high level of productivity by efficiently managing work orders, minimizing downtime, and maximizing billable hours., • Technical Excellence: Perform routine maintenance, inspections, and repairs on residential HVAC systems to ensure optimal performance and efficiency. Demonstrate continuous improvement in technical skills and knowledge through training, certifications, and staying updated on industry best practices., • Inventory Management: Keep track of service vehicle inventory and parts stock, ensuring accuracy and minimizing unnecessary expenses due to missing or overstocked items., • Safety Adherence: Maintain a perfect safety record by following all safety protocols and guidelines. Ensure zero safety incidents or accidents within the performance period., • Documentation Accuracy: Maintain accurate and up-to-date records of service calls, work performed, and parts used in the Service Titan platform., • Team Collaboration: Collaborate effectively with team members, sharing knowledge and assisting colleagues as needed. Strive to maintain a positive team dynamic and contribute to a supportive work environment., • Professionalism and Communication: Uphold professional communication and appearance at all times when interacting with customers., • Attendance and Punctuality: Maintain a consistent record of punctuality and attendance, arriving at scheduled appointments on time and adhering to the assigned work schedule.

Job DescriptionJob Description ABOUT THE JOB You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging out with friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's is the perfect place for you. We are searching for qualified customer service reps with Personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you. ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From customer service representative to management, General Manager to Manager Corporate Operations or Franchisee, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's, our people come first! JOB REQUIREMENTS You must be 16 years of age or older. General job duties for all store team members: • Operate all equipment., • Stock ingredients from delivery are to storage, work area, walk-in cooler., • Prepare product., • Receive and process telephone orders., • Take inventory and complete associated paperwork., • Clean equipment and facility approximately daily. Training • Orientation and training provided on the job. Communication skills Essential Functions/Skills • Ability to add, subtract, multiply and divide accurately and quickly (may use calculator)., • Must be able to make correct monetary change., • Verbal, writing, and telephone skills to take and process orders., • Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed., • Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS • Exposure to:, • Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks., • In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas., • Sudden changes in temperature in work area and while outside., • Fumes from food odors., • Exposure to cornmeal dust., • Cramped quarters including walk-in cooler., • Hot surfaces/tools from oven up to 500 degrees or higher., • Sharp edges and moving mechanical parts. SENSING • Talking and hearing on telephone., • Near and mid-range vision for most in-store tasks., • Depth perception., • Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions Additional Information PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking • For short distances for short durations., • Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting • Bulk product deliveries are made twice a week or more and are unloading by the team member using a hand truck., • Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'., • Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried front he workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Stooping/Bending • Forward bending at the waist is necessary at the pizza assembly station., • Toe room is present, but workers are unable to flex their knees while standing at this station., • Duration of this position is approximately 30-45 seconds at one time, repeated continuously during the day., • Reaching is performed continuously; up, down and forward., • Workers reach above 72 occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves., • Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes., • Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Hand tasks • Eye-hand coordination is essential. Use of hands is continuous during the day., • Frequently activities requires use of one or both hands., • Shaping pizza dough requires frequent forceful use of forearms and wrists., • Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter., • Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes., • Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes., • Machines, Tools, Equipment, Work Aids, • Team members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel.

Job DescriptionMaster ElectricianJohn S. Parker is hiring a full-time licensed Electrician with 5+ years of successful experience to service Kingston, NY and surrounding counties, and who is seeking an opportunity for growth with an industry leader.At JSP we pride ourselves on being a professional, customer service-driven, HVAC/Plumbing/Electrical organization and we are seeking employees of like mind and ambition to join Team Sila!Compensation package includes an hourly rate ($35 - $48+), company vehicle, company paid cell phone, opportunities for commission, medical/dental/vision insurance, Paid Time Off & Holidays, 401(k) with company match program, company paid short and long disability insurance, and company paid life insurance. We offer more than any other company in the industry for the most qualified electricians guaranteed!!!Essential Duties and Responsibilities· Wiring up HVAC systems and generators.· Service upgrades.· Performs residential service calls and whole home generator maintenance calls.· Completes residential Electrical services/installations in a timely manner. General Responsibilities· Performs all tasks and duties in an efficient and safe manner.· Performs other related duties as assigned or as necessary. Remains flexible and adaptable in work schedules and work assignments as defined by departmental and organizational needs.· Represents Sila Heating & Air Condition in a manner that conveys professionalism, confidentiality, courtesy, fairness, personal integrity, and respect for others. Skills & Education Required· 5+ years of residential electrical experience.· Customer Service oriented.· Master’s License required.EOE F/M/V/D$35+Hourly plus commission and bonus's ($48+) based on level of experience.Job Type: Full-timePay: $35.00 - $48.00 per hourExpected hours: No less than 40 per week Schedule:Monday to FridayPeople with a criminal record are encouraged to applyAbility to Relocate:Kingston, NY: Relocate before starting work (Required)Work Location: On the roadJob Type: Full-timePay: $35.00 - $48.00 per hourExpected hours: No less than 40 per weekLicense/Certification: Driver's License (Preferred)Master Electrician (Preferred)Electrical License (Preferred) Ability to Relocate: Kingston, NY: Relocate before starting work (Required) Work Location: On the road We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

• Job Identification 115158, • Job Category Quality, • Posting Date 05/01/2026, 04:21 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Responsibilities: • Manages the Quality Assurance department: Supervise and appraise performance for all Quality Assurance personnel; hire, train and recommend salary adjustments for reporting employees. * Schedule and track inspection, lab, and testing activities to achieve maximum effectiveness and efficiency. • Interprets pertinent customer, corporate and division quality standards for plant personnel; develops and maintains site procedures and processes in support of division Quality Assurance Manual. Leads and promotes the quality assurance philosophy including preventive quality systems., • Implements/maintains procedures for inspection, disposition and record retention for incoming raw materials and components, reviews quality issues with suppliers and provides supplier surveillance assistance as needed., • Proactively involved in corrective action and problem-solving strategies. Actively pursues and identifies root cause of non-conformance, is responsible for measurement of non-conformance costs and secures and maintains data collection and statistical systems to aid in process control, root cause problem identification. Coordinates regular management meetings to review corrective action and quality systems. Publishes regular reports and identified trends., • Interfaces with Customers, Engineering and Operations to identify requirements, plan for product realization and support continuous improvements in manufacturing processes and systems., • Ensures that Gage calibration system is effective and complies with company operating procedures. Maintains a system for calibrating all key inspection, gaging and process instruments and works with vendors to improve inspection techniques and equipment., • Responsible for ensuring compliance with ISO9001 and Industry regulatory requirements. Coordinate and conduct customer and accreditation audits. Enhance and implement the internal audit system and associated corrective actions. Leads training efforts for HFS-Kingston employees regarding total preventive quality., • Develop effective relationships with all levels of staff and functional groups. Possess an ability to influence outcomes, with higher-order communication, change management, and influencing skills., • Be a skilled people manager and developer that deeply understands the importance of challenging, motivating, and developing high-performance teams. Enjoy and have experience in coaching and mentoring others to achieve success in fluid, project/team-based environments., • Bachelor's degree from an accredited university required. Preferred to be in Engineering, Metallurgy, Mechanical Engineering, or related field., • 5+ years experience with preventive Quality Systems or relative military experience. 3+ years of supervisory level experience overseeing Quality Systems. • Demonstrated record of achievement in improving operational metrics., • Ability to handle multiple projects concurrently and reprioritize as needed., • Excellent problem-solving and analytical skills., • Strong leadership and interpersonal skills, with the ability to effectively communicate and collaborate cross-functionally. Preferred Qualifications • Experience with mechanical inspection equipment such as micrometers, optical comparators, hardness testers, and torque testers., • Demonstrated ability to influence site culture and drive cultural transformation towards proactive quality assurance practices., • Experience in leadership, mentoring, and project management., • Basic knowledge of SPC methods., • ASQ Certifications: CQE, CQM, CRE, CQA or CSSBB, • Lean 6 Sigma Certification, • Knowledge of and direct experience with AS, IATF 16949, ISO 9001, ISO 17025, NADCAP Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 115112, • Job Category Supply Chain, • Posting Date 05/01/2026, 04:26 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Job duties and Responsibilities: • Cost of Goods Sold Savings: The incumbent is responsible for identifying and implementing cost reduction activities at the location using the optimized process;, • The incumbent should be striving to achieve maximum leveraging of Howmet's spend, should use on-line-bidding, low cost country sourcing and supplier collaboration to reduce costs. Cost reduction efforts should focus on unit price as well as product design, substitution and consumption reduction efforts based on root cause problem solving and process improvement;, • Develop sourcing strategies by analyzing the supply base, market conditions, and technology roadmaps,, • Lead contractual negotiations with suppliers on NDA's, Terms & Conditions and Long-term agreements, • Identify potential suppliers, analyze capabilities, and develop a sourcing strategy and roadmap for Howmet stakeholders, • Perform detailed analysis of supplier quote submissions based on cost breakdown data and support it with Total Cost of Ownership and should-costs., • Working Capital Improvements: The incumbent is responsible for implementing payment terms, which provide Howmet with a favorable working capital position, without compromising integrity. The incumbent is also responsible for evaluating inventories of purchased material and for driving inventory reduction initiatives through consignment, vendor managed inventories, shared inventories, process improvement and other inventory management tools;, • Procurement Process Cost Reduction: The incumbent should strive for procurement process optimization and waste elimination;, • Purchasing Goods & Service to Support Operations: The incumbent is responsible for ensuring the location is supplied with goods and services required to maintain continuous operation, as required by business conditions. The incumbent is responsible for weighing appropriate risk factors when making buy/supply decisions;, • Compliance: The incumbent is responsible for compliance with all applicable Howmet standards and local regulations for the location. The incumbent may be required to provide data for procurement related ASAT, customer ISO and other audit protocols required by the business. The incumbent is also accountable for any corrective actions generated by audits affecting buying activities at that location. Acts as Single Point Accountability (SPA) for import compliance, including ITAR compliance. Salary range - $75,000 to $95,000 annual , Education Requirements • Minimum of an Associate degree is required, preferred to be in Engineering, Business or Accounting. Basic Qualifications • Minimum of seven (7) years' experience in a high-volume component manufacturing environment, • Minimum of five (5) years of that time in strategic sourcing, supply chain logistics experience;, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Preferred Qualifications • Preferred Bachelor's degree in Engineering, Business or Accounting. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 117501, • Job Category Engineering, • Posting Date 05/05/2026, 05:20 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Role and Responsibilities: * Accurately details parts and assemblies; * Create engineering drawings and designs for production and manufacturing; * Prepares required engineering notices and record prints; * Create design specifications, documentation, material lists and BOMs; * Prepares layout drawings as required to support design and engineering efforts; * Prepares TCX's (inspection support drawings used with comparator); * Operates 3D CAD and related equipment such as plotters and printers; * Build prototypes and equipment and provide feedback on design; * Conduct experiments, run diagnostics and collect and analyze prototype testing data; * Performs other related tasks as assigned; * Ensure that all work activities are performed in accordance with established safety and environmental standards. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The annual salary range for this position is $60,000 - $70,000 , • Three (3) years' experience drafting in a mechanical engineering group using 3D CAD (Computer Aided Design). NX Preferred., • Experience in product development or testing or an equivalent combination of experience and education sufficient to successfully perform the specific duties of the job such as those listed above., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position;, • This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. * NX experience

• Job Identification 117254, • Job Category Operations, • Posting Date 05/15/2026, 10:05 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Job duties and Responsibilities: • Partners with Production Planners and Customer Service to develop plant schedules and delivery;, • Responsible for the development of weekly/monthly sales plans to meet budgetary requirements;, • Provides direction and oversight to Planners who prepare the weekly launch plan for production;, • Monitors raw material inventory and procurement/delivery performance;, • Responsible for analysis and evaluation of inventory and associated delivery performance problems;, • Interface with operations, production planning, engineering, quality and sales departments to resolve production flow problems in order to maximize throughput to the dock;, • Responsible for commit accuracy and collaborates toward on-time delivery;, • Creates seamless customer experience through collaboration with customer service;, • Works toward reduction of costs within related fields such as inventory, outside services;, • Evaluate issues and provide solutions under high-pressure circumstances;, • Responsible for ongoing coaching and development of staff;, • Maintains high ethics and values in the workplace; Participate in and provide input to assigned process improvement and C.I. teams; * Other duties as assigned. , Basic Requirements: • Minimum of 5 years of management experience in manufacturing job shop environment, including production planning and inventory control responsibilities, • Experience with integrated MRP/ERP systems Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position; * Advanced MS Excel, PowerPoint, and database management skills * Exceptional written and verbal communication skills * Ability to effectively interface with all levels of staff * Familiarity with ISO standards, 5S and Lean experience. Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email ___

• Job Identification 115831, • Job Category Engineering, • Posting Date 01/22/2026, 10:38 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Role and Responsibilities: • Create drawings and working layouts of proposed designs;, • Performs analysis of forces, stresses, dynamics and critical performance parameters;, • Follows up drafting, detailing, prototype manufacture and performance evaluation as assigned;, • Participates in project reviews as needed to evaluate progress or investigate project problems;, • Maintains Engineering documentation in accordance with specified standards;, • Cooperates with Sales Personnel, System Specialists and other field and Divisional Personnel as needed;, • Support cost saving activities through design or process changes;, • Performs other related tasks as assigned;, • Ensure that all work activities are performed in accordance with established safety and environmental standards., * Minimum Bachelor's degree. Preferably in Mechanical Engineering. Basic Qualifications: * Five to eight (5-8) years of experience in an engineering role; • Working knowledge of CAD and computer technology;, • Working knowledge of FEA software;, • Project management skills - leading development and standardization of hydraulic power units;, • Language skills - proficiency in Japanese, particularly technical communication; Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position; * This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. * Experience with hydraulic, pneumatic systems: * Experience with motor control circuits; * Experience with PLC programming; * Experience in a manufacturing environment; * Experience with international business. Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation., • The annual salary range for this position is $80,000 - $90,000. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email ___

• Job Identification 117535, • Job Category Operations, • Posting Date 05/11/2026, 04:41 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Role and Responsibilities: • Prepare product for shipment, including picking items, county of origin verification, packing and completing all required documentation. Ensure all Export requirements are met;, • Receive deliveries and process paperwork in system. Deliver and stock in at defined location;, • Move parts from manufacturing work centers as needed, ensuring outsourcing items are prepared to meet pick up schedule;, • Maintain Steel room, including, material identification, proper storage and accurate system inventory;, • Complete daily cycle counting;, • Perform troubleshooting activities on discrepancies in all areas of the department; Maintain 5S in assigned area, including updating charts; • Performs duties of Operator as required;, • Perform all other duties assigned; Ensure that all work activities are performed in accordance with established safety and environmental standards. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The annual salary range for this position is $22.82/hr - $26.18/hr. , Basic Requirements: • High School diploma or GED • One years' experience in a manufacturing or warehouse environment;, • Ability to operate Mobile Equipment;, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position; * One-year experience in a shipping/receiving role. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email ___

• Job Identification 117384, • Job Category Operations, • Posting Date 04/30/2026, 02:56 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation;, • Salary range $26.70 per hour - $33.48 per hour Job duties and Responsibilities: * Troubleshoots and repairs electrical, mechanical, pneumatic, hydraulic systems to the component level on all types of equipment. Utilizes control functions in maintaining and troubleshooting machines; * Develops, coordinates, monitors, and performs preventative maintenance programs in collaboration with operators and other machine repair persons; * Keeps all lighting and switches on all machines in good working order; * Keeps all safety devices in good working order and levels machines as required; * Maintains and replenishes spare parts and repair parts inventory system; * Performs other related duties as required including those in the Laborer classification. , * High School diploma or GED Preferred Education: * Associate degree in Auto Mechanics Basic Qualifications: * Minimum of three (3) year experience in equipment/vehicle maintenance position; * Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position; , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Job Description Maintenance Mechanic Position Summary: We are seeking a skilled Maintenance Mechanic responsible for troubleshooting, repairing, and maintaining manufacturing equipment and production systems. This role supports daily operations by minimizing downtime and ensuring all machinery is operating safely and efficiently. Key Responsibilities: • Perform preventative, predictive, and corrective maintenance on production equipment, • Troubleshoot mechanical, electrical, pneumatic, and hydraulic systems, • Repair and replace defective components including motors, conveyors, belts, valves, and bearings, • Read and interpret blueprints, schematics, and technical manuals, • Conduct routine inspections to identify potential equipment issues and implement solutions, • Complete work orders, maintenance logs, and documentation in maintenance systems (CMMS if applicable), • Support equipment installations, upgrades, and changeovers, • Fabricate or modify machine parts as needed using shop tools (welding, machining, etc.), • Communicate with production teams regarding equipment status and downtime, • Maintain spare parts inventory and assist with ordering materials, • Follow all safety procedures including LOTO and maintain a clean work environmentQualifications:, • High School Diploma or equivalent; technical training preferred, • Experience in industrial or manufacturing maintenance, • Strong mechanical aptitude with working knowledge of electrical, hydraulic, and pneumatic systems, • Ability to troubleshoot and repair production equipment independently, • Ability to read blueprints and technical diagrams, • Experience using hand and power tools and precision measuring equipment, • Strong problem-solving skills and attention to detail Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionLead Press Brake Operator (CNC) – Kingston, NY Pay: $25–$35/hour (based on experience) Schedule: Full-time, Monday–Friday | 1st Shift (7:00am–3:30pm) Now Hiring: Experienced Press Brake Operator in Kingston, NY A growing manufacturing company in the Kingston area is seeking a Lead Press Brake Operator with hands-on CNC fabrication experience. This is a long-term, full-time opportunity offering competitive pay, steady hours, and the chance to work with a skilled production team. If you have experience with CNC press brake machines, blueprint reading, and metal fabrication, this could be the right fit for you. What You’ll Do • Set up and operate CNC press brake machines (Amada, Cincinnati, or similar), • Interpret blueprints, technical drawings, and work orders, • Select appropriate tooling and perform full machine setups, • Perform precise metal bending and forming operations to meet specifications, • Inspect finished parts using calipers, micrometers, and measuring tools, • Adjust machine settings to ensure accuracy and consistency, • Maintain a clean, safe, and organized work environmentWhat We’re Looking For, • 2+ years of press brake setup and operation experience, • Strong knowledge of CNC machinery in a manufacturing or fabrication environment, • Ability to read and interpret blueprints and schematics, • Experience working with sheet metal fabrication, • High attention to detail and commitment to quality, • Ability to work independently and take initiative as a lead operatorWhy This Job?, • Competitive hourly pay: $25–$35/hour, • Stable, full-time 1st shift schedule, • Opportunity to grow with a reputable manufacturing company #Recruitment2026 #ZRCompany DescriptionEthan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley. Whether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!Ethan Allen Workforce Solutions offers job seekers and employers the most complete, leading-edge employment services in the Hudson Valley.\r\n\r\nWhether you are looking for employment opportunities, quality employees or off-site personnel services such as payroll, employee benefits or risk management, we are experts in meeting the needs of workers and companies across the Hudson Valley!

• Job Identification 116107, • Job Category Quality, • Posting Date 02/18/2026, 07:04 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time, • Export-Controlled Data No , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Job duties and Responsibilities: * Coordinates department personnel to ensure day-to-day requirements are being met. Including daily work assignments, personnel vacation scheduling and payroll approval; * Develop, apply and maintain quality requirements, standards and procedures for development and manufacturing products. Acts as single point of accountability (SPA) for ISO 9001 Internal Audit program, including Lead Auditory role; * Serve as the Quality Assurance resource to department supervisors and manufacturing engineering for problem identification, resolution, loss reporting and corrective/preventive action; * Support concurrent engineering efforts by participating in design development projects representing Quality Assurance and the customer; * Review quality records and performance data, identifying problems needing improvement; * Design and implement methods for process control, process improvement, testing and inspection; * Promote and execute quality standards, inspection processes, test methodology, quality plans, documents and reports; * Interface with supplier and customer quality representatives concerning problems with quality assurance and assure that effective corrective action is implemented; * Support for quality-related customer returns of product and product complaints, including investigation, root cause analysis and corrective action; * Compile, write and deliver training material on quality standards and activities; * Analyze, define, source and implement appropriate measuring devices and gages to assure products and processes produce conforming output; * Travel as necessary to plants, customers and suppliers to advance the QA goals of the business; * Guide and assist in the conduct of system, product and process audits; * Lead and facilitate supplier management quality activity, including supplier performance, approval, audit and corrective actions; * Participate in and provide QA expertise to assigned process improvement and C.I. teams; * SPA for Material Review Board for Non-Conforming Material; * SPA for Gage Calibration program; * Back up for Quality Assurance Manager as required; * Other duties as assigned. , Basic Requirements: * Associate degree required. Preferred to be in Engineering, Business or Operations Basic Qualifications: * Three (3) years' experience in precision metal working or related industry; * Three (3) years in quality/inspection operations, with decision making authority; * Experience with ISO 9001 program; * Experience with measurement/inspection devices. * Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position; * This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee * Knowledge of pneumatic and hydraulic systems Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.

• Job Identification 116669, • Job Category Operations, • Posting Date 04/14/2026, 12:01 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit ___. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. Howmet Fastening Systems, a business unit of Howmet Aerospace, holds the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tall on aircraft and aero engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Headquartered in Torrance, CA: HFS employs over 6,000 people in 11 countries at 31 locations. Job duties and Responsibilities: * Develops and updates process sheets, routings, and operation sketches. Designs production tooling and prepares programs for CNC machines using Computer-Aided Manufacturing (CAM) systems as well as manual programming methods; * Troubleshoots manufacturing operations and provides technical support to the manufacturing floor for production-related issues. Acts as the primary manufacturing liaison with Product Engineering, Accounting, Quality Assurance, and Customer Service departments; * Evaluates manufacturing processes to identify opportunities for improvement, increased efficiency and cost savings. Recommends and coordinates the implementation of process improvements; * Coordinates the evaluation, justification, selection, and implementation of capital equipment on the manufacturing floor; * Prepares cost estimates for the production of new, revised, or low-volume parts; * Maintains and updates routing and Bill of Materials (BOM) data within the Management Information System; * Supports facility engineering efforts by participating in plant layout development and preparation of plant layout drawings; * Recommends and implements product design and specification changes to improve product quality and manufacturability; * Designs and drafts production fixtures and tooling. Evaluates cutting tool requirements and implements appropriate tooling solutions; * Performs other related duties and responsibilities as assigned. Benefits/Salary: * The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation; * Bachelor's degree is required, preferred Industrial, or Manufacturing Engineering. Basic Qualifications: * Five (5) years' experience in a manufacturing environment; * Proficiency in EdgeCam or similar, working knowledge PTC Creo Elements/Direct Drafting and Siemens NX 3-D CAD applications; * Manufacturing experience in metal cutting and CNC machining; * Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Job Description Position Summary The Maintenance Mechanic – Packaging is responsible for maintaining, troubleshooting, and repairing packaging and processing equipment to support safe and efficient production operations. This role performs advanced mechanical and electrical work, including preventive maintenance, equipment repairs, and fabrication, while minimizing downtime and ensuring operational reliability. Key Responsibilities Equipment Maintenance & Repair • Perform preventive maintenance on packaging, screening, and grinding equipment., • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems., • Maintain conveyors, motors, belts, chains, bearings, and production machinery., • Respond to equipment breakdowns and complete timely repairs to minimize downtime. Preventive Maintenance, • Execute lubrication schedules for all moving equipment components., • Perform routine servicing, including inspection of spray systems and equipment components., • Conduct scheduled maintenance on motors and facility equipment., • Maintain and replace consumable parts as needed. Technical Expertise • Diagnose and repair electrical systems, including AC motors and Variable Frequency Drives (VFDs)., • Adjust, remove, and install conveyor systems and related components., • Perform welding and fabrication using MIG and arc welding equipment., • Operate cutting tools, including oxy-acetylene and plasma equipment., • Assist with equipment modifications, rebuilds, and installations. Qualifications Education & Experience • High school diploma or equivalent required., • Minimum 5 years of maintenance experience in a manufacturing environment, or equivalent combination of education and experience., • Experience with packaging or industrial processing equipment preferred. Technical Skills • Strong mechanical and electrical troubleshooting ability., • Experience with: o Motors, conveyors, and automated equipment o Variable Frequency Drives (VFDs) o Welding and fabrication o Preventive maintenance programs Physical Requirements • Ability to lift up to 65 lbs with or without assistance., • Frequent standing, walking, bending, kneeling, and working around machinery., • Ability to work in a manufacturing environment with noise, dust, and varying temperatures. Applicants may be subject to a background check and pre-employment drug screen.* *A conviction does not automatically disqualify you from employment. We will consider factors such as your age at the time, the timing and nature of the offense, its seriousness, and any rehabilitation efforts when determining your suitability for the role. Sparrow Company Executive Search & Staffing is an Equal Opportunity Employer.

Job Description Job Summary The Maintenance Technician supports safe and reliable plant operations by performing preventive maintenance, troubleshooting, and repairing manufacturing equipment and facility systems. This role requires strong mechanical and electrical fundamentals, the ability to read schematics, and the discipline to document work completed and communicate across shifts. Essential Duties & Responsibilities • Perform preventive maintenance (PMs) and routine inspections on production equipment and facility systems to ensure safe, efficient operation., • Troubleshoot and repair mechanical, electrical, pneumatic, hydraulic, and plumbing issues as needed., • Use diagnostic tools (e.g., multimeter/ohmmeter) to isolate faults, confirm repairs, and verify equipment performance., • Support basic PLC troubleshooting (identify faults, verify sensors/inputs/outputs, assist with resets and root cause investigation)., • Perform welding/fabrication tasks for repairs, guards, brackets, and minor modifications (as qualified)., • Read and interpret schematics, wiring diagrams, and equipment manuals to diagnose problems and implement repairs., • Complete a daily job card/shift log documenting work performed, downtime causes, parts used, and follow-up needs., • Execute shift handoff communication (written notes and/or verbal pass-down) to ensure continuity of repairs and open work orders., • 3+ years (or equivalent) experience in manufacturing/production maintenance with strong mechanical knowledge., • Demonstrated ability to troubleshoot electrical systems and perform repairs safely., • Ability to use diagnostic tools (including an ohmmeter/multimeter)., • Ability to read and interpret schematics/wiring diagrams., • Experience with PLCs (Allen-Bradley, Siemens, etc.) in a manufacturing environment., • Welding experience/certification., • Trade school or technical certifications (industrial maintenance, electrical, mechatronics, etc.)., • CMMS experience (work orders, PM scheduling, parts tracking)., • Regular exposure to a manufacturing environment (noise, moving machinery, temperature changes)., • 401(k) + matching, • Medical / Dental / Vision, • Flexible Spending Accounts- Health & Dependent Care Options, • Paid time off, • Company Paid Life Insurance/STD/LTD, • Employee Education Assistance Program Applicants may be subject to a background check and pre-employment drug screen.* *A conviction does not automatically disqualify you from employment. We will consider factors such as your age at the time, the timing and nature of the offense, its seriousness, and any rehabilitation efforts when determining your suitability for the role. Sparrow Company Executive Search & Staffing is an Equal Opportunity Employer.

• Job Identification 117383, • Job Category Operations, • Posting Date 04/30/2026, 02:59 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Job duties and Responsibilities: * Ensure all workcenters have work available as per dispatch or Supervisor direction, including all material, prints, OP sketches and Inspection sheets. Ensure all documentation is within workorder packet are to latest revisions; * Ensure workcenter internal outgoing racks are moved on a timely basis each day; * Maintain raw material locations, including marking material as needed, stored in identified locations in a timely manner and areas meet 5S requirements. * Performs Operator duties and other related duties as required. Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation; * High School diploma or GED Preferred Education: Basic Qualifications: * Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. * Manufacturing production experience. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 117049, • Job Category Operations, • Posting Date 05/05/2026, 05:52 PM, • Locations 1 Corporate Drive, Kingston, NY, 12401, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Job duties and Responsibilities: • Implements and maintains procedural and computer systems for Total Productive Maintenance (TPM), including autonomous Maintenance (AM), Preventative Maintenance (PM) and Predictive Maintenance (PdM) of all production equipment and related Operational Excellence (OPEX) standards;, • Directs the maintenance and repair of manufacturing and process equipment;, • Supervises the activities of technical personnel, skilled workers and contractors to achieve efficient and effective maintenance operations. Makes recommendations for hire, disciplinary action, and promotion;, • Participates in equipment selection and directs the installation of new equipment, SPA for equipment disposal;, • Directs facility projects and maintenance; reviews and approves all facility-related expenses. Prepares documents needed for approval of facility capital project funds, including the on-line RFA process;, • Responsible for facility compliance to applicable regulatory codes;, • Orders equipment repair parts and supplies. Maintains associated records and stock levels. Maintains the critical spares inventory;, • Budget and cost control responsibilities for parts, supplies and expenses;, • Manages contractors involved with plant facilities, equipment and maintenance;, • Oversees facility fire and physical security systems to ensure effective protection of personnel and property;, • Interfaces with utility providers;, • Actively supports plantCI projects, including Kaizen events, Daily Management and root cause problem solving;, • Manages all site mobile equipment and related safety requirements;, • Maintains compliance with Company policies, safety standards, and good housekeeping procedures, including 5S controls., • Five years' experience in a supervisory role in a manufacturing environment:, • Minimum of Associates degree preferably in a mechanical or electrical technical field;, • Basic knowledge of preventive maintenance program;, • Proficient with Microsoft excel and Word;, • Basic knowledge of Lean Manufacturing;, • Broad knowledge of facility technical systems and applicable codes and regulations;, • Effective time management; organize and manage multiple priorities;, • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation;, • The annual salary range for this position is $85,000 - $95,000 , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Job DescriptionJob Description: About Ruges Automotive Inc Ruges Automotive Inc is looking for a dedicated Automotive Service Advisor to join our team in Rhinebeck, NY. We value outstanding customer service built on strong communication, product knowledge, and professionalism. This is a full-time position offering competitive compensation and comprehensive benefits. Job Details Salary: From $80,000 to $120,000 per year Job Type: Full Time Location: Rhinebeck, NY 12572 Key Responsibilities Greet service customers promptly and professionally. Inspect vehicles and review service history to determine customer needs. Promote appropriate services, parts, and accessories by understanding product details. Provide accurate estimates for costs and completion times, and obtain customer authorization. Monitor service progress, communicate updates, and receive approvals for any changes. Administer warranty repairs following manufacturer guidelines. Confirm service appointments by phone prior to customer arrival and conduct post-repair follow-up. Inspect vehicles before delivery to ensure repair quality and communicate results to customers. Comply with state and federal automobile repair and consumer protection laws. Maintain behaviors consistent with company values in interactions with customers, coworkers, and vendors. Work Hours This role is full-time with standard business hours. Specific scheduling details will be provided during the hiring process. Job Requirement: High school diploma or equivalent. Valid driver’s license with a good driving record in the working state. Positive attitude with a high-energy personality. Excellent customer service skills. Professional appearance and strong work ethic. Ability to work effectively in a process-driven environment. Outstanding verbal and written communication skills. WHAT WE OFFER: Tremendous product & inventory Ongoing company-wide training Strong company reputation Growth opportunities Professional, enthusiastic & supportive working environment When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug-free workplace. We Would Really Like To Hear From You!

Job Description Job Title: Controls Engineer Job Description The Controls Engineer installs, programs, and maintains industrial automation systems, ensuring reliable operation of plant equipment and supporting occasional system start-ups and commissioning at customer sites. This role combines electrical, mechanical, and controls expertise to build and support hydraulic power units, troubleshoot PLC-based systems, and keep manufacturing equipment running safely and efficiently. Responsibilities • Install automation systems from initial rough-in through termination, ensuring all electrical and control components are correctly wired and integrated., • Program PLCs and configure control systems to meet equipment and process requirements., • Troubleshoot, diagnose, and repair automation and control system issues to minimize equipment downtime., • Perform ongoing maintenance on electrical, mechanical, and electro-mechanical systems in a manufacturing environment., • Build and assemble hydraulic power units for plant equipment, including integration with control systems., • Interpret and work from blueprints, electrical drawings, and schematics to install, modify, and repair equipment., • Support occasional start-ups, commissioning, and troubleshooting at customer sites, including travel as needed., • Respond to off-hour emergencies to restore equipment and system functionality when required., • Collaborate daily with mechanics, operators, and other team members across multiple shifts to resolve equipment issues and improve system performance., • At least 5 years of experience in electrical, electronics, controls/automation, and/or system maintenance in an industrial or manufacturing environment., • Strong knowledge of PLC controls and software, particularly with Allen-Bradley and Omron systems., • Hands-on experience with PLC programming, troubleshooting, and modification of control logic., • Ability to read, interpret, and work from blueprints and electrical schematics., • Practical experience with electro-mechanical systems, including hydraulics and pneumatics., • Proficiency in troubleshooting automation and manufacturing equipment issues., • Valid driver’s license to support occasional travel to customer sites., • Ability to respond to off-hour emergencies as needed., • Basic set of personal hand tools suitable for electrical and mechanical work., • Experience working on manufacturing machinery similar to those used in industrial production environments., • Experience as a maintenance technician in a manufacturing or industrial setting., • Experience in a growing organization with evolving automation and controls needs., • Strong communication and teamwork skills to work effectively with mechanics, operators, and engineering staff. This position is based in a manufacturing facility and operates on a day shift schedule from 8:00 a.m. to 4:30 p.m., Monday through Friday. The Controls Engineer works closely with 3–4 other mechanics and interacts regularly with a mix of first and second shift operators, totaling roughly 55 team members across both shifts. The environment involves hands-on work with industrial automation, manufacturing equipment, hydraulic power units, and PLC-based control systems. Occasional travel to customer sites is required for system start-ups, commissioning, and troubleshooting. The company supports professional development and offers opportunities to grow within a larger corporate structure. The dress code includes jeans, a short or long sleeve shirt appropriate to the weather, and steel-toed boots for safety on the shop floor. Job Type & Location This is a Contract to Hire position based out of Kingston, NY. Pay and Benefits The pay range for this position is $34.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Assistant & Service Managers Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Assistant and Service Managers to join Team Mavis at one or our state-of-the-art automotive service and retail tire sales centers in the Stone Ridge, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Assistant Manager As a future leader of Mavis, the Assistant Manager supports the Store Manager to ensure each Mavis retail location operates efficiently, safely and effectively. Using fundamental leadership skills, Assistant Managers are responsible for enforcing established policies, procedures and standards, scheduling mechanics/technicians' work, managing outside orders, ensuring the quality and timely completion of jobs, meeting customer expectations, and the safety of team members About the Position of Service Manager The Service Manager is responsible for assisting customers with tire selections and recommending necessary under-car repair services. In addition, to ensure complete customer satisfaction by delivering timely completion of high-quality vehicle repair and maintenance, Service Managers must direct the workflow of Mechanics, Alignment Technicians and Tire Technicians and stage vehicle repair/maintenance work. While driving the sales initiatives of Mavis, Service Managers must communicate directly with customers, assess customer needs, provide information regarding requested and/or necessary automotive repairs and maintenance, ensure customers are satisfied with their in-store experience and strive to meet customer expectations. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Assistant / Service Manager, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess (i) 1 year of experience and/or training in automotive parts and/or tire sales, (ii) 1 year of experience and/or training in automotive repairs/maintenance, or (iii) any combination of education, training, and experience which demonstrates the ability to perform the duties and responsibilities of the position. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Lia Honda Kingston is seeking experienced bilingual Salesperson with a proven track record selling new and used vehicles while maintaining exemplary CSI. We are focused on delivering an excellent customer experience and creating long term, repeat business relationships with all our customers. COMPENSATION RANGE: $50K-$100K+ SIGN ON BONUS: N/A REQUIREMENTS: • Punctual and reliable, • Superior customer service skills, • Willing to work evenings and Saturdays, • Ability to respond well to direction and suggestions of management, • Ability and desire to achieve individual and department goals, • Comfortable speaking with customers over the phone, via email and text, and face-to-face, • Ability to negotiate in accordance with trained method, • Must have a clean and valid driver's license KEY RESPONSIBILITIES: • Approach, greet, and offer assistance to customers who enter the dealership lot or showroom, • Develop a very strong understand of automobiles and our offerings; including features, trim levels, capabilities, competitive models, etc., • Qualify customers by understanding their requirements and interests and using this information to determine the best vehicle and options to fit their needs, • Demonstrate and perform "walk-around" by successfully explaining features, safety, characteristics; perform test-drives and explain warranties, safety ratings, and fuel mileage, • Overcome objections in a highly efficient manner to close deals; negotiate and ask for deals, complete pre-sale documents, work with customer's insurance companies, • Set realistic expectations with customer and guide them throughout the entire vehicle purchasing process, • Develop strong rapport with new and repeat customers to ensure repeat business and referrals; suggesting trade-ins, responding quickly to customer inquiries, recommending various sales campaigns, • Follow-up with sold and unsold clients through various tools and software, • Report to sales manager and general manager regarding new and pending deals, objectives, daily activities, and analysis BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job DescriptionDescription: Position Overview: Bread Alone Maintenance Specialists keep our facilities and equipment up and running. With diverse skills including electrical, mechanical, plumbing, welding, HVAC, and PLC’s the Maintenance Specialists work independently and collaboratively to be solution providers in an internal customer service environment. Bread Alone Specialist hold themselves and their teammates accountable to Bread Alone safety, culture, and employee conduct standards. They have the ability to take action and be effective with competence and autonomy. They collaborate across functions and teams and support the department and company goals. Maintenance Specialists are required to have at least one year of prior experience or actively enrolled in an approved apprenticeship program. Starting pay is based on experience. Schedule Full-time; Sunday, Monday Tuesday, Wednesday- 10pm to 830am or 2pm to 1230am We strive to make schedules as manageable as possible to encourage and allow work-life balance. Bread Alone's Worldview: Bread Alone Began in 1983 with simple intention: To feed people organic bread baked from a wood-fire brick oven. We run the bakery today with the optimistic belief that good food, an equitable economy and a healthy planet can thrive together. At the heart of our endeavors lies the profound belief that individuals are integral to every positive impact we make. Join us as we collectively strive for excellence in aligning our aspirations with meaningful actions. Requirements: Duties and Responsibilities: Duties, Responsibilities, and essential job functions include but are not limited to the following: • Ensure daily preventative maintenance is performed on equipment as designated by the Director or VP of Facilities., • Ensure proper sign-off of work orders has been completed by submitting manager, • Provide updates regarding ongoing projects during the weekly maintenance meeting, • Conduct inventory of assigned equipment spare parts, compiling parts orders to be reviewed by the Director or VP of Facilities when necessary, • Identify best practices for maintaining equipment in and around the facility, • Continually learning from colleagues, outside service technicians, and enrolling in classes, • Utilize the work order system to respond to unscheduled maintenance and to follow up with other stakeholders, • Adept with a multitude of specialized tools and equipment, • Computer literate, • Must specialize in at least one industry trade, • Responsible for the safe, efficient, high-quality operation of the facilities and equipment, • Able to stand for long periods of time while executing tasks quickly and accurately, • Able to to work in a physically demanding fast-paced environment, • Able to tolerate exposure to high levels of heat and cold, • Able to twist and bend repeatedly for long periods of time, • Able to pull, push, move and lift to waist level, • Able to carry awkward and shifting weights up to 50 pounds in a safe and controlled manner, • Able to work with, handle, operate, and control hot equipment and products in a safe manner according to Bread Alone guidelines, • Willing to follow all Good Manufacturing Practices which includes but are not limited to: Removing any visible or exposed piercings and body jewelry, personal accessories, false nails & refraining from makeup at work (ie. mascara or heavy foundation, lipstick), • Night, weekend and holiday availability based on the needs of the business, • Respect for and comfort with a diverse and inclusive workplace, • Able and willing to use personal protective equipment (PPE) and assigned uniform as required per company policy, • Able to gain proficiency in operating and instructing on the proper use of all systems (physical and technological) in use in your department, • Willing to follow all safety guidelines set out by Bread Alone, • Willing to take responsibility for your own and others safety by strictly enforcing all safety rules and regulations and taking steps to mitigate any unsafe conditions or practices enlisting the help of others as needed, • The Bakery is open 365 days a year and team members must be willing to work consistently throughout the year which includes holidays and weekends work consistently throughout the year which includes holidays and weekend Compensation: $20.75 - $42.00 Schedule Full-time; Sunday, Monday Tuesday, Wednesday- 10pm to 830am or 2pm to 1230am We Offer • Company-Wide, Rewarding Success Together: We believe in sharing success with our team. Our bonus program is designed to recognize and reward your contributions— the longer you're with us, the greater your potential earnings. As we grow, so do your opportunities to benefit., • Ongoing Growth & Recognition: Your development matters to us. We provide regular check-ins and feedback to support your success—starting with dedicated evaluations at 30 and 90 days for new hires, followed by annual reviews for merit-based growth. Our goal is to help you thrive and be rewarded for your contributions., • Invest in Your Future: We’re committed to helping you build long-term financial security. After just six months, you’ll be eligible for our 401(k) program with a generous employer match of up to 4%—because your future matters as much as your present success., • Prioritizing Your Work-Life Balance: Your time matters—both at work and beyond. Our progressive PTO plan rewards your commitment: 80 hours after year one and 120 hours after year two! The longer you're with us, the more time you’ll have to recharge and enjoy what matters most., • Supporting Your Well-Being: We believe in taking care of our team. Hourly employees accrue wellness time at a rate of 1 hour per 30 hours worked up to 56 hours in the first year. And as a bonus, any unused time is paid out on your one-year anniversary! Prioritize your well-being, knowing your time is valued., • Comprehensive Healthcare through CDPHP, • Dental Coverage with Delta Dental, • Free Vision & Life Insurance—fully covered for all employees, • Invest in Your Future with $2,000 in annual education reimbursement Bread Alone is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We are also committed to compliance with all fair employment practices regarding citizenship and immigration status. We will provide reasonable accommodations for individuals with disabilities and for religious observances, provided that such accommodations do not create an undue hardship for the company.

Job DescriptionCarGuys Inc. -America’s #1 Automotive Recruiter If you are looking for a new career in the car Biz CarGuys Inc. is the go-to company to assist you. We work with dealerships that are looking to hire, all across the country. Anytime you are looking to find a new career…contact us, CarGuys Inc. to assist. We help dealers to hire, from porters all the way up to CEO’s Currently we have a dealership in your area looking to hire Automotive Service Writers These dealerships may offer: Training provided Top Performance Based Pay Programs. Opportunity for Bonus Pay State of the art facilities A clean, fun safe working environment Top shelf benefits including health, dental, retirement plans and more Factory training and reimbursement for state and local certifications Established customer base with a shop packed with hours available Paid Vacation and PTO time Employee Discounts including parts Growth and advancement opportunities Flexible work schedules Long term job security Job Requirements: 1. You must have some experience as a writer 2. State or Local certifications preferred. Automotive service advisor, Automotive Service writer, Automotive dealership service writer, Automotive dealership service advisor, Auto service writer, auto service advisor, auto advisor, auto writer, automotive advisor, automotive writer, Car automotive service writer, car dealer service writer, car dealer service advisor, car service writer, car service advisor, dealership service advisor, dealership service writer, service advisor, service writer, service advisor automotive *You are applying through Car Guy’s Inc, America’s and Canada’s #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job Description Lia Honda Kingston is seeking an experienced, high performing professional to join out growing Fixed Operations teams as Assistant Service Manager/Lead Service Advisor. This role is a leadership-track position to grow our service business, elevate customer experience and drive operational excellence. COMPENSATION RANGE: $85K-$130K SIGN ON BONUS: N/A REQUIREMENTS: • Proven experience in automotive service advisor or service department leadership, • Strong operational mindset with ability to manage both people and processes, ability for coaching, training and developing others, • Track record of driving revenue while maintaining high customer satisfaction, • Excellent communication skills and professional presence, • Organized, performance driven, accountable and comfortable working in fact paced, high volume environment, • Must have clean & valid driver's license KEY RESPONSIBILITIES: • Lead the service advisor team to deliver exceptional customer experience, • Drive work flow efficiency to maximize technician productivity and shop capacity, • Coach, mentor advisors on sales process, communication and CSI performance, • Assist with daily operations including scheduling, dispatch coordination and repair order management, • Monitor KPIs such as labor rate, hours per PO, maintenance penetration and advisor performance, • Step into managerial responsibilities if needed, • Any other duties assigned by manager BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Location: New York (Hudson Valley / Capital Region + Regional Territory) Employment Type: Full-Time The Opportunity Trimmr helps cannabis operators solve one of their hardest problems: executing consistently across cultivation, production, and retail with the right people in place. Today, we deliver that through staffing, production support, and brand activation. Now, we're building a platform that connects workforce, operations, and brand execution into a single system; giving operators more visibility, control, and scalability. We're already working with operators across New York and using those relationships to shape what we build next. This is an early sales hire role: sell real services now, help shape the platform for the future, and have a direct impact on growth. This role is ideal for someone who thrives in a fast-moving environment, takes ownership, and consistently drives results independently. What You'll Do Close and Build Revenue: Prospect and close new business across staffing, production support, and brand activation. Build strong relationships with cultivators, processors, and cannabis brands. Shape the Platform: Identify operational gaps and gather feedback from clients to inform product development. Help position early platform capabilities with the right customers. Own Your Territory: Develop and execute a regional strategy across New York and neighboring states. Travel to facilities, dispensaries, and industry events (25-50%). Build the Sales Motion: Refine messaging, create repeatable processes, and manage pipeline in HubSpot. Maintain disciplined tracking of sales activity. Represent Trimmr: Act as a trusted partner to operators and bring a practical, solutions-oriented approach to every interaction. What We're Looking For • Proven ability to generate and close net-new business, • Comfortable selling real operational solutions, • Ability to understand staffing, production, and brand execution challenges, • Demonstrated ability to manage your own pipeline, priorities, and time without relying on a structured environment, • Excels in fast-moving, evolving environments with high autonomy, • Interest in helping translate hands-on services into tech-enabled solutions, • Base Salary: $55,000, • Commission: Uncapped, directly tied to revenue generated (no cap on earnings), • On-Target Earnings: $90,000+, • Builders who want to turn real-world operations into scalable systems, • Sales professionals who like selling solutions that actually get used You'll be selling real services from day one, while helping shape a platform that makes that work more efficient and easier to run at scale. If you want to build something practical, drive impact, and grow with a company that's moving quickly, this is the role for you.

We're building a world of health around every individual - shaping a more connected, convenient and compassionate health experience. At CVS Health, you'll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger - helping to simplify health care one person, one family and one community at a time. Position Summary Retail Store Associates play a meaningful role within the CVS Health family. At CVS Health, we're shaping the future of health care for people, businesses, and communities. With your talents and expertise, you can help us play a more active and supportive role in each person's unique healthcare needs. Join our team of thousands as we positively impact millions...one customer at a time. The Retail Store Associate position provides an opportunity, in a leading retail setting, to excel in a growing, high impact, customer focused role, working both independently and as a member of a team, to positively impact the lives of others. * Providing differentiated customer service by anticipating customer needs, demonstrating compassion and care in all interactions, and actively identifying and resolving potential service issues * Focusing on the customer by giving a warm and friendly greeting, maintaining eye contact and offering help locating additional items, when needed * Accurately perform cashier duties - handling cash, checks and credit card transactions with precision while following company policies and procedures * Maintaining the sales floor by restocking shelves, checking in vendors, updating pricing information and completing inventory management tasks as directed by store manager * Supporting opening and closing store activities, when needed * Providing customer support to all departments, including photo and beauty, ensuring departments are fully stocked and operational while remaining current with all updated services and tools * Assisting pharmacy personnel when needed, including working regular shifts in the pharmacy as part of opportunities for growth and career development * Embracing and advocating for new CVS services and loyalty programs that support our purpose of helping people on their path to better health * Required Qualifications * At least 16 years of agePhysical Requirements: * Remaining upright on the feet, particularly for sustained periods of time * Lifting and exerting up to 35 lbs of force occasionally, up to 10 lbs of force frequently, and a negligible amount of force regularly to move objects to and from, including overhead lifting * Visual Acuity - Having close visual acuity to perform activities such as: viewing a computer terminal, reading, visual inspection involving small parts/details Preferred Qualifications * Previous experience in a retail or customer service setting Education High School diploma or equivalent preferred but not required. Anticipated Weekly Hours 29 Time Type Part time Pay Range $16.00 - $23.00 This pay range represents the base hourly rate or base annual full-time salary for all positions in the job grade within which this position falls. The actual base salary offer will depend on a variety of factors including experience, education, geography and other relevant factors. Our people fuel our future. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong. Great benefits for great people We take pride in offering a comprehensive and competitive mix of pay and benefits that reflects our commitment to our colleagues and their families. This part-time position is eligible for a range of benefits and programs that support the physical, emotional, and financial well-being of colleagues. Depending on hours worked and eligibility, the benefits for this position include dental, vision, wellness resources, employee discounts, access to certain voluntary benefits, and other programs. Additional details about available benefits are provided during the application process and on Benefits Moments () . We anticipate the application window for this opening will close on: 06/13/2026 Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state and local laws. CVS Health is an equal opportunity/affirmative action employer, including Disability/Protected Veteran - committed to diversity in the workplace.

Responsibilities Howmet Fastening Systems (HFS) in Kingston, NY is looking for a Quality Manager to develop and lead the Quality Assurance system to ensure that manufacturing processes will produce products that meet ISO9001and Quality Assurance Manual. This is a key change-agent position accountable for results, with minimal guidance, in the assigned areas of responsibility. This position will be responsible for developing strategies, priorities and directing implementation in the assigned areas. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Responsibilities: • Manages the Quality Assurance department:, • Supervise and appraise performance for all Quality Assurance personnel; hire, train and recommend salary adjustments for reporting employees., • Schedule and track inspection, lab, and testing activities to achieve maximum effectiveness and efficiency., • Interprets pertinent customer, corporate and division quality standards for plant personnel; develops and maintains site procedures and processes in support of division Quality Assurance Manual. Leads and promotes the quality assurance philosophy including preventive quality systems., • Implements/maintains procedures for inspection, disposition and record retention for incoming raw materials and components, reviews quality issues with suppliers and provides supplier surveillance assistance as needed., • Proactively involved in corrective action and problem-solving strategies. Actively pursues and identifies root cause of non-conformance, is responsible for measurement of non-conformance costs and secures and maintains data collection and statistical systems to aid in process control, root cause problem identification. Coordinates regular management meetings to review corrective action and quality systems. Publishes regular reports and identified trends., • Interfaces with Customers, Engineering and Operations to identify requirements, plan for product realization and support continuous improvements in manufacturing processes and systems., • Ensures that Gage calibration system is effective and complies with company operating procedures. Maintains a system for calibrating all key inspection, gaging and process instruments and works with vendors to improve inspection techniques and equipment., • Responsible for ensuring compliance with ISO9001 and Industry regulatory requirements. Coordinate and conduct customer and accreditation audits. Enhance and implement the internal audit system and associated corrective actions. Leads training efforts for HFS-Kingston employees regarding total preventive quality., • Develop effective relationships with all levels of staff and functional groups. Possess an ability to influence outcomes, with higher-order communication, change management, and influencing skills., • Be a skilled people manager and developer that deeply understands the importance of challenging, motivating, and developing high-performance teams. Enjoy and have experience in coaching and mentoring others to achieve success in fluid, project/team-based environments., • Work in a safe manner that promotes the health and well-being of the individual and the environment. Salary range $90,000-$115,000 Qualifications qualifications • Bachelor's degree from an accredited university required. Preferred to be in Engineering, Metallurgy, Mechanical Engineering, or related field., • 5+ years experience with preventive Quality Systems or relative military experience., • 3+ years of supervisory level experience overseeing Quality Systems., • Demonstrated record of achievement in improving operational metrics., • Ability to handle multiple projects concurrently and reprioritize as needed., • Excellent problem-solving and analytical skills., • Strong leadership and interpersonal skills, with the ability to effectively communicate and collaborate cross-functionally. Preferred Qualifications • Experience with mechanical inspection equipment such as micrometers, optical comparators, hardness testers, and torque testers., • Demonstrated ability to influence site culture and drive cultural transformation towards proactive quality assurance practices., • Experience in leadership, mentoring, and project management., • Basic knowledge of SPC methods., • ASQ Certifications: CQE, CQM, CRE, CQA or CSSBB, • Lean 6 Sigma Certification, • Knowledge of and direct experience with AS, IATF 16949, ISO 9001, ISO 17025, NADCAP Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email ___

Job Description Lia Honda Kingston is seeking ALL LEVEL Automotive Technicians to join our team. If you're an experienced technician looking for a fast-paced, professional, and positive environment that rewards hard-working, reliable, and team-oriented individuals, this is the right place for you! Lia service departments are equipped with the latest technologies & equipment including service drive alignment checker, alignment rack, and Hunter tire mounting and balancing machines. COMPENSATION RANGE: $50K-$110K+ SIGN ON BONUS: N/A REQUIREMENTS: • 3+ years of Service Technician experience required, • Diagnostic, Electrical, and Engine Repair experience required, • State Inspection certification required, • ASE Certification recommended, • Able to operate electronic diagnostic equipment, • Ability to learn new technology, repair, and service procedures and specifications, • Computer skills, • Ability to work in a fast-paced environment, • Perform work specified on the repair order with efficiency and in accordance with dealership processes, • Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, providing an estimate of the time needed for additional repairs., • Medical, Dental and Vision, • 401K Plan with Employer Match, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned Porsche technician ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a Porsche Master Technician to join our elite team. If you specialize in Porsche and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest Porsche and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on Porsche vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit #hc239726

Job DescriptionJob Description: The Lube Technician is expected to: Protect the legal, financial and moral well-being of the dealership; Perform lube, oil, filter and multipoint service for customer vehicles; Be a teacher to support the efforts of other employees to be successful. Seek ways to improve business operations efficiencies and customer service. Primary Duties: 1. Ensure maximum productivity, customer service and cost control. Perform all lube, oil, filter and multi-point inspection processes to ensure proper diagnoses. Assess any supplemental vehicle needs. Perform quality service at all times and notify management of any substandard processes, parts or procedures. Maintain clean vehicles during all servicing and repairs. Achieve customer service satisfaction through prompt and accurate service and communication. Maintain a clean and safe work environment at all times and adhere to all OSHA/EPA requirements. Perform all job duties requested by management. 2. Operate with integrity: Demand the highest ethical standards from self and others. Set an example of positive attitude and professionalism, including a neat, orderly and safe work environment. Set an example of outstanding attendance, positive attitude, professionalism, including orderly and safe work environment. Maintain a neat, orderly and safe work environment Job Requirement:Job Qualifications: High school diploma or the equivalent recommended but not required. One year experience as a technician's assistant or apprentice. Maintain valid driver's license and MVR within company policy requirements. Local state inspection license preferred Physical Requirements: Work performed in shop setting While performing the duties of this job, the employee is exposed to weather conditions precedent at that time. Exposure to shop environment such as noise, dust, odors and fumes, chemicals and adhesives. Required to lift up to a minimum of 100 lbs. Regularly required to sit, stand, bend, reach, talk, hear, use hands and fingers, handle or operate objects, tools or controls. Occasionally required to stoop, kneel or crouch. Required vision include close vision, distance vision, peripheral vision and the ability to adjust focus. Required to operate equipment and move vehicles in a safe manner at all times. To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position: Leadership- the individual demonstrates ethical and followership behaviors which promotes our company standards resulting in a cohesive and effective team. Compliance- the individual understands and adheres to all Company standards, state and federal laws and regulations as well as product pricing guidelines of all lenders, agencies or business partners. Customer Service- the individual understands his/her role in providing excellent customer service through the defined processes which promote efficiencies, fairness and cost effectiveness. Ethics/Integrity- the individual represents the dealership by conducting his/her self in a professional and courteous business manner that demonstrates integrity and avoids the actual or perception of a conflict of interest. Oral Communication- the individual clearly identifies and professionally expresses issues in positive or negative situations. Planning/Organizing- the individual prioritizes and plans work activities and uses time efficiently. Quality- the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Dependability- the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security- the individual observes safety and security procedures and uses equipment and materials properly. Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Job Description Summary: Performs physical tasks involving the movement, storing, and maintenance of lumber and building materials as well as performing customer service and general yard maintenance. Essential Duties and Responsibilities to include but not limited to: • Offers prompt and courteous service to customers by offering assistance and filling orders as shown on their paid invoice. This includes verifying type, quantity, and size of material purchased by customer., • Cuts stock to size required, using stationary power saw. Records these actions on a “cut sheet” to reconcile stock records., • Advises Yard Forman or Inventory Control Specialist of low stock items., • Prepares material for delivery and assists Load Setter and Driver in loading delivery vehicle., • Accompanies driver to assist in off-loading at job site when directed by Yard Forman or Assistant Yard Foreman., • Prepares Return Material Authorization forms (RMA’s) as necessary to confirm type, quantity and size of material returned by customers. This includes verifying the original purchase date and the acceptability of the items’ current condition. Submits the RMA’s for approval., • Responsible for the tidiness and condition of an assigned section of storage area., • Handles material in a safe manner to avoid personal injury, damage to property and damage to product., • Puts stock away as directed by supervisor., • Takes a proactive approach to keeping busy, finding tasks to complete during idle times without direction from a supervisor., • Stacks lumber neatly and safely, and ensure stacks are kept at even levels., • Picks up and disposes of stickers, strapping or any other garbage littering the yard area., • Sweeps and clears all areas of debris, etc., • Performs mowing, weed whacking and snow removal tasks Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and / or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Education and / or Experience High School Diploma or General Equivalency Diploma; or twelve months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to read and comprehend correspondence and memos. Ability to write routine reports and correspondence. Ability to effectively present information in one-on-one and group situations to customers, associates, and venders. Mathematical Skills Ability to apply basic algebra and geometry. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to solve problems and deal with a variety of situations where only limited standardizations exist. Physical Demands The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations can be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly required to use hands to finger, handle, or reach with hands and arms. The associate is required to frequently sit, stand, walk, hear, or talk. The associate is occasionally required to climb or balance; and stoop, kneel, crouch, or crawl. The associate must regularly lift and / or move up to 50 pounds and occasionally lift and / or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an associates encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential duties of this job, the associate is frequently exposed to outside weather conditions. While performing the duties of this job, the associate is regularly exposed to fumes or airborne particles and vibration. The associate is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually loud. Other Forklift training and demonstrated continuing forklift operation competency required.

Job DescriptionDescription: Company Overview: Plimpton & Hills Corporation is a leading distributor of plumbing, heating, HVAC, and industrial products, serving contractors, businesses, and homeowners throughout the Northeast. With multiple branch locations and showrooms, we are known for dependable service, quality products, and knowledgeable support for the professional trades. Position Purpose: The Warehouse & Counter Sales Associate provides friendly, reliable service to contractors and walk-in customers by assisting with plumbing, heating, and HVAC product orders, pulling and staging materials, and supporting daily counter and warehouse operations. This is a full-time position based at our Red Hook, NY branch (7311 South Broadway, Route 9), focused on accuracy, teamwork, and a safe, organized work environment. Essential Functions: • Actively seek opportunities to help customers at the sales counter, parts counter, and by phone, providing excellent customer service to contractors and walk-in customers., • Locate, pull, stage, and obtain ordered HVAC, plumbing, and heating products for customer orders and warehouse fulfillment., • Assist with the handling of defective parts, returns, and manufacturer warranty information in accordance with company procedures., • Process approved customer credits and returns accurately in the order entry and inventory system., • Address customer questions regarding product specifications, pricing, availability, lead times, and part numbers., • Ensure all product catalogs, vendor literature, and pricing materials are current, removing expired or outdated materials as needed., • Accurately and safely move products of varying weights, including pipe, fittings, fixtures, and HVAC supplies, following safety guidelines., • Provide exceptional customer service in a fast-paced warehouse and counter sales environment., • Answer incoming telephone calls professionally and pleasantly, assisting with orders, pricing requests, and product inquiries., • Accurately input, process, and fill customer orders using the company order entry system., • Accurately read, identify, and verify part numbers, SKUs, and quantities for order filling and receiving materials., • Assist warehouse personnel with shipping, receiving, stocking, inventory organization, and general warehouse operations as necessary., • Maintain a clean, organized, and professional counter sales and warehouse work environment., • Safely operate warehouse equipment such as forklifts, pallet jacks, and hand trucks in accordance with safety standards., • Remain up-to-date on all workplace safety practices, warehouse safety procedures, and company standards., • Competitive hourly rate commensurate with experience., • Eligible to participate in the company’s comprehensive benefits package, which includes medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off and paid holidays., • Counter sales, parts counter, inside sales, retail, or warehouse experience preferred, ideally in a plumbing, heating, HVAC, building materials, or distribution environment., • Familiarity with plumbing, heating, and HVAC products, materials, industry practices, and basic regulations preferred; ability to learn product lines and systems quickly., • Results-driven and customer-focused, with the ability to support contractors, trade professionals, and walk-in customers in a fast-paced environment., • While performing the duties of this job, the associate is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard., • Specific vision abilities required by this job include close vision requirements due to computer work., • Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.

Job DescriptionJob Description ABOUT THE JOB You got game? You got spring in your step? You want the best job in the world! And schedules that work with you, not against you? That's right, we live to beat the rush and make it possible to make, bake or take pizzas during the hungry hours of the day and night, part or full time. You'll have plenty of time left over for school, hanging out with friends, or whatever. Sound good? Even if you just need a second job for some extra cash, Domino's is the perfect place for you. We are searching for delivery experts with Personality and people skills. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want), perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, drop us a line. We're bound to have just the thing for you. ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From customer service representative to management, General Manager to Manager Corporate Operations or Franchisee, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's, our people come first! JOB REQUIREMENTS You must be 18 years of age and have a valid driver’s license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for deliver. You should possess navigational skills to read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. General job duties for all store team members: • Operate all equipment., • Stock ingredients from delivery are to storage, work area, walk-in cooler., • Prepare product., • Receive and process telephone orders., • Take inventory and complete associated paperwork., • Clean equipment and facility approximately daily. Training • Orientation and training provided on the job. Communication skills Essential Functions/Skills • Ability to add, subtract, multiply and divide accurately and quickly (may use calculator)., • Must be able to make correct monetary change., • Verbal, writing, and telephone skills to take and process orders., • Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed., • Ability to enter orders using a computer keyboard or touch screen. WORK CONDITIONS • Exposure to:, • Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks., • In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas., • Sudden changes in temperature in work area and while outside., • Fumes from food odors., • Exposure to cornmeal dust., • Cramped quarters including walk-in cooler., • Hot surfaces/tools from oven up to 500 degrees or higher., • Sharp edges and moving mechanical parts. SENSING • Talking and hearing on telephone., • Near and mid-range vision for most in-store tasks., • Depth perception., • Ability to differentiate between hot and cold surfaces. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions Qualifications Drivers License Additional Information PHYSICAL REQUIREMENTS including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking • For short distances for short durations., • Surfaces include ceramic tile bricks with linoleum in some food process areas. Height of work surfaces is between 36 and 48. Sitting Paperwork is normally completed in an office at a desk or table. Lifting • Bulk product deliveries are made twice a week or more and are unloading by the team member using a hand truck., • Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'., • Cases are usually lifted from floor and stacked onto shelves up to 72 high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried front he workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Stooping/Bending • Forward bending at the waist is necessary at the pizza assembly station., • Toe room is present, but workers are unable to flex their knees while standing at this station., • Duration of this position is approximately 30-45 seconds at one time, repeated continuously during the day., • Reaching is performed continuously; up, down and forward., • Workers reach above 72 occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves., • Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes., • Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Hand tasks • Eye-hand coordination is essential. Use of hands is continuous during the day., • Frequently activities requires use of one or both hands., • Shaping pizza dough requires frequent forceful use of forearms and wrists., • Workers must manipulate a pizza peel when removing pizza from the oven, and when using the rolling cutter., • Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes., • Team Members must be able to grasp cans, the phone, the pizza cutter and pizza peel, and pizza boxes., • Machines, Tools, Equipment, Work Aids, • Team members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel.

Job DescriptionWelcome to John S. Parker, where passion meets purpose, and every day is an opportunity to make a difference. From the moment you step into our world, you'll feel the warmth of our family-like atmosphere and the pride that comes with being part of something truly special. For decades, we've been at the forefront of delivering exceptional service and exceeding customer expectations, with our unwavering commitment to 100% customer satisfaction driving everything we do. Our legacy of excellence is not just a badge of honor – it's a promise we make to each other and to our customers. We're currently seeking skilled Plumbers to join our tight-knit family. As a Plumber on our team, you'll have the opportunity to showcase your expertise, tackle exciting projects, and make a real difference in the lives of our customers. From installing new plumbing systems to diagnosing and fixing issues and everything in between, you'll be at the forefront of delivering top-notch plumbing services that our customers can rely on. As a Service Plumber at JSP, you will play a pivotal role in our mission to provide unparalleled plumbing solutions that prioritize the well-being and satisfaction of our customers. Your technical expertise, dedication to excellence, and customer-centric approach will contribute to our commitment to delivering exceptional residential plumbing services. As a JSP Plumber your responsibilities will include:Diagnose common and diverse plumbing emergencies efficiently and accurately and perform plumbing servicesWater Heater replacement and repairFixture Replacement (Faucets, Tubs, and Toilet)Represent JSP in a professional manner with customers, vendors, staff, and the general publicRegularly communicate with Plumbing CoordinatorProperly select invoice tasks, complete all necessary forms, complete invoice summary, and debrief call with Plumbing CoordinatorRecommend memberships, repairs, upgrades, and replacements when it is in the best interest of the customerCollect payment for services rendered at time of serviceInput or updating all customer equipment data into CRMUtilize all pertinent marketing materials (stickers, tags, handouts, forms, etc.)Ensure your truck stock is replenished and your truck bin is emptyConfirm time sheets on tabletClean vehicle (inside and out)Attend Team meetingsAttend company provided training classesStay up to date on all company sales promotionsConduct a vehicle inspectionInventory truck stock Plumber Success Metrics:Customer Satisfaction (this always comes first!): Provide clear explanations and educate customers about their plumbing systems, offering preventive maintenance tips and energy-saving recommendations. Maintain customer satisfaction rate through post-service surveys and feedback. Strive to exceed customer expectations and resolve any concerns promptly.Continual Improvement: Actively participate in performance reviews, self-assessments and trainings. Identify areas for personal improvement and set development goals to enhance overall job performance.First-Time Fix Rate: Achieve a best-in-class first-time fix rate by accurately diagnosing issues, arriving fully prepared with necessary tools and parts, and effectively completing repairs during the initial service call.Response Time: Respond to service requests within JSP's defined time frame. Timely response ensures customer comfort and builds trust.Service Revenue Generation: Diagnose and troubleshoot plumbing issues, recommending appropriate solutions and discussing options with customers. Consistently meet or exceed monthly service revenue targets, contributing to the company's financial growth and success. Identify opportunities for upselling and cross-selling additional services, products, or maintenance plans to customers during service visits.Service Agreement Enrollment: Successfully enroll customers in JSP's service agreements, promoting long-term customer relationships and recurring revenue.Productivity and Utilization: Maintain a high level of productivity by efficiently managing work orders, minimizing downtime, and maximizing billable hours.Technical Excellence: Diagnose common and diverse plumbing emergencies efficiently and accurately and perform plumbing services. Demonstrate continuous improvement in technical skills and knowledge through training, certifications, and staying updated on industry best practices.Inventory Management: Keep track of service vehicle inventory and parts stock, ensuring accuracy and minimizing unnecessary expenses due to missing or overstocked items.Safety Adherence: Maintain a perfect safety record by following all safety protocols and guidelines. Ensure zero safety incidents or accidents within the performance period.Documentation Accuracy: Maintain accurate and up-to-date records of service calls, work performed, and parts used in the Service Titan platform.Team Collaboration: Collaborate effectively with team members, sharing knowledge and assisting colleagues as needed. Strive to maintain a positive team dynamic and contribute to a supportive work environment.Professionalism and Communication: Uphold professional communication and appearance at all times when interacting with customers to ensure a five-star customer service experience.Attendance and Punctuality: Maintain a consistent record of punctuality and attendance, arriving at scheduled appointments on time and adhering to the assigned work schedule.Additional duties as assignedIf you're ready to take the next step in your career and become part of a team that values excellence, integrity, and camaraderie, then John S. Parker is the place for you. Apply today! Job Type: Full-timePay: $20.00 - $40.00 per hourExpected hours: No less than 40 per weekBenefits: 401(k)401(k) matchingCompany truckDental insuranceEmployee assistance programFuel cardHealth insuranceLife insurancePaid time offParental leaveTools providedVision insurance Schedule: 8 hour shiftMonday to FridayOn callOvertimeWeekends as needed Supplemental Pay: Bonus opportunitiesPerformance bonus Experience: residential service plumbing: 4 years (Required) License/Certification: Journeyman Plumbers license (Preferred) Ability to Relocate: Kingston, NY: Relocate before starting work (Required) Work Location: On the road We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Description: Parts Advisor Parts Counter Person Our Dealerships seeks a full time, motivated, Parts Counter Person to enhance our service team! - Do you thrive in a fast-paced environment where you have unlimited career potential? - Are you an enthusiastic individual who wants to work for a mission driven company? - Do you have a desire to Succeed! Then our Company is the right fit for you! We are seeking a Parts Advisor to join our professional team. Parts Advisor Duties Include but are not limited to: Order, receive, and bill all parts Maintain proper storage of parts Stock shelves Assist retail customers and technicians, including answering phones Assist with parts inventory management through bin counts and record keeping Pick-up and delivery of parts Keep department and work area orderly, neat, and clean Maintain a superior level of customer service Other duties as directed by management Job Requirement:Automotive Parts Counter Qualifications: Must be a customer-oriented, self-motivated team player One to two years of prior automotive parts experience is required, either from a retail parts outlet or a dealership setting. Must be computer literate High School Diploma or GED required Must be available to work a flexible schedule that will include some evenings and Saturdays Must have a valid driver's license and few to no points on driving record. Benefits Include: Our team members enjoy a positive working environment with opportunities for professional growth through training and advancement from within the organization. Our team members also enjoy a comprehensive benefits program including: Medical, Employee discounts on vehicle purchases, parts and service Paid-time-off Comprehensive employee recognition programs. Continued training through the manufacturer. Opportunities for career advancement. When you join our organization, you'll enjoy comprehensive training, competitive compensation, and unparalleled benefits. Simply put, you'll experience the best that a career in the automotive industry has to offer. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this work. This is not an exhaustive list of all duties and responsibilities. We reserve the right to amend and change responsibilities to meet business and organizational needs as necessary. We are an Equal Opportunity Employer and a drug free workplace. We Would Love To Talk With You! Apply By Clicking The 'Apply Now' Button

Pick, stage and safely deliver parts to pro customers. Engage with walk-in customers to understand their needs and recommend appropriate parts or services. Ability to locate and stock parts Safety knowledge and skills.

Job Category: Parts, Driver, Truck.

Communicate with customers on a daily basis for parts received, and problem parts orders. Enter parts received and orders filled in computer as required by parts room policy. Receive and put away stock parts orders upon arrival.