Parts jobs in Paterson, New JerseyCreate job alerts

Overview: $35-$50 dollars an hour, depending on experience. The Heavy Equipment Technician (Yellow Iron) reports to the Maintenance Supervisor. The Heavy Equipment Technician is personally responsible for performing complex preventative maintenance tasks, and troubleshoots and repairs a wide variety of operational equipment (Trucks and Yellow Iron). • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Repairs as needed equipment (including, but not limited to, bulldozers, skid stears, front-end loaders, yards trucks, tractors, forklifts, and company vehicles)., • Diagnoses and repairs differentials, hydraulic systems, motors, transmissions, drives, air conditioning systems, and electrical systems., • Performs tasks per preventative maintenance checklist., • Completes records such as work orders, card files, P.M. checklists, and oil samples. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Additional Responsibilities • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work., • Must be able to lift 50 lbs, • Performs other duties as assigned Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware. Assist with all problems via phone, email, remote support, site visits, or along the driver’s route. They are responsible for the safe and productive operation of the fleet assets through the efficient performance of the department’s daily activities. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Install the Routeware tablet, and interface all components with the systems on the vehicles, including the in-cab video cameras, Samsara Cameras, and radios., • Maintain a high degree of customer service for all support inquiries and adhere to all service management principles, • Take ownership of user problems and be proactive when dealing with user issues, • Skill to disassemble vehicle interiors without damaging the vehicle or the interior components or where to locate information if disassembly procedure is unknown or not evident, • Identify component failures quickly, and replace as necessary, • Properly choosing and running wires, cables, and harness assemblies throughout the vehicle (including into the engine compartment, trunk/hatch and doors) with a competency to execute safe and serviceable methods in observing current capacity, weather proofing, passage of wire through metal, wiring alongside existing vehicle wiring, and where wiring passes near any moving parts, • Knowledge of various commercially available installation accessories such as wiring harnesses, high current power/ground wiring, circuit protection devices, etc., • General knowledge and familiarity of the appropriate application of various fasteners for equipment mounting and those encountered during removal interior panels with regard to the original integrity of the vehicle and subsequent installation, • Install Bluetooth hands-free cellular devices or modules, or wireless audio streaming devices or modules with driver safety as a priority, and in a way that maintains standard vehicle operation and safety features. Hands-free devices should be installed in compliance with all local and Federal laws, as well as in compliance with CEA recommended practices, • Approach all encounters with employees, customers and vendors in a friendly, service-oriented manner., • Always maintain appropriate confidentiality of all verbal and/or documented information., • Other projects and tasks as assigned. III. Responsibilities • Fluency in English, Spanish is a plus, • Applicants must pass drug test, • Valid driver’s license and a clean driving record is strongly preferred, • Travel in company vehicle to all locations in New Jersey, New York State, New York City, Pennsylvania, and Ohio as needed. Overnight stay(s) could required (Rare), • Three years (3) professional experience is preferred., • Training at an installation related school or program is a plus, • Should have a strong knowledge of PC’s, USB peripherals, Bluetooth, Serial (RS-232), Cellular Data, etc. Education and Experience: High School with 3+ years of related experience. Certificates, Licenses, Registrations or Other Requirements: None required. Other Knowledge, Skills or Abilities Required • Self-Starter with strong communication skills. Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;, • Required to exert physical effort in handling objects less than 30 pounds rarely;, • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often; Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $25.00/Hr.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada. Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Delivery Driver and Installation Technician This is no desk job. As an Appliance Delivery Driver and Installation Technician your days will be active, delivering and installing commercial laundry and/or air vending equipment to a variety of places around town. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life. Installation Technicians’ work is typically Monday through Friday. A Day in the Life of an Installation Technician: • Deliver and Install laundry or air equipment to customer's homes and client locations, • Deliver and Install ancillary technology (card readers, digital enhancements), • Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machines, • Prepare equipment for delivery (assemble required parts prior to loading on trucks), • Instruct customers and/or clients how to operate equipment in a safe and effective manner, • Staying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks:, • Work Life Balance!, • Medical, Dental, and Vision insurance, • 401k, • Vacation, Sick Time & Holiday Pay What we’re looking for: • High School diploma or equivalent, • Valid Driver's License, • Must be 21 years of age or older, • Basic Plumbing and Electrical knowledge, • Ability to pass pre-employment screening, • DOT Certification is a plus!, • 1 year of job-related experience in the areas of delivery and installation (preferred) training is provided, • Mechanical & Maintenance Experience/Knowledge, • Experience driving box trucks, • Ability to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related), • Knowledge with computers and smart phone technology, • Troubleshooting, • Route Driving Experience a plus!, • Customer Service CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, veteran or other protected status. CSC Service Works will comply with local and state laws regarding minimum wages, including requirements specific to cities, counties, and municipalities.

Trustaff is seeking a travel nurse RN ED - Emergency Department for a travel nursing job in Hackensack, New Jersey. Job Description & Requirements • Specialty: ED - Emergency Department, • Discipline: RN, • Start Date: 10/06/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights Trustaff Job ID #921520. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Emergency Room About Trustaff Our nurse-first attitude has set us apart from other travel nursing agencies When you join the Trustaff family, you’re more than just a body filling a role—you're a vibrant individual with dreams and aspirations. As one of the nation's leading travel nursing companies, your recruiter will work with you one-on-one to guide your career and help you achieve your goals. • You decide when and where you want to work, • Enjoy industry-leading pay, benefits, and bonuses, • Experience new people and places, • Grow your clinical skills and expand your experience Travel nursing lets you take your professional career to the next level while maintaining your flexibility and freedom. At Trustaff, we put you first, so you never have to compromise your work or pay. We are proud to have one of the highest nurse retention rates in the country. Some of the other reasons people choose us include: • Priority access to thousands of travel nursing jobs, • Industry-leading pay, • Guaranteed weekly hours, • Experienced recruiters, • Comprehensive benefits, including medical, dental, and vision, • 401k with employer match, • Assistance with travel, compliance, and housing, • Great bonuses for completions, referring friends, and more Benefits • Weekly pay, • Guaranteed Hours, • Wellness and fitness programs, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits

Meda Health is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Hackensack, New Jersey. Job Description & Requirements • Specialty: Cardiac Cath Lab, • Discipline: RN, • Start Date: 09/22/2025, • Duration: 49 weeks, • 36 hours per week, • Shift: 12 hours, days Competitive and Transparent Pay We value your expertise and respect your dedication — and our goal is to compensate you more than fairly for them. We don’t want you to scramble to figure out your coverage, especially when you’re already feeling under the weather. At Meda Health, your coverage starts when you do. You’re covered, period. Our employees get the following benefits right off the bat: Health Vision Dental Life insurance Meda Health Job ID #17009012. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN:Cath Lab,07:00:00-19:00:00 About Meda Health Our mission is to bring positive change in communities by connecting dedicated and skilled healthcare professionals to facilities in different parts of the country. At Meda Health, we believe in the transformative power of mutual respect. In an industry where it’s easy to be treated as a list of credentials, we respect our healthcare professionals’ substantial contributions to the industry and the communities they serve. We are dedicated to helping our employees work toward achieving their dreams in a way that builds a better world for us all.

Job Description Position overview: The Welder Combination is responsible for welding pressure vessels and structural steels by assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape, following standard welding procedures and techniques to optimize Flux Cored Arc, Stick, MIG, TIG, and plasma welding processes on steel, stainless steel, aluminum, and nickel materials. Responsibilities: · Weld materials for pressure vessels and structural steels products using the correct materials to join the metals together. Pressure vessel welding must meet all applicable ASME and TEMA specifications and pass X-Ray, die penetrant and visual inspections. · Weld MIG, TIG, and stick pressure vessels and structural steels · Measure and cut materials to specifications. · Read and understand blue prints according to weld specifications and blueprints prior to starting a project. · Review engineering change orders (ECO’s) and implement desired changes. · Source the materials to be used in the project. · Use quality assurance instruments. · Check finished work to make sure that it falls within the tolerances marked on the blueprints. · Follow all standardized processes, including safety policies and PPE requirements. · Ensure equipment is maintained and quality standards are met with all products. · Adhere to 5S standards daily and participate in Kaizen events. Qualifications: · Vocational School or Technical Training required. Welding Certificate preferred. · Ability to pass ASME coupon tests and obtain ASME Certified Combination Welder · 1 year minimum MIG, TIG, stick welding experience in manufacturing environment or combo of education/training and work experience. · Ability to handle light and average weight parts. · English comprehension is a must. · Good verbal and written communication skills. · Good mechanical aptitude and ability to use hand and power tools. · General understanding of mechanical blueprints and highly sophisticated equipment. · Ability to listen and learn from instructions. · Positive attitude to support company policies and ability to participate in the department's training programs and all 5S initiatives. · Must be flexible and able to adapt to changing responsibilities. · Work overtime as needed when business demands require. · Ability to lift up to 50 lbs.

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. • Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components., • Performs finished good inspections., • Performs start-up and in process inspections., • Monitors specific areas of production as directed by the Quality Control Supervisor., • Makes measurements and records data as per inspection forms or job cards., • Performs testing and records data for statistical process control (SPC) during manufacturing, (when required)., • Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern., • Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern., • Performs computer set up for label printing programs on cutting lines., • Assists Engineering as needed for experimental testing., • Enters finished goods inspection data into BMS as appropriate., • Any other duties as assigned by supervisor.Requirements:, • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to handle numbers required., • Strong interpersonal skills., • Ability to use micrometer, computers, testing equipment and electronic balance is essential., • Experience using Excel is preferred., • Ability to speak, read, and write in English. Education & Experience • High school diploma or equivalent. Working Conditions • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles., • The noise level in the work environment is usually moderate. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job DescriptionDescription: Company Description: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: • Determine inspection status of aircraft in for scheduled inspection, as assigned., • Audit of inspection and maintenance work packages generated by the repair station, • during the performance of maintenance, • and repair., • Work with production personnel, Team Leaders, Lead Technicians and Technicians to, • ensure accurate and complete, • documentation of work performed in company work order packages., • Generation of maintenance record entries for aircraft, engines, propellers, and, • accessories maintained by the repair station in, • accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes, • completion of FAA forms 337 and, • 8130-3 as required., • Assist in surveillance of the repair station facilities and procedures and report results to the, • Chief Inspector., • Assist the Quality Assurance Manager and Chief Inspector in the development of, • improved methods and procedures for the, • performance of quality assurance functions., • Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the, • technical publication libraries throughout, • the repair station., • Assist the Quality Assurance Manager and Chief Inspector in the tracking and, • calibration of inspection and test equipment used, • by the repair station for the purpose of product acceptance., • The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when, • required. This report will be submitted to theFAA within 96 hours after the malfunction or, • defect has been discovered in accordance with 14 CFR§145.221., • Assist the Quality Assurance Manager and Chief Inspector as necessary in the, • receiving inspection of parts or material, • forwarded to him by the receiving inspector., • 1 Assuring proper documentation of the preliminary inspection, hidden damage, • inspection, and final inspections of all items, • processed as assigned., • Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and, • Operator/Air Carrier manuals., • Maintaining Quality Department work areas in a clean and orderly manner., • Knowledge of inspection techniques and tools within an FAA 145 repair station., • Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145., • High mechanical aptitude., • Ability to read schematics and blueprints., • Be proficient with PC and be familiar with MS office., • Knowledge of quality control., • Ability to interact with a group of coworkers., • Ability to work with complex equipment., • Ability to establish procedures., • Ability to work in a production-oriented environment., • Ability to work under frequent changing priorities., • Ability to select and evaluate priorities., • Ability to read and comprehend documentation written in the English language., • Problem-solving and decision-making skills., • Good written and verbal communication skills., • Self-starter with the ability to multi-task and prioritize workday/projects independently., • The employee must occasionally lift and/or move up to 50 pounds, • Stands at least 75% of each workday., • Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination., • High organizational, time management and logic skills required, • Ability to work at a desk in an office environment for extended periods of time, • Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization., • Minimum of five years of experience in a supervisory position in a maintenance organization., • Minimum of ten years of experience in a Part 145 environment., • Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons., • Previous Director of Maintenance or Chief Inspector experience preferred., • FAA Airframe and Power Plant Certification or license (A&P), • Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements., • Subject to pre-employment and random drug testing., • Competitive pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • Profit Share ProgramRequirements:

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Perform inspection and quality control activities to support the on-time delivery and quality objectives of the manufacturing groups, adhering to the Quality Management System, all applicable government regulations, and customer requirements. Hours 3:15 PM - 11:45 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Perform 1st piece, receiving, and final inspection activities according to the Inspection Plan and utilizing basic and advanced measurement equipment., • Provide accurate and complete documentation adhering to Good Documentation Practices (GDP) as well as review documentation received from others to ensure GDP compliance, informing management of any issues., • Ensure gages used are in good condition, calibrated, and appropriately maintained in the GageTrak database. Assist production associates with the use of GageTrak as needed., • Provide one-on-one inspection technique or inspection equipment training to production associates as needed to improve competency., • Support engineering and management with the root cause analysis of customer rejections and internal quality failures and the implementation of corrective actions as required., • Sustain housekeeping and 5S efforts in the Inspection areas as well as perform preventive maintenance on the measuring equipment, such as the Comparator and CMM, and others., • Support the implementation of any Quality Control team and/or management process improvements and standardization. Education and/or Experience High school diploma or general education degree (GED) and a minimum of 2 years experience and/or training in mechanical and visual inspection preferably within a regulated industry. • PC Navigation and MS Word experience, • Capable of reading and interpreting blueprints, • Experience in using standard measuring tools and equipment (e.g. calipers, micrometers, probes, CMM, Comparator), • Accurate, detail-oriented, and organized, • Good verbal and written communications skills, • Reliable Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR 1CZXjYZecZ

Job DescriptionBenefits: • Paid time off We specialize in the manufacturing of tight tolerance medium to complex aerospace components and assemblies. We are AS9100D. Qualifications • Minimum 2-5 years experience in manufacturing / job-shop environment, • Solid working knowledge with: blue print reading, inspection instruments, tolerancing, GD&T, etc, • Knowledge of Mitutoyu MiStar 555 desired., • The ability to multi-task while accurately performing in-process and final inspections on CNC manufactured parts is a must, • Experience inspecting close tolerance parts (.001 to .0005) using inspections tools such as micrometers, linear height gage, CMM, depth mics, etc, • Perform job responsibilities according to internal process specifications and third-party requirements, • Utilize proper PPE, safety equipment, and follow safety procedures, • Assist support functions in root cause analysis, • Must be able to multi-task and work within deadlines, • Proactively work to improve efficiency and quality of products, • Use manual and automated measuring / testing equipment to assure product quality, • Cross-train with employees as needed based upon knowledge and experience, • Compliantly complete all written and/or electronic labor tracking documentation, • Report problems to appropriate resource and/or Coach, • Keep all shift operators informed on special problems involving operation or set up, • Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues, • Provide feedback to appropriate support functions

MedPro Healthcare Allied Staffing is seeking a travel Interventional Radiology Technologist for a travel job in Westwood, New Jersey. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Interventional Radiology Tech for a contract with one of our top healthcare clients. Requirements • Current License in good standing, • Appropriate specialty certifications/credentials, • Eighteen months of Special Procedures/Interventional experience preferred, ideally in a critical care setting., • Weekly pay and direct deposit, • Full coverage of all credentialing fees, • Private housing or housing allowance, • Group Health insurance for you and your family, • Company-paid life and disability insurance, • Travel reimbursement, • 401(k) matching The primary responsibility of the Interventional Radiology Tech is to provide assistance with patient care in the Interventional Radiology Department through the provision of technical assistance to the IR team. • Perform diagnostic and interventional imaging procedures in a clinical setting., • Operates conventional, fluoroscopic or radiology equipment to obtain images of designated body parts according to physician specifications and/or orders., • Assists the physician with the performance of various diagnostic and interventional procedures, by monitoring, passing instruments and catheters, observing patient response to procedure, maintaining sterile field, interpreting and evaluating diagnostic data to be utilized by the physician., • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines., • Delivers quality, cost effective patient care in a professional manner., • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care. MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Tech, CLT, Cardiac Catheter Lab Technician, Cardiac Catheterization, Cardiovascular Technologist, RCIS, EP Tech, Special Procedures Tech, Interventional Tech, Electrophysiology, Electrophysiology Tech, IR Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000004zuCfEAI. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Imaging: Interventional Radiology Technologist Imaging: Interventional Radiology Technologist. About MedPro Healthcare Allied Staffing No One Cares More for Caregivers Than MedPro. Focus on your patients, we’ll take care of the rest. MedPro Healthcare Staffing is a Joint Commission certified provider of temporary and contract staffing services. Since 1983, we have placed happy nursing and allied travelers in top healthcare facilities nationwide. You deserve a travel experience that’s rewarding and memorable. One that allows you to DREAM big. EXPLORE often. And ACHIEVE greatness. The MedPro Experience® delivers it!\n \n\n • Access to nationwide travel assignments\n, • Weekly pay and direct deposit\n, • Full coverage of all credentialing fees\n, • Private housing or housing allowance\n, • Group Health insurance for you and your family\n, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements\n, • Company-paid life and disability insurance\n, • Travel reimbursement\n, • Access to our Clinical Nurse Liaison Team\n, • 401(k) matching\n, • Unlimited Referral Bonuses starting at $500\n, • Personalized gifts delivered to your door step!\n\n \n Benefits • Weekly pay, • Employee assistance programs, • Referral bonus

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Perform inspection and quality control activities to support the on-time delivery and quality objectives of the manufacturing groups, adhering to the Quality Management System, all applicable government regulations, and customer requirements. Hours 7:00 AM - 3:30 PM ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Perform 1st piece, receiving, and final inspection activities according to the Inspection Plan and utilizing basic and advanced measurement equipment., • Provide accurate and complete documentation adhering to Good Documentation Practices (GDP) as well as review documentation received from others to ensure GDP compliance, informing management of any issues., • Ensure gages used are in good condition, calibrated, and appropriately maintained in the GageTrak database. Assist production associates with the use of GageTrak as needed., • Provide one-on-one inspection technique or inspection equipment training to production associates as needed to improve competency., • Support engineering and management with the root cause analysis of customer rejections and internal quality failures and the implementation of corrective actions as required., • Sustain housekeeping and 5S efforts in the Inspection areas as well as perform preventive maintenance on the measuring equipment, such as the Comparator and CMM, and others., • Support the implementation of any Quality Control team and/or management process improvements and standardization. Education and/or Experience High school diploma or general education degree (GED) and a minimum of 2 years experience and/or training in mechanical and visual inspection preferably within a regulated industry. • PC Navigation and MS Word experience, • Capable of reading and interpreting blueprints, • Experience in using standard measuring tools and equipment (e.g. calipers, micrometers, probes, CMM, Comparator), • Accurate, detail-oriented, and organized, • Good verbal and written communications skills, • Reliable Triangle does not sponsor for employment visa status. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR TmD8yhBvJ4

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: • Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications., • Reads written specifications or receives oral instructions and determines work aids required and inspection procedures., • Measures wire/cable for size, and defects using micrometers and fixed gauges., • Examines wire for defects, such as pits, scratches, and burnt surfaces., • Records test results and informs supervisor when wire varies from specifications., • Respools cables according to customers specification and perform final inspections of spools., • Any other duties as assigned by supervisor.Requirements:, • Six months to one year of work experience is preferred., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Must be capable and willing to share knowledge and train associates., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Field Service Tech - Automated Microplate Assay Sys - Wayne, NJ Field Service Technician Calibration Tech Validation Automated Robotic Multichannel Pipetting & Multiplex Microplate Autoloaders Sampler Readers Immunoassay Bioassay Electrochemiluminescence Detection Tabletop Laboratory Instruments CCD Optics Micropumps Mechatronics Proprietary Software _. SIGNIFICANT INTERNATIONAL TRAVEL Install, repair, maintain, calibrate, clean, and test automated microplate dispensers with 96- to 384-well capability and Automated Biomarker & Cell Signaling Assay Systems. * Install, certify, and validate various microplate dispensers and pipetting systems from Agilent, Beckman Coulter, BioTek, Eppendorf, Gilson, Integra, Matrix, Rainin, Sartorius, Thermo Fisher, and similar, as well as, Automated Biomarker & Cell Signaling Assay Systems: * Cell Sorting * Detection Antibodies Application * Electrochemiluminescent Labeling & Reading * Buffer Reading * Microplate Auto Loaders System Components: * Micro Plates * Plate Electrodes * CCD Camera * Lens Systems * Motion Cotrollers * Bar Code Readers * Sample Stackers * Micropumps and Fluid Controls * Power Supplies * Central Processing Boards & Data Comm Boards * Control Interfaces, CPU and Displays * Schedule and perform preventative as per service contract. * Demonstrate equipment operation to clients. * Assist junior specialists with complex service orders. *** Maintain field parts inventory, testing devices, and tools. Excellent career opportunity comes with an industry competitive compensation package, bonuses, uncapped commissions, full medical benefits, 401(k) retirement plan, car allowance, company laptop, cell phone, generous vacation time, numerous career development opportunities, and more! For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #42588NJ669 when responding. Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: WayneJob State Location: NJJob Country Location: USASalary Range: $100,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Calibration Tech Validation Automated Robotic Multichannel Pipetting & Multiplex Microplate Autoloaders Sampler Readers Immunoassay Bioassay Electrochemiluminescence Detection Tabletop Laboratory Instruments CCD Optics Micropumps Mechatronics Proprietary Software #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #biotechjobs #FieldServiceJobs #LabTechnicianJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

Job Description Are you a skilled CNC Milling Machinist looking for a new opportunity? Join our dynamic team at Emco Industrial Plastics, a leader in plastic manufacturing and machining. We specialize in delivering high-quality custom plastic parts to our clients across various industries. Position Overview As a CNC Milling Machinist, you will program, set up, and operate CNC milling machines to produce precision plastic components. Your expertise will ensure the highest quality standards while meeting production deadlines. Key Responsibilities: • Program, set up, and operate CNC milling machines, • Read and interpret blueprints, engineering drawings, and specifications., • Perform tool changes, adjustments, and setups to meet job requirements., • Monitor machining operations to ensure accuracy and quality., • Conduct inspections using measurement tools such as calipers, micrometers, and gauges., • Proven experience as a CNC Milling Machinist., • Proficiency in G-code programming and CNC software., • Strong understanding of machining processes., • Ability to read and interpret blueprints and technical drawings., • Excellent attention to detail and problem-solving skills., • Competitive pay based on experience., • Comprehensive benefits package, including health, dental, and vision insurance., • Paid time off and holiday pay., • Opportunities for growth and advancement within the company., • A friendly, supportive, and collaborative work environment., • First shift - Monday - Friday 7am - 3:15pmCompany DescriptionLeading distributor and fabricator of plastic sheet, rod and tube (Est. 1983), located in Northern NJ (Essex County) has an immediate opening for a CNC Milling MachinistLeading distributor and fabricator of plastic sheet, rod and tube (Est. 1983), located in Northern NJ (Essex County) has an immediate opening for a CNC Milling Machinist

J.B. Hunt is now hiring CDL-A Owner Operators! \nGross Revenue Projected at $202,000 - Plan Your Own Routes \n\n (Must have their own truck along with a valid CDL-A license and 6 months of driving experience.) \n\n Looking for a new contracting opportunity? J.B. Hunt has owner operator jobs available! Contract with J.B. Hunt Highway Services and gain access to one of the largest freight bases in the country, providing you with the compensation you want and the miles you need to grow your business. \n\n Owner Operator Job Details: \n\n\n\t • Gross revenue opportunities projected at $202,000\n\t, • New and improved load board\n\t, • Plan your own routes\n\t, • Book your own loads\n\t, • Reduced third-party insurance rates\n\t, • 100% fuel surcharge pass-through\n\t, • Diesel fuel card and discounts\n\t, • Class A CDL required\n\t

Job Description JOB SUMMARY Amerlux is looking for a Laser/Turret Operator responsible for setting up tooling and material as specified in the Router, set up machines and then execute the program. If there are any issues with the program they need to be communicated with the Supervisor and able to trouble shoot the issue until resolved. The Machine Operator will be responsible for producing quality part, measuring the part to the print, making any adjustments, and then running the complete work order. Machine Operator should be able to train new employee in machines and able to inspect and check quality of the parts. This candidate should be familiar with performing preventive maintenance on machines and ability to rebuild multi tool stations on the machine and maintain the dyes. Candidates must be able to use and properly read a caliper and protractor. JOB RESPONSIBILITIES • Confirm that production parts meet the engineering drawings, using drawings and measuring equipment as needed., • Accurately inventory and report completed parts and work orders in Oracle., • Maintaining and organizing tolling., • Maintain a neat and organized work area., • High School Diploma or GED equivalent, • 3 + years’ experience setting up and operating laser/turret machines. Amada’s, a plus, • Ability to set-up and operate laser/turret, • The ability to concentrate on a task over a period of time without being distracted, • Knowledge of arithmetic, algebra, geometry and their applications, • Proficient in blueprint reading, • Experience using micrometers, calipers and other measuring tools, • Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture of goods, • Flexible, reliable, self-starting team player with ability to work with little or no supervision.Company DescriptionAmerlux is a global leader in lighting, product innovation, manufacturing, and creative solutions. Our optically superior, energy-efficient lighting products are engineered to benefit supermarket, retail, commercial, hospitality, university, municipal, and utilities customers.Amerlux is a global leader in lighting, product innovation, manufacturing, and creative solutions. Our optically superior, energy-efficient lighting products are engineered to benefit supermarket, retail, commercial, hospitality, university, municipal, and utilities customers.

Job Description Ingenus Pharmaceuticals offers a generous Paid Time Off policy, as well as, 14 paid holidays per year. Medical, Dental and Vision benefits are offered to all associates and are effective on the 1st day of the following month after hire. Enrollment in 401k after 90 days. The Manufacturing Operator/Technician II is responsible for all functions relating to the processing of drug products; consistent with established Current Good Manufacturing Practices (cGMP), customer requirements and in conjunction with all Standard Operating Procedures (SOP). Responsible for the safe and efficient execution of their job duties, while ensuring product compliance to established standards. Major Areas of Responsibility  Execute Batch Record and logbook documentation with clear details and accuracy.  Execute the procedures used to clean pharmaceutical production equipment and facilities.  Operates pharmaceutical production machinery and executes procedures for manufacturing such as dispensing, mixing, coating, encapsulating, granulating, drying, milling, blending, compressing etc.,  Executes total changeovers and cleaning.  Identifies and assists in the corrective actions of processing related issues.  Maintains production reporting for assigned work unit operation.  Performs required in-process product quality checks and document accurately.  Execute procedures to complete tasks in a safe, compliant and efficient manner.  Works in collaboration with others as part of a team.  Assists with on the job training of other production trainees and operators.  May determine methods and procedures on new assignments and may provide assistance to other support personnel.  Effectively communicates issues to supervisor.  Adheres to all cGMPs, compliance/regulatory mandates and quality requirements.  Assists in the identification and implementation of continuous improvement opportunities.  Performs other related duties as assigned to meet departmental and Company objectives. Required Knowledge, Skills and Abilities  Knowledge of Metric and English weighing and measurements systems.  Basic understanding of mechanical machinery and the operating principles of control systems.  Demonstrated mathematical ability in addition, subtraction, multiplication, division, ratios and percentages.  Ability to use a calculator.  Ability to follow both verbal and written instructions including SOP’s and Batch Record documentation.  Accurate and precise in recording data and batch information.  Ability to work in both independent and team environments.  Proficient in reading and writing English to understand work instructions and document results.  Ability to operate pharmaceutical processing equipment.  Ability to meet required standards of cGMPs.  Demonstrated understanding of the unit operations and the ability to assist with on-the-job training of manufacturing trainees and operators. Education and Experience  High school diploma or general education diploma (GED).  Two years’ related experience or equivalent technical training/certification preferred; or a combination of related experience and technical training/certification. Physical Demands The physical demands described here are representative of those that must be met by an individual to successfully perform the essential functions of this job:  Stand, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, and hear without any aids.  Capable of lifting or carrying and walk with a minimum of 30 kg alone without any support or aid and higher weights with support or aid as required.  Capable of moving the machines, filled containers, and other accessories alone or with support or aid as required.  Work different operational shifts from time to time as required.  Weekends / holidays and extended hours as required.  Have clarity of vision at 20 feet or more and 20 inches or less with the ability to judge distance and space relationships, bring object into sharp focus and see up and down or to the right or left while fixed on a point. Must also have the ability to identify and distinguish colors.  Operate trucks and other industrial vehicles to transfer the containers/production equipment.  Manufacturing operator/technician II are expected to operate any industrial machinery such as Forklifts, Hi-Lo, Reach Truck, Hand truck, Pallet Jack, Drum lifter etc. to lift, carry, push, pull or otherwise move objects. Work Environment The work environment characteristics described here are representative of those an individual encounter while performing the essential functions of this job:  Sufficient noise to occasionally cause the individual to shout in order to be heard above the ambient noise level.  Individual is in a proximity to moving mechanical parts, electrical current and exposure to chemicals.  Atmospheric conditions sometimes expose individual to dust, for which protective equipment is available.  Individual may be required to wear respiratory devices that include but are not limited to: Air Purifying Respirators (APR) which include half-face (Dust / Mist Respirator & Half-Face Air Purifying Respirator) and full-face negative pressure respirators  Individual may be required to wear hearing protection under certain conditions  Any employee required to use any type of Air Purifying Respirator must not have facial hair and must be cleanly shaven to assure a proper seal. Ingenus Pharmaceuticals LLC. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Company DescriptionIngenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.Ingenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.

Job Description We are looking for a commercial HVAC service estimator with minimum 5 years of commercial HVAC experience to join our service team. This is a commercial service estimator position; applicants with residential service experience or those seeking a sales\account manager position are not encouraged to apply. Successful applicants must have prior field experience with commercial HVAC services. Responsibilities of this position include: • Review assigned service technician reports for field and diagnostic information, • Identify HVAC parts and materials needed for a service repair, • Collect pricing information for necessary parts and materials from local vendors, • Estimate labor hours needed to make repairs, • Write a scope of work for performing identified repairs, • Use company software systems to prepare quote pricing and issue proposals for customer approval, • Respond to customer questions on repair proposals, • Order materials and parts or select them from inventory for approved proposals, • Check materials and parts for completeness prior to technician dispatch for executing repairs, • Participate in weekly estimator meetings for service quoting, • flexible paid-time-off plan, • 401K plan with matching, • Multiple healthcare plans, including dental, • Vision, Life & Disability insurances, • Offices closed between Christmas and New Years, as well as other holidays, • Great team environment Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job Description PLEASE NOTE, 3RD SHIFT OPPORTUNITY REQUIRES TRAINING ON 1ST AND 2ND SHIFT BEFORE YOU'RE MOVED PERMANENTLY TO 3RD SHIFT*** Company History: Dr. Praeger’s was founded in 1994 with the mission to bring delicious frozen food to everyone. It’s not every day that two heart surgeons get into the food business, but over 20 years ago that’s exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads’ vision and we work every day to make them proud. To learn more visit: ** Electro/Mechanic ** **Company History: ** *Dr. Praeger’s was founded in 1994 with the mission to bring delicious frozen food to everyone. It’s not every day that two heart surgeons get into the food business, but over 20 years ago that’s exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads’ vision and we work every day to make them proud. *To learn more visit: [** **]() **Responsibilities: ** * Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. * Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. * Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. * Determines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. * Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. * Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. * Fabricates repair parts by using machine shop instrumentation and equipment. * Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. * Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. * Provides mechanical maintenance information by answering questions and requests. * Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. * Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. * Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Contributes to team effort by accomplishing related results as needed. * Troubleshoot PLC hardware, and programing. * Working knowledge of control circuits, software knowledge, and relay logic/schematics. * Ability and or working knowledge of High voltage power. * Remove place and or program VFD, HMI, and electrical components as needed. * Maintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. * Clean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. * Regularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements * Min 5 years’ experience * Technical or University degree or on-the-job experience a plus * Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce * Knowledge of packing equipment is a plus * Freezer knowledge a plus * Strong Sense of Safety * Ability to walk, bend, stoop, reach, squat and lift up to 50lbs is required. * Color Vision required. Food safety and quality responsibilities • Ensure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point, • Ensure quality and safety specifications are met, • Demonstrate food safety and quality, SSOP and GMP policies and procedures ** **Disclaimer: ¨NBSP; **Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. *Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. You should be proficient in: • OEM (Original Equipment Manufacturing), • PLC Troubleshooting Skills, • Creating Preventive Maintenance Plans, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Troubleshooting Industrial Automation Equipment, • PLC Programming Experience, • PLC Wiring Experience, • Machine Safety Inspections, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens, Schneider Electric), • Conveyor Systems $35 - $40 / hr

Job DescriptionJob Title: Industrial Refrigeration Mechanic Job Description We are seeking a skilled Industrial Refrigeration Mechanic with a solid grasp of refrigeration principles, including compression, condensation, and evaporation cycles. The ideal candidate will possess an in-depth knowledge of safety procedures and regulations related to refrigeration systems (e.g., PSM/RMP) and demonstrate excellent problem-solving abilities. Proficiency in using diagnostic tools and equipment for troubleshooting and repair is essential. Responsibilities • Troubleshoot, repair, and service all HVAC and industrial refrigeration systems using electrical, mechanical, and refrigeration skills, as well as manuals and technical drawings., • Maintain and practice current knowledge of all EPA and OSHA regulations, including keeping accurate records of refrigerant usage and following EPA refrigerant recovery guidelines., • Maintain critical spare parts inventory for HVAC and industrial refrigeration systems., • Create and perform preventive maintenance procedures for all HVAC equipment, including detailed service instructions with time intervals., • Collaborate with industrial refrigeration vendors on repairs and set up regular scheduled services such as vibration and oil analysis., • Provide emergency unscheduled troubleshooting and repairs of production equipment during the manufacturing process and perform scheduled maintenance repairs of production and facility equipment., • Perform mechanical tasks including mechanical, electrical, and refrigeration plumbing, pressure testing, and regular leak checks on all refrigeration systems., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Ensure that equipment is running at proper speeds to achieve throughput standards and quality., • Perform cleaning operations using detergent baths, degreasing, grit blasting, wire brushing, etc., • Conduct equipment inspections and correct any process or safety deviations., • Write reports as needed, including daily communication reports, sharing information that has occurred on their shift., • Refrigeration principles and HVAC knowledge., • Preventive maintenance expertise., • Proficiency in electrical, mechanical assembly, plumbing, and HVAC-related control systems., • Ability to read and interpret technical manuals, schematics, and blueprints., • Hands-on working knowledge of industrial maintenance, pneumatics, hydraulics, soldering, and fabrication., • High school diploma or GED., • Technical training or certification in refrigeration systems preferred., • Three years of experience servicing/repairing rooftop commercial AC units (10t or greater)., • Three years of experience servicing/repairing industrial refrigeration systems, especially low temperature systems., • Five years of related experience in an industrial manufacturing environment in a maintenance position, preferably in an automated food processing plant. Join a dynamic team where your expertise in industrial refrigeration will be valued and expanded. Enjoy a supportive work environment that prioritizes safety and professional growth. Benefit from a culture that encourages innovation, teamwork, and work-life balance. Work Environment The role offers two openings for the 2nd shift, with hours from Monday-Friday 6pm-4am and Saturday-Thursday 6pm-4am. Flexibility to work non-standard hours, including evenings, weekends, and holidays, is required. The position involves daily exposure to various environmental conditions such as dirt, dust, fumes, odors, poor lighting, noise, vibration, temperature extremes, wetness, and humidity. The work environment includes exposure to physical risks and hazards, including mechanical equipment, mechanical hazards, forklifts, chemical hazards, electrical hazards, fire and explosives hazards, and communicable diseases. The position requires physical activities such as standing, walking around the office, warehouse, and plant, lifting and carrying packages up to 50 pounds, and performing fine dexterity tasks, reaching, kneeling, crawling, and twisting on a daily basis. Job Type & Location This is a Permanent position based out of Carlstadt, New Jersey. Pay and Benefits The pay range for this position is $72000.00 - $93000.00/yr. full health benefits - dental, vision, medical 401k referral bonus attendance bonus - monthly and quarterly holidays, sick pay, pto Workplace Type This is a fully onsite position in Saddle Brook,NJ. Application Deadline This position is anticipated to close on Sep 15, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations Pm0aV54PV9

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC JR. MECHANIC JOB RESPONSIBILITIES & REQUIREMENTS As an HVAC Apprentice you will assist experienced technicians with installing, maintaining, and repairing heating, ventilation, and air conditioning systems for a company that handles service work and site maintenance for national accounts. • Assist in the servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources, • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • A strong willingness to learn and a positive attitude are crucial, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations TC8UopvQWz

Job DescriptionThis job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. SOME ESSENTIAL DUTIES AND RESPONSIBILITIES OF EACH ROLE ARE: ASSEMBLER • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. EXPERIENCE AND QUALIFICATIONS • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed, • Reliable and prompt in attendance, • Productive in fast-paced environments, • Competitive pay wage., • Health, dental, and vision insurance offered., • Company-paid basic life insurance., • 401(K) with matching contribution., • Pet Insurance., • Paid Time Off- vacation, personal, sick, and holidays.

Key Responsibilities: • Operate machine tools such as lathes, milling machines, grinders, and drill presses to produce or repair parts., • Read and interpret technical drawings, blueprints, and schematics to understand specifications for parts and equipment., • Utilize the work order system (Emaint) to receive maintenance tasks., • Perform routine maintenance on machine tools to ensure proper functioning and accuracy., • Diagnose and troubleshoot issues with machinery and equipment, identifying the root cause of problems., • Fabricate or modify parts using a variety of metals and materials, ensuring they meet required specifications., • Collaborate with Maintenance Mechanics and other team members to support maintenance activities and achieve production goals., • Follow safety protocols and maintain a clean and organized work area to ensure a safe and productive work environment., • Keep accurate records of work performed, including repairs, modifications, and maintenance tasks., • Assist production in Mill Changeovers, tooling changeovers and jaw replacement. Qualifications: • High school diploma or equivalent; technical training or certification in machining is a plus., • Proven experience as a Maintenance Machinist or similar role in an industrial setting., • Proficiency in operating a variety of machine tools, including lathes, milling machines, grinders, and drill presses., • Ability to read and interpret technical drawings, blueprints, and schematics., • Strong knowledge of machining processes and techniques., • Excellent troubleshooting and problem-solving skills., • Attention to detail and a commitment to producing high-quality work., • Ability to work independently and as part of a team., • Basic computer skills for record-keeping and communication purposes.

Job Description SUMMARY: Under the supervision of the Maintenance Manager, the Maintenance Worker communicates with the production staff to support the needs of each department. While keeping up with the preventive maintenance schedule, being able to multitask and prioritize with any unforeseen issues causing disruption to production or a task being requested by the non-production staff. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned. · Performing routine and periodic inspections of equipment using the preventive maintenance program to ensure that equipment is functioning properly. Performing activities on equipment such as mechanical, electrical, welding, or machining maintenance including lubrication, inspection, and replacement parts. · Diagnose, troubleshoot, update, repair malfunctioning, or installation of new plant equipment. · Use hand, electrical, bench, and machine tools in the repair and maintenance of plant machinery and equipment. · Maintain records of plant function readings, equipment history, inventoried parts used for repairs, and the preventive maintenance program records and schedules. · Ensure and adhere to safe work practices and procedures including, but not limited to lockout/tag out, PPE, Respirator, and IIP (Injury, Illness, and prevention). · Experience operating manual forklifts and automatic scissor lifts. · Experience with welding parts is a plus. Being a good team player, punctual, reliable, good communication skills. EDUCATION and/or EXPERIENCE: Minimum of five years related experience or an equivalent combination of education and experience. LANGUAGE SKILLS: Good written and verbal communication skills in English (e.g. Email, Text, MS Office). Bilingual in Spanish a plus. Company Description35+ year NJ Manufacturing that makes decorative granules and coatings for various industries worldwide.35+ year NJ Manufacturing that makes decorative granules and coatings for various industries worldwide.

Job Description SUMMARY: This position is primarily responsible for maintaining and repairing physical structures of buildings, including electrical and plumbing; repairing/replacing appliances; and maintaining grounds by performing the following duties. DUTIES AND RESPONSIBILITIES: • Receives written work orders or verbal instructions from supervisor for completion, • Cuts grass and trims weeds on organization's property., • Digs flower beds and plants flowers., • Constructs decorative flower garden borders from wood., • Cleans internal areas of buildings, including buffing, dusting, sweeping, and mopping., • Maintains the grounds by picking up trash., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Must possess basic knowledge of hand tools., • Paints interior and exterior walls and trim., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Operates snow removal equipment to maintain parking lots and sidewalks., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Repairs or replaces building brick, stone, and concrete., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower., • Assists other departments with moving furniture, appliances and unloading and storing supplies, • If part of on-call rotation, required to respond to all emergency calls onsite within 30 minutes of receiving call., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence clearly and informatively., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Must have competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented., • Able to work in a team environment and take direction., • Able to stand and exert fast-paced mobility for entire shift., • Able to maintain balance, lift, bend, kneel, stoop, and wipe COMPETENCIES: • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce., • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly, • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Responds timely to after hour emergencies when on-call., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Continually required to stand, • Continually required to walk, • Occasionally required to sit, • Continually required to utilize hand and finger dexterity, • Frequently required to climb, balance, • Continually required to bend, stoop, kneel or crawl, • Continually required to talk or hear, • Occasionally required to smell, • Frequently exposed to wet and/or humid conditions (non-weather), • Frequently work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • Frequently exposed to outside weather conditions, • While performing the duties of this job, the noise level in the work environment is usually moderate to loud, • The employee must continually lift and /or move up to 10 pounds; frequently lift and/or move up to 25 pounds; and occasionaly lift and/or move up to 50 pounds and more than 100 pounds, • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus

Job Description Mission The Maintenance Technician ensures the reliability, safety, and efficiency of production equipment and facility systems through proactive and corrective maintenance. This role directly supports NJ Manufacturing Recruitment's commitment to operational excellence by minimizing downtime, maintaining compliance, and fostering a culture of accountability and continuous improvement. Core Competencies • Accountable – Completes assignments fully and ensures equipment is restored to service before transitioning to the next task., • Technically Proficient – Skilled in diagnosing and repairing hydraulic, pneumatic, electrical, and mechanical systems., • Clear Communicator – Accurately documents activities and escalates unresolved issues promptly., • Preventative-Focused – Executes scheduled maintenance with consistency and precision., • Safety-Driven – Adheres to OSHA and company safety standards without exception. Key Responsibilities • Execute preventative maintenance activities (weekly, monthly, quarterly, annual), including filter and oil changes., • Troubleshoot and repair: Plastic and metal injection molding machines; CNC machinery; vacuum furnaces, debinding equipment, and hot runner tooling systems; Small and large glycol chillers; Auxiliary equipment, including granulators, dryers, thermolators, conveyors, and vacuum systems; Hydraulic, pneumatic, and electrical systems., • Maintain and repair facility infrastructure, including HVAC, compressed air, utilities, and lighting., • Manage spare parts inventory: source components, obtain vendor quotes, and coordinate timely procurement., • Document all maintenance work in the Computerized Maintenance Management System(CMMS)., • Communicate and escalate issues effectively to minimize production impact. Performance Metrics • ≥ 95% Preventive Maintenance Adherence, • ≥ 98% Equipment Uptime in Supported Areas, • 100% Accuracy in Work Order Documentation, • Zero Recordable Safety Incidents, • Consistent Attendance and Punctual Shift Coverage Qualifications • Minimum 2 years of industrial maintenance experience in a manufacturing environment., • Demonstrated ability to troubleshoot and repair a wide range of equipment, including injection molding machines, CNC machinery, furnaces, chillers, and auxiliary systems., • Proficiency in diagnosing mechanical, electrical, pneumatic, and hydraulic systems., • Ability to read and interpret technical schematics and diagrams., • Strong adaptability across multiple equipment types and willingness to learn new systems., • Basic computer proficiency, including CMMS, email, and vendor portals., • Ability to lift up to 50 lbs and perform physically demanding tasks. Preferred: Hands-on experience with Arburg, Engel, or Nissei injection molding equipment; CNC machining; vacuum furnaces; chillers; or hot runner tooling systems. Forklift certification and exposure to lean manufacturing or continuous improvement practices are also desirable. Physical Requirements • Ability to stand, walk, bend, and crouch for extended periods., • Manual dexterity for the use of tools and precision components., • Visual acuity for reading schematics, inspecting parts, and troubleshooting., • Willingness to work in a manufacturing environment with exposure to noise, heat, and moving machinery. Work Environment • Active manufacturing floor with injection molding, CNC, vacuum furnaces, and auxiliary systems., • Exposure to industrial noise, variable temperatures, and airborne particulates. What makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.Our company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition.\r\n\r\nWhat makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.

Job Description POSITION SUMMARY: Perform corrective and preventative maintenance as directed to maximize equipment up time and minimize equipment downtime. Respond to requests for maintenance. Troubleshoot and correct equipment problems. Inform maintenance Team Leader when additional resources are required. Complete daily inspections in accordance with company policy. Unsecure and secure the plant as needed. Complete all paperwork required on a daily basis. Performs additional tasks as required to accomplish goals. DUTIES AND RESPONSIBILITIES: • Perform corrective and preventative maintenance., • To ensure the Food Safety and Quality Culture plan is followed according to plan as is directed by the Operation Manager., • Respond to requests for maintenance., • Diagnose mechanic, electrical, or instrumental problems and make necessary repairs. This can include adjustment, parts replacement, lubrication, tear down, rebuilding, and other repairs., • Complete daily inspections in accordance with company policy., • Complete required daily paperwork., • Additional duties as assigned., • Must have personal toolbox & tools. EDUCATION, EXPERIENCE AND SKILLS REQUIRED: • High School Diploma or Equivalent, • Minimum two years’ experience as Maintenance Mechanic in an Industrial environment, • Must be able to troubleshoot, use hand tools, experience with welders is a plus, torches, meters, various hand and power tools, drill press, hand truck, forklift, basic blueprint and schematic reading, basic shop math, and basic understanding of mechanical and electrical systems., • Must be able to work 2nd or 3rd shift including overtime and some weekends. PHYSICAL REQUIREMENTS: • Climbing, Balancing, Stooping, Crouching, Crawling, Standing, Walking, Pulling, Pushing, lifting up to 50 pounds of force occasionally, Fingering, Grasping, Talking, Hearing, and Repetitive Motions. WORK ENVIRONMENT: The worker is subject to both indoor and outdoor environmental conditions. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. The worker is subject to vibration: Exposure to oscillating movements of the extremities or the whole body. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places when needed, exposure to high heat, extreme cold or exposure to chemicals. The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gases or poor ventilation. Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job DescriptionSenior Facilities TechnicianAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Life Sciences, Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Senior Facilities Technician position is responsible for performing and documenting the required maintenance and monitoring of the facility, systems and equipment. The required duties include execution of Preventive and Corrective/General/Emergency maintenance on the facility’s mechanical systems and equipment, installation of new equipment and general plumbing, electrical and carpentry work, operation of the facility’s systems, including HVAC, environmental monitoring and BMS systems, and other duties as assigned. The position is required to perform the listed duties to minimize equipment downtime, support projects, and ensure that the needs of internal and external customers are met. The objective of this position is to ensure the facility is maintained in a state of maximum uptime and reliability, and provide a safe, clean and efficient environment. • Monitor and respond to equipment or facility alarms, • Travel to and support different sites when necessary., • Work with facilities, engineering and operations to ensure schedules are maintained and delays are properly communicated to customer., • Be available to work nights or weekends, on a rotating basis, to service company needs., • Maintain proper stock, parts, tools, and safety equipment., • Take orders from supervisors for maintenance and repair of systems and buildings, • Clear and clean job sites of debris and other hazardous materials and ensure that they are restored to their original states, • Assist mechanics and other technical staff in testing, cleaning and repairing utility systems, • Provide support in repairing potholes and gutters, • Assist office staff in custodial services and grounds keeping activities, • Clean and maintain floor surfaces, ceilings and windows, • Empty trash receptacles and ensure appropriate disposing off of trash, • Clean restrooms and replenish supplies, • Move equipment and furniture around the building, • Assist stock personnel in handling inventory duties along with providing support in receiving, verifying and storing office supplies, • Maintain full knowledge of the environmental monitoring system as required for monitoring equipment and troubleshooting issues as they relate to equipment and the facility Systems., • Perform all assigned PM’s and WO’s on equipment., • Document all work as performed according to cGMP’s and HCATS SOP’s., • Provide ongoing insight to Supervisors where SOP’s and PM Job Plans need to be updated. Assist Supervisors as required in the preparation of change controls or other required documentation., • Maintain cleanliness of the Facility and Maintenance areas., • Maintain 100% training records for all required training., • Provide 24-hour emergency response as required., • Perform any work required to ensure the safety of the facility and staff, including snow/ice removal as required., • Coordinate contractors, ensure contractors are properly trained and the training is documented before any work is performed., • Perform all duties in accordance with all applicable safety regulations., • Monitor overall job environmental, health and safety aspects and understands the risks and liabilities associated with various facilities maintenance and repair activities., • Must be able to recognize hazard conditions, take appropriate work place safety measures and wear appropriate personal protective equipment to suit work environment.REQUIREMENTS, • 3 to 5+ years of experience in Facility Maintenance., • Good analytical skills and attention to detail with ability to read and interpret blueprints, plans, and manuals., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, ensuring job is done correctly the first time., • Experience in a cGMP environment preferred., • Must be able to communicate clearly and effectively, both written and verbally., • Must be able to work independently and in a team environment, • Must train and become gown qualified to enter and work in classified manufacturing areas., • Valid driver’s license and clean driving record, • Must be able to pass drug test(s) as required by company, • This job may require occasional evening and weekend work.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionJob Summary: The Maintenance Mechanic is responsible for maintaining an orderly and secure Maintenance Shop and Facilities, including the internal and external upkeep of our building and surrounding property. The role will ensure the preventative maintenance of our production equipment, fixing equipment malfunctions between scheduled preventative maintenance operations, and for ensuring that sound electrical, plumbing, compressed air, heating, air conditioning, ventilation, and drainage systems are always available and in working order. Principle Responsibilities: • Perform Setup, Change Overs and Preventive Maintenance of various production and packaging equipment.• Perform Lubrication, Cleaning and Inspection of production and packaging equipment, including tooling (punches, dies and dosing discs) for equipment such as tablet presses and capsule fillers.• Ability to interpret blueprints and schematics and basic understanding of electrical circuits and PLCs.• Maintain personal hygienic practices to always guarantee cGMP compliance, especially when transitioning from facilities maintenance projects to production process maintenance work.• Assure to always follow safety regulations.• Follow written, approved, procedures for general housekeeping, cleaning of overhead structures, and the handling and disposal of solid waste and trash to achieve cGMP sanitary compliance within the building.• Ensure preventative maintenance is properly scheduled with Production and Packaging departments in order to meet customer service goals.• Work with Production and packaging departments to help with packaging department during down time in maintenance.• Follow written, approved, cleaning and maintenance procedures exactly to always maintain cGMP sanitary standards within the Production and Packaging Departments.• Maintain and secure tools, parts, and supplies.• Ensure that non-food grade lubricants and chemicals are kept securely and are segregated from food grade supplies.• Participate in monthly sanitation audits with QA Personnel.• Document all work performed and maintain proper documentation and records of projects and work completed.• Act as point of contact for outside contractors/vendors and schedule vendors to come in to perform maintenance, repairs or equipment replacement.• Attend all cGMP training classes. • Perform other duties, as assigned. Additional Requirements: To perform this job successfully, an individual must be able to perform each principal responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education: High school graduate preferred, but not required if proficiency in communication, mathematics, work habits, and attitude is demonstrated during the probationary period. Experience: 2-5 years of hands-on experience in a solid, full scale, manufacturing environment. Experience working in the vitamin or food manufacturing industry is required. Physical Requirements: Work requires ability to lift up to 50 pounds unassisted, or up to 100 pounds with mechanical assistance; standing, walking, bending and/or stooping for periods of five hours or more; moving and examining objects at high and low reach, and reading for periods of three hours or more. Position requires normal visual acuity. Additional Skills and Qualifications: Knowledge of cGMP standards to ensure the maintenance of the cGMP standard of quality. Ability to read and interpret documents such as safety rules, operating and maintenance work instructions, procedure manuals and SDS sheets. Must have the ability to communicate effectively orally and in written form. Must be able to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Must have ability to solve moderately complex problems involving multiple variables in standardized situations. Must have a deliberate and acute sense of documentation of all activities while in the manufacturing environment. Must be familiar with and be able to communicate via e-mail, verbally and in writing. Must be able to communicate effectively in a cross functional team environment to complete work tasks as instructed. Demonstrated attention to detail and thoroughness are critical. Must have sound judgment and decision-making skills. Familiarity with and ability to use computer software including word processors & spreadsheets (Microsoft Word, Excel), and ERP Systems preferred. Certificates/Licenses/Registrations: Forklift certified.

Job Description Location: Totowa, NJ Industry: Office furniture Position: Assembler Pay rate: $18 p/hr Schedule: M-F availability on Saturday. From 7am to 3:30pm Job Description: Puts together wooden parts to make furniture pieces like frames or sections. Blows dust away from places that need glue using an air hose. Spreads glue on the parts using a roller, brush, or squeeze bottle. Taps parts together with a mallet or clamps them until the glue dries. Wipes off extra glue with a rag. Drills holes and uses screws to join parts or make glued joints stronger. Attaches blocks, braces, drawer guides, shelves, panels, or other parts with nails, screws, glue, or staples. Checks the furniture with a square and tape measure to make sure it’s correct. Smooths rough joints with a rasp and sandpaper, and levels chair legs using a special saw. May drill holes and put on hardware like locks, catches, or drawer guides. Tests drawers by sliding them in and out and fixes any that don’t fit well. Might be known by the type of furniture or parts they assemble. May work on a team along a conveyor line. Others: Interpreting blueprints and instructions Using tools Open to working extra and Saturdays whenever needed. Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Automotive Technicians / Mechanics Wanted! Multiple Positions Available! Light Duty – Full Time Established in 1930, is an award-winning dealership serving GMC clients with high quality customer service. We're looking for energetic, experienced professionals to add to the growing team in our world-class Service Department. Family owned and operated for over 90 years. We are a proud GMC franchise in addition to representing Hino, Freightliner & Isuzu commercial trucks. Our dealership is located in Lyndhurst, New Jersey and also has service, parts & financing departments on site. We specialize in commercial trucks and have a large commercial truck parts department that serves New Jersey, New York City and more. Winner of GMC's 2022 GMC Dealer of the Year, Frank’s Truck Center and Frank's GMC offer quality sales, service and parts and has been family owned and operated for over 90 years. We offer a full benefits package including: • Competitive hourly salary – $20-$40 per hour, depending on experience, • Top pay for A-Level Technicians, depending on experience, • Annual union scale salary increases, • Health, Dental, Vision insurances, • 401(k) AND Pension Plan, • Paid Time Off and Sick Time, • Uniform Service and Work Boot allowance, • Paid Training and Growth Opportunities, • Closed on Sundays, • Union Shop, • Tool Allowance, • Weekly pay days Some Job Responsibilities are: • The day-to-day duties include diagnosing and preparing vehicles for repairs, performing repair work with the utmost of skill and accuracy and completing all duties in a timely manner., • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed., • Provide an estimate of time needed for additional repairs, • Execute repairs under warranty to manufacturer specifications, • Opportunities for advancement with factory paid training! Qualifications needed are: • High school diploma or equivalent, • 2-5+ years of Service Technician experience required, • A or B level qualification including Diagnostic, Electrical and Engine Repair a preferred and a PLUS, • ASE Certification preferred and a BIG PLUS, • Technical Training preferred and a PLUS, • GM Training a PLUS, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Ability to learn new technology, repair and service procedures and specifications, • Ability to lift 50-75 lbs. or more with or without assistance, • Ability to work independently and as part of a team, • Basic written and verbal communication skills, • Valid driver's license and clean driving record, • Ability to work in a shop environment that is effected by frequently changing temperatures., • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to continue to learn and keep up with certifications and training We are an equal opportunity employer and drug-free workplace. Frank’s Truck Center prohibits discrimination and harassment in regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis. • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Automotive Technicians (A &B Level) Paramus Chevrolet – VIP Automotive Group Paramus Chevrolet is proud to be part of the VIP Automotive Group of Long Island, known for exceptional leadership, a customer-first culture, and a commitment to professional growth. Join our team and experience a workplace that values continuous training, career advancement, and being part of one of Long Island’s most successful auto groups. At VIP, our mission is simple: create exceptional value and experiences for every customer, every time. We aim to lead in automotive sales and service by empowering our employees to provide memorable, top-tier customer experiences. Why Join Us? At Paramus Chevrolet, you'll enjoy: ✅ A positive, professional work environment ✅ Competitive pay and performance bonuses ✅ State-of-the-art, climate-controlled facilities ✅ Union benefits **, including pension, medical, dental, vacation, sick, and personal time ✅ Paid ASE certification and manufacturer training ✅ Career growth and advancement from within ✅ Annual recognition Gala for top performers Position: Automotive Technician (A, B & C Level and Express) Job Type: Full-Time 5 day work week Pay: $18.94 – $46.97 per hour (based on experience and qualifications Schedule: Monday – Saturday What We Offer: • Competitive, knowledge-based pay, • Weekly production bonuses, • Year-end bonus with recognition at our annual Gala, • Flexible schedules, • Expense-paid tool relocation, • Technicians consistently earning 45+ hours per week, • Union benefits package (pension, health, dental, vacation, and more) ** As an Automotive Technician, you’ll handle routine maintenance, diagnostics, and repairs while ensuring safety and performance standards. Responsibilities include (but are not limited to): ???? Perform work outlined on repair orders efficiently and accurately ???? Diagnose mechanical issues and complete necessary repairs ???? Conduct oil changes, tire rotations, brake replacements, state inspections, and more ???? Complete software updates and key programming ???? Collaborate with parts department to secure needed parts ???? Inspect vehicles for additional safety or service needs ???? Document all work performed on repair orders ???? Maintain cleanliness of customer vehicles and work areas ???? Support and train apprentice technicians ???? Stay up to date on manufacturer bulletins and training Customer-first mindset is a must! Qualifications: ✔ Manufacturer training preferred ✔ Strong product knowledge ✔ Proven diagnostic and repair skills ✔ Must meet essential job duties with or without accommodation Benefits: • Medical & Dental Insurance, • 401(k) Retirement Plan, • Employee Discounts (vehicles, parts, and service), • Paid Time Off (vacation, sick, and personal days), • Supplemental Benefits (disability, life insurance, etc.), • Recognition programs and annual awards, • Career advancement opportunities **Not all VIP Automotive Group dealerships are part of the union. Not all positions are eligible for union benefits.

Job Description Are you looking for an opportunity to join a growing team with a phenomenal career opportunity? If so, East Coast Toyota is for you! We are currently seeking enthusiastic automotive technicians in a growing industry and will invest in the right candidates to help them build the career they desire. At East Coast Toyota, we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. At East Coast Toyota, we believe our employees are our greatest asset. As such, we treat all employees with respect and appreciation for their contributions to the company. We are looking for and value ambitious candidates to support, train, and provide a long-term path for growth and career advancement. We provide certification training and internal training to provide employees with ample opportunities to expand their knowledge and grow their career. Technician Specific Benefits • Air-conditioned shop, • State-of-the-art, brand new facility with air-conditioned and cutting edge technology (collision center only), • Shop equipped with the newest technology and equipment, • Uniforms provided, • Discounts on products and services, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Medical and Dental, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Flexible Work Schedule, • Saturday Lunches, • Discounts on products and services, • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Ability to identify the problem quickly, • Knowledge of automobiles, • Effective analytical and communication skills, • Strong reading, computer, and mathematics skills, • Ability to learn new technology and repair and service procedures and specifications, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED, • Technical degree preferred but not required, • ASE certifications preferred but not required, • Experience is a plus but we will train the right candidate, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Basic computer skills

Job Description Soar With Us! Dassault Falcon Jet proudly provides competitive pay, quality benefits, and programs that support your career advancement and personal development. Our benefits are designed to support you and your family’s health and wellbeing, help you secure a strong financial future, and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! Why Join Us? Impactful Work: Your expertise will directly contribute to the safety and efficiency of our operations. Growth Opportunities: We support your professional development and offer opportunities for advancement. Collaborative Environment: Work with a team of dedicated professionals who are passionate about aviation. Ready to soar with us? Apply now and be a part of our mission to maintain the highest standards in aircraft maintenance! Job Summary: The Supervisor of Spares Cycle Count and Inventory is responsible for the development and implementation of scheduled cycle counts for spare parts located in Teterboro and outside warehouses, which are the responsibility of the Spares Department. Also responsible for auditing documents, transactions and procedures related to the Spares Department inventory. Ultimately, this position will develop and produce management reports highlighting results of cycle counts and other audit procedures Principal Duties/Responsibilities (Essential Functions): Supervision and development of the following: • Supervise two (2) direct reports who perform daily cycle counts and reconciliation of cycle counts., • Prepare schedule of cycle counts to be performed. Audit of inventory records accuracy through scheduled and on demand cycle counts, including review of current cycle count system and development of any changes required to that system. Cycle count responsibility is for Spares inventory in Little Ferry warehouse and other Spares department inventory in outside warehouses., • Report cycle count and other audit findings to Management through monthly reporting., • Communicate with Finance and Spares management related to cycle count differences and internal control problems., • Reconcile outside warehouse inventory on a monthly basis., • Ensures inventory scrapping and write-off procedures are followed., • Communicate with Spares Warehouse management related to inventory control issues found during cycle counts or audits., • Responsible for audit of Spares inventory by outside auditors including annual test counts by auditors., • Coordinate inventory control activities with MIS, Accounting and Spares department., • All other duties assigned by management Minimum Required Qualifications: • College degree (preferred), • Minimum 5 years inventory cycle count/inventory control experience, • Minimum 1-3 years supervisory experience, • Thorough understanding of cycle count procedures and inventory control principles, • Experience with an inventory ERP system, preferably SAP experience, • Good written and verbal skills Additional Required Qualifications: • SAP experience preferred, • Exposure to ISO procedures preferred, • Aviation experience is a plus Working Conditions: Office environment with cubicle in Spares department near warehouse. Some travel required to outside warehouses. Compensation and Benefits The compensation for this position typically falls between $77,000 and $90,000 per year. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Reporting to the General Manager for their specific location and will serve as a key leader within distribution center, responsible for all operational matters related to the warehouse. The Warehouse Manager will assist in establishing operations aligned with company policies and procedures and assemble a core support team to grow and scale operations as needed. The Warehouse Manager will be responsible for all functional areas of the warehouse, including supervisors, line staff, with shared responsibility with other departments for product quality, inspections, and resolution. This is a rapidly transforming company. As such, we are targeting a leader who is operationally focused and has the capacity to execute various initiatives and reach key goals. Specific Responsibilities: • Develop and manage internal customer relationships and external customer service levels within the operation. Collaborate and coordinate with the local GM and Human Resources to secure and sustain strong company culture and business goals., • Manages warehouse KPIs (Key Performance Indicators) and including it in the warehouse team’s performance development plans. Create SMART (Specific, Measurable, Achievable, Relevant and Timely) goals that impact KPIs such as productivity, order fulfillment time, average retention rate, etc., • Recruit, onboard, train and empower warehouse operations leaders and team members. Align organization and define objectives to deliver on key company expectations and metrics., • Ensure the warehouse operates at peak efficiency, with customer satisfaction being the primary goal, by supervising, organizing, directing and training warehouse employees and establishing, monitoring and managing operation goals., • Partner with the Quality department to ensure that products are handled properly to provide accurate and timely delivery to our customers. Identify trends or challenges and troubleshoot within the warehouse operation., • Coach, counsel, and discipline warehouse employees as needed by developing and enforcing policies and procedures., • Conduct meetings with team and attend meetings as needed., • Maintain consistent communication with the General Manager to ensure transparency and effectiveness., • Proactively identify, incubate, and deploy best practices across all warehouse functions. Promote an environment for continuous improvement., • Oversee the environmental health and safety of the warehouse worksites, adhering to all documented processes and procedures. The Warehouse Manager will participate in the creation of documentation i.e., SOP creation and development., • Manager will be able to identify and request warehouse equipment and submit to Director of Warehouse Operations., • Direct responsibility of the safety and cleanliness of the warehouse. Must be able to identify hazards and conduct training and job safety analysis on a yearly basis., • Must be comfortable with technology and have measurable deliverables within the warehouse applications, procedures, dashboards, and KPIs., • Ensures compliance with applicable federal, state, local laws and has thorough knowledge of company policies., • Must be able to lift up to 60 pounds at a time. Qualifications & Professional Attributes • At least four to five years of progressive general warehouse experience including two years of as a team lead or supervisor., • Must have a keen attention to detail and be able to identify areas of opportunity., • Knowledge of best-in-class warehousing and distribution functions, with the ability to set goals to reach that point., • Experience working with diverse workforce; possesses the depth of experience and leadership style to effectively manage an employee base., • Demonstrated ability to utilize innovative strategies to recruit and retain skilled and in-demand talent., • Needs to be able to communicate effectively both verbally and written., • A genuine, approachable, and trustworthy individual who can easily form relationships and partner with employees and quickly establish themselves as a key member of the business leadership team., • An inspirational, authentic leader with strong business acumen. An individual who wants to engage with employees across all levels of the DC and inspire a collaborative atmosphere and culture., • An entrepreneurial, hands-on leader who is not afraid to roll up their sleeves to get things done timely; Someone with the ability to work with and scale a lean team., • Collaborative leader who is open to new ideas and is willing to apply them with curiosity and trial and error. We believe in rewarding great talent. The salary range is $90,000–$115,000, plus awesome benefits!

Be a companion for a senior. Home Instead is looking for caring and compassionate CAREGivers to become a part of our team and join our mission of enhancing the lives of aging adults. Serving all of Bergen County & parts of northern, New Jersey. Home Instead provides a variety of non-medical services that allow seniors to remain in their home and meet the challenges of aging with dignity, care and compassion. Benefits of being a Full Time CAREGiver: • Flexible Schedules and Clients, • Differential Weekday Pay Rates!, • Above-average starting pay, • CAREGiver referral program, • Paid training and continuing education, • Companionship and conversation, • Light housekeeping tasks and meal preparation, • Medication and appointment reminders, • Alzheimer’s Care, • Ability to treat and care for seniors and their property with dignity and respect, • Ability to communicate with clients in a friendly and congenial manner, • Complete a criminal background check, motor vehicle record check, and drug screen, • Possess a valid driver’s license and valid auto insurance (required if driving clients) Job Type: Part-Time or Full-time Apply today and start sharing your heart! Find out more about this fulfilling career opportunity at

IMMEDIATELY NEEDED!!! JOIN NOW!! Home Instead is looking for caring and compassionate 24 hour - Live-Ins to become a part of our team and join our mission of enhancing the lives of aging adults. Serving all of Bergen County & parts of northern, New Jersey. Home Instead provides a variety of non-medical services to help seniors to remain in their home and meet the challenges of aging with dignity, care and compassion. If you have a passion to help and looking to make a difference every day, then Home Instead has an opportunity for you! Benefits of being a Full Time CAREGiver: • Flexible Schedules and Clients, • Differential Weekday Pay Rates!, • Competitive pay depending on experience and availability, • CAREGiver referral program, • Paid training and continuing education, • Companionship and conversation, • Light housekeeping tasks and meal preparation, • Medication and appointment reminders, • Alzheimer’s Care, • Ability to treat and care for seniors and their property with dignity and respect, • Ability to communicate with clients in a friendly and congenial manner, • Complete a criminal background check, motor vehicle record check, and drug screen, • Possess a valid driver’s license and valid auto insurance (required if driving clients) Job Type: Part-Time or Full-time Apply today and start sharing your heart! Find out more about this fulfilling career opportunity at

Company Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: \n • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending.\n, • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities.\n, • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts.\n, • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage.\n, • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc.\n, • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals.\n, • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses.\n, • Manage operator qualifications to ensure production staff is qualified to perform given tasks\n, • Ability to work in a fast-paced, deadline-oriented team environment\n, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance\n, • Excellent team player with a great attitude. Accountabilities\n\n • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes.\n, • Performance Measurement & Performance Evaluation.\n, • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them\n, • First pass yield\n, • Process compliance (welding, bending, brazing, chemical)\n, • Project completion/execution\n, • Aging (units over lead-time)\n\n Qualifications \n • Proven working experience as a manufacturing engineer or in a related field.\n, • Experience in blueprint reading and spec interpretation.\n, • Must be comfortable in a manufacturing environment often fast-paced and loud.\n, • Must be able to stand, lift, walk, bend, and reach during their shift.\n, • Must be comfortable wearing safety glasses.\n, • Work well within a team.\n, • Creative and innovative thinking skills.\n, • Problem-solving skills.\n\n Additional Information Benefits: \n • 401(k)\n, • 401(k) matching\n, • Dental insurance\n, • Employee assistance program\n, • Health insurance\n, • Life insurance\n, • Paid time off\n, • Vision insurance\n\n We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

To succeed as a Delivery Driver, you should be polite, prompt, willing to work as part of the delivery team and committed to providing our customers with an excellent experience. The Delivery Driver will pick up and drop off automotive parts, while adhering to assigned routes and time schedules. Abi

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR gdadFPpwmr

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. This position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$21.00/hr • Job DescriptionMajor Responsibilities, • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionThe incumbent will be responsible for supporting the Computerized System project teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. Will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contributes expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develops and evaluates quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • Bachelor’s Degree in a Scientific or Engineering discipline, • 8 + years of computerized system experience with IT compliance/validation/qualification activities., • 8 + years of experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • 10% travel required., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionSr. Manager Quality Assurance Validation Computerization Systems The incumbent will be responsible for supporting the Computerized System project teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. Will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contributes expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develops and evaluates quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • Bachelor’s Degree in a Scientific or Engineering discipline, • 8 + years of computerized system experience with IT compliance/validation/qualification activities., • 8 + years of experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • 10% travel required., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.