Parts jobs in Elizabeth, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware. Assist with all problems via phone, email, remote support, site visits, or along the driver’s route. They are responsible for the safe and productive operation of the fleet assets through the efficient performance of the department’s daily activities. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Install the Routeware tablet, and interface all components with the systems on the vehicles, including the in-cab video cameras, Samsara Cameras, and radios., • Maintain a high degree of customer service for all support inquiries and adhere to all service management principles, • Take ownership of user problems and be proactive when dealing with user issues, • Skill to disassemble vehicle interiors without damaging the vehicle or the interior components or where to locate information if disassembly procedure is unknown or not evident, • Identify component failures quickly, and replace as necessary, • Properly choosing and running wires, cables, and harness assemblies throughout the vehicle (including into the engine compartment, trunk/hatch and doors) with a competency to execute safe and serviceable methods in observing current capacity, weather proofing, passage of wire through metal, wiring alongside existing vehicle wiring, and where wiring passes near any moving parts, • Knowledge of various commercially available installation accessories such as wiring harnesses, high current power/ground wiring, circuit protection devices, etc., • General knowledge and familiarity of the appropriate application of various fasteners for equipment mounting and those encountered during removal interior panels with regard to the original integrity of the vehicle and subsequent installation, • Install Bluetooth hands-free cellular devices or modules, or wireless audio streaming devices or modules with driver safety as a priority, and in a way that maintains standard vehicle operation and safety features. Hands-free devices should be installed in compliance with all local and Federal laws, as well as in compliance with CEA recommended practices, • Approach all encounters with employees, customers and vendors in a friendly, service-oriented manner., • Always maintain appropriate confidentiality of all verbal and/or documented information., • Other projects and tasks as assigned. III. Responsibilities • Fluency in English, Spanish is a plus, • Applicants must pass drug test, • Valid driver’s license and a clean driving record is strongly preferred, • Travel in company vehicle to all locations in New Jersey, New York State, New York City, Pennsylvania, and Ohio as needed. Overnight stay(s) could required (Rare), • Three years (3) professional experience is preferred., • Training at an installation related school or program is a plus, • Should have a strong knowledge of PC’s, USB peripherals, Bluetooth, Serial (RS-232), Cellular Data, etc. Education and Experience: High School with 3+ years of related experience. Certificates, Licenses, Registrations or Other Requirements: None required. Other Knowledge, Skills or Abilities Required • Self-Starter with strong communication skills. Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;, • Required to exert physical effort in handling objects less than 30 pounds rarely;, • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often; Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Range Minimum: USD $25.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call, and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Student success coach and mentor (entry level, paid, full-time) City Year AmeriCorps Member About City Year City Year, an AmeriCorps program, helps students across schools succeed. Teams of City Year AmeriCorps members provide support to students, classrooms and the whole school, helping to ensure that students in schools receive a high-quality education that prepares them with the skills and mindset to thrive and contribute to their community. What You’ll Do As a City Year AmeriCorps member, your service will focus on coaching and mentoring elementary, middle and/or high school students. You will help these students earn academic success, improve their attendance, and develop positive behaviors at school. You will plan and monitor individual student progress and work with teachers on whole class instruction, breakout spaces and other in-class student assistance. Role and Responsibilities Experience in all these tasks is not necessary. We provide 2-4 weeks of training at the beginning of the year to support you. Plus, you will work with partner teachers and school staff every step of the way. Support academic coaching and interpersonal development for students: · Work with identified students 1:1 and in small groups · Develop literacy and/or math skills varying learning activities by student level, answering student questions and encouraging assignment completion · Create and implement a behavior management system for students · Develop interpersonal skills throughout their day, using proven strategies of learning, practicing, reflection and repetition · Collaborate with teachers and team members to collect, record, analyze and monitor individual student progress, participating in facilitated reviews of student data collected and entered into City Year’s student data system· Create an engaging, safe and healthy classroom space in collaboration with the teacher Support Whole School initiatives to increase engagement with students and families: · Support and/or conduct extended day and virtual programming for students before, during and after school including, but not limited to, academic enrichment and intervention, homework support, recreation and student clubs, service learning, and leadership development · Create, support and/or co-lead events or programs that recognize and appreciate student growth and/or achievement in math, literacy, attendance, and behavior City Year benefits You will receive: · Health, Dental, and Vision Insurance · Curalinc Employee Assistance Program · Talkspace Therapy Program · Free 3-year membership to Happier · Benefit Advocate Center · Bi-weekly living stipend · Workers’ compensation · Relocation support · Benefits specific to City Year location · Career and University partnerships and scholarships · City Year / AmeriCorps Uniform parts AmeriCorps and other federally-issued benefits You will be eligible for: · Segal AmeriCorps Education Award* · Child care benefits paid by AmeriCorps · Loan forbearance and interest accrual payments for qualified student loans · Time accrual toward the U.S. Department of Education’s Public Service Loan Forgiveness Program, (see Reduction of Education Costs) · Income-based Loan Repayment Plan (IBR)Eligibility Requirements City Year AmeriCorps members are as varied as the communities we serve. We’re looking for you if you want to build yourself, give back and are ready to change the world. · Be a U.S. citizen or legal permanent resident (Authorization to work in the U.S. is not sufficient. Those with DACA status unfortunately are not eligible at this time) · Be 17-25 by July 1, 2025 · Have a GED or high school diploma, some college experience, or college degree · Have served no more than three terms in an AmeriCorps state or national program* · Agree to and complete a background check · Be able to begin City Year by July/August 2025 (specific start date varies by location) How to Apply Visit ___ and submit your completed application online. For more information on how to apply, visit: ___. For more information about this role visit our ___

Job Description This position is responsible for the delivery of finished goods to and from customers in a professional and safe manner. Additionally, this position is responsible for picking up Ford cores and returns from the customer and other items that may be assigned. REQUIREMENTS/DUTIES: · Operate and drive a 26ft box truck, or straight truck safely and professionally to transport parts. · Operate a forklift to efficiently transport material and parts and load/unload parts from trucks. · Perform the daily safety checks of equipment. · Properly secure loads for safe transport. · Process all core and warranty returns using the PDA scanner and providing the customer and warehouse with proper receipts and paperwork. · Prepare and package loads. · Interface with customers and other shop personnel in a professional manner. · Other duties as assigned including helping in warehouse operations as needed. This list is not all inclusive and may vary depending upon day to day business operations Required Skills/Qualifications: · Must have a valid driver’s license (Class C). · Must have 2 years’ experience driving 26ft straight trucks with lift gates on the road. · Demonstrated skill in operating straight trucks. · Knowledge of DOT regulations. Additional Required Skills May be Required to Perform the Job Successfully: Coordination, Organization, Planning, Time Management, Reporting Skills, Inventory Control, Documentation Skills, Data Entry Skills, Dependability. Must obtain a valid class C state driver’s license and meet the company's insurability requirements Physical Qualifications: Must be able to lift and move up to 75 pounds. Frequent standing and sitting for long periods at a time. May at times be required to climb, reach above/below shoulder height, may have to bend and twist at waist. We are proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Company DescriptionHeadquartered in Carrollton, Texas, AER Manufacturing and Sales is a world leader in the engine remanufacturing industry for over sixty years. AER Manufacturing and Sales provides the highest quality and service to its customers, offers diverse product lines, provides a strategic distribution network. AER Manufacturing and Sales continually strives to improve our products, ourselves and our processes by embracing innovation, testing new ideas, developing new technologies, enhancing the work processes and achieving greater efficiencies.Headquartered in Carrollton, Texas, AER Manufacturing and Sales is a world leader in the engine remanufacturing industry for over sixty years. AER Manufacturing and Sales provides the highest quality and service to its customers, offers diverse product lines, provides a strategic distribution network. AER Manufacturing and Sales continually strives to improve our products, ourselves and our processes by embracing innovation, testing new ideas, developing new technologies, enhancing the work processes and achieving greater efficiencies.

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. ESSENTIAL FUNCTIONS • Read and Comprehend complicated blueprints, sketches, written and/or verbal specifications., • Proficient in the use of mechanical inspection equipment; including micrometers, gages, go/no gages, optical comparator, CMM and other inspection measuring tools., • Accurately document the results of the inspections and other data., • May be Level I Operator or Level II Inspector in one or more liquid penetrant, ultra-sonic or eddy currents., • Under direct supervision, may assist in the calibrating of gauges., • Moves parts and materials to and from work area., • Must pass required eye tests, and will be subject to the random drug and alcohol testing program., • Follow company policies (Safety, Attendance, etc.), and maintains a clean well-organized work area., • Can easily accept direction and complete tasks in a timely manner with minimal supervision., • Requires a high school diploma or equivalent, advanced technical education preferred., • Inspection experience and working knowledge of measurement instruments required., • Aerospace and or Nuclear industry experience beneficial., • Good written/verbal communication skills and Inter-acts with organizational team members and other departments in a professional manner., • Advanced mechanical aptitude desired. Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. * Team-Focused Culture: Work with a skilled, collaborative group of industry pros. * Career Growth: Opportunities to develop and move up in a growing company. * Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Field Service Technician - Automated Pipetting Systems - Irvington, NJ Field Service Technician Calibration Tech Validation Automated Robotic Multichannel Pipetting & Multiplex Microplate Autoloaders Sampler Readers Immunoassay Bioassay Electrochemiluminescence Detection Tabletop Laboratory Instruments CCD Optics Micropumps Mechatronics Proprietary Software _. SIGNIFICANT INTERNATIONAL TRAVEL Install, set up, troubleshoot, calibrate, tune, repair, and train lab technicians on proper operation of Automated Biomarker & Cell Signaling Assay Systems. Automated Biomarker & Cell Signaling Assay Systems * Cell Sorting * Detection Antibodies Application * Electrochemiluminescent Labeling & Reading * Buffer Reading * Microplate Auto Loaders System Components: * Micro Plates * Plate Electrodes * CCD Camera * Lens Systems * Motion Cotrollers * Bar Code Readers * Sample Stackers * Micropumps and Fluid Controls * Power Supplies * Central Processing Boards & Data Comm Boards * Control Interfaces, CPU and Displays Activities: * Install brand new state-of-the-art automated and auxiliary systems. * Set up, calibrate, tune, and test equipment. * Train customer technicians on operation, cleaning, and routine maintenance. * Inspect and diagnose problems, perform repairs, replace worn parts, and upgrade software. Excellent starting compensation to $140,000 with full medical, dental, vision and prescription insurance plans as well as company paid life insurance. Generous time off for vacation, holidays, personal and sick days. Tuition reimbursement for continued education and paid training provided. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #42588NJ698 when responding. Education Requirements: Bachelor DegreeMinimum Experience Requirements: 2-5 yearsJob City Location: IrvingtonJob State Location: NJJob Country Location: USASalary Range: $100,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Technician Calibration Tech Validation Automated Robotic Multichannel Pipetting & Multiplex Microplate Autoloaders Sampler Readers Immunoassay Bioassay Electrochemiluminescence Detection Tabletop Laboratory Instruments CCD Optics Micropumps Mechatronics Proprietary Software #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #biotechjobs #FieldServiceJobs #LabTechnicianJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

A global food distribution company in the Linden, NJ area is looking for a Chinese / English Bilingual Account Representative. This is a full-time, direct hire position. Chinese / English Bilingual Account Representative Responsibilities Include: Maintain relationship with existing clients and increase sales activities by acquiring new clients Coordinate and order international sales activities Collaborate with various internal departments to ensure that they fulfill all customer requests Maintain accurate records such as sales reports, expense reimbursement forms, billing invoices and other documents Communicate and report with / to upper management regarding sales activities Occasional domestic and international business travel as required Creation of sales reports and miscellaneous documentation for upper management Other duties as assigned Chinese / English Bilingual Account Representative Requirements Include: Fluent level of Chinese language and English language. Associate’s degree in Business Administration, Management or Marketing or related field Entry levels are welcome Must have a valid driver’s license Ability to travel locally Strong leadership skills in team environment and skills to bring positive atmosphere to the team Ability to be flexible to work effectively with wide variety of people and to work responsibly and effectively in a multicultural environment Excellent communication (Speaking, Writing, Reading, Listening) and presentation skills Ability to multi-task and perform duties time efficiently Team-worker, Detail-oriented, Responsible, Punctual, Self-motivated Proficient in Microsoft Office suite, especially Excel While performing the duties of this job you may be required to intermittently sit, stand, walk, lift up to 25 pounds, lift in excess of 25 pounds with a lift assist, climb stairs, use hands to handle or feel parts/equipment, reach with hands and arms, stoop, kneel, crouch, bend at the waist, talk and hear. You may also be required to use close vision, distance vision, color vision, depth perception, and peripheral vision Activ8 Recruitment & Solutions / Renaissance Resources Inc. has been a trusted leader in North American recruiting for Japanese businesses for over 25 years. We specialize in connecting top talent with companies in the Automotive, Electronics, Food & Beverage, Logistics, Manufacturing, Oil & Gas, Banking & Finance, and Entertainment industries. Our client-focused approach ensures that we understand your unique needs, whether you’re a company seeking skilled professionals or a candidate looking for the right career opportunity. By working closely with each individual, we provide tailored solutions that drive success. We screen ALL Candidates to verify the validity of each applicant's provided information. Upon submitting your resume, we will contact only those candidates that we deem qualified for our client. If we do not contact you, we do not see the fit for the position. If we are unable to reach you in a reasonable timeframe, you will be eliminated from the pool of potential candidates. We prioritize direct applicants; third-party resumes may not be reviewed.

Job Description Description: Company Summary: Bodor Laser is a professional manufacturer and exporter dedicated to the design, R&D and production of fiber laser machines that are widely used for cutting different metal materials. With 20 service languages, a knowledgeable sales and after-sales team, 24/7 service, and a worldwide market network covering more than 150 countries, Bodor reaches out to customers all over the world and looks forward to all potential partnerships. The company is committed to its responsibilities for the well-being of its staff and society, and aims to gain world recognition with intelligently Made-in-China and change human life with laser technology. With over 3000 global employees, BODOR is continuing to expand business world widely and is looking to hire technical service talents to be part of the technical service team of its U.S. subsidiary, Bodorlaser Inc.. The salary range for this position is broad because we are considering candidates with a wide range of experience levels, and the salary will be vary based on factors like location and industry-specific benchmarks. Summary: To support customers with Bodor Lasers. Responsible for offering technical advice to the customers and after-sales service in the field. Responsibilities: • Serve as the main point of contact for customers, and provide direct support for laser machines through phone, email, chat and on-site visit., • Assist personnel and customers with troubleshooting of the laser machine's mechanical and electrical problems, and take appropriate action to resolve customer issues., • Track technical issues and incoming requests from customers., • Manage schedule and follow up with customers in territory to ensure customer is optimizing the use of the lasers., • Perform mechanical repair on laser machines at customer's location, and ability to determine if the repair will require special resources or parts., • Understand layout drawings and blueprints in the installation of equipment., • Develop and maintain a (replacement) parts list and ensure the parts are in stock by effectively communicating with relevant customers, staff, vendors and manufacturers., • Identify safety issues on the machines., • Provide customer trainings., • Write and compose service reports and expense reports., • Perform failure mode analyses and make upgrade recommendations., • Assist with the final integration and commissioning of complex automation projects as needed., • Assist with heavy mechanical moves, such as loading/unloading of equipment onto trucks as needed., • Regular travel within assigned territories., • Associate degree in mechatronic, automation engineering, mechanical/electrical engineering or equivalent with 2+ years' experience on automated CNC machines., • Recent experience of installing, repairing and diagnosing problems of automated CNC machines., • Familiar with engineering software, such as SolidWorks, AutoCAD, etc., • Able to read and interpret electrical and mechanical drawings and test equipment., • Excellent verbal and written communication skills., • Demonstrated technical writing skills, • Proficiency in Microsoft Word, Excel, and remote communications., • Proficient at working independently and as part of a team in a fast-paced environment., • Self-driven and responsible., • Ability to work under pressure., • Ability to travel as required (local and domestic)., • Bachelor's Degree in mechatronic, automation engineering, or electrical engineering from an accredited university., • 3+ years' related experience on automated CNC machines or fiber laser machines., • Mandarin Chinese reading and speaking ability is a plus., • Our North American headquarters is located at Schaumburg, IL 60173., • Competitive compensation package, • Company paid medical insurance, • Dental and vision insurance at low cost, • Company paid basic life, short- & long-term disability insurance, • 401(k) with employer match, • (20) days of paid time off, and (11) paid holidays per year, • FSA / HSA account, • Birthday gifts, • Holiday bonus, • Employee assistance program Compensation details: 70000-90000 Yearly Salary PI5ec4d6a58001-25405-37911020

Job Description We are looking for a skilled Sheet Metal Mechanic – Press Brake Operator to join our team. In this role, you will be responsible for setting up and operating press brake machines to bend, form, and fabricate sheet metal parts according to specifications. The ideal candidate has a strong attention to detail, a commitment to safety, and prior experience working with sheet metal fabrication in a manufacturing or industrial setting. Key Responsibilities: * Set up and operate press brake machines (manual or CNC) to bend sheet metal parts to required specifications * Interpret blueprints, work orders, and shop drawings to determine material requirements and machine settings * Perform accurate measurements using calipers, gauges, and tape measures to ensure quality and precision * Inspect finished parts for conformance to specifications and make necessary adjustments * Maintain equipment by performing routine maintenance and reporting issues * Follow all company safety policies and procedures, ensuring a clean and organized work area * Collaborate with other team members and departments to meet production goals and deadlines * Handle sheet metal materials safely and efficiently * Perform minor fabrication and assembly work as needed Qualifications: * High school diploma or GED required * 5+ years of experience operating a press brake in a sheet metal or fabrication environment * Ability to read and interpret blueprints and technical drawings * Strong understanding of metal types, thicknesses, bend allowances, and tolerances * Familiarity with CNC press brake programming is a plus * Basic math and measurement skills * Ability to lift up to 50 lbs and stand for long periods of time * Strong attention to detail and commitment to quality Company DescriptionFABRICATION AND MACHINING JOB SHOP FOR OVER 50 YEARSFABRICATION AND MACHINING JOB SHOP FOR OVER 50 YEARS

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Job Description We are urgently hiring for several CNC Press Brake Operators with Amada or TRUMPF machine experience. The CNC Press Brake Operator will set up and operate their CNC Press Brake machine to bend and form sheet metal components for telecommunications equipment. This is a Direct Hire opportunity with company and Union benefits. CNC Press Brake Responsibilities • Set up CNC Press Brake machine to appropriate tooling, adjusting back gauge, and inputting bending parameters, according to specifications, • Load sheet metal material onto Press Brake and position in place using clamps or fixtures, • Operate Press Brake to bend, shape, and process sheet metal components, • Inspect finished parts for quality and accuracy, • At least 2 years of experience as CNC Press Brake Operator, • Knowledge of Sheet Metal Manufacturing, • Inspect parts with micrometers, calipers, and gauges, • Interpret blueprint readings, technical drawings, and specifications Hours: 3rd Shift overnight Pay: $26.40 – $29.70

J.B. Hunt is now hiring CDL-A Owner Operators! \nGross Revenue Projected at $202,000 - Plan Your Own Routes \n\n (Must have their own truck along with a valid CDL-A license and 6 months of driving experience.) \n\n Looking for a new contracting opportunity? J.B. Hunt has owner operator jobs available! Contract with J.B. Hunt Highway Services and gain access to one of the largest freight bases in the country, providing you with the compensation you want and the miles you need to grow your business. \n\n Owner Operator Job Details: \n\n\n\t • Gross revenue opportunities projected at $202,000\n\t, • New and improved load board\n\t, • Plan your own routes\n\t, • Book your own loads\n\t, • Reduced third-party insurance rates\n\t, • 100% fuel surcharge pass-through\n\t, • Diesel fuel card and discounts\n\t, • Class A CDL required\n\t

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Job description Service Technician Hood Services 24, LLC is a family owned and operated business with a long-standing reputation in the New Jersey area. We are looking for a responsible Service Technician to join our team and perform work at customer locations. Responsibilities: • Perform routine maintenance and repairs on commercial kitchen exhaust fans and Make-Up Air units., • Must not be afraid of heights as most jobs on roof tops of commercial buildings., • Must have experience in electrical - 3 phase motors and single-phase motors, motor controls and contactors., • Diagnose problems with commercial exhaust fan and Make-up Air units to determine necessary repairs., • Repair or replace broken parts or components., • Maintain records of installed equipment and maintenance activities., • Keeps work area organized and clean., • Accurately complete work orders and reports in a timely manner., • Follow all safety policies and procedures. Pay: $30-$40 per hour Company Vehicle Schedule: • 10 hour shift, • 8 hour shift, • Monday to Friday Ability to commute/relocate:

Job DescriptionJoin BLT’s team of dedicated professionals as a residential HVAC Technician. This position performs various hands-on maintenance duties necessary to maintain and enhance the value of our luxury apartment community located in Jersey City, NJ. Duties & Responsibilities of the HVAC Technician: • Perform routine maintenance on HVAC systems in apartments and common areas, • Diagnose and repair HVAC system issues promptly and efficiently, • Performs preventive maintenance and regular community inspections as requested by the Maintenance Manager, • Recommends the repair or replacement of any interior and exterior areas, • Maintain accurate records of work performed and parts used, • Respond to emergency maintenance requests as needed, • Must have 1+ year of HVAC experience, • High school diploma or equivalent is preferred, trade and/or technical school training a plus, • Fire Safety Manager Certification required, or willingness to obtain upon hire, • Computer knowledge with the ability to generate work orders using a property management software system, • Must be able to lift and work with heavy equipment, • EPA, CPO, HVAC and CFC certifications are a plus, • Competitive pay of $20-24/hr, • Medical Insurance, • Dental Insurance, • Vision Plan, • 401k Plan, • Life Insurance, • Paid Vacation, • Paid Sick Leave, • Paid Holidays, • Tuition Reimbursement, • 20% Housing Discount at BLT PropertiesBLT is an equal opportunity employer Powered by JazzHR nwLvUxG9YL

Job Description Responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning (HVAC) systems. They perform emergency repairs and ensure compliance with safety regulations, often collaborating with other specialists. Looking for candidates throughout the state. Key Responsibilities: • Install new systems, parts, and components, including electrical wiring., • Perform scheduled inspections and preventive maintenance on HVAC systems., • Diagnose and repair mechanical and electrical faults, replacing worn or defective parts., • Inspect and test HVAC systems and components to ensure proper functionality., • Troubleshoot and find the source of HVAC system malfunctions., • Recommend maintenance and improvements to enhance system performance., • Keep records of work performed, including repairs and maintenance., • Perform emergency repairs promptly and efficiently when required., • Ensure compliance with appliance and OSHA standards to maintain safety and quality., • Valid, Active New Jersey HVACR license., • Proficient in installing, maintaining, and repairing HVAC systems., • Skilled in installing electrical components and wiring for HVAC systems., • Ability to inspect and test HVAC systems and components., • Strong problem-solving skills to diagnose and repair system malfunctions., • Knowledge of how to replace worn or defective parts in HVAC systems., • Ability to recommend maintenance procedures to optimize system performance., • 30-35/hr, • Health, • Dental, • Vision, • 401k, • Life Insurance Pay: $30.00 - $35.00 per hour Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job Description • Oversee a crew of field service technicians, • Conduct weekly meetings to implement/review service procedures and offer on-going training, • Implement field & office procedures to advance service department, • Identify and provide training opportunities, • Communicate/assist/follow-up with field technicians throughout the day, • Close out jobs directly with technicians while on site, • Ensure proper follow-up for on-going jobs (ordering parts, sending quotes, contacting customers), • Assist dispatcher with scheduling throughout the day, • Ensure all jobs are being completed in a timely manner and within budget, • Conduct project site visits, as needed, • Review and prepare all closed jobs for billing by ensuring all tech notes are detailed and job costs are correct, • Assist with weekend/after-hours emergency service calls, • Assist in building a positive, healthy team cultureCompany DescriptionWe’re a small, family-owned HVAC company with big dreams to be the best HVAC company in New Jersey. We cover a large portion of central and northern NJ, with a large presence in Hudson and Bergen counties. Our scope of business ranges from residential to large commercial buildings, offering service, maintenance and installation.We’re a small, family-owned HVAC company with big dreams to be the best HVAC company in New Jersey. We cover a large portion of central and northern NJ, with a large presence in Hudson and Bergen counties. Our scope of business ranges from residential to large commercial buildings, offering service, maintenance and installation.

Job Description Are we RIGHT for you? The word RIGHT stands for what we VALUE: Respect, Integrity, Growth, Honesty and Teamwork. Why join our team? Middlesex Water Company (NASDAQ:MSEX) has been an industry leader since 1897. We promote professional and personal development in a work environment that is supportive and responsive. We understand the importance of our services and the individuals who uphold our reputation. To learn more, please visit Job Summary: The Utility Service Representative III performs meter service and installation and system maintenance/repairs under the supervision of Foremen, Sub-Foremen, Inventory Control Specialist, and Senior Mechanic as applicable. The successful candidate will be passionate about supporting and driving the Company’s Values, RIGHT: Respect, Integrity, Growth, Honesty and Teamwork. Work Performed: • Perform all of the maintenance and repair functions on the water distribution system including, but not limited to, hand excavation, jack hammering, backfilling, paving, concrete repairs, pipe cutting and fitting; copper cutting, flaring and fitting; valve repair, hydrant repair, valve box and curb box repair; snow shoveling and plowing under the supervision of the jobsite Foreman., • Learn to install or replace meters and remote read systems; troubleshoot and repair remote read systems and wiring; locate, access, clean and operate curb boxes as necessary in conjunction with meter installations, shut offs and other service related work; checks for illegal and/or cross connections and evidence of meter tampering; performs shut offs, meter reading and other related service work as assigned., • Safely operates all tools and equipment and promptly reports all needed repairs., • Maintain company assigned vehicles in a clean and safe condition at all times. Maintain inventory of parts on crew trucks as directed by Foreman., • Learn the limits of the water distribution system and become familiar with reading and understanding the water distribution system maps., • Learn mark out procedures and complete them as assigned by the Director or the Foreman., • Communicate with other employees, customers and the general public in a responsible and courteous manner., • Required to be on-call as scheduled by the Foreman, to work flexible hours when doing shut-offs and to participate in the flushing program., • Perform work on the sewer collection system as needed and as assigned., • High school diploma or equivalent, required., • Ability to work unsupervised and maintain productivity and safety., • Valid NJ driver’s license, required., • Valid Class B Commercial Driver’s License (CDL) or the ability to obtain one within six months after employment., • Availability to work overtime on an emergency and/or call-in basis., • Willingness to work outdoors on a year-round basis., • Excellent attendance record., • Ability to speak, read, write, and understand English, required., • Salary Range: $35,847 – $53,770 annually, based on experience and qualifications., • Total Rewards Package Includes: - Medical, dental, and vision coverage (effective first of the month after hire)., • 401(k) with company match., • Company paid life and disability insurance., • Paid time off and 12 paid holidays., • Ability to hand-dig and perform strenuous labor., • Ability to lift 100 pounds assisted and 50 lbs. unassisted, • Ability to ascend and descend ladders., • Ability to climb into and out of trenches., • Ability to work outdoors in inclement weather., • Willingness to work outdoors on a year round basis. Candidates must be able to pass a drug screen, pre-employment physical, background check, and have a valid driver’s license. This position requires a Commercial Drivers License. Use of marijuana, whether allowed by state law or medical marijuana card, controlled substances, prescribed or otherwise, not allowed by the Federal Motor Carriers Administration of the United States Department of Transportation, disqualifies candidacy. No phone calls please. We thank all applicants in advance for their interest; however, only those applicants who are being considered for the position, or are currently employed by Middlesex Water Company will be contacted. Middlesex Water Company and its' subsidiaries are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. This job posting complies with the New Jersey Pay Transparency Law, effective June 1, 2025, which mandates the disclosure of salary ranges, benefits, and other compensation in job advertisements.

Job Description Equipment Delivery Driver (Mini Crawler Cranes) - Hillside, NJ We are currently looking for equipment delivery driver that have the ability to work as part of a small, fast-moving team. To work with us, you must be able to operate independently, with limited oversight and have the needed communications- and service-based skills to interface with our customers. As a driver, you will be responsible for customer equipment (Mini Crawler Cranes) delivery and pickup, and basic training. In support of those responsibilities, you will need to provide end-customer equipment familiarization and equipment pre- and post-rental inspections. Driver Primary Responsibilities: Customer Support: • Transport rental equipment (mini-crawler cranes and boom trucks) to customer location in a safe, timely manner, • Report to Expediter to schedule customer service deliveries, • Inspect rental equipment with customer and provide training before handover, • Maintain satellite location inventory, parts, and consumables, • Report to supervising Expediter to schedule customer service deliveries and support, • Perform corrective maintenance actions, as required and post rental inspections, • Willingness to drive in New York City and surrounding areas., • Certificate, diploma, degree, or proof of education or applicable experience with a focus in a transport field, • Ability to work independently, • Willingness to learn, • Attention to detail, • Self-motivating personality, • Good communication skills, • Well-spoken when addressing customers and other employees Please email a cover letter and resume to to be considered for an interview. Company DescriptionSmiley Lifting Solutions is the exclusive North American distributor for UNIC Cranes and SPYDERCRANE Mini-Crawlers. With our lineup of Boom Trucks, SPYDERCRANE Mini-Crawlers, MAVLift Mobile Glass Lifts, Marine Cranes, Pick and Carry Cranes and Aerial Lifts, we provide thousands of industries with extremely useful tools.Smiley Lifting Solutions is the exclusive North American distributor for UNIC Cranes and SPYDERCRANE Mini-Crawlers. With our lineup of Boom Trucks, SPYDERCRANE Mini-Crawlers, MAVLift Mobile Glass Lifts, Marine Cranes, Pick and Carry Cranes and Aerial Lifts, we provide thousands of industries with extremely useful tools.

Swan Analytical USA is seeking a Field Service Technician to join our dynamic team. The Field Service Technician will play a crucial role in ensuring the optimal functioning and performance of our analytical instruments at customer sites. As a Swan Field Service Technician, you will be responsible for on-site installation, maintenance, troubleshooting, and repair of our instruments, as well as competitors, providing outstanding technical support to our valued customers. This role will require up to 100% Travel (Mon-Fri only). Key Responsibilities: • Installation and Commissioning:, • Install and commission SWAN analytical instruments at customer locations., • Ensure proper calibration and configuration to meet customer specifications., • Preventive Maintenance:, • Conduct routine preventive maintenance activities to ensure instruments operate at peak performance., • Keep detailed maintenance records and update service documentation., • Technical Support:, • Provide exceptional technical support to customers via phone, email, and on-site visits., • Troubleshoot and diagnose issues with instruments promptly and effectively., • Repair and Upgrades:, • Perform instrument repairs, replacements, and upgrades as required., • Coordinate with the support admin and manager to source and order replacement parts., • Customer Training:, • Train customers on the proper use, maintenance, and calibration of SWAN instruments., • Offer guidance on optimizing instrument performance., • Documentation:, • Maintain accurate service records, equipment logs, and reports., • Ensure timely submission of service reports and required documentation., • Continuous Learning:, • Stay up to date with SWAN's product advancements and industry trends., • Participate in training programs and workshops to enhance technical knowledge.

Job Description Automotive Service Technician – Smythe Volvo Location: Summit, NJ Employment Type: Full-Time Compensation: Competitive Flat Rate + Bonus Opportunities Benefits: Health, Dental, Vision, 401(k), PTO, Paid Training, Uniforms Provided Smythe Volvo, a trusted and established Volvo dealership, is seeking skilled and motivated Automotive Service Technicians to join our service team. This is a great opportunity to work with a premium brand in a modern, well-equipped facility with a team that values precision, integrity, and professional growth. We are hiring for all levels of experience – from seasoned Master Techs to motivated mid-level and entry-level candidates looking to advance their careers with a high-quality dealership. Responsibilities: * Diagnose and perform repairs and maintenance on Volvo and other vehicles * Perform work accurately, efficiently, and in accordance with manufacturer standards * Communicate repair needs clearly with service advisors and team members * Use diagnostic tools and follow detailed repair procedures * Document all work performed and maintain up-to-date training * Maintain a clean, safe, and organized work environment Qualifications: * 2+ years of experience as an automotive technician preferred * Volvo experience or ASE certifications are a plus (but not required) * Strong diagnostic and problem-solving abilities * Ability to work independently and in a team environment * Valid driver’s license and clean driving record * Professional attitude and a desire to grow with a respected brand What We Offer: * Competitive flat-rate pay with productivity bonuses * Paid OEM and ASE certification training * Full benefits package including health, dental, vision, and 401(k) * Paid vacation, holidays, and sick time * Supportive management and strong team culture * State-of-the-art equipment and a steady flow of work Smythe Volvo is committed to excellence in service—for our customers and our technicians. If you're ready to advance your career in a professional environment that supports growth and rewards performance, we encourage you to apply. Company DescriptionAutomotive Sales, Service and PartsAutomotive Sales, Service and Parts

General Manager (Fractional) $100,000 - $120,000/20 hours per week September 2025 Exothermic Molding, one of the pioneers in Reaction Injection Molding (RIM), was founded in 1972 to provide parts to the medical, electronic, and lab instrument market. Since then, the company has expanded into many other applications and markets but remains committed to the RIM Molding process. Exothermic is also expanding capacity within the facility to increase efficiency and handle growth. We are introducing a revolutionary new product expected to significantly increase revenues and profitability. This is a great time to join our team. Reporting directly to the CEO, the General Manager is responsible for identifying and developing high-potential talent within the organization to ensure long-term leadership continuity. This includes serving as a mentor to a designated future successor for the General Manager role, providing guidance, coaching, and exposure to all facets of plant operations. The General Manager will create structured development plans, offer performance feedback, and involve the successor in strategic decision-making to prepare them for eventual transition into the role. In addition, you will assist the management team in developing training plans for each role, and ensuring appropriate staffing levels are maintained; work with supervisors and managers to ensure career growth and development for all manufacturing staff, lead the team in planning and determining appropriate manufacturing methods, procedures, and tooling necessary to complete jobs profitably and correctly and establish, update, and continuously monitor production schedules. This is the perfect position for a motivated person with a good attitude who is looking to mentor others. If you are ready to take on the lead role, you have come to the right place! We offer a competitive salary commensurate with experience, paid holidays/ vacation, and a great benefit package, including medical and a 401k retirement savings plan. Qualified candidates must have a Bachelor’s Degree (or equivalent) in a related field, along with a proven history of understanding manufacturing best practices and the desire to lead. Qualified candidates should send a resume. Our client provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, They comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Aries Clean Technologies builds, owns, and operates sustainable, industrial-scale waste disposal facilities serving municipal biosolids clients. Our technology recovers the energy in biosolids waste while destroying harmful “forever chemicals” such as per- and polyfluoroalkyl substances (PFAS), resulting in greener, healthier communities. Our mission is to lead the way in sustainable waste management by leveraging our proprietary gasification technology to convert biosolids into renewable energy and valuable byproducts. Our purpose is clear: To provide innovative, environmentally friendly solutions that address the challenges of biosolids waste disposal. We aim to create a positive impact on the environment and the communities we serve by reducing pollution, promoting sustainability, enhancing public health, and supporting economic growth. Today, Aries Clean Technologies is poised to make a lasting impact. With our first commercial scale biosolids gasification facility in Linden, NJ, we are on track to open three additional plants within the next four years. Our continued growth and innovation reflect our unwavering commitment to creating a cleaner, healthier future for all. Job Description Aries Clean Technologies has constructed and commissioned an integrated domestic sludge gasification facility at its site in Linden, NJ. The plant consists of four plant unit operating systems, i.e., a sludge drying plant, a fluidized bed gasifier, heat generation and recovery plant and an emission control unit. Aries is seeking to hire an EI&C Technician reporting directly to the Maintenance Manager. The position will be responsible for installing, calibrating, repairing, adjusting, inspecting, and performing preventative maintenance on electrical plant equipment and plant instrumentation and control systems. Tasks are performed in accordance with established policies and procedures under the general supervision of the Maintenance Manager. Position may require occasional travel for training and support of other company projects. Key Responsibilities and Important Duties • Execute plant equipment lock-out, tag-out policy and procedures to the highest level of safety standards., • Troubleshoot, maintain, and repair electrical equipment such as: AC/DC drives and motors, PLC’s, HMI’s, VFD’s, process controllers, hydraulic and pneumatic devices, and plant support equipment., • Install, modify, and upgrade electrical and computer equipment, • Perform cleaning of various plant equipment as required, • Participate in Continuous Improvement projects, • Assist with or conduct Root Cause Analysis of failed equipment., • Act as a point of contact for third-party maintenance performed by contractors ensuring adequate task performance and job closeout., • Assist with the development or modification of job plans for both preventative and corrective maintenance work., • Read and understand job plans, manuals, schematics and P&IDs., • Ensure adequate controls of plant inventors associated with spare parts and plant tools., • Coordinate the stopping and starting of equipment as required for repairs and adjustments, • Ensure plant equipment operates within design parameters while complying with strict HSE rules and regulations as well as company policies and procedures., • Perform record keeping functions such required., • Able to operate typical equipment associated with the operation and maintenance of a process facility, including mobile equipment, power tools, etc., • Contribute to an effective maintenance team by supporting planning and following a maintenance schedule., • Coordinating with other onsite personnel for overall plant health and maintenance support., • Carry out maintenance duties as required to maintain or restore plant operation, adjusting schedules as needed to attain target maintenance schedule metrics., • Contribute to the development and updating of maintenance procedures and training manuals based on plant knowledge and experiences., • Build and maintain positive working relationships with co-workers, LRSA employees and the public using principles of good customer service., • Possess the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts., • Attend and participate in all assigned training and safety meetings., • Maintain tools, machinery, and work areas, keeping them clean and operational. Job Requirements • Minimum high school diploma or GED. Process Plant Technology Degree or Vocational electrical Degree or equivalent preferred., • 5+ years working experience in operating facilities or related industries with one or more of the following processes: solids handling and solids processing, power generation, wastewater treatment, materials drying, gas processing., • Prior troubleshooting and repair experience with electrical systems in an industrial environment., • Ability to work weekends, overtime, or holidays as needed, • Two (2) year technical degree/diploma in a multi-craft technology program., • Bachelor’s degree or higher in mechatronics, industrial electronics, robotics and automation, or engineering, • Advanced troubleshooting and repair experience working with pneumatic, hydraulic, and electrical systems in an industrial environment., • Able to read and comprehend electrical drawings, one-line diagrams, control logic and plant component set-up., • Knowledge of reading and interpreting P&IDs, • Excellent communication skills., • Works well with others and is a team player., • Excellent innovative problem-solving skills, • Ability to recognize and resolve unusual, inefficient or dangerous operating conditions through good maintenance practices., • Knowledge of plant environmental regulations and compliance requirements., • Ability to think holistically and creatively to introduce unique solutions to problems., • Ability to operate aerial lifts, scissor lifts and/or other related equipment required for support of routine maintenance tasks., • Skilled in PLC troubleshooting and repair, • Experience with basic operation of plant equipment (e.g., process pumps, motors, belt drives, gearboxes, valves and compressors). Working Conditions and Personal Attributes • Safety conscious attitude; knowledgeable in appropriate use of personal protective equipment (PPE), • Must be able to function well in a fast-paced environment under demanding deadlines and changing priorities and conditions., • Ability to cover odd shifts and work overtime as required by upset conditions or planned downtime., • Ability to work in an outdoor plant environment and around operating equipment., • Ability to climb equipment ladders to access elevated platforms in a vertical plant., • Comfortable with prolonged periods standing and walking., • Ability to multi-task, maintain flexibility and work independently with minimal supervision., • Capable of lifting objects weighing up to 50 pounds, • Effective written/verbal communication, • Able to stoop, kneel, crouch, or crawl., • Assertive self-starter who takes initiative, is versatile, and possesses a service-oriented mentality, • Self-motivated to accomplish the individual and company goals and objectives, • Required to use personal protective equipment as required by site or regulatory policy and procedure., • Collaborative team member (e.g. ability to contribute as a team member through a positive “can-do” attitude)., • Occasional operation of mobile equipment (aerial lift, scissor lift, etc.) Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. The contents of this description are not intended to be construed as an exhaustive list of all responsibilities, duties, skills required of personnel so classified. It is the policy of this organization to provide equal employment opportunities to all qualified applicants without regard to race, creed, color, national origin, sex, age, disability, marital status, sexual orientation, gender identity, genetic information, citizenship status, religious preference, or veteran status in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

Job Description Commission is to be determined based on performance! ESSCO Truck & Equipment, a leading heavy equipment dealer on Staten Island, is seeking a motivated and customer-focused Parts Counter Associate to join our team. This role is responsible for assisting customers and service technicians with parts identification, ordering, and sales, while maintaining excellent customer service and efficient inventory control. Key Responsibilities * Assist customers (retail, wholesale, and internal service department) in identifying and locating required parts. * Provide accurate parts information, pricing, and availability. * Process parts orders, returns, and exchanges efficiently in person, over the phone, and via email. * Maintain proper inventory control by receiving, stocking, and organizing parts. * Create and update sales orders, invoices, and records in the company system. * Coordinate with the Service Department to ensure timely parts availability for equipment repairs. * Support promotional sales initiatives and upsell parts and accessories when applicable. * Handle vendor communication for special orders and back-ordered parts. * Maintain a clean, organized, and professional parts counter and storage area. * Provide outstanding customer service to build long-term customer relationships. Qualifications & Experience Requirements * High school diploma or equivalent required. * Previous experience in automotive, truck, or heavy equipment parts sales preferred. * Strong knowledge of parts catalog systems and inventory software (CDK or similar systems a plus). * Familiarity with heavy equipment, trucks, or construction industry parts strongly preferred. * Proficiency in Microsoft Office (Word, Excel, Outlook) required. * Excellent communication, organizational, and problem-solving skills. * Ability to multitask in a fast-paced environment. * Strong attention to detail and accuracy. * Team-oriented with a customer-first attitude. * Ability to lift heavy mechanical parts and perform light warehouse duties when needed. Company DescriptionMulti-Faceted Company with great opportunity for growth...!!!Multi-Faceted Company with great opportunity for growth...!!!

Job Description Looking for a GM experienced and trained A level technician to fill positions in a busy shop. We are a single line dealer with a strong customer base. A tech level will include, but not limited to, engine, transmission, and driveline diagnosis and repair. Strong electrical skills a plus. The right candidate will possess good organizational skills along with the ability to get along with co-workers. Pay is negotiable and commensurate upon experience and training. Responsibilities • Receive repair orders from dispatcher and take to stall area., • Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose cause of any malfunction and perform repair., • Communicate with parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Notify service advisor immediately if additional work outlined is not needed or required., • Notify service advisor immediately if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicles when required or refer to the test technician., • Supervise work of any apprentice technicians as assigned., • 5+ years of GM Technician experience is preferred but not required, • A-level qualifications, including Diagnostic, Electrical and Engine Repair, • One week vacation immediately; two weeks vacation after one year, • 35 hour guarantee, • Paid training, • Sign-on Bonus

Job Description We are currently looking for a Laborer to join our facility in Jersey City, NJ. Major Job Responsibilities/Duties • Inspects materials and sorts items or materials into piles or places in bins or barrels according to type, size, condition, coloring, marking, or other characteristics, • Operate safety equipment and use safe work habits, • Operate machinery used in the production process or assist equipment operators, • Load and unload items from machines, conveyor and conveyances, • Moves reusable materials to production department or storage, • Separates metal particles from waste, • Cleaning which includes; sweeping and shoveling residual waste from process, • Removes waste materials from conveyor, • High School diploma or general education degree (GED) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Additional Comments Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. With a promote-from-within philosophy and a variety of programs available to support continuous learning, Balcones Recycling offers the opportunity for a rewarding career. We are committed to the ecologically sound and sustainable use of resources and strive to operate in a manner that minimizes waste and protects the environment. A career with Balcones Recycling provides you with the opportunity to work with an organization whose goal is to be the world’s safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Find Out More… Please visit Balcones Resources - Sustainable Future Through Recycling (balconesrecycling.com) for more information on Balcones Recycling and its commitment to sustainability. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.. Job Type: Full-time Pay: $22.23 per hour Benefits: • Dental insurance, • Health insurance, • Vision insurance, • Paid time off, • Sick Time off, • 401K

🚨 Career Opportunity: Parts & Inventory Manager Location: Bayonne, NJ — Join the Malachy Parts & Service family! Key Opportunity: Why This Role Matters 💲 💲 💲 💲 - Excellent Pay in a growing business and industry TOP Tier benefits, Top Medical 80% Paid, 401K w/4% match, Great PTO packages, bonuses and more, 📩 At Malachy Parts & Service, we don't just service commercial food equipment — we build a community of service professionals. As our Parts & Inventory Manager, you'll be the backbone of our parts operation, ensuring efficiency, accuracy, and consistent service excellence. This is a high-impact, operational leadership role where your work directly fuels technician productivity, customer satisfaction, and business growth. ⚡ What You’ll Do Day-to-Day ⚡ Inventory Strategy & Optimization Develop and run strategies to maintain ideal stock levels—minimizing excess and preventing stockouts. ⚡ Accuracy & Cycle Counts Conduct regular cycle counts and audits to maintain inventory accuracy and reduce discrepancies. ⚡ Receiving, Pricing & Processing Manage receiving via three-way match, oversee labeling and pricing, fulfill parts requests quickly—ensuring techs have what they need when they need it. ⚡ Vendor Relations & Cost Control Negotiate with suppliers to balance cost, quality, and lead time; handle returns or credits when needed. ⚡ Order Management & Fulfillment Create POs, manage special orders, transfers, and ensure timely fulfillment to support field service teams. ⚡ Team Leadership & SOP Development Supervise inventory staff, train team members, enforce SOPs, and drive performance through structure and accountability. ⚡ Process Improvement & Analytics Use data to anticipate needs, improve workflows, optimize inventory investment and drive continuous improvement.

Aries Clean Technologies builds, owns, and operates sustainable, industrial-scale waste disposal facilities serving municipal biosolids clients. Our technology recovers the energy in biosolids waste while destroying harmful “forever chemicals” such as per- and polyfluoroalkyl substances (PFAS), resulting in greener, healthier communities. Our mission is to lead the way in sustainable waste management by leveraging our proprietary gasification technology to convert biosolids into renewable energy and valuable byproducts. Our purpose is clear: To provide innovative, environmentally friendly solutions that address the challenges of biosolids waste disposal. We aim to create a positive impact on the environment and the communities we serve by reducing pollution, promoting sustainability, enhancing public health, and supporting economic growth. Today, Aries Clean Technologies is poised to make a lasting impact. With our first commercial scale biosolids gasification facility in Linden, NJ, we are on track to open three additional plants within the next four years. Our continued growth and innovation reflect our unwavering commitment to creating a cleaner, healthier future for all. Job Description Aries Clean Technologies has constructed and commissioned an integrated domestic biosolids gasification facility at its site in Linden, NJ. The plant consists of four plant unit operating systems, i.e., a biosolids drying plant, a fluidized bed gasifier, heat generation and recovery plant and an emission control unit. Aries is seeking to hire a Maintenance Technician reporting directly to the Maintenance Manager. The position will be responsible for installing, calibrating, repairing, adjusting, inspecting, and performing preventative maintenance on plant equipment. Tasks are performed in accordance with established policies and procedures under the general supervision of the Maintenance Manager. Position may require occasional travel for training and support of other company projects. Key Responsibilities and Important Duties • Execute plant equipment lock-out, tag-out policy and procedures to the highest level of safety standards., • Troubleshoot, maintain, and repair mechanical equipment such as: conveyors, fans, pumps, valves, dampers, hydraulic and pneumatic devices, and plant support equipment., • Install, modify, and upgrade mechanical equipment, • Perform greasing, oil changes and oil sampling., • Perform cleaning of various plant equipment as required., • Participate in Continuous Improvement projects, • Assist with or conduct Root Cause Analysis of failed equipment., • Act as a point of contact for third-party maintenance performed by contractors ensuring adequate task performance and job closeout., • Assist with the development or modification of job plans for both preventative and corrective maintenance work., • Read and understand job plans, manuals, schematics and P&IDs., • Ensure adequate controls of plant inventors associated with spare parts and plant tools., • Coordinate the stopping and starting of equipment as required for repairs and adjustments, • Ensure plant equipment operates within design parameters while complying with strict HSE rules and regulations as well as company policies and procedures., • Perform record keeping functions such required., • Able to operate typical equipment associated with the operation and maintenance of a process facility, including mobile equipment, power tools, etc., • Contribute to an effective maintenance team by supporting planning and following a maintenance schedule., • Coordinating with other onsite personnel for overall plant health and maintenance support., • Perform maintenance duties as required to maintain or restore plant operation, adjusting schedules as needed to attain target maintenance schedule metrics., • Contribute to the development and updating of maintenance procedures and training manuals based on plant knowledge and experiences., • Build and maintain positive working relationships with co-workers, LRSA employees and the public using principles of good customer service., • Possess the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts., • Attend and participate in all assigned training and safety meetings., • Maintain tools, machinery, and work areas, keeping them clean and operational. Job Requirements • Minimum high school diploma or GED. Process Plant Technology Degree or Vocational Maintenance Degree preferred., • 5+ years working experience in operating facilities or related industries with one or more of the following processes: solids handling and solids processing, power generation, wastewater treatment, materials drying, gas processing., • Prior troubleshooting and repair experience with mechanical systems in an industrial environment., • Ability to work weekends, overtime, or holidays as needed., • Knowledge of reading and interpreting P&IDs, • Excellent communication skills., • Works well with others and is a team player., • Excellent innovative problem-solving skills, • Ability to recognize and resolve unusual, inefficient or dangerous operating conditions through good maintenance practices., • Knowledge of plant environmental regulations and compliance requirements., • Ability to think holistically and creatively to introduce unique solutions to problems., • Ability to operate aerial lifts, scissor lifts and/or other related equipment required for support of routine maintenance tasks., • Skilled in rotating equipment troubleshooting and repair, • Experience with basic operation of plant equipment (e.g., process pumps, motors, belt drives, gearboxes, valves and compressors). Working Conditions and Personal Attributes • Safety conscious attitude; knowledgeable in appropriate use of personal protective equipment (PPE), • Must be able to function well in a fast-paced environment under demanding deadlines and changing priorities and conditions., • Ability to cover odd shifts and work overtime as required by upset conditions or planned downtime., • Ability to work in an outdoor plant environment and around operating equipment., • Ability to climb equipment ladders to access elevated platforms in a vertical plant., • Comfortable with prolonged periods standing and walking., • Ability to multi-task, maintain flexibility and work independently with minimal supervision., • Capable of lifting objects weighing up to 50 pounds, • Effective written/verbal communication, • Able to stoop, kneel, crouch, or crawl., • Assertive self-starter who takes initiative, is versatile, and possesses a service-oriented mentality, • Self-motivated to accomplish the individual and company goals and objectives, • Required to use personal protective equipment as required by site or regulatory policy and procedure., • Collaborative team member (e.g. ability to contribute as a team member through a positive “can-do” attitude)., • Occasional operation of mobile equipment (aerial lift, scissor lift, etc.), • Willing to work shift work. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. The contents of this description are not intended to be construed as an exhaustive list of all responsibilities, duties, skills required of personnel so classified. It is the policy of this organization to provide equal employment opportunities to all qualified applicants without regard to race, creed, color, national origin, sex, age, disability, marital status, sexual orientation, gender identity, genetic information, citizenship status, religious preference, or veteran status in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

Job Description We are looking for a talented Class B Auto Mechanic to join our growing company. You will be responsible for inspecting customer vehicles, diagnosing problems with the engine or other systems, perform routine maintenance, and complete necessary repairs. Candidates with more than one year of mechanic experience are preferred, but we are willing to train the right person. We pride ourselves in providing excellent customer service, so you must be friendly and passionate about giving our customers the best repair experience possible. Responsibilities • Examine cars based on customer requests or concerns, • Perform basic maintenance, including changing motor oil, rotating tires, and checking fluid levels, • Repair or replace worn parts and systems, such as spark plugs, wheel bearings, brake pads, fuel systems, and sensors, • Follow checklists to ensure thorough examination of all parts and systems, • Identify mechanical and electrical problems with both manual and computerized diagnostic equipment, • Present estimates to customers with an explanation of why repairs are necessary, • Perform repairs thoroughly and accurately, • High School diploma or equivalent preferred, • Completion of a postsecondary program in automotive service technology a plus, • One week vacation immediately; two weeks vacation after one year, • 35 hours guarantee, • Paid training, • Sign-on Bonus

Continuous Improvement Manager Work Location: Onsite with 25% travel to other locations nationally This role is based in US - Preference in Linden, New Jersey or Lancaster, Texas - USA At FreshRealm, we aspire to be the most optimized fresh meals solutions platform in the world. Fresh meals are our focus, and we are passionate about transforming this rapidly growing category, bringing fresh to everyone, every day, everywhere. FreshRealm develops, sources, commercializes and assembles fresh meals, including meal kits, ready-to-heat and ready-to-cook offerings. We partner with leading direct-to-consumer brands, national grocers, and top convenience, club, and food service companies to deliver the very best meals to their customers. Our customer’s success is our success. If you are a growth-minded leader who thrives in an entrepreneurial environment at a company transforming an industry, FreshRealm is the perfect fit for you. Job Description Our FreshRealm Business Systems (RBS) will be an integral part of the way we run our manufacturing sites & functional areas and serve every customer, every day, everywhere. Under the direction of the Vice President (RBS), this role has a mission to focus on creating, supporting and assisting the improvement efforts tied to the company’s most critical business processes. Primary areas of focus will be the improvement within our manufacturing site, analyzing our processes, diagnosing operational challenges, and implementing process and system changes to drive continuous improvement and breakthrough performance. Our operating model’s goal is to positively impact our results and culture by establishing standards, institutionalizing daily management processes, adopting consistent problem solving methods and learning by doing. As part of the RBS program of Lean Management, the candidate will build an action plan to implement tools, identify opportunities and launch processes at the site level. In addition, this role will develop the kaizen and project funnel prioritizations for the site he/she is responsible for and ultimately is part of the team that defines the lean culture and activities/change management programs to embed in the organization. The candidate will drive the implementation of the RBS including daily management, metrics, and problem solving. He/she will work with the site to address KPI’s and alignment to CVD (core value drivers) implementing lean tools and training programs to enable PSP/action planning. This position will also drive the implementation of a lean certification program. This certification program will provide the path to ensure the application of recognized standards for lean principles and practices, serve as a benchmark for FreshRealm’s achievements, and ensure a common roadmap for continuous improvement and workforce development. Major Duties and Responsibilities • Assist site leadership in the development of an RBS Roadmap (i.e., how to use the RBS tools to drive sustainable improvement into all parts of our business and making it a way of life). Be an integral part of FreshRealm’s team that designs and creates the infrastructure to make the RBS a benchmark in the industry., • Lead, facilitate and co-facilitate targeted, kaizen events, improvement workshops and projects that are tied to our Strategy Deployment (SD) and Key Performance Indicators (KPI) to drive significant sustainable business results across the organization by leveraging Lean tools, people skills, and change management processes. Ensure successful kaizen events by installing and ensuring compliance to the kaizen process (includes; (1) planning of kaizens through a funnel process tied to SD, KPIs, and business needs, (2) kaizen execution and (3) sustainment of kaizens), • Work closely with cross functional teams to proactively identify gaps and systematic opportunity for improvement (OFI) for the assigned plants and define and drive them through to completion as effectively and quickly as possible utilizing lean toolsets., • Partner with all functions at the site to identify and create world class processes throughout the organization and define process capabilities, assess gaps and develop gap closure plans., • Train and lead effective problem solving methods from plant leadership to line associates., • Build and Deliver breakthrough levels of improvement in process capability, reengineer business processes to reduce cost and increase productivity, and attain world-class levels of quality., • Define and implement process improvements on key initiatives that result in significant improvements in service delivery, increasing organizational effectiveness., • Mentor, influence and develop potential lean practitioner candidates through their Kaizen events and projects driving business change, • Engage the plant teams in setting specific goals around Lean initiatives. This includes working with leadership to drive lean daily management in key areas of Safety, Quality, Delivery, Cost and Productivity., • Facilitate, train, and coach team members in the use of the Business System tools (Lean Six Sigma tools)., • Identify and share best practices across the organization; incorporate benchmarks and best practices from other FreshRealm locations., • Partner with Finance to incorporate kaizen and project savings into long-range financial plans and operating budgets. Skills and Requirements • Prior experience with deploying lean methods in operations and functions., • Experience leading and developing training, processes and systems using kaizens, A3 Problem solving, X Matrix, daily management and lean toolsets., • Ability to create, lead, manage, and coordinate multiple kaizens and projects simultaneously, • Ability to work both as a member of a team, a team leader or as a Kaizen event leader, • Lead and participated in developing and managing KPIs preferred., • Very customer focused with a strong ability to influence and communicate effectively at all levels of the organization from senior site management to hourly employees., • Active, aggressive, externally focused and future-oriented, • Independent worker, capable of operating in a fast-moving, ever-changing environment and able to effectively deal with difficult situations., • Possess strong functional experience and commercial business acumen, • Excellent training, consulting and change management skills, • Keen listener, open-minded, and have strong interpersonal skills and the intellectual horsepower to establish deep client relationships all levels, • Quick study who can rapidly adapt to FreshRealm’s culture and gain the confidence of the organization., • Visibly demonstrates a sense of urgency and strong personal ownership to business performance, • Hands-on and detail-oriented but also able to see the big picture., • Great interpersonal skills, ability to build effective relationships, collaborate productively with others and drive teams to successful outcomes. Required Experience / Education • 7+ years of relevant business experience, • Bachelor’s degree, preferably in a related discipline. MBA is a plus., • Manufacturing sector with directly related experience in a business to business environment., • High degree of proficiency with Microsoft Office Suite, Power BI, ERP System(s),, • Green Belt or higher certification preferred, • Project Management (PMP) certification preferred, • Food manufacturing experience a plus What We Offer • Comprehensive benefits package for full-time employees including medical, dental, vision, pet insurance and legal insurance., • 401(k) with company match that is immediately vested, • Life and ADD insurance, • Opportunities for career growth with a dynamic company, • Time away from work Our Values at Work We believe that ACTIONS speak louder than words and our company values align to those ACTIONS. In Our Daily Work, This Looks Like: • ACCOUNTABILITY: Set clear objectives and prioritize your tasks Hold yourself and your teams accountable for meeting deadlines Learn from your mistakes and use it as a learning opportunity to improve next time, • CURIOSITY: Collaborate with others and explore different perspectives when accomplishing a task or solving a problem Set learning goals for yourself and your team, and have a growth mindset: read books, subscribe to magazines, listen to podcasts, ask for recommendations, etc., on how to grow professionally and personally Don’t slap a band-aid on a problem – dig deep and determine the root cause of an issue, • TRANSPARENCY & HONESTY: Maintain open and consistent communication. Admit mistakes and take ownership Document decisions to help avoid misunderstandings, • INNOVATION: Work with the end-user in mind and create solutions that will add value Question existing norms, assumptions, and best practices Experiment and take calculated, data-driven risks, • OBJECTIVENESS: Utilize data and make data-driven decisions at every opportunity, • NIMBLENESS: Utilize time management to help stay focused and on task with urgency Continuously evaluate the effectiveness of current strategies and make adjustments accordingly Delegate and trust others to handle specific responsibilities with resources and support

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Ground keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Job DescriptionWelcome to WNC, New York’s Industry Leading Hotel Laundry Service.We are a state-of-the-art facility to handle the immense demands of New York most discerning hotels. We are seeking a talented Commercia Laundry Mechanic to join our team.The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job DescriptionSalary: $50,000 MAINTENANCE MECHANIC This position is responsible for maintaining the physical integrity of the property at all times. This involves insuring a safe and secure living environment for residents, visitors and staff. It is the duty of the Maintenance Mechanic to follow all directives given by the Facility Manager and Real Estate Asset Manager. * Maintain a safe environment * Cultivate resident satisfaction * Protect the investment of the * Complete or abate all emergency work orders within 24 hours * Complete all urgent work orders within 48 hours * Complete all routing work orders with in 72 hours Duties and Responsibilities * Conduct all business in accordance with the NHA policies and procedures, state and federal laws, OSHA, ADA, fair housing etc. Perform activities to maintain the continuity of essential environment services in order to guarantee resident comfort and security. * Conduct building walk-downs daily and replace all burnt out bulbs from hallways and stairwells and batteries in emergency lighting as needed * Maintain curb appeal of the property at all times. * Trash-out vacant units within 48 hours * Complete assigned work orders according to company guidelines * Strip and wax assigned floors quarterly * Monitor supplies and advise supervisor of items needed as necessary * Respond to after hour emergency calls when necessary. Preventive Maintenance/Safety * Follows NHA guidelines in proper storage of chemicals, maintaining maintenance data sheets current and readily accessible * Must be aware of the condition of physical property throughout the property and immediately report unsafe conditions, e.g., broken steps, open holes, broken/burned exterior, broken (doors locks, inoperable smoke detectors, gas leaks). * Performs minor and routine maintenance on all appropriate equipment on a regular basis, inspects and maintains all tools in excellent condition * Instills a safety first attitude not only with maintenance but also with all residents * Follows NHA guidelines for wearing safety items * Maintain accurate records regarding preventive maintenance, service request (received and completed), vacancy reductions status, work in progress, etc. * Trains Janitors helpers in various areas of repairs, cleaning, etc. * Assist in the completion of annual inspections General * Performs electrical repairs on items such as appliances, fixtures, switches, outlets, circuits, etc. * Performs plumbing work, such as clearing stoppages, replace fittings, etc. * Replace broken glass, tile, carpet, screens, garbage disposals, fixtures, appliances, blinds, locks, etc. * Performs carpentry work such as fitting doors, freeing windows, replacing and buildings shelves, stripping and waxing floors. * Assists in custodial work, including sweeping, mopping, vacuuming. Emptying trash, cleaning windows, etc. * Assist with grounds work when necessary * Performs limited exterminating services when required * Participates in a standby emergency schedule for evening, weekend, and holiday coverage * Is responsible for stock control and utilization of maintenance materials * Performs scheduled maintenance on all equipment based on the manufacturers recommendations and operating manuals * Has knowledge regarding water and gas cutoffs, all apartments and fixtures cutoffs and sewer cleanouts * Has constant knowledge regarding contracts and suppliers, their services and goods * Assist with move-in and move-out inspections * Makes sure that all apartment repairs and services are completed correctly and in a timely manner * Reports all major repairs and requisitions to senior site staff * Removes and transfers heavy appliances and equipment form storage area to apartment (or visa versa) as necessary * Complete unit trash out within 48 hours * Performs work area clean up and safety related duties * Performs any additional duties as assigned by NHA senior staff Qualifications * High school education or equivalent * Five to seven years of related experience is required to acquire a thorough knowledge of low-pressure gas/oil fired boilers, central and unitary air conditioning, domestic water, electrical, plumbing and life safety systems. * Valid drivers license * Full time maintenance experience or experience in related field * In-depth working knowledge of general maintenance practices and repairs (tile, concrete floors, painting, plastering and drywall patching, basic carpentry and appliance repairs * Maintenance experience or related field * Maintain open lines of communication with internal and external contracts for continuing operations and resolution of problems. Internal contacts include company personnel on site or off and residents * Concern for work safety programs * Ability to assist management in daily duties * Must acquire a State of New Jersey Black Seal License within 1 year of employment Vision Requirements: Constant need (66% to 100% of the time) to document maintenance and complete forms, review manuals and operating instructions, read cautionary labels, respond to written instructions from staff and complaints fro residents. Constant need to see small details when performing routine maintenance duties. Hearing Requirements: Constant need (66% to 100% of the time) to communicate with staff, residents, vendors, and must use listening skills to diagnose needed repairs, etc. Speaking Requirements: Constant need (66% to 100% of the time) to verbally communicate with assistants, residents vendors, NHA and resident. Equipment Required: Require to wear back support, safety shoes, wear goggles when working with specific equipment, wear masks and gloves arid other safety equipment as tasks dictate. Work Hours: 40 hours per week. Weekend circumstances warrant on call on a rotating basis for emergencies Equipment/Machinery/Tools: An employee in this position must be knowledgeable and skilled in the safe use and maintenance of the following: * Hand tools Various wrenches, hammer, grips, saws, sledgehammer, snips, post hole digger etc. * Power tools Wrenches, grinders, sanders, drills, saws, key machines, etc. * User moved aids wheelbarrows, dollies, hand tricks, buckets, hoist, jacks, step ladders, double ladders. Physical Requirements: Constant need (66% to 100% of the time) to be on feet have constant need (66% to 100% of the time) to perform the following physical activities: • Climb Stairs Ability to climb flights of stairs in order to handle service requests Make ready needs * Release elevators when necessary * Conduct building walk downs * Assist in emergencies Push or pull Move equipment Reach above shoulder Perform routine maintenance/repairs, stock and remove equipment Climb ladders Perform routine maintenance/repairs Grasp/Grip/Turning Handle tools, equipment, perform routine maintenance/repairs Finger dexterity Handle tools and equipment, perform routine maintenance/repairs Writing Inventory maintenance, requisition request, required maintenance reports Lifting, carrying (supplies, replacement parts, ladders, etc.) Over 150 lbs Rare need (less than 1% of the time) 75-150 lbs Occasional need (1% to 33% of the time) 25-75 lbs Frequent need (33% to 66% of the time) 1 -25 lbs Constant need (66% to 100% of the time) NOTE: Lifting and carrying of weights exceeding 50 lbs is often accomplished with assistance from one or more persons. Examples: Washer, dryers, refrigerators, A/C units, abandoned furniture, etc. Working Environment * Indoors (66% to 100% of the time), frequent outdoors (33% to 66% of the time), all conditions, often for extended periods * Occasional exposure (1% to 33% of the time) to paint fumes, solvents, adhesives, etc. * Frequent need (33% to 66% of the time) to work in awkward and confining positions Reasoning Development: High Moderate - Must be able to apply logical thinking to define problems, collect pertinent information, establish facts, and draw valid conclusions and initiate proper course of action. Must effectively convey ideas, images and goals to a variety of practical situations and accurately follow standardized procedures that may occasionally call for minor deviation. Need to think rationally beyond a specific set of instructions, must effectively work within a diverse group of personalities.

Job Description Job Summary: As a Hydraulic Repair Mechanic, you will be responsible for diagnosing and repairing various types of hydraulic equipment and machinery. Your expertise will ensure that our products function optimally and meeting customer satisfaction. Duties: Diagnose, repair, and maintain hydraulic systems, including pumps, cylinders, valves, and hoses. Knowledge of tools, parts, and equipment. Inspect, troubleshoot, and diagnose equipment issues Perform repairs and replacements of faulty components Conduct routine maintenance to prevent future breakdowns Collaborate with team members to identify and implement improvement opportunities Keep accurate records of repairs, parts used, and maintenance performed Maintain inventory of hydraulic components and spare parts Follow safety protocols and maintain a clean work environment Interact with clients to understand their hydraulic system needs Coordinate with suppliers for timely procurement Some local travel to support service calls Experience: Proven experience as a Hydraulic Mechanic Technician or similar role Proficient in using diagnostic tools and equipment Ability to read technical manuals, schematics and blueprints Excellent problem-solving skills Detail-oriented with a focus on quality workmanship Welding experience a plus Skills: Strong technical aptitude Strong analytical and troubleshooting abilities Effective communication skills Ability to work independently or as part of a team Time management skills to prioritize tasks effectively We offer competitive pay based on experience and skills. Occasional overtime available. Benefits package includes health insurance and paid time off. If you have the required experience and skills for this position, we would love to hear from you. Please submit your resume for consideration

Job Description Summary: Responsible for the execution, implementation and close supervision of the preventative maintenance system, to ensure preservation and upkeep of all buildings. Duties and Responsibilities include the following. Other duties may be assigned. • Regular inspection of buildings and grounds, notifying deficiencies of operating employees and service contractors, physical appearance of property, deferred maintenance and other related data to the Property Manager., • Trains, leads and becomes a resource to support staff to ensure staff is performing to expectation, informed of company policies, procedures, schedules all tasks are completed correctly, with attention detail and in a timely manner.*, • Supervises and assists subordinates in the cleaning of the community buildings, laundry rooms, office building, maintenance shop, storage areas, grounds, daily collection of debris on landscaped areas and continual sweeping of parking lot and dumpster areas.*, • Assists with the development and preparation and execution of property objectives, financials and goals including input for the preparation of the annual budget, business plan, rent increases, bid specifications and management of competitive bids and contract performance evaluation.*, • Accurate and timely completion of annual Unit Inspection and inventory of all project maintenance equipment and submittal to the Property Manager by December 1st of each year.*, • Responsible for timely initial response to HUD, HFA, state and local inspection reports. *, • Policing and inspection of buildings, pool, play area and overall grounds, as well as, noting any deficiencies of the physical appearance of the property and any other related data and reporting same to the Property Manager or Executive Property Manager.*, • Preparation and participation of emergency procedure manual and subsequent drills. Upon notification from the Property Manager or Executive Property Manager, be available for emergency duty (on call rotation), snow removal and in case of fire or any other emergencies as defined by management.*, • Observe, delegate, repair and ensure resolution of: light bulb replacement, sewer back-ups, smoke alarm operations, accompany contractors, cleanliness and presentation of vacant units, flooring upkeep; carpentry, plumbing, electrical, HVAC and appliance repairs; and necessary tile work.*, • Report and submit in a timely manner to the Property Manager or Executive Property Manager; lease infractions, completed daily task sheets, observation check list and related deficiencies in service, incident reports (within 24 hours for property, injuries and disturbances), work orders, as well as, applicable maintenance request forms. *, • Ensure employees are properly using designated safety equipment such as gloves, goggles, hard hat, ear protector and work books while operating any equipment., • Educates tenants on applicable rules and regulations of the property including; garbage disposal, appliances and heating/cooling systems, etc., • Adheres to all company policies and procedures., • Responsible for the security of the building(s) in regards to proper key control and continual observation and resolution of potential issues., • Follow and enforce safety rules such as our “No Smoking” policy in designated areas such as vacant and occupied unites, boiler rooms, storage areas and the management office., • Maintain discretion, confidentiality and provide customer service to all residents. Only address and communicate responses to your position level and responsibilities. Direct all residents to the Management Office for maintenance/repair requests., • Appear in court on behalf of the owner, ensuring our organization is presented in a professional, detailed and positive manner. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); and four to six years related experience and/or training; or equivalent combination of education and experience. Language Ability: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of manager, clients, customers and the general public. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Special Skills: Oral communication skills Multi-Tasking Professionalism Delegation Training Written communication skills Time management Technical communication Attention to detail Discretion Reading skills Mechanical aptitude Organization Diplomacy Customer Service Follow Up Computer Skills: Email, Internet and Microsoft Office Certificates and Licenses: Valid Driver's License Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to work in wet or humid conditions, work near moving parts, work in high precarious places, exposure to toxic or caustic chemicals and fumes or airborne particles, extreme heat (non-weather) and vibration. The employee is frequently exposed to outdoor weather condition and risk of electrical shock. The noise level in the work environment is usually loud. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move 75 pounds and frequently lift and/or move up to 40 pounds. Must occasionally lift/move heavier objects (Refrigerator, Stove, etc.) with assistance. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly required to; use hands, stand; walk; reach with hands and arms and talk or hear; stoop, kneel or crouch. The employee is occasionally required to sit; climb or balance; taste or smell. Schedule is Full Time 40 hours per week and some opportunity for overtime. Schedule can vary slightly based on location but it approximately 8 am to 5 pm. There is a rotating on call schedule for evenings/after regular work hours and weekends. Full Time 40 Hours Per Week

Job Description Raymond of New Jersey is a Material Handling Company, offering a broad range of forklift equipment, parts, service, rentals, and warehouse solutions. Currently seeking - A-Level Forklift Technician's (ONLY) - To join this incredible team of professionals in both our Union and Cranbury, New Jersey locations. If you're passionate about maintaining and repairing forklifts, WE WANT TO HEAR FROM YOU!! EARN TOP DOLLAR- We will beat your current pay substantially! (This is not a Forklift Operator position) -This position is a skilled role and MUST have prior experience. Please do not apply if you do not possess any mechanical experience. The ideal candidate for this role will have the ability to hit the ground running, in areas of service, repairing and diagnosing issues with Electric and Internal Combustion Forklift engines and systems, with an emphasis on Electric Forklift Repair. This role includes working with all facets of forklift repair, which includes the following: • Electrical System Troubleshooting, • Hydraulic repair, • Propane fuel system repair, • Electric computer control repair and diagnosis, • Must have knowledge of mechanical, electrical, and hydraulic systems, • Exceptional customer service skill, • Clean driving record, • Dependable, self-motivated professional, • Excellent work ethic and a POSITIVE attitude, • Ability to work with specialized mechanical and basic hand tools., • Clean professional appearance and will wear complete company uniform including safety boots. · Paid training. · Competitive Salary and Benefit package · Offering Medical, Dental, Life Insurance, 401K and Paid time off. · Opportunities for growth and advancement · Collaborative and supportive work environment. We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status Job Type: Full-time Company DescriptionRaymond of New Jersey is a Premier Material Handling Dealership located in NJ offering a broad range of forklift equipment, parts, service, rentals and warehouse solutions.Raymond of New Jersey is a Premier Material Handling Dealership located in NJ offering a broad range of forklift equipment, parts, service, rentals and warehouse solutions.

Job DescriptionTo maintain, operate, and repair boilers and related equipment to ensure the safe heating of water. Some of the responsibilities include: • Operating equipment: Starting and stopping boilers, engines, and auxiliary equipment, • Monitoring systems: Reading gauges, meters, and charts to track boiler operations, • Maintaining systems: Performing preventative maintenance on boilers, plumbing, heating, and ventilation systems, • Adjusting systems: Activating valves to change the amount of water, air, and fuel in boilers, • Licenses: Blue License (REQUIRED) Inspecting equipment: Checking safety devices and ensuring equipment is operating efficiently Recording data: Keeping logs of operation, maintenance, and safety activity Troubleshooting: Correcting equipment malfunctions and responding to alarms Maintaining cleanliness: Keeping the boiler room clean Testing water: Testing water quality for signs of corrosion and determining water hardness Ordering parts: Ordering and maintaining supply or replacement parts Boiler operators will work independently, pay attention to detail, and have mechanical aptitude. They should also be familiar with safety regulations and be able to work in a team environment. While some industry experience is helpful, practical experience with boiler operation is usually more important.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description • Conduct regular inspections of building systems including electrical, plumbing, HVAC, general cleanliness and condition of facility, • Inspect general cleanliness and condition of facility; report and address any deficiencies, • Diagnose mechanical and electrical malfunctions and make recommendations for repair, • Perform plumbing repairs including but not limited to replacing flush-o-meters, metering cartridges, water fountain filters, sink faucets, and the like, • Undertake minor electrical repairs, including low-voltage PA, LAN cabling, change light fixtures, switches, outlets, and ballasts, • Repair and install doors, door closers, and locks, • Prepare and paint walls and woodwork; perform other types of refinishing, • Build, repair, and install counters, cabinets, benches, partitions, floors, doors, and trim, • Conduct spot repairs of VCT flooring and rubber treads, • Perform regularly scheduled maintenance on building systems, • Provide estimates of materials required, • Carefully track expenditures against budgeted allowances ensuring no exceedances, • Establish and maintain effective relationships with school personnel and vendors, • Identify situations that require escalation or elevation to supervisor or manager for guidance or to request additional support, • Perform general maintenance and repair tasks as needed, under direction of on-site facilities manager, • Ensure that work sites and conditions are safe, • Perform assignments to ensure all schools can safely open and function, • Respond to emergency situations and perform vital repairs or act as a point person during a facility emergency regardless of the day or hour, • Work collaboratively with other school employees during emergency operations, • Consistently use the work order system, ensuring that all work performed onsite is documented correctly and updated in a timely manner; ensure work orders are completed and detailed accurately, • Track, document, and maintain all PM inspections and reports for each site, • Maintain an adequate supply of parts used for repairs, and request needed supplies through the established procedures, • Be available to oversee snow removal vendors, • Ensure safe-keeping of company property, and report immediately to managers any damage or vandalism to facilities or theft of equipment, • Protect confidentiality of records and information gained as part of exercising professional duties, • Serve as a role model for students and staff by demonstrating a positive attitudes appropriate attire and grooming, and a dedicated work ethic, • Participate in in-service and workshop programs and meetings as required, • Display ethical and professional behavior in working with students, parents, school personnel, and outside agencies associated with the school, • Adhere to federal statutes and regulations, New Jersey school law, State Board of Education rules and regulations, Uncommon Schools policies and procedures, and contractual obligations, • Perform any duties and responsibilities that are within the scope of employment as assigned by managers and not otherwise prohibited by law or regulation, • Display a cooperative and pleasant demeanor, particularly when in the presence of staff, students, and community visitorsQualifications, • 5-6 years of professional experience with 3-4 years of directly related experience, • Exhibit working knowledge of:, • low pressure steam boilers, one and two pipe steam systems, condensate return lines, condensate return pumps, • chillers, 2- and 4-pipe chilled water HVAC systems, and chilled water pumps, • cooling tower operations, cooling tower water circulation pumps, and make-up water controls, • electrical systems including three phase, single phase, and low voltage, • elevator operations and safety requirements, • water treatment laws and practices for boilers, chillers, and cooling towers, • commercial plumbing systems including storm, waste water, sanitary wastewater, hot potable water recirculation systems, cold water supply, and potable water booster pumps, • roofing, masonry, building envelope components and waterproofing, • Travel within Newark to meet responsibilities of building portfolio; occasional travel to Camden for team meetings. Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. [same for all roles] Compensation Compensation for this role is between $32 to $37/hour. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • 19 days of paid time off, • 3 weeks of paid Winter and Summer org-wide holidays, • Comprehensive Health, Dental, and Vision insurance plans, • 403(b) retirement savings program + employer match, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email .

Job DescriptionBenefits: • Employee discounts, • Free uniforms, • Opportunity for advancement, • Paid time off Job descriptions Title: Automotive Technician Job Type: Full-time Summary S & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Job Description Job Summary: Our award-winning, Northern NJ repair facility includes three thriving and bustling auto repair shops and we take great pride in our large team of service technicians. We seek all levels of auto technicians, will cross-train from other brands and provide a sign-up bonus for qualified candidates. The Automotive Mechanic/Technician will report to the Service Director. We’re looking for the right fit: A person with a can-do spirit and positive attitude who thrives in a fast-paced, dynamic environment. A confident and self-motivated individual with a pleasant, outgoing personality ready to generate revenue. Job Responsibilities (include but are not limited to): • Up to $75.00/hour car and light truck, • Diesel up to $75.00 / hour, • 50-hour guarantee, • SIGN ON BONUS, • Vacation first year, • 401 K Plan, • Free toolbox pick-up, • Flexible schedule, • Unlimited work, • Writers that can sell, • Stable management, • Guaranteed training, • Two (2) bays for each tech, • Five-day work-week, • Upper management that actually appreciates the hard work of the service department, • Advancement to management path with training, • Permission to work on your own cars (No side jobs, sorry), • All the best special tools and equipment, • Demonstrate behaviors consistent with Maplecrest’s Vision, Mission and Values in all interactions with customers, co-workers, vendors and suppliers., • Adhere to all company policies, procedures and safety standards Equal Employment Opportunity Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR qMRXJQqTO8

Job Description Automotive Master Technician Open Road Chevrolet MASTER GM Experience Sign On Bonus Special Benefit Rates for Masters Up to 3 weeks vacation Awesome Team!! Summary: Responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work. Responsibilities include the following: • Examining customer vehicles., • Identifying necessary vehicle repairs and maintenance., • Estimating cost of repairs., • Performing vehicle repairs and maintenance., • Documenting services performed., • Performing services efficiently and according to dealership guidelines., • Following dealership and manufacturer service guidelines., • Requesting necessary parts., • Maintaining CSI (Customer Service Index) at or above Company standards, • Maintaining an organized, clean and safe work area, • Participating in required training, • Recording all hours worked accurately in Company timekeeping system, • Following all Safeguards rules and regulations., • Demonstrating the Company’s Core Values, • Complying with Company policies and procedures, • Observing all Federal, State, Local and Company safety rules and regulations in the performance of duties., • Knowledge of automotive parts and systems. Demonstrable mechanical skills and knowledge., • Technical training or commensurate technical experience required., • Certificates and Licenses, • Valid Insurable Driver’s License Company Profile: Open Road Auto Group owns and operates over twenty-five automotive facilities including seventeen dealerships throughout the New York/New Jersey metropolitan area. Currently, we are ranked as one of the largest automotive groups in the nation by Automotive News. We specialize in providing “in-demand” vehicles, both new and pre-owned, for our customers who have come to expect a “Five-Star Customer Service Experience”. With over 50 years of automotive experience, our mission is to remain one of the premier automobile retailers in the country, providing the best opportunities for our team members, customers and communities. We understand and acknowledge the importance of our customers and in doing so we strive to develop a highly motivated, world-class, workforce that is committed to satisfying their needs. At Open Road we know our employees, and their achievements, drive our culture and success. Our Total Compensation Rewards Program includes: BASE PAY - Determined by competitive market pay rate for your job, your skills, experience and performance BONUSES - Rewards achievement of specific business goals, in eligible positions BENEFITS - Includes wellness coverage, optional benefits, income protection, 401(k), and purchase programs, such as: • Medical, Dental and Vision Plans, • Vacation Time / Personal Time, • Short and Long Term Disability, • Life Insurance, • 401(k) Retirement Plan with employer match, • Manufacturer Certifications, • Leadership Training Programs, • Vehicle Purchase Discounts, • Wellness Initiatives sLFZFzGRap

Job Description WE ARE CURRENTLY PAYING UP TO $75.00 PER HOUR DEPENDING ON EXPERIENCE THE FOLLOWING ITEMS ARE SOME OF THE REQUIRMENTS OF PERFORMING THIS POSITION. • Oversee operations in an auto service unit to ensure compliance with quality standards, • Contact clients and convince them to bring vehicles to their unit for repairs, • Oversee the inspection of automobiles to identify faulty components and facilitate process for repairs, • Supervise the activities of automotive service technicians to ensure efficient job performance and timely repairs, • Conduct price negotiations with clients to reach a favorable bargain for both management and client, • Oversee the hiring and training of an effective auto service team, • Maintain accurate record of all accounts and relevant financial information, • Monitor inventory to regulate and ensure availability of required vehicle parts, • Ensure automotive service staff comply with environmental laws and regulations, • Oversee the procurement of vehicle parts, automotive equipment and various other items required in an auto service department, • Evaluate the performance of automotive service staff in order to acknowledge efficient employees and guide underperforming ones, • Listen to client complaints and assist in addressing their issues and resolving challenges, • Oversee the disposal of wastes such as used engine oil, soot to ensure adherence to health and safety laws, • Assign and schedule work duties to auto service staff according to their skills, • Follow up customers to obtain feedback and ensure they are satisfied with received service, • Attend workshops and study relevant publications to stay up-to-date with developments in the automotive service industry., • Strong communication and customer service orientation: A good mechanic must be able to communicate and relate very well with customers. This quality is very important in conveying information on car condition to customers and convincing them that you are capable of handling the problem. Customers will always feel at ease when complex technical issues are explained to them in plain language that they can easily understand, • Good diagnostic and problem solving skills: A good auto mechanic should be able to quickly identify the source of minor problems manually. For complex problem, using diagnostic tools is important. Also, it is very important that the mechanic is able to fix or proffer solution to the problems in real time, • Dexterous and energetic: He/she should be skilled at using complex and hand tools. In addition, he/she must be energetic and have the stamina to sit, stand, bend, kneel, and squat while carrying out his/her job, • Educated and certified: These two requirements may not be mandatory, but they are necessary. For one to be employed as a mechanic, he/she must be trained. Going ahead to obtain a recognized certificate like the ASE certificate for auto technicians presents him/her as a true professional. Also, most employers prefer to hire auto mechanics with minimum qualification of high school diploma, • Innovative and ability to learn fast: A good automobile mechanic must always be on the lookout for better techniques and tools for carrying out his/her duties. He/she must be able to learn and adapt fast to changes in diagnostic and repair technology. WE OFFER THE FOLLOWING BENEFITS • PAID SICK DAYS, • PAID VACATION, • TOP TOP, • UNIFORMS Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR R8YOnOS4aP

Job Description At Autoland Toyota Chrysler Jeep Dodge Ram, we are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. If you have an interest in automotive and a desire to develop a career in the industry, apply today! Are you experienced with basic level automotive maintenance and frustrated or bored with your current workplace? Do you want to enjoy a productive, safe, and professional environment where you can grow your career and feel good about where you work? We're looking for Oil Change/Entry Level Automotive Technicians to join our team. If this sounds like you, then come and see what we have to offer! What We Offer • Medical, Dental & Vision Insurance, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Health and wellness, • Discounts on products and services, • Air-conditioned shop, • State-of-the-art facility and cutting edge technology, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Knowledge of automobiles, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED; Technical degree preferred, • Minimum of 1 year in service department, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Positive, friendly attitude We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: • Repairing advanced vehicle electrical issues, • Installing, repairing, and replacing vehicle refrigerant and recovery systems Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: • Repairing advanced vehicle electrical issues, • Installing, repairing, and replacing vehicle refrigerant and recovery systems Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Competitive Compensation:, • Career Advancement:, • Training and Development:, • Comprehensive Benefits Package:, • Employee Discounts:, • Positive Work Environment:, • Locally-Owned:, • Cutting-Edge Tools and Equipment:, • Work-Life BalanceResponsibilities:, • Perform basic automotive maintenance tasks, such as oil changes, tire rotations, and filter replacements, to meet Meineke's high-quality standards., • Assist experienced technicians in diagnosing and troubleshooting mechanical and electrical issues in vehicles., • Follow Meineke's standard operating procedures and safety guidelines while handling tools, equipment, and vehicle systems., • Conduct routine inspections and assist in basic repairs on brakes, suspension systems, exhaust systems, and other automotive components., • Maintain accurate records of services performed, including parts used, labor hours, and vehicle conditions, ensuring compliance with Meineke's documentation standards., • Collaborate with senior technicians and service advisors to effectively communicate vehicle issues, repair recommendations, and estimated costs to customers., • Uphold Meineke's commitment to customer satisfaction by providing excellent service and addressing customer concerns professionally., • Continuously update your knowledge and skills through training sessions, workshops, and Meineke's resources to stay up-to-date with automotive industry trends and advancements.Requirements:, • High school diploma or equivalent., • Previous experience or technical training in automotive repair is preferred., • Basic understanding of automotive systems and components., • Familiarity with diagnostic equipment used in automotive repair., • Ability to follow instructions, work effectively in a team environment, and uphold Meineke's commitment to high-quality work., • Strong attention to detail and problem-solving skills., • Excellent communication and customer service skills to ensure customer satisfaction., • Physical stamina and dexterity to perform manual tasks and lift heavy objects (up to 50 pounds).Why Meineke?, • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Health insurance We are looking for an Intermediate Level Technician (B Tech) that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility, and we are looking for automotive technicians to help us create an environment of success! Responsibilities As a Midas general service technician, youll be exposed to and have responsibility for performing a wide range of automotive maintenance services, including: • Perform a thorough visual safety and courtesy inspection., • Performs tests on specific parts and systems to determine whether they are operating properly., • Mounting, balancing and rotating tires, • Replacing batteries, • Changing bulbs, belts and hoses, • Repairs or replaces malfunctioning parts and systems such as but not limited to brake pads, belts, tires and water pumps., • Performs routine and preventative maintenance including oil changes and tune-ups., • Ability to work on more complex jobs with some assistance such as diagnostics., • Test drive vehicles to confirm that repairs have been made properly., • Maintaining and cleaning shop areas, • Willingness to learn and grow as a technician, • ASE certification preferred but not required., • Intermediate level technicians must have prior knowledge of automotive basics., • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills with some assistance., • Ability to perform repairs in a timely manner., • Ability to read service manuals, repair manuals and work orders.