Plc jobs in East Orange, New JerseyCreate job alerts

Job Description Job Purpose The Maintenance Technician assists in performing highly diversified duties to install equipment, troubleshoot, and maintain production of all JESPY facilities and equipment according to safe and productive maintenance systems and processes. This position is responsible for staying abreast of current trends as they relate to the department and staying aligned with best practices. This Maintenance Technician is also responsible for assisting in the monitoring of all construction, repairs, etc., of all agency sites. This position assists in the monitoring of all JESPY vehicles, including registration and insurance state compliance as well. Essential Functions • Responsible for maintenance (interior and exterior) of all JESPY properties, • Evaluate the need for renovations, • Assist in establishing budgetary guidelines with the Director of Operations for repairs and capital improvements, • Obtain estimates for all contracted work on JESPY property, • Assist in monitoring of all project progress through completion, • Coordinate purchase and maintenance of all JESPY vehicles, • Cooperate with the state agencies in any inspection or investigation, • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Assist in the preparation and administration of the program budget; submit budget recommendations; monitor expenditures, • Monitor and track any expenditure on the supplied credit card and report all expenditures to the finance department, • Other duties as assigned by the Executive Office Competencies • Customer/Client Focus, • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • Initiative, • Results Driven, • Adhere strictly to HIPAA requirements and all agency confidentiality guidelines., • Establish positive, balanced relationships with clients, as demonstrated by:, • treatment of individuals with respect and dignity and in an age and culturally appropriate manner;, • a commitment towards the individual's rights and responsibilities; and, • Other responsibilities that may arise within the job scope, • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Educational Requirements • Extensive experience with precision measuring instruments or electronic testing devices, • Extensive experience performing routine maintenance, • Strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC a plus Skills/Abilities • Skilled in the use of hand and power tools, • Ability to check blueprints, repair manuals, or parts catalogs as necessary, • Ability to use common tools such as hammers, hoists, saws, drills, ad wrenches,, • Strong organizational and follow up skills, • Eye for detail, • Professional presentation and attitude, • Strong time management skills, • This is a full-time position, and hours of work and days may vary Special Working Conditions/Physical/Requirements – Working Environment • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud., • Must be available for coverage on some weekends and after 5pm when required., • Must hold a high school diploma, • Valid New Jersey driver's license is required, • Must hold CPR/First Aid Valid Certification, • Successful clearance of NJ background check, • Successful clearance of Drug Screening, • Has fulfilled the necessary training requirements and is in good standing in order to bill Medicaid for Support and Community Care Waiver (CCW) Services and CDS Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Job Description Staff Management Group is seeking a Packaging Mechanic for our client in East Hanover, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 3rd Shift: 11PM - 7:15AM Pay Rate: • $30 - $35 / hour Job Summary: We are seeking a highly skilled and proactive Packaging Machinery Mechanic to support our 3rd shift operations, who can expertly set up, operate, troubleshoot, and maintain all packaging equipment. Job Responsibilities: • Lead setup and changeover for packaging lines—blister machines, bottle fillers, cartoners, inkjet and UV printers, vision systems—ensuring proper tooling, alignment, and format accuracy., • Set and verify all process parameters (speed, temperature, fill levels, print registration) in accordance with documented SOPs and regulatory standards, • Diagnose and resolve mechanical, electrical, pneumatic, and automation-related issues quickly to maintain uptime., • Perform preventive maintenance tasks—lubrication, inspections, parts replacement—to reduce breakdowns and extend equipment life., • Collaborate closely with Quality Assurance to investigate packaging defects, regulatory deviations, or customer complaints, providing corrective actions and improving process controls., • Ensure strict adherence to cGMP, DEA, OSHA, and internal safety guidelines; lead safety reviews, lockout/tagout (LOTO), line clearance, and approval protocols., • Maintain detailed machine logs, maintenance records, and batch documentation in CMMS/SAP for compliance and auditing purposes., • Analyze production inefficiencies and waste, recommending and implementing process improvements and potential equipment upgrades or expansions., • Leverage solid working knowledge of PLCs and automation controls, and familiarity with continuous and thermal inkjet, UV printers, vision systems, and automotive-grade packaging machinery., • Actively recommend new technologies, retrofit opportunities, and automation strategies to support future-scale operations. Job Requirements: • Education/Experience: High school diploma or technical degree. Minimum 5 years' experience in packaging machinery maintenance and operation., • Proficient in mechanical, electrical, hydraulic, and pneumatic systems., • Skilled in PLC programming and troubleshooting., • Experienced with various packaging equipment—fillers, labelers, cartoners, blister systems, inkjet/UV printers, vision systems., • Soft Skills: Strong leadership, communication, training, and teamwork capabilities. Demonstrated ability to prioritize, solve complex issues, and drive continuous improvement., • Compliance: Deep understanding of cGMP, DEA, OSHA, and other relevant regulatory frameworks., • This role reports directly to the Director of Operations, takes hands-on responsibility for packaging machinery integrity, and works closely with QA, Production, and Engineering. Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Essential Functions • Responsible for providing maintenance of all JESPY properties, • Evaluate the need for renovations, • Establish budgetary guidelines with the Director of Operations for repairs and capital improvements, • Obtain estimates for all contracted work on JESPY property, • Monitor all project progress through completion, • Coordinate purchase and maintenance of all JESPY vehicles, • Cooperate with the state agencies in any inspection or investigation, • Perform a variety of plumbing maintenance, carpentry, and painting functions., • Assist in the preparation and administration of the program budget; submit budget recommendations; monitor expenditures, • Request cash as needed for weekly programming and resolve cash disbursements with the finance department, • Monitor and track any expenditure on the supplied credit card and report all expenditures to the finance department, • Identify donors or companies that may donate supplies for various program, • Developing and maintain metrics relative to service delivery and departmental performance, • Customer/Client Focus, • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • Initiative, • Results Driven, • Adhere strictly to HIPAA requirements and all agency confidentiality guidelines., • Establish positive, balanced relationships with clients, as demonstrated by:, • treatment of individuals with respect and dignity and in an age and culturally appropriate manner., • a commitment towards the individual's rights and responsibilities; and, • Other responsibilities that may arise within the job scope, • Experience with precision measuring instruments or electronic testing devices, • Experience performing routine maintenance, • Skilled in the use of hand and power tools, • Ability to check blueprints, repair manuals, or parts catalogs as necessary, • Ability to use common tools such as hammers, hoists, saws, drills, ad wrenches,, • Strong organizational and follow up skills, • Eye for detail, • Professional presentation and attitude, • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud., • Must be available for coverage on some weekends and after 5pm when required., • Must hold a high school diploma, • Valid New Jersey driver's license is required, • Must successfully complete CPR/First Aid Valid Certification, • Successful clearance of Drug Screening, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to talk and hear., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items of 75 pounds. Direct Reports • PACE Participants, • Contractors Salary commensurate with experience Notes/Comments This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position.

Job Description The Facility Maintenance Technician assists in performing highly diversified duties to install equipment, troubleshoot, and maintain production of all JESPY facilities and equipment according to safe and productive maintenance systems and processes. This position is responsible for staying abreast of current trends as they relate to the department and staying aligned with best practices. This Facility Maintenance Technician is also responsible for assisting in the monitoring of all construction, repairs, etc., of all agency sites. This position assists in the monitoring of all JESPY vehicles, including registration and insurance state compliance as well. Essential Functions • Responsible for maintenance (interior and exterior) of all JESPY properties, • Evaluate the need for renovations, • Assist in establishing budgetary guidelines with the Director of Operations for repairs and capital improvements, • Obtain estimates for all contracted work on JESPY property, • Assist in monitoring of all project progress through completion, • Coordinate purchase and maintenance of all JESPY vehicles, • Cooperate with the state agencies in any inspection or investigation, • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Assist in the preparation and administration of the program budget; submit budget recommendations; monitor expenditures, • Monitor and track any expenditure on the supplied credit card and report all expenditures to the finance department, • Other duties as assigned by the Executive Office Competencies • Customer/Client Focus, • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • Initiative, • Results Driven, • Adhere strictly to HIPAA requirements and all agency confidentiality guidelines., • Establish positive, balanced relationships with clients, as demonstrated by:, • treatment of individuals with respect and dignity and in an age and culturally appropriate manner;, • a commitment towards the individual's rights and responsibilities; and, • Other responsibilities that may arise within the job scope, • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Educational Requirements • Extensive experience with precision measuring instruments or electronic testing devices, • Extensive experience performing routine maintenance, • Strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC a plus Skills/Abilities • Skilled in the use of hand and power tools, • Ability to check blueprints, repair manuals, or parts catalogs as necessary, • Ability to use common tools such as hammers, hoists, saws, drills, ad wrenches,, • Strong organizational and follow up skills, • Eye for detail, • Professional presentation and attitude, • Strong time management skills, • This is a full-time position, and hours of work and days may vary Special Working Conditions/Physical/Requirements – Working Environment • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud., • Must be available for coverage on some weekends and after 5pm when required., • Must hold a high school diploma, • Valid New Jersey driver's license is required, • Must hold CPR/First Aid Valid Certification, • Successful clearance of NJ background check, • Successful clearance of Drug Screening, • Has fulfilled the necessary training requirements and is in good standing in order to bill Medicaid for Support and Community Care Waiver (CCW) Services and CDS Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Job DescriptionBenefits: • 401(k), • Dental insurance We are seeking a talented Commercia Laundry Mechanic to join our team. The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Protection & Control Engineer/Technician – Field Testing & Commissioning Travel-Heavy Field Role – Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We’re looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You’ll Do: * Test and commission P&C systems on high-voltage substations (15 kV – 500 kV) * Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets * Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing * Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports * Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: * 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) * Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. * Experience with NETA, IEEE, NFPA, and related standards * Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset * Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: * Bachelor’s in Electrical Engineering/Electrical Technology * Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) * IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of mechanical systems. Must be a self-motivated & energetic professional. Must have understanding of building mechanical systems design, construction & operation. Must have experience with commissioning process of mechanical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of mechanical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources, and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission mechanical, plumbing & fire alarm and suppression equipment and related controls, primarily in data center environments., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with Mechanical, Plumbing & FLS building systems & equipment, including, but not limited to:, • Air Cooled Chiller, • Water Cooled Chiller, • Cooling Tower, • Direct Evaporative Cooling System, • Air Handling Unit, • Computer Room Air Conditioning Unit, • Process Water Plants, • Boilers, • Fuel Systems, • Backup generators, • Gas turbines, • Reciprocating engines, • Steam turbines, • Selective catalytic reduction systems, • Fan Coil Unit, • DX Split System, • Fan Array, • Chemical Injection System, • Variable Frequency Drive, • Variable Refrigerant Volume System, • Rooftop Unit, • Variable Air Volume Unit, • Makeup Air Unit, • Hydronic Pump, • Leak Detection, • Heat Trace, • DDC & PLC Controls, • Fire Pumps & Controller, • Pre‐Action Fire Suppression System, • Fire Alarm Control Panel, • VESDA System, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation., • Hybrid Work Environment.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable mechanical and/or controls experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Team player and a “client-first” mentality., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician IV Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Please note that this opening is specifically for our NY2 Night shift. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outagesManage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer) 1. Cage Build-Outs 2. Overhead Installations 3. Rack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8Guiding Principles. Requirements Knowledge, Skills & Abilities: Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check including criminal history, professional references, and employment and education verification. Physical Demands and Special Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Posting Timeline: This role is anticipated to be posted through September 4, 2025. Compensation: Compensation for this role includes a base salary between $41.94 - $46.64 hourly, as well as performance-based commission and equity. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 4-panel drug test conducted after the offer letter is signed, which will screen for opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Expanding Service Company seeks PLC technicians with (Allen Bradley etc) to work on troubleshooting, repair and installation of fire alarm / security and BMS systems in high-rise buildings. Must be capable of writing clear, concise, detailed field reports and accept responsibilities. Must exhibit a professional appearance and perform all services in accordance with Company standards to present a professional image to the customer and general public at all times. We offer an excellent salary, growth opportunity, healthcare benefits and the unique opportunity for self-motivated individuals to advance in career. Company DescriptionFast-paced service company with heavy deadlines that must be adhered to on a daily basis. Excellent customer service skills results drivenFast-paced service company with heavy deadlines that must be adhered to on a daily basis. Excellent customer service skills results driven

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; coordinating and executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources; and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including high voltage and medium voltage systems., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Understand critical power quality requirements and test procedures., • Perform thermographic surveys and analyze results., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • High / Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Hybrid Work Environment., • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood and Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Plant Project Engineer I will provide engineering support and project leadership for the plant The expectation is that this role will spend approximately 60% of the time on project related activities and 40% of the time on plant support activities. At times either activity could exceed expectation. The Plant Project Engineer I role will include project implementation, production and equipment improvement initiatives and support the daily operations of the plant to ensure all safety and quality goals are achieved. Qualifications • Project management, project planning, project coordinator, purchasing, and supervision of contractors for various projects to assure completion on a timely basis within budget., • Adhere to and enforce Good Manufacturing Practices (GMP) and HACCP requirements., • Lead and assist management with appropriate training to assure regulatory compliance., • Report to the Director of Engineering with a dotted line to the Plant Manager., • Maintain appropriate communication/relationships with all employees, vendors, visitors., • Provide the necessary safety training to contractors and others as necessary., • Follow, monitor, and ensure compliance with all safety, food safety, environmental, GMP rules, regulations, and policies., • Attend daily production/quality meetings., • Provide technical support for plant processes and improvements., • Observe facility operations and assist with problem solving on a regular basis., • Excellent oral and written communication skills with proven ability working well with people., • Ability to identify critical areas for improvement and develop plans for correction., • Competent in making sketches, drawings, line layouts, plans etc., and written instructions as necessary to affect equipment maintenance / repair., • Participative team attitude skills with all personnel to assure production standards, safety, and sanitation levels are maintained as defined by the Mission Statement., • Good skills in ammonia refrigeration, steam generation and PLC’s., • Good problem solving skills through team and individual efforts. BS degree in engineering or technical related area from an accredited college/university; Chemical, Electrical, or Mechanical preferred Related Experience Proven Engineering experience of 3 – 5 years, project management is a plus Equipment/Software Skills Working knowledge in personal computers (Microsoft software necessary, Project management, Microsoft Project preferred) and basic understanding with Allen Bradley PLC. Knowledge of CMMS such as MP2 is a plus. Must have good working knowledge of general PC systems. Certifications, Licenses, Registrations None required, any maintenance related licenses would be a plus such as PE, ASME welding, PLC’s , wastewater, etc. Additional Information Physical: While performing the duties of this job, the employee is regularly required to walk, sit, and stand. The employee will also be required to use hands, arms and fingers. Must have the ability to lift 50 pounds. Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Language Bi-lingual is preferred Sensory: Visual, speaking, and touch is essential. Mental/Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Salary: $122,000 to $153,000 Annual Bonus Incentive: 5% Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

United States is not affiliated with Prudential plc. Prudential is an equal opportunity employer. As the Global Asset Management business of Prudential, we're always looking for ways to improve financial services.

As a Healthcare Financial/Actuarial Director, you will be a key member of the Financial, Actuarial and Analytics (FAA) Community of Expertise. You will lead financial and actuarial engagements for a portfolio of clients and play a strategic role on complex accounts, delivering insights that shape be

Job DescriptionMechatronics Tech Mechatronics Technician Position Overview We are seeking a skilled Mechatronics Technician to join our team. The ideal candidate will have a strong foundation in mechanical and electrical systems, as well as experience with automation and control technologies. This role is essential for maintaining and improving our manufacturing processes through system integration and troubleshooting. Key Responsibilities • Collaborate with engineers to design and implement mechatronic systems., • Maintain and repair mechanical and electrical systems in production equipment., • Program and troubleshoot PLCs for automation processes., • Utilize CAD software to create and modify technical drawings., • Test and evaluate new sensor technologies for integration into existing systems., • Conduct routine maintenance and inspections of automated machinery., • Assist in the development and optimization of manufacturing processes., • Document all maintenance and repair activities in compliance with company standards.Qualifications, • Associate degree in Mechatronics, Mechanical Engineering, Electrical Engineering, or a related field., • Proficient in CAD software for system design and documentation., • Experience with PLC programming and troubleshooting., • Strong knowledge of mechanical systems, electrical systems, and electronics., • Familiarity with control systems and automation technologies., • Excellent problem-solving skills and attention to detail. Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 11/20/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

At Johnson Controls (NYSE:JCI), we are One Team working collaboratively to create purposeful solutions that make a difference in the world. Recently, Johnson Controls has been recognized by several organizations for leadership in Environment, Sustainability and Governance, as well as innovations in

National Express LLC (NELLC) is the North American subsidiary of National Express Group, PLC, one of the premier transportation firms in the United Kingdom. National Express School (NEXS) is the home-to-school division of NELLC, which operates more than 22,500 school buses, serves more than 550 scho

Competitive pay + bonus / Medical, dental & vision / Retirement savings plan / PTO - As a Customer Care Rep at Amcor plc, you will: Interact with customers, internal and external, to process orders, provide order information, and perform a variety of customer account management duties necessary to m

Job Description General Description: Troubleshoot and repair electrical machinery using VOM and schematics, Wire electrical enclosures, motors, PLC terminals, and electrical devices using a VOM and schematic. Perform basic PLC program and troubleshooting. Reports to: Production Manager / Maintenance Eng. Responsibilities: • Maintain the electrical in the building and presses., • Read and understand electrical schematics and blueprints, • Wiring equipment, • Experience in A/C 120/208/470 Volts, • Experience with EMT tube bend and rigid pipe, • Electrical experience, • PLC experience, • Wiring and troubleshooting electric circuit per schematic Minimum Additional Training (If Applicable): • Company’s Quality Management System, • An ability to work well under pressure, • Good verbal and written communication skills, • Relevant technical knowledge, • Problem-solving skills, • Efficiency and organization, • Teamworking skills, • Preferred Spanish

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; coordinating and executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources; and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including high voltage and medium voltage systems., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Understand critical power quality requirements and test procedures., • Perform thermographic surveys and analyze results., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • High / Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Hybrid Work Environment., • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a business with an almost 170-year history of innovation, and five global divisions, all experts in their field. We believe that different perspectives and backgrounds are what make a company flourish and are proud to be a company with values grounded in integrity, respect, ownership, customer focus, and passion. Job Description This position requires daily travel to locations in and around the New Jersey, and New York Metro area, including the airport. Troubleshoots, services, installs (deploys) and repairs Trace, X-Ray, CT X-Ray and Cargo Inspection equipment at customer sites. Maintains field service log and filing system to properly initiate, organize and maintain all field service and job files until work is completed Demonstrates initiative and dedication through positive use of downtime and an overall willingness and eagerness to consistently exceed customer and company requirements. Conducts follow up calls with the customer to ensure satisfaction of work. • Responsible for meeting daily service repair needs and driving customer satisfaction, • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Installs, repairs and maintains equipment in the field; provides customer training as required., • Must be able to respond to emergency and non-scheduled calls for service within established response time goals., • Completes all scheduled maintenance within required deadlines. Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Maintains an accurate inventory of parts and tools., • Maintains currency on all technical certifications., • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Looks to senior level FSTs for knowledge growth and support when needed., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, champion special projects and prepare exclusive reports., • Possesses a solid level of technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication proficiency, both oral and written, • Establishes and maintains a close relationship with senior level FST’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs while maximizing revenue, • Must submit expenses, time cards and other administrative tasks within the specified timelines., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as requiredQualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation. OTHER REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be confident in the operation of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires full body mobility Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. HIRING SALARY RANGE: $56,480 - $114,600/yr. (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, protected veteran status, disability, or any other legally protected characteristic. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail or call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection participates in the Electronic Employment Verification Program. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Qualifications: Start Time:6:30 AM End Time:3:00 PM ELECTRICIAN - WATER/WASTEWATERTREATMENT FACILITY Basic Qualifications High school diploma or GED. Possess a valid validelectrician certification. Possess a valid driverslicense with a clean driving record. Ideally, youll also have: Five years of experience inthe maintenance of wastewater treatment plants and related equipment, orindustrial setting with experience performing the following: Five years of electricalexperience troubleshooting and repairing: motors, pump controls, VFDs, motoroperated valves, calibrating flow meters, lighting systems and other equipmentrelated to wastewater treatment or similar industrial setting. Proficient in the use ofComputerized Maintenance Management Systems (CMMS) Bend/install conduit to complywith NEC code. IR Thermography (basicknowledge) certification is not a requirement but may be asked to try andattain certification. Properly size wire to complywith NEC code. Motor / pulley alignment Troubleshooting a variety ofelectrical and mechanical equipment on site. Ability to prioritize theworkload. Troubleshoot VFD, VFDcontrols, motor windings, lighting systems etc. Proficient in use ofmultimeters, meggers, loop calibrators and other diagnostic equipment. Intermediate knowledge ofSCADA controls. Possess a valid driverslicense with no major infractions. Knowledge of the methods,materials, equipment, and instruments used in the maintenance, repair andcalibration of electrical and electronic control systems. Familiarity with theprinciples and practices of wastewater treatment plant operations and processcontrol. Knowledge of the methods,materials, equipment and instruments used in the maintenance, troubleshooting,repair, and calibration of electrical and electronic control systems including distributed Control Systems (DCS); Programmable Logic Controllers (PLC) or PCbased controls; Graphics human machine interface (HMI) or similar IO devices;Instrumentation communication networks (Ethernet, DeviceNet, ControlNet,Profibus) or similar; Servers, drives, actuators, variable frequency drives(VFDs), valves, etc. Knowledge of related state andfederal laws and regulations Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. Due to the nature of the job passing a Fitness for Dutytesting is required to ensure candidates for this position are physically andfunctionally fit to perform the essential physical work functions of thissafety sensitive position without posing a direct threat to the health orsafety of themselves or others. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The workareas may be indoor, outdoor, have loud noise, active machinery, high pressurefluid systems, electrical equipment, confined spaces, heights and depths,fumes, air borne particles, noxious gases, and chemicals. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Responsibilities: Electrician At , we challenge what iscurrently accepted, so we can shape innovative and lasting solutions fortomorrow. Through the delivery of our operations and maintenance services,youll make it simpler and more seamless for our municipal clients to operatesafely and efficiently, empowering communities to focus on what matters most tothem people. As an Electrician, youll joina collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey at the North Hudson SewerageAuthority, youll have the opportunity to lead a variety of tasks in thepreventive and corrective maintenance on wastewater treatment plants andrelated facilities equipment on an assigned shift. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to challenges that may arise in municipal facilities. Youll performpredictive, preventive, and corrective maintenance on buildings, structures,grounds, machinery, and lighting equipment; lubricate equipment and check formalfunctions; troubleshoot all electrical systems and subsystems, must know howto properly examine equipment failures to identify root cause and to preventrecurrences; plans and installs new equipment upgrades. Comply with all Healthand Safety Practices and Procedures. Most importantly, youlltake actiontoensure the safety, health and well-being of you and your team. Essential Duties andResponsibilities Assists in planning,scheduling the maintenance and repair of a wide variety of specializedmechanical and electrical equipment in a safe manner. Reads, interprets, and worksfrom blueprints, drawings, sketches, plans, specifications, and mechanicalillustrations. Performs skilled electricalrepair work on water/wastewater treatment plant equipment and relatedequipment. Analyzes equipment failures todetermine cause and to prevent recurrences. Assists Project withrecordkeeping and prepares routine and special reports. Provides on-the-job trainingto less experienced employees. Performs preventive andcorrective and predictive maintenance on mechanical and electrical machinery orequipment. Regularly inspects the workingcondition and maintains the cleanliness and safety of equipment and surroundingareas. Assist with review of capitalimprovement project studies, designs, and contract drawings. Forecast material andequipment needs and performs other duties as required. Comments/Special Instructions Electrician I position to workfor at the North Hudson SewerageAuthority in Hoboken, NJ. Work schedule: Monday through Friday 630 AM to 3 PM,after trained will need to be on rotating on call schedule.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must. What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1440B, Newark NJ

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: • Maintain the electrical in the building and facility equipment., • Read and understand electrical schematics and blueprints, • Troubleshoot and wiring equipment, • Supervisor the Maintenance team Previous Experience: • Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe, • Preferred Experience: Wiring electrical enclosures as per schematic given, • Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: • Required: High School diploma, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications Company training will include • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Teamwork and problem-solving skills, • Good verbal and written communication skills, • Efficiency and organization, • Able to speak Spanish helpful

Job Description EAM-Mosca Corp., Hazle Township PA, a dynamic market leader in the area of end-of-line automated packaging machinery and consumable strapping solutions, is seeking a driven Field Service Technician for the Newark, NJ region. EAM-Mosca is privately held and retains a unique, focused, entrepreneurial culture. EAM-Mosca also enjoys a blue-chip client base of highly successful North and South American manufacturing companies and has a portfolio of products applicable to a variety of end-use markets. The key to the ongoing success of the business is a system-based product portfolio featuring standard as well as custom engineered packaging machinery solutions and a superior consumable packaging product, complimented by quality technical service and readily available aftersales parts support. The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. The Field service techs responsibilities include: • Install, Commission, equipment in a manner that ensures reliability and high customer satisfaction., • Perform preventative maintenance, Predictive Maintenance, Emergency repair on all EAM equipment., • Troubleshoot mechanical and electrical systems utilizing systematic thinking while employing test equipment and hand tools to discover faults and develop plans to report, plan and execute the planned solution., • Ability to work closely with Mosca Engineering to provide the highest level of customer service., • Generate service reports that explain the work provided, parts provided and clear understanding of the issue, the solution, and any follow up needed. All done in a timely and professional manner., • Communicate daily with the area service managers and develop schedules and travel itineraries that meet the needs of our customers and provide ample time to preform the work requested., • Advance understanding of machines and their systems to include but not limited to pneumatic, hydraulic, bearings, levers, channels, pulleys, cams, and camshafts, • Basic experience with Control systems utilizing Allen Bradley, Siemens and B&R PLC’s, • Electromechanical experience with conveyance systems, understanding sensors, electric motors and how they interact., • Able to use a multimeter, perform point to point, read electrical schematics and trace, • Able to use and read Calipers micrometers., • Able to take initiative and work independently on a regular basis, • Able to communicate clearly and professionally through both written and verbal medias: Web based service reporting, Video conferencing and face to face interactions., • Able to travel extensively within the U.S. Monday thru Friday. (80%) Team, Training and Support • In-house training with continuous on the job field training with senior field staff, • Company car, • Corporate expense account / credit card, • Company laptop and cell phone, • All required Personal Safety Equipment, • Company logoed clothing, • All supporting parts inventory needed for equipment maintenance, • Company supplied tools Experience and education • Minimum 3 years of field or plant equipment maintenance experience., • Corrugated Industry experience a plus, • Mechanical understanding of strapping machines, Mosca preferred, • High school diploma, • A valid driver's license, • Solid Mechanical / Electrical background, • PLC experience preferred, • Associates Degree a plus Excellent Pay and Benefits package • Medical, Dental and Vision benefits, • 401(k) retirement savings program, • Paid vacation and holidays, • Life Insurance, • Employee assistance programs EAM-Mosca is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Powered by JazzHR hETBJmFbMt

Job Description The Service Technician is accountable for troubleshooting malfunctioning or disabled automated, anti-vehicular barrier and bollard equipment to determine root cause of malfunction or failure and taken appropriate action to return the equipment to operational condition. The Service Technician is accountable for performing preventative maintenance procedures on same equipment as detailed by the original equipment manufacturer. The Service Technician is accountable for providing oversight of equipment installations and commissioning same equipment for proper initial customer utilization Essential Accountabilities: • Troubleshoot to root cause and repair customer’s barrier, gate and bollard equipment to ensure product performs as intended on a reliable basis utilizing only approved replacement parts, • Perform detailed and comprehensive preventative maintenance procedures on customer’s barrier, gate and bollard equipment as recommended by original equipment manufacturers, • Complete all preventative maintenance checklists, service tickets and time sheets completely and accurately; forward to office, administrative staff within 24 hours of performance of work, • Provide detailed estimates of required repairs when requested by customer representative to facilitate expense approval process, • Provide comprehensive and detailed assessment to Service Manager and Sales Manager of equipment that has reached end of life and should be replaced; provide similar feedback to customer representatives and notate on service tickets, • Oversight of an equipment installation ensuring all requirements of drawings and specifications have been met and/or satisfied, • Receive and Respond to Requests Equipment Maintenance and Repair, • Arrive at Service Office every day in preparation for day’s assignment unless directed otherwise, • Turn-in previous days paperwork including service tickets, timesheets and parts request forms and replace components, • Engage Service Manager, Service Coordinator or Lead Technician for review of day’s service call-outs and scheduled PMs, • Advise leadership of any gaps in capabilities due to parts or equipment required for specific call-outs or PMs, • Ensure assignments include point-of-contact, POC, for given facility, • Load up service vehicle with any required parts or resources not already on hand in service vehicle, • Proceed to customer site, • On call requirement for emergency repairs (rotation schedule is set up between the technicians for emergency repairs that are requested on weekdays after regular schedule hours and/or during weekends), • Initiate Customer Engagement, • Upon arrival on site ensure adequate, legal parking is provided or advise customer and office of inadequate parking, • Make initial contact with provided POC or their agent, • Confirm nature of service call, equipment detailed in call-out and working restrictions/times with POC, • Proceed to equipment site(s), • Execute Service or Repair Procedures, • Assess equipment behavior for repair needs or prepare fresh copy of PM checklist, • Effect repairs or perform preventative maintenance procedures, • Fill out PM checklists as procedures are executed, • Review all basic equipment functions to ensure equipment is returned to customer control in proper working order, • Make list of additional needs if required parts or tools/resources are not available and second call is required, • Complete Paperwork and re-engage POC, • Complete service ticket and/or ensure PM checklists are properly completed, • Review executed activities via paperwork with POC, • Gain POC signature on Service Ticket and legible printout of POC name, • Leave copy with POC or advise POC when copy will be forwarded, • Provide Oversight and Commissioning at a New Equipment Installation, • Ensure third party partners, suppliers or contractors have installed equipment per drawings and specifications., • Identify and communicate in installation details that are not per same drawings and specifications to third parties and leadership staff, • Commission new equipment installation via verification of all system functionality and designed and specified via site specific sequencing and execution parameters, • Report any details of functionality that does not conform to site specific requirements to Engineering and Leadership personnel, • Validate corrective action rectifies shortfall previously communicated Key Performance Parameters and Metrics: • Execute service calls in timely manner in line with existing labor standards, • Turn in all paperwork within 24 hours of performance of work without exception, • Advise Service Leadership of possible improvements to products, processes or work procedures, • Provide feedback to Service and Sales Leadership of possible equipment replacements, • Installation oversight effectively guarantees conformance to all drawings and specifications, • Equipment commissioning demonstrates comprehensive equipment conformance to intended sequencing, • Required Knowledge, Skills, and Abilities:, • Must be able to troubleshoot and repair hydraulic and electromechanical equipment including electric and electronic controls, • Must have baseline understand of electrical principals such as Ohm’s Law and how motors function, • Must have baseline understanding hydraulic principals such as force multiplication, pressure, volume and cavitation, as well as, how pumps, valves and accumulators function, • Must understand basic operating principals of programmable logic controllers and variable frequency drives; must be able to revise functional parameters of variable frequency drives, • Must have basic understanding of how vehicle detection loops function and how to troubleshoot loop/loop detector failures, • Must have good verbal skills and be able to interface directly with customers to explain basic equipment function, repair and maintenance procedures and a sequence of operation, • Must have good written communication skills to complete necessary paperwork for business execution including timesheets, service tickets and parts request forms; handwriting must be legible, • Must be able to utilize basic computer and tablet software for equipment interfacing and paperwork in lieu of hand written pieces, • Must be able to lift 50 lbs. or more repeatedly, • High School Diploma, • Minimum 3-5 years field service experience in electrical, hydraulic or mechanical machine repair, • Computer training preferred, • Electrical training/PLC/VFD training preferred, • Previous experience reading and interpreting civil and electrical drawings to confirm proper conformance Traits/Competencies required • Good Communication Skills, • Self-motivated and able to manage time, • Attention to detail, • Troubleshooting skills/fault isolation and identification, • Moderate Electrical Aptitude, • Moderate Mechanical Aptitude, • Moderate Hydraulic Aptitude, • Basic Civil Engineering Aptitude, • Competency reading basic civil and electrical drawings and validating conformance Job Location Kearny, NJ

National Express LLC (NELLC) is the North American subsidiary of National Express Group, PLC, one of the premier transportation firms in the United Kingdom.National Express School (NEXS) is the home-to-school division of NELLC, which operates more than 22,500 school buses, serves more than 550 schoo

The Associate Client Advocate (ACA) owns client service activities and client engagement in those activities through daily coordination with an assigned Client Specialist in our Global Service Delivery (GSD) Team. The primary responsibility of the Associate Client Advocate is to provide an exception

Ensures all HAZMAT and Driver documents are complete and filed * Function in a fast-paced and dynamic environment and takes initiative to get things done efficiently and effectively * Monitors shipping efficiency and resources to make sure customers are satisfied * You will train the Distribution Te

Job Responsibilities * Ensure all safety rules are followed * Set production goals and expectation * Ensure proper housekeeping of the plant * Analyze scorecards and production reports * Oversee yard/warehouse personnel * Hire, train, promote and discipline employees * Adjust employee s

To qualify for this position you need to have experience with Panel Wiring, PLCs. Please include a description of your PLC, Controls, Electronics, and Panel Wiring experience on your resume.

Job Responsibilities Ensure all safety rules are follow Production Supervisor, Night Shift, Production, Financial Planning, Supervisor, Mechanical, Manufacturing, Retail. With safety as a primary responsibility, this Supervisor is responsible for supervising overall plant operations, maintenance and

Job DescriptionProvides administrative and secretarial support for the vice president and department. RESPONSIBILITIES • Monitors and oversees facility operations for a large biotech site., • Troubleshoots and performs repairs on system issues involving electronic, electrical, pneumatic, hydraulic, and mechanical devices, Johnson Controls Metasys BMS, utility, and water systems., • Supervisor in charge of facility housekeeping staff for second shift., • Generates work orders in SAP, participates in site emergency response and Hazmat activities. Novartis Pharmaceuticals 01 Sep 2005 - 01 May 2014 ENGINEERING TECHNICIAN 1216 5th Avenue New York NY , 10029 OK to contact this employer? - No RESPONSIBILITIES • Repaired, maintained, and calibrated pharmaceutical manufacturing, production and packaging equipment.

RE&WS Global Safety & Security Director.Assess, enhance and maintain the Corporate Safety & Security Program to align and support the specific demands and requirements within the specific region(s).Identify protection goals, objectives and metrics consistent with best practices and corporate objecti

Healthcare Financial/Actuarial Associate Director.As a Healthcare Financial/Actuarial Associate Director, you will be a key member of the Financial, Actuarial and Analytics (FAA) Community of Expertise.You will lead financial and actuarial engagements for a portfolio of clients and play a strategic

To find out more about our Total Rewards package, visit Work Life Balance | Prudential Careers. United States is not affiliated with Prudential plc. Prudential is an equal opportunity employer.

As a Health and Benefits Associate you will contribute to a wide variety of projects involving the design, financing and ongoing management of the full spectrum of health and benefit programs.You will support the project manager on select projects, interface with vendors and key clients internally a

Senior Associate - Health and Benefits.As a Health and Benefits Senior Associate, you will be a key member of the client service team, engaging directly with clients and establishing relationships across all levels of the client organization.You will substantially contribute to the management of pro

Health and Benefits Lead Associate.As a Health and Benefits Lead Associate you will contribute to a wide variety of complex projects involving the design, financing and ongoing management of the full spectrum of health and benefit programs.You will serve as the project manager on select projects, in

Job DescriptionYummy Açaí – Maintenance Technician (Industrial / Manufacturing)Elizabeth, NJ 1st Shift – 7:00 AM to 3:30 PM Full-Time - Food Manufacturing Environment About the Role:Yummy Açaí is seeking a knowledgeable and hands-on Maintenance Technician to support our Acai production plant. This role is essential to ensuring equipment reliability, safe operations, and continuous improvement across our facility.Our facility uses a variety of food-processing equipment including industrial mixers, pouch fillers, cooling systems, and blending machinery. Experience with these systems is a strong plus.The ideal candidate has strong mechanical aptitude, experience in industrial maintenance, and familiarity with food processing equipment. Knowledge of HVAC and electrical troubleshooting is highly preferred. Key Responsibilities:Equipment & Facility Maintenance • Inspect, test, clean, and monitor machinery and production equipment., • Diagnose equipment malfunctions, perform troubleshooting, and complete timely repairs., • Disassemble and reassemble equipment, replacing defective or worn parts., • Perform preventive and predictive maintenance tasks on production lines, utilities, and facility systems., • Maintain accurate records of maintenance activities and downtime.Technical & Safety Support, • Work alongside the Maintenance Manager/Supervisor and cross-functional teams (Operations, Sanitation, QA)., • Address equipment, safety, or facility issues promptly to support a safe, compliant production environment., • Assist with continuous improvement projects related to equipment upgrades, efficiency, and reliability., • Follow all GMP, food safety, and sanitation requirements when working in production areas.Compliance & Documentation:, • Understand and follow maintenance SOPs and safety procedures., • Support audit readiness by keeping maintenance logs and equipment documentation up to date.Required Skills & Qualifications:, • Experience maintaining industrial food-processing mixers, ribbon blenders, paddle mixers, or other blending systems (strong plus)., • Ability to troubleshoot and repair mixing motors, gearboxes, shafts, seals, pumps, and blending components., • High School Diploma; trade school or technical certification in Industrial Maintenance, HVAC, or Mechanical Systems preferred., • 3+ years experience as a Maintenance Mechanic/Technician in a manufacturing environment (food manufacturing preferred)., • Strong mechanical aptitude; able to use hand and power tools, welding equipment, and basic machine shop tools., • Ability to mentor or train entry-level technicians., • Knowledge of state and local safety requirements related to refrigeration systems., • Ability to interpret:, • Electrical schematics, • Motor control diagrams, • PLC ladder logic (basic understanding acceptable), • Pneumatic and hydraulic diagrams, • Experience with:, • Basic electrical troubleshooting, • Plumbing repairs, • Welding / fabrication, • Refrigeration or HVAC systems (highly preferred), • Experience with preventive maintenance programs.Work Schedule & Requirements:, • 1st shift (7:00am–3:30pm), with ability to work occasional overtime, weekends, or emergency call-ins., • Ability to work in cold environments (production and freezer areas)., • Must follow GMP, food safety, and sanitation requirements.

Job DescriptionPosition Summary We are seeking an experienced Maintenance Mechanic to perform preventive maintenance, troubleshoot, and repair industrial machinery and facility systems. This role ensures minimal downtime and supports production efficiency through hands-on technical expertise. Key Responsibilities • Perform preventive and corrective maintenance on mechanical, hydraulic, pneumatic, and electrical systems., • Diagnose and repair equipment malfunctions promptly to minimize downtime., • Assist in installation, alignment, and calibration of new machinery., • Read and interpret blueprints, schematics, and technical manuals., • Operate tools and diagnostic equipment safely and effectively., • Maintain accurate maintenance records and manage spare parts inventory., • Follow all OSHA and company safety standards, including Lockout/Tagout procedures.Qualifications, • High school diploma or equivalent, • 2–5 years of experience in industrial maintenance or related field., • Strong knowledge of mechanical systems, hydraulics, pneumatics, and electrical troubleshooting. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rutherford,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Regional EHS Manager - Northeast.Eaton's Engineering Service & Systems division wants to help you fuel your career! Eaton has the largest and most experienced team of field services technicians and engineers in the industry.This team brings extensive skills and experiences to field service engineeri

We have a fantastic opportunity to join Sanderson Design Group Inc as a Sales Support Manager, you'll be at the heart of our dynamic US team, passionate about delivering outstanding customer service and acting as the key connector between internal teams, the UK central office, and valued customers.I

We have a fantastic opportunity to join Sanderson Design Group Inc as a Sales Support Manager, you'll be at the heart of our dynamic US team, passionate about delivering outstanding customer service and acting as the key connector between internal teams, the UK central office, and valued customers.I

Field Technician Automated Blow Molding - East Orange, NJ Travel to customer worksites and install & maintain a wide variety of Blow Molding Solutions.Convey necessary information for the proper use of new machinery.Use available resources and experience to identify malfunctioning mechanical, pneuma

Oracle HCM Cloud Implementation Project Manager Newark, NJ Hybrid We are seeking a talented and experienced Oracle HCM Cloud Implementation manager.Responsibilities: Hands on experience in multiple Full Life Cycle implementations of the Oracle HCM Cloud (Fusion) product, from planning through design

Hello, We are hiring Junior project manager for our client, if you are interested, please send your resume to : Salary: 45k/Year Location: Remote (EST) Duration: Longterm Summary: The Junior Project Manager supports the successful delivery of the project by coordinating tas