Trabajos plc en Perth Amboy, New JerseyCrear alertas

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Maintenance Mechanic - Dayton, NJ Shift: 3rd Pay: $35.39/hr-$40.31/hr (based on experience) How you will impact WestRock: • Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gages and test equipment., • Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment., • Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements., • Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components., • Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved., • Maintains company-required performance and maintenance records for identified equipment., • Performs preventive maintenance functions as directed., • Assists maintenance personnel with technical troubleshooting., • Assists and trains other maintenance and/or other technical level employees., • Must be educationally certified through a tech or trade school beyond High School, • Must be highly safety conscious., • Proven experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields are required and the ability to demonstrate high proficiency in these areas., • A thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes., • Willing to work any shift and overtime as required., • Computer experience/operation and PLC programming are necessary., • High degree of precision working with minimum tolerances required., • Ability to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work., • Must be willing to obtain High Pressure Black Seal boiler operators license after probationary period The starting range is $35.39/hr-$40.31/hr depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 12 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ___ and the application window is expected to close by 3/24/26 #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

We are hiring an Electrical Planner for our Rahway, NJ site. This is an on-site opportunity supporting electrical maintenance and installation activities in laboratory areas. This role functions as the technical planning lead for electrical work. Responsibilities include managing work orders in SAP, creating detailed job plans, coordinating procurement of parts and materials, supporting execution with maintenance teams, and serving as the site SME for electrical systems. The ideal candidate brings strong planning discipline, technical electrical knowledge, and the ability to coordinate across supervisors, engineers, and crafts. Key qualifications: • 10+ years of electrical maintenance or installation experience, • 2+ years in planning or coordination, • Experience with SAP or another CMMS platform, • Strong knowledge of electrical distribution, motor controls, PLC I/O, lighting, grounding/bonding, conduit/cable routing, and safe electrical work methods, • Ability to build job plans, manpower estimates, and material lists, • Working knowledge of NFPA, NEC, and site safety standards, • Pharmaceutical, laboratory, or regulated facility experience preferred, • Journeyman electrician license, trade certification, or equivalent strongly preferred Location: Rahway, NJ Work setting: On-site Compensation: $115,000–$130,000

Title Electrical Controls Engineer/Industrial Electrician Report to Facility/Engineering Director. Job Summary Individual must be able to perform design,engineering, and field start up responsibilities for System Integration in the Electrical Controls Industry. In addition, proven trouble shooting skills are necessary. Job Duties / Responsibilities • Design, fabricate, and install PLC based process control panels., • Troubleshoot and upgrade existing control panels., • Maintain inventory of all PLC/HMIrack systems and programs., • Work to install110V, 220V, and 480V 3 phase wiring., • Real electrical schematics and wiring diagrams., • Be able to troubleshoot 480V electrical control systems., • Specify wiring and motor controls for 480V systems., • Install power distribution and protection systems., • HMI Interfaces, • Temperature Controllers and Transmitters, • Pressure Transmitters, • 4-20ma Loop Controllers, • Burner Controllers and Actuators, • Industrial pH Meters, • Level Transmitters, • Flow Meters, • Variable Frequency Drives Work Conditions • Physically available to lift up to 50lb., • Exposure to hazardous conditions associated with the Company, • 24/7 availability may be required., • Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time, • Overtime as needed. Job Requirements • AS, BSEE, BSEET, or technical degree., • 3-5 years of industry experience., • Review projects including quotes, job specifications, and resolve any quote to job specifications differences., • System Architecture including non-standard material and control pane lpower requirements/distribution., • Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work., • Material responsibility includes advance material order, specifying Mod Box material, specifying Panel material, writing Mod Box EBMs and writing panel material EBMs., • Assisting with installation • Debugging with no additional support • Launchand Standby, • As Builts Technology Requirements • RSLogix 5, 5000, • RS Networx for DeviceNet, ControlNet, EtherNet IP, • DriveExecutive, DriveExplorer, • PanelBuilder PDS, 1400e, 32, • RSView Studio, • Trouble Shooting PID Loops, • Calibrating Process Control Equipment, • Microsoft Office Suite Benefits • Competitive Compensation • 401(k) • 401(k) Matching, • Medical, Dental,and Vision Benefits, • Paid Time Off and Paid Holiday’s Classification Full Time Position

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, Monday - Friday, job stability, and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels. Diagnose control circuit failures using schematics and electrical prints. Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required) Verify proper operation of safety circuits, interlocks, E-stops, and guarding systems in accordance with OSHA and NFPA standards. Mechanical Systems: Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment. Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications. Fabricate or modify components as required to support repairs and equipment improvements. Steam & Boiler Systems: Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping. Support safe operation of boiler and thermal systems in compliance with applicable codes and permits. Identify steam-related inefficiencies and failures that impact production, safety, or energy usage. Plumbing, Hydraulics & Pneumatics: Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping. Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors. Identify pressure, flow, or contamination issues affecting equipment performance. Welding & Fabrication: Perform MIG/TIG/Stick welding to support equipment repair and improvements. Maintenance Systems & Documentation • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities. High School Diploma or GED 3 or more years mechanical maintenance experience in an industrial manufacturing environment. Demonstrated knowledge of mechanical equipment, troubleshooting & repair, and safe work practices. Experience working in production environment. Be able to read building and electrical schematics. Basic math skills along with excellent organizational and decision-making skills. Must be able to work independently and efficiently in an often fast-paced environment. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND1

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Job Description: We are hiring Maintenance Technicians at multiple skill levels (A, B, and C) for our facility in [Location]. These roles offer a great opportunity for candidates with different levels of experience in industrial maintenance, troubleshooting, and equipment repair. Responsibilities (Vary by Level): Tech A: Lead complex maintenance projects, supervise techs, and perform advanced troubleshooting on electrical, mechanical, hydraulic, and pneumatic systems. Food manufacturing experience is required. Tech B: Troubleshoot automation systems, electrical/mechanical components, and assist with preventive maintenance. Food manufacturing experience is a plus. Tech C: Perform routine maintenance, assist in troubleshooting, and support facility operations. Food manufacturing experience is nice to have but not required. Qualifications: Tech A: 3+ years of food manufacturing maintenance experience, PLC troubleshooting, supervisory skills. Tech B: 3+ years in industrial maintenance, experience with automation and controls. Food manufacturing experience is preferred. Tech C: High school diploma/GED, & 1+ years in industrial maintenance, mechanical aptitude, willingness to learn. Food manufacturing experience is a plus but not required.

Electrician | Edison, NJ | Starting Pay $37.58 per hour Join Silgan Containers, America's largest metal food packaging producer, as an Industrial Electrician in Edison, NJ. We're looking for skilled electricians to troubleshoot, maintain, and repair electrical systems in a fast-paced manufacturing environment. What We Offer • Pay: Starting at $37.58 per hour plus shift differential for 2nd and 3rd shifts, • Consistent Wage Increases, • Comprehensive Benefits: Medical, dental, vision, prescription coverage, life insurance, • Specialty Programs: Pet insurance, health programs for diabetes, hypertension, and more, • 401(k) with Company Contributions, • Paid Time Off & Holidays, • Training & Tuition Reimbursement, • Company-Paid Uniforms & Prescription Safety Glasses, • Safety Shoe Allowance, • Commitment to Safety: "Drive to Zero Injuries" initiative, • Sustainability Leadership: Edison is Silgan's first facility with on-site solar power What You'll Do • Troubleshoot, maintain, repair, and modify electrical systems, • Investigate mechanical, operational, and electrical issues and take corrective action, • Perform maintenance, wiring, and installation of motors, switches, fuse boxes, lighting, and power circuits, • Create and maintain up-to-date layouts of electrical circuits, • Work with Allen Bradley systems, VFDs, PLC hardware/software, AC/DC circuits, 4-20 mA circuits, and 440 MCCs What We Need • High School Diploma or GED - Trade school certification preferred, • 3+ years of experience as an electrician in a manufacturing environment, • Ability to read and interpret blueprints, schematics, and technical manuals, • Strong troubleshooting skills and knowledge of industrial electrical systems About Silgan Containers We are the largest metal food packaging producer in North America, committed to sustainability and innovation. From increasing recycled content to renewable energy initiatives, we're rethinking how to make the metal food can. Ready to start your career as an Industrial Electrician in Edison, NJ? Apply today and join a team that values safety, growth, and innovation. LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an "at-will" basis. Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug-free workplace.

Experience with PLC troubleshooting and industrial equipment.

Perform preventative maintenance and respond to emergency repairs. Experience with PLC troubleshooting and industrial equipment.

The Transportation Supervisor is responsible for leading and controlling activities of branch warehouse personnel assigned to the Transportation Department. Responsible for managing the maintenance and repairs of all transportation-related equipment. Five or more years of experience managing the tra

Job DescriptionAbout UsWe are a rapidly growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. As we expand into a new facility, we’re hiring a hands-on Electrical & Mechanical Technician who can keep production running by physically troubleshooting, repairing, and maintaining machines on the floor. This is a full-time, first-shift role (7:30 AM–around 5:00 PM). This position is for someone who’s most comfortable with tools in hand and panels open—tracking down failures, replacing components, rebuilding assemblies, and getting equipment back online quickly and safely. You’ll work on conveyors, motors, pumps, sensors, pneumatics, and automated equipment, and you’ll also handle electrical troubleshooting across 120V/208V/240V/480V systems. PLC/VFD familiarity is important, but the core need is a technician who can fix what’s broken and prevent it from breaking again. Electrical license/certification is a plus. Job SummaryWe’re seeking an experienced Electrical & Mechanical Technician to support day-to-day production by diagnosing issues, repairing equipment, and performing preventive maintenance. You will be the person who responds when a line is down—locating the fault, repairing or replacing the failed part, verifying safe operation, and documenting the fix. You’ll work closely with operations and maintenance to improve reliability, reduce downtime, and keep equipment operating safely and consistently in a food manufacturing environment. The ideal candidate is practical, calm under pressure, and confident working independently on mechanical and electrical repairs in a fast-paced facility. Responsibilities • Diagnose, troubleshoot, and repair electrical and mechanical issues on food manufacturing equipment., • Work with PLCs, VFDs, motors, sensors, and automation controls to maintain and improve production efficiency., • Perform electrical installations, modifications, and upgrades for systems operating at 120V, 208V, 240V, and 480V., • Ensure compliance with all applicable electrical codes, safety standards, and best practices., • Collaborate with cross-functional teams to implement new machinery and automation projects., • Maintain detailed maintenance records and electrical schematics., • Provide technical support to production and maintenance staff., • Assist in developing preventive and predictive maintenance programs for electrical and automation systems. Qualifications • Bachelor’s or Master’s degree in Electrical Engineering or equivalent technical training with relevant manufacturing experience., • Strong knowledge of industrial electrical systems and codes, including 120/208/240/480V applications., • Hands-on experience with PLC programming, troubleshooting, and integration., • Familiarity with VFDs, motors, conveyors, packaging machinery, and related food manufacturing equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Electrical license or certification strongly preferred., • Strong organizational and problem-solving skills., • Ability to multitask and prioritize in a dynamic production environment.

Job Description POSITION SUMMARY: The Maintenance Mechanic is responsible for keeping machinery and equipment used in an industrial environment operating effectively. This position is an essential part of the success of the business, and requires proactive thinking to evaluate equipment and diagnose and repair potential problems before critical failure. You will be required to use your acquired mechanical and electrical skills, as well as seeking information from others to find and implement the best possible solutions to keep machinery and equipment in top notch condition and running efficiently as possible. The Mechanic is expected to diagnose issues and deliver solutions. This position requires ability to think and reason, initiative to move forward to complete tasks in a timely manner with minimal guidance, and conduct all business dealings in a professional manner at all times. ESSENTIAL FUNCTIONS: § Inspect machines and equipment regularly for signs of potential malfunctions, including visual inspections, listening for irregular noises, and other preventative measures. § Daily communication with machine operators asking if they are experiencing and issues or irregularities with their equipment. § Recommend Preventative Measures and Activities for routine inspection that will help reduce the risk of equipment failure. § Perform emergency repairs safely and with a sense of urgency. § Utilizing your experience, be a Champion for Safety, bringing awareness and implementing improvements to keep all coworkers safe. Practice safe work habits by using proper and required Personal Protective Equipment (PPE) at all times, and reminding coworkers if necessary. § Prioritize work schedule by understanding the criticality and sense of urgency of the tasks at hand, and communicate with appropriate supervisors and managers to make sure the most urgent tasks are being performed first. § Always maintain a clean work area. Work urgently but safely and with care, following all GMP and Safety Guidelines. § Work in a Professional Manner with all coworkers and team members, treating everyone with respect and dignity at all times. § Utilize CMMS to manage Maintenance Work Orders, Inventory, and Equipment. Complete and generate Work Orders daily. Complete Parts Requisitions and Parts Removal Transactions for all Parts removed from stock. § Complete all Regulatory and Required Paperwork in a timely manner as required. § Complete all Reports and Recordkeeping Documents as requested. Above is not a complete list, but rather a highlight of some of the important tasks required of the position. Other tasks may be required of this position, and will be expected to be performed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be required to: § Work near moving mechanical parts. § Reach with hands and arms. Sit and/or stand for long periods of time (8 hours) § Utilize a Computer Monitor/Screen for long periods of time (8 hours) § Climb or balance utilizing ladders, aerial lift equipment. § Lift and/or move up to 50 pounds. § Push and pull up to 100 pounds. Given the operation of various types of moving equipment used in the facility, adequate communication and observational skills are required, including seeing, speaking and hearing. WORK ENVIRONMENT Job will generally be performed in the manufacturing plant. When on the plant floor it is representative of a large, busy manufacturing operation. Noisy, active, objects on the floor, constant movement and traffic flow of motorized equipment. Hair net, beard net, assigned work uniform, protective eye wear and gloves are among the GMP required apparel that must be worn, if indicated, on the plant floor. REPORTING RELATIONSHIPS: This position reports to the Manufacturing Engineering Manager Critical Operating Relationships: Maintenance Staff Operations Personnel QUALIFICATIONS: Education: Must have a High School Diploma or GED, Advanced technical or college training preferred. Experience: Strong Mechanical and Industrial Experience background. 3+ Years in an Industrial Mechanic position KNOWLEDGE, SKILLS AND ABILITIES: § Experience with basic Industrial Electricity, able to trace and identify electrical sources and identify voltage. Experienced changing Motor, Contactors, Starters, Relays, and other electrical components frequently used in an industrial environment. § Knowledge and basic understanding of PLC’s, VFD’s, and Servo Motors. § Experience with Pneumatic and Hydraulic systems, including understanding of basic system components. § Basic Welding Skills § Basic Plumbing Skills § Must be able to read Technical Manuals and Mechanical and Electrical Drawings/Schematics. § Proficient in the use of hand and power tools commonly found in typical maintenance shops. § Experience of Safe Work Practices of an Industrial Mechanic. Familiarity of OSHA safety standards and regulations. § Must be able to use a Personal Computer and use Internet, Mail, and have basic MS Excel and Word skills. § Excellent written and verbal communication skills. § Excellent Organizational Skills. § Must be able to stand for 8 hours, able to lift heavy objects (50 lbs), use ladders and work from heights, work in tight and/or awkward spaces, work in extreme hot or cold conditions. § Must be able to conduct business in a professional manner with internal and external contacts. § Must have a valid Driver’s License. ACKNOWLEDGMENT § The essential job functions of the job for which you are applying are included in this document. Are you able to perform each essential job function listed above in a safe and reasonable manner? Yes _____ No _____ If not, is there any accommodation that would enable you to perform these functions? Please explain: ADDITIONAL TECHNICAL EXPERIENCE • Strong safety awareness and adherence to GMP, OSHA, and facility safety protocols., • Experience operating, troubleshooting, and maintaining tablet press machinery., • Experience with encapsulation machines, including setup, changeovers, and mechanical adjustments., • Knowledge of coating equipment and related process parameters., • Blender operation and maintenance experience, including V-blenders, ribbon blenders, or similar equipment. ADVANCED TECHNICAL DETAILS • Proficient in diagnosing tablet press issues such as weight variation, compression force imbalance, ejection problems, and punch/die wear., • Experience performing punch and die installation, alignment, lubrication schedules, and monitoring tooling life cycles., • Ability to troubleshoot encapsulation machines including vacuum systems, dosing disk alignment, rectifier timing, and capsule separation issues., • Familiarity with coating pan operation parameters including spray rate, exhaust flow, bed temperature, droplet size, and pattern uniformity., • Skilled in blender preventive maintenance including bearing replacement, agitator shaft alignment, gear reducer inspection, and load testing., • Understanding of dust collection systems, HEPA filtration units, and air handling requirements for tablet and capsule manufacturing., • Experience calibrating pressure gauges, torque settings, load cells, thermocouples, and other process sensors., • Ability to troubleshoot PLC-controlled equipment, interpret ladder logic, and perform minor programming edits when required., • Knowledge of lubrication methods (grease, oil, food-grade lubricants) and maintenance of lubrication distribution systems., • Experience in conducting root cause analysis (RCA) for recurring mechanical failures and implementing corrective actions. SPECIFIC EQUIPMENT QUALIFICATIONS • Tablet Press: Setup, turret removal/installation, punch lubrication, feeder adjustments, compression roller inspection, and resolving tablet defect issues such as capping or lamination., • Encapsulation Machines: Timing adjustments, vacuum troubleshooting, dosing system rebuilds, rectifier alignment, and resolving capsule body/cap separation issues., • Blenders: Preventive maintenance on V-blenders, double-cone, and ribbon blenders including seal replacement, gear reducer service, and verifying blender rotation timing., • Coating Equipment: Spray gun calibration, pump maintenance, exhaust airflow balancing, and troubleshooting coating defects such as roughness or poor adhesion. · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job Description Field Service Engineer SGM Magnetics - Lifting Division Position Summary The Field Service Engineer is responsible for hands-on commissioning, inspecting, troubleshooting, upgrading, and supporting SGM lifting magnet systems installed on overhead and outdoor cranes. This role requires frequent travel to customer facilities, primarily within heavy industrial and steel mill environments, and close coordination with the Engineering and After-Sales Departments in Italy. The position demands strong electrical and controls expertise, the ability to work independently in autonomous field conditions, and the professionalism required to represent SGM directly to customers. Key Responsibilities • Travel up to 60% of the time to customer facilities across the United States and Canada to:, • Commission new lifting magnet systems, • Perform inspections and preventative maintenance, • Execute system retrofits and upgrades, • Diagnose and resolve electrical, mechanical, and control-related issues, • Commission, test, and inspect high-voltage and low-voltage electrical systems installed on overhead cranes and outdoor cranes., • Troubleshoot and modify PLC-based magnet control systems, including:, • Hardware and software diagnostics, • Do program updates and ladder logic verification, • Understand and troubleshoot complete magnetic lifting devices, including:, • PLC and electromechanical controllers, • Industrial communication networks (Ethernet, DeviceNet, Profibus, Profinet), • AC/DC drives, • Battery backup systems, • HMI systems and wireless control network components, • Perform programming and troubleshooting using platforms such as:, • RSLogix 5000, • Studio 5000, • FactoryTalk View, • TIA Portal, • Other industrial control software tools, • Deliver customer training on system operation, safety procedures, troubleshooting, and best practices., • Interpret electrical schematics, wiring diagrams, and technical documentation to support commissioning and service activities., • Generate detailed service, commissioning, and inspection reports, including:, • Electrical measurements and troubleshooting, • Root cause analysis, • Corrective actions, • Photographic documentation, • Technical recommendations, • Maintain organized documentation of manuals, reports, drawings, and project-related files., • Coordinate technical clarifications and troubleshooting efforts with the Engineering Department in Italy., • Ensure strict compliance with safety standards, including work in steel mill environments, use of aerial lifts, and adherence to site-specific safety procedures. Work Environment and Physical Requirements • Comfortable working at heights and driving aerial lifts, • Stand and/or walk during shifts lasting up to 10 hours, • Work flexible schedules including weekends, nights, and holidays as required, • Operate in environments with varying noise levels, • Lift up to 50 pounds, • Frequently push, pull, squat, bend, reach, and climb stairs when applicable, • Work in heavy industrial and steel mill environments Required Qualifications • Bachelor's Degree in Mechatronics, • Willingness to relocate to the United States, • Strong knowledge of electrical systems (high and low voltage), • Knowledge working with PLC and PC-based control systems, • Knowledge in industrial communication protocols (Ethernet/IP, DeviceNet, Profibus, Profinet), • Knowledge working with HMI systems and/or other control network components, • Ability to read and interpret electrical drawings and technical documentation, • Strong verbal and written communication skills, • Excellent customer service and interpersonal skills, • Ability to work independently in an autonomous environment, • Willingness to travel up to 60% Compensation and Benefits • Starting Salary: $55,000 USD per year, • 6-Month Performance Review: Increase to $60,000 USD per year, • Housing: SGM will provide housing for two months during apartment search, • Benefits: United Healthcare (Medical, Dental, Vision, Life AD & D) paid by company, • SGM 401(k) Profit Sharing Plan, • Vacation and Paid Holidays, • TN Visa: SGM will assist and cover fees for TN Visa processing, • Relocation: SGM will cover flight to the U.S. and shipping of personal belongings (excluding vehicle and furniture) Company DescriptionSGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.SGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.

Job Description Technical Source is seeking a Senior Automation Engineer / Project Manager to support a major pharmaceutical manufacturing client in Rahway, New Jersey. This role will focus on the automation design, integration, commissioning, and qualification of facility and clean utility systems, including Building Automation Systems (BAS), Environmental Monitoring Systems (EMS), and Purified Water distribution within a GMP manufacturing environment. This individual will work as part of the Capital Project Automation Delivery Team, supporting expansion projects and ensuring automation systems are implemented, tested, and qualified in compliance with GMP, data integrity, and site automation standards. Responsibilities • Support design, configuration, integration, and commissioning of facility automation systems, • Lead automation efforts for BAS, EMS, and Purified Water systems, • Partner with Engineering, Facilities, CQV, Quality, IT, OEM vendors, and system integrators to deliver automation solutions, • Participate in design reviews and system implementation activities, • Develop and execute automation validation and qualification protocols, • Support system testing, troubleshooting, and commissioning activities, • Ensure systems meet GMP compliance, validation, and data integrity standards, • Review and develop logic narratives and automation control strategies, • Interpret P&IDs, electrical schematics, and mechanical diagrams, • Support startup and qualification activities for capital expansion projects, • Bachelor's degree in Engineering, Science, or related discipline, • 7+ years of experience in automation within a biopharmaceutical or pharmaceutical GMP environment, • Hands-on experience with Siemens Building Automation Systems (BAS), • Strong experience with facility and utility automation systems, • Experience with PLC, HMI, and SCADA platforms, • Demonstrated experience writing and executing validation documentation including:, • Configuration Specifications (CS), • Functional Risk Assessments (FRA), • Automation Installation Qualification (AIQ), • Automation Operational Qualification (AOQ), • Requirements Traceability Matrix (RTM), • Qualification Summary Reports (QASR), • Understanding of the capital project lifecycle from design through CQV, • Experience working with instrumentation, process equipment, and control panels, • Ability to read P&IDs, electrical schematics, and automation logic diagrams, • Strong troubleshooting and problem-solving skills, • Experience supporting facility and clean utility systems in pharma manufacturing, • Exposure to automation for purified water distribution systems, • Experience working on capital expansion or facility upgrade projects, • Experience collaborating with CQV teams and validation groups

Job Description Berendsen Territory Sales Representative – Fluid Power Components, Systems & Controls (PA/NJ) Berendsen is one of North America’s leading value-added distributors, providing custom-designed hydraulic, pneumatic, electrical and electronic solutions to Mobile and Industrial OEMs and End Users. We are seeking a high-energy Territory Sales Representative to manage and grow our presence across Eastern Pennsylvania and New Jersey. This is a "roll-up-your-sleeves" technical sales role focusing on providing total fluid power solutions—ranging from complex systems and power units to everyday hose and fitting components—to a diverse mix of small-to-mid-sized OEMs and large industrial end-users. The Territory • Coverage: Eastern Pennsylvania (Philadelphia/Lehigh Valley/Scranton) and all of New Jersey., • Needs-Driven Consulting: Uncover customer pain points and business priorities to deliver customized, value-added solutions., • Technical Problem Solving: Work directly with maintenance managers and engineers to spec out pumps, valves, cylinders, and hose assemblies., • Technical Literacy: Read and interpret hydraulic schematics to troubleshoot existing systems and identify where our components can improve performance or reliability., • Integrated Solutions: Leverage a general knowledge of electrical and control design to help customers integrate fluid power systems with PLC-driven environments and electronic controls., • Strategic Selling: Utilize a structured strategic selling methodology to manage complex, multi-stakeholder sales processes and create "win-win" partnerships. We believe in empowerment through support. We provide a robust technical backup team—including dedicated inside sales, application engineering, and product support—specifically designed to handle the administrative and deep-technical heavy lifting. This structure ensures you can spend 80% of your time in front of customers, doing what you do best: building relationships and closing deals. What You Need to Bring • Value-Based Sales Approach: Proven ability to build value in the eyes of prospects by positioning products as solutions to specific business challenges., • Team Collaboration: A collaborative mindset, working closely with our internal engineering and support teams to deliver a seamless customer experience., • Technical Proficiency: Demonstrated ability to read and understand hydraulic schematics and a working knowledge of electrical control circuits., • Time & Territory Management: Strong skills in planning your time and administrative tasks effectively to maintain a consistent presence across a large geographic area., • Educational Background: A Mechanical Engineering degree is a strong plus, as is an IFPS Certification (Hydraulic Specialist or Mechanic)., • Competitive base salary, incentive programs, car allowance, company-provided laptop and cell phone, • Comprehensive benefits package, including both a PPO and High-Deductible plan (with company matching HSA), • Unlimited flexible vacation plan, holidays and floating holidays, • Disability and Life Insurance, • Company matching 401(k) (50% up to 8%), • Tailored training and development programs

Job Description As part of a team you will design and supervise the manufacturing of control and monitoring systems for Commercial and Naval Ships. You will work to produce equipment drawings , electrical wiring diagrams,cable interconnection drawings and interface designs. Assist in the functional design of HMI, PLC architecture, networks and communication interfaces.Perform Factory acceptance test of the finished system to both customer and regulatory societies. Support commissioning and sea trials from the office but at times visiting the ship.Finally provide technical advice and assistance to sales, and service personnel. Company DescriptionWe are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Job DescriptionBenefits: • Dental insurance, • Health insurance Position Overview A fast-paced, refrigerated food manufacturing and distribution facility is seeking an experienced Maintenance Supervisor to lead its maintenance team. This role is responsible for overseeing daily mechanical and electrical maintenance activities, ensuring minimal production downtime, and driving a culture of safety, preventive maintenance, and continuous improvement. Key Responsibilities • Supervise a team of maintenance technicians across multiple shifts, providing direction, training, and performance feedback, • Lead mechanical troubleshooting, repair, and preventive maintenance activities on conveyor systems, motors, gearboxes, pneumatics, VFDs, photoeyes, sensors, and other production equipment, • Coordinate and prioritize work orders to minimize production downtime and meet operational goals, • Oversee electrical diagnostics, including wiring, control panels, PLCs, and 3-phase systems (role split: ~70% mechanical, ~30% electrical), • Manage the preventive maintenance (PM) program, ensuring schedules are followed and maintenance records are accurately kept, • Collaborate closely with production, sanitation, and quality teams to ensure equipment operates safely and efficiently in compliance with GMP, OSHA, and food safety standards, • Assist in vendor coordination, spare parts inventory, and capital project support, • 5+ years of maintenance experience in a manufacturing or food production environment, with at least 2 years in a supervisory or lead role, • Strong mechanical troubleshooting and repair skills; solid electrical knowledge preferred, • Experience working with conveyors, motors, gearboxes, pneumatic systems, and production equipment, • Familiarity with PLC troubleshooting, VFDs, control systems, and basic electrical diagnostics, • Strong organizational and communication skills, with the ability to manage competing priorities in a high-pressure setting, • Experience using preventive maintenance systems (CMMS) and applying maintenance best practices, • Knowledge of GMP, OSHA, and food safety compliance standards, • Previous experience in refrigerated or food manufacturing environments, • Bilingual (English/Spanish) a plus, • Technical certifications in mechanical, electrical, or automation systems

Job DescriptionJob Title: Maintenance SupervisorJob Description We are seeking a skilled Maintenance Mechanic to join our team. The Maintenance Mechanic will be responsible for ensuring the smooth operation and maintenance of our machinery and equipment. This role requires a strong understanding of mechanics, hydraulics, and pneumatics, as well as excellent problem-solving skills. Responsibilities • Conduct regular inspections and preventive maintenance on machinery and equipment., • Diagnose and repair mechanical issues, including hydraulics, pneumatics, and electrical systems., • Perform emergency troubleshooting and repairs when breakdowns occur., • Replace or repair defective parts using hand tools and machinery., • Test fixed machinery to ensure proper performance., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Ensure compliance with safety regulations and maintain a clean and orderly work area., • Document repair and maintenance work for record-keeping purposes., • Recommend improvements or modifications to enhance system performance.Essential Skills, • Comfortable running independently., • Experience with process equipment., • Comfortable working with chillers and boilers., • Start-up and troubleshooting experience., • Understanding of Allen Bradley PLC., • Bilingual (Spanish)., • Previous experience as a maintenance mechanic or similar role., • Strong understanding of pneumatics, hydraulics, and mechanics., • Familiarity with using various power and hand tools., • Ability to stand for long hours and lift heavy loads., • Excellent problem-solving and organizational skills.Additional Skills & Qualifications, • Degree in engineering or manufacturing is a plus. 401k and short form available on request Workplace Type This is a fully onsite position in Perth Amboy,NJ. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description As a Maintenance Manager, you will lead the team in troubleshooting and repairing mechanical, electrical, and automation issues. You will utilize CMM systems to manage preventive maintenance schedules and asset history, ensuring minimal downtime by prioritizing root-cause analysis and implementing long-term corrective actions. This role requires hands-on leadership, actively diagnosing issues alongside your team and supporting PLC troubleshooting. You will maintain compliance with food-safety, OSHA, and facility standards while supporting capital projects, equipment upgrades, and process improvements. Responsibilities • Troubleshoot and repair mechanical, electrical, and automation issues., • Utilize CMM systems for preventive maintenance schedules and work orders., • Coordinate with controls specialists for PLC-based equipment troubleshooting., • Partner with production leadership to minimize downtime and prioritize root-cause analysis., • Ensure compliance with food-safety, OSHA, and facility standards., • Support capital projects, equipment upgrades, and process improvements., • Diagnose mechanical and electrical issues directly at the line., • Work alongside technicians during complex repairs., • Use tools, testing equipment, and CMM systems in real-time., • Experience managing maintenance in a manufacturing environment (food or dairy is a plus)., • Hands-on approach to diagnosing and repairing equipment., • Understanding of CMM systems and preventive maintenance planning., • Working knowledge of PLCs, including reading ladder logic., • Ability to coach, develop, and motivate a diverse maintenance team., • Experience in food or dairy manufacturing environments is beneficial., • Familiarity with regulatory and safety standards., • Capability to work in a fast-paced, equipment-dense environment. Join a company that has experienced steady growth over the last decade, providing opportunities for personal and professional development. Enjoy working in a collaborative environment where your contributions directly impact product quality and team success. The company values continuous improvement and offers a dynamic workplace where safety, reliability, and teamwork are prioritized. Work Environment The plant operates in a clean, regulated food-production environment with a strong emphasis on equipment reliability. The pace is steady with moments of urgency, requiring quick shifts between planned maintenance and real-time troubleshooting. The role involves working across refrigerated areas, warm processing zones, and standard production floors. The environment is fast-paced, hands-on, and highly collaborative, making it ideal for those who enjoy being on the floor, solving problems directly, and leading a team. Job Type & Location This is a Permanent position based out of Perth Amboy, NJ. Pay and Benefits The pay range for this position is $125000.00 - $145000.00/yr. 401k and short form available on request Workplace Type This is a fully onsite position in Perth Amboy,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Electrician | Edison, NJ | Starting Pay $36.49 per hour Join Silgan Containers, America’s largest metal food packaging producer, as an Industrial Electrician in Edison, NJ. We’re looking for skilled electricians to troubleshoot, maintain, and repair electrical systems in a fast-paced manufacturing environment. What We Offer * Pay: Starting at $36.49 per hour plus shift differential for 2nd and 3rd shifts * Consistent Wage Increases * Comprehensive Benefits: Medical, dental, vision, prescription coverage, life insurance * Specialty Programs: Pet insurance, health programs for diabetes, hypertension, and more * 401(k) with Company Contributions * Paid Time Off & Holidays * Training & Tuition Reimbursement * Company-Paid Uniforms & Prescription Safety Glasses * Safety Shoe Allowance * Commitment to Safety: “Drive to Zero Injuries” initiative * Sustainability Leadership: Edison is Silgan’s first facility with on-site solar power What You’ll Do * Troubleshoot, maintain, repair, and modify electrical systems * Investigate mechanical, operational, and electrical issues and take corrective action * Perform maintenance, wiring, and installation of motors, switches, fuse boxes, lighting, and power circuits * Create and maintain up-to-date layouts of electrical circuits * Work with Allen Bradley systems, VFDs, PLC hardware/software, AC/DC circuits, 4-20 mA circuits, and 440 MCCs What We Need * High School Diploma or GED - Trade school certification preferred * 3+ years of experience as an electrician in a manufacturing environment * Ability to read and interpret blueprints, schematics, and technical manuals * Strong troubleshooting skills and knowledge of industrial electrical systems About Silgan Containers We are the largest metal food packaging producer in North America, committed to sustainability and innovation. From increasing recycled content to renewable energy initiatives, we’re rethinking how to make the metal food can. Ready to start your career as an Industrial Electrician in Edison, NJ? Apply today and join a team that values safety, growth, and innovation. You should be proficient in: • PLC Troubleshooting Skills, • PLC Programming Experience, • PLC Wiring Experience

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Plastipak - - Responsibilities: Perform maintenance for blow molding & injection molding manufacturing equipment to assure uninterrupted & optimal operations; Execute & continuously improve preventative maintenance procedures; Participate in changeovers, ensuring efficient & correct execution; Repa

National Church Residences - - Responsibilities: Perform routine and preventive maintenance on HVAC, plumbing, electrical, and safety systems; Diagnose and repair mechanical, electrical, and plumbing issues; Supervise and train junior maintenance staff; Manage inventory and order supplies; Document

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U.We have a strong in-house group of field technicians that services top U.We are always looking for talented people driven to be highly productive members of the team with an

Residential & Commercial Property Maintenance Services Professional.HomeSmiles is the one-stop shop for safe and healthy property maintenance solutions.Our 18-point approach protects clients and their investments from dangerous conditions, unexpected and costly repairs.A successful Residential & Com

We are seeking a skilled Junior Electrician proficient in using EMT with a hand bender, table bender, and bending conduit ranging from 1/2 to 3/4 inch.The role involves building conduit rack systems, pulling wire through conduit systems, and working with exposed conduit and racking systems.Responsib

The Electrician assists field crews on commercial construction and retrofit projects, ensuring electrical installations are completed safely, on time, and according to plans, codes, and quality standards.Install, maintain, and repair electrical systems related to HVAC, mechanical, and building syste

Property Maintenance Service Technician.With over 7 years in business, HomeSmiles offers opportunities to work for various residential clients, commercial clients, individual homes, property managers, and offices.HomeSmiles is the one-stop shop for safe and healthy property maintenance solutions.Our

Special Events Service Technician.The Special Events Service Technician is responsible for operating a company service truck and driving to various locations at an event to service/pump/clean portable restrooms or holding tanks.This position also performs basic pick-up and delivery of units and the

SCOPE: Rental Maintenance Tech is responsible for performing routine maintenance and repairs on rental properties, including plumbing, electrical, HVAC systems, carpentry, and minor appliance fixes, responding to tenant maintenance requests promptly, and ensuring the overall upkeep of Lakeshore Asse

Work with Allen Bradley systems, VFDs, PLC hardware/software, AC/DC circuits, 4-20 mA circuits, and 440 MCCs.

Plumber Residential Drain Cleaner.Posting Title: Plumber (Residential Drain Cleaner).Are you a plumbing expert who is passionate about problem solving and customer service? Looking to accelerate your career (and income!) with an organization who values its people? Come see why so many of our team me

Momentum Solar is a premier residential solar provider with offices throughout the U.Founded in 2009; Momentum has grown exponentially over the past decade.We implement the entire solar process to ensure a seamless transition to renewable energy.Pay rate: $35+/hr depending on experience.Installs, re

The Electrician is responsible for troubleshooting and repairing electrical systems, including PLCs, control systems, motors, VFDs, and other complex electromechanical equipment. Troubleshoot and diagnose issues with PLCs.

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a.Spectrum, yo

Kelso- Electrician (Eligible to Drive).Job Category: Operations Field.Requisition Number: KELSO018895.Follow verbal and written instructions.Safe use of hand & power tools.Report to and assist immediate supervisor.Perform quality work as determined by project specifications.Accountable for all tools

Customer Service Tech/Route Delivery Driver.Do you like being on the road and interacting with customers? Dreaming of a long-lasting career with a stable company? Our company relies on our Customer Service Tech/Route Delivery Drivers to deliver fountain products to our customers and perform basic ma

Property Maintenance Service Technician.Career advancement opportunities.With over 7 years in business, HomeSmiles offers opportunities to work for various residential clients, commercial clients, individual homes, property managers, and offices.HomeSmiles is the one-stop shop for safe and healthy p

Plumbing Technician NO ON-CALL - CHOOSE YOUR SHIFT.At Gold Medal we pride ourselves in creating an excellent working environment by hiring the best technicians, training them better than anyone, and creating an environment where our technicians are our number one priority.Reasons you will love work

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a.Spectrum, yo

We are seeking a skilled Electrical Mechanic with expertise in commercial electrical installation work.The role involves working with conduit sizes ranging from 1/2 to 4inch, including tasks like creating 90-degree bends, offsets, and saddles.You will be responsible for building conduit rack systems

Building Maintenance Technician.MMS Group is seeking an experienced Building Maintenance Technician for a 141-unit residential property located in Staten Island, NY.Regular Maintenance: Maintain residential apartment homes and other areas on the property, including building exteriors, interiors, and