Trabajos plc en Tampa, FloridaCrear alertas

Job description Reporting to the Terminal Supervisor, this position is responsible for supporting the day-to-day operations of our Cement and Aggregates Terminal. This is an operator role requiring strong mechanical and troubleshooting abilities, as well as hands-on heavy equipment experience (including operation of front-end loaders and similar equipment). The position plays a key role in ensuring safe, efficient, and continuous terminal operations. KEY ACCOUNTABILITIES Machine Operator Duties (Duties include but are not limited to): • Ensure strict compliance with all safety procedures., • Operates a loader, straight or an articulated rubber-tired tractor-type vehicle, equipped with a front-mounted hydraulically powered bucket or scoop, to lift and transport bulk materials, to feed conveyors, hoppers, or chutes, and to load trucks., • Perform the loading and unloading of cement/aggregate products from or to ships, barges, railcars or bulk trucks., • Coordinate bulk loading activities with customer drivers and sales personnel., • Inspect railcars and bulk trucks prior to loading., • Operate locomotive, or car puller to move or position railcars in place for loading or unloading or to transfer railcars to switching tracks., • Operate front end loader, forklift, manlift, and other mobile equipment as required., • Operate controls to convey proper cement/aggregate product to railcar or bulk truck. Close hatches on railcars and seals., • Perform the loading and unloading of aggregates from ship to yard. Load aggregates into customer trucks., • Ensure customer orders are filled accurately., • Promptly address customer concerns and refer more complex problems to supervisor for resolution., • Ensure shipping and receiving paperwork is completed accurately and on a timely basis., • Ensure housekeeping at the facility is maintained to the highest standard. Mechanical Maintenance Duties: (Duties include but are not limited to): • Performs routine maintenance on the loader, such as lubricating, fueling, greasing, blowing out filters, check fluid levels, and cleaning., • Ensure preventive maintenance and repairs are executed on terminal equipment and activities are logged. POSTION REQUIREMENTS • MUST have heavy equipment experience (e.g., front-end loader, excavator, backhoe, bulldozer, etc.), • Previous experience in cement or related industry a plus, • Previous or current Front-End Loader certified (or able to be certified), • MUST be capable of working extended hours and weekends (per schedule)., • Capable of accessing heights - top of railcars, stairways to silo top elevations, etc., • PLC experience a plus, • Clerical skills a plus, • Must be able to pass TSA security requirements to obtain TWIC card., • Demonstrated commitment and ability to follow safe working practices and in a team environment., • Demonstrated organizational and communication skills.

Defined Contribution Plans Senior Analyst. Certain senior level roles may also be eligible for non-qualified Deferred Compensation and Deferred Savings Plans.

Great Advancement Opportunities.We now offer Fuego to our employees.Fuego offers On-Demand Pay via a downloadable app that offers both Earned Wage.On-Demand Pay allows employees to draw down up to 50% of their earned wages ahead of payday.The offer is generated based on the hours worked within the c

Performance bonus available Paid Training Uniform Provided What you will be doing Ramp Agent, Ramp Agent, Part Time, Airline, Agent.

Job Description As a Boiler Technician you will provide quality service and troubleshooting on customer’s boiler system equipment through preventative maintenance and emergency services. We are open to hiring applicants from apprentice through experienced levels. Prior experience with boilers or electrical controls is strongly preferred, but we are willing to train. Responsibilities • Collaborate with customers at job sites to identity problems and offer effective solutions., • As part of the Service Dept., you’ll work closely with Senior Technicians to complete projects as well as mentor other technicians., • Responsible for maintenance, cleaning, tearing apart, maintain combustion and controls, very technically focused role., • Provide reports detailing daily activities., • Project management, • Proactively work towards leveling up through the Growth Program, • High School diploma required, • 3+ years of field experience (boiler industry or electrical controls experience) preferred, • Advanced understanding of Boiler room equipment and controls, combustion testing equipment, Parallel Positioning Systems and controllers preferred, • Electrical knowledge and proficiency with test equipment, the installation of a conduit and complex control upgrades. Understanding of PLC Programs., • Flexibility to work overtime or weekends, when necessary., • Current valid Driver’s license is required, • Ability to pass a drug test, background check, and motor vehicle record check if hired., • Exceptional customer service acumen and professional communication skills You should be proficient in: • Driver's License, • Electrical Troubleshooting, • PLC Programming Experience, • Boiler Operation

Job Description Bausch + Lomb (NYSE/TSX: BLCO) is a leading global eye health company dedicated to protecting and enhancing the gift of sight for millions of people around the world—from the moment of birth through every phase of life. Our mission is simple, yet powerful: helping you see better, to live better. Our comprehensive portfolio of over 400 products is fully integrated and built to serve our customers across the full spectrum of their eye health needs throughout their lives. Our iconic brand is built on the deep trust and loyalty of our customers established over our 170-year history. We have a significant global research, development, manufacturing and commercial footprint of approximately 13,000 employees and a presence in approximately 100 countries, extending our reach to billions of potential customers across the globe. We have long been associated with many of the most significant advances in eye health, and we believe we are well positioned to continue leading the advancement of eye health in the future. Objectives/Purpose of the Job: Perform facility repairs and maintain production equipment while performing mechanical and electrical repairs. This position is a weekend coverage position and is intended to provide 24/7 coverage to the site. Key Activities/Responsibilities: * Process daily work orders and perform upgrades of facility equipment. * Troubleshoot and repair control cabinets, variable frequency drives, and main electrical distribution panels. * Perform Preventative Maintenance (PM’s) as assigned on scheduled equipment. * Assist Utility Department in general repairs and passivation’s. * Maintain GMP and SOP training compliance. * Support engineering projects. * Maintain GMP and safety compliance. * Follow procedures and maintain compliance within the respective areas. * Abide by LOTO, PPE and good housekeeping procedures. * Repair machine parts using general machine shop equipment. Ability to operate a lathe, mill and welder (preferred but not required) * Ability to work in a confined space, entry is required. * Respirator qualification is required. (Training Provided) * Must be capable of working in the aseptic environment (Training Provided) * All other duties as assigned. Scope of Position Process daily work orders and preventive maintenance, which includes troubleshooting, repairing and upgrading the production, facility, and lab equipment. Qualifications/Training: On the Job Training provided: • Aseptic Gowning Certification., • HS Diploma/GED required., • Logical approach to troubleshooting and repair of manufacturing and facility equipment., • Minimum of 2 years’ experience for controls and electrical., • Good organizational skills, able to work quickly and under pressure., • Good verbal and written communication skills, • Must be detailed oriented and quality conscious., • Computer skills; Microsoft Office (Word, Excel), • Able to use general tools (hand tools, electrical tools, measuring tools, etc.), • Ability to operate lathe and milling machine (preferred). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Job Applicants should be aware of job offer scams perpetrated through the use of the Internet and social media platforms. To learn more please read. Our Benefit Programs: Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. You should be proficient in: • Heavy Equipment Repair, • Equipment Troubleshooting, • Electrical Troubleshooting Skills, • Electrical Troubleshooting, • Industrial Controls, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Mitsubishi, Schneider Electric), • Conveyor Systems

The Associate Client Advocacy (ACA) team leader will manage a group of 6-12 ACAs depending on size of region/specialty and will be responsible for various business operations to support client retention and growth. Associate Client Advocate - Team Leader. The team leader role within their region and

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. Under the direction of the Plant Manager, and Maintenance Technician, provide maintenance support for both mechanical and electrical equipment ensuring the plant operates at the highest level of uptime and efficiency. Perform all maintenance functions within company defined Environmental, Health and Safety guidelines and sustain a clean and organized maintenance department. This is a 2nd shift position. The hours are 3pm to 11:30pm Monday - Friday Key Responsibilities • Adhere to all OSHA safety requirements as it relates to the duties of maintenance operations., • Complete all required OSHA or corporate training courses as defined by management before conducting tasks., • Wear proper PPE as required for the task at hand., • Under the direction of the Maintenance Manager, perform preventative and corrective maintenance activities., • Install or repair pumps, motors, conveyors, filler lines, plant equipment or other devices required to maintain production uptime., • Typical equipment includes, but not limited to: 1) process pumps and mixing equipment, 2) pneumatic components and control systems, 3) hydraulic components and control systems, 4) power transmission systems (gearboxes, chains, drives, etc), 4) relay logic, 5) field instrumentation, 6) PLC/DCS troubleshooting., • Troubleshoot equipment issues and provide supervisor or management a repair solution including parts list and timeline., • Perform basic electrical tasks such as wring motors, VFD’s control panels or other low and high voltage equipment., • Maintain maintenance shop in a clean, organized, professional condition, following all safety requirements for hazardous materials., • Keep all tools, power equipment, and other tools of the trade in a clean and safe working condition., • Ensure all documentation for LOTO, Confined Space, Hot Work and other related safety documents are completed before performing any work ., • Maintain effective and positive communication with production staff., • Keep supervisors and management aware of pending issues and status of installation or repair., • Coordinate preventative maintenance tasks on key plant equipment and ensure completion of those tasks., • Strive to meet safety targets or objectives set by the supervisor or management. Experience and Skills Requirements • A minimum of 5 years performing mechanical duties in a manufacturing or similar environment., • Highly experienced background installing/repairing air pumps, PD Pumps, pneumatic valves, gearboxes., • Ability to install and wire 100 hp electric motors, limit switches, photoelectric sensors, VFD’s., • Exhibit a strong problem-solving aptitude when it comes to mechanical equipment., • Operate Forklift, Man Lift, Scissor Lift, or other similar equipment., • Order parts, check paperwork on receipt of parts., • Attend safety meetings, conduct safety audits., • Safely perform all other duties as required by supervisor on an as needed basis., • Computer skills., • Welding certifications plus strong pipe fitting and electrical skills., • Able to read technical documents., • Experience with preventative maintenance programs., • Background working with asphalt related products or equipment., • Advanced education or training in engineering, mechanics or technical related fields., • Understanding of boiler and or hot oil systems., • Maintain effective and positive communication utilizing reading, writing, and documentation creation in English for manufacturing staff, Computerized Maintenance Management System (CMMS), and outside/inside support services. Working Conditions • Must have 20/20 or corrected 20/20 vision., • Strong communication skills., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to stand for extended periods., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Must be able to work at heights in excess of 40 feet without concern., • Must be able to work in a plant environment with varying levels of temperature and physical requirements. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR aUY0gVtvSd

At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. The Quality Inspector will be responsible for inspecting electronic assemblies in a high-paced manufacturing environment. We are proud to be an inclu

Job DescriptionRocha Controls is a full-service company specializing in supervisory control and data acquisition (SCADA) systems, computer networks, programmable logic controller (PLC) systems, telemetry, instrumentation, and variable frequency drive and motor control center installations. We are seeking a self-motivated and effective SCADA ProgrammerDesign and Program:Develop control logic for PLCs, which act as the "brains" of industrial machinery, using languages like ladder logic, function block diagrams, and structured text (as defined by IEC 61131-3). • Configure and Develop HMIs:Create Human-Machine Interfaces (HMIs) within SCADA systems for operators to visualize process data, control equipment, and manage alarms., • Integrate Systems:Work with SCADA software to consolidate controls, collect real-time data from PLCs and sensors, and integrate these components into a cohesive industrial automation solution., • Troubleshoot and Maintain:Diagnose and resolve issues within control systems, ensuring the continuous and efficient operation of automated industrial processes., • Collaborate and Document:Work with other engineering teams to define project requirements and document system configurations, including wiring diagrams and PLC logic. Job Posted by ApplicantPro

Job Description PegasusTSI is a private, Florida-based company where people matter, where your voice is heard, and where decisions are made with PegasusTSI's business wellbeing and our team members' best interest in mind. During the company's more than 25-year history, our team has supported clients in the oil refining, petrochemical, fertilizer (phosphate and nitrogen), chemical, pharmaceutical, municipal, consumer products, and industrial facilities industries in the USA and internationally. PegasusTSI offers a comprehensive benefits package that includes medical, dental, vision, short and long term disability, long term care, life insurance, 401(k), paid time off, paid holidays, and company events that supports our team members throughout their career. We have an excellent opportunity for a Senior Instrument & Controls Engineer. The Senior Instrument & Controls Engineer is accountable for the adequacy of calculations, engineering drawings, and specifications for a project and compliance with schedule and budget. Responsibilities: • Maintain solid knowledge of digital and analog control systems for regulatory and supervisory process control design, development of control philosophy, and coordination of work between other disciplines and instrumentation departments, • Prepare workhour (engineering) estimates, installed cost estimates, budgeting, scheduling, controlling and reporting instrument and control design progress to ensure efficient and timely execution of the project, • Coordinate with Client on instrument specifications and control philosophy issues related to the development of P&ID diagrams, control systems design, and wiring of distributed control systems and programmable controllers, • Supervise engineering and design team members assigned to projects, manpower-planning, and scheduling of engineering activities, • Provide technical guidance and quality check on design team's output, as a working engineering and design discipline leader, • Liaise with plant and construction team members for on-going domestic and international projects, • Bachelor's of Science degree in Engineering related to Instrumentation and Control Systems (ABET accredited), • 10 or more years of experience in front-end and detailed engineering design of heavy industrial plants, • Professional Engineering (PE) required with established NCEES record for obtaining licensure in additional states, • Field work experience, • Extensive background in the design of instrumentation and control systems for chemical, refining, petrochemical and specialty chemical plants, including preparing instrument specs, loop sheets, wiring diagrams, etc., • Solid background in Programmable Logic Controller (PLC) and Distributed Control Systems (DCS) systems such as Allen Bradley, Emerson-Delta V, Yokogawa, Honeywell, etc., including Control systems design, preparing architectural network diagrams, and control equipment specifications, • Experience with detailed Design, Public Improvement Districts (PID) development, instrumentation and control equipment specifications, datasheets, • Knowledge of ISA, NFPA, API, ASME, OSHA and other relevant industry codes and standards with respect to design requirements, • Proficient with technical software applications, including MS Office and Google Workspace, • Excellent interpersonal and communication skills both verbal and written, • Ability to work both autonomously and collaboratively within a team environment, • Willingness to travel to job sites, as needed, • Must be legally authorized to work in the U.S. without company sponsorship

Job Description Field Service Engineer SGM Magnetics - Lifting Division Position Summary The Field Service Engineer is responsible for hands-on commissioning, inspecting, troubleshooting, upgrading, and supporting SGM lifting magnet systems installed on overhead and outdoor cranes. This role requires frequent travel to customer facilities, primarily within heavy industrial and steel mill environments, and close coordination with the Engineering and After-Sales Departments in Italy. The position demands strong electrical and controls expertise, the ability to work independently in autonomous field conditions, and the professionalism required to represent SGM directly to customers. Key Responsibilities • Travel up to 60% of the time to customer facilities across the United States and Canada to:, • Commission new lifting magnet systems, • Perform inspections and preventative maintenance, • Execute system retrofits and upgrades, • Diagnose and resolve electrical, mechanical, and control-related issues, • Commission, test, and inspect high-voltage and low-voltage electrical systems installed on overhead cranes and outdoor cranes., • Troubleshoot and modify PLC-based magnet control systems, including:, • Hardware and software diagnostics, • Do program updates and ladder logic verification, • Understand and troubleshoot complete magnetic lifting devices, including:, • PLC and electromechanical controllers, • Industrial communication networks (Ethernet, DeviceNet, Profibus, Profinet), • AC/DC drives, • Battery backup systems, • HMI systems and wireless control network components, • Perform programming and troubleshooting using platforms such as:, • RSLogix 5000, • Studio 5000, • FactoryTalk View, • TIA Portal, • Other industrial control software tools, • Deliver customer training on system operation, safety procedures, troubleshooting, and best practices., • Interpret electrical schematics, wiring diagrams, and technical documentation to support commissioning and service activities., • Generate detailed service, commissioning, and inspection reports, including:, • Electrical measurements and troubleshooting, • Root cause analysis, • Corrective actions, • Photographic documentation, • Technical recommendations, • Maintain organized documentation of manuals, reports, drawings, and project-related files., • Coordinate technical clarifications and troubleshooting efforts with the Engineering Department in Italy., • Ensure strict compliance with safety standards, including work in steel mill environments, use of aerial lifts, and adherence to site-specific safety procedures. Work Environment and Physical Requirements • Comfortable working at heights and driving aerial lifts, • Stand and/or walk during shifts lasting up to 10 hours, • Work flexible schedules including weekends, nights, and holidays as required, • Operate in environments with varying noise levels, • Lift up to 50 pounds, • Frequently push, pull, squat, bend, reach, and climb stairs when applicable, • Work in heavy industrial and steel mill environments Required Qualifications • Bachelor's Degree in Mechatronics, • Willingness to relocate to the United States, • Strong knowledge of electrical systems (high and low voltage), • Knowledge working with PLC and PC-based control systems, • Knowledge in industrial communication protocols (Ethernet/IP, DeviceNet, Profibus, Profinet), • Knowledge working with HMI systems and/or other control network components, • Ability to read and interpret electrical drawings and technical documentation, • Strong verbal and written communication skills, • Excellent customer service and interpersonal skills, • Ability to work independently in an autonomous environment, • Willingness to travel up to 60% Compensation and Benefits • Starting Salary: $55,000 USD per year, • 6-Month Performance Review: Increase to $60,000 USD per year, • Housing: SGM will provide housing for two months during apartment search, • Benefits: United Healthcare (Medical, Dental, Vision, Life AD & D) paid by company, • SGM 401(k) Profit Sharing Plan, • Vacation and Paid Holidays, • TN Visa: SGM will assist and cover fees for TN Visa processing, • Relocation: SGM will cover flight to the U.S. and shipping of personal belongings (excluding vehicle and furniture) Company DescriptionSGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.SGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.

Job Description Electrical Engineer/Designer Location is onsite in Tampa, FL. This is not a remote or hybrid position. PD Power Systems LLC is seeking an Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 1-5+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Who We Are: Krones Process Group North America is the subsidiary of the Krones Group, a global leader in the supply of beverage and liquid food filling and packing lines. Krones Process Group North America provides turnkey hygienic process solutions for the brewery, beverage, liquid food, dairy, and HPC industries. We have internal dedicated teams to support the entire process from sales to project management, engineering (design, process, automation), procurement, manufacturing, installation, and after-market lifecycle services support. We deliver the highest quality found in the industry, tailored to fit our customers specific needs. Reasons To Join Our Team: At Krones Process Group North America we are seeking individuals to join our team who have fresh ideas and are open to change. All team members have a voice and are encouraged to provide input. The future of Krones Process Group North America is focused on growth, and the continued development of our team. We offer a full benefits package to include Competitive pay, Health, Dental, Vision, STD, LTD, Employer Paid Life, Voluntary Life, Generous Vacation and Sick/Personal Time, and 401K with company match. Control Systems Engineer Job Purpose or Summary: A Control Systems Engineer is responsible for designing and analyzing control systems, verifying, and implementing code, fixing malfunctions, explaining, and providing information, and analyzing and researching designs. Job Duties and Responsibilities: • Design and Functional Design Specification, PLC code, and sequencer pinning documentation based on process design., • Design I/O Checkout list., • Design equipment specification and cost analysis., • Design electrical schematics and controls equipment., • Develop equipment and labor cost estimation., • Design of control system network architecture., • Lead Functional Design Specification meetings and Factory Acceptance Test simulations., • Lead commissioning and training activities., • Aid in continuous improvements of new and existing Control standards to be utilized by all members. Preferred Qualifications: Education: Bachelor’s degree in electrical engineering. EIT, PE, CCE, ISA, and Ignition Core/Gold certified. Experience/Training: 3-6 years of experience in a related field. Professional Skills • Proficiency with PC and Windows Operating system, Microsoft Office Suite, • Ability to identify, create, plan, and track tasks required to provide a completed Control System Design based on P&ID’s and layouts., • Excellent verbal and written communication skills, • The work environment is a professional office environment where a conservative business dress code is in effect. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit, use hands to type, handle, or feel; and talk or hear. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus., • Equipment use includes computer, calculator, and telephone., • Ability to understand both spoken and written directions and good vision required., • Personal protective equipment required includes protective toed safety shoes and safety glasses with side shields (when on the manufacturing floor)., • Maintain a safe working environment and comply with all safety and environmental policies/procedures. Each employee is to place environment, health and safety requirements as the first priority in the performance of their work duties. An employee is responsible for notifying their immediate supervisor of a violation or deficiency in working conditions and for recommending corrective measures, if possible. Additionally, the employee’s immediate supervisor is to be notified of every injury or illness or near miss., • The mental and physical requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this position.

Job Description Lead Instrumentation & Controls (I&C) Technician Travel-Heavy | High Voltage Power EPC | Location: All throughout Florida About the Role This is a leadership role for an experienced I&C professional who enjoys working on major power infrastructure projects across Florida. If you like moving from project to project, taking ownership in the field, and leading complex I&C work in different infrastructure settings, this role was built for you. You’ll be a key field leader on utility and government scale projects, supporting electric utilities and municipalities throughout the region. What You’ll Do • Lead all I&C field activities on water treatment, wastewater, power plants, BESS, and other electrical industrial projects, • Act as the on-site I&C authority, ensuring work is executed safely, accurately, and efficiently, • Travel extensively throughout Florida supporting multiple projects, • Supervise and mentor I&C technicians while coordinating with PMs, engineers, and clients, • Install, test, troubleshoot, and support:, • Protection & Control panels, • Relays, meters, RTUs, PLCs, HMIs, and SCADA systems, • Review and markup drawings, wiring diagrams, loop sheets, and control narratives, • Support outage activities, testing, and commissioning, • Create schedule outlining multi week plans, • Create cut over plans to maintain power to critical equipment, • Create test plans that follows the solicitation documents, • 7+ years of I&C experience, ideally in medium-voltage power or utility environments, • Strong background in switch gear, I&C or protection & control, • Proven experience leading crews in the field, • Comfortable working travel-heavy schedules and rotating between job sites, • Water Treatment / Wastewater, • BESS experience, • Relay testing or commissioning experience, • PLC/SCADA experience, • NICET, journeyman license, or similar certifications

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. ICP is seeking a Maintenance Manager for our Tampa, FL plant. Under the direction of the Plant Manager, you will coordinate all mechanical and electrical maintenance activities ensuring the plant operates at the highest level of uptime and efficiency. Perform all maintenance functions within company defined Environmental, Health and Safety guidelines and sustain a clean and organized maintenance department. This is a hands on position where the manager performs all required maintenance activities and develops supporting staff to higher levels of skillset. In this role you will be responsible for the following: • Ensure maintenance department adheres to all OSHA safety requirements as it relates to the duties of maintenance operations, • Complete all required OSHA or corporate training courses as defined by management before conducting tasks, • Wear proper PPE as required for the task at hand, • Under the direction of the Plant Manager, coordinate and guide all maintenance activities from start to finish, • Install or repair pumps, motors, conveyors, filler lines, plant equipment or other devices required to maintain production uptime, • Typical equipment includes, but not limited to: 1) process pumps and mixing equipment, 2) pneumatic components and control systems, 3) hydraulic components and control systems, 4) power transmission systems (gearboxes, chains, drives, etc), 4) relay logic, 5) field instrumentation, 6) PLC/DCS troubleshooting, • Troubleshoot equipment issues and provide supervisor or management a repair solution including parts list and timeline, • Perform electrical maintenance such as wring motors, VFD’s control panels or other lower voltage items, • Troubleshoot PLC logic or hardware issues associated with automated process equipment, • Maintain maintenance shop in a clean, organized, professional condition, following all safety requirements for hazardous materials, • Keep all tools, power equipment, and other tools of the trade in a clean and safe working condition, • Ensure all documentation for LOTO, Confined Space, Hot Work and other related safety documents are completed before performing any work, • Maintain effective and positive communication with production staff, • Keep supervisors and management aware of pending issues and status of installation or repair, • Coordinate preventative maintenance tasks on key plant equipment and ensure completion of those tasks, • Strive to meet safety targets or objectives set by the supervisor or management, • Continuous development of maintenance staff through coaching and training, • Operate Forklift, Man Lift, Scissor Lift, or other similar equipment, • Order parts, check paperwork on receipt of parts, • Attend safety meetings, conduct safety audits, • Safely perform all other duties as required by supervisor on an as needed basis Requirements: • Maintenance department supervisor or previous lead mechanic experience, • A minimum of 10 years performing mechanical duties in a manufacturing or similar environment, • Highly experienced background installing/repairing air pumps, PD Pumps, pneumatic valves, gearboxes, • Experience with preventative maintenance programs, • Experience with roll line manufacturing in the roofing, paper or gypsum industries, • Background working with asphalt related products or equipment, • Advanced education or training in engineering, mechanics or technical related fields, • Computer skills, • Welding certifications plus strong pipe fitting and electrical skills, • Able to read technical documents, • Must have 20/20 or corrected 20/20 vision, • Understanding of boiler and or hot oil systems, • Ability to install and wire 100 hp electric motors, limit switches, photoelectric sensors, VFD’s, • Exhibit a strong problem-solving aptitude when it comes to mechanical equipment, • Employee must be able to safely lift in excess of 70 pounds without difficulty, • Employee must have full range of motion and able to work in awkward positions, • Must be able to work at heights in excess of 40 feet without concern, • Must be able to interact with all levels of plant personnel in a positive and productive way, • Experience leading projects from inception to completion, • Position will require lifting, stacking and bending. Employee will use various hand and power tools many of which are large and heavy. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR b0G2cqWG7c

Job Description LCS Electrical and Automation Technician Who We Are: Krones Process Group North America is the subsidiary of the Krones Group, a global leader in the supply of beverage and liquid food filling and packing lines. Krones Process Group North America provides turnkey hygienic process solutions for the brewery, beverage, liquid food, dairy, and HPC industries. We have internal dedicated teams to support the entire process from sales to project management, engineering (design, process, automation), procurement, manufacturing, installation, and after-market lifecycle services support. We deliver the highest quality found in the industry, tailored to fit our customers specific needs. Reasons To Join Our Team: At Krones Process Group North America we are seeking individuals to join our team who have fresh ideas and are open to change. All team members have a voice and are encouraged to provide input. The future of Krones Process Group North America is focused on growth, and the continued development of our team. We offer a full benefits package to include Competitive pay, Health, Dental, Vision, STD, LTD, Employer Paid Life, Voluntary Life, Generous Vacation and Sick/Personal Time, and 401K with company match. Job Purpose or Summary: The Electrical and Automation Technician is responsible for supporting customers with more technical issues including software troubleshooting and minor programming edits as assigned by the LCS Service Manager. Cross training for supporting new greenfield and brownfield projects will be included. Service work for troubleshooting liquid food and beverage processing equipment will be common. They are to adhere to all Krones Process Group North America work instructions, and safety policies. Engagement in Continuous Improvement and Lean Initiatives is also required. The Automation Field Service Technician works through a detailed job Skills Matrix, providing advancement, accountability, and personal growth. Job Duties and Responsibilities: • Troubleshoot automation issues remotely or at customer site., • Troubleshoot electrical issues with VFD’s, I/O, PLC, HMI, etc., • Addressing of devices., • Low voltage wiring and troubleshooting., • Instrument calibration, • Assist project Automation Engineering team on new brownfield and greenfield projects., • Assist with equipment and systems I/O checkout, commissioning, etc., • Develop advanced skills and competence from the Skills Matrix., • Understand 3A procedures and requirements for food-grade processing systems., • Identify deficiencies and assist in developing methods and procedures for improving processes., • Train new team members as required in the Skills Matrix., • Maintain up to date safety training per company standards., • Accurately fill out all required documentation, time sheets, Field Service Reports, etc., • Accurate use of time-keeping system., • Assist estimating and quotation of LCS work as assigned., • Perform other duties as assigned. *An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Preferred Qualifications: Education: Advanced education in automation engineering, or relevant hands-on experience. Experience/Training: 5+ years of experience with Automation Engineering of Process Equipment, preferably in the Beverage and / or food industries. Experience/Training (Mechanical and Electrical troubleshooting and repair): Secondary experience in Mechanical and Electrical troubleshooting issues and repairs. Ability to read P&ID’s and electrical schematics. Strong Electrical aptitude. Professional Skills • Lead and manage small projects with multiple team members., • Knowledge of metric and standard measurement systems., • Basic computer skills are required (Outlook, Excel, Word, etc. General social skills, capacity for teamwork, problem-solving competence, general project management, time and self-management, coordination and organizational skills, and communication skills, both written and orally. Self-starter is a must. Physical / Working Demands • Generally good working conditions in both a manufacturing plant and customer’s sites. Moderate physical effort including frequent standing/walking and occasional exposure to high noise levels is required. During the summer months, exposure to heat and humidity may occur. Lifting/carrying/pushing/pulling of objects weighing 30-50 pounds (10%). Manual dexterity and typing are required (60%). Stooping, kneeling, bending, and crouching are required (30%). Noise levels in work areas may fluctuate from 82 to 110 decibels., • Equipment used includes calculators, measuring devices, hand tools, and voltage meters., • Ability to understand both spoken and written directions and good vision required., • Personal protective equipment required includes protective-toed safety shoes and safety glasses with side shields, hard hat, respirator (in some cases may be required)., • Appropriate OSHA and/or Krones Process Group North America safety training(s) are required., • Maintain a safe working environment and comply with all safety and environmental policies/procedures. Each employee is to place environmental health and safety requirements as the priority in the performance of their work duties. An employee is responsible for notifying their immediate supervisor of a violation or deficiency in working conditions and for recommending corrective measures, if possible. Additionally, the employee’s immediate supervisor is to be notified of every injury or illness, or near miss., • Extended overnight trips to the customer’s site are expected. Hotel costs are currently covered by a company provided expense account and credit card. Per diem will be expensed out on the same report and deposited by direct deposit., • Travel by means of a company vehicle, plane or other modes of transportation as needed (30% to 9*0%.

Job DescriptionCompany Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a business with an almost 170-year history of innovation, and five global divisions, all experts in their field. We believe that different perspectives and backgrounds are what make a company flourish and are proud to be a company with values grounded in integrity, respect, ownership, customer focus, and passion. Job Description This position requires daily travel to locations in and around theAtlanta Metro area, including the airport. Troubleshoots, services, installs (deploys) and repairs Trace, X-Ray, CT X-Ray and Cargo Inspection equipment at customer sites. Maintains field service log and filing system to properly initiate, organize and maintain all field service and job files until work is completed Demonstrates initiative and dedication through positive use of downtime and an overall willingness and eagerness to consistently exceed customer and company requirements. Conducts follow up calls with the customer to ensure satisfaction of work. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: • Responsible for meeting daily service repair needs and driving customer satisfaction, • Installs, repairs and maintains equipment in the field; provides customer training as required., • Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, • Possesses basic technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication, both oral and written, • Establishes and maintains a close relationship with senior level FSE’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as required.Qualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 1-3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation. OTHER REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be confident in the operation of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires full body mobility Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. The compensation for this position ranges from $63,800 - $87,560 per year. (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. Comprehensive benefits package including medical, dental, and vision insurance; 401(k) with company match; paid time off; and other benefits. For details, please visit the Reward & Benefits tab on our main careers page at . All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity PostersIf you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection, Inc. participates in the Electronic Employment Verification Program. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Refresco - - Responsibilities: Own maintenance and upgrades of production equipment to ensure continuous safe operation.

Health & Benefits Associate (Hybrid Setup).As a Health and Benefits Associate you will contribute to a wide variety of projects involving the design, financing and ongoing management of the full spectrum of health and benefit programs.You will support the project manager on select projects, interfac

Diagnose and troubleshoot PLC and automation issues, including faulty components and wiring. Assist with PLC system upgrades and improvements to optimize production efficiency and safety. Train other team members on basic PLC functions and troubleshooting as needed.

Defined Contribution Plans Consultant.Our Retirement team combines expertise in retirement, actuarial, compliance and administration consulting to support global organizations worldwide in designing, managing, administering, and communicating all types of retirement plans.Whether a client has a defi

Full-time and Part-time positions available.Great Advancement Opportunities.We now offer Fuego to our employees.Fuego offers On-Demand Pay via a downloadable app that offers both Earned Wage.On-Demand Pay allows employees to draw down up to 50% of their earned wages ahead of payday.The offer is gene

Associate Director, Voluntary Benefits Consulting.Our Health and Benefits business helps large and mid-size clients control health and welfare plan costs, improve health outcomes and promote employee engagement through broad-based, state-of-the-art interventions.We provide solutions encompassing cre

Health And Benefits Placement Director (Remote).As a Health & Benefits Placement Director, you will significantly contribute to a client's benefits strategy through managing and/or leading the entire carrier/vendor bid, procurement, and negotiation process.You will work across the full spectrum of e

Performs specialized cleaning duties with the intent of disinfecting ambulatory healthcare facilities including restrooms, patient areas, exam rooms, procedure rooms, and specialty areas.Essential Duties and Responsibilities: Disinfects surfaces wit Ambulatory Services, Part Time, Housekeeper, Ambul

As a Receiver, you will receive product and properly store it in the warehouse and prepare for the selectors to pick orders on the 2nd shift.Attention to detail and teamwork are key, and with opportunities for growth, you'll develop valuable skills Warehouse, Manufacturing.

Performs light cleaning duties to maintain establishments, including hotels, restaurants and hospitals, in a clean and orderly manner.Duties include making beds, replenishing linens, cleaning rooms and halls, and vacuuming.Essential Duties and Resp Housekeeper, Part Time, Benefits, Retail, Administr

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

Senior Controls Engineer – Industrial Automation & PLC | Orlando, FL Location: Orlando, FL | 100% Onsite Salary: $110K–$140K + Bonus + ESOP Employment Type: Full-Time About the Role: Wunderlich-Malec Engineering, a 100% employee-owned ESOP firm, is seeking a Senior Controls Engineer with strong

Retirement Plan Compliance Senior Associate.We are seeking an organized and detail-oriented Retirement Plan Compliance Analyst to join our team.As a compliance analyst you will play a crucial role in supporting our attorneys by performing a variety of tasks, which will include drafting/amending pens

Job Summary The Capital Project Manager coordinates large capital improvement and new construction projects and also performs due diligence inspections for potential real estate acquisitions as part of the Physical Assets or Capital Projects team.The successful candidate will embody and work to rein

The Associate Client Advocate (ACA) client-facing functions utilizing the colleague's advanced skills in Commercial Property and Casualty Insurance and is responsible for a blend of internal delivery activities.The ACA is responsible for supporting client relationships, strategy development, and exe

Princeton Precision Group: Always Advancing.Each business unit under the PPG portfolio has been deliberately selected for their ability to support their customers, lead their industry, and provide high quality products.Your journey with us is more than just a job.It is an opportunity to support the

Park7 Management is a fast-growing leader in the student housing industry, with a corporate office in New York and properties nationwide.Our brand, "Student Housing with a Modern Twist," currently manages over 3,000 beds, with an additional 500 beds under construction and 1,800 more in various stage

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's.Best Places to Work "Best Places to Work List 2021".Fast 50 – Fastest Growing Companies 2020” (TLR Ranked 12th).Fast 50 – Fastest Growing Companies 2021” (TL

Ally Building Solutions provides flooring, cabinetry, countertop, appliances, specialties, millwork and window treatment products and expert installation services, as well as design studio solutions, to new home builders in greater Orlando, Jacksonville, Tampa, and Fort Myers.We are looking for an e

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's.Best Places to Work "Best Places to Work List 2021".Fast 50 – Fastest Growing Companies 2020” (TLR Ranked 12th).Fast 50 – Fastest Growing Companies 2021” (TL

Requisition Number: 28802 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points acro

Abacus Service Corporation - - Responsibilities: Under routine supervision, performs experienced service maintenance work in the routine maintenance and repair of building or drainage structures, facility operating systems, grounds, and/or mechanical equipment related to the area of assignment.Empl

The Salvation Army (Southern) - - Responsibilities: Inspects, tests, adjusts, and repairs heating, cooling, piping, and electrical systems, and records maintenance in accordance with schedules; Troubleshoots and repairs minor mechanical malfunctions and performs preventative maintenance on vehicles

Compass Group - 3100 East Fletcher Avenue - Responsibilities: Responds to dispatch calls for machine repairs using company-owned vehicle; Calls on existing customers to determine adequacy of service; Visually inspects and tests machines to determine causes of malfunctions; Inspects parts to detect w