Plc jobs in Clifton, New JerseyCreate job alerts

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact ___

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: Under limited supervision, the Packaging Mechanic III is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role supports equipment performance, production efficiency, and compliance with cGMP, safety, and environmental standards. The position requires hands-on involvement in equipment troubleshooting, diagnostics, maintenance, and changeovers, as well as support for equipment improvements and reliability initiatives in a fast-paced environment. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. Job Requirements: • High school diploma or GED required., • 7+ years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education, training, and experience., • Strong mechanical aptitude and ability to work in a fast-paced environment., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to interpret basic blueprints, schematics, and exploded parts diagrams., • Ability to read and comprehend complex instructions., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Ability to read and interpret workplace graphics, tables, maps, gauges, and diagrams., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Familiarity with PLC systems (Programmable Logic Controls) and ladder logic., • Experience working with packaging equipment and automation systems, including cartoners, inkjet coders, labeling systems, slat fillers, vision systems, and Allen Bradley HMI/VFD platforms.Preferred Qualifications:, • Technical school certification., • 7+ years of mechanical and electrical experience in a packaging/manufacturing environment preferred., • Experience using machine shop equipment.Physical Requirements:, • Exposure to moving mechanical parts and vibration., • Frequent standing, walking, bending, kneeling, crouching, crawling, and climbing throughout the shift., • Ability to lift and/or move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment.Key Responsibilities:, • Diagnose & Repair Equipment: Diagnose, rebuild, modify, and repair packaging equipment to ensure optimal performance., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to reduce unscheduled downtime., • Execute Changeovers: Perform efficient, timely changeovers to meet production requirements., • Recommend Equipment Improvements: Identify and recommend equipment upgrades and modifications to improve performance and reliability., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and employees., • Manage Tools & Materials: Initiate purchase of required tools, parts, and materials, ensuring accountability., • Continuous Skill Development: Upgrade skills and knowledge as equipment and technology evolve., • Maintain Work Quality: Demonstrate commitment to quality craftsmanship and job ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity with PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and perform appropriate corrective actions., • Perform other job-related duties as assignedTraining:, • New hires or internal transfers will complete a three-month training and orientation period., • Proficiency will be evaluated by the area manager or assigned trainer and documented accordingly. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Our client is currently seeking a Plant Engineer Position Overview The Plant Engineer will be responsible for implementing and sustaining automation technologies, supporting high-speed packaging operations, coordinating engineering projects, and partnering closely with maintenance and production teams to achieve performance, safety, and quality objectives. Essential Duties & Responsibilities Automation & Controls Engineering • Develop, maintain, and optimize controls systems to support production and packaging operations., • Program and troubleshoot Allen-Bradley PLCs, including RSLogix 5000 / Studio 5000., • Support, configure, and enhance FactoryTalk HMI/SCADA platforms., • Analyze system performance and implement control system improvements to enhance operational reliability., • Provide technical support for equipment commissioning, upgrades, and automation projects. Maintenance & Operational Support • Provide advanced technical expertise to maintenance personnel in diagnosing and correcting electrical, mechanical, and controls-related issues., • Support preventive and predictive maintenance programs to improve equipment uptime and reduce unplanned downtime., • Participate in root cause analyses and develop sustainable corrective actions. Project Management • Manage engineering and automation projects from concept through implementation, including scoping, budgeting, planning, and execution., • Coordinate with internal stakeholders, contractors, and vendors to ensure timely project completion., • Maintain proper documentation and ensure compliance with corporate, regulatory, and safety requirements. Systems, Data, and Technology Integration • Utilize SQL to extract data, analyze trends, and support system integrations., • Experience with Ignition SCADA is considered a strong asset., • Support data-driven decision-making and digital transformation initiatives within the facility. Compliance & Safety • Ensure adherence to all food safety, OSHA, regulatory, and company standards., • Support audits, documentation reviews, and engineering change management processes., • Promote and maintain a safe working environment through proactive risk assessments and compliance efforts. Required Qualifications • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline., • Minimum of 5 years of experience in automation, plant engineering, or manufacturing engineering., • Proficiency with PLC programming (Allen-Bradley / RSLogix 5000 / Studio 5000)., • Experience with Rockwell FactoryTalk HMI/SCADA systems., • Demonstrated experience in maintenance management or supporting maintenance operations., • Strong communication skills (written and verbal) with the ability to partner effectively across departments., • Proven ability to lead and manage engineering projects. Preferred Qualifications • Experience in food manufacturing or regulated production environments., • Knowledge of high-speed packaging equipment., • Experience working with SQL databases., • Exposure to Ignition SCADA platforms., • Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. Key Competencies • Strong analytical, diagnostic, and problem‑solving skills, • Detail-oriented with a hands-on approach, • Ability to manage multiple priorities effectively, • Strong leadership and cross-functional collaboration skills, • Commitment to safety, quality, and operational excellence

Job DescriptionDescription: Overall responsibility is to provide mechanical, electrical and controls support to packaging as needed, including troubleshooting, preventative maintenance (PM), changeover, modifications, and repair of line equipment to ensure operating efficiently; within FDA CFR 111, 117, 210 & 211 regulated manufacturing facility. RESPONSIBILITIES: Essential Functions: · Perform preventative maintenance on all machinery in the packaging area. · Set up production lines as instructed by daily management tracker. · Effectively and accurately troubleshoot and make routine adjustments and repairs to equipment and machinery to maintain production and maintenance schedules. · Disassemble machinery and equipment to determine worn or broken parts, repair or replace necessary parts by using new parts from stock or by fabricating manufacturing parts to machinery or equipment. · Continually check equipment and machines to proper function for quality, safety, and quantity. · Assembling, installing, and maintaining mechanical systems, machinery, and equipment. · Maintaining a schedule for inspecting, servicing, and testing machinery. · Cleaning, repairing, and installing equipment and parts as needed. · Operating a variety of hand and power tools. · Maintaining a clean and organized work area. · Manage the Operators · Train the Operators · Engage in effective communication with the official technician of the equipment they need assisting for troubleshooting or diagnosis. · Capable of performing electrical troubleshooting on the equipment. · Read and interpret documents such as SOP / GMP, Safety Rules, Operating and Maintenance Instructions. · Diagnose and repair electrical faults (PLC, fuses, relays, etc.) Nonessential Functions/Demands: · Cover the mechanic manager function when applicable. · Uncrate machinery · Assist in maintaining a safe work environment in the production areas by performing routine audits and reporting results. · General understanding of customer specifications. · Hands on in running equipment. · Attention to detail. · Organized, motivated team player. Requirements: QUALIFICATION REQUIREMENTS: · High school diploma/GED or Technical Degree. · 5+ years’ experience as maintenance mechanic. · Knowledge and adherence to GMP’s. · Knowledge of packaging machinery, specifically bottle, pouch, cartoning, thermoform and cold form blisters. · Ability to ready and interpret equipment manuals and blueprints. · Excellent interpersonal, communication and organizational/time management skills. · Ability to prioritize work assignments in a fast-paced work environment. REPORTING RELATIONSHIP: · Manager: Director of Production · Managerial Responsibility: N/A PHYSICAL/MENTAL DEMANDS: · Must be able to remain standing for up to 90% of the time. · Must be able to lift-up 10 pounds frequently and 50 pounds on occasion. · Continually required to talk or hear. · Continually required to utilize hand and finger dexterity. · While performing the duties of this job, the noise level in the work environment is usually moderate. · The person in this position will need to occasionally kneel, climb, crawl, climb and/or reach to complete job duties. · The person in this position is required to communicate to all other departments and must be able to exchange accurate information in these circumstances.

Job DescriptionBenefits: • 401(k), • Dental insurance We are seeking a talented Commercia Laundry Mechanic to join our team. The Commercial Laundry Mechanic has overall responsibility for the daily repair and preventative maintenance of industrial textile processing equipment and facility maintenance. The Commercial Laundry Mechanic ensure that tasks such as start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, or other systems are completed according to policies and procedures. As well as completing daily production workload in a timely manner, consistently providing quality standards in all areas of laundry operations. Duties include but are not limited to: • Maintain, service, and repair all models of commercial laundry equipment including but not limited to washers, driers, ironers, boilers, extractors, presses, stackers, and other machinery used., • Troubleshoot electrical, mechanical, and plumbing, issues and rebuild pumps, valves, regulators as needed while utilizing an excellent understanding of steam/thermal systems., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Inspect, maintain, repair, and service water treatment plant machinery and equipment, including pumps, valves, valve actuators, motors, engines, meters, drives, tanks, reservoirs, compressors, chemical feed and storage systems, UV disinfection systems, heating and air conditioning systems, and other equipment typical of a water treatment facility., • Install and rebuild pumps, motors, piping systems, and specialized water treatment equipment., • Fabricate parts and equipment; operate welding, cutting, and general fabrication equipment., • Pack, lubricate, clean, and paint mechanical equipment and motors., • Inspect newly installed mechanical equipment to ensure safe and satisfactory operation and functionality., • Ensures work is performed safely and efficiently., • Read and interpret technical operation and repair manuals., • Effectively participate with preventive maintenance schedule on all laundry equipment., • Establish an organized laundry inventory system for purchasing of all parts & materials., • Provide technical training to the laundry team. Maintain a constant awareness of safety problems and report unsafe conditions and exposures to laundry manager., • Must understand and adhere to all safety procedures., • Effectively manage daily maintenance requests to minimize equipment down-time and continually improve operational processes., • Strictly adhering to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Keep accurate and timely records of maintenance performed., • Follow written and verbal instructions and perform other tasks as directed by supervision., • Interact with all colleagues in a professional manner, • Comply with all Federal, State and local laws., • Working on boiler and fan systems, • Maintaining logs, records and reports of serviced equipment, • Qualifications:, • Minimum of 3 years hands on experience in a laundry maintenance or similar operation, • Must be able to maintain high levels of confidence., • Maintain a working knowledge of policies and procedures and their proper application., • Minimum of five years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Quantifiable working knowledge of Weishi systems, dyers, folders, sorting, binding, etc. equipment preferred, • Ability to troubleshoot issues in a timely manner, • Ability to shift priorities and changing demands, • OSHA compliance, • Must be able to stand for long periods of time; able to bend, stretch reach and stoop on a continual basis Typical Physical Activity Standing, sitting, walking, stooping, driving a forklift, working on ladder, being in elevated height to perform work, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, reading, speaking, hearing, and lifting up to 60 lbs. Occasionally stoop, bend, kneel, crouch, crawl, reach, and twist; push, pull, lift, and/or carry moderate to moderately heavy amounts of weights; operate assigned equipment and vehicles; ability to verbally communicate to exchange information. Typical Environmental Conditions Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Water treatment plant and field environment; exposure to noise, dust, grease, fumes, gases, potentially hazardous chemicals, electrical energy, and inclement weather conditions, including hot, cold, wet, and/or humid conditions; work around water; work on slippery, uneven, surfaces; work in confined spaces; routinely climb ladders, stairs; regularly work near moving mechanical parts; and work around moderately loud noise levels; incumbents must be available to work variable shifts, including evenings, nights, weekends and holidays.

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: The Packaging Mechanic II is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role, working under limited supervision, supports equipment reliability, production efficiency, and continuous improvement across packaging lines. This is a hands-on, mid-level technical role requiring experience with packaging machinery, changeovers, preventive maintenance, and troubleshooting, with the ability to work more independently while ensuring compliance with cGMP, safety, and environmental standards. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. . Job Requirements: • High school diploma or GED required., • 3–5 years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education and experience., • Strong mechanical aptitude with the ability to troubleshoot and repair equipment independently., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to read and interpret technical diagrams, gauges, maps, tables, and instrumentation., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Ability to work in a fast-paced manufacturing environment., • Working knowledge or exposure to PLC systems (Programmable Logic Controls) and ladder logic., • Technical school certification or related training., • 3–5 years of mechanical and electrical experience in a packaging or manufacturing environment., • Exposure to moving mechanical parts and vibration in a manufacturing environment., • Frequent standing (up to 8 hours), walking, bending, kneeling, crouching, crawling, and climbing., • Ability to lift and move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, and depth perception., • Repair Packaging Equipment: Perform repairs on packaging machinery as needed to maintain uptime., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to eliminate unscheduled downtime., • Execute Changeovers: Independently perform equipment changeovers to meet production requirements., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and internal teams., • Manage Tools & Parts: Initiate the purchase of required tools, parts, and materials, and maintain accountability for issued items., • Develop Technical Skills: Continuously upgrade skills as equipment and technology evolve., • Demonstrate Workmanship: Maintain a high level of quality craftsmanship and ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity and working knowledge of PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and support corrective actions., • New hires or internal transfers will complete a three-month training and orientation period. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

$32 - $36 per hour // Multiple shifts available // 22 days of PTO // Medical, Dental, Vision, and 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $36 per hour A bit about us: Our Client is a growing Food Packaging Manufacturer in Great Atlanta GA. Why join us? Multiple shifts available Scheduled 9-hour shifts. Rotating weekend shifts (8-hour shifts). Average 8–12 hours OT per week. Plenty more if desired. Compensation & Benefits Pay: $32–$36/hr. Benefits: Medical, dental, vision, 401K. 22 days PTO (with floating holidays, accrual-based). 8 recognized holidays. Job Details Job Description SUMMARY The Maintenance Technician II is responsible for performing skilled maintenance and repair work on complex mechanical, electrical, HVAC, and facility systems. This includes troubleshooting and repairing equipment in compliance with standard operating procedures, safety policies, manufacturer specifications, and company requirements. The role also manages spare parts inventory, recommends tools and supply purchases, and supports efficiency improvements within the facility. Additionally, this position provides guidance and oversight for less experienced technicians. ACCOUNTABILITIES Identify, troubleshoot, and resolve mechanical or electrical safety issues. Evaluate equipment and facility needs, recommend solutions, and implement corrective actions to reduce downtime and improve overall efficiency. Maintain purchasing and inventory controls for spare parts, tools, and supplies. Support installations, equipment startups, and ongoing facility projects. Assist with daily and weekly operational support for assets and equipment. Participate in training warehouse and operations personnel as needed. Contribute to special projects and continuous improvement initiatives directed by management. Plan and carry out corrective, preventive, and predictive maintenance activities. EXPERIENCE 3–5 years of experience in industrial or facility maintenance, including work with high-volume conveying systems. 3+ years of experience with PLCs and advanced electrical troubleshooting/repair. Hands-on experience with motors, electrical controls, water systems, large washers, and high-volume operations. Background in welding, pipe installation/repair, and boiler/heating systems. Prior experience performing general facility maintenance such as doors, forklifts, and office infrastructure. SKILLS Strong mechanical and electrical troubleshooting skills. Proficiency with PLC programming and repair. Ability to support and maintain high-volume material handling and conveying systems. Experience with fabrication and facility repair work (welding, piping, heating/boiler systems). Familiarity with maintenance best practices, including preventive and predictive maintenance methods. Ability to mentor and support junior technicians while working in a fast-paced environment. WORK ENVIRONMENT & PHYSICAL DEMANDS Manufacturing or warehouse environment with moderate to high activity levels. Frequent standing, walking, bending, and reaching required. Regular lifting of up to 50 lbs, with occasional lifting up to 80 lbs. Exposure to noise, heat, and moving equipment is common. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview: This position performs installation, maintenance, and repairs of computer driven electro-mechanical production equipment, ensuring that all related quality documentation is executed, while reviewing maintenance procedures for effectiveness. Job Responsibilities and Essential Duties: • Maintenance and repair of computer driven electro-mechanical manufacturing equipment in support of medical device production. o Computer driven systems include proportional-integral-derivative (PID) operating controllers, programmable logic controllers (PLCs), and Human Machine Interface (HMI) automation. o Sub-systems and components include electric drives, motors, electrical wiring, hydraulics, pneumatics, electrical panels, relays, printed circuit board circuitry, vacuum, and compressed air. • Respond to emergency repair requests through troubleshooting, diagnosis, resumption of operation, and electronic documentation., • Execute preventative/scheduled maintenance including planning of materials, parts, training, and other requirements to ensure work is executed in an efficient and timely manner., • Document all work planned and performed in the computerized maintenance management system., • Evaluate operation of equipment and instruments to conduct on-line adjustments. * Evaluate, quote, and order necessary replacement equipment, tools, and fixtures. * May develop or revise documents and procedures., • Build Quality into all aspects of their work by maintaining compliance to all quality requirements. Minimum Requirements : • A high school diploma or equivalent is required. An associate degree or equivalent years of experience in Engineering, Science or related technical field is preferred, • 1-3 years of technician experience in a manufacturing environment is required; experience working in medical device manufacturing or other FDA regulated industry preferred. Required Knowledge, Skills, and Abilities : • Ability to read wiring diagrams, schematics, and plumbing diagrams to expertly troubleshoot electro-mechanical equipment, electric drives, motors, basic wiring, hydraulics, and pneumatics is required., • Working knowledge of flow controls, valve selection, and pressure regulation., • Must demonstrate effective verbal and written communication skills., • Must be well organized and demonstrate the ability to work independently and manage multiple tasks and priorities., • Must be flexible and demonstrate the ability to take initiative., • Working knowledge of equipment powered by 120, 208/230, and 480VAC electrical voltage is required., • Experience with PLC/HMI and MS-DOS programming languages is preferred., • Proficiency with Microsoft Office products such as Word and Excel or equivalent software applications is preferred. The pay for this role is a minimum of $25 per hour ($52k/yr) and a maximum of $33 per hour ($68,640/yr). About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Driver - Cylinder Location: Newark, NJ.Our Driver Cylinder Handlers are responsible for safely and efficiently operating a local route delivery vehicle to deliver hard goods, compressed gas cylinders and associated products to customer locations.In this role, you also must be willing to communicate

Material Handler (Cylinder Handler) Location: Newark, NJ.This role will be accountable for handling high- and low-pressure gas cylinders and equipment and preparing for shipment.This is a great opportunity to start your career at a leading global industrial gases company!.Additional compensation may

Title: Non-Credit Instructor Department: Assoc Provost Continued Learning Of Reports To: Director, Custom Training Position Type: Staff Position Summary: LDI is seeking instructors with expertise in one or more of the following areas: Technology & Digital Skills: -Computer Science -Robotics and Automation -Coding and Computational Thinking -AI Literacy and Emerging Technologies -Cybersecurity Fundamentals Productivity & Business Tools: -Microsoft Excel from beginner through advanced -Data organization, reporting, and dashboards -Digital collaboration and workflow tools Industrial & Technical Operations: -Electro-Mechanical Maintenance Technician -Multi-Craft Maintenance Mechanic -Automation & PLC Technician -Maintenance Lead or Shift Supervisor Professional & Business Skills: -Data-driven decision making -Project management and Agile methods -Communication and workplace effectiveness -Leadership and change management -Financial literacy and business fundamentals Essential Functions: -Design and deliver customized, skills-based instruction aligned to client objectives and LDI's learning framework. -Develop course outlines, plans, and instructional materials for assigned engagements. -Deliver instruction in person and/or virtually, based on client requirements. -Use project-based, applied, and inquiry-driven teaching methods. -Collaborate with LDI staff and client stakeholders to ensure high-quality delivery. -Maintain clear and timely communication regarding scheduling, availability, and instructional needs. Prerequisite Qualifications: -Teaching, training, or facilitation experience with adult learners or working professionals. -Demonstrated expertise in Excel, Office Suite, data analysis, automation systems, PLCs, maintenance operations, AI tools, or business systems. -Demonstrated expertise in learning management systems and virtual conferencing platforms such as Zoom and Google Meet. -Strong communication and facilitation skills in both in-person and virtual environments. -Relevant certifications, degrees, or substantial professional experience in the subject area. -Equivalent combinations of education and professional experience may be considered. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $45.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Job Description Electrical Engineer, Circuit Design We are seeking an Electrical Engineer to design and program electrical systems. • Ability to work within Electrical Engineering’s R&D and Manufacturing teams, you will be designing and developing state-of-the-art digital controllers & control systems, including related software, for operating our specialized equipment., • PLC- Allen Bradley, Rockwell preferred, not required., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • You will need to possess the ability to work with C, C++. Additional knowledge of languages such as C#, Visual Basic, VBA and Assembler would be a plus, not a requirement, as would be working knowledge of embedded systems, including microprocessors (8 to 32 bit) and support hardware., • Knowledge of industrial data communications protocols would be an asset, although not required., • The ability to read schematics and interpret hardware to facilitate software design is a requirement., • The ideal candidate should have the ability to work with test equipment such as oscilloscopes, logic analyzers, and in-circuit emulators., • Proficiency in AutoCAD, or AutoCAD electrical preferred, electrical design, analysis, and simulation tools, • Panel layout and design preferred, • BOM exposure preferred, not required, • Solid understanding of electronic components and their applications., • Relevant experience in electrical engineering, product design, or a related field., • Demonstrated ability to think creatively and contribute to the development of innovative solutions., • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination. Degree in electrical engineering, Industrial Engineering, Mechanical Engineering and/or Computer Science, similar or equivalency years of experience Looking forward to getting to know you... We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations – manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI’s are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements – takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information • Leadership skills:, • Strong communication with subordinates, peers and management., • Ability to motivate others, • Ability to train and delegate other, • Effectively provide feedback to reports and peers, • Be accountable for the performance of the team’s metrics and its members’ behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving – analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

VML, part of WPP, is a leading creative company that combines brand experience, customer experience, and commerce, creating connected brands to drive growth.VML is celebrated for its innovative and human first, award-winning work for blue chip client partners including AstraZeneca, Colgate-Palmolive

Production Associate (Cylinder Processor).Production Associate to join our team! This role will fill, label, and prepare gas cylinders, and operate a cryogenic liquid filling system while prioritizing safety and attention to detail.Additional compensation may vary depending on the position and organ

We are seeking a hands-on, proactive leader to drive safety, quality, productivity, and employee engagement on the shop floor.In this role, you'll spend the majority of your time working directly with shop floor employeescoaching, mentoring, and empowering them to perform at their best.You'll be the

Linde Gas & Equipment Inc Production Associate (Cylinder Processor) Location: Newark, NJ.Production Associate to join our team! This role will fill, label, and prepare gas cylinders, and operate a cryogenic liquid filling system while prioritizing safety and attention to detail.Additional compensati

Outside Sales experience and demonstrable experience as a territory account manager. Outside Sales Representative (Territory Manager). This position primarily involves meeting existing & future customers face-to-face and traveling to various customer locations within a designated territory.

Buscamos Senior Account Executive, pilar fundamental para el xito de cualquier equipo, como Ejecutivo de cuentas Senior ejecutars una variedad de necesidades de los clientes, desde el desarrollo inicial de contenido hasta la realizacin de investigaciones complejas.

In this critical role, you'll be responsible for ensuring the timely flow of materials to support manufacturing operations, maintaining supplier performance, and driving inventory efficiency. Expedite critical materials throughout the supply chain, including managing dock-to-stock processes. Elevate

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician IV Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Day Shift 7:00am-3:00pm, Monday - Friday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Lead Control Panel Wireman Location: Kearny, NJ Company: About Us Mac Products is a family-owned company and has been in business in Kearny, NJ for the past 60 years. We specialize in providing products and services for the transmission, distribution, and control of electrical power. We are seeking an experienced Lead Control Panel Wireman to manage our wiring team and oversee control panel assembly operations. Position Overview This leadership role involves managing the Control Panel Wireman team, ensuring quality and efficiency in the assembly and wiring of electrical control panels. The Lead Wireman will coordinate workflow, monitor inventory, troubleshoot issues, and maintain a safe, organized work environment. Key Responsibilities • Supervise and lead the Control Panel Wireman team., • Assign tasks, set priorities, and ensure timely completion of projects., • Assemble and wire electrical control panels from schematics and bills of material., • Troubleshoot electrical circuits and control systems., • Monitor materials and wire inventory., • Maintain cleanliness and safety in all work areas. Requirements • Proven experience in electrical control panel assembly and wiring., • Ability to read and interpret electrical schematics and control panel drawings., • Strong troubleshooting skills for electrical circuits and control systems., • Knowledge of 3-phase motor wiring, 120/480 VAC, and 24 VDC power., • Understanding of OSHA electrical safety procedures., • Leadership and team management experience., • Valid driver’s license and basic hand tools required., • Preferred: UL508A wiring knowledge; PLC/HMI familiarity helpful. Benefits • Medical, Vision, Prescription Coverage, • Retirement Plan, • Paid Vacation, Sick Days, Holidays, • Disability Coverage Work Location: In person Company DescriptionFrom humble beginnings more than 50 years ago, MAC has evolved into a field leader and highly recognized producer of high quality equipment and products for the transmission, distribution and control of electrical power. Our fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.From humble beginnings more than 50 years ago, MAC has evolved into a field leader and highly recognized producer of high quality equipment and products for the transmission, distribution and control of electrical power.\r\n\r\nOur fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.

Produce parts to meet master production schedule requirements takt time.

Job DescriptionCompany Description Kreisler Industrial Corporation, part of STS Aerospace, a division of Smiths Group plc, is a global leader in the Aerospace and Defense (A&D) sector specializing in the design, manufacture, and repair of advanced components for both commercial and defense platforms. As part of a multi-site organization, we are committed to operational excellence, regulatory compliance and continuous improvement across our global supply chain. Guided by our mission-Service and Solutions Above All-we are driving our One Aerospace transformation and implementing Epicor Kinetic ERP to enable world-class performance. Job Description STS Aerospace is looking for a Design Engineer that will be responsible for designing of all fixturing and tooling needed by the organization to manufacture assembly and inspect product. • Defining manufacturing methodology with design, manufacturing and process engineers, • Write & edit special process procedures, operating instructions, • Submit technical documents to quality for approval, • Technical support for all personnel, • Continuous Improvement of the process and documentation, • Working with Project management on New Product Development, • Working with tool room and machine shop, • Receives input from manufacturing, process, method and manufacturing engineering, • Rewrite or editing of documentation to capture changes in manufacturing method, • Interpretation of customer specifications, • Mistake Proofing, • Creation of drawings for toolroom and machine shop, • Listen to inputs from production, management, quality, planning and purchasing personnel and use those inputs to improve the process, • Any other projects or designs requested by the Engineering or Production Manager, • Safety – Design with safety of operators and companyQualifications, • Proficiency in CAD/CAM software (preferably CREO/Pro-E), MS office product, Outlook, ERP Systems, • Reading and interpretation of Blue prints and technical specifications, • GD&T, • Fixture design, • Trained in problem-solving skills is important – 5 whys, fishbone diagram, six sigma, etc, • Curious to solve problems, ability to brainstorm and experiment, open to new ideas, problem-solving skills Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description Unique Opportunity with an expanding New Jersey Based Company; Bright and Collaborative Team; New and Interesting Automation System Design and Build Projects. Recession Resistant Industry, Managerial Buy-In towards using best of breed technology to provide top-notch solutions for our essential industry customers. About the role: The PLC Automation Controls Engineer specializes in designing, building, and optimizing automation control systems within a small dedicated team. This role focuses on new system design and build projects as well as system upgrades and optimization, reporting directly to the Engineering Manager. The engineer will develop and integrate PLC programming, HMI interfaces, and network configurations, ensuring seamless electrical automation operations. Desired Skills/Experience: • PLC Systems Design and Engineering experience; should be versed in Ladder Logic., • Experience with HMI Systems Software and user interfaces including customization, configuration and connectivity to the overall system; experience with Intellution (aka: iFIX) and or Wonderware (aka: InTouch) are pluses., • Experience designing systems with Electric Power Scaling to 'Step Up Power and Step Down Power'; should be familiar with Voltage Regulation, Dynamic Response, Impedance Regulation, Power Conditioning/Power Modulation or similar areas., • Experience using Electrical AutoCAD for layout and overall systems design (and customization), • Experience configuring and connecting industrial network communications to PLC Systems; should be familiar with things like EtherNet/IP, Profinet, EtherCAT, Modbus RTU, CanOpen or similar., • Experience with Data or Database connectivity to PLC Automation systems; should be familiar with OPC Servers, PC Drivers/Custom Scripts, PLC-to-SQL modules or similar, • Detail Oriented with Very Strong Oral and Written communication skills, • Experience Designing/Building Electrical Automation Systems for External clients or customers is a plus.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. As a Controls Systems Technician, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in controls, PLCs, communication protocols, and automation. Shift: Sunday to Wednesday - 9:00pm to 7:30am You will... • Maintain compliance with all safety, food safety, and security standards. ● Perform preventive maintenance and routine inspections on assigned automation, robotics and control panels., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in automation, controls and robotics., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced automation, controls and robotics., • Partner with engineering on commissioning of new controls systems., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • 4 - 6 years of experience with conveyor, automation, robotics, PLC troubleshooting/programming, communications protocols (Profi, DeviceNet, Ethernet TCP/IP etc.)., • Advanced understanding of PLCs and automated processes., • Advanced computer skills., • Ability to read and understand drawings, schematics and diagrams. ● In depth experience working with PLCs, HMIs, VFDs etc. to include programming, troubleshooting, repair and maintenance., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude., • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Control Systems Engineer to work on the design of the control system for the company’s Eos integrated stellarator. This role will define the overall control system architecture, select core technologies, design platforms, and manage technical interfaces between all major control subsystems including plasma control, power supply control, cryogenic control, safety systems, and data acquisition. As a senior technical engineer, this role will work closely with subsystem teams, vendors, and collaborators to ensure that the architecture meets real-time performance, reliability, scalability, and regulatory requirements. This role is pivotal in shaping the next-generation control infrastructure for one of the most innovative stellarator-based fusion pilot plants in development. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the definition of the Eos control system architecture (functional, physical, and communication layers)., • Select core technologies for real-time control, SCADA, networking, timing, and data management., • Develop high-level system specifications, interface control documents (ICDs), and system block diagrams., • Oversee integration and coordination of control subsystems., • Ensure consistency across communication protocols (e.g. OPC UA, DDS, Modbus, EPICS)., • Contribute to the selection of PLC/DCS platforms for safety- and mission-critical systems., • Work with the AI/ML and Plasma Control teams to integrate predictive control and digital twin functionality into the architecture., • Support development of conceptual and preliminary design packages, including architecture reviews and validation plans., • Collaborate with systems engineering to ensure alignment with the overall plant functional architecture and TRL maturity goals.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Control Systems, Physics, or related field., • 5+ years of experience in control system design for fusion energy, particle accelerators, large scientific facilities, or similar high-reliability environments., • Strong proficiency with EPICS or TANGO control frameworks, Simulink and MATLAB for system modeling and simulation, SysML/UML for system-level architecture and documentation, and OPC UA, DDS, TCP/IP, PTP/White Rabbit communication protocols., • Experience with high-speed data acquisition, real-time systems, and distributed control., • Knowledge of IEC 61508 / 61511 or other safety-related standards., • Familiarity with PLC platforms (e.g. Siemens, Beckhoff, Allen-Bradley)., • Experience working in multi-disciplinary teams and managing technical vendors., • Hands-on experience with FPGA or embedded systems is a plus., • Previous experience in early-phase fusion device development is highly desirable.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionPosition Description: Electro/Mechanic Company History: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: Responsibilities: \tEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. \tLocates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. \tRemoves defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. \tDetermines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. \tAdjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. \tControls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. \tFabricates repair parts by using machine shop instrumentation and equipment. \tMaintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. \tConserves maintenance resources by using equipment and supplies as needed to accomplish job results. \tProvides mechanical maintenance information by answering questions and requests. \tPrepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. \tMaintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. \tMaintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. \tMaintains safe and clean working environment by complying with procedures, rules, and regulations. \tContributes to team effort by accomplishing related results as needed. \tTroubleshoot PLC hardware, and programing. \tWorking knowledge of control circuits, software knowledge, and relay logic/schematics. \tAbility and or working knowledge of High voltage power. \tRemove place and or program VFD, HMI, and electrical components as needed. \tMaintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. \tClean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. \tRegularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements \tMin 5 years experience \tTechnical or University degree or on-the-job experience a plus Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce \tKnowledge of packing equipment is a plus \tFreezer knowledge a plus \tStrong Sense of Safety \tAbility to walk, bend, stoop, reach, squat and lift up to 50lbs is required. \tColor Vision required. Food safety and quality responsibilities \tEnsure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point \tEnsure quality and safety specifications are met \tDemonstrate food safety and quality, SSOP and GMP policies and procedures \tIdentify employees, processes, and refresher training needed to appropriate management Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $25.00 - $30.00 Hourly

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for a Sr Specialist, Regional Marketing in New York, New Jersey, Philadelphia regions. POSITION SUMMARY: The Sr Specialist, Regional Marketing is responsible for a variety of marketing activities focused on increasing sales of new and current Mitsubishi Electric Trane HVAC US (METUS) customers. They will work directly with the Regional Marketing Management on key initiatives including assessing dealer lead and marketing efforts to develop and implement improvement strategies, and contractor and distributor marketing tool support. ESSENTIAL FUNCTIONS The essential functions of the position include, but are not limited to the following: • Partners with Business Unit contractors, sales staff, and distributor staff to optimize lead management., • Prepares weekly distributor lead reports, and works with dealers, distributors, and BU sales staff to improve lead response and closure rates., • Plans and execute campaigns in conjunction with METUS Corporate Marketing team, outside agencies/contractors, and content developers., • Determines marketing campaign goals, establishes media plan, develops messaging and assets, and rolls out campaign to METUS Business Unit sales team, distributors, and dealers., • Measures campaign success and reports results to management team and Business Unit team., • Increase dealer, distributor, and Area Sales Managers’ utilization of effective sales tools., • Create, implement, and assess the effectiveness of localized tools and marketing assets / content (in conjunction with METUS corporate marketing team or locally sourced contractors)., • Plan and support local events to improve effectiveness of dealers and distributors in marketing METUS products., • Develop and deliver educational content to Business Unit sales staff, Diamond Contractors and Ductless Pros, and Distributor staff to educate them on HVAC / METUS marketing best practices and programs., • Willing to travel up to 40% to for various Company meetings and training both domestically and possibly internationally., • Bachelor’s degree in Marketing, Business, creative tools/digital art or related field., • 3+ years progressive experience in a marketing support role., • 3+ years in customer-facing relationship management, customer training, account management role preferred., • 3+ years progressive experience managing projects involving cross-functional teams., • Demonstrated ability to work well with all levels of internal management, staff and outside clients and vendors., • Basic to proficient with PowerPoint, Excel, Word, and other Microsoft Office products., • Proficient in Content Creation programs (Adobe Creative Suite or similar), project management tools (Jira or similar), Digital Asset Management (DAM) and other marketing related software programs., • Familiar with salesforce, a plus., • Demonstrated interpersonal communication skills, both verbally and written. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. To view the EEO is The Law Poster and the supplement, please click here or visit . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Job Description: This is considered a senior level technician role. As a Maintenance Technician III, you will work with the maintenance team to maintain and repair conveyance, automation and facilities equipment to support operations uptime and improve reliability of our systems. Shift: Wednesday to Saturday - 11:00am to 9:30pm You will... • Maintain compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and participate in network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced mechanical, electrical, and refrigeration., • 3-5 years of experience with conveyor, automation, robotics, and/or refrigeration repair and maintenance including mechanical and electrical operations., • Advanced understanding of machinery and equipment., • Basic computer skills., • Ability to read and understand basic schematics., • Ability to travel as necessary (up to 5%) for business purposes., • High School diploma or equivalent., • Excellent follow through, judgment, and common sense. "Make it happen" attitude., • Mechatronics associates or equivalent preferred., • Competitive hourly rate, 401K company match that vests immediately upon participation, • Generous PTO and additional sick leave, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+ At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job Description Role Purpose: Effective utilization of all Electrical Mechanical Engineering skills to improve our operations, machinery, controls, through the installation of upgrades in PLC, pump controls, systems controls, diagnostics and troubleshooting to improve the daily operation of a High-Quality Foam Production and Fabrication Plant. Responsibilities: · Manage projects assigned by management · Manage engineering and maintenance budgets · Oversees ERMs initiatives · Participate in all new equipment evaluations and recommendations · Working knowledge of Hydraulic, Pneumatic, and Mechanical systems · High level of adaptability and foresight for innovative approaches to problem solutions · Ability to understand and communicate the priorities of our operations · Identification of problem, analysis, and the institution of corrective actions · Assist and/or coordinate complex system of troubleshooting efforts · PLC Programming, Diagnostics, Troubleshooting and Repair · Upgrade current electrical equipment and services · Diagnostic of machinery electrical problems · Design and development of machine control systems to improve operation and reliability · Provide input, supervision, and execution of various new equipment installations and integrations · Supervise hourly employees in the execution of their daily duties and contractors during equipment installations · Formulate and recommend electrical / mechanical improvements and modifications to achieve optimum efficiency · Participation in all new product/process installations · Proposal and purchase of necessary equipment · Maintain a safe and clean environment for all employees while enforcing GMP's and good housekeeping · Serve as coach and mentor to Employee Involvement Teams as required · Executes the necessary action needed to maintain the production of a quality of our products while lowering the total cost of production · Conducts training and motivation to the employees by coaching to improve their efficiency and effectiveness · Define objectives and provide guidance to subordinates · Leads departmental meetings Qualifications: · Working knowledge of Mechanical, Electrical, Pneumatic and Hydraulic Equipment · Knowledge of all types of fabrication, processing machinery, and equipment · Ability to understand and communicate the priorities of the manufacturing operation. · Perform 'hands on' direction to all maintenance workers and employees · Above average diagnostic skills, where a controlled methodical approach is taken to problem solving and troubleshooting · A high level of adaptability and foresight for an innovative approach to new product launches · Sophisticated programming and troubleshooting skills for programmable logic controllers · Bachelor's degree (B. S.) from four-year College or university and five years related experience and/or training or equivalent combination of education and experience · 5 – 8 years related work experience Company DescriptionWoodbridge is a privately-owned company offering innovative material technologies for applications in automotive, commercial, recreational, packaging, healthcare and building products. In addition to manufacturing operations, the company also offers a full array of services including chemical research and development, product and process engineering, tooling, technical support and accredited laboratory testing. Woodbridge operates more than 60 facilities across 10 countries—employing over 7,500 teammates and serving more than 600 customers worldwide.Woodbridge is a privately-owned company offering innovative material technologies for applications in automotive, commercial, recreational, packaging, healthcare and building products. In addition to manufacturing operations, the company also offers a full array of services including chemical research and development, product and process engineering, tooling, technical support and accredited laboratory testing. Woodbridge operates more than 60 facilities across 10 countries—employing over 7,500 teammates and serving more than 600 customers worldwide.

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Project Engineer – Performs commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Senior Project Engineer; and providing guidance to associate project engineers. This role requires the candidate to have technical competency, organizational skills and is expected to work well in a team environment. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including medium voltage systems., • Review system designs for compliance with client facility goals., • Assist with preparing plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment and measure results using test instrumentation., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with project teams to coordinate and execute field activities., • Review and provide input on commissioning project documentation and schedules., • Assist with submitting and maintaining daily commissioning reports., • Assist in the training of Associate Project Engineers., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • BSc/MSc in Electrical Engineering with 2 or more years with mission critical project experience, or relevant and applicable industry experience or a minimum of 4 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Experience in Mission Critical facility commissioning essential., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously and work with limited supervision., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Reasonable understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $110000 to $115000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an Senior Application Engineer to be responsible for initial consultation with the customer, as well as estimating and proposal development for industrial automation solutions including food & beverage, life sciences, and chemical industries. The projects span the range of process control and machine control automation applications. You will also own and develop methods, tools, and processes in estimating and proposal development for the entire enterprise. You will: • Meet with customers to review the technical scope and engineering requirements and work with local E Tech Group Business Development Managers in the sales pursuit process., • Prepare work to be estimated by gathering proposals, blueprints, specifications, and related documents., • Quote normal Control Panel / PLC / HMI projects without much assistance, calling in engineering help only for niche cases., • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents., • Compute costs by analyzing labor, material, and time requirements., • Resolve discrepancies by collecting and analyzing information., • Present prepared estimate by assembling and displaying numerical and descriptive information., • Prepare special reports by collecting, analyzing, and summarizing information and trends., • Maintain cost database by entering and backing up data., • Maintain technical knowledge by attending educational workshops and reviewing technical publications., • Contribute to team effort by accomplishing related results as needed., • Bachelor's degree in Engineering or equivalent experience and educational background, • 5+ years of Industrial Automation experience directly related to design, controls, programming, and electrical engineering, • Past experience of extensive use of the Company's Methods, Tools, and Process specific to estimating and proposal management standards., • Understanding of ERP / Project Costing Systems and parametric estimation tools., • Extensive understand of customer plans, specifications, technical documentation as well as RFQ documentation, • Strong written and verbal communication skills, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes full paid vacation, paid holidays, paid family leave and personal/sick time off.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team drives uptime and operational performance across Formic's growing fleet of deployed robotic systems. Working inside live manufacturing environments, the team diagnoses issues, restores production, and continuously improves system reliability at scale. Fleet Operations operates at the intersection of robotics, controls, and real-world factory execution, ensuring Formic's automation delivers consistent, measurable performance across diverse industrial applications. About the role: As a Robotics Field Service Engineer, you are the front line of technical ownership across Formic's deployed robotic cells. You will diagnose failures, restore systems to production, perform preventative and corrective maintenance, and represent Formic directly within customer facilities. This is a hands-on, high-accountability role in uptime-critical environments. Success requires strong troubleshooting discipline, calm execution during production interruptions, and structured documentation. Your work directly impacts fleet performance, customer satisfaction, and long-term system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems quickly, • Provide hands-on technical support to customer operators and maintenance teams, • Log service activity, asset updates, and spare part requirements in CMMS systems, • Coordinate field scheduling and support with customers, vendors, and internal stakeholders, • Monitor system performance remotely using Formic dashboards and fleet tools, • Document service work, root cause analysis, and follow-up actions with clarity and precision, • Identify recurring failure patterns and escalate systemic risks for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Operate with strict adherence to safety standards, including LOTO and industrial compliance, • Participate in RCA sessions, audits, and continuous improvement initiatives, • 3+ years of hands-on field service experience supporting robotic or industrial automation systems, • Strong troubleshooting skills across electrical, mechanical, PLC, or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service documentation, • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$29—$44 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job Description Instrumentation Controls Technician Location: Lyndhurst, NJ Schedule: Monday – Friday | 2:00 PM – 10:30 PM (2nd Shift) Pay: $35 – $40 per hour Type: Contract-to-Hire Are you the kind of person who can look at a control panel, hear a weird machine noise, and immediately start diagnosing the problem in your head? If PLCs, instrumentation, and troubleshooting industrial equipment are your thing, this could be a great fit. We are seeking an Instrumentation Controls Technician to support a busy manufacturing facility in Lyndhurst, NJ. In this role, you will work with plant systems, instrumentation, and control equipment to ensure operations run safely and efficiently. You will also help maintain calibration programs, troubleshoot automation issues, and support plant operations when technical challenges arise. If you enjoy solving technical problems and working hands-on with equipment and control systems, this is a strong opportunity with a company that values technical expertise. What You'll Do * Troubleshoot and maintain PLC and control systems supporting plant equipment * Maintain and repair instrumentation, sensors, and electrical systems * Analyze and test computer control systems based on system design specifications * Support machine operating systems and control programs * Perform instrument calibration and calibration documentation * Manage calibration schedules and maintain compliance with ISO 9000 requirements * Diagnose issues with labeling equipment and automated systems * Perform scheduled maintenance on electrical and electronic devices * Provide rotational weekend on-call support for plant operations when required What We're Looking For * Strong troubleshooting and analytical skills * Solid electrical and controls background * Experience with PLCs (Allen-Bradley preferred) * Experience with pneumatic and hydraulic systems * Ability to read technical drawings, P&IDs, and ladder logic diagrams * Experience performing instrument calibration * Strong communication skills and ability to work independently or on a team * Experience in industrial manufacturing environments such as chemical, pharmaceutical, or food processing is preferred * Technical school training or related degree preferred * Experience with CMMS systems and smart instruments is a plus Additional Details * Schedule: Monday–Friday, 2:00 PM – 10:30 PM * Pay: $35–$40/hour * On-Call: Weekend rotation for plant support * Position Type: Contract-to-Hire * Location: Lyndhurst, NJ About Zing Recruiting Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZINGZIP #ZINGNJ Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job Description URGENTLY HIRINGIndustrial Electricians for leading Aerospace Manufacturer! Pay: $38.04 --> $40.30 after 12 months Location: Dover, NJ $5,000 sign on bonus after 90 days! Responsibilities • Locate and repair electrical failures and malfunctions on equipment such as heaters, elements, fuses, lights, contacts, etc., • Repair and install electrical systems and equipment such as motors, transformers, wiring, alarm systems, automatic control systems, etc., and rebuild motors including bearings and armatures., • Understand and apply schematics and electrical blueprints in the troubleshooting of electrical systems, programmable controllers and associated systems., • Assist in the training of less experienced electrical personnel., • Perform all new electrical installations working from schematics and/or blueprints., • Complete and abide by all safety procedures and training classes provided as standard to all Maintenance colleagues within the department., • Perform all duties of an 'A' Electrician when necessary., • Frequently interact with manufacturing personnel internally and with contractors and suppliers externally., • Electrical repair experience, particularly with 480V systems, • Ability to understand and apply schematics and electrical blueprints, • Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, automated systems, PLCs, and industrial controllers, • Proficiency in troubleshooting, pulling wire, bending conduit, VFD installation, and electrical wiring, • High school diploma or equivalent, • Minimum of 6 years of work experience in a manufacturing environment in an Electrician role, • US citizenship to meet Export Control Regulations, • PLC experience is a plus, • Ability to interpret blueprints Benefits: You will be eligible to participate in the Company’s employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: • 3% of your eligible compensation regardless of whether you contribute to the plan, and • 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: • You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Company’s Vacation Policy, in addition to Company recognized holidays. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Maintenance Mechanic Job Description We are seeking a dedicated Maintenance Mechanic for our weekend night shift. The ideal candidate will have experience in troubleshooting and repairing manufacturing equipment, and will be responsible for performing repairs and preventative maintenance on facility and manufacturing equipment. You will work closely with the Senior Maintenance team to ensure the smooth operation of plant mechanical and building equipment. Responsibilities • Assist Senior Maintenance in maintaining plant mechanical and building equipment., • Install piping and mechanical equipment as directed., • Troubleshoot and repair routine mechanical failures or malfunctions., • Acquire knowledge of hydraulic and pneumatic systems., • Assist in construction and repair of all plant equipment., • Keep records as required., • Perform duties of a B Maintenance Mechanic., • Perform other duties as assigned by supervision., • Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, and automated systems., • Ability to read and interpret schematics., • Proficiency in PLC programming and troubleshooting., • Strong mechanical and electrical skills., • Ability to perform preventive maintenance and repairs., • Knowledge of pneumatics, hydraulics, and blueprint interpretation., • Must have a high school diploma or equivalent., • Minimum of 6 years of work experience in a manufacturing environment in an Electrician role., • PLC experience is a plus., • Ability to interpret blueprints. Join a company that values stability and offers competitive pay along with a comprehensive benefits package. Enjoy benefits such as paid vacation based on service length, 13 paid holidays per year, and a 401(k) Retirement Savings Plan with potential company match. Receive medical, prescription drug, dental, and vision benefits upon hire. Benefit from an Employee Assistance Program, tuition assistance, and a free fitness center membership. External candidates are eligible for a $2500 sign-on bonus after 90 days of employment. Work Environment Work in a heavy industrial casting plant where you may be exposed to elements when walking between buildings. The role requires adherence to safety protocols and maintaining a clean and orderly work environment. Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $69825.00 - $69825.00/yr. Benefits: You will be eligible to participate in the Company’s employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: • 3% of your eligible compensation regardless of whether you contribute to the plan, and • 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: • You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Company’s Vacation Policy, in addition to Company recognized holidays. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Description Every minute of every day, Smiths Detection’s threat detection and security screening technology helps to protect people and infrastructure, making the world a safer place. Smiths Detection, part of Smiths Group is a global leader in the development, manufacture and management of security and detection solutions designed to make the world a safer place. Our technology provides threat detection and screening solutions for customers in our key markets: aviation, ports and borders, defence, and urban security. Our expertise spans 21 global offices, seven manufacturing sites and five R&D centres, with a global network of 3,000 dedicated colleagues contributing towards over 40 years at the frontline of advances in safety and security. This results in careers built on variety and the opportunity to work on a range of state-of-the-art solutions, where you can develop your knowledge and experience every day. Job Description This position requires daily travel to locations in and around the Newark area, including the airport. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: • Responsible for meeting daily service repair needs and driving customer satisfaction, • Installs, repairs and maintains equipment in the field; provides customer training as required., • Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, • Possesses basic technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication, both oral and written, • Establishes and maintains a close relationship with senior level FSE’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as required.Qualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 1-3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation PHYSICAL/MENTAL REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multi task several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be able to push/pull 200 lbs., • Must be able to move/ manipulate equipment weighing up to 1000 lbs. with the assistance of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires frequent bending, stooping, twisting, turning, and working in unusual positions requiring full body mobility. Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. This position may require Sensitive Security Information (SSI) access and vetting via the TSA. If required, applicant must successfully pass a federal background investigation. This position may require a U.S. Personal Security Clearance. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. HIRING SALARY RANGE: $49,280 - $99,600 per year. (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . Smiths Detection is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity PostersIf you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection, Inc. participates in the Electronic Employment Verification Program. #SDNA We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ

Job DescriptionGrow your career with a mission-driven leader At Morris Group, Inc.—a third-generation, family-owned Top Workplace—our purpose is to help manufacturers in the United States win on productivity. As a CNC Systems Field Support Specialist, you’ll be a trusted on-site expert who keeps mission-critical machine tools performing at their best. Why this role matters • Uptime is everything: you’ll install, commission, calibrate, maintain, troubleshoot, and repair CNC machines and accessories at customer sites., • Customers rely on your expertise for operator training, system networking, software setup, preventive maintenance, alignments, major component swaps, overhauls/refurbs, upgrades/retrofits, and machine un-installs., • Your insights travel: you provide a direct communication link to the Service Group of the Robert E. Morris Company and pass along voice-of-customer feedback to strengthen our brand loyalty., • You’ll document work and manage cases in Salesforce Lightning Customer Support. What you’ll bring, • Ability or willingness to learn to interpret mechanical drawings; electrical/pneumatic/hydraulic schematics; PLC ladder diagrams; and to use diagnostic test equipment to resolve issues across electrical, mechanical, electro-mechanical, and control systems., • Strong verbal and written communication with a polished, professional presence; confidence interacting with customers and colleagues by phone and in person., • Comfort with change and shifting priorities; steady under pressure., • PC literacy with MS Word, Excel, and Outlook., • Electro-mechanical aptitude (motors, drives, transformers). Experience in machine tool manufacturing/installation/operation/maintenance/repair or a broad shop background is a plus., • Logical troubleshooting, mechanical reasoning, and sound decision-making. Where you’ll work, • On the road daily from home to customer facilities within your territory, with occasional overnight hotel stays for remote jobs or training., • Typical environments include machining/manufacturing settings with exposure to noise, electricity, chemicals, heavy equipment, and other automated/manual machinery; you’ll also spend time in office and training environments at the Robert E. Morris Company. Tools & technologies you’ll service, • CNC Mill (3–4 axis VMC): Fanuc, Mazak, Haas, Okuma, Doosan, Makino, DMG Mori Seiki, • CNC Lathe (2–4 axis): Mazak, Haas, Okuma, Doosan, DMG Mori Seiki, • CNC Mill (5+ axis VMC): Fanuc, Mazak, Haas, Okuma, Kitamura, DMG Mori Seiki, • CNC Lathe (5+ axis): Mazak, Okuma, Doosan, DMG Mori Seiki, • PLCs: Fanuc, Allen-Bradley, Siemens, • Variable Frequency Drives (VFD) and servo motors Core proficiencies, • CNC Machine Repair, • Electrical Troubleshooting, • HVAC Service & Installation, • Troubleshooting CNC Machines Rewards & benefits, • Competitive starting pay, • Market-competitive health benefits, including a zero-premium medical option; vision, dental; company-paid life insurance, • 3+ weeks of vacation to start, • 10 paid company holidays, • 401(k) with company contribution; tuition reimbursement, • Employee appreciation events, perks, and an Employee Assistance Program Also important, • Perform related duties as required., • Responsibilities listed are illustrative and not exhaustive; similar work may be assigned. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description Senior Global Supply Chain Manager, Aerospace and Defense STS Aerospace, a division of Smiths Group plc, is a global leader in the Aerospace and Defense (A&D) sector specializing in the design, manufacture, and repair of advanced components for both commercial and defense platforms. Guided by our mission-Service and Solutions Above All-we are seeking a highly experienced, results-driven leader to strategically direct global supply chain activities, champion our One Aerospace transformation, and positively influence the implementation of Epicor Kinetics across multiple sites. The Senior Global Supply Chain Manager will lead strategic sourcing and procurement across multiple international aerospace sites, driving global standardization and operational excellence. This role is accountable for developing and executing comprehensive sourcing strategies, building a high-performing supply chain organization, and ensuring supplier performance meets the stringent requirements of the aerospace and defense industry. Success requires deep expertise in regulatory compliance, AS9100 quality standards, ITAR/EAR controls, and the ability to manage complex commercial and defense contracts while delivering cost optimization and risk mitigation. The ideal candidate will demonstrate a proven track record in strategic sourcing with a focus on total cost of ownership (TCO) and risk mitigation in a complex, multi-site manufacturing environment. They must possess a cross-functional understanding of Sales, Inventory, and Operations Planning (SIOP) and excel in negotiations, cost reduction, inventory optimization, customer service, supplier relationship management and compliant, ethical sourcing practices. Responsibilities • Develop and execute global supply chain strategies that align with business goals for cost, quality, and delivery performance., • Lead, mentor and build a high-performing team of sourcing, procurement and logistics professionals across multiple international sites., • Establish and maintain strategic supplier relationships ensuring on-time delivery, quality conformance, and adherence to aerospace standards., • Oversee the full procurement lifecycle, including vendor development, qualification and onboarding, and contract negotiation and administration, ensuring compliance with applicable laws/regulations., • Implement proactive risk mitigation strategies to address geopolitical challenges, material shortages, or supplier performance issues., • Drive continuous improvement initiatives using Lean and other methodologies to optimizing processes, reduce costs, and enhance efficiency., • Collaborate cross-functionally with Business Development, Engineering, Production, Quality, and Program/Project Management to integrate supply chain activities and achieve strategic objectives., • Manage inventory optimization and materials planning ensuring accurate forecasting and efficient resource allocation., • Monitor industry trends and emerging technologies to maintain a competitive and innovative supply chain., • Define and track KPIs providing actionable insights and performance reports to senior leadership., • Lead supply chain standardization and compliance efforts as part of the multi-company Epicor Kinetic ERP implementation., • Champion and create a global supply chain strategy that encourages/strengths supplier partnership and leverages ERP capabilities for operational excellence., • Oversee end-to-end supply chain operations and ERP integration, aligning global strategies with data-driven workflows and best practices., • Skills, • Leadership & Influence: Drive transformation by inspiring teams, championing change, and securing buy-in across regions and cultures., • Strategic Communication: Deliver clear, concise messaging to executives, cross-functional teams and suppliers to align objectives and foster collaboration., • Strategic Thinking: Align supply chain with business goals while anticipating risk and identifying opportunities., • Adaptability & Resilience: Thrive in dynamic, fast-paced environments with shifting priorities and complex challenges., • Integrity & Compliance: Ensure ethical sourcing, regulatory adherence, and maintain a strong safety-first mindset., • Emotional Intelligence: Foster trust and strong relationships through empathy, active listening and collaboration., • Team Development: Coaching and mentoring to build high performing, engaged teams., • Culture Building: Promote a positive, “can do” attitude and continuous improvement across all levels., • Change Management: Lead cultural and operation shifts by overcoming resistance and embedding new ways of working., • Negotiation & Contract Management: Skilled in securing favorable terms and managing complex agreements., • Analytical Problem Solving: Apply root-cause analysis and data-driven insights for swift, informed decision-making., • Global Mobility: Open to domestic and internationally travel to support business objectives.Qualifications Qualifications • Education: Bachelor’s degree in supply chain management, Engineering, Business, or a related field is preferred., • Experience: Minimum of 10+ years of progressive supply chain leadership experience, including significant exposure to A&D manufacturing environment., • Regulatory Knowledge: Strong knowledge of aerospace quality and regulatory standards including AS9100, ISO 9001, ITAR, and FAR/DFARS compliance., • ERP Proficiency: Demonstrated experience with Tier-1 or Tier 2 ERP systems for procurement and materials management; ERP implementation experience highly desirable (Epicor Kinetic preferred)., • Citizenship: US Citizenship required to comply with export control regulations. Additional Information Location is Flexible: Prefer near Elmwood Park, NJ, Springfield, MA or Laconia, NH All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionProvides administrative and secretarial support for the vice president and department. RESPONSIBILITIES • Monitors and oversees facility operations for a large biotech site., • Troubleshoots and performs repairs on system issues involving electronic, electrical, pneumatic, hydraulic, and mechanical devices, Johnson Controls Metasys BMS, utility, and water systems., • Supervisor in charge of facility housekeeping staff for second shift., • Generates work orders in SAP, participates in site emergency response and Hazmat activities. Novartis Pharmaceuticals 01 Sep 2005 - 01 May 2014 ENGINEERING TECHNICIAN 1216 5th Avenue New York NY , 10029 OK to contact this employer? - No RESPONSIBILITIES • Repaired, maintained, and calibrated pharmaceutical manufacturing, production and packaging equipment.