Plc jobs in Dallas, TexasCreate job alerts

Job Description We are currently seeking for a Maintenance Technician with experience working with machines in the production line. This position involves Below will be listed the qualifications and responsibilities for this position. The responsibilities as listed below are meant to be a general guideline. Responsibilities and Qualifications: • Enforce a safe working environment., • Establish and maintain good housekeeping., • Wear all PPE and comply with all GMP standards., • Perform periodic safety checks of your assigned area., • Use proper lockout/tagout procedures., • Experience with installation of wiring and conduit., • Knowledge / experience with National Electric Code, • Skill and experience troubleshooting and repairing industrial HAVC equipment., • Familiar with HDPE Pipe production line machines., • Ability to use PC to troubleshoot PLC operated equipment., • Standing and walking for extended periods of time., • Frequent squatting, bending, stooping, sitting and stretching., • Ability to exert force and torque to hand tools, and application of force to remove/replace equipment components., • Frequent lifting/carrying of parts, tools, components, with occasional lifting of up to 50 pounds. This is a temp-to-hire position. With overtime as required to meet plant needs. If you are a compassionate individual who enjoys working to prevent injuries to yourself and those around you and thrives in a fast-paced environment, we encourage you to apply for this opportunity. Company DescriptionTimeLine Staffing is a trusted, family-owned staffing agency proudly serving the Dallas-Fort Worth metroplex since 2007. We specialize in connecting top talent with leading employers across industries including warehouse, logistics, skilled trades, and clerical support. With over 18 years of proven success, our team is committed to fast, high-quality placements, honest communication, and real results. As a BBB A+ Accredited business and active members of ASA, TAS, and WBENC, TimeLine is driven by values of transparency, integrity, and service. We’re growing — and we’re looking for motivated, reliable professionals to grow with us.TimeLine Staffing is a trusted, family-owned staffing agency proudly serving the Dallas-Fort Worth metroplex since 2007. We specialize in connecting top talent with leading employers across industries including warehouse, logistics, skilled trades, and clerical support.\r\n\r\nWith over 18 years of proven success, our team is committed to fast, high-quality placements, honest communication, and real results. As a BBB A+ Accredited business and active members of ASA, TAS, and WBENC, TimeLine is driven by values of transparency, integrity, and service.\r\n\r\nWe’re growing — and we’re looking for motivated, reliable professionals to grow with us.

Job Description Are you looking to join one of the fastest growing Mexican food companies in the world? Here at MegaMex Foods, our purpose is to Reimagine Mexican Flavors. MegaMex was born in 2009; we have found our niche in bringing unique and traditional Mexican flavors to dinner and restaurant tables around the world. Opportunities are endless with our locations domestic and international including the Orange Office, Distribution Center in Saginaw, Manufacturing Plant in Dallas, and several plants in Mexico, Colombia, and Peru. At the core of who we are is Together – Juntos. Together, we bring the spirit of Mexico to every table. We value different backgrounds and work experiences as they provide new ideas and ways to Reimagine Mexican Flavors. We aim to drive a culture where everyone feels valued, respected, safe, and free to be themselves. We are Juntos! 2nd, and 3rd SHIFTS AVAILABLE Major Primary Duties: Performs specific preventative maintenance, mechanical and electrical repair, troubleshooting and other tasks to keep packaging, processing, and other facility equipment in optimal operational condition • Responsible for maintaining logs & documentation on operating conditions, performance & problems, • Communicates, identifies and solves problems by working with other team members and departments, • Must comply with all Company safety rules, along with GMP’s and USDA regulations, • Ensures the safe and appropriate operation of equipment by proper diagnosis, repair and maintenance of the plumbing, electrical, and HVAC systems, • Assists in performing work on production/processing machinery and other mechanical equipment and buildings, • Duties include repairing and maintaining machinery, mechanical equipment and computerized systems, such as pumps, conveyor systems, and motors, in accordance with diagrams, blueprints, operating manuals, or manufacturer’s specifications, • Confers with operators and observes, tests, and evaluates operation of machinery and equipment to diagnose cause of malfunction., • Daily chemical testing and logging all test results, making adjustments required to maintain refrigeration & Utility system within established limits., • Safe and efficient operation of refrigeration, steam generation and all utility systems, • Welds to repair broken metal parts and assemble new equipment, • Works on PLC controls, VFD drives and demonstrates a good understanding of instrumentation, • High School Diploma or Equivalent GED, • Industrial Maintenance certification preferred, • Must be able to work in a team environment or individually, following all Process Safety Management (PSM), as well as all company policies and regulations, • Maintains paperwork for PM’s scheduled in house audits and annual inspections

Job DescriptionJob Title: Maintenance Technician Job Description We are seeking a skilled Maintenance Electrician with a minimum of 2 years of maintenance experience and 1 year of PLC experience, specifically in the context of metalworking machinery, CNC, and machine shop equipment. The ideal candidate will be proficient in working with Siemens systems and have a general knowledge of DC controls, AC 24V to 480V, basic wiring, and motor control circuits. Additionally, the ability to read blueprints and schematics, along with a strong understanding of pneumatic and hydraulic components, is essential. The role requires excellent electrical and mechanical troubleshooting skills and a strong ability to work collaboratively with team members. Responsibilities • Perform maintenance and repair on metalworking machinery, CNC, and machine shop equipment., • Utilize PLC experience to ensure efficient operation of equipment., • Work with Siemens systems and manage DC controls, AC 24V to 480V, basic wiring, and motor control circuits., • Interpret blueprints and schematics accurately., • Apply a strong understanding of pneumatic and hydraulic components., • Exhibit proficient electrical and mechanical troubleshooting skills., • 2 years of maintenance experience with 1 year of PLC experience., • Experience with Siemens systems., • General knowledge of DC controls and AC 24V to 480V., • Ability to read blueprints and schematics., • Strong knowledge of pneumatic and hydraulic components., • Electrical and mechanical troubleshooting skills., • High School diploma or equivalent.] Join a supportive and inclusive workplace where team collaboration and personal growth are prioritized. Enjoy the benefits of a culture that values your contribution and offers opportunities for advancement. Discover more about the benefits provided at our careers page. Work Environment Work in an extremely clean, organized, and safe high-pressure turbine blade overhaul facility. The environment is climate-controlled, ensuring comfort and safety while performing your duties. Job Type & Location This is a Contract to Hire position based out of Grand Prairie, Texas. Pay and Benefits The pay range for this position is $34.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Grand Prairie,TX. Application Deadline This position is anticipated to close on Oct 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Pay $20.00-$30.00 Based on Experience We are currently seeking a Maintenance Tech to join our team! You will be responsible for completing work orders and other required tasks. Responsibilities: • Complete work and repair orders in a timely fashion, • Estimate time and extent of repairs, • Perform routine preventive maintenance, • Maintain material and supply inventory, • Oversee work performed by outside contractors as necessary, • Previous experience in production maintenance or other related fields, • Familiarity with maintenance tools and equipment, • PLC troubleshooting, • Experience working with electricity up to and including 480 V, • Ability to handle physical workload, • Deadline and detail-oriented, • Spanish is a necessity, • Company DescriptionA company with a heart. A turnkey solutions company for food packaging needs.A company with a heart. A turnkey solutions company for food packaging needs.

Job Description PROMAN Staffing has partnered with our client, an industry leader in automotive filtration and technology to source and hire a skilled Maintenance Technician III to join their Grand Prairie, TX team in maintaining and troubleshooting complex electrical and mechanical systems in a manufacturing environment. This is a direct hire opportunity with long-term growth potential. Maintenance Technician Responsibilities: • Inspect, install, modify, and repair electrical/electronic systems (24V–480V AC, DC, single/3-phase), • Troubleshoot and repair industrial machinery, PLC systems, and control circuits, • Perform preventative maintenance and equipment calibrations, • Read blueprints and schematics; maintain detailed work records, • 3+ years of electrical/electronic maintenance experience, • Strong mechanical aptitude and safety practices, • Experience with PLC programming, troubleshooting, and repairs, • Ability to work independently and as part of a team, • Tools and cell phone required, forklift certification a plusCompany DescriptionOur driving force is innovation and a vision that reaches beyond today, guiding our team to continually improve on the way we do things. We are a leader in providing industrial staffing solutions on a permanent, temp-to-perm, or temporary basis. PROMAN Staffing can handle any of these and much more. Our industry-specific expertise, quick response time and the investment we make in both our customers and our employees have allowed us to quickly become the staffing partner of choice. Our industry-specific expertise, quick response time and the investment we make in both our customers and our employees have allowed us to quickly become the staffing partner of choice.Our driving force is innovation and a vision that reaches beyond today, guiding our team to continually improve on the way we do things. We are a leader in providing industrial staffing solutions on a permanent, temp-to-perm, or temporary basis. PROMAN Staffing can handle any of these and much more. Our industry-specific expertise, quick response time and the investment we make in both our customers and our employees have allowed us to quickly become the staffing partner of choice. Our industry-specific expertise, quick response time and the investment we make in both our customers and our employees have allowed us to quickly become the staffing partner of choice.

Job DescriptionDescription: Job description Sugaright in Dallas is seeking an experienced Maintenance Technician for Nights/Days. This is an opportunity to get in on the ground floor and help us grow! Job Purpose Summary: Provide maintenance support to the plant activities in repair, maintenance and installation of machines, tools, and equipment, and in maintenance of buildings, grounds, and utility systems. This includes performing preventative maintenance, repair, and upgrades to optimize efficiency, increase productivity, and assure safety. Openings on multiple shifts. Essential Functions (include but are not limited to) • Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Inspect and maintain the operating production machinery and equipment in a manner that conforms to Local, State, and Food Safety Standards., • Follow the company’s guidelines for Good Manufacturing Practices when performing the requirements of Maintenance Mechanic., • Examine, inspect, repair, or replace components, including PLC & PID controls, to maintain operational standards and efficiencies of the company in all areas needed., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Assist Plant Manager on training and indoctrination of workers to improve work performance and acquaint workers with Emergency and Preventive Maintenance on production machinery and equipment., • Electrical experience a must, • MIG and TIG welding, sanitary welding experience a plus, • Safely and properly set up and operate tools and machinery required to maintain production machines and equipment. Maintain and repair all production equipment: pumps, high pressure pumps, dryers, valves, etc., • Maintain and repair all support equipment: boiler, air-compressors, air conditioning units, wastewater meters, water meters, etc., • Must have a working knowledge of and experience in plant maintenance operations., • Handling of chemicals for support equipment operation. Chemical testing of boiler feed water, condensate, cooling tower water, plant process water., • Daily utilities reading., • Fabrication and manufacturing of equipment for production needs; product and process piping, sanitary equipment, steam lines, chemical lines, pneumatic lines, etc., • Documentation of all schematic and diagram changes to keep plant record current., • Must be able to work with a minimum amount of supervision in all key areas., • Responsible for reporting daily work orders and activity reports., • Responsible for all work being done in a timely fashion and done properly., • Responsible for the care and maintenance of company tools., • Must have the ability to troubleshoot problems and be persistent until a solution is found., • Report immediately to Safety Manager, Maintenance Manager, Operations Manager or Shift Coaches of any damage, irregular activity, or unsafe conditions concerning equipment., • Follow GMP’s and SQF Standards., • Follow all safety and working rules., • Must have the ability to get along with co-workers, management personnel, customers, vendors, and employees in accordance with the company policies and working rules while ensuring a harmonious and conducive work environment., • Maintain a positive attitude and contribute towards a quality environment., • Excellent regular full-time attendance in support of company objectives. Job Type: Full-time Benefits: 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Professional development assistance Referral program Tuition reimbursement Vision insurance Schedule: 12-hour shift - 3-2-2-3 balanced shift schedule Holidays On call Overtime Requirements: EDUCATION AND/OR EXPERIENCE: High School diploma or equivalent, and more than three years’ experience with maintenance of production machinery, electricity, and pumps. Preferred- * Certification in mechanical, electrical, or industrial maintenance or equivalent work experience in a manufacturing, production environment preferred and completion of a craft apprenticeship, or an equivalent number of years of education and plant facility maintenance experience. PHYSICAL DEMANDS/WORKING ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Ability to work in dusty, wet, hot, or cold environments for extensive periods of time. · Requires prolonged sitting and standing, bending, stooping, and climbing. · Requires eye-hand coordination and manual dexterity sufficient to operate a keyboard, photocopier, telephone, calculator, and laboratory equipment. · Requires normal range of hearing and vision (including colors) to record, prepare and communicate appropriate reports. · Requires lifting up to 50 pounds. PI278633854

Job Description HiFyve is hiring a Maintenance Technician in Garland TX. Pay: $35 - $45/hr (based on experience) Schedule: 3rd shift 7:30 pm – 6 am A side Monday thru Wednesday, B side Wednesday thru Friday. A side and B side rotate weekends Benefits: • Competitive wage (DOE), • 4 weeks of PTO starting out per year!, • Paid holidays & vacation, • Company paid for Health, Dental, and Vision Insurance Key Responsibilities: • Understanding of electrical schematics and documentation, • 480V 3 phase troubleshooting and wiring, • Low voltage controls, • VFDs and servos, • Welding to include: MIG, TIG, and Arc, • pumps, valves, gearboxes, • Strong mechanical aptitude, • Pneumatic and hydraulic systems operation, • Mill and lathe, • Allen Bradley PLC knowledge to include SLC 500, PLC 5 and Logix 5000 (troubleshooting and program understanding), • Familiar with conveyors, palletizing equipment, case packers preferred, • Utilities boilers, air compressors, and ammonia refrigeration, • Waste water systems Qualifications: • 3 years of industrial maintenance experience., • Ability to troubleshoot Allen Bradley PLC's through a CPU. Familiar with Ladder Logic and RS Logix., • Tabaco Free. If you're interested, apply today!

Job Description WHO WE ARE At KNAPP (pronounced K-NAP, not Nap!), we “Make Complexity Simple” by offering intelligent solutions for digitizing and automating everything from production and distribution to the last mile and stores. We are the customer’s value tech chain partner, which means partnering with the customer to create the most value within each link in their supply chain. Leveraging the latest software, AI and Robotics technology, we continue to disrupt the logistics automation industry for the world’s industry leaders in grocery, healthcare, retail, e-commerce, apparel & manufacturing. We are a global company with our US headquarters located just North of Atlanta in Kennesaw, GA. KNAPP specializes in automated solutions for both WMS (Warehouse Management Systems) and WCS (Warehouse Control Systems) for B2B (Business to Business) and B2C (Business to Consumer) customers. We are a growing company of over 7,200 employees worldwide and in over 50 countries that is privately held, with 7% of our revenue reinvested in R&D, ensuring a strong and vibrant future! Join us and see how you can help change the world! For more information, visit . WHAT YOU GET TO DO As a Resident Maintenance Technician, you will be expected to provide industrial Electrical/Mechanical expertise and be part of a team that works to maximize equipment utilization and efficiency. Essential Functions and Responsibilities: • Rectify electro-mechanical faults and specialist technical assistance as a support technician, • Respond to emergency calls on Customer sites, • Be safety conscious in all activities, demonstrate a track record of owning problems and promote successful completion of the tasks, • Provide first-class response to Customer, ensuring as reasonably and practical as possible a first-time right policy, • Provide emergency breakdown and specialist maintenance support, • Handle set up and calibration of precision automation equipment, • Create strong effective working relationships with Customer and their operational agents to enable KNAPP to provide superior service, • Achieve performance in terms of expected output, speed of response, quality of repair and standards of workmanship, • Train customer’s maintenance team as required, • Provide experience and expertise in the installation of conveyor and precision automation equipment, • Maintain quality of service by ensuring effective communication with customers, • Ensure that reports are well written and legible, • Execute site quality procedures, safety procedures, and any statutory procedures, • Participate in regular meetings with the Maintenance Shift Supervisor or Resident Site Manager or Site Maintenance Manager to discuss activities and progress, unless there is no on-site accountability in which case you would provide that information to the Resident Business Manager, • Provide specialist maintenance service support to the Customer’s installed system, • Ensure that all spare parts usage issues are logged appropriately and promptly with the KNAPP Spare Parts team, • Ensure proper care and maintenance of the tooling and equipment are provided, • Provide flexibility and the best use of skills and capabilities, • Ensure that all time sheets and documents are accurate and legible; to be submitted to KNAPP on biweekly basis for approval, • Experience in mechanical strip-down/reassembly, basic field wiring, machine calibration and system testing, • Ability to work against a timeframe to complete reactive repairs, • Interact with on-site management keeping them informed of repair and maintenance progression and addressing their concerns in a professional manner, • Show hands-on ownership of issues to achieve a quick time resolution, • Ability to appreciate health & safety considerations with regard to given tasks and to carry out risk assessments, • Mechanical aptitude, including the ability to read assembly drawings, • Ability to operate hand tools and assemble parts onto equipment, • Ability to follow set up instructions, assembly drawings and checklists, • Strong attention to detail and exceptional follow-up skills, • Excellent communication and customer service skills with both internal and external Customers, • Computer literate with basic Microsoft Office skills, • Willingness to learn and adapt to changing role requirements, • Appreciation of cultural diversity WHAT YOU HAVE • Degree in Electrical and/or Mechanical Engineering or equivalent work experience, • 3 - 8 years of verifiable progressive experience as a Maintenance Repairman, Maintenance Electrician, Machine Repairman, or Industrial Maintenance Engineering, • Demonstrated experience in providing repairs on various types of machinery systems, including electrical, mechanical, pneumatic and hydraulic systems, • Bilingual (English/Spanish) and or (English/German) preferred but not required, • Extensive experience in equipment maintenance, modifications and design preferred, • Strong problem-solving capabilities, • Talent and commitment to provide a unique interpretation or analysis of our systems to customers, • Process-oriented mentality, • Theoretical and operational experience in the repair, troubleshooting and maintenance of PLC-based machinery, highly automated and robotic equipment and control systems, • Network equipment interfaces, a plus, • Hands-on experience and a team player committed to improve processes, • Experience in reducing costs through processes and efficiencies, • Strong verbal and written communication skills Working Conditions and Environment: • Basic technical understanding, • Weekends and overtime as required by work, • Occasional travel required, • Authorization to work in the U.S. and/or Canada, • Passport or ability to obtain passport, • Professional office etiquette is required at all times, • Physical requirements may include:, • Sitting, squatting, walking, reaching out to arm’s length, reaching over-head, lifting between 50-100 pounds, and reading WHAT YOU WILL GET • Industry competitive compensation, • Great benefits with better than average employer contributions, including health, dental, vision, life insurance, Flexible Spending Accounts, Short & Long Term Disability and more!, • 401k with a very generous employer match and no vesting!, • Paid Vacation & Holidays, • Profit Sharing, • Paid Parental Leave, • Subsidized child-care, • Tuition Reimbursement, • Pet Insurance, • Corporate Social Responsibility including recycling, sustainability and volunteering KNAPP is an equal opportunity employer. We are committed to a work environment that supports, inspires and respects all individuals without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, age, national origin, veteran, disability status or any other basis protected by law. Due to the safety-sensitive nature of this position, strict adherence to KNAPP’s drug-free workplace policy is required. All candidates will be subject to drug-screening in accordance with the policy, and will be expected to remain drug-free during their employment. There will be no exception if recreational or medical use of marijuana is permitted in the location of employment and/or residence or if use of marijuana is only during “off-hours.”

Job DescriptionDescription: We are growing! We are seeking Production Maintenance Technicians on Day-shift; these are all newly created roles for our growing team! Summary The production maintenance technician will be an integral role on the production floor ready to troubleshoot any equipment malfunctions, conducts routine PMs, have foundational knowledge of manufacturing processes and best practices (such as GMPs, PPEs, Safety Protocols, LOTO, etc.) and thrives in a fast-paced work environment. Essential Duties and Responsibilities include the following • Must have entry level diagnosis and troubleshooting skilled as required in a manufacturing plant including:, • Troubleshooting and repairing basic hydraulics (cylinders, motors, solenoids, etc.), • Troubleshooting and repairing pneumatics (air cylinders, electro-pneumatic solenoids, etc.), • Troubleshooting and repairing process fluid transmission (manual valves, electrical valves, pneumatic valves, check valves, basic piping configuration), • Troubleshooting, repairing, and calibrating process monitoring (temp, pressure, level, flow) and equipment (gauges, meters, transducers, transmitters), • Must have basic electrical skills (motor replacement, sensor replacement, understanding of PLC, understanding of sensor functions), • Be computer literate (HMI Interface, HMI setup, email, data logging), • Understand machinery timing (stroke, timing position, dwell, cams), • Must be able to read, understand, and follow machine manuals, mechanical drawings, SOP’s, • Must be detail oriented and able to comply with necessary documentation (work orders, parts inventory removal, etc.), • Must have a high sense of drive, initiative, sense of urgency, and pride support to a high volume, high speed manufacturing plant, • Must be able to work well with others in a team-based environment, • Must be able to comply with food and beverage GMP standards, • Must be able to identify and resolve problems in a timely manner: gather and analyze information skillfully: develop alternative solutions; work well in group problem solving situations, • Must maintain a personal inventory of tools necessary to perform the requirements of the position, • Other duties may be assignedRequirements: Competency and Qualification Requirements The individual should process the necessary technical skills to effectively perform the essential duties and adapt to changes made in the work environment the individual should execute the duties while maintaining a professional attitude with encouraging teamwork and an ethical attitude. The individual needs to demonstrate commitment to the safety and quality of the beverage produced. The individual needs to have the willingness to follow direction and problem solve to generate suggestions for improving the work environment. The individual must have a high school diploma or two to three years related experience and/or training; or equivalent combination of education and experience. Mechatronics or other engineering degree preferred Work Environment and Physical Demands While performing the duties of this job, the employee is frequently exposed to work in wet, humid, and outdoor conditions. The employee is also exposed to varying temperature extremes, including heat and cold. The employee is occasionally exposed to work on elevated platforms, with fumes or airborne particles, or with toxic or caustic chemicals. The employee will regularly lift and/or move 50lbs and occasionally lift and/or move up to 100lbs. While performing the duties of this job, the employee is regularly required to stand, walk, have dexterity of hands, reach with hands and arms, and communicate. The employee is occasionally required to sit, climb, balance, kneel, crouch and crawl. Conditions of Employment Must be able to pass a background check, drug screening, and authorized to work in the US. What We Offer: Benefits include: medical, dental, vision, life insurance, as well as FSA options. 401k with employer matching, PTO, free lunch on weekdays and growth opportunities. BuzzBallz is a woman-owned alcohol brand founded by Merrilee Kick in 2009 and is in Carrollton, Texas. BuzzBallz produces a wide variety of ready to drink cocktails. For more information, please visit our website: .

Job Description Weekend/Floater: Scheduled to work Friday, Saturday & Sunday plus one additional day - Four 10-Hour Shifts. The Maintenance Technician II performs skilled maintenance and repair of complex mechanical, electrical, HVAC, and other physical structures. Maintains, troubleshoots, and repairs facilities mechanical components and electrical systems in accordance with SOPs (standard operating procedures), internal requirements, manufacturer's specifications, and safety policies. Develops, maintains, and secures a spare parts inventory of basic maintenance hand and power tools. Recommends purchase of maintenance tools, equipment and supplies as required. Assists Maintenance Lead in developing methods and procedures to improve facility efficiency and workflow. Oversee and review the work of lower-level technicians. ACCOUNTABILITIES • Locate, identify, and resolve any safety issues with mechanical or electrical devices, • Proactively investigate needs, evaluate issues, and present/recommend alternatives to decrease overall facility operational downtime thus increasing operational effectiveness., • Develop and maintain purchasing/inventory controls for repair parts and tool inventories., • Support existing and future projects during installations, start-up, and long-term operation., • Support daily/weekly asset usage, • Assist in daily/weekly training warehouse personnel, • Assist with special projects as directed by management, • Continuously seeking to improve upon existing methods of operation, by research and development., • 3-5 years of experience in general maintenance machine operations, facility maintenance, and maintenance for high volume conveying systems, etc., • 3 years of experience in PLC and advanced electrical operational maintenance/repair, • Experience in/around: high volume conveying operations, water systems, large volume washers, motors, electrical, PLC controls, • Previous experience with the following: welding, pipe installation/ repair, and heating/ boiler units., • 3-5 years of experience in general maintenance machine operations, facility maintenance, and maintenance for high volume conveying systems, etc., • 3 years of experience in PLC and advanced electrical operational maintenance/repair, • Experience in/around: high volume conveying operations, water systems, large volume washers, motors, electrical, PLC controls, • Previous experience with the following: welding, pipe installation/ repair, and heating/ boiler units., • Previous experience with general facility maintenance functions including doors, office, forklifts, etc.

Job Description The Plant Maintenance II will repair and maintain machinery and mechanical equipment such as engines, motors, pneumatic tools, conveyor systems, Allen Bradley electronics, and various production machines/equipment. Responsibilities: • Assist in and able to diagnose, repair, and maintain production lines and associated assigned systems., • Perform scheduled maintenance on assigned equipment., • Diagnose and repair mechanical and electrical circuitry malfunctions., • Basic knowledge of Arc welding and/or Heliarc welding., • Basic knowledge of PLC diagnoses and repair., • Basic knowledge of hydraulic and pneumatic systems including valves and pumps., • Shall be responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring., • Basic knowledge to read diagrams, blueprints and schematics., • Performs minor repairs to building and equipment., • Performs minor plumbing repairs (ex: lavatory repair)., • Performs minor electrical repairs (ex: light fixture and ballast replacement)., • Completes required checklists and records for building maintenance., • May obtain estimates for supplies, and repair parts; orders parts as needed., • May assist with preventative maintenance on all equipment as needed., • Learn and adhere to safety and security policies and procedures, including wearing appropriate PPE at all times., • Maintain a clean, sanitary, and safe work area., • Responsible for adhering to food safety and quality system requirements by committing to meet all pertinent regulatory, customer, and SQF requirements., • Must follow company GMP’s, SOP’s, and SSOP’s at all times. Qualifications and Experience: • English is the primary language skill; however, bilingual skills may be beneficial based on business necessity., • Ability to climb ladders and to work with chemicals and cleaning products., • Mechanics provide basic mechanical tools required to perform duties and responsibilities., • High degree of accuracy and attention to detail; Ability to work with confidential information in a professional manner., • Ability to read, write and perform basic mathematical calculations required., • Must be willing to work weekends, holidays, and varying shifts, as required., • Must be able to work independently and/or on a team in a fast-paced manufacturing environment., • Minimum age: 18, • Must be able to pass a drug screen and physical. Certificates/Licenses/Registrations: • PLC, HVAC, Ammonia, Refrigeration, or other specialty certifications preferred but not required., • One-year certificate from college or technical school; or three-years related experience and/or training in manufacturing equipment maintenance and repair; or an equivalent combination of continued education and experience., • Material Handling Equipment (MHE). Physical Demand/Working Conditions: • Must be able to frequently stand, walk, kneel, reach, climb, pull, and bend with a full range of body motion., • Must be able to routinely lift and/or move up to 50 pounds and occasionally lift and/or move more than 75 pounds., • Must be able to work in an office environment, extended periods in a cold, damp and hot environment., • Must be able to work in variable weather conditions. Schedule: 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off Compensation: $29.90 per hour Benefits: Medical, Dental, Vision insurance & Retirement plan Hiland Dairy Foods Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off

Job Description Maintenance Technician II - Night Shift (7PM-7AM) $34.25/hr. + $1.00 Shift Differential Who we are looking for: We are currently searching for a Maintenance Technician to be based out of Dallas, TX. Reporting to the Maintenance Manager this person’s primary focus will be to maintain production and quality by ensuring operation of machinery and mechanical equipment. The ideal candidate will have a high school diploma or equivalent and 3 years of experience doing electrical/mechanical maintenance in an industrial/manufacturing environment. Prior success as a Maintenance Technician or equivalent position and experience in lean manufacturing is a plus. What you'll do: • Follow diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to troubleshooting malfunctions., • Fabricate repair parts by using machine shop tools and equipment., • Test, locate, and repair trouble in electrical circuits and equipment; perform electronic equipment repair and troubleshooting; repair and replace broken or defective parts; repair electrical motors, parts, wiring and other electrical devices., • Use knowledge of principles, methods and equipment in the installation, maintenance and repair of electrical systems and electronic equipment., • Control downtime by informing production workers of routine preventive maintenance requirements., • Preferred educational requirement is High School diploma or equivalent, • Strong mechanical aptitude, • 3-5 years of experience doing electrical/mechanical maintenance in an industrial/manufacturing environment, • PLC troubleshooting experience, • Complete any required training., • Have developed relationships within the department., • Be well-versed in Maintenance strategic priorities and the importance of your role to daily operations., • Works as a positive team member that helps lift others to a higher level. Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $34.25 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis. Join our team and align yourself with an industry leader!

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Level C Industrial Maintenance Technician Job Type: Full-time Pay: $26.00 - $28.00 per hour Job Purpose The Level C Maintenance Technician is responsible for the maintenance, troubleshooting, and repair of packaging and warehouse equipment at Quality Packaging. This includes horizontal form-fill-seal machines, shrink wrap tunnels, forklifts, stretch wrappers, and registered bundle wrappers, as well as handling general building and electrical maintenance. The role requires hands-on technical expertise, timely response to maintenance issues, and effective communication across various channels (phone, email, and in person). Key Responsibilities and Essential Duties • Perform routine preventative maintenance on mechanical handling equipment (e.g., forklifts, pallet jacks, sweepers)., • Diagnose and repair equipment malfunctions involving mechanical, electrical, pneumatic, and hydraulic systems., • Maintain and repair batteries and chargers., • Conduct minor welding, brazing, soldering, and fabrication tasks as required., • Address mechanical damage to warehouse infrastructure, including racking, flooring, and piping., • Interpret equipment manuals, blueprints, and work orders to perform scheduled maintenance and service tasks., • Maintain accurate records of inspections, repairs, and preventive maintenance tasks., • Operate mechanical hand tools and measurement instruments (tape measures, micrometers, etc.)., • Support production efficiency by ensuring minimal downtime through prompt maintenance actions. Technical Requirements • Strong mechanical aptitude and electrical troubleshooting skills., • Ability to work with high-voltage systems, including 480V 3-phase motors., • Multi-disciplinary repair experience (mechanical, electrical, pneumatic, hydraulic)., • Familiarity with Variable Frequency Drives (VFDs), Servo motors and drives, encoders, and equipment timing., • Basic understanding of PLC systems, sensors (photo eyes, proximity sensors), and logic software., • Customer Service Orientation: Ability to communicate effectively with team members at all levels., • Flexibility: Ability to shift priorities and remain calm under pressure in a fast-paced environment., • Self-Motivation: Capable of working independently and taking initiative in troubleshooting and maintenance tasks., • High School Diploma or GED required; technical certifications or trade school training preferred., • Minimum of 5 years’ relevant hands-on maintenance experience in a production or packaging environment., • Some college coursework is desirable. Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Job DescriptionBenefits: • Dental insurance, • Health insurance Summary The Maintenance Technician will be able to provide technical solutions to automation-related tasks including troubleshooting, determining root case, implementation of fix and documentation of solutions. Responsible for designing SOPs, installing, maintaining and troubleshooting automation equipment including logic controllers and HMI devices used in production equipment. Must have a broad range of knowledge and understanding of process machinery, electrical controls, as well as mechanical, pneumatic and hydraulic systems essential to plant and production related equipment. Assists in the procurement of parts and planning of repairs Leads complex projects, preventive maintenance activities and repairs across the facility Able to operate CMMS systems and demonstrate 100% functionality in order to complete work orders as well as log corrective maintenance issues in the system Effectively communicate with internal and/or external Technical Support, production personnel and other techs to identify problematic areas of concern, advance circuits and grounding, interpret diagrams, and test equipment Perform electrical repairs and troubleshoot for the following: PLC controls, AC&DC motor controls, solid state motor controls, advance circuits and grounds, interpret diagrams, and test equipment Read schematics, drawings and manuals to establish facts and draw valid conclusions Must demonstrate an understanding of the companys objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals Oversee or perform daily inspections, emergency repairs, routine adjustments and follow periodic preventive maintenance schedule Maintain organized documentation and inspection records; be prepared for a facility audit of such records and related processes Model professional workplace conduct and adherence to company policies such as the GMP compliance, attendance, punctuality, efficient and productive work habits and good personal hygiene Provide support to Process Improvement (PI) projects and participate on safety teams Must possess proficient mechanical, electrical, hydraulic and pneumatic troubleshooting skills (logic and control circuits) and emergency repair skills; ability to identify and repair problematic issues concerning all equipment and machinery, including finding innovative solutions to recurrent problems Ability to use multimeter and other measurable instruments Knowledge of National Electrical Code Ability to work with single and three phase voltage Must be capable of reading/mechanical blueprints Capable of troubleshooting and making the repairs on AB PLCs (programmable logic controllers) Ability to understand schematics, drawings, and manuals to establish facts and draw conclusions Ability to demonstrate math skills as part of the daily activities such as fractions, decimals, percentages and the metric system; efficient with ratios, metric system and formulas Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. Must follow all Company Safety policies, as well as all GMP and FSQA regulations and all lock-out/tag-out requirements according to OSHA requirements. Food Processing Industry experience, but not a must NECESSARY 3 years Industrial Controls experience High School Diploma or GED equivalency Experience in a manufacturing environment required Certificate in trade school or equivalent work experience related to a specific trade or general facilities and/or maintenance background Must be able to take direction as well as ownership of given tasks Working knowledge of Microsoft Office, Gmail, Basic Excel ABILITIES Ability to prioritize and manage multi-functional tasks Ability to work effectively under pressure, and against strict time constraints Ability to use standard powered and non-powered tools Ability to accurately assess mechanical and electrical problems, make recommendations, communicate effectively and resolve issues quickly Must be able to walk, bend, stand and reach for extended periods of time Must be able to lift 49 lbs.

Job DescriptionJob Description Join us at the Atrium Windows Maintenance Career Fair on Saturday, October 11th, 2025, at 9001 Ambassador Row, Dallas, TX 75247, for on-the-spot interviews and exciting career opportunities from 10:00 AM – 1:00 PM (bring a translator if needed). JOB DETAILS Base Starting Wage $29.50-$34.50 plus $1 per hour shift differential 2nd Shift: (3:00 PM - 1:00 AM) M-F. Duties and Responsibilities Maintenance Technician III is an Electro-Mechanical position and responsibilities will include but not be limited to supporting manufacturing operations, adjusting and repairing equipment as needed, tracking usage of and ordering replacement parts. • Diagnose and repair complex electro-mechanical problems with manufacturing equipment, • Perform detailed setup on equipment including recipe changes and control adjustments, • Repair and keep mechanical machine components in top operating condition, • Advanced understanding of electrical principles such as voltage, current and resistance, • Diagnose and repair electrical control circuits, field devices, sensors, photo eyes, etc., • Advanced understanding of electrical safety and motor control circuits and programmable drives, • Troubleshoot the inputs and outputs on PLC and repair issues, • Complete projects to add electrical circuits and controls, new equipment and relocate machines, • Maintain and repair pneumatic systems including repairs of cylinders and other components, • Perform simple to complex mechanical Preventative Maintenance Tasks following instructions, • Enter all work completed in computer-based maintenance program, • Monitor and report spare parts usage including completing parts order forms, • Adjust equipment based on Statistical Process Control data and team with QA, • Train Level I and II technicians in more complex tasks and skills, • Performs other duties as assignedQualifications, • Associates degree in related field, or equivalent related experience, • 3-7 years’ maintenance experience in a manufacturing environment, • Knowledge of and experience with Lock-Out, Tag-Out procedures, • Able to strictly adhere to safety policies/procedures and be committed to customer quality., • Must be available for regular standby assignments; work scheduled off-hours and emergency overtime as required., • Proficient in Word and Excel, • Must be willing to attend training sessions as needed, including out of state locations, • Ability to assist in Training Level I and II Technicians, • Intermediate knowledge of fabrication (ex. welding, basic machining), • Possess strong work ethic and knowledge of intermediate troubleshooting, • Able to read printed materials, blueprints, schematics, and computer graphics, • Excellent verbal and written communication skills, • Ability to work independently and within a team, including the ability to establish and maintain cooperative working relationships employees, vendors, contractors, and suppliers, • Ability to show attention to detail in a very fast paced environment Additional Information Location: 9001 Ambassador Row Dallas, TX 75247 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description The Plant Maintenance III installs, maintains, and repairs production and manufacturing equipment. Perform Proficient preventative maintenance inspection and service on all production and manufacturing equipment in accordance with manufacturer specifications and company guidelines. Responsibilities: • Troubleshoot, diagnose, repair, and maintain equipment to the desired company performance standards., • Interface, troubleshoot, diagnose, and repair electronic computerized systems and equipment, • Utilizing a continuous improvement mindset, assist in identifying opportunities to improve processes., • Comply with all company work and safety rules and regulatory compliance rules and regulations., • Use all personal protective equipment in compliance with OSHA regulations., • Possess the necessary personal tools to perform duties. Qualifications and Experience: • Moderate knowledge of and/or experience with PLC., • Must have proven experience and ability to display expertise in one or more of the following:, • Proficient experience with compressors/ammonia systems (e.g., refrigeration systems)., • Proficient experience with PLC (e.g., industrial maintenance, computer control systems, etc.)., • Proficient experience with basic electrical systems (e.g., starters, fuses, contacts, relays)., • Proficient experience with conveyors (air cylinders, diverters, sensors, motor/speed controls)., • Proficient experience with electrical systems (installation, frequency drive, troubleshooting), • Proficient experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.)., • Proficient experience with gearing and gear boxes (rebuilds, ordering parts, machining parts)., • Proficient experience with hydraulic systems (high-pressure cylinders, pumps, valves, troubleshooting)., • Proficient experience with kinematics (e.g., line speed/sprocket size ratios, etc.)., • Review rating instructions., • Proficient experience with packaging/high-speed production (e.g., bottling, consumer products, etc.)., • Proficient experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting)., • Proficient experience with pneumatics/air compression (e.g., valves, cylinders, etc.)., • Proficient experience with preventative maintenance (computerized preventative charts/data)., • Proficient experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs)., • Ability to read, write, perform basic mathematical calculations, and accurately record data required., • Must be willing to work overtime, weekends, holidays, and varying shifts, as required., • Must be able to work independently and/or on a team in a fast-paced environment., • Strong analytical skills and a systematic approach to troubleshooting and problem-solving is required., • Must pass pre-employment testing and physical evaluation and be at least 18 years of age. Certificates/Licenses/Registrations: • PLC, HVAC, Ammonia, Refrigeration, or other specialty certifications required, • One year certificate from college or technical school; or five years related experience and/or training in manufacturing equipment maintenance and repair; or equivalent combination of continued education and experience., • Material Handling Equipment (MHE). Physical Demand/Working Conditions: • Must be able to frequently stand, walk, kneel, reach, climb, pull, and bend with a full range of body motion., • Must be able to routinely lift and/or move up to 50 pounds and occasionally lift and/or move more than 75 pounds., • Must be able to work in an office environment, extended periods in a cold, damp and hot environment., • Must be able to work in variable weather conditions. Schedule: 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off Compensation: $34.24 per hour Benefits: Medical, Dental, Vision insurance & Retirement plan Hiland Dairy Foods Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off

Job Description Capital Machine & Modern Machinery Company are seeking a highly skilled and dedicated Preventative Maintenance Mechanic to join our field service team full-time in Dallas, TX. As a Preventative Maintenance Mechanic, you will be responsible for performing scheduled preventive maintenance on a variety of industrial machinery and equipment located at our customers' facilities. The Preventative Maintenance Mechanic role is crucial in ensuring the optimal performance, longevity, and safety of our customers' machines, minimizing downtime, and maximizing their operational efficiency. Capital Machine and Modern Machinery Company are leading providers of industrial machinery and equipment, dedicated to offering our customers reliable solutions and exceptional service. We pride ourselves on our commitment to quality, innovation, and customer satisfaction. Key Responsibilities: • Execute comprehensive preventative maintenance (PM) schedules on various types of industrial machinery, including but not limited to Accurpress, Safan Darley, HydMech, Marvel, Geka, Euromac, Omax and Peddinghaus machines., • Conduct thorough inspections, diagnostic checks, and performance evaluations of machines to identify potential issues before they lead to breakdowns., • Perform routine tasks such as lubrication, filter changes, belt adjustments, fluid level checks, and general cleaning of machine components., • Inspect and test safety devices and interlocks to ensure proper functionality., • Document all maintenance activities accurately and completely, including parts used, hours worked, and observations made, utilizing CRM and/or CMMS software., • Communicate effectively with customers regarding maintenance procedures, machine status, and any recommendations for repairs or upgrades., • Identify and report minor mechanical, electrical, and hydraulic issues during PM visits and advise on necessary corrective actions., • Adhere to all safety protocols and company policies while on customer sites., • Maintain a clean, organized, and safe work environment., • Manage and maintain company-provided tools and equipment., • Participate in ongoing training and professional development opportunities, • Travel regularly to customer sites, often within a designated service territory. Job Qualifications: • High school diploma or equivalent; associate degree or technical certification in industrial maintenance, mechanical engineering, or a related field is preferred., • Proven experience (minimum 3-5 years) as a preventative maintenance mechanic, industrial mechanic, or similar role, preferably in a field service environment., • Strong mechanical aptitude and in-depth knowledge of industrial machinery components and systems (mechanical, electrical, hydraulic, pneumatic)., • Ability to read and interpret technical manuals, schematics, and blueprints., • Proficiency in using a variety of hand and power tools, as well as diagnostic equipment., • Excellent problem-solving and troubleshooting skills., • Strong attention to detail and a commitment to quality workmanship., • Exceptional communication and interpersonal skills, with the ability to interact professionally with customers and colleagues., • Ability to work independently with minimal supervision and manage time effectively., • Must possess a valid driver's license and a clean driving record., • Ability to lift heavy objects, stand, bend, stoop, and climb for extended periods., • Willingness to travel extensively within the assigned service area. Preferred Skills: • Experience with specific machinery lines sold by Modern Machinery Company & Capital Machine (e.g., Accurpress, Safan Darley, HydMech, Marvel, Geka, Euromac, Timesavers) or any other metal fabrication machines. (?), • Familiarity with Computerized Maintenance Management Systems (CMMS/CRM). Capital Machine and Modern Machinery Company have partnered with Hueman for their recruitment needs. If you are interested in learning more about a career with Capital Machine and Modern Machinery Company as a Preventative Maintenance Mechanic, apply today! #INDPE2023

Job Description The Plant Maintenance I performs basic installations, maintains, and repairs production and manufacturing equipment. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Responsibilities: • Perform BASIC preventative maintenance inspection and service on all production and manufacturing equipment in accordance with manufacturer specifications and company guidelines., • Perform BASIC troubleshooting, diagnosis, repair, and maintain equipment to the desired company performance standards., • Interface, troubleshoot, diagnose, and repair electronic computerized systems and equipment, • Utilizing a continuous improvement mindset and assisting in identifying opportunities to improve processes., • Comply with all company work and safety rules and regulatory compliance rules and regulations., • Use all personal protective equipment in compliance with OSHA regulations., • Possess the necessary personal tools to perform duties. Qualifications and Experience: • English is the primary language skill; however, bilingual skills may be beneficial based on business necessity., • Ability to read, write, perform basic mathematical calculations, and accurately record data required., • Must be willing to work overtime, weekends, holidays, and varying shifts, as required., • Must be able to work independently and/or on a team in a fast-paced environment., • Strong analytical skills and a systematic approach to troubleshooting and problem-solving are required., • Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)., • Experience with conveyors (air cylinders, diverters, sensors, motor/speed controls)., • Experience with electrical systems (installation, frequency drive, troubleshooting), • Experience with electronics (e.g., level probes, flow meters, drives/VFDs, etc.)., • Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts)., • Experience with hydraulic-high pressure cylinders, pumps, valves, and troubleshooting)., • Experience with kinematics (e.g., line speed/sprocket size ratios, etc.)., • Review rating instructions., • Experience with high-speed production (e.g., bottling, consumer products, etc.)., • Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting)., • Experience with pneumatics/air compression (e.g., valves, cylinders, etc.)., • Experience with preventative maintenance (computerized preventative charts/data)., • Experience with pumps (e.g., troubleshooting, replacing seals/motors, understanding specs). Certificates/Licenses/Registrations: • PLC, HVAC, Ammonia, Refrigeration, or other specialty certifications preferred but not required., • One year certificate from college or technical school; or one-year related experience and/or training in manufacturing equipment maintenance and repair; or an equivalent combination of continued education and experience., • Material Handling Equipment (MHE). Physical Demand/Working Conditions: • Must be able to frequently stand, walk, kneel, reach, climb, pull, and bend with a full range of body motion., • Must be able to routinely lift and/or move up to 50 pounds and occasionally lift and/or move more than 75 pounds., • Must be able to work in an office environment, extended periods in a cold, damp and hot environment., • Must be able to work in variable weather conditions. Schedule: 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off Compensation: $28.02 per hour Benefits: Medical, Dental, Vision insurance & Retirement plan Hiland Dairy Foods Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. 3 days 6:00AM - 6:00PM 4th day: 4-hour shift with Over Time available 3 days off

Job Description Job Description: Job Description Primary Responsibility : Under minimal supervision, work independently, performing advanced refrigeration maintenance and repair throughout the warehouse. Provide maintenance support as necessary to ensure operational objectives are met. Other areas of knowledge, including but not exclusive to: mechanical, electrical, hydraulic, pneumatic, PLC, fabrication and welding, ammonia, and plumbing. Will direct and oversee the work of contractors on occasion. What You'll Do : Defines and sets up ideal operational settings and parameters for all refrigeration equipment (i.e. superheat, regulators, pressure settings, defrost cycles, etc.) Proactively monitor system performance, and take appropriate actions to ensure that the system is operating optimally. Pumps out/evacuates refrigerant as necessary for component level replacement and/or repair. Provides in depth troubleshooting of refrigeration, electrical, mechanical, and controls systems to root cause and recommends corrective action Performs calibrations (slide valve, potentiometers, RTDs, pressure transducers, etc.) Replaces components within the refrigeration's system, with safe LOTO procedures and in accordance with PSM program. What Experience and Education You Need : High school diploma or general education degree (GED) required. 5 years Industrial Refrigeration maintenance experience, which must include ammonia refrigeration. Completion of RETA Operator 1 & 2 courses preferred. In lieu of RETA course - successful completion of industry recognized Industrial Ammonia Refrigeration training (Stellar, Frick, GCAP/Lanier or employer comparable training program), equivalent in scope will be considered. RETA CIRO certification preferred. Troubleshooting and repairs with differing control systems ALTA/Allen Bradley etc. Required to be trained in HAZMAT, obtain and maintain the certification. What Could Set You Apart : Fully competent in mechanical knowledge (all level 3 requirements). Requires strong communication and interpersonal skills. Must be able to work unsupervised. Proficient use of testing equipment. Must be able to work flexible shifts, if required, including on call. Physical Requirements : The physical demands described below are representative of those that must be met to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. May be required to tolerate working environment with inside controlled temperatures of -20 degrees Fahrenheit and outside ambient temperatures (including heat, cold and precipitation). Must be able to work at heights in excess of 35 ft. and be able to access elevated platforms and catwalks Must be able to climb ladders and stairs. Frequently required to stand; walk; push; pull; reach with hands and arms; stoop; kneel; and crouch Must frequently lift and/or move up to 50 pounds. Must be able to use hand and power tools. Specific vision abilities required by this job include close vision, distance vision, color vision and depth perception. Either naturally or with the aid of eye glasses (use of contacts are prohibited when working with ammonia). Able to work nights and weekends. Able to pass a physical and respiratory exam. Work Environment : The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. $ 30.00/hr LI23 LILive24

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Ecolab is seeking an Electrical Controls Technician to join our team in Garland, TX. As a Controls Technician, you will be an integral part of the plant Maintenance team that maintains, repairs, and troubleshoots automated production equipment. • Provide daily operational support for control systems across the facility, • Troubleshoot and repair PLCs, HMIs, VFDs, sensors, and other automation components, • Support S.C.A.D.A engineering (AVEVA), • Collaborate with maintenance and engineering teams to resolve equipment issues quickly and effectively, • Participate in control system upgrades, process improvement initiatives, and capital projects, • Support installation and commissioning of new equipment and system upgrades, • Perform preventive maintenance and document all work performed, • Interpret electrical schematics, wiring diagrams, and technical documentation, • Ensure compliance with Ecolab’s safety, quality, and regulatory standards. Position Details: * Plant Location: Garland, TX * Work Week & Shift: 2nd or 3rd shift, Monday - Friday * Some flexibility is available with regards to working hours during 2nd (2pm - 10PM) or 3rd shift (10pm-6am) * Compensation: starting at $40 per hour depending on experience • High School Diploma or equivalent, • 5 years of experience in controls or automation in a manufacturing or industrial setting, • 2 years of experience with PLC programming, HMI interfaces, and industrial networks, • Understanding of electrical systems and instrumentation, • Ability to work independently and collaboratively in a fast-paced environment, • Ability to read and interpret instructions and schematics in English, • No immigration sponsorship available for this role, • Ability to lift and carry up to 50 lbs, • Work in an industrial environment with exposure to varying temperatures, noise, and chemical processes, • Comfortable working at heights, in confined spaces, and on elevated platforms, • Must follow all safety protocols and wear appropriate PPE, • Associate of Applied Science (AAS) in Electrical Technology, Industrial Automation, or Instrumentation & Control Technology, • Experience in chemical, food, or pharmaceutical manufacturing environments, • Experience with Rockwall Automation, • Experience with SCADA systems and industrial communication protocols (Ethernet/IP, Modbus), • Familiarity with NFPA 70E and NEC standards, • Strong troubleshooting and analytical skills, • Solid track record of VFDs motor control, • Solid track record of troubleshooting instrumentation, • Solid knowledge of safety circuits both hardware and software, • Experience with AutoCAD Electrical or similar design tools, • Familiarity with SAP and CMMS systems, • Excellent troubleshooting, communication, and project management skills What’s in it For You: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range: The pay rate for this role starts at $40.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. ___ for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at ___. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job DescriptionCompany Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a business with an almost 170-year history of innovation, and five global divisions, all experts in their field. We believe that different perspectives and backgrounds are what make a company flourish and are proud to be a company with values grounded in integrity, respect, ownership, customer focus, and passion. Job Description As a Service Logistics Coordinator, you will be responsible for a variety of logistics and material handling tasks, including shipping and receiving, scrap removal, recycling, tracking and delivering parts, scheduling pickups, and completing shipping documentation. You will verify incoming shipments against packing slips and confirm orders in ServiceMax. A key part of this role involves supporting your team by actively sharing information and assisting peers when needed. Job duties to include but are not limited to; • Maintain clear, professional, and effective communication in both verbal and written forms across all levels of the organization., • Develop and sustain collaborative relationships with the Field Service Team and Logistics personnel to ensure alignment with customer requirements and timely fulfillment of parts needs., • Implement cost-control measures wherever possible to enhance operational efficiency and support budgetary goals., • Demonstrate flexibility in work schedule, including availability for travel, overtime, and non-standard hours as required by business demands., • Ensure full compliance with company health, safety, and environmental policies and procedures at all times., • Adhere strictly to all applicable U.S. export control laws and security regulations., • Perform additional responsibilities and tasks as assigned to support departmental and organizational objectives.Qualifications Education/Training: High School Diploma or GED required; Preferred education Associate’s Degree/Related Trade Certification (Equivalence achieved through comparative work and life experience of 2-3 years is acceptable Experience: 2-3 years' work experience is required for this role directly involved with organizing and accounting for parts and shipments. Technical Knowledge, Skills and Abilities: • Strong communication skills with a focus on customer service and teamwork., • Highly responsive to customer needs; must be available for short-notice travel., • Well-organized with strong interpersonal and communication abilities., • Proficient in ERP systems, including SAP., • Demonstrates excellent customer service skills and ability to handle stressful situations., • Self-motivated, dependable, and accountable., • Professional and effective telephone communication skills., • Physically capable of lifting/carrying up to 50 lbs and pushing/pulling up to 200 lbs., • Must be able to move/ manipulate equipment weighing up to 1000 lbs. with the assistance of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Comfortable working in physically demanding environments requiring bending, twisting, and full body mobility., • Able to follow safety procedures and work in extreme or hazardous conditions (e.g., high temperatures, humidity, noise, confined spaces)., • Skilled in reading and interpreting technical and operational information., • Capable of managing multiple complex tasks and shifting priorities effectively., • Strong time management and ability to meet deadlines., • Continuous improvement mindset with a focus on process efficiency. While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. HIRING SALARY RANGE: $32,996.00 - $76,993.00/yr (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, protected veteran status, disability, or any other legally protected characteristic. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail or call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection participates in the Electronic Employment Verification Program. #SDNA We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Process and Control Automation Engineer will design, develop, and implement automation systems to optimize industrial processes. Configure hardware and software, ensure system efficiency, and troubleshoot issues. Collaborate with teams to integrate new technologies and improve processes. Strong problem-solving skills and automation experience required. Responsibilities: • Develop, design, maintain, and commission automation and control systems for industrial equipment., • Design and program logic for PLCs, drive systems, and combustion control systems., • Develop SCADA and operator interface applications., • Create and maintain databases and custom computer programs for PLC and SCADA system interfaces., • Troubleshoot mechanical and electrical components, diagnose and resolve issues using standard procedures., • Produce project manuals and electrical schematics using CAD software., • Develop scope of work, cost estimates, and budgets for electrical systems., • Gain in-depth knowledge of all aspects of SCR systems, including fluid systems, operations, metallurgy, maintenance, material handling, and furnace systems., • Assist with on-site commissioning of SCR system components., • Transfer technical knowledge to SCR customers through training, discussions, presentations, and startup assistance. Qualifications: • Bachelor’s Degree in Electrical Engineering or a related engineering field., • At least 8 years of experience in the design, commissioning, troubleshooting, and/or operations of PLC process and control systems, particularly for combustion management systems., • At least 5 years’ experience in the chemical or manufacturing industry, with expertise in industrial processing equipment, instrumentation and control, AC and DC drives, PLCs, combustion systems, design, maintenance, and/or operation., • Practical experience working on the floor with technicians; this is a hands-on role involving PLC process and controls, not database processes and controls., • Experience with Allen Bradley or Siemens PLCs and drive systems., • Experience with SCADA systems and HMI applications., • Willingness to travel internationally approximately 40% of the time., • Office or home location based in Carrollton, GA., • Proficiency in AutoCAD for CAD tasks., • Strong computer programming, networking, database, and reporting skills., • Excellent communication, organization, presentation, interpersonal, and project management skills. Benefits: • Dental Insurance, • Medical Insurance, • Vision Insurance, • Life Insurance, • Retirement, • Paid time off and other Travel: Up to 40% of the time Salary: Salary to be discussed with a Recruiter Bonus: Negotiable signing bonus Sponsorship: No visa sponsorships are supported Powered by JazzHR g5zxF0kD5D

Job Description Control Panels USA is seeking an experienced Automation Programmer (HMI/PLC/SCADA) to join our growing team. The Automation Programmer position is responsible for completing all programming, configuration and communication services using equipment and software from a variety of HMI, SCADA, and PLC manufacturers, as well as various communication protocols for a wide variety of industries and applications such as water, wastewater, oil and gas, pharmaceutical, food & beverage, process control, machine control, conveyor controls, etc. This role is located in our Georgetown, Tx office. Who we are: Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of industries. We offer custom design and fabrication for OEM clients, contractors, and end users requiring either large or small production runs. Our factory in Austin, Texas houses state-of-the-art engineering, manufacturing, and testing capabilities. This allows us to supply our customers with cost-effective solutions while maintaining very competitive lead times. We strive to exceed our customers’ expectations while providing the highest quality products and services to our clients in the most cost-efficient manner. Why CP USA? Join our amazing team! Here’s what some of our employees have to say about CP USA: • Have always enjoyed working for CP USA. This is truly the best working environment I’ve ever worked in., • CP USA does an amazing job of making their employees feel appreciated. They also do great at recognizing strengths and giving people the opportunity to grow., • This is a great company to work for and the employee longevity shows it.CP USA provides:, • 100% employer-paid medical, dental, and vision insurance for our employees., • 401(k) with limited 50% matching, • Paid time off, • Reward & Recognition Bonus Program, • Quarterly company events, • And More!Experienced Automation Programmer’s pay will be dependent on applicable experience. Our regular work schedule is M-F 8AM-4:30PM. Responsibilities include: • PLC configuration and programming services from completely new installations to maintenance & improvement Projects of existing systems. PLC familiarity with various platforms such as Allen-Bradley, Schneider Electric, Siemens, GE PAC Systems, SCADAPack, etc., • SCADA programming services on platforms such as AVEVA/Wonderware InTouch, Trihedral VTSCADA, Rockwell Software FT View SE, Iinductive Automation Ignition, Schneider Electric ClearSCADA, GE iFix., • HMI Programming services for various manufacturers such as Allen-Bradley PanelView Plus, Maple Systems, Schneider Electric Magellis, AVG, and many others., • Perform Factory Acceptance Testing with clients and engineers., • Perform site commissioning services which includes field I/O verification and system communications., • Ensure client expectations are met., • Maintain good relations with clients and vendor., • Be familiar with and able to understand and develop the following drawing packages:, • Electrical Schematics, • Panel Layout Drawings, • Communication Drawings, • Loop Drawings, • Or other drawings as applicable, • Basic understanding of process control networks over ethernet TCP/IP, RS-232 and RS-485., • Knowledgeable in multiple hardware protocols i.e. EtherIP, DF1, Modbus RTU, Modbus TCP., • Basic knowledge of typical spread spectrum radio configuration and communication., • Create Control Narratives and Function Strategies for use in Submittals and O&M Manuals., • Create support documentation for Project completion and verification process. This may include, but not be limited to:, • Documented software applications., • I/O List., • Test Reports for O&M Manuals.Desired Skills & Experience:, • Must have experience with automation controller systems such as Allen Bradley including PlantPAX, Siemens, Schneider Electric (Modicon) & GE PLC systems., • Must have experience with various HMI and SCADA systems such as AVEVA/Wonderware, FactoryTalk View ME/SE, and Inductive Automation Ignition as a plus., • Field experience performing panel checkout & loop checks required., • Must perform troubleshooting, startup, and commissioning services., • Project management experience required on projects that are exclusive to programming-only scopes., • Effective client communication skills is required. Other Requirements: • Valid driver license., • Successful completion MVR check., • Successful completion of background check.Industry:, • Industrial automation., • Municipal utilities. Powered by JazzHR 5sAlEqTts9

Job DescriptionField Service Engineer Field Service Engineer Dallas, TX (20% - 25% Travel) $70K - $100K + Overtime Pay Position Overview Aerospace equipment manufacturer looking to hire a Field Service Technician! The Field Service Technician will be part of the post-sales team and is responsible for the installation, maintenance, and repair of our machinery and associated control systems at our client locations. The ideal candidate will have a strong technical background and the ability to troubleshoot complex mechanical and electrical issues in a field environment. Our machinery is very niche, but the core technical skills required is 5-axis CNC machining with FANUC controls. Key Responsibilities • Execute programming tasks to implement solutions, perform calibrations, and carry out adjustment procedures., • Diagnose and resolve technical issues encountered during equipment commissioning and throughout the time period our clients use our equipment, • Troubleshoot and resolve technical issues related to Siemens and Fanuc controls., • Provide training and support to customers on the operation of their machinery., • Document service activities and maintain accurate records of repairs and maintenance performed., • 5+ years of experience installing, troubleshooting, calibrating, and/or programming 5-Axis CNC machines, • Experience with Fanuc control system, • Experience with Siemens AND Fanuc control systems preferred, • Experience with PLC programming and troubleshooting., • Ability to read and interpret technical drawings and manuals., • Excellent problem-solving skills and attention to detail. Benefits • Vacation/PTO, • Medical, • Dental, • Vision, • 401k, • Gas/mileage reimbursement, • All out of state travel paid for • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/24/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Who We Are: At Formic, we're on a mission to revolutionize American manufacturing and create more abundance in the world. We believe in continuing the American legacy of innovation by making automation accessible to all manufacturers and increasing their factory productivity by 10x. Built upon deep expertise in robotics and manufacturing, our unique full service automation solutions combine the best automation technology, software, and analysis tools for manufacturers with best in class uptime, support, and maintenance services. We are creating a new era of supercharged efficiency and competitiveness for US manufacturers.As the world faces growing pressure from tariffs, rising costs, and labor shortages, Formic is uniquely positioned as the industry leading solution to overcome these challenges. Fueled by our vision for a re-industrialized domestic supply chain, everything we do is aimed at growing "Made in America" products. And we're growing fast - achieving 7x growth in production hours YoY. Supporting us in our mission, with investments thus far totaling over $60 million, are backers including Lux Capital, Initialized Capital, Blackhorn Ventures, Mitsubishi HC Capital NA, and CEOs and founders of multiple Fortune 50 companies. The Production Optimization Team is dedicated to ensuring both customer satisfaction and the seamless operation of our robots. Composed of Customer Success and Monitoring & Maintenance teams, this department works to maximize robot performance and provide ongoing support to guarantee a smooth and efficient user experience for our customers. Sustaining Engineers work on the forefront of robotic automation using Formic's suite of monitoring and diagnostic capabilities to guide preventative, corrective, and predictive maintenance activities across our growing fleet of deployed robotic cells. They work with a variety of robotic equipment and OEM's, delivering innovative and value-add automation to our manufacturing sector customers. As a Senior Automation Sustaining Engineer you will be responsible for maintaining, improving, and ensuring the continuous operation of manufacturing automation systems and equipment. This role involves working closely with production teams, quality assurance, and engineering personnel to troubleshoot issues, implement improvements, and ensure that equipment meets performance standards. In this role you will: • Diagnose and remedy automation failures to minimize downtime, • Design and deploy preventative strategies that boost system uptime and reliability, • Drive continuous-improvement projects: scope, plan, and deliver hardware/software upgrades, • Analyze production data and field diagnostics to uncover performance-optimization opportunities, • Provide remote support for customer needs in the field: responding to calls and support tickets; diagnosing issues; guiding customers through solutions remotely; and triaging to onsite team members when needed, • Partner with Product, Deployment, and Engineering teams to standardize and streamline equipment setups, • Own equipment documentation: operating procedures, maintenance logs, and change-control records, • Mentor and train other technicians and engineers on best practices for system health and troubleshooting, • Enforce compliance with safety standards, industry regulations, and internal quality guidelines, • Serve as the go-to technical authority for complex escalations and cross-functional initiatives, • Cultivate vendor relationships to ensure robust support, parts availability, and advanced diagnostics, • Minimum of 10+ years of experience in manufacturing automation engineering, • Proficiency in automation technologies, including PLC (Programmable Logic Controller) programming and HMI (Human-Machine Interface)., • Solid foundation in control theory, robotics, and automated manufacturing systems, • Knowledge of PLCs, automation, and control systems, • Familiarity with industrial standards and regulations related to manufacturing automation, • Strong technical skills in diagnosing and repairing mechanical, electrical, and electronic systems, • Proficiency in CAD software and ability to read technical drawings, • Excellent problem-solving skills and attention to detail, • Strong project management and organizational skills, • Strong communication skills for teamwork, troubleshooting, and brainstorming, • The ability to work independently and as part of a team, • The ability to work in a manufacturing environment, which may include exposure to noise, heat, and hazardous materials, • The ability to lift and move equipment and components as needed, • Willingness to travel 50% to manufacturing sites or equipment suppliers (typically 1 week of travel, 1 week not, subject to change due to business needs), • Possession of a current, valid drivers license and access to your own vehicle for local travel Equity in Formic: Own a meaningful stake in a fast-growing Series A startup, backed by leading global investors * Comprehensive Healthcare Coverage: 99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents, provided by Blue Cross Blue Shield and Guardian * Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability through Guardian, all 100% employer-paid * Employee Assistance Program (EAP): Fully funded by Formic and provided via Guardian, offering support when you need it most * Paid Parental Leave: Generous parental leave to support our employees and their growing families * Company-sponsored 401(k): Invest in your future with our company-backed retirement savings plan * Home Office Stipend: A one-time allowance for fully remote employees to set up your ideal at-home or on the road work environment * Monthly Cell-Phone Reimbursement: Monthly stipend toward phone and internet expenses * Flexible Time-Off: Take the time you need, when you need it, supported by our flexible PTO policy * Paid Company Holidays: Celebrate important dates with paid time off Compensation Philosophy Formic's compensation packages - including salaries and equity - are thoughtfully benchmarked against peer companies at a similar growth stage. Equity represents a critical part of our mutual investment: when Formic succeeds, so do you. Final compensation packages are carefully customized based on candidate preference for cash and equity balance, experience, geographic location, and market considerations. Our goal is to attract and reward top talent who will significantly impact our organization. We're open to meaningful discussions about compensation structure to secure exceptional team members. The anticipated base pay range for this position is detailed below. Base Salary Range:$115,000—$135,000 USD What we look for: We're building a company from the ground up, so every single person we hire has a massive impact on our team, culture, and ability to accomplish our mission. While each individual brings their own unique skills and perspectives to Formic, we look for people who share our vision and act in alignment with our Operating Principles. If this sounds like you, Formic could be the place for you! • Fearless Optimism: You share our ambitious vision of what we can accomplish. You're aware of the challenges we will face as a startup doing new things in an old space, but you're energized by the incredible opportunity we have to drive change for our customers, and for the manufacturing industry at large., • Factories First: You have a strong customer focus, no matter who your customer is. You seek to make things easier and better for our customers, even if it makes your job a little harder., • Today, Not Tomorrow: There are always plenty of projects to tackle in a startup, but you prioritize, take accountability for work, and have a bias toward action., • Be Right Often: You don't do things just because that's how they've always been done. You keep looking for ways to improve, seek out feedback along the way, and back your decisions up with data., • Made of Rubber: Just like rubber, when you fall you bounce back up. You know there's going to be a lot of challenge and change in our work ahead but you are adaptable, resilient, and ready to thrive through it all.

Job Description Full Time Equipment Installation & Troubleshoots/Repairs instruments and control circuits Salary Range: $25.00 To $32.00 Hourly Up to 90% Travel, any where in USA About Us Meurer Research (MRI) is a brand within Parkson Corporation. MRI engineers and manufactures advanced water and wastewater treatment equipment to solve complex issues facing treatment facilities worldwide. Our products include Inclined Plate Settlers, Hoseless Cable-Vac™ and Ultra-Scraper Sludge Collectors, flocculation systems, mixers, baffles, pilot systems, and package systems. MRI holds over 50 patents and has worked on over 5,000 installations cleaning more than 5 billion gallons of water each day. Position Description: Services products and equipment as assigned. Starts up, identifies, analyzes, and repairs instruments and products at customer’s location. Performs preventative maintenance, site surveys, installations and modifications as needed or requested by customers. Performs training at customer site. Troubleshoots basic control circuits. Determines parts to order for repairs and timeliness of need. Essential Functions: • Equipment Installation & Maintenance: Install, commission, and maintain water/wastewater treatment systems, pumps, valves, PLCs, HMIs, Controls, and related components., • Troubleshooting & Repairs: Diagnose and resolve operational and process issues with mechanical, electrical, and chemical treatment systems., • Field Support: Liaise with customer to provide on-site technical support, site surveys, inspections, maintenance of our equipment for water/wastewater treatment facilities, and provide feedback to Business Units for continuous improvement., • Customer Training: Educate clients on proper equipment use, routine maintenance, and troubleshooting techniques., • Regulatory Compliance: Ensure all work complies with local, state, and federal environmental regulations and safety standards. Education: • 2 years technical training in Controls/Programming, • 5+ years operation/troubleshooting experience in Water and/or Wastewater industry, • 3 – 5 years of Field Service experience, • Experience with ISO9001 requirements is desirable Knowledge, Skills & Abilities: • Strong understanding of Water/Wastewater treatment processes, pumps, motors, SCADA systems, PLC/HMI products and associated programming, • Thorough electrical knowledge of Control Panels and VFDs, • Ability to read and understand mechanical and technical drawings, • Excellent written and verbal skill, • Excellent problem-solving skills and ability to multi-task, • Computer skills in Microsoft Office Suite Licenses and/or Certifications: • None Required Travel: • Ability to travel up to 90% Benefits include health care (medical, dental, vision) with coverage starting on the first day of employment as well as 401(k) with company match and holiday pay. Parkson Corporation is committed to a diverse and inclusive workplace. Parkson Corporation is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Key Responsibilities Process Optimization and Development • Design, develop, and implement efficient and cost-effective manufacturing processes and systems for automotive components and assemblies (e.g., powertrain, body-in-white, chassis)., • Specify, justify, and manage the installation and commissioning of new manufacturing equipment, tooling, and machinery, ensuring compliance with automotive industry standards and safety regulations., • Conduct time studies, process capability analysis (Cp/Cpk), and root cause analysis of production issues to eliminate bottlenecks and improve throughput., • Develop and maintain accurate standard work instructions, process flow diagrams, and control plans.Quality and Continuous Improvement, • Collaborate with Quality and Design Engineering teams to implement Design for Manufacturing and Assembly (DFMA) principles and resolve part quality issues using methodologies like 8D or A3 problem-solving., • Drive continuous improvement activities using Lean Manufacturing and Six Sigma principles (e.g., Kaizen events, value stream mapping) to reduce waste, scrap, and rework., • Ensure all processes comply with IATF 16949 standards and internal quality requirements.Tooling and Equipment Management, • Manage the design, procurement, and maintenance schedules for jigs, fixtures, gauges, and production tooling., • Program and troubleshoot Robotics and automated manufacturing systems (e.g., welding, assembly).Project Management and Collaboration, • Lead capital projects from concept through to successful production launch, managing budgets, timelines, and vendor relationships., • Act as a technical liaison between Engineering, Production, and Supply Chain teams to ensure seamless product introductions and engineering changes.Required Qualifications, • Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field., • Experience: Minimum of 3-5 years of experience as a Manufacturing Engineer, specifically within the automotive or a highly regulated, high-volume manufacturing environment., • Technical Skills:, • Proficiency in CAD software (e.g., SolidWorks, Catia, or AutoCAD)., • Proven experience with high-volume machining, welding, assembly, or stamping processes typical in automotive production., • Solid understanding of statistical process control (SPC) and Measurement System Analysis (MSA)., • Soft Skills:, • Excellent problem-solving, analytical, and communication skills., • Ability to work independently and collaboratively in a fast-paced, high-pressure environment.Preferred Qualifications, • Masters degree in Engineering or an MBA., • Lean Six Sigma Green or Black Belt certification., • Familiarity with PLC programming (e.g., Siemens, Allen-Bradley).

Job Description Manufacturing Engineer Technician II FNA Group is a world class and leading manufacturer of consumer and industrial pressure washers and other outdoor power equipment. FNA's highly acclaimed brands include Simpson, Delco and CRX. Exclusive licenses with recognizable brands such as DeWalt, Stanley Black & Decker and Craftsman further strengthens FNA's market presence and awareness. FNA is a dynamic organization with unprecedented growth due largely to its ability to attract and retain highly talented associates. Recent expansion at the Mesquite facility has opened a Manufacturing Engineer Technician II position. This person will perform production sustaining activities for the Metal Fabrication department to maximize quality, productivity and safety, and drives continuous improvement and optimization. Duties/Responsibilities: • Supports the daily production needs related to the operation and programming of the laser, press brake, robot welder, pump testers, assembly lines and paint equipment, • Monitors the following processes each morning:, • Laser cut quality is within acceptable criteria, • Laser programs produce parts which match prints, • Press brake programs and tooling produce parts which match prints, • Revisions of formed parts match the current drawing amendments, • Robot weld quality is within acceptable criteria, • Preventative maintenance is up to date on laser, press brake and robots, • Increases production, assets capacity and flexibility, while minimizing unnecessary costs and maintaining quality standards, • Allocates and utilizes resources effectively to produce optimal results, • Collects and analyzes data to find places of waste, over processing or overtime, • Performs inspections of product throughout production cycle to ensure quality, • Maintains and modifies PLC-based automated conveyor systems, HMI's and drive systems, • Performs low-level software development and documentation for PLC controls, • Troubleshoots networks (Ethernet, Device Net, etc.), • Interprets quality control requirements to key personnel within the company, • Maintains an open dialogue with other engineers and managers to coordinate activities, resolve problems and improve performance/productivity, • Other duties as may be assigned Required Skills/Abilities: • Extensive knowledge of PLC programming and trouble-shooting, automation technology, quality, productivity, demand creation, inventory, and/or manufacturing processes, • Experience with metal fabrication, including laser nesting, laser cutting, CNC press brake, welding, robotic welding, tube bending and punching, • Strong organizational skills and attention to detail, experienced in handling several projects simultaneously, • Good oral, written and interpersonal communication skills, • Team leadership skills, able to convey a vision and drive results, • Adept with decision-making, root cause analysis and problem-solving, • Proven ability to implement process improvement initiatives, • Solid understanding of Key Performance Indicators (KPIs) and business management principles, • Proficient with databases, software development and Microsoft Office Suite, • Previous experience in the Outdoor Power Equipment or Power Tools industry a plus, • Able to handle working on and completing projects within tight deadlines while maintaining professionalism Education and Experience: • Technical Engineering degree or similar discipline preferred, • 3-5 years' experience in technical engineering or similar environment, • 8-10 years' experience in light to medium industrial equipment manufacturing, • 3-5 years' experience with robotic systems and / or CNC equipment, • Familiarity with Radan software, SolidWorks and Microsoft Office programs Physical Requirements and Working Conditions: Majority of work (approx. 90%) occurs in a production/warehouse environment, with periods of sitting at a desk using a computer and other office equipment. Moderate walking and standing in the warehouse, monitoring inspection and production activities, and interacting with line personnel. Work occurs around machinery with moving parts, moving objects/vehicles; exposure to heat, cold, dampness, humidity, slippery and/or uneven surfaces. Follow and adhere to all company safety policies and regulations. Job Posted by ApplicantPro

Job Description Controls Field Service Technician - Dallas, TX Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP / Controls and Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. A fully competent Controls Field Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center or industrial environment - testing and operations. Responsible for programming, integration, implementation commissioning, maintaining and providing emergency support on critical controls systems at customers' sites within their respective regional area. They will troubleshoot, install, and make upgrades to existing automation systems for power and cooling systems in a live, mission-critical environment. They will assist in complete startup, commissioning, and validation procedures of these systems. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions. Applies an intensive and diversified knowledge of complete BMS, BAS, EPMS - coding, testing and operations. Responsibilities: • Direct and monitor subcontractors (onsite and offsite) including scheduling, resource management and coordination of construction and start-up services as needed. Construction trades generally include various electrical, mechanical and equipment suppliers., • Install and wire BAS controllers and field devices including low voltage cable terminations, • Installation Coordination of BAS / HVAC Controls Systems, • Plan site activities for your team including organize job site materials, logistics, inventory, tools storage and security / access, • Lead installation teams on daily and weekly meetings, • Support the development and execution of additional services through change orders, • Cutover panels and systems in retrofit projects, • Develop and Implement Methods of Procedure (MOPs) for site activities, • Provide input to project team on developing RFIs, estimating and takeoffs for proposals, • Performs commissioning focused design reviews, prepares commissioning test procedures and reports, coordinates and oversees on-site testing, Startup, Commissioning and Closeout of BAS / HVAC Controls Systems, • Assist software lead with pre-functional and functional testing, • Execute troubleshooting of BAS systems including corrective actions, • Participate in commissioning efforts with external stakeholders, • Analyze system operation, work with project team to demonstrate system operation and verify consistency with the contracted scope of work, • Perform QA / QC of BAS and integrated systems using BAS software tools, • Provide installation inspections and other closeout duties to ensure customer acceptance, • Provide markups for shop drawings to document as-built conditions, • Communicate regularly with subcontractors, project managers, clients and commissioning agents on project progress, • Document and track issues and out of scope efforts, • Autonomous in day-to-day work with being given high level instruction on projects or assignments, • Discuss with technical support problems related to maintenance or operation of equipment, • Attend project bid walks, engineering surveys, BAS audits, etc, • QA/QC peer reviews for projects which candidate is not the engineer, • Optimize workflow and deliverables by developing templates, standards, automations, etc., • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs and commissioning agents on project progress, • Needs to be located in Pacific Northwest, • Open to traveling to job sites in the region - 75% of the time, • Critical Facilities / Data Center experience a must, • Experience with Distech Controls and Tridium Niagara BAS Platforms highly preferred, • Preferably 3-8+ years experience with BMS /BAS Controls, • Experience with any of the following systems (JCI, Metasys, Siemens, Honeywell, Automated Logic) a plus, • PLC / ALC Experience, • Experience with critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Requires knowledge of equipment manufacturer's specifications, • Ability to interpret AE construction drawings, BAS shop drawings, manufacturers wiring diagrams, standards documentation, submittals and product data sheets, • Ability to follow company and site safety requirements, • Must be able to complete Field Service Reports and Assignments accurately and within a timely manner, • Analyze and prepare documents, reports and correspondence, • Candidate must be willing to work nights & weekends when necessary, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Requires excellent verbal, written communication skills & customer relation skills, • Ability to work independently and resourceful with good initiatives, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Proactive, resourceful, delegator and a multitasker After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionJob Description Join us at the Atrium Windows Maintenance Career Fair on Saturday, October 11th, 2025, at 9001 Ambassador Row, Dallas, TX 75247, for on-the-spot interviews and exciting career opportunities from 10:00 AM – 1:00 PM (bring a translator if needed). JOB DETAILS Rotational Night Shift: 7 pm-7 am (3-2-2) Pay starting at $25.50-$29.50 plus a $2 per hour shift differential DUTIES AND RESPONSBILITIES Maintenance Technician II is an Electro-Mechanical position. Responsibilities will include but are not limited to, supporting manufacturing operations, adjusting and repairing equipment as needed, tracking usage of and ordering replacement parts • Diagnose and repair complex electromechanical problems with manufacturing equipment, • Perform detailed setup on equipment, including recipe changes and control adjustments, • Repair and keep mechanical machine components in top operating condition, • Perform simple to complex mechanical preventive maintenance Tasks following instructions, • Intermediate understanding of electrical principles such as voltage, current, and resistance, • Diagnose and repair electrical control circuits, field devices, sensors, photo eyes, etc, • Troubleshoot the inputs and outputs on PLC and repair issuesQualifications, • Minimum 3 years’ maintenance experience in a manufacturing environment, • Knowledge of and experience with Lock-Out, Tag-Out procedures, • Able to strictly adhere to safety policies/procedures and be committed to customer quality., • Must be available for regular standby assignments; work scheduled off-hours and emergency overtime, • Proficient in Word and Excel, • Ability to assist in Training Level I Technicians Additional Information Our location: 9001 Ambassador Row Dallas, TX 75247 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Senior Controls Engineer – Addison, TX (#F0008) Location: Addison, TX Employment Type: Full-Time About Impact Recruiting Solutions: Impact Recruiting Solutions is a specialized recruitment firm connecting top engineering talent with leading industrial automation companies. We partner with innovative firms to match skilled professionals with roles that drive technological advancement and operational excellence. Position Overview: We are seeking an experienced Senior Controls Engineer to lead automation projects for a dynamic industrial automation firm. This role requires expertise in PLC, HMI, SCADA, and DCS/DeltaV systems, along with project management capabilities. The ideal candidate will design, implement, and commission control systems while mentoring junior engineers and ensuring project profitability. Key Responsibilities: • Design and implement control system architectures (PLC, DCS, HMI/SCADA)., • Develop schematics, panels, and network designs (under 480VAC)., • Lead project execution, including budgeting, scheduling, and profitability., • Commission systems on-site and troubleshoot technical issues., • Mentor junior engineers and collaborate with cross-functional teams., • Education: Bachelor’s in Electrical/Control, Mechanical, or Chemical Engineering (or related field), • Licensure: PMP certification a plus, • Experience:, • 8+ years in industrial automation (PLC, HMI, SCADA, DCS/DeltaV)., • 2-3 years minimum with Emerson DeltaV platform., • Experience in PLC-5 to ControlLogix conversions., • Project management for systems up to $10M., • Technical Skills:, • PLC platforms: Rockwell Automation, Siemens, Modicon, • HMI/SCADA: Ignition, FactoryTalk, Aveva, GE iFIX, • Programming: Ladder Logic, Structured Text, VBA, SQL, Python, • Industrial networking: Ethernet/IP, Profinet, Modbus, • Competitive Compensation: Earn an attractive salary, • Comprehensive Benefits:, • Generous Benefits Package, • Work Schedule: Full-time with 25% travel (primarily local), • Professional Growth: Lead high-impact projects and advance your technical and leadership skills, • Impactful Work: Develop cutting-edge automation solutions for industries like Semiconductor, Life Sciences, and Food & Beverage

Job Description Position Overview We’re seeking a hands-on Manufacturing Process Technician to support the daily operation and upkeep of complex production and facility equipment in an industrial setting. This technician will be responsible for installing, maintaining, troubleshooting, and repairing a variety of machinery used in the manufacturing process. This is not a remote position—all work will be performed onsite in a dynamic production environment. Primary Responsibilities • Perform diagnostics and repairs on equipment used in production processes such as extrusion lines, CNC machines, electric and pneumatic presses, and systems incorporating hydraulics, pneumatics, robotics, and PLCs, • Conduct scheduled preventative maintenance and support continuous improvement initiatives to reduce machine downtime, • Occasionally coordinate with external contractors on building systems like chillers, compressors, HVAC units, pumps, and blowers, • Use judgment and hands-on skill to identify faults, disassemble machinery, source or fabricate parts, and test completed repairs, • Maintain a focus on safety in every task and encourage the same of others working nearby Key Skills & Capabilities • Ability to diagnose mechanical systems (gears, belts, bearings, etc.) and electrical circuits using appropriate tools, • Hands-on experience with precision measuring tools (e.g., calipers, micrometers), • Confident using various shop equipment like saws, grinders, hydraulic presses, and band saws, • Able to interpret technical drawings and manuals written in English, • Working knowledge of basic electrical systems and ability to use digital multimeters to identify voltage issues, faulty components, fuses, etc., • Strong problem-solving skills with a collaborative and team-focused attitude, • Competency in using Microsoft Office tools (Word, Excel, Outlook), • Comfortable working with Lean Manufacturing concepts and participating in improvement projects, • Familiar with industry quality and safety standards (e.g., ISO or AS/QMS frameworks) Physical Requirements • Frequently required to lift up to 50 lbs, stand for long durations, climb ladders, squat, bend, and work in confined areas, • Must have the ability to use sight, hearing, touch, and smell to identify issues with equipment, • Work is regularly conducted in environments that may be noisy, hot, humid, or cold Preferred Experience & Education • High School diploma or equivalent required, • 2-year technical or trade school certification preferred, • 2–5 years of relevant experience in equipment maintenance or industrial manufacturing, • Experience with PLC programming, AC/DC drives, or motor controls is considered an advantage, • Basic math skills and proficiency in English (reading, writing, speaking) required, • Must pass a background check and drug screening, • Valid state-issued driver’s license required (Texas license preferred if working in-state) Additional Notes • Will be expected to attend all required team training and safety meetings, • Must support production engineering efforts in yield improvement and process optimization, • May assist in revising SOPs and work instructions as part of ongoing process development, • Must maintain a clean and organized workspace in accordance with 6S standards

Job DescriptionCompany Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software., • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements., • Work to close tolerances using required gauges and inspection knowledge., • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos., • Train junior operators/apprentices., • Perform other tasks as assigned.Qualifications Technical Knowledge, Skills and Abilities: • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming., • Proficiency in Master CAM software preferred, • Must have a high work ethic, be a team player and work with a since of urgency., • Ability to read and comprehend complex machine and component drawings., • Ability speak/read English and understand verbal instructions., • Ability to analyze and solve problems., • Detailed oriented, self-motivated, ability to work well with limited supervision., • Ability to train others. Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Qualifications Responsibilities: • Setup and operation of Fanuc & HAAS CNC milling centers using Master CAM software. • Utilize blueprints, sketches, drawings, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements., • Work to close tolerances using required gauges and inspection knowledge., • Document information pertaining to setup and operation of each job utilizing written descriptions, sketches and/or photos., • Train junior operators/apprentices., • Perform other tasks as assigned. Technical Knowledge, Skills and Abilities: • 3-7 years of manual machining and CNC setup and operation utilizing conversational programming., • Proficiency in Master CAM software preferred, • Must have a high work ethic, be a team player and work with a since of urgency., • Ability to read and comprehend complex machine and component drawings., • Ability speak/read English and understand verbal instructions., • Ability to analyze and solve problems., • Detailed oriented, self-motivated, ability to work well with limited supervision., • Ability to train others., • Ability to work overtime and on weekends as needed for the position. Travel %: 0-10% Security: Please State if US Citizen or permanent Resident Required Additional Information Why Smiths Interconnect? • Global Impact: As part of Smiths Group, a global engineering leader, you’ll be working on ground-breaking technologies that make a difference in industries that are shaping the future., • Career Growth: Opportunities for professional development and career progression across Smiths Interconnect and the wider Smiths Group., • Innovative Culture: Join a collaborative and innovative team, where your ideas and contributions are valued and rewarded., • Competitive Package: We offer a competitive salary, benefits package, and performance-related incentives. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description (Hybrid) Description: Are you ready for a challenge? Do you enjoy programming and working with electrical/mechanical systems? As an Automation Engineer, apply your programming skills and engineering knowledge to develop software solutions that interface with and control hardware. This role combines independent work with collaboration across teams and clients, involving daily communication, project management assistance, and building lasting business relationships. About DMC: DMC is a leading engineering consulting firm, delivering high-caliber engineering and custom software development services globally. Specializing in innovative solutions for manufacturing, testing, and product development, our expertise spans industries from aerospace to consumer-packaged goods to healthcare, and more. Our engineers excel in staying ahead of cutting-edge technologies and delivering top notch solutions. We prioritize technical excellence and cultivate a collaborative environment for independent and team-based work, reflecting our commitment to professional growth and providing forward-thinking solutions to clients. Responsibilities: Engineering Levels II & III (3-5+ years relevant experience) • Programs applications in accordance with DMC programming standards and best practices to meet and exceed customer requirements, • Commissions solutions at customer sites (domestic/international travel as needed), troubleshooting electrical and mechanical systems, • Works with most industrial PLC/HMI/SCADA platforms (Siemens, Rockwell, Ignition, etc.), • Continuously learns relevant technologies with guidance, gaining knowledge in sales, business development, and project processes, • Supports system architecture design, performs engineering tasks at all stages, and takes on both leading and supporting roles, • Mentors and technically advises new team members, • Bachelor of Science in Mechanical, Electrical, or Computer Engineering (or related field), • Minimum GPA of 3.4, • Proficient in programming, including text-based languages and object-oriented concepts, • Quickly learns new technologies, understands complex systems, and builds on established patterns and models, • Efficiently manages multiple projects, works directly with customers, and responds to their needs, • Experience designing projects in industrial automation systems (e.g. PLCs, Motion Control, Process Control, HMI, SCADA, Robots, Machine Vision, etc.), • Strong written and verbal communication skills, with the ability to develop project proposals, • Engineer Levels II & III (3-5 years relevant experience): $95,000 - $115,000, • Benefits/Culture/Bonuses and More!, • Office Locations, • DMC Website, • Engineering Blogs, • Additional Career Opportunities

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: Provides engineering expertise in assigned areas to ensure that all products are designed, procured, and built in accordance with customer and company quality requirements for sales growth and profitability. Responsibilities: • Designs new products and redesigns existing products of moderate complexity to meet customer needs and specifications, • Provides technical support to internal departments and select customers, • Review drawings and documentation for compliance with project specifications and company policies and procedures, • Issues Engineering Change Release Notifications (ECN's), • Perform / Create / Update product design guidelines, customer standards, and / or analytical reports as assigned, • Investigates and suggests solutions to the Engineering Manager with regards to product related problems., • Compliance and participation in all Smiths Interconnect’s EHS programs, policies, procedures, and training requirements, • Other duties as assigned, • Work with a flexible schedule, • Up to 20% travel may be requiredQualifications, • Bachelor’s degree in engineering required, with an emphasis in Mechanical Design preferred; 2+ years of related experience., • Knowledge of engineering mechanics, physics, and manufacturing methods, • Experience with SolidWorks 3D modeling software or equivalent, • Understanding of GD&T, ANSI/ASME standards, • Experience on Finite Element Analysis (structural, thermal & fluid) preferred, • Ability to make sound decisions and accurate judgments, • Ability to follow and provide detailed written or verbal instructions and communicate effectively, • Strong interpersonal skills, balances team and individual responsibilities, • Attention to detail / self-directed and able to work under normal supervision, • May involve high stress situations and the ability to balance multiple priorities at a time, • Proficient with Microsoft Office products, • Oral and written communication skills in English Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: Responsible for the overall ISO 9001 Certifications, Document Control and Training. This role involves developing and maintaining quality processes, conducting audits, monitoring performance as well as training, and driving continuous improvement. The ideal candidate is organized, detail-oriented, and has strong communication, team building and problem-solving skills, with a passion for quality and fostering excellence. Responsibilities: • Conduct Quality Audits: Perform regular audits (internal and external), inspections, and tests to evaluate existing quality systems and identify areas for improvement, • Training and Development: Educate employees on ISO requirements, quality tools, quality standards and best practices through training, • Assists the Site Quality Leadership in maintaining ISO 9001 Certification, • Data Analysis and Reporting: Monitor and analyze performance data, compile test data, and prepare reports. Collaborate with teams to identify and address issues, developing action plans, • Documentation and Record Keeping: Maintain documentation systems and documents, including SOPs, work instructions, and quality control records, ensuring accuracy and compliance, • Problem Solving and Corrective Action: Investigate and resolve complaints and non-conformances, implementing corrective actions, • Training: Maintain documentation for site training including database.Qualifications Technical Knowledge, Skills and Abilities: • Bachlelor’s Degree (or equivalent experience) in engineering or related technical field, • 5+ of previous experience in an ISO auditor role, • Good problem solving and Quality background, • Time management skills., • Attention to details and ability to focus on assignment., • Knowledge of reading engineering technical drawings., • Knowledge of inspection microscope tools, • Have good computer skills and able to use Microsoft office products., • Must be able to work weekends when needed. Additional Information Why Smiths Interconnect? • Global Impact: As part of Smiths Group, a global engineering leader, you’ll be working on ground-breaking technologies that make a difference in industries that are shaping the future., • Career Growth: Opportunities for professional development and career progression across Smiths Interconnect and the wider Smiths Group., • Innovative Culture: Join a collaborative and innovative team, where your ideas and contributions are valued and rewarded., • Competitive Package: We offer a competitive salary, benefits package, and performance-related incentives. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release We are seeking a Senior / Lead Electrical Engineer to design, integrate, and improve the electrical‑controls backbone of our next‑generation manufacturing lines. You will own system architecture—from concept and specification through commissioning and continuous improvement—ensuring every robot, drive, and sensor operates in concert with our production goals. Key Responsibilities: Controls Architecture & Strategy • Define the multi‑year controls roadmap—hardware standards, network topologies, and safety objectives—aligned with business growth., • Establish best‑practice design guidelines for panels, wiring, and device selection. System Design & Specification • Lead the electrical design of robotic cells, automated test rigs, and high‑speed material‑handling equipment., • Produce single‑line diagrams, panel layouts, and BOMs; oversee contractor and vendor deliverables., • Select PLCs, safety relays/PLCs, drives, vision systems, and field instrumentation. Integration & Commissioning • Coordinate cross‑functional teams to bring new lines from dry‑fit through full‑rate production., • Plan and execute FAT/SAT, system validation, and hand‑off to operations., • Troubleshoot controls and power issues to ensure seamless ramp‑up. Data & Connectivity • Collaborate with OT/IT teams to ensure reliable network communication (EtherNet/IP, Profinet, OPC UA) and accurate data capture for OEE and predictive‑maintenance dashboards. Project Leadership • Manage $1 M–$10 M automation projects: scope, schedule, budget, and risk., • Present project status and KPIs to executive leadership and stakeholders. Safety & Compliance • Own electrical and functional‑safety standards—NFPA 70/70E, ISO 13849, IEC 62061—and perform risk assessments and validations., • Ensure UL / CE and ANSI/RIA compliance for all automated equipment. Continuous Improvement • Drive OEE gains by identifying cycle‑time constraints, power‑quality issues, and reliability gaps., • Implement energy‑efficiency and condition‑monitoring initiatives. Technical Mentorship • Guide a team of engineers and technicians; review designs, share best practices, and foster a culture of disciplined engineering. Minimum Qualifications: * B.S. in Electrical, Controls, or Mechatronics Engineering (M.S. a plus). * 10+ years in industrial automation / controls, with 5+ years leading complex projects. * Demonstrated success delivering multiple high‑throughput automation cells or lines—from concept through sustained production. * Strong knowledge of PLC/HMI hardware families, robotics platforms (Fanuc prefered), industrial networks, and functional‑safety standards. * Proven ability to translate technical issues into clear business impact for executive stakeholders. Preferred / Bonus Skills: * Experience in defense, aerospace, or other regulated manufacturing environments (ITAR, AS9100). * Familiarity with collaborative robots, AMRs/AGVs, machine‑vision inspection, or edge‑analytics solutions. * PMP or Six Sigma certification and experience with Lean manufacturing principles. #LI-UNION #ZR Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $115K - $232K

Job DescriptionDescription: The Slate River Systems’ Senior Controls Systems Engineer will design and implement MHE controls systems. These systems vary in complexity and scope and may include, but are not limited to: Pallet Conveyor, Case Conveyor, Sortation, ASRS and AGVs control, and may interface with Warehouse Control Systems (WCS), Robot Control Systems (RCS), Traffic Management Programs, Supervisory Control and Data Acquisition systems (SCADA). DUTIES AND RESPONSIBILITIES: • Develop standard controls hardware offerings as listed below but not limited to Standard Electrical Drawing Sets; Control Cabinets; Field Enclosures; Scanners, Scales, Profilers; Vision systems; Industrial Ethernet and Machine Communications; and Power Distribution., • Assist Project Engineering with Pre-Sales Support; Lead Hardware and Software Tech reviews; Hardware Design, PLC Software, SCADA Design and Emulation; Field Commissioning; and Final Acceptance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: QUALIFICATIONS – EDUCATION AND/OR TRAINING: • Bachelor’s degree in electrical, or related field with industry experience in controls engineering. EXPERIENCE: • 5+ Years of controls engineering experience directly related to material handling (Case/Poly Conveyor, Sortation Systems, Pallet Conveyor, AGVs, ASRS), • Must have experience with communication to WCS systems, • Experience with Emulation packages such as Emulate3D, • Experience with Industrial Ethernet Applications, • Experience with Power distribution, FLA Calculations, and Efficiency Calculations, • Experience working with cross disciplinary project teams, • Experience with Designing Control Systems and hardware following NFPA and UL, • Experience with Safety Standard such as ISO13849 GENERAL SKILLS: • Ability to travel at least 50% of the time., • Proficient in AutoDesk applications, mainly AutoCAD., • Demonstrable strong expertise with PLC programing in Rockwell Studio 5000 and the ability to work with other PLC platforms such as CodeSys and Siemens.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Senior Controls Engineer for our client in the Engineering Solutions domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Addison, TX Salary: $130,000-$165,000/Annually Role: Senior Controls Engineer Primary Skills: Engineering Role Description: The Senior Controls Engineer must have 10+ years of experience. For this role, you must be a highly skilled and experienced Senior Controls Engineer to join the team. This role requires expertise in implementing automation solutions using PLC, HMI, SCADA, and DCS/Delta V platforms. As a key member of the team, you will work directly with customers, lead engineers, and ensure the successful design, implementation, and commissioning of automation systems. This role requires strong problem-solving skills, technical proficiency, and the ability to foster customer relationships and secure repeat business. Major Responsibilities: • Automation System Design & Implementation: Lead the design, development, and implementation of innovative automation solutions. This includes developing control system architecture, selecting components, detailing schematic diagrams, programming controllers (PLC, DCS/Delta V), and programming HMI/SCADA systems., • Programming & System Development: Implement control systems using programming languages such as Ladder Logic, Sequential Function Chart, Structured Text, and other relevant languages. Knowledge of VBA, .NET, SQL, and Python for HMI/SCADA system development is preferred., • Networking & Protocols: Design and implement industrial networking systems to connect control components and instrumentation using protocols such as Ethernet/IP, ProfNet, and Modbus., • Project Management: Manage large-scale projects (up to $10M), including developing execution plans, budgets, work breakdown structures, scheduling, time tracking, financial tracking, and reporting. Identify and resolve project issues, manage conflicts, and ensure overall project profitability., • Leadership & Mentorship: Serve as a technical lead, guiding engineers and technicians, and providing mentorship to junior staff. You may also act as a Project Manager for smaller projects., • Customer Interaction & Business Development: Work closely with customers to identify requirements, develop specifications, and deliver solutions. Secure repeat business by maintaining strong customer relationships. Minimum Requirements: Education: • Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, Computer Science, or equivalent experience. Experience: • Over 8 years of experience with automation systems and platforms, including:, • In-depth knowledge of Emerson DeltaV platform, • Experience with PLC-5 to ControlLogix conversions, • Expertise in PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon, • Strong understanding of HMI/SCADA platforms (e.g., Rockwell FactoryTalk, Aveva System Platform, Ignition, Siemens WinCC), • In-depth knowledge of DCS systems, particularly Emerson DeltaV, • Project management experience; PMP certification is a plus, • Familiarity with Batch/Recipes, OEE, MES, and ERP systems, • Experience with electrical schematics, power distribution, control panels (up to 480VAC), and NEC standards, • Experience with AutoCAD is preferred, • Proven ability to lead and mentor a team of engineers/technicians, • Professional references from a subordinate, peer, and manager, • Ability to travel up to 25% Preferred Experience: • Experience in industries such as Semiconductor, Life Sciences, Building Automation, Food & Beverage, Water Treatment, and general manufacturing. Physical Demands of the Position: • Ability to see, perceive colors, hear, speak clearly, and have manual dexterity., • Ability to drive, lift objects, mount/dismount equipment, and perform pushing/pulling tasks as needed. Working Environment: Standard office environment with occasional travel to on-site locations and diverse industrial environments. Frequent use of computers, phones, and office equipment. Education: Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, Computer Science, or equivalent experience Experience: Minimum 10+ years of experience Relocation: This position will cover relocation expenses Travel: 25% travel Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job DescriptionDescription: Controls and Integrations Engineer Remote National Travel Required – 90 – 100% travel Candidates within a 1 Hour Radius of any International Airports through the continental United States of Americaare encouraged to apply and will be seriously considered Join Reiser as a Controls and Integration Engineer and Make an Impact! Are you passionate about technical problem-solving and providing exceptional customer service? Join a team with over 60 years of success in the food equipment industry, recognized globally for quality, innovation, and unmatched customer support. Reiser is the trusted name for food manufacturers, delivering better, smarter solutions in food processing and packaging. We take great pride in providing the resources our customers need to ensure their success. Our team of talented and passionate professionals works hard, embraces challenges, and is wholeheartedly dedicated to the success of our customers. This customer-centric focus has led to extraordinary growth, and we are now seeking an experienced Controls and Integrations Engineer to support our Service and Development teams. Our Vision • Robert Reiser & Co. will serve the food industry and other selected markets by selling and supporting equipment that provides solutions to customer needs., • Every customer contact will result in an improved relationship with that customer., • We will continuously strive to strengthen our supplier partnerships., • We will encourage our fellow employees to reach their potential. Our Controls and Integration Engineers play a pivotal role in delivering customized food processing and packaging solutions for all types of food manufacturers across the country. In this position you will be interfacing directly with sales, engineering, development and our customers, travelling to their facilities across the United States, and troubleshooting electrical and control systems. You will work on developing new equipment and applications with our Canton-based development and engineering teams. If you're passionate about automation, thrive on solving real-world challenges, and enjoy working closely with customers, this role offers the chance to make a real impact. The person in this role will drive innovation and system integration and play a crucial part of working with high-speed bakery production lines. They will primarily be working with Allen Bradley and helping migrate standard offerings based on a Sigmatek processor then to Allen Bradley specifically for bakery. At Reiser, our mission is to support our sales and service teams, take care of our customers and meet and exceed expectations. We value creativity, collaboration, and technical excellence, and we’re looking for someone who shares that mindset. Job Duties may include but are not limited to: Essential Functions • Work closely with Reiser Engineering, Service, and our customers to understand and troubleshoot systems., • Work with the Reiser Development team on R&D projects and develop solutions within a team-based environment., • Understand how to electrically integrate our equipment into our customer’s manufacturing lines including power requirements, digital signal handshakes, Ethernet interconnects, and PLC programming., • Generate required documentation including manuals, and procedures on new projects., • Train our technicians and customers in the proper use, maintenance, and repair of the electrical and controls systems of our equipment., • Learn and understand how our supplier’s equipment control systems work., • Creative Problem Solver – Able to think quickly and adapt when faced with unexpected challenges in the field, • Strong Understanding of Network Topology – Able to design, interpret, and troubleshoot industrial networks, • Service-Minded Approach – Com – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • Experienced Road Warrior – Comfortable with frequent travel, customer-facing environments, and remote troubleshooting, • PLC Configuration & Integration – Upload, download, and configure programs to/from Allen-Bradley PLCs, • Ladder Logic Proficiency – Read, interpret, and modify ladder logic to enhance or troubleshoot machine performance, • Custom PLC Programming – Tailor and adapt PLC code to meet specific customer or application requirements, • Industrial Network Integration – Seamlessly connect production line equipment into existing plant-level architectures, • Ethernet/IP Troubleshooting – Diagnose and resolve issues within existing Ethernet/IP network environmentsRequirements:, • Minimum of 3 years of electrical controls and integration experience., • A bachelor’s degree in electrical engineering or equivalent experience, • Knowledge of processing equipment., • Experience troubleshooting PLC’s (Allen Bradley Preferred), motor controllers, servo controllers, safety devices. Programming required., • Proficient experience interpreting and understanding US and European electrical schematics with AutoCAD and Draftsight., • Ability to communicate effectively with technical and non-technical people via reports, emails and verbal communication., • Strong curiosity and desire to learn new things., • Previous experience with an equipment manufacturer - food industry experience is highly desirable.

Job DescriptionSalary: $25 POSITION: Panel Technician II DWS ENERGY Founded in 2014, DWS Energy is a rapidly expanding, multi-disciplinary electrical construction company focused on electrical pre-fabrication services in our UL-508A certified panel shop, commercial industrial controls wiring, and utility-scale solar and battery storage (new construction and operations & maintenance). The organization has expanded its service offerings throughout its tenure and continues to grow at an accelerated rate. OVERVIEW: As a Panel Technician II, you will be responsible for the installation, testing, troubleshooting, and repairing of electrical equipment and devices. DUTIES: The duties and responsibilities of the Panel Technician II may include but are not limited to: • Install and modify electrical machinery, equipment, and circuitry in industrial or commercial applications/products, • Able to direct a level 1 on basic tasks of the project, • Complete understanding of Drawing for installation, • Ensure all electrical components installations adhere to standards., • Preparation of subpanels and enclosures for assembly of electrical components., • Installation of wiring of PLC Component layout according to drawings., • Complete knowledge of all components used for installation QUALIFICATIONS: The following are required skills and qualifications: • Previous experience installing electrical components, • Familiarity with electrical schematics., • Experience with hand tools, power tools, and electrical testing equipment., • Ability to self-direct work and assist less experienced techs/helpers, • Ability to take direction from supervisors and work with other team members toward a common production goal, • Ability to meet Deadlines and be detailed-oriented. REQUIREMENTS: The following are physical requirements: • Lift up to 50 pounds., • Use their hands to handle, control, or feel, objects, tools, or controls, stand for long periods of time., • Bend or twist their body, repeat the same movements, kneel, stoop, crouch, or crawl, walk or run for long periods of time. Character Traits: Teamwork, punctuality, self-motivation, accountability, honesty/integrity, persistence, hard-working, committed, trustworthy, knowledgeable are just some of the character values we foster. Benefits: The following are our benefits package offered for this role: • Competitive base salary up to $, • Bonus Program, • Strong benefits package. Application Process: To apply for the position of Panel Technician II, please submit your resume and a cover letter detailing your relevant experience and qualifications. We thank all applicants for their interest; however, only those selected for an interview will be contacted. DWS Energy is an equal opportunity employer and is committed to diversity, equity, and inclusion in the workplace. We encourage individuals from all backgrounds to apply.

Job Description Job Overview We are seeking an experienced Controls Engineer with Aveva Intouch software experience for field service operations nationwide. The ideal candidate will have extensive experience in industrial automation, control systems implementation, and managing automation projects. Responsibilities • Design, implement, and optimize industrial control systems and automation solutions at customer locations, • Lead project teams in planning, executing, and delivering automation projects, • Program and troubleshoot PLCs, HMIs, and industrial networks, • Develop and maintain control system documentation and specifications, • Perform system upgrades and modifications to existing automation systems, • Commission new control systems and equipment, • Work with customers to define project scope and requirements, • Manage project timelines, resources, and budgets, • Train customer personnel on system operation and maintenance, • Travel to customer sites across the United States Required Qualifications • 2+ years experience in industrial automation and controls, • Proficient in PLC programming (Allen Bradley, Siemens), • Strong understanding of industrial electrical systems, • Valid driver's license and ability to travel extensively Desired Qualification (not required) • Aveva Intouch (Wonderware) or comparable software experience Physical Requirements • Ability to lift and handle equipment up to 50 pounds, • Capable of standing, bending, and working in various positions for extended periods, • Comfortable working in manufacturing environments, • Valid passport for occasional international travel We Offer • Competitive rate based on experience, • Per diem and travel expenses, • Comprehensive benefits package including health, dental, and vision insurance, • 401(k) retirement plan with company match, • Company rental vehicle allowance, • Professional development and certification reimbursement, • Paid training opportunities

Job Description Senior Controls Software Engineer to Drive PLC & Robotics Automation - Dallas, TX Are you ready to take your career to the next level by designing innovative software solutions for large-scale automated assembly? We're on the lookout for a dynamic Senior Controls Software Engineer to join our talented team! If you're someone who loves diving into complex challenges and working independently on exciting new projects, this is the perfect opportunity for you. In this role, you won't just be writing code; you'll be crafting seamless automated solutions that are the driving force behind our operations. We value problem-solvers who are eager to make a real impact and contribute to our success. If that sounds like you, we can't wait to welcome you aboard! Why should you apply here? • Successful 25+ year old firm, • Large domestic and global clients, • Factory automation, Robotics, Device Control Systems, • Staff of 25 Engineers in this business unit, 16 Software Engineers, • High employee retention rate, • No-cost medical insurance for employee and family coverage What will you be doing? • Build new software for complex control systems, • Software development for low-level device drivers to application-level, • Work with motion control and robotics, • The language used depends on the project: C, C++, and C#, • New development, customized, and iterative, • Work on Siemens or Allen Bradley PLCs, • Collaborate with various corporate technical teams, including cross-functional, • Works directly with the customer to troubleshoot and solve critical problems within the automation system, • Ensure timely response and resolution to customer issues, • 30 % travel to customer sites domestically, and some travel to Europe What are the minimum qualifications? • Bachelor of Science in Electrical, Computer Engineering, Mechanical, Mathematics, etc., • Senior-level software development skills, full cycle, • Must have designed PLC Systems from scratch, • Must have experience with PLCs (Siemens and Allen Bradley) and HMI, • Must have had experience with hand tuning PID Loops and tuning motors, • Experience with a combination of languages, Ladder Logic, C, C++, and C#, preferably two of the three, • Experience programming software to control devices, • Excellent oral and written communication skills are a must What will make your résumé stand out? • Experience in factory automation or control systems, • Device driver experience, • Self-starter, able to work independently, act and deliver results, and exercise a high level of judgment Location: 100% on-site. Headquarters in Dallas, TX Relocation: Assistance offered Citizenship: U.S. Citizens. If necessary, you may need to get a DOD security clearance Salary: 130k - 150k, Paid Overtime for travel (10k - 20k), 401k matching is 6%. Fully paid medical insurance for employees and dependents

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: The Sr. Quality Assurance Engineer provides quantitative and qualitative reporting, to various functions and levels in the enterprise to assure compliance to established Quality Management Systems. This will be accomplished by performing the following duties: • Establishes and assures a program for internal, external and 3rd party audits (ISO9001, AS9100, ISO14001,and OHSAS18001, others) are completed to established schedule, • Establishes and assures effective root cause and closed loop corrective action updates in various databases (Internal Audit, RMA, MRB, NCR, 8D) for product related customer and supplier nonconformance’s Manage, • Establishes and assures periodic and on time quality record keeping, analysis and reporting of critical to quality (CTQ) indicators such as product defect rate, customer returns and cost of quality. Present departmental performance to senior staff members, • Provide and assures customer advocacy by understanding customer requirements and assuring compliance through root cause corrective action close loop corrective action planning and implementation, • Establishes and assures periodic quality record keeping, analysis and reporting of critical to quality (CTQ) indicators such as product defect rate, customer returns and cost of quality. Presents departmental performance to senior staff members, • Demonstrate and coordinate with various departments effective deployment of quality tools (8D, 5 Why, FMEA, Control Plans, 7 QC Tools), • Establishes and assures effective root cause and closed loop corrective action updates in various databases (Internal Audit, RMA, MRB, NCR, 8D) for product related customer and supplier non-conformance’s, • Establish and assures Change Management Review (EN, EICN) Process requirements are fully identified and validated, • Assures requirements Environmental, Health, and Safety Management Systems as well as Quality Management System are maintained in capability and control, • Constructively contributes to Department functions – meetings, goals, training, etc., • Review of High Reliability orders for C of C and data summary requirements, • Completes any additional assignments as requested by department supervisorQualifications Technical Knowledge, Skills and Abilities: EDUCATION / EXPERIENCE • BS Degree in Engineering or 5 to 10 years’ experience and/or training, or equivalent combination of education and experience, • Experience in Lab Environment, • Must demonstrate sound knowledge and skill in quality, • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Write detailed reports and correspondence. Attention to detail and accuracy is required, • Complex data analysis with good verbal, written presentation skills, • Work with mathematical concepts as required for basic statistical quality tools (SPC, CPK, DOE), • Use tools such as callipers, micrometres, optical comparators…etc., • Reads work orders, test manuals, performance specifications, wiring diagrams, schematics, blueprints and engineering specifications to obtain product information such as specified material, surface, finish dimensions, testing procedures and equipment to be used Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Assembly Seibi Technician Final Assembly (Onsite, 20-Month Contract) San Antonio, Texas About Us At CrossSafety, we provide comprehensive Health & Safety consulting, engineering, and recruitment services across North America. With over 200 professionals supporting clients in industries ranging from manufacturing to logistics, we are committed to integrity, excellence, and innovation in every project. We are currently seeking a highly skilled Assembly Seibi Technician to join the Final Assembly Production Engineering. This is an onsite role with extensive travel and hands-on responsibilities supporting assembly equipment installation, validation, and training. About the Role In this position, you will provide technical and skilled support to the Assembly Final Engineering team. You will be responsible for reviewing equipment specifications and drawings, performing vendor buyoffs, overseeing equipment installation and commissioning, troubleshooting, and training plant personnel on new systems. This role requires strong PLC programming and industrial controls expertise. 🔹 Work Location: San Antonio, Texas 🔹 Contract Duration: 20 Months (Potential Extension) 🔹 Travel: Up to 50% domestic and international (Japan, Canada, Mexico) 🔹 Work Schedule: As required, with occasional overtime (~30%) 🔹 Requirements: Steel toe boots required What You’ll Be Doing ✔ Review equipment specifications and design, identify improvements, and conduct vendor buyoffs to confirm equipment functions. ✔ Install, verify, and commission assembly equipment while ensuring safety, quality, and productivity standards. ✔ Investigate, implement, and adjust modifications based on trial results. ✔ Reduce project costs and time by confirming equipment quality at the vendor site before installation. ✔ Oversee vendor installation and facilitate kanban processes to minimize adjustment time during vehicle trials. ✔ Confirm equipment performance using secondary methods (torque checks, vacuum profiles, etc.). ✔ Install, set up, and troubleshoot Toyopuc and Allen-Bradley programmable controllers. ✔ Provide training to Maintenance personnel on new equipment. ✔ Share subject matter expertise with NAMC Maintenance and Production members. What You Bring ✅ 2+ years of PLC programming/troubleshooting experience (Toyopuc, Siemens, Omron, Mitsubishi, Allen-Bradley). ✅ 2+ years comprehensive knowledge of PLC systems, electrical circuits, and industrial controls. ✅ Technical degree or trade school completion in EET, Industrial Maintenance Technology, or equivalent work experience. ✅ Ability to read and interpret mechanical and electrical drawings. ✅ Ability to travel up to 50%, including international travel, and work up to 30% overtime when required. ✅ Physical stamina: ability to lift up to 40 lbs, frequent standing, walking, bending, kneeling, crouching, climbing ladders, and working in hot/cold or confined spaces. ✅ Manual dexterity to operate hand tools, power tools, and machinery. Bonus Skills (Nice to Have) 🔹 2+ years industrial maintenance experience 🔹 Knowledge of industrial robot programming and teaching 🔹 Experience with AGV/AMR setup and programming 🔹 Knowledge of safety scanners and programming 🔹 Familiarity with industrial control networking (EthernetIP, FLNet, ProfiNet, etc.) 🔹 Automotive manufacturing experience Interview Process 📌 One-round STAR/Video interview (60 minutes). 📌 Additional onsite hands-on assessment may be required. 🚀 If you’re ready to apply your PLC, industrial controls, and assembly expertise to support cutting-edge automotive production, apply today! Equal Opportunity Employer CrossSafety is committed to fostering an inclusive workplace. Accommodations for candidates with disabilities are available upon request. We thank all applicants for their interest; only those selected for an interview will be contacted.

Job Description Albireo Energy (AE) is recognized as the leading provider of Smart Building Solutions across the nation. A full suite of integrated solutions and services help building owners and managers improve building reliability and value, increase efficiency, and reduce operational costs while improving comfort for tenants. Through its operating divisions and corporate support, AE has a history of providing exceptional solutions to sophisticated multi-market and mission critical facilities such as data centers, life sciences, military institutions, government buildings, commercial real estate, colleges, schools and health care. Albireo Energy was formed in 2013 with the vision of becoming the largest independent smart building solution provider in the US. The approach is to acquire regional businesses in key geographies throughout the U.S. and invest in organic growth. Since our founding in 2013, we have completed eighteen acquisitions with 24 offices, approximately 1,100 employees, 25,000 installations in 44 states and more than 40 countries. AE has preferred access to industry-leading technologies from Schneider Electric, Johnson Controls, Automated Logic, Delta, Distech, Alerton, Tridium, General Electric, Rockwell and Lutron. Mission: Albireo Energy aspires to deliver mutually beneficial outcomes with each of our key stakeholders; employees, customers, vendors and investors. Our solutions for buildings will be professionally developed and delivered to meet or exceed expectations of each constituent. Vision: To be the largest independent smart building solutions provider in the United States. This position is responsible for assisting in the operation of the Central Engineering Department. An individual in this position will be expected to perform additional job-related responsibilities and duties throughout the facility as assigned and as necessary. In addition to the responsibilities below, the Systems Integrator executes controls projects with an emphasis on delivering PLC and HMI/SCADA products utilizing industry standard platforms while collaborating with Albireo Central Engineering to design robust industrial systems. ESSENTIAL FUNCTIONS: An individual must be able to successfully perform the essential functions of this position with or without reasonable accommodation. • PLC logic design and programming., • HMI design and programming., • Electrical control circuit design and review., • Field activities such as installation, commissioning, and site investigations., • Perform systems integrations using serial and ethernet protocols., • Conduct Factory Acceptance Testing as required., • Preparation of proposals and review of plans and specifications., • Meeting and presentations to customers, internal and external., • Preparation of technical memoranda, reports, and electronic deliverables., • Report to work on time and ready to perform assigned tasks., • Stay busy and look for opportunities to advance project completion., • Complete assigned Controls Product training as part of the position’s career growth plan., • Support a culture based on open/honest dialogue and involvement with all team members that demonstrates the value of their input and engagement in improving performance., • Support a culture of high performance and accountability in employee and site safety as well as other aspects of the business., • Complete weekly timecard accurately and timely by 9am every Friday morning., • Prepare and submit weekly expense reports by 9am every Friday morning or as directed. Requirements • Equivalent experience, vocational school, or a bachelor’s degree in electrical engineering, Mechanical Engineering, Robotics, Computer Science, or a related field is preferred., • Demonstrated experience performing systems integration duties with increasing independence based on level., • Demonstrated experience with common industrial automation communication protocols and implementation practices, including Modbus TCP/IP, Ethernet/IP, PROFINET, and serial equivalents., • By Level:, • Systems Integrator II: 2–4 years of experience in PLC programming, HMI/SCADA design, and electrical schematic design., • Systems Integrator III: 4+ years of experience in PLC programming, HMI/SCADA design, and electrical schematic design., • Familiarity with MS Office Suite of products including Outlook, Word, Excel, and intermediate computer skills., • Self-starter attitude that is inquisitive, intuitive, and willing to learn and grow., • Ability to document daily tasks, plan, and prepare for assigned responsibilities., • Prior experience supporting construction and field employee groups (1–2 years at I, scaling to 4+ years for III and Senior), including strong problem-solving skills, critical thinking, and initiative., • Excellent written and verbal communication skills, with the ability to prepare high-quality documents and reports. This position is open to the following locations: Orlando, FL; Tampa, FL; Jacksonville, FL; Washington, DC; Baltimore, MD; Richmond, VA; Sterling, VA; Norfolk/Virginia Beach, VA; Philadelphia, PA; Pittsburgh, PA; Wilmington, DE; Newark, NJ; Chicago, IL; Milwaukee, WI; Madison, WI; Minneapolis, MN; St. Louis, MO; Indianapolis, IN; Detroit, MI; Dallas, TX. Compensation: Level II: $40 – $48/hr, Level III: $49 – $56/hr, Senior: $57 – $65/hr Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Control Panels USA is seeking an experienced Field Controls Technician to join our growing team. In general, the Field Controls Technician is responsible for complete commissioning of hardware at customer sites including wire terminations, instrument configurations, radio/antenna installation/ alignments and general panel troubleshooting for project field work or service calls. The Field Controls Technician will utilize various hand and electric tools, analytical testing equipment and computer supported software. This role will be located at our Dallas office but have some flexibility to work in Central Texas area when needed a week at a time as needed. Who we are: Control Panels USA is a manufacturer of Control Panels and Relay Rack assemblies in a wide range of industries. We offer custom design and fabrication for OEM clients, contractors, and end users requiring either large or small production runs. Our factory in Austin, Texas houses state of the art engineering, manufacturing, and testing capabilities. This allows us to supply our customers with cost effective solutions while maintaining very competitive lead times. We strive to exceed our customer’s expectations while providing the highest quality products and services to our clients in the most cost- efficient manner. Why CP USA? Join our amazing team! Here’s what some of our employees have to say about CP USA: • Have always enjoyed working for CP USA. This is truly the best working environment I’ve ever worked in., • CP USA does an amazing job of making their employees feel appreciated. They also do great at recognizing strengths and giving people the opportunity to grow., • 100% employer paid medical, dental and vision insurance for our employees, • 401(k) with 50% matching, • Paid time off, • Reward & Recognition Bonus Program, • Quarterly company events Responsibilities include: • Review assigned scope of work with project manager prior to working in the field, • Coordinate and implement any training required for the project with the Project Manager, • Safety, • Instrumentation, • Controls, • Site specifics / other onsite training, • Ensure the following information has been gathered PRIOR to heading to the site, • Product Literature, • Material, • Clarification of Specification, etc., • Utilize template documents on all assigned tasks, • Parameter List, • Testing Documentation, • Calibration Documentation, • Daily Reports, • Time Sheet, • Credit Card Reconciliation, • Update panel schematics for CAD Designer to generate As-Built drawings, • Generate service tickets and daily reports, • Coordinate with Project Manager on assigned service calls for Invoicing, • Maintain Field tools and Test Equipment, • Maintain good relationship with customers, • Great communication skills, both verbal and written, • Ability to multi-task and prioritize in a high-pressure environment, • Intermediate computer skills and comfortability with Word, Excel, Outlook, etc., • Ability to pass CP USA’s Basic Electrical and Controls Theory, • Operational knowledge of multimeter functions, pressure calibrators, process meters, soldering wires, connectors., • Experience in the theory, application and calibration of flow, pressure, level, and temperature instrumentation., • Experience in troubleshooting complex relay logic using drawings and knowledge of motor/valve control logic., • Experience in wiring and troubleshooting loop powered and isolated 4-20mA analog control systems., • Must be able to work at elevated heights, including the use of ladders, • Great problem-solving skills, • Clean driving record, • Ability for overnight travel approximately 25% of the time, • Have flexibility to travel to Central Texas area for jobs a week at a time as needed., • Experience with commissioning program logic controller (PLC) software a plus, • Familiarity with wastewater and water treatment controls a plus, • Familiarity with radio/cellular telemetry systems a plus. While performing the duties of this job, the employee is regularly required to talk, hear, use hands and fingers, reach with hands and arms, drive, sit, stoop, climb, and stand. The employee must frequently lift and/or move up to 50 pounds and be willing to work in both indoor and outdoor conditions. Other Requirements: • Valid driver license, • Successful completion MVR check, • Industrial automation, • Municipal utilities Powered by JazzHR i49QuDy9NR