Power engineer jobs in Bay Shore, New YorkCreate job alerts

Principal Quality Engineer BUSINESS: CIRCOR Aerospace, Inc LOCATION: Hauppauge, NY DIRECT REPORTING: Quality Manager About CIRCOR Aerospace & Defense CIRCOR Aerospace & Defense is focused on the design, development, and manufacture of specialty fluid and motion control products for demanding aerospace and defense applications. CIRCOR products are flying on most commercial and military aircraft, including single and twin aisle air transport, business and regional jets, military transports and fighters, and commercial and military rotorcraft. Other markets include unmanned aircraft, shipboard applications, and military ground vehicles. Business units are in Hauppauge, New York; Corona, California; Warren, Massachusetts; Paris, France; Uxbridge, UK; and Tangier, Morocco. Parent company CIRCOR International is headquartered in Burlington, Massachusetts and CIRCOR Aerospace & Defense is headquartered in Corona, California. Principal Activities · Acting as first line QA contact for customer calls regarding product problems; then liaising internally with appropriate persons to give the customer a prompt response. · Raising and closing In Service Defect Reports (ISDRs). · Where appropriate raising of Corrective Action Requests (CARs) and leading root cause corrective action (RCCA). · Participate in product improvement programs to correct in-field defects and manufacturing abnormalities. · Working with production and other departments to resolve queries. · Carry out detailed "root-cause analysis" and formulate corrective actions. Manage the process of driving changes and improvements as a result of this. · Liaising with purchasing and with suppliers to resolve any supplier certification issues. · Direct contact with customers and suppliers on QA related matters. · Provide technical guidance on quality standards, specifications, and processes. · Drive improvements in key defect drivers, processes, and systems to enhance assembly performance and meet site quality objectives. CANDIDATE REQUIREMENTS Knowledge Skills & Abilities · A strong interest in Quality Assurance in the widest sense is prerequisite with an aptitude for problem solving and continuous improvement. · The job holder should have an outgoing personality and be comfortable dealing with customers and internal personnel at all levels. · Excellent problem-solving skills aimed at identifying and correcting the root causes of problems. · Demonstrated working knowledge of problem-solving tools: 5-Whys, failure mode and effects analysis, 8-D, Pareto analysis, fault tree analysis, Bayesian inference and Ishikawa diagrams. · Thorough knowledge of Word, Excel, Power Point, Visio, Project, and other applicable tools. · Knowledge of Mil Spec Standards. Education & Experience · Bachelor’s degree in Mechanical, or Manufacturing Engineering, or a technical field required with relevant work experience. · Experience with AS9100 and/or ISO9001 quality management systems. · Experience in Lean Six Sigma or continuous improvement practices. · Experience with leading root cause corrective action (RCCA) and applying quality methodologies and tools. PAY RANGE: $100K-110K. Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience CIRCOR is an EEO Employer of Females/Minorities/Veterans/Individuals with Disabilities Our Benefits: • Comprehensive healthcare plans, • PTO and family leave, • 401(K), • Work Life Balance, • Career Development, • Other Benefits & Perks Why CIRCOR: • Work in a collaborative and innovative environment with a focus on professional growth., • Contribute to a diverse and inclusive workforce that values individuality and creativity., • Competitive compensation package and comprehensive benefits.

LHH Recruitment Solutions has an opening an Electrical Engineer for our client in the Bohemia, NY area. This direct hire role allows you to expand your engineering career within a state-of-the-art technology organization. This on-site position requires a minimum of four-years current experience and a proven high proficiency in working with CANbus, VFD’s, PLC troubleshooting, Servo Drives and DC Drives as well as scripting languages. Successful candidates will have several years utilizing AutoCAD and MS Dynamics. Candidates with experience in utilizing/working on imaging equipment and robotics highly preferred. Salary range: $70000-90000 RESPONSIBILITIES: Collaborate continuously with the Mechanical, System Engineering teams responsible for the design of electro-mechanical and/or material handling systems. Optimization of actuators, robotics, and manipulators. Installation, programming & commissioning of systems. PLC programming and troubleshooting of control systems. Install, wire and configure electrical, into new and existing inspection systems. Review engineering drawings and designs to ensure compliance of internal guidelines, quality standards and national codes and standards. Create, revise, and finalize BOMs. Work with Production, Design & Installation teams to revise drawings and generate final as built package. Provide support to Technical Writing and Project management Teams in the creation of technical documentation, system manuals, and customer facing documentation. Test, troubleshoot and debug electrical, components and systems in-house and at customer locations. Collaborate with engineering teams (mechanical, electrical, software, imaging) to help resolve customer problems. Ensure all work is completed in compliance with all applicable local, state, federal Electrical standards. Potential travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • Bachelor’s Degree in Electrical Engineering., • Three (3) to Five (5) years of electrical electro-mechanical system design experience., • Proficient level of expertise in AutoCAD., • Experience working with and generating BOMs within an MRP or ERP system, preferably MS Dynamics., • Robotics programing highly preferred., • Previous experience troubleshooting electrical circuits., • Proven expansive knowledge of electrical circuitry., • Working knowledge of established electrical safety work protocols and practices and ability to read electrical diagrams., • Must have prior experience working with test equipment such as multimeters and oscilloscopes., • Knowledge in control programming environments or other scripting languages such as RSLogix, VB., • Must be highly versed in integration of DC Drives, VFD’s, Servo Drives, PLC’s and PC based control systems., • Working knowledge of CANbus, Controller Area Network (CAN) for real-time control system applications as well as a high proficiency with motor drives (Copley), PLC (Allen Bradley, Siemens) and PC based control systems., • Working knowledge of Pneumatic Actuator Control and Relay Logic., • Must be a US Citizen or US Permanent resident who is legally authorized to work in the US and able to successfully pass a background check and pre-employment drug test., • Will need to successfully pass a drug test and present a clean and valid driver’s license., • Established understanding and experience working with high voltage power levels (>1KW), • Previous experience wiring and installing electrical panels and wiring and integrating electro-mechanical components into a system. Health insurance, dental insurance and life insurance are offered with this full-time direct hire role. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

This role focuses on developing innovative power conversion solutions for industrial, medical, and research applications. Develop advanced power electronics, including converters and inverters, utilizing medium to high-power switching components (hundreds of kW) and related protection/gating circuit

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

Job Description Job Title: Electrical Engineer Job Description Develops concepts, designs, and documentation for electrical power distribution, control, and instrumentation systems for industrial machines. Designs machine controls including electro-mechanical relay systems, PLC systems and logic, drive control systems, and computer interfacing for the operation and control of measuring instrumentation and machine components of company products. Responsibilities • Coordinate the operation, maintenance, and repair of equipment and systems utilizing computer-assisted engineering and design software and equipment to perform engineering tasks., • Determine feasibility of designing equipment or modifying existing equipment considering costs, time limitations, company planning, and other technical and economic factors., • Compile and analyze operational, test, and research data to help establish performance standards for newly designed or modified equipment., • Prepare product or system layouts, detailed drawings, and schematics., • Proficiency in Electrical Systems Design of control boxes for industrial equipment., • Knowledge of machine design and parts design for machinery that contain control systems., • Bachelor's degree in Electrical Engineering., • 5+ years of experience in the design of electrical control and power distribution systems, or equivalent combination of education and experience., • Demonstrated ability to develop and implement computer-based software systems., • Experience with PLC programming, basic machine controls design, large motor and drive controller implementation., • Familiarity with electrical codes., • Knowledge of AutoCAD and MRP systems is a plus. The dress code is business casual, and the hours are from 8 to 5, with an hour for lunch. The candidate will work collaboratively with the engineering team, the manufacturing team, and all back-office personnel. This is a great opportunity to learn about manufacturing and machine design/build, and the company offers classes to help develop skills further. Job Type & Location This is a Permanent position based out of Deer Park, NY. Pay and Benefits The pay range for this position is $100000.00 - $125000.00/yr. Schenck USA Corp. offers a competitive salary along with generous benefits package including medical, dental, vision, FSA, HSA, disability, life insurance, voluntary benefits, pet insurance, group legal, ID theft, EAP, 401(k) with company match, tuition assistance, holidays and paid time off, employee service/recognition awards and seasonal/social events. Workplace Type This is a fully onsite position in Deer Park,NY. Application Deadline This position is anticipated to close on Nov 29, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $130,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: We are seeking an experienced Senior Verification Engineer to join our Engineering team. The successful candidate will play a key role in ensuring the functionality, performance, and reliability of FPGA-based designs through a comprehensive verification and validation processes. This position involves developing robust testbenches, creating advanced simulation environments, executing verification suites, and collaborating closely with Design Engineers to achieve first-pass success for FPGA implementations. Key Position Accountabilities: • Design and Development: Develop and implement verification plans, test strategies, and methodologies for complex FPGA-based systems., • Verification and Validation: Execute comprehensive verification processes, including simulation, testbench creation, requirement-based validation and verification per accepted safety standards, and regression testing to ensure design correctness and performance., • Collaboration: Partner with system architects, hardware engineers, and software developers to define requirements and deliver integrated solutions., • Troubleshooting: Diagnose, debug, and resolve FPGA-related issues, including hardware/software interaction challenges and performance optimizations., • Documentation: Prepare and maintain detailed documentation of verification processes, design methodologies, and test results to support traceability and knowledge sharing., • Mentorship: Provide technical guidance, mentorship, and best practices to junior engineers in FPGA design, verification, and validation techniques., • Planning: Develop project schedules, identify resource requirements, and support product development from concept through release., • Education: Bachelor’s or Master’s degree in Electrical or Computer Engineering (or related field)., • Experience: 8–15 years of hands-on experience in FPGA verification and development of complex digital systems, utilizing advanced verification techniques and methodologies., • HDL language & Verification Frameworks: Expertise in VHDL; working knowledge of Verilog, SystemVerilog and UVM for function verification., • FPGA Design Tools: Proficiency in Xilinx Vivado required; familiarity with Intel Quartus and Lattice Diamond is desirable., • Simulation & Debug tools: Experience using ModelSim/Questa and Xilinx Integrated Logic Analyzer (ILA)., • Technical Expertise: Solid understanding of FPGA architectures, digital design principles, and high-speed design techniques., • Protocols: Hands on experience with PCIe, 1G/10G Ethernet, and Time-Sensitive Networking (TSN)., • Problem-Solving: Strong analytical and debugging skills with meticulous attention to detail., • Communication: Excellent verbal and written communication skills, with the ability to collaborate effectively across multidisciplinary teams., • Experience with embedded systems and software development., • Familiarity with hardware/software co-design and system integration. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionAssociate Electrical Engineer Long Island, NY (Suffolk County) On-site | Full-time | Aerospace, Defense & High-Reliability Electronics • Must be US Citizen or Green Card Holder, • No Visa Candidates If you’re looking for a place where you can grow your technical depth, work alongside seasoned engineers, and see your ideas come to life in real products — this is the place to do it. The Opportunity As an Associate Electrical Engineer, you’ll be part of a collaborative team developing and testing advanced semiconductor and microelectronic products. You’ll gain hands-on exposure to real-world applications — from building and qualifying test systems to supporting product launches and improving reliability across complex assemblies. This is an ideal role for someone with a strong technical foundation who wants to bridge theory and practice, working in a lab environment that values curiosity, precision, and continuous learning. What You’ll Do * Design, build, and troubleshoot test setups for new and existing products * Support qualification and production testing of semiconductor and microelectronic devices * Contribute to PCB layout and assembly, test box development, and documentation * Assist in ATE (Automated Test Equipment) integration and code development (C# preferred) * Prepare and maintain test traveler documentation for production runs * Partner closely with production and engineering teams to ensure smooth product transitions from prototype to manufacturing What You Bring * B.S. in Electrical Engineering (BSEE) or equivalent technical background / relevant military training * Foundational knowledge of power electronics and analog/digital circuit design * Ability to analyze and troubleshoot circuits — both theoretically and hands-on * Exposure to C++, embedded code development, or C# test software (a plus, not required) * Eagerness to learn, collaborate, and take ownership in a fast-paced, high-impact environment Why You’ll Love It Here * Work directly with senior engineers and technical leaders who mentor and invest in your growth * See your work directly impact mission-critical systems for aerospace, defense, and medical applications * Be part of a stable, established company with a start-up feel in the lab — where innovation still happens daily

Job Description FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field, • 3-10 years of design engineering or relevant experience, • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $120,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This individual will play a pivotal role in driving test engineering and process improvements, optimizing designs, and supporting production operations, directing a team of engineers and technicians. This role requires a combination of leadership, technical expertise, and hands-on experience in test and process engineering within a high-reliability electronics manufacturing environment. Key Position Accountabilities: • Provides technical leadership to address challenges and introduce new capabilities to DDC’s Manufacturing and Test Engineering., • Oversees the design and development of test fixtures and software, ensuring the creation of innovative and reliable test systems., • Lead efforts to research and implement new testing methods, equipment, and techniques to enhance product testing capabilities., • Supervises, mentors, and develops a cross functional team of engineers and technicians, fostering a culture of continuous learning, growth and high performance., • Participates in the development of new products and supports the timely fabrication and testing of designs., • Leads the creation of new processes and procedures, contributing to teams of varied technical disciplines, and ensuring efficient process documentation (SOPs, travelers, etc.)., • Collaborate with design teams to develop innovative approaches that optimize product design trade-offs, including cost, performance, and time to market., • Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues., • Lead failure analysis investigations of in-house and customer-returned products. Collaborate with other engineering teams to make data-driven recommendations that improve product quality and reduce the likelihood of failures., • Manages the development and execution of project plans, including resource allocation and schedule oversight, ensuring the timely and successful introduction of new processes and test technologies in alignment with company objectives., • Propose and champion the implementation of new methods, capital equipment, technologies, and processes to enhance product performance and operational efficiency., • Participate in technical meetings with standards organizations, ensuring alignment with DDC’s strategic goals., • Coordinate testing, perform failure analysis, and support Applications Engineering in resolving product-related issues at customer sites., • Lead vendor selection for major design projects, considering technical performance, risk, and cost., • Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; Graduate degree and previous leadership training is desirable., • Experience: 7+ years of relevant engineering experience, with a focus on test or process engineering and manufacturing support; and 2+ years’ experience as a supervisor, lead engineer or senior engineer., • Technical Skills:, • Knowledge of MIL STDs 883, MIL-PRF 38534, 38510, IPC 610 (desirable)., • Proven expertise in designing, optimizing, and implementing test systems, fixtures, and software., • Strong knowledge of test equipment, failure analysis techniques, and process improvement strategies, • Familiarity with all aspect of Electronics manufacturing including Hybrid and PCB manufacturing., • Leadership Skills: Demonstrated ability to lead teams, mentor engineers, and manage complex engineering projects., • Communication: Strong written and verbal communication skills, with the ability to present technical information to a wide range of audiences., • Additional Skills:, • Knowledge of industry best practices and continuous improvement methodologies. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Jr Electrical Engineer Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Collaborate with Design Engineers to address issues related to test equipment hardware, software, reliability, and qualification across multiple shifts and facilities., • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Resolve test-related issues in conjunction with factory production personnel., • Test PCB layouts., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Basic understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usageCompany DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • analyze and solve non-routine and complex problems, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job DescriptionSalary: $120-$150K Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards., • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control., • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products. Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description Power Device Corporation (PDC) is a world leader in the design and manufacture of high-reliability Power and Control solutions (Components to Space Qualified SBCS and Radiation Hardened Components; Power Distribution, Control, and Conversion; Motor Control and Motion Feedback) for aerospace, defense, space, and industrial applications. PDC has served these industries as a trusted resource for more than 50 years…providing proven solutions that are optimized for efficiency, reliability, and performance. Power Device Corporation is headquartered in Bohemia, NY and has manufacturing operations in New York, California, and the United Kingdom. To continue to meet our customer’s mission critical needs, PDC is seeking a Test Engineer to join our respected and valued team. This role is 100% onsite in our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The salary range for this role is $80,000-$100,000. Job Description - Test Engineer This person will be responsible for maintaining, repairing, upgrading and troubleshooting production test equipment ranging from small manual fixtures up to large automated test stands. This equipment is used to test a myriad of products including small components up to large LRUs. This role reports into the Sustaining Test Engineering Manager and falls under the Operations organizational chart. Responsibilities / Experience Required: • Experience using lab equipment such as oscilloscopes, DVMs and AC/DC power supplies, • Ability to read and understand electronic schematics, • Capable of drawing schematics in Cadence OrCAD, • Good problem solving skills, • Report and respond to test equipment failures in a timely matter, • Experience maintaining test documentation / procedures, • Experience installing / updating test hardware and software, • Experience with CAN, I2C, GPIB, RS485 and RS232 communications, • Experience reading and writing test code using Visual basic, C++ and C#, • Strong skill set in Microsoft Office (Word, Excel, PowerPoint, Outlook), • Working knowledge of Microsoft Access, • Able to perform all duties listed above with minimal supervision or technical guidance, • Must be self-motivated, conscientious, reliable and responsible, • Must exhibit good decision-making skills, • A minimum 2 year degree in Engineering Technology with an Electronics focus, • 4-yr degree in Electrical / Computer Engineering is preferred, • At least 2 years of related work experience that includes the following:, • fabricating prototype circuits from schematics, • testing and troubleshooting complex test stations, • basic AC, DC and semiconductor circuit theory, • utilizing lab equipment such as oscilloscopes, DMM and AC/DC power supplies Benefits of working at PDC • People–Focused Policies, • Career Development, • Medical/Dental/Vision Coverage, • Generous Paid Time Off, • 401k with Employer Match, • Tuition Reimbursement, • Employee Referral Program, • Childcare Subsidy Program, • Fitness Center Reimbursement Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Construction Inspector My name is Bill Stevens, and I have a new full time Construction Inspector opportunity available for a major engineering firm located in Islip, Long Island that could be of interest to you, please review my specification below. The work schedule will be onsite in the firms offices in Islip. This position will be paying a competitive fulltime salary in the range of $145,000 - $155,000 plus an outstanding benefits package, P.E (Professional Engineer) education assistance and bonus structure. Responsibilities: Serve as the engineering firm’s representative on-site, providing daily oversight of contractors’ work to ensure compliance with approved plans, specifications, codes, and regulations. Monitor and document construction activities, including materials testing, quality control, safety compliance, and project progress. Review and interpret contract documents, shop drawings, RFIs, and submittals. Prepare detailed daily inspection reports, maintain accurate project records, and track progress against schedules. Conduct field inspections of structural and civil components, including foundations, concrete, steel, utilities, roadways, and site improvements. Coordinate with contractors, design engineers, utility companies, and municipal agencies to resolve technical and field-related issues. Review change orders, progress payments, and assist with project closeout documentation. Ensure construction adheres to all federal, state, and local codes as well as client requirements. Current Projects: Current projects include an Electric Power Generating Station in Brooklyn, NY where the firm is overseeing the rehabilitation of a large pier including the encasement of piles below the waterline as well as overseeing geotechnical investigations of potential future development site. Other current project sites include a Generating Station (façade and structural remediation efforts) and power plant (pier and pile cap restoration projects). Experience: Bachelor’s degree in Civil Engineering or Structural Engineering required. Professional Engineer (PE) license in NY is preferred but it is NOT required, in fact the firm will take steps to sponsor for the ideal candidates (PE) as well. More than five years of experience in construction inspection, resident engineering, or construction management. Knowledge of NYSDOT, NYCDDC, or other local agency standards would be a plus only and is NOT required. Strong understanding of structural systems, site/civil construction, materials testing, and safety standards. Excellent written and verbal communication skills for report writing and stakeholder coordination. Ability to work in the field in varying conditions and occasionally travel to project sites throughout New York City (5 boroughs), Nassau, and Suffolk Counties. The interview process will include an initial phone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume or please feel free to call me at any time with any questions.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job DescriptionLyteLoop is the future of data storage - “Storage in Motion” Since late 2015, we have been perfecting our proprietary, patent pending photonic method of data storage which puts data in a constant state of perpetual motion. Achieved through the use of ultra-high bandwidth lasers, data now moves in an endless circulating loop, taking up less space and using less electricity. The companies revolutionary “storage in motion” technique will transform how data is stored while providing a myriad of unique and customizable advantages based on the desired companies’ application deployed. The company now makes it possible to harness the power of data while consuming less energy. This exceptional technology not only increases data storage performance and utilization, but also reduces the total cost of ownership. Our advance offers a clear competitive edge for those coping with the limitations of wasteful data storage systems. Using state of the art photonics technology the company patented IP will enable countless applications including huge power savings for Data Centers, less heat production, cybersecurity solutions and many additional applications. Company is located in Great Neck, NYCandidate must be able to work in the office every day.Salary up to $175,000 base, plus bonus Linux, C Embedded, Device Driver level We are seeking a Sr. Embedded Software Engineer/Sr. Firmware Engineer/Sr. Embedded Engineer to join our team, with the following job responsibilities: • Participate in the design of network storage elements and their interconnect system., • Evaluate and solve synchronization and real-time high-speed data transport and reliability issues., • Participate fully in team discussions with other subject matter experts and contribute to the overall Storage in Motion system design., • Work with programmable laboratory equipment and automate its functionality., • Must be a self-starter requiring minimum daily oversite and able to work towards the key milestones effectively.Must have:, • 5+ years embedded development on Linux based systems., • 5+ years of experience with C and Kernel C, • Working knowledge and up-to-date experience with all aspects of Linux networking and network interfaces including:, • Recent experience writing network packet transmission and processing applications., • Familiarity with low-level network device drivers, • knowledge of the Linux kernel and components, • experience with Linux User-level and kernel level development, • experience debugging Linux systems.Additional qualifications - one or more of the following:, • experience with Linux Kernel driver development, • experience with network drivers and block drivers, • experience with LabView and scientific equipment, • Experience with Python, MATLAB and LabVIEW, • Experience with Linux shell scripts, user space daemon development and development of command line utilities, • Experience with high speed 10 gigabit and 100 gigabit per second Ethernet adapters, • Experience with Storage Area Network technology, Fibre Channel, iSCSI etc.

Job Description About Bell and Howell Bell and Howell delivers technology-driven Automation Services and Automation Solutions that help businesses optimize performance, reduce downtime, and improve customer experiences. Our Automation Services bring a dedicated team of expert mechatronic service engineers completely covering North America and backed by our Integrated 360™ advanced technology enabling remote repair, diagnostics, automated SmartOps Dispatch™ and 24/7/365 technical assistance for our clients. We provide a comprehensive and certified level of support for thousands of diversified clients. Our Automated Solutions product portfolio consists of next-generation equipment delivering best-in-class performance enhancing workflow efficiency and elevating customer experiences across multiple markets including retail, pharmaceuticals, packaging, mail production, ecommerce and manufacturing – all backed by the best service in the industry. Location: Edgewood, NY 2nd shift (10% differential) Pay Range: 25-30/hr. Summary: The Customer Service Engineer serves as primary customer contact on technical and service-related problems on a wide range of industrial, robotic and printing equipment. Diagnoses electronic, mechanical, software and system failures, using established procedures provided by our highly rated service training department. This job may include any aspect of field support, including electrical/electronics, hardware, software, PC’s, and networking. Provides technical support to customers on operational or maintenance aspects of system equipment. Determines most cost-effective repair/resolution to minimize customer downtime. NOTE: THIS IS NOT AN INFORMATION TECHNOLOGY (IT) POSITION – requires electrical and mechanical experience Job Responsibilities: • Primary responsibility will be to install, troubleshoot and repair a variety of industrial products that include, but are not limited to; printing and packaging equipment, cash recycling products, inserting and sorting machines, credit card attaching and processing systems, robotics and any other applicable third-party accessories attached as part of the system., • Schedule and perform regular predictive/preventive maintenance inspections on equipment., • Provide support by managing parts inventory, customer service calls and preventative maintenance schedules., • Foster positive customer relations and a high degree of customer satisfaction by communicating effectively with customers., • Act as a liaison between the customer and other departments/functions of the company. Competencies (Skills, Knowledge and Abilities): • Requires understanding of computer program functionality and software troubleshooting skills., • Strong interpersonal/customer relation skills., • Ability to build and maintain strong customer relationships by understanding their operations and instilling confidence with effective proactive communication., • Ability to effectively resolve conflict internally and externally., • Ability to accomplish the describe duties through appropriate hand, power, and testing tools/equipment., • Ability to reason logically and make sound decisions along with considering alternative and diverse perspectives., • Strong analytical, problem-solving, quantitative, and time management skills., • Ability to communicate effectively both orally and in writing., • Ability to understand, remember and follow verbal and written instructions., • Ability to work as an integral part of a team., • Ability to read and understand written procedures and diagrams for assembly and test., • Ability to develop and implement solutions to assembly problem., • High School degree or equivalent with 2-year degree or diploma in electronics/advanced mechanics/software training with 1+ years related industry/equipment experience, or equivalent combination of education and experience., • Requires strong electronics and mechanical background, understanding of computer program functionality and software troubleshooting skills This position requires minimal travel in the United States and Canada for training and other requirements. For field only, local travel time could be greater than 50%. Physical Requirements: • Ability to use standard and specialized hand, power and diagnostic tools and measuring equipment, such as oscilloscopes, DMM, gauges, etc., • Requires lifting to waist seventy (70) pounds., • Requires walking and standing; using hands to feel objects; reaching; and requires balance., • Requires bending, stooping, kneeling, crouching and/or crawling for periods of time., • Ability to work in a loud environment., • Ability to work in small, cramped areas., • Ability to work in elevated environment up to twenty (20) feet. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Bell and Howell is an Equal Opportunity Employer. It is company policy to administer employment based solely on an individual’s qualifications, ability and performance without regard to race, color, religion, gender identity, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation, age, national origin or ancestry, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status, marital status, or any other characteristic protected by federal, state or local law.