Product testing jobs in Medford, New YorkCreate job alerts

Job Description Position Title: Test Technician B REV000 Department: Hybrid Test Reports to: Test Technician B Job Code: 3i1171 FLSA: Hourly (Non-Exempt) EEO Category: Technicians For more than 50 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Test Technician B performs testing procedures to ensure quality and accuracy in achieving company shipping goals. This role will work closely with the quality, engineering and operations teams to support testing efforts and maintain high standards for product reliability and performance. Key Position Accountabilities: • Set up, configure, and adjust manual or automatic test equipment, • Perform a wide variety of test procedures with minimal supervision, ensuring all tests are conducted according to established protocols., • Set up, configure, and adjust manual or automatic test equipment, • Accurately record test results and complete procedural paperwork, ensuring all test data is properly documented and logged., • Ensure adherence to testing standards, reviewing test procedures and standard operating procedures (SOPs) for completeness and accuracy., • Perform routine calibration checks and maintenance of test equipment to ensure accuracy and reliability in test results., • Work closely with engineers, quality control teams, and production staff to report test results and provide feedback on any issues or discrepancies., • Participate in continuous improvement initiatives to enhance testing processes and improve overall efficiency., • Ensure that all safety, health, and environmental policies are followed during testing procedures., • Follow safety protocols within the testing environment, including wearing the required protective gear, handling materials correctly, and maintaining a clean and safe workspace. Required Knowledge, Skills and Abilities: • Knowledge of auto-test systems, temperature control equipment, and other testing equipment., • Proficient in using a microscope to inspect components and ensure proper functionality., • Strong attention to detail and ability to follow test procedures accurately., • Organizational skills and the ability to maintain accurate records and documentation., • Ability to effectively communicate with team members., • Technical, vocational, or military training in electronics, electrical engineering, or a related field is required., • Relevant certifications or additional training in electronics testing are a plus., • 2-5 years of experience in a related test technician role or equivalent technical background., • Strong hand-eye coordination and manual dexterity to use small hand tools and microscopes with precision., • Specific vision abilities required for this job include close vision and the ability to adjust focus., • Must be able to remain stationary for extended periods while performing assembly tasks., • Must be able to lift or move items up to 25 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $22.00- $29.00 hourly, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Test Technician B will perform moderately complex testing procedures to ensure product reliability and performance. This role works under general supervision and supports engineering, quality, and operations teams by conducting testing, troubleshooting issues, and maintaining equipment in accordance with company and regulatory requirements. Key Position Accountabilities: • Set up, operate, and adjust manual and automated test equipment to perform routine and moderately complex testing., • Execute established test protocols to verify functionality and performance of products., • Troubleshoot and resolve moderately complex testing issues, escalating advanced problems to senior technicians or engineering., • Maintain, clean, and calibrate test equipment to ensure accuracy and reliability., • Record test data accurately and prepare summaries for review by engineering and quality teams., • Follow established test procedures and provide feedback on potential improvements., • Support continuous improvement initiatives by identifying ways to improve efficiency and reduce testing errors., • Ensure compliance with all safety standards, including the use of protective gear and safe handling of test materials. Required Knowledge, Skills, and Abilities: • Proficiency with standard electronic test equipment (oscilloscopes, multimeters, auto-test systems, temperature chambers, etc.)., • Ability to perform troubleshooting and resolve routine to moderately complex test issues., • Knowledge of electronic testing procedures and methodologies., • Technical, vocational, or military training in electronics, electrical engineering, or a related field., • 3+ years of experience in a test technician role working with electronic systems or components., • Manual dexterity and hand-eye coordination to use small tools and microscopes., • Specific vision abilities including close vision and the ability to adjust focus., • Ability to remain stationary for extended periods during testing., • Must be able to lift or move items up to 25 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Retlif Testing Laboratories is looking to hire a full-time Facilities, Shipping and Receiving Clerk to join our Ronkonkoma, New York laboratory. This position is responsible for shipping, receiving and facilities maintenance functions at the company headquarters. Do you have experience with Shipping, Receiving and Facilities Maintenance and want a career, not just a job? This position pays $19-$24 per hour, depending on experience. We also offer excellent benefits, including medical, dental, vision, a 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you, consider applying today! ABOUT RETLIF TESTING LABORATORIES An industry leader for 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients. As a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team. RESPONSIBILITIES • Shipping, receiving and facilities maintenance., • Driving company vehicle to support business needs., • Maintains inventory of shipping materials and facility supplies., • Adheres to the use of all safety procedures and safety equipment for safe operating use., • Minimum High School Diploma., • Experience with UPS and Federal Express shipping procedures and forms., • Must possess a valid driver's license and maintain a clean driving record., • Must have a background that would permit the U.S. Department of Defense to issue a Secret Clearance, which includes US Citizenship, • Licensed Forklift truck operator certification a plus., • Box Truck driving experience a plus., • Ability to lift, bend, climb and twist., • Knowledge of basic computer skills: Microsoft Office Suite. WORK SCHEDULE The Facilities, Shipping and Receiving Clerk job in our Shipping department is typically Monday - Friday, 8:00 AM - 4:30 PM. Position could require flexible working hours- overlapping into some evening shifts, overnight stays as needed and overtime may be necessary at times, depending on customer needs. READY TO JOIN OUR TEAM? We understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you would be right for this job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $120,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This individual will play a pivotal role in driving test engineering and process improvements, optimizing designs, and supporting production operations, directing a team of engineers and technicians. This role requires a combination of leadership, technical expertise, and hands-on experience in test and process engineering within a high-reliability electronics manufacturing environment. Key Position Accountabilities: • Provides technical leadership to address challenges and introduce new capabilities to DDC’s Manufacturing and Test Engineering., • Oversees the design and development of test fixtures and software, ensuring the creation of innovative and reliable test systems., • Lead efforts to research and implement new testing methods, equipment, and techniques to enhance product testing capabilities., • Supervises, mentors, and develops a cross functional team of engineers and technicians, fostering a culture of continuous learning, growth and high performance., • Participates in the development of new products and supports the timely fabrication and testing of designs., • Leads the creation of new processes and procedures, contributing to teams of varied technical disciplines, and ensuring efficient process documentation (SOPs, travelers, etc.)., • Collaborate with design teams to develop innovative approaches that optimize product design trade-offs, including cost, performance, and time to market., • Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues., • Lead failure analysis investigations of in-house and customer-returned products. Collaborate with other engineering teams to make data-driven recommendations that improve product quality and reduce the likelihood of failures., • Manages the development and execution of project plans, including resource allocation and schedule oversight, ensuring the timely and successful introduction of new processes and test technologies in alignment with company objectives., • Propose and champion the implementation of new methods, capital equipment, technologies, and processes to enhance product performance and operational efficiency., • Participate in technical meetings with standards organizations, ensuring alignment with DDC’s strategic goals., • Coordinate testing, perform failure analysis, and support Applications Engineering in resolving product-related issues at customer sites., • Lead vendor selection for major design projects, considering technical performance, risk, and cost., • Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; Graduate degree and previous leadership training is desirable., • Experience: 7+ years of relevant engineering experience, with a focus on test or process engineering and manufacturing support; and 2+ years’ experience as a supervisor, lead engineer or senior engineer., • Technical Skills:, • Knowledge of MIL STDs 883, MIL-PRF 38534, 38510, IPC 610 (desirable)., • Proven expertise in designing, optimizing, and implementing test systems, fixtures, and software., • Strong knowledge of test equipment, failure analysis techniques, and process improvement strategies, • Familiarity with all aspect of Electronics manufacturing including Hybrid and PCB manufacturing., • Leadership Skills: Demonstrated ability to lead teams, mentor engineers, and manage complex engineering projects., • Communication: Strong written and verbal communication skills, with the ability to present technical information to a wide range of audiences., • Additional Skills:, • Knowledge of industry best practices and continuous improvement methodologies. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Design Engineer Bohemia, NY • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: • Design custom structural test fixtures that meet customer statement of work requirements, • Create fixture concepts based on requirements, • Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer, • Interfaces with customers and the engineering team to translate design needs, • Participate in and conduct initial and ongoing design reviews, • Select appropriate structural material based on engineering analysis, • Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies, • Create drawings to commercial standards that can be used for fabrication and assembly, • Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation, • Apply tolerances to ensure parts are produced with the desired fit, • Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems., • Familiarity with various fabrication methods, • Prepare fabrication plan and fixture assembly procedures, • Act as the technical contact for the fabricators and assemblers during the production phase of projects, • Supporting quoting efforts for Design/Fabrication as needed, • Collaborate with Project Managers to status ongoing projects, • Provide project engineering support during all aspects of the test program, • Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast., • Coordinate required resources and schedule required to conduct testing, • Interface with customers, • Write test procedures and test reports, • Travel as required within the continental US, • Overtime will be required during certain periods of a project Required Qualifications: • BSME or comparable, • 4+ years' experience working as a Design Engineer, • Currently hold an FE certification and eligible to go for a PE, • A PE licensure will eventually be required, • Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software, • Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products, • Knowledge of FEM/Analysis, • Must be a US Citizen and able to pass a drug test and background check, • Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements, • Ability to read and interpret test specifications, • Must be computer literate, including MS Office, • Must be able to work in a fast-paced work environment, • Ability to work without supervision and to provide technical consultation and guidance, • Experience managing labor and resource schedules, • Strong communication skills, both written and verbal, • Demonstrated technical innovation/guidance, project management, and problem solving, • Experience in using FEM software like ANSYS is a plus but not required, • Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company matching, • Paid time off, • Group life insurance, • Employee activities, • A family-friendly work culture Job Posted by ApplicantPro

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Summary \n The Design Engineer 1 is responsible for the analysis and development of designs for an aerospace system or subsystem or its support hardware within parameters established by design specifications. \n Essential Functions \n\n • Develops novel solutions to engineering problems\n, • Participates in trade-off studies of designs and solutions to potential or actual design and fabrication problems, providing necessary data on assigned aspects of specific studies.\n, • Participates in design reviews and coordinates resultant changes within immediate department and with Purchasing, Manufacturing, and subcontractors to assure scheduled completion of designs and end products.\n, • Support test conduct and evaluate test data.\n, • Evaluates mechanical systems and products by designing and conducting research programs, applying principles of mechanics, thermodynamics materials.\n, • Confirms system and product capabilities by designing feasibility and testing methods, testing properties.\n, • Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes.\n, • Provides engineering information by answering questions and requests.\n, • Maintains product and company reputation by complying with government regulations.\n, • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.\n, • Determine needs of the user.\n, • Must be a U.S. Citizen.\n, • BSME or Equivalent Educational Degree Required.\n, • Solid Modeling Required, SolidWorks Preferred.\n, • FEA Experience Preferred\n, • Analysis, Design, Presenting Technical Information, Conceptual, and Quality Focus Skills Required.\n, • Medical, Dental, Vision\n, • Life Insurance, Long-Term Disability\n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks first year!)\n, • 10 Paid Holidays\n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n For more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

Job Description Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Production Assembler is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our manufacturing processes by executing on our internal manufacturing and quality processes and procedures and contributing to continuous improvement and optimization efforts. This position's primary focus is to assist, contribute, and execute on the team's strategic plans for manufacturing stability and improvement. Power Connector's Production Assembler is a dynamic, adaptable, open-minded problem solver with manufacturing skills suited for individual and team contribution. This position is an integral part in sustaining and improving our manufacturing for expansion within our current industry and penetration into new industries. This position enjoys the inherent challenges of executing on manufacturing systems and processes in a diverse, dynamic, and growing organization. This position has a strong influence on the execution of the fundamental principles of deployed manufacturing processes. Responsibilities • Responsible for the assembly of raw materials, • Responsible for the breaking down of raw materials as needed for each product, • Responsible for the organization of necessary components to build product, • Responsible for assembly of product in accordance with daily, weekly, and monthly shipment lists as directed by supervisor., • Capable of manipulating items with weights less than or equal to 30 pounds, • Perform general housekeeping in order to maintain an extremely clean and safe environment, • Responsible for the safe use of tools that are required during assembly, • Upholding quality standards while meeting production quotas, • Proficient in the assembly of product in accordance with skills matrix (assembly of ~5-25% of all products)., • Proficient in the assembly of product in accordance with skills matrix (assembly of ~25-50% of all products), • Proficient in the assembly of product in accordance with skills matrix (assembly of ~50-75% of all products), • Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products)., • Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products)., • Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products), • Proficient in executing quality control inspection responsibilities:, • Inspect, test, or measure materials, products, installations, or work for conformance to specifications, • Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers, • Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required, • Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples, • Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded, • Mark items with details such as grade or acceptance-rejection status, • Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release, • Perform visual inspections of finished products, • Notify supervisors or other personnel of production problems, • Complete documentation needed to support testing procedures, including data capture forms, equipment logbooks, or inventory forms, • Discard or reject products, materials, or equipment not meeting specifications, • Calibrate, validate, or maintain laboratory equipment Education and Experience • Proficient in using standard assembly tools, such as screwdrivers, drills, and levers, • Ability to read drawings, specifications, manuals, etc., • Additional qualifications for Assembler Level V:, • Proficient in using inspection equipment, such as calipers and micrometers, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments, • Additional qualifications for Assembler Level V:

Job Description Southeast US Sales Manager We are seeking a dynamic and technically adept Territory Sales Manager to drive growth in the field of industrial digital X-ray and computed tomography (CT) solutions. In this role, you will be responsible for managing sales activities within a defined geographic territory, focusing on expanding our footprint in industries such as aerospace, automotive, electronics, additive manufacturing, and energy. The ideal candidate will possess a strong understanding of nondestructive testing (NDT) technologies and be capable of engaging with engineers, quality managers, and executives to deliver tailored imaging solutions that solve critical inspection challenges. You will play a pivotal role in identifying new business opportunities, nurturing long-term customer relationships, and collaborating with cross-functional teams to ensure client satisfaction and sustained revenue growth. Key Responsibilities: Sales Strategy & Execution • Develop and implement strategic territory plans to achieve or exceed sales goals., • Identify new business opportunities and expand the market presence by growing your sales funnel., • Forecast sales volumes and report on territory performance to leadership., • Build long-term relationships with customers by understanding their needs and providing tailored solutions., • Conduct regular client visits, product presentations, and business reviews., • Cultivate new accounts and grow existing business by upselling and cross-selling products/services., • Conduct market analysis to identify trends, competitor activity, and potential gaps., • Travel to customer and potential customer sites within the Region, and potentially elsewhere up to 50% to 60%., • Work cross-functionally with marketing, product development, and customer service teams to enhance customer experience., • Maintain accurate records in CRM systems, including client communications, sales activities, and follow-up tasks., • Prepare weekly/monthly sales reports and provide management insights. Required Qualifications: • Bachelor’s degree in a STEM field, • Three (3) to Five (5) years of relevant Technical Capital Equipment sales experience, • One (1) to three (3) years of experience selling both high-value products and systems solutions into industrial manufacturing environments, • US citizen or permanent resident., • Skills:, • Excellent communication, negotiation, and presentation skills., • Proven track record of meeting or exceeding sales targets., • Strong organizational and time management skills., • Proficiency in CRM platforms., • Willingness to travel up to 50 to 60% of the time., • Proficient in Microsoft Office Suite of Tools., • The ability to learn and demonstrate imaging software. Preferred Qualifications: • Experience managing a large or complex territory., • Background in Non-Destructive Testing in aerospace, oil/gas/pipe/weld, military or automotive industry is preferred EEO/VETs/AAP

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job Description Position Summary The Assistant Superintendent is responsible for helping manage field operations on the project assigned in order to achieve timely and profitable completion of each project. The Assistant Superintendent directly supervises field labor force, including laborers/craft workers. Candidate must be driven, detail-oriented and customer service-oriented. This position is located in Suffolk County, NY. Job Specifications • Direct, coordinate, and facilitate meetings for subcontractors, architects, and local authorities, • Actively assist in management of subcontractors, schedule, budget, and timeline on federal contract jobs, • Enforce all OSHA safety rules, Kokolakis Corporate Safety Plan and Job Specific Safety Plan, • Prepare & distribute focus schedules, • Assist project management staff with weekly progress updates for the CPM schedule, • Coordinate all required inspections (municipal, material, etc.), • Prepare & distribute detailed Daily Construction Reports (DCRs), • Host weekly subcontractor coordination meetings & provide detailed meeting minutes, • Hold start-up meetings with subcontractors to review scope of work, schedule & safety requirements, • Support logistics planning, • Manage QA / QC program, including inspecting & approving the work product, • Coordinate with third-party testing agencies and special inspectors, • Seek opportunities to enhance project efficiency, • Manage efficient & timely project close-out including punch list completion, • Other duties as assigned Knowledge and Experience Requirements • Minimum of 5 years experience in construction preferred, • Must have experience working on phased, occupied renovation projects, • Must be willing to supervise night shifts, • Current safety credentials to include OSHA-30, • Knowledge of Procore software is a plus, • Proficient in Microsoft Office (Word, Excel, and PowerPoint), • Knowledge in construction methods, practices, schedules, logistics, and budgets, • Professional demeanor in person, online, and via phone with excellent verbal and written communication skills Benefits • 100% Employer Paid Benefits for Employees (Medical, Vision, Dental), • Competitive Salary, • 401k Match, • Company Employee Stock Ownership Program (ESOP), • Cell Phone Allowance, • 3 Weeks PTO, • Holidays, • Volunteer Time Off, • Summer Fridays, • Paid Parental Leave, • Paid CPE/Dues/Licenses, • Mileage Reimbursement, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Attention All Third-Party Agencies, Headhunters, and Recruiters Kokolakis Contracting will not accept candidate submission by unsolicited third parties through this site or any company email address. All unsolicited candidates presented to Kokolakis Contracting will be considered the property of Kokolakis Contracting. Kokolakis Contracting will not be responsible for any fees associated with unsolicited candidates, nor will a contractual relationship be formed by the submission. Kokolakis Contracting will not be obligated and will not under any circumstances pay any fees to said third parties submitting candidates in this manner. Kokolakis Contracting only forms contracts with recruiters with whom we have an established business relationship and with whom we have in place a signed agreement. All contact with Kokolakis Contracting from third parties must be through our Human Resources Recruiting department. Outside recruiters are asked not to contact our hiring managers directly. Any contact made outside of the Kokolakis Contracting Human Resources Recruiting Department by a third party will cancel any future business relationships between the third party and Kokolakis Contracting.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description A confidential, established manufacturer of high-reliability electronics that supports aerospace, defense, and space programs is seeking an experienced Test Engineering Manager to lead test and process engineering at their Bohemia, NY facility. This is a hands-on leadership role where you’ll drive test innovation, failure analysis, and process improvements that directly impact mission-critical products. What You’ll DoLead and mentor a cross-functional team of test and process engineers and technicians.Oversee design, development, and optimization of test systems, fixtures, and test software.Drive failure analysis investigations for in-house and customer-returned products; provide data-driven recommendations to improve reliability and reduce failures. Develop and document new processes, SOPs, and travelers to support production and test operations. Collaborate with design, product development, procurement, manufacturing, and product assurance to resolve production issues and optimize product trade-offs (cost, performance, schedule). Manage project plans, resource allocation, and schedules for introduction of new test technologies and process changes. Lead continuous improvement initiatives focused on productivity, quality, and cost-effectiveness in both test and assembly areas. Research and recommend new testing methods, equipment, and capital investments to expand test capabilities. Qualifications Education: B.S. in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; M.S. or advanced technical training desirable. Experience: Minimum 7+ years in test or process engineering within electronics manufacturing; 2+ years in a supervisory/lead role. Proven experience designing, implementing, and supporting test systems and fixtures and performing failure analysis. Familiarity with hybrid and PCB manufacturing and high-reliability electronics production. Knowledge of MIL standards (e.g., MIL-STD-883, MIL-PRF-38534 / 38510) and IPC-A-610 is highly desirable. Strong leadership, communication, and project management skills. Ability to make data-driven decisions under pressure and manage competing priorities. Must be a U.S. Person (citizen or permanent resident) or otherwise able to qualify under export control requirements. Why This Role? Lead mission-critical test engineering for products used in aerospace, defense, and space applications. Influence product reliability and production efficiency through hands-on leadership and process innovation. Competitive salary band and opportunity to lead cross-disciplinary engineering initiatives.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.

We’re looking for Customer Support Product Testers across the US to work from home and help top brands improve their products before they hit the market.