Product testing jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Maintenance Mechanic who performs mechanical repairs on all production and non-production equipment. Key Responsibilities: • Follows all safety process and procedures in accordance with the job and Company policy., • Interprets machine operation manuals and identifies problem source., • Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment., • Specifies and quotes replacement items for manufacturing equipment and facilities., • Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment., • Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing., • Construct simple facility improvement projects (door frames, shelving, partitions, etc.)., • Visually inspects and tests machinery and equipment., • Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery., • Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains the physical structure of the establishment., • Must possess own tools., • Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required., • Be able to respond to call-backs in emergency break down situations on an as needed basis., • Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry., • The noise level in the work environment is usually loud., • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: Supervisory Responsibilities: None Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. · Follows all safety process and procedures in accordance with the job and Company policy. · Interprets machine operation manuals and identifies problem source. · Disassembles and removes, repairs and/or replaces defective components on manufacturing equipment. · Specifies and quotes replacement items for manufacturing equipment and facilities. · Performs preventative maintenance, including lubricating and cleaning of manufacturing equipment. · Performs simple repairs on building and grounds (windows, fences, doors, etc.) and plumbing. · Construct simple facility improvement projects (door frames, shelving, partitions, etc.). · Visually inspects and tests machinery and equipment. · Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem. or repair machine. · Cleans and lubricates shafts, bearings, gears, and other parts of machinery. · Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment. · Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic. equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment. · Repairs and maintains the physical structure of the establishment. · Must possess own tools. · Installs, programs, or repairs automated machinery and equipment such as robots or programmable controllers and a firm grasp of Ladder Logic is required. · Be able to respond to call-backs in emergency break down situations on an as needed basis. · Other duties as assigned. Requirements: Education High school diploma or general education degree (GED), or equivalent combination of education and experience. Experience 3-5 years related experience or training. Other Requirements Ability to read blueprints, interpret operation manuals; understanding of manufacturing equipment and facilities; ability to use hand and power tools and mechanical testing equipment; welding, machining and plumbing experience helpful. Computer Skills: Keyboarding Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Intermediate Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the employee is regularly exposed to humid conditions; moving mechanical parts; high, precarious places, extreme heat; extreme cold; risk of electrical shock; toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.

Job Description Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. Precise Tool & Manufacturing Inc. is recruiting for a skilled Equipment Maintenance Mechanic. JOB SUMMARY: Under the direct supervision of the Equipment/Facilities Maintenance Group Leader, the Equipment Maintenance Mechanic position is responsible for the installation, maintenance and repair of the CNC machinery and equipment. ESSENTIAL FUNCTIONS: • Assemble and install machinery and equipment to include wiring, electrical and electronic components, pipe systems, plumbing and programming to meet specifications., • Study blueprints and manufacturers’ manuals to determine correct installation and operation of machinery and equipment., • Prepare requisition for parts and materials needed to perform the job and record parts and materials used., • Analyze test results, machine error messages and information obtained from operators to identify and troubleshoot mechanical and electrical problems. Repair or replace defective parts and reassemble machinery and equipment., • Observe and test the operation of machinery and equipment to diagnose malfunctions using voltmeters and other testing devises., • Disassemble machinery and equipment to remove parts and make repairs., • Examine parts for defects such as breakage and excessive wear., • Perform routine preventative maintenance on machinery and equipment including cleaning, lubricating and adjusting parts to be certain that the machinery and equipment continue to run smoothly., • Operate newly repaired machinery and equipment to verify the adequacy of repairs., • Reassemble machinery and equipment after completion of inspections, testing and/or repairs., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine or repetitive., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated, including inspection equipment., • Strong mechanical aptitude., • Ability to communicate effectively in writing as appropriate., • Must use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Ability to use hand and power tools including hoists, saws, drills, wrenches, precision measuring instruments, electrical and electronic testing devices., • Ability to perform skilled work in a variety of building trades including having knowledge of materials, methods, terminology, equipment and tools used., • Must be able to interpret and work from sketches, blue-prints or drawings., • Must be knowledgeable of occupational hazards and standard safety practices in the heavy equipment industry., • Must be knowledgeable of OSHA regulations specific to the machining industry., • Technical School or Certification in Industrial Maintenance, • 5-10 years of combined experience in mechanics and repairer trades, precision production trades, • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203. Monday-Friday 7:30 AM to 4:00 PM

Job Description Territory Sales Representative: Job Summary: Are you financially happy in your current role? Does your current position have opportunities for growth and a rewarding career? If you need to make more money and have a pathway to career advancement, then Leaf Home is just the opportunity you’ve been looking for! Target earnings of $50,000 to $100,000+ As a Leaf Home territory sales representative, you will work to provide potential customers with your expertise and education about the benefits of LeafFilter gutter protection and gutter replacement. By doing a quick home inspection from the street we will teach you how to identify potential homeowner challenges that Leaf Home has the solution for. Primary Responsibilities: • Generate sales leads for our outside sales team by covering an assigned territory each day, going door to door and engaging prospective customers at their home about Leaf Home products (local travel required)., • Utilize a consultative selling approach to educate consumers on the benefits of Leaf Home and gather information for the sales team to reach out and schedule an in-person product demonstration., • Report daily results to the field management team and develop a collaborative working relationship with other sales representatives., • Ensure a high quality and accurate representation of Leaf Home products by representing the company professionally and ensuring that potential customers have an exceptional experience. Experience and Minimum Qualifications: • High school diploma or equivalent., • Valid Driver’s license, a reliable personal vehicle., • Ability to work evenings and weekends., • Excellent verbal and written communication skills at all levels to communicate with internal and external stakeholders articulately., • Highly motivated to sell with a self-driven desire to meet and exceed goals., • Customer focused and results oriented., • Professional demeanor and attire., • Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status). Physical Demands: • While performing the duties of this job, the employee must be able to work outdoors daily with exposure to the elements including inclement weather. Extended periods of walking / standing required., • Field office/manufacturing/construction environment., • Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Compensation package and benefits: • Industry-best compensation package with unlimited earning potential, • Paid training, • 401k with company match, • Mileage reimbursement, • Branded apparel, • Independent work, • Individualized career development programs, • Referral Program, • Mentorship program Travel Requirements: • Local travel required. Overtime/Additional Hours Requirements: • May be requested to work overtime on evenings and weekends dependent on business need. Diversity and Inclusion Statement: Leaf Home is committed to creating a diverse environment and is proud to be an equal opportunity employer. We strive to create an environment that embraces differences and fosters inclusion. Equal Opportunity Statement: Leaf Home will recruit, hire, train, and promote persons in all job titles without regard to race, color, ancestry, national origin, gender identity or expression, sexual orientation, marital status, religion, age, results of genetic testing, veteran status, or physical/mental disability (except where the disability prevents the individual from being able to perform the essential functions of the job and cannot be reasonably accommodated in full compliance with the law).

Job DescriptionFLOWER CITY GROUP is hiring LINE LEADS for our Kit Packing Department for our A and B Shifts! This is a perfect opportunity for anyone who is looking to be part of a fun, successful, and growing company within the printing and packaging industry! We Hustle, We Own, We Learn, We Invent, and We Believe! Do you? If so, apply today! Position Title: Line Lead Pay Type: Hourly FLSA Designation: Non-Exempt Reports to: Kit Packing Manager Location: Rochester, NY – LEE RD. Salary Range: $20 - $25/hour Summary/Objective: Responsible for ensuring proper components have been brought to the cell and are being assembled as instructed. Essential Functions: • Completes all start-up and during run checks of any items listed on the Bill of Materials. This includes ancillary items like glue, tape, and labels., • Ensures work instructions are understood and executed by production lines., • Verifies suitability of pack out to ensure safe delivery of products in good condition. This includes examining/testing a first piece sample for damage after:, • Drop test- if item is shipping in a parcel environment., • Stack strength test- if item is stacking on a pallet for truckload transit., • Jointly responsible, with Quality, for the accuracy of the finished product., • Tracks hourly production rates and keeps accurate counts of units produced., • Tracks and reports crew size on an hourly basis, • Monitors activity of crew members assigned to their respective production line. This includes ensuring assembly steps are executed according to work instructions, managing break and lunch times, and reporting any personnel issues to Management., • Responsible for maintaining production cell cleanliness and organization throughout the duration of the production run., • Responsible for production cell break down after job is completed., • Organizes “overs” at the end of job to ensure proper disposition., • Time management, • Strong interpersonal skills, • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. Requirement/Qualifications: • 1-3 years of experience in a Manufacturing setting, • A two-year degree or equivalent from a technical school, • Two (2) years of work experience or an equivalent of four (4) years in the industry AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job DescriptionDescription: Calling all Go-Getters!! Jimmy John’s is looking for self-motivated individuals to join our fun, positive, and efficient management team. Be part of a culture of Go-Getters and Rockstars that aims to offer convenience for everyday busy people. We succeed by establishing and maintaining long-term close relationships with our guests, offering outstanding service, and superior product quality at affordable prices. If you have a killer work ethic, an awesome attitude, and love providing customers with great service, we want you on your team! Job Summary: Delivery Drivers' primary responsibility is to deliver sandwiches to customers in the designated delivery area. Drivers are expected to check all products for accuracy against quality standards and deliver products to customers in a safe, courteous and timely manner. Requirements: Essential Functions Include: Execute quality store operations and deliver exceptional customer and store experience. • Take telephone orders, complete delivery tickets, and deliver orders to guests within a 5-mile radius of the store., • Delivers sandwich orders to customers in a safe, courteous and timely manner in established delivery area only., • Accepts payment from customers for orders and provides correct change without cash handling errors., • Works with management at the end of the shift to reconcile cash from delivery sales., • Always maintain a professional appearance in compliance with the dress code., • Adhere to all food, safety, and security guidelines., • Operate cash register and handle cash transactions while adhering to all cash handling policies., • Maintain the cleanliness and sanitation of the restaurant including but not limited to tables, floors, windows, beverage stations, restrooms, etc., • Operate food preparation machinery., • Make fast, accurate, and consistent sandwiches while complying with brand standards regarding portion sizes, recipes, systems, and procedures., • Pass the sandwich test at the end of the first two weeks of training and at any future testing times., • Foster an environment of teamwork and display a positive and enthusiastic approach to all assignments., • Perform other related duties as necessary. Job Type: In- Person, Part-time Shift: Day Shift, Evening Shift, Night Shift Expected Hours: 20-40 per week Benefits: Free meals* Early Access to A Portion of Earned Wages Before Scheduled Payday Paid time off Flexible schedule Opportunities for advancement Referral Program Requirements Must be at least 18 years of age. Must be able to lift 30-40 lbs. regularly throughout shifts. Ability to stand, bend, reach, and scoop throughout assigned shift. Ability to be mobile in walk-in refrigerator and freezer with temperatures ranging from 40°ree; F to -10°ree; F. Company Information At Jimmy John's, we slice our all-natural* meats and fresh veggies in-house every day. Our fresh-baked bread is made right here where you can see it, and our house-made tuna salad is fresh every day. The flavor of a ripe tomato, crisp shredded lettuce, combined with fresh-baked bread, fresh-sliced meat and real Hellmann's® mayo - that's when the magic happens. Made with love every single day since 1983. That's Jimmy Fresh! We are a locally owned and operated Jimmy John's franchise, with a fast-paced, high-energy environment where you get to interact with loyal customers every day. You are applying for work with a franchisee of Jimmy John's, not Inspire Brands, LLC. or any of its affiliates. Any information you submit will be provided solely to the franchisee. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees. McQuaid Sandwiches LLC is proud to be an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description The Company Friedman Vartolo LLP is a rapidly growing New York based real estate and default services law firm with 200+ employees across six states. The firm prides itself not solely on its superior legal product, but also on its innovative approach to business and problem solving. We offer a fresh, fast-paced energy, with a startup vibe. The Position Friedman Vartolo LLP is looking for the absolute best default litigators in each jurisdiction and anticipate compensating them accordingly. We're looking for bright, enthusiastic individuals, with a strong work ethic and a desire to work in a firm with numerous other high-level attorneys. The position requires a litigator capable of handling a wide array of litigated matters, including but not limited to, contested motions, appeals and evidentiary hearings. Responsibilities • Drafting of motions, briefs, and memorandums of law, • Conducting legal research, • Appearing on a wide range of court appearances including high level contested motions and evidentiary hearings, • Responding to relevant discovery related requests and motion practice, • Maintaining responsibility for all aspects of respective contested cases, including devising legal strategies and executing on legal strategies Requirements • 5+ years of experience independently handling contested motion practice, • Admission to practice law in the state of NY, admitted in NJ/PA/CT is a plus!, • Superior writing, research, and oral advocacy abilities, • Capable of identifying and resolving legal issues quickly and proficiently, • Able and eager to manage a heavy workload and produce a significant amount of legal work Compensation/Benefits At Friedman Vartolo, we believe that both ability and effort should be rewarded. To that end, we have an aggressive compensation package composed of a competitive base salary, bonus structure and competitive benefits package including medical, dental, vision, flex spending, 401k and gym/fitness membership reimbursement. ADA Compliance Consistent with the Americans with Disabilities Act (ADA), it is the policy of Friedman Vartolo to provide reasonable accommodations when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for Friedman Vartolo. If you require a reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact Recruitment at to request an accommodations. Location This position can be remote. Job Posted by ApplicantPro

Job DescriptionJoin Our Team in Rochester, NY Picture your day in a modern electronics facility where innovation and quality guide every move. You start by checking the production schedule, staging materials for the line, and ensuring every component is exactly where it needs to be. As boards arrive at your station, you assemble with precision, following specifications to the letter. Later, you shift gears—powering up test fixtures, validating performance, and troubleshooting any issues to keep product flow on track. What You’ll Do • Organize and move materials, kits, and components so assembly can run smoothly and efficiently., • Build electronic assemblies and subassemblies according to drawings, instructions, and quality standards., • Run functional tests, verify performance, and diagnose faults to ensure reliability before release., • Keep work cells spotless and tools organized to support safety, speed, and accuracy., • Coordinate with teammates across production to meet daily and weekly output goals., • Document work performed, record results, and promptly elevate discrepancies to supervisors., • Take part in ongoing training to expand skills in assembly, testing, and materials flow.What Helps You Succeed, • High school diploma or equivalent; further technical training in electronics is a plus., • Hands-on experience in material handling, electronic assembly, or test preferred., • Exceptional attention to detail and the ability to follow written and verbal instructions., • Foundational knowledge of electronic components and assembly practices., • Comfort working independently and collaborating within a fast-paced team., • Solid problem-solving mindset and a proactive, can-do approach.

Job Description Allient Inc. is currently seeking an Embedded Software Engineer to join our team in Rochester, New York! Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging. Apply now! Responsibilities: • Servodrive Development: Design, develop, and optimize embedded motion control and I/O algorithms and systems to meet performance and reliability standards., • EtherCAT Expertise: Utilize your in-depth knowledge of EtherCAT protocols to design and implement real-time communication systems, ensuring efficient and reliable data exchange between controllers and drives., • Product Architecture: Develop product architecture to establish frameworks for product development and address product sufficiency., • Testing: Create and maintain verification and regression tests for all aspects of the design of products developed by the team., • Fieldbus Technology: Apply your general expertise in Fieldbus technologies to integrate and optimize communication between our products and those utilizing other fieldbus technologies such as CANopen, Modbus/TCP, Ethernet/IP and PROFINET., • Technology Integration: Research and integrate new technologies to support product development., • Vendor Coordination: Coordinate technologies with industry partners and vendors; interface with vendors to select/customize purchased software, support programs, and hardware such as single board computers., • Development Cycle Management: Lead and engage in all aspects of the product development cycle including design, implementation, review, documentation, testing, and maintenance. Investigate product issues for problem resolution and enhancements to existing products., • Experience: 5+ years of professional experience in software engineering with a focus on embedded firmware development, EtherCAT and other fieldbus technologies., • Education: BS Degree in Computer Engineering, Electrical Engineering, or a related field., • Technical Skills Required:, • Expertise in embedded system design and real-time programming., • In-depth knowledge of EtherCAT protocols and real-time communication systems., • Strong understanding of general Fieldbus technologies and their application., • Proficiency with Windows operating system and computer operation; experience with QNX Neutrino or other POSIX-based operating systems is a plus., • Proficiency in C, C++; experience with C# and Python is a plus., • Must be a U.S. person due to ITAR regulations., • Technical Skills Desired:, • Experience in motion control algorithms and systems., • Experience with computer-based industrial automation motion controllers and soft-PLC; programming in IEC 61131-3, related development tools, and Relay Ladder Logic is a plus., • Experience integrating ROS 2 into embedded controllers running an RTOS, with a focus on motion control and servodrive interfacing., • Experience integrating serial encoders (e.g., EnDat, BiSS, SSI) into embedded control systems., • Proficiency in Python., • Ability to design, build, wire, and maintain test platforms used for evaluating electronic components., • Knowledge of FPGA design. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Founded in 1994 and celebrating 30 years in business, Mindex is a software development company with a rich history of demonstrated software and product development success. We specialize in agile software development, cloud professional services, and creating our own innovative products. We are proud to be recognized as the #1 Software Developer in the 2023 RBJ's Book of Lists and ranked 27th in Rochester Chamber’s Top 100 Companies. Additionally, we have maintained our certification as a Great Place to Work for consecutive years in a row. Our list of satisfied clients and #ROCstar employees are both rapidly growing— Are you next to join our team? Mindex’s Software Development division is the go-to software developer for enterprise organizations looking to engage teams of skilled technical resources to help them plan, navigate, and execute through the full software development lifecycle. As an independent decision maker, the Product Owner/Business Analyst directs the work related to the analysis, development, and testing resources associated with one or more agile teams; and creates shared understanding of solution requirements through user flows, acceptance criteria, and other agile artifacts. The Product Owner/Business Analyst is responsible for the definition of work in the Product backlog and for the prioritization of that work for their assigned team(s), meaning they are responsible for determining when product and application functionality is released into the market. The Product Owner/Business Analyst collaborates with the Product Manager to help formulate strategies to maximize revenue/retention and minimize risk for the clients of their assigned products. The Product Owner/Business Analyst maintains on-going relationships with their stakeholders and conducts research with clients in order to continuously make informed decisions. Essential Functions • Develops a deep understanding of the body of work, partners with the team and project stakeholders to elaborate clear solution requirements., • Partners with the Product Manager to translate high-level project deliverables into actionable product plans., • Communicates and collaborates with internal and external team members to identify product improvements, analyze user needs, identify project scope, and document features/high level functional requirements., • Facilitates PI planning projects alongside the Scrum Master to ensure scope and delivery plans align., • Collaborates with client stakeholders to work towards the client’s long-term product deliverables and project roadmap., • Partners with project stakeholders to provide clarity and support of project release planning., • Develops a deep understanding of the body of work, partners with the team and project stakeholders to elaborate clear solution requirements., • Ensures product backlog and project requirements are aligned., • Facilitates refinement of requirements via elaboration and grooming sessions to ensure scrum team alignment for functional and non-functional requirements., • Represents Product Management on project teams as the Decision Maker to assist in answering questions and to provide direction to project scrum teams., • The Product Owner role is generally assigned to projects with high impact to the company and requires strong partnership with the Scrum Master and Lead Engineer to provide project delivery and leadership to the agile team., • Provides direction and mentorship to the agile team and the Business Analyst to ensure project deliverables are understood and accepted by the team., • BS degree in Business, Communications, or related area preferred, or an equivalent combination of education and experience, • Two+ years of Product Ownership experience, • Experience within the Financial / Human Resource industry is a plus, • Preferred knowledge in any of the following areas: basic data analysis, public speaking, agile methodologies, software delivery life cycle (SDLC) Physical Conditions/Requirements: • Prolonged periods sitting at a desk and working on a computer, • Health insurance, • Paid holidays, • Flexible time off, • 401k retirement savings plan and company match with pre-tax and ROTH options, • Dental insurance, • Vision insurance, • Employer paid disability insurance, • Life insurance and AD&D insurance, • Employee assistance program, • Flexible spending accounts, • Health savings account with employer contributions, • Accident, critical illness, hospital indemnity, and legal assistance, • Adoption assistance, • Tickets to local sporting events, • Teambuilding events, • Leadership training, • License to Udemy online training courses, • Growth opportunities The band range for this role takes into account the wide range of factors that are considered in making compensation decisions including, but not limited to, skill sets, education, experience, training, certifications, internal equity, and other business and organizational needs. It is not typical for an individual to be hired at, or near, the top of the range for their role; and compensation decisions are dependent on the facts and circumstances of each case. The range for this role is $70,000 - $120,000. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor, or take over sponsorship of an employment Visa at this time.

Job Description Akkodis currently has a Senior Software Engineer position with a client located in Rochester, NY. This is an onsite position, so the person needs to live within 40 miles of Rochester, NY. No C2C or agencies allowed with this position. Rate Range: $65.00/hour to $75.00/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Senior Software Engineer who will focus on solving complex technical challenges, helping to guide technical decision-making, and mentoring other engineers. This full-time position offers an immersive experience in system architecture, hands-on design, and cross-functional project collaboration, all while contributing to a dynamic new product development portfolio. Specifically, this role will involve: · Systems Architecture: Contribute to both high-level system frameworks and low-level design details. Integrate subsystems, participate in testing, and observe how technical decisions align with broader business goals. · Hands-on Development: Get involved with the end-to-end process—from initial concept and design to build, test, and pilot shipments. · Cross-functional Collaboration: Work closely with engineers and scientists from other disciplines, including electrical and optomechanical engineering, color science, spectroscopy, and data analysis. · Technical Reporting: Design and conduct experiments and analyze qualitative and quantitative data to support future development decisions. The ideal candidate should have: · Educational Background: Completed a Bachelor’s or Master’s program in Computer Science, Electrical Engineering, Computer Engineering, or a related field. · Work Experience: 8+ years of work experience in a related field is desirable (or a Master’s degree and 5+ years of experience) Desired Skills: · Eagerness for collaboration, learning, and contributing innovative ideas · An understanding of experimental methods and an interest in automation · Strong knowledge of C++ fundamentals, including more modern concepts such as move semantics, copy elision, and concurrency with the standard library · Deep experience with revision control (Git), build systems, and other ‘Devops’ infrastructure, and a desire to continuously improve workflows · Advanced automation and data analysis in a scripting language like Python/MATLAB · Intermediate knowledge of electrical circuits and microcontrollers · Experience with low-level communication interfaces such as SPI or I²C · Strong analytical abilities, clear technical communication, and a proactive approach to problem solving If you are interested in this Senior Software Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Jim Tobin at mailto:"> Equal Opportunity Employer/Veterans/Disabled Pay Details: $65.00 to $75.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Title Coating Technician I Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Shift Schedule: Monday - Friday, 6am - 2:30pm

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job Description Our client, a leading manufacturer of aero engines and industrial gas turbine components, is a globally recognized public company with a remarkable 75-year history of growth and innovation. Renowned in the aerospace industry, it offers an exceptional company culture that fosters development and provides diverse opportunities. Forbes has honored it as one of the World's Best Employers, highlighting its commitment to excellence and inclusivity. Why consider joining our client? • Publicly traded company on a path of continuous growth and recognized by Forbes as a top global employer, • Exceptional insurance coverage and 401 (k) matching program, effective upon hire., • Employer contribution to your Retirement Savings Plan account each pay period, • Vibrant company culture and collaborative team environment, • Access to excellent training programs for professional development, • Free fitness center membership Job Summary: This position will support the Senior Financial Analysts in conjunction with Plant Controllers in the direct supervision of the day-to-day general accounting functions and coordination of the month-end closing process, and the daily/weekly monthly financial reporting. Assist in the development of financial plans and forecasts, and the analysis of operational results. Prime day-to-day responsibility will be cost accounting; monitor and report inventories, standard cost revisions, and the operating budget and forecast will be key responsibilities. Roles: • Assist with General Accounting functions such as financial reporting, fixed assets management, inter-company accounting, and daily expense analysis., • Assist with month-end closing, including preparing and posting of journal entries, reconciling monthly ledger accounts, and helping establish accounting policies and procedures., • Assist in monitoring and managing the Raw material, work-in-progress, and Finished goods inventory., • Assist in establishing and monitoring the standard cost for each product and monitor MRP reports like Inventory, cost absorptions, and variances. Manage and analyze standard costs, BOM and routers., • Assist in the preparation of the monthly business review and Business Unit Staff meeting packages., • Assist in financial, internal, and governmental audits to maintain compliance., • Perform a monthly testing of internal controls, including SOX controls, using Audit and self-assessed tools (ASAT) to ensure compliance with corporate standards and document observations using an online portal., • Assist the local finance team in monthly/quarterly/annual forecasting/budgeting as needed., • Provide budget and project analysis for capital expenditure., • Participate in the company's continuous improvement projects to assist in identifying opportunities and implementing cost-saving objectives., • Assist on special projects for plant, division & corporate management. Knowledge and Skills: • Excellent interpersonal communication skills, managerial skills, self-motivated, and team-oriented skills., • Strong knowledge and understanding of GAAP, with solid analytical and strategic planning skills., • Must be proficient with computer systems and have excellent Excel skills., • Good communication skills, flexible, and a strong desire to learn. Basic Qualifications: • Bachelor's Degree in Business Administration, Finance, or Accounting is required, • Must have a minimum of two (2) years of relevant experience in a manufacturing setting, • Familiar with cost accounting in a manufacturing environment, • Advanced Microsoft Office skills, including Excel and PowerPoint, • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Job Description Overview CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Quality Engineer II. Type: Contract Job Title: Quality Engineer II Location: Woodland, CA Candidates must be able to commute and work onsite in Woodland, CA Pay Rate: $44.43 to $58.24/hour Work Hours: M–F 8am–5pm Education: Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Description The Quality Engineer II will develop and support all Quality Management System (QMS) and Regulatory Affairs (RA) activities in alignment with site quality goals and metrics. This role is responsible for new product setup, quality project management, and ensuring regulatory compliance for serum products. The position will ensure compliance with in-house and external specifications and standards such as cGMPs, 21 CFR 820, ISO 13485, and Quality System Procedures. Requirements • Ensure compliance with new and changing regulations impacting products and processes, including QSR’s and global import/export regulations, • Manage new product setup and related projects, • Support supplier audits as needed, • Collaborate with USDA on regulatory compliance, including approvals, import/export compliance, traceability, quarantine, safety testing, and affidavits, • Serve as a resource for customer regulatory and technical inquiries, • Maintain ISO 13485-based quality system, • Implement and manage CAPA (Corrective and Preventive Actions) and problem resolution, • Lead quality documentation, nonconformance reports, inspection activities, and product disposition, • Review and revise procedures, specifications, and forms to maintain and improve the QMS, • Act as the Quality Help Desk and customer complaint contact for problem resolution, questionnaires, certificates, and surveys, • Perform internal audits in support of internal requirements, 21 CFR 820, and ISO 13485 compliance, • Represent the organization in customer quality audits, supplier quality audits, and regulatory inspections, • Conduct investigations and analyses to resolve quality issues, • Collaborate with cross-functional teams to support quality system implementation, • Create new product master files to meet customer and quality system requirements, • Ensure compliance with company policies and departmental procedures, including product performance verification, problem investigation, process improvements, and non-conformance prevention, • Provide training on quality systems and applicable regulations, • Track and trend QMS metrics, • Perform other duties as assigned Required Qualifications Education • Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Qualifications • Minimum 3 years’ experience in Quality or Regulatory, preferably in medical device, pharmaceutical, or biotechnology industries, • Strong knowledge and application of Quality Systems Regulations 21 CFR 820 and ISO 13485, • Ability to develop, update, and train on SOPs, • Experience performing internal/external audits, • Ability to monitor QMS activities, including Change Control, CAPA, Complaints, and Nonconforming Materials/Products, • Problem-solving skills for investigations and root cause analysis, • Experience with Continuous Improvement, Lean, or Six Sigma Desired Qualifications • SAP, EtQ, and/or PeopleSoft experience, • Statistical analysis experience, • Project management experience, • Knowledge of animal by-product import/export regulations, • Background in animal health, virology, immunology, or epidemiology Soft Skills • Strong organizational, time management, and attention to detail skills, • Excellent interpersonal and communication abilities, • Ability to work independently and influence others in a collaborative team environment Additional Information • No third party resumes will be accepted, • Drug testing and/or other employment-related inquiries may be conducted, • CTG will consider for employment-qualified applicants with criminal histories in a manner consistent with the requirements of all applicable local, state, and federal laws, • All interested individuals MUST be able to work on a W2 Tax basis (no C2C or third party vendors), • CTG is an Equal Employment Opportunity employer, • CTG is an E-Verify Company To be considered for this opportunity, please apply directly through our website by clicking the link below or email your Word version resume and salary expectations to . The expected base salary for this position ranges from $44.43 to $58.24/hour. Salary offers are based on relevant skills, training, experience, education, market factors, and applicable licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job Description Allient - Rochester (formerly ORMEC Systems, Inc.), a subsidiary of Allient Inc., specializing in motion control products and engineering services, including motion controllers, servo drives, motors, and electro-mechanical motion control and automation solutions is currently seeking a highly skilled and ambitious engineering leader to join our Rochester, New York team! Allient Rochester’s Director of Engineering is a key leadership role responsible for driving engineering innovation, program execution, and team development. This is a hands-on role that manages a team of hardware/power electronics, firmware/software, mechanical, and control engineers, technicians and technical professionals, providing both strategic oversight and hands-on technical guidance in an entrepreneurial/small company environment where you will also have the opportunity to contribute directly to the design of our next generation of motion control products. With a deep understanding of power electronics, embedded control systems, electro-mechanical system design, mechanical packaging, and manufacturing processes, the Director of Engineering will play a critical role in advancing Allient’s technology and product roadmap, ensuring that product development aligns with business objectives and customer needs. This position is part of the leadership team, actively contributing to company-wide strategic planning, business budget accountability, and financial decision-making in support of corporate goals. Apply now! Responsibilities: • Serve as a senior leader in strategic planning discussions, providing engineering insights that impact corporate decision-making and future growth initiatives., • Contribute to business budget planning, ensuring alignment between engineering investments, product development costs, and overall company financial objectives., • Lead and develop the engineering team, setting clear objectives, fostering innovation, and mentoring engineers to drive technical excellence., • Establish departmental standards, priorities, and output expectations, balancing strategic oversight and hands-on leadership., • Provide hands-on guidance to the team in the design, development, and testing of motion control products (e.g., servo drives), electro-mechanical subsystems (e.g., stages/actuators), and integrated solutions (e.g., UL-508 box build with Codesys application programming services) while ensuring manufacturability, reliability, and performance. Your expertise in power electronics and embedded systems design in motion control applications will be crucial in every step of the process., • Drive continuous improvement initiatives, optimizing engineering efficiency, product performance, and cost-effectiveness., • Oversee new product development and introduction (NPD/NPI), utilizing Stage-Gate methodology to ensure disciplined execution., • Assign and manage engineering project workflows, ensuring projects are completed on time, within budget, and meeting customer expectations., • Define and track engineering KPIs, including time-to-market, cost efficiency, and product/technology performance metrics., • Collaborate with sales, marketing, and manufacturing teams to align product development with customer requirements and market trends., • Serve as a subject matter expert in power electronics and embedded control systems engineering, providing guidance and individual contributions on design, simulation tools, and mechanical implementation., • Conduct detailed circuit design, simulation, and analysis to optimize product performance, including power and control/logic electronics., • Develop and implement innovative system- and component-level control algorithms for a variety of power electronics applications., • Evaluate circuit topologies and circuit components through simulation and analysis., • Develop detailed power and control electronics models to investigate and verify the algorithm’s robustness and performance across the entire operating space., • Support failure analysis, design verification, and manufacturing work instructions, ensuring a seamless transition from prototype to production., • Troubleshoot and resolve complex electrical, embedded software, mechanical, and system level issues in motion control systems and applications., • Develop and implement testing protocols to validate the functionality and reliability of designs., • Participate in engineering builds and full-rate production when necessary to validate designs and quality standards., • Provide cost estimates for new products and redesigns, factoring in engineering resources, labor, and materials., • Work closely with operations, quality, and supply chain teams to optimize manufacturing processes and supplier partnerships., • Develop risk management frameworks to proactively identify and mitigate risks in design, fabrication, and testing, • Actively contribute to customer and supplier engagements, supporting technical sales discussions and problem resolution., • Recruit, train, and mentor engineering team members, building a high-performing culture that values innovation, collaboration, and continuous improvement., • Lead succession planning and employee development initiatives to strengthen technical capabilities within the team., • Perform other duties as assigned. Minimum Qualifications: • Bachelor’s degree in Electrical Engineering, or a related field (Master’s preferred)., • 10-15 years of power electronics and embedded controls experience, with at least 5 years in a leadership role., • Strong knowledge of power and control electronics, embedded software, and electro-mechanical design principles applied in advanced industrial and medical applications., • Experience in hands-on leadership roles, combining direct application of subject matter expertise to product development initiatives with coaching, development and leadership of cross-functional teams., • Proven track record of designing and optimizing DC/DC converters, inverters, and switch-mode power supplies (SMPS)., • Strong understanding of thermal management, EMI/EMC compliance, and safety protocols for high-power systems., • Familiarity with PLCs, embedded controllers, motors, and electromechanical systems and applications., • Familiarity with FPGA design., • Proficiency in Microsoft Office Applications; primarily MS Excel, Word and Power Point., • Expertise in PLM systems (e.g., BlueStar) and engineering aspects of ERP systems (e.g., Microsoft Dynamics 365) to manage engineering changes, deviations, BOM structuring, etc., • Proficiency with design and simulation tools (e.g., Altium Designer, MATLAB/Simulink, SPICE, LTSpice)., • Experience with project management, product development and collaboration tools (e.g., Microsoft Project, Jira)., • Knowledge of industry standards (IEC, UL, CSA) and safety requirements. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job DescriptionDescription: WeTheHobby is a thriving sports entertainment company with global reach, headquartered in Rochester, NY. We value creativity, diversity, innovation, dedication, and our community! Our work environment includes: • Modern office setting, • Strong growth opportunities, • Flexible working hours, • Lively atmosphere, • A team that cares about one another, • Welcoming and inclusive culture WeTheHobby is looking for a skilled and solution-driven Senior Software Engineer to design, develop, and maintain the server-side logic, database architecture, and APIs that support our platforms. You will work closely with front-end developers, product managers, and other stakeholders to create scalable and secure systems that enhance our customer experience. This role is based out of our innovative sports card store in the Neighborhood of the Arts, Rochester, NY. Key Responsibilities: • Take ownership of the design, development, and maintenance of scalable and robust backend services., • Application design, including the authoring of design documents, flow charts, sequence diagrams, and other artifacts that make successful on-time delivery possible., • Create and optimize database schemas, queries, and models for performance and scalability., • Ensure applications are scalable, secure, and maintain high uptime for our growing user base., • Collaborate with cross-functional teams to gather requirements and translate them into technical solutions, ensuring alignment with business objectives., • Ensure the scalability, performance, and reliability of the applications you build., • Leading service/software implementation by contributing to the codebase, acting as an example of how to write testable, maintainable code which can adapt to the changing needs of our users., • Work on payment gateways, live streaming tools, and other third-party integrations to enhance platform functionality., • Maintain comprehensive technical documentation for internal and external use., • Work closely with front-end developers, designers, and stakeholders to integrate user-facing elements with server-side logic, • Participate in planning and strategy meetings to align technical solutions with business goals., • Ensuring the quality of the application development remains high through the application of best practices like automated testing, peer code reviews, and automated CI/CD pipelines., • Stay updated with the latest industry trends and technologies to bring innovative solutions to the team., • 5+ years of professional experience in backend development, • At least 2 of those years have been focused on designing, building, deploying, and maintaining DOTNET Applications, • 5+ years leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience, • Strong knowledge of database design, modeling, and optimization (both SQL and NoSQL), • Hands-on experience with AWS services Technical Skills: • Strong understanding of GraphQL, Rest, sockets, SignalR pub/sub and buses preferred., • Experience with enterprise software development platforms, Dotnet., • Knowledge of modern software development practices and tools (CI/CD, Git, Docker, etc.)., • Familiarity with modern frameworks, Express.js, Dotnet., • Knowledge of microservices architecture and best practices, event-driven architecture a plus, • Understanding of security best practices in software development, • Experience with eCommerce platforms or systems (e.g., BigCommerce, Square), • Familiarity with front-end frameworks (e.g., React.js) for better collaboration Soft Skills: • Excellent problem-solving skills and attention to detail, • Proven ability to work effectively in small teams with excellent communication skills., • Strong multitasking skills, capable of handling multiple projects simultaneously., • Eagerness to learn and adapt to new technologies and challenges, • Ability to work in a fast-paced environment and adapt to changing requirements. Education: • Bachelor's or Master’s degree in Computer Science, Engineering, or a related field. In accordance with applicable Federal and State laws, the anticipated salary range for this position based upon location in Rochester, NY and experience is $98,000 - $132,000 To comply with Federal law, WeTheHobby participates in E-Verify. All newly-hired employees are verified through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to confirm their identity and employment eligibility.

Job Description Tasks and Responsibilities: Conduct Inspections: Examine products and materials on the assembly line to ensure compliance with quality standards and specifications. Use Measurement Tools: Utilize tools such as calipers, gauges, and microscopes to measure product dimensions and verify tolerances. Document and report any defects or non-conformities discovered during inspection, and work with production staff to resolve any issues. Continuously monitor quality control procedures to identify opportunities for improvement, and make recommendations to management. Conduct periodic audits of production lines to ensure compliance with safety and quality standards. Collaborate with engineers, designers, and production staff to develop and implement new quality control procedures and testing protocols. Stay up-to-date on industry standards and regulations, and ensure that all quality control processes are in line with these guidelines. Train new employees on quality control procedures and expectations to ensure consistency in product quality. Participate in cross-functional teams to identify and troubleshoot quality issues, and work with other departments to implement solutions. Communicate with suppliers and vendors regarding quality control requirements, and help resolve any quality issues that arise throughout the supply chain. Develop and implement safety procedures, policies, and guidelines, and ensure that they are followed by all employees. Conduct regular safety inspections in the manufacturing facility, identifying any hazards or potential risks. Provide safety training and education for employees, including proper use of equipment and handling of hazardous materials. Investigate accidents and incidents, and create reports to identify root causes and preventative measures. Collaborate with relevant departments to ensure that safety regulations and requirements are met. Monitor and maintain safety equipment, such as fire extinguishers and safety goggles, ensuring that they are in good condition and accessible. Stay up-to-date with industry best practices, regulations, and developments, and make recommendations to management as needed. Conduct safety audits to evaluate the effectiveness of safety programs and identify areas for improvement. Act as a liaison between the manufacturing facility and regulatory agencies, ensuring that all compliance requirements are met. Maintain accurate records of safety-related data, including incidents, injuries, and safety equipment inspections.

Job Description Title Coating Technician I - C Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10pm - 6:30am. 10% Shift differential offered to C shift employees. Training will take place on A shift before transitioning to a C shift Schedule: Monday - Friday 6am - 2:30pm

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Entry level position that provides key support for the Quality Department including: water testing, raw milk testing, raw and pasteurized load out testing, Finished Product testing, microbiological testing, chemical titrations, and work-in-process testing. Employee is responsible for generating daily reports, data entry and collection, project assistance, filing, assist in conduct of special studies, calibrations, data collection, and communicating with other departments responsibilities: • Ability to operate lab testing instrumentation correctly. Testing includes moisture/solids, protein, fat and pH. Technician will be responsible for understanding microbiological plating, Foss analytical equipment, pH meter and other laboratory instrumentation as needed., • All instrumentation is to be operated in a safe, efficient, and sanitary manner., • Perform daily quality line audits, evaluations and testing on plant floor as assigned., • May be required to perform sensory evaluations on all finished products., • Fill out required laboratory data worksheets and logs in an accurate manner., • Maintain all results and reports in a confidential manner in accordance with the Company Letter of Confidentiality., • Responsible for maintaining a clean, orderly, and neat work area at all times., • Must keep area stocked with sufficient supplies to perform job responsibilities., • Computer skills including Microsoft Word and Excel., • Communication of results to the proper individuals in a timely, confidential, and professional manner., • Preparation of all solutions and media required in the performance of laboratory tests., • Recognize and notify Quality Assurance Manager and appropriate operations supervisors of any unusual results or product defects. Perform the necessary re-checks for analytical and microbiological test., • Report immediately to supervisor or manager of any damage, irregular activity, or unsafe conditions concerning the plant equipment or lab instrumentation., • Follow all safety, work, and Good Manufacturing Practices (GMP) and GLP's rules., • Conduct raw milk receiving and screening as needed., • Ensure verification of approved incoming raw milk producers., • May be required to be PMO certified for raw milk sampling and antibiotic residue screening., • Assists with state and federal screening inspections., • May be required to be certified in Phosphatase Testing., • College degree is highly preferred, but not required., • Minimum of (1) year experience in a laboratory setting is required., • College level verbal and written communication skills., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • 40-45 hours/sitting/standing/walking/lifting., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Quality Supervisor travel requirements: None exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$25.50—$29.50 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Elmira Stamping & Manufacturing - North is currently seeking a skilled Quality Technician to join our quality control team. As a Quality Technician, you will be integral to maintaining and improving our high standards by ensuring that products meet specific standards of quality and safety. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. This is for our Rochester, NY location. About Us: Elmira Stamping & Manufacturing has specialized in medium- to high-volume contract metal stamping, progressive die stamping, and CNC machining since 1970. Elmira Stamping & Manufacturing specializes in both deep-draw and progressive die stamping. We are equipped with man servo, high-speed, mechanical, and hydraulic stamping presses ranging from 30 to 400 tons. Our machines are optimized for automation with in-die contact and non-contact sensors. We are also experts in secondary put-and-take operations for parts that cannot be completed in a progressive die. Additionally, we have multiple 5-axis Emmegi XT extrusion milling centers with a bed capacity of 30 feet, plus turrets, lasers, and more. The foundation for everything we do and make at Elmira Stamping is an unwavering commitment to quality and customer satisfaction. Position Overview Responsibilities May Include: • Inspection & Approval: Inspect first and final parts and materials, accepting or rejecting them based on specifications., • Documentation: Record inspection results and test data accurately; document rework including issue identification, cause analysis, and corrective actions., • Communication: Discuss inspection outcomes with production teams and collaborate with the Quality Manager on daily tasks., • Quality Assurance: Assist in achieving QA compliance and targets; develop and maintain quality procedures and controls., • Supplier & Product Assessment: Evaluate product specifications and customer requirements, including those of suppliers., • Training & Reporting: Identify quality-related training needs and assist with technical and management system reports., • Data Monitoring: Gather and analyze performance data, producing relevant statistical reports., • Blueprint Reading: Interpret blueprints, technical documents, and manuals to ensure product quality., • Attention to Detail: Keen eye for detail and accuracy., • Technical Skills: Basic math and computer skills, ability to use specialized testing tools and machinery., • Physical Requirements: Ability to stand for extended periods and read technical documents and blueprints., • Wage, • This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $18.00 - $22.00 per hour. Elmira Stamping & Manufacturing provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance Elmira Stamping & Manufacturing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Shift: 7:45AM-5:30PM flexible What is a typical workday? Review documentation for products upon receipt, primarily First Article Inspections. Participates in supplier corrective and preventative actions, including: customer escapes, process nonconformities, supplier corrective actions, customer and change control, and material review board meetings. Description: Responsible for the identification and documentation of quality discrepancies related to assembly, process, mechanical, electrical, and electro-mechanical systems. Facilitates the implementation of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy and reliability of company products. Leads the preparation and execution of internal audits within established manufacturing and production controls to ensure compliance with internal and external specifications and standards. Liaises with auditing groups and inspectors to develop formal written reports, and recommend corrective actions. Identifies trends in discrepancies and collaborates with process owners on the refinement and optimization of business processes. Oversees testing department activities and work of inspectors. Reviews, approves, and controls work order flow tags. Develops inspection techniques, tools, and supplemental inspection instructions in support of standards, methods and procedures. Participates in supplier corrective and preventative actions, including: customer escapes, process nonconformities, supplier corrective actions, customer and change control, and material review board meetings. Intermediate professional with practical knowledge of job area. Works under moderate supervision to set objectives for own job area. Communicates with contacts inside and outside own team to explain and interpret operational processes, practices, and procedures Identifies and addresses changes within own job area. Works to achieve operational targets with some impact on departmental results. -Bachelor’s degree in Industrial and Systems Engineering, Electrical Engineering, Mechanical Engineering, Materials Engineering, Materials Science Engineering or related field. Requires advanced job knowledge/skills. Excellent communication, technical writing and presentation skills. Nice to have: -Knowledge and/or experience with Microsoft Tool Suite •Experience in development of manufacturing work instructions •Knowledge and/or experience with ISO9001/AS9100 •Knowledge and/or experience with Agile Product Lifecycle Management (PLM) or similar PLM tool.

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product introduction (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Production Supervisor PRIMARY FUNCTION: The Production Supervisor is responsible for leading and overseeing the assembly teams to ensure efficient and effective operations. This role involves coordinating all aspects of material processing and product assembly, either directly or through team members. Key responsibilities include setting work priorities, providing technical guidance, conducting analysis, and supporting both manufacturing and customer needs. ESSENTIAL FUNCTIONS: • Lead a team of direct reports to meet operational goals and performance targets., • Oversee daily production activities, setting priorities that align with cost efficiency and operational effectiveness., • Inspire, coach, and develop team members; actively participate in the recruitment and selection process for new hires., • Assess team performance to support decisions related to promotions, transfers, disciplinary actions, and terminations., • Drive continuous improvement initiatives focused on enhancing efficiency, product quality, and profitability., • Support the development and execution of training programs, encouraging cross-training to build team versatility., • Champion a culture of quality, safety, and continuous improvement across assembly value streams., • Coordinate manufacturing schedules and priorities to ensure timely delivery of customer orders., • Identify capacity needs and temporary gaps and develop plans to meet our customer demand, • Integrate Environmental, Health, and Safety (EHS) practices into daily operations., • Establish and maintain standard operating procedures, ensuring team compliance through observation and feedback., • Manage production schedules to meet product specifications and quality standards., • Analyze production and operational reports to identify trends, resolve issues, and minimize costs and delays., • Collaborate with engineering during the New Product Introduction (NPI) phase, offering input on manufacturability and testing to meet delivery timelines., • Work with peers and supervisors to determine key goals, track progress through metrics, and adjust plans as needed., • Coordinates and assists with business initiatives, participating in teams to drive best practice across the organization including but not limited to understanding, supporting, promoting, and improving the processes that are followed in PEKO’s quality assurance initiatives and Environmental, Health and Safety, • Bachelor’s degree from an accredited institution, • Minimum of two (2) years of experience in operations and/or in a manufacturing or lean environment, • Minimum one (1) year of leadership experience managing people or a project teamPreferred Qualifications:, • Bachelor’s degree in engineering, Business or other related fields, or equivalent, • 3+ years of experience in operations or manufacturing or lean environment is a plus, • Knowledge of basic manufacturing processes (safety, environmental, and assembly), • Ability to read and interpret schematics and blueprints, • Knowledge of Lean Manufacturing methodology and Continuous Improvement, • Strong communication, interpersonal and written skills, • Must be able to establish priorities and balance multiple objectives, • Computer Skills: demonstrated proficiency in all Microsoft Office applications, familiarity with MRP systemsWork Authorization:, • US Persons, • Must be able to work in the United States without corporate sponsorship now and within the futurePEKO Perks:, • Competitive Total Rewards, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care for our talented and loyal PEKO family., • Safety: A commitment to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to a financially prudent organization. Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR KvbFbjlkZy

Job Description Akkodis currently has a Software Developer position with a client located in Rochester, NY. This is a hybrid position, so the person needs to live within 40 miles of Rochester, NY. No C2C or agencies allowed with this position. Rate Range: $40.00/hour to $45.00/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Software Developer interested in focusing efforts in a Test Automation environment. This is a full stack/agile environment with WebUI, Mobile App UI, API, Database applications with a particular emphasis on the Mobile App testing. Need solid JavaScript, Node.js, Java skills and Python as an option. Someonecurious, who wants to learn, is very thorough in their approach and has great attention to detail. Responsibilities · Develop and maintain a test automation framework that will be used by agile team members to design, build, and run automated test suites against all application layers (Web UI, Mobile Native App UI, API, Database). · Complete UI and Backend development tasks in Node.js, utilizing Mongo DB. · Integrate open-source and licensed test tools into the Automation Framework solution. · Perform unit-testing and integration testing of Automation Framework components. · Enable integration of the automated test suites within the CI/CD pipeline. · Contribute to the design and maintenance of an automated test execution environment, using both physical and virtual machines and devices. · Support the execution of load and performance test strategies through the automation framework where possible. · Research and implement AI tools to optimize the Software Quality and Test Automation processes. · Support innovation in test automation by staying current with new technologies and frameworks. Required Skills/Education · Five or more years’ experience building test automation frameworks. · Strong knowledge of QA methodologies and tools. · Experience working on an Agile Team. · Experience with front-end development (HTML, CSS, jQuery). · JavaScript and Node.js experience or demonstrated transferable skills. · Experience incorporating test automation into the CI/CD pipeline. · Knowledge of networking services and common networking protocols. · Familiarity with use of AI tools in the QA process. · Passionate about quality, highly motivated, and collaborative. · Demonstrated ability to learn new technologies. · Experience with Azure DevOps, Test Manager, and Visual Studio, or other similar tools. If you are interested in this Software Developer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Jim Tobin at mailto:"> Equal Opportunity Employer/Veterans/Disabled Pay Details: $40.00 to $45.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Title Coating Technician I - B Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The Coating Technician plays a vital role in the production of high-quality precision optics by applying thin-film coatings to a multitude of different lenses and components. Using specialized vacuum deposition equipment, the technician ensures coatings meet strict performance and durability standards essential for optical clarity and functionality. This position requires careful attention to detail, consistency in process execution and a strong commitment to quality in our manufacturing environment. In addition to coating product, this position will support coating operations to include but may not be limited to; equipment maintenance and preventive maintenance, testing, failure analysis, process development, tooling design, and scheduling. You Will: • Prepare precision optical components for coating by cleaning, masking and inspecting for defects., • Operate and maintain vacuum deposition systems (e.g. e-beam, sputtering, thermal evaporation), • Monitor coating processes and parameters to ensure optimal film performance and uniformity., • Inspect coated optics using spectrophotometers, interferometers and microscopes., • Record process data, quality control metrics and maintenance logs with a strong attention to detail., • Troubleshoot and resolve issues with equipment or coating quality., • Collaborate with engineers and management staff to refine coating processes., • Maintain a clean, organized and safe work environment in accordance with ISO and cleanroom standards., • Measure optical spectra, prepare samples for environmental testing, and provide required data to QA personnel., • Keep accurate and complete coating records, • Daily coater cleanup and perform/ assist during routine large-scale cleanup., • Maintain equipment, tooling, adaptors and work area in accordance with Good Manufacturing Practices, ISO and HSE protocols., • Train Coating associates on job-specific tasks as well as mentoring in the area of coating, testing and spectral measurements., • Work closely with the Coating Manager to understand current capabilities and work toward strategic capability improvements., • Work closely with other functional areas at RPO to improve the flow and quality of components to Coating. You Have: • High School Diploma/GED Required; Associate degree or technical certification in optics, materials science or a related field a plus!, • 1-3 years of experience in optical coating or thin-film technology in a precision manufacturing environment., • Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management., • Strong mechanical aptitude and familiarity with vacuum or precision manufacturing equipment. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2pm - 10:30pm. 5% Shift differential offered to B shift employees. Training will take place on A shift before transitioning to a B shift Schedule: Monday - Friday 6am - 2:30pm Compensation details: 20-26 Hourly Wage PI59bc98e6e823-25405-38685777

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: Entry level position that provides key support for the Quality Department including: water testing, raw milk testing, raw and pasteurized load out testing, Finished Product testing, microbiological testing, chemical titrations, and work-in-process testing. Employee is responsible for generating daily reports, data entry and collection, project assistance, filing, assist in conduct of special studies, calibrations, data collection, and communicating with other departments responsibilities: • Ability to operate lab testing instrumentation correctly. Testing includes moisture/solids, protein, fat and pH. Technician will be responsible for understanding microbiological plating, Foss analytical equipment, pH meter and other laboratory instrumentation as needed., • All instrumentation is to be operated in a safe, efficient, and sanitary manner., • Perform daily quality line audits, evaluations and testing on plant floor as assigned., • May be required to perform sensory evaluations on all finished products., • Fill out required laboratory data worksheets and logs in an accurate manner., • Maintain all results and reports in a confidential manner in accordance with the Company Letter of Confidentiality., • Responsible for maintaining a clean, orderly, and neat work area at all times., • Must keep area stocked with sufficient supplies to perform job responsibilities., • Computer skills including Microsoft Word and Excel., • Communication of results to the proper individuals in a timely, confidential, and professional manner., • Preparation of all solutions and media required in the performance of laboratory tests., • Recognize and notify Quality Assurance Manager and appropriate operations supervisors of any unusual results or product defects. Perform the necessary re-checks for analytical and microbiological test., • Report immediately to supervisor or manager of any damage, irregular activity, or unsafe conditions concerning the plant equipment or lab instrumentation., • Follow all safety, work, and Good Manufacturing Practices (GMP) and GLP's rules., • Conduct raw milk receiving and screening as needed., • Ensure verification of approved incoming raw milk producers., • May be required to be PMO certified for raw milk sampling and antibiotic residue screening., • Assists with state and federal screening inspections., • May be required to be certified in Phosphatase Testing., • College degree is highly preferred, but not required., • Minimum of (1) year experience in a laboratory setting is required., • College level verbal and written communication skills., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • 40-45 hours/sitting/standing/walking/lifting., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Quality Supervisor travel requirements: None exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$25.50—$29.50 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job Description Systems Administrator / Application Administrator job in Western, NY: Contract to Hire Role, this induvial will need to be within driving distance of Rochester, NY and available as needed onsite. Please no 3rd party or c2c candidates Hourly Pay Rate Range: $45.00- 55.00 per hour based on experience, education, geographic location and other factors. The Systems Administrator / Application Administrator Leads the building, maintaining, monitoring and auditing of on-premise application installations, including but not limited to, ensuring security standards are applied, troubleshooting, developing new solutions and leading projects to upgrade components or whole systems. Responsibilities of the Systems Administrator / Application Administrator job in Western, NY: * Understand application, database, server or security requirements and translates technical or systems specifications for implementation. * Completes assigned application administration deliverables and leads teams in the completion of their assigned deliverables, including the configuration of applications, database, server or security settings and features. * Develops technical documentation to be used by application administration development or support teams. * Leads and/or actively participates in testing of newly developed applications, integrations, systems, solutions and upgrades of applications or application support tools. * Leads and/or works closely with technical resources, and in some cases functional/business analysts, to prepare test plans, test data and complete integrated testing. * Actively participates in smaller systems projects or enhancements, ensuring delivery of assigned application administration tasks in alignment with project plans * Other duties as assigned. Desired Knowledge Experience of the Systems Administrator / Application Administrator job in Western, NY: * Bachelor's degree preferred Or equivalent combination of education and experience * Experience with interface, networking, design, and relational database technologies preferred * Experience with Wintel based products and hardware. * Experience with authentication and authorization methods such as Shibboleth, LDAP and Active Directory preferred * Experience supporting Cloud and on premises applications preferred * Experience with multi-tier applications employing application and web servers preferred * Experience with project management from planning through implementation preferred * Excellent verbal and written communications skills required * Ability to work both independently and as part of a team required * Ability to participate in on-call rotations required * Ability to learn new technologies quickly and help team members embrace technology change preferred * Proven track record executing multiple work streams and producing consistent results preferred * Strong understanding of system/application administration activities preferred * Oracle, MySQL, MS SQL or related database experience preferred * Solid understanding of Web Server, App Server and/or Database interactivities preferred * Solid understanding of application infrastructure and architecture preferred For more information or to be considered for the Systems Administrator / Application Administrator job in Western, NY please contact Thomas McCarthy at mailto:"> Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit " target="_blank">. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance Pay Details: $45.00 to $55.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description AVI Foodsystems is looking for a friendly and hard-working team member to fill the role of Service Route Driver. Founded in 1960, AVI Foodsystems has evolved into one of the most respected and trusted food service companies in the nation. Providing comprehensive food services with a focus on the highest quality and freshest ingredients, impeccable service and total value is the reputation we have earned and live up to everyday. Duties & Responsibilities: • Ensure company vehicle is properly loaded with all product needed to service locations, • Drive vehicle to transport products and food to client locations, • Deliver, load, and unload products and food as requested, • Place stock on shelves or racks in vending machines or coolers, • Ensure the refrigeration of all cold food products in truck and at accounts, • Oversee the ordering of merchandise and control inventory, • Collect unsold and stale merchandise, • Collect money, including coins and bills, from machines, • Communicate positively with customers by making eye contact and smiling, • Perform routine maintenance and sanitation of machines at accounts, • Must be 21 years of age or older to operate a company vehicle, • Valid driver’s license (a CDL is NOT required) and a good driving record, • Ability to pass the DOT Physical, • Ability to lift up to 50 pounds, • Outgoing personality with the skills to promote products, • Excellent organization and time management skills, • Ability to communicate effectively to customers and AVI team members, • A family culture and atmosphere, • Competitive compensation, • Health, dental, vision, and life insurance for full-time team members, • 401(k) with generous company match, • Paid vacations and holidays

Job Description Job Title: Mechanical Design Engineer Reports To: Optics/Systems Engineering Manager Grade: 12 Summary We are seeking an experienced and innovative Mechanical Design Engineer to join our engineering team at a senior level. The successful candidate will lead the design, development, and testing of advanced mechanical components and systems, with a strong emphasis on research, development, and cross-disciplinary collaboration. This role requires demonstrated expertise in product development, project leadership, and the ability to mentor junior engineers, while working closely with manufacturing and quality teams to ensure designs meet performance, cost, and manufacturing objectives. Essential Duties and Responsibilities: • Lead complex analytical work in machine design, dynamics, fluid mechanics, and magnetics., • Oversee and create detailed mechanical designs using Creo CAD software; guide prototype development and ensure designs meet advanced functional, performance, and cost requirements., • Drive precision engineering initiatives, including flexure design, kinematic repeatability, optical mounting, and thermal management., • Identify and implement improvements to existing products by analyzing performance and reliability, incorporating feedback from production, customer service, and field data., • Conduct and supervise simulations, stress analysis, and physical testing to verify design performance; ensure compliance with relevant standards and regulations., • Manage and run test stands and machines, conduct experiments, and build engineering prototypes; oversee the execution of new product development prototype experiments for mechanical/electrical/thermal/fluid systems., • Utilize and train others on sophisticated metrology equipment, including laser position measurement, ball-bar motion equipment, rotation measurement, temperature, fluid flow, and pressure measurement devices., • Write and review concise test reports with justifiable conclusions and recommendations; present findings to cross-functional teams and leadership., • Collaborate with external suppliers and vendors to ensure materials and components meet required specifications; lead supplier development initiatives as needed., • Foster frequent communication and open brainstorming with team members; mentor junior engineers and interns., • Focus on research and development: Lead innovative research to develop new technologies and improve existing products. Collaborate with cross-functional teams to explore new ideas and methodologies. Drive R&D projects to advance technological capabilities and maintain a competitive edge in the industry. Education and/or Experience – Minimum B.S. in Mechanical Engineering or Technology with 7+ years of relevant work experience (MS or PhD preferred); or equivalent combination of education and experience. • Advanced familiarity with motion systems as related to mechanical design., • Advanced understanding of mechanical systems, materials science, and manufacturing processes., • Demonstrated expertise with measurement tools, data acquisition systems, and sensors., • Proven experience with Geometrical Dimensioning and Tolerancing methods; Six Sigma certification preferred. Technical – • Strong technology perspective, particularly related to the manufacture of complex machinery (e.g., CNC machines, machine motion, etc.)., • Expertise in tolerance analysis, stress analysis, FEA (Finite Element Analysis), and thermal management techniques., • Experience leading projects and mentoring junior engineers. Salary Range: $80,000-$115,000. The salary offered will be determined by the candidate's education, experience and other qualifications, considering internal equity among current employees with similar skills and experience. QED is an Equal Opportunity Employer

Job DescriptionSalary: $18-$22/ Per Hour We're looking for talented Interns to join our team for the Fall 2026 Semester! As an Engineering Intern, you will be working with our global R&D team on our Timing and Synchronization Products. We're looking for Interns enrolled in a four-year or post-graduate degree program in the following or related fields: Electrical Engineering Computer Engineering Computer Science Mechanical Engineering Signal Processing Radio Communications What youll be doing: • Working closely with our Engineering Team, you will be designing, developing, and enhancing product features on the latest GPS-based and alternative PNT time synchronization equipment and software., • Coding software in our embedded Linux stack using languages such as C, PHP, python, HDL, golang (per your experience), • Testing new products, new features and software releases to ensure our products meet the highest standards and specifications., • Devising test procedures, experiments, test fixtures and software; performing those tests, analyzing the results and generating comprehensive test reports and recommendations., • Analyzing and debugging problem reports and designing fixes, • Working in a global multi-discipline, multi-cultural environment with cross-functional teams toward a common design goal. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Insero Talent Solutions is recruiting a Software Engineering Manager for an electrical manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Manage and contribute to software development projects for a small team of engineers. RESPONSIBILITIES: Collaboration: Work with management, marketing, business line managers, electrical engineers, and the production department on product definition, requirements, development, and support. Serve as the interface between software and hardware engineers. Report on product status and project activities to management. Project Planning: Define project scope and direct the software and firmware projects for embedded, desktop and server-based applications. Determine strategies for bringing projects to completion on schedule. Design test methods. Team Leadership: Provide support to the development team as well as constructive feedback and positive motivation. Review the expectations for team members and provide guidance, mentoring, and technical leadership. Resource Management: Oversee the allocation of team resources and prioritize tasks. Risk Management: Identify potential risks, develop contingency plans, and manage changes in project scope or direction. Organization: Ensure team members are following best practices for source control, issue tracking, documentation, and testing. Oversee the use of version control and issue-reporting tools. Software Creation: Support projects as an individual contributor by developing and testing code and creating supporting documentation. User Support: Ensure that developed software meets performance specifications and requirements. Resolve any user issues. QUALIFICATIONS: • Bachelor's Degree in Computer Engineering, Computer Science, or a related technical field., • At least five (5) years programming experience with C/C++ and C# at an individual contributor level., • At least three (3) years of experience in software project management., • General knowledge of commonly used hardware technologies such as USB, Ethernet, I2C, and Serial Ports., • Experience with creating software for direct real-time control of electronic hardware via direct digital control signals of integrated circuits., • Experience in developing embedded code with multi-threading, inter-process communications, and interrupt handlers., • Experience with Microsoft Azure DevOps., • Experience with Windows and Linux application development.

Job DescriptionCompany Description BCC Software is the leading postal and presort software solutions provider. With over 45 years of industry experience, we are dedicated to ensuring that all of our software products and marketing solutions are always ahead of the curve and compliant with the latest USPS® regulations. Job Description BCC Software is seeking a skilled Software Engineer with a strong background in C++/C who excels at solving complex technical challenges in an Agile environment. This role focuses on developing and enhancing both well-established applications and new software solutions that support the company’s evolving product offerings. Essential Functions • Develop and maintain software solutions by:, • Estimating and sizing user stories, • Writing, reviewing, and testing code (including unit tests), • Documenting and collaborating on all assigned Sprint activities, • Meeting both individual and team commitments, • Consistently delivering results within an Agile SCRUM framework, • Partner with Product Owners to review requirements, define acceptance criteria, and plan user stories, epics, and projects, • Contribute meaningfully within the assigned team and across the broader Engineering organization on multi-team or cross-regional initiatives, • Take ownership of problems—not just tasksQualifications, • Minimum of 7 years of software development experience using C++/C, • Hands-on experience with automated unit testing and function mocking frameworks, • Proficiency in both Linux and Windows application development, • Strong understanding of software engineering tools, including source control, compilers, linkers, debuggers, and performance profiling tools, • Working knowledge of database concepts (relational, document-based, or text-based), • Familiarity with application security principles and their practical implementation, • Experience with modern CI/CD pipelines and Gitflow workflows, • Strong verbal, written, and interpersonal communication skills, • Analytical, detail-oriented, and methodical approach to problem-solving Additional Information AAP/EEO Statement BCC Software provides equal employment opportunity to all individuals regardless of age, race, color, creed, religion, ancestry, sex (including pregnancy, childbirth or related medical conditions), gender, sexual orientation, gender identity or expression (including transgender status), national origin, veteran or military status, marital status, genetic information, physical or mental disability, familial status, reproductive health decisions, status as a victim of domestic violence, or any other basis protected by applicable laws and regulations. Further, the company takes affirmative action to ensure that applicants are employed, and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated. Salary: $115,000 - 120,000 This position is hybrid and must be able to work at our Rochester, NY office,

Job DescriptionDescription: Job Title: Principal Optical Engineer Department: R&D – Optical Reports To: VP of Advanced Optics Work Location: Onsite-Hybrid Salary Range: $100,000 - $140,000 FLSA Status: Exempt Featured Benefits: Medical, Dental, Vision, 401(k), FSA/HSA, Patent Incentives, Tuition Assistance, PTO, Life & Long-Term Disability Insurance, and more. About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacture and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer a portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Principal Optical Engineer will support R&D, new product development and production while directly reporting to the R&D/Optics group. It will be their responsibility to work within multidisciplinary teams to design, build and test optical mounting structures, alignment mechanisms and housings. They will be solely responsible for all reliability modelling and testing with respect to optical components and assemblies. This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Oversee test lab and provide optical engineering expertise., • Establish test procedures, processes, and documentation., • Review and organize test data., • Subject expert for geometric optics, LED illuminators, backlights, conventional micro-displays, collimators and concentrators, holographic systems, optical interference coatings, injection molding, lens design, and high precision optics design, fabrication and assembly., • Research and understand human factors and implement intelligent design choices for head mounted display systems., • Generate complete system documentation and provide input to technical proposals to effectively communicate designs and/or approaches to internal and external customers., • Validate system performance to prove the technical design through analysis, simulation, and laboratory testing., • Ensure proper procedures and methods are used by other members of the design team by providing a value-added quality review., • Independently develop and implement corrective action to product and procedural problems., • Communicate with the customer suppliers, and internal management as the technical expert on projects to effectively interface with all facets of decision-making personnel and customer management. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum of 8 years of detailed experience working in a product design environment., • Strong organizational, time management, and leadership skills; and the ability to successfully manage multiple tasks in a dynamic environment., • Familiarity with MS Project., • Familiarity with optical measurement techniques., • Must be able to demonstrate out-of-box thinking for unique problems and develop concepts into products., • Master’s degree in Optical Engineering, Physics or equivalent., • Familiarity with sequential and non-sequential programs like Zemax, Code V, etc. Travel: Travel including international travel up to 25%, if possible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job DescriptionJob Description As an Engineering Team Leader, you will have team and technical leadership responsibilities. As part of a high performing team, you will deliver effective and fit for purpose solutions to our customers globally, whilst ensuring best practice is adhered to. You will be responsible for all or aspects of the development of unique customer solutions to meet specific applications, including: • Management responsibility for your team, • Combining standard Rotork products to develop solutions for unique customer applications, • Specification review and generation of submittal documentation, • Solving problems with new technology introduction, • Influencing, promoting and adhering to design principles using best practice processes, • Collaborating with key project and business stakeholders Main Responsibilities: • Technical leadership for your specific domain of competence ensuring best practice is set and adhered to., • Day to day team management responsibility including setting objectives, task allocation and technical guidance., • Fulfil requirements of the full applications project life cycle from specification review and concept through to final manufacture. Design, implement and test., • Develop and prepare project plans to influence project timescales., • Technical authority in design reviews to ensure that Rotork designs and solutions comply with specifications and relevant standards., • Influence stakeholder specifications, ownership for system requirements., • Develop and provide cost estimates in collaboration with all business disciplines., • Present analysis results and project solutions to key stakeholders such as senior leaders and customers as necessary., • Develop and execute functional and non-functional test specifications to ensure compliance to customer requirements. Qualifications • Bachelor’s Degree in Mechanical, Electrical, Product design or Industrial Engineering or equivalent experience., • Demonstrable problem solving using a variety of techniques., • Previous industrial design experience., • Proven experience of analyzing, designing, testing, debugging and enhancing existing/new products used in an industrial environment., • Understanding of a variety of project management methodologies (e.g. agile)., • Design and development using structured design techniques., • Use of the Microsoft toolset - for technical documentation., • Experience of task management, defect management, requirements capture, verification and validation tools., • Ability to be able to effectively manage, mentor and coach the team., • Track record of being able to influence technical professionals and projects., • Clear and effective communication skills, able to build relationships at all levels of the organization., • Excellent written and verbal communication skills., • A team player that shares knowledge and insights, but also able to demonstrate a strong level of initiative., • Solid understanding of information processing fundamentals and best practices., • Can effectively communicate technical information with a non-technical audience when required., • Adapts style to contribute and enhance overall team performance., • Works effectively with people across a wide range of disciplines and levels (both internal and external resources). #LI-Hybrid #HP Additional Information Rotork is the market-leading global flow control and instrumentation company, helping our customers manage the flow or liquids, gases and powders across many industries worldwide. Our purpose is Keeping the World Flowing for Future Generations. For over sixty years, the world has relied on us to create the things that keep everything moving. From oil and gas to water and shipping, pharmaceuticals and food- these are the flows on which our modern world depends. Today we're respected and admired for our people, performance and products. Our success flows from our commitment to engineering excellence, and that's what we will always pursue, safely and sustainably. Rotork is going through an exciting period of change and growth, building on our existing market success. It's a great time to join us and make an impact in shaping the future of our business.

Job Description Job Title: Quality Control Technician Job Type: Full-time Reports to: Quality Manager Job Summary: The Quality Control Technician is responsible for inspecting and testing products to ensure they meet quality standards and specifications throughout the manufacturing process. This role involves conducting tests, recording results, and collaborating with production teams to implement corrective actions when necessary. The ideal candidate will have strong attention to detail, a solid understanding of quality control principles, and the ability to work in a fast-paced manufacturing environment. Key Responsibilities: • Inspection and Testing:, • Conduct inspections and tests on raw materials, in-process components, and finished products to ensure compliance with quality standards., • Utilize precision measuring instruments (e.g., calipers, micrometers, gauges) and testing equipment to evaluate product specifications and performance., • Identify and document defects or deviations from specifications and communicate findings to the quality control supervisor and relevant departments., • Documentation and Reporting:, • Maintain accurate records of inspection results, test data, and quality control activities., • Prepare reports summarizing findings, trends, and recommendations for improvement., • Assist in the development and maintenance of quality control procedures and protocols., • Collaboration and Communication:, • Work closely with production teams to ensure adherence to quality standards and implement corrective actions when necessary, • Participate in team meetings to discuss quality issues, performance metrics, and continuous improvement initiatives., • Train production personnel on quality control standards and best practices as needed., • Continuous Improvement:, • Assist in root cause analysis and problem-solving efforts to identify and address quality issues., • Collaborate on quality improvement projects to enhance product quality and reduce defects., • Stay updated on industry trends and advancements in quality control methodologies., • Compliance and Safety:, • Follow all safety protocols and guidelines while performing inspections and tests., • Education:, • High school diploma or equivalent required., • Technical or vocational training in quality control, manufacturing, or a related field is preferred., • Experience:, • 1-3 years of experience in quality control or assurance, preferably in a manufacturing environment., • Familiarity with quality control tools and methodologies, such as Six Sigma or ISO standards, is a plus., • Skills:, • Strong attention to detail and analytical skills., • Excellent problem-solving abilities and critical thinking., • Good communication and interpersonal skills for collaboration with team members., • Ability to stand for long periods and perform repetitive tasks., • Ability to lift and carry materials weighing up to 50 lbs., • Experience with inspection and testing equipment specific to the industry., • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays

Eastman Kodak Company is looking for a Coating and Product Quality Engineer to join our Wide Roll Film Manufacturing division located at the Eastman Business Park in Rochester, NY. The principle responsibilities for this position are to provide excellence in (1) day-to-day manufacturing support (quality, troubleshooting, and testing) of current sensitized photographic products, (2) owning the process conditions/procedures necessary to coat film, (3) film physical quality/uniformity improvements, (4) interface with upstream and downstream departments as film and materials move from one operation to another and, (5) participate in multidisciplinary teams on new product development initiatives. This position is responsible for the coating machine conditions required to make photographic film and the resulting physical quality. The position suits a person who can both see the big picture and is interested in the detail of how things happen. The person who thrives in this position will enjoy using both technical background and people skills to make improvements and solve problems. Job Requirements: • Product assessment and improvement of both physical quality and performance opportunities (yield improvements, waste reductions, etc)., • Work with process engineers to determine the process conditions that result in optimum film performance; areas include coating, web conveyance, unwinding/winding, roll handling, electrostatics, quality inspection and reporting, data transfer from operation to operation., • Product development and accreditation of new business opportunities or features., • Participation on multidiscipline teams (business unit representatives, process engineers, synthetic chemists, manufacturing operations staff) to achieve divisional goal. Skills Required: • Demonstrated ability (through work experience or academic/internship/co-op) to utilize engineering skills across multiple concurrently active projects., • A strong work ethic, high motivation, multitasking and ability to be mentored., • Demonstrated aptitude to plan, organize, schedule, and direct projects and tasks and adapt to changing conditions., • Demonstrated aptitude for trouble-shooting issues and assist in root-cause analysis techniques., • Strong interest in hands-on experience with multi-disciplinary teams., • Good written and verbal communication skills. Minimum education level and experience: • Bachelor of Science Degree in Mechanical or Chemical Engineering within the last 2-5 years.

Job DescriptionResponsibilities: • Must be able to read engineering technical drawings and use basic hand tools like digital calipers, etc., • Conduct quality control inspections throughout the production process, including first-article, in-process, and final pre-shipment inspections, • Perform visual (workmanship) evaluations and functional testing as applicable (measurements, assembly, etc.), • Verify packaging and labeling for accuracy and compliance, • Serve as an on-site third-party Quality Engineering Inspector, • Visually inspect and record all weld components of each product, • Manage and oversee additional inspectors assigned to your site, • Conduct technical sorts and/or rework as required by client specifications, • Provide timely, detailed inspection reports with photographic evidence of products, packaging, labeling, and any defects found, • Submit daily and weekly reports using Microsoft Word or Excel Skills & Experience Requirements: • Minimum of 3 years of experience in a quality-related position, • QC Engineer with an Electrical Inspection background is preferred, • Strong visual inspection skills, especially for weld components, • Ability to work independently with minimal supervision, • Familiarity with and adherence to ProQC and client site safety and operational guidelines, • Strong communication skills

Job DescriptionDescription: About WeTheHobby WeTheHobby is a fast-growing sports entertainment company bringing fans together through live-streamed breaks, eCommerce, and real-time community experiences. Headquartered in Rochester, NY, we’re building platforms that connect collectors and fans worldwide. We value creativity, innovation, and collaboration—and we’re looking for leaders who want to shape the future of sports entertainment technology. The Role We’re seeking a Software Engineering Manager to lead our development team and drive the technical direction of our platforms. In this role, you’ll focus on managing people, shaping architecture, and ensuring delivery. You will not be coding day-to-day, but you will guide technical strategy, review design decisions, and make sure the engineering team is building scalable, reliable systems. This is a high-visibility role with responsibility for both engineering outcomes and team growth. What You’ll Do • Lead & Mentor – Manage, coach, and support a team of software engineers, helping them grow both technically and professionally, • Architectural Oversight – Set high-level technical direction, review system designs, and ensure scalability, performance, and reliability, • Code Quality – Review code at a design/architecture level to ensure alignment with standards (without direct coding responsibilities), • Drive Delivery – Oversee execution of projects and ensure timely delivery of backend and frontend initiatives, • Foster Collaboration – Partner with product, design, and business stakeholders to align engineering output with company goals, • Ensure Best Practices – Champion agile workflows, CI/CD pipelines, automated testing, and security standards, • Recruit & Grow – Help attract, hire, and retain top engineering talent as the team expands Requirements: What We’re Looking For Must-Haves • 7+ years of professional software engineering experience, with at least 2+ years in an engineering management role, • Strong technical foundation in backend systems architecture (preferably .NET), • Proven experience leading teams and making architectural decisions, • Familiarity with cloud platforms (AWS or similar) and modern software development practices, • Excellent communication skills with the ability to bridge technical and business contexts Nice-to-Haves • Experience managing teams building real-time, event-driven, or streaming platforms, • Familiarity with eCommerce, payments, or large-scale transactional systems, • Previous experience scaling teams from small to mid-sized organizations, • Interest in sports, collectibles, or fan-driven communities.

Job DescriptionQuality Technician Job Description This position is responsible for monitoring the food safety and quality of products and services to ensure they meet all customer and regulatory standards by utilizing quality tools and systems application. Responsibilities • Perform all required product and batch inspection responsibilities., • Maintain work areas and equipment within GMP and GLP standards., • Place non-conforming raw materials, packaging, and finished products on hold as required., • Perform required analytical and microbiological testing as defined by Food Safety and Quality systems., • Verify product codes and chart recorders., • Perform microbiological activities including but not limited to ATP swabs, culture swabs, plating, BacT/Alert3D, and 3M film plating as required by the facility., • Monitor thermal process checks including pasteurizer temperatures and packaging sterilization processes., • Participate in GMP, GLP, Food Safety, and Food Quality programs., • Ensure measurement accuracy by keeping lab equipment in calibration and in operating order through preventative maintenance and troubleshooting., • Perform analytical testing on products, water, raw materials, ingredients, packaging, etc., • Analyze, interpret, and utilize statistical process control data to make informed decisions., • Perform 24-hour sensory evaluation of products in the lab., • Participate in internal inspections and audits., • Maintain accurate paperwork and records to meet all government and company requirements, both physical and electronic., • Communicate quality, food safety, and compliance concerns immediately for prompt resolution., • Communicate quality results and collaborate with cross-functional departments to resolve issues timely., • Collect samples for retention and customer use., • High School Diploma or GED., • Ability to wear personal protective equipment such as a bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses, and leather skid-resistant work shoes/boots., • Ability to apply intermediate computer and communication skills, math functions, and reasoning., • Ability to use tools/gauges such as refractometer, salt titrator, acid titrator, PH meter, color meter, moisture meter, and consistometer. The work environment involves extended standing and frequent moving by foot. There is exposure to extreme loud noises and extreme hot/cold (non-weather) environments. The role requires lifting/carrying less than 30 pounds, reaching, and use of fingers. The position may involve working in high places and near moving mechanical parts, frequent reaching/pulling/bending/climbing stairs/stooping/kneeling/bending, and frequent lifting of over 30 pounds or pushing 80 pounds on a cart. There is potential exposure to caustic substances. Job Type & Location This is a Permanent position based out of Rochester, New York. Pay and Benefits The pay range for this position is $45552.00 - $47632.00/yr. Company Benefits Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 20, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Staff Instrument Reliability Verification and Validation Engineer Location: Rochester, NY Full-Time Employment with CLIENT Hybrid Work (4 days on-site) w/ one day remote (flexible on which day) Job Description : Candidates Must sit in Rochester, NY (4 days on-site) w/ one day remote (flexible on which day) - Candidates ideally have led and/or management experience – being able to work cross functionally is important. The Role: As we continue to grow as clients, we are seeking a Staff Instrument Reliability Verification and Validation Engineer to help with formal verification and validation of complex medical devices under the regulations of the FDA. The individual will lead and be part of an engineering team that is responsible for requirements-based manual test case design and execution of test procedures in a BL2 lab environment. The team is highly collaborative and will require regular interactions in formal reviews, test planning activities, and working with software development and partners to reproduce and verify system defects. The Responsibilities: • Manage two separate Teams, oversee reliability and V&V planning, resourcing, and schedules to ensure on-time completion of milestones, • Drives design control efforts, including writing instrument design control documentation and reviewing as necessary (Plans, Protocols & Reports) to ensure regulatory compliance, • Evaluates project risks and issues and provides recommendations to resolve challenges impeding success, • Designing, developing, coding, testing, and debugging system software serves as a technical bridge between software Development and V&V, • Ensures rigorous adherence to design control documentation and internal procedures for post-launch activities, maintaining regulatory compliance and product quality standards, • The development of requirements-based manual test procedures, • In accessing requirements for testability and determining the best test approach, • Compilation and analysis of test results, • Documentation and management of system software defect, • Participate in regular off-hour meetings with the business partner, • Understand project goals and timelines, and provide technical leadership to ensure product launch success, • Ensures optimal resource allocation and timely project completion while maintaining quality standards, • Mentor and develop team members to help them grow professionally, • Provides critical oversight in resolving field issues and maintaining product integrity throughout the lifecycle, • Perform other work-related duties as assigned The Individual: Required: • B.S. or M.S. Degree in Computer Science, Chemistry, Biochemistry, Biology, Engineering, or a related discipline required., • 15+ years required, preferably a minimum of 10 years leading a large team in a medical device environment., • Excellent problem-solving and troubleshooting, and V&V skills to eliminate Risks, attention to detail., • Strong knowledge of software configuration management tools, defect tracking tools, and peer review, • An understanding of IEC 62304 (Medical Device Software – Lifecycle process), ISO 13485, ISO / EN ISO 14971, and FDA QSR experience or equivalent FDA software development requirements, • Strong organizational & communication skills, people management skills, and the ability to manage multiple projects, ability to prioritize tasks, and manage competing priorities effectively, • Experience in product development and experimental design, • Ability to work within cross-functional teams, • Must exhibit professionalism, confidence, maturity, desire to succeed, and a self-motivated and proactive orientation., • Ability to participate in planning and managing projects, • Strong working knowledge of product development tools and processes (e.g., Design Input, Design Output, Verification and Validation, Product Risk Management), • Strong knowledge of related quality systems regulations and processes, • Appropriate computer skills (e-mail, word processing, statistical, spreadsheet, and graphing software), • Knowledge of Application life cycle management (Agile method preferred)., • Must know and understand the software test cycle., • Coaches and mentors junior staff, provides technical leadership to cross-functional project teams, • The 10% travel includes airplane, automobile travel, and overnight hotel Include title, an overview of the position, and location (onsite, hybrid, on the road, etc)., • This position is not currently eligible for visa sponsorship. The Key Working Relationships: Internal Partners: • Software Development partners

POSITION DESCRIPTION: The Junior Packaging Engineer plays a key role in supporting the design, development, and implementation of packaging solutions that meet product protection, cost efficiency, and sustainability goals. This entry-level position is ideal for a recent graduate or early-career professional with a passion for packaging innovation and a desire to grow within a collaborative, fast-paced environment. The Junior Packaging Engineer works closely with cross-functional teams including product development, supply chain, and operations to ensure packaging solutions align with business objectives and customer expectations. ROLES & RESPONSIBILITIES: Assist in Packaging Design: • Support the creation of packaging concepts for new and existing products using CAD and prototyping tools., • Research and recommend materials based on performance, cost, and environmental impact., • Execute standard packaging tests (i.e. drop, vibration, compression) to validate performance., • Identify opportunities to reduce packaging waste and improve recyclability., • Assist in evaluating packaging designs for cost-saving opportunities., • Communicate packaging requirements to external vendors and assist in sourcing., • Work with marketing, operations, and product teams to ensure packaging meets branding and operational needs., • Support compliance with packaging regulations and industry standards (i.e. ISTA, ASTM)., • Prepare and update packaging specifications, test reports, and change records., • Participate in process improvement initiatives and lean manufacturing projects., • Suggest enhancements to packaging workflows and tools. SKILLS & EXPERIENCE: • Bachelor’s degree in Packaging Engineering, Packaging Science, or a related field., • 0-2 years of relevant experience in packaging (internships or co-ops included)., • Basic knowledge of packaging materials such as corrugate, plastics, and paperboard., • Familiarity with CAD software (i.e. ArtiosCAD, SolidWorks) and prototyping tools., • Understanding of packaging testing protocols and standards (i.e. ISTA, ASTM)., • Strong analytical and problem-solving skills., • Effective verbal and written communication skills., • Ability to work collaboratively in a cross-functional team environment., • Detail-oriented with strong organizational and documentation skills., • Eagerness to learn and grow within the packaging engineering field.